On Mon, Oct 22, 2018 at 11:44:22AM +0200, Torbjorn Jansson wrote:
On 2018-10-22 10:59, Sean Young wrote:
On Sat, Oct 20, 2018 at 11:12:16PM +0200, Hans Verkuil wrote:
Hi Sean,
Can you take a look at this, it appears to be an RC issue, see my analysis below.
On 10/20/2018 03:26 PM, Torbjorn Jansson wrote:
Hello
i'm using the pulse8 usb cec adapter to control my tv. i have a few scripts that poll the power status of my tv and after a while it stops working returning errors when trying to check if tv is on or off. this i think matches a kernel oops i'm seeing that i suspect is related to this.
i have sometimes been able to recover from this problem by completely cutting power to my tv and also unplugging the usb cec adapter. i have a feeling that the tv is at least partly to blame for cec-ctl not working but in any case there shouldn't be a kernel oops.
also every now and then i see this in dmesg: cec cec0: transmit: failed 05 cec cec0: transmit: failed 06 but that doesn't appear to do any harm as far as i can tell.
any idea whats causing the oops?
the ops:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P OE 4.18.12-200.fc28.x86_64 #1 Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018 Workqueue: events pulse8_irq_work_handler [pulse8_cec] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core]
Huh. ir_lirc_scancode_event() calls spin_lock_irqsave(&dev->lirc_fh_lock, flags);
The spinlock dev->lirc_fh_lock is initialized in ir_lirc_register(), which is called from rc_register_device(), except when the protocol is CEC:
/* Ensure that the lirc kfifo is setup before we start the thread */ if (dev->allowed_protocols != RC_PROTO_BIT_CEC) { rc = ir_lirc_register(dev); if (rc < 0) goto out_rx; }
So it looks like ir_lirc_scancode_event() fails because dev->lirc_fh_lock was never initialized.
Could this be fall-out from the lirc changes you did not too long ago?
Yes, this is broken. My bad, sorry. I think this must have been broken since v4.16. I can write a patch but I don't have a patch but I'm on the train to ELCE in Edinburgh now, with no hardware to test on.
Sean
the kernel oops have been happening for a while now. yesterday when i checked my logs i can see them at least back a couple of months when i was running 4.17
also my scripts to poll status of my tv and turn it on/off works for a while so it doesn't crash right away. maybe it only crashes when i send cec command to turn on/off tv and only polling for status is no problem.
i think i have a separate issue too because i had problems even before the kernel oopses started. but i suspect this is caused by my tv locking up the cec bus because unplugging power to tv for a few minutes (i must wait or it will still be just as broken) and then back used to resolve the cec errors from my scripts.
Would you be able to test the following patch please?
Thanks,
Sean ---
From 1b8b20b606b30c0e301c80e18af8d77194269bc1 Mon Sep 17 00:00:00 2001
From: Sean Young sean@mess.org Date: Mon, 22 Oct 2018 10:01:50 +0100 Subject: [PATCH] media: rc: cec devices do not have a lirc chardev MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit
This fixes an oops in ir_lirc_scancode_event().
