The test helps to validate clamping and mount behaviors
according to supported file system timestamp ranges.
Note that the test can fail on 32-bit systems for a
few file systems. This will be corrected when vfs is
transitioned to use 64-bit timestamps.
Signed-off-by: Deepa Dinamani <deepa.kernel(a)gmail.com>
---
The branch of the kernel tree can be located at
https://github.com/deepa-hub/vfs refs/heads/vfs_timestamp_policy
The xfs_io patch to add utimes is at
https://www.spinics.net/lists/linux-xfs/msg02952.html
Changes since v2:
* Refactored notrun handling
* Updated comments
Changes since v1:
* Use xfs_io utimes command
* Updated error handling
* Reorganized code according to review comments
common/rc | 48 +++++++++++++
tests/generic/390 | 192 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/390.out | 2 +
tests/generic/group | 1 +
4 files changed, 243 insertions(+)
create mode 100755 tests/generic/390
create mode 100644 tests/generic/390.out
diff --git a/common/rc b/common/rc
index e3b54ec..17f025e 100644
--- a/common/rc
+++ b/common/rc
@@ -1960,6 +1960,51 @@ _run_aiodio()
return $status
}
+# this test requires y2038 sysfs switch and filesystem
+# timestamp ranges support.
+_require_y2038()
+{
+ local device=${1:-$TEST_DEV}
+ local sysfsdir=/proc/sys/fs/fs-timestamp-check-on
+
+ if [ ! -e $sysfsdir ]; then
+ _notrun "no kernel support for y2038 sysfs switch"
+ fi
+
+ local tsmin tsmax
+ read tsmin tsmax <<<$(_filesystem_timestamp_range $device)
+ if [ $tsmin -eq -1 -a $tsmax -eq -1 ]; then
+ _notrun "filesystem $FSTYP timestamp bounds are unknown"
+ fi
+}
+
+_filesystem_timestamp_range()
+{
+ device=${1:-$TEST_DEV}
+ case $FSTYP in
+ ext4)
+ if [ $(dumpe2fs -h $device 2>/dev/null | grep "Inode size:" | cut -d: -f2) -gt 128 ]; then
+ echo "-2147483648 15032385535"
+ else
+ echo "-2147483648 2147483647"
+ fi
+ ;;
+
+ xfs)
+ echo "-2147483648 2147483647"
+ ;;
+ jfs)
+ echo "0 4294967295"
+ ;;
+ f2fs)
+ echo "-2147483648 2147483647"
+ ;;
+ *)
+ echo "-1 -1"
+ ;;
+ esac
+}
+
# indicate whether YP/NIS is active or not
#
_yp_active()
@@ -2070,6 +2115,9 @@ _require_xfs_io_command()
echo $testio | egrep -q "Inappropriate ioctl" && \
_notrun "xfs_io $command support is missing"
;;
+ "utimes" )
+ testio=`$XFS_IO_PROG -f -c "utimes" 0 0 0 0 $testfile 2>&1`
+ ;;
*)
testio=`$XFS_IO_PROG -c "$command help" 2>&1`
esac
diff --git a/tests/generic/390 b/tests/generic/390
new file mode 100755
index 0000000..f68b931
--- /dev/null
+++ b/tests/generic/390
@@ -0,0 +1,192 @@
+#! /bin/bash
+# FS QA Test 390
+#
+# Tests to verify policy for filesystem timestamps for
+# supported ranges:
+# 1. Verify filesystem rw mount according to sysctl
+# timestamp_supported.
+# 2. Verify timestamp clamping for timestamps beyond max
+# timestamp supported.
+#
+# Exit status 1: either or both tests above fail.
+# Exit status 0: both the above tests pass.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Deepa Dinamani. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "exit \$status" 0 1 2 3 15
+
+# Get standard environment, filters and checks.
+. ./common/rc
+. ./common/filter
+. ./common/attr
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# Prerequisites for the test run.
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_xfs_io_command utimes
+
+# Compare file timestamps obtained from stat
+# with a given timestamp.
