From: Will Deacon will.deacon@arm.com

commit b9a4b9d084d978f80eb9210727c81804588b42ff upstream.

FAR_EL1 is UNKNOWN for all debug exceptions other than those caused by taking a hardware watchpoint. Unfortunately, if a debug handler returns a non-zero value, then we will propagate the UNKNOWN FAR value to userspace via the si_addr field of the SIGTRAP siginfo_t.

Instead, let's set si_addr to take on the PC of the faulting instruction, which we have available in the current pt_regs.

Cc: stable@vger.kernel.org Reviewed-by: Mark Rutland mark.rutland@arm.com Signed-off-by: Will Deacon will.deacon@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm64/mm/fault.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -589,11 +589,12 @@ void __init hook_debug_fault_code(int nr debug_fault_info[nr].name = name; }

-asmlinkage int __exception do_debug_exception(unsigned long addr, +asmlinkage int __exception do_debug_exception(unsigned long addr_if_watchpoint, unsigned int esr, struct pt_regs *regs) { const struct fault_info *inf = debug_fault_info + DBG_ESR_EVT(esr); + unsigned long pc = instruction_pointer(regs); struct siginfo info; int rv;

@@ -604,16 +605,16 @@ asmlinkage int __exception do_debug_exce if (interrupts_enabled(regs)) trace_hardirqs_off();

- if (!inf->fn(addr, esr, regs)) { + if (!inf->fn(addr_if_watchpoint, esr, regs)) { rv = 1; } else { pr_alert("Unhandled debug exception: %s (0x%08x) at 0x%016lx\n", - inf->name, esr, addr); + inf->name, esr, pc);

info.si_signo = inf->sig; info.si_errno = 0; info.si_code = inf->code; - info.si_addr = (void __user *)addr; + info.si_addr = (void __user *)pc; arm64_notify_die("", regs, &info, 0); rv = 0; }

From: zhangyi (F) yi.zhang@huawei.com

commit 5e86bdda41534e17621d5a071b294943cae4376e upstream.

Currently, we are releasing the indirect buffer where we are done with it in ext4_ind_remove_space(), so we can see the brelse() and BUFFER_TRACE() everywhere. It seems fragile and hard to read, and we may probably forget to release the buffer some day. This patch cleans up the code by putting of the code which releases the buffers to the end of the function.

Signed-off-by: zhangyi (F) yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Reviewed-by: Jan Kara jack@suse.cz Cc: Jari Ruusu jari.ruusu@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/ext4/indirect.c | 47 ++++++++++++++++++++++------------------------- 1 file changed, 22 insertions(+), 25 deletions(-)

--- a/fs/ext4/indirect.c +++ b/fs/ext4/indirect.c @@ -1323,6 +1323,7 @@ int ext4_ind_remove_space(handle_t *hand ext4_lblk_t offsets[4], offsets2[4]; Indirect chain[4], chain2[4]; Indirect *partial, *partial2; + Indirect *p = NULL, *p2 = NULL; ext4_lblk_t max_block; __le32 nr = 0, nr2 = 0; int n = 0, n2 = 0; @@ -1364,7 +1365,7 @@ int ext4_ind_remove_space(handle_t *hand }

- partial = ext4_find_shared(inode, n, offsets, chain, &nr); + partial = p = ext4_find_shared(inode, n, offsets, chain, &nr); if (nr) { if (partial == chain) { /* Shared branch grows from the inode */ @@ -1389,13 +1390,11 @@ int ext4_ind_remove_space(handle_t *hand partial->p + 1, (__le32 *)partial->bh->b_data+addr_per_block, (chain+n-1) - partial); - BUFFER_TRACE(partial->bh, "call brelse"); - brelse(partial->bh); partial--; }

end_range: - partial2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2); + partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2); if (nr2) { if (partial2 == chain2) { /* @@ -1425,16 +1424,14 @@ end_range: (__le32 *)partial2->bh->b_data, partial2->p, (chain2+n2-1) - partial2); - BUFFER_TRACE(partial2->bh, "call brelse"); - brelse(partial2->bh); partial2--; } goto do_indirects; }

/* Punch happened within the same level (n == n2) */ - partial = ext4_find_shared(inode, n, offsets, chain, &nr); - partial2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2); + partial = p = ext4_find_shared(inode, n, offsets, chain, &nr); + partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);

/* Free top, but only if partial2 isn't its subtree. */ if (nr) { @@ -1491,15 +1488,7 @@ end_range: partial->p + 1, partial2->p, (chain+n-1) - partial); - while (partial > chain) { - BUFFER_TRACE(partial->bh, "call brelse"); - brelse(partial->bh); - } - while (partial2 > chain2) { - BUFFER_TRACE(partial2->bh, "call brelse"); - brelse(partial2->bh); - } - return 0; + goto cleanup; }

/* @@ -1514,8 +1503,6 @@ end_range: partial->p + 1, (__le32 *)partial->bh->b_data+addr_per_block, (chain+n-1) - partial); - BUFFER_TRACE(partial->bh, "call brelse"); - brelse(partial->bh); partial--; } if (partial2 > chain2 && depth2 <= depth) { @@ -1523,11 +1510,21 @@ end_range: (__le32 *)partial2->bh->b_data, partial2->p, (chain2+n2-1) - partial2); - BUFFER_TRACE(partial2->bh, "call brelse"); - brelse(partial2->bh); partial2--; } } + +cleanup: + while (p && p > chain) { + BUFFER_TRACE(p->bh, "call brelse"); + brelse(p->bh); + p--; + } + while (p2 && p2 > chain2) { + BUFFER_TRACE(p2->bh, "call brelse"); + brelse(p2->bh); + p2--; + } return 0;

do_indirects: @@ -1535,7 +1532,7 @@ do_indirects: switch (offsets[0]) { default: if (++n >= n2) - return 0; + break; nr = i_data[EXT4_IND_BLOCK]; if (nr) { ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); @@ -1543,7 +1540,7 @@ do_indirects: } case EXT4_IND_BLOCK: if (++n >= n2) - return 0; + break; nr = i_data[EXT4_DIND_BLOCK]; if (nr) { ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); @@ -1551,7 +1548,7 @@ do_indirects: } case EXT4_DIND_BLOCK: if (++n >= n2) - return 0; + break; nr = i_data[EXT4_TIND_BLOCK]; if (nr) { ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); @@ -1560,5 +1557,5 @@ do_indirects: case EXT4_TIND_BLOCK: ; } - return 0; + goto cleanup; }

From: Razvan Stefanescu razvan.stefanescu@microchip.com

commit f3040983132bf3477acd45d2452a906e67c2fec9 upstream.

Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking.

Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable stable@vger.kernel.org Signed-off-by: Razvan Stefanescu razvan.stefanescu@microchip.com Acked-by: Richard Genoud richard.genoud@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/serial/atmel_serial.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)

--- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -237,6 +237,12 @@ static inline void atmel_uart_write_char

#endif

+static inline int atmel_uart_is_half_duplex(struct uart_port *port) +{ + return (port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX); +} + #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { @@ -481,9 +487,9 @@ static void atmel_stop_tx(struct uart_po /* Disable interrupts */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);

- if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) + if (atmel_uart_is_half_duplex(port)) atmel_start_rx(port); + }

/* @@ -500,8 +506,7 @@ static void atmel_start_tx(struct uart_p return;

if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port)) - if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) + if (atmel_uart_is_half_duplex(port)) atmel_stop_rx(port);

if (atmel_use_pdc_tx(port)) @@ -810,8 +815,7 @@ static void atmel_complete_tx_dma(void * */ if (!uart_circ_empty(xmit)) tasklet_schedule(&atmel_port->tasklet); - else if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { + else if (atmel_uart_is_half_duplex(port)) { /* DMA done, stop TX, start RX for RS485 */ atmel_start_rx(port); } @@ -1388,8 +1392,7 @@ static void atmel_tx_pdc(struct uart_por atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); } else { - if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { + if (atmel_uart_is_half_duplex(port)) { /* DMA done, stop TX, start RX for RS485 */ atmel_start_rx(port); }

From: Jeremy Compostella jeremy.compostella@intel.com

commit 89c6efa61f5709327ecfa24bff18e57a4e80c7fa upstream.

On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes data out of the msgbuf1 array boundary.

It is possible from a user application to run into that issue by calling the I2C_SMBUS ioctl with data.block[0] greater than I2C_SMBUS_BLOCK_MAX + 1.

This patch makes the code compliant with Documentation/i2c/dev-interface by raising an error when the requested size is larger than 32 bytes.

Call Trace: [<ffffffff8139f695>] dump_stack+0x67/0x92 [<ffffffff811802a4>] panic+0xc5/0x1eb [<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30 [<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20 [<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0 [<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490 [<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60 [<ffffffff811f7869>] SyS_ioctl+0x79/0x90 [<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a

Signed-off-by: Jeremy Compostella jeremy.compostella@intel.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Cc: stable@kernel.org [connoro@google.com: 4.9 backport: adjust filename] Signed-off-by: Connor O'Brien connoro@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/i2c/i2c-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -2936,16 +2936,16 @@ static s32 i2c_smbus_xfer_emulated(struc the underlying bus driver */ break; case I2C_SMBUS_I2C_BLOCK_DATA: + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, "Invalid block %s size %d\n", + read_write == I2C_SMBUS_READ ? "read" : "write", + data->block[0]); + return -EINVAL; + } if (read_write == I2C_SMBUS_READ) { msg[1].len = data->block[0]; } else { msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } for (i = 1; i <= data->block[0]; i++) msgbuf0[i] = data->block[i]; }

From: Razvan Stefanescu razvan.stefanescu@microchip.com

commit 69646d7a3689fbe1a65ae90397d22ac3f1b8d40f upstream.

In half-duplex operation, RX should be started after TX completes.

If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet.

Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared.

Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by: Razvan Stefanescu razvan.stefanescu@microchip.com Acked-by: Richard Genoud richard.genoud@gmail.com Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/serial/atmel_serial.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -169,6 +169,8 @@ struct atmel_uart_port { unsigned int pending_status; spinlock_t lock_suspended;

+ bool hd_start_rx; /* can start RX during half-duplex operation */ + int (*prepare_rx)(struct uart_port *port); int (*prepare_tx)(struct uart_port *port); void (*schedule_rx)(struct uart_port *port); @@ -816,8 +818,13 @@ static void atmel_complete_tx_dma(void * if (!uart_circ_empty(xmit)) tasklet_schedule(&atmel_port->tasklet); else if (atmel_uart_is_half_duplex(port)) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); + /* + * DMA done, re-enable TXEMPTY and signal that we can stop + * TX and start RX for RS485 + */ + atmel_port->hd_start_rx = true; + atmel_uart_writel(port, ATMEL_US_IER, + atmel_port->tx_done_mask); }

spin_unlock_irqrestore(&port->lock, flags); @@ -1257,9 +1264,20 @@ atmel_handle_transmit(struct uart_port * struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);

if (pending & atmel_port->tx_done_mask) { - /* Either PDC or interrupt transmission */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); + + /* Start RX if flag was set and FIFO is empty */ + if (atmel_port->hd_start_rx) { + if (!(atmel_uart_readl(port, ATMEL_US_CSR) + & ATMEL_US_TXEMPTY)) + dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n"); + + atmel_port->hd_start_rx = false; + atmel_start_rx(port); + return; + } + tasklet_schedule(&atmel_port->tasklet); } }

[ Upstream commit fc2b47b55f17fd996f7a01975ce1c33c2f2513f6 ]

It believe it is a bad idea to hardcode a specific compiler prefix that may or may not be installed on a user's system. It is annoying when testing features that should not require compilers at all.

For example, mrproper, headers_install, etc. should work without any compiler.

They look like follows on my machine.

$ make ARCH=h8300 mrproper ./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found ./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found make: h8300-unknown-linux-gcc: Command not found make: h8300-unknown-linux-gcc: Command not found [ a bunch of the same error messages continue ]

$ make ARCH=h8300 headers_install ./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found ./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found make: h8300-unknown-linux-gcc: Command not found HOSTCC scripts/basic/fixdep make: h8300-unknown-linux-gcc: Command not found WRAP arch/h8300/include/generated/uapi/asm/kvm_para.h [ snip ]

The solution is to delete this line, or to use cc-cross-prefix like some architectures do. I chose the latter as a moderate fixup.

I added an alternative 'h8300-linux-' because it is available at:

https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/h8300/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile index e1c02ca230cb..073bba6f9f60 100644 --- a/arch/h8300/Makefile +++ b/arch/h8300/Makefile @@ -23,7 +23,7 @@ KBUILD_AFLAGS += $(aflags-y) LDFLAGS += $(ldflags-y)

ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := h8300-unknown-linux- +CROSS_COMPILE := $(call cc-cross-prefix, h8300-unknown-linux- h8300-linux-) endif

core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/

[ Upstream commit d01849f7deba81f4959fd9e51bf20dbf46987d1c ]

Tony notes that the GPIO module does not idle when level interrupts are in use, as the wakeup appears to get stuck.

After extensive investigation, it appears that the wakeup will only be cleared if the interrupt status register is cleared while the interrupt is enabled. However, we are currently clearing it with the interrupt disabled for level-based interrupts.

It is acknowledged that this observed behaviour conflicts with a statement in the TRM:

CAUTION After servicing the interrupt, the status bit in the interrupt status register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be reset and the interrupt line released (by setting the corresponding bit of the interrupt status register to 1) before enabling an interrupt for the GPIO channel in the interrupt-enable register (GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent the occurrence of unexpected interrupts when enabling an interrupt for the GPIO channel.

However, this does not appear to be a practical problem.

Further, as reported by Grygorii Strashko grygorii.strashko@ti.com, the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP: Fix the sequence to clear the IRQ status" saying:

if the status is cleared after disabling the IRQ then sWAKEUP will not be cleared and gates the module transition

When we unmask the level interrupt after the interrupt has been handled, enable the interrupt and only then clear the interrupt. If the interrupt is still pending, the hardware will re-assert the interrupt status.

Should the caution note in the TRM prove to be a problem, we could use a clear-enable-clear sequence instead.

Cc: Aaro Koskinen aaro.koskinen@iki.fi Cc: Keerthy j-keerthy@ti.com Cc: Peter Ujfalusi peter.ujfalusi@ti.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk [tony@atomide.com: updated comments based on an earlier TI patch] Signed-off-by: Tony Lindgren tony@atomide.com Acked-by: Grygorii Strashko grygorii.strashko@ti.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-omap.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index f7fbb46d5d79..9943273ec981 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -872,14 +872,16 @@ static void omap_gpio_unmask_irq(struct irq_data *d) if (trigger) omap_set_gpio_triggering(bank, offset, trigger);

- /* For level-triggered GPIOs, the clearing must be done after - * the HW source is cleared, thus after the handler has run */ - if (bank->level_mask & BIT(offset)) { - omap_set_gpio_irqenable(bank, offset, 0); + omap_set_gpio_irqenable(bank, offset, 1); + + /* + * For level-triggered GPIOs, clearing must be done after the source + * is cleared, thus after the handler has run. OMAP4 needs this done + * after enabing the interrupt to clear the wakeup status. + */ + if (bank->level_mask & BIT(offset)) omap_clear_gpio_irqstatus(bank, offset); - }

- omap_set_gpio_irqenable(bank, offset, 1); raw_spin_unlock_irqrestore(&bank->lock, flags); }

[ Upstream commit 43d281662fdb46750d49417559b71069f435298d ]

The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables.

Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t:

drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]

As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly.

Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts") Signed-off-by: Arnd Bergmann arnd@arndb.de Reviewed-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cisco/enic/enic_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 9ef4caa4b84d..3c20d0dc9256 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -120,7 +120,7 @@ static void enic_init_affinity_hint(struct enic *enic)

for (i = 0; i < enic->intr_count; i++) { if (enic_is_err_intr(enic, i) || enic_is_notify_intr(enic, i) || - (enic->msix[i].affinity_mask && + (cpumask_available(enic->msix[i].affinity_mask) && !cpumask_empty(enic->msix[i].affinity_mask))) continue; if (zalloc_cpumask_var(&enic->msix[i].affinity_mask, @@ -149,7 +149,7 @@ static void enic_set_affinity_hint(struct enic *enic) for (i = 0; i < enic->intr_count; i++) { if (enic_is_err_intr(enic, i) || enic_is_notify_intr(enic, i) || - !enic->msix[i].affinity_mask || + !cpumask_available(enic->msix[i].affinity_mask) || cpumask_empty(enic->msix[i].affinity_mask)) continue; err = irq_set_affinity_hint(enic->msix_entry[i].vector, @@ -162,7 +162,7 @@ static void enic_set_affinity_hint(struct enic *enic) for (i = 0; i < enic->wq_count; i++) { int wq_intr = enic_msix_wq_intr(enic, i);

- if (enic->msix[wq_intr].affinity_mask && + if (cpumask_available(enic->msix[wq_intr].affinity_mask) && !cpumask_empty(enic->msix[wq_intr].affinity_mask)) netif_set_xps_queue(enic->netdev, enic->msix[wq_intr].affinity_mask,

[ Upstream commit 0c81585499601acd1d0e1cbf424cabfaee60628c ]

After offlining a memory block, kmemleak scan will trigger a crash, as it encounters a page ext address that has already been freed during memory offlining. At the beginning in alloc_page_ext(), it calls kmemleak_alloc(), but it does not call kmemleak_free() in free_page_ext().

BUG: unable to handle kernel paging request at ffff888453d00000 PGD 128a01067 P4D 128a01067 PUD 128a04067 PMD 47e09e067 PTE 800ffffbac2ff060 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 1 PID: 1594 Comm: bash Not tainted 5.0.0-rc8+ #15 Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017 RIP: 0010:scan_block+0xb5/0x290 Code: 85 6e 01 00 00 48 b8 00 00 30 f5 81 88 ff ff 48 39 c3 0f 84 5b 01 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 0f 85 87 01 00 00 <4c> 8b 3b e8 f3 0c fa ff 4c 39 3d 0c 6b 4c 01 0f 87 08 01 00 00 4c RSP: 0018:ffff8881ec57f8e0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff888453d00000 RCX: ffffffffa61e5a54 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff888453d00000 RBP: ffff8881ec57f920 R08: fffffbfff4ed588d R09: fffffbfff4ed588c R10: fffffbfff4ed588c R11: ffffffffa76ac463 R12: dffffc0000000000 R13: ffff888453d00ff9 R14: ffff8881f80cef48 R15: ffff8881f80cef48 FS: 00007f6c0e3f8740(0000) GS:ffff8881f7680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888453d00000 CR3: 00000001c4244003 CR4: 00000000001606a0 Call Trace: scan_gray_list+0x269/0x430 kmemleak_scan+0x5a8/0x10f0 kmemleak_write+0x541/0x6ca full_proxy_write+0xf8/0x190 __vfs_write+0xeb/0x980 vfs_write+0x15a/0x4f0 ksys_write+0xd2/0x1b0 __x64_sys_write+0x73/0xb0 do_syscall_64+0xeb/0xaaa entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f6c0dad73b8 Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 63 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 RSP: 002b:00007ffd5b863cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f6c0dad73b8 RDX: 0000000000000005 RSI: 000055a9216e1710 RDI: 0000000000000001 RBP: 000055a9216e1710 R08: 000000000000000a R09: 00007ffd5b863840 R10: 000000000000000a R11: 0000000000000246 R12: 00007f6c0dda9780 R13: 0000000000000005 R14: 00007f6c0dda4740 R15: 0000000000000005 Modules linked in: nls_iso8859_1 nls_cp437 vfat fat kvm_intel kvm irqbypass efivars ip_tables x_tables xfs sd_mod ahci libahci igb i2c_algo_bit libata i2c_core dm_mirror dm_region_hash dm_log dm_mod efivarfs CR2: ffff888453d00000 ---[ end trace ccf646c7456717c5 ]--- Kernel panic - not syncing: Fatal exception Shutting down cpus with NMI Kernel Offset: 0x24c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]---

Link: http://lkml.kernel.org/r/20190227173147.75650-1-cai@lca.pw Signed-off-by: Qian Cai cai@lca.pw Reviewed-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/page_ext.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/mm/page_ext.c b/mm/page_ext.c index 4d1eac0d4fc5..de1f34c5a2f1 100644 --- a/mm/page_ext.c +++ b/mm/page_ext.c @@ -255,6 +255,7 @@ static void free_page_ext(void *addr) table_size = sizeof(struct page_ext) * PAGES_PER_SECTION;

BUG_ON(PageReserved(page)); + kmemleak_free(addr); free_pages_exact(addr, table_size); } }

[ Upstream commit 92d1d07daad65c300c7d0b68bbef8867e9895d54 ]

Kmemleak throws endless warnings during boot due to in __alloc_alien_cache(),

alc = kmalloc_node(memsize, gfp, node); init_arraycache(&alc->ac, entries, batch); kmemleak_no_scan(ac);

Kmemleak does not track the array cache (alc->ac) but the alien cache (alc) instead, so let it track the latter by lifting kmemleak_no_scan() out of init_arraycache().