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P OE 4.18.12-200.fc28.x86_64 #1 Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018 Workqueue: events pulse8_irq_work_handler [pulse8_cec] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core] Code: 8d ae b4 07 00 00 49 81 c6 b8 07 00 00 53 e8 4a df c3 d5 48 89 ef 49 89 45 00 e8 4e 84 41 d6 49 8b 1e 49 89 c4 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49 RSP: 0018:ffffaa10e3c07d58 EFLAGS: 00010017 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000018 RDX: 0000000000000001 RSI: 00316245397fa93c RDI: ffff966d31c8d7b4 RBP: ffff966d31c8d7b4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: ffffaa10e3c07e28 R12: 0000000000000002 R13: ffffaa10e3c07d88 R14: ffff966d31c8d7b8 R15: 0000000000000073 FS: 0000000000000000(0000) GS:ffff966d3f440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000009d820a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ir_do_keydown+0x75/0x260 [rc_core] rc_keydown+0x54/0xc0 [rc_core] cec_received_msg_ts+0xaa8/0xaf0 [cec] process_one_work+0x1a1/0x350 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Modules linked in: rc_tt_1500 dvb_usb_dvbsky dvb_usb_v2 uas usb_storage fuse vhost_net vhost tap xt_CHECKSUM iptable_mangle ip6t_REJECT nf_reject_ipv6 tun 8021q garp mrp xt_nat macvlan xfs devlink ebta si2157 si2168 cx25840 cx23885 kvm altera_ci tda18271 joydev ir_rc6_decoder rc_rc6_mce crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore altera_stapl m88ds3103 tveeprom cx2341 mxm_wmi igb crc32c_intel megaraid_sas dca i2c_algo_bit wmi vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio i2c_dev CR2: 0000000000000038
Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Sean Young sean@mess.org --- drivers/media/rc/rc-main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 552bbe82a160..877978dbd409 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -695,7 +695,8 @@ void rc_repeat(struct rc_dev *dev) (dev->last_toggle ? LIRC_SCANCODE_FLAG_TOGGLE : 0) };
- ir_lirc_scancode_event(dev, &sc); + if (dev->allowed_protocols != RC_PROTO_BIT_CEC) + ir_lirc_scancode_event(dev, &sc);
spin_lock_irqsave(&dev->keylock, flags);
@@ -735,7 +736,8 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol, .keycode = keycode };
- ir_lirc_scancode_event(dev, &sc); + if (dev->allowed_protocols != RC_PROTO_BIT_CEC) + ir_lirc_scancode_event(dev, &sc);
if (new_event && dev->keypressed) ir_do_keyup(dev, false);
On 10/22/2018 11:14 AM, Sean Young wrote:
On Mon, Oct 22, 2018 at 11:44:22AM +0200, Torbjorn Jansson wrote:
On 2018-10-22 10:59, Sean Young wrote:
On Sat, Oct 20, 2018 at 11:12:16PM +0200, Hans Verkuil wrote:
Hi Sean,
Can you take a look at this, it appears to be an RC issue, see my analysis below.
On 10/20/2018 03:26 PM, Torbjorn Jansson wrote:
Hello
i'm using the pulse8 usb cec adapter to control my tv. i have a few scripts that poll the power status of my tv and after a while it stops working returning errors when trying to check if tv is on or off. this i think matches a kernel oops i'm seeing that i suspect is related to this.
i have sometimes been able to recover from this problem by completely cutting power to my tv and also unplugging the usb cec adapter. i have a feeling that the tv is at least partly to blame for cec-ctl not working but in any case there shouldn't be a kernel oops.
also every now and then i see this in dmesg: cec cec0: transmit: failed 05 cec cec0: transmit: failed 06 but that doesn't appear to do any harm as far as i can tell.
any idea whats causing the oops?
the ops:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P OE 4.18.12-200.fc28.x86_64 #1 Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018 Workqueue: events pulse8_irq_work_handler [pulse8_cec] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core]
Huh. ir_lirc_scancode_event() calls spin_lock_irqsave(&dev->lirc_fh_lock, flags);
The spinlock dev->lirc_fh_lock is initialized in ir_lirc_register(), which is called from rc_register_device(), except when the protocol is CEC:
/* Ensure that the lirc kfifo is setup before we start the thread */ if (dev->allowed_protocols != RC_PROTO_BIT_CEC) { rc = ir_lirc_register(dev); if (rc < 0) goto out_rx; }
So it looks like ir_lirc_scancode_event() fails because dev->lirc_fh_lock was never initialized.
Could this be fall-out from the lirc changes you did not too long ago?
Yes, this is broken. My bad, sorry. I think this must have been broken since v4.16. I can write a patch but I don't have a patch but I'm on the train to ELCE in Edinburgh now, with no hardware to test on.
Sean
the kernel oops have been happening for a while now. yesterday when i checked my logs i can see them at least back a couple of months when i was running 4.17
also my scripts to poll status of my tv and turn it on/off works for a while so it doesn't crash right away. maybe it only crashes when i send cec command to turn on/off tv and only polling for status is no problem.
i think i have a separate issue too because i had problems even before the kernel oopses started. but i suspect this is caused by my tv locking up the cec bus because unplugging power to tv for a few minutes (i must wait or it will still be just as broken) and then back used to resolve the cec errors from my scripts.
Would you be able to test the following patch please?
Sean,
I think you should be able to test this with the vivid driver. Load the vivid driver, run:
cec-ctl --tv; cec-ctl -d1 --playback
Then:
cec-ctl -d1 -t0 --user-control-pressed ui-cmd=F5
That said, I tried this, but it doesn't crash for me, but perhaps I need to run some RC command first...
