Tee-dev August 2020

tee-dev@lists.linaro.org

6 participants
9 discussions

[PATCH v1] tee: optee: Use UUID API for exporting the UUID

by Andy Shevchenko

There is export_uuid() function which exports uuid_t to the u8 array. Use it instead of open coding variant. This allows to hide the uuid_t internals. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- drivers/tee/optee/device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c index e3a148521ec1d..2ecc6993f48bb 100644 --- a/drivers/tee/optee/device.c +++ b/drivers/tee/optee/device.c @@ -107,7 +107,7 @@ int optee_enumerate_devices(void) return -ENODEV; /* Open session with device enumeration pseudo TA */ - memcpy(sess_arg.uuid, pta_uuid.b, TEE_IOCTL_UUID_LEN); + export_uuid(sess_arg.uuid, &pta_uuid); sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC; sess_arg.num_params = 0; -- 2.26.1

4 years, 1 month

[PATCHv2] drivers: optee: fix i2c build issue

by Jorge Ramirez-Ortiz

When the optee driver is compiled into the kernel while the i2c core is configured as a module, the i2c symbols are not available. This commit addresses the situation by disabling the i2c support for this use case while allowing it in all other scenarios: i2c=y, optee=y i2c=m, optee=m i2c=y, optee=m i2c=m, optee=y (not supported) Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Jorge Ramirez-Ortiz <jorge(a)foundries.io> --- v2: uses IS_REACHABLE instead of macro combination This patch applies on top of https://git.linaro.org/people/jens.wiklander/linux-tee.git/tag/?h=optee-i2c… drivers/tee/optee/rpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index 64a206c56264..1e3614e4798f 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -50,7 +50,7 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg) arg->ret = TEEC_ERROR_BAD_PARAMETERS; } -#if IS_ENABLED(CONFIG_I2C) +#if IS_REACHABLE(CONFIG_I2C) static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, struct optee_msg_arg *arg) { -- 2.17.1

4 years, 2 months

[PATCH] drivers: optee: fix i2c build issue

by Jorge Ramirez-Ortiz

When the optee driver is compiled into the kernel while the i2c core is configured as a module, the i2c symbols are not available. This commit addresses the situation by disabling the i2c support for this use case while allowing it in all other scenarios: i2c=y, optee=y i2c=m, optee=m i2c=y, optee=m i2c=m, optee=y (not supported) Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Jorge Ramirez-Ortiz <jorge(a)foundries.io> --- This patch applies on top of https://git.linaro.org/people/jens.wiklander/linux-tee.git/tag/?h=optee-i2c… drivers/tee/optee/rpc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index 64a206c56264..96e91d5f0a86 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -51,6 +51,7 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg) } #if IS_ENABLED(CONFIG_I2C) +#if !defined(CONFIG_I2C_MODULE) || defined(CONFIG_OPTEE_MODULE) static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, struct optee_msg_arg *arg) { @@ -140,6 +141,7 @@ static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, arg->ret = TEEC_ERROR_NOT_SUPPORTED; } #endif +#endif static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key) { -- 2.17.1

4 years, 2 months

[GIT PULL] tee subsystem pin_user_pages for v5.8

by Jens Wiklander

Hello arm-soc maintainers, Please pull this small patch converting the tee subsystem to use pin_user_pages() instead of get_user_pages(). Thanks, Jens The following changes since commit ae83d0b416db002fe95601e7f97f64b59514d936: Linux 5.7-rc2 (2020-04-19 14:35:30 -0700) are available in the Git repository at: git://git.linaro.org:/people/jens.wiklander/linux-tee.git tags/tee-pin-user-pages-for-5.8 for you to fetch changes up to 37f6b4d5f47b600ec4ab6682c005a44a1bfca530: tee: convert get_user_pages() --> pin_user_pages() (2020-05-26 10:42:41 +0200) ---------------------------------------------------------------- Converts tee subsystem to use pin_user_pages() instead of get_user_pages() ---------------------------------------------------------------- John Hubbard (1): tee: convert get_user_pages() --> pin_user_pages() drivers/tee/tee_shm.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)