+check_stat()
+{
+ file=$1
+ timestamp=$2
+
+ stat_timestamp=`stat -c"%X;%Y" $file`
+
+ prev_timestamp="$timestamp;$timestamp"
+ if [ $prev_timestamp != $stat_timestamp ]; then
+ echo "$prev_timestamp != $stat_timestamp" | tee -a $seqres.full
+ fi
+}
+
+run_test_individual()
+{
+ file=$1
+ timestamp=$2
+ update_time=$3
+
+ #check if the time needs update
+ if [ $update_time -eq 1 ]; then
+ echo "Updating file: $file to timestamp `date -d @$timestamp`" >> $seqres.full
+ $XFS_IO_PROG -f -c "utimes $timestamp 0 $timestamp 0" $file
+ if [ $? -ne 0 ]; then
+ echo "Failed to update times on $file" | tee -a $seqres.full
+ fi
+ fi
+
+ tsclamp=$(($timestamp>$tsmax?$tsmax:$timestamp))
+ echo "Checking file: $file Updated timestamp is `date -d @$tsclamp`" >> $seqres.full
+ check_stat $file $tsclamp
+}
+
+run_test()
+{
+ update_time=$1
+
+ n=1
+
+ for TIME in "${TIMESTAMPS[@]}"
+ do
+ #Run the test
+ run_test_individual ${SCRATCH_MNT}/test_$n $TIME $update_time
+
+ #update iterator
+ ((n++))
+ done
+}
+
+_scratch_mkfs &>> $seqres.full 2>&1 || _fail "mkfs failed"
+_require_y2038 $SCRATCH_DEV
+
+read tsmin tsmax <<<$(_filesystem_timestamp_range $SCRATCH_DEV)
+echo min supported timestamp $tsmin $(date --date=@$tsmin) >> $seqres.full
+echo max supported timestamp $tsmax $(date --date=@$tsmax) >> $seqres.full
+
+# Test timestamps array
+
+declare -a TIMESTAMPS=(
+ $tsmin
+ 0
+ $tsmax
+ $((tsmax+1))
+ 4294967295
+ 8589934591
+ 34359738367
+)
+
+# Max timestamp is hardcoded to Mon Jan 18 19:14:07 PST 2038
+sys_tsmax=2147483647
+echo "max timestamp that needs to be supported by fs for rw mount is" \
+ "$((sys_tsmax+1)) $(date --date=@$((sys_tsmax+1)))" >> $seqres.full
+
+read ts_check <<<$(cat /proc/sys/fs/fs-timestamp-check-on)
+
+_scratch_mount
+result=$?
+
+if [ $ts_check -ne 0 ]; then
+ echo "sysctl filesystem timestamp check is on" >> $seqres.full
+ # check for mount failure if the minimum requirement for max timestamp
+ # supported is not met.
+ if [ $sys_tsmax -ge $tsmax ]; then
+ if [ $result -eq 0 ]; then
+ echo "mount test failed" | tee -a $seqres.full
+ exit
+ fi
+ else
+ if [ $result -ne 0 ]; then
+ echo "failed to mount $SCRATCH_DEV" | tee -a $seqres.full
+ exit
+ fi
+ fi
+else
+ # if sysctl switch is off then mount should succeed always.
+ echo "sysctl filesystem timestamp check is off" >> $seqres.full
+ if [ $result -ne 0 ]; then
+ echo "failed to mount $SCRATCH_DEV and timestamp check is off" >> $seqres.full
+ exit
+ fi
+fi
+
+# Begin test case 1
+echo "In memory timestamps update test start" >> $seqres.full
+
+# update time on the file
+update_time=1
+
+run_test $update_time
+
+echo "In memory timestamps update complete" >> $seqres.full
+
+echo "Unmounting and mounting scratch $SCRATCH_MNT" >> $seqres.full
+
+# unmount and remount $SCRATCH_DEV
+_scratch_cycle_mount
+
+# Begin test case 2
+
+n=1
+
+# Do not update time on the file this time, just read from disk
+update_time=0
+
+echo "On disk timestamps update test start" >> $seqres.full
+
+# Re-run test
+run_test $update_time
+
+echo "On disk timestamps update test complete" >> $seqres.full
+
+echo "y2038 inode timestamp tests completed successfully"
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/390.out b/tests/generic/390.out
new file mode 100644
index 0000000..82bd4eb
--- /dev/null
+++ b/tests/generic/390.out
@@ -0,0 +1,2 @@
+QA output created by 390
+y2038 inode timestamp tests completed successfully
diff --git a/tests/generic/group b/tests/generic/group
index 08007d7..d137d01 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -392,3 +392,4 @@
387 auto clone
388 auto log metadata
389 auto quick acl
+390 auto quick rw
--
2.7.4
The series is a preparation series for individual architectures
to use 64 bit time_t syscalls in compat and 32 bit emulation modes.