Regards,
Hans
Thanks,
Sean
From 1b8b20b606b30c0e301c80e18af8d77194269bc1 Mon Sep 17 00:00:00 2001 From: Sean Young sean@mess.org Date: Mon, 22 Oct 2018 10:01:50 +0100 Subject: [PATCH] media: rc: cec devices do not have a lirc chardev MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit
This fixes an oops in ir_lirc_scancode_event().
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P OE 4.18.12-200.fc28.x86_64 #1 Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018 Workqueue: events pulse8_irq_work_handler [pulse8_cec] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core] Code: 8d ae b4 07 00 00 49 81 c6 b8 07 00 00 53 e8 4a df c3 d5 48 89 ef 49 89 45 00 e8 4e 84 41 d6 49 8b 1e 49 89 c4 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49 RSP: 0018:ffffaa10e3c07d58 EFLAGS: 00010017 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000018 RDX: 0000000000000001 RSI: 00316245397fa93c RDI: ffff966d31c8d7b4 RBP: ffff966d31c8d7b4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: ffffaa10e3c07e28 R12: 0000000000000002 R13: ffffaa10e3c07d88 R14: ffff966d31c8d7b8 R15: 0000000000000073 FS: 0000000000000000(0000) GS:ffff966d3f440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000009d820a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ir_do_keydown+0x75/0x260 [rc_core] rc_keydown+0x54/0xc0 [rc_core] cec_received_msg_ts+0xaa8/0xaf0 [cec] process_one_work+0x1a1/0x350 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Modules linked in: rc_tt_1500 dvb_usb_dvbsky dvb_usb_v2 uas usb_storage fuse vhost_net vhost tap xt_CHECKSUM iptable_mangle ip6t_REJECT nf_reject_ipv6 tun 8021q garp mrp xt_nat macvlan xfs devlink ebta si2157 si2168 cx25840 cx23885 kvm altera_ci tda18271 joydev ir_rc6_decoder rc_rc6_mce crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore altera_stapl m88ds3103 tveeprom cx2341 mxm_wmi igb crc32c_intel megaraid_sas dca i2c_algo_bit wmi vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio i2c_dev CR2: 0000000000000038
Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Sean Young sean@mess.org
drivers/media/rc/rc-main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 552bbe82a160..877978dbd409 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -695,7 +695,8 @@ void rc_repeat(struct rc_dev *dev) (dev->last_toggle ? LIRC_SCANCODE_FLAG_TOGGLE : 0) };
- ir_lirc_scancode_event(dev, &sc);
- if (dev->allowed_protocols != RC_PROTO_BIT_CEC)
ir_lirc_scancode_event(dev, &sc);
spin_lock_irqsave(&dev->keylock, flags); @@ -735,7 +736,8 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol, .keycode = keycode };
- ir_lirc_scancode_event(dev, &sc);
- if (dev->allowed_protocols != RC_PROTO_BIT_CEC)
ir_lirc_scancode_event(dev, &sc);
if (new_event && dev->keypressed) ir_do_keyup(dev, false);
On Mon, Oct 22, 2018 at 12:30:29PM +0100, Hans Verkuil wrote:
On 10/22/2018 11:14 AM, Sean Young wrote:
On Mon, Oct 22, 2018 at 11:44:22AM +0200, Torbjorn Jansson wrote:
On 2018-10-22 10:59, Sean Young wrote:
On Sat, Oct 20, 2018 at 11:12:16PM +0200, Hans Verkuil wrote:
Hi Sean,
Can you take a look at this, it appears to be an RC issue, see my analysis below.
On 10/20/2018 03:26 PM, Torbjorn Jansson wrote:
Hello
i'm using the pulse8 usb cec adapter to control my tv. i have a few scripts that poll the power status of my tv and after a while it stops working returning errors when trying to check if tv is on or off. this i think matches a kernel oops i'm seeing that i suspect is related to this.
i have sometimes been able to recover from this problem by completely cutting power to my tv and also unplugging the usb cec adapter. i have a feeling that the tv is at least partly to blame for cec-ctl not working but in any case there shouldn't be a kernel oops.
also every now and then i see this in dmesg: cec cec0: transmit: failed 05 cec cec0: transmit: failed 06 but that doesn't appear to do any harm as far as i can tell.
any idea whats causing the oops?
