Hi,

On Thu, Jan 5, 2017 at 10:11 AM, Ajith Kumar Kumsi
<ajithkumar.kumsi@inedasystems.com> wrote:
> Hi,
>
> While porting Op-tee.elf on ARM A5 board, it is giving a data abort.
>
> I further tried to debug the code, and I could see that in generic_boot.c
> inside "init_runtime" function when malloc_add_pool(__heap1_start,
> __heap1_end - __heap1_start) is called, __mutex_lock is getting called and
> when cpu_spin_lock(&m->spin_lock) is called
> at the below point it gives a data abort exception after "cmp r1,
> #SPINLOCK_UNLOCK".
>
> _spinlock_loop:
>     ldrex r1, [r0]
>     cmp r1, #SPINLOCK_UNLOCK
>     wfene
>
> Can you let me know if I need to make any modifications to make it work.

That piece of code is used by other platforms so I guess the problem
is with the input. What's in r0 would give some clue, because it's
supposed to point ot spinlock within __malloc_mu

Regards,
Jens

>
> Regards,
> Ajith
>
> ________________________________
> From: Jens Wiklander <jens.wiklander@linaro.org>
> Sent: Tuesday, November 29, 2016 6:25:53 PM
> To: Ajith Kumar Kumsi
> Cc: tee-dev@lists.linaro.org
> Subject: Re: [Tee-dev] OpTee porting on ARMv7
>
>
>
> On Tue, Nov 29, 2016 at 1:31 PM, Ajith Kumar Kumsi
> <ajithkumar.kumsi@inedasystems.com> wrote:
>>
>>
>> Hi,
>>
>> Thank you for the reply.
>>
>> As suggested, I have gone through the
>> http://www.slideshare.net/linaroorg/lcu14-302-how-to-port-optee-to-another-platform
>> and https://github.com/OP-TEE/optee_os#3-platforms-supported
>>
>> I have downloaded optee_os.
>>
>> I have gone through the other platforms given under
>> "optee_os/core/arch/arm" and created a new platform and modified changes in
>> platform_config.h, conf.mk, main.c, uart.c, uart.h files accordingly related
>> to the new platform (arm7v-a (cortex a5)).
>>
>> I tried to export the platform to the new-platform name and tried to build
>> using "make".
>>
>> I can see that tee.bin got generate in optee_os/out/arm-plat-new/core.
>>
>> I tried to flash tee.elf in to SRAM and I tried to debug using eclipse, I
>> can see that it is getting halted at
>> optee_os/core/arch/arm/kernel/generic_entry_a32.S at line 58.
>>
>>  FUNC _start , :
>>
>>      58         b       .       /* Data abort */
>>
>> Please suggest me on how to proceed further in this regard.
>
>
> Since you've obviously got a data abort I'd suggest checking LR and DFAR for
> more clues to the abort.
>
> Regards,
> Jens
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please visit http://www.symanteccloud.com
> ______________________________________________________________________
> This email and any files transmitted with it are confidential and intended
> solely for the use of the individual or entity to whom they are addressed.
> If you have received this email in error please notify the system manager.
> This message contains confidential information and is intended only for the
> individual named. If you are not the named addressee you should not
> disseminate, distribute or copy this e-mail. Please notify the sender
> immediately by e-mail if you have received this e-mail by mistake and delete
> this e-mail from your system. If you are not the intended recipient you are
> notified that disclosing, copying, distributing or taking any action in
> reliance on the contents of this information is strictly prohibited.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________