From: Dmitry Osipenko dmitry.osipenko@collabora.com
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe.
Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko dmitry.osipenko@collabora.com Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com --- drivers/staging/media/sunxi/cedrus/cedrus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c index 960a0130cd620..55c54dfdc585c 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus.c @@ -448,6 +448,8 @@ static int cedrus_probe(struct platform_device *pdev) if (!dev) return -ENOMEM;
+ platform_set_drvdata(pdev, dev); + dev->vfd = cedrus_video_device; dev->dev = &pdev->dev; dev->pdev = pdev; @@ -521,8 +523,6 @@ static int cedrus_probe(struct platform_device *pdev) goto err_m2m_mc; }
- platform_set_drvdata(pdev, dev); - return 0;
err_m2m_mc:
Dne četrtek, 18. avgust 2022 ob 22:33:07 CEST je Nicolas Dufresne napisal(a):
From: Dmitry Osipenko dmitry.osipenko@collabora.com
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe.
Does it even work without PM? Maybe it would be better if Cedrus would select PM in Kconfig.
Best regards, Jernej
Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko dmitry.osipenko@collabora.com Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com
drivers/staging/media/sunxi/cedrus/cedrus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c index 960a0130cd620..55c54dfdc585c 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus.c @@ -448,6 +448,8 @@ static int cedrus_probe(struct platform_device *pdev) if (!dev) return -ENOMEM;
- platform_set_drvdata(pdev, dev);
- dev->vfd = cedrus_video_device; dev->dev = &pdev->dev; dev->pdev = pdev;
@@ -521,8 +523,6 @@ static int cedrus_probe(struct platform_device *pdev) goto err_m2m_mc; }
- platform_set_drvdata(pdev, dev);
- return 0;
err_m2m_mc:
Le vendredi 19 août 2022 à 06:17 +0200, Jernej Škrabec a écrit :
Dne četrtek, 18. avgust 2022 ob 22:33:07 CEST je Nicolas Dufresne napisal(a):
From: Dmitry Osipenko dmitry.osipenko@collabora.com
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe.
Does it even work without PM? Maybe it would be better if Cedrus would select PM in Kconfig.
I cannot comment myself on this, but it does not seem to invalidate this Dmitry's fix.
Best regards, Jernej
Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko dmitry.osipenko@collabora.com Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com
drivers/staging/media/sunxi/cedrus/cedrus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c index 960a0130cd620..55c54dfdc585c 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus.c @@ -448,6 +448,8 @@ static int cedrus_probe(struct platform_device *pdev) if (!dev) return -ENOMEM;
- platform_set_drvdata(pdev, dev);
- dev->vfd = cedrus_video_device; dev->dev = &pdev->dev; dev->pdev = pdev;
@@ -521,8 +523,6 @@ static int cedrus_probe(struct platform_device *pdev) goto err_m2m_mc; }
- platform_set_drvdata(pdev, dev);
- return 0;
err_m2m_mc:
Dne petek, 19. avgust 2022 ob 17:37:20 CEST je Nicolas Dufresne napisal(a):
Le vendredi 19 août 2022 à 06:17 +0200, Jernej Škrabec a écrit :
Dne četrtek, 18. avgust 2022 ob 22:33:07 CEST je Nicolas Dufresne
napisal(a):
From: Dmitry Osipenko dmitry.osipenko@collabora.com
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe.
Does it even work without PM? Maybe it would be better if Cedrus would select PM in Kconfig.
I cannot comment myself on this, but it does not seem to invalidate this Dmitry's fix.
If NULL pointer dereference happens only when PM is disabled, then it does. I have PM always enabled and I never experienced above issue.
Best regards, Jernej
Best regards, Jernej
Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko dmitry.osipenko@collabora.com Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com
drivers/staging/media/sunxi/cedrus/cedrus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c index 960a0130cd620..55c54dfdc585c 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus.c @@ -448,6 +448,8 @@ static int cedrus_probe(struct platform_device *pdev)
if (!dev) return -ENOMEM;
platform_set_drvdata(pdev, dev);
dev->vfd = cedrus_video_device; dev->dev = &pdev->dev; dev->pdev = pdev;
@@ -521,8 +523,6 @@ static int cedrus_probe(struct platform_device *pdev)
goto err_m2m_mc;}
platform_set_drvdata(pdev, dev);
return 0;
err_m2m_mc:
On 8/20/22 11:25, Jernej Škrabec wrote:
Dne petek, 19. avgust 2022 ob 17:37:20 CEST je Nicolas Dufresne napisal(a):
Le vendredi 19 août 2022 à 06:17 +0200, Jernej Škrabec a écrit :
Dne četrtek, 18. avgust 2022 ob 22:33:07 CEST je Nicolas Dufresne
napisal(a):
From: Dmitry Osipenko dmitry.osipenko@collabora.com
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe.
Does it even work without PM? Maybe it would be better if Cedrus would select PM in Kconfig.
I cannot comment myself on this, but it does not seem to invalidate this Dmitry's fix.
If NULL pointer dereference happens only when PM is disabled, then it does. I have PM always enabled and I never experienced above issue.
Originally this fix was needed when I changed cedrus_hw_probe() to do the rpm-resume while was debugging the hang issue and then also noticed that the !PM should be broken. It's a good common practice for all drivers to have the drv data set early to avoid such problems, hence it won't hurt to make this change anyways.
In practice nobody disables PM other than for debugging purposes and !PM handling is often broken in drivers. I assume that it might be even better to enable PM for all Allwiner SoCs and remove !PM handling from all the affected drivers, like it was done for Tegra some time ago.
Dne nedelja, 21. avgust 2022 ob 22:40:21 CEST je Dmitry Osipenko napisal(a):
On 8/20/22 11:25, Jernej Škrabec wrote:
Dne petek, 19. avgust 2022 ob 17:37:20 CEST je Nicolas Dufresne
napisal(a):
Le vendredi 19 août 2022 à 06:17 +0200, Jernej Škrabec a écrit :
Dne četrtek, 18. avgust 2022 ob 22:33:07 CEST je Nicolas Dufresne
napisal(a):
From: Dmitry Osipenko dmitry.osipenko@collabora.com
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe.
Does it even work without PM? Maybe it would be better if Cedrus would select PM in Kconfig.
I cannot comment myself on this, but it does not seem to invalidate this Dmitry's fix.
If NULL pointer dereference happens only when PM is disabled, then it does. I have PM always enabled and I never experienced above issue.
Originally this fix was needed when I changed cedrus_hw_probe() to do the rpm-resume while was debugging the hang issue and then also noticed that the !PM should be broken. It's a good common practice for all drivers to have the drv data set early to avoid such problems, hence it won't hurt to make this change anyways.
Ok, as others pointed out, this is still a good thing, so:
Acked-by: Jernej Skrabec jernej.skrabec@gmail.com
In practice nobody disables PM other than for debugging purposes and !PM handling is often broken in drivers. I assume that it might be even better to enable PM for all Allwiner SoCs and remove !PM handling from all the affected drivers, like it was done for Tegra some time ago.
Maybe in the future :)
Best regards, Jernej
-- Best regards, Dmitry
On 8/20/22 3:25 AM, Jernej Škrabec wrote:
Dne petek, 19. avgust 2022 ob 17:37:20 CEST je Nicolas Dufresne napisal(a):
Le vendredi 19 août 2022 à 06:17 +0200, Jernej Škrabec a écrit :
Dne četrtek, 18. avgust 2022 ob 22:33:07 CEST je Nicolas Dufresne
napisal(a):
From: Dmitry Osipenko dmitry.osipenko@collabora.com
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe.
Does it even work without PM? Maybe it would be better if Cedrus would select PM in Kconfig.
I cannot comment myself on this, but it does not seem to invalidate this Dmitry's fix.
If NULL pointer dereference happens only when PM is disabled, then it does. I have PM always enabled and I never experienced above issue.
There's still a bug even with PM enabled: the v4l2 device is exposed to userspace, and therefore userspace could trigger a PM resume, before platform_set_drvdata() is called.
Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko dmitry.osipenko@collabora.com Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com
Please add a Fixes tag. With that:
Reviewed-by: Samuel Holland samuel@sholland.org
drivers/staging/media/sunxi/cedrus/cedrus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c index 960a0130cd620..55c54dfdc585c 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus.c @@ -448,6 +448,8 @@ static int cedrus_probe(struct platform_device *pdev)
if (!dev) return -ENOMEM;
- platform_set_drvdata(pdev, dev);
- dev->vfd = cedrus_video_device; dev->dev = &pdev->dev; dev->pdev = pdev;
@@ -521,8 +523,6 @@ static int cedrus_probe(struct platform_device *pdev)
goto err_m2m_mc;}
- platform_set_drvdata(pdev, dev);
- return 0;
err_m2m_mc:
Hi,
On Mon 22 Aug 22, 22:57, Samuel Holland wrote:
On 8/20/22 3:25 AM, Jernej Škrabec wrote:
Dne petek, 19. avgust 2022 ob 17:37:20 CEST je Nicolas Dufresne napisal(a):
Le vendredi 19 août 2022 à 06:17 +0200, Jernej Škrabec a écrit :
Dne četrtek, 18. avgust 2022 ob 22:33:07 CEST je Nicolas Dufresne
napisal(a):
From: Dmitry Osipenko dmitry.osipenko@collabora.com
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe.
Does it even work without PM? Maybe it would be better if Cedrus would select PM in Kconfig.
I cannot comment myself on this, but it does not seem to invalidate this Dmitry's fix.
If NULL pointer dereference happens only when PM is disabled, then it does. I have PM always enabled and I never experienced above issue.
There's still a bug even with PM enabled: the v4l2 device is exposed to userspace, and therefore userspace could trigger a PM resume, before platform_set_drvdata() is called.
Absolutely agreed!
Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko dmitry.osipenko@collabora.com Signed-off-by: Nicolas Dufresne nicolas.dufresne@collabora.com
Please add a Fixes tag. With that:
Reviewed-by: Samuel Holland samuel@sholland.org
Same here:
Acked-by: Paul Kocialkowski paul.kocialkowski@bootlin.com
Thanks!
Paul
drivers/staging/media/sunxi/cedrus/cedrus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c index 960a0130cd620..55c54dfdc585c 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus.c @@ -448,6 +448,8 @@ static int cedrus_probe(struct platform_device *pdev)
if (!dev) return -ENOMEM;
- platform_set_drvdata(pdev, dev);
- dev->vfd = cedrus_video_device; dev->dev = &pdev->dev; dev->pdev = pdev;
@@ -521,8 +523,6 @@ static int cedrus_probe(struct platform_device *pdev)
goto err_m2m_mc;}
- platform_set_drvdata(pdev, dev);
- return 0;
err_m2m_mc:
linux-stable-mirror@lists.linaro.org
-
Dmitry Osipenko -
Jernej Škrabec -
Nicolas Dufresne -
Paul Kocialkowski -
Samuel Holland