There is another place that calls init_arraycache(), but alloc_kmem_cache_cpus() uses the percpu allocation where will never be considered as a leak.

kmemleak: Found object by alias at 0xffff8007b9aa7e38 CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2 Call trace: dump_backtrace+0x0/0x168 show_stack+0x24/0x30 dump_stack+0x88/0xb0 lookup_object+0x84/0xac find_and_get_object+0x84/0xe4 kmemleak_no_scan+0x74/0xf4 setup_kmem_cache_node+0x2b4/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 ret_from_fork+0x10/0x18 kmemleak: Object 0xffff8007b9aa7e00 (size 256): kmemleak: comm "swapper/0", pid 1, jiffies 4294697137 kmemleak: min_count = 1 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: kmemleak_alloc+0x84/0xb8 kmem_cache_alloc_node_trace+0x31c/0x3a0 __kmalloc_node+0x58/0x78 setup_kmem_cache_node+0x26c/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 kmemleak: Not scanning unknown object at 0xffff8007b9aa7e38 CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2 Call trace: dump_backtrace+0x0/0x168 show_stack+0x24/0x30 dump_stack+0x88/0xb0 kmemleak_no_scan+0x90/0xf4 setup_kmem_cache_node+0x2b4/0x35c __do_tune_cpucache+0x250/0x2d4 do_tune_cpucache+0x4c/0xe4 enable_cpucache+0xc8/0x110 setup_cpu_cache+0x40/0x1b8 __kmem_cache_create+0x240/0x358 create_cache+0xc0/0x198 kmem_cache_create_usercopy+0x158/0x20c kmem_cache_create+0x50/0x64 fsnotify_init+0x58/0x6c do_one_initcall+0x194/0x388 kernel_init_freeable+0x668/0x688 kernel_init+0x18/0x124 ret_from_fork+0x10/0x18

Link: http://lkml.kernel.org/r/20190129184518.39808-1-cai@lca.pw Fixes: 1fe00d50a9e8 ("slab: factor out initialization of array cache") Signed-off-by: Qian Cai cai@lca.pw Reviewed-by: Andrew Morton akpm@linux-foundation.org Cc: Christoph Lameter cl@linux.com Cc: Pekka Enberg penberg@kernel.org Cc: David Rientjes rientjes@google.com Cc: Joonsoo Kim iamjoonsoo.kim@lge.com Cc: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/slab.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/mm/slab.c b/mm/slab.c index 92df044f5e00..d043b8007f23 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -660,14 +660,6 @@ static void start_cpu_timer(int cpu)

static void init_arraycache(struct array_cache *ac, int limit, int batch) { - /* - * The array_cache structures contain pointers to free object. - * However, when such objects are allocated or transferred to another - * cache the pointers are not cleared and they could be counted as - * valid references during a kmemleak scan. Therefore, kmemleak must - * not scan such objects. - */ - kmemleak_no_scan(ac); if (ac) { ac->avail = 0; ac->limit = limit; @@ -683,6 +675,14 @@ static struct array_cache *alloc_arraycache(int node, int entries, struct array_cache *ac = NULL;

ac = kmalloc_node(memsize, gfp, node); + /* + * The array_cache structures contain pointers to free object. + * However, when such objects are allocated or transferred to another + * cache the pointers are not cleared and they could be counted as + * valid references during a kmemleak scan. Therefore, kmemleak must + * not scan such objects. + */ + kmemleak_no_scan(ac); init_arraycache(ac, entries, batchcount); return ac; } @@ -876,6 +876,7 @@ static struct alien_cache *__alloc_alien_cache(int node, int entries,

alc = kmalloc_node(memsize, gfp, node); if (alc) { + kmemleak_no_scan(alc); init_arraycache(&alc->ac, entries, batch); spin_lock_init(&alc->lock); }

[ Upstream commit 9083977dabf3833298ddcd40dee28687f1e6b483 ]

Fix below warning coming because of using mutex lock in atomic context.

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:98 in_atomic(): 1, irqs_disabled(): 0, pid: 585, name: sh Preemption disabled at: __radix_tree_preload+0x28/0x130 Call trace: dump_backtrace+0x0/0x2b4 show_stack+0x20/0x28 dump_stack+0xa8/0xe0 ___might_sleep+0x144/0x194 __might_sleep+0x58/0x8c mutex_lock+0x2c/0x48 f2fs_trace_pid+0x88/0x14c f2fs_set_node_page_dirty+0xd0/0x184

Do not use f2fs_radix_tree_insert() to avoid doing cond_resched() with spin_lock() acquired.

Signed-off-by: Sahitya Tummala stummala@codeaurora.org Reviewed-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/trace.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/trace.c b/fs/f2fs/trace.c index 145fb659ad44..8f327fa7ae47 100644 --- a/fs/f2fs/trace.c +++ b/fs/f2fs/trace.c @@ -60,6 +60,7 @@ void f2fs_trace_pid(struct page *page)

page->private = pid;

+retry: if (radix_tree_preload(GFP_NOFS)) return;

@@ -70,7 +71,12 @@ void f2fs_trace_pid(struct page *page) if (p) radix_tree_delete(&pids, pid);

- f2fs_radix_tree_insert(&pids, pid, current); + if (radix_tree_insert(&pids, pid, current)) { + spin_unlock(&pids_lock); + radix_tree_preload_end(); + cond_resched(); + goto retry; + }

trace_printk("%3x:%3x %4x %-16s\n", MAJOR(inode->i_sb->s_dev), MINOR(inode->i_sb->s_dev),

[ Upstream commit 259594bea574e515a148171b5cd84ce5cbdc028a ]

When compiling with -Wformat, clang emits the following warnings:

fs/cifs/smb1ops.c:312:20: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] tgt_total_cnt, total_in_tgt); ^~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:289:4: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->flags, ref->server_type); ^~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:289:16: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->flags, ref->server_type); ^~~~~~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:291:4: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->ref_flag, ref->path_consumed); ^~~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:291:19: warning: format specifies type 'short' but the argument has type 'int' [-Wformat] ref->ref_flag, ref->path_consumed); ^~~~~~~~~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for ints and unsigned ints.

Link: https://github.com/ClangBuiltLinux/linux/issues/378

Signed-off-by: Louis Taylor louis@kragniz.eu Signed-off-by: Steve French stfrench@microsoft.com Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/cifs_dfs_ref.c | 4 ++-- fs/cifs/smb1ops.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 7dc886c9a78f..1ea643faf04b 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -266,9 +266,9 @@ static void dump_referral(const struct dfs_info3_param *ref) { cifs_dbg(FYI, "DFS: ref path: %s\n", ref->path_name); cifs_dbg(FYI, "DFS: node path: %s\n", ref->node_name); - cifs_dbg(FYI, "DFS: fl: %hd, srv_type: %hd\n", + cifs_dbg(FYI, "DFS: fl: %d, srv_type: %d\n", ref->flags, ref->server_type); - cifs_dbg(FYI, "DFS: ref_flags: %hd, path_consumed: %hd\n", + cifs_dbg(FYI, "DFS: ref_flags: %d, path_consumed: %d\n", ref->ref_flag, ref->path_consumed); }

diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c index efd72e1fae74..f7a9adab0b84 100644 --- a/fs/cifs/smb1ops.c +++ b/fs/cifs/smb1ops.c @@ -305,7 +305,7 @@ coalesce_t2(char *second_buf, struct smb_hdr *target_hdr) remaining = tgt_total_cnt - total_in_tgt;

if (remaining < 0) { - cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%hu\n", + cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%u\n", tgt_total_cnt, total_in_tgt); return -EPROTO; }

[ Upstream commit 68e2672f8fbd1e04982b8d2798dd318bf2515dd2 ]

There is a NULL pointer dereference of devname in strspn()

The oops looks something like:

CIFS: Attempting to mount (null) BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:strspn+0x0/0x50 ... Call Trace: ? cifs_parse_mount_options+0x222/0x1710 [cifs] ? cifs_get_volume_info+0x2f/0x80 [cifs] cifs_setup_volume_info+0x20/0x190 [cifs] cifs_get_volume_info+0x50/0x80 [cifs] cifs_smb3_do_mount+0x59/0x630 [cifs] ? ida_alloc_range+0x34b/0x3d0 cifs_do_mount+0x11/0x20 [cifs] mount_fs+0x52/0x170 vfs_kern_mount+0x6b/0x170 do_mount+0x216/0xdc0 ksys_mount+0x83/0xd0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a NULL check on devname in cifs_parse_devname()

Signed-off-by: Yao Liu yotta.liu@ucloud.cn Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/connect.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index eacf57c24ca9..9cb72fd40eff 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1255,6 +1255,11 @@ cifs_parse_devname(const char *devname, struct smb_vol *vol) const char *delims = "/\"; size_t len;

+ if (unlikely(!devname || !*devname)) { + cifs_dbg(VFS, "Device name not specified.\n"); + return -EINVAL; + } + /* make sure we have a valid UNC double delimiter prefix */ len = strspn(devname, delims); if (len != 2)

[ Upstream commit 7c5b019e3a638a5a290b0ec020f6ca83d2ec2aaa ]

Fix buffer overflow observed when running perf test.

The overflow is when trying to evaluate "1ULL << (64 - 1)" which is resulting in -9223372036854775808 which overflows the 20 character buffer.

If is possible this bug has been reported before but I still don't see any fix checked in:

See: https://www.spinics.net/lists/linux-perf-users/msg07714.html

Reported-by: Michael Sartain mikesart@fastmail.com Reported-by: Mathias Krause minipli@googlemail.com Signed-off-by: Tony Jones tonyj@suse.de Acked-by: Steven Rostedt (VMware) rostedt@goodmis.org Cc: Frederic Weisbecker fweisbec@gmail.com Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a") Link: http://lkml.kernel.org/r/20190228015532.8941-1-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/traceevent/event-parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 6e4a10fe9dd0..743746a3c50d 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -2419,7 +2419,7 @@ static int arg_num_eval(struct print_arg *arg, long long *val) static char *arg_eval (struct print_arg *arg) { long long val; - static char buf[20]; + static char buf[24];

switch (arg->type) { case PRINT_ATOM:

[ Upstream commit 1749ef00f7312679f76d5e9104c5d1e22a829038 ]

We had a test-report where, under memory pressure, adding LUNs to the systems would fail (the tests add LUNs strictly in sequence):

[ 5525.853432] scsi 0:0:1:1088045124: Direct-Access IBM 2107900 .148 PQ: 0 ANSI: 5 [ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS [ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43 [ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0 [ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection [ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB) [ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off [ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08 [ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5525.857838] sdk: sdk1 [ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk [ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds [ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured [ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured

Looking at the code of scsi_alloc_sdev(), and all the calling contexts, there seems to be no reason to use GFP_ATMOIC here. All the different call-contexts use a mutex at some point, and nothing in between that requires no sleeping, as far as I could see. Additionally, the code that later allocates the block queue for the device (scsi_mq_alloc_queue()) already uses GFP_KERNEL.

There are similar allocations in two other functions: scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with GFP_KERNEL.

Here is the contexts for the three functions so far:

scsi_alloc_sdev() scsi_probe_and_add_lun() scsi_sequential_lun_scan() __scsi_scan_target() scsi_scan_target() mutex_lock() scsi_scan_channel() scsi_scan_host_selected() mutex_lock() scsi_report_lun_scan() __scsi_scan_target() ... __scsi_add_device() mutex_lock() __scsi_scan_target() ... scsi_report_lun_scan() ... scsi_get_host_dev() mutex_lock()

scsi_probe_and_add_lun() ...

scsi_add_lun() scsi_probe_and_add_lun() ...

So replace all these, and give them a bit of a better chance to succeed, with more chances of reclaim.

Signed-off-by: Benjamin Block bblock@linux.ibm.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_scan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 850ddc5fac04..3e2288af56bc 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -217,7 +217,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, extern void scsi_requeue_run_queue(struct work_struct *work);

sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size, - GFP_ATOMIC); + GFP_KERNEL); if (!sdev) goto out;

@@ -791,7 +791,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, */ sdev->inquiry = kmemdup(inq_result, max_t(size_t, sdev->inquiry_len, 36), - GFP_ATOMIC); + GFP_KERNEL); if (sdev->inquiry == NULL) return SCSI_SCAN_NO_RESPONSE;

@@ -1085,7 +1085,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, if (!sdev) goto out;

- result = kmalloc(result_len, GFP_ATOMIC | + result = kmalloc(result_len, GFP_KERNEL | ((shost->unchecked_isa_dma) ? __GFP_DMA : 0)); if (!result) goto out_free_sdev;

[ Upstream commit 74ffe79ae538283bbf7c155e62339f1e5c87b55a ]

Mostly unwind is done with irqs enabled however SLUB may call it with irqs disabled while creating a new SLUB cache.

I had system freeze while loading a module which called kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled interrupts and then

->new_slab_objects() ->new_slab() ->setup_object() ->setup_object_debug() ->init_tracking() ->set_track() ->save_stack_trace() ->save_stack_trace_tsk() ->walk_stackframe() ->unwind_frame() ->unwind_find_idx() =>spin_lock_irqsave(&unwind_lock);

Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/kernel/unwind.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 0bee233fef9a..314cfb232a63 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -93,7 +93,7 @@ extern const struct unwind_idx __start_unwind_idx[]; static const struct unwind_idx *__origin_unwind_idx; extern const struct unwind_idx __stop_unwind_idx[];

-static DEFINE_SPINLOCK(unwind_lock); +static DEFINE_RAW_SPINLOCK(unwind_lock); static LIST_HEAD(unwind_tables);

/* Convert a prel31 symbol to an absolute address */ @@ -201,7 +201,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr) /* module unwind tables */ struct unwind_table *table;

- spin_lock_irqsave(&unwind_lock, flags); + raw_spin_lock_irqsave(&unwind_lock, flags); list_for_each_entry(table, &unwind_tables, list) { if (addr >= table->begin_addr && addr < table->end_addr) { @@ -213,7 +213,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr) break; } } - spin_unlock_irqrestore(&unwind_lock, flags); + raw_spin_unlock_irqrestore(&unwind_lock, flags); }

pr_debug("%s: idx = %p\n", __func__, idx); @@ -529,9 +529,9 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, tab->begin_addr = text_addr; tab->end_addr = text_addr + text_size;

- spin_lock_irqsave(&unwind_lock, flags); + raw_spin_lock_irqsave(&unwind_lock, flags); list_add_tail(&tab->list, &unwind_tables); - spin_unlock_irqrestore(&unwind_lock, flags); + raw_spin_unlock_irqrestore(&unwind_lock, flags);

return tab; } @@ -543,9 +543,9 @@ void unwind_table_del(struct unwind_table *tab) if (!tab) return;

- spin_lock_irqsave(&unwind_lock, flags); + raw_spin_lock_irqsave(&unwind_lock, flags); list_del(&tab->list); - spin_unlock_irqrestore(&unwind_lock, flags); + raw_spin_unlock_irqrestore(&unwind_lock, flags);

kfree(tab); }

[ Upstream commit 135e7245479addc6b1f5d031e3d7e2ddb3d2b109 ]

Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings:

drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 6369d88b81c1..6b1cacd86c6e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2131,7 +2131,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter) if (strlen(netdev->name) < (IFNAMSIZ - 5)) snprintf(adapter->rx_ring->name, sizeof(adapter->rx_ring->name) - 1, - "%s-rx-0", netdev->name); + "%.14s-rx-0", netdev->name); else memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); err = request_irq(adapter->msix_entries[vector].vector, @@ -2147,7 +2147,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter) if (strlen(netdev->name) < (IFNAMSIZ - 5)) snprintf(adapter->tx_ring->name, sizeof(adapter->tx_ring->name) - 1, - "%s-tx-0", netdev->name); + "%.14s-tx-0", netdev->name); else memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); err = request_irq(adapter->msix_entries[vector].vector,

[ Upstream commit bcf3b67d16a4c8ffae0aa79de5853435e683945c ]

when create DMA pool for cmd frames failed, we should return -ENOMEM, instead of 0. In some case in:

megasas_init_adapter_fusion()

-->megasas_alloc_cmds() -->megasas_create_frame_pool create DMA pool failed, --> megasas_free_cmds() [1]

-->megasas_alloc_cmds_fusion() failed, then goto fail_alloc_cmds. -->megasas_free_cmds() [2]

we will call megasas_free_cmds twice, [1] will kfree cmd_list, [2] will use cmd_list.it will cause a problem:

Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc000f70000 [00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003, *pmd=0000001fbf894003, *pte=006000006d000707 Internal error: Oops: 96000005 [#1] SMP Modules linked in: CPU: 18 PID: 1 Comm: swapper/0 Not tainted task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000 PC is at megasas_free_cmds+0x30/0x70 LR is at megasas_free_cmds+0x24/0x70 ... Call trace: [<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70 [<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8 [<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760 [<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8 [<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4 [<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c [<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430 [<ffffffc00053a92c>] __driver_attach+0xa8/0xb0 [<ffffffc000538178>] bus_for_each_dev+0x74/0xc8 [<ffffffc000539e88>] driver_attach+0x28/0x34 [<ffffffc000539a18>] bus_add_driver+0x16c/0x248 [<ffffffc00053b234>] driver_register+0x6c/0x138 [<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c [<ffffffc000ce3868>] megasas_init+0xc0/0x1a8 [<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec [<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284 [<ffffffc0008d90b8>] kernel_init+0x1c/0xe4

Signed-off-by: Jason Yan yanaijie@huawei.com Acked-by: Sumit Saxena sumit.saxena@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/megaraid/megaraid_sas_base.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index ac7acd257c99..2422094f1f15 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -3847,6 +3847,7 @@ int megasas_alloc_cmds(struct megasas_instance *instance) if (megasas_create_frame_pool(instance)) { dev_printk(KERN_DEBUG, &instance->pdev->dev, "Error creating frame DMA pool\n"); megasas_free_cmds(instance); + return -ENOMEM; }

return 0;

[ Upstream commit 8fa857da9744f513036df1c43ab57f338941ae7d ]

The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference.

Detected by coccinelle with the following warnings: ./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device; call of_find_device_by_node on line 105, but without a corresponding object release within this function. ./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device; call of_find_device_by_node on line 105, but without a corresponding object release within this function.

Signed-off-by: Wen Yang yellowriver2010@hotmail.com Cc: Timur Tabi timur@kernel.org Cc: Nicolin Chen nicoleotsuka@gmail.com Cc: Xiubo Li Xiubo.Lee@gmail.com Cc: Fabio Estevam festevam@gmail.com Cc: Liam Girdwood lgirdwood@gmail.com Cc: Mark Brown broonie@kernel.org Cc: Jaroslav Kysela perex@perex.cz Cc: Takashi Iwai tiwai@suse.com Cc: Shawn Guo shawnguo@kernel.org Cc: Sascha Hauer s.hauer@pengutronix.de Cc: Pengutronix Kernel Team kernel@pengutronix.de Cc: NXP Linux Team linux-imx@nxp.com Cc: alsa-devel@alsa-project.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/imx-sgtl5000.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index b99e0b5e00e9..8e525f7ac08d 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -115,6 +115,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev) ret = -EPROBE_DEFER; goto fail; } + put_device(&ssi_pdev->dev); codec_dev = of_find_i2c_device_by_node(codec_np); if (!codec_dev) { dev_err(&pdev->dev, "failed to find codec platform device\n");

[ Upstream commit 4a88f89885c7cf65c62793f385261a6e3315178a ]

Fix the assigned type of mem2mem buffer handling API. Namely, these functions:

v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer.

