This is an automated email from the git hooks/post-receive script.

bernie.ogden pushed a commit to branch bernie/jenkmarking-multinode in repository toolchain/abe.

The following commit(s) were added to refs/heads/bernie/jenkmarking-multinode by th [...] new 9797214 Strip out all references to lava 9797214 is described below

commit 9797214c97bb008f2660fda88b206206cda1fe24 Author: Bernard Ogden bernie.ogden@linaro.org Date: Wed Jul 22 14:28:03 2015 +0200

Strip out all references to lava

Change-Id: Ic970aedc7f32a32d4ca052cf8da9f399e146d5f8 --- config/boards/bench/arndale.conf | 3 +- config/boards/bench/arndale.json | 40 ----- config/boards/bench/juno-a53.conf | 2 +- config/boards/bench/juno-a53.json | 41 ----- config/boards/bench/juno-a57.conf | 2 +- config/boards/bench/juno-a57.json | 41 ----- config/boards/bench/kvm.conf | 2 +- config/boards/bench/kvm.json | 39 ----- config/boards/bench/panda-es.conf | 3 +- config/boards/bench/panda-es.json | 41 ----- scripts/benchmark.sh | 10 +- scripts/benchutil.sh | 51 ------ scripts/lava.sh | 356 -------------------------------------- scripts/runbenchmark.sh | 103 +---------- 14 files changed, 12 insertions(+), 722 deletions(-)

diff --git a/config/boards/bench/arndale.conf b/config/boards/bench/arndale.conf index 46b1fb4..00644a4 100644 --- a/config/boards/bench/arndale.conf +++ b/config/boards/bench/arndale.conf @@ -3,8 +3,7 @@ netctl=yes freq=900MHz benchcore=0 othercore=1 -ip=arndale.json -#ip=linaro@10.2.201.83 +ip= boot_timeout=90

#Avoid spaces within parameters, they aren't worth the heartache diff --git a/config/boards/bench/arndale.json b/config/boards/bench/arndale.json deleted file mode 100644 index 705e940..0000000 --- a/config/boards/bench/arndale.json +++ /dev/null @@ -1,40 +0,0 @@ -{ - "job_name": "", - "device_type": "arndale", - "timeout": 691200, - "actions": [ - { - "command": "deploy_linaro_image", - "parameters": { - "image": "http://people.linaro.org/~bernie.ogden/arndale/arndale.img" - } - }, - { - "command": "lava_test_shell", - "parameters": { - "testdef_repos": [ - { - "git-repo": "http://git.linaro.org/toolchain/lavabench.git", - "testdef": "bench-session-debian.yaml", - "parameters": { - "GATEWAY": "10.0.0.1", - "PUB_KEY": "", - "LISTENER_ADDR": "", - "LISTENER_PORT": "" - } - } - ], - "timeout": 691200 - } - }, - { - "command": "submit_results", - "parameters": - { - "server": "", - "stream": "" - } - } - - ] -} diff --git a/config/boards/bench/juno-a53.conf b/config/boards/bench/juno-a53.conf index 4a8dfcb..7512aed 100644 --- a/config/boards/bench/juno-a53.conf +++ b/config/boards/bench/juno-a53.conf @@ -3,7 +3,7 @@ netctl=yes freq= benchcore=1 othercore=0 -ip=juno-a53.json +ip= boot_timeout=90

