From: Sai Krishna Potthuri lakshmi.sai.krishna.potthuri@xilinx.com
[ Upstream commit 21b511ddee09a78909035ec47a6a594349fe3296 ]
As part of unprepare_transfer_hardware, SPI controller will be disabled which will indirectly deassert the CS line. This will create a problem in some of the devices where message will be transferred with cs_change flag set(CS should not be deasserted). As per SPI controller implementation, if SPI controller is disabled then all output enables are inactive and all pins are set to input mode which means CS will go to default state high(deassert). This leads to an issue when core explicitly ask not to deassert the CS (cs_change = 1). This patch fix the above issue by checking the Slave select status bits from configuration register before disabling the SPI.
Signed-off-by: Sai Krishna Potthuri lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Amit Kumar Mahapatra amit.kumar-mahapatra@xilinx.com Link: https://lore.kernel.org/r/20220606062525.18447-1-amit.kumar-mahapatra@xilinx... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cadence.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index d9aeb9efa7aa..810f92a0ef7c 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -73,6 +73,7 @@ #define CDNS_SPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */ #define CDNS_SPI_SS_SHIFT 10 /* Slave Select field shift in CR */ #define CDNS_SPI_SS0 0x1 /* Slave Select zero */ +#define CDNS_SPI_NOSS 0x3C /* No Slave select */
/* * SPI Interrupt Registers bit Masks @@ -457,15 +458,20 @@ static int cdns_prepare_transfer_hardware(struct spi_master *master) * @master: Pointer to the spi_master structure which provides * information about the controller. * - * This function disables the SPI master controller. + * This function disables the SPI master controller when no slave selected. * * Return: 0 always */ static int cdns_unprepare_transfer_hardware(struct spi_master *master) { struct cdns_spi *xspi = spi_master_get_devdata(master); + u32 ctrl_reg;
- cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE); + /* Disable the SPI if slave is deselected */ + ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR); + ctrl_reg = (ctrl_reg & CDNS_SPI_CR_SSCTRL) >> CDNS_SPI_SS_SHIFT; + if (ctrl_reg == CDNS_SPI_NOSS) + cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
return 0; }
From: Lars-Peter Clausen lars@metafoo.de
[ Upstream commit 7b40322f7183a92c4303457528ae7cda571c60b9 ]
The depth of the transmit FIFO for the Cadence SPI controller is currently hardcoded to 128. But the depth is a synthesis configuration parameter of the core and can vary between different SoCs.
If the configured FIFO size is less than 128 the driver will busy loop in the cdns_spi_fill_tx_fifo() function waiting for FIFO space to become available.
Depending on the length and speed of the transfer it can spin for a significant amount of time. The cdns_spi_fill_tx_fifo() function is called from the drivers interrupt handler, so it can leave interrupts disabled for a prolonged amount of time.
In addition the read FIFO will also overflow and data will be discarded.
To avoid this detect the actual size of the FIFO and use that rather than the hardcoded value.
To detect the FIFO size the FIFO threshold register is used. The register is sized so that it can hold FIFO size - 1 as its maximum value. Bits that are not needed to hold the threshold value will always read 0. By writing 0xffff to the register and then reading back the value in the register we get the FIFO size.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de Link: https://lore.kernel.org/r/20220527091143.3780378-1-lars@metafoo.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cadence.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 810f92a0ef7c..b41fdaa6982d 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -97,9 +97,6 @@ #define CDNS_SPI_ER_ENABLE 0x00000001 /* SPI Enable Bit Mask */ #define CDNS_SPI_ER_DISABLE 0x0 /* SPI Disable Bit Mask */
