From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com

[ Upstream commit 3ee9a76a8c5a10e1bfb04b81db767c6d562ddaf3 ]

commit 4d230d12710646 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") fixuped clock start timing. But it exchanged clock start checker from ssi->usrcnt to ssi->rate.

Current rsnd_ssi_master_clk_start() is called from .prepare, but some player (for example GStreamer) might calls it many times. In such case, the checker might returns error even though it was not error. It should check ssi->usrcnt instead of ssi->rate. This patch fixup it. Without this patch, GStreamer can't switch 48kHz / 44.1kHz.

Reported-by: Yusuke Goda yusuke.goda.sx@renesas.com Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Tested-by: Yusuke Goda yusuke.goda.sx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rcar/ssi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 34223c8c28a8..0db2791f7035 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -280,7 +280,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod, if (rsnd_ssi_is_multi_slave(mod, io)) return 0;

- if (ssi->rate) { + if (ssi->usrcnt > 1) { if (ssi->rate != rate) { dev_err(dev, "SSI parent/child should use same rate\n"); return -EINVAL;

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit c3e43d8b958bd6849817393483e805d8638a8ab7 ]

We return 0 unconditionally in 'rtw_wx_read32()'. However, 'ret' is set to some error codes in several error handling paths.

Return 'ret' instead to propagate the error code.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c index d5e5f830f2a1..1b61da61690b 100644 --- a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c +++ b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c @@ -2383,7 +2383,7 @@ static int rtw_wx_read32(struct net_device *dev, exit: kfree(ptmp);

- return 0; + return ret; }

static int rtw_wx_write32(struct net_device *dev,

From: Janusz Krzysztofik jmkrzyszt@gmail.com

[ Upstream commit cec83ff1241ec98113a19385ea9e9cfa9aa4125b ]

While playing with initialization order of modem device, it has been discovered that under some circumstances (early console init, I believe) its .pm() callback may be called before the uart_port->private_data pointer is initialized from plat_serial8250_port->private_data, resulting in NULL pointer dereference. Fix it by checking for uninitialized pointer before using it in modem_pm().

Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API") Signed-off-by: Janusz Krzysztofik jmkrzyszt@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap1/board-ams-delta.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 6cbc69c92913..4174fa86bfb1 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -512,6 +512,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) struct modem_private_data *priv = port->private_data; int ret;

+ if (!priv) + return; + if (IS_ERR(priv->regulator)) return;

From: Florian Westphal fw@strlen.de

[ Upstream commit 25d8bcedbf4329895dbaf9dd67baa6f18dad918c ]

Start flood ping for each cpu while loading/flushing rulesets to make sure we do not access already-free'd rules from nf_tables evaluation loop.

Also add this to TARGETS so 'make run_tests' in selftest dir runs it automatically.

This would have caught the bug fixed in previous change ("netfilter: nf_tables: do not skip inactive chains during generation update") sooner.

Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/netfilter/Makefile | 6 ++ tools/testing/selftests/netfilter/config | 2 + .../selftests/netfilter/nft_trans_stress.sh | 78 +++++++++++++++++++ 4 files changed, 87 insertions(+) create mode 100644 tools/testing/selftests/netfilter/Makefile create mode 100644 tools/testing/selftests/netfilter/config create mode 100755 tools/testing/selftests/netfilter/nft_trans_stress.sh

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index ea300e7818a7..10b89f5b9af7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -20,6 +20,7 @@ TARGETS += memory-hotplug TARGETS += mount TARGETS += mqueue TARGETS += net +TARGETS += netfilter TARGETS += nsfs TARGETS += powerpc TARGETS += pstore diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile new file mode 100644 index 000000000000..47ed6cef93fb --- /dev/null +++ b/tools/testing/selftests/netfilter/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for netfilter selftests + +TEST_PROGS := nft_trans_stress.sh + +include ../lib.mk diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config new file mode 100644 index 000000000000..1017313e41a8 --- /dev/null +++ b/tools/testing/selftests/netfilter/config @@ -0,0 +1,2 @@ +CONFIG_NET_NS=y +NF_TABLES_INET=y diff --git a/tools/testing/selftests/netfilter/nft_trans_stress.sh b/tools/testing/selftests/netfilter/nft_trans_stress.sh new file mode 100755 index 000000000000..f1affd12c4b1 --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_trans_stress.sh @@ -0,0 +1,78 @@ +#!/bin/bash +# +# This test is for stress-testing the nf_tables config plane path vs. +# packet path processing: Make sure we never release rules that are +# still visible to other cpus. +# +# set -e + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +testns=testns1 +tables="foo bar baz quux" + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +tmp=$(mktemp) + +for table in $tables; do + echo add table inet "$table" >> "$tmp" + echo flush table inet "$table" >> "$tmp" + + echo "add chain inet $table INPUT { type filter hook input priority 0; }" >> "$tmp" + echo "add chain inet $table OUTPUT { type filter hook output priority 0; }" >> "$tmp" + for c in $(seq 1 400); do + chain=$(printf "chain%03u" "$c") + echo "add chain inet $table $chain" >> "$tmp" + done + + for c in $(seq 1 400); do + chain=$(printf "chain%03u" "$c") + for BASE in INPUT OUTPUT; do + echo "add rule inet $table $BASE counter jump $chain" >> "$tmp" + done + echo "add rule inet $table $chain counter return" >> "$tmp" + done +done + +ip netns add "$testns" +ip -netns "$testns" link set lo up + +lscpu | grep ^CPU(s): | ( read cpu cpunum ; +cpunum=$((cpunum-1)) +for i in $(seq 0 $cpunum);do + mask=$(printf 0x%x $((1<<$i))) + ip netns exec "$testns" taskset $mask ping -4 127.0.0.1 -fq > /dev/null & + ip netns exec "$testns" taskset $mask ping -6 ::1 -fq > /dev/null & +done) + +sleep 1 + +for i in $(seq 1 10) ; do ip netns exec "$testns" nft -f "$tmp" & done + +for table in $tables;do + randsleep=$((RANDOM%10)) + sleep $randsleep + ip netns exec "$testns" nft delete table inet $table 2>/dev/null +done + +randsleep=$((RANDOM%10)) +sleep $randsleep + +pkill -9 ping + +wait + +rm -f "$tmp" +ip netns del "$testns"

From: Nicolin Chen nicoleotsuka@gmail.com

[ Upstream commit 70df9ebbd82c794ddfbb49d45b337f18d5588dc2 ]

When using DT configurations, the id pointer might turn out to be NULL. Then the driver encounters NULL pointer access:

Unable to handle kernel read from unreadable memory at vaddr 00000018 [...] PC is at ina2xx_probe+0x114/0x200 LR is at ina2xx_probe+0x10c/0x200 [...] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

The reason is that i2c core returns the id pointer by matching id_table with client->name, while the client->name is actually using the name from the first string in the DT compatible list, not the best one. So i2c core would fail to match the id_table if the best matched compatible string isn't the first one, and then would return a NULL id pointer.

This probably should be fixed in i2c core. But it doesn't hurt to make the driver robust. So this patch fixes it by using the "chip" that's added to unify both DT and non-DT configurations.

Additionally, since id pointer could be null, so as id->name: ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm) ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm)

So this patch also fixes NULL name pointer, using client->name to play safe and to align with hwmon->name.

Fixes: bd0ddd4d0883 ("hwmon: (ina2xx) Add OF device ID table") Signed-off-by: Nicolin Chen nicoleotsuka@gmail.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/ina2xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 71d3445ba869..c2252cf452f5 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -491,7 +491,7 @@ static int ina2xx_probe(struct i2c_client *client, }

data->groups[group++] = &ina2xx_group; - if (id->driver_data == ina226) + if (chip == ina226) data->groups[group++] = &ina226_group;

hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, @@ -500,7 +500,7 @@ static int ina2xx_probe(struct i2c_client *client, return PTR_ERR(hwmon_dev);

dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n", - id->name, data->rshunt); + client->name, data->rshunt);

return 0; }

From: Thomas Richter tmricht@linux.ibm.com

[ Upstream commit 613a41b0d16e617f46776a93b975a1eeea96417c ]

On s390 command perf top fails [root@s35lp76 perf] # ./perf top -F100000 --stdio Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' [root@s35lp76 perf] #

Using event -e rb0000 works as designed. Event rb0000 is the event number of the sampling facility for basic sampling.

During system start up the following PMUs are installed in the kernel's PMU list (from head to tail): cpum_cf --> s390 PMU counter facility device driver cpum_sf --> s390 PMU sampling facility device driver uprobe kprobe tracepoint task_clock cpu_clock

Perf top executes following functions and calls perf_event_open(2) system call with different parameters many times:

cmd_top --> __cmd_top --> perf_evlist__add_default --> __perf_evlist__add_default --> perf_evlist__new_cycles (creates event type:0 (HW) config 0 (CPU_CYCLES) --> perf_event_attr__set_max_precise_ip Uses perf_event_open(2) to detect correct precise_ip level. Fails 3 times on s390 which is ok.

Then functions cmd_top --> __cmd_top --> perf_top__start_counters -->perf_evlist__config --> perf_can_comm_exec --> perf_probe_api This functions test support for the following events: "cycles:u", "instructions:u", "cpu-clock:u" using --> perf_do_probe_api --> perf_event_open_cloexec Test the close on exec flag support with perf_event_open(2). perf_do_probe_api returns true if the event is supported. The function returns true because event cpu-clock is supported by the PMU cpu_clock. This is achieved by many calls to perf_event_open(2).

Function perf_top__start_counters now calls perf_evsel__open() for every event, which is the default event cpu_cycles (config:0) and type HARDWARE (type:0) which a predfined frequence of 4000.

Given the above order of the PMU list, the PMU cpum_cf gets called first and returns 0, which indicates support for this sampling. The event is fully allocated in the function perf_event_open (file kernel/event/core.c near line 10521 and the following check fails:

event = perf_event_alloc(&attr, cpu, task, group_leader, NULL, NULL, NULL, cgroup_fd); if (IS_ERR(event)) { err = PTR_ERR(event); goto err_cred; }

if (is_sampling_event(event)) { if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) { err = -EOPNOTSUPP; goto err_alloc; } }

The check for the interrupt capabilities fails and the system call perf_event_open() returns -EOPNOTSUPP (-95).