the ops:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P OE 4.18.12-200.fc28.x86_64 #1 Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018 Workqueue: events pulse8_irq_work_handler [pulse8_cec] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core]
Huh. ir_lirc_scancode_event() calls spin_lock_irqsave(&dev->lirc_fh_lock, flags);
The spinlock dev->lirc_fh_lock is initialized in ir_lirc_register(), which is called from rc_register_device(), except when the protocol is CEC:
/* Ensure that the lirc kfifo is setup before we start the thread */ if (dev->allowed_protocols != RC_PROTO_BIT_CEC) { rc = ir_lirc_register(dev); if (rc < 0) goto out_rx; }
So it looks like ir_lirc_scancode_event() fails because dev->lirc_fh_lock was never initialized.
Could this be fall-out from the lirc changes you did not too long ago?
Yes, this is broken. My bad, sorry. I think this must have been broken since v4.16. I can write a patch but I don't have a patch but I'm on the train to ELCE in Edinburgh now, with no hardware to test on.
Sean
the kernel oops have been happening for a while now. yesterday when i checked my logs i can see them at least back a couple of months when i was running 4.17
also my scripts to poll status of my tv and turn it on/off works for a while so it doesn't crash right away. maybe it only crashes when i send cec command to turn on/off tv and only polling for status is no problem.
i think i have a separate issue too because i had problems even before the kernel oopses started. but i suspect this is caused by my tv locking up the cec bus because unplugging power to tv for a few minutes (i must wait or it will still be just as broken) and then back used to resolve the cec errors from my scripts.
Would you be able to test the following patch please?
Sean,
I think you should be able to test this with the vivid driver. Load the vivid driver, run:
cec-ctl --tv; cec-ctl -d1 --playback
Then:
cec-ctl -d1 -t0 --user-control-pressed ui-cmd=F5
Ah, thanks. That will help with testing/reproducing.
That said, I tried this, but it doesn't crash for me, but perhaps I need to run some RC command first...
Hmm I think those commands should be enough. It probably needs CONFIG_DEBUG_SPINLOCK to detect the uninitialized spinlock. I'm trying it now.
Thanks,
Sean
On 2018-10-22 14:28, Sean Young wrote:
On Mon, Oct 22, 2018 at 12:30:29PM +0100, Hans Verkuil wrote:
On 10/22/2018 11:14 AM, Sean Young wrote:
On Mon, Oct 22, 2018 at 11:44:22AM +0200, Torbjorn Jansson wrote:
On 2018-10-22 10:59, Sean Young wrote:
On Sat, Oct 20, 2018 at 11:12:16PM +0200, Hans Verkuil wrote:
Hi Sean,
Can you take a look at this, it appears to be an RC issue, see my analysis below.
On 10/20/2018 03:26 PM, Torbjorn Jansson wrote: > Hello > > i'm using the pulse8 usb cec adapter to control my tv. > i have a few scripts that poll the power status of my tv and after a while it stops working returning errors when trying to check if tv is on or off. > this i think matches a kernel oops i'm seeing that i suspect is related to this. > > i have sometimes been able to recover from this problem by completely cutting power to my tv and also unplugging the usb cec adapter. > i have a feeling that the tv is at least partly to blame for cec-ctl not working but in any case there shouldn't be a kernel oops. > > > also every now and then i see this in dmesg: > cec cec0: transmit: failed 05 > cec cec0: transmit: failed 06 > but that doesn't appear to do any harm as far as i can tell. > > any idea whats causing the oops? > > the ops: > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 > PGD 0 P4D 0 > Oops: 0000 [#1] SMP PTI > CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P OE 4.18.12-200.fc28.x86_64 #1 > Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018 > Workqueue: events pulse8_irq_work_handler [pulse8_cec] > RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core]
Huh. ir_lirc_scancode_event() calls spin_lock_irqsave(&dev->lirc_fh_lock, flags);
The spinlock dev->lirc_fh_lock is initialized in ir_lirc_register(), which is called from rc_register_device(), except when the protocol is CEC:
/* Ensure that the lirc kfifo is setup before we start the thread */ if (dev->allowed_protocols != RC_PROTO_BIT_CEC) { rc = ir_lirc_register(dev); if (rc < 0) goto out_rx; }
So it looks like ir_lirc_scancode_event() fails because dev->lirc_fh_lock was never initialized.
