From: Geoffrey D. Bennett g@b4.vu

commit 764fa6e686e0107c0357a988d193de04cf047583 upstream.

Use usb_rcvctrlpipe() not usb_sndctrlpipe() for USB control input in the Scarlett Gen 2 mixer driver. This fixes the device hang during initialisation when used with the ehci-pci host driver.

Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Signed-off-by: Geoffrey D. Bennett g@b4.vu Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/66a3d05dac325d5b53e4930578e143cef1f50dbe.162158456... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/mixer_scarlett_gen2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -635,7 +635,7 @@ static int scarlett2_usb( /* send a second message to get the response */

err = snd_usb_ctl_msg(mixer->chip->dev, - usb_sndctrlpipe(mixer->chip->dev, 0), + usb_rcvctrlpipe(mixer->chip->dev, 0), SCARLETT2_USB_VENDOR_SPECIFIC_CMD_RESP, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, 0,

From: Aurelien Aptel aaptel@suse.com

commit 6d2fcfe6b517fe7cbf2687adfb0a16cdcd5d9243 upstream.

SMB3.0 doesn't have encryption negotiate context but simply uses the SMB2_GLOBAL_CAP_ENCRYPTION flag.

When that flag is present in the neg response cifs.ko uses AES-128-CCM which is the only cipher available in this context.

cipher_type was set to the server cipher only when parsing encryption negotiate context (SMB3.1.1).

For SMB3.0 it was set to 0. This means cipher_type value can be 0 or 1 for AES-128-CCM.

Fix this by checking for SMB3.0 and encryption capability and setting cipher_type appropriately.

Signed-off-by: Aurelien Aptel aaptel@suse.com Cc: stable@vger.kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/cifs/smb2pdu.c | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -979,6 +979,13 @@ SMB2_negotiate(const unsigned int xid, s /* Internal types */ server->capabilities |= SMB2_NT_FIND | SMB2_LARGE_FILES;

+ /* + * SMB3.0 supports only 1 cipher and doesn't have a encryption neg context + * Set the cipher type manually. + */ + if (server->dialect == SMB30_PROT_ID && (server->capabilities & SMB2_GLOBAL_CAP_ENCRYPTION)) + server->cipher_type = SMB2_ENCRYPTION_AES128_CCM; + security_blob = smb2_get_data_area_len(&blob_offset, &blob_length, (struct smb2_sync_hdr *)rsp); /*

From: Rolf Eike Beer eb@emlix.com

commit 0ee74d5a48635c848c20f152d0d488bf84641304 upstream.

iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent errors.

Fixes: 39ab9555c2411 ("iommu: Add sysfs bindings for struct iommu_device") Cc: stable@vger.kernel.org # 4.11.x Signed-off-by: Rolf Eike Beer eb@emlix.com Acked-by: Lu Baolu baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/17411490.HIIP88n32C@mobilepool36.emlix.com Link: https://lore.kernel.org/r/20210525070802.361755-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iommu/dmar.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/iommu/dmar.c +++ b/drivers/iommu/dmar.c @@ -1110,7 +1110,7 @@ static int alloc_iommu(struct dmar_drhd_

err = iommu_device_register(&iommu->iommu); if (err) - goto err_unmap; + goto err_sysfs; }

drhd->iommu = iommu; @@ -1118,6 +1118,8 @@ static int alloc_iommu(struct dmar_drhd_

return 0;

+err_sysfs: + iommu_device_sysfs_remove(&iommu->iommu); err_unmap: unmap_iommu(iommu); error_free_seq_id:

From: Adrian Hunter adrian.hunter@intel.com

commit cb7987837c31b217b28089bbc78922d5c9187869 upstream.

When adding support for power events, some handling of FUP packets was unified. That resulted in breaking reporting of TSX aborts, by not considering the associated TIP packet. Fix that.

Example:

A machine that supports TSX is required. It will have flag "rtm". Kernel parameter tsx=on may be required.

# for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done rtm

Test program:

#include <stdio.h> #include <immintrin.h>

int main() { int x = 0;

if (_xbegin() == _XBEGIN_STARTED) { x = 1; _xabort(1); } else { printf("x = %d\n", x); } return 0; }

Compile with -mrtm i.e.

gcc -Wall -Wextra -mrtm xabort.c -o xabort

Record:

perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort

Before:

# perf script --itrace=be -F+flags,+addr,-period,-event --ns xabort 1478 [007] 92161.431348552: tr strt 0 [unknown] ([unknown]) => 400b6d main+0x0 (/root/xabort) xabort 1478 [007] 92161.431348624: jmp 400b96 main+0x29 (/root/xabort) => 400bae main+0x41 (/root/xabort) xabort 1478 [007] 92161.431348624: return 400bb4 main+0x47 (/root/xabort) => 400b87 main+0x1a (/root/xabort) xabort 1478 [007] 92161.431348637: jcc 400b8a main+0x1d (/root/xabort) => 400b98 main+0x2b (/root/xabort) xabort 1478 [007] 92161.431348644: tr end call 400ba9 main+0x3c (/root/xabort) => 40f690 printf+0x0 (/root/xabort) xabort 1478 [007] 92161.431360859: tr strt 0 [unknown] ([unknown]) => 400bae main+0x41 (/root/xabort) xabort 1478 [007] 92161.431360882: tr end return 400bb4 main+0x47 (/root/xabort) => 401139 __libc_start_main+0x309 (/root/xabort)

After:

# perf script --itrace=be -F+flags,+addr,-period,-event --ns xabort 1478 [007] 92161.431348552: tr strt 0 [unknown] ([unknown]) => 400b6d main+0x0 (/root/xabort) xabort 1478 [007] 92161.431348624: tx abrt 400b93 main+0x26 (/root/xabort) => 400b87 main+0x1a (/root/xabort) xabort 1478 [007] 92161.431348637: jcc 400b8a main+0x1d (/root/xabort) => 400b98 main+0x2b (/root/xabort) xabort 1478 [007] 92161.431348644: tr end call 400ba9 main+0x3c (/root/xabort) => 40f690 printf+0x0 (/root/xabort) xabort 1478 [007] 92161.431360859: tr strt 0 [unknown] ([unknown]) => 400bae main+0x41 (/root/xabort) xabort 1478 [007] 92161.431360882: tr end return 400bb4 main+0x47 (/root/xabort) => 401139 __libc_start_main+0x309 (/root/xabort)

Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets") Signed-off-by: Adrian Hunter adrian.hunter@intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Jiri Olsa jolsa@redhat.com Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210519074515.9262-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -1090,6 +1090,8 @@ static bool intel_pt_fup_event(struct in decoder->set_fup_tx_flags = false; decoder->tx_flags = decoder->fup_tx_flags; decoder->state.type = INTEL_PT_TRANSACTION; + if (decoder->fup_tx_flags & INTEL_PT_ABORT_TX) + decoder->state.type |= INTEL_PT_BRANCH; decoder->state.from_ip = decoder->ip; decoder->state.to_ip = 0; decoder->state.flags = decoder->fup_tx_flags; @@ -1164,8 +1166,10 @@ static int intel_pt_walk_fup(struct inte return 0; if (err == -EAGAIN || intel_pt_fup_with_nlip(decoder, &intel_pt_insn, ip, err)) { + bool no_tip = decoder->pkt_state != INTEL_PT_STATE_FUP; + decoder->pkt_state = INTEL_PT_STATE_IN_SYNC; - if (intel_pt_fup_event(decoder)) + if (intel_pt_fup_event(decoder) && no_tip) return 0; return -EAGAIN; }

From: Adrian Hunter adrian.hunter@intel.com

commit fd931b2e234a7cc451a7bbb1965d6ce623189158 upstream.

The 'Array' class is present in more than one python standard library. In some versions of Python 3, the following error occurs:

Traceback (most recent call last): File "tools/perf/scripts/python/exported-sql-viewer.py", line 4702, in <lambda> reports_menu.addAction(CreateAction(label, "Create a new window displaying branch events", lambda a=None,x=dbid: self.NewBranchView(x), self)) File "tools/perf/scripts/python/exported-sql-viewer.py", line 4727, in NewBranchView BranchWindow(self.glb, event_id, ReportVars(), self) File "tools/perf/scripts/python/exported-sql-viewer.py", line 3208, in __init__ self.model = LookupCreateModel(model_name, lambda: BranchModel(glb, event_id, report_vars.where_clause)) File "tools/perf/scripts/python/exported-sql-viewer.py", line 343, in LookupCreateModel model = create_fn() File "tools/perf/scripts/python/exported-sql-viewer.py", line 3208, in <lambda> self.model = LookupCreateModel(model_name, lambda: BranchModel(glb, event_id, report_vars.where_clause)) File "tools/perf/scripts/python/exported-sql-viewer.py", line 3124, in __init__ self.fetcher = SQLFetcher(glb, sql, prep, self.AddSample) File "tools/perf/scripts/python/exported-sql-viewer.py", line 2658, in __init__ self.buffer = Array(c_char, self.buffer_size, lock=False) TypeError: abstract class

This apparently happens because Python can be inconsistent about which class of the name 'Array' gets imported. Fix by importing explicitly by name so that only the desired 'Array' gets imported.

Fixes: 8392b74b575c3 ("perf scripts python: exported-sql-viewer.py: Add ability to display all the database tables") Signed-off-by: Adrian Hunter adrian.hunter@intel.com Cc: Jiri Olsa jolsa@redhat.com Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210521092053.25683-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/perf/scripts/python/exported-sql-viewer.py | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -122,8 +122,9 @@ if pyside_version_1: from PySide.QtGui import * from PySide.QtSql import *

-from decimal import * -from ctypes import * +from decimal import Decimal, ROUND_HALF_UP +from ctypes import CDLL, Structure, create_string_buffer, addressof, sizeof, \ + c_void_p, c_bool, c_byte, c_char, c_int, c_uint, c_longlong, c_ulonglong from multiprocessing import Process, Array, Value, Event

# xrange is range in Python3

From: Kees Cook keescook@chromium.org

commit bfb819ea20ce8bbeeba17e1a6418bf8bda91fc28 upstream.

Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/ files need to check the opener credentials, since these fds do not transition state across execve(). Without this, it is possible to trick another process (which may have different credentials) to write to its own /proc/$pid/attr/ files, leading to unexpected and possibly exploitable behaviors.

[1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=c...

Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/proc/base.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2556,6 +2556,10 @@ static ssize_t proc_pid_attr_write(struc void *page; int rv;

+ /* A task may only write when it was the opener. */ + if (file->f_cred != current_real_cred()) + return -EPERM; + rcu_read_lock(); task = pid_task(proc_pid(inode), PIDTYPE_PID); if (!task) {

From: Mathy Vanhoef Mathy.Vanhoef@kuleuven.be

commit 965a7d72e798eb7af0aa67210e37cf7ecd1c9cad upstream.

Do not mix plaintext and encrypted fragments in protected Wi-Fi networks. This fixes CVE-2020-26147.

Previously, an attacker was able to first forward a legitimate encrypted fragment towards a victim, followed by a plaintext fragment. The encrypted and plaintext fragment would then be reassembled. For further details see Section 6.3 and Appendix D in the paper "Fragment and Forge: Breaking Wi-Fi Through Frame Aggregation and Fragmentation".

Because of this change there are now two equivalent conditions in the code to determine if a received fragment requires sequential PNs, so we also move this test to a separate function to make the code easier to maintain.

Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef Mathy.Vanhoef@kuleuven.be Link: https://lore.kernel.org/r/20210511200110.30c4394bb835.I5acfdb552cc1d20c339c2... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/rx.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-)

--- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2154,6 +2154,16 @@ ieee80211_reassemble_find(struct ieee802 return NULL; }

+static bool requires_sequential_pn(struct ieee80211_rx_data *rx, __le16 fc) +{ + return rx->key && + (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP || + rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 || + rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP || + rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) && + ieee80211_has_protected(fc); +} + static ieee80211_rx_result debug_noinline ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) { @@ -2198,12 +2208,7 @@ ieee80211_rx_h_defragment(struct ieee802 /* This is the first fragment of a new frame. */ entry = ieee80211_reassemble_add(rx->sdata, frag, seq, rx->seqno_idx, &(rx->skb)); - if (rx->key && - (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP || - rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 || - rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP || - rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) && - ieee80211_has_protected(fc)) { + if (requires_sequential_pn(rx, fc)) { int queue = rx->security_idx;

/* Store CCMP/GCMP PN so that we can verify that the @@ -2245,11 +2250,7 @@ ieee80211_rx_h_defragment(struct ieee802 u8 pn[IEEE80211_CCMP_PN_LEN], *rpn; int queue;

- if (!rx->key || - (rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP && - rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP_256 && - rx->key->conf.cipher != WLAN_CIPHER_SUITE_GCMP && - rx->key->conf.cipher != WLAN_CIPHER_SUITE_GCMP_256)) + if (!requires_sequential_pn(rx, fc)) return RX_DROP_UNUSABLE; memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN); for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {

From: Mathy Vanhoef Mathy.Vanhoef@kuleuven.be

commit a1d5ff5651ea592c67054233b14b30bf4452999c upstream.

Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042 header. This can occur in practice when the destination MAC address equals AA:AA:03:00:00:00. More importantly, this simplifies the next patch to mitigate A-MSDU injection attacks.

Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef Mathy.Vanhoef@kuleuven.be Link: https://lore.kernel.org/r/20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec81... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/cfg80211.h | 4 ++-- net/mac80211/rx.c | 2 +- net/wireless/util.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)

--- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -5194,7 +5194,7 @@ unsigned int ieee80211_get_mesh_hdrlen(s */ int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, const u8 *addr, enum nl80211_iftype iftype, - u8 data_offset); + u8 data_offset, bool is_amsdu);

/** * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 @@ -5206,7 +5206,7 @@ int ieee80211_data_to_8023_exthdr(struct static inline int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype) { - return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0); + return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0, false); }

/** --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2634,7 +2634,7 @@ __ieee80211_rx_h_amsdu(struct ieee80211_ if (ieee80211_data_to_8023_exthdr(skb, &ethhdr, rx->sdata->vif.addr, rx->sdata->vif.type, - data_offset)) + data_offset, true)) return RX_DROP_UNUSABLE;

ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr, --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -451,7 +451,7 @@ EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen)

int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, const u8 *addr, enum nl80211_iftype iftype, - u8 data_offset) + u8 data_offset, bool is_amsdu) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct { @@ -539,7 +539,7 @@ int ieee80211_data_to_8023_exthdr(struct skb_copy_bits(skb, hdrlen, &payload, sizeof(payload)); tmp.h_proto = payload.proto;

- if (likely((ether_addr_equal(payload.hdr, rfc1042_header) && + if (likely((!is_amsdu && ether_addr_equal(payload.hdr, rfc1042_header) && tmp.h_proto != htons(ETH_P_AARP) && tmp.h_proto != htons(ETH_P_IPX)) || ether_addr_equal(payload.hdr, bridge_tunnel_header)))

From: Johannes Berg johannes.berg@intel.com

commit 270032a2a9c4535799736142e1e7c413ca7b836e upstream.

With old ciphers (WEP and TKIP) we shouldn't be using A-MSDUs since A-MSDUs are only supported if we know that they are, and the only practical way for that is HT support which doesn't support old ciphers.

However, we would normally accept them anyway. Since we check the MMIC before deaggregating A-MSDUs, and the A-MSDU bit in the QoS header is not protected in TKIP (or WEP), this enables attacks similar to CVE-2020-24588. To prevent that, drop A-MSDUs completely with old ciphers.

Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210511200110.076543300172.I548e6e71f1ee9cad4b9a3... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/rx.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)

--- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -6,7 +6,7 @@ * Copyright 2007-2010 Johannes Berg johannes@sipsolutions.net * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright(c) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018-2019 Intel Corporation + * Copyright (C) 2018-2021 Intel Corporation */

#include <linux/jiffies.h> @@ -2691,6 +2691,23 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx if (is_multicast_ether_addr(hdr->addr1)) return RX_DROP_UNUSABLE;

+ if (rx->key) { + /* + * We should not receive A-MSDUs on pre-HT connections, + * and HT connections cannot use old ciphers. Thus drop + * them, as in those cases we couldn't even have SPP + * A-MSDUs or such. + */ + switch (rx->key->conf.cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + case WLAN_CIPHER_SUITE_TKIP: + return RX_DROP_UNUSABLE; + default: + break; + } + } + return __ieee80211_rx_h_amsdu(rx, 0); }

From: Johannes Berg johannes.berg@intel.com

commit bf30ca922a0c0176007e074b0acc77ed345e9990 upstream.

As pointed out by Mathy Vanhoef, we implement the RX PN check on fragmented frames incorrectly - we check against the last received PN prior to the new frame, rather than to the one in this frame itself.

Prior patches addressed the security issue here, but in order to be able to reason better about the code, fix it to really compare against the current frame's PN, not the last stored one.

Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210511200110.bfbc340ff071.Id0b690e581da7d03d76df... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/ieee80211_i.h | 11 +++++++++-- net/mac80211/rx.c | 5 ++--- net/mac80211/wpa.c | 13 +++++++++---- 3 files changed, 20 insertions(+), 9 deletions(-)

--- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -222,8 +222,15 @@ struct ieee80211_rx_data { */ int security_idx;

- u32 tkip_iv32; - u16 tkip_iv16; + union { + struct { + u32 iv32; + u16 iv16; + } tkip; + struct { + u8 pn[IEEE80211_CCMP_PN_LEN]; + } ccm_gcm; + }; };

struct ieee80211_csa_settings { --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2268,7 +2268,6 @@ ieee80211_rx_h_defragment(struct ieee802 if (entry->check_sequential_pn) { int i; u8 pn[IEEE80211_CCMP_PN_LEN], *rpn; - int queue;

if (!requires_sequential_pn(rx, fc)) return RX_DROP_UNUSABLE; @@ -2283,8 +2282,8 @@ ieee80211_rx_h_defragment(struct ieee802 if (pn[i]) break; } - queue = rx->security_idx; - rpn = rx->key->u.ccmp.rx_pn[queue]; + + rpn = rx->ccm_gcm.pn; if (memcmp(pn, rpn, IEEE80211_CCMP_PN_LEN)) return RX_DROP_UNUSABLE; memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN); --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -3,6 +3,7 @@ * Copyright 2002-2004, Instant802 Networks, Inc. * Copyright 2008, Jouni Malinen j@w1.fi * Copyright (C) 2016-2017 Intel Deutschland GmbH + * Copyright (C) 2020-2021 Intel Corporation */

#include <linux/netdevice.h> @@ -167,8 +168,8 @@ ieee80211_rx_h_michael_mic_verify(struct

update_iv: /* update IV in key information to be able to detect replays */ - rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32; - rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16; + rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip.iv32; + rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip.iv16;

return RX_CONTINUE;

@@ -294,8 +295,8 @@ ieee80211_crypto_tkip_decrypt(struct iee key, skb->data + hdrlen, skb->len - hdrlen, rx->sta->sta.addr, hdr->addr1, hwaccel, rx->security_idx, - &rx->tkip_iv32, - &rx->tkip_iv16); + &rx->tkip.iv32, + &rx->tkip.iv16); if (res != TKIP_DECRYPT_OK) return RX_DROP_UNUSABLE;

@@ -553,6 +554,8 @@ ieee80211_crypto_ccmp_decrypt(struct iee }

memcpy(key->u.ccmp.rx_pn[queue], pn, IEEE80211_CCMP_PN_LEN); + if (unlikely(ieee80211_is_frag(hdr))) + memcpy(rx->ccm_gcm.pn, pn, IEEE80211_CCMP_PN_LEN); }

/* Remove CCMP header and MIC */ @@ -781,6 +784,8 @@ ieee80211_crypto_gcmp_decrypt(struct iee }

memcpy(key->u.gcmp.rx_pn[queue], pn, IEEE80211_GCMP_PN_LEN); + if (unlikely(ieee80211_is_frag(hdr))) + memcpy(rx->ccm_gcm.pn, pn, IEEE80211_CCMP_PN_LEN); }

/* Remove GCMP header and MIC */

From: Johannes Berg johannes.berg@intel.com

commit a8c4d76a8dd4fb9666fc8919a703d85fb8f44ed8 upstream.