Add a check to return -ENODEV when sampling is requested in PMU cpum_cf. This allows common kernel code in the perf_event_open() system call to test the next PMU in above list.

Fixes: 97b1198fece0 (" "s390, perf: Use common PMU interrupt disabled code") Signed-off-by: Thomas Richter tmricht@linux.ibm.com Reviewed-by: Hendrik Brueckner brueckner@linux.ibm.com Signed-off-by: Martin Schwidefsky schwidefsky@de.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/perf_cpum_cf.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index 61e91fee8467..edf6a61f0a64 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -349,6 +349,8 @@ static int __hw_perf_event_init(struct perf_event *event) break;

case PERF_TYPE_HARDWARE: + if (is_sampling_event(event)) /* No sampling support */ + return -ENOENT; ev = attr->config; /* Count user space (problem-state) only */ if (!attr->exclude_user && attr->exclude_kernel) {

From: Peter Ujfalusi peter.ujfalusi@ti.com

[ Upstream commit 76836fd354922ebe4798a64fda01f8dc6a8b0984 ]

The machine driver fails to probe in next-20181113 with:

[ 2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered [ 2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517 ... [ 3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040 [ 3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040 [ 3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22 [ 3.715148] omap-abe-twl6040: probe of sound failed with error -22

Bisect pointed to a merge commit: first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master'

and a diff between a working kernel does not reveal anything which would explain the change in behavior.

Further investigation showed that on the second try of loading fails because the dai_link->platform is no longer NULL and it might be pointing to uninitialized memory.

The fix is to move the snd_soc_dai_link and snd_soc_card inside of the abe_twl6040 struct, which is dynamically allocated every time the driver probes.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/omap/omap-abe-twl6040.c | 67 +++++++++++++------------------ 1 file changed, 29 insertions(+), 38 deletions(-)

diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c index 614b18d2f631..6fd143799534 100644 --- a/sound/soc/omap/omap-abe-twl6040.c +++ b/sound/soc/omap/omap-abe-twl6040.c @@ -36,6 +36,8 @@ #include "../codecs/twl6040.h"

struct abe_twl6040 { + struct snd_soc_card card; + struct snd_soc_dai_link dai_links[2]; int jack_detection; /* board can detect jack events */ int mclk_freq; /* MCLK frequency speed for twl6040 */ }; @@ -208,40 +210,10 @@ static int omap_abe_dmic_init(struct snd_soc_pcm_runtime *rtd) ARRAY_SIZE(dmic_audio_map)); }

-/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link abe_twl6040_dai_links[] = { - { - .name = "TWL6040", - .stream_name = "TWL6040", - .codec_dai_name = "twl6040-legacy", - .codec_name = "twl6040-codec", - .init = omap_abe_twl6040_init, - .ops = &omap_abe_ops, - }, - { - .name = "DMIC", - .stream_name = "DMIC Capture", - .codec_dai_name = "dmic-hifi", - .codec_name = "dmic-codec", - .init = omap_abe_dmic_init, - .ops = &omap_abe_dmic_ops, - }, -}; - -/* Audio machine driver */ -static struct snd_soc_card omap_abe_card = { - .owner = THIS_MODULE, - - .dapm_widgets = twl6040_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets), - .dapm_routes = audio_map, - .num_dapm_routes = ARRAY_SIZE(audio_map), -}; - static int omap_abe_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; - struct snd_soc_card *card = &omap_abe_card; + struct snd_soc_card *card; struct device_node *dai_node; struct abe_twl6040 *priv; int num_links = 0; @@ -252,12 +224,18 @@ static int omap_abe_probe(struct platform_device *pdev) return -ENODEV; }

- card->dev = &pdev->dev; - priv = devm_kzalloc(&pdev->dev, sizeof(struct abe_twl6040), GFP_KERNEL); if (priv == NULL) return -ENOMEM;

+ card = &priv->card; + card->dev = &pdev->dev; + card->owner = THIS_MODULE; + card->dapm_widgets = twl6040_dapm_widgets; + card->num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets); + card->dapm_routes = audio_map; + card->num_dapm_routes = ARRAY_SIZE(audio_map); + if (snd_soc_of_parse_card_name(card, "ti,model")) { dev_err(&pdev->dev, "Card name is not provided\n"); return -ENODEV; @@ -274,14 +252,27 @@ static int omap_abe_probe(struct platform_device *pdev) dev_err(&pdev->dev, "McPDM node is not provided\n"); return -EINVAL; } - abe_twl6040_dai_links[0].cpu_of_node = dai_node; - abe_twl6040_dai_links[0].platform_of_node = dai_node; + + priv->dai_links[0].name = "DMIC"; + priv->dai_links[0].stream_name = "TWL6040"; + priv->dai_links[0].cpu_of_node = dai_node; + priv->dai_links[0].platform_of_node = dai_node; + priv->dai_links[0].codec_dai_name = "twl6040-legacy"; + priv->dai_links[0].codec_name = "twl6040-codec"; + priv->dai_links[0].init = omap_abe_twl6040_init; + priv->dai_links[0].ops = &omap_abe_ops;

dai_node = of_parse_phandle(node, "ti,dmic", 0); if (dai_node) { num_links = 2; - abe_twl6040_dai_links[1].cpu_of_node = dai_node; - abe_twl6040_dai_links[1].platform_of_node = dai_node; + priv->dai_links[1].name = "TWL6040"; + priv->dai_links[1].stream_name = "DMIC Capture"; + priv->dai_links[1].cpu_of_node = dai_node; + priv->dai_links[1].platform_of_node = dai_node; + priv->dai_links[1].codec_dai_name = "dmic-hifi"; + priv->dai_links[1].codec_name = "dmic-codec"; + priv->dai_links[1].init = omap_abe_dmic_init; + priv->dai_links[1].ops = &omap_abe_dmic_ops; } else { num_links = 1; } @@ -300,7 +291,7 @@ static int omap_abe_probe(struct platform_device *pdev) return -ENODEV; }

- card->dai_link = abe_twl6040_dai_links; + card->dai_link = priv->dai_links; card->num_links = num_links;

snd_soc_card_set_drvdata(card, priv);

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 0145b50566e7de5637e80ecba96c7f0e6fff1aad ]

Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer.

This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this.

While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability.

Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Acked-by: Benjamin Tissoires benjamin.tissoires@redhat.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-sensor-custom.c | 2 +- drivers/hid/hid-sensor-hub.c | 13 ++++++++++--- drivers/iio/accel/hid-sensor-accel-3d.c | 5 ++++- drivers/iio/gyro/hid-sensor-gyro-3d.c | 5 ++++- drivers/iio/humidity/hid-sensor-humidity.c | 3 ++- drivers/iio/light/hid-sensor-als.c | 8 +++++--- drivers/iio/light/hid-sensor-prox.c | 8 +++++--- drivers/iio/magnetometer/hid-sensor-magn-3d.c | 8 +++++--- drivers/iio/orientation/hid-sensor-incl-3d.c | 8 +++++--- drivers/iio/pressure/hid-sensor-press.c | 8 +++++--- drivers/iio/temperature/hid-sensor-temperature.c | 3 ++- drivers/rtc/rtc-hid-sensor-time.c | 2 +- include/linux/hid-sensor-hub.h | 4 +++- 13 files changed, 52 insertions(+), 25 deletions(-)

diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c index 0bcf041368c7..574126b649e9 100644 --- a/drivers/hid/hid-sensor-custom.c +++ b/drivers/hid/hid-sensor-custom.c @@ -358,7 +358,7 @@ static ssize_t show_value(struct device *dev, struct device_attribute *attr, sensor_inst->hsdev, sensor_inst->hsdev->usage, usage, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, false); } else if (!strncmp(name, "units", strlen("units"))) value = sensor_inst->fields[field_index].attribute.units; else if (!strncmp(name, "unit-expo", strlen("unit-expo"))) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index faba542d1b07..b5bd5cb7d532 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -299,7 +299,8 @@ EXPORT_SYMBOL_GPL(sensor_hub_get_feature); int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, u32 usage_id, u32 attr_usage_id, u32 report_id, - enum sensor_hub_read_flags flag) + enum sensor_hub_read_flags flag, + bool is_signed) { struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev); unsigned long flags; @@ -331,10 +332,16 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, &hsdev->pending.ready, HZ*5); switch (hsdev->pending.raw_size) { case 1: - ret_val = *(u8 *)hsdev->pending.raw_data; + if (is_signed) + ret_val = *(s8 *)hsdev->pending.raw_data; + else + ret_val = *(u8 *)hsdev->pending.raw_data; break; case 2: - ret_val = *(u16 *)hsdev->pending.raw_data; + if (is_signed) + ret_val = *(s16 *)hsdev->pending.raw_data; + else + ret_val = *(u16 *)hsdev->pending.raw_data; break; case 4: ret_val = *(u32 *)hsdev->pending.raw_data; diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index 2238a26aba63..f573d9c61fc3 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -149,6 +149,7 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min; struct hid_sensor_hub_device *hsdev = accel_state->common_attributes.hsdev;

@@ -158,12 +159,14 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, case 0: hid_sensor_power_state(&accel_state->common_attributes, true); report_id = accel_state->accel[chan->scan_index].report_id; + min = accel_state->accel[chan->scan_index].logical_minimum; address = accel_3d_addresses[chan->scan_index]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( accel_state->common_attributes.hsdev, hsdev->usage, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); else { *val = 0; hid_sensor_power_state(&accel_state->common_attributes, diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index c67ce2ac4715..d9192eb41131 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -111,6 +111,7 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;