4 years, 3 months

OP-TEE 3.10.0 has been released

by Jerome Forissier

[BCC all OP-TEE maintainers] Hi, FYI, I have just finalized the OP-TEE 3.10.0 release (changelog [1]). Many thanks to all of you who contributed to this release by submitting or reviewing code, or taking part in release testing [2]. [1] https://github.com/OP-TEE/optee_os/blob/3.10.0/CHANGELOG.md [2] https://github.com/OP-TEE/optee_os/commit/d1c635434c55 Regards, -- Jerome

4 years, 3 months

[PATCHv9] drivers: optee: allow op-tee to access devices on the i2c bus

by Jorge Ramirez-Ortiz

Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to control this type of cryptographic devices it needs coordinated access to the bus, so collisions and RUNTIME_PM dont get in the way. This trampoline driver allow OP-TEE to access them. Signed-off-by: Jorge Ramirez-Ortiz <jorge(a)foundries.io> --- v9: params return value must be written before optee_msg_to_param is called v8: review fixes: fix types and add TEEC_ERROR_NOT_SUPPORTED to GP errors v7: add support for ten bit i2c slave addressing v6: compile out if CONFIG_I2C not enabled v5: alphabetic order of includes v4: remove unnecessary extra line in optee_msg.h v3: use from/to msg param to support all types of memory modify OPTEE_MSG_RPC_CMD_I2C_TRANSFER message id drivers/tee/optee/optee_msg.h | 21 +++++++ drivers/tee/optee/optee_private.h | 1 + drivers/tee/optee/rpc.c | 95 +++++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+) diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 795bc19ae17a..7b2d919da2ac 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -419,4 +419,25 @@ struct optee_msg_arg { */ #define OPTEE_MSG_RPC_CMD_SHM_FREE 7 +/* + * Access a device on an i2c bus + * + * [in] param[0].u.value.a mode: RD(0), WR(1) + * [in] param[0].u.value.b i2c adapter + * [in] param[0].u.value.c i2c chip + * + * [in] param[1].u.value.a i2c control flags + * + * [in/out] memref[2] buffer to exchange the transfer data + * with the secure world + * + * [out] param[3].u.value.a bytes transferred by the driver + */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21 +/* I2C master transfer modes */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0 +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1 +/* I2C master control flags */ +#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0) + #endif /* _OPTEE_MSG_H */ diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 8b71839a357e..564116d6cc58 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -17,6 +17,7 @@ /* Some Global Platform error codes used in this driver */ #define TEEC_SUCCESS 0x00000000 #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 +#define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A #define TEEC_ERROR_COMMUNICATION 0xFFFF000E #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index b4ade54d1f28..64a206c56264 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@ #include <linux/delay.h> #include <linux/device.h> +#include <linux/i2c.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -49,6 +50,97 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg) arg->ret = TEEC_ERROR_BAD_PARAMETERS; } +#if IS_ENABLED(CONFIG_I2C) +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, + struct optee_msg_arg *arg) +{ + struct i2c_client client = { 0 }; + struct tee_param *params; + size_t i; + int ret = -EOPNOTSUPP; + u8 attr[] = { + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT, + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT, + }; + + if (arg->num_params != ARRAY_SIZE(attr)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + params = kmalloc_array(arg->num_params, sizeof(struct tee_param), + GFP_KERNEL); + if (!params) { + arg->ret = TEEC_ERROR_OUT_OF_MEMORY; + return; + } + + if (optee_from_msg_param(params, arg->num_params, arg->params)) + goto bad; + + for (i = 0; i < arg->num_params; i++) { + if (params[i].attr != attr[i]) + goto bad; + } + + client.adapter = i2c_get_adapter(params[0].u.value.b); + if (!client.adapter) + goto bad; + + if (params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) { + if (!i2c_check_functionality(client.adapter, + I2C_FUNC_10BIT_ADDR)) { + i2c_put_adapter(client.adapter); + goto bad; + } + + client.flags = I2C_CLIENT_TEN; + } + + client.addr = params[0].u.value.c; + snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr); + + switch (params[0].u.value.a) { + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD: + ret = i2c_master_recv(&client, params[2].u.memref.shm->kaddr, + params[2].u.memref.size); + break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR: + ret = i2c_master_send(&client, params[2].u.memref.shm->kaddr, + params[2].u.memref.size); + break; + default: + i2c_put_adapter(client.adapter); + goto bad; + } + + if (ret < 0) { + arg->ret = TEEC_ERROR_COMMUNICATION; + } else { + params[3].u.value.a = ret; + if (optee_to_msg_param(arg->params, arg->num_params, params)) + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + else + arg->ret = TEEC_SUCCESS; + } + + i2c_put_adapter(client.adapter); + kfree(params); + return; +bad: + kfree(params); + arg->ret = TEEC_ERROR_BAD_PARAMETERS; +} +#else +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, + struct optee_msg_arg *arg) +{ + arg->ret = TEEC_ERROR_NOT_SUPPORTED; +} +#endif + static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key) { struct wq_entry *w; @@ -382,6 +474,9 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_MSG_RPC_CMD_SHM_FREE: handle_rpc_func_cmd_shm_free(ctx, arg); break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER: + handle_rpc_func_cmd_i2c_transfer(ctx, arg); + break; default: handle_rpc_supp_cmd(ctx, arg); } -- 2.17.1

4 years, 3 months

[PATCHv8] drivers: optee: allow op-tee to access devices on the i2c bus

by Jorge Ramirez-Ortiz

Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to control this type of cryptographic devices it needs coordinated access to the bus, so collisions and RUNTIME_PM dont get in the way. This trampoline driver allow OP-TEE to access them. Signed-off-by: Jorge Ramirez-Ortiz <jorge(a)foundries.io> --- v8: review fixes fix types and add TEEC_ERROR_NOT_SUPPORTED to GP errors v7: add support for ten bit i2c slave addressing v6: compile out if CONFIG_I2C not enabled v5: alphabetic order of includes v4: remove unnecessary extra line in optee_msg.h v3: use from/to msg param to support all types of memory modify OPTEE_MSG_RPC_CMD_I2C_TRANSFER message id drivers/tee/optee/optee_msg.h | 21 +++++++ drivers/tee/optee/optee_private.h | 1 + drivers/tee/optee/rpc.c | 96 +++++++++++++++++++++++++++++++ 3 files changed, 118 insertions(+) diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 795bc19ae17a..7b2d919da2ac 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -419,4 +419,25 @@ struct optee_msg_arg { */ #define OPTEE_MSG_RPC_CMD_SHM_FREE 7 +/* + * Access a device on an i2c bus + * + * [in] param[0].u.value.a mode: RD(0), WR(1) + * [in] param[0].u.value.b i2c adapter + * [in] param[0].u.value.c i2c chip + * + * [in] param[1].u.value.a i2c control flags + * + * [in/out] memref[2] buffer to exchange the transfer data + * with the secure world + * + * [out] param[3].u.value.a bytes transferred by the driver + */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21 +/* I2C master transfer modes */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0 +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1 +/* I2C master control flags */ +#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0) + #endif /* _OPTEE_MSG_H */ diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 8b71839a357e..564116d6cc58 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -17,6 +17,7 @@ /* Some Global Platform error codes used in this driver */ #define TEEC_SUCCESS 0x00000000 #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006 +#define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A #define TEEC_ERROR_COMMUNICATION 0xFFFF000E #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010 diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index b4ade54d1f28..cc9ad4b68d40 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@ #include <linux/delay.h> #include <linux/device.h> +#include <linux/i2c.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -49,6 +50,98 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg) arg->ret = TEEC_ERROR_BAD_PARAMETERS; } +#if IS_ENABLED(CONFIG_I2C) +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, + struct optee_msg_arg *arg) +{ + struct i2c_client client = { 0 }; + struct tee_param *params; + size_t i; + int ret = -EOPNOTSUPP; + u8 attr[] = { + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT, + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT, + }; + + if (arg->num_params != ARRAY_SIZE(attr)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + params = kmalloc_array(arg->num_params, sizeof(struct tee_param), + GFP_KERNEL); + if (!params) { + arg->ret = TEEC_ERROR_OUT_OF_MEMORY; + return; + } + + if (optee_from_msg_param(params, arg->num_params, arg->params)) + goto bad; + + for (i = 0; i < arg->num_params; i++) { + if (params[i].attr != attr[i]) + goto bad; + } + + client.adapter = i2c_get_adapter(params[0].u.value.b); + if (!client.adapter) + goto bad; + + if (params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) { + if (!i2c_check_functionality(client.adapter, + I2C_FUNC_10BIT_ADDR)) { + i2c_put_adapter(client.adapter); + goto bad; + } + + client.flags = I2C_CLIENT_TEN; + } + + client.addr = params[0].u.value.c; + snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr); + + switch (params[0].u.value.a) { + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD: + ret = i2c_master_recv(&client, params[2].u.memref.shm->kaddr, + params[2].u.memref.size); + break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR: + ret = i2c_master_send(&client, params[2].u.memref.shm->kaddr, + params[2].u.memref.size); + break; + default: + i2c_put_adapter(client.adapter); + goto bad; + } + + if (ret < 0) { + arg->ret = TEEC_ERROR_COMMUNICATION; + } else { + if (optee_to_msg_param(arg->params, arg->num_params, params)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + } else { + params[3].u.value.a = ret; + arg->ret = TEEC_SUCCESS; + } + } + + i2c_put_adapter(client.adapter); + kfree(params); + return; +bad: + kfree(params); + arg->ret = TEEC_ERROR_BAD_PARAMETERS; +} +#else +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, + struct optee_msg_arg *arg) +{ + arg->ret = TEEC_ERROR_NOT_SUPPORTED; +} +#endif + static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key) { struct wq_entry *w; @@ -382,6 +475,9 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_MSG_RPC_CMD_SHM_FREE: handle_rpc_func_cmd_shm_free(ctx, arg); break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER: + handle_rpc_func_cmd_i2c_transfer(ctx, arg); + break; default: handle_rpc_supp_cmd(ctx, arg); } -- 2.17.1

4 years, 3 months

[PATCHv7] drivers: optee: allow op-tee to access devices on the i2c bus

by Jorge Ramirez-Ortiz

Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to control this type of cryptographic devices it needs coordinated access to the bus, so collisions and RUNTIME_PM dont get in the way. This trampoline driver allow OP-TEE to access them. Signed-off-by: Jorge Ramirez-Ortiz <jorge(a)foundries.io> --- v7: add support for ten bit i2c slave addressing v6: compile out if CONFIG_I2C not enabled v5: alphabetic order of includes v4: remove unnecessary extra line in optee_msg.h v3: use from/to msg param to support all types of memory modify OPTEE_MSG_RPC_CMD_I2C_TRANSFER message id drivers/tee/optee/optee_msg.h | 21 ++++++++ drivers/tee/optee/rpc.c | 95 +++++++++++++++++++++++++++++++++++ 2 files changed, 116 insertions(+) diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 795bc19ae17a..7b2d919da2ac 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -419,4 +419,25 @@ struct optee_msg_arg { */ #define OPTEE_MSG_RPC_CMD_SHM_FREE 7 +/* + * Access a device on an i2c bus + * + * [in] param[0].u.value.a mode: RD(0), WR(1) + * [in] param[0].u.value.b i2c adapter + * [in] param[0].u.value.c i2c chip + * + * [in] param[1].u.value.a i2c control flags + * + * [in/out] memref[2] buffer to exchange the transfer data + * with the secure world + * + * [out] param[3].u.value.a bytes transferred by the driver + */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21 +/* I2C master transfer modes */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0 +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1 +/* I2C master control flags */ +#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0) + #endif /* _OPTEE_MSG_H */ diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index b4ade54d1f28..b6178761d79f 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@ #include <linux/delay.h> #include <linux/device.h> +#include <linux/i2c.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -49,6 +50,97 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg) arg->ret = TEEC_ERROR_BAD_PARAMETERS; } +#if IS_ENABLED(CONFIG_I2C) +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, + struct optee_msg_arg *arg) +{ + struct i2c_client client = { 0 }; + struct tee_param *params; + int i, ret = -EOPNOTSUPP; + uint32_t attr[] = { + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT, + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT, + }; + + if (arg->num_params != ARRAY_SIZE(attr)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + params = kmalloc_array(arg->num_params, sizeof(struct tee_param), + GFP_KERNEL); + if (!params) { + arg->ret = TEEC_ERROR_OUT_OF_MEMORY; + return; + } + + if (optee_from_msg_param(params, arg->num_params, arg->params)) + goto bad; + + for (i = 0; i < arg->num_params; i++) { + if ((params[i].attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) + != attr[i]) + goto bad; + } + + client.adapter = i2c_get_adapter(params[0].u.value.b); + if (!client.adapter) + goto bad; + + if (params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT) { + if (!i2c_check_functionality(client.adapter, + I2C_FUNC_10BIT_ADDR)) { + i2c_put_adapter(client.adapter); + goto bad; + } + + client.flags = I2C_CLIENT_TEN; + } + + client.addr = params[0].u.value.c; + snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr); + + switch (params[0].u.value.a) { + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD: + ret = i2c_master_recv(&client, params[2].u.memref.shm->kaddr, + params[2].u.memref.size); + break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR: + ret = i2c_master_send(&client, params[2].u.memref.shm->kaddr, + params[2].u.memref.size); + break; + default: + i2c_put_adapter(client.adapter); + goto bad; + } + + if (ret < 0) { + arg->ret = TEEC_ERROR_COMMUNICATION; + } else { + params[3].u.value.a = ret; + arg->ret = TEEC_SUCCESS; + + if (optee_to_msg_param(arg->params, arg->num_params, params)) + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + } + + i2c_put_adapter(client.adapter); + kfree(params); + return; +bad: + kfree(params); + arg->ret = TEEC_ERROR_BAD_PARAMETERS; +} +#else +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, + struct optee_msg_arg *arg) +{ + arg->ret = TEEC_ERROR_COMMUNICATION; +} +#endif + static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key) { struct wq_entry *w; @@ -382,6 +474,9 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_MSG_RPC_CMD_SHM_FREE: handle_rpc_func_cmd_shm_free(ctx, arg); break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER: + handle_rpc_func_cmd_i2c_transfer(ctx, arg); + break; default: handle_rpc_supp_cmd(ctx, arg); } -- 2.17.1