EAPOL frames are used for authentication and key management between the AP and each individual STA associated in the BSS. Those frames are not supposed to be sent by one associated STA to another associated STA (either unicast for broadcast/multicast).

Similarly, in 802.11 they're supposed to be sent to the authenticator (AP) address.

Since it is possible for unexpected EAPOL frames to result in misbehavior in supplicant implementations, it is better for the AP to not allow such cases to be forwarded to other clients either directly, or indirectly if the AP interface is part of a bridge.

Accept EAPOL (control port) frames only if they're transmitted to the own address, or, due to interoperability concerns, to the PAE group address.

Disable forwarding of EAPOL (or well, the configured control port protocol) frames back to wireless medium in all cases. Previously, these frames were accepted from fully authenticated and authorized stations and also from unauthenticated stations for one of the cases.

Additionally, to avoid forwarding by the bridge, rewrite the PAE group address case to the local MAC address.

Cc: stable@vger.kernel.org Co-developed-by: Jouni Malinen jouni@codeaurora.org Signed-off-by: Jouni Malinen jouni@codeaurora.org Link: https://lore.kernel.org/r/20210511200110.cb327ed0cabe.Ib7dcffa2a31f0913d660d... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/rx.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-)

--- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2484,13 +2484,13 @@ static bool ieee80211_frame_allowed(stru struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;

/* - * Allow EAPOL frames to us/the PAE group address regardless - * of whether the frame was encrypted or not. + * Allow EAPOL frames to us/the PAE group address regardless of + * whether the frame was encrypted or not, and always disallow + * all other destination addresses for them. */ - if (ehdr->h_proto == rx->sdata->control_port_protocol && - (ether_addr_equal(ehdr->h_dest, rx->sdata->vif.addr) || - ether_addr_equal(ehdr->h_dest, pae_group_addr))) - return true; + if (unlikely(ehdr->h_proto == rx->sdata->control_port_protocol)) + return ether_addr_equal(ehdr->h_dest, rx->sdata->vif.addr) || + ether_addr_equal(ehdr->h_dest, pae_group_addr);

if (ieee80211_802_1x_port_control(rx) || ieee80211_drop_unencrypted(rx, fc)) @@ -2514,8 +2514,28 @@ static void ieee80211_deliver_skb_to_loc cfg80211_rx_control_port(dev, skb, noencrypt); dev_kfree_skb(skb); } else { + struct ethhdr *ehdr = (void *)skb_mac_header(skb); + memset(skb->cb, 0, sizeof(skb->cb));

+ /* + * 802.1X over 802.11 requires that the authenticator address + * be used for EAPOL frames. However, 802.1X allows the use of + * the PAE group address instead. If the interface is part of + * a bridge and we pass the frame with the PAE group address, + * then the bridge will forward it to the network (even if the + * client was not associated yet), which isn't supposed to + * happen. + * To avoid that, rewrite the destination address to our own + * address, so that the authenticator (e.g. hostapd) will see + * the frame, but bridge won't forward it anywhere else. Note + * that due to earlier filtering, the only other address can + * be the PAE group address. + */ + if (unlikely(skb->protocol == sdata->control_port_protocol && + !ether_addr_equal(ehdr->h_dest, sdata->vif.addr))) + ether_addr_copy(ehdr->h_dest, sdata->vif.addr); + /* deliver to local stack */ if (rx->napi) napi_gro_receive(rx->napi, skb); @@ -2555,6 +2575,7 @@ ieee80211_deliver_skb(struct ieee80211_r if ((sdata->vif.type == NL80211_IFTYPE_AP || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && !(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) && + ehdr->h_proto != rx->sdata->control_port_protocol && (sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->u.vlan.sta)) { if (is_multicast_ether_addr(ehdr->h_dest) && ieee80211_vif_get_num_mcast_if(sdata) != 0) {

From: Wen Gong wgong@codeaurora.org

commit a1166b2653db2f3de7338b9fb8a0f6e924b904ee upstream.

PN replay check for not fragmented frames is finished in the firmware, but this was not done for fragmented frames when ath10k is used with QCA6174/QCA6377 PCIe. mac80211 has the function ieee80211_rx_h_defragment() for PN replay check for fragmented frames, but this does not get checked with QCA6174 due to the ieee80211_has_protected() condition not matching the cleared Protected bit case.

Validate the PN of received fragmented frames within ath10k when CCMP is used and drop the fragment if the PN is not correct (incremented by exactly one from the previous fragment). This applies only for QCA6174/QCA6377 PCIe.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1

Cc: stable@vger.kernel.org Signed-off-by: Wen Gong wgong@codeaurora.org Signed-off-by: Jouni Malinen jouni@codeaurora.org Link: https://lore.kernel.org/r/20210511200110.9ba2664866a4.I756e47b67e210dba69966... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/ath/ath10k/htt.h | 1 drivers/net/wireless/ath/ath10k/htt_rx.c | 99 +++++++++++++++++++++++++++++-- 2 files changed, 96 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/ath/ath10k/htt.h +++ b/drivers/net/wireless/ath/ath10k/htt.h @@ -835,6 +835,7 @@ enum htt_security_types {

#define ATH10K_HTT_TXRX_PEER_SECURITY_MAX 2 #define ATH10K_TXRX_NUM_EXT_TIDS 19 +#define ATH10K_TXRX_NON_QOS_TID 16

enum htt_security_flags { #define HTT_SECURITY_TYPE_MASK 0x7F --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1739,16 +1739,87 @@ static void ath10k_htt_rx_h_csum_offload msdu->ip_summed = ath10k_htt_rx_get_csum_state(msdu); }

+static u64 ath10k_htt_rx_h_get_pn(struct ath10k *ar, struct sk_buff *skb, + u16 offset, + enum htt_rx_mpdu_encrypt_type enctype) +{ + struct ieee80211_hdr *hdr; + u64 pn = 0; + u8 *ehdr; + + hdr = (struct ieee80211_hdr *)(skb->data + offset); + ehdr = skb->data + offset + ieee80211_hdrlen(hdr->frame_control); + + if (enctype == HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2) { + pn = ehdr[0]; + pn |= (u64)ehdr[1] << 8; + pn |= (u64)ehdr[4] << 16; + pn |= (u64)ehdr[5] << 24; + pn |= (u64)ehdr[6] << 32; + pn |= (u64)ehdr[7] << 40; + } + return pn; +} + +static bool ath10k_htt_rx_h_frag_pn_check(struct ath10k *ar, + struct sk_buff *skb, + u16 peer_id, + u16 offset, + enum htt_rx_mpdu_encrypt_type enctype) +{ + struct ath10k_peer *peer; + union htt_rx_pn_t *last_pn, new_pn = {0}; + struct ieee80211_hdr *hdr; + bool more_frags; + u8 tid, frag_number; + u32 seq; + + peer = ath10k_peer_find_by_id(ar, peer_id); + if (!peer) { + ath10k_dbg(ar, ATH10K_DBG_HTT, "invalid peer for frag pn check\n"); + return false; + } + + hdr = (struct ieee80211_hdr *)(skb->data + offset); + if (ieee80211_is_data_qos(hdr->frame_control)) + tid = ieee80211_get_tid(hdr); + else + tid = ATH10K_TXRX_NON_QOS_TID; + + last_pn = &peer->frag_tids_last_pn[tid]; + new_pn.pn48 = ath10k_htt_rx_h_get_pn(ar, skb, offset, enctype); + more_frags = ieee80211_has_morefrags(hdr->frame_control); + frag_number = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; + seq = (__le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; + + if (frag_number == 0) { + last_pn->pn48 = new_pn.pn48; + peer->frag_tids_seq[tid] = seq; + } else { + if (seq != peer->frag_tids_seq[tid]) + return false; + + if (new_pn.pn48 != last_pn->pn48 + 1) + return false; + + last_pn->pn48 = new_pn.pn48; + } + + return true; +} + static void ath10k_htt_rx_h_mpdu(struct ath10k *ar, struct sk_buff_head *amsdu, struct ieee80211_rx_status *status, bool fill_crypt_header, u8 *rx_hdr, - enum ath10k_pkt_rx_err *err) + enum ath10k_pkt_rx_err *err, + u16 peer_id, + bool frag) { struct sk_buff *first; struct sk_buff *last; - struct sk_buff *msdu; + struct sk_buff *msdu, *temp; struct htt_rx_desc *rxd; struct ieee80211_hdr *hdr; enum htt_rx_mpdu_encrypt_type enctype; @@ -1761,6 +1832,7 @@ static void ath10k_htt_rx_h_mpdu(struct bool is_decrypted; bool is_mgmt; u32 attention; + bool frag_pn_check = true;

if (skb_queue_empty(amsdu)) return; @@ -1859,6 +1931,24 @@ static void ath10k_htt_rx_h_mpdu(struct }

skb_queue_walk(amsdu, msdu) { + if (frag && !fill_crypt_header && is_decrypted && + enctype == HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2) + frag_pn_check = ath10k_htt_rx_h_frag_pn_check(ar, + msdu, + peer_id, + 0, + enctype); + + if (!frag_pn_check) { + /* Discard the fragment with invalid PN */ + temp = msdu->prev; + __skb_unlink(msdu, amsdu); + dev_kfree_skb_any(msdu); + msdu = temp; + frag_pn_check = true; + continue; + } + ath10k_htt_rx_h_csum_offload(msdu); ath10k_htt_rx_h_undecap(ar, msdu, status, first_hdr, enctype, is_decrypted); @@ -2064,7 +2154,8 @@ static int ath10k_htt_rx_handle_amsdu(st ath10k_htt_rx_h_unchain(ar, &amsdu, &drop_cnt, &unchain_cnt);

ath10k_htt_rx_h_filter(ar, &amsdu, rx_status, &drop_cnt_filter); - ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status, true, first_hdr, &err); + ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status, true, first_hdr, &err, 0, + false); msdus_to_queue = skb_queue_len(&amsdu); ath10k_htt_rx_h_enqueue(ar, &amsdu, rx_status);

@@ -3014,7 +3105,7 @@ static int ath10k_htt_rx_in_ord_ind(stru ath10k_htt_rx_h_ppdu(ar, &amsdu, status, vdev_id); ath10k_htt_rx_h_filter(ar, &amsdu, status, NULL); ath10k_htt_rx_h_mpdu(ar, &amsdu, status, false, NULL, - NULL); + NULL, peer_id, frag); ath10k_htt_rx_h_enqueue(ar, &amsdu, status); break; case -EAGAIN:

From: Wen Gong wgong@codeaurora.org

commit 40e7462dad6f3d06efdb17d26539e61ab6e34db1 upstream.

Fragmentation is not used with multicast frames. Discard unexpected fragments with multicast DA. This fixes CVE-2020-26145.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049

Cc: stable@vger.kernel.org Signed-off-by: Wen Gong wgong@codeaurora.org Signed-off-by: Jouni Malinen jouni@codeaurora.org Link: https://lore.kernel.org/r/20210511200110.9ca6ca7945a9.I1e18b514590af17c155bd... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/ath/ath10k/htt_rx.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -2605,6 +2605,13 @@ static bool ath10k_htt_rx_proc_rx_frag_i rx_desc = (struct htt_hl_rx_desc *)(skb->data + tot_hdr_len); rx_desc_info = __le32_to_cpu(rx_desc->info);

+ hdr = (struct ieee80211_hdr *)((u8 *)rx_desc + rx_hl->fw_desc.len); + + if (is_multicast_ether_addr(hdr->addr1)) { + /* Discard the fragment with multicast DA */ + goto err; + } + if (!MS(rx_desc_info, HTT_RX_DESC_HL_INFO_ENCRYPTED)) { spin_unlock_bh(&ar->data_lock); return ath10k_htt_rx_proc_rx_ind_hl(htt, &resp->rx_ind_hl, skb, @@ -2612,8 +2619,6 @@ static bool ath10k_htt_rx_proc_rx_frag_i HTT_RX_NON_TKIP_MIC); }

- hdr = (struct ieee80211_hdr *)((u8 *)rx_desc + rx_hl->fw_desc.len); - if (ieee80211_has_retry(hdr->frame_control)) goto err;

From: Wen Gong wgong@codeaurora.org

commit 0dc267b13f3a7e8424a898815dd357211b737330 upstream.

TKIP Michael MIC was not verified properly for PCIe cases since the validation steps in ieee80211_rx_h_michael_mic_verify() in mac80211 did not get fully executed due to unexpected flag values in ieee80211_rx_status.

Fix this by setting the flags property to meet mac80211 expectations for performing Michael MIC validation there. This fixes CVE-2020-26141. It does the same as ath10k_htt_rx_proc_rx_ind_hl() for SDIO which passed MIC verification case. This applies only to QCA6174/QCA9377 PCIe.

Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1

Cc: stable@vger.kernel.org Signed-off-by: Wen Gong wgong@codeaurora.org Signed-off-by: Jouni Malinen jouni@codeaurora.org Link: https://lore.kernel.org/r/20210511200110.c3f1d42c6746.I795593fcaae941c471425... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/ath/ath10k/htt_rx.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

--- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1967,6 +1967,11 @@ static void ath10k_htt_rx_h_mpdu(struct }

ath10k_htt_rx_h_csum_offload(msdu); + + if (frag && !fill_crypt_header && + enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA) + status->flag &= ~RX_FLAG_MMIC_STRIPPED; + ath10k_htt_rx_h_undecap(ar, msdu, status, first_hdr, enctype, is_decrypted);

@@ -1984,6 +1989,11 @@ static void ath10k_htt_rx_h_mpdu(struct

hdr = (void *)msdu->data; hdr->frame_control &= ~__cpu_to_le16(IEEE80211_FCTL_PROTECTED); + + if (frag && !fill_crypt_header && + enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA) + status->flag &= ~RX_FLAG_IV_STRIPPED & + ~RX_FLAG_MMIC_STRIPPED; } }

From: Mikulas Patocka mpatocka@redhat.com

commit 7e768532b2396bcb7fbf6f82384b85c0f1d2f197 upstream.

If an origin target has no snapshots, o->split_boundary is set to 0. This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().

Fix this by initializing chunk_size, and in turn split_boundary, to rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits into "unsigned" type.

Signed-off-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-snap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -854,7 +854,7 @@ static int dm_add_exception(void *contex static uint32_t __minimum_chunk_size(struct origin *o) { struct dm_snapshot *snap; - unsigned chunk_size = 0; + unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);

if (o) list_for_each_entry(snap, &o->snapshots, list)

From: James Zhu James.Zhu@amd.com

commit 0c6013377b4027e69d8f3e63b6bf556b6cb87802 upstream.

Add cancel_delayed_work_sync before set power gating state to avoid race condition issue when power gating.

Signed-off-by: James Zhu James.Zhu@amd.com Reviewed-by: Leo Liu leo.liu@amd.com Acked-by: Christian König christian.koenig@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c @@ -293,6 +293,8 @@ static int vcn_v2_0_hw_fini(void *handle struct amdgpu_ring *ring = &adev->vcn.inst->ring_dec; int i;

+ cancel_delayed_work_sync(&adev->vcn.idle_work); + if ((adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG) || (adev->vcn.cur_state != AMD_PG_STATE_GATE && RREG32_SOC15(VCN, 0, mmUVD_STATUS)))

From: Michael Ellerman mpe@ellerman.id.au

[ Upstream commit ff2c395b9257f0e617f9cd212893f3c72c80ee6c ]

Use TEST_GEN_PROGS_EXTENDED rather than TEST_PROGS_EXTENDED.

That tells the lib.mk logic that the files it references are to be generated by the Makefile.

Having done that we don't need to override the all rule.

Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/gpio/Makefile | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile index 0bb80619db58..1963beaf5119 100644 --- a/tools/testing/selftests/gpio/Makefile +++ b/tools/testing/selftests/gpio/Makefile @@ -11,22 +11,20 @@ LDLIBS += $(MOUNT_LDLIBS)

TEST_PROGS := gpio-mockup.sh TEST_FILES := gpio-mockup-sysfs.sh -TEST_PROGS_EXTENDED := gpio-mockup-chardev +TEST_GEN_PROGS_EXTENDED := gpio-mockup-chardev

GPIODIR := $(realpath ../../../gpio) GPIOOBJ := gpio-utils.o

-all: $(TEST_PROGS_EXTENDED) - override define CLEAN - $(RM) $(TEST_PROGS_EXTENDED) + $(RM) $(TEST_GEN_PROGS_EXTENDED) $(MAKE) -C $(GPIODIR) OUTPUT=$(GPIODIR)/ clean endef

KSFT_KHDR_INSTALL := 1 include ../lib.mk

-$(TEST_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ) +$(TEST_GEN_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ)

$(GPIODIR)/$(GPIOOBJ): $(MAKE) OUTPUT=$(GPIODIR)/ -C $(GPIODIR)

From: Michael Ellerman mpe@ellerman.id.au

[ Upstream commit b68c1c65dec5fb5186ebd33ce52059b4c6db8500 ]

Currently the gpio selftests fail to build if the source tree is read only:

make -j 160 -C tools/testing/selftests TARGETS=gpio make[1]: Entering directory '/linux/tools/testing/selftests/gpio' make OUTPUT=/linux/tools/gpio/ -C /linux/tools/gpio make[2]: Entering directory '/linux/tools/gpio' mkdir -p /linux/tools/gpio/include/linux 2>&1 || true ln -sf /linux/tools/gpio/../../include/uapi/linux/gpio.h /linux/tools/gpio/include/linux/gpio.h ln: failed to create symbolic link '/linux/tools/gpio/include/linux/gpio.h': Read-only file system

This happens because we ask make to build ../../../gpio (tools/gpio) without pointing OUTPUT away from the source directory.

To fix it we create a subdirectory of the existing OUTPUT directory, called tools-gpio, and tell tools/gpio to build in there.

Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/gpio/Makefile | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile index 0b739bb4f2ad..f270b6abd64c 100644 --- a/tools/testing/selftests/gpio/Makefile +++ b/tools/testing/selftests/gpio/Makefile @@ -17,14 +17,18 @@ KSFT_KHDR_INSTALL := 1 include ../lib.mk

GPIODIR := $(realpath ../../../gpio) -GPIOOBJ := gpio-utils.o +GPIOOUT := $(OUTPUT)/tools-gpio/ +GPIOOBJ := $(GPIOOUT)/gpio-utils.o

override define CLEAN $(RM) $(TEST_GEN_PROGS_EXTENDED) - $(MAKE) -C $(GPIODIR) OUTPUT=$(GPIODIR)/ clean + $(RM) -rf $(GPIOOUT) endef

-$(TEST_GEN_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ) +$(TEST_GEN_PROGS_EXTENDED): $(GPIOOBJ)

-$(GPIODIR)/$(GPIOOBJ): - $(MAKE) OUTPUT=$(GPIODIR)/ -C $(GPIODIR) +$(GPIOOUT): + mkdir -p $@ + +$(GPIOOBJ): $(GPIOOUT) + $(MAKE) OUTPUT=$(GPIOOUT) -C $(GPIODIR)

From: Sargun Dhillon sargun@sargun.me

commit aac902925ea646e461c95edc98a8a57eb0def917 upstream.