-/* SPI FIFO depth in bytes */ -#define CDNS_SPI_FIFO_DEPTH 128 - /* Default number of chip select lines */ #define CDNS_SPI_DEFAULT_NUM_CS 4
@@ -115,6 +112,7 @@ * @rx_bytes: Number of bytes requested * @dev_busy: Device busy flag * @is_decoded_cs: Flag for decoder property set or not + * @tx_fifo_depth: Depth of the TX FIFO */ struct cdns_spi { void __iomem *regs; @@ -128,6 +126,7 @@ struct cdns_spi { int rx_bytes; u8 dev_busy; u32 is_decoded_cs; + unsigned int tx_fifo_depth; };
struct cdns_spi_device_data { @@ -313,7 +312,7 @@ static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi) { unsigned long trans_cnt = 0;
- while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) && + while ((trans_cnt < xspi->tx_fifo_depth) && (xspi->tx_bytes > 0)) {
/* When xspi in busy condition, bytes may send failed, @@ -534,6 +533,24 @@ static void cdns_spi_cleanup(struct spi_device *spi)
}
+/** + * cdns_spi_detect_fifo_depth - Detect the FIFO depth of the hardware + * @xspi: Pointer to the cdns_spi structure + * + * The depth of the TX FIFO is a synthesis configuration parameter of the SPI + * IP. The FIFO threshold register is sized so that its maximum value can be the + * FIFO size - 1. This is used to detect the size of the FIFO. + */ +static void cdns_spi_detect_fifo_depth(struct cdns_spi *xspi) +{ + /* The MSBs will get truncated giving us the size of the FIFO */ + cdns_spi_write(xspi, CDNS_SPI_THLD, 0xffff); + xspi->tx_fifo_depth = cdns_spi_read(xspi, CDNS_SPI_THLD) + 1; + + /* Reset to default */ + cdns_spi_write(xspi, CDNS_SPI_THLD, 0x1); +} + /** * cdns_spi_probe - Probe method for the SPI driver * @pdev: Pointer to the platform_device structure @@ -608,6 +625,8 @@ static int cdns_spi_probe(struct platform_device *pdev) if (ret < 0) xspi->is_decoded_cs = 0;
+ cdns_spi_detect_fifo_depth(xspi); + /* SPI controller initializations */ cdns_spi_init_hw(xspi);
From: Daniil Dementev d.dementev@ispras.ru
[ Upstream commit 3ddbe35d9a2ebd4924d458e0246b4ba6c13bb456 ]
Buffer overflow could occur in the loop "while", due to accessing an array element before checking the index.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Daniil Dementev d.dementev@ispras.ru Reviewed-by: Alexey Khoroshilov khoroshilov@ispras.ru Link: https://lore.kernel.org/r/20220610165732.2904-1-d.dementev@ispras.ru Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/mixer_us16x08.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/usb/mixer_us16x08.c b/sound/usb/mixer_us16x08.c index 7db3032e723a..5e3b7fd43fc2 100644 --- a/sound/usb/mixer_us16x08.c +++ b/sound/usb/mixer_us16x08.c @@ -647,10 +647,10 @@ static int snd_get_meter_comp_index(struct snd_us16x08_meter_store *store) } } else { /* skip channels with no compressor active */ - while (!store->comp_store->val[ + while (store->comp_index <= SND_US16X08_MAX_CHANNELS + && !store->comp_store->val[ COMP_STORE_IDX(SND_US16X08_ID_COMP_SWITCH)] - [store->comp_index - 1] - && store->comp_index <= SND_US16X08_MAX_CHANNELS) { + [store->comp_index - 1]) { store->comp_index++; } ret = store->comp_index++;
From: Maxime Ripard maxime@cerno.tech
[ Upstream commit 2523e9dcc3be91bf9fdc0d1e542557ca00bbef42 ]
We'll need to extend the vc4_async_flip_state structure to rely on another callback implementation, so let's move the current one into a union.