This is a follow up to the series Arnd Bergmann posted:
https://sourceware.org/ml/libc-alpha/2015-05/msg00070.html [1]
Big picture is as per the lwn article:
https://lwn.net/Articles/643234/ [2]
The series is directed at converting posix clock syscalls:
clock_gettime, clock_settime, clock_getres and clock_nanosleep
to use a new data structure __kernel_timespec at syscall boundaries.
__kernel_timespec maintains 64 bit time_t across all execution modes.
vdso will be handled as part of each architecture when they enable
support for 64 bit time_t.
The compat syscalls are repurposed to provide backward compatibility
by using them as native syscalls as well for 32 bit architectures.
They will continue to use timespec at syscall boundaries.
CONFIG_64_BIT_TIME controls whether the syscalls use __kernel_timespec
or timespec at syscall boundaries.
The series does the following:
1. Enable compat syscalls on 32 bit architectures.
2. Add a new __kernel_timespec type to be used as the data structure
for all the new syscalls.
3. Add new config CONFIG_64BIT_TIME(intead of the CONFIG_COMPAT_TIME in
[1] and [2] to switch to new definition of __kernel_timespec. It is
the same as struct timespec otherwise.
4. Add new CONFIG_32BIT_TIME to conditionally compile compat syscalls.
* Changes since v2:
* Dropped the ARCH_HAS_64BIT_TIME config.
* Fixed zeroing out of higher order bits of tv_nsec for real.
* Addressed minor review comments from v1.
* Changes since v1:
* Introduce CONFIG_32BIT_TIME
* Fixed zeroing out of higher order bits of tv_nsec
* Included Arnd's changes to fix up use of compat headers
I decided against using LEGACY_TIME_SYSCALLS to conditionally compile
legacy time syscalls such as sys_nanosleep because this will need to
enclose compat_sys_nanosleep as well. So, defining it as
config LEGACY_TIME_SYSCALLS
def_bool 64BIT || !64BIT_TIME
will not include compat_sys_nanosleep. We will instead need a new config to
exclusively mark legacy syscalls.