#Avoid spaces within parameters, they aren't worth the heartache diff --git a/config/boards/bench/juno-a53.json b/config/boards/bench/juno-a53.json deleted file mode 100644 index 937dd10..0000000 --- a/config/boards/bench/juno-a53.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "job_name": "", - "device_type": "juno", - "tags": [ "serial-console-server" ], - "timeout": 691200, - "actions": [ - { - "command": "deploy_linaro_image", - "parameters": { - "hwpack": "http://people.linaro.org/~bernie.ogden/hwpack_linaro-lt [...] - "rootfs": "http://people.linaro.org/~bernie.ogden/linaro-utopic-de [...] - } - }, - { - "command": "lava_test_shell", - "parameters": { - "testdef_repos": [ - { - "git-repo": "git://git.linaro.org/toolchain/lavabench.git", - "testdef": "bench-session-debian.yaml", - "parameters": { - "GATEWAY": "10.0.0.1", - "PUB_KEY": "", - "LISTENER_ADDR": "", - "LISTENER_PORT": "" - } - } - ], - "timeout": 691200 - } - }, - { - "command": "submit_results", - "parameters": { - "server": "", - "stream": "" - } - } - ] -} - diff --git a/config/boards/bench/juno-a57.conf b/config/boards/bench/juno-a57.conf index 59b9c13..3798f05 100644 --- a/config/boards/bench/juno-a57.conf +++ b/config/boards/bench/juno-a57.conf @@ -3,7 +3,7 @@ netctl=yes freq= benchcore=5 othercore=0 -ip=juno-a57.json +ip= boot_timeout=90

#Avoid spaces within parameters, they aren't worth the heartache diff --git a/config/boards/bench/juno-a57.json b/config/boards/bench/juno-a57.json deleted file mode 100644 index 937dd10..0000000 --- a/config/boards/bench/juno-a57.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "job_name": "", - "device_type": "juno", - "tags": [ "serial-console-server" ], - "timeout": 691200, - "actions": [ - { - "command": "deploy_linaro_image", - "parameters": { - "hwpack": "http://people.linaro.org/~bernie.ogden/hwpack_linaro-lt [...] - "rootfs": "http://people.linaro.org/~bernie.ogden/linaro-utopic-de [...] - } - }, - { - "command": "lava_test_shell", - "parameters": { - "testdef_repos": [ - { - "git-repo": "git://git.linaro.org/toolchain/lavabench.git", - "testdef": "bench-session-debian.yaml", - "parameters": { - "GATEWAY": "10.0.0.1", - "PUB_KEY": "", - "LISTENER_ADDR": "", - "LISTENER_PORT": "" - } - } - ], - "timeout": 691200 - } - }, - { - "command": "submit_results", - "parameters": { - "server": "", - "stream": "" - } - } - ] -} - diff --git a/config/boards/bench/kvm.conf b/config/boards/bench/kvm.conf index 96f6337..7c00803 100644 --- a/config/boards/bench/kvm.conf +++ b/config/boards/bench/kvm.conf @@ -7,7 +7,7 @@ netctl=no freq= benchcore= othercore= -ip=kvm.json +ip= boot_timeout=60

#Avoid spaces within parameters, they aren't worth the heartache diff --git a/config/boards/bench/kvm.json b/config/boards/bench/kvm.json deleted file mode 100644 index 39e9170..0000000 --- a/config/boards/bench/kvm.json +++ /dev/null @@ -1,39 +0,0 @@ -{ - "job_name": "", - "device_type": "kvm", - "timeout": 1800, - "actions": [ - { - "command": "deploy_linaro_image", - "parameters": { - "image": "http://images.validation.linaro.org/ubuntu-14-04-server- [...] - } - }, - { - "command": "lava_test_shell", - "parameters": { - "testdef_repos": [ - { - "git-repo": "git://git.linaro.org/toolchain/lavabench.git", - "testdef": "bench-session-debian.yaml", - "parameters": { - "GATEWAY": "10.0.0.1", - "PUB_KEY": "", - "LISTENER_ADDR": "", - "LISTENER_PORT": "" - } - } - ], - "timeout": 691200 - } - }, - { - "command": "submit_results", - "parameters": { - "server": "", - "stream": "" - } - } - ] -} - diff --git a/config/boards/bench/panda-es.conf b/config/boards/bench/panda-es.conf index 73580d5..ffe26a9 100644 --- a/config/boards/bench/panda-es.conf +++ b/config/boards/bench/panda-es.conf @@ -3,8 +3,7 @@ netctl=yes freq= benchcore=0 othercore=1 -ip=panda-es.json -#ip=linaro@10.2.201.83 +ip= boot_timeout=90