*val = 0; *val2 = 0; @@ -118,13 +119,15 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev, case 0: hid_sensor_power_state(&gyro_state->common_attributes, true); report_id = gyro_state->gyro[chan->scan_index].report_id; + min = gyro_state->gyro[chan->scan_index].logical_minimum; address = gyro_3d_addresses[chan->scan_index]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( gyro_state->common_attributes.hsdev, HID_USAGE_SENSOR_GYRO_3D, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); else { *val = 0; hid_sensor_power_state(&gyro_state->common_attributes, diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c index 6e09c1acfe51..e53914d51ec3 100644 --- a/drivers/iio/humidity/hid-sensor-humidity.c +++ b/drivers/iio/humidity/hid-sensor-humidity.c @@ -75,7 +75,8 @@ static int humidity_read_raw(struct iio_dev *indio_dev, HID_USAGE_SENSOR_HUMIDITY, HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY, humid_st->humidity_attr.report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + humid_st->humidity_attr.logical_minimum < 0); hid_sensor_power_state(&humid_st->common_attributes, false);

return IIO_VAL_INT; diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index 059d964772c7..95ca86f50434 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -93,6 +93,7 @@ static int als_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;

*val = 0; *val2 = 0; @@ -102,8 +103,8 @@ static int als_read_raw(struct iio_dev *indio_dev, case CHANNEL_SCAN_INDEX_INTENSITY: case CHANNEL_SCAN_INDEX_ILLUM: report_id = als_state->als_illum.report_id; - address = - HID_USAGE_SENSOR_LIGHT_ILLUM; + min = als_state->als_illum.logical_minimum; + address = HID_USAGE_SENSOR_LIGHT_ILLUM; break; default: report_id = -1; @@ -116,7 +117,8 @@ static int als_read_raw(struct iio_dev *indio_dev, als_state->common_attributes.hsdev, HID_USAGE_SENSOR_ALS, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); hid_sensor_power_state(&als_state->common_attributes, false); } else { diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index 73fced8a63b7..8c017abc4ee2 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -73,6 +73,7 @@ static int prox_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;

*val = 0; *val2 = 0; @@ -81,8 +82,8 @@ static int prox_read_raw(struct iio_dev *indio_dev, switch (chan->scan_index) { case CHANNEL_SCAN_INDEX_PRESENCE: report_id = prox_state->prox_attr.report_id; - address = - HID_USAGE_SENSOR_HUMAN_PRESENCE; + min = prox_state->prox_attr.logical_minimum; + address = HID_USAGE_SENSOR_HUMAN_PRESENCE; break; default: report_id = -1; @@ -95,7 +96,8 @@ static int prox_read_raw(struct iio_dev *indio_dev, prox_state->common_attributes.hsdev, HID_USAGE_SENSOR_PROX, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); hid_sensor_power_state(&prox_state->common_attributes, false); } else { diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index 0e791b02ed4a..b495107bd173 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -163,21 +163,23 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;

*val = 0; *val2 = 0; switch (mask) { case 0: hid_sensor_power_state(&magn_state->magn_flux_attributes, true); - report_id = - magn_state->magn[chan->address].report_id; + report_id = magn_state->magn[chan->address].report_id; + min = magn_state->magn[chan->address].logical_minimum; address = magn_3d_addresses[chan->address]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( magn_state->magn_flux_attributes.hsdev, HID_USAGE_SENSOR_COMPASS_3D, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); else { *val = 0; hid_sensor_power_state( diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c index fd1b3696ee42..16c744bef021 100644 --- a/drivers/iio/orientation/hid-sensor-incl-3d.c +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c @@ -111,21 +111,23 @@ static int incl_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;

*val = 0; *val2 = 0; switch (mask) { case IIO_CHAN_INFO_RAW: hid_sensor_power_state(&incl_state->common_attributes, true); - report_id = - incl_state->incl[chan->scan_index].report_id; + report_id = incl_state->incl[chan->scan_index].report_id; + min = incl_state->incl[chan->scan_index].logical_minimum; address = incl_3d_addresses[chan->scan_index]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( incl_state->common_attributes.hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); else { hid_sensor_power_state(&incl_state->common_attributes, false); diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index 6848d8c80eff..1c49ef78f888 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -77,6 +77,7 @@ static int press_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;

*val = 0; *val2 = 0; @@ -85,8 +86,8 @@ static int press_read_raw(struct iio_dev *indio_dev, switch (chan->scan_index) { case CHANNEL_SCAN_INDEX_PRESSURE: report_id = press_state->press_attr.report_id; - address = - HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE; + min = press_state->press_attr.logical_minimum; + address = HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE; break; default: report_id = -1; @@ -99,7 +100,8 @@ static int press_read_raw(struct iio_dev *indio_dev, press_state->common_attributes.hsdev, HID_USAGE_SENSOR_PRESSURE, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); hid_sensor_power_state(&press_state->common_attributes, false); } else { diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c index c01efeca4002..6ed5cd5742f1 100644 --- a/drivers/iio/temperature/hid-sensor-temperature.c +++ b/drivers/iio/temperature/hid-sensor-temperature.c @@ -76,7 +76,8 @@ static int temperature_read_raw(struct iio_dev *indio_dev, HID_USAGE_SENSOR_TEMPERATURE, HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE, temp_st->temperature_attr.report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + temp_st->temperature_attr.logical_minimum < 0); hid_sensor_power_state( &temp_st->common_attributes, false); diff --git a/drivers/rtc/rtc-hid-sensor-time.c b/drivers/rtc/rtc-hid-sensor-time.c index 2751dba850c6..3e1abb455472 100644 --- a/drivers/rtc/rtc-hid-sensor-time.c +++ b/drivers/rtc/rtc-hid-sensor-time.c @@ -213,7 +213,7 @@ static int hid_rtc_read_time(struct device *dev, struct rtc_time *tm) /* get a report with all values through requesting one value */ sensor_hub_input_attr_get_raw_value(time_state->common_attributes.hsdev, HID_USAGE_SENSOR_TIME, hid_time_addresses[0], - time_state->info[0].report_id, SENSOR_HUB_SYNC); + time_state->info[0].report_id, SENSOR_HUB_SYNC, false); /* wait for all values (event) */ ret = wait_for_completion_killable_timeout( &time_state->comp_last_time, HZ*6); diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index fc7aae64dcde..000de6da3b1b 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -177,6 +177,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev, * @attr_usage_id: Attribute usage id as per spec * @report_id: Report id to look for * @flag: Synchronous or asynchronous read +* @is_signed: If true then fields < 32 bits will be sign-extended * * Issues a synchronous or asynchronous read request for an input attribute. * Returns data upto 32 bits. @@ -190,7 +191,8 @@ enum sensor_hub_read_flags { int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, u32 usage_id, u32 attr_usage_id, u32 report_id, - enum sensor_hub_read_flags flag + enum sensor_hub_read_flags flag, + bool is_signed );

/**

From: Huacai Chen chenhc@lemote.com

[ Upstream commit 09aaf6813cfca4c18034fda7a43e68763f34abb1 ]

Both datasheet and comments of store_temp_mode() tell us that temp1~4_type is writable, so fix it.

Signed-off-by: Yao Wang wangyao@lemote.com Signed-off-by: Huacai Chen chenhc@lemote.com Fixes: 39deb6993e7c (" hwmon: (w83795) Simplify temperature sensor type handling") Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/w83795.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index 49276bbdac3d..1bb80f992aa8 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -1691,7 +1691,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, * somewhere else in the code */ #define SENSOR_ATTR_TEMP(index) { \ - SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \ + SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \ show_temp_mode, store_temp_mode, NOT_USED, index - 1), \ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \ NULL, TEMP_READ, index - 1), \

From: Trent Piepho tpiepho@impinj.com

[ Upstream commit 68bc10bf992180f269816ff3d22eb30383138577 ]

This bug was introduced in the interaction for two commits on either branch of the merge commit 562df5c8521e ("Merge branch 'pci/host-designware' into next").

Commit 4d107d3b5a68 ("PCI: imx6: Move link up check into imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll the link status register directly, checking for link up and not training, and made imx6_pcie_link_up() only check the link up bit (once, not a polling loop).

While commit 886bc5ceb5cc ("PCI: designware: Add generic dw_pcie_wait_for_link()"), replaced the loop in imx6_pcie_wait_for_link() with a call to a new dwc core function, which polled imx6_pcie_link_up(), which still checked both link up and not training in a loop.

When these two commits were merged, the version of imx6_pcie_wait_for_link() from 886bc5ceb5cc was kept, which eliminated the link training check placed there by 4d107d3b5a68. However, the version of imx6_pcie_link_up() from 4d107d3b5a68 was kept, which eliminated the link training check that had been there and was moved to imx6_pcie_wait_for_link().

The result was the link training check got lost for the imx6 driver.

Eliminate imx6_pcie_link_up() so that the default handler, dw_pcie_link_up(), is used instead. The default handler has the correct code, which checks for link up and also that it still is not training, fixing the regression.

Fixes: 562df5c8521e ("Merge branch 'pci/host-designware' into next") Signed-off-by: Trent Piepho tpiepho@impinj.com [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Lucas Stach l.stach@pengutronix.de Cc: Bjorn Helgaas bhelgaas@google.com Cc: Joao Pinto Joao.Pinto@synopsys.com Cc: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Cc: Richard Zhu hongxing.zhu@nxp.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/dwc/pci-imx6.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c index b73483534a5b..1f1069b70e45 100644 --- a/drivers/pci/dwc/pci-imx6.c +++ b/drivers/pci/dwc/pci-imx6.c @@ -83,8 +83,6 @@ struct imx6_pcie { #define PCIE_PL_PFLR_FORCE_LINK (1 << 15) #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28) #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c) -#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29) -#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP (1 << 4)

#define PCIE_PHY_CTRL (PL_OFFSET + 0x114) #define PCIE_PHY_CTRL_DATA_LOC 0 @@ -653,12 +651,6 @@ static int imx6_pcie_host_init(struct pcie_port *pp) return 0; }

-static int imx6_pcie_link_up(struct dw_pcie *pci) -{ - return dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1) & - PCIE_PHY_DEBUG_R1_XMLH_LINK_UP; -} - static const struct dw_pcie_host_ops imx6_pcie_host_ops = { .host_init = imx6_pcie_host_init, }; @@ -701,7 +693,7 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie, }

static const struct dw_pcie_ops dw_pcie_ops = { - .link_up = imx6_pcie_link_up, + /* No special ops needed, but pcie-designware still expects this struct */ };

static int imx6_pcie_probe(struct platform_device *pdev)

From: Artem Savkov asavkov@redhat.com

[ Upstream commit 22566c1603030f0a036ad564634b064ad1a55db2 ]

Because find_symbol_by_name() traverses the same lists as read_symbols(), changing sym->name in place without copying it affects the result of find_symbol_by_name(). In the case where a ".cold" function precedes its parent in sec->symbol_list, it can result in a function being considered a parent of itself. This leads to function length being set to 0 and other consequent side-effects including a segfault in add_switch_table(). The effects of this bug are only visible when building with -ffunction-sections in KCFLAGS.