Signed-off-by: Ezequiel Garcia ezequiel@collabora.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/s5p-jpeg/jpeg-core.c | 38 ++++++++++----------- 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c index 9c6fc09b88e0..80c83bba7af3 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c @@ -788,14 +788,14 @@ static void skip(struct s5p_jpeg_buffer *buf, long len); static void exynos4_jpeg_parse_decode_h_tbl(struct s5p_jpeg_ctx *ctx) { struct s5p_jpeg *jpeg = ctx->jpeg; - struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); + struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); struct s5p_jpeg_buffer jpeg_buffer; unsigned int word; int c, x, components;

jpeg_buffer.size = 2; /* Ls */ jpeg_buffer.data = - (unsigned long)vb2_plane_vaddr(vb, 0) + ctx->out_q.sos + 2; + (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.sos + 2; jpeg_buffer.curr = 0;

word = 0; @@ -825,14 +825,14 @@ static void exynos4_jpeg_parse_decode_h_tbl(struct s5p_jpeg_ctx *ctx) static void exynos4_jpeg_parse_huff_tbl(struct s5p_jpeg_ctx *ctx) { struct s5p_jpeg *jpeg = ctx->jpeg; - struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); + struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); struct s5p_jpeg_buffer jpeg_buffer; unsigned int word; int c, i, n, j;

for (j = 0; j < ctx->out_q.dht.n; ++j) { jpeg_buffer.size = ctx->out_q.dht.len[j]; - jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(vb, 0) + + jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.dht.marker[j]; jpeg_buffer.curr = 0;

@@ -884,13 +884,13 @@ static void exynos4_jpeg_parse_huff_tbl(struct s5p_jpeg_ctx *ctx) static void exynos4_jpeg_parse_decode_q_tbl(struct s5p_jpeg_ctx *ctx) { struct s5p_jpeg *jpeg = ctx->jpeg; - struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); + struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); struct s5p_jpeg_buffer jpeg_buffer; int c, x, components;

jpeg_buffer.size = ctx->out_q.sof_len; jpeg_buffer.data = - (unsigned long)vb2_plane_vaddr(vb, 0) + ctx->out_q.sof; + (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.sof; jpeg_buffer.curr = 0;

skip(&jpeg_buffer, 5); /* P, Y, X */ @@ -915,14 +915,14 @@ static void exynos4_jpeg_parse_decode_q_tbl(struct s5p_jpeg_ctx *ctx) static void exynos4_jpeg_parse_q_tbl(struct s5p_jpeg_ctx *ctx) { struct s5p_jpeg *jpeg = ctx->jpeg; - struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); + struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); struct s5p_jpeg_buffer jpeg_buffer; unsigned int word; int c, i, j;

for (j = 0; j < ctx->out_q.dqt.n; ++j) { jpeg_buffer.size = ctx->out_q.dqt.len[j]; - jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(vb, 0) + + jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.dqt.marker[j]; jpeg_buffer.curr = 0;

@@ -2016,15 +2016,15 @@ static void s5p_jpeg_device_run(void *priv) { struct s5p_jpeg_ctx *ctx = priv; struct s5p_jpeg *jpeg = ctx->jpeg; - struct vb2_buffer *src_buf, *dst_buf; + struct vb2_v4l2_buffer *src_buf, *dst_buf; unsigned long src_addr, dst_addr, flags;

spin_lock_irqsave(&ctx->jpeg->slock, flags);

src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx); - src_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0); - dst_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0); + src_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0); + dst_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);

s5p_jpeg_reset(jpeg->regs); s5p_jpeg_poweron(jpeg->regs); @@ -2097,7 +2097,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx) { struct s5p_jpeg *jpeg = ctx->jpeg; struct s5p_jpeg_fmt *fmt; - struct vb2_buffer *vb; + struct vb2_v4l2_buffer *vb; struct s5p_jpeg_addr jpeg_addr = {}; u32 pix_size, padding_bytes = 0;

@@ -2116,7 +2116,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx) vb = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx); }

- jpeg_addr.y = vb2_dma_contig_plane_dma_addr(vb, 0); + jpeg_addr.y = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);

if (fmt->colplanes == 2) { jpeg_addr.cb = jpeg_addr.y + pix_size - padding_bytes; @@ -2134,7 +2134,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx) static void exynos4_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx) { struct s5p_jpeg *jpeg = ctx->jpeg; - struct vb2_buffer *vb; + struct vb2_v4l2_buffer *vb; unsigned int jpeg_addr = 0;

if (ctx->mode == S5P_JPEG_ENCODE) @@ -2142,7 +2142,7 @@ static void exynos4_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx) else vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);

- jpeg_addr = vb2_dma_contig_plane_dma_addr(vb, 0); + jpeg_addr = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0); if (jpeg->variant->version == SJPEG_EXYNOS5433 && ctx->mode == S5P_JPEG_DECODE) jpeg_addr += ctx->out_q.sos; @@ -2257,7 +2257,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx) { struct s5p_jpeg *jpeg = ctx->jpeg; struct s5p_jpeg_fmt *fmt; - struct vb2_buffer *vb; + struct vb2_v4l2_buffer *vb; struct s5p_jpeg_addr jpeg_addr = {}; u32 pix_size;

@@ -2271,7 +2271,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx) fmt = ctx->cap_q.fmt; }

- jpeg_addr.y = vb2_dma_contig_plane_dma_addr(vb, 0); + jpeg_addr.y = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);

if (fmt->colplanes == 2) { jpeg_addr.cb = jpeg_addr.y + pix_size; @@ -2289,7 +2289,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx) static void exynos3250_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx) { struct s5p_jpeg *jpeg = ctx->jpeg; - struct vb2_buffer *vb; + struct vb2_v4l2_buffer *vb; unsigned int jpeg_addr = 0;

if (ctx->mode == S5P_JPEG_ENCODE) @@ -2297,7 +2297,7 @@ static void exynos3250_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx) else vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);

- jpeg_addr = vb2_dma_contig_plane_dma_addr(vb, 0); + jpeg_addr = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0); exynos3250_jpeg_jpgadr(jpeg->regs, jpeg_addr); }

[ Upstream commit 8d20dcefe471763f23ad538369ec65b51993ffff ]

Fix the assigned type of mem2mem buffer handling API. Namely, these functions:

v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer.

Signed-off-by: Ezequiel Garcia ezequiel@collabora.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/mx2_emmaprp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c index 03a1b606655d..009a4bb77d05 100644 --- a/drivers/media/platform/mx2_emmaprp.c +++ b/drivers/media/platform/mx2_emmaprp.c @@ -289,7 +289,7 @@ static void emmaprp_device_run(void *priv) { struct emmaprp_ctx *ctx = priv; struct emmaprp_q_data *s_q_data, *d_q_data; - struct vb2_buffer *src_buf, *dst_buf; + struct vb2_v4l2_buffer *src_buf, *dst_buf; struct emmaprp_dev *pcdev = ctx->dev; unsigned int s_width, s_height; unsigned int d_width, d_height; @@ -309,8 +309,8 @@ static void emmaprp_device_run(void *priv) d_height = d_q_data->height; d_size = d_width * d_height;

- p_in = vb2_dma_contig_plane_dma_addr(src_buf, 0); - p_out = vb2_dma_contig_plane_dma_addr(dst_buf, 0); + p_in = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0); + p_out = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0); if (!p_in || !p_out) { v4l2_err(&pcdev->v4l2_dev, "Acquiring kernel pointers to buffers failed\n");

[ Upstream commit 02106f883cd745523f7766d90a739f983f19e650 ]

Since kprobe breakpoing handler is using bsearch(), probing on this routine can cause recursive breakpoint problem.

int3 ->do_int3() ->ftrace_int3_handler() ->ftrace_location() ->ftrace_location_range() ->bsearch() -> int3

Prohibit probing on bsearch().

Signed-off-by: Andrea Righi righi.andrea@gmail.com Acked-by: Masami Hiramatsu mhiramat@kernel.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Arnaldo Carvalho de Melo acme@redhat.com Cc: Jiri Olsa jolsa@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Mathieu Desnoyers mathieu.desnoyers@efficios.com Cc: Peter Zijlstra peterz@infradead.org Cc: Steven Rostedt rostedt@goodmis.org Cc: Thomas Gleixner tglx@linutronix.de Link: http://lkml.kernel.org/r/154998813406.31052.8791425358974650922.stgit@devbox Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/bsearch.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/lib/bsearch.c b/lib/bsearch.c index e33c179089db..d50048446b77 100644 --- a/lib/bsearch.c +++ b/lib/bsearch.c @@ -11,6 +11,7 @@

#include <linux/export.h> #include <linux/bsearch.h> +#include <linux/kprobes.h>

/* * bsearch - binary search an array of elements @@ -51,3 +52,4 @@ void *bsearch(const void *key, const void *base, size_t num, size_t size, return NULL; } EXPORT_SYMBOL(bsearch); +NOKPROBE_SYMBOL(bsearch);

[ Upstream commit d9c0b2afe820fa3b3f8258a659daee2cc71ca3ef ]

BE dai links only have internal PCM's and their substream ops may not be set. Suspending these PCM's will result in their ops->trigger() being invoked and cause a kernel oops. So skip suspending PCM's if their ops are NULL.

[ NOTE: this change is required now for following the recent PCM core change to get rid of snd_pcm_suspend() call. Since DPCM BE takes the runtime carried from FE while keeping NULL ops, it can hit this bug. See details at: https://github.com/thesofproject/linux/pull/582 -- tiwai ]

Signed-off-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/core/pcm_native.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 4d6f0f56d54a..252392abd1b9 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1342,6 +1342,14 @@ int snd_pcm_suspend_all(struct snd_pcm *pcm) /* FIXME: the open/close code should lock this as well */ if (substream->runtime == NULL) continue; + + /* + * Skip BE dai link PCM's that are internal and may + * not have their substream ops set. + */ + if (!substream->ops) + continue; + err = snd_pcm_suspend(substream); if (err < 0 && err != -EBUSY) return err;

[ Upstream commit 8c27a3953e92eb0b22dbb03d599f543a05f9574e ]

People may set sequential_cutoff of a cached device via sysfs file, but current code does not check input value overflow. E.g. if value 4294967295 (UINT_MAX) is written to file sequential_cutoff, its value is 4GB, but if 4294967296 (UINT_MAX + 1) is written into, its value will be 0. This is an unexpected behavior.

This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert input string to unsigned integer value, and limit its range in [0, UINT_MAX]. Then the input overflow can be fixed.

Signed-off-by: Coly Li colyli@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/bcache/sysfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c index 87daccbbc61b..463ce6757338 100644 --- a/drivers/md/bcache/sysfs.c +++ b/drivers/md/bcache/sysfs.c @@ -215,7 +215,9 @@ STORE(__cached_dev) d_strtoul(writeback_rate_d_term); d_strtoul_nonzero(writeback_rate_p_term_inverse);

- d_strtoi_h(sequential_cutoff); + sysfs_strtoul_clamp(sequential_cutoff, + dc->sequential_cutoff, + 0, UINT_MAX); d_strtoi_h(readahead);

if (attr == &sysfs_clear_stats)

[ Upstream commit a5399db139cb3ad9b8502d8b1bd02da9ce0b9df0 ]

There is no clipping on the x or y axis for logos larger that the framebuffer size. Therefore: a logo bigger than screen size leads to invalid memory access:

[ 1.254664] Backtrace: [ 1.254728] [<c02714e0>] (cfb_imageblit) from [<c026184c>] (fb_show_logo+0x620/0x684) [ 1.254763] r10:00000003 r9:00027fd8 r8:c6a40000 r7:c6a36e50 r6:00000000 r5:c06b81e4 [ 1.254774] r4:c6a3e800 [ 1.254810] [<c026122c>] (fb_show_logo) from [<c026c1e4>] (fbcon_switch+0x3fc/0x46c) [ 1.254842] r10:c6a3e824 r9:c6a3e800 r8:00000000 r7:c6a0c000 r6:c070b014 r5:c6a3e800 [ 1.254852] r4:c6808c00 [ 1.254889] [<c026bde8>] (fbcon_switch) from [<c029c8f8>] (redraw_screen+0xf0/0x1e8) [ 1.254918] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c070d5a0 r5:00000080 [ 1.254928] r4:c6808c00 [ 1.254961] [<c029c808>] (redraw_screen) from [<c029d264>] (do_bind_con_driver+0x194/0x2e4) [ 1.254991] r9:00000000 r8:00000000 r7:00000014 r6:c070d5a0 r5:c070d5a0 r4:c070d5a0

So prevent displaying a logo bigger than screen size and avoid invalid memory access.

Signed-off-by: Manfred Schlaegl manfred.schlaegl@ginzinger.com Signed-off-by: Martin Kepplinger martin.kepplinger@ginzinger.com Cc: Daniel Vetter daniel.vetter@ffwll.ch Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/core/fbmem.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index ea2bd6208a2f..9eae191728d2 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -425,6 +425,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image, { unsigned int x;

+ if (image->width > info->var.xres || image->height > info->var.yres) + return; + if (rotate == FB_ROTATE_UR) { for (x = 0; x < num && image->dx + image->width <= info->var.xres;

[ Upstream commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61 ]

I'm seeing series of e1000e resets (sometimes endless) at system boot if something generates tx traffic at this time. In my case this is netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames" from e1000e itself. As result e1000_watchdog_task sees used tx buffer while carrier is off and start this reset cycle again.

[ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000 [ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 27.174495] 8021q: 802.1Q VLAN Support v1.8 [ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1 [ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 30.898564] netpoll: netconsole: local port 6666 [ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8 [ 30.898567] netpoll: netconsole: interface 'eth1' [ 30.898568] netpoll: netconsole: remote port 6666 [ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790 [ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0 [ 30.917747] console [netcon0] enabled [ 30.917749] netconsole: network logging started [ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

This patch flushes tx buffers only once when carrier is off rather than at each watchdog iteration.

Signed-off-by: Konstantin Khlebnikov khlebnikov@yandex-team.ru Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e1000e/netdev.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 6b1cacd86c6e..44312962b64e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5246,8 +5246,13 @@ static void e1000_watchdog_task(struct work_struct *work) /* 8000ES2LAN requires a Rx packet buffer work-around * on link down event; reset the controller to flush * the Rx packet buffer. + * + * If the link is lost the controller stops DMA, but + * if there is queued Tx work it cannot be done. So + * reset the controller to flush the Tx packet buffers. */ - if (adapter->flags & FLAG_RX_NEEDS_RESTART) + if ((adapter->flags & FLAG_RX_NEEDS_RESTART) || + e1000_desc_unused(tx_ring) + 1 < tx_ring->count) adapter->flags |= FLAG_RESTART_NOW; else pm_schedule_suspend(netdev->dev.parent, @@ -5270,14 +5275,6 @@ link_up: adapter->gotc_old = adapter->stats.gotc; spin_unlock(&adapter->stats64_lock);

- /* If the link is lost the controller stops DMA, but - * if there is queued Tx work it cannot be done. So - * reset the controller to flush the Tx packet buffers. - */ - if (!netif_carrier_ok(netdev) && - (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) - adapter->flags |= FLAG_RESTART_NOW; - /* If reset is necessary, do it outside of interrupt context. */ if (adapter->flags & FLAG_RESTART_NOW) { schedule_work(&adapter->reset_task);

[ Upstream commit 8cd09a3dd3e176c62da67efcd477a44a8d87185e ]

If of_platform_populate() fails in gsbi_probe(), gsbi->hclk is left undisabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov khoroshilov@ispras.ru Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Andy Gross andy.gross@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/qcom/qcom_gsbi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c index 09c669e70d63..038abc377fdb 100644 --- a/drivers/soc/qcom/qcom_gsbi.c +++ b/drivers/soc/qcom/qcom_gsbi.c @@ -138,7 +138,7 @@ static int gsbi_probe(struct platform_device *pdev) struct resource *res; void __iomem *base; struct gsbi_info *gsbi; - int i; + int i, ret; u32 mask, gsbi_num; const struct crci_config *config = NULL;

@@ -221,7 +221,10 @@ static int gsbi_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, gsbi);

- return of_platform_populate(node, NULL, NULL, &pdev->dev); + ret = of_platform_populate(node, NULL, NULL, &pdev->dev); + if (ret) + clk_disable_unprepare(gsbi->hclk); + return ret; }

static int gsbi_remove(struct platform_device *pdev)

[ Upstream commit 5388a5b82199facacd3d7ac0d05aca6e8f902fed ]

machine_crash_nonpanic_core() does this:

while (1) cpu_relax();

because the kernel has crashed, and we have no known safe way to deal with the CPU. So, we place the CPU into an infinite loop which we expect it to never exit - at least not until the system as a whole is reset by some method.

In the absence of erratum 754327, this code assembles to:

b .

In other words, an infinite loop. When erratum 754327 is enabled, this becomes:

1: dmb b 1b

It has been observed that on some systems (eg, OMAP4) where, if a crash is triggered, the system tries to kexec into the panic kernel, but fails after taking the secondary CPU down - placing it into one of these loops. This causes the system to livelock, and the most noticable effect is the system stops after issuing:

Loading crashdump kernel...

to the system console.

The tested as working solution I came up with was to add wfe() to these infinite loops thusly:

while (1) { cpu_relax(); wfe(); }

which, without 754327 builds to:

1: wfe b 1b

or with 754327 is enabled:

1: dmb wfe b 1b

Adding "wfe" does two things depending on the environment we're running under: - where we're running on bare metal, and the processor implements "wfe", it stops us spinning endlessly in a loop where we're never going to do any useful work. - if we're running in a VM, it allows the CPU to be given back to the hypervisor and rescheduled for other purposes (maybe a different VM) rather than wasting CPU cycles inside a crashed VM.

However, in light of erratum 794072, Will Deacon wanted to see 10 nops as well - which is reasonable to cover the case where we have erratum 754327 enabled _and_ we have a processor that doesn't implement the wfe hint.

So, we now end up with:

1: wfe b 1b

when erratum 754327 is disabled, or:

1: dmb nop nop nop nop nop nop nop nop nop nop wfe b 1b

when erratum 754327 is enabled. We also get the dmb + 10 nop sequence elsewhere in the kernel, in terminating loops.

This is reasonable - it means we get the workaround for erratum 794072 when erratum 754327 is enabled, but still relinquish the dead processor - either by placing it in a lower power mode when wfe is implemented as such or by returning it to the hypervisior, or in the case where wfe is a no-op, we use the workaround specified in erratum 794072 to avoid the problem.

These as two entirely orthogonal problems - the 10 nops addresses erratum 794072, and the wfe is an optimisation that makes the system more efficient when crashed either in terms of power consumption or by allowing the host/other VMs to make use of the CPU.

I don't see any reason not to use kexec() inside a VM - it has the potential to provide automated recovery from a failure of the VMs kernel with the opportunity for saving a crashdump of the failure. A panic() with a reboot timeout won't do that, and reading the libvirt documentation, setting on_reboot to "preserve" won't either (the documentation states "The preserve action for an on_reboot event is treated as a destroy".) Surely it has to be a good thing to avoiding having CPUs spinning inside a VM that is doing no useful work.

Acked-by: Will Deacon will.deacon@arm.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/include/asm/barrier.h | 2 ++ arch/arm/include/asm/processor.h | 6 +++++- arch/arm/kernel/machine_kexec.c | 5 ++++- arch/arm/kernel/smp.c | 4 +++- arch/arm/mach-omap2/prm_common.c | 4 +++- 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 3ff5642d9788..27c1d26b05b5 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -10,6 +10,8 @@ #define sev() __asm__ __volatile__ ("sev" : : : "memory") #define wfe() __asm__ __volatile__ ("wfe" : : : "memory") #define wfi() __asm__ __volatile__ ("wfi" : : : "memory") +#else +#define wfe() do { } while (0) #endif

#if __LINUX_ARM_ARCH__ >= 7 diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 8a1e8e995dae..08509183c7df 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -77,7 +77,11 @@ extern void release_thread(struct task_struct *); unsigned long get_wchan(struct task_struct *p);

#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327) -#define cpu_relax() smp_mb() +#define cpu_relax() \ + do { \ + smp_mb(); \ + __asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \ + } while (0) #else #define cpu_relax() barrier() #endif diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 8bf3b7c09888..46519916a465 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -87,8 +87,11 @@ void machine_crash_nonpanic_core(void *unused)

set_cpu_online(smp_processor_id(), false); atomic_dec(&waiting_for_crash_ipi); - while (1) + + while (1) { cpu_relax(); + wfe(); + } }

static void machine_kexec_mask_interrupts(void) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 08ce9e36dc5a..0f1c11861147 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -563,8 +563,10 @@ static void ipi_cpu_stop(unsigned int cpu) local_fiq_disable(); local_irq_disable();

- while (1) + while (1) { cpu_relax(); + wfe(); + } }

static DEFINE_PER_CPU(struct completion *, cpu_completion); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 0ce4548ef7f0..4b9e9d1d8229 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -533,8 +533,10 @@ void omap_prm_reset_system(void)

prm_ll_data->reset_system();

- while (1) + while (1) { cpu_relax(); + wfe(); + } }

/**

[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ]

This driver sets initial frame width and height to 0x0, which is invalid. So set it to selection rectangle bounds instead.

This is detected by v4l2-compliance detected.

Cc: Enrico Scholz enrico.scholz@sigma-chemnitz.de Cc: Michael Grzeschik m.grzeschik@pengutronix.de Cc: Marco Felsch m.felsch@pengutronix.de Signed-off-by: Akinobu Mita akinobu.mita@gmail.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/soc_camera/mt9m111.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/media/i2c/soc_camera/mt9m111.c b/drivers/media/i2c/soc_camera/mt9m111.c index 6dfaead6aaa8..1d1ca03c797f 100644 --- a/drivers/media/i2c/soc_camera/mt9m111.c +++ b/drivers/media/i2c/soc_camera/mt9m111.c @@ -988,6 +988,8 @@ static int mt9m111_probe(struct i2c_client *client, mt9m111->rect.top = MT9M111_MIN_DARK_ROWS; mt9m111->rect.width = MT9M111_MAX_WIDTH; mt9m111->rect.height = MT9M111_MAX_HEIGHT; + mt9m111->width = mt9m111->rect.width; + mt9m111->height = mt9m111->rect.height; mt9m111->fmt = &mt9m111_colour_fmts[0]; mt9m111->lastpage = -1; mutex_init(&mt9m111->power_lock);

[ Upstream commit 51294bf6b9e897d595466dcda5a3f2751906a200 ]

On cases where device tree entries for fuse and clock provider are in different order, fuse driver needs to defer probing. This leads to freeing incorrect IO base address as the fuse->base variable gets overwritten once during first probe invocation. This leads to the following spew during boot:

[ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94) [ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8 [ 3.082318] Modules linked in: [ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1 [ 3.082340] Hardware name: quill (DT) [ 3.082353] Workqueue: events deferred_probe_work_func [ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO) [ 3.082372] pc : __vunmap+0xcc/0xd8 [ 3.082379] lr : __vunmap+0xcc/0xd8 [ 3.082385] sp : ffff00000a1d3b60 [ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000 [ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610 [ 3.082413] x25: 0000000000000000 x24: 0000000000000009 [ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000 [ 3.082432] x21: 0000000000000000 x20: 0000000000000000 [ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff [ 3.082452] x17: 0000000000000000 x16: 0000000000000000 [ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720 [ 3.082471] x13: 0720072007200720 x12: 0720072907340739 [ 3.082481] x11: 0764076607380765 x10: 0766076307300730 [ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720 [ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102 [ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8 [ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000 [ 3.082538] Call trace: [ 3.082545] __vunmap+0xcc/0xd8 [ 3.082552] vunmap+0x24/0x30 [ 3.082561] __iounmap+0x2c/0x38 [ 3.082569] tegra_fuse_probe+0xc8/0x118 [ 3.082577] platform_drv_probe+0x50/0xa0 [ 3.082585] really_probe+0x1b0/0x288 [ 3.082593] driver_probe_device+0x58/0x100 [ 3.082601] __device_attach_driver+0x98/0xf0 [ 3.082609] bus_for_each_drv+0x64/0xc8 [ 3.082616] __device_attach+0xd8/0x130 [ 3.082624] device_initial_probe+0x10/0x18 [ 3.082631] bus_probe_device+0x90/0x98 [ 3.082638] deferred_probe_work_func+0x74/0xb0 [ 3.082649] process_one_work+0x1e0/0x318 [ 3.082656] worker_thread+0x228/0x450 [ 3.082664] kthread+0x128/0x130 [ 3.082672] ret_from_fork+0x10/0x18 [ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]---

Fix this by retaining the value of fuse->base until driver has successfully probed.

Signed-off-by: Timo Alho talho@nvidia.com Acked-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/tegra/fuse/fuse-tegra.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c index de2c1bfe28b5..c4f5e5bbb8dc 100644 --- a/drivers/soc/tegra/fuse/fuse-tegra.c +++ b/drivers/soc/tegra/fuse/fuse-tegra.c @@ -131,13 +131,17 @@ static int tegra_fuse_probe(struct platform_device *pdev) /* take over the memory region from the early initialization */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); fuse->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(fuse->base)) - return PTR_ERR(fuse->base); + if (IS_ERR(fuse->base)) { + err = PTR_ERR(fuse->base); + fuse->base = base; + return err; + }

fuse->clk = devm_clk_get(&pdev->dev, "fuse"); if (IS_ERR(fuse->clk)) { dev_err(&pdev->dev, "failed to get FUSE clock: %ld", PTR_ERR(fuse->clk)); + fuse->base = base; return PTR_ERR(fuse->clk); }

@@ -146,8 +150,10 @@ static int tegra_fuse_probe(struct platform_device *pdev)

if (fuse->soc->probe) { err = fuse->soc->probe(fuse); - if (err < 0) + if (err < 0) { + fuse->base = base; return err; + } }

if (tegra_fuse_create_sysfs(&pdev->dev, fuse->soc->info->size,

[ Upstream commit 9227ab5643cb8350449502dd9e3168a873ab0e3b ]

The warning got introduced by commit 930507c18304 ("arm64: add basic Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning haven't been seen before since size_t was 'unsigned int' when built on arm32.

../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’: ../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) ^~ ../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’ (__typecheck(x, y) && __no_side_effects(x, y)) ^~~~~~~~~~~ ../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’ __builtin_choose_expr(__safe_cmp(x, y), \ ^~~~~~~~~~ ../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’ #define min(x, y) __careful_cmp(x, y, <) ^~~~~~~~~~~~~ ../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’ now = min(d->len, sg_dma_len(sg)); ^~~

Rework so that we use min_t and pass in the size_t that returns the minimum of two values, using the specified type.

Signed-off-by: Anders Roxell anders.roxell@linaro.org Acked-by: Olof Johansson olof@lixom.net Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/imx-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index dfa337ae06fc..529b315a6683 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -286,7 +286,7 @@ static inline int imxdma_sg_next(struct imxdma_desc *d) struct scatterlist *sg = d->sg; unsigned long now;

- now = min(d->len, sg_dma_len(sg)); + now = min_t(size_t, d->len, sg_dma_len(sg)); if (d->len != IMX_DMA_LENGTH_LOOP) d->len -= now;

[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]

Previously when doing format enumeration, it was returning all formats supported by driver, even if they're not supported by hw. Add missing check for fmt_ver_flag, so it'll be fixed and only those supported by hw will be returned. Similar thing is already done in s5p_jpeg_find_format.

It was found by using v4l2-compliance tool and checking result of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test and using v4l2-ctl to get list of all supported formats.

Tested on s5pv210-galaxys (Samsung i9000 phone).

Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver")

Signed-off-by: Pawe? Chmiel pawel.mikolaj.chmiel@gmail.com Reviewed-by: Jacek Anaszewski jacek.anaszewski@gmail.com [hverkuil-cisco@xs4all.nl: fix a few alignment issues] Signed-off-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/s5p-jpeg/jpeg-core.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c index 80c83bba7af3..0d981bbf38bc 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c @@ -1262,13 +1262,16 @@ static int s5p_jpeg_querycap(struct file *file, void *priv, return 0; }

-static int enum_fmt(struct s5p_jpeg_fmt *sjpeg_formats, int n, +static int enum_fmt(struct s5p_jpeg_ctx *ctx, + struct s5p_jpeg_fmt *sjpeg_formats, int n, struct v4l2_fmtdesc *f, u32 type) { int i, num = 0; + unsigned int fmt_ver_flag = ctx->jpeg->variant->fmt_ver_flag;

for (i = 0; i < n; ++i) { - if (sjpeg_formats[i].flags & type) { + if (sjpeg_formats[i].flags & type && + sjpeg_formats[i].flags & fmt_ver_flag) { /* index-th format of type type found ? */ if (num == f->index) break; @@ -1294,11 +1297,11 @@ static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv, struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);

if (ctx->mode == S5P_JPEG_ENCODE) - return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f, + return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f, SJPEG_FMT_FLAG_ENC_CAPTURE);

- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f, - SJPEG_FMT_FLAG_DEC_CAPTURE); + return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f, + SJPEG_FMT_FLAG_DEC_CAPTURE); }

static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv, @@ -1307,11 +1310,11 @@ static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv, struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);

if (ctx->mode == S5P_JPEG_ENCODE) - return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f, + return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f, SJPEG_FMT_FLAG_ENC_OUTPUT);

- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f, - SJPEG_FMT_FLAG_DEC_OUTPUT); + return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f, + SJPEG_FMT_FLAG_DEC_OUTPUT); }

static struct s5p_jpeg_q_data *get_q_data(struct s5p_jpeg_ctx *ctx,

[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]

Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware failed instead of meaningless goto out to avoid the following memory leak reports(Only the last one listed):

unreferenced object 0xc28a9a00 (size 512): comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<6624adab>] kmemleak_alloc+0x40/0x74 [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270 [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore] [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore] [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211] [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211] [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211] [<7e1d425a>] process_one_work+0x284/0x42c [<55f9432e>] worker_thread+0x2fc/0x48c [<abb582c6>] kthread+0x148/0x160 [<63144b13>] ret_from_fork+0x14/0x2c [< (null)>] (null) [<1f6e7715>] 0xffffffff

Signed-off-by: Zumeng Chen zumeng.chen@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ti/wlcore/main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 7b27c7e23af2..cc10b72607c6 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1123,8 +1123,11 @@ static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt) goto out;

ret = wl12xx_fetch_firmware(wl, plt); - if (ret < 0) - goto out; + if (ret < 0) { + kfree(wl->fw_status); + kfree(wl->raw_fw_status); + kfree(wl->tx_res_if); + }

out: return ret;

[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ]

The dma_desc->bytes_transferred counter tracks the number of bytes moved by the DMA channel. This is then used to calculate the information passed back in the in the tegra_dma_tx_status callback, which is usually fine.

When the DMA channel is configured as continous, then the bytes_transferred counter will increase over time and eventually overflow to become negative so the residue count will become invalid and the ALSA sound-dma code will report invalid hardware pointer values to the application. This results in some users becoming confused about the playout position and putting audio data in the wrong place.

To fix this issue, always ensure the bytes_transferred field is modulo the size of the request. We only do this for the case of the cyclic transfer done ISR as anyone attempting to move 2GiB of DMA data in one transfer is unlikely.

Note, we don't fix the issue that we should /never/ transfer a negative number of bytes so we could make those fields unsigned.

Reviewed-by: Dmitry Osipenko digetx@gmail.com Signed-off-by: Ben Dooks ben.dooks@codethink.co.uk Acked-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/tegra20-apb-dma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index c8f79dcaaee8..67f201b8dcda 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -632,7 +632,10 @@ static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,

sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq), node); dma_desc = sgreq->dma_desc; - dma_desc->bytes_transferred += sgreq->req_len; + /* if we dma for long enough the transfer count will wrap */ + dma_desc->bytes_transferred = + (dma_desc->bytes_transferred + sgreq->req_len) % + dma_desc->bytes_requested;

/* Callback need to be call */ if (!dma_desc->cb_count)

From: Linus Torvalds torvalds@linux-foundation.org

commit 9f834ec18defc369d73ccf9e87a2790bfa05bf46 upstream.

We used to delay switching to the new credentials until after we had mapped the executable (and possible elf interpreter). That was kind of odd to begin with, since the new executable will actually then _run_ with the new creds, but whatever.

The bigger problem was that we also want to make sure that we turn off prof events and tracing before we start mapping the new executable state. So while this is a cleanup, it's also a fix for a possible information leak.

Reported-by: Robert Święcki robert@swiecki.net Tested-by: Peter Zijlstra peterz@infradead.org Acked-by: David Howells dhowells@redhat.com Acked-by: Oleg Nesterov oleg@redhat.com Acked-by: Andy Lutomirski luto@amacapital.net Acked-by: Eric W. Biederman ebiederm@xmission.com Cc: Willy Tarreau w@1wt.eu Cc: Kees Cook keescook@chromium.org Cc: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Cc: Federico Manuel Bento up201407890@fc.up.pt Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/binfmt_elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -850,6 +850,7 @@ static int load_elf_binary(struct linux_ current->flags |= PF_RANDOMIZE;

setup_new_exec(bprm); + install_exec_creds(bprm);

/* Do this so that we can load the interpreter, if need be. We will change some of these later */ @@ -1084,7 +1085,6 @@ static int load_elf_binary(struct linux_ goto out; #endif /* ARCH_HAS_SETUP_ADDITIONAL_PAGES */

- install_exec_creds(bprm); retval = create_elf_tables(bprm, &loc->elf_ex, load_addr, interp_load_addr); if (retval < 0)

commit 927185c124d62a9a4d35878d7f6d432a166b74e3 upstream.

The kernel uses the OUTPUT_FORMAT linker script command in it's linker scripts. Most of the time, the -m option is passed to the linker with correct architecture, but sometimes (at least for x86_64) the -m option contradicts the OUTPUT_FORMAT directive.

Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object files, but are linked with the -m elf_x86_64 linker flag when building for x86_64.

The GNU linker manpage doesn't explicitly state any tie-breakers between -m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT overrides the emulation value specified with the -m option.

LLVM lld has a different behavior, however. When supplied with contradicting -m and OUTPUT_FORMAT values it fails with the following error message:

ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64

Therefore, just add the correct -m after the incorrect one (it overrides it), so the linker invocation looks like this:

ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \ realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf

This is not a functional change for GNU ld, because (although not explicitly documented) OUTPUT_FORMAT overrides -m EMULATION.

Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting it in QEMU.

[ bp: massage and clarify text. ]

Suggested-by: Dmitry Golovin dima@golovin.in Signed-off-by: George Rimar grimar@accesssoftek.com Signed-off-by: Tri Vo trong@android.com Signed-off-by: Borislav Petkov bp@suse.de Tested-by: Tri Vo trong@android.com Tested-by: Nick Desaulniers ndesaulniers@google.com Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: Michael Matz matz@suse.de Cc: Thomas Gleixner tglx@linutronix.de Cc: morbo@google.com Cc: ndesaulniers@google.com Cc: ruiu@google.com Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20190111201012.71210-1-trong@android.com [nc: Fix conflicts due to lack of commit 58ab5e0c2c40 ("Kbuild: arch: look for generated headers in obtree") in this tree] Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/boot/Makefile | 2 +- arch/x86/realmode/rm/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 6da2cd0897f3..e94745321cac 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -100,7 +100,7 @@ $(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE AFLAGS_header.o += -I$(obj) $(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h

-LDFLAGS_setup.elf := -T +LDFLAGS_setup.elf := -m elf_i386 -T $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE $(call if_changed,ld)

diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index 2730d775ef9a..228cb16962ba 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -43,7 +43,7 @@ $(obj)/pasyms.h: $(REALMODE_OBJS) FORCE targets += realmode.lds $(obj)/realmode.lds: $(obj)/pasyms.h

-LDFLAGS_realmode.elf := --emit-relocs -T +LDFLAGS_realmode.elf := -m elf_i386 --emit-relocs -T CPPFLAGS_realmode.lds += -P -C -I$(obj)

targets += realmode.elf

commit ac3e233d29f7f77f28243af0132057d378d3ea58 upstream.

GNU linker's -z common-page-size's default value is based on the target architecture. arch/x86/entry/vdso/Makefile sets it to the architecture default, which is implicit and redundant. Drop it.

Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Reported-by: Dmitry Golovin dima@golovin.in Reported-by: Bill Wendling morbo@google.com Suggested-by: Dmitry Golovin dima@golovin.in Suggested-by: Rui Ueyama ruiu@google.com Signed-off-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Andy Lutomirski luto@kernel.org Cc: Andi Kleen andi@firstfloor.org Cc: Fangrui Song maskray@google.com Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=38774 Link: https://github.com/ClangBuiltLinux/linux/issues/31 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/entry/vdso/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile index 84c4a7105c2a..297dda4d5947 100644 --- a/arch/x86/entry/vdso/Makefile +++ b/arch/x86/entry/vdso/Makefile @@ -42,7 +42,7 @@ targets += $(vdso_img_sodbg) export CPPFLAGS_vdso.lds += -P -C

VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -soname linux-vdso.so.1 --no-undefined \ - -z max-page-size=4096 -z common-page-size=4096 + -z max-page-size=4096

$(obj)/vdso64.so.dbg: $(src)/vdso.lds $(vobjs) FORCE $(call if_changed,vdso) @@ -89,7 +89,7 @@ CFLAGS_REMOVE_vvar.o = -pg

CPPFLAGS_vdsox32.lds = $(CPPFLAGS_vdso.lds) VDSO_LDFLAGS_vdsox32.lds = -m elf32_x86_64 -soname linux-vdso.so.1 \ - -z max-page-size=4096 -z common-page-size=4096 + -z max-page-size=4096

# 64-bit objects to re-brand as x32 vobjs64-for-x32 := $(filter-out $(vobjs-nox32),$(vobjs-y))

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit c7084edc3f6d67750f50d4183134c4fb5712a5c8 upstream.

The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place.

After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things.

Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won.

Reported-by: Jann Horn jannh@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org

--- drivers/char/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -389,7 +389,7 @@ config XILINX_HWICAP

config R3964 tristate "Siemens R3964 line discipline" - depends on TTY + depends on TTY && BROKEN ---help--- This driver allows synchronous communication with devices using the Siemens R3964 packet protocol. Unless you are dealing with special

From: Junwei Hu hujunwei4@huawei.com

[ Upstream commit ef0efcd3bd3fd0589732b67fb586ffd3c8705806 ]

At the beginning of ip6_fragment func, the prevhdr pointer is obtained in the ip6_find_1stfragopt func. However, all the pointers pointing into skb header may change when calling skb_checksum_help func with skb->ip_summed = CHECKSUM_PARTIAL condition. The prevhdr pointe will be dangling if it is not reloaded after calling __skb_linearize func in skb_checksum_help func.

Here, I add a variable, nexthdr_offset, to evaluate the offset, which does not changes even after calling __skb_linearize func.

Fixes: 405c92f7a541 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment") Signed-off-by: Junwei Hu hujunwei4@huawei.com Reported-by: Wenhao Zhang zhangwenhao8@huawei.com Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com Reviewed-by: Zhiqiang Liu liuzhiqiang26@huawei.com Acked-by: Martin KaFai Lau kafai@fb.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv6/ip6_output.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -575,7 +575,7 @@ int ip6_fragment(struct net *net, struct inet6_sk(skb->sk) : NULL; struct ipv6hdr *tmp_hdr; struct frag_hdr *fh; - unsigned int mtu, hlen, left, len; + unsigned int mtu, hlen, left, len, nexthdr_offset; int hroom, troom; __be32 frag_id; int ptr, offset = 0, err = 0; @@ -586,6 +586,7 @@ int ip6_fragment(struct net *net, struct goto fail; hlen = err; nexthdr = *prevhdr; + nexthdr_offset = prevhdr - skb_network_header(skb);

mtu = ip6_skb_dst_mtu(skb);

@@ -620,6 +621,7 @@ int ip6_fragment(struct net *net, struct (err = skb_checksum_help(skb))) goto fail;

+ prevhdr = skb_network_header(skb) + nexthdr_offset; hroom = LL_RESERVED_SPACE(rt->dst.dev); if (skb_has_frag_list(skb)) { int first_len = skb_pagelen(skb);

From: Mao Wenan maowenan@huawei.com

[ Upstream commit cb66ddd156203daefb8d71158036b27b0e2caf63 ]

When it is to cleanup net namespace, rds_tcp_exit_net() will call rds_tcp_kill_sock(), if t_sock is NULL, it will not call rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect() and reference 'net' which has already been freed.

In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before sock->ops->connect, but if connect() is failed, it will call rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always failed, rds_connect_worker() will try to reconnect all the time, so rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the connections.

Therefore, the condition !tc->t_sock is not needed if it is going to do cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always NULL, and there is on other path to cancel cp_conn_w and free connection. So this patch is to fix this.

rds_tcp_kill_sock(): ... if (net != c_net || !tc->t_sock) ... Acked-by: Santosh Shilimkar santosh.shilimkar@oracle.com

================================================================== BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721

CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11 Hardware name: linux,dummy-virt (DT) Workqueue: krdsd rds_connect_worker Call trace: dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x120/0x188 lib/dump_stack.c:113 print_address_description+0x68/0x278 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x21c/0x348 mm/kasan/report.c:409 __asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429 inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 __sock_create+0x4f8/0x770 net/socket.c:1276 sock_create_kern+0x50/0x68 net/socket.c:1322 rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114 rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117

Allocated by task 687: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553 kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2705 [inline] slab_alloc mm/slub.c:2713 [inline] kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718 kmem_cache_zalloc include/linux/slab.h:697 [inline] net_alloc net/core/net_namespace.c:384 [inline] copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424 create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206 ksys_unshare+0x340/0x628 kernel/fork.c:2577 __do_sys_unshare kernel/fork.c:2645 [inline] __se_sys_unshare kernel/fork.c:2643 [inline] __arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960

Freed by task 264: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521 kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528 slab_free_hook mm/slub.c:1370 [inline] slab_free_freelist_hook mm/slub.c:1397 [inline] slab_free mm/slub.c:2952 [inline] kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968 net_free net/core/net_namespace.c:400 [inline] net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407 net_drop_ns net/core/net_namespace.c:406 [inline] cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117

The buggy address belongs to the object at ffff8003496a3f80 which belongs to the cache net_namespace of size 7872 The buggy address is located 1796 bytes inside of 7872-byte region [ffff8003496a3f80, ffff8003496a5e40) The buggy address belongs to the page: page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000 index:0x0 compound_mapcount: 0 flags: 0xffffe0000008100(slab|head) raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000 raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected

Memory state around the buggy address: ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

^ ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ==================================================================

Fixes: 467fa15356ac("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Mao Wenan maowenan@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/rds/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/rds/tcp.c +++ b/net/rds/tcp.c @@ -346,7 +346,7 @@ static void rds_tcp_kill_sock(struct net list_for_each_entry_safe(tc, _tc, &rds_tcp_conn_list, t_tcp_node) { struct net *c_net = read_pnet(&tc->conn->c_net);

- if (net != c_net || !tc->t_sock) + if (net != c_net) continue; list_move_tail(&tc->t_tcp_node, &tmp_list); }

From: Bjørn Mork bjorn@mork.no

[ Upstream commit 6289d0facd9ebce4cc83e5da39e15643ee998dc5 ]

This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message.

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Signed-off-by: Bjørn Mork bjorn@mork.no Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -717,6 +717,7 @@ static const struct usb_device_id produc {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */ {QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */ {QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */ + {QMI_FIXED_INTF(0x2020, 0x2031, 4)}, /* Olicard 600 */ {QMI_FIXED_INTF(0x2020, 0x2033, 4)}, /* BroadMobi BM806U */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */

From: Koen De Schepper koen.de_schepper@nokia-bell-labs.com

[ Upstream commit aecfde23108b8e637d9f5c5e523b24fb97035dc3 ]

RFC8257 §3.5 explicitly states that "A DCTCP sender MUST react to loss episodes in the same way as conventional TCP".

Currently, Linux DCTCP performs no cwnd reduction when losses are encountered. Optionally, the dctcp_clamp_alpha_on_loss resets alpha to its maximal value if a RTO happens. This behavior is sub-optimal for at least two reasons: i) it ignores losses triggering fast retransmissions; and ii) it causes unnecessary large cwnd reduction in the future if the loss was isolated as it resets the historical term of DCTCP's alpha EWMA to its maximal value (i.e., denoting a total congestion). The second reason has an especially noticeable effect when using DCTCP in high BDP environments, where alpha normally stays at low values.