Could this be fall-out from the lirc changes you did not too long ago?
Yes, this is broken. My bad, sorry. I think this must have been broken since v4.16. I can write a patch but I don't have a patch but I'm on the train to ELCE in Edinburgh now, with no hardware to test on.
Sean
the kernel oops have been happening for a while now. yesterday when i checked my logs i can see them at least back a couple of months when i was running 4.17
also my scripts to poll status of my tv and turn it on/off works for a while so it doesn't crash right away. maybe it only crashes when i send cec command to turn on/off tv and only polling for status is no problem.
i think i have a separate issue too because i had problems even before the kernel oopses started. but i suspect this is caused by my tv locking up the cec bus because unplugging power to tv for a few minutes (i must wait or it will still be just as broken) and then back used to resolve the cec errors from my scripts.
Would you be able to test the following patch please?
Sean,
I think you should be able to test this with the vivid driver. Load the vivid driver, run:
cec-ctl --tv; cec-ctl -d1 --playback
Then:
cec-ctl -d1 -t0 --user-control-pressed ui-cmd=F5
Ah, thanks. That will help with testing/reproducing.
That said, I tried this, but it doesn't crash for me, but perhaps I need to run some RC command first...
Hmm I think those commands should be enough. It probably needs CONFIG_DEBUG_SPINLOCK to detect the uninitialized spinlock. I'm trying it now.
Thanks,
Sean
FYI the commands i run is as follows.
getting status, this is run frequently several times per minute (once every 10 or 15 seconds): cec-ctl --to=0 --give-device-power-status
then when i want to power on or off this is run: cec-ctl --to=0 --image-view-on or cec-ctl --to=0 --standby
it usually takes day or two before i get a kernel oops. but i haven't studied super closely when exactly the oops happens in relation to what commands i sent since by now I'm used to it not working most of the time.
On Mon, Oct 22, 2018 at 01:28:42PM +0100, Sean Young wrote:
On Mon, Oct 22, 2018 at 12:30:29PM +0100, Hans Verkuil wrote:
On 10/22/2018 11:14 AM, Sean Young wrote:
Would you be able to test the following patch please?
Sean,
I think you should be able to test this with the vivid driver. Load the vivid driver, run:
cec-ctl --tv; cec-ctl -d1 --playback
Then:
cec-ctl -d1 -t0 --user-control-pressed ui-cmd=F5
Ah, thanks. That will help with testing/reproducing.
That said, I tried this, but it doesn't crash for me, but perhaps I need to run some RC command first...
Hmm I think those commands should be enough. It probably needs CONFIG_DEBUG_SPINLOCK to detect the uninitialized spinlock. I'm trying it now.
Yes, that turned out to work. With CONFIG_DEBUG_SPINLOCK on, it goes bang every time. With the patch, the problem goes away.
Without CONFIG_DEBUG_SPINLOCK we're going into undefined behaviour, so Torbjorn you're only seeing the oops occassionally (and which is why it has not been observed or reported before).
Thanks,
Sean
On 2018-10-22 15:17, Sean Young wrote:
On Mon, Oct 22, 2018 at 01:28:42PM +0100, Sean Young wrote:
On Mon, Oct 22, 2018 at 12:30:29PM +0100, Hans Verkuil wrote:
On 10/22/2018 11:14 AM, Sean Young wrote:
Would you be able to test the following patch please?
Sean,
I think you should be able to test this with the vivid driver. Load the vivid driver, run:
cec-ctl --tv; cec-ctl -d1 --playback
Then:
cec-ctl -d1 -t0 --user-control-pressed ui-cmd=F5
Ah, thanks. That will help with testing/reproducing.
That said, I tried this, but it doesn't crash for me, but perhaps I need to run some RC command first...
Hmm I think those commands should be enough. It probably needs CONFIG_DEBUG_SPINLOCK to detect the uninitialized spinlock. I'm trying it now.
Yes, that turned out to work. With CONFIG_DEBUG_SPINLOCK on, it goes bang every time. With the patch, the problem goes away.
Without CONFIG_DEBUG_SPINLOCK we're going into undefined behaviour, so Torbjorn you're only seeing the oops occassionally (and which is why it has not been observed or reported before).
Thanks,
Sean
FYI i have tested this patch for a while now and have not seen any more kernel oops. So it appears to be working.
linux-stable-mirror@lists.linaro.org