4 years, 3 months

[PATCHv6] drivers: optee: allow op-tee to access devices on the i2c bus

by Jorge Ramirez-Ortiz

Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to control this type of cryptographic devices it needs coordinated access to the bus, so collisions and RUNTIME_PM dont get in the way. This trampoline driver allow OP-TEE to access them. Tested on imx8mm LPDDR4 Signed-off-by: Jorge Ramirez-Ortiz <jorge(a)foundries.io> --- v6: compile out if CONFIG_I2C not enabled v5: alphabetic order of includes v4: remove unnecessary extra line in optee_msg.h v3: use from/to msg param to support all types of memory modify OPTEE_MSG_RPC_CMD_I2C_TRANSFER message id drivers/tee/optee/optee_msg.h | 16 +++++++ drivers/tee/optee/rpc.c | 88 +++++++++++++++++++++++++++++++++++ 2 files changed, 104 insertions(+) diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h index 795bc19ae17a..14b580f55356 100644 --- a/drivers/tee/optee/optee_msg.h +++ b/drivers/tee/optee/optee_msg.h @@ -419,4 +419,20 @@ struct optee_msg_arg { */ #define OPTEE_MSG_RPC_CMD_SHM_FREE 7 +/* + * Access a device on an i2c bus + * + * [in] param[0].u.value.a mode: RD(0), WR(1) + * [in] param[0].u.value.b i2c adapter + * [in] param[0].u.value.c i2c chip + * + * [in/out] memref[1] buffer to exchange the transfer data + * with the secure world + * + * [out] param[0].u.value.a bytes transferred by the driver + */ +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21 +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0 +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1 + #endif /* _OPTEE_MSG_H */ diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c index b4ade54d1f28..5fd5c6c93896 100644 --- a/drivers/tee/optee/rpc.c +++ b/drivers/tee/optee/rpc.c @@ -7,6 +7,7 @@ #include <linux/delay.h> #include <linux/device.h> +#include <linux/i2c.h> #include <linux/slab.h> #include <linux/tee_drv.h> #include "optee_private.h" @@ -49,6 +50,90 @@ static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg) arg->ret = TEEC_ERROR_BAD_PARAMETERS; } +#if IS_ENABLED(CONFIG_I2C) +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, + struct optee_msg_arg *arg) +{ + struct i2c_client client; + struct tee_param *params; + uint32_t type; + int i, ret; + size_t len; + char *buf; + uint32_t attr[] = { + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT, + TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT, + TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT, + }; + + if (arg->num_params != ARRAY_SIZE(attr)) { + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + return; + } + + params = kmalloc_array(arg->num_params, sizeof(struct tee_param), + GFP_KERNEL); + if (!params) { + arg->ret = TEEC_ERROR_OUT_OF_MEMORY; + return; + } + + if (optee_from_msg_param(params, arg->num_params, arg->params)) + goto bad; + + for (i = 0; i < arg->num_params; i++) { + type = params[i].attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK; + if (type != attr[i]) + goto bad; + } + + client.addr = params[0].u.value.c; + client.adapter = i2c_get_adapter(params[0].u.value.b); + if (!client.adapter) + goto bad; + + snprintf(client.name, I2C_NAME_SIZE, "i2c%d", client.adapter->nr); + + buf = params[1].u.memref.shm->kaddr; + len = params[1].u.memref.size; + + switch (params[0].u.value.a) { + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD: + ret = i2c_master_recv(&client, buf, len); + break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR: + ret = i2c_master_send(&client, buf, len); + break; + default: + i2c_put_adapter(client.adapter); + goto bad; + } + + if (ret >= 0) { + params[2].u.value.a = ret; + arg->ret = TEEC_SUCCESS; + } else { + arg->ret = TEEC_ERROR_COMMUNICATION; + } + + if (optee_to_msg_param(arg->params, arg->num_params, params)) + arg->ret = TEEC_ERROR_BAD_PARAMETERS; + + i2c_put_adapter(client.adapter); + kfree(params); + return; +bad: + kfree(params); + arg->ret = TEEC_ERROR_BAD_PARAMETERS; +} +#else +static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx, + struct optee_msg_arg *arg) +{ + arg->ret = TEEC_ERROR_COMMUNICATION; +} +#endif + static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key) { struct wq_entry *w; @@ -382,6 +467,9 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee, case OPTEE_MSG_RPC_CMD_SHM_FREE: handle_rpc_func_cmd_shm_free(ctx, arg); break; + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER: + handle_rpc_func_cmd_i2c_transfer(ctx, arg); + break; default: handle_rpc_supp_cmd(ctx, arg); } -- 2.17.1

4 years, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

Tee-dev August 2020