This patch replace the clamping of alpha by setting ssthresh to half of cwnd for both fast retransmissions and RTOs, at most once per RTT. Consequently, the dctcp_clamp_alpha_on_loss module parameter has been removed.

The table below shows experimental results where we measured the drop probability of a PIE AQM (not applying ECN marks) at a bottleneck in the presence of a single TCP flow with either the alpha-clamping option enabled or the cwnd halving proposed by this patch. Results using reno or cubic are given for comparison.

| Link | RTT | Drop TCP CC | speed | base+AQM | probability ==================|=========|==========|============ CUBIC | 40Mbps | 7+20ms | 0.21% RENO | | | 0.19% DCTCP-CLAMP-ALPHA | | | 25.80% DCTCP-HALVE-CWND | | | 0.22% ------------------|---------|----------|------------ CUBIC | 100Mbps | 7+20ms | 0.03% RENO | | | 0.02% DCTCP-CLAMP-ALPHA | | | 23.30% DCTCP-HALVE-CWND | | | 0.04% ------------------|---------|----------|------------ CUBIC | 800Mbps | 1+1ms | 0.04% RENO | | | 0.05% DCTCP-CLAMP-ALPHA | | | 18.70% DCTCP-HALVE-CWND | | | 0.06%

We see that, without halving its cwnd for all source of losses, DCTCP drives the AQM to large drop probabilities in order to keep the queue length under control (i.e., it repeatedly faces RTOs). Instead, if DCTCP reacts to all source of losses, it can then be controlled by the AQM using similar drop levels than cubic or reno.

Signed-off-by: Koen De Schepper koen.de_schepper@nokia-bell-labs.com Signed-off-by: Olivier Tilmans olivier.tilmans@nokia-bell-labs.com Cc: Bob Briscoe research@bobbriscoe.net Cc: Lawrence Brakmo brakmo@fb.com Cc: Florian Westphal fw@strlen.de Cc: Daniel Borkmann borkmann@iogearbox.net Cc: Yuchung Cheng ycheng@google.com Cc: Neal Cardwell ncardwell@google.com Cc: Eric Dumazet edumazet@google.com Cc: Andrew Shewmaker agshew@gmail.com Cc: Glenn Judd glenn.judd@morganstanley.com Acked-by: Florian Westphal fw@strlen.de Acked-by: Neal Cardwell ncardwell@google.com Acked-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp_dctcp.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)

--- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -66,11 +66,6 @@ static unsigned int dctcp_alpha_on_init module_param(dctcp_alpha_on_init, uint, 0644); MODULE_PARM_DESC(dctcp_alpha_on_init, "parameter for initial alpha value");

-static unsigned int dctcp_clamp_alpha_on_loss __read_mostly; -module_param(dctcp_clamp_alpha_on_loss, uint, 0644); -MODULE_PARM_DESC(dctcp_clamp_alpha_on_loss, - "parameter for clamping alpha on loss"); - static struct tcp_congestion_ops dctcp_reno;

static void dctcp_reset(const struct tcp_sock *tp, struct dctcp *ca) @@ -211,21 +206,23 @@ static void dctcp_update_alpha(struct so } }

-static void dctcp_state(struct sock *sk, u8 new_state) +static void dctcp_react_to_loss(struct sock *sk) { - if (dctcp_clamp_alpha_on_loss && new_state == TCP_CA_Loss) { - struct dctcp *ca = inet_csk_ca(sk); + struct dctcp *ca = inet_csk_ca(sk); + struct tcp_sock *tp = tcp_sk(sk);

- /* If this extension is enabled, we clamp dctcp_alpha to - * max on packet loss; the motivation is that dctcp_alpha - * is an indicator to the extend of congestion and packet - * loss is an indicator of extreme congestion; setting - * this in practice turned out to be beneficial, and - * effectively assumes total congestion which reduces the - * window by half. - */ - ca->dctcp_alpha = DCTCP_MAX_ALPHA; - } + ca->loss_cwnd = tp->snd_cwnd; + tp->snd_ssthresh = max(tp->snd_cwnd >> 1U, 2U); +} + +static void dctcp_state(struct sock *sk, u8 new_state) +{ + if (new_state == TCP_CA_Recovery && + new_state != inet_csk(sk)->icsk_ca_state) + dctcp_react_to_loss(sk); + /* We handle RTO in dctcp_cwnd_event to ensure that we perform only + * one loss-adjustment per RTT. + */ }

static void dctcp_cwnd_event(struct sock *sk, enum tcp_ca_event ev) @@ -237,6 +234,9 @@ static void dctcp_cwnd_event(struct sock case CA_EVENT_ECN_NO_CE: dctcp_ce_state_1_to_0(sk); break; + case CA_EVENT_LOSS: + dctcp_react_to_loss(sk); + break; default: /* Don't care for the rest. */ break;

From: Li RongQing lirongqing@baidu.com

[ Upstream commit 3d8830266ffc28c16032b859e38a0252e014b631 ]

NULL or ZERO_SIZE_PTR will be returned for zero sized memory request, and derefencing them will lead to a segfault

so it is unnecessory to call vzalloc for zero sized memory request and not call functions which maybe derefence the NULL allocated memory

this also fixes a possible memory leak if phy_ethtool_get_stats returns error, memory should be freed before exit

Signed-off-by: Li RongQing lirongqing@baidu.com Reviewed-by: Wang Li wangli39@baidu.com Reviewed-by: Michal Kubecek mkubecek@suse.cz Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/ethtool.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-)

--- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -1287,17 +1287,22 @@ static int ethtool_get_strings(struct ne

gstrings.len = ret;

- data = kcalloc(gstrings.len, ETH_GSTRING_LEN, GFP_USER); - if (!data) - return -ENOMEM; + if (gstrings.len) { + data = kcalloc(gstrings.len, ETH_GSTRING_LEN, GFP_USER); + if (!data) + return -ENOMEM;

- __ethtool_get_strings(dev, gstrings.string_set, data); + __ethtool_get_strings(dev, gstrings.string_set, data); + } else { + data = NULL; + }

ret = -EFAULT; if (copy_to_user(useraddr, &gstrings, sizeof(gstrings))) goto out; useraddr += sizeof(gstrings); - if (copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN)) + if (gstrings.len && + copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN)) goto out; ret = 0;

@@ -1385,17 +1390,21 @@ static int ethtool_get_stats(struct net_ return -EFAULT;

stats.n_stats = n_stats; - data = kmalloc(n_stats * sizeof(u64), GFP_USER); - if (!data) - return -ENOMEM; + if (n_stats) { + data = kmalloc(n_stats * sizeof(u64), GFP_USER); + if (!data) + return -ENOMEM;

- ops->get_ethtool_stats(dev, &stats, data); + ops->get_ethtool_stats(dev, &stats, data); + } else { + data = NULL; + }

ret = -EFAULT; if (copy_to_user(useraddr, &stats, sizeof(stats))) goto out; useraddr += sizeof(stats); - if (copy_to_user(useraddr, data, stats.n_stats * sizeof(u64))) + if (n_stats && copy_to_user(useraddr, data, n_stats * sizeof(u64))) goto out; ret = 0;

From: Zubin Mithra zsm@chromium.org

commit 212ac181c158c09038c474ba68068be49caecebb upstream.

When ioctl calls are made with non-null-terminated userspace strings, strlcpy causes an OOB-read from within strlen. Fix by changing to use strscpy instead.

Signed-off-by: Zubin Mithra zsm@chromium.org Reviewed-by: Guenter Roeck groeck@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/core/seq/seq_clientmgr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/sound/core/seq/seq_clientmgr.c +++ b/sound/core/seq/seq_clientmgr.c @@ -1249,7 +1249,7 @@ static int snd_seq_ioctl_set_client_info

/* fill the info fields */ if (client_info.name[0]) - strlcpy(client->name, client_info.name, sizeof(client->name)); + strscpy(client->name, client_info.name, sizeof(client->name));

client->filter = client_info.filter; client->event_lost = client_info.event_lost; @@ -1558,7 +1558,7 @@ static int snd_seq_ioctl_create_queue(st /* set queue name */ if (! info.name[0]) snprintf(info.name, sizeof(info.name), "Queue-%d", q->queue); - strlcpy(q->name, info.name, sizeof(q->name)); + strscpy(q->name, info.name, sizeof(q->name)); snd_use_lock_free(&q->use_lock);

if (copy_to_user(arg, &info, sizeof(info))) @@ -1636,7 +1636,7 @@ static int snd_seq_ioctl_set_queue_info( queuefree(q); return -EPERM; } - strlcpy(q->name, info.name, sizeof(q->name)); + strscpy(q->name, info.name, sizeof(q->name)); queuefree(q);

return 0;

From: S.j. Wang shengjiu.wang@nxp.com

commit 0ff4e8c61b794a4bf6c854ab071a1abaaa80f358 upstream.

There is very low possibility ( < 0.1% ) that channel swap happened in beginning when multi output/input pin is enabled. The issue is that hardware can't send data to correct pin in the beginning with the normal enable flow.

This is hardware issue, but there is no errata, the workaround flow is that: Each time playback/recording, firstly clear the xSMA/xSMB, then enable TE/RE, then enable xSMB and xSMA (xSMB must be enabled before xSMA). Which is to use the xSMA as the trigger start register, previously the xCR_TE or xCR_RE is the bit for starting.

Fixes commit 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam festevam@gmail.com Acked-by: Nicolin Chen nicoleotsuka@gmail.com Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/soc/fsl/fsl_esai.c | 47 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 37 insertions(+), 10 deletions(-)

--- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -57,6 +57,8 @@ struct fsl_esai { u32 fifo_depth; u32 slot_width; u32 slots; + u32 tx_mask; + u32 rx_mask; u32 hck_rate[2]; u32 sck_rate[2]; bool hck_dir[2]; @@ -357,21 +359,13 @@ static int fsl_esai_set_dai_tdm_slot(str regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));

- regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMA, - ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(tx_mask)); - regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMB, - ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(tx_mask)); - regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));

- regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMA, - ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(rx_mask)); - regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMB, - ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask)); - esai_priv->slot_width = slot_width; esai_priv->slots = slots; + esai_priv->tx_mask = tx_mask; + esai_priv->rx_mask = rx_mask;

return 0; } @@ -582,6 +576,7 @@ static int fsl_esai_trigger(struct snd_p bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; u8 i, channels = substream->runtime->channels; u32 pins = DIV_ROUND_UP(channels, esai_priv->slots); + u32 mask;

switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -594,15 +589,38 @@ static int fsl_esai_trigger(struct snd_p for (i = 0; tx && i < channels; i++) regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0);

+ /* + * When set the TE/RE in the end of enablement flow, there + * will be channel swap issue for multi data line case. + * In order to workaround this issue, we switch the bit + * enablement sequence to below sequence + * 1) clear the xSMB & xSMA: which is done in probe and + * stop state. + * 2) set TE/RE + * 3) set xSMB + * 4) set xSMA: xSMA is the last one in this flow, which + * will trigger esai to start. + */ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins)); + mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask; + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx), + ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask)); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx), + ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask)); + break; case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx), + ESAI_xSMA_xS_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx), + ESAI_xSMB_xS_MASK, 0);

/* Disable and reset FIFO */ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), @@ -887,6 +905,15 @@ static int fsl_esai_probe(struct platfor return ret; }

+ esai_priv->tx_mask = 0xFFFFFFFF; + esai_priv->rx_mask = 0xFFFFFFFF; + + /* Clear the TSMA, TSMB, RSMA, RSMB */ + regmap_write(esai_priv->regmap, REG_ESAI_TSMA, 0); + regmap_write(esai_priv->regmap, REG_ESAI_TSMB, 0); + regmap_write(esai_priv->regmap, REG_ESAI_RSMA, 0); + regmap_write(esai_priv->regmap, REG_ESAI_RSMB, 0); + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_esai_component, &fsl_esai_dai, 1); if (ret) {

From: Stephen Boyd swboyd@chromium.org

commit 325aa19598e410672175ed50982f902d4e3f31c5 upstream.

If a child irqchip calls irq_chip_set_wake_parent() but its parent irqchip has the IRQCHIP_SKIP_SET_WAKE flag set an error is returned.

This is inconsistent behaviour vs. set_irq_wake_real() which returns 0 when the irqchip has the IRQCHIP_SKIP_SET_WAKE flag set. It doesn't attempt to walk the chain of parents and set irq wake on any chips that don't have the flag set either. If the intent is to call the .irq_set_wake() callback of the parent irqchip, then we expect irqchip implementations to omit the IRQCHIP_SKIP_SET_WAKE flag and implement an .irq_set_wake() function that calls irq_chip_set_wake_parent().

The problem has been observed on a Qualcomm sdm845 device where set wake fails on any GPIO interrupts after applying work in progress wakeup irq patches to the GPIO driver. The chain of chips looks like this:

QCOM GPIO -> QCOM PDC (SKIP) -> ARM GIC (SKIP)

The GPIO controllers parent is the QCOM PDC irqchip which in turn has ARM GIC as parent. The QCOM PDC irqchip has the IRQCHIP_SKIP_SET_WAKE flag set, and so does the grandparent ARM GIC.

The GPIO driver doesn't know if the parent needs to set wake or not, so it unconditionally calls irq_chip_set_wake_parent() causing this function to return a failure because the parent irqchip (PDC) doesn't have the .irq_set_wake() callback set. Returning 0 instead makes everything work and irqs from the GPIO controller can be configured for wakeup.

Make it consistent by returning 0 (success) from irq_chip_set_wake_parent() when a parent chip has IRQCHIP_SKIP_SET_WAKE set.

[ tglx: Massaged changelog ]

Fixes: 08b55e2a9208e ("genirq: Add irqchip_set_wake_parent") Signed-off-by: Stephen Boyd swboyd@chromium.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Acked-by: Marc Zyngier marc.zyngier@arm.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: Lina Iyer ilina@codeaurora.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190325181026.247796-1-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/irq/chip.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -1056,6 +1056,10 @@ int irq_chip_set_vcpu_affinity_parent(st int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on) { data = data->parent_data; + + if (data->chip->flags & IRQCHIP_SKIP_SET_WAKE) + return 0; + if (data->chip->irq_set_wake) return data->chip->irq_set_wake(data, on);

From: Will Deacon will.deacon@arm.com

commit 045afc24124d80c6998d9c770844c67912083506 upstream.

Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't explicitly set the return value on the non-faulting path and instead leaves it holding the result of the underlying atomic operation. This means that any FUTEX_WAKE_OP atomic operation which computes a non-zero value will be reported as having failed. Regrettably, I wrote the buggy code back in 2011 and it was upstreamed as part of the initial arm64 support in 2012.

The reasons we appear to get away with this are:

1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get exercised by futex() test applications

2. If the result of the atomic operation is zero, the system call behaves correctly

3. Prior to version 2.25, the only operation used by GLIBC set the futex to zero, and therefore worked as expected. From 2.25 onwards, FUTEX_WAKE_OP is not used by GLIBC at all.

Fix the implementation by ensuring that the return value is either 0 to indicate that the atomic operation completed successfully, or -EFAULT if we encountered a fault when accessing the user mapping.

Cc: stable@kernel.org Fixes: 6170a97460db ("arm64: Atomic operations") Signed-off-by: Will Deacon will.deacon@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm64/include/asm/futex.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -33,8 +33,8 @@ " prfm pstl1strm, %2\n" \ "1: ldxr %w1, %2\n" \ insn "\n" \ -"2: stlxr %w3, %w0, %2\n" \ -" cbnz %w3, 1b\n" \ +"2: stlxr %w0, %w3, %2\n" \ +" cbnz %w0, 1b\n" \ " dmb ish\n" \ "3:\n" \ " .pushsection .fixup,"ax"\n" \ @@ -55,29 +55,29 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr) { - int oldval = 0, ret, tmp; + int oldval, ret, tmp;

pagefault_disable();

switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %w0, %w4", + __futex_atomic_op("mov %w3, %w4", ret, oldval, uaddr, tmp, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %w0, %w1, %w4", + __futex_atomic_op("add %w3, %w1, %w4", ret, oldval, uaddr, tmp, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %w0, %w1, %w4", + __futex_atomic_op("orr %w3, %w1, %w4", ret, oldval, uaddr, tmp, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %w0, %w1, %w4", + __futex_atomic_op("and %w3, %w1, %w4", ret, oldval, uaddr, tmp, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %w0, %w1, %w4", + __futex_atomic_op("eor %w3, %w1, %w4", ret, oldval, uaddr, tmp, oparg); break; default:

From: Mel Gorman mgorman@techsingularity.net

commit 0e9f02450da07fc7b1346c8c32c771555173e397 upstream.

A NULL pointer dereference bug was reported on a distribution kernel but the same issue should be present on mainline kernel. It occured on s390 but should not be arch-specific. A partial oops looks like:

Unable to handle kernel pointer dereference in virtual kernel address space ... Call Trace: ... try_to_wake_up+0xfc/0x450 vhost_poll_wakeup+0x3a/0x50 [vhost] __wake_up_common+0xbc/0x178 __wake_up_common_lock+0x9e/0x160 __wake_up_sync_key+0x4e/0x60 sock_def_readable+0x5e/0x98

The bug hits any time between 1 hour to 3 days. The dereference occurs in update_cfs_rq_h_load when accumulating h_load. The problem is that cfq_rq->h_load_next is not protected by any locking and can be updated by parallel calls to task_h_load. Depending on the compiler, code may be generated that re-reads cfq_rq->h_load_next after the check for NULL and then oops when reading se->avg.load_avg. The dissassembly showed that it was possible to reread h_load_next after the check for NULL.

While this does not appear to be an issue for later compilers, it's still an accident if the correct code is generated. Full locking in this path would have high overhead so this patch uses READ_ONCE to read h_load_next only once and check for NULL before dereferencing. It was confirmed that there were no further oops after 10 days of testing.

As Peter pointed out, it is also necessary to use WRITE_ONCE() to avoid any potential problems with store tearing.

Signed-off-by: Mel Gorman mgorman@techsingularity.net Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Valentin Schneider valentin.schneider@arm.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Mike Galbraith efault@gmx.de Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Fixes: 685207963be9 ("sched: Move h_load calculation to task_h_load()") Link: https://lkml.kernel.org/r/20190319123610.nsivgf3mjbjjesxb@techsingularity.ne... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/sched/fair.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6022,10 +6022,10 @@ static void update_cfs_rq_h_load(struct if (cfs_rq->last_h_load_update == now) return;

- cfs_rq->h_load_next = NULL; + WRITE_ONCE(cfs_rq->h_load_next, NULL); for_each_sched_entity(se) { cfs_rq = cfs_rq_of(se); - cfs_rq->h_load_next = se; + WRITE_ONCE(cfs_rq->h_load_next, se); if (cfs_rq->last_h_load_update == now) break; } @@ -6035,7 +6035,7 @@ static void update_cfs_rq_h_load(struct cfs_rq->last_h_load_update = now; }

- while ((se = cfs_rq->h_load_next) != NULL) { + while ((se = READ_ONCE(cfs_rq->h_load_next)) != NULL) { load = cfs_rq->h_load; load = div64_ul(load * se->avg.load_avg, cfs_rq_load_avg(cfs_rq) + 1);

From: Andre Przywara andre.przywara@arm.com

commit 9cde402a59770a0669d895399c13407f63d7d209 upstream.

There is a Marvell 88SE9170 PCIe SATA controller I found on a board here. Some quick testing with the ARM SMMU enabled reveals that it suffers from the same requester ID mixup problems as the other Marvell chips listed already.

Add the PCI vendor/device ID to the list of chips which need the workaround.

Signed-off-by: Andre Przywara andre.przywara@arm.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/pci/quirks.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3623,6 +3623,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_M /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, quirk_dma_func1_alias); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9170, + quirk_dma_func1_alias); /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, quirk_dma_func1_alias);

[ Upstream commit d64264d6218e6892edd832dc3a5a5857c2856c53 ]

Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh in case ext4_journal_get_write_access() fails. Additionally kvfree() is missing in the same error path. Fix it by moving the ext4_journal_get_write_access() before the ext4 sb update as Ted suggested and release n_group_desc and gdb_bh in case it fails.

Fixes: 61a9c11e5e7a ("ext4: add missing brelse() add_new_gdb_meta_bg()'s error path") Signed-off-by: Lukas Czerner lczerner@redhat.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/resize.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 4bd12247a9be..22c90eb9a4e0 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -907,11 +907,18 @@ static int add_new_gdb_meta_bg(struct super_block *sb, memcpy(n_group_desc, o_group_desc, EXT4_SB(sb)->s_gdb_count * sizeof(struct buffer_head *)); n_group_desc[gdb_num] = gdb_bh; + + BUFFER_TRACE(gdb_bh, "get_write_access"); + err = ext4_journal_get_write_access(handle, gdb_bh); + if (err) { + kvfree(n_group_desc); + brelse(gdb_bh); + return err; + } + EXT4_SB(sb)->s_group_desc = n_group_desc; EXT4_SB(sb)->s_gdb_count++; kvfree(o_group_desc); - BUFFER_TRACE(gdb_bh, "get_write_access"); - err = ext4_journal_get_write_access(handle, gdb_bh); return err; }

[ Upstream commit 6ade657d6125ec3ec07f95fa51e28138aef6208f ]

In case ioremap_nocache fails, the fix releases chip and returns an error code upstream to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu kjlu@umn.edu Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/echoaudio/echoaudio.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c index 286f5e3686a3..d73ee11a32bd 100644 --- a/sound/pci/echoaudio/echoaudio.c +++ b/sound/pci/echoaudio/echoaudio.c @@ -1953,6 +1953,11 @@ static int snd_echo_create(struct snd_card *card, } chip->dsp_registers = (volatile u32 __iomem *) ioremap_nocache(chip->dsp_registers_phys, sz); + if (!chip->dsp_registers) { + dev_err(chip->card->dev, "ioremap failed\n"); + snd_echo_free(chip); + return -ENOMEM; + }

if (request_irq(pci->irq, snd_echo_interrupt, IRQF_SHARED, KBUILD_MODNAME, chip)) {

[ Upstream commit 587443e7773e150ae29e643ee8f41a1eed226565 ]

Code review revealed a race condition which could allow the catas error flow to interrupt the alias guid query post mechanism at random points. Thiis is fixed by doing cancel_delayed_work_sync() instead of cancel_delayed_work() during the alias guid mechanism destroy flow.

Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism") Signed-off-by: Jack Morgenstein jackm@dev.mellanox.co.il Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx4/alias_GUID.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx4/alias_GUID.c b/drivers/infiniband/hw/mlx4/alias_GUID.c index 21cb41a60fe8..3a70b418d913 100644 --- a/drivers/infiniband/hw/mlx4/alias_GUID.c +++ b/drivers/infiniband/hw/mlx4/alias_GUID.c @@ -805,8 +805,8 @@ void mlx4_ib_destroy_alias_guid_service(struct mlx4_ib_dev *dev) unsigned long flags;

for (i = 0 ; i < dev->num_ports; i++) { - cancel_delayed_work(&dev->sriov.alias_guid.ports_guid[i].alias_guid_work); det = &sriov->alias_guid.ports_guid[i]; + cancel_delayed_work_sync(&det->alias_guid_work); spin_lock_irqsave(&sriov->alias_guid.ag_work_lock, flags); while (!list_empty(&det->cb_list)) { cb_ctx = list_entry(det->cb_list.next,

[ Upstream commit b4748e7ab731e436cf5db4786358ada5dd2db6dd ]

The function snd_opl3_drum_switch declaration in the header file has the order of the two arguments on_off and vel swapped when compared to the definition arguments of vel and on_off. Fix this by swapping them around to match the definition.

This error predates the git history, so no idea when this error was introduced.

Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/drivers/opl3/opl3_voice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/drivers/opl3/opl3_voice.h b/sound/drivers/opl3/opl3_voice.h index a371c075ac87..e26702559f61 100644 --- a/sound/drivers/opl3/opl3_voice.h +++ b/sound/drivers/opl3/opl3_voice.h @@ -41,7 +41,7 @@ void snd_opl3_timer_func(unsigned long data);

/* Prototypes for opl3_drums.c */ void snd_opl3_load_drums(struct snd_opl3 *opl3); -void snd_opl3_drum_switch(struct snd_opl3 *opl3, int note, int on_off, int vel, struct snd_midi_channel *chan); +void snd_opl3_drum_switch(struct snd_opl3 *opl3, int note, int vel, int on_off, struct snd_midi_channel *chan);

/* Prototypes for opl3_oss.c */ #ifdef CONFIG_SND_SEQUENCER_OSS

[ Upstream commit 396ee4d0cd52c13b3f6421b8d324d65da5e7e409 ]

int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction.

Signed-off-by: Matthew Garrett mjg59@google.com Signed-off-by: Zhang Rui rui.zhang@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/int340x_thermal/int3400_thermal.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c index 0beed2899163..d4c374cc4f74 100644 --- a/drivers/thermal/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/int340x_thermal/int3400_thermal.c @@ -285,10 +285,9 @@ static int int3400_thermal_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, priv);

- if (priv->uuid_bitmap & 1 << INT3400_THERMAL_PASSIVE_1) { - int3400_thermal_ops.get_mode = int3400_thermal_get_mode; - int3400_thermal_ops.set_mode = int3400_thermal_set_mode; - } + int3400_thermal_ops.get_mode = int3400_thermal_get_mode; + int3400_thermal_ops.set_mode = int3400_thermal_set_mode; + priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0, priv, &int3400_thermal_ops, &int3400_thermal_params, 0, 0);

[ Upstream commit 70c819e4bf1c5f492768b399d898d458ccdad2b6 ]

We should go to the cleanup path, to avoid leaks, detected using gcc's ASan.

Signed-off-by: Changbin Du changbin.du@gmail.com Reviewed-by: Jiri Olsa jolsa@kernel.org Cc: Alexei Starovoitov ast@kernel.org Cc: Daniel Borkmann daniel@iogearbox.net Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Steven Rostedt (VMware) rostedt@goodmis.org Link: http://lkml.kernel.org/r/20190316080556.3075-9-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/builtin-top.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 47719bde34c6..4e64ba8163bb 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -1320,8 +1320,9 @@ int cmd_top(int argc, const char **argv, const char *prefix __maybe_unused) symbol_conf.priv_size = sizeof(struct annotation);

symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name == NULL); - if (symbol__init(NULL) < 0) - return -1; + status = symbol__init(NULL); + if (status < 0) + goto out_delete_evlist;

sort__setup_elide(stdout);

[ Upstream commit 93faa52e8371f0291ee1ff4994edae2b336b6233 ]

================================================================= ==7497==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45 #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103 #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120 #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135 #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36 #6 0x5625e51528e6 in run_test tests/builtin-test.c:358 #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #9 0x5625e515572f in cmd_test tests/builtin-test.c:722 #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du changbin.du@gmail.com Reviewed-by: Jiri Olsa jolsa@kernel.org Cc: Alexei Starovoitov ast@kernel.org Cc: Daniel Borkmann daniel@iogearbox.net Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Steven Rostedt (VMware) rostedt@goodmis.org Fixes: f30a79b012e5 ("perf tools: Add reference counting for cpu_map object") Link: http://lkml.kernel.org/r/20190316080556.3075-15-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/tests/openat-syscall-all-cpus.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/tools/perf/tests/openat-syscall-all-cpus.c b/tools/perf/tests/openat-syscall-all-cpus.c index 2006485a2859..3848d5ab378d 100644 --- a/tools/perf/tests/openat-syscall-all-cpus.c +++ b/tools/perf/tests/openat-syscall-all-cpus.c @@ -35,7 +35,7 @@ int test__openat_syscall_event_on_all_cpus(void) if (IS_ERR(evsel)) { tracing_path__strerror_open_tp(errno, errbuf, sizeof(errbuf), "syscalls", "sys_enter_openat"); pr_debug("%s\n", errbuf); - goto out_thread_map_delete; + goto out_cpu_map_delete; }

if (perf_evsel__open(evsel, cpus, threads) < 0) { @@ -109,6 +109,8 @@ int test__openat_syscall_event_on_all_cpus(void) perf_evsel__close_fd(evsel, 1, threads->nr); out_evsel_delete: perf_evsel__delete(evsel); +out_cpu_map_delete: + cpu_map__put(cpus); out_thread_map_delete: thread_map__put(threads); return err;

[ Upstream commit 2e84f116afca3719c9d0a1a78b47b48f75fd5724 ]

hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks a check.

Add a check to prevent NULL pointer dereference.

Signed-off-by: Aditya Pakki pakki001@umn.edu Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: kjlu@umn.edu Cc: Borislav Petkov bp@alien8.de Cc: "H. Peter Anvin" hpa@zytor.com Cc: Kees Cook keescook@chromium.org Cc: Joe Perches joe@perches.com Cc: Nicolai Stange nstange@suse.de Cc: Roland Dreier roland@purestorage.com Link: https://lkml.kernel.org/r/20190319021958.17275-1-pakki001@umn.edu Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/hpet.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 3fdc1e53aaac..9cce5504a5c7 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -825,6 +825,8 @@ int __init hpet_enable(void) return 0;

hpet_set_mapping(); + if (!hpet_virt_address) + return 0;

/* * Read the period and check for a sane value:

[ Upstream commit 5bb71fc790a88d063507dc5d445ab8b14e845591 ]

The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register).

Cc: Jacob Pan jacob.jun.pan@linux.intel.com Cc: mark gross mgross@intel.com Suggested-by: Ashok Raj ashok.raj@intel.com Fixes: f8bab73515ca5 ("intel-iommu: PMEN support") Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel-iommu.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 8b4a4d95669a..3e97c4b2ebed 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -1598,6 +1598,9 @@ static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu) u32 pmen; unsigned long flags;

+ if (!cap_plmr(iommu->cap) && !cap_phmr(iommu->cap)) + return; + raw_spin_lock_irqsave(&iommu->register_lock, flags); pmen = readl(iommu->reg + DMAR_PMEN_REG); pmen &= ~DMA_PMEN_EPM;

[ Upstream commit 85f9987b236cf46e06ffdb5c225cf1f3c0acb789 ]

It was mapped to EIO which can be confusing when user space queries for an object GUID for an object for which the server file system doesn't support (or hasn't saved one).

As Amir Goldstein suggested this is similar to ENOATTR (equivalently ENODATA in Linux errno definitions) so changing NT STATUS code mapping for OBJECTID_NOT_FOUND to ENODATA.

Signed-off-by: Steve French stfrench@microsoft.com CC: Amir Goldstein amir73il@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/smb2maperror.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/smb2maperror.c b/fs/cifs/smb2maperror.c index 98c25b969ab8..7e93d5706bf6 100644 --- a/fs/cifs/smb2maperror.c +++ b/fs/cifs/smb2maperror.c @@ -1034,7 +1034,8 @@ static const struct status_to_posix_error smb2_error_map_table[] = { {STATUS_UNFINISHED_CONTEXT_DELETED, -EIO, "STATUS_UNFINISHED_CONTEXT_DELETED"}, {STATUS_NO_TGT_REPLY, -EIO, "STATUS_NO_TGT_REPLY"}, - {STATUS_OBJECTID_NOT_FOUND, -EIO, "STATUS_OBJECTID_NOT_FOUND"}, + /* Note that ENOATTTR and ENODATA are the same errno */ + {STATUS_OBJECTID_NOT_FOUND, -ENODATA, "STATUS_OBJECTID_NOT_FOUND"}, {STATUS_NO_IP_ADDRESSES, -EIO, "STATUS_NO_IP_ADDRESSES"}, {STATUS_WRONG_CREDENTIAL_HANDLE, -EIO, "STATUS_WRONG_CREDENTIAL_HANDLE"},

[ Upstream commit 4c62764d0fc21a34ffc44eec1210038c3a2e4473 ]

While running regressions, observed below kernel panic when sdio disconnect called. This is because of, kthread_stop() is taking care of wait_for_completion() by default. When wait_for_completion triggered in kthread_stop and as it was done already, giving kernel panic. Hence, removing redundant wait_for_completion() from rsi_kill_thread().

... skipping ... BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810a63df>] exit_creds+0x1f/0x50 PGD 0 Oops: 0002 [#1] SMP CPU: 0 PID: 6502 Comm: rmmod Tainted: G OE 4.15.9-Generic #154-Ubuntu Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.00 04/17/2017 Stack: ffff88007392e600 ffff880075847dc0 ffffffff8108160a 0000000000000000 ffff88007392e600 ffff880075847de8 ffffffff810a484b ffff880076127000 ffff88003cd3a800 ffff880074f12a00 ffff880075847e28 ffffffffc09bed15 Call Trace: [<ffffffff8108160a>] __put_task_struct+0x5a/0x140 [<ffffffff810a484b>] kthread_stop+0x10b/0x110 [<ffffffffc09bed15>] rsi_disconnect+0x2f5/0x300 [ven_rsi_sdio] [<ffffffff81578bcb>] ? __pm_runtime_resume+0x5b/0x80 [<ffffffff816f0918>] sdio_bus_remove+0x38/0x100 [<ffffffff8156cc64>] __device_release_driver+0xa4/0x150 [<ffffffff8156d7a5>] driver_detach+0xb5/0xc0 [<ffffffff8156c6c5>] bus_remove_driver+0x55/0xd0 [<ffffffff8156dfbc>] driver_unregister+0x2c/0x50 [<ffffffff816f0b8a>] sdio_unregister_driver+0x1a/0x20 [<ffffffffc09bf0f5>] rsi_module_exit+0x15/0x30 [ven_rsi_sdio] [<ffffffff8110cad8>] SyS_delete_module+0x1b8/0x210 [<ffffffff81851dc8>] entry_SYSCALL_64_fastpath+0x1c/0xbb

Signed-off-by: Siva Rebbagondla siva.rebbagondla@redpinesignals.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/rsi/rsi_common.h | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_common.h b/drivers/net/wireless/rsi/rsi_common.h index d3fbe33d2324..a13f08fd8690 100644 --- a/drivers/net/wireless/rsi/rsi_common.h +++ b/drivers/net/wireless/rsi/rsi_common.h @@ -75,7 +75,6 @@ static inline int rsi_kill_thread(struct rsi_thread *handle) atomic_inc(&handle->thread_done); rsi_set_event(&handle->event);

- wait_for_completion(&handle->completion); return kthread_stop(handle->task); }

[ Upstream commit 5e172f75e51e3de1b4274146d9b990f803cb5c2a ]

The default P9_LOCK_TIMEOUT can be too long for some users exporting a local file system to a guest VM (30s), make this configurable at mount time.

Link: http://lkml.kernel.org/r/1536295827-3181-1-git-send-email-asmadeus@codewreck... Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195727 Signed-off-by: Dinu-Razvan Chis-Serban justcsdr@gmail.com Signed-off-by: Dominique Martinet dominique.martinet@cea.fr Signed-off-by: Sasha Levin sashal@kernel.org --- fs/9p/v9fs.c | 21 +++++++++++++++++++++ fs/9p/v9fs.h | 1 + fs/9p/vfs_file.c | 6 +++++- 3 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c index 6caca025019d..1e9bb8db7b48 100644 --- a/fs/9p/v9fs.c +++ b/fs/9p/v9fs.c @@ -59,6 +59,8 @@ enum { Opt_cache_loose, Opt_fscache, Opt_mmap, /* Access options */ Opt_access, Opt_posixacl, + /* Lock timeout option */ + Opt_locktimeout, /* Error token */ Opt_err }; @@ -78,6 +80,7 @@ static const match_table_t tokens = { {Opt_cachetag, "cachetag=%s"}, {Opt_access, "access=%s"}, {Opt_posixacl, "posixacl"}, + {Opt_locktimeout, "locktimeout=%u"}, {Opt_err, NULL} };

@@ -126,6 +129,7 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) #ifdef CONFIG_9P_FSCACHE v9ses->cachetag = NULL; #endif + v9ses->session_lock_timeout = P9_LOCK_TIMEOUT;

if (!opts) return 0; @@ -298,6 +302,23 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) #endif break;

+ case Opt_locktimeout: + r = match_int(&args[0], &option); + if (r < 0) { + p9_debug(P9_DEBUG_ERROR, + "integer field, but no integer?\n"); + ret = r; + continue; + } + if (option < 1) { + p9_debug(P9_DEBUG_ERROR, + "locktimeout must be a greater than zero integer.\n"); + ret = -EINVAL; + continue; + } + v9ses->session_lock_timeout = (long)option * HZ; + break; + default: continue; } diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h index 6877050384a1..3775f275ede3 100644 --- a/fs/9p/v9fs.h +++ b/fs/9p/v9fs.h @@ -116,6 +116,7 @@ struct v9fs_session_info { struct list_head slist; /* list of sessions registered with v9fs */ struct backing_dev_info bdi; struct rw_semaphore rename_sem; + long session_lock_timeout; /* retry interval for blocking locks */ };

/* cache_validity flags */ diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index 62ce8b4a7e5f..373cc50544e9 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -154,6 +154,7 @@ static int v9fs_file_do_lock(struct file *filp, int cmd, struct file_lock *fl) uint8_t status = P9_LOCK_ERROR; int res = 0; unsigned char fl_type; + struct v9fs_session_info *v9ses;

fid = filp->private_data; BUG_ON(fid == NULL); @@ -189,6 +190,8 @@ static int v9fs_file_do_lock(struct file *filp, int cmd, struct file_lock *fl) if (IS_SETLKW(cmd)) flock.flags = P9_LOCK_FLAGS_BLOCK;

+ v9ses = v9fs_inode2v9ses(file_inode(filp)); + /* * if its a blocked request and we get P9_LOCK_BLOCKED as the status * for lock request, keep on trying @@ -202,7 +205,8 @@ static int v9fs_file_do_lock(struct file *filp, int cmd, struct file_lock *fl) break; if (status == P9_LOCK_BLOCKED && !IS_SETLKW(cmd)) break; - if (schedule_timeout_interruptible(P9_LOCK_TIMEOUT) != 0) + if (schedule_timeout_interruptible(v9ses->session_lock_timeout) + != 0) break; /* * p9_client_lock_dotl overwrites flock.client_id with the

[ Upstream commit 4bb1ce2350a598502b23088b169e16b43d4bc639 ]

When console device is rebinded, console_setup() is called again. But marking it as __init means that function will be clear after boot is complete. If console device is binded again console_setup() is not found and error "Unable to handle kernel paging request at virtual address" is reported.

Signed-off-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/xilinx_uartps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 4f2f4aca8d2e..06efcef1b495 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1145,7 +1145,7 @@ static void cdns_uart_console_write(struct console *co, const char *s, * * Return: 0 on success, negative errno otherwise. */ -static int __init cdns_uart_console_setup(struct console *co, char *options) +static int cdns_uart_console_setup(struct console *co, char *options) { struct uart_port *port = &cdns_uart_port[co->index]; int baud = 9600;

[ Upstream commit ca1721c5bee77105829cbd7baab8ee0eab85b06d ]

On Apple machines, plugging-in or unplugging the power triggers a GPE for the EC. Since these machines expose an SBS device, this GPE ends up triggering the acpi_sbs_callback(). This in turn tries to get the status of the SBS charger. However, on MBP13,* and MBP14,* machines, performing the smbus-read operation to get the charger's status triggers the EC's GPE again. The result is an endless re-triggering and handling of that GPE, consuming significant CPU resources (> 50% in irq).

In the end this is quite similar to commit 3031cddea633 (ACPI / SBS: Don't assume the existence of an SBS charger), except that on the above machines a status of all 1's is returned. And like there, we just want ignore the charger here.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=198169 Signed-off-by: Ronald Tschalär ronald@innovation.ch Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/sbs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index cb3dedb1beae..b133dac8a7f2 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -443,9 +443,13 @@ static int acpi_ac_get_present(struct acpi_sbs *sbs)

/* * The spec requires that bit 4 always be 1. If it's not set, assume - * that the implementation doesn't support an SBS charger + * that the implementation doesn't support an SBS charger. + * + * And on some MacBooks a status of 0xffff is always returned, no + * matter whether the charger is plugged in or not, which is also + * wrong, so ignore the SBS charger for those too. */ - if (!((status >> 4) & 0x1)) + if (!((status >> 4) & 0x1) || status == 0xffff) return -ENODEV;

sbs->charger_present = (status >> 15) & 0x1;

[ Upstream commit 69216a545cf81b2b32d01948f7039315abaf75a0 ]

The SHA256 code we adopted from the OpenSSL project uses a rather peculiar way to take the address of the round constant table: it takes the address of the sha256_block_data_order() routine, and substracts a constant known quantity to arrive at the base of the table, which is emitted by the same assembler code right before the routine's entry point.

However, recent versions of binutils have helpfully changed the behavior of references emitted via an ADR instruction when running in Thumb2 mode: it now takes the Thumb execution mode bit into account, which is bit 0 af the address. This means the produced table address also has bit 0 set, and so we end up with an address value pointing 1 byte past the start of the table, which results in crashes such as

Unable to handle kernel paging request at virtual address bf825000 pgd = 42f44b11 [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000 Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2 Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ... CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm] LR is at __this_module+0x17fd/0xffffe800 [sha256_arm] pc : [<bf820bca>] lr : [<bf824ffd>] psr: 800b0033 sp : ebc8bbe8 ip : faaabe1c fp : 2fdd3433 r10: 4c5f1692 r9 : e43037df r8 : b04b0a5a r7 : c369d722 r6 : 39c3693e r5 : 7a013189 r4 : 1580d26b r3 : 8762a9b0 r2 : eea9c2cd r1 : 3e9ab536 r0 : 1dea4ae7 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment user Control: 70c5383d Table: 6b8467c0 DAC: dbadc0de Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23) Stack: (0xebc8bbe8 to 0xebc8c000) ... unwind: Unknown symbol address bf820bca unwind: Index not found bf820bca Code: 441a ea80 40f9 440a (f85e) 3b04 ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built with a recent toolchain, apply a minimal backportable fix, which is to emit another non-code label at the start of the routine, and reference that instead. (This is similar to the current upstream state of this file in OpenSSL)

Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/crypto/sha256-armv4.pl | 3 ++- arch/arm/crypto/sha256-core.S_shipped | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/crypto/sha256-armv4.pl b/arch/arm/crypto/sha256-armv4.pl index fac0533ea633..f64e8413ab9a 100644 --- a/arch/arm/crypto/sha256-armv4.pl +++ b/arch/arm/crypto/sha256-armv4.pl @@ -205,10 +205,11 @@ K256: .global sha256_block_data_order .type sha256_block_data_order,%function sha256_block_data_order: +.Lsha256_block_data_order: #if __ARM_ARCH__<7 sub r3,pc,#8 @ sha256_block_data_order #else - adr r3,sha256_block_data_order + adr r3,.Lsha256_block_data_order #endif #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) ldr r12,.LOPENSSL_armcap diff --git a/arch/arm/crypto/sha256-core.S_shipped b/arch/arm/crypto/sha256-core.S_shipped index 555a1a8eec90..72c248081d27 100644 --- a/arch/arm/crypto/sha256-core.S_shipped +++ b/arch/arm/crypto/sha256-core.S_shipped @@ -86,10 +86,11 @@ K256: .global sha256_block_data_order .type sha256_block_data_order,%function sha256_block_data_order: +.Lsha256_block_data_order: #if __ARM_ARCH__<7 sub r3,pc,#8 @ sha256_block_data_order #else - adr r3,sha256_block_data_order + adr r3,.Lsha256_block_data_order #endif #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) ldr r12,.LOPENSSL_armcap

[ Upstream commit cffaaf0c816238c45cd2d06913476c83eb50f682 ]

Commit 57384592c433 ("iommu/vt-d: Store bus information in RMRR PCI device path") changed the type of the path data, however, the change in path type was not reflected in size calculations. Update to use the correct type and prevent a buffer overflow.

This bug manifests in systems with deep PCI hierarchies, and can lead to an overflow of the static allocated buffer (dmar_pci_notify_info_buf), or can lead to overflow of slab-allocated data.

BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0 Write of size 1 at addr ffffffff90445d80 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.87-rt49-02406-gd0a0e96 #1 Call Trace: ? dump_stack+0x46/0x59 ? print_address_description+0x1df/0x290 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? kasan_report+0x256/0x340 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? e820__memblock_setup+0xb0/0xb0 ? dmar_dev_scope_init+0x424/0x48f ? __down_write_common+0x1ec/0x230 ? dmar_dev_scope_init+0x48f/0x48f ? dmar_free_unused_resources+0x109/0x109 ? cpumask_next+0x16/0x20 ? __kmem_cache_create+0x392/0x430 ? kmem_cache_create+0x135/0x2f0 ? e820__memblock_setup+0xb0/0xb0 ? intel_iommu_init+0x170/0x1848 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? migrate_enable+0x27a/0x5b0 ? sched_setattr+0x20/0x20 ? migrate_disable+0x1fc/0x380 ? task_rq_lock+0x170/0x170 ? try_to_run_init_process+0x40/0x40 ? locks_remove_file+0x85/0x2f0 ? dev_prepare_static_identity_mapping+0x78/0x78 ? rt_spin_unlock+0x39/0x50 ? lockref_put_or_lock+0x2a/0x40 ? dput+0x128/0x2f0 ? __rcu_read_unlock+0x66/0x80 ? __fput+0x250/0x300 ? __rcu_read_lock+0x1b/0x30 ? mntput_no_expire+0x38/0x290 ? e820__memblock_setup+0xb0/0xb0 ? pci_iommu_init+0x25/0x63 ? pci_iommu_init+0x25/0x63 ? do_one_initcall+0x7e/0x1c0 ? initcall_blacklisted+0x120/0x120 ? kernel_init_freeable+0x27b/0x307 ? rest_init+0xd0/0xd0 ? kernel_init+0xf/0x120 ? rest_init+0xd0/0xd0 ? ret_from_fork+0x1f/0x40 The buggy address belongs to the variable: dmar_pci_notify_info_buf+0x40/0x60

Fixes: 57384592c433 ("iommu/vt-d: Store bus information in RMRR PCI device path") Signed-off-by: Julia Cartwright julia@ni.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/dmar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c index 5a63e32a4a6b..cbad1926cec1 100644 --- a/drivers/iommu/dmar.c +++ b/drivers/iommu/dmar.c @@ -143,7 +143,7 @@ dmar_alloc_pci_notify_info(struct pci_dev *dev, unsigned long event) for (tmp = dev; tmp; tmp = tmp->bus->self) level++;

- size = sizeof(*info) + level * sizeof(struct acpi_dmar_pci_path); + size = sizeof(*info) + level * sizeof(info->path[0]); if (size <= sizeof(dmar_pci_notify_info_buf)) { info = (struct dmar_pci_notify_info *)dmar_pci_notify_info_buf; } else {

[ Upstream commit 6377f787aeb945cae7abbb6474798de129e1f3ac ]

KASAN report this:

BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806

CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff

Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected

Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: YueHaibing yuehaibing@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/atalk.h | 2 +- net/appletalk/atalk_proc.c | 2 +- net/appletalk/ddp.c | 37 ++++++++++++++++++++++++++------ net/appletalk/sysctl_net_atalk.c | 5 ++++- 4 files changed, 37 insertions(+), 9 deletions(-)

diff --git a/include/linux/atalk.h b/include/linux/atalk.h index 73fd8b7e9534..716d53799d1f 100644 --- a/include/linux/atalk.h +++ b/include/linux/atalk.h @@ -150,7 +150,7 @@ extern int sysctl_aarp_retransmit_limit; extern int sysctl_aarp_resolve_time;

#ifdef CONFIG_SYSCTL -extern void atalk_register_sysctl(void); +extern int atalk_register_sysctl(void); extern void atalk_unregister_sysctl(void); #else #define atalk_register_sysctl() do { } while(0) diff --git a/net/appletalk/atalk_proc.c b/net/appletalk/atalk_proc.c index af46bc49e1e9..b5f84f428aa6 100644 --- a/net/appletalk/atalk_proc.c +++ b/net/appletalk/atalk_proc.c @@ -293,7 +293,7 @@ int __init atalk_proc_init(void) goto out; }

-void __exit atalk_proc_exit(void) +void atalk_proc_exit(void) { remove_proc_entry("interface", atalk_proc_dir); remove_proc_entry("route", atalk_proc_dir); diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index d5871ac493eb..4246df3b7ae8 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -1912,12 +1912,16 @@ static const char atalk_err_snap[] __initconst = /* Called by proto.c on kernel start up */ static int __init atalk_init(void) { - int rc = proto_register(&ddp_proto, 0); + int rc;

- if (rc != 0) + rc = proto_register(&ddp_proto, 0); + if (rc) goto out;

- (void)sock_register(&atalk_family_ops); + rc = sock_register(&atalk_family_ops); + if (rc) + goto out_proto; + ddp_dl = register_snap_client(ddp_snap_id, atalk_rcv); if (!ddp_dl) printk(atalk_err_snap); @@ -1925,12 +1929,33 @@ static int __init atalk_init(void) dev_add_pack(&ltalk_packet_type); dev_add_pack(&ppptalk_packet_type);

- register_netdevice_notifier(&ddp_notifier); + rc = register_netdevice_notifier(&ddp_notifier); + if (rc) + goto out_sock; + aarp_proto_init(); - atalk_proc_init(); - atalk_register_sysctl(); + rc = atalk_proc_init(); + if (rc) + goto out_aarp; + + rc = atalk_register_sysctl(); + if (rc) + goto out_proc; out: return rc; +out_proc: + atalk_proc_exit(); +out_aarp: + aarp_cleanup_module(); + unregister_netdevice_notifier(&ddp_notifier); +out_sock: + dev_remove_pack(&ppptalk_packet_type); + dev_remove_pack(&ltalk_packet_type); + unregister_snap_client(ddp_dl); + sock_unregister(PF_APPLETALK); +out_proto: + proto_unregister(&ddp_proto); + goto out; } module_init(atalk_init);

diff --git a/net/appletalk/sysctl_net_atalk.c b/net/appletalk/sysctl_net_atalk.c index ebb864361f7a..4e6042e0fcac 100644 --- a/net/appletalk/sysctl_net_atalk.c +++ b/net/appletalk/sysctl_net_atalk.c @@ -44,9 +44,12 @@ static struct ctl_table atalk_table[] = {

static struct ctl_table_header *atalk_table_header;

-void atalk_register_sysctl(void) +int __init atalk_register_sysctl(void) { atalk_table_header = register_net_sysctl(&init_net, "net/appletalk", atalk_table); + if (!atalk_table_header) + return -ENOMEM; + return 0; }

void atalk_unregister_sysctl(void)

[ Upstream commit a4046c06be50a4f01d435aa7fe57514818e6cc82 ]

Use offsetof() to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang:

UBSAN: Undefined behaviour in mm/swapfile.c:3010:38 member access within null pointer of type 'union swap_header' CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43 Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 __se_sys_swapon+0x654/0x1084 __arm64_sys_swapon+0x1c/0x24 el0_svc_common+0xa8/0x150 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x18

Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.org Signed-off-by: Pi-Hsun Shih pihsun@chromium.org Acked-by: Michal Hocko mhocko@suse.com Reviewed-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/swap.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -135,9 +135,9 @@ struct swap_extent { /* * Max bad pages in the new format.. */ -#define __swapoffset(x) ((unsigned long)&((union swap_header *)0)->x) #define MAX_SWAP_BADPAGES \ - ((__swapoffset(magic.magic) - __swapoffset(info.badpages)) / sizeof(int)) + ((offsetof(union swap_header, magic.magic) - \ + offsetof(union swap_header, info.badpages)) / sizeof(int))

enum { SWP_USED = (1 << 0), /* is slot in swap_info[] used? */

[ Upstream commit d0e13f5bbe4be7c8f27736fc40503dcec04b7de0 ]

Fix a regression when creating a file over a whiteout. The new file/directory needs to use the current fsuid/fsgid, not the ones from the mounter's credentials.

The refcounting is a bit tricky: prepare_creds() sets an original refcount, override_creds() gets one more, which revert_cred() drops. So

1) we need to expicitly put the mounter's credentials when overriding with the updated one

2) we need to put the original ref to the updated creds (and this can safely be done before revert_creds(), since we'll still have the ref from override_creds()).

Reported-by: Stephen Smalley sds@tycho.nsa.gov Fixes: 3fe6e52f0626 ("ovl: override creds with the ones from the superblock mounter") Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin (Microsoft) sashal@kernel.org --- fs/overlayfs/dir.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c index f8aa54272121..eedacae889b9 100644 --- a/fs/overlayfs/dir.c +++ b/fs/overlayfs/dir.c @@ -408,12 +408,21 @@ static int ovl_create_or_link(struct dentry *dentry, int mode, dev_t rdev, err = ovl_create_upper(dentry, inode, &stat, link, hardlink); } else { const struct cred *old_cred; + struct cred *override_cred;

old_cred = ovl_override_creds(dentry->d_sb);

- err = ovl_create_over_whiteout(dentry, inode, &stat, link, - hardlink); + err = -ENOMEM; + override_cred = prepare_creds(); + if (override_cred) { + override_cred->fsuid = old_cred->fsuid; + override_cred->fsgid = old_cred->fsgid; + put_cred(override_creds(override_cred)); + put_cred(override_cred);

+ err = ovl_create_over_whiteout(dentry, inode, &stat, + link, hardlink); + } revert_creds(old_cred); }

From: Sabrina Dubroca sd@queasysnail.net

[ Upstream commit 92480b3977fd3884649d404cbbaf839b70035699 ]

When a bond is enslaved to another bond, bond_netdev_event() only handles the event as if the bond is a master, and skips treating the bond as a slave.

This leads to a refcount leak on the slave, since we don't remove the adjacency to its master and the master holds a reference on the slave.

Reproducer: ip link add bondL type bond ip link add bondU type bond ip link set bondL master bondU ip link del bondL

No "Fixes:" tag, this code is older than git history.

Signed-off-by: Sabrina Dubroca sd@queasysnail.net Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/bonding/bond_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3067,8 +3067,12 @@ static int bond_netdev_event(struct noti return NOTIFY_DONE;

if (event_dev->flags & IFF_MASTER) { + int ret; + netdev_dbg(event_dev, "IFF_MASTER\n"); - return bond_master_netdev_event(event, event_dev); + ret = bond_master_netdev_event(event, event_dev); + if (ret != NOTIFY_DONE) + return ret; }

if (event_dev->flags & IFF_SLAVE) {

From: Nikolay Aleksandrov nikolay@cumulusnetworks.com

[ Upstream commit c5b493ce192bd7a4e7bd073b5685aad121eeef82 ]

br_multicast_start_querier() walks over the port list but it can be called from a timer with only multicast_lock held which doesn't protect the port list, so use RCU to walk over it.

Fixes: c83b8fab06fc ("bridge: Restart queries when last querier expires") Signed-off-by: Nikolay Aleksandrov nikolay@cumulusnetworks.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/bridge/br_multicast.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1894,7 +1894,8 @@ static void br_multicast_start_querier(s

__br_multicast_open(br, query);

- list_for_each_entry(port, &br->port_list, list) { + rcu_read_lock(); + list_for_each_entry_rcu(port, &br->port_list, list) { if (port->state == BR_STATE_DISABLED || port->state == BR_STATE_BLOCKING) continue; @@ -1906,6 +1907,7 @@ static void br_multicast_start_querier(s br_multicast_enable(&port->ip6_own_query); #endif } + rcu_read_unlock(); }

int br_multicast_toggle(struct net_bridge *br, unsigned long val)

From: Eric Dumazet edumazet@google.com

[ Upstream commit 50ce163a72d817a99e8974222dcf2886d5deb1ae ]

For some reason, tcp_grow_window() correctly tests if enough room is present before attempting to increase tp->rcv_ssthresh, but does not prevent it to grow past tcp_space()

This is causing hard to debug issues, like failing the (__tcp_select_window(sk) >= tp->rcv_wnd) test in __tcp_ack_snd_check(), causing ACK delays and possibly slow flows.

Depending on tcp_rmem[2], MTU, skb->len/skb->truesize ratio, we can see the problem happening on "netperf -t TCP_RR -- -r 2000,2000" after about 60 round trips, when the active side no longer sends immediate acks.

This bug predates git history.

Signed-off-by: Eric Dumazet edumazet@google.com Acked-by: Soheil Hassas Yeganeh soheil@google.com Acked-by: Neal Cardwell ncardwell@google.com Acked-by: Wei Wang weiwan@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp_input.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -365,11 +365,12 @@ static int __tcp_grow_window(const struc static void tcp_grow_window(struct sock *sk, const struct sk_buff *skb) { struct tcp_sock *tp = tcp_sk(sk); + int room; + + room = min_t(int, tp->window_clamp, tcp_space(sk)) - tp->rcv_ssthresh;

/* Check #1 */ - if (tp->rcv_ssthresh < tp->window_clamp && - (int)tp->rcv_ssthresh < tcp_space(sk) && - !tcp_under_memory_pressure(sk)) { + if (room > 0 && !tcp_under_memory_pressure(sk)) { int incr;

/* Check #2. Increase window, if skb with such overhead @@ -382,8 +383,7 @@ static void tcp_grow_window(struct sock

if (incr) { incr = max_t(int, incr, 2 * skb->len); - tp->rcv_ssthresh = min(tp->rcv_ssthresh + incr, - tp->window_clamp); + tp->rcv_ssthresh += min(room, incr); inet_csk(sk)->icsk_ack.quick |= 1; } }

From: Eric Dumazet edumazet@google.com

[ Upstream commit c543cb4a5f07e09237ec0fc2c60c9f131b2c79ad ]

fib_compute_spec_dst() needs to be called under rcu protection.

syzbot reported :

WARNING: suspicious RCU usage 5.1.0-rc4+ #165 Not tainted include/linux/inetdevice.h:220 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1 1 lock held by swapper/0/0: #0: 0000000051b67925 ((&n->timer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:170 [inline] #0: 0000000051b67925 ((&n->timer)){+.-.}, at: call_timer_fn+0xda/0x720 kernel/time/timer.c:1315

stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc4+ #165 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5162 __in_dev_get_rcu include/linux/inetdevice.h:220 [inline] fib_compute_spec_dst+0xbbd/0x1030 net/ipv4/fib_frontend.c:294 spec_dst_fill net/ipv4/ip_options.c:245 [inline] __ip_options_compile+0x15a7/0x1a10 net/ipv4/ip_options.c:343 ipv4_link_failure+0x172/0x400 net/ipv4/route.c:1195 dst_link_failure include/net/dst.h:427 [inline] arp_error_report+0xd1/0x1c0 net/ipv4/arp.c:297 neigh_invalidate+0x24b/0x570 net/core/neighbour.c:995 neigh_timer_handler+0xc35/0xf30 net/core/neighbour.c:1081 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807

Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: syzbot syzkaller@googlegroups.com Cc: Stephen Suryaputra ssuryaextr@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/route.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1164,14 +1164,20 @@ static struct dst_entry *ipv4_dst_check(

static void ipv4_link_failure(struct sk_buff *skb) { - struct rtable *rt; struct ip_options opt; + struct rtable *rt; + int res;

/* Recompile ip options since IPCB may not be valid anymore. */ memset(&opt, 0, sizeof(opt)); opt.optlen = ip_hdr(skb)->ihl*4 - sizeof(struct iphdr); - if (__ip_options_compile(dev_net(skb->dev), &opt, skb, NULL)) + + rcu_read_lock(); + res = __ip_options_compile(dev_net(skb->dev), &opt, skb, NULL); + rcu_read_unlock(); + + if (res) return;

__icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0, &opt);

commit ec91e78d378cc5d4b43805a1227d8e04e5dfa17d upstream.

Commit e49ce14150c6 ("modpost: use linker section to generate table.") was not so cool as we had expected first; it ended up with ugly section hacks when commit dd2a3acaecd7 ("mod/file2alias: make modpost compile on darwin again") came in.

Given a certain degree of unknowledge about the link stage of host programs, I really want to see simple, stupid table lookup so that this works in the same way regardless of the underlying executable format.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com Acked-by: Mathieu Malaterre malat@debian.org [nc: Omit rpmsg, sdw, fslmc, tbsvc, and typec as they don't exist here Add of to avoid backporting two larger patches] Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/mod/file2alias.c | 136 +++++++++++++-------------------------- 1 file changed, 45 insertions(+), 91 deletions(-)

diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 9f5cdd49ff0b..d0b164084225 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -50,46 +50,6 @@ struct devtable { void *function; };

-#define ___cat(a,b) a ## b -#define __cat(a,b) ___cat(a,b) - -/* we need some special handling for this host tool running eventually on - * Darwin. The Mach-O section handling is a bit different than ELF section - * handling. The differnces in detail are: - * a) we have segments which have sections - * b) we need a API call to get the respective section symbols */ -#if defined(__MACH__) -#include <mach-o/getsect.h> - -#define INIT_SECTION(name) do { \ - unsigned long name ## _len; \ - char *__cat(pstart_,name) = getsectdata("__TEXT", \ - #name, &__cat(name,_len)); \ - char *__cat(pstop_,name) = __cat(pstart_,name) + \ - __cat(name, _len); \ - __cat(__start_,name) = (void *)__cat(pstart_,name); \ - __cat(__stop_,name) = (void *)__cat(pstop_,name); \ - } while (0) -#define SECTION(name) __attribute__((section("__TEXT, " #name))) - -struct devtable **__start___devtable, **__stop___devtable; -#else -#define INIT_SECTION(name) /* no-op for ELF */ -#define SECTION(name) __attribute__((section(#name))) - -/* We construct a table of pointers in an ELF section (pointers generally - * go unpadded by gcc). ld creates boundary syms for us. */ -extern struct devtable *__start___devtable[], *__stop___devtable[]; -#endif /* __MACH__ */ - -#if !defined(__used) -# if __GNUC__ == 3 && __GNUC_MINOR__ < 3 -# define __used __attribute__((__unused__)) -# else -# define __used __attribute__((__used__)) -# endif -#endif - /* Define a variable f that holds the value of field f of struct devid * based at address m. */ @@ -102,16 +62,6 @@ extern struct devtable *__start___devtable[], *__stop___devtable[]; #define DEF_FIELD_ADDR(m, devid, f) \ typeof(((struct devid *)0)->f) *f = ((m) + OFF_##devid##_##f)

-/* Add a table entry. We test function type matches while we're here. */ -#define ADD_TO_DEVTABLE(device_id, type, function) \ - static struct devtable __cat(devtable,__LINE__) = { \ - device_id + 0*sizeof((function)((const char *)NULL, \ - (void *)NULL, \ - (char *)NULL)), \ - SIZE_##type, (function) }; \ - static struct devtable *SECTION(__devtable) __used \ - __cat(devtable_ptr,__LINE__) = &__cat(devtable,__LINE__) - #define ADD(str, sep, cond, field) \ do { \ strcat(str, sep); \ @@ -388,7 +338,6 @@ static int do_hid_entry(const char *filename,

return 1; } -ADD_TO_DEVTABLE("hid", hid_device_id, do_hid_entry);

/* Looks like: ieee1394:venNmoNspNverN */ static int do_ieee1394_entry(const char *filename, @@ -413,7 +362,6 @@ static int do_ieee1394_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("ieee1394", ieee1394_device_id, do_ieee1394_entry);

/* Looks like: pci:vNdNsvNsdNbcNscNiN. */ static int do_pci_entry(const char *filename, @@ -457,7 +405,6 @@ static int do_pci_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("pci", pci_device_id, do_pci_entry);

/* looks like: "ccw:tNmNdtNdmN" */ static int do_ccw_entry(const char *filename, @@ -481,7 +428,6 @@ static int do_ccw_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("ccw", ccw_device_id, do_ccw_entry);

/* looks like: "ap:tN" */ static int do_ap_entry(const char *filename, @@ -492,7 +438,6 @@ static int do_ap_entry(const char *filename, sprintf(alias, "ap:t%02X*", dev_type); return 1; } -ADD_TO_DEVTABLE("ap", ap_device_id, do_ap_entry);

/* looks like: "css:tN" */ static int do_css_entry(const char *filename, @@ -503,7 +448,6 @@ static int do_css_entry(const char *filename, sprintf(alias, "css:t%01X", type); return 1; } -ADD_TO_DEVTABLE("css", css_device_id, do_css_entry);

/* Looks like: "serio:tyNprNidNexN" */ static int do_serio_entry(const char *filename, @@ -523,7 +467,6 @@ static int do_serio_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("serio", serio_device_id, do_serio_entry);

/* looks like: "acpi:ACPI0003" or "acpi:PNP0C0B" or "acpi:LNXVIDEO" or * "acpi:bbsspp" (bb=base-class, ss=sub-class, pp=prog-if) @@ -561,7 +504,6 @@ static int do_acpi_entry(const char *filename, } return 1; } -ADD_TO_DEVTABLE("acpi", acpi_device_id, do_acpi_entry);

/* looks like: "pnp:dD" */ static void do_pnp_device_entry(void *symval, unsigned long size, @@ -682,7 +624,6 @@ static int do_pcmcia_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("pcmcia", pcmcia_device_id, do_pcmcia_entry);

static int do_of_entry (const char *filename, void *symval, char *alias) { @@ -707,7 +648,6 @@ static int do_of_entry (const char *filename, void *symval, char *alias) add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("of", of_device_id, do_of_entry);

static int do_vio_entry(const char *filename, void *symval, char *alias) @@ -727,7 +667,6 @@ static int do_vio_entry(const char *filename, void *symval, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("vio", vio_device_id, do_vio_entry);

#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))

@@ -800,7 +739,6 @@ static int do_input_entry(const char *filename, void *symval, do_input(alias, *swbit, 0, INPUT_DEVICE_ID_SW_MAX); return 1; } -ADD_TO_DEVTABLE("input", input_device_id, do_input_entry);

static int do_eisa_entry(const char *filename, void *symval, char *alias) @@ -812,7 +750,6 @@ static int do_eisa_entry(const char *filename, void *symval, strcat(alias, "*"); return 1; } -ADD_TO_DEVTABLE("eisa", eisa_device_id, do_eisa_entry);

/* Looks like: parisc:tNhvNrevNsvN */ static int do_parisc_entry(const char *filename, void *symval, @@ -832,7 +769,6 @@ static int do_parisc_entry(const char *filename, void *symval, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("parisc", parisc_device_id, do_parisc_entry);

/* Looks like: sdio:cNvNdN. */ static int do_sdio_entry(const char *filename, @@ -849,7 +785,6 @@ static int do_sdio_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("sdio", sdio_device_id, do_sdio_entry);

/* Looks like: ssb:vNidNrevN. */ static int do_ssb_entry(const char *filename, @@ -866,7 +801,6 @@ static int do_ssb_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("ssb", ssb_device_id, do_ssb_entry);

/* Looks like: bcma:mNidNrevNclN. */ static int do_bcma_entry(const char *filename, @@ -885,7 +819,6 @@ static int do_bcma_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("bcma", bcma_device_id, do_bcma_entry);

/* Looks like: virtio:dNvN */ static int do_virtio_entry(const char *filename, void *symval, @@ -901,7 +834,6 @@ static int do_virtio_entry(const char *filename, void *symval, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("virtio", virtio_device_id, do_virtio_entry);

/* * Looks like: vmbus:guid @@ -924,7 +856,6 @@ static int do_vmbus_entry(const char *filename, void *symval,

return 1; } -ADD_TO_DEVTABLE("vmbus", hv_vmbus_device_id, do_vmbus_entry);

/* Looks like: i2c:S */ static int do_i2c_entry(const char *filename, void *symval, @@ -935,7 +866,6 @@ static int do_i2c_entry(const char *filename, void *symval,

return 1; } -ADD_TO_DEVTABLE("i2c", i2c_device_id, do_i2c_entry);

/* Looks like: spi:S */ static int do_spi_entry(const char *filename, void *symval, @@ -946,7 +876,6 @@ static int do_spi_entry(const char *filename, void *symval,

return 1; } -ADD_TO_DEVTABLE("spi", spi_device_id, do_spi_entry);

static const struct dmifield { const char *prefix; @@ -1001,7 +930,6 @@ static int do_dmi_entry(const char *filename, void *symval, strcat(alias, ":"); return 1; } -ADD_TO_DEVTABLE("dmi", dmi_system_id, do_dmi_entry);

static int do_platform_entry(const char *filename, void *symval, char *alias) @@ -1010,7 +938,6 @@ static int do_platform_entry(const char *filename, sprintf(alias, PLATFORM_MODULE_PREFIX "%s", *name); return 1; } -ADD_TO_DEVTABLE("platform", platform_device_id, do_platform_entry);

static int do_mdio_entry(const char *filename, void *symval, char *alias) @@ -1035,7 +962,6 @@ static int do_mdio_entry(const char *filename,

return 1; } -ADD_TO_DEVTABLE("mdio", mdio_device_id, do_mdio_entry);

/* Looks like: zorro:iN. */ static int do_zorro_entry(const char *filename, void *symval, @@ -1046,7 +972,6 @@ static int do_zorro_entry(const char *filename, void *symval, ADD(alias, "i", id != ZORRO_WILDCARD, id); return 1; } -ADD_TO_DEVTABLE("zorro", zorro_device_id, do_zorro_entry);

/* looks like: "pnp:dD" */ static int do_isapnp_entry(const char *filename, @@ -1062,7 +987,6 @@ static int do_isapnp_entry(const char *filename, (function >> 12) & 0x0f, (function >> 8) & 0x0f); return 1; } -ADD_TO_DEVTABLE("isapnp", isapnp_device_id, do_isapnp_entry);

/* Looks like: "ipack:fNvNdN". */ static int do_ipack_entry(const char *filename, @@ -1078,7 +1002,6 @@ static int do_ipack_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("ipack", ipack_device_id, do_ipack_entry);

/* * Append a match expression for a single masked hex digit. @@ -1149,7 +1072,6 @@ static int do_amba_entry(const char *filename,

return 1; } -ADD_TO_DEVTABLE("amba", amba_id, do_amba_entry);

/* * looks like: "mipscdmm:tN" @@ -1165,7 +1087,6 @@ static int do_mips_cdmm_entry(const char *filename, sprintf(alias, "mipscdmm:t%02X*", type); return 1; } -ADD_TO_DEVTABLE("mipscdmm", mips_cdmm_device_id, do_mips_cdmm_entry);

/* LOOKS like cpu:type:x86,venVVVVfamFFFFmodMMMM:feature:*,FEAT,* * All fields are numbers. It would be nicer to use strings for vendor @@ -1190,7 +1111,6 @@ static int do_x86cpu_entry(const char *filename, void *symval, sprintf(alias + strlen(alias), "%04X*", feature); return 1; } -ADD_TO_DEVTABLE("x86cpu", x86_cpu_id, do_x86cpu_entry);

/* LOOKS like cpu:type:*:feature:*FEAT* */ static int do_cpu_entry(const char *filename, void *symval, char *alias) @@ -1200,7 +1120,6 @@ static int do_cpu_entry(const char *filename, void *symval, char *alias) sprintf(alias, "cpu:type:*:feature:*%04X*", feature); return 1; } -ADD_TO_DEVTABLE("cpu", cpu_feature, do_cpu_entry);

/* Looks like: mei:S:uuid:N:* */ static int do_mei_entry(const char *filename, void *symval, @@ -1219,7 +1138,6 @@ static int do_mei_entry(const char *filename, void *symval,

return 1; } -ADD_TO_DEVTABLE("mei", mei_cl_device_id, do_mei_entry);

/* Looks like: rapidio:vNdNavNadN */ static int do_rio_entry(const char *filename, @@ -1239,7 +1157,6 @@ static int do_rio_entry(const char *filename, add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("rapidio", rio_device_id, do_rio_entry);

/* Looks like: ulpi:vNpN */ static int do_ulpi_entry(const char *filename, void *symval, @@ -1252,7 +1169,6 @@ static int do_ulpi_entry(const char *filename, void *symval,

return 1; } -ADD_TO_DEVTABLE("ulpi", ulpi_device_id, do_ulpi_entry);

/* Looks like: hdaudio:vNrNaN */ static int do_hda_entry(const char *filename, void *symval, char *alias) @@ -1269,7 +1185,6 @@ static int do_hda_entry(const char *filename, void *symval, char *alias) add_wildcard(alias); return 1; } -ADD_TO_DEVTABLE("hdaudio", hda_device_id, do_hda_entry);

/* Does namelen bytes of name exactly match the symbol? */ static bool sym_is(const char *name, unsigned namelen, const char *symbol) @@ -1302,6 +1217,44 @@ static void do_table(void *symval, unsigned long size, } }

+static const struct devtable devtable[] = { + {"hid", SIZE_hid_device_id, do_hid_entry}, + {"ieee1394", SIZE_ieee1394_device_id, do_ieee1394_entry}, + {"pci", SIZE_pci_device_id, do_pci_entry}, + {"ccw", SIZE_ccw_device_id, do_ccw_entry}, + {"ap", SIZE_ap_device_id, do_ap_entry}, + {"css", SIZE_css_device_id, do_css_entry}, + {"serio", SIZE_serio_device_id, do_serio_entry}, + {"acpi", SIZE_acpi_device_id, do_acpi_entry}, + {"pcmcia", SIZE_pcmcia_device_id, do_pcmcia_entry}, + {"vio", SIZE_vio_device_id, do_vio_entry}, + {"input", SIZE_input_device_id, do_input_entry}, + {"eisa", SIZE_eisa_device_id, do_eisa_entry}, + {"parisc", SIZE_parisc_device_id, do_parisc_entry}, + {"sdio", SIZE_sdio_device_id, do_sdio_entry}, + {"ssb", SIZE_ssb_device_id, do_ssb_entry}, + {"bcma", SIZE_bcma_device_id, do_bcma_entry}, + {"virtio", SIZE_virtio_device_id, do_virtio_entry}, + {"vmbus", SIZE_hv_vmbus_device_id, do_vmbus_entry}, + {"i2c", SIZE_i2c_device_id, do_i2c_entry}, + {"spi", SIZE_spi_device_id, do_spi_entry}, + {"dmi", SIZE_dmi_system_id, do_dmi_entry}, + {"platform", SIZE_platform_device_id, do_platform_entry}, + {"mdio", SIZE_mdio_device_id, do_mdio_entry}, + {"zorro", SIZE_zorro_device_id, do_zorro_entry}, + {"isapnp", SIZE_isapnp_device_id, do_isapnp_entry}, + {"ipack", SIZE_ipack_device_id, do_ipack_entry}, + {"amba", SIZE_amba_id, do_amba_entry}, + {"mipscdmm", SIZE_mips_cdmm_device_id, do_mips_cdmm_entry}, + {"x86cpu", SIZE_x86_cpu_id, do_x86cpu_entry}, + {"cpu", SIZE_cpu_feature, do_cpu_entry}, + {"mei", SIZE_mei_cl_device_id, do_mei_entry}, + {"rapidio", SIZE_rio_device_id, do_rio_entry}, + {"ulpi", SIZE_ulpi_device_id, do_ulpi_entry}, + {"hdaudio", SIZE_hda_device_id, do_hda_entry}, + {"of", SIZE_of_device_id, do_of_entry}, +}; + /* Create MODULE_ALIAS() statements. * At this time, we cannot write the actual output C source yet, * so we write into the mod->dev_table_buf buffer. */ @@ -1354,13 +1307,14 @@ void handle_moddevtable(struct module *mod, struct elf_info *info, else if (sym_is(name, namelen, "pnp_card")) do_pnp_card_entries(symval, sym->st_size, mod); else { - struct devtable **p; - INIT_SECTION(__devtable); + int i; + + for (i = 0; i < ARRAY_SIZE(devtable); i++) { + const struct devtable *p = &devtable[i];

- for (p = __start___devtable; p < __stop___devtable; p++) { - if (sym_is(name, namelen, (*p)->device_id)) { - do_table(symval, sym->st_size, (*p)->id_size, - (*p)->device_id, (*p)->function, mod); + if (sym_is(name, namelen, p->device_id)) { + do_table(symval, sym->st_size, p->id_size, + p->device_id, p->function, mod); break; } }

commit 442601e87a4769a8daba4976ec3afa5222ca211d upstream

Return -E2BIG when the transfer is incomplete. The upper layer does not retry, so not doing that is incorrect behaviour.

Cc: stable@vger.kernel.org Fixes: a2871c62e186 ("tpm: Add support for Atmel I2C TPMs") Signed-off-by: Jarkko Sakkinen jarkko.sakkinen@linux.intel.com Reviewed-by: Stefan Berger stefanb@linux.ibm.com Reviewed-by: Jerry Snitselaar jsnitsel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/tpm/tpm_i2c_atmel.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/char/tpm/tpm_i2c_atmel.c b/drivers/char/tpm/tpm_i2c_atmel.c index dd8f0eb3170a..73f7e0f7e34a 100644 --- a/drivers/char/tpm/tpm_i2c_atmel.c +++ b/drivers/char/tpm/tpm_i2c_atmel.c @@ -65,7 +65,15 @@ static int i2c_atmel_send(struct tpm_chip *chip, u8 *buf, size_t len) dev_dbg(&chip->dev, "%s(buf=%*ph len=%0zx) -> sts=%d\n", __func__, (int)min_t(size_t, 64, len), buf, len, status); - return status; + + if (status < 0) + return status; + + /* The upper layer does not support incomplete sends. */ + if (status != len) + return -E2BIG; + + return 0; }

static int i2c_atmel_recv(struct tpm_chip *chip, u8 *buf, size_t count)

From: Mike Looijmans mike.looijmans@topic.nl

commit 40a7198a4a01037003c7ca714f0d048a61e729ac upstream.

Standard unit for temperature is millidegrees Celcius, whereas this driver was reporting in degrees. Fix the scale factor in the driver.

Signed-off-by: Mike Looijmans mike.looijmans@topic.nl Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/iio/gyro/bmg160_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/iio/gyro/bmg160_core.c +++ b/drivers/iio/gyro/bmg160_core.c @@ -519,11 +519,10 @@ static int bmg160_read_raw(struct iio_de } else return -EINVAL; case IIO_CHAN_INFO_SCALE: - *val = 0; switch (chan->type) { case IIO_TEMP: - *val2 = 500000; - return IIO_VAL_INT_PLUS_MICRO; + *val = 500; + return IIO_VAL_INT; case IIO_ANGL_VEL: { int i; @@ -531,6 +530,7 @@ static int bmg160_read_raw(struct iio_de for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) { if (bmg160_scale_table[i].dps_range == data->dps_range) { + *val = 0; *val2 = bmg160_scale_table[i].scale; return IIO_VAL_INT_PLUS_MICRO; }

From: Georg Ottinger g.ottinger@abatec.at

commit 09c6bdee51183a575bf7546890c8c137a75a2b44 upstream.

Having a brief look at at91_adc_read_raw() it is obvious that in the case of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is omitted. If 2 different channels are queried we can end up with a situation where two interrupts are enabled, but only one interrupt is cleared in the interrupt handler. Resulting in a interrupt loop and a system hang.

Signed-off-by: Georg Ottinger g.ottinger@abatec.at Acked-by: Ludovic Desroches ludovic.desroches@microchip.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/iio/adc/at91_adc.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-)

--- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -702,23 +702,29 @@ static int at91_adc_read_raw(struct iio_ ret = wait_event_interruptible_timeout(st->wq_data_avail, st->done, msecs_to_jiffies(1000)); - if (ret == 0) - ret = -ETIMEDOUT; - if (ret < 0) { - mutex_unlock(&st->lock); - return ret; - } - - *val = st->last_value;

+ /* Disable interrupts, regardless if adc conversion was + * successful or not + */ at91_adc_writel(st, AT91_ADC_CHDR, AT91_ADC_CH(chan->channel)); at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel));

- st->last_value = 0; - st->done = false; + if (ret > 0) { + /* a valid conversion took place */ + *val = st->last_value; + st->last_value = 0; + st->done = false; + ret = IIO_VAL_INT; + } else if (ret == 0) { + /* conversion timeout */ + dev_err(&idev->dev, "ADC Channel %d timeout.\n", + chan->channel); + ret = -ETIMEDOUT; + } + mutex_unlock(&st->lock); - return IIO_VAL_INT; + return ret;

case IIO_CHAN_INFO_SCALE: *val = st->vref_mv;

From: Ian Abbott abbotti@mev.co.uk

commit 08b7c2f9208f0e2a32159e4e7a4831b7adb10a3e upstream.

If `vmk80xx_auto_attach()` returns an error, the core comedi module code will call `vmk80xx_detach()` to clean up. If `vmk80xx_auto_attach()` successfully allocated the comedi device private data, `vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `vmk80xx_auto_attach()` can return an error after allocating the device private data but before initializing the semaphore, so this assumption is invalid. Fix it by initializing the semaphore just after allocating the private data in `vmk80xx_auto_attach()` before any other errors can be returned.

I believe this was the cause of the following syzbot crash report https://syzkaller.appspot.com/bug?extid=54c2f58f15fe6876b6ad:

usb 1-1: config 0 has no interface number 0 usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 down+0x12/0x80 kernel/locking/semaphore.c:58 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com Signed-off-by: Ian Abbott abbotti@mev.co.uk Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/comedi/drivers/vmk80xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -809,6 +809,8 @@ static int vmk80xx_auto_attach(struct co

devpriv->model = board->model;

+ sema_init(&devpriv->limit_sem, 8); + ret = vmk80xx_find_usb_endpoints(dev); if (ret) return ret; @@ -817,8 +819,6 @@ static int vmk80xx_auto_attach(struct co if (ret) return ret;

- sema_init(&devpriv->limit_sem, 8); - usb_set_intfdata(intf, devpriv);

if (devpriv->model == VMK8055_MODEL)

From: Ian Abbott abbotti@mev.co.uk

commit 660cf4ce9d0f3497cc7456eaa6d74c8b71d6282c upstream.

If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine).

I believe this was the cause of the following syzbot crash report https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6:

usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com Signed-off-by: Ian Abbott abbotti@mev.co.uk Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/comedi/drivers/ni_usb6501.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/staging/comedi/drivers/ni_usb6501.c +++ b/drivers/staging/comedi/drivers/ni_usb6501.c @@ -527,6 +527,9 @@ static int ni6501_auto_attach(struct com if (!devpriv) return -ENOMEM;

+ mutex_init(&devpriv->mut); + usb_set_intfdata(intf, devpriv); + ret = ni6501_find_endpoints(dev); if (ret) return ret; @@ -535,9 +538,6 @@ static int ni6501_auto_attach(struct com if (ret) return ret;

- mutex_init(&devpriv->mut); - usb_set_intfdata(intf, devpriv); - ret = comedi_alloc_subdevices(dev, 2); if (ret) return ret;

From: Takashi Iwai tiwai@suse.de

commit 2a3f7221acddfe1caa9ff09b3a8158c39b2fdeac upstream.

There is a small race window in the card disconnection code that allows the registration of another card with the very same card id. This leads to a warning in procfs creation as caught by syzkaller.

The problem is that we delete snd_cards and snd_cards_lock entries at the very beginning of the disconnection procedure. This makes the slot available to be assigned for another card object while the disconnection procedure is being processed. Then it becomes possible to issue a procfs registration with the existing file name although we check the conflict beforehand.

The fix is simply to move the snd_cards and snd_cards_lock clearances at the end of the disconnection procedure. The references to these entries are merely either from the global proc files like /proc/asound/cards or from the card registration / disconnection, so it should be fine to shift at the very end.

Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/core/init.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/sound/core/init.c +++ b/sound/core/init.c @@ -405,14 +405,7 @@ int snd_card_disconnect(struct snd_card card->shutdown = 1; spin_unlock(&card->files_lock);

- /* phase 1: disable fops (user space) operations for ALSA API */ - mutex_lock(&snd_card_mutex); - snd_cards[card->number] = NULL; - clear_bit(card->number, snd_cards_lock); - mutex_unlock(&snd_card_mutex); - - /* phase 2: replace file->f_op with special dummy operations */ - + /* replace file->f_op with special dummy operations */ spin_lock(&card->files_lock); list_for_each_entry(mfile, &card->files_list, list) { /* it's critical part, use endless loop */ @@ -428,7 +421,7 @@ int snd_card_disconnect(struct snd_card } spin_unlock(&card->files_lock);

- /* phase 3: notify all connected devices about disconnection */ + /* notify all connected devices about disconnection */ /* at this point, they cannot respond to any calls except release() */

#if IS_ENABLED(CONFIG_SND_MIXER_OSS) @@ -444,6 +437,13 @@ int snd_card_disconnect(struct snd_card device_del(&card->card_dev); card->registered = false; } + + /* disable fops (user space) operations for ALSA API */ + mutex_lock(&snd_card_mutex); + snd_cards[card->number] = NULL; + clear_bit(card->number, snd_cards_lock); + mutex_unlock(&snd_card_mutex); + #ifdef CONFIG_PM wake_up(&card->power_sleep); #endif