Fix by copying the search string instead of modifying it in place.

Signed-off-by: Artem Savkov asavkov@redhat.com Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/objtool/elf.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index 3616d626991e..dd4ed7c3c062 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -31,6 +31,8 @@ #include "elf.h" #include "warn.h"

+#define MAX_NAME_LEN 128 + struct section *find_section_by_name(struct elf *elf, const char *name) { struct section *sec; @@ -298,6 +300,8 @@ static int read_symbols(struct elf *elf) /* Create parent/child links for any cold subfunctions */ list_for_each_entry(sec, &elf->sections, list) { list_for_each_entry(sym, &sec->symbol_list, list) { + char pname[MAX_NAME_LEN + 1]; + size_t pnamelen; if (sym->type != STT_FUNC) continue; sym->pfunc = sym->cfunc = sym; @@ -305,9 +309,16 @@ static int read_symbols(struct elf *elf) if (!coldstr) continue;

- coldstr[0] = '\0'; - pfunc = find_symbol_by_name(elf, sym->name); - coldstr[0] = '.'; + pnamelen = coldstr - sym->name; + if (pnamelen > MAX_NAME_LEN) { + WARN("%s(): parent function name exceeds maximum length of %d characters", + sym->name, MAX_NAME_LEN); + return -1; + } + + strncpy(pname, sym->name, pnamelen); + pname[pnamelen] = '\0'; + pfunc = find_symbol_by_name(elf, pname);

if (!pfunc) { WARN("%s(): can't find parent function",

From: Robbie Ko robbieko@synology.com

[ Upstream commit a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]

When doing an incremental send, due to the need of delaying directory move (rename) operations we can end up in infinite loop at apply_children_dir_moves().

An example scenario that triggers this problem is described below, where directory names correspond to the numbers of their respective inodes.

Parent snapshot:

. |--- 261/ |--- 271/ |--- 266/ |--- 259/ |--- 260/ | |--- 267 | |--- 264/ | |--- 258/ | |--- 257/ | |--- 265/ |--- 268/ |--- 269/ | |--- 262/ | |--- 270/ |--- 272/ | |--- 263/ | |--- 275/ | |--- 274/ |--- 273/

Send snapshot:

. |-- 275/ |-- 274/ |-- 273/ |-- 262/ |-- 269/ |-- 258/ |-- 271/ |-- 268/ |-- 267/ |-- 270/ |-- 259/ | |-- 265/ | |-- 272/ |-- 257/ |-- 260/ |-- 264/ |-- 263/ |-- 261/ |-- 266/

When processing inode 257 we delay its move (rename) operation because its new parent in the send snapshot, inode 272, was not yet processed. Then when processing inode 272, we delay the move operation for that inode because inode 274 is its ancestor in the send snapshot. Finally we delay the move operation for inode 274 when processing it because inode 275 is its new parent in the send snapshot and was not yet moved.

When finishing processing inode 275, we start to do the move operations that were previously delayed (at apply_children_dir_moves()), resulting in the following iterations:

1) We issue the move operation for inode 274;

2) Because inode 262 depended on the move operation of inode 274 (it was delayed because 274 is its ancestor in the send snapshot), we issue the move operation for inode 262;

3) We issue the move operation for inode 272, because it was delayed by inode 274 too (ancestor of 272 in the send snapshot);

4) We issue the move operation for inode 269 (it was delayed by 262);

5) We issue the move operation for inode 257 (it was delayed by 272);

6) We issue the move operation for inode 260 (it was delayed by 272);

7) We issue the move operation for inode 258 (it was delayed by 269);

8) We issue the move operation for inode 264 (it was delayed by 257);

9) We issue the move operation for inode 271 (it was delayed by 258);

10) We issue the move operation for inode 263 (it was delayed by 264);

11) We issue the move operation for inode 268 (it was delayed by 271);

12) We verify if we can issue the move operation for inode 270 (it was delayed by 271). We detect a path loop in the current state, because inode 267 needs to be moved first before we can issue the move operation for inode 270. So we delay again the move operation for inode 270, this time we will attempt to do it after inode 267 is moved;

13) We issue the move operation for inode 261 (it was delayed by 263);

14) We verify if we can issue the move operation for inode 266 (it was delayed by 263). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12);

15) We issue the move operation for inode 267 (it was delayed by 268);

16) We verify if we can issue the move operation for inode 266 (it was delayed by 270). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12). So here we added again the same delayed move operation that we added in step 14;

17) We attempt again to see if we can issue the move operation for inode 266, and as in step 16, we realize we can not due to a path loop in the current state due to a dependency on inode 270. Again we delay inode's 266 rename to happen after inode's 270 move operation, adding the same dependency to the empty stack that we did in steps 14 and 16. The next iteration will pick the same move dependency on the stack (the only entry) and realize again there is still a path loop and then again the same dependency to the stack, over and over, resulting in an infinite loop.

So fix this by preventing adding the same move dependency entries to the stack by removing each pending move record from the red black tree of pending moves. This way the next call to get_pending_dir_moves() will not return anything for the current parent inode.

A test case for fstests, with this reproducer, follows soon.

Signed-off-by: Robbie Ko robbieko@synology.com Reviewed-by: Filipe Manana fdmanana@suse.com [Wrote changelog with example and more clear explanation] Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/send.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index baf5a4cd7ffc..3f22af96d63b 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -3354,7 +3354,8 @@ static void free_pending_move(struct send_ctx *sctx, struct pending_dir_move *m) kfree(m); }

-static void tail_append_pending_moves(struct pending_dir_move *moves, +static void tail_append_pending_moves(struct send_ctx *sctx, + struct pending_dir_move *moves, struct list_head *stack) { if (list_empty(&moves->list)) { @@ -3365,6 +3366,10 @@ static void tail_append_pending_moves(struct pending_dir_move *moves, list_add_tail(&moves->list, stack); list_splice_tail(&list, stack); } + if (!RB_EMPTY_NODE(&moves->node)) { + rb_erase(&moves->node, &sctx->pending_dir_moves); + RB_CLEAR_NODE(&moves->node); + } }

static int apply_children_dir_moves(struct send_ctx *sctx) @@ -3379,7 +3384,7 @@ static int apply_children_dir_moves(struct send_ctx *sctx) return 0;

INIT_LIST_HEAD(&stack); - tail_append_pending_moves(pm, &stack); + tail_append_pending_moves(sctx, pm, &stack);

while (!list_empty(&stack)) { pm = list_first_entry(&stack, struct pending_dir_move, list); @@ -3390,7 +3395,7 @@ static int apply_children_dir_moves(struct send_ctx *sctx) goto out; pm = get_pending_dir_moves(sctx, parent_ino); if (pm) - tail_append_pending_moves(pm, &stack); + tail_append_pending_moves(sctx, pm, &stack); } return 0;

From: Kamal Heib kamalheib1@gmail.com

[ Upstream commit 4f32fb921b153ae9ea280e02a3e91509fffc03d3 ]

rdmavt uses a crazy system that looses the type checking when assinging functions to struct ib_device function pointers. Because of this the signature to this function was not changed when the below commit revised things.

Fix the signature so we are not calling a function pointer with a mismatched signature.

Fixes: 477864c8fcd9 ("IB/core: Let create_ah return extended response to user") Signed-off-by: Kamal Heib kamalheib1@gmail.com Reviewed-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/sw/rdmavt/ah.c | 4 +++- drivers/infiniband/sw/rdmavt/ah.h | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/sw/rdmavt/ah.c b/drivers/infiniband/sw/rdmavt/ah.c index ba3639a0d77c..48ea5b8207f0 100644 --- a/drivers/infiniband/sw/rdmavt/ah.c +++ b/drivers/infiniband/sw/rdmavt/ah.c @@ -91,13 +91,15 @@ EXPORT_SYMBOL(rvt_check_ah); * rvt_create_ah - create an address handle * @pd: the protection domain * @ah_attr: the attributes of the AH + * @udata: pointer to user's input output buffer information. * * This may be called from interrupt context. * * Return: newly allocated ah */ struct ib_ah *rvt_create_ah(struct ib_pd *pd, - struct rdma_ah_attr *ah_attr) + struct rdma_ah_attr *ah_attr, + struct ib_udata *udata) { struct rvt_ah *ah; struct rvt_dev_info *dev = ib_to_rvt(pd->device); diff --git a/drivers/infiniband/sw/rdmavt/ah.h b/drivers/infiniband/sw/rdmavt/ah.h index 16105af99189..25271b48a683 100644 --- a/drivers/infiniband/sw/rdmavt/ah.h +++ b/drivers/infiniband/sw/rdmavt/ah.h @@ -51,7 +51,8 @@ #include <rdma/rdma_vt.h>

struct ib_ah *rvt_create_ah(struct ib_pd *pd, - struct rdma_ah_attr *ah_attr); + struct rdma_ah_attr *ah_attr, + struct ib_udata *udata); int rvt_destroy_ah(struct ib_ah *ibah); int rvt_modify_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr); int rvt_query_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr);