Deepa Dinamani (10):
compat: Make compat helpers independent of CONFIG_COMPAT
include: Move compat_timespec/ timeval to compat_time.h
compat: enable compat_get/put_timespec64 always
arch: introduce CONFIG_64BIT_TIME
arch: Introduce CONFIG_COMPAT_32BIT_TIME
posix-clocks: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
include: Add new y2038 safe __kernel_timespec
fix get_timespec64() for y2038 safe compat interfaces
change time types to new y2038 safe __kernel_* types
nanosleep: change time types to safe __kernel_* types
arch/Kconfig | 15 +++++++++
arch/arm64/include/asm/compat.h | 11 -------
arch/arm64/include/asm/stat.h | 1 +
arch/arm64/kernel/hw_breakpoint.c | 1 -
arch/arm64/kernel/perf_regs.c | 2 +-
arch/arm64/kernel/process.c | 1 -
arch/mips/include/asm/compat.h | 11 -------
arch/mips/kernel/signal32.c | 2 +-
arch/parisc/include/asm/compat.h | 11 -------
arch/powerpc/include/asm/compat.h | 11 -------
arch/powerpc/kernel/asm-offsets.c | 2 +-
arch/powerpc/oprofile/backtrace.c | 2 +-
arch/s390/hypfs/hypfs_sprp.c | 1 -
arch/s390/include/asm/compat.h | 11 -------
arch/s390/include/asm/elf.h | 3 +-
arch/s390/kvm/priv.c | 1 -
arch/s390/pci/pci_clp.c | 1 -
arch/sparc/include/asm/compat.h | 11 -------
arch/tile/include/asm/compat.h | 11 -------
arch/x86/events/core.c | 2 +-
arch/x86/include/asm/compat.h | 11 -------
arch/x86/include/asm/ftrace.h | 2 +-
arch/x86/include/asm/sys_ia32.h | 2 +-
arch/x86/kernel/sys_x86_64.c | 2 +-
drivers/s390/block/dasd_ioctl.c | 1 -
drivers/s390/char/fs3270.c | 1 -
drivers/s390/char/sclp_ctl.c | 1 -
drivers/s390/char/vmcp.c | 1 -
drivers/s390/cio/chsc_sch.c | 1 -
drivers/s390/net/qeth_core_main.c | 2 +-
include/linux/compat.h | 11 ++++---
include/linux/compat_time.h | 23 ++++++++++++++
include/linux/restart_block.h | 7 ++--
include/linux/syscalls.h | 12 +++----
include/linux/time.h | 4 +--
include/linux/time64.h | 10 +++++-
include/uapi/asm-generic/posix_types.h | 1 +
include/uapi/linux/time.h | 7 ++++
kernel/compat.c | 52 +++++-------------------------
kernel/time/hrtimer.c | 10 ++++--
kernel/time/posix-stubs.c | 12 ++++---
kernel/time/posix-timers.c | 24 ++++++++++----
kernel/time/time.c | 58 +++++++++++++++++++++++++++++++---
43 files changed, 176 insertions(+), 190 deletions(-)
create mode 100644 include/linux/compat_time.h
base-commit: 8418f88764046d0e8ca6a3c04a69a0e57189aa1e
--
2.14.1
Cc: acme(a)kernel.org
Cc: benh(a)kernel.crashing.org
Cc: borntraeger(a)de.ibm.com
Cc: catalin.marinas(a)arm.com
Cc: cmetcalf(a)mellanox.com
Cc: cohuck(a)redhat.com
Cc: davem(a)davemloft.net
Cc: deller(a)gmx.de
Cc: devel(a)driverdev.osuosl.org
Cc: gerald.schaefer(a)de.ibm.com
Cc: gregkh(a)linuxfoundation.org
Cc: heiko.carstens(a)de.ibm.com
Cc: hoeppner(a)linux.vnet.ibm.com
Cc: hpa(a)zytor.com
Cc: jejb(a)parisc-linux.org
Cc: jwi(a)linux.vnet.ibm.com
Cc: linux-api(a)vger.kernel.org
Cc: linux-arch(a)vger.kernel.org
Cc: linux-kernel(a)vger.kernel.org
Cc: linux-mips(a)linux-mips.org
Cc: linux-parisc(a)vger.kernel.org
Cc: linuxppc-dev(a)lists.ozlabs.org
Cc: linux-s390(a)vger.kernel.org
Cc: mark.rutland(a)arm.com
Cc: mingo(a)redhat.com
Cc: mpe(a)ellerman.id.au
Cc: oberpar(a)linux.vnet.ibm.com
Cc: oprofile-list(a)lists.sf.net
Cc: paulus(a)samba.org
Cc: peterz(a)infradead.org
Cc: ralf(a)linux-mips.org
Cc: rostedt(a)goodmis.org
Cc: rric(a)kernel.org
Cc: schwidefsky(a)de.ibm.com
Cc: sebott(a)linux.vnet.ibm.com
Cc: sparclinux(a)vger.kernel.org
Cc: sth(a)linux.vnet.ibm.com
Cc: ubraun(a)linux.vnet.ibm.com
Cc: will.deacon(a)arm.com
Cc: x86(a)kernel.org