The documentation had some previously incorrect information about how userspace notifications (and responses) were handled due to a change from a previously proposed patchset.

Signed-off-by: Sargun Dhillon sargun@sargun.me Acked-by: Tycho Andersen tycho@tycho.pizza Acked-by: Christian Brauner christian.brauner@ubuntu.com Signed-off-by: Kees Cook keescook@chromium.org Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210517193908.3113-2-sargun@sargun.me Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/userspace-api/seccomp_filter.rst | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/Documentation/userspace-api/seccomp_filter.rst +++ b/Documentation/userspace-api/seccomp_filter.rst @@ -250,14 +250,14 @@ Users can read via ``ioctl(SECCOMP_IOCTL seccomp notification fd to receive a ``struct seccomp_notif``, which contains five members: the input length of the structure, a unique-per-filter ``id``, the ``pid`` of the task which triggered this request (which may be 0 if the -task is in a pid ns not visible from the listener's pid namespace), a ``flags`` -member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing -whether or not the notification is a result of a non-fatal signal, and the -``data`` passed to seccomp. Userspace can then make a decision based on this -information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a -response, indicating what should be returned to userspace. The ``id`` member of -``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct -seccomp_notif``. +task is in a pid ns not visible from the listener's pid namespace). The +notification also contains the ``data`` passed to seccomp, and a filters flag. +The structure should be zeroed out prior to calling the ioctl. + +Userspace can then make a decision based on this information about what to do, +and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a response, indicating what should be +returned to userspace. The ``id`` member of ``struct seccomp_notif_resp`` should +be the same ``id`` as in ``struct seccomp_notif``.

It is worth noting that ``struct seccomp_data`` contains the values of register arguments to the syscall, but does not contain pointers to memory. The task's

From: Dongliang Mu mudongliangabcd@gmail.com

commit dcb4b8ad6a448532d8b681b5d1a7036210b622de upstream.

uss720_probe forgets to decrease the refcount of usbdev in uss720_probe. Fix this by decreasing the refcount of usbdev by usb_put_dev.

BUG: memory leak unreferenced object 0xffff888101113800 (size 2048): comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s) hex dump (first 32 bytes): ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1........... 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................ backtrace: [<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline] [<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline] [<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582 [<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline] [<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline] [<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline] [<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591 [<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275 [<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421 [<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292 [<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

Fixes: 0f36163d3abe ("[PATCH] usb: fix uss720 schedule with interrupts off") Cc: stable stable@vger.kernel.org Reported-by: syzbot+636c58f40a86b4a879e7@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu mudongliangabcd@gmail.com Link: https://lore.kernel.org/r/20210514124348.6587-1-mudongliangabcd@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/misc/uss720.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -736,6 +736,7 @@ static int uss720_probe(struct usb_inter parport_announce_port(pp);

usb_set_intfdata(intf, pp); + usb_put_dev(usbdev); return 0;

probe_abort:

From: Alexander Usyskin alexander.usyskin@intel.com

commit bbf0a94744edfeee298e4a9ab6fd694d639a5cdf upstream.

A rx flow control waiting in the control queue may block autosuspend. Re-request autosuspend after flow control been sent to unblock the transition to the low power state.

Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin alexander.usyskin@intel.com Signed-off-by: Tomas Winkler tomas.winkler@intel.com Link: https://lore.kernel.org/r/20210526193334.445759-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/misc/mei/interrupt.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -222,6 +222,9 @@ static int mei_cl_irq_read(struct mei_cl return ret; }

+ pm_runtime_mark_last_busy(dev->dev); + pm_request_autosuspend(dev->dev); + list_move_tail(&cb->list, &cl->rd_pending);

return 0;

From: Rui Miguel Silva rui.silva@linaro.org

commit 2a54c8c9ebc2006bf72554afc84ffc67768979a0 upstream.

If we fail to read temperature or axis we need to decrement the runtime pm reference count to trigger autosuspend.

Add the call to pm_put to do that in case of error.

Fixes: a0701b6263ae ("iio: gyro: add core driver for fxas21002c") Suggested-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Rui Miguel Silva rui.silva@linaro.org Link: https://lore.kernel.org/linux-iio/CBBZA9T1OY9C.2611WSV49DV2G@arch-thunder/ Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/gyro/fxas21002c_core.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/iio/gyro/fxas21002c_core.c +++ b/drivers/iio/gyro/fxas21002c_core.c @@ -333,6 +333,7 @@ static int fxas21002c_temp_get(struct fx ret = regmap_field_read(data->regmap_fields[F_TEMP], &temp); if (ret < 0) { dev_err(dev, "failed to read temp: %d\n", ret); + fxas21002c_pm_put(data); goto data_unlock; }

@@ -366,6 +367,7 @@ static int fxas21002c_axis_get(struct fx &axis_be, sizeof(axis_be)); if (ret < 0) { dev_err(dev, "failed to read axis: %d: %d\n", index, ret); + fxas21002c_pm_put(data); goto data_unlock; }

From: Jonathan Cameron Jonathan.Cameron@huawei.com

commit 4573472315f0fa461330545ff2aa2f6da0b1ae76 upstream.

If the devm_regulator_get() call succeeded but not the regulator_enable() then regulator_disable() would be called on a regulator that was not enabled.

Fix this by moving regulator enabling / disabling over to devm_ management via devm_add_action_or_reset.

Alexandru's sign-off here because he pulled Jonathan's patch into a larger set which Jonathan then applied.

Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support") Reviewed-by: Alexandru Ardelean ardeleanalex@gmail.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Alexandru Ardelean aardelean@deviqon.com Cc: Stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/ad7124.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-)

--- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -564,6 +564,11 @@ static int ad7124_setup(struct ad7124_st return ret; }

+static void ad7124_reg_disable(void *r) +{ + regulator_disable(r); +} + static int ad7124_probe(struct spi_device *spi) { const struct spi_device_id *id; @@ -607,17 +612,20 @@ static int ad7124_probe(struct spi_devic ret = regulator_enable(st->vref[i]); if (ret) return ret; + + ret = devm_add_action_or_reset(&spi->dev, ad7124_reg_disable, + st->vref[i]); + if (ret) + return ret; }

st->mclk = devm_clk_get(&spi->dev, "mclk"); - if (IS_ERR(st->mclk)) { - ret = PTR_ERR(st->mclk); - goto error_regulator_disable; - } + if (IS_ERR(st->mclk)) + return PTR_ERR(st->mclk);

ret = clk_prepare_enable(st->mclk); if (ret < 0) - goto error_regulator_disable; + return ret;

ret = ad7124_soft_reset(st); if (ret < 0) @@ -643,11 +651,6 @@ error_remove_trigger: ad_sd_cleanup_buffer_and_trigger(indio_dev); error_clk_disable_unprepare: clk_disable_unprepare(st->mclk); -error_regulator_disable: - for (i = ARRAY_SIZE(st->vref) - 1; i >= 0; i--) { - if (!IS_ERR_OR_NULL(st->vref[i])) - regulator_disable(st->vref[i]); - }

return ret; } @@ -656,17 +659,11 @@ static int ad7124_remove(struct spi_devi { struct iio_dev *indio_dev = spi_get_drvdata(spi); struct ad7124_state *st = iio_priv(indio_dev); - int i;

iio_device_unregister(indio_dev); ad_sd_cleanup_buffer_and_trigger(indio_dev); clk_disable_unprepare(st->mclk);

- for (i = ARRAY_SIZE(st->vref) - 1; i >= 0; i--) { - if (!IS_ERR_OR_NULL(st->vref[i])) - regulator_disable(st->vref[i]); - } - return 0; }

From: YueHaibing yuehaibing@huawei.com

commit 4ed243b1da169bcbc1ec5507867e56250c5f1ff9 upstream.

Set error code while device ID query failed.

Fixes: 88bc30548aae ("IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC") Signed-off-by: YueHaibing yuehaibing@huawei.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/ad7793.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -278,6 +278,7 @@ static int ad7793_setup(struct iio_dev * id &= AD7793_ID_MASK;

if (id != st->chip_info->id) { + ret = -ENODEV; dev_err(&st->sd.spi->dev, "device ID query failed\n"); goto out; }

From: Christian Gmeiner christian.gmeiner@gmail.com

commit 9808f9be31c68af43f6e531f2c851ebb066513fe upstream.

In commit 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support") the way the irq gets allocated was changed. With that change the handling FL_NOIRQ got lost. Restore the old behaviour.

Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support") Cc: stable@vger.kernel.org Signed-off-by: Christian Gmeiner christian.gmeiner@gmail.com Link: https://lore.kernel.org/r/20210527095529.26281-1-christian.gmeiner@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_pci.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -3917,21 +3917,26 @@ pciserial_init_ports(struct pci_dev *dev uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; uart.port.uartclk = board->base_baud * 16;

- if (pci_match_id(pci_use_msi, dev)) { - dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n"); - pci_set_master(dev); - rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); + if (board->flags & FL_NOIRQ) { + uart.port.irq = 0; } else { - dev_dbg(&dev->dev, "Using legacy interrupts\n"); - rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); - } - if (rc < 0) { - kfree(priv); - priv = ERR_PTR(rc); - goto err_deinit; + if (pci_match_id(pci_use_msi, dev)) { + dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n"); + pci_set_master(dev); + rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); + } else { + dev_dbg(&dev->dev, "Using legacy interrupts\n"); + rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); + } + if (rc < 0) { + kfree(priv); + priv = ERR_PTR(rc); + goto err_deinit; + } + + uart.port.irq = pci_irq_vector(dev, 0); }

- uart.port.irq = pci_irq_vector(dev, 0); uart.port.dev = &dev->dev;

for (i = 0; i < nr_ports; i++) {

From: Alan Stern stern@rowland.harvard.edu

commit 4f2629ea67e7225c3fd292c7fe4f5b3c9d6392de upstream.

Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly.

In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers.

To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers.

CC: Andrew Morton akpm@linux-foundation.org CC: stable@vger.kernel.org Reported-and-tested-by: syzbot+882a85c0c8ec4a3e2281@syzkaller.appspotmail.com Signed-off-by: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/20210518201835.GA1140918@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/devio.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1218,7 +1218,12 @@ static int proc_bulk(struct usb_dev_stat ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb)); if (ret) return ret; - tbuf = kmalloc(len1, GFP_KERNEL); + + /* + * len1 can be almost arbitrarily large. Don't WARN if it's + * too big, just fail the request. + */ + tbuf = kmalloc(len1, GFP_KERNEL | __GFP_NOWARN); if (!tbuf) { ret = -ENOMEM; goto done; @@ -1691,7 +1696,7 @@ static int proc_do_submiturb(struct usb_ if (num_sgs) { as->urb->sg = kmalloc_array(num_sgs, sizeof(struct scatterlist), - GFP_KERNEL); + GFP_KERNEL | __GFP_NOWARN); if (!as->urb->sg) { ret = -ENOMEM; goto error; @@ -1726,7 +1731,7 @@ static int proc_do_submiturb(struct usb_ (uurb_start - as->usbm->vm_start); } else { as->urb->transfer_buffer = kmalloc(uurb->buffer_length, - GFP_KERNEL); + GFP_KERNEL | __GFP_NOWARN); if (!as->urb->transfer_buffer) { ret = -ENOMEM; goto error;

From: Geert Uytterhoeven geert+renesas@glider.be

commit 2ea2e019c190ee3973ef7bcaf829d8762e56e635 upstream.

The Receive FIFO Data Count Trigger field (RTRG[6:0]) in the Receive FIFO Data Count Trigger Register (HSRTRGR) of HSCIF can only hold values ranging from 0-127. As the FIFO size is equal to 128 on HSCIF, the user can write an out-of-range value, touching reserved bits.

Fix this by limiting the trigger value to the FIFO size minus one. Reverse the order of the checks, to avoid rx_trig becoming zero if the FIFO size is one.

Note that this change has no impact on other SCIF variants, as their maximum supported trigger value is lower than the FIFO size anyway, and the code below takes care of enforcing these limits.

Fixes: a380ed461f66d1b8 ("serial: sh-sci: implement FIFO threshold register setting") Reported-by: Linh Phung linh.phung.jy@renesas.com Reviewed-by: Wolfram Sang wsa+renesas@sang-engineering.com Reviewed-by: Ulrich Hecht uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/5eff320aef92ffb33d00e57979fd3603bbb4a70f.162064821... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/sh-sci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1026,10 +1026,10 @@ static int scif_set_rtrg(struct uart_por { unsigned int bits;

+ if (rx_trig >= port->fifosize) + rx_trig = port->fifosize - 1; if (rx_trig < 1) rx_trig = 1; - if (rx_trig >= port->fifosize) - rx_trig = port->fifosize;

/* HSCIF can be set to an arbitrary level. */ if (sci_getreg(port, HSRTRGR)->size) {

From: Sean MacLennan seanm@seanm.ca

commit 89b1a3d811e6f8065d6ae8a25e7682329b4a31e2 upstream.

This adds support for the Startech.com generic serial to USB converter. It seems to be a bone stock TI_3410. I have been using this patch for years.

Signed-off-by: Sean MacLennan seanm@seanm.ca Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/ti_usb_3410_5052.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -37,6 +37,7 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 #define IBM_VENDOR_ID 0x04b3 +#define STARTECH_VENDOR_ID 0x14b0 #define TI_3410_PRODUCT_ID 0x3410 #define IBM_4543_PRODUCT_ID 0x4543 #define IBM_454B_PRODUCT_ID 0x454b @@ -372,6 +373,7 @@ static const struct usb_device_id ti_id_ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) }, { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) }, { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) }, + { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) }, { } /* terminator */ };

@@ -410,6 +412,7 @@ static const struct usb_device_id ti_id_ { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) }, { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) }, { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) }, + { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) }, { } /* terminator */ };

From: Dominik Andreas Schorpp dominik.a.schorpp@ids.de

commit c5a80540e425a5f9a82b0f3163e3b6a4331f33bc upstream.

Add the IDS GmbH Vendor ID and the Product IDs for SI31A (2xRS232) and CM31A (LoRaWAN Modem).

Signed-off-by: Dominik Andreas Schorpp dominik.a.schorpp@ids.de Signed-off-by: Juergen Borleis jbe@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++ 2 files changed, 10 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1034,6 +1034,9 @@ static const struct usb_device_id id_tab /* Sienna devices */ { USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) }, { USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) }, + /* IDS GmbH devices */ + { USB_DEVICE(IDS_VID, IDS_SI31A_PID) }, + { USB_DEVICE(IDS_VID, IDS_CM31A_PID) }, /* U-Blox devices */ { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) }, { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) }, --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1568,6 +1568,13 @@ #define UNJO_ISODEBUG_V1_PID 0x150D

/* + * IDS GmbH + */ +#define IDS_VID 0x2CAF +#define IDS_SI31A_PID 0x13A2 +#define IDS_CM31A_PID 0x13A3 + +/* * U-Blox products (http://www.u-blox.com). */ #define UBLOX_VID 0x1546

From: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com

commit eb8500b874cf295971a6a2a04e14eb0854197a3c upstream.

After commit 81ad4276b505 ("Thermal: Ignore invalid trip points") all user_space governor notifications via RW trip point is broken in intel thermal drivers. This commits marks trip_points with value of 0 during call to thermal_zone_device_register() as invalid. RW trip points can be 0 as user space will set the correct trip temperature later.

During driver init, x86_package_temp and all int340x drivers sets RW trip temperature as 0. This results in all these trips marked as invalid by the thermal core.

To fix this initialize RW trips to THERMAL_TEMP_INVALID instead of 0.

Cc: stable@vger.kernel.org Signed-off-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Link: https://lore.kernel.org/r/20210430122343.1789899-1-srinivas.pandruvada@linux... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c | 4 ++++ drivers/thermal/intel/x86_pkg_temp_thermal.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c +++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c @@ -230,6 +230,8 @@ struct int34x_thermal_zone *int340x_ther if (ACPI_FAILURE(status)) trip_cnt = 0; else { + int i; + int34x_thermal_zone->aux_trips = kcalloc(trip_cnt, sizeof(*int34x_thermal_zone->aux_trips), @@ -240,6 +242,8 @@ struct int34x_thermal_zone *int340x_ther } trip_mask = BIT(trip_cnt) - 1; int34x_thermal_zone->aux_trip_nr = trip_cnt; + for (i = 0; i < trip_cnt; ++i) + int34x_thermal_zone->aux_trips[i] = THERMAL_TEMP_INVALID; }

trip_cnt = int340x_thermal_read_trips(int34x_thermal_zone); --- a/drivers/thermal/intel/x86_pkg_temp_thermal.c +++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c @@ -164,7 +164,7 @@ static int sys_get_trip_temp(struct ther if (thres_reg_value) *temp = zonedev->tj_max - thres_reg_value * 1000; else - *temp = 0; + *temp = THERMAL_TEMP_INVALID; pr_debug("sys_get_trip_temp %d\n", *temp);

return 0;

From: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com

commit e752dbc59e1241b13b8c4f7b6eb582862e7668fe upstream.

The usb3_start_pipen() is called by renesas_usb3_ep_queue() and usb3_request_done_pipen() so that usb3_start_pipen() is possible to cause a race when getting usb3_first_req like below:

renesas_usb3_ep_queue() spin_lock_irqsave() list_add_tail() spin_unlock_irqrestore() usb3_start_pipen() usb3_first_req = usb3_get_request() --- [1] --- interrupt --- usb3_irq_dma_int() usb3_request_done_pipen() usb3_get_request() usb3_start_pipen() usb3_first_req = usb3_get_request() ... (the req is possible to be finished in the interrupt)

The usb3_first_req [1] above may have been finished after the interrupt ended so that this driver caused to start a transfer wrongly. To fix this issue, getting/checking the usb3_first_req are under spin_lock_irqsave() in the same section.

Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: stable stable@vger.kernel.org Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Link: https://lore.kernel.org/r/20210524060155.1178724-1-yoshihiro.shimoda.uh@rene... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/udc/renesas_usb3.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -1473,7 +1473,7 @@ static void usb3_start_pipen(struct rene struct renesas_usb3_request *usb3_req) { struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); - struct renesas_usb3_request *usb3_req_first = usb3_get_request(usb3_ep); + struct renesas_usb3_request *usb3_req_first; unsigned long flags; int ret = -EAGAIN; u32 enable_bits = 0; @@ -1481,7 +1481,8 @@ static void usb3_start_pipen(struct rene spin_lock_irqsave(&usb3->lock, flags); if (usb3_ep->halt || usb3_ep->started) goto out; - if (usb3_req != usb3_req_first) + usb3_req_first = __usb3_get_request(usb3_ep); + if (!usb3_req_first || usb3_req != usb3_req_first) goto out;

if (usb3_pn_change(usb3, usb3_ep->num) < 0)

From: Lukas Wunner lukas@wunner.de

commit 8f96c434dfbc85ffa755d6634c8c1cb2233fcf24 upstream.

spi_geni_remove() accesses the driver's private data after calling spi_unregister_master() even though that function releases the last reference on the spi_master and thereby frees the private data.

Moreover, since commit 1a9e489e6128 ("spi: spi-geni-qcom: Use OPP API to set clk/perf state"), spi_geni_probe() leaks the spi_master allocation if the calls to dev_pm_opp_set_clkname() or dev_pm_opp_of_add_table() fail.

Fix by switching over to the new devm_spi_alloc_master() helper which keeps the private data accessible until the driver has unbound and also avoids the spi_master leak on probe.

Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP") Signed-off-by: Lukas Wunner lukas@wunner.de Cc: stable@vger.kernel.org # v4.20+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation Cc: stable@vger.kernel.org # v4.20+ Cc: Rajendra Nayak rnayak@codeaurora.org Cc: Girish Mahadevan girishm@codeaurora.org Link: https://lore.kernel.org/r/dfa1d8c41b8acdfad87ec8654cd124e6e3cb3f31.160728688... Signed-off-by: Mark Brown broonie@kernel.org [lukas: backport to v5.4.123] Signed-off-by: Lukas Wunner lukas@wunner.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/spi/spi-geni-qcom.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -552,7 +552,7 @@ static int spi_geni_probe(struct platfor return PTR_ERR(clk); }

- spi = spi_alloc_master(&pdev->dev, sizeof(*mas)); + spi = devm_spi_alloc_master(&pdev->dev, sizeof(*mas)); if (!spi) return -ENOMEM;

@@ -599,7 +599,6 @@ spi_geni_probe_free_irq: free_irq(mas->irq, spi); spi_geni_probe_runtime_disable: pm_runtime_disable(&pdev->dev); - spi_master_put(spi); return ret; }

From: zhouchuangao zhouchuangao@vivo.com

commit bb002388901151fe35b6697ab116f6ed0721a9ed upstream.

We set the state of the current process to TASK_KILLABLE via prepare_to_wait(). Should we use fatal_signal_pending() to detect the signal here?

Fixes: b4868b44c562 ("NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE") Signed-off-by: zhouchuangao zhouchuangao@vivo.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/nfs/nfs4proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1647,7 +1647,7 @@ static void nfs_set_open_stateid_locked( rcu_read_unlock(); trace_nfs4_open_stateid_update_wait(state->inode, stateid, 0);

- if (!signal_pending(current)) { + if (!fatal_signal_pending(current)) { if (schedule_timeout(5*HZ) == 0) status = -EAGAIN; else @@ -3416,7 +3416,7 @@ static bool nfs4_refresh_open_old_statei write_sequnlock(&state->seqlock); trace_nfs4_close_stateid_update_wait(state->inode, dst, 0);

- if (signal_pending(current)) + if (fatal_signal_pending(current)) status = -EINTR; else if (schedule_timeout(5*HZ) != 0)

From: Trond Myklebust trond.myklebust@hammerspace.com

commit 56517ab958b7c11030e626250c00b9b1a24b41eb upstream.

Ensure that nfs_pageio_error_cleanup() resets the mirror array contents, so that the structure reflects the fact that it is now empty. Also change the test in nfs_pageio_do_add_request() to be more robust by checking whether or not the list is empty rather than relying on the value of pg_count.

Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer") Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/nfs/pagelist.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -986,15 +986,16 @@ static int nfs_pageio_do_add_request(str

struct nfs_page *prev = NULL;

- if (mirror->pg_count != 0) { - prev = nfs_list_entry(mirror->pg_list.prev); - } else { + if (list_empty(&mirror->pg_list)) { if (desc->pg_ops->pg_init) desc->pg_ops->pg_init(desc, req); if (desc->pg_error < 0) return 0; mirror->pg_base = req->wb_pgbase; - } + mirror->pg_count = 0; + mirror->pg_recoalesce = 0; + } else + prev = nfs_list_entry(mirror->pg_list.prev);

if (desc->pg_maxretrans && req->wb_nio > desc->pg_maxretrans) { if (NFS_SERVER(desc->pg_inode)->flags & NFS_MOUNT_SOFTERR)

From: Zhang Xiaoxu zhangxiaoxu5@huawei.com

commit e67afa7ee4a59584d7253e45d7f63b9528819a13 upstream.

Since commit bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors"), nfs42_proc_llseek would return -EOPNOTSUPP rather than -ENOTSUPP when SEEK_DATA on NFSv4.0/v4.1.

This will lead xfstests generic/285 not run on NFSv4.0/v4.1 when set the CONFIG_NFS_V4_2, rather than run failed.

Fixes: bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors") Cc: <stable.vger.kernel.org> # 4.2 Signed-off-by: Zhang Xiaoxu zhangxiaoxu5@huawei.com Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/nfs/nfs4file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs4file.c +++ b/fs/nfs/nfs4file.c @@ -168,7 +168,7 @@ static loff_t nfs4_file_llseek(struct fi case SEEK_HOLE: case SEEK_DATA: ret = nfs42_proc_llseek(filep, offset, whence); - if (ret != -ENOTSUPP) + if (ret != -EOPNOTSUPP) return ret; /* Fall through */ default:

From: Dima Chumak dchumak@nvidia.com

commit 97817fcc684ed01497bd19d0cd4dea699665b9cf upstream.

When handling FIB_EVENT_ENTRY_REPLACE event for a new multipath route, lag activation can be missed if a stale (struct lag_mp)->mfi pointer exists, which was associated with an older multipath route that had been removed.

Normally, when a route is removed, it triggers mlx5_lag_fib_event(), which handles FIB_EVENT_ENTRY_DEL and clears mfi pointer. But, if mlx5_lag_check_prereq() condition isn't met, for example when eswitch is in legacy mode, the fib event is skipped and mfi pointer becomes stale.

Fix by resetting mfi pointer to NULL every time mlx5_lag_mp_init() is called.

Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Dima Chumak dchumak@nvidia.com Reviewed-by: Roi Dayan roid@nvidia.com Signed-off-by: Saeed Mahameed saeedm@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c @@ -307,6 +307,11 @@ int mlx5_lag_mp_init(struct mlx5_lag *ld struct lag_mp *mp = &ldev->lag_mp; int err;

+ /* always clear mfi, as it might become stale when a route delete event + * has been missed + */ + mp->mfi = NULL; + if (mp->fib_nb.notifier_call) return 0;

@@ -328,4 +333,5 @@ void mlx5_lag_mp_cleanup(struct mlx5_lag

unregister_fib_notifier(&mp->fib_nb); mp->fib_nb.notifier_call = NULL; + mp->mfi = NULL; }

From: Vladyslav Tarasiuk vladyslavt@nvidia.com

commit db825feefc6868896fed5e361787ba3bee2fd906 upstream.

Fix SFP and QSFP* EEPROM queries by setting i2c_address, offset and page number correctly. For SFP set the following params: - I2C address for offsets 0-255 is 0x50. For 256-511 - 0x51. - Page number is zero. - Offset is 0-255.

At the same time, QSFP* parameters are different: - I2C address is always 0x50. - Page number is not limited to zero. - Offset is 0-255 for page zero and 128-255 for others.

To set parameters accordingly to cable used, implement function to query module ID and implement respective helper functions to set parameters correctly.

Fixes: 135dd9594f12 ("net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query") Signed-off-by: Vladyslav Tarasiuk vladyslavt@nvidia.com Signed-off-by: Tariq Toukan tariqt@nvidia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4 drivers/net/ethernet/mellanox/mlx4/port.c | 107 +++++++++++++++++++++++- 2 files changed, 104 insertions(+), 7 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -2011,8 +2011,6 @@ static int mlx4_en_set_tunable(struct ne return ret; }

-#define MLX4_EEPROM_PAGE_LEN 256 - static int mlx4_en_get_module_info(struct net_device *dev, struct ethtool_modinfo *modinfo) { @@ -2047,7 +2045,7 @@ static int mlx4_en_get_module_info(struc break; case MLX4_MODULE_ID_SFP: modinfo->type = ETH_MODULE_SFF_8472; - modinfo->eeprom_len = MLX4_EEPROM_PAGE_LEN; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; break; default: return -EINVAL; --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -1973,6 +1973,7 @@ EXPORT_SYMBOL(mlx4_get_roce_gid_from_sla #define I2C_ADDR_LOW 0x50 #define I2C_ADDR_HIGH 0x51 #define I2C_PAGE_SIZE 256 +#define I2C_HIGH_PAGE_SIZE 128

/* Module Info Data */ struct mlx4_cable_info { @@ -2026,6 +2027,88 @@ static inline const char *cable_info_mad return "Unknown Error"; }

+static int mlx4_get_module_id(struct mlx4_dev *dev, u8 port, u8 *module_id) +{ + struct mlx4_cmd_mailbox *inbox, *outbox; + struct mlx4_mad_ifc *inmad, *outmad; + struct mlx4_cable_info *cable_info; + int ret; + + inbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(inbox)) + return PTR_ERR(inbox); + + outbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(outbox)) { + mlx4_free_cmd_mailbox(dev, inbox); + return PTR_ERR(outbox); + } + + inmad = (struct mlx4_mad_ifc *)(inbox->buf); + outmad = (struct mlx4_mad_ifc *)(outbox->buf); + + inmad->method = 0x1; /* Get */ + inmad->class_version = 0x1; + inmad->mgmt_class = 0x1; + inmad->base_version = 0x1; + inmad->attr_id = cpu_to_be16(0xFF60); /* Module Info */ + + cable_info = (struct mlx4_cable_info *)inmad->data; + cable_info->dev_mem_address = 0; + cable_info->page_num = 0; + cable_info->i2c_addr = I2C_ADDR_LOW; + cable_info->size = cpu_to_be16(1); + + ret = mlx4_cmd_box(dev, inbox->dma, outbox->dma, port, 3, + MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C, + MLX4_CMD_NATIVE); + if (ret) + goto out; + + if (be16_to_cpu(outmad->status)) { + /* Mad returned with bad status */ + ret = be16_to_cpu(outmad->status); + mlx4_warn(dev, + "MLX4_CMD_MAD_IFC Get Module ID attr(%x) port(%d) i2c_addr(%x) offset(%d) size(%d): Response Mad Status(%x) - %s\n", + 0xFF60, port, I2C_ADDR_LOW, 0, 1, ret, + cable_info_mad_err_str(ret)); + ret = -ret; + goto out; + } + cable_info = (struct mlx4_cable_info *)outmad->data; + *module_id = cable_info->data[0]; +out: + mlx4_free_cmd_mailbox(dev, inbox); + mlx4_free_cmd_mailbox(dev, outbox); + return ret; +} + +static void mlx4_sfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset) +{ + *i2c_addr = I2C_ADDR_LOW; + *page_num = 0; + + if (*offset < I2C_PAGE_SIZE) + return; + + *i2c_addr = I2C_ADDR_HIGH; + *offset -= I2C_PAGE_SIZE; +} + +static void mlx4_qsfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset) +{ + /* Offsets 0-255 belong to page 0. + * Offsets 256-639 belong to pages 01, 02, 03. + * For example, offset 400 is page 02: 1 + (400 - 256) / 128 = 2 + */ + if (*offset < I2C_PAGE_SIZE) + *page_num = 0; + else + *page_num = 1 + (*offset - I2C_PAGE_SIZE) / I2C_HIGH_PAGE_SIZE; + *i2c_addr = I2C_ADDR_LOW; + *offset -= *page_num * I2C_HIGH_PAGE_SIZE; +} + /** * mlx4_get_module_info - Read cable module eeprom data * @dev: mlx4_dev. @@ -2045,12 +2128,30 @@ int mlx4_get_module_info(struct mlx4_dev struct mlx4_cmd_mailbox *inbox, *outbox; struct mlx4_mad_ifc *inmad, *outmad; struct mlx4_cable_info *cable_info; - u16 i2c_addr; + u8 module_id, i2c_addr, page_num; int ret;

if (size > MODULE_INFO_MAX_READ) size = MODULE_INFO_MAX_READ;

+ ret = mlx4_get_module_id(dev, port, &module_id); + if (ret) + return ret; + + switch (module_id) { + case MLX4_MODULE_ID_SFP: + mlx4_sfp_eeprom_params_set(&i2c_addr, &page_num, &offset); + break; + case MLX4_MODULE_ID_QSFP: + case MLX4_MODULE_ID_QSFP_PLUS: + case MLX4_MODULE_ID_QSFP28: + mlx4_qsfp_eeprom_params_set(&i2c_addr, &page_num, &offset); + break; + default: + mlx4_err(dev, "Module ID not recognized: %#x\n", module_id); + return -EINVAL; + } + inbox = mlx4_alloc_cmd_mailbox(dev); if (IS_ERR(inbox)) return PTR_ERR(inbox); @@ -2076,11 +2177,9 @@ int mlx4_get_module_info(struct mlx4_dev */ size -= offset + size - I2C_PAGE_SIZE;

- i2c_addr = I2C_ADDR_LOW; - cable_info = (struct mlx4_cable_info *)inmad->data; cable_info->dev_mem_address = cpu_to_be16(offset); - cable_info->page_num = 0; + cable_info->page_num = page_num; cable_info->i2c_addr = i2c_addr; cable_info->size = cpu_to_be16(size);

From: Xin Long lucien.xin@gmail.com

commit 04c26faa51d1e2fe71cf13c45791f5174c37f986 upstream.

On some host, a crash could be triggered simply by repeating these commands several times:

# modprobe tipc # tipc bearer enable media udp name UDP1 localip 127.0.0.1 # rmmod tipc

[] BUG: unable to handle kernel paging request at ffffffffc096bb00 [] Workqueue: events 0xffffffffc096bb00 [] Call Trace: [] ? process_one_work+0x1a7/0x360 [] ? worker_thread+0x30/0x390 [] ? create_worker+0x1a0/0x1a0 [] ? kthread+0x116/0x130 [] ? kthread_flush_work_fn+0x10/0x10 [] ? ret_from_fork+0x35/0x40

When removing the TIPC module, the UDP tunnel sock will be delayed to release in a work queue as sock_release() can't be done in rtnl_lock(). If the work queue is schedule to run after the TIPC module is removed, kernel will crash as the work queue function cleanup_beareri() code no longer exists when trying to invoke it.

To fix it, this patch introduce a member wq_count in tipc_net to track the numbers of work queues in schedule, and wait and exit until all work queues are done in tipc_exit_net().

Fixes: d0f91938bede ("tipc: add ip/udp media type") Reported-by: Shuang Li shuali@redhat.com Signed-off-by: Xin Long lucien.xin@gmail.com Acked-by: Jon Maloy jmaloy@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/tipc/core.c | 3 +++ net/tipc/core.h | 2 ++ net/tipc/udp_media.c | 2 ++ 3 files changed, 7 insertions(+)

--- a/net/tipc/core.c +++ b/net/tipc/core.c @@ -107,6 +107,9 @@ static void __net_exit tipc_exit_net(str tipc_bcast_stop(net); tipc_nametbl_stop(net); tipc_sk_rht_destroy(net); + + while (atomic_read(&tn->wq_count)) + cond_resched(); }

static struct pernet_operations tipc_net_ops = { --- a/net/tipc/core.h +++ b/net/tipc/core.h @@ -143,6 +143,8 @@ struct tipc_net {

/* Work item for net finalize */ struct tipc_net_work final_work; + /* The numbers of work queues in schedule */ + atomic_t wq_count; };

static inline struct tipc_net *tipc_net(struct net *net) --- a/net/tipc/udp_media.c +++ b/net/tipc/udp_media.c @@ -802,6 +802,7 @@ static void cleanup_bearer(struct work_s kfree_rcu(rcast, rcu); }

+ atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count); dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->ubsock); synchronize_net(); @@ -822,6 +823,7 @@ static void tipc_udp_disable(struct tipc RCU_INIT_POINTER(ub->bearer, NULL);

/* sock_release need to be done outside of rtnl lock */ + atomic_inc(&tipc_net(sock_net(ub->ubsock->sk))->wq_count); INIT_WORK(&ub->work, cleanup_bearer); schedule_work(&ub->work); }

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

commit 680ec0549a055eb464dce6ffb4bfb736ef87236e upstream.

'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the error handling path of the probe function, as already done in the remove function

Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Reviewed-by: Vladimir Oltean olteanv@gmail.com Link: https://lore.kernel.org/r/d51caaac747277a1099ba8dea07acd85435b857e.162058747... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/spi/spi-fsl-dspi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1142,11 +1142,13 @@ poll_mode: ret = spi_register_controller(ctlr); if (ret != 0) { dev_err(&pdev->dev, "Problem registering DSPI ctlr\n"); - goto out_free_irq; + goto out_release_dma; }

return ret;

+out_release_dma: + dspi_release_dma(dspi); out_free_irq: if (dspi->irq) free_irq(dspi->irq, dspi);

From: Dan Carpenter dan.carpenter@oracle.com

commit a269333fa5c0c8e53c92b5a28a6076a28cde3e83 upstream.

If ds->ops->get_sset_count() fails then it "count" is a negative error code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative error code is type promoted to a very high value and the loop will corrupt memory until the system crashes.

Fix this by checking for error codes and changing the type of "i" to just int.

Fixes: badf3ada60ab ("net: dsa: Provide CPU port statistics to master netdev") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Andrew Lunn andrew@lunn.ch Reviewed-by: Florian Fainelli f.fainelli@gmail.com Reviewed-by: Vladimir Oltean olteanv@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/dsa/master.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/net/dsa/master.c +++ b/net/dsa/master.c @@ -147,8 +147,7 @@ static void dsa_master_get_strings(struc struct dsa_switch *ds = cpu_dp->ds; int port = cpu_dp->index; int len = ETH_GSTRING_LEN; - int mcount = 0, count; - unsigned int i; + int mcount = 0, count, i; uint8_t pfx[4]; uint8_t *ndata;

@@ -178,6 +177,8 @@ static void dsa_master_get_strings(struc */ ds->ops->get_strings(ds, port, stringset, ndata); count = ds->ops->get_sset_count(ds, port, stringset); + if (count < 0) + return; for (i = 0; i < count; i++) { memmove(ndata + (i * len + sizeof(pfx)), ndata + i * len, len - sizeof(pfx));

From: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com

commit 24990423267ec283b9d86f07f362b753eb9b0ed5 upstream.

Interrupt handler processes multiple message write requests one after another, till the driver message queue is drained. However if driver encounters a read message without preceding START, it stops the I2C transfer as it is an invalid condition for the controller. At least the comment describes a requirement "the controller forces us to send a new START when we change direction". This stop results in clearing the message queue (i2c->msg = NULL).

The code however immediately jumped back to label "retry_write" which dereferenced the "i2c->msg" making it a possible NULL pointer dereference.

The Coverity analysis: 1. Condition !is_msgend(i2c), taking false branch. if (!is_msgend(i2c)) {

2. Condition !is_lastmsg(i2c), taking true branch. } else if (!is_lastmsg(i2c)) {

3. Condition i2c->msg->flags & 1, taking true branch. if (i2c->msg->flags & I2C_M_RD) {

4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL. s3c24xx_i2c_stop(i2c, -EINVAL);

5. Jumping to label retry_write. goto retry_write;

6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg. if (!is_msgend(i2c)) {"

All previous calls to s3c24xx_i2c_stop() in this interrupt service routine are followed by jumping to end of function (acknowledging the interrupt and returning). This seems a reasonable choice also here since message buffer was entirely emptied.

Addresses-Coverity: Explicit null dereferenced Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-s3c2410.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -484,7 +484,10 @@ static int i2c_s3c_irq_nextbyte(struct s * forces us to send a new START * when we change direction */ + dev_dbg(i2c->dev, + "missing START before write->read\n"); s3c24xx_i2c_stop(i2c, -EINVAL); + break; }

goto retry_write;

From: Geert Uytterhoeven geert+renesas@glider.be

commit c4740e293c93c747e65d53d9aacc2ba8521d1489 upstream.

When switching the Gen3 SoCs to the new clock calculation formulas, the match entry for RZ/G2E added in commit 51243b73455f2d12 ("i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)") was forgotten.

Fixes: e8a27567509b2439 ("i2c: sh_mobile: use new clock calculation formulas for Gen3") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Fabrizio Castro fabrizio.castro.jz@renesas.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-sh_mobile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -813,7 +813,7 @@ static const struct sh_mobile_dt_config static const struct of_device_id sh_mobile_i2c_dt_ids[] = { { .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config }, { .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config }, - { .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config }, + { .compatible = "renesas,iic-r8a774c0", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config }, { .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config },

From: Kai-Heng Feng kai.heng.feng@canonical.com

[ Upstream commit 79d341e26ebcdbc622348aaaab6f8f89b6fdb25f ]

hp_accel can take almost two seconds to resume on some HP laptops.

The bottleneck is on evaluating _INI, which is only needed to run once.

Resolve the issue by only invoking _INI when it's necessary. Namely, on probe and on hibernation restore.

Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Acked-by: Éric Piel eric.piel@trempplin-utc.net Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.co... Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/lis3lv02d/lis3lv02d.h | 1 + drivers/platform/x86/hp_accel.c | 22 +++++++++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h index 1b0c99883c57..c008eecfdfe8 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d.h +++ b/drivers/misc/lis3lv02d/lis3lv02d.h @@ -271,6 +271,7 @@ struct lis3lv02d { int regs_size; u8 *reg_cache; bool regs_stored; + bool init_required; u8 odr_mask; /* ODR bit mask */ u8 whoami; /* indicates measurement precision */ s16 (*read_data) (struct lis3lv02d *lis3, int reg); diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index 799cbe2ffcf3..8c0867bda828 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -88,6 +88,9 @@ MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids); static int lis3lv02d_acpi_init(struct lis3lv02d *lis3) { struct acpi_device *dev = lis3->bus_priv; + if (!lis3->init_required) + return 0; + if (acpi_evaluate_object(dev->handle, METHOD_NAME__INI, NULL, NULL) != AE_OK) return -EINVAL; @@ -356,6 +359,7 @@ static int lis3lv02d_add(struct acpi_device *device) }

/* call the core layer do its init */ + lis3_dev.init_required = true; ret = lis3lv02d_init_device(&lis3_dev); if (ret) return ret; @@ -403,11 +407,27 @@ static int lis3lv02d_suspend(struct device *dev)

static int lis3lv02d_resume(struct device *dev) { + lis3_dev.init_required = false; + lis3lv02d_poweron(&lis3_dev); + return 0; +} + +static int lis3lv02d_restore(struct device *dev) +{ + lis3_dev.init_required = true; lis3lv02d_poweron(&lis3_dev); return 0; }

-static SIMPLE_DEV_PM_OPS(hp_accel_pm, lis3lv02d_suspend, lis3lv02d_resume); +static const struct dev_pm_ops hp_accel_pm = { + .suspend = lis3lv02d_suspend, + .resume = lis3lv02d_resume, + .freeze = lis3lv02d_suspend, + .thaw = lis3lv02d_resume, + .poweroff = lis3lv02d_suspend, + .restore = lis3lv02d_restore, +}; + #define HP_ACCEL_PM (&hp_accel_pm) #else #define HP_ACCEL_PM NULL

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit fd013265e5b5576a74a033920d6c571e08d7c423 ]

This reverts commit 5b711870bec4dc9a6d705d41e127e73944fa3650.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to do does nothing useful as a user can do nothing with this information and if an error did happen, the code would continue on as before. Because of this, just revert it.

Cc: Kangjie Lu kjlu@umn.edu Cc: Mauro Carvalho Chehab mchehab+samsung@kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-7-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/gspca/cpia1.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/media/usb/gspca/cpia1.c b/drivers/media/usb/gspca/cpia1.c index a4f7431486f3..d93d384286c1 100644 --- a/drivers/media/usb/gspca/cpia1.c +++ b/drivers/media/usb/gspca/cpia1.c @@ -1424,7 +1424,6 @@ static int sd_config(struct gspca_dev *gspca_dev, { struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; - int ret;

sd->mainsFreq = FREQ_DEF == V4L2_CID_POWER_LINE_FREQUENCY_60HZ; reset_camera_params(gspca_dev); @@ -1436,10 +1435,7 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = mode; cam->nmodes = ARRAY_SIZE(mode);

- ret = goto_low_power(gspca_dev); - if (ret) - gspca_err(gspca_dev, "Cannot go to low power mode: %d\n", - ret); + goto_low_power(gspca_dev); /* Check the firmware version. */ sd->params.version.firmwareVersion = 0; get_version_information(gspca_dev);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit b0a85abbe92e1a6f3e8580a4590fa7245de7090b ]

This reverts commit 51f689cc11333944c7a457f25ec75fcb41e99410.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

This change did not properly unwind from the error condition, so it was not correct.

Cc: Kangjie Lu kjlu@umn.edu Acked-by: Jiri Slaby jirislaby@kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-11-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/max310x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 8434bd5a8ec7..f60b7b86d099 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1527,10 +1527,10 @@ static int __init max310x_uart_init(void) return ret;

#ifdef CONFIG_SPI_MASTER - ret = spi_register_driver(&max310x_spi_driver); + spi_register_driver(&max310x_spi_driver); #endif

- return ret; + return 0; } module_init(max310x_uart_init);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 5f94eaa4ee23e80841fa359a372f84cfe25daee1 ]

This reverts commit 9f4d6358e11bbc7b839f9419636188e4151fb6e4.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original change does not change any behavior as the caller of this function onlyu checks for "== -1" as an error condition so this error is not handled properly. Remove this change and it will be fixed up properly in a later commit.

Cc: Kangjie Lu kjlu@umn.edu Cc: David S. Miller davem@davemloft.net Reviewed-by: Dominik Brodowski linux@dominikbrodowski.net Link: https://lore.kernel.org/r/20210503115736.2104747-15-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 5 ----- 1 file changed, 5 deletions(-)

diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c index 1eca0fdb9933..a69cd19a55ae 100644 --- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c +++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c @@ -547,11 +547,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) return -1;

base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); - if (!base) { - pcmcia_release_window(link, link->resource[2]); - return -ENOMEM; - } - pcmcia_map_mem_page(link, link->resource[2], 0);

/*

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 5369ead83f5aff223b6418c99cb1fe9a8f007363 ]

This reverts commit e183d4e414b64711baf7a04e214b61969ca08dfa.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original commit causes a memory leak and does not properly fix the issue it claims to fix. I will send a follow-on patch to resolve this properly.

Cc: Kangjie Lu kjlu@umn.edu Cc: Ursula Braun ubraun@linux.ibm.com Cc: David S. Miller davem@davemloft.net Link: https://lore.kernel.org/r/20210503115736.2104747-17-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/smc/smc_ism.c | 5 ----- 1 file changed, 5 deletions(-)

diff --git a/net/smc/smc_ism.c b/net/smc/smc_ism.c index e89e918b88e0..2fff79db1a59 100644 --- a/net/smc/smc_ism.c +++ b/net/smc/smc_ism.c @@ -289,11 +289,6 @@ struct smcd_dev *smcd_alloc_dev(struct device *parent, const char *name, INIT_LIST_HEAD(&smcd->vlan); smcd->event_wq = alloc_ordered_workqueue("ism_evt_wq-%s)", WQ_MEM_RECLAIM, name); - if (!smcd->event_wq) { - kfree(smcd->conn); - kfree(smcd); - return NULL; - } return smcd; } EXPORT_SYMBOL_GPL(smcd_alloc_dev);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 566f53238da74801b48e985788e5f7c9159e5940 ]

This reverts commit 13bd14a41ce3105d5b1f3cd8b4d1e249d17b6d9b.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

While this is technically correct, it is only fixing ONE of these errors in this function, so the patch is not fully correct. I'll leave this revert and provide a fix for this later that resolves this same "problem" everywhere in this function.

Cc: Kangjie Lu kjlu@umn.edu Link: https://lore.kernel.org/r/20210503115736.2104747-29-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/hpet.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index f69609b47fef..3e31740444f1 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -969,8 +969,6 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) if (ACPI_SUCCESS(status)) { hdp->hd_phys_address = addr.address.minimum; hdp->hd_address = ioremap(addr.address.minimum, addr.address.address_length); - if (!hdp->hd_address) - return AE_ERROR;

if (hpet_is_known(hdp)) { iounmap(hdp->hd_address);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 1dacca7fa1ebea47d38d20cd2df37094805d2649 ]

This reverts commit 0f25e000cb4398081748e54f62a902098aa79ec1.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original commit did nothing if there was an error, except to print out a message, which is pointless. So remove the commit as it gives a "false sense of doing something".

Cc: Kangjie Lu kjlu@umn.edu Reviewed-by: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/20210503115736.2104747-33-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/isa/gus/gus_main.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/sound/isa/gus/gus_main.c b/sound/isa/gus/gus_main.c index af6b4d89d695..39911a637e80 100644 --- a/sound/isa/gus/gus_main.c +++ b/sound/isa/gus/gus_main.c @@ -77,17 +77,8 @@ static const struct snd_kcontrol_new snd_gus_joystick_control = {

static void snd_gus_init_control(struct snd_gus_card *gus) { - int ret; - - if (!gus->ace_flag) { - ret = - snd_ctl_add(gus->card, - snd_ctl_new1(&snd_gus_joystick_control, - gus)); - if (ret) - snd_printk(KERN_ERR "gus: snd_ctl_add failed: %d\n", - ret); - } + if (!gus->ace_flag) + snd_ctl_add(gus->card, snd_ctl_new1(&snd_gus_joystick_control, gus)); }

/*

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 4667a6fc1777ce071504bab570d3599107f4790f ]

This reverts commit a2c6433ee5a35a8de6d563f6512a26f87835ea0f.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original patch was incorrect, and would leak memory if the error path the patch added was hit.

Cc: Aditya Pakki pakki001@umn.edu Reviewed-by: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/20210503115736.2104747-37-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/usx2y/usb_stream.c | 5 ----- 1 file changed, 5 deletions(-)

diff --git a/sound/usb/usx2y/usb_stream.c b/sound/usb/usx2y/usb_stream.c index 091c071b270a..6bba17bf689a 100644 --- a/sound/usb/usx2y/usb_stream.c +++ b/sound/usb/usx2y/usb_stream.c @@ -91,12 +91,7 @@ static int init_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,

for (u = 0; u < USB_STREAM_NURBS; ++u) { sk->inurb[u] = usb_alloc_urb(sk->n_o_ps, GFP_KERNEL); - if (!sk->inurb[u]) - return -ENOMEM; - sk->outurb[u] = usb_alloc_urb(sk->n_o_ps, GFP_KERNEL); - if (!sk->outurb[u]) - return -ENOMEM; }

if (init_pipe_urbs(sk, use_packsize, sk->inurb, indata, dev, in_pipe) ||

From: Phillip Potter phil@philpotter.co.uk

[ Upstream commit c446f0d4702d316e1c6bf621f70e79678d28830a ]

Move hw->cfg.mode and hw->addr.mode assignments from hw->ci->cfg_mode and hw->ci->addr_mode respectively, to be before the subsequent checks for memory IO mode (and possible ioremap calls in this case).

Also introduce ioremap error checks at both locations. This allows resources to be properly freed on ioremap failure, as when the caller of setup_io then subsequently calls release_io via its error path, release_io can now correctly determine the mode as it has been set before the ioremap call.

Finally, refactor release_io function so that it will call release_mem_region in the memory IO case, regardless of whether or not hw->cfg.p/hw->addr.p are NULL. This means resources are then properly released on failure.

This properly implements the original reverted commit (d721fe99f6ad) from the University of Minnesota, whilst also implementing the ioremap check for the hw->ci->cfg_mode if block as well.

Cc: David S. Miller davem@davemloft.net Signed-off-by: Phillip Potter phil@philpotter.co.uk Link: https://lore.kernel.org/r/20210503115736.2104747-42-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/mISDNinfineon.c | 24 ++++++++++++++------- 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c index d62006bab9c6..3cf0c6f5a1dc 100644 --- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c +++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c @@ -630,17 +630,19 @@ static void release_io(struct inf_hw *hw) { if (hw->cfg.mode) { - if (hw->cfg.p) { + if (hw->cfg.mode == AM_MEMIO) { release_mem_region(hw->cfg.start, hw->cfg.size); - iounmap(hw->cfg.p); + if (hw->cfg.p) + iounmap(hw->cfg.p); } else release_region(hw->cfg.start, hw->cfg.size); hw->cfg.mode = AM_NONE; } if (hw->addr.mode) { - if (hw->addr.p) { + if (hw->addr.mode == AM_MEMIO) { release_mem_region(hw->addr.start, hw->addr.size); - iounmap(hw->addr.p); + if (hw->addr.p) + iounmap(hw->addr.p); } else release_region(hw->addr.start, hw->addr.size); hw->addr.mode = AM_NONE; @@ -670,9 +672,12 @@ setup_io(struct inf_hw *hw) (ulong)hw->cfg.start, (ulong)hw->cfg.size); return err; } - if (hw->ci->cfg_mode == AM_MEMIO) - hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size); hw->cfg.mode = hw->ci->cfg_mode; + if (hw->ci->cfg_mode == AM_MEMIO) { + hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size); + if (!hw->cfg.p) + return -ENOMEM; + } if (debug & DEBUG_HW) pr_notice("%s: IO cfg %lx (%lu bytes) mode%d\n", hw->name, (ulong)hw->cfg.start, @@ -697,9 +702,12 @@ setup_io(struct inf_hw *hw) (ulong)hw->addr.start, (ulong)hw->addr.size); return err; } - if (hw->ci->addr_mode == AM_MEMIO) - hw->addr.p = ioremap(hw->addr.start, hw->addr.size); hw->addr.mode = hw->ci->addr_mode; + if (hw->ci->addr_mode == AM_MEMIO) { + hw->addr.p = ioremap(hw->addr.start, hw->addr.size); + if (!hw->addr.p) + return -ENOMEM; + } if (debug & DEBUG_HW) pr_notice("%s: IO addr %lx (%lu bytes) mode%d\n", hw->name, (ulong)hw->addr.start,

From: Anirudh Rayabharam mail@anirudhrb.com

[ Upstream commit 54433367840b46a1555c8ed36c4c0cfc5dbf1358 ]

Propagate error code from failure of ath6kl_wmi_cmd_send() to the caller.

Signed-off-by: Anirudh Rayabharam mail@anirudhrb.com Cc: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210503115736.2104747-44-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath6kl/debug.c | 5 ++++- drivers/net/wireless/ath/ath6kl/wmi.c | 4 +--- 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c index 54337d60f288..085a134069f7 100644 --- a/drivers/net/wireless/ath/ath6kl/debug.c +++ b/drivers/net/wireless/ath/ath6kl/debug.c @@ -1027,14 +1027,17 @@ static ssize_t ath6kl_lrssi_roam_write(struct file *file, { struct ath6kl *ar = file->private_data; unsigned long lrssi_roam_threshold; + int ret;

if (kstrtoul_from_user(user_buf, count, 0, &lrssi_roam_threshold)) return -EINVAL;

ar->lrssi_roam_threshold = lrssi_roam_threshold;

- ath6kl_wmi_set_roam_lrssi_cmd(ar->wmi, ar->lrssi_roam_threshold); + ret = ath6kl_wmi_set_roam_lrssi_cmd(ar->wmi, ar->lrssi_roam_threshold);

+ if (ret) + return ret; return count; }

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index d27b4088b874..c610fe21c85c 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -776,10 +776,8 @@ int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi) cmd->info.params.roam_rssi_floor = DEF_LRSSI_ROAM_FLOOR; cmd->roam_ctrl = WMI_SET_LRSSI_SCAN_PARAMS;

- ath6kl_wmi_cmd_send(wmi, 0, skb, WMI_SET_ROAM_CTRL_CMDID, + return ath6kl_wmi_cmd_send(wmi, 0, skb, WMI_SET_ROAM_CTRL_CMDID, NO_SYNC_WMIFLAG); - - return 0; }

int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid)

From: Phillip Potter phil@philpotter.co.uk

[ Upstream commit 5265db2ccc735e2783b790d6c19fb5cee8c025ed ]

Modify return type of hfcusb_ph_info to int, so that we can pass error value up the call stack when allocation of ph_info fails. Also change three of four call sites to actually account for the memory failure. The fourth, in ph_state_nt, is infeasible to change as it is in turn called by ph_state which is used as a function pointer argument to mISDN_initdchannel, which would necessitate changing its signature and updating all the places where it is used (too many).

Fixes original flawed commit (38d22659803a) from the University of Minnesota.

Cc: David S. Miller davem@davemloft.net Signed-off-by: Phillip Potter phil@philpotter.co.uk Link: https://lore.kernel.org/r/20210503115736.2104747-48-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/hfcsusb.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 7a051435c406..1f89378b5623 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -46,7 +46,7 @@ static void hfcsusb_start_endpoint(struct hfcsusb *hw, int channel); static void hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel); static int hfcsusb_setup_bch(struct bchannel *bch, int protocol); static void deactivate_bchannel(struct bchannel *bch); -static void hfcsusb_ph_info(struct hfcsusb *hw); +static int hfcsusb_ph_info(struct hfcsusb *hw);

/* start next background transfer for control channel */ static void @@ -241,7 +241,7 @@ hfcusb_l2l1B(struct mISDNchannel *ch, struct sk_buff *skb) * send full D/B channel status information * as MPH_INFORMATION_IND */ -static void +static int hfcsusb_ph_info(struct hfcsusb *hw) { struct ph_info *phi; @@ -249,6 +249,9 @@ hfcsusb_ph_info(struct hfcsusb *hw) int i;

phi = kzalloc(struct_size(phi, bch, dch->dev.nrbchan), GFP_ATOMIC); + if (!phi) + return -ENOMEM; + phi->dch.ch.protocol = hw->protocol; phi->dch.ch.Flags = dch->Flags; phi->dch.state = dch->state; @@ -261,6 +264,8 @@ hfcsusb_ph_info(struct hfcsusb *hw) sizeof(struct ph_info_dch) + dch->dev.nrbchan * sizeof(struct ph_info_ch), phi, GFP_ATOMIC); kfree(phi); + + return 0; }

/* @@ -345,8 +350,7 @@ hfcusb_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb) ret = l1_event(dch->l1, hh->prim); break; case MPH_INFORMATION_REQ: - hfcsusb_ph_info(hw); - ret = 0; + ret = hfcsusb_ph_info(hw); break; }

@@ -401,8 +405,7 @@ hfc_l1callback(struct dchannel *dch, u_int cmd) hw->name, __func__, cmd); return -1; } - hfcsusb_ph_info(hw); - return 0; + return hfcsusb_ph_info(hw); }

static int @@ -744,8 +747,7 @@ hfcsusb_setup_bch(struct bchannel *bch, int protocol) handle_led(hw, (bch->nr == 1) ? LED_B1_OFF : LED_B2_OFF); } - hfcsusb_ph_info(hw); - return 0; + return hfcsusb_ph_info(hw); }

static void

From: Phillip Potter phil@philpotter.co.uk

[ Upstream commit 4df2a8b0ad634d98a67e540a4e18a60f943e7d9f ]

Place a comment in hidma_mgmt_init explaining why success must currently be assumed, due to the cleanup issue that would need to be considered were this module ever to be unloadable or were this platform_driver_register call ever to fail.

Acked-By: Vinod Koul vkoul@kernel.org Acked-By: Sinan Kaya okaya@kernel.org Signed-off-by: Phillip Potter phil@philpotter.co.uk Link: https://lore.kernel.org/r/20210503115736.2104747-52-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/qcom/hidma_mgmt.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)

diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c index fe87b01f7a4e..62026607f3f8 100644 --- a/drivers/dma/qcom/hidma_mgmt.c +++ b/drivers/dma/qcom/hidma_mgmt.c @@ -418,6 +418,20 @@ static int __init hidma_mgmt_init(void) hidma_mgmt_of_populate_channels(child); } #endif + /* + * We do not check for return value here, as it is assumed that + * platform_driver_register must not fail. The reason for this is that + * the (potential) hidma_mgmt_of_populate_channels calls above are not + * cleaned up if it does fail, and to do this work is quite + * complicated. In particular, various calls of of_address_to_resource, + * of_irq_to_resource, platform_device_register_full, of_dma_configure, + * and of_msi_configure which then call other functions and so on, must + * be cleaned up - this is not a trivial exercise. + * + * Currently, this module is not intended to be unloaded, and there is + * no module_exit function defined which does the needed cleanup. For + * this reason, we have to assume success here. + */ platform_driver_register(&hidma_mgmt_driver);

return 0;

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 7e79b38fe9a403b065ac5915465f620a8fb3de84 ]

The libertas driver was trying to register sysfs groups "by hand" which causes them to be created _after_ the device is initialized and announced to userspace, which causes races and can prevent userspace tools from seeing the sysfs files correctly.

Fix this up by using the built-in sysfs_groups pointers in struct net_device which were created for this very reason, fixing the race condition, and properly allowing for any error that might have occured to be handled properly.

Cc: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210503115736.2104747-54-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/marvell/libertas/mesh.c | 28 +++----------------- 1 file changed, 4 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/marvell/libertas/mesh.c b/drivers/net/wireless/marvell/libertas/mesh.c index a21c86d446fa..050fd403110e 100644 --- a/drivers/net/wireless/marvell/libertas/mesh.c +++ b/drivers/net/wireless/marvell/libertas/mesh.c @@ -801,19 +801,6 @@ static const struct attribute_group mesh_ie_group = { .attrs = mesh_ie_attrs, };

-static void lbs_persist_config_init(struct net_device *dev) -{ - int ret; - ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group); - ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group); -} - -static void lbs_persist_config_remove(struct net_device *dev) -{ - sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group); - sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group); -} -

/*************************************************************************** * Initializing and starting, stopping mesh @@ -1014,6 +1001,10 @@ static int lbs_add_mesh(struct lbs_private *priv) SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);

mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST; + mesh_dev->sysfs_groups[0] = &lbs_mesh_attr_group; + mesh_dev->sysfs_groups[1] = &boot_opts_group; + mesh_dev->sysfs_groups[2] = &mesh_ie_group; + /* Register virtual mesh interface */ ret = register_netdev(mesh_dev); if (ret) { @@ -1021,19 +1012,10 @@ static int lbs_add_mesh(struct lbs_private *priv) goto err_free_netdev; }

- ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group); - if (ret) - goto err_unregister; - - lbs_persist_config_init(mesh_dev); - /* Everything successful */ ret = 0; goto done;

-err_unregister: - unregister_netdev(mesh_dev); - err_free_netdev: free_netdev(mesh_dev);

@@ -1054,8 +1036,6 @@ void lbs_remove_mesh(struct lbs_private *priv)

netif_stop_queue(mesh_dev); netif_carrier_off(mesh_dev); - sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group); - lbs_persist_config_remove(mesh_dev); unregister_netdev(mesh_dev); priv->mesh_dev = NULL; kfree(mesh_dev->ieee80211_ptr);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 2da441a6491d93eff8ffff523837fd621dc80389 ]

cs43130_probe() does not do any valid error checking of things it initializes, OR what it does, it does not unwind properly if there are errors.

Fix this up by moving the sysfs files to an attribute group so the driver core will correctly add/remove them all at once and handle errors with them, and correctly check for creating a new workqueue and unwinding if that fails.

Cc: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-58-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs43130.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index bb46e993c353..8f70dee95878 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -1735,6 +1735,14 @@ static DEVICE_ATTR(hpload_dc_r, 0444, cs43130_show_dc_r, NULL); static DEVICE_ATTR(hpload_ac_l, 0444, cs43130_show_ac_l, NULL); static DEVICE_ATTR(hpload_ac_r, 0444, cs43130_show_ac_r, NULL);

+static struct attribute *hpload_attrs[] = { + &dev_attr_hpload_dc_l.attr, + &dev_attr_hpload_dc_r.attr, + &dev_attr_hpload_ac_l.attr, + &dev_attr_hpload_ac_r.attr, +}; +ATTRIBUTE_GROUPS(hpload); + static struct reg_sequence hp_en_cal_seq[] = { {CS43130_INT_MASK_4, CS43130_INT_MASK_ALL}, {CS43130_HP_MEAS_LOAD_1, 0}, @@ -2302,23 +2310,15 @@ static int cs43130_probe(struct snd_soc_component *component)

cs43130->hpload_done = false; if (cs43130->dc_meas) { - ret = device_create_file(component->dev, &dev_attr_hpload_dc_l); - if (ret < 0) - return ret; - - ret = device_create_file(component->dev, &dev_attr_hpload_dc_r); - if (ret < 0) - return ret; - - ret = device_create_file(component->dev, &dev_attr_hpload_ac_l); - if (ret < 0) - return ret; - - ret = device_create_file(component->dev, &dev_attr_hpload_ac_r); - if (ret < 0) + ret = sysfs_create_groups(&component->dev->kobj, hpload_groups); + if (ret) return ret;

cs43130->wq = create_singlethread_workqueue("cs43130_hp"); + if (!cs43130->wq) { + sysfs_remove_groups(&component->dev->kobj, hpload_groups); + return -ENOMEM; + } INIT_WORK(&cs43130->work, cs43130_imp_meas); }

From: Alaa Emad alaaemadhossney.ae@gmail.com

[ Upstream commit c6d822c56e7fd29e6fa1b1bb91b98f6a1e942b3c ]

The function sp8870_readreg returns a negative value when i2c_transfer fails so properly check for this and return the error if it happens.

Cc: Sean Young sean@mess.org Cc: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Alaa Emad alaaemadhossney.ae@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-60-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/dvb-frontends/sp8870.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c index ee893a2f2261..9767159aeb9b 100644 --- a/drivers/media/dvb-frontends/sp8870.c +++ b/drivers/media/dvb-frontends/sp8870.c @@ -280,7 +280,9 @@ static int sp8870_set_frontend_parameters(struct dvb_frontend *fe) sp8870_writereg(state, 0xc05, reg0xc05);

// read status reg in order to clear pending irqs - sp8870_readreg(state, 0x200); + err = sp8870_readreg(state, 0x200); + if (err < 0) + return err;

// system controller start sp8870_microcontroller_start(state);

From: Alaa Emad alaaemadhossney.ae@gmail.com

[ Upstream commit e932f5b458eee63d013578ea128b9ff8ef5f5496 ]

If m5602_write_bridge times out, it will return a negative error value. So properly check for this and handle the error correctly instead of just ignoring it.

Cc: Mauro Carvalho Chehab mchehab+samsung@kernel.org Signed-off-by: Alaa Emad alaaemadhossney.ae@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-62-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/gspca/m5602/m5602_mt9m111.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c index 50481dc928d0..bf1af6ed9131 100644 --- a/drivers/media/usb/gspca/m5602/m5602_mt9m111.c +++ b/drivers/media/usb/gspca/m5602/m5602_mt9m111.c @@ -195,7 +195,7 @@ static const struct v4l2_ctrl_config mt9m111_greenbal_cfg = { int mt9m111_probe(struct sd *sd) { u8 data[2] = {0x00, 0x00}; - int i; + int i, err; struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;

if (force_sensor) { @@ -213,15 +213,17 @@ int mt9m111_probe(struct sd *sd) /* Do the preinit */ for (i = 0; i < ARRAY_SIZE(preinit_mt9m111); i++) { if (preinit_mt9m111[i][0] == BRIDGE) { - m5602_write_bridge(sd, - preinit_mt9m111[i][1], - preinit_mt9m111[i][2]); + err = m5602_write_bridge(sd, + preinit_mt9m111[i][1], + preinit_mt9m111[i][2]); } else { data[0] = preinit_mt9m111[i][2]; data[1] = preinit_mt9m111[i][3]; - m5602_write_sensor(sd, - preinit_mt9m111[i][1], data, 2); + err = m5602_write_sensor(sd, + preinit_mt9m111[i][1], data, 2); } + if (err < 0) + return err; }

if (m5602_read_sensor(sd, MT9M111_SC_CHIPVER, data, 2))

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit dacb408ca6f0e34df22b40d8dd5fae7f8e777d84 ]

If m5602_write_sensor() or m5602_write_bridge() fail, do not continue to initialize the device but return the error to the calling funtion.

Cc: Mauro Carvalho Chehab mchehab+samsung@kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-64-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/gspca/m5602/m5602_po1030.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c index 7bdbb8065146..8fd99ceee4b6 100644 --- a/drivers/media/usb/gspca/m5602/m5602_po1030.c +++ b/drivers/media/usb/gspca/m5602/m5602_po1030.c @@ -155,6 +155,7 @@ static const struct v4l2_ctrl_config po1030_greenbal_cfg = { int po1030_probe(struct sd *sd) { u8 dev_id_h = 0, i; + int err; struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;

if (force_sensor) { @@ -173,10 +174,13 @@ int po1030_probe(struct sd *sd) for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) { u8 data = preinit_po1030[i][2]; if (preinit_po1030[i][0] == SENSOR) - m5602_write_sensor(sd, - preinit_po1030[i][1], &data, 1); + err = m5602_write_sensor(sd, preinit_po1030[i][1], + &data, 1); else - m5602_write_bridge(sd, preinit_po1030[i][1], data); + err = m5602_write_bridge(sd, preinit_po1030[i][1], + data); + if (err < 0) + return err; }

if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))

From: Tom Seewald tseewald@gmail.com

[ Upstream commit dbc97bfd3918ed9268bfc174cae8a7d6b3d51aad ]

The functions send_rx_ctrl_cmd() in both liquidio/lio_main.c and liquidio/lio_vf_main.c do not check if the call to octeon_alloc_soft_command() fails and returns a null pointer. Both functions also return void so errors are not propagated back to the caller.

Fix these issues by updating both instances of send_rx_ctrl_cmd() to return an integer rather than void, and have them return -ENOMEM if an allocation failure occurs. Also update all callers of send_rx_ctrl_cmd() so that they now check the return value.

Cc: David S. Miller davem@davemloft.net Signed-off-by: Tom Seewald tseewald@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-66-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/cavium/liquidio/lio_main.c | 28 +++++++++++++------ .../ethernet/cavium/liquidio/lio_vf_main.c | 27 +++++++++++++----- 2 files changed, 40 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c index f2d486583e2f..d0c77ff9dbb1 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c @@ -1179,7 +1179,7 @@ static void octeon_destroy_resources(struct octeon_device *oct) * @param lio per-network private data * @param start_stop whether to start or stop */ -static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) +static int send_rx_ctrl_cmd(struct lio *lio, int start_stop) { struct octeon_soft_command *sc; union octnet_cmd *ncmd; @@ -1187,11 +1187,16 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) int retval;

if (oct->props[lio->ifidx].rx_on == start_stop) - return; + return 0;

sc = (struct octeon_soft_command *) octeon_alloc_soft_command(oct, OCTNET_CMD_SIZE, 16, 0); + if (!sc) { + netif_info(lio, rx_err, lio->netdev, + "Failed to allocate octeon_soft_command struct\n"); + return -ENOMEM; + }

ncmd = (union octnet_cmd *)sc->virtdptr;

@@ -1213,18 +1218,19 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) if (retval == IQ_SEND_FAILED) { netif_info(lio, rx_err, lio->netdev, "Failed to send RX Control message\n"); octeon_free_soft_command(oct, sc); - return; } else { /* Sleep on a wait queue till the cond flag indicates that the * response arrived or timed-out. */ retval = wait_for_sc_completion_timeout(oct, sc, 0); if (retval) - return; + return retval;

oct->props[lio->ifidx].rx_on = start_stop; WRITE_ONCE(sc->caller_is_done, true); } + + return retval; }

/** @@ -1811,6 +1817,7 @@ static int liquidio_open(struct net_device *netdev) struct octeon_device_priv *oct_priv = (struct octeon_device_priv *)oct->priv; struct napi_struct *napi, *n; + int ret = 0;

if (oct->props[lio->ifidx].napi_enabled == 0) { tasklet_disable(&oct_priv->droq_tasklet); @@ -1846,7 +1853,9 @@ static int liquidio_open(struct net_device *netdev) netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n");

/* tell Octeon to start forwarding packets to host */ - send_rx_ctrl_cmd(lio, 1); + ret = send_rx_ctrl_cmd(lio, 1); + if (ret) + return ret;

/* start periodical statistics fetch */ INIT_DELAYED_WORK(&lio->stats_wk.work, lio_fetch_stats); @@ -1857,7 +1866,7 @@ static int liquidio_open(struct net_device *netdev) dev_info(&oct->pci_dev->dev, "%s interface is opened\n", netdev->name);

- return 0; + return ret; }

/** @@ -1871,6 +1880,7 @@ static int liquidio_stop(struct net_device *netdev) struct octeon_device_priv *oct_priv = (struct octeon_device_priv *)oct->priv; struct napi_struct *napi, *n; + int ret = 0;

ifstate_reset(lio, LIO_IFSTATE_RUNNING);

@@ -1887,7 +1897,9 @@ static int liquidio_stop(struct net_device *netdev) lio->link_changes++;

/* Tell Octeon that nic interface is down. */ - send_rx_ctrl_cmd(lio, 0); + ret = send_rx_ctrl_cmd(lio, 0); + if (ret) + return ret;

if (OCTEON_CN23XX_PF(oct)) { if (!oct->msix_on) @@ -1922,7 +1934,7 @@ static int liquidio_stop(struct net_device *netdev)

dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);

- return 0; + return ret; }

/** diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c index 370d76822ee0..929da9e9fe9a 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c @@ -598,7 +598,7 @@ static void octeon_destroy_resources(struct octeon_device *oct) * @param lio per-network private data * @param start_stop whether to start or stop */ -static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) +static int send_rx_ctrl_cmd(struct lio *lio, int start_stop) { struct octeon_device *oct = (struct octeon_device *)lio->oct_dev; struct octeon_soft_command *sc; @@ -606,11 +606,16 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) int retval;

if (oct->props[lio->ifidx].rx_on == start_stop) - return; + return 0;

sc = (struct octeon_soft_command *) octeon_alloc_soft_command(oct, OCTNET_CMD_SIZE, 16, 0); + if (!sc) { + netif_info(lio, rx_err, lio->netdev, + "Failed to allocate octeon_soft_command struct\n"); + return -ENOMEM; + }

ncmd = (union octnet_cmd *)sc->virtdptr;

@@ -638,11 +643,13 @@ static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) */ retval = wait_for_sc_completion_timeout(oct, sc, 0); if (retval) - return; + return retval;

oct->props[lio->ifidx].rx_on = start_stop; WRITE_ONCE(sc->caller_is_done, true); } + + return retval; }

/** @@ -909,6 +916,7 @@ static int liquidio_open(struct net_device *netdev) struct octeon_device_priv *oct_priv = (struct octeon_device_priv *)oct->priv; struct napi_struct *napi, *n; + int ret = 0;

if (!oct->props[lio->ifidx].napi_enabled) { tasklet_disable(&oct_priv->droq_tasklet); @@ -935,11 +943,13 @@ static int liquidio_open(struct net_device *netdev) (LIQUIDIO_NDEV_STATS_POLL_TIME_MS));

/* tell Octeon to start forwarding packets to host */ - send_rx_ctrl_cmd(lio, 1); + ret = send_rx_ctrl_cmd(lio, 1); + if (ret) + return ret;

dev_info(&oct->pci_dev->dev, "%s interface is opened\n", netdev->name);

- return 0; + return ret; }

/** @@ -953,9 +963,12 @@ static int liquidio_stop(struct net_device *netdev) struct octeon_device_priv *oct_priv = (struct octeon_device_priv *)oct->priv; struct napi_struct *napi, *n; + int ret = 0;

/* tell Octeon to stop forwarding packets to host */ - send_rx_ctrl_cmd(lio, 0); + ret = send_rx_ctrl_cmd(lio, 0); + if (ret) + return ret;

netif_info(lio, ifdown, lio->netdev, "Stopping interface!\n"); /* Inform that netif carrier is down */ @@ -989,7 +1002,7 @@ static int liquidio_stop(struct net_device *netdev)

dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);

- return 0; + return ret; }

/**

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 419b4a142a7ece36cebcd434f8ce2af59ef94b85 ]

The brcmfmac driver ignores any errors on initialization with the different busses by deferring the initialization to a workqueue and ignoring all possible errors that might happen. Fix up all of this by only allowing the module to load if all bus registering worked properly.

Cc: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 8 +--- .../broadcom/brcm80211/brcmfmac/bus.h | 19 ++++++++- .../broadcom/brcm80211/brcmfmac/core.c | 42 ++++++++----------- .../broadcom/brcm80211/brcmfmac/pcie.c | 9 +--- .../broadcom/brcm80211/brcmfmac/pcie.h | 5 --- .../broadcom/brcm80211/brcmfmac/usb.c | 4 +- 6 files changed, 41 insertions(+), 46 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c index fc12598b2dd3..c492d2d2db1d 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c @@ -1168,13 +1168,9 @@ static struct sdio_driver brcmf_sdmmc_driver = { }, };

-void brcmf_sdio_register(void) +int brcmf_sdio_register(void) { - int ret; - - ret = sdio_register_driver(&brcmf_sdmmc_driver); - if (ret) - brcmf_err("sdio_register_driver failed: %d\n", ret); + return sdio_register_driver(&brcmf_sdmmc_driver); }

void brcmf_sdio_exit(void) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h index 623c0168da79..8b27494a5d3d 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h @@ -274,11 +274,26 @@ void brcmf_bus_add_txhdrlen(struct device *dev, uint len);

#ifdef CONFIG_BRCMFMAC_SDIO void brcmf_sdio_exit(void); -void brcmf_sdio_register(void); +int brcmf_sdio_register(void); +#else +static inline void brcmf_sdio_exit(void) { } +static inline int brcmf_sdio_register(void) { return 0; } #endif + #ifdef CONFIG_BRCMFMAC_USB void brcmf_usb_exit(void); -void brcmf_usb_register(void); +int brcmf_usb_register(void); +#else +static inline void brcmf_usb_exit(void) { } +static inline int brcmf_usb_register(void) { return 0; } +#endif + +#ifdef CONFIG_BRCMFMAC_PCIE +void brcmf_pcie_exit(void); +int brcmf_pcie_register(void); +#else +static inline void brcmf_pcie_exit(void) { } +static inline int brcmf_pcie_register(void) { return 0; } #endif

#endif /* BRCMFMAC_BUS_H */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index e9bb8dbdc9aa..edb79e9665dc 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -1438,40 +1438,34 @@ void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state) } }

-static void brcmf_driver_register(struct work_struct *work) -{ -#ifdef CONFIG_BRCMFMAC_SDIO - brcmf_sdio_register(); -#endif -#ifdef CONFIG_BRCMFMAC_USB - brcmf_usb_register(); -#endif -#ifdef CONFIG_BRCMFMAC_PCIE - brcmf_pcie_register(); -#endif -} -static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register); - int __init brcmf_core_init(void) { - if (!schedule_work(&brcmf_driver_work)) - return -EBUSY; + int err; + + err = brcmf_sdio_register(); + if (err) + return err; + + err = brcmf_usb_register(); + if (err) + goto error_usb_register;

+ err = brcmf_pcie_register(); + if (err) + goto error_pcie_register; return 0; + +error_pcie_register: + brcmf_usb_exit(); +error_usb_register: + brcmf_sdio_exit(); + return err; }

void __exit brcmf_core_exit(void) { - cancel_work_sync(&brcmf_driver_work); - -#ifdef CONFIG_BRCMFMAC_SDIO brcmf_sdio_exit(); -#endif -#ifdef CONFIG_BRCMFMAC_USB brcmf_usb_exit(); -#endif -#ifdef CONFIG_BRCMFMAC_PCIE brcmf_pcie_exit(); -#endif }

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index cb68f54a9c56..bda042138e96 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -2137,15 +2137,10 @@ static struct pci_driver brcmf_pciedrvr = { };

-void brcmf_pcie_register(void) +int brcmf_pcie_register(void) { - int err; - brcmf_dbg(PCIE, "Enter\n"); - err = pci_register_driver(&brcmf_pciedrvr); - if (err) - brcmf_err(NULL, "PCIE driver registration failed, err=%d\n", - err); + return pci_register_driver(&brcmf_pciedrvr); }

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h index d026401d2001..8e6c227e8315 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.h @@ -11,9 +11,4 @@ struct brcmf_pciedev { struct brcmf_pciedev_info *devinfo; };

- -void brcmf_pcie_exit(void); -void brcmf_pcie_register(void); - - #endif /* BRCMFMAC_PCIE_H */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c index 6f41d28930e4..3b897f040371 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c @@ -1558,8 +1558,8 @@ void brcmf_usb_exit(void) usb_deregister(&brcmf_usbdrvr); }

-void brcmf_usb_register(void) +int brcmf_usb_register(void) { brcmf_dbg(USB, "Enter\n"); - usb_register(&brcmf_usbdrvr); + return usb_register(&brcmf_usbdrvr); }

From: Matt Wang wwentao@vmware.com

[ Upstream commit 56f396146af278135c0ff958c79b5ee1bd22453d ]

Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit") introduced a serious issue for 64-bit systems. With this commit, 64-bit kernel will enumerate 8*15 non-existing disks. This is caused by the broken CCB structure. The change from u32 data to void *data increased CCB length on 64-bit system, which introduced an extra 4 byte offset of the CDB. This leads to incorrect response to INQUIRY commands during enumeration.

Fix disk enumeration failure by reverting the portion of the commit above which switched the data pointer from u32 to void.

Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.com Acked-by: Khalid Aziz khalid@gonehiking.org Signed-off-by: Matt Wang wwentao@vmware.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/BusLogic.c | 6 +++--- drivers/scsi/BusLogic.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index c25e8a54e869..6e988233fb81 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -3077,11 +3077,11 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command, ccb->opcode = BLOGIC_INITIATOR_CCB_SG; ccb->datalen = count * sizeof(struct blogic_sg_seg); if (blogic_multimaster_type(adapter)) - ccb->data = (void *)((unsigned int) ccb->dma_handle + + ccb->data = (unsigned int) ccb->dma_handle + ((unsigned long) &ccb->sglist - - (unsigned long) ccb)); + (unsigned long) ccb); else - ccb->data = ccb->sglist; + ccb->data = virt_to_32bit_virt(ccb->sglist);

scsi_for_each_sg(command, sg, count, i) { ccb->sglist[i].segbytes = sg_dma_len(sg); diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h index 6182cc8a0344..e081ad47d1cf 100644 --- a/drivers/scsi/BusLogic.h +++ b/drivers/scsi/BusLogic.h @@ -814,7 +814,7 @@ struct blogic_ccb { unsigned char cdblen; /* Byte 2 */ unsigned char sense_datalen; /* Byte 3 */ u32 datalen; /* Bytes 4-7 */ - void *data; /* Bytes 8-11 */ + u32 data; /* Bytes 8-11 */ unsigned char:8; /* Byte 12 */ unsigned char:8; /* Byte 13 */ enum blogic_adapter_status adapter_status; /* Byte 14 */

From: Josef Bacik josef@toxicpanda.com

[ Upstream commit 91df99a6eb50d5a1bc70fff4a09a0b7ae6aab96d ]

While doing error injection testing I got the following panic

kernel BUG at fs/btrfs/tree-log.c:1862! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:link_to_fixup_dir+0xd5/0xe0 RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216 RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0 RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000 RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001 R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800 R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065 FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0 Call Trace: replay_one_buffer+0x409/0x470 ? btree_read_extent_buffer_pages+0xd0/0x110 walk_up_log_tree+0x157/0x1e0 walk_log_tree+0xa6/0x1d0 btrfs_recover_log_trees+0x1da/0x360 ? replay_one_extent+0x7b0/0x7b0 open_ctree+0x1486/0x1720 btrfs_mount_root.cold+0x12/0xea ? __kmalloc_track_caller+0x12f/0x240 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? vfs_parse_fs_string+0x4d/0x90 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 path_mount+0x433/0xa10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

We can get -EIO or any number of legitimate errors from btrfs_search_slot(), panicing here is not the appropriate response. The error path for this code handles errors properly, simply return the error.

Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/tree-log.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index de53e5166997..54647eb9c6ed 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1846,8 +1846,6 @@ static noinline int link_to_fixup_dir(struct btrfs_trans_handle *trans, ret = btrfs_update_inode(trans, root, inode); } else if (ret == -EEXIST) { ret = 0; - } else { - BUG(); /* Logic Error */ } iput(inode);

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit bc1eca606d8084465e6f89fd646cc71defbad490 ]

The intel_punit_ipc driver might be compiled as a module. When udev handles the event of the devices appearing the intel_punit_ipc module is missing.

Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.

Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.int... Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_punit_ipc.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c index fa97834fdb78..ccb44f2eb240 100644 --- a/drivers/platform/x86/intel_punit_ipc.c +++ b/drivers/platform/x86/intel_punit_ipc.c @@ -328,6 +328,7 @@ static const struct acpi_device_id punit_ipc_acpi_ids[] = { { "INT34D4", 0 }, { } }; +MODULE_DEVICE_TABLE(acpi, punit_ipc_acpi_ids);

static struct platform_driver intel_punit_ipc_driver = { .probe = intel_punit_ipc_probe,

From: Steve French stfrench@microsoft.com

[ Upstream commit c0d46717b95735b0eacfddbcca9df37a49de9c7a ]

See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to 0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting it incorrectly).

Signed-off-by: Steve French stfrench@microsoft.com Reported-by: Stefan Metzmacher metze@samba.org Reviewed-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/smb2pdu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index c02983ebd763..e068f82ffedd 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -3611,10 +3611,10 @@ smb2_new_read_req(void **buf, unsigned int *total_len, * Related requests use info from previous read request * in chain. */ - shdr->SessionId = 0xFFFFFFFF; + shdr->SessionId = 0xFFFFFFFFFFFFFFFF; shdr->TreeId = 0xFFFFFFFF; - req->PersistentFileId = 0xFFFFFFFF; - req->VolatileFileId = 0xFFFFFFFF; + req->PersistentFileId = 0xFFFFFFFFFFFFFFFF; + req->VolatileFileId = 0xFFFFFFFFFFFFFFFF; } } if (remaining_bytes > io_parms->length)

From: Jingwen Chen Jingwen.Chen2@amd.com

[ Upstream commit fa7e6abc75f3d491bc561734312d065dc9dc2a77 ]

[Why] the gem object rfb->base.obj[0] is get according to num_planes in amdgpufb_create, but is not put according to num_planes

[How] put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes

Signed-off-by: Jingwen Chen Jingwen.Chen2@amd.com Acked-by: Christian König christian.koenig@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c index fd94a17fb2c6..46522804c7d8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c @@ -289,10 +289,13 @@ out: static int amdgpu_fbdev_destroy(struct drm_device *dev, struct amdgpu_fbdev *rfbdev) { struct amdgpu_framebuffer *rfb = &rfbdev->rfb; + int i;

drm_fb_helper_unregister_fbi(&rfbdev->helper);

if (rfb->base.obj[0]) { + for (i = 0; i < rfb->base.format->num_planes; i++) + drm_gem_object_put(rfb->base.obj[0]); amdgpufb_destroy_pinned_object(rfb->base.obj[0]); rfb->base.obj[0] = NULL; drm_framebuffer_unregister_private(&rfb->base);

From: Lang Yu Lang.Yu@amd.com

[ Upstream commit 9c2876d56f1ce9b6b2072f1446fb1e8d1532cb3d ]

When amdgpu_ib_ring_tests failed, the reset logic called amdgpu_device_ip_suspend twice, then deadlock occurred. Deadlock log:

[ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110). [ 806.290952] [drm] free PSP TMR buffer

[ 806.319406] ============================================ [ 806.320315] WARNING: possible recursive locking detected [ 806.321225] 5.11.0-custom #1 Tainted: G W OEL [ 806.322135] -------------------------------------------- [ 806.323043] cat/2593 is trying to acquire lock: [ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.325668] but task is already holding lock: [ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.328430] other info that might help us debug this: [ 806.329539] Possible unsafe locking scenario:

[ 806.330549] CPU0 [ 806.330983] ---- [ 806.331416] lock(&adev->dm.dc_lock); [ 806.332086] lock(&adev->dm.dc_lock); [ 806.332738] *** DEADLOCK ***

[ 806.333747] May be due to missing lock nesting notation

[ 806.334899] 3 locks held by cat/2593: [ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110 [ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu] [ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.340869] stack backtrace: [ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1 [ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020 [ 806.344413] Call Trace: [ 806.344849] dump_stack+0x93/0xbd [ 806.345435] __lock_acquire.cold+0x18a/0x2cf [ 806.346179] lock_acquire+0xca/0x390 [ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.347813] __mutex_lock+0x9b/0x930 [ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu] [ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50 [ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.354064] mutex_lock_nested+0x1b/0x20 [ 806.354747] ? mutex_lock_nested+0x1b/0x20 [ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu] [ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu] [ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu] [ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu] [ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu]

Signed-off-by: Lang Yu Lang.Yu@amd.com Acked-by: Christian KÃnig christian.koenig@amd.com Reviewed-by: Andrey Grodzovsky andrey.grodzovsky@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 3b3fc9a426e9..765f9a6c4640 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -3704,7 +3704,6 @@ out: r = amdgpu_ib_ring_tests(tmp_adev); if (r) { dev_err(tmp_adev->dev, "ib ring test failed (%d).\n", r); - r = amdgpu_device_ip_suspend(tmp_adev); need_full_reset = true; r = -EAGAIN; goto end;

From: Richard Fitzgerald rf@opensource.cirrus.com

[ Upstream commit 0fad605fb0bdc00d8ad78696300ff2fbdee6e048 ]

cs42l42 does not support standard burst transfers so the use_single_read and use_single_write flags must be set in the regmap config.

Because of this bug, the patch:

commit 0a0eb567e1d4 ("ASoC: cs42l42: Minor error paths fixups")

broke cs42l42 probe() because without the use_single_* flags it causes regmap to issue a burst read.

However, the missing use_single_* could cause problems anyway because the regmap cache can attempt burst transfers if these flags are not set.

Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20210511132855.27159-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index dcd2acb2c3ce..5faf8877137a 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -398,6 +398,9 @@ static const struct regmap_config cs42l42_regmap = { .reg_defaults = cs42l42_reg_defaults, .num_reg_defaults = ARRAY_SIZE(cs42l42_reg_defaults), .cache_type = REGCACHE_RBTREE, + + .use_single_read = true, + .use_single_write = true, };

static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false);

From: Paolo Abeni pabeni@redhat.com

[ Upstream commit 098116e7e640ba677d9e345cbee83d253c13d556 ]

If the owing socket is shutting down - e.g. the sock reference count already dropped to 0 and only sk_wmem_alloc is keeping the sock alive, skb_orphan_partial() becomes a no-op.

When forwarding packets over veth with GRO enabled, the above causes refcount errors.

This change addresses the issue with a plain skb_orphan() call in the critical scenario.

Fixes: 9adc89af724f ("net: let skb_orphan_partial wake-up waiters.") Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/sock.h | 4 +++- net/core/sock.c | 8 ++++---- 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/include/net/sock.h b/include/net/sock.h index 4137fa178790..a0728f24ecc5 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -2150,13 +2150,15 @@ static inline void skb_set_owner_r(struct sk_buff *skb, struct sock *sk) sk_mem_charge(sk, skb->truesize); }

-static inline void skb_set_owner_sk_safe(struct sk_buff *skb, struct sock *sk) +static inline __must_check bool skb_set_owner_sk_safe(struct sk_buff *skb, struct sock *sk) { if (sk && refcount_inc_not_zero(&sk->sk_refcnt)) { skb_orphan(skb); skb->destructor = sock_efree; skb->sk = sk; + return true; } + return false; }

void sk_reset_timer(struct sock *sk, struct timer_list *timer, diff --git a/net/core/sock.c b/net/core/sock.c index 19c178aac0ae..68f84fac63e0 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -2026,10 +2026,10 @@ void skb_orphan_partial(struct sk_buff *skb) if (skb_is_tcp_pure_ack(skb)) return;

- if (can_skb_orphan_partial(skb)) - skb_set_owner_sk_safe(skb, skb->sk); - else - skb_orphan(skb); + if (can_skb_orphan_partial(skb) && skb_set_owner_sk_safe(skb, skb->sk)) + return; + + skb_orphan(skb); } EXPORT_SYMBOL(skb_orphan_partial);

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit a93a0a15876d2a077a3bc260b387d2457a051f24 ]

'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the probe function. So it must not be freed explicitly or there will be a double free.

Remove the incorrect 'mdiobus_free' in the remove function.

Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Reviewed-by: Russell King rmk+kernel@armlinux.org.uk Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/mdio-thunder.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/net/phy/mdio-thunder.c b/drivers/net/phy/mdio-thunder.c index b6128ae7f14f..1e2f57ed1ef7 100644 --- a/drivers/net/phy/mdio-thunder.c +++ b/drivers/net/phy/mdio-thunder.c @@ -126,7 +126,6 @@ static void thunder_mdiobus_pci_remove(struct pci_dev *pdev) continue;

mdiobus_unregister(bus->mii_bus); - mdiobus_free(bus->mii_bus); oct_mdio_writeq(0, bus->register_base + SMI_EN); } pci_set_drvdata(pdev, NULL);

From: Tao Liu thomas.liu@ucloud.cn

[ Upstream commit e4df1b0c24350a0f00229ff895a91f1072bd850d ]

We have observed meters working unexpected if traffic is 3+Gbit/s with multiple connections.

now_ms is not pretected by meter->lock, we may get a negative long_delta_ms when another cpu updated meter->used, then: delta_ms = (u32)long_delta_ms; which will be a large value.

band->bucket += delta_ms * band->rate; then we get a wrong band->bucket.

OpenVswitch userspace datapath has fixed the same issue[1] some time ago, and we port the implementation to kernel datapath.

[1] https://patchwork.ozlabs.org/project/openvswitch/patch/20191025114436.9746-1...

Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Tao Liu thomas.liu@ucloud.cn Suggested-by: Ilya Maximets i.maximets@ovn.org Reviewed-by: Ilya Maximets i.maximets@ovn.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/openvswitch/meter.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/net/openvswitch/meter.c b/net/openvswitch/meter.c index 541eea74ef7a..c37e09223cbb 100644 --- a/net/openvswitch/meter.c +++ b/net/openvswitch/meter.c @@ -460,6 +460,14 @@ bool ovs_meter_execute(struct datapath *dp, struct sk_buff *skb, spin_lock(&meter->lock);

long_delta_ms = (now_ms - meter->used); /* ms */ + if (long_delta_ms < 0) { + /* This condition means that we have several threads fighting + * for a meter lock, and the one who received the packets a + * bit later wins. Assuming that all racing threads received + * packets at the same time to avoid overflow. + */ + long_delta_ms = 0; + }

/* Make sure delta_ms will not be too large, so that bucket will not * wrap around below.

From: Yunsheng Lin linyunsheng@huawei.com

[ Upstream commit a90c57f2cedd52a511f739fb55e6244e22e1a2fb ]

Lockless qdisc has below concurrent problem: cpu0 cpu1 . . q->enqueue . . . qdisc_run_begin() . . . dequeue_skb() . . . sch_direct_xmit() . . . . q->enqueue . qdisc_run_begin() . return and do nothing . . qdisc_run_end() .

cpu1 enqueue a skb without calling __qdisc_run() because cpu0 has not released the lock yet and spin_trylock() return false for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb enqueued by cpu1 when calling dequeue_skb() because cpu1 may enqueue the skb after cpu0 calling dequeue_skb() and before cpu0 calling qdisc_run_end().

Lockless qdisc has below another concurrent problem when tx_action is involved:

cpu0(serving tx_action) cpu1 cpu2 . . . . q->enqueue . . qdisc_run_begin() . . dequeue_skb() . . . q->enqueue . . . . sch_direct_xmit() . . . qdisc_run_begin() . . return and do nothing . . . clear __QDISC_STATE_SCHED . . qdisc_run_begin() . . return and do nothing . . . . . . qdisc_run_end() .

This patch fixes the above data race by: 1. If the first spin_trylock() return false and STATE_MISSED is not set, set STATE_MISSED and retry another spin_trylock() in case other CPU may not see STATE_MISSED after it releases the lock. 2. reschedule if STATE_MISSED is set after the lock is released at the end of qdisc_run_end().

For tx_action case, STATE_MISSED is also set when cpu1 is at the end if qdisc_run_end(), so tx_action will be rescheduled again to dequeue the skb enqueued by cpu2.

Clear STATE_MISSED before retrying a dequeuing when dequeuing returns NULL in order to reduce the overhead of the second spin_trylock() and __netif_schedule() calling.

Also clear the STATE_MISSED before calling __netif_schedule() at the end of qdisc_run_end() to avoid doing another round of dequeuing in the pfifo_fast_dequeue().

The performance impact of this patch, tested using pktgen and dummy netdev with pfifo_fast qdisc attached:

threads without+this_patch with+this_patch delta 1 2.61Mpps 2.60Mpps -0.3% 2 3.97Mpps 3.82Mpps -3.7% 4 5.62Mpps 5.59Mpps -0.5% 8 2.78Mpps 2.77Mpps -0.3% 16 2.22Mpps 2.22Mpps -0.0%

Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking") Acked-by: Jakub Kicinski kuba@kernel.org Tested-by: Juergen Gross jgross@suse.com Signed-off-by: Yunsheng Lin linyunsheng@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/sch_generic.h | 35 ++++++++++++++++++++++++++++++++++- net/sched/sch_generic.c | 19 +++++++++++++++++++ 2 files changed, 53 insertions(+), 1 deletion(-)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index b2ceec7b280d..0852f3e51360 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -36,6 +36,7 @@ struct qdisc_rate_table { enum qdisc_state_t { __QDISC_STATE_SCHED, __QDISC_STATE_DEACTIVATED, + __QDISC_STATE_MISSED, };

struct qdisc_size_table { @@ -156,8 +157,33 @@ static inline bool qdisc_is_empty(const struct Qdisc *qdisc) static inline bool qdisc_run_begin(struct Qdisc *qdisc) { if (qdisc->flags & TCQ_F_NOLOCK) { + if (spin_trylock(&qdisc->seqlock)) + goto nolock_empty; + + /* If the MISSED flag is set, it means other thread has + * set the MISSED flag before second spin_trylock(), so + * we can return false here to avoid multi cpus doing + * the set_bit() and second spin_trylock() concurrently. + */ + if (test_bit(__QDISC_STATE_MISSED, &qdisc->state)) + return false; + + /* Set the MISSED flag before the second spin_trylock(), + * if the second spin_trylock() return false, it means + * other cpu holding the lock will do dequeuing for us + * or it will see the MISSED flag set after releasing + * lock and reschedule the net_tx_action() to do the + * dequeuing. + */ + set_bit(__QDISC_STATE_MISSED, &qdisc->state); + + /* Retry again in case other CPU may not see the new flag + * after it releases the lock at the end of qdisc_run_end(). + */ if (!spin_trylock(&qdisc->seqlock)) return false; + +nolock_empty: WRITE_ONCE(qdisc->empty, false); } else if (qdisc_is_running(qdisc)) { return false; @@ -173,8 +199,15 @@ static inline bool qdisc_run_begin(struct Qdisc *qdisc) static inline void qdisc_run_end(struct Qdisc *qdisc) { write_seqcount_end(&qdisc->running); - if (qdisc->flags & TCQ_F_NOLOCK) + if (qdisc->flags & TCQ_F_NOLOCK) { spin_unlock(&qdisc->seqlock); + + if (unlikely(test_bit(__QDISC_STATE_MISSED, + &qdisc->state))) { + clear_bit(__QDISC_STATE_MISSED, &qdisc->state); + __netif_schedule(qdisc); + } + } }

static inline bool qdisc_may_bulk(const struct Qdisc *qdisc) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 6e6147a81bc3..0723e7858658 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -645,8 +645,10 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc) { struct pfifo_fast_priv *priv = qdisc_priv(qdisc); struct sk_buff *skb = NULL; + bool need_retry = true; int band;

+retry: for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) { struct skb_array *q = band2list(priv, band);

@@ -657,6 +659,23 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc) } if (likely(skb)) { qdisc_update_stats_at_dequeue(qdisc, skb); + } else if (need_retry && + test_bit(__QDISC_STATE_MISSED, &qdisc->state)) { + /* Delay clearing the STATE_MISSED here to reduce + * the overhead of the second spin_trylock() in + * qdisc_run_begin() and __netif_schedule() calling + * in qdisc_run_end(). + */ + clear_bit(__QDISC_STATE_MISSED, &qdisc->state); + + /* Make sure dequeuing happens after clearing + * STATE_MISSED. + */ + smp_mb__after_atomic(); + + need_retry = false; + + goto retry; } else { WRITE_ONCE(qdisc->empty, true); }

From: Yunsheng Lin linyunsheng@huawei.com

[ Upstream commit dcad9ee9e0663d74a89b25b987f9c7be86432812 ]

The netdev qeueue might be stopped when byte queue limit has reached or tx hw ring is full, net_tx_action() may still be rescheduled if STATE_MISSED is set, which consumes unnecessary cpu without dequeuing and transmiting any skb because the netdev queue is stopped, see qdisc_run_end().

This patch fixes it by checking the netdev queue state before calling qdisc_run() and clearing STATE_MISSED if netdev queue is stopped during qdisc_run(), the net_tx_action() is rescheduled again when netdev qeueue is restarted, see netif_tx_wake_queue().

As there is time window between netif_xmit_frozen_or_stopped() checking and STATE_MISSED clearing, between which STATE_MISSED may set by net_tx_action() scheduled by netif_tx_wake_queue(), so set the STATE_MISSED again if netdev queue is restarted.

Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking") Reported-by: Michal Kubecek mkubecek@suse.cz Acked-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Yunsheng Lin linyunsheng@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/dev.c | 3 ++- net/sched/sch_generic.c | 27 ++++++++++++++++++++++++++- 2 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c index 0e38b5b044b6..e226f266da9e 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3384,7 +3384,8 @@ static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,

if (q->flags & TCQ_F_NOLOCK) { rc = q->enqueue(skb, q, &to_free) & NET_XMIT_MASK; - qdisc_run(q); + if (likely(!netif_xmit_frozen_or_stopped(txq))) + qdisc_run(q);

if (unlikely(to_free)) kfree_skb_list(to_free); diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 2b87617d023d..9bc5cbe9809b 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -35,6 +35,25 @@ const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops; EXPORT_SYMBOL(default_qdisc_ops);

+static void qdisc_maybe_clear_missed(struct Qdisc *q, + const struct netdev_queue *txq) +{ + clear_bit(__QDISC_STATE_MISSED, &q->state); + + /* Make sure the below netif_xmit_frozen_or_stopped() + * checking happens after clearing STATE_MISSED. + */ + smp_mb__after_atomic(); + + /* Checking netif_xmit_frozen_or_stopped() again to + * make sure STATE_MISSED is set if the STATE_MISSED + * set by netif_tx_wake_queue()'s rescheduling of + * net_tx_action() is cleared by the above clear_bit(). + */ + if (!netif_xmit_frozen_or_stopped(txq)) + set_bit(__QDISC_STATE_MISSED, &q->state); +} + /* Main transmission queue. */

/* Modifications to data participating in scheduling must be protected with @@ -74,6 +93,7 @@ static inline struct sk_buff *__skb_dequeue_bad_txq(struct Qdisc *q) } } else { skb = SKB_XOFF_MAGIC; + qdisc_maybe_clear_missed(q, txq); } }

@@ -242,6 +262,7 @@ static struct sk_buff *dequeue_skb(struct Qdisc *q, bool *validate, } } else { skb = NULL; + qdisc_maybe_clear_missed(q, txq); } if (lock) spin_unlock(lock); @@ -251,8 +272,10 @@ validate: *validate = true;

if ((q->flags & TCQ_F_ONETXQUEUE) && - netif_xmit_frozen_or_stopped(txq)) + netif_xmit_frozen_or_stopped(txq)) { + qdisc_maybe_clear_missed(q, txq); return skb; + }

skb = qdisc_dequeue_skb_bad_txq(q); if (unlikely(skb)) { @@ -311,6 +334,8 @@ bool sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q, HARD_TX_LOCK(dev, txq, smp_processor_id()); if (!netif_xmit_frozen_or_stopped(txq)) skb = dev_hard_start_xmit(skb, dev, txq, &ret); + else + qdisc_maybe_clear_missed(q, txq);

HARD_TX_UNLOCK(dev, txq); } else {

From: Zhen Lei thunder.leizhen@huawei.com

[ Upstream commit 28c66b6da4087b8cfe81c2ec0a46eb6116dafda9 ]

Fix to return -EPERM from the error handling case instead of 0, as done elsewhere in this function.

Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zhen Lei thunder.leizhen@huawei.com Reviewed-by: Michael Chan michael.chan@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index fbc196b480b6..c3f67d8e1093 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -8249,9 +8249,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) BNX2_WR(bp, PCI_COMMAND, reg); } else if ((BNX2_CHIP_ID(bp) == BNX2_CHIP_ID_5706_A1) && !(bp->flags & BNX2_FLAG_PCIX)) { - dev_err(&pdev->dev, "5706 A1 can only be used in a PCIX bus, aborting\n"); + rc = -EPERM; goto err_out_unmap; }

From: Taehee Yoo ap420073@gmail.com

[ Upstream commit 020ef930b826d21c5446fdc9db80fd72a791bc21 ]

mld_newpack() doesn't allow to allocate high order page, only order-0 allocation is allowed. If headroom size is too large, a kernel panic could occur in skb_put().

Test commands: ip netns del A ip netns del B ip netns add A ip netns add B ip link add veth0 type veth peer name veth1 ip link set veth0 netns A ip link set veth1 netns B

ip netns exec A ip link set lo up ip netns exec A ip link set veth0 up ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set lo up ip netns exec B ip link set veth1 up ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1 for i in {1..99} do let A=$i-1 ip netns exec A ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100 ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i ip netns exec A ip link set ip6gre$i up

ip netns exec B ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100 ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i ip netns exec B ip link set ip6gre$i up done

Splat looks like: kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x15d/0x15f Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83 41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20 RSP: 0018:ffff88810091f820 EFLAGS: 00010282 RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000 RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031 R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028 R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0 FS: 0000000000000000(0000) GS:ffff888117c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 skb_put.cold.104+0x22/0x22 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? rcu_read_lock_sched_held+0x91/0xc0 mld_newpack+0x398/0x8f0 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600 ? lock_contended+0xc40/0xc40 add_grhead.isra.33+0x280/0x380 add_grec+0x5ca/0xff0 ? mld_sendpack+0xf40/0xf40 ? lock_downgrade+0x690/0x690 mld_send_initial_cr.part.34+0xb9/0x180 ipv6_mc_dad_complete+0x15d/0x1b0 addrconf_dad_completed+0x8d2/0xbb0 ? lock_downgrade+0x690/0x690 ? addrconf_rs_timer+0x660/0x660 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0

Allowing high order page allocation could fix this problem.

Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/mcast.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index c875c9b6edbe..7d0a6a7c9d28 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -1604,10 +1604,7 @@ static struct sk_buff *mld_newpack(struct inet6_dev *idev, unsigned int mtu) IPV6_TLV_PADN, 0 };

/* we assume size > sizeof(ra) here */ - /* limit our allocations to order-0 page */ - size = min_t(int, size, SKB_MAX_ORDER(0, 0)); skb = sock_alloc_send_skb(sk, size, 1, &err); - if (!skb) return NULL;

From: David Awogbemila awogbemila@google.com

[ Upstream commit e96b491a0ffa35a8a9607c193fa4d894ca9fb32f ]

If we do not get the expected number of vectors from pci_enable_msix_range, we update priv->num_ntfy_blks but not priv->mgmt_msix_idx. This patch fixes this so that priv->mgmt_msix_idx is updated accordingly.

Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: David Awogbemila awogbemila@google.com Acked-by: Willem de Bruijn willemb@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/google/gve/gve_main.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 9b7a8db9860f..9c74251f9b6a 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -161,6 +161,7 @@ static int gve_alloc_notify_blocks(struct gve_priv *priv) int vecs_left = new_num_ntfy_blks % 2;

priv->num_ntfy_blks = new_num_ntfy_blks; + priv->mgmt_msix_idx = priv->num_ntfy_blks; priv->tx_cfg.max_queues = min_t(int, priv->tx_cfg.max_queues, vecs_per_type); priv->rx_cfg.max_queues = min_t(int, priv->rx_cfg.max_queues,

From: Catherine Sullivan csully@google.com

[ Upstream commit f81781835f0adfae8d701545386030d223efcd6f ]

As currently written, if the driver checks for more work (via gve_tx_poll or gve_rx_poll) before the device posts work and the irq doorbell is not unmasked (via iowrite32be(GVE_IRQ_ACK | GVE_IRQ_EVENT, ...)) before the device attempts to raise an interrupt, an interrupt is lost and this could potentially lead to the traffic being completely halted. For example, if a tx queue has already been stopped, the driver won't get the chance to complete work and egress will be halted.

We need a full memory barrier in the poll routine to ensure that the irq doorbell is unmasked before the driver checks for more work.

Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Catherine Sullivan csully@google.com Signed-off-by: David Awogbemila awogbemila@google.com Acked-by: Willem de Brujin willemb@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/google/gve/gve_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c index 77e79d2939ba..6ea0975d74a1 100644 --- a/drivers/net/ethernet/google/gve/gve_main.c +++ b/drivers/net/ethernet/google/gve/gve_main.c @@ -121,7 +121,7 @@ static int gve_napi_poll(struct napi_struct *napi, int budget) /* Double check we have no extra work. * Ensure unmask synchronizes with checking for work. */ - dma_rmb(); + mb(); if (block->tx) reschedule |= gve_tx_poll(block, -1); if (block->rx)

From: Raju Rangoju rajur@chelsio.com

[ Upstream commit 88c380df84fbd03f9b137c2b9d0a44b9f2f553b0 ]

Hardware register having the server TID base can contain invalid values when adapter is in bad state (for example, due to AER fatal error). Reading these invalid values in the register can lead to out-of-bound memory access. So, fix by using the saved server TID base when clearing filters.

Fixes: b1a79360ee86 ("cxgb4: Delete all hash and TCAM filters before resource cleanup") Signed-off-by: Raju Rangoju rajur@chelsio.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c index 64a2453e06ba..ccb28182f745 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c @@ -778,7 +778,7 @@ void clear_all_filters(struct adapter *adapter) cxgb4_del_filter(dev, i, &f->fs); }

- sb = t4_read_reg(adapter, LE_DB_SRVR_START_INDEX_A); + sb = adapter->tids.stid_base; for (i = 0; i < sb; i++) { f = (struct filter_entry *)adapter->tids.tid_tab[i];

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 833bc4cf9754643acc69b3c6b65988ca78df4460 ]

This error path returns zero (success) but it should return -EINVAL.

Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs35l33.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/cs35l33.c b/sound/soc/codecs/cs35l33.c index 6042194d95d3..8894369e329a 100644 --- a/sound/soc/codecs/cs35l33.c +++ b/sound/soc/codecs/cs35l33.c @@ -1201,6 +1201,7 @@ static int cs35l33_i2c_probe(struct i2c_client *i2c_client, dev_err(&i2c_client->dev, "CS35L33 Device ID (%X). Expected ID %X\n", devid, CS35L33_CHIP_ID); + ret = -EINVAL; goto err_enable; }

From: Jesse Brandeburg jesse.brandeburg@intel.com

[ Upstream commit 63e39d29b3da02e901349f6cd71159818a4737a6 ]

Check that the MTU value requested by the VF is in the supported range of MTUs before attempting to set the VF large packet enable, otherwise reject the request. This also avoids unnecessary register updates in the case of the 82599 controller.

Fixes: 872844ddb9e4 ("ixgbe: Enable jumbo frames support w/ SR-IOV") Co-developed-by: Piotr Skajewski piotrx.skajewski@intel.com Signed-off-by: Piotr Skajewski piotrx.skajewski@intel.com Signed-off-by: Jesse Brandeburg jesse.brandeburg@intel.com Co-developed-by: Mateusz Palczewski mateusz.palczewski@intel.com Signed-off-by: Mateusz Palczewski mateusz.palczewski@intel.com Tested-by: Konrad Jankowski konrad0.jankowski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 537dfff585e0..47a920128760 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -467,12 +467,16 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, return err; }

-static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) +static int ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 max_frame, u32 vf) { struct ixgbe_hw *hw = &adapter->hw; - int max_frame = msgbuf[1]; u32 max_frs;

+ if (max_frame < ETH_MIN_MTU || max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) { + e_err(drv, "VF max_frame %d out of range\n", max_frame); + return -EINVAL; + } + /* * For 82599EB we have to keep all PFs and VFs operating with * the same max_frame value in order to avoid sending an oversize @@ -533,12 +537,6 @@ static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) } }

- /* MTU < 68 is an error and causes problems on some kernels */ - if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) { - e_err(drv, "VF max_frame %d out of range\n", max_frame); - return -EINVAL; - } - /* pull current max frame size from hardware */ max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS); max_frs &= IXGBE_MHADD_MFS_MASK; @@ -1249,7 +1247,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf); break; case IXGBE_VF_SET_LPE: - retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf); + retval = ixgbe_set_vf_lpe(adapter, msgbuf[1], vf); break; case IXGBE_VF_SET_MACVLAN: retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);

From: Aleksander Jan Bajkowski olek2@wp.pl

[ Upstream commit c7718ee96dbc2f9c5fc3b578abdf296dd44b9c20 ]

In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter.

Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ") Signed-off-by: Aleksander Jan Bajkowski olek2@wp.pl Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/lantiq_xrx200.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c index 4e44a39267eb..6ece99e6b6dd 100644 --- a/drivers/net/ethernet/lantiq_xrx200.c +++ b/drivers/net/ethernet/lantiq_xrx200.c @@ -154,6 +154,7 @@ static int xrx200_close(struct net_device *net_dev)

static int xrx200_alloc_skb(struct xrx200_chan *ch) { + dma_addr_t mapping; int ret = 0;

ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev, @@ -163,16 +164,17 @@ static int xrx200_alloc_skb(struct xrx200_chan *ch) goto skip; }

- ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(ch->priv->dev, - ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN, - DMA_FROM_DEVICE); - if (unlikely(dma_mapping_error(ch->priv->dev, - ch->dma.desc_base[ch->dma.desc].addr))) { + mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data, + XRX200_DMA_DATA_LEN, DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) { dev_kfree_skb_any(ch->skb[ch->dma.desc]); ret = -ENOMEM; goto skip; }

+ ch->dma.desc_base[ch->dma.desc].addr = mapping; + /* Make sure the address is written before we give it to HW */ + wmb(); skip: ch->dma.desc_base[ch->dma.desc].ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | @@ -196,6 +198,8 @@ static int xrx200_hw_receive(struct xrx200_chan *ch) ch->dma.desc %= LTQ_DESC_NUM;

if (ret) { + ch->skb[ch->dma.desc] = skb; + net_dev->stats.rx_dropped++; netdev_err(net_dev, "failed to allocate new rx buffer\n"); return ret; }

From: kernel test robot lkp@intel.com

[ Upstream commit 2b899f31f1a6db2db4608bac2ac04fe2c4ad89eb ]

sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?

Fixes: 265d1a90e4fb ("ALSA: usb-audio: scarlett2: Improve driver startup messages") Reported-by: kernel test robot lkp@intel.com Signed-off-by: kernel test robot lkp@intel.com Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9 Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/mixer_scarlett_gen2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index a973dd4d5bbe..7a10c9e22c46 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -1997,8 +1997,8 @@ static int scarlett2_mixer_status_create(struct usb_mixer_interface *mixer) return usb_submit_urb(mixer->urb, GFP_KERNEL); }

-int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer, - const struct scarlett2_device_info *info) +static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer, + const struct scarlett2_device_info *info) { int err;