From: Peter Ujfalusi peter.ujfalusi@ti.com

[ Upstream commit dd2f52d8991af9fe0928d59ec502ba52be7bc38d ]

The latency number is in usec for the pm_qos. Correct the calculation to give us the time in usec

Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Acked-by: Jarkko Nikula jarkko.nikula@bitmer.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/omap/omap-mcbsp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 6b40bdbef336..47c2ed5ca492 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -308,9 +308,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, pkt_size = channels; }

- latency = ((((buffer_size - pkt_size) / channels) * 1000) - / (params->rate_num / params->rate_den)); - + latency = (buffer_size - pkt_size) / channels; + latency = latency * USEC_PER_SEC / + (params->rate_num / params->rate_den); mcbsp->latency[substream->stream] = latency;

omap_mcbsp_set_threshold(substream, pkt_size);

From: Peter Ujfalusi peter.ujfalusi@ti.com

[ Upstream commit ffdcc3638c58d55a6fa68b6e5dfd4fb4109652eb ]

We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without overrun.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Acked-by: Jarkko Nikula jarkko.nikula@bitmer.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/omap/omap-dmic.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c index 09db2aec12a3..776e809a8aab 100644 --- a/sound/soc/omap/omap-dmic.c +++ b/sound/soc/omap/omap-dmic.c @@ -48,6 +48,8 @@ struct omap_dmic { struct device *dev; void __iomem *io_base; struct clk *fclk; + struct pm_qos_request pm_qos_req; + int latency; int fclk_freq; int out_freq; int clk_div; @@ -124,6 +126,8 @@ static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,

mutex_lock(&dmic->mutex);

+ pm_qos_remove_request(&dmic->pm_qos_req); + if (!dai->active) dmic->active = 0;

@@ -226,6 +230,8 @@ static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream, /* packet size is threshold * channels */ dma_data = snd_soc_dai_get_dma_data(dai, substream); dma_data->maxburst = dmic->threshold * channels; + dmic->latency = (OMAP_DMIC_THRES_MAX - dmic->threshold) * USEC_PER_SEC / + params_rate(params);

return 0; } @@ -236,6 +242,9 @@ static int omap_dmic_dai_prepare(struct snd_pcm_substream *substream, struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); u32 ctrl;

+ if (pm_qos_request_active(&dmic->pm_qos_req)) + pm_qos_update_request(&dmic->pm_qos_req, dmic->latency); + /* Configure uplink threshold */ omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL_REG, dmic->threshold);

From: Martynas Pumputis m@lambda.lt

[ Upstream commit 1efb6ee3edea57f57f9fb05dba8dcb3f7333f61f ]

A format string consisting of "%p" or "%s" followed by an invalid specifier (e.g. "%p%\n" or "%s%") could pass the check which would make format_decode (lib/vsprintf.c) to warn.

Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com Signed-off-by: Martynas Pumputis m@lambda.lt Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/bpf_trace.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index 6350f64d5aa4..f9dd8fd055a6 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -161,11 +161,13 @@ BPF_CALL_5(bpf_trace_printk, char *, fmt, u32, fmt_size, u64, arg1, i++; } else if (fmt[i] == 'p' || fmt[i] == 's') { mod[fmt_cnt]++; - i++; - if (!isspace(fmt[i]) && !ispunct(fmt[i]) && fmt[i] != 0) + /* disallow any further format extensions */ + if (fmt[i + 1] != 0 && + !isspace(fmt[i + 1]) && + !ispunct(fmt[i + 1])) return -EINVAL; fmt_cnt++; - if (fmt[i - 1] == 's') { + if (fmt[i] == 's') { if (str_seen) /* allow only one '%s' per fmt string */ return -EINVAL;

From: Aaro Koskinen aaro.koskinen@iki.fi

[ Upstream commit 286afdde1640d8ea8916a0f05e811441fbbf4b9d ]

The current code fails to release the third irq on the error path (observed by reading the code), and we get also multiple WARNs with failing gadget drivers due to duplicate IRQ releases. Fix by using devm_request_irq().

Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/omap_udc.c | 37 +++++++++---------------------- 1 file changed, 10 insertions(+), 27 deletions(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index f05ba6825bfe..e515c85ef0c5 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2886,8 +2886,8 @@ static int omap_udc_probe(struct platform_device *pdev) udc->clr_halt = UDC_RESET_EP;

/* USB general purpose IRQ: ep0, state changes, dma, etc */ - status = request_irq(pdev->resource[1].start, omap_udc_irq, - 0, driver_name, udc); + status = devm_request_irq(&pdev->dev, pdev->resource[1].start, + omap_udc_irq, 0, driver_name, udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[1].start, status); @@ -2895,20 +2895,20 @@ static int omap_udc_probe(struct platform_device *pdev) }

/* USB "non-iso" IRQ (PIO for all but ep0) */ - status = request_irq(pdev->resource[2].start, omap_udc_pio_irq, - 0, "omap_udc pio", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[2].start, + omap_udc_pio_irq, 0, "omap_udc pio", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[2].start, status); - goto cleanup2; + goto cleanup1; } #ifdef USE_ISO - status = request_irq(pdev->resource[3].start, omap_udc_iso_irq, - 0, "omap_udc iso", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[3].start, + omap_udc_iso_irq, 0, "omap_udc iso", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[3].start, status); - goto cleanup3; + goto cleanup1; } #endif if (cpu_is_omap16xx() || cpu_is_omap7xx()) { @@ -2921,22 +2921,11 @@ static int omap_udc_probe(struct platform_device *pdev) create_proc_file(); status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, omap_udc_release); - if (status) - goto cleanup4; - - return 0; + if (!status) + return 0;

-cleanup4: remove_proc_file();

-#ifdef USE_ISO -cleanup3: - free_irq(pdev->resource[2].start, udc); -#endif - -cleanup2: - free_irq(pdev->resource[1].start, udc); - cleanup1: kfree(udc); udc = NULL; @@ -2980,12 +2969,6 @@ static int omap_udc_remove(struct platform_device *pdev)

remove_proc_file();

-#ifdef USE_ISO - free_irq(pdev->resource[3].start, udc); -#endif - free_irq(pdev->resource[2].start, udc); - free_irq(pdev->resource[1].start, udc); - if (udc->dc_clk) { if (udc->clk_requested) omap_udc_enable_clock(0);

From: Aaro Koskinen aaro.koskinen@iki.fi

[ Upstream commit 6ca6695f576b8453fe68865e84d25946d63b10ad ]

On OMAP 15xx machines there are no transceivers, and omap_udc_start() always fails as it forgot to adjust the default return value.

Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/omap_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index d45dc14ef0a2..9060b3af27ff 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2045,7 +2045,7 @@ static inline int machine_without_vbus_sense(void) static int omap_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver) { - int status = -ENODEV; + int status; struct omap_ep *ep; unsigned long flags;

@@ -2083,6 +2083,7 @@ static int omap_udc_start(struct usb_gadget *g, goto done; } } else { + status = 0; if (can_pullup(udc)) pullup_enable(udc); else

From: Aaro Koskinen aaro.koskinen@iki.fi

[ Upstream commit 069caf5950dfa75d0526cd89c439ff9d9d3136d8 ]

Commit 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size") started aligning transfer size only if requested, breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore the old behaviour.

Fixes: 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size") Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/omap_udc.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index c8facc8aa87e..ee0b87a0773c 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2661,6 +2661,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) udc->gadget.speed = USB_SPEED_UNKNOWN; udc->gadget.max_speed = USB_SPEED_FULL; udc->gadget.name = driver_name; + udc->gadget.quirk_ep_out_aligned_size = 1; udc->transceiver = xceiv;

/* ep0 is special; put it right after the SETUP buffer */

From: Alin Nastac alin.nastac@gmail.com

[ Upstream commit 508b09046c0f21678652fb66fd1e9959d55591d2 ]

When ip6_route_me_harder is invoked, it resets outgoing interface of: - link-local scoped packets sent by neighbor discovery - multicast packets sent by MLD host - multicast packets send by MLD proxy daemon that sets outgoing interface through IPV6_PKTINFO ipi6_ifindex

Link-local and multicast packets must keep their original oif after ip6_route_me_harder is called.

Signed-off-by: Alin Nastac alin.nastac@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/netfilter.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c index 9bf260459f83..1f8b1a433b5d 100644 --- a/net/ipv6/netfilter.c +++ b/net/ipv6/netfilter.c @@ -25,7 +25,8 @@ int ip6_route_me_harder(struct net *net, struct sk_buff *skb) unsigned int hh_len; struct dst_entry *dst; struct flowi6 fl6 = { - .flowi6_oif = sk ? sk->sk_bound_dev_if : 0, + .flowi6_oif = sk && sk->sk_bound_dev_if ? sk->sk_bound_dev_if : + rt6_need_strict(&iph->daddr) ? skb_dst(skb)->dev->ifindex : 0, .flowi6_mark = skb->mark, .flowi6_uid = sock_net_uid(net, sk), .daddr = iph->daddr,

From: Yi Wang wang.yi59@zte.com.cn

[ Upstream commit 354cb410d87314e2eda344feea84809e4261570a ]

We get the following warnings about empty statements when building with 'W=1':

arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Rework the debug helper macro to get rid of these warnings.

Signed-off-by: Yi Wang wang.yi59@zte.com.cn Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/lapic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 13dfb55b84db..f7c34184342a 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -55,7 +55,7 @@ #define PRIo64 "o"

/* #define apic_debug(fmt,arg...) printk(KERN_WARNING fmt,##arg) */ -#define apic_debug(fmt, arg...) +#define apic_debug(fmt, arg...) do {} while (0)

/* 14 is the version for Xeon and Pentium 8.4.8*/ #define APIC_VERSION (0x14UL | ((KVM_APIC_LVT_NUM - 1) << 16))

From: Lorenzo Bianconi lorenzo.bianconi@redhat.com

[ Upstream commit 24a6d2dd263bc910de018c78d1148b3e33b94512 ]

Fix a possible NULL pointer dereference in nic_remove routine removing the nicpf module if nic_probe fails. The issue can be triggered with the following reproducer:

$rmmod nicvf $rmmod nicpf

[ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014 [ 521.422777] Mem abort info: [ 521.425561] ESR = 0x96000004 [ 521.428624] Exception class = DABT (current EL), IL = 32 bits [ 521.434535] SET = 0, FnV = 0 [ 521.437579] EA = 0, S1PTW = 0 [ 521.440730] Data abort info: [ 521.443603] ISV = 0, ISS = 0x00000004 [ 521.447431] CM = 0, WnR = 0 [ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42 [ 521.457022] [0000000000000014] pgd=0000000000000000 [ 521.461916] Internal error: Oops: 96000004 [#1] SMP [ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 521.523451] pc : nic_remove+0x24/0x88 [nicpf] [ 521.527808] lr : pci_device_remove+0x48/0xd8 [ 521.532066] sp : ffff000013433cc0 [ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000 [ 521.540672] x27: 0000000000000000 x26: 0000000000000000 [ 521.545974] x25: 0000000056000000 x24: 0000000000000015 [ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070 [ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000 [ 521.561877] x19: 0000000000000000 x18: 0000000000000025 [ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000 [ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001 [ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003 [ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184 [ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0 [ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3) [ 521.621490] Call trace: [ 521.623928] nic_remove+0x24/0x88 [nicpf] [ 521.627927] pci_device_remove+0x48/0xd8 [ 521.631847] device_release_driver_internal+0x1b0/0x248 [ 521.637062] driver_detach+0x50/0xc0 [ 521.640628] bus_remove_driver+0x60/0x100 [ 521.644627] driver_unregister+0x34/0x60 [ 521.648538] pci_unregister_driver+0x24/0xd8 [ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf] [ 521.657672] __arm64_sys_delete_module+0x150/0x218 [ 521.662460] el0_svc_handler+0x94/0x110 [ 521.666287] el0_svc+0x8/0xc [ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660)

Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi lorenzo.bianconi@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cavium/thunder/nic_main.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index fb770b0182d3..d89ec4724efd 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -1376,6 +1376,9 @@ static void nic_remove(struct pci_dev *pdev) { struct nicpf *nic = pci_get_drvdata(pdev);

+ if (!nic) + return; + if (nic->flags & NIC_SRIOV_ENABLED) pci_disable_sriov(pdev);

From: Taehee Yoo ap420073@gmail.com

[ Upstream commit ca08987885a147643817d02bf260bc4756ce8cd4 ]

There is no expression deactivation call from the rule replacement path, hence, chain counter is not decremented. A few steps to reproduce the problem:

%nft add table ip filter %nft add chain ip filter c1 %nft add chain ip filter c1 %nft add rule ip filter c1 jump c2 %nft replace rule ip filter c1 handle 3 accept %nft flush ruleset

<jump c2> expression means immediate NFT_JUMP to chain c2. Reference count of chain c2 is increased when the rule is added.

When rule is deleted or replaced, the reference counter of c2 should be decreased via nft_rule_expr_deactivate() which calls nft_immediate_deactivate().

Splat looks like: [ 214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables] [ 214.398983] Modules linked in: nf_tables nfnetlink [ 214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44 [ 214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables] [ 214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8 [ 214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202 [ 214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0 [ 214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78 [ 214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000 [ 214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba [ 214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6 [ 214.398983] FS: 0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000 [ 214.398983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0 [ 214.398983] Call Trace: [ 214.398983] ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables] [ 214.398983] ? __kasan_slab_free+0x145/0x180 [ 214.398983] ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables] [ 214.398983] ? kfree+0xdb/0x280 [ 214.398983] nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables] [ ... ]

Fixes: bb7b40aecbf7 ("netfilter: nf_tables: bogus EBUSY in chain deletions") Reported by: Christoph Anton Mitterer calestyo@scientia.net Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505 Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791 Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index ea1e57daf50e..623ec29ade26 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2400,21 +2400,14 @@ static int nf_tables_newrule(struct net *net, struct sock *nlsk, }

if (nlh->nlmsg_flags & NLM_F_REPLACE) { - if (!nft_is_active_next(net, old_rule)) { - err = -ENOENT; - goto err2; - } - trans = nft_trans_rule_add(&ctx, NFT_MSG_DELRULE, - old_rule); + trans = nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule); if (trans == NULL) { err = -ENOMEM; goto err2; } - nft_deactivate_next(net, old_rule); - chain->use--; - - if (nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule) == NULL) { - err = -ENOMEM; + err = nft_delrule(&ctx, old_rule); + if (err < 0) { + nft_trans_destroy(trans); goto err2; }

From: Yunjian Wang wangyunjian@huawei.com

[ Upstream commit e4c39f7926b4de355f7df75651d75003806aae09 ]

This patch fixes the variable 'phy_word' may be used uninitialized.

Signed-off-by: Yunjian Wang wangyunjian@huawei.com Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/igb/e1000_i210.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index 07d48f2e3369..6766081f5ab9 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -862,6 +862,7 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw) nvm_word = E1000_INVM_DEFAULT_AL; tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL; igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, E1000_PHY_PLL_FREQ_PAGE); + phy_word = E1000_PHY_PLL_UNCONF; for (i = 0; i < E1000_MAX_PLL_TRIES; i++) { /* check current state directly from internal PHY */ igb_read_phy_reg_82580(hw, E1000_PHY_PLL_FREQ_REG, &phy_word);

From: Pan Bian bianpan2016@163.com

[ Upstream commit cfc435198f53a6fa1f656d98466b24967ff457d0 ]

skb is freed via dev_kfree_skb_any, however, skb->len is read then. This may result in a use-after-free bug.

Fixes: e6161d64263 ("rapidio/rionet: rework driver initialization and removal") Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/rionet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index e9f101c9bae2..bfbb39f93554 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -216,9 +216,9 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev) * it just report sending a packet to the target * (without actual packet transfer). */ - dev_kfree_skb_any(skb); ndev->stats.tx_packets++; ndev->stats.tx_bytes += skb->len; + dev_kfree_skb_any(skb); } }

From: Julian Wiedmann jwi@linux.ibm.com

[ Upstream commit 9a764c1e59684c0358e16ccaafd870629f2cfe67 ]

The response for a SNMP request can consist of multiple parts, which the cmd callback stages into a kernel buffer until all parts have been received. If the callback detects that the staging buffer provides insufficient space, it bails out with error. This processing is buggy for the first part of the response - while it initially checks for a length of 'data_len', it later copies an additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.

Fix the calculation of 'data_len' for the first part of the response. This also nicely cleans up the memcpy code.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Julian Wiedmann jwi@linux.ibm.com Reviewed-by: Ursula Braun ubraun@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/net/qeth_core_main.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 169dd7127f9e..69ef5f4060ed 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4545,8 +4545,8 @@ static int qeth_snmp_command_cb(struct qeth_card *card, { struct qeth_ipa_cmd *cmd; struct qeth_arp_query_info *qinfo; - struct qeth_snmp_cmd *snmp; unsigned char *data; + void *snmp_data; __u16 data_len;

QETH_CARD_TEXT(card, 3, "snpcmdcb"); @@ -4554,7 +4554,6 @@ static int qeth_snmp_command_cb(struct qeth_card *card, cmd = (struct qeth_ipa_cmd *) sdata; data = (unsigned char *)((char *)cmd - reply->offset); qinfo = (struct qeth_arp_query_info *) reply->param; - snmp = &cmd->data.setadapterparms.data.snmp;

if (cmd->hdr.return_code) { QETH_CARD_TEXT_(card, 4, "scer1%x", cmd->hdr.return_code); @@ -4567,10 +4566,15 @@ static int qeth_snmp_command_cb(struct qeth_card *card, return 0; } data_len = *((__u16 *)QETH_IPA_PDU_LEN_PDU1(data)); - if (cmd->data.setadapterparms.hdr.seq_no == 1) - data_len -= (__u16)((char *)&snmp->data - (char *)cmd); - else - data_len -= (__u16)((char *)&snmp->request - (char *)cmd); + if (cmd->data.setadapterparms.hdr.seq_no == 1) { + snmp_data = &cmd->data.setadapterparms.data.snmp; + data_len -= offsetof(struct qeth_ipa_cmd, + data.setadapterparms.data.snmp); + } else { + snmp_data = &cmd->data.setadapterparms.data.snmp.request; + data_len -= offsetof(struct qeth_ipa_cmd, + data.setadapterparms.data.snmp.request); + }

/* check if there is enough room in userspace */ if ((qinfo->udata_len - qinfo->udata_offset) < data_len) { @@ -4583,16 +4587,9 @@ static int qeth_snmp_command_cb(struct qeth_card *card, QETH_CARD_TEXT_(card, 4, "sseqn%i", cmd->data.setadapterparms.hdr.seq_no); /*copy entries to user buffer*/ - if (cmd->data.setadapterparms.hdr.seq_no == 1) { - memcpy(qinfo->udata + qinfo->udata_offset, - (char *)snmp, - data_len + offsetof(struct qeth_snmp_cmd, data)); - qinfo->udata_offset += offsetof(struct qeth_snmp_cmd, data); - } else { - memcpy(qinfo->udata + qinfo->udata_offset, - (char *)&snmp->request, data_len); - } + memcpy(qinfo->udata + qinfo->udata_offset, snmp_data, data_len); qinfo->udata_offset += data_len; + /* check if all replies received ... */ QETH_CARD_TEXT_(card, 4, "srtot%i", cmd->data.setadapterparms.hdr.used_total);

From: "Y.C. Chen" yc_chen@aspeedtech.com

[ Upstream commit 300625620314194d9e6d4f6dda71f2dc9cf62d9f ]

v1: over-sample data to increase the stability with some specific monitors v2: refine to avoid infinite loop v3: remove un-necessary "volatile" declaration

[airlied: fix two checkpatch warnings]

Signed-off-by: Y.C. Chen yc_chen@aspeedtech.com Signed-off-by: Dave Airlie airlied@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-ema... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/ast/ast_mode.c | 36 ++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index fae1176b2472..343867b182dd 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -973,9 +973,21 @@ static int get_clock(void *i2c_priv) { struct ast_i2c_chan *i2c = i2c_priv; struct ast_private *ast = i2c->dev->dev_private; - uint32_t val; + uint32_t val, val2, count, pass; + + count = 0; + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01; + do { + val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01; + if (val == val2) { + pass++; + } else { + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01; + } + } while ((pass < 5) && (count++ < 0x10000));

- val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4; return val & 1 ? 1 : 0; }

@@ -983,9 +995,21 @@ static int get_data(void *i2c_priv) { struct ast_i2c_chan *i2c = i2c_priv; struct ast_private *ast = i2c->dev->dev_private; - uint32_t val; + uint32_t val, val2, count, pass; + + count = 0; + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01; + do { + val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01; + if (val == val2) { + pass++; + } else { + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01; + } + } while ((pass < 5) && (count++ < 0x10000));

- val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5; return val & 1 ? 1 : 0; }

@@ -998,7 +1022,7 @@ static void set_clock(void *i2c_priv, int clock)

for (i = 0; i < 0x10000; i++) { ujcrb7 = ((clock & 0x01) ? 0 : 1); - ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfe, ujcrb7); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf4, ujcrb7); jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x01); if (ujcrb7 == jtemp) break; @@ -1014,7 +1038,7 @@ static void set_data(void *i2c_priv, int data)

for (i = 0; i < 0x10000; i++) { ujcrb7 = ((data & 0x01) ? 0 : 1) << 2; - ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfb, ujcrb7); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf1, ujcrb7); jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x04); if (ujcrb7 == jtemp) break;

From: Igor Druzhinin igor.druzhinin@citrix.com

[ Upstream commit 123664101aa2156d05251704fc63f9bcbf77741a ]

This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f.

That commit unintentionally broke Xen balloon memory hotplug with "hotplug_unpopulated" set to 1. As long as "System RAM" resource got assigned under a new "Unusable memory" resource in IO/Mem tree any attempt to online this memory would fail due to general kernel restrictions on having "System RAM" resources as 1st level only.

The original issue that commit has tried to workaround fa564ad96366 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move and shrink AMD 64-bit window to avoid conflict") which made the original fix to Xen ballooning unnecessary.

Signed-off-by: Igor Druzhinin igor.druzhinin@citrix.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/xen/enlighten.c | 78 ---------------------------------------- arch/x86/xen/setup.c | 6 ++-- drivers/xen/balloon.c | 65 +++++---------------------------- include/xen/balloon.h | 5 --- 4 files changed, 13 insertions(+), 141 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index df208af3cd74..515d5e4414c2 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -7,7 +7,6 @@

#include <xen/features.h> #include <xen/page.h> -#include <xen/interface/memory.h>

#include <asm/xen/hypercall.h> #include <asm/xen/hypervisor.h> @@ -336,80 +335,3 @@ void xen_arch_unregister_cpu(int num) } EXPORT_SYMBOL(xen_arch_unregister_cpu); #endif - -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG -void __init arch_xen_balloon_init(struct resource *hostmem_resource) -{ - struct xen_memory_map memmap; - int rc; - unsigned int i, last_guest_ram; - phys_addr_t max_addr = PFN_PHYS(max_pfn); - struct e820_table *xen_e820_table; - const struct e820_entry *entry; - struct resource *res; - - if (!xen_initial_domain()) - return; - - xen_e820_table = kmalloc(sizeof(*xen_e820_table), GFP_KERNEL); - if (!xen_e820_table) - return; - - memmap.nr_entries = ARRAY_SIZE(xen_e820_table->entries); - set_xen_guest_handle(memmap.buffer, xen_e820_table->entries); - rc = HYPERVISOR_memory_op(XENMEM_machine_memory_map, &memmap); - if (rc) { - pr_warn("%s: Can't read host e820 (%d)\n", __func__, rc); - goto out; - } - - last_guest_ram = 0; - for (i = 0; i < memmap.nr_entries; i++) { - if (xen_e820_table->entries[i].addr >= max_addr) - break; - if (xen_e820_table->entries[i].type == E820_TYPE_RAM) - last_guest_ram = i; - } - - entry = &xen_e820_table->entries[last_guest_ram]; - if (max_addr >= entry->addr + entry->size) - goto out; /* No unallocated host RAM. */ - - hostmem_resource->start = max_addr; - hostmem_resource->end = entry->addr + entry->size; - - /* - * Mark non-RAM regions between the end of dom0 RAM and end of host RAM - * as unavailable. The rest of that region can be used for hotplug-based - * ballooning. - */ - for (; i < memmap.nr_entries; i++) { - entry = &xen_e820_table->entries[i]; - - if (entry->type == E820_TYPE_RAM) - continue; - - if (entry->addr >= hostmem_resource->end) - break; - - res = kzalloc(sizeof(*res), GFP_KERNEL); - if (!res) - goto out; - - res->name = "Unavailable host RAM"; - res->start = entry->addr; - res->end = (entry->addr + entry->size < hostmem_resource->end) ? - entry->addr + entry->size : hostmem_resource->end; - rc = insert_resource(hostmem_resource, res); - if (rc) { - pr_warn("%s: Can't insert [%llx - %llx) (%d)\n", - __func__, res->start, res->end, rc); - kfree(res); - goto out; - } - } - - out: - kfree(xen_e820_table); -} -#endif /* CONFIG_XEN_BALLOON_MEMORY_HOTPLUG */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 6e0d2086eacb..c114ca767b3b 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -808,6 +808,7 @@ char * __init xen_memory_setup(void) addr = xen_e820_table.entries[0].addr; size = xen_e820_table.entries[0].size; while (i < xen_e820_table.nr_entries) { + bool discard = false;

chunk_size = size; type = xen_e820_table.entries[i].type; @@ -823,10 +824,11 @@ char * __init xen_memory_setup(void) xen_add_extra_mem(pfn_s, n_pfns); xen_max_p2m_pfn = pfn_s + n_pfns; } else - type = E820_TYPE_UNUSABLE; + discard = true; }

- xen_align_and_add_e820_region(addr, chunk_size, type); + if (!discard) + xen_align_and_add_e820_region(addr, chunk_size, type);

addr += chunk_size; size -= chunk_size; diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 065f0b607373..f77e499afddd 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -257,25 +257,10 @@ static void release_memory_resource(struct resource *resource) kfree(resource); }

-/* - * Host memory not allocated to dom0. We can use this range for hotplug-based - * ballooning. - * - * It's a type-less resource. Setting IORESOURCE_MEM will make resource - * management algorithms (arch_remove_reservations()) look into guest e820, - * which we don't want. - */ -static struct resource hostmem_resource = { - .name = "Host RAM", -}; - -void __attribute__((weak)) __init arch_xen_balloon_init(struct resource *res) -{} - static struct resource *additional_memory_resource(phys_addr_t size) { - struct resource *res, *res_hostmem; - int ret = -ENOMEM; + struct resource *res; + int ret;

res = kzalloc(sizeof(*res), GFP_KERNEL); if (!res) @@ -284,42 +269,13 @@ static struct resource *additional_memory_resource(phys_addr_t size) res->name = "System RAM"; res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;

- res_hostmem = kzalloc(sizeof(*res), GFP_KERNEL); - if (res_hostmem) { - /* Try to grab a range from hostmem */ - res_hostmem->name = "Host memory"; - ret = allocate_resource(&hostmem_resource, res_hostmem, - size, 0, -1, - PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); - } - - if (!ret) { - /* - * Insert this resource into iomem. Because hostmem_resource - * tracks portion of guest e820 marked as UNUSABLE noone else - * should try to use it. - */ - res->start = res_hostmem->start; - res->end = res_hostmem->end; - ret = insert_resource(&iomem_resource, res); - if (ret < 0) { - pr_err("Can't insert iomem_resource [%llx - %llx]\n", - res->start, res->end); - release_memory_resource(res_hostmem); - res_hostmem = NULL; - res->start = res->end = 0; - } - } - - if (ret) { - ret = allocate_resource(&iomem_resource, res, - size, 0, -1, - PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); - if (ret < 0) { - pr_err("Cannot allocate new System RAM resource\n"); - kfree(res); - return NULL; - } + ret = allocate_resource(&iomem_resource, res, + size, 0, -1, + PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); + if (ret < 0) { + pr_err("Cannot allocate new System RAM resource\n"); + kfree(res); + return NULL; }

#ifdef CONFIG_SPARSEMEM @@ -331,7 +287,6 @@ static struct resource *additional_memory_resource(phys_addr_t size) pr_err("New System RAM resource outside addressable RAM (%lu > %lu)\n", pfn, limit); release_memory_resource(res); - release_memory_resource(res_hostmem); return NULL; } } @@ -810,8 +765,6 @@ static int __init balloon_init(void) set_online_page_callback(&xen_online_page); register_memory_notifier(&xen_memory_nb); register_sysctl_table(xen_root); - - arch_xen_balloon_init(&hostmem_resource); #endif

#ifdef CONFIG_XEN_PV diff --git a/include/xen/balloon.h b/include/xen/balloon.h index 61f410fd74e4..4914b93a23f2 100644 --- a/include/xen/balloon.h +++ b/include/xen/balloon.h @@ -44,8 +44,3 @@ static inline void xen_balloon_init(void) { } #endif - -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG -struct resource; -void arch_xen_balloon_init(struct resource *hostmem_resource); -#endif

From: NeilBrown neilb@suse.com

[ Upstream commit c5a94f434c82529afda290df3235e4d85873c5b4 ]

It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup().

At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered.

When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared

There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting.

Customer which reported the hang, also report that the hang cannot be reproduced with this fix.

The backtrace for the blocked process looked like:

PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] #10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 #11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa #12 [ffff881ff43eff18] sys_read at ffffffff811fda62 #13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e

Signed-off-by: NeilBrown neilb@suse.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fscache/object.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 7a182c87f378..ab1d7f35f6c2 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -715,6 +715,9 @@ static const struct fscache_state *fscache_drop_object(struct fscache_object *ob

if (awaken) wake_up_bit(&cookie->flags, FSCACHE_COOKIE_INVALIDATING); + if (test_and_clear_bit(FSCACHE_COOKIE_LOOKING_UP, &cookie->flags)) + wake_up_bit(&cookie->flags, FSCACHE_COOKIE_LOOKING_UP); +

/* Prevent a race with our last child, which has to signal EV_CLEARED * before dropping our spinlock.

From: Sagi Grimberg sagi@grimberg.me

[ Upstream commit f6c8e432cb0479255322c5d0335b9f1699a0270c ]

nvme_stop_ctrl can be called also for reset flow and there is no need to flush the scan_work as namespaces are not being removed. This can cause deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers before controller teardown (and specifically I/O cancellation of the scan_work itself) takes place, but the scan_work will be blocked anyways so there is no need to flush it.

Instead, move scan_work flush to nvme_remove_namespaces() where it really needs to flush.

Reported-by: Ming Lei ming.lei@redhat.com Signed-off-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Keith Busch keith.busch@intel.com Reviewed by: James Smart jsmart2021@gmail.com Tested-by: Ewan D. Milne emilne@redhat.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 3a63d58d2ca9..65f3f1a34b6b 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2572,6 +2572,9 @@ void nvme_remove_namespaces(struct nvme_ctrl *ctrl) { struct nvme_ns *ns, *next;

+ /* prevent racing with ns scanning */ + flush_work(&ctrl->scan_work); + /* * The dead states indicates the controller was not gracefully * disconnected. In that case, we won't be able to flush any data while @@ -2743,7 +2746,6 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl) { nvme_stop_keep_alive(ctrl); flush_work(&ctrl->async_event_work); - flush_work(&ctrl->scan_work); cancel_work_sync(&ctrl->fw_act_work); } EXPORT_SYMBOL_GPL(nvme_stop_ctrl);

From: Linus Torvalds torvalds@linux-foundation.org

[ Upstream commit b1286ed7158e9b62787508066283ab0b8850b518 ]

New versions of gcc reasonably warn about the odd pattern of

strncpy(p, q, strlen(q));

which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case.

Apparently there was a patch for this floating around earlier, but it got lost.

Acked-again-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/test_hexdump.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/test_hexdump.c b/lib/test_hexdump.c index 3f415d8101f3..1c3c513add77 100644 --- a/lib/test_hexdump.c +++ b/lib/test_hexdump.c @@ -81,7 +81,7 @@ static void __init test_hexdump_prepare_test(size_t len, int rowsize, const char *q = *result++; size_t amount = strlen(q);

- strncpy(p, q, amount); + memcpy(p, q, amount); p += amount;

*p++ = ' ';

From: Larry Chen lchen@suse.com

[ Upstream commit e21e57445a64598b29a6f629688f9b9a39e7242a ]

ocfs2_defrag_extent may fall into deadlock.

ocfs2_ioctl_move_extents ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent ocfs2_lock_allocators_move_extents

ocfs2_reserve_clusters inode_lock GLOBAL_BITMAP_SYSTEM_INODE

__ocfs2_flush_truncate_log inode_lock GLOBAL_BITMAP_SYSTEM_INODE

As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock against the global bitmap if local allocator has not sufficient cluters. Once global bitmap could meet the demand, ocfs2_reserve_cluster will return success with global bitmap locked.

After ocfs2_reserve_cluster(), if truncate log is full, __ocfs2_flush_truncate_log() will definitely fall into deadlock because it needs to inode_lock global bitmap, which has already been locked.

To fix this bug, we could remove from ocfs2_lock_allocators_move_extents() the code which intends to lock global allocator, and put the removed code after __ocfs2_flush_truncate_log().

ocfs2_lock_allocators_move_extents() is referred by 2 places, one is here, the other does not need the data allocator context, which means this patch does not affect the caller so far.

Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com Signed-off-by: Larry Chen lchen@suse.com Reviewed-by: Changwei Ge ge.changwei@h3c.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Joseph Qi jiangqi903@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ocfs2/move_extents.c | 47 +++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 21 deletions(-)

diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c index 7eb3b0a6347e..f55f82ca3425 100644 --- a/fs/ocfs2/move_extents.c +++ b/fs/ocfs2/move_extents.c @@ -156,18 +156,14 @@ static int __ocfs2_move_extent(handle_t *handle, }

/* - * lock allocators, and reserving appropriate number of bits for - * meta blocks and data clusters. - * - * in some cases, we don't need to reserve clusters, just let data_ac - * be NULL. + * lock allocator, and reserve appropriate number of bits for + * meta blocks. */ -static int ocfs2_lock_allocators_move_extents(struct inode *inode, +static int ocfs2_lock_meta_allocator_move_extents(struct inode *inode, struct ocfs2_extent_tree *et, u32 clusters_to_move, u32 extents_to_split, struct ocfs2_alloc_context **meta_ac, - struct ocfs2_alloc_context **data_ac, int extra_blocks, int *credits) { @@ -192,13 +188,6 @@ static int ocfs2_lock_allocators_move_extents(struct inode *inode, goto out; }

- if (data_ac) { - ret = ocfs2_reserve_clusters(osb, clusters_to_move, data_ac); - if (ret) { - mlog_errno(ret); - goto out; - } - }

*credits += ocfs2_calc_extend_credits(osb->sb, et->et_root_el);

@@ -257,10 +246,10 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context, } }

- ret = ocfs2_lock_allocators_move_extents(inode, &context->et, *len, 1, - &context->meta_ac, - &context->data_ac, - extra_blocks, &credits); + ret = ocfs2_lock_meta_allocator_move_extents(inode, &context->et, + *len, 1, + &context->meta_ac, + extra_blocks, &credits); if (ret) { mlog_errno(ret); goto out; @@ -283,6 +272,21 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context, } }

+ /* + * Make sure ocfs2_reserve_cluster is called after + * __ocfs2_flush_truncate_log, otherwise, dead lock may happen. + * + * If ocfs2_reserve_cluster is called + * before __ocfs2_flush_truncate_log, dead lock on global bitmap + * may happen. + * + */ + ret = ocfs2_reserve_clusters(osb, *len, &context->data_ac); + if (ret) { + mlog_errno(ret); + goto out_unlock_mutex; + } + handle = ocfs2_start_trans(osb, credits); if (IS_ERR(handle)) { ret = PTR_ERR(handle); @@ -600,9 +604,10 @@ static int ocfs2_move_extent(struct ocfs2_move_extents_context *context, } }

- ret = ocfs2_lock_allocators_move_extents(inode, &context->et, len, 1, - &context->meta_ac, - NULL, extra_blocks, &credits); + ret = ocfs2_lock_meta_allocator_move_extents(inode, &context->et, + len, 1, + &context->meta_ac, + extra_blocks, &credits); if (ret) { mlog_errno(ret); goto out;

From: Pan Bian bianpan2016@163.com

[ Upstream commit ce96a407adef126870b3f4a1b73529dd8aa80f49 ]

hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees the node only when it is never again used.

Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.... Fixes: a1185ffa2fc ("HFS rewrite") Signed-off-by: Pan Bian bianpan2016@163.com Reviewed-by: Andrew Morton akpm@linux-foundation.org Cc: Joe Perches joe@perches.com Cc: Ernesto A. Fernandez ernesto.mnd.fernandez@gmail.com Cc: Viacheslav Dubeyko slava@dubeyko.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/hfs/btree.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c index 374b5688e29e..9bdff5e40626 100644 --- a/fs/hfs/btree.c +++ b/fs/hfs/btree.c @@ -329,13 +329,14 @@ void hfs_bmap_free(struct hfs_bnode *node)

nidx -= len * 8; i = node->next; - hfs_bnode_put(node); if (!i) { /* panic */; pr_crit("unable to free bnode %u. bmap not found!\n", node->this); + hfs_bnode_put(node); return; } + hfs_bnode_put(node); node = hfs_bnode_find(tree, i); if (IS_ERR(node)) return;

From: Qian Cai cai@gmx.us

[ Upstream commit 8de456cf87ba863e028c4dd01bae44255ce3d835 ]

CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to recursive calls.

fill_pool kmemleak_ignore make_black_object put_object __call_rcu (kernel/rcu/tree.c) debug_rcu_head_queue debug_object_activate debug_object_init fill_pool kmemleak_ignore make_black_object ...

So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly allocated debug objects at all.

Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us Signed-off-by: Qian Cai cai@gmx.us Suggested-by: Catalin Marinas catalin.marinas@arm.com Acked-by: Waiman Long longman@redhat.com Acked-by: Catalin Marinas catalin.marinas@arm.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Yang Shi yang.shi@linux.alibaba.com Cc: Arnd Bergmann arnd@arndb.de Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/debugobjects.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/lib/debugobjects.c b/lib/debugobjects.c index 99308479b1c8..bacb00a9cd9f 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -111,7 +111,6 @@ static void fill_pool(void) if (!new) return;

- kmemleak_ignore(new); raw_spin_lock_irqsave(&pool_lock, flags); hlist_add_head(&new->node, &obj_pool); debug_objects_allocated++; @@ -1085,7 +1084,6 @@ static int __init debug_objects_replace_static_objects(void) obj = kmem_cache_zalloc(obj_cache, GFP_KERNEL); if (!obj) goto free; - kmemleak_ignore(obj); hlist_add_head(&obj->node, &objects); }

@@ -1141,7 +1139,8 @@ void __init debug_objects_mem_init(void)

obj_cache = kmem_cache_create("debug_objects_cache", sizeof (struct debug_obj), 0, - SLAB_DEBUG_OBJECTS, NULL); + SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE, + NULL);

if (!obj_cache || debug_objects_replace_static_objects()) { debug_objects_enabled = 0;