#Avoid spaces within parameters, they aren't worth the heartache diff --git a/config/boards/bench/panda-es.json b/config/boards/bench/panda-es.json deleted file mode 100644 index 602ebb9..0000000 --- a/config/boards/bench/panda-es.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "job_name": "", - "device_type": "panda-es", - "timeout": 691200, - "actions": [ - { - "command": "deploy_linaro_image", - "parameters": { - "hwpack": "http://releases.linaro.org/14.05/ubuntu/panda/hwpack_linaro- [...] - "rootfs": "http://releases.linaro.org/14.05/ubuntu/panda/linaro-trusty- [...] - } - }, - { - "command": "lava_test_shell", - "parameters": { - "testdef_repos": [ - { - "git-repo": "http://git.linaro.org/toolchain/lavabench.git", - "testdef": "bench-session-debian.yaml", - "parameters": { - "GATEWAY": "10.0.0.1", - "PUB_KEY": "", - "LISTENER_ADDR": "", - "LISTENER_PORT": "" - } - } - ], - "timeout": 691200 - } - }, - { - "command": "submit_results", - "parameters": - { - "server": "", - "stream": "" - } - } - - ] -} diff --git a/scripts/benchmark.sh b/scripts/benchmark.sh index d09703a..6b10b70 100755 --- a/scripts/benchmark.sh +++ b/scripts/benchmark.sh @@ -10,7 +10,6 @@ set -o pipefail set -o nounset

#Make sure that subscripts clean up - we must not leave benchmark sources or data [...] -#we should not leave lava targets reserved trap clean_top EXIT trap 'error=1; exit' TERM INT HUP QUIT

@@ -48,12 +47,11 @@ $0 [-tckh] -b <benchmark> <board...> be treated as an error, even if recoverable. On by default. -h Show this help. -k Keep. If this is set, benchmark sources and results will be left on - target. LAVA targets will not be released. + target.

<board...> may be anything that has a file in config/boards/bench, e.g. the existence of arndale.conf means that you can put arndale here. At least one - target may be specified. ssh targets must only be specified once. LAVA - targets can be specified as many times as you like. + target may be specified. Each target must only be specified once.

If building natively, board is optional. If not given, the benchmark will run on localhost. @@ -129,9 +127,7 @@ while getopts g:f:a:i:b:kpchs flag; do esac done shift $((OPTIND - 1)) -devices=("$@") #Duplicate targets are fine for lava, they will resolve to differen [...] - #Duplicate targets not fine for ssh access, where they will just re [...] - #TODO: Check for multiple instances of a given non-lava target +devices=("$@")

if test x"${benchmark:-}" = x; then echo "No benchmark given (-b)" 1>&2 diff --git a/scripts/benchutil.sh b/scripts/benchutil.sh index 66a6c6d..94cf75a 100644 --- a/scripts/benchutil.sh +++ b/scripts/benchutil.sh @@ -31,57 +31,6 @@ function get_addr echo "${listener_addr}" | sed 's/^[[:blank:]]*//' | sed 's/[[:blank:]]*$//' }

-#Return 0 if we're inside the lava network -#Return 1 if we're outside the lava network -#Return 2 if we don't know where we are -#Typically, 2 will be returned if we can't ssh into the hackbox. This tends -#to mean we're not configured to do so and could happen both inside and outside -#the LAVA network. -function lava_network -{ - local hackbox_mac - - hackbox_mac="`ssh -F /dev/null -o PasswordAuthentication=no -o PubkeyAuthenticat [...] - if test $? -ne 0; then - echo "Failed to get hackbox mac" 1>&2 - echo "Tried: ssh -F /dev/null -o PasswordAuthentication=no -o PubkeyAuthentica [...] - return 2 #We couldn't get the mac, stop trying to figure out where we are - fi - /usr/sbin/arp 10.0.0.10 | grep -q "${hackbox_mac}"; - if test $? -eq 0; then - return 0 - else - return 1 - fi -} - -function lava_user -{ - local usr="${USER}" - if echo "$1" | grep -q '^http'; then - echo "LAVA URL must exclude protocol (e.g. http://, https://)" 1>&2 - return 1 - fi - if echo "$1" | grep -Eq '^.+@'; then - usr="${1/@*}" - usr="${usr/:*}" - fi - echo "${usr}" -} - -function lava_server -{ - if echo "$1" | grep -q '^http'; then - echo "LAVA URL must exclude protocol (e.g. http://, https://)" 1>&2 - return 1 - fi - if echo "$1" | grep -Eq '^.+@'; then - echo "$1" | sed 's/[^@]*@//' - else - echo "$1" - fi -} - #Attempt to use read to discover whether there is a record to read from the producer #If we time out, check to see whether the producer still seems to be alive. #We can check more than one pid, if we have visibility of some other process(s) that we diff --git a/scripts/lava.sh b/scripts/lava.sh deleted file mode 100755 index 8bdc639..0000000 --- a/scripts/lava.sh +++ /dev/null @@ -1,356 +0,0 @@ -#!/bin/bash - -#Deps: lava-tool, auth token for lava-tool -set -o pipefail -set -o nounset -# load the configure file produced by configure -if test -e "${PWD}/host.conf"; then - . "${PWD}/host.conf" -else - echo "ERROR: no host.conf file! Did you run configure?" 1>&2 - exit 1 -fi -topdir="${abe_path}" #abe global, but this should be the right value for abe -. "${topdir}"/scripts/benchutil.sh -if test $? -ne 0; then - echo "Unable to source ${topdir}/benchutil.sh" 1>&2 - exit 1 -fi -listener_pid= -waiter= -keep=1 -error=1 -trap 'keep=0; exit ${error}' USR1 -trap release EXIT -trap 'exit ${error}' TERM INT HUP QUIT - -function retrying_lava_tool -{ - local c - for c in {4..0}; do - lava-tool "$@" && return 0 - if test $c -eq 0; then - return 1 - else - echo "lava-tool $@ failed" 1>&2 - echo "May be spurious: ${c} retries remaining" 1>&2 - sleep 5 - fi - done - return 1 -} - -function job_status -{ - if test x"${id:-}" = x -o x"${lava_url:-}" = x; then - echo "Job ID or LAVA URL not defined" 1>&2 - return 1 - fi - - local jobstatus - jobstatus="`retrying_lava_tool job-status https://%24%7Blava_url%7D ${id}`" - if test $? -ne 0; then - echo "Job ${id} disappeared!" 1>&2 - return 1 - fi - echo "${jobstatus}" | grep "Job Status: $1" > /dev/null - if test $? -ne 0; then - echo "Job ${id} has surprising status" 1>&2 - echo -e "${jobstatus}" 1>&2 - return 1 - fi - - return 0 -} - -release() -{ - if test x"${waiter:-}" != x; then - kill "${waiter}" 2>/dev/null - wait "${waiter}" - fi - if test x"${listener_pid:-}" != x; then - kill "${listener_pid}" 2>/dev/null - wait "${listener_pid}" - fi - if test x"${temps:-}" != x; then - if test -d "${temps}"; then - exec {listener_handle}>&- - exec {listener_handle}<&- - rm -rf "${temps}" - if test $? -ne 0; then - echo "Failed to delete temporary file store ${temps}" 1>&2 - fi - fi - fi - if test x"${id:-}" != x; then - if test ${keep} -eq 0; then - retrying_lava_tool cancel-job https://%22%24%7Blava_url%7D" "${id}" - if test $? -eq 0; then - echo "Cancelled job ${id}" - error=0 - else - echo "Failed to cancel job ${id}" 1>&2 - echo "Run 'lava-tool cancel-job https://%22%24%7Blava_url%7D" "${id}"' to cancel" 1>&2 - error=1 - fi - else - echo "Did not cancel job ${id} - superior did not request cancellation." - echo "You probably have some cleanup to do." - echo "When you've finished, cancel by running:" - echo "lava-tool cancel-job https://%24%7Blava_url%7D ${id}" - error=0 - fi - echo "Getting present job status:" - retrying_lava_tool job-status "https://%24%7Blava_url%7D" "${id}" - if test $? -ne 0; then - echo "Was unable to get job status" - fi - lava_url=${lava_url%/RPC2/} - echo "Log should be at: https://%24%7Blava_url#*@%7D/scheduler/job/%24%7Bid%7D/log_file#bottom" - fi - exit "${error}" -} - -lava_url="${LAVA_SERVER:-}" -lava_server= -lava_user= -lava_json= -lava_job_name="tcwg-benchmark" -boot_timeout="$((120*60))" #2 hours -key=${LAVA_SSH_KEYFILE:-} -while getopts s:j:b:p:g: flag; do - case "${flag}" in - g) lava_job_name="${OPTARG}";; - s) lava_url="${OPTARG}";; - j) lava_json="${OPTARG}";; - b) boot_timeout="$((OPTARG*60))";; - p) key="${OPTARG}";; - *) - echo 'Unknown option' 1>&2 - exit 1 - ;; - esac -done - -expr ${lava_url:?'Must give a LAVA URL (-s) or set $LAVA_SERVER'} > /dev/null -lava_user="`lava_user ${lava_url}`" -if test $? -ne 0; then - echo "Unable to find username from ${lavaserver}" 1>&2 - exit 1 -fi -lava_server="`lava_server ${lava_url}`" -if test $? -ne 0; then - echo "Unable to find username from ${lavaserver}" 1>&2 - exit 1 -fi - -if ! test -f ${lava_json:?'Must give a json file (-j)'}; then - echo "JSON file ${lava_json} not a file" - exit 1 -fi - -shift $((OPTIND - 1)) -if test ${#@} -ne 0; then - echo -n "Unknown option(s): " 1>&2 - for opt in "$@"; do - echo -n " '${opt}'" 1>&2 - done - echo 1>&2 - exit 1 -fi - -#Store the public key in key - if no public key file given on CLI, try a few -#sensible defaults. (We only ever end up sharing a public key, so there's no -#security issue here.) -if test x"${key:-}" = x; then - if ssh-add -l; then - key="`ssh-add -L | head -n1 2>/dev/null`" - if test $? -ne 0; then - echo "Failed to get public key from ssh-agent" 1>&2 - exit 1 - fi - elif test -f ~/.ssh/id_rsa; then - key="`ssh-keygen -y -f ~/.ssh/id_rsa`" - if test $? -ne 0; then - echo "Failed to get public key from private key file" 1>&2 - exit 1 - fi - else - echo "Could not find a key to authenticate with target (tried ssh-agent, ~/.ss [...] - exit 1 - fi -else - if test -f "${key}"; then - #Build in a little protection against accidental private key publication - if head -n 1 "${key}" | grep PRIVATE > /dev/null; then - echo "Given key file appears to be a private key, will generate public key" 1>&2 - key="`ssh-keygen -y -f ${key}`" - if test $? -ne 0; then - echo "Failed to get public key from private key file" 1>&2 - exit 1 - fi - elif head -n 1 "${key}" | grep -v ^ssh-; then - echo "Given key file does not look like an ssh public key" 1>&2 - exit 1 - else - key="`cat ${key}`" - fi - else - echo "Public key file ${key} does not exist or is not a file" 1>&2 - exit 1 - fi -fi - -#Convert key into a sed-friendly replacement string (i.e. escape chars that are sp [...] -#Danger - Don't change the sed runes to backticks, they resolve differently and re [...] -key="$(set -f; echo ${key} | sed 's/[/&]/\&/g')" - -temps="`mktemp -dt XXXXXXXXX`" || exit 1 -listener_fifo="${temps}/listener_fifo" -mkfifo "${listener_fifo}" || exit 1 -exec {listener_handle}<>"${listener_fifo}" -json_copy="${temps}/job.json" -cp "${lava_json}" "${json_copy}" -sed -i "s/^(.*"PUB_KEY":)[^"]*".*"[^,]*(,?)[[:blank:]]*$/\1 "${key}"\2 [...] -if test $? -ne 0; then - echo "Failed to populate json file with public key" 1>&2 - exit 1 -fi -sed -i "s+^(.*"job_name":)[^"]*".*"[^,]*(,?)[[:blank:]]*$+\1 "${lava_j [...] -sed -i "s+^(.*"server":)[^"]*".*"[^,]*(,?)[[:blank:]]*$+\1 "https://%24%7B [...] -sed -i "s+^(.*"stream":)[^"]*".*"[^,]*(,?)[[:blank:]]*$+\1 "/private/p [...] - -if test -z "${LAVA_IN_LAB}"; then - lava_network "${lava_user}" - in_lab=$? -else - in_lab=0 -fi -if test ${in_lab} -eq 2; then - echo "Unable to determine whether I am inside the LAVA lab, assuming that I am n [...] -fi - -listener_addr="`get_addr`" -if test $? -ne 0; then - echo "Unable to get IP for listener" 1>&2 - exit 1 -fi -if test ${in_lab} -eq 0; then - "${topdir}"/scripts/establish_listener.sh ${listener_addr} 4200 5200 >&"${listen [...] -else - "${topdir}"/scripts/establish_listener.sh -f 10.0.0.10:${lava_user}@lab.validati [...] -fi -listener_pid=$! -listener_addr="`bgread -T 60 ${listener_pid} <&${listener_handle}`" -if test $? -ne 0; then - echo "Failed to read listener address" 1>&2 - exit 1 -fi -listener_port="`bgread -T 60 ${listener_pid} <&${listener_handle}`" -if test $? -ne 0; then - echo "Failed to read listener port" 1>&2 - exit 1 -fi -echo "Listener ${listener_addr}:${listener_port}" - -sed -i "s/^(.*"LISTENER_ADDR":)[^"]*".*"[^,]*(,?)[[:blank:]]*$/\1 "${li [...] -if test $? -ne 0; then - echo "Failed to populate json file with listener ip" 1>&2 - exit 1 -fi -sed -i "s/^(.*"LISTENER_PORT":)[^"]*".*"[^,]*(,?)[[:blank:]]*$/\1 "${li [...] -if test $? -ne 0; then - echo "Failed to populate json file with listener port" 1>&2 - exit 1 -fi - -id="`retrying_lava_tool submit-job https://%24%7Blava_url%7D ${json_copy}`" -if test $? -ne 0; then - echo "Failed to submit job" 1>&2 - echo "URL: https://%24%7Blava_url%7D" 1>&2 - echo "JSON: " 1>&2 - cat "${json_copy}" 1>&2 - exit 1 -fi - -#TODO: Should be able to use cut at the end of this pipe, but when lava-tool -# is invoked through expect wrapper this line ends up with a carriage return -# at the end. Should be fixed on the expect side, or expect script should -# be discarded, but hack it here for now. -id="`echo ${id} | grep 'submitted as job id: [[:digit:]]+' | grep -o '[[:digit:]]+'`" -if test $? -ne 0; then - echo "Failed to read job id" 1>&2 - echo "Input string was: ${id}" 1>&2 - echo "JSON: " 1>&2 - cat "${json_copy}" 1>&2 - exit 1 -fi -echo "Dispatched LAVA job ${id}" - -sleep 15& #A short delay here is handy when debugging (if the LAVA queues are empt [...] -wait $! - -#Monitor job status until it starts running or fails -#TODO: This block assumes that lava_tool doesn't return until the job is in 'Submi [...] -#TODO: In principle we want a timeout here, but we could be queued for a very long [...] -while true; do - jobstatus="`retrying_lava_tool job-status https://%24%7Blava_url%7D ${id}`" - if test $? -ne 0; then - echo "Job ${id} disappeared!" 1>&2 - exit 1 - fi - echo "${jobstatus}" | grep 'Job Status: Running' > /dev/null - if test $? -eq 0; then - break - fi - echo "${jobstatus}" | grep 'Job Status: Submitted' > /dev/null - if test $? -ne 0; then - echo "Job ${id} has surprising status, giving up" 1>&2 - echo -e "${jobstatus}" 1>&2 - exit 1 - fi - sleep 60& - wait $! -done - -echo "Job ${id} is running, waiting for boot" - -deadline=$((`date +%s` + boot_timeout)) -while test `date +%s` -lt ${deadline}; do - read -t 60 user_ip <&"${listener_handle}" - err=$? - if test ${err} -eq 0; then - break - elif test ${err} -le 128; then - echo "Non-timeout error code ${err} while trying to read user_ip" 1>&2 - exit 1 - fi - if ! job_status 'Running'; then - echo "Bad status, giving up" 1>&2 - exit 1 - fi -done - -#We've finished with the listener -kill ${listener_pid} 2>/dev/null -#Don't wait on it - that way, when we kill and wait on exit, we know we're -#still dealing with the same process. (Killing it more than once is harmless.) - -if test x"${user_ip:-}" = x; then - echo "LAVA boot abandoned after $((boot_timeout/60)) minutes" 1>&2 - exit 1 -fi - -echo "LAVA target ready at ${user_ip}" - -#Wait to be killed, at which point we cancel the job -while true; do - sleep 600 & - waiter=$! - wait ${waiter} - if ! job_status Running; then - echo "Job ${id} has bad status, giving up" 1>&2 - exit 1 - fi -done diff --git a/scripts/runbenchmark.sh b/scripts/runbenchmark.sh index e966952..6e3c487 100755 --- a/scripts/runbenchmark.sh +++ b/scripts/runbenchmark.sh @@ -1,8 +1,6 @@ #!/bin/bash #This script takes a build of a benchmark and transfers it to, and runs it on -#a single target. The target may be LAVA or non-LAVA. The script is mostly -#LAVA-agnostic - apart from the section that initiates the LAVA session, there -#is some awareness of it in the exit handler, and that's all. +#a single target. set -o pipefail set -o nounset

@@ -11,14 +9,12 @@ trap 'exit ${error}' TERM INT HUP QUIT

tag= session_pid= -lava_pid= listener_pid= benchmark= device= keep= cautious='' build_dir= -lava_target= run_benchargs= while getopts g:b:d:t:a:kpc flag; do case "${flag}" in @@ -54,13 +50,6 @@ else fi topdir="${abe_path}" #abe global, but this should be the right value for abe confdir="${topdir}/config/boards/bench" -if test x"${LAVA_SERVER:-}" != x; then - lava_url="${LAVA_SERVER}" -else - lava_url="${USER}@validation.linaro.org/RPC2/" - echo "Environment variable LAVA_SERVER not set, defaulted to ${lava_url}" 1>&2 -fi - benchlog="`. ${abe_top}/host.conf && . ${topdir}/lib/common.sh && read_config ${be [...] if test $? -ne 0; then echo "Unable to read benchmark config file for ${benchmark}" 1>&2 @@ -86,14 +75,10 @@ fi temps="`mktemp -dt XXXXXXXXX`" || exit 1 listener_file="${temps}/listener_file" listener_fifo="${temps}/listener_fifo" -lava_fifo="${temps}/lava_fifo" mkfifo "${listener_fifo}" || exit 1 exec {listener_handle}<>${listener_fifo} -mkfifo "${lava_fifo}" || exit 1 -exec {lava_handle}<>"${lava_fifo}"

#Make sure that subscripts clean up - we must not leave benchmark sources or data [...] -#we should not leave lava targets reserved clean_benchmark() { error=$? @@ -131,26 +116,9 @@ clean_benchmark() wait "${listener_pid}" fi

- if test x"${lava_pid:-}" != x; then - if (test x"${keep}" = x && test ${error} -ne 0) || test x"${keep}" = 'x-k'; then - echo "Not killing lava session, to ensure session remains open for investiga [...] - kill "${lava_pid}" 2>/dev/null - wait "${lava_pid}" - else - kill -USR1 "${lava_pid}" 2>/dev/null - wait "${lava_pid}" - fi - - #Make sure we see any messages from the lava.sh handlers - dd iflag=nonblock <&${lava_handle} 2>/dev/null | awk "{print "${lava_target}: [...] - fi - - #Delete these last so that we can still get messages through the lava fifo if test -d "${temps}"; then exec {listener_handle}>&- exec {listener_handle}<&- - exec {lava_handle}>&- - exec {lava_handle}<&- rm -rf "${temps}" if test $? -ne 0; then echo "Failed to delete ${temps}" 1>&2 @@ -161,66 +129,9 @@ clean_benchmark() exit "${error}" }

-ssh_opts="-F /dev/null ${LAVA_SSH_KEYFILE:+-o IdentityFile=${LAVA_SSH_KEYFILE}}" +ssh_opts="-F /dev/null" establish_listener_opts=

-#Handle LAVA case -echo "${ip}" | grep '.json$' > /dev/null -if test $? -eq 0; then - lava_user="`lava_user ${lava_url}`" - if test $? -ne 0; then - echo "Unable to find username from ${lava_url}" 1>&2 - exit 1 - fi - if test -z "${LAVA_IN_LAB}"; then - lava_network "${lava_user}" - case $? in - 2) echo "Unable to determing location w.r.t. lava lab: assuming outside" 1>&2 ;; - 1) - gateway=lab.validation.linaro.org - ssh_opts="${ssh_opts} ProxyCommand='ssh ${lava_user}@${gateway} nc -q0 %h %p'" - establish_listener_opts="-f 10.0.0.10:${lava_user}@${gateway}" - esac - fi - lava_target="${ip}" - ip='' - tee_output=/dev/console - echo "Acquiring LAVA target ${lava_target}" - echo "${topdir}/scripts/lava.sh ${tag:+-g "${tag}"} -s ${lava_url} -j ${confdir} [...] - - ${topdir}/scripts/lava.sh ${tag:+-g "${tag}"} -s "${lava_url}" -j "${confdir}/${ [...] - if test $? -ne 0; then - echo "+++ Failed to acquire LAVA target ${lava_target}" 1>&2 - exit 1 - fi - lava_pid=$! - while true; do - line="`bgread -t 5 ${lava_pid} <&${lava_handle}`" - if test $? -ne 0; then - echo "${lava_target}: Failed to read lava output" 1>&2 - exit 1 - fi - echo "${lava_target}: $line" - if echo "${line}" | grep '^LAVA target ready at ' > /dev/null; then - ip="`echo ${line} | cut -d ' ' -f 5 | sed 's/\s*$//'`" - break - fi - done - #After this point, lava.sh should produce no output until we reach the exit handlers. - #Our exit handler checks the pipe from lava.sh before closing down. - - if test x"${ip:-}" = x; then - echo "+++ Failed to acquire LAVA target ${lava_target}" 1>&2 - exit 1 - fi -fi - -if test -z "${gateway:-}"; then - gateway="${ip/*@}" -fi -#LAVA-agnostic from here, apart from a section in the exit handler, and bgread -#monitoring of the LAVA process while we're waiting for the benchmark to end - #Set up our listener listener_addr="`get_addr`" if test $? -ne 0; then @@ -354,16 +265,10 @@ fi )& session_pid=$!

-#lava_pid will expand to empty if we're not using lava -#lava_pid will expand to empty if we're not using lava #No sense in setting a deadline on this one, it's order of days for many cases -ip="`bgread ${listener_pid} ${lava_pid} <&${listener_handle}`" +ip="`bgread ${listener_pid} <&${listener_handle}`" if test $? -ne 0; then - if test x"${lava_pid:-}" = x; then - echo "Failed to read post-benchmark-run IP" 1>&2 - else - echo "LAVA process died, or otherwise failed while waiting to read post-benchm [...] - fi + echo "Failed to read post-benchmark-run IP" 1>&2 exit 1 fi