[PATCH AUTOSEL 6.6 01/39] Input: psmouse - enable Synaptics InterTouch for ThinkPad L14 G1
From: José Pekkarinen jose.pekkarinen@foxhound.fi
[ Upstream commit c1f342f35f820b33390571293498c3e2e9bc77ec ]
Observed on dmesg of my laptop I see the following output:
[ 19.898700] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694] [ 19.936057] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [ 19.936076] psmouse serio1: synaptics: Your touchpad (PNP: LEN0411 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 20.008901] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640 [ 20.008925] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 20.053344] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 20.397608] mousedev: PS/2 mouse device common for all mice
This patch will add its pnp id to the smbus list to produce the setup of intertouch for the device.
Signed-off-by: José Pekkarinen jose.pekkarinen@foxhound.fi Link: https://lore.kernel.org/r/20231114063607.71772-1-jose.pekkarinen@foxhound.fi Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 22d16d80efb93..7a303a9d6bf72 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -183,6 +183,7 @@ static const char * const smbus_pnp_ids[] = { "LEN009b", /* T580 */ "LEN0402", /* X1 Extreme Gen 2 / P1 Gen 2 */ "LEN040f", /* P1 Gen 3 */ + "LEN0411", /* L14 Gen 1 */ "LEN200f", /* T450s */ "LEN2044", /* L470 */ "LEN2054", /* E480 */
From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
[ Upstream commit b5ec294472794ed9ecba0cb4b8208372842e7e0d ]
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes:
hi6220_reset.c:166:9: error: cast to smaller integer type 'enum hi6220_reset_ctrl_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20230810091300.70197-1-krzysztof.kozlowski@linaro.... Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/reset/hisilicon/hi6220_reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c index 8d1fce18ded78..5c3267acd2b1c 100644 --- a/drivers/reset/hisilicon/hi6220_reset.c +++ b/drivers/reset/hisilicon/hi6220_reset.c @@ -163,7 +163,7 @@ static int hi6220_reset_probe(struct platform_device *pdev) if (!data) return -ENOMEM;
- type = (enum hi6220_reset_ctrl_type)of_device_get_match_data(dev); + type = (uintptr_t)of_device_get_match_data(dev);
regmap = syscon_node_to_regmap(np); if (IS_ERR(regmap)) {
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 936e4d49ecbc8c404790504386e1422b599dec39 ]
There have been multiple reports of keyboard issues on recent laptop models which can be worked around by setting i8042.dumbkbd, with the downside being this breaks the capslock LED.
It seems that these issues are caused by recent laptops getting confused by ATKBD_CMD_GETID. Rather then adding and endless growing list of quirks for this, just skip ATKBD_CMD_GETID alltogether on laptops in translated mode.
The main goal of sending ATKBD_CMD_GETID is to skip binding to ps/2 mice/touchpads and those are never used in translated mode.
Examples of laptop models which benefit from skipping ATKBD_CMD_GETID:
* "HP Laptop 15s-fq2xxx", "HP laptop 15s-fq4xxx" and "HP Laptop 15-dy2xxx" models the kbd stops working for the first 2 - 5 minutes after boot (waiting for EC watchdog reset?)
* On "HP Spectre x360 13-aw2xxx" atkbd fails to probe the keyboard
* At least 9 different Lenovo models have issues with ATKBD_CMD_GETID, see: https://github.com/yescallop/atkbd-nogetid
This has been tested on:
1. A MSI B550M PRO-VDH WIFI desktop, where the i8042 controller is not in translated mode when no keyboard is plugged in and with a ps/2 kbd a "AT Translated Set 2 keyboard" /dev/input/event# node shows up
2. A Lenovo ThinkPad X1 Yoga gen 8 (always has a translated set 2 keyboard)
Reported-by: Shang Ye yesh25@mail2.sysu.edu.cn Closes: https://lore.kernel.org/linux-input/886D6167733841AE+20231017135318.11142-1-... Closes: https://github.com/yescallop/atkbd-nogetid Reported-by: gurevitch mail@gurevit.ch Closes: https://lore.kernel.org/linux-input/2iAJTwqZV6lQs26cTb38RNYqxvsink6SRmrZ5h0c... Reported-by: Egor Ignatov egori@altlinux.org Closes: https://lore.kernel.org/all/20210609073333.8425-1-egori@altlinux.org/ Reported-by: Anton Zhilyaev anton@cpp.in Closes: https://lore.kernel.org/linux-input/20210201160336.16008-1-anton@cpp.in/ Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2086156 Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20231115174625.7462-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/keyboard/atkbd.c | 46 +++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 4 deletions(-)
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index c92e544c792df..786f00f6b7fd8 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -765,6 +765,44 @@ static void atkbd_deactivate(struct atkbd *atkbd) ps2dev->serio->phys); }
+#ifdef CONFIG_X86 +static bool atkbd_is_portable_device(void) +{ + static const char * const chassis_types[] = { + "8", /* Portable */ + "9", /* Laptop */ + "10", /* Notebook */ + "14", /* Sub-Notebook */ + "31", /* Convertible */ + "32", /* Detachable */ + }; + int i; + + for (i = 0; i < ARRAY_SIZE(chassis_types); i++) + if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i])) + return true; + + return false; +} + +/* + * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops + * the controller is always in translated mode. In this mode mice/touchpads will + * not work. So in this case simply assume a keyboard is connected to avoid + * confusing some laptop keyboards. + * + * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is + * ok in translated mode, only atkbd_select_set() checks atkbd->id and in + * translated mode that is a no-op. + */ +static bool atkbd_skip_getid(struct atkbd *atkbd) +{ + return atkbd->translated && atkbd_is_portable_device(); +} +#else +static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; } +#endif + /* * atkbd_probe() probes for an AT keyboard on a serio port. */ @@ -794,12 +832,12 @@ static int atkbd_probe(struct atkbd *atkbd) */
param[0] = param[1] = 0xa5; /* initialize with invalid values */ - if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { + if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
/* - * If the get ID command failed, we check if we can at least set the LEDs on - * the keyboard. This should work on every keyboard out there. It also turns - * the LEDs off, which we want anyway. + * If the get ID command was skipped or failed, we check if we can at least set + * the LEDs on the keyboard. This should work on every keyboard out there. + * It also turns the LEDs off, which we want anyway. */ param[0] = 0; if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
From: Esther Shimanovich eshimanovich@chromium.org
[ Upstream commit 335fe00319e030d481a54d5e0e68d50c5e672c0e ]
After the laptop lid is opened, and the device resumes from S3 deep sleep, if the user presses a keyboard key while the screen is still black, the mouse and keyboard become unusable.