Reviewed-by: Melissa Wen mwen@igalia.com Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://lore.kernel.org/r/20220610115149.964394-10-maxime@cerno.tech Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/vc4/vc4_crtc.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c index 7747f160c740..2ef60dd42a52 100644 --- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -737,17 +737,17 @@ struct vc4_async_flip_state { struct drm_framebuffer *fb; struct drm_pending_vblank_event *event;
- struct vc4_seqno_cb cb; + union { + struct vc4_seqno_cb seqno; + } cb; };
/* Called when the V3D execution for the BO being flipped to is done, so that * we can actually update the plane's address to point to it. */ static void -vc4_async_page_flip_complete(struct vc4_seqno_cb *cb) +vc4_async_page_flip_complete(struct vc4_async_flip_state *flip_state) { - struct vc4_async_flip_state *flip_state = - container_of(cb, struct vc4_async_flip_state, cb); struct drm_crtc *crtc = flip_state->crtc; struct drm_device *dev = crtc->dev; struct vc4_dev *vc4 = to_vc4_dev(dev); @@ -769,6 +769,14 @@ vc4_async_page_flip_complete(struct vc4_seqno_cb *cb) up(&vc4->async_modeset); }
+static void vc4_async_page_flip_seqno_complete(struct vc4_seqno_cb *cb) +{ + struct vc4_async_flip_state *flip_state = + container_of(cb, struct vc4_async_flip_state, cb.seqno); + + vc4_async_page_flip_complete(flip_state); +} + /* Implements async (non-vblank-synced) page flips. * * The page flip ioctl needs to return immediately, so we grab the @@ -814,8 +822,8 @@ static int vc4_async_page_flip(struct drm_crtc *crtc, drm_atomic_set_fb_for_plane(plane->state, fb); plane->fb = fb;
- vc4_queue_seqno_cb(dev, &flip_state->cb, bo->seqno, - vc4_async_page_flip_complete); + vc4_queue_seqno_cb(dev, &flip_state->cb.seqno, bo->seqno, + vc4_async_page_flip_seqno_complete);
/* Driver takes ownership of state on successful async commit. */ return 0;
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit e87c65aeb46ca4f5b7dc08531200bcb8a426c62e ]
The existing code uses pm_runtime_get_sync/put_autosuspend, but pm_runtime was not explicitly enabled. The autosuspend delay was not set either, the value is set to 5s since HDMI is rather painful to resume.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20220616222910.136854-2-pierre-louis.bossart@linux... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/x86/intel_hdmi_audio.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index bf894087e5fa..84ac01b6e93d 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -42,6 +42,8 @@ #include <drm/intel_lpe_audio.h> #include "intel_hdmi_audio.h"
+#define INTEL_HDMI_AUDIO_SUSPEND_DELAY_MS 5000 + #define for_each_pipe(card_ctx, pipe) \ for ((pipe) = 0; (pipe) < (card_ctx)->num_pipes; (pipe)++) #define for_each_port(card_ctx, port) \ @@ -1885,8 +1887,11 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) pdata->notify_audio_lpe = notify_audio_lpe; spin_unlock_irq(&pdata->lpe_audio_slock);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, INTEL_HDMI_AUDIO_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_enable(&pdev->dev); pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_idle(&pdev->dev);
dev_dbg(&pdev->dev, "%s: handle pending notification\n", __func__); for_each_port(card_ctx, port) {
From: Wentao_Liang Wentao_Liang_g@163.com
[ Upstream commit 8fc74d18639a2402ca52b177e990428e26ea881f ]
The pointer vdev points to a memory region adjacent to a net_device structure ndev, which is a field of hldev. At line 4740, the invocation to vxge_device_unregister unregisters device hldev, and it also releases the memory region pointed by vdev->bar0. At line 4743, the freed memory region is referenced (i.e., iounmap(vdev->bar0)), resulting in a use-after-free vulnerability. We can fix the bug by calling iounmap before vxge_device_unregister.
4721. static void vxge_remove(struct pci_dev *pdev) 4722. { 4723. struct __vxge_hw_device *hldev; 4724. struct vxgedev *vdev; … 4731. vdev = netdev_priv(hldev->ndev); … 4740. vxge_device_unregister(hldev); 4741. /* Do not call pci_disable_sriov here, as it will break child devices */ 4742. vxge_hw_device_terminate(hldev); 4743. iounmap(vdev->bar0); … 4749 vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered", 4750 __func__, __LINE__); 4751 vxge_debug_entryexit(vdev->level_trace, "%s:%d Exiting...", __func__, 4752 __LINE__); 4753. }
This is the screenshot when the vulnerability is triggered by using KASAN. We can see that there is a use-after-free reported by KASAN.
/***************************start**************************/
root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove [ 178.296316] vxge_remove [ 182.057081] ================================================================== [ 182.057548] BUG: KASAN: use-after-free in vxge_remove+0xe0/0x15c [ 182.057760] Read of size 8 at addr ffff888006c76598 by task bash/119 [ 182.057983] [ 182.058747] CPU: 0 PID: 119 Comm: bash Not tainted 5.18.0 #5 [ 182.058919] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 182.059463] Call Trace: [ 182.059726] <TASK> [ 182.060017] dump_stack_lvl+0x34/0x44 [ 182.060316] print_report.cold+0xb2/0x6b7 [ 182.060401] ? kfree+0x89/0x290 [ 182.060478] ? vxge_remove+0xe0/0x15c [ 182.060545] kasan_report+0xa9/0x120 [ 182.060629] ? vxge_remove+0xe0/0x15c [ 182.060706] vxge_remove+0xe0/0x15c [ 182.060793] pci_device_remove+0x5d/0xe0 [ 182.060968] device_release_driver_internal+0xf1/0x180 [ 182.061063] pci_stop_bus_device+0xae/0xe0 [ 182.061150] pci_stop_and_remove_bus_device_locked+0x11/0x20 [ 182.061236] remove_store+0xc6/0xe0 [ 182.061297] ? subordinate_bus_number_show+0xc0/0xc0 [ 182.061359] ? __mutex_lock_slowpath+0x10/0x10 [ 182.061438] ? sysfs_kf_write+0x6d/0xa0 [ 182.061525] kernfs_fop_write_iter+0x1b0/0x260 [ 182.061610] ? sysfs_kf_bin_read+0xf0/0xf0 [ 182.061695] new_sync_write+0x209/0x310 [ 182.061789] ? new_sync_read+0x310/0x310 [ 182.061865] ? cgroup_rstat_updated+0x5c/0x170 [ 182.061937] ? preempt_count_sub+0xf/0xb0 [ 182.061995] ? pick_next_entity+0x13a/0x220 [ 182.062063] ? __inode_security_revalidate+0x44/0x80 [ 182.062155] ? security_file_permission+0x46/0x2a0 [ 182.062230] vfs_write+0x33f/0x3e0 [ 182.062303] ksys_write+0xb4/0x150 [ 182.062369] ? __ia32_sys_read+0x40/0x40 [ 182.062451] do_syscall_64+0x3b/0x90 [ 182.062531] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 182.062894] RIP: 0033:0x7f3f37d17274 [ 182.063558] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 89 54 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 182.063797] RSP: 002b:00007ffd5ba9e178 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 182.064117] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3f37d17274 [ 182.064219] RDX: 0000000000000002 RSI: 000055bbec327180 RDI: 0000000000000001 [ 182.064315] RBP: 000055bbec327180 R08: 000000000000000a R09: 00007f3f37de7cf0 [ 182.064414] R10: 000000000000000a R11: 0000000000000246 R12: 00007f3f37de8760 [ 182.064513] R13: 0000000000000002 R14: 00007f3f37de3760 R15: 0000000000000002 [ 182.064691] </TASK> [ 182.064916] [ 182.065224] The buggy address belongs to the physical page: [ 182.065804] page:00000000ef31e4f4 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x6c76 [ 182.067419] flags: 0x100000000000000(node=0|zone=1) [ 182.068997] raw: 0100000000000000 0000000000000000 ffffea00001b1d88 0000000000000000 [ 182.069118] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 182.069294] page dumped because: kasan: bad access detected [ 182.069331] [ 182.069360] Memory state around the buggy address: [ 182.070006] ffff888006c76480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070136] ffff888006c76500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070230] >ffff888006c76580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070305] ^ [ 182.070456] ffff888006c76600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070505] ffff888006c76680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070606] ================================================================== [ 182.071374] Disabling lock debugging due to kernel taint
/*****************************end*****************************/
After fixing the bug as done in the patch, we can find KASAN do not report the bug and the device(00:03.0) has been successfully removed.
/*****************************start***************************/
root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove root@kernel:~#
/******************************end****************************/
Signed-off-by: Wentao_Liang Wentao_Liang_g@163.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index e69e76bb2c77..d17dd9410b96 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -4788,10 +4788,10 @@ static void vxge_remove(struct pci_dev *pdev) for (i = 0; i < vdev->no_of_vpath; i++) vxge_free_mac_add_list(&vdev->vpaths[i]);
+ iounmap(vdev->bar0); vxge_device_unregister(hldev); /* Do not call pci_disable_sriov here, as it will break child devices */ vxge_hw_device_terminate(hldev); - iounmap(vdev->bar0); pci_release_region(pdev, 0); pci_disable_device(pdev); driver_config->config_dev_cnt--;
From: Xiang wangx wangxiang@cdjrlc.com
[ Upstream commit fc378794a2f7a19cf26010dc33b89ba608d4c70f ]
Delete the redundant word 'its'.
Signed-off-by: Xiang wangx wangxiang@cdjrlc.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/skeletonfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c index 7f4e908330bf..b7d364673026 100644 --- a/drivers/video/fbdev/skeletonfb.c +++ b/drivers/video/fbdev/skeletonfb.c @@ -96,7 +96,7 @@ static const struct fb_fix_screeninfo xxxfb_fix = {
/* * Modern graphical hardware not only supports pipelines but some - * also support multiple monitors where each display can have its + * also support multiple monitors where each display can have * its own unique data. In this case each display could be * represented by a separate framebuffer device thus a separate * struct fb_info. Now the struct xxx_par represents the graphics
From: Petr Cvek petrcvekcz@gmail.com
[ Upstream commit 25c9a15fb7bbfafb94dd3b4e3165c18b8e1bd039 ]
Aperture size for i9x5 variants is determined from PCI base address.
if (pci_resource_start(pdev, 2) & 0x08000000) *aperture_size = MB(128); ...
This condition is incorrect as 128 MiB address can have the address set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just use pci_resource_len().
The true settings of the aperture size is in the MSAC register, which could be used instead. However the value is used only as an info message, so it doesn't matter.
Signed-off-by: Petr Cvek petrcvekcz@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/intelfb/intelfbhw.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/video/fbdev/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c index d31ed4e2c46f..3aa93565e935 100644 --- a/drivers/video/fbdev/intelfb/intelfbhw.c +++ b/drivers/video/fbdev/intelfb/intelfbhw.c @@ -199,13 +199,11 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size, case PCI_DEVICE_ID_INTEL_945GME: case PCI_DEVICE_ID_INTEL_965G: case PCI_DEVICE_ID_INTEL_965GM: - /* 915, 945 and 965 chipsets support a 256MB aperture. - Aperture size is determined by inspected the - base address of the aperture. */ - if (pci_resource_start(pdev, 2) & 0x08000000) - *aperture_size = MB(128); - else - *aperture_size = MB(256); + /* + * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB + * aperture. Determine size from PCI resource length. + */ + *aperture_size = pci_resource_len(pdev, 2); break; default: if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
From: Hyunwoo Kim imv4bel@gmail.com
[ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ]
In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user().
Signed-off-by: Hyunwoo Kim imv4bel@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/pxa3xx-gcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c index 4febbe21b9b5..db861bb39150 100644 --- a/drivers/video/fbdev/pxa3xx-gcu.c +++ b/drivers/video/fbdev/pxa3xx-gcu.c @@ -391,7 +391,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff, struct pxa3xx_gcu_batch *buffer; struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
- int words = count / 4; + size_t words = count / 4;
/* Does not need to be atomic. There's a lock in user space, * but anyhow, this is just for statistics. */
From: Yihao Han hanyihao@vivo.com
[ Upstream commit 5491424d17bdeb7b7852a59367858251783f8398 ]
clk_put() already checks the clk ptr using !clk and IS_ERR() so there is no need to check it again before calling it.
Signed-off-by: Yihao Han hanyihao@vivo.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/simplefb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/simplefb.c b/drivers/video/fbdev/simplefb.c index a3c44ecf4523..b7ad20ff8d2a 100644 --- a/drivers/video/fbdev/simplefb.c +++ b/drivers/video/fbdev/simplefb.c @@ -233,8 +233,7 @@ static int simplefb_clocks_get(struct simplefb_par *par, if (IS_ERR(clock)) { if (PTR_ERR(clock) == -EPROBE_DEFER) { while (--i >= 0) { - if (par->clks[i]) - clk_put(par->clks[i]); + clk_put(par->clks[i]); } kfree(par->clks); return -EPROBE_DEFER;
From: Liang He windhl@126.com
[ Upstream commit 608d94cb84c42585058d692f2fe5d327f8868cdb ]
In update_gic_frequency_dt(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/mti-malta/malta-time.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index 66c866740ff2..eef336192d7f 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -231,6 +231,8 @@ static void update_gic_frequency_dt(void)
if (of_update_property(node, &gic_frequency_prop) < 0) pr_err("error updating gic frequency property\n"); + + of_node_put(node); }
#endif
From: Liang He windhl@126.com
[ Upstream commit 48ca54e39173d1ed4c4dc8cf045484014bb26eaf ]
In plat_of_remap_node(), plat_of_remap_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/ralink/of.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index 1f7c686f7218..3cfd5809243e 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -42,6 +42,8 @@ __iomem void *plat_of_remap_node(const char *node) if (of_address_to_resource(np, 0, &res)) panic("Failed to get resource for %s", node);
+ of_node_put(np); + if (!request_mem_region(res.start, resource_size(&res), res.name))
From: Liang He windhl@126.com
[ Upstream commit 72a2af539fff975caadd9a4db3f99963569bd9c9 ]
In ltq_soc_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lantiq/falcon/sysctrl.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c index 714d92659489..665739bd4190 100644 --- a/arch/mips/lantiq/falcon/sysctrl.c +++ b/arch/mips/lantiq/falcon/sysctrl.c @@ -210,6 +210,12 @@ void __init ltq_soc_init(void) of_address_to_resource(np_sysgpe, 0, &res_sys[2])) panic("Failed to get core resources");
+ of_node_put(np_status); + of_node_put(np_ebu); + of_node_put(np_sys1); + of_node_put(np_syseth); + of_node_put(np_sysgpe); + if ((request_mem_region(res_status.start, resource_size(&res_status), res_status.name) < 0) || (request_mem_region(res_ebu.start, resource_size(&res_ebu),
From: Liang He windhl@126.com
[ Upstream commit 76695592711ef1e215cc24ed3e1cd857d7fc3098 ]
In ltq_soc_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lantiq/xway/sysctrl.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c index 1b1142c7bb85..454f10a8db50 100644 --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -439,6 +439,10 @@ void __init ltq_soc_init(void) of_address_to_resource(np_ebu, 0, &res_ebu)) panic("Failed to get core resources");
+ of_node_put(np_pmu); + of_node_put(np_cgu); + of_node_put(np_ebu); + if (!request_mem_region(res_pmu.start, resource_size(&res_pmu), res_pmu.name) || !request_mem_region(res_cgu.start, resource_size(&res_cgu),
From: Liang He windhl@126.com
[ Upstream commit eb9e9bc4fa5fb489c92ec588b3fb35f042ba6d86 ]
of_find_matching_node(), of_find_compatible_node() and of_find_node_by_path() will return node pointers with refcout incremented. We should call of_node_put() when they are not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/pic32/pic32mzda/init.c | 7 ++++++- arch/mips/pic32/pic32mzda/time.c | 3 +++ 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c index 406c6c5cec29..f8985d4573e6 100644 --- a/arch/mips/pic32/pic32mzda/init.c +++ b/arch/mips/pic32/pic32mzda/init.c @@ -131,13 +131,18 @@ static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup) np = of_find_compatible_node(NULL, NULL, lookup->compatible); if (np) { lookup->name = (char *)np->name; - if (lookup->phys_addr) + if (lookup->phys_addr) { + of_node_put(np); continue; + } if (!of_address_to_resource(np, 0, &res)) lookup->phys_addr = res.start; + of_node_put(np); } }
+ of_node_put(root); + return 0; }
diff --git a/arch/mips/pic32/pic32mzda/time.c b/arch/mips/pic32/pic32mzda/time.c index 1894e50939b5..04879b85aac9 100644 --- a/arch/mips/pic32/pic32mzda/time.c +++ b/arch/mips/pic32/pic32mzda/time.c @@ -40,6 +40,9 @@ static unsigned int pic32_xlate_core_timer_irq(void) goto default_map;
irq = irq_of_parse_and_map(node, 0); + + of_node_put(node); + if (!irq) goto default_map;
From: Liang He windhl@126.com
[ Upstream commit 3748d2185ac4c2c6f80989672253aad909ecaf95 ]
In icu_of_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lantiq/irq.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index 0476d7e97a03..6e3ace045b26 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -342,6 +342,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) if (!ltq_eiu_membase) panic("Failed to remap eiu memory"); } + of_node_put(eiu_node);
return 0; }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin