lng-ci

lng-ci@lists.linaro.org

2075 discussions

Build failed in Jenkins: ODP API check » x86-64,docker-jessie-amd64,all #951

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je… [...truncated 4849 lines...] make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[5]: Nothing to be done for 'check-am'. make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in linux-generic make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in performance make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make check-TESTS make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> PASS: odp_scheduling_run_proc.sh make[6]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[6]: Nothing to be done for 'all'. make[6]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> ============================================================================ Testsuite summary for OpenDataPlane 1.12.0.0 ============================================================================ # TOTAL: 1 # PASS: 1 # SKIP: 0 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in validation/api/pktio make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make pktio_env pktio_run.sh pktio_run_tap.sh pktio_run_pcap.sh pktio_run_netmap.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_env'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_tap.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_pcap.sh'. make[4]: Nothing to be done for '../../../../../../test/linux-generic/validation/api/pktio/pktio_run_netmap.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in validation/api/shmem make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in mmap_vlan_ins make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make vlan.pcap mmap_vlan_ins.sh pktio_env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/vlan.pcap'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/mmap_vlan_ins.sh'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/pktio_env'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in pktio_ipc make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make pktio_ipc_run.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../test/linux-generic/pktio_ipc/pktio_ipc_run.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in ring make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in mmap_vlan_ins make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make vlan.pcap mmap_vlan_ins.sh pktio_env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/vlan.pcap'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/mmap_vlan_ins.sh'. make[4]: Nothing to be done for '../../../../test/linux-generic/mmap_vlan_ins/pktio_env'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making check in pktio_ipc make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make pktio_ipc_run.sh make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../../test/linux-generic/pktio_ipc/pktio_ipc_run.sh'. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[3]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make run-test tests-validation.env make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[4]: Nothing to be done for '../../../test/linux-generic/run-test'. make[4]: 'tests-validation.env' is up to date. make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make check-TESTS make[4]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[5]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> PASS: validation/api/pktio/pktio_run.sh SKIP: validation/api/pktio/pktio_run_tap.sh PASS: validation/api/shmem/shmem_linux PASS: ../../test/common_plat/validation/api/atomic/atomic_main PASS: ../../test/common_plat/validation/api/barrier/barrier_main PASS: ../../test/common_plat/validation/api/buffer/buffer_main PASS: ../../test/common_plat/validation/api/classification/classification_main PASS: ../../test/common_plat/validation/api/cpumask/cpumask_main PASS: ../../test/common_plat/validation/api/crypto/crypto_main PASS: ../../test/common_plat/validation/api/errno/errno_main PASS: ../../test/common_plat/validation/api/hash/hash_main PASS: ../../test/common_plat/validation/api/init/init_main_ok PASS: ../../test/common_plat/validation/api/init/init_main_abort PASS: ../../test/common_plat/validation/api/init/init_main_log PASS: ../../test/common_plat/validation/api/lock/lock_main PASS: ../../test/common_plat/validation/api/packet/packet_main PASS: ../../test/common_plat/validation/api/pool/pool_main PASS: ../../test/common_plat/validation/api/queue/queue_main PASS: ../../test/common_plat/validation/api/random/random_main PASS: ../../test/common_plat/validation/api/scheduler/scheduler_main PASS: ../../test/common_plat/validation/api/std_clib/std_clib_main PASS: ../../test/common_plat/validation/api/thread/thread_main PASS: ../../test/common_plat/validation/api/time/time_main PASS: ../../test/common_plat/validation/api/timer/timer_main PASS: ../../test/common_plat/validation/api/traffic_mngr/traffic_mngr_main PASS: ../../test/common_plat/validation/api/shmem/shmem_main PASS: ../../test/common_plat/validation/api/system/system_main PASS: ring/ring_main PASS: validation/api/pktio/pktio_run_pcap.sh SKIP: mmap_vlan_ins/mmap_vlan_ins.sh SKIP: validation/api/pktio/pktio_run_netmap.sh FAIL: pktio_ipc/pktio_ipc_run.sh make[6]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in performance make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in validation/api/pktio make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in validation/api/shmem make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in mmap_vlan_ins make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in pktio_ipc make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in ring make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in mmap_vlan_ins make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Making all in pktio_ipc make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[7]: Nothing to be done for 'all-am'. make[7]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> make[6]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> ============================================================================ Testsuite summary for OpenDataPlane 1.12.0.0 ============================================================================ # TOTAL: 32 # PASS: 28 # SKIP: 3 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See test/linux-generic/test-suite.log Please report to lng-odp(a)lists.linaro.org ============================================================================ Makefile:838: recipe for target 'test-suite.log' failed make[5]: *** [test-suite.log] Error 1 make[5]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:944: recipe for target 'check-TESTS' failed make[4]: *** [check-TESTS] Error 2 make[4]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:1217: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:731: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:419: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:477: recipe for target 'check-recursive' failed make: *** [check-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + mkdir -p out/log + find check-odp/build/odp/testdir/ -type f -name '*.log' -exec cp '{}' out/log ';' + case "${ARCH}" in + case "${label}" in + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 11:55:09-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 46.137.111.246 Connecting to git.linaro.org (git.linaro.org)|46.137.111.246|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 11:55:09-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 63.5M=0s 2016-12-20 11:55:09 (63.5 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + PUB_DEST=components/lng/odp/odp-api-check/master/docker-jessie-amd64//all/951 + python /home/buildslave/bin/linaro-cp.py --api_version 3 --link-latest out components/lng/odp/odp-api-check/master/docker-jessie-amd64//all/951 real 0m17.288s user 0m0.896s sys 0m0.132s + echo '***************************' *************************** + echo 'Logs published on http://snapshots.linaro.org/components/lng/odp/odp-api-check/master/docker-…' Logs published on http://snapshots.linaro.org/components/lng/odp/odp-api-check/master/docker-… + echo '***************************' *************************** + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Jenkins build is back to normal : ODP API check » armeb,docker-jessie-amd64,all #956

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=armeb,label=docker-jes…

8 years, 5 months

Build failed in Jenkins: ODP API check » x86-64,docker-jessie-amd64,netmap #952

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je… [...truncated 1305 lines...] checking openssl/des.h presence... yes checking for openssl/des.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... yes checking net/netmap_user.h usability... yes checking net/netmap_user.h presence... yes checking for net/netmap_user.h... yes checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/odp/api/spec/version.h config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/static_inline.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/mmap_vlan_ins/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating doc/driver-api-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.12.0.0 ODP Library version: 112:0:0 Helper Library version: 110:1:1 implementation_name: odp-linux ARCH_DIR x86 with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: x86 cc: gcc cc version: 4.9.2 cppflags: am_cppflags: -isystem <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…> am_cxxflags: -std=c++11 cflags: -g -O2 am_cflags: -pthread -DHAVE_PCAP -DODP_NETMAP -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: am_ldflags: -pthread -lrt libs: -lrt -lcunit -lcrypto -lpcap defs: -DHAVE_CONFIG_H static libraries: yes shared libraries: yes ABI compatible: yes cunit: yes test_vald: yes test_perf: yes test_perf_proc: yes test_cpp: no test_helper: yes test_example: yes user_guides: no + isdebug echo 'helper/generic: exiting function: do_configure()' + '[' 0 -eq 1 ']' + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + git log -1 --oneline + [[ -n '' ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + isdebug echo 'build: before make -j 8' + '[' 0 -eq 1 ']' + exit_on_error make -j 8 + quiet make -j 8 + [[ 0 -eq 1 ]] + make -j 8 Making all in platform/linux-generic make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> CC _fdserver.lo CC _ishm.lo CC _ishmphy.lo CC odp_atomic.lo CC odp_barrier.lo CC odp_byteorder.lo CC odp_buffer.lo CC odp_classification.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo CC odp_packet_flags.lo CC odp_packet_io.lo CC odp_pkt_queue.lo CC odp_pool.lo CC odp_queue.lo CC odp_rwlock.lo odp_packet.c: In function 'odp_packet_trunc_head': odp_packet.c:314:46: error: array subscript is above array bounds [-Werror=array-bounds] to->buf_hdr.seg[i].len = from->buf_hdr.seg[num + i].len; ^ CC odp_rwlock_recursive.lo CC odp_schedule.lo CC odp_schedule_if.lo CC odp_schedule_sp.lo CC odp_shared_memory.lo CC odp_sorted_list.lo CC odp_spinlock.lo cc1: all warnings being treated as errors Makefile:871: recipe for target 'odp_packet.lo' failed make[1]: *** [odp_packet.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:479: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + case "${ARCH}" in + case "${label}" in + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 15:06:57-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 46.137.111.246 Connecting to git.linaro.org (git.linaro.org)|46.137.111.246|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 15:06:58-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 56.5M=0s 2016-12-20 15:06:58 (56.5 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Build failed in Jenkins: ODP API check » x86-64,docker-jessie-amd64,ipc #952

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je… [...truncated 1290 lines...] checking for PTHREAD_PRIO_INHERIT... yes checking for EVP_EncryptInit in -lcrypto... yes checking openssl/des.h usability... yes checking openssl/des.h presence... yes checking for openssl/des.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... yes checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/odp/api/spec/version.h config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/static_inline.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/mmap_vlan_ins/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating doc/driver-api-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.12.0.0 ODP Library version: 112:0:0 Helper Library version: 110:1:1 implementation_name: odp-linux ARCH_DIR x86 with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: x86 cc: gcc cc version: 4.9.2 cppflags: am_cppflags: am_cxxflags: -std=c++11 cflags: -g -O2 am_cflags: -pthread -DHAVE_PCAP -D_ODP_PKTIO_IPC -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: am_ldflags: -pthread -lrt libs: -lrt -lcunit -lcrypto -lpcap defs: -DHAVE_CONFIG_H static libraries: yes shared libraries: yes ABI compatible: yes cunit: yes test_vald: yes test_perf: yes test_perf_proc: yes test_cpp: no test_helper: yes test_example: yes user_guides: no + isdebug echo 'helper/generic: exiting function: do_configure()' + '[' 0 -eq 1 ']' + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + git log -1 --oneline + [[ -n '' ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + isdebug echo 'build: before make -j 8' + '[' 0 -eq 1 ']' + exit_on_error make -j 8 + quiet make -j 8 + [[ 0 -eq 1 ]] + make -j 8 Making all in platform/linux-generic make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> CC _fdserver.lo CC _ishm.lo CC odp_atomic.lo CC _ishmphy.lo CC odp_barrier.lo CC odp_classification.lo CC odp_byteorder.lo CC odp_buffer.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo CC odp_packet_flags.lo CC odp_packet_io.lo CC odp_pkt_queue.lo CC odp_pool.lo CC odp_queue.lo CC odp_rwlock.lo odp_packet.c: In function 'odp_packet_trunc_head': odp_packet.c:314:46: error: array subscript is above array bounds [-Werror=array-bounds] to->buf_hdr.seg[i].len = from->buf_hdr.seg[num + i].len; ^ CC odp_rwlock_recursive.lo CC odp_schedule.lo CC odp_schedule_if.lo CC odp_schedule_sp.lo CC odp_shared_memory.lo CC odp_sorted_list.lo CC odp_spinlock.lo cc1: all warnings being treated as errors Makefile:871: recipe for target 'odp_packet.lo' failed make[1]: *** [odp_packet.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=x86-64,label=docker-je…'> Makefile:479: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + case "${ARCH}" in + case "${label}" in + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 14:59:58-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 46.137.111.246 Connecting to git.linaro.org (git.linaro.org)|46.137.111.246|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 14:59:58-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 112M=0s 2016-12-20 14:59:59 (112 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Build failed in Jenkins: ODP API check » arm64,docker-jessie-arm64,ipc #952

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes… [...truncated 1096 lines...] checking openssl/des.h usability... yes checking openssl/des.h presence... yes checking for openssl/des.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... yes checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/odp/api/spec/version.h config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/static_inline.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/mmap_vlan_ins/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating doc/driver-api-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.12.0.0 ODP Library version: 112:0:0 Helper Library version: 110:1:1 implementation_name: odp-linux ARCH_DIR arm with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: arm cc: gcc cc version: 4.9.2 cppflags: am_cppflags: am_cxxflags: -std=c++11 cflags: -g -O2 am_cflags: -pthread -DHAVE_PCAP -D_ODP_PKTIO_IPC -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: am_ldflags: -pthread -lrt libs: -lrt -lcunit -lcrypto -lpcap defs: -DHAVE_CONFIG_H static libraries: yes shared libraries: yes ABI compatible: yes cunit: yes test_vald: yes test_perf: yes test_perf_proc: yes test_cpp: no test_helper: yes test_example: yes user_guides: no + isdebug echo 'helper/generic: exiting function: do_configure()' + '[' 0 -eq 1 ']' + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + git log -1 --oneline + [[ -n '' ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + isdebug echo 'build: before make -j 8' + '[' 0 -eq 1 ']' + exit_on_error make -j 8 + quiet make -j 8 + [[ 0 -eq 1 ]] + make -j 8 Making all in platform/linux-generic make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> CC _fdserver.lo CC _ishm.lo CC odp_barrier.lo CC odp_atomic.lo CC _ishmphy.lo CC odp_buffer.lo CC odp_byteorder.lo CC odp_classification.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo CC odp_packet_flags.lo CC odp_packet_io.lo CC odp_pkt_queue.lo CC odp_pool.lo odp_packet.c: In function 'odp_packet_trunc_head': odp_packet.c:314:46: error: array subscript is above array bounds [-Werror=array-bounds] to->buf_hdr.seg[i].len = from->buf_hdr.seg[num + i].len; ^ CC odp_queue.lo CC odp_rwlock.lo CC odp_rwlock_recursive.lo CC odp_schedule.lo CC odp_schedule_if.lo CC odp_schedule_sp.lo CC odp_shared_memory.lo CC odp_sorted_list.lo CC odp_spinlock.lo cc1: all warnings being treated as errors Makefile:871: recipe for target 'odp_packet.lo' failed make[1]: *** [odp_packet.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:479: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + case "${ARCH}" in + case "${label}" in + export ARCH=arm64 + ARCH=arm64 + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 14:42:03-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 23.21.56.198 Connecting to git.linaro.org (git.linaro.org)|23.21.56.198|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 14:42:04-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 14.0M=0.001s 2016-12-20 14:42:05 (14.0 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Build failed in Jenkins: ODP API check » arm64,docker-jessie-arm64,netmap #952

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes… [...truncated 1109 lines...] checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... yes checking net/netmap_user.h usability... yes checking net/netmap_user.h presence... yes checking for net/netmap_user.h... yes checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/odp/api/spec/version.h config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/static_inline.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/mmap_vlan_ins/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating doc/driver-api-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.12.0.0 ODP Library version: 112:0:0 Helper Library version: 110:1:1 implementation_name: odp-linux ARCH_DIR arm with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: arm cc: gcc cc version: 4.9.2 cppflags: am_cppflags: -isystem <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…> am_cxxflags: -std=c++11 cflags: -g -O2 am_cflags: -pthread -DHAVE_PCAP -DODP_NETMAP -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: am_ldflags: -pthread -lrt libs: -lrt -lcunit -lcrypto -lpcap defs: -DHAVE_CONFIG_H static libraries: yes shared libraries: yes ABI compatible: yes cunit: yes test_vald: yes test_perf: yes test_perf_proc: yes test_cpp: no test_helper: yes test_example: yes user_guides: no + isdebug echo 'helper/generic: exiting function: do_configure()' + '[' 0 -eq 1 ']' + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + git log -1 --oneline + [[ -n '' ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + isdebug echo 'build: before make -j 8' + '[' 0 -eq 1 ']' + exit_on_error make -j 8 + quiet make -j 8 + [[ 0 -eq 1 ]] + make -j 8 Making all in platform/linux-generic make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> CC _fdserver.lo CC _ishm.lo CC _ishmphy.lo CC odp_atomic.lo CC odp_barrier.lo CC odp_buffer.lo CC odp_byteorder.lo CC odp_classification.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo CC odp_packet_flags.lo CC odp_packet_io.lo CC odp_pkt_queue.lo CC odp_pool.lo odp_packet.c: In function 'odp_packet_trunc_head': odp_packet.c:314:46: error: array subscript is above array bounds [-Werror=array-bounds] to->buf_hdr.seg[i].len = from->buf_hdr.seg[num + i].len; ^ CC odp_queue.lo CC odp_rwlock.lo CC odp_rwlock_recursive.lo CC odp_schedule.lo CC odp_schedule_if.lo CC odp_schedule_sp.lo CC odp_shared_memory.lo CC odp_sorted_list.lo CC odp_spinlock.lo cc1: all warnings being treated as errors Makefile:871: recipe for target 'odp_packet.lo' failed make[1]: *** [odp_packet.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:479: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + case "${ARCH}" in + case "${label}" in + export ARCH=arm64 + ARCH=arm64 + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 14:40:31-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 23.21.56.198 Connecting to git.linaro.org (git.linaro.org)|23.21.56.198|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 14:40:32-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 22.0M=0s 2016-12-20 14:40:32 (22.0 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Build failed in Jenkins: ODP API check » arm64,docker-jessie-arm64,all #952

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes… [...truncated 1113 lines...] checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... yes checking net/netmap_user.h usability... yes checking net/netmap_user.h presence... yes checking for net/netmap_user.h... yes checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/odp/api/spec/version.h config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/static_inline.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/mmap_vlan_ins/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating doc/driver-api-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.12.0.0 ODP Library version: 112:0:0 Helper Library version: 110:1:1 implementation_name: odp-linux ARCH_DIR arm with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: arm cc: gcc cc version: 4.9.2 cppflags: am_cppflags: -isystem <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…> am_cxxflags: -std=c++11 cflags: -g -O2 am_cflags: -pthread -DHAVE_PCAP -DODP_NETMAP -D_ODP_PKTIO_IPC -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: am_ldflags: -pthread -lrt libs: -lrt -lcunit -lcrypto -lpcap defs: -DHAVE_CONFIG_H static libraries: yes shared libraries: yes ABI compatible: yes cunit: yes test_vald: yes test_perf: yes test_perf_proc: yes test_cpp: no test_helper: yes test_example: yes user_guides: no + isdebug echo 'helper/generic: exiting function: do_configure()' + '[' 0 -eq 1 ']' + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + git log -1 --oneline + [[ -n '' ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + isdebug echo 'build: before make -j 8' + '[' 0 -eq 1 ']' + exit_on_error make -j 8 + quiet make -j 8 + [[ 0 -eq 1 ]] + make -j 8 Making all in platform/linux-generic make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> CC _fdserver.lo CC _ishm.lo CC odp_atomic.lo CC odp_barrier.lo CC _ishmphy.lo CC odp_buffer.lo CC odp_byteorder.lo CC odp_classification.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo CC odp_packet_flags.lo CC odp_packet_io.lo CC odp_pkt_queue.lo CC odp_pool.lo odp_packet.c: In function 'odp_packet_trunc_head': odp_packet.c:314:46: error: array subscript is above array bounds [-Werror=array-bounds] to->buf_hdr.seg[i].len = from->buf_hdr.seg[num + i].len; ^ CC odp_queue.lo CC odp_rwlock.lo CC odp_rwlock_recursive.lo CC odp_schedule.lo CC odp_schedule_if.lo CC odp_schedule_sp.lo CC odp_shared_memory.lo CC odp_sorted_list.lo CC odp_spinlock.lo cc1: all warnings being treated as errors Makefile:871: recipe for target 'odp_packet.lo' failed make[1]: *** [odp_packet.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:479: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + case "${ARCH}" in + case "${label}" in + export ARCH=arm64 + ARCH=arm64 + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 14:40:30-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 23.21.56.198 Connecting to git.linaro.org (git.linaro.org)|23.21.56.198|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 14:40:31-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 17.5M=0.001s 2016-12-20 14:40:32 (17.5 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Build failed in Jenkins: ODP API check » arm64,docker-jessie-arm64,none #952

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes… [...truncated 1092 lines...] checking openssl/des.h usability... yes checking openssl/des.h presence... yes checking for openssl/des.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... yes checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/odp/api/spec/version.h config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/static_inline.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/mmap_vlan_ins/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating doc/driver-api-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.12.0.0 ODP Library version: 112:0:0 Helper Library version: 110:1:1 implementation_name: odp-linux ARCH_DIR arm with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: arm cc: gcc cc version: 4.9.2 cppflags: am_cppflags: am_cxxflags: -std=c++11 cflags: -g -O2 am_cflags: -pthread -DHAVE_PCAP -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: am_ldflags: -pthread -lrt libs: -lrt -lcunit -lcrypto -lpcap defs: -DHAVE_CONFIG_H static libraries: yes shared libraries: yes ABI compatible: yes cunit: yes test_vald: yes test_perf: yes test_perf_proc: yes test_cpp: no test_helper: yes test_example: yes user_guides: no + isdebug echo 'helper/generic: exiting function: do_configure()' + '[' 0 -eq 1 ']' + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + git log -1 --oneline + [[ -n '' ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + isdebug echo 'build: before make -j 8' + '[' 0 -eq 1 ']' + exit_on_error make -j 8 + quiet make -j 8 + [[ 0 -eq 1 ]] + make -j 8 Making all in platform/linux-generic make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> CC _fdserver.lo CC _ishm.lo CC _ishmphy.lo CC odp_atomic.lo CC odp_byteorder.lo CC odp_buffer.lo CC odp_barrier.lo CC odp_classification.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo CC odp_packet_flags.lo CC odp_packet_io.lo CC odp_pkt_queue.lo CC odp_pool.lo odp_packet.c: In function 'odp_packet_trunc_head': odp_packet.c:314:46: error: array subscript is above array bounds [-Werror=array-bounds] to->buf_hdr.seg[i].len = from->buf_hdr.seg[num + i].len; ^ CC odp_queue.lo CC odp_rwlock.lo CC odp_rwlock_recursive.lo CC odp_schedule.lo CC odp_schedule_if.lo CC odp_schedule_sp.lo CC odp_shared_memory.lo CC odp_sorted_list.lo CC odp_spinlock.lo cc1: all warnings being treated as errors Makefile:871: recipe for target 'odp_packet.lo' failed make[1]: *** [odp_packet.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-api-check/ARCH=arm64,label=docker-jes…'> Makefile:479: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + case "${ARCH}" in + case "${label}" in + export ARCH=arm64 + ARCH=arm64 + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 14:40:31-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 23.21.56.198 Connecting to git.linaro.org (git.linaro.org)|23.21.56.198|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 14:40:31-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 21.6M=0s 2016-12-20 14:40:31 (21.6 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + cat + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Build failed in Jenkins: ODP tool check » cpp_test,docker-jessie-amd64 #706

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=cpp_test,label=… [...truncated 1281 lines...] checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for EVP_EncryptInit in -lcrypto... yes checking openssl/des.h usability... yes checking openssl/des.h presence... yes checking for openssl/des.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... yes checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/odp/api/spec/version.h config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/static_inline.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/mmap_vlan_ins/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating doc/driver-api-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.12.0.0 ODP Library version: 112:0:0 Helper Library version: 110:1:1 implementation_name: odp-linux ARCH_DIR x86 with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=cpp_test,label=…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: x86 cc: gcc cc version: 4.9.2 cppflags: am_cppflags: am_cxxflags: -std=c++11 cflags: -g -O2 am_cflags: -pthread -DHAVE_PCAP -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: am_ldflags: -pthread -lrt libs: -lrt -lcunit -lcrypto -lpcap defs: -DHAVE_CONFIG_H static libraries: yes shared libraries: yes ABI compatible: yes cunit: yes test_vald: yes test_perf: yes test_perf_proc: yes test_cpp: yes test_helper: yes test_example: yes user_guides: no + isdebug echo 'helper/generic: exiting function: do_configure()' + '[' 0 -eq 1 ']' + retcode=0 + return 0 + retcode=0 + [[ 0 -ne 0 ]] + return 0 + git log -1 --oneline + [[ -n '' ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + [[ 0 -eq 1 ]] + isdebug echo 'build: before make -j 8' + '[' 0 -eq 1 ']' + exit_on_error make -j 8 + quiet make -j 8 + [[ 0 -eq 1 ]] + make -j 8 Making all in platform/linux-generic make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=cpp_test,label=…'> CC _fdserver.lo CC _ishm.lo CC _ishmphy.lo CC odp_atomic.lo CC odp_barrier.lo CC odp_byteorder.lo CC odp_buffer.lo CC odp_classification.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo CC odp_packet_flags.lo CC odp_packet_io.lo CC odp_pkt_queue.lo CC odp_pool.lo CC odp_queue.lo CC odp_rwlock.lo odp_packet.c: In function 'odp_packet_trunc_head': odp_packet.c:314:46: error: array subscript is above array bounds [-Werror=array-bounds] to->buf_hdr.seg[i].len = from->buf_hdr.seg[num + i].len; ^ CC odp_rwlock_recursive.lo CC odp_schedule.lo CC odp_schedule_if.lo CC odp_schedule_sp.lo CC odp_shared_memory.lo CC odp_sorted_list.lo CC odp_spinlock.lo cc1: all warnings being treated as errors Makefile:871: recipe for target 'odp_packet.lo' failed make[1]: *** [odp_packet.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=cpp_test,label=…'> Makefile:479: recipe for target 'all-recursive' failed make: *** [all-recursive] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 14:47:55-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 46.137.111.246 Connecting to git.linaro.org (git.linaro.org)|46.137.111.246|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 14:47:55-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 36.6M=0s 2016-12-20 14:47:55 (36.6 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Build failed in Jenkins: ODP tool check » distcheck,docker-jessie-amd64 #706

by ci_notify＠linaro.org

https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=distcheck,label… [...truncated 1906 lines...] checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for inline... inline checking for size_t... yes checking for ssize_t... yes checking for uint8_t... yes checking for uint16_t... yes checking for int32_t... yes checking for uint32_t... yes checking for uint64_t... yes checking for C compiler vendor... gnu checking for C compiler version... 4.9.2 checking for valgrind... valgrind checking for Valgrind tool memcheck... memcheck checking for Valgrind tool helgrind... helgrind checking for Valgrind tool drd... drd checking for Valgrind tool exp-sgcheck... exp-sgcheck checking whether gcc supports -fvisibility=hidden... yes checking for GCC atomic builtins... yes checking if compiler needs -Werror to reject unknown flags... no checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... no checking whether pthreads work with -Kthread... no checking whether pthreads work with -kthread... no checking for the pthreads library -llthread... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking for EVP_EncryptInit in -lcrypto... yes checking openssl/des.h usability... yes checking openssl/des.h presence... yes checking for openssl/des.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/hmac.h usability... yes checking openssl/hmac.h presence... yes checking for openssl/hmac.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking pcap/pcap.h usability... yes checking pcap/pcap.h presence... yes checking for pcap/pcap.h... yes checking pcap/bpf.h usability... yes checking pcap/bpf.h presence... yes checking for pcap/bpf.h... yes checking for pcap_open_offline in -lpcap... yes checking for doxygen... doxygen checking for asciidoctor... asciidoctor checking for mscgen... mscgen checking for CU_get_error in -lcunit... yes checking CUnit/Basic.h usability... yes checking CUnit/Basic.h presence... yes checking for CUnit/Basic.h... yes checking for doxygen... /usr/bin/doxygen checking for perl... /usr/bin/perl DX_FLAG_doc=1 DX_FLAG_html=1 checking for library containing timer_create... -lrt checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/odp/api/spec/version.h config.status: creating platform/linux-generic/Makefile config.status: creating platform/linux-generic/include/odp/api/plat/static_inline.h config.status: creating test/linux-generic/Makefile config.status: creating test/linux-generic/validation/api/shmem/Makefile config.status: creating test/linux-generic/validation/api/pktio/Makefile config.status: creating test/linux-generic/mmap_vlan_ins/Makefile config.status: creating test/linux-generic/pktio_ipc/Makefile config.status: creating test/linux-generic/ring/Makefile config.status: creating test/linux-generic/performance/Makefile config.status: creating doc/application-api-guide/Makefile config.status: creating doc/helper-guide/Makefile config.status: creating doc/implementers-guide/Makefile config.status: creating doc/Makefile config.status: creating doc/platform-api-guide/Makefile config.status: creating doc/process-guide/Makefile config.status: creating doc/users-guide/Makefile config.status: creating doc/driver-api-guide/Makefile config.status: creating example/classifier/Makefile config.status: creating example/generator/Makefile config.status: creating example/hello/Makefile config.status: creating example/ipsec/Makefile config.status: creating example/l2fwd_simple/Makefile config.status: creating example/l3fwd/Makefile config.status: creating example/packet/Makefile config.status: creating example/switch/Makefile config.status: creating example/time/Makefile config.status: creating example/timer/Makefile config.status: creating example/traffic_mgmt/Makefile config.status: creating example/Makefile config.status: creating test/common_plat/Makefile config.status: creating test/common_plat/common/Makefile config.status: creating test/common_plat/miscellaneous/Makefile config.status: creating test/common_plat/performance/Makefile config.status: creating test/common_plat/validation/Makefile config.status: creating test/common_plat/validation/api/atomic/Makefile config.status: creating test/common_plat/validation/api/barrier/Makefile config.status: creating test/common_plat/validation/api/buffer/Makefile config.status: creating test/common_plat/validation/api/classification/Makefile config.status: creating test/common_plat/validation/api/cpumask/Makefile config.status: creating test/common_plat/validation/api/crypto/Makefile config.status: creating test/common_plat/validation/api/errno/Makefile config.status: creating test/common_plat/validation/api/hash/Makefile config.status: creating test/common_plat/validation/api/init/Makefile config.status: creating test/common_plat/validation/api/lock/Makefile config.status: creating test/common_plat/validation/api/Makefile config.status: creating test/common_plat/validation/api/packet/Makefile config.status: creating test/common_plat/validation/api/pktio/Makefile config.status: creating test/common_plat/validation/api/pool/Makefile config.status: creating test/common_plat/validation/api/queue/Makefile config.status: creating test/common_plat/validation/api/random/Makefile config.status: creating test/common_plat/validation/api/scheduler/Makefile config.status: creating test/common_plat/validation/api/shmem/Makefile config.status: creating test/common_plat/validation/api/std_clib/Makefile config.status: creating test/common_plat/validation/api/system/Makefile config.status: creating test/common_plat/validation/api/thread/Makefile config.status: creating test/common_plat/validation/api/time/Makefile config.status: creating test/common_plat/validation/api/timer/Makefile config.status: creating test/common_plat/validation/api/traffic_mngr/Makefile config.status: creating test/Makefile config.status: creating Makefile config.status: creating helper/Makefile config.status: creating helper/test/Makefile config.status: creating pkgconfig/libodp-linux.pc config.status: creating pkgconfig/libodphelper-linux.pc config.status: creating helper/config.h config.status: executing depfiles commands config.status: executing libtool commands opendataplane 1.12.0.0 ODP Library version: 112:0:0 Helper Library version: 110:1:1 implementation_name: odp-linux ARCH_DIR x86 with_platform: linux-generic prefix: <https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=distcheck,label…> sysconfdir: ${prefix}/etc libdir: ${exec_prefix}/lib includedir: ${prefix}/include testdir: ${exec_prefix}/lib/odp/tests WITH_ARCH: x86 cc: gcc cc version: 4.9.2 cppflags: am_cppflags: am_cxxflags: -std=c++11 cflags: -g -O2 am_cflags: -pthread -DHAVE_PCAP -DIMPLEMENTATION_NAME=odp-linux -DODP_DEBUG_PRINT=0 -DODP_DEBUG=0 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -std=c99 ldflags: am_ldflags: -pthread -lrt libs: -lrt -lcunit -lcrypto -lpcap defs: -DHAVE_CONFIG_H static libraries: yes shared libraries: yes ABI compatible: yes cunit: yes test_vald: yes test_perf: yes test_perf_proc: no test_cpp: yes test_helper: no test_example: no user_guides: no make[1]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=distcheck,label…'> Making all in platform/linux-generic make[2]: Entering directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=distcheck,label…'> CC _fdserver.lo CC _ishm.lo CC _ishmphy.lo CC odp_atomic.lo CC odp_barrier.lo CC odp_buffer.lo CC odp_byteorder.lo CC odp_classification.lo CC odp_cpu.lo CC odp_cpumask.lo CC odp_cpumask_task.lo CC odp_crypto.lo CC odp_errno.lo CC odp_event.lo CC odp_hash.lo CC odp_init.lo CC odp_impl.lo CC odp_name_table.lo CC odp_packet.lo ../../../platform/linux-generic/odp_packet.c: In function 'odp_packet_trunc_head': ../../../platform/linux-generic/odp_packet.c:314:46: error: array subscript is above array bounds [-Werror=array-bounds] to->buf_hdr.seg[i].len = from->buf_hdr.seg[num + i].len; ^ cc1: all warnings being treated as errors Makefile:871: recipe for target 'odp_packet.lo' failed make[2]: *** [odp_packet.lo] Error 1 make[2]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=distcheck,label…'> Makefile:479: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '<https://ci.linaro.org/jenkins/job/odp-tool-check/build_type=distcheck,label…'> Makefile:685: recipe for target 'distcheck' failed make: *** [distcheck] Error 1 + cleanup_exit + isdebug echo 'build: entering function: cleanup_exit()' + '[' 0 -eq 1 ']' + [[ 0 -eq 1 ]] + isdebug echo 'build: exiting function: cleanup_exit()' + '[' 0 -eq 1 ']' + retcode=2 + set -e + '[' -d check-odp/build/odp/testdir/ ']' + test -d /home/buildslave/bin + mkdir /home/buildslave/bin + wget https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py -O /home/buildslave/bin/linaro-cp.py --2016-12-20 14:45:10-- https://git.linaro.org/ci/publishing-api.git/blob_plain/HEAD:/linaro-cp.py Resolving git.linaro.org (git.linaro.org)... 46.137.111.246 Connecting to git.linaro.org (git.linaro.org)|46.137.111.246|:443... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py [following] --2016-12-20 14:45:11-- https://git.linaro.org/ci/publishing-api.git/plain/linaro-cp.py Reusing existing connection to git.linaro.org:443. HTTP request sent, awaiting response... 200 OK Length: 9686 (9.5K) [text/plain] Saving to: ‘/home/buildslave/bin/linaro-cp.py’ 0K ......... 100% 37.6M=0s 2016-12-20 14:45:11 (37.6 MB/s) - ‘/home/buildslave/bin/linaro-cp.py’ saved [9686/9686] + '[' -d out ']' + '[' 2 -ne 0 ']' + exit 1 Build step 'Execute shell' marked build as failure Skipping publisher since build result is FAILURE [YAD-PLUGIN] Injecting DOCKER_CONTAINER_ID variable. [YAD-PLUGIN] Injecting JENKINS_CLOUD_ID variable. [YAD-PLUGIN] DOCKER_HOST variable.

8 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lng-ci