Enabling this quirk prevents this behavior from occurring.
Signed-off-by: Esther Shimanovich eshimanovich@chromium.org Link: https://lore.kernel.org/r/20231130195615.v2.1.Ibe78a9df97ecd18dc227a5cff67d3... Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 9c39553d30fa2..b585b1dab870e 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -360,6 +360,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { }, .driver_data = (void *)(SERIO_QUIRK_DRITEK) }, + { + /* Acer TravelMate P459-G2-M */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate P459-G2-M"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, { /* Amoi M636/A737 */ .matches = {
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit 42b8ff47720258d1f6a4412e780a480c139773a0 ]
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20231201133747.1099286-2-u.kleine-koenig@pengutron... Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/mouse/amimouse.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index a50e503548323..cda0c3ff5a288 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -125,16 +125,15 @@ static int __init amimouse_probe(struct platform_device *pdev) return 0; }
-static int __exit amimouse_remove(struct platform_device *pdev) +static void __exit amimouse_remove(struct platform_device *pdev) { struct input_dev *dev = platform_get_drvdata(pdev);
input_unregister_device(dev); - return 0; }
static struct platform_driver amimouse_driver = { - .remove = __exit_p(amimouse_remove), + .remove_new = __exit_p(amimouse_remove), .driver = { .name = "amiga-mouse", },
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit 2fff0b5e1a6b9c577b4dd4958902c877159c856b ]
If a pin isn't marked as a wake source processing any interrupts is just going to destroy battery life. The APU may wake up from a hardware sleep state to process the interrupt but not return control to the OS.
Mask interrupt for all non-wake source pins at suspend. They'll be re-enabled at resume.
Reported-and-tested-by: Marcus Aram marcus+oss@oxar.nl Reported-and-tested-by: Mark Herbert mark.herbert42@gmail.com Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2812 Signed-off-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20231203032431.30277-3-mario.limonciello@amd.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-amd.c | 9 +++++++++ drivers/pinctrl/pinctrl-amd.h | 5 +++++ 2 files changed, 14 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 74241b2ff21e3..86034c457c043 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -923,6 +923,15 @@ static int amd_gpio_suspend(struct device *dev)
raw_spin_lock_irqsave(&gpio_dev->lock, flags); gpio_dev->saved_regs[i] = readl(gpio_dev->base + pin * 4) & ~PIN_IRQ_PENDING; + + /* mask any interrupts not intended to be a wake source */ + if (!(gpio_dev->saved_regs[i] & WAKE_SOURCE)) { + writel(gpio_dev->saved_regs[i] & ~BIT(INTERRUPT_MASK_OFF), + gpio_dev->base + pin * 4); + pm_pr_dbg("Disabling GPIO #%d interrupt for suspend.\n", + pin); + } + raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); }
diff --git a/drivers/pinctrl/pinctrl-amd.h b/drivers/pinctrl/pinctrl-amd.h index 34c5c3e71fb26..cf59089f27763 100644 --- a/drivers/pinctrl/pinctrl-amd.h +++ b/drivers/pinctrl/pinctrl-amd.h @@ -80,6 +80,11 @@ #define FUNCTION_MASK GENMASK(1, 0) #define FUNCTION_INVALID GENMASK(7, 0)
+#define WAKE_SOURCE (BIT(WAKE_CNTRL_OFF_S0I3) | \ + BIT(WAKE_CNTRL_OFF_S3) | \ + BIT(WAKE_CNTRL_OFF_S4) | \ + BIT(WAKECNTRL_Z_OFF)) + struct amd_function { const char *name; const char * const groups[NSELECTS];
From: Nam Cao namcao@linutronix.de
[ Upstream commit 7a733e060bd20edb63b1f27f0b29cf9b184e0e8b ]
The commit 855a40cd8ccc ("spi: cadence: Add SPI transfer delays") adds a delay after each transfer into the driver's transfer_one(). However, the delay is already done in SPI core. So this commit unnecessarily doubles the delay amount. Revert this commit.
Signed-off-by: Nam Cao namcao@linutronix.de Link: https://lore.kernel.org/r/20231206145233.74982-1-namcao@linutronix.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cadence.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 12c940ba074ab..bd96d8b546cdb 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -451,7 +451,6 @@ static int cdns_transfer_one(struct spi_controller *ctlr, udelay(10);
cdns_spi_process_fifo(xspi, xspi->tx_fifo_depth, 0); - spi_transfer_delay_exec(transfer);
cdns_spi_write(xspi, CDNS_SPI_IER, CDNS_SPI_IXR_DEFAULT); return transfer->len;
From: Ricardo Rivera-Matos rriveram@opensource.cirrus.com
[ Upstream commit 12e102b1bd22ee00361559d57a5876445bcb2407 ]
Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to conditionally export the runtime/system PM functions.
Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS() helpers with their modern alternatives and get rid of the now unnecessary '__maybe_unused' annotations on all PM functions.
Additionally, use the pm_ptr() macro to fix the following errors when building with CONFIG_PM disabled:
Signed-off-by: Ricardo Rivera-Matos rriveram@opensource.cirrus.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20231206160318.1255034-2-rriveram@opensource.cirru... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs35l45-i2c.c | 2 +- sound/soc/codecs/cs35l45-spi.c | 2 +- sound/soc/codecs/cs35l45.c | 9 ++++----- 3 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/cs35l45-i2c.c b/sound/soc/codecs/cs35l45-i2c.c index 77e0f8750f375..bc2af1ed0fe9b 100644 --- a/sound/soc/codecs/cs35l45-i2c.c +++ b/sound/soc/codecs/cs35l45-i2c.c @@ -62,7 +62,7 @@ static struct i2c_driver cs35l45_i2c_driver = { .driver = { .name = "cs35l45", .of_match_table = cs35l45_of_match, - .pm = &cs35l45_pm_ops, + .pm = pm_ptr(&cs35l45_pm_ops), }, .id_table = cs35l45_id_i2c, .probe = cs35l45_i2c_probe, diff --git a/sound/soc/codecs/cs35l45-spi.c b/sound/soc/codecs/cs35l45-spi.c index 5efb77530cc33..39e203a5f060c 100644 --- a/sound/soc/codecs/cs35l45-spi.c +++ b/sound/soc/codecs/cs35l45-spi.c @@ -64,7 +64,7 @@ static struct spi_driver cs35l45_spi_driver = { .driver = { .name = "cs35l45", .of_match_table = cs35l45_of_match, - .pm = &cs35l45_pm_ops, + .pm = pm_ptr(&cs35l45_pm_ops), }, .id_table = cs35l45_id_spi, .probe = cs35l45_spi_probe, diff --git a/sound/soc/codecs/cs35l45.c b/sound/soc/codecs/cs35l45.c index be4f4229576c4..b1d0f2c8f2cad 100644 --- a/sound/soc/codecs/cs35l45.c +++ b/sound/soc/codecs/cs35l45.c @@ -810,7 +810,7 @@ static int cs35l45_exit_hibernate(struct cs35l45_private *cs35l45) return -ETIMEDOUT; }
-static int __maybe_unused cs35l45_runtime_suspend(struct device *dev) +static int cs35l45_runtime_suspend(struct device *dev) { struct cs35l45_private *cs35l45 = dev_get_drvdata(dev);
@@ -827,7 +827,7 @@ static int __maybe_unused cs35l45_runtime_suspend(struct device *dev) return 0; }
-static int __maybe_unused cs35l45_runtime_resume(struct device *dev) +static int cs35l45_runtime_resume(struct device *dev) { struct cs35l45_private *cs35l45 = dev_get_drvdata(dev); int ret; @@ -1289,10 +1289,9 @@ void cs35l45_remove(struct cs35l45_private *cs35l45) } EXPORT_SYMBOL_NS_GPL(cs35l45_remove, SND_SOC_CS35L45);
-const struct dev_pm_ops cs35l45_pm_ops = { - SET_RUNTIME_PM_OPS(cs35l45_runtime_suspend, cs35l45_runtime_resume, NULL) +EXPORT_GPL_DEV_PM_OPS(cs35l45_pm_ops) = { + RUNTIME_PM_OPS(cs35l45_runtime_suspend, cs35l45_runtime_resume, NULL) }; -EXPORT_SYMBOL_NS_GPL(cs35l45_pm_ops, SND_SOC_CS35L45);
MODULE_DESCRIPTION("ASoC CS35L45 driver"); MODULE_AUTHOR("James Schulman, Cirrus Logic Inc, james.schulman@cirrus.com");
From: Ricardo Rivera-Matos rriveram@opensource.cirrus.com
[ Upstream commit c3c8b088949b9ccb88da2f84d3c3cc06580a6a43 ]
Use the SYSTEM_SLEEP_PM_OPS handlers to prevent handling an IRQ when the system is in the middle of suspending or resuming.
Signed-off-by: Ricardo Rivera-Matos rriveram@opensource.cirrus.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20231206160318.1255034-3-rriveram@opensource.cirru... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs35l45.c | 43 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
diff --git a/sound/soc/codecs/cs35l45.c b/sound/soc/codecs/cs35l45.c index b1d0f2c8f2cad..310747b7689d3 100644 --- a/sound/soc/codecs/cs35l45.c +++ b/sound/soc/codecs/cs35l45.c @@ -854,6 +854,46 @@ static int cs35l45_runtime_resume(struct device *dev) return ret; }
+static int cs35l45_sys_suspend(struct device *dev) +{ + struct cs35l45_private *cs35l45 = dev_get_drvdata(dev); + + dev_dbg(cs35l45->dev, "System suspend, disabling IRQ\n"); + disable_irq(cs35l45->irq); + + return 0; +} + +static int cs35l45_sys_suspend_noirq(struct device *dev) +{ + struct cs35l45_private *cs35l45 = dev_get_drvdata(dev); + + dev_dbg(cs35l45->dev, "Late system suspend, reenabling IRQ\n"); + enable_irq(cs35l45->irq); + + return 0; +} + +static int cs35l45_sys_resume_noirq(struct device *dev) +{ + struct cs35l45_private *cs35l45 = dev_get_drvdata(dev); + + dev_dbg(cs35l45->dev, "Early system resume, disabling IRQ\n"); + disable_irq(cs35l45->irq); + + return 0; +} + +static int cs35l45_sys_resume(struct device *dev) +{ + struct cs35l45_private *cs35l45 = dev_get_drvdata(dev); + + dev_dbg(cs35l45->dev, "System resume, reenabling IRQ\n"); + enable_irq(cs35l45->irq); + + return 0; +} + static int cs35l45_apply_property_config(struct cs35l45_private *cs35l45) { struct device_node *node = cs35l45->dev->of_node; @@ -1291,6 +1331,9 @@ EXPORT_SYMBOL_NS_GPL(cs35l45_remove, SND_SOC_CS35L45);
EXPORT_GPL_DEV_PM_OPS(cs35l45_pm_ops) = { RUNTIME_PM_OPS(cs35l45_runtime_suspend, cs35l45_runtime_resume, NULL) + + SYSTEM_SLEEP_PM_OPS(cs35l45_sys_suspend, cs35l45_sys_resume) + NOIRQ_SYSTEM_SLEEP_PM_OPS(cs35l45_sys_suspend_noirq, cs35l45_sys_resume_noirq) };
MODULE_DESCRIPTION("ASoC CS35L45 driver");
From: Ricardo Rivera-Matos rriveram@opensource.cirrus.com
[ Upstream commit a0ffa8115e1ea9786b03edc3f431d2f4ef3e7a2e ]
Masks the "DSP Virtual Mailbox 2 write" interrupt when before issuing the hibernate command to the DSP. The interrupt is unmasked when exiting runtime suspend as it is required for DSP operation.
Without this change the DSP fires an interrupt when hibernating causing the system spin between runtime suspend and runtime resume.
Signed-off-by: Ricardo Rivera-Matos rriveram@opensource.cirrus.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20231206160318.1255034-4-rriveram@opensource.cirru... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs35l45.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/sound/soc/codecs/cs35l45.c b/sound/soc/codecs/cs35l45.c index 310747b7689d3..9b9fc2d491089 100644 --- a/sound/soc/codecs/cs35l45.c +++ b/sound/soc/codecs/cs35l45.c @@ -775,6 +775,8 @@ static int cs35l45_enter_hibernate(struct cs35l45_private *cs35l45)
cs35l45_setup_hibernate(cs35l45);
+ regmap_set_bits(cs35l45->regmap, CS35L45_IRQ1_MASK_2, CS35L45_DSP_VIRT2_MBOX_MASK); + // Don't wait for ACK since bus activity would wake the device regmap_write(cs35l45->regmap, CS35L45_DSP_VIRT1_MBOX_1, CSPL_MBOX_CMD_HIBERNATE);
@@ -795,6 +797,8 @@ static int cs35l45_exit_hibernate(struct cs35l45_private *cs35l45) CSPL_MBOX_CMD_OUT_OF_HIBERNATE); if (!ret) { dev_dbg(cs35l45->dev, "Wake success at cycle: %d\n", j); + regmap_clear_bits(cs35l45->regmap, CS35L45_IRQ1_MASK_2, + CS35L45_DSP_VIRT2_MBOX_MASK); return 0; } usleep_range(100, 200);
From: Vineeth Vijayan vneethv@linux.ibm.com
[ Upstream commit b1a6a1a77f0666a5a6dc0893ab6ec8fcae46f24c ]
Fix virtual vs physical address confusion (which currently are the same).
Signed-off-by: Vineeth Vijayan vneethv@linux.ibm.com Reviewed-by: Peter Oberparleiter oberpar@linux.ibm.com Acked-by: Alexander Gordeev agordeev@linux.ibm.com Signed-off-by: Alexander Gordeev agordeev@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/block/scm_blk.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c index 3a9cc8a4a2302..ade95e91b3c8d 100644 --- a/drivers/s390/block/scm_blk.c +++ b/drivers/s390/block/scm_blk.c @@ -17,6 +17,7 @@ #include <linux/blk-mq.h> #include <linux/slab.h> #include <linux/list.h> +#include <linux/io.h> #include <asm/eadm.h> #include "scm_blk.h"
@@ -130,7 +131,7 @@ static void scm_request_done(struct scm_request *scmrq)
for (i = 0; i < nr_requests_per_io && scmrq->request[i]; i++) { msb = &scmrq->aob->msb[i]; - aidaw = msb->data_addr; + aidaw = (u64)phys_to_virt(msb->data_addr);
if ((msb->flags & MSB_FLAG_IDA) && aidaw && IS_ALIGNED(aidaw, PAGE_SIZE)) @@ -195,12 +196,12 @@ static int scm_request_prepare(struct scm_request *scmrq) msb->scm_addr = scmdev->address + ((u64) blk_rq_pos(req) << 9); msb->oc = (rq_data_dir(req) == READ) ? MSB_OC_READ : MSB_OC_WRITE; msb->flags |= MSB_FLAG_IDA; - msb->data_addr = (u64) aidaw; + msb->data_addr = (u64)virt_to_phys(aidaw);
rq_for_each_segment(bv, req, iter) { WARN_ON(bv.bv_offset); msb->blk_count += bv.bv_len >> 12; - aidaw->data_addr = (u64) page_address(bv.bv_page); + aidaw->data_addr = virt_to_phys(page_address(bv.bv_page)); aidaw++; }
From: Vineet Gupta vgupta@kernel.org
[ Upstream commit aca02d933f63ba8bc84258bf35f9ffaf6b664336 ]
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202312082320.VDN5A9hb-lkp@intel.com/ Signed-off-by: Vineet Gupta vgupta@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arc/kernel/signal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c index 0b3bb529d2463..8f6f4a5429646 100644 --- a/arch/arc/kernel/signal.c +++ b/arch/arc/kernel/signal.c @@ -62,7 +62,7 @@ struct rt_sigframe { unsigned int sigret_magic; };
-static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs) +static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs) { int err = 0; #ifndef CONFIG_ISA_ARCOMPACT @@ -75,12 +75,12 @@ static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs) #else v2abi.r58 = v2abi.r59 = 0; #endif - err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi)); + err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi)); #endif return err; }
-static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs) +static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs) { int err = 0; #ifndef CONFIG_ISA_ARCOMPACT
From: Vineet Gupta vgupta@kernel.org
[ Upstream commit 4eb69d00fe967699b9d93f7e74a990fe813e8d2b ]
Reported-by: kernel test robot lkp@intel.com Reported-by: Dan Carpenter error27@gmail.com Closes: https://lore.kernel.org/r/202311280906.VAIwEAfT-lkp@intel.com/ Signed-off-by: Vineet Gupta vgupta@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arc/kernel/setup.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 4dcf8589b708a..d08a5092c2b4d 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -153,7 +153,7 @@ static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len) { int n = 0; #ifdef CONFIG_ISA_ARCV2 - const char *release, *cpu_nm, *isa_nm = "ARCv2"; + const char *release = "", *cpu_nm = "HS38", *isa_nm = "ARCv2"; int dual_issue = 0, dual_enb = 0, mpy_opt, present; int bpu_full, bpu_cache, bpu_pred, bpu_ret_stk; char mpy_nm[16], lpb_nm[32]; @@ -172,8 +172,6 @@ static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len) * releases only update it. */
- cpu_nm = "HS38"; - if (info->arcver > 0x50 && info->arcver <= 0x53) { release = arc_hs_rel[info->arcver - 0x51].str; } else {
From: Avraham Stern avraham.stern@intel.com
[ Upstream commit ce038edfce43fb345f8dfdca0f7b17f535896701 ]
It possible that while the rx rb is being handled, the transport has been stopped and re-started. In this case the tx queue pointer is not yet initialized, which will lead to a NULL pointer dereference. Fix it.
Signed-off-by: Avraham Stern avraham.stern@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://msgid.link/20231207044813.cd0898cafd89.I0b84daae753ba9612092bf383f5c... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c index 4614acee9f7ba..586e1f860c169 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c @@ -1385,7 +1385,7 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans, * if it is true then one of the handlers took the page. */
- if (reclaim) { + if (reclaim && txq) { u16 sequence = le16_to_cpu(pkt->hdr.sequence); int index = SEQ_TO_INDEX(sequence); int cmd_index = iwl_txq_get_cmd_index(txq, index);
From: Luca Weiss luca@z3ntu.xyz
[ Upstream commit c3d1610345b79cbe29ef6ca04a4780eff0d360c7 ]
Add the VID and PID of Razer Wolverine V2 to xpad_device.
Signed-off-by: Luca Weiss luca@z3ntu.xyz Link: https://lore.kernel.org/r/20231125-razer-wolverine-v2-v1-1-979fe9f9288e@z3nt... Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/joystick/xpad.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index f5c21565bb3ce..e2c1848182de9 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -286,6 +286,7 @@ static const struct xpad_device { { 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE }, + { 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE }, { 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 }, { 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, { 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 },
From: Dan Williams dan.j.williams@intel.com
[ Upstream commit 134c6eaa6087d78c0e289931ca15ae7a5007670d ]
At present there are ~200 usages of device_lock() in the kernel. Some of those usages lead to "goto unlock;" patterns which have proven to be error prone. Define a "device" guard() definition to allow for those to be cleaned up and prevent new ones from appearing.
Link: http://lore.kernel.org/r/657897453dda8_269bd29492@dwillia2-mobl3.amr.corp.in... Link: http://lore.kernel.org/r/6577b0c2a02df_a04c5294bb@dwillia2-xfh.jf.intel.com.... Cc: Vishal Verma vishal.l.verma@intel.com Cc: Ira Weiny ira.weiny@intel.com Cc: Peter Zijlstra peterz@infradead.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Andrew Morton akpm@linux-foundation.org Signed-off-by: Dan Williams dan.j.williams@intel.com Reviewed-by: Ira Weiny ira.weiny@intel.com Reviewed-by: Dave Jiang dave.jiang@intel.com Reviewed-by: Vishal Verma vishal.l.verma@intel.com Link: https://lore.kernel.org/r/170250854466.1522182.17555361077409628655.stgit@dw... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/device.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/linux/device.h b/include/linux/device.h index 56d93a1ffb7b6..99496a0a5ddb3 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -1007,6 +1007,8 @@ static inline void device_unlock(struct device *dev) mutex_unlock(&dev->mutex); }
+DEFINE_GUARD(device, struct device *, device_lock(_T), device_unlock(_T)) + static inline void device_lock_assert(struct device *dev) { lockdep_assert_held(&dev->mutex);
From: Ghanshyam Agrawal ghanshyam1898@gmail.com
[ Upstream commit 13d605e32e4cfdedcecdf3d98d21710ffe887708 ]
A statement used %d print formatter where %s should have been used. The same has been fixed in this commit.
Signed-off-by: Ghanshyam Agrawal ghanshyam1898@gmail.com Link: 5aaf9efffc57 ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest") Link: https://lore.kernel.org/r/20231217080019.1063476-1-ghanshyam1898@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/alsa/mixer-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c index 21e482b23f502..23df154fcdd77 100644 --- a/tools/testing/selftests/alsa/mixer-test.c +++ b/tools/testing/selftests/alsa/mixer-test.c @@ -138,7 +138,7 @@ static void find_controls(void) err = snd_ctl_elem_info(card_data->handle, ctl_data->info); if (err < 0) { - ksft_print_msg("%s getting info for %d\n", + ksft_print_msg("%s getting info for %s\n", snd_strerror(err), ctl_data->name); }
From: Ryan McClelland rymcclel@gmail.com
[ Upstream commit 0b7dd38c1c520b650a889a81919838671b689eb9 ]
With gcc-7 builds, an error happens with the controller button values being defined as const. Change to a define.
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202312141227.C2h1IzfI-lkp@intel.com/
Signed-off-by: Ryan McClelland rymcclel@gmail.com Reviewed-by: Daniel J. Ogorchock djogorchock@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-nintendo.c | 44 +++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 10468f727e5bb..7644edee996a7 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -325,28 +325,28 @@ struct joycon_imu_cal { * All the controller's button values are stored in a u32. * They can be accessed with bitwise ANDs. */ -static const u32 JC_BTN_Y = BIT(0); -static const u32 JC_BTN_X = BIT(1); -static const u32 JC_BTN_B = BIT(2); -static const u32 JC_BTN_A = BIT(3); -static const u32 JC_BTN_SR_R = BIT(4); -static const u32 JC_BTN_SL_R = BIT(5); -static const u32 JC_BTN_R = BIT(6); -static const u32 JC_BTN_ZR = BIT(7); -static const u32 JC_BTN_MINUS = BIT(8); -static const u32 JC_BTN_PLUS = BIT(9); -static const u32 JC_BTN_RSTICK = BIT(10); -static const u32 JC_BTN_LSTICK = BIT(11); -static const u32 JC_BTN_HOME = BIT(12); -static const u32 JC_BTN_CAP = BIT(13); /* capture button */ -static const u32 JC_BTN_DOWN = BIT(16); -static const u32 JC_BTN_UP = BIT(17); -static const u32 JC_BTN_RIGHT = BIT(18); -static const u32 JC_BTN_LEFT = BIT(19); -static const u32 JC_BTN_SR_L = BIT(20); -static const u32 JC_BTN_SL_L = BIT(21); -static const u32 JC_BTN_L = BIT(22); -static const u32 JC_BTN_ZL = BIT(23); +#define JC_BTN_Y BIT(0) +#define JC_BTN_X BIT(1) +#define JC_BTN_B BIT(2) +#define JC_BTN_A BIT(3) +#define JC_BTN_SR_R BIT(4) +#define JC_BTN_SL_R BIT(5) +#define JC_BTN_R BIT(6) +#define JC_BTN_ZR BIT(7) +#define JC_BTN_MINUS BIT(8) +#define JC_BTN_PLUS BIT(9) +#define JC_BTN_RSTICK BIT(10) +#define JC_BTN_LSTICK BIT(11) +#define JC_BTN_HOME BIT(12) +#define JC_BTN_CAP BIT(13) /* capture button */ +#define JC_BTN_DOWN BIT(16) +#define JC_BTN_UP BIT(17) +#define JC_BTN_RIGHT BIT(18) +#define JC_BTN_LEFT BIT(19) +#define JC_BTN_SR_L BIT(20) +#define JC_BTN_SL_L BIT(21) +#define JC_BTN_L BIT(22) +#define JC_BTN_ZL BIT(23)
enum joycon_msg_type { JOYCON_MSG_TYPE_NONE,
From: Vishnu Sankar vishnuocv@gmail.com
[ Upstream commit 66e92e23a72761f5b53f970aeb1badc5fd92fc74 ]
Some ThinkPad systems ECFW use non-standard addresses for fan control and reporting. This patch adds support for such ECFW so that it can report the correct fan values. Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.
Suggested-by: Mark Pearson mpearson-lenovo@squebb.ca Signed-off-by: Vishnu Sankar vishnuocv@gmail.com Reviewed-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 98 ++++++++++++++++++++++++---- 1 file changed, 85 insertions(+), 13 deletions(-)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a46fc417cb200..d73cbae4aa218 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7948,8 +7948,19 @@ static struct ibm_struct volume_driver_data = { * TPACPI_FAN_WR_TPEC is also available and should be used to * command the fan. The X31/X40/X41 seems to have 8 fan levels, * but the ACPI tables just mention level 7. + * + * TPACPI_FAN_RD_TPEC_NS: + * This mode is used for a few ThinkPads (L13 Yoga Gen2, X13 Yoga Gen2 etc.) + * that are using non-standard EC locations for reporting fan speeds. + * Currently these platforms only provide fan rpm reporting. + * */
+#define FAN_RPM_CAL_CONST 491520 /* FAN RPM calculation offset for some non-standard ECFW */ + +#define FAN_NS_CTRL_STATUS BIT(2) /* Bit which determines control is enabled or not */ +#define FAN_NS_CTRL BIT(4) /* Bit which determines control is by host or EC */ + enum { /* Fan control constants */ fan_status_offset = 0x2f, /* EC register 0x2f */ fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) @@ -7957,6 +7968,11 @@ enum { /* Fan control constants */ fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M) bit 0 selects which fan is active */
+ fan_status_offset_ns = 0x93, /* Special status/control offset for non-standard EC Fan1 */ + fan2_status_offset_ns = 0x96, /* Special status/control offset for non-standard EC Fan2 */ + fan_rpm_status_ns = 0x95, /* Special offset for Fan1 RPM status for non-standard EC */ + fan2_rpm_status_ns = 0x98, /* Special offset for Fan2 RPM status for non-standard EC */ + TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */
@@ -7967,6 +7983,7 @@ enum fan_status_access_mode { TPACPI_FAN_NONE = 0, /* No fan status or control */ TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ + TPACPI_FAN_RD_TPEC_NS, /* Use non-standard ACPI EC regs (eg: L13 Yoga gen2 etc.) */ };
enum fan_control_access_mode { @@ -7994,6 +8011,8 @@ static u8 fan_control_desired_level; static u8 fan_control_resume_level; static int fan_watchdog_maxinterval;
+static bool fan_with_ns_addr; + static struct mutex fan_mutex;
static void fan_watchdog_fire(struct work_struct *ignored); @@ -8123,6 +8142,15 @@ static int fan_get_status(u8 *status) }
break; + case TPACPI_FAN_RD_TPEC_NS: + /* Default mode is AUTO which means controlled by EC */ + if (!acpi_ec_read(fan_status_offset_ns, &s)) + return -EIO; + + if (status) + *status = s; + + break;
default: return -ENXIO; @@ -8139,7 +8167,8 @@ static int fan_get_status_safe(u8 *status) if (mutex_lock_killable(&fan_mutex)) return -ERESTARTSYS; rc = fan_get_status(&s); - if (!rc) + /* NS EC doesn't have register with level settings */ + if (!rc && !fan_with_ns_addr) fan_update_desired_level(s); mutex_unlock(&fan_mutex);
@@ -8166,7 +8195,13 @@ static int fan_get_speed(unsigned int *speed)
if (likely(speed)) *speed = (hi << 8) | lo; + break; + case TPACPI_FAN_RD_TPEC_NS: + if (!acpi_ec_read(fan_rpm_status_ns, &lo)) + return -EIO;
+ if (speed) + *speed = lo ? FAN_RPM_CAL_CONST / lo : 0; break;
default: @@ -8178,7 +8213,7 @@ static int fan_get_speed(unsigned int *speed)
static int fan2_get_speed(unsigned int *speed) { - u8 hi, lo; + u8 hi, lo, status; bool rc;
switch (fan_status_access_mode) { @@ -8194,7 +8229,21 @@ static int fan2_get_speed(unsigned int *speed)
if (likely(speed)) *speed = (hi << 8) | lo; + break;
+ case TPACPI_FAN_RD_TPEC_NS: + rc = !acpi_ec_read(fan2_status_offset_ns, &status); + if (rc) + return -EIO; + if (!(status & FAN_NS_CTRL_STATUS)) { + pr_info("secondary fan control not supported\n"); + return -EIO; + } + rc = !acpi_ec_read(fan2_rpm_status_ns, &lo); + if (rc) + return -EIO; + if (speed) + *speed = lo ? FAN_RPM_CAL_CONST / lo : 0; break;
default: @@ -8697,6 +8746,7 @@ static const struct attribute_group fan_driver_attr_group = { #define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */ #define TPACPI_FAN_2CTL 0x0004 /* selects fan2 control */ #define TPACPI_FAN_NOFAN 0x0008 /* no fan available */ +#define TPACPI_FAN_NS 0x0010 /* For EC with non-Standard register addresses */
static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1), @@ -8715,6 +8765,8 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (2nd gen) */ TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL), /* P15 (1st gen) / P15v (1st gen) */ TPACPI_Q_LNV3('N', '3', '7', TPACPI_FAN_2CTL), /* T15g (2nd gen) */ + TPACPI_Q_LNV3('R', '1', 'F', TPACPI_FAN_NS), /* L13 Yoga Gen 2 */ + TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS), /* X13 Yoga Gen 2*/ TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN), /* X1 Tablet (2nd gen) */ };
@@ -8749,18 +8801,27 @@ static int __init fan_init(struct ibm_init_struct *iibm) return -ENODEV; }
+ if (quirks & TPACPI_FAN_NS) { + pr_info("ECFW with non-standard fan reg control found\n"); + fan_with_ns_addr = 1; + /* Fan ctrl support from host is undefined for now */ + tp_features.fan_ctrl_status_undef = 1; + } + if (gfan_handle) { /* 570, 600e/x, 770e, 770x */ fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN; } else { /* all other ThinkPads: note that even old-style * ThinkPad ECs supports the fan control register */ - if (likely(acpi_ec_read(fan_status_offset, - &fan_control_initial_status))) { + if (fan_with_ns_addr || + likely(acpi_ec_read(fan_status_offset, &fan_control_initial_status))) { int res; unsigned int speed;
- fan_status_access_mode = TPACPI_FAN_RD_TPEC; + fan_status_access_mode = fan_with_ns_addr ? + TPACPI_FAN_RD_TPEC_NS : TPACPI_FAN_RD_TPEC; + if (quirks & TPACPI_FAN_Q1) fan_quirk1_setup(); /* Try and probe the 2nd fan */ @@ -8769,7 +8830,8 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (res >= 0 && speed != FAN_NOT_PRESENT) { /* It responded - so let's assume it's there */ tp_features.second_fan = 1; - tp_features.second_fan_ctl = 1; + /* fan control not currently available for ns ECFW */ + tp_features.second_fan_ctl = !fan_with_ns_addr; pr_info("secondary fan control detected & enabled\n"); } else { /* Fan not auto-detected */ @@ -8944,6 +9006,7 @@ static int fan_read(struct seq_file *m) str_enabled_disabled(status), status); break;
+ case TPACPI_FAN_RD_TPEC_NS: case TPACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ rc = fan_get_status_safe(&status); @@ -8958,13 +9021,22 @@ static int fan_read(struct seq_file *m)
seq_printf(m, "speed:\t\t%d\n", speed);
- if (status & TP_EC_FAN_FULLSPEED) - /* Disengaged mode takes precedence */ - seq_printf(m, "level:\t\tdisengaged\n"); - else if (status & TP_EC_FAN_AUTO) - seq_printf(m, "level:\t\tauto\n"); - else - seq_printf(m, "level:\t\t%d\n", status); + if (fan_status_access_mode == TPACPI_FAN_RD_TPEC_NS) { + /* + * No full speed bit in NS EC + * EC Auto mode is set by default. + * No other levels settings available + */ + seq_printf(m, "level:\t\t%s\n", status & FAN_NS_CTRL ? "unknown" : "auto"); + } else { + if (status & TP_EC_FAN_FULLSPEED) + /* Disengaged mode takes precedence */ + seq_printf(m, "level:\t\tdisengaged\n"); + else if (status & TP_EC_FAN_AUTO) + seq_printf(m, "level:\t\tauto\n"); + else + seq_printf(m, "level:\t\t%d\n", status); + } break;
case TPACPI_FAN_NONE:
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit 85980669a863514dd47761efd6c1bc4677a2ae08 ]
The platform defines will be used by the quirks in the future, so move them to the common header to allow use by both source files.
Signed-off-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20231212045006.97581-2-mario.limonciello@amd.com Reviewed-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/amd/pmc/pmc.c | 10 ---------- drivers/platform/x86/amd/pmc/pmc.h | 11 +++++++++++ 2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c index 212f164bc3dba..3fea32880ac8d 100644 --- a/drivers/platform/x86/amd/pmc/pmc.c +++ b/drivers/platform/x86/amd/pmc/pmc.c @@ -87,16 +87,6 @@ #define SMU_MSG_LOG_RESET 0x07 #define SMU_MSG_LOG_DUMP_DATA 0x08 #define SMU_MSG_GET_SUP_CONSTRAINTS 0x09 -/* List of supported CPU ids */ -#define AMD_CPU_ID_RV 0x15D0 -#define AMD_CPU_ID_RN 0x1630 -#define AMD_CPU_ID_PCO AMD_CPU_ID_RV -#define AMD_CPU_ID_CZN AMD_CPU_ID_RN -#define AMD_CPU_ID_YC 0x14B5 -#define AMD_CPU_ID_CB 0x14D8 -#define AMD_CPU_ID_PS 0x14E8 -#define AMD_CPU_ID_SP 0x14A4 -#define PCI_DEVICE_ID_AMD_1AH_M20H_ROOT 0x1507
#define PMC_MSG_DELAY_MIN_US 50 #define RESPONSE_REGISTER_LOOP_MAX 20000 diff --git a/drivers/platform/x86/amd/pmc/pmc.h b/drivers/platform/x86/amd/pmc/pmc.h index c27bd6a5642f4..a85c235247d38 100644 --- a/drivers/platform/x86/amd/pmc/pmc.h +++ b/drivers/platform/x86/amd/pmc/pmc.h @@ -41,4 +41,15 @@ struct amd_pmc_dev { void amd_pmc_process_restore_quirks(struct amd_pmc_dev *dev); void amd_pmc_quirks_init(struct amd_pmc_dev *dev);
+/* List of supported CPU ids */ +#define AMD_CPU_ID_RV 0x15D0 +#define AMD_CPU_ID_RN 0x1630 +#define AMD_CPU_ID_PCO AMD_CPU_ID_RV +#define AMD_CPU_ID_CZN AMD_CPU_ID_RN +#define AMD_CPU_ID_YC 0x14B5 +#define AMD_CPU_ID_CB 0x14D8 +#define AMD_CPU_ID_PS 0x14E8 +#define AMD_CPU_ID_SP 0x14A4 +#define PCI_DEVICE_ID_AMD_1AH_M20H_ROOT 0x1507 + #endif /* PMC_H */
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit 2d53c0ab61e62302d7b62d660fe76de2bff6bf45 ]
amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but may be extended to other platforms in the future. Rename the function and only check platform firmware version when it's called for a Cezanne based platform.
Signed-off-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20231212045006.97581-3-mario.limonciello@amd.com Reviewed-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/amd/pmc/pmc.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c index 3fea32880ac8d..f28bee6854f4c 100644 --- a/drivers/platform/x86/amd/pmc/pmc.c +++ b/drivers/platform/x86/amd/pmc/pmc.c @@ -704,19 +704,22 @@ static int amd_pmc_get_os_hint(struct amd_pmc_dev *dev) return -EINVAL; }
-static int amd_pmc_czn_wa_irq1(struct amd_pmc_dev *pdev) +static int amd_pmc_wa_irq1(struct amd_pmc_dev *pdev) { struct device *d; int rc;
- if (!pdev->major) { - rc = amd_pmc_get_smu_version(pdev); - if (rc) - return rc; - } + /* cezanne platform firmware has a fix in 64.66.0 */ + if (pdev->cpu_id == AMD_CPU_ID_CZN) { + if (!pdev->major) { + rc = amd_pmc_get_smu_version(pdev); + if (rc) + return rc; + }
- if (pdev->major > 64 || (pdev->major == 64 && pdev->minor > 65)) - return 0; + if (pdev->major > 64 || (pdev->major == 64 && pdev->minor > 65)) + return 0; + }
d = bus_find_device_by_name(&serio_bus, NULL, "serio0"); if (!d) @@ -876,7 +879,7 @@ static int amd_pmc_suspend_handler(struct device *dev) struct amd_pmc_dev *pdev = dev_get_drvdata(dev);
if (pdev->cpu_id == AMD_CPU_ID_CZN && !disable_workarounds) { - int rc = amd_pmc_czn_wa_irq1(pdev); + int rc = amd_pmc_wa_irq1(pdev);
if (rc) { dev_err(pdev->dev, "failed to adjust keyboard wakeup: %d\n", rc);
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit b614a4bd73efeddc2b20d9e6deb6c2710373802b ]
Other platforms may need to disable keyboard wakeup besides Cezanne, so move the detection into amd_pmc_quirks_init() where it may be applied to multiple platforms.
Signed-off-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20231212045006.97581-4-mario.limonciello@amd.com Reviewed-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/amd/pmc/pmc-quirks.c | 3 +++ drivers/platform/x86/amd/pmc/pmc.c | 2 +- drivers/platform/x86/amd/pmc/pmc.h | 1 + 3 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/amd/pmc/pmc-quirks.c b/drivers/platform/x86/amd/pmc/pmc-quirks.c index 6bbffb081053e..c32046dfa960e 100644 --- a/drivers/platform/x86/amd/pmc/pmc-quirks.c +++ b/drivers/platform/x86/amd/pmc/pmc-quirks.c @@ -235,6 +235,9 @@ void amd_pmc_quirks_init(struct amd_pmc_dev *dev) { const struct dmi_system_id *dmi_id;
+ if (dev->cpu_id == AMD_CPU_ID_CZN) + dev->disable_8042_wakeup = true; + dmi_id = dmi_first_match(fwbug_list); if (!dmi_id) return; diff --git a/drivers/platform/x86/amd/pmc/pmc.c b/drivers/platform/x86/amd/pmc/pmc.c index f28bee6854f4c..96caf2221d877 100644 --- a/drivers/platform/x86/amd/pmc/pmc.c +++ b/drivers/platform/x86/amd/pmc/pmc.c @@ -878,7 +878,7 @@ static int amd_pmc_suspend_handler(struct device *dev) { struct amd_pmc_dev *pdev = dev_get_drvdata(dev);
- if (pdev->cpu_id == AMD_CPU_ID_CZN && !disable_workarounds) { + if (pdev->disable_8042_wakeup && !disable_workarounds) { int rc = amd_pmc_wa_irq1(pdev);
if (rc) { diff --git a/drivers/platform/x86/amd/pmc/pmc.h b/drivers/platform/x86/amd/pmc/pmc.h index a85c235247d38..b4794f118739f 100644 --- a/drivers/platform/x86/amd/pmc/pmc.h +++ b/drivers/platform/x86/amd/pmc/pmc.h @@ -36,6 +36,7 @@ struct amd_pmc_dev { struct mutex lock; /* generic mutex lock */ struct dentry *dbgfs_dir; struct quirk_entry *quirks; + bool disable_8042_wakeup; };
void amd_pmc_process_restore_quirks(struct amd_pmc_dev *dev);
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit a55bdad5dfd1efd4ed9ffe518897a21ca8e4e193 ]
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround included in the EC firmware that will cause the EC to emit a "spurious" keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on resume.
``` atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0). atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known. atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0). atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known. ```
In some user flows this is harmless, but if a user has specifically suspended the laptop and then closed the lid it will cause the laptop to wakeup. The laptop wakes up because the ACPI SCI triggers when the lid is closed and when the kernel sees that IRQ1 is "also" active. The kernel can't distinguish from a real keyboard keypress and wakes the system.
Add the model into the list of quirks to disable keyboard wakeup source. This is intentionally only matching the production BIOS version in hopes that a newer EC firmware included in a newer BIOS can avoid this behavior.
Cc: Kieran Levin ktl@framework.net Link: https://github.com/FrameworkComputer/EmbeddedController/blob/lotus-zephyr/ze... [1] Link: https://community.frame.work/t/amd-wont-sleep-properly/41755 Link: https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-... Signed-off-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20231212045006.97581-5-mario.limonciello@amd.com Reviewed-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/amd/pmc/pmc-quirks.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/platform/x86/amd/pmc/pmc-quirks.c b/drivers/platform/x86/amd/pmc/pmc-quirks.c index c32046dfa960e..b456370166b6b 100644 --- a/drivers/platform/x86/amd/pmc/pmc-quirks.c +++ b/drivers/platform/x86/amd/pmc/pmc-quirks.c @@ -16,12 +16,17 @@
struct quirk_entry { u32 s2idle_bug_mmio; + bool spurious_8042; };
static struct quirk_entry quirk_s2idle_bug = { .s2idle_bug_mmio = 0xfed80380, };
+static struct quirk_entry quirk_spurious_8042 = { + .spurious_8042 = true, +}; + static const struct dmi_system_id fwbug_list[] = { { .ident = "L14 Gen2 AMD", @@ -193,6 +198,16 @@ static const struct dmi_system_id fwbug_list[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Laptop 15s-eq2xxx"), } }, + /* https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-... */ + { + .ident = "Framework Laptop 13 (Phoenix)", + .driver_data = &quirk_spurious_8042, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Framework"), + DMI_MATCH(DMI_PRODUCT_NAME, "Laptop 13 (AMD Ryzen 7040Series)"), + DMI_MATCH(DMI_BIOS_VERSION, "03.03"), + } + }, {} };
@@ -245,4 +260,6 @@ void amd_pmc_quirks_init(struct amd_pmc_dev *dev) if (dev->quirks->s2idle_bug_mmio) pr_info("Using s2idle quirk to avoid %s platform firmware bug\n", dmi_id->ident); + if (dev->quirks->spurious_8042) + dev->disable_8042_wakeup = true; }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 99c7bb44f5749373bc01b73af02b50b69bcbf43d ]
Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which is the default for BYTCR devices.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://msgid.link/r/20231217213221.49424-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 630784b6cb6d3..f184d23deaa0f 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -894,6 +894,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + /* Medion Lifetab S10346 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are much too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* Mele PCG03 Mini PC */ .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Mini PC"),
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit b1b6131bca35a55a69fadc39d51577968fa2ee97 ]
Some BYTCR x86 tablets with a rt5640 codec have the left and right channels of their speakers swapped.
Add a new BYT_RT5640_SWAPPED_SPEAKERS quirk for this which sets cfg-spk:swapped in the components string to let userspace know about the swapping so that the UCM profile can configure the mixer to correct this.
Enable this new quirk on the Medion Lifetab S10346 which has its speakers swapped.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://msgid.link/r/20231217213221.49424-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index f184d23deaa0f..6b631a608ae8f 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -83,6 +83,7 @@ enum { #define BYT_RT5640_HSMIC2_ON_IN1 BIT(27) #define BYT_RT5640_JD_HP_ELITEP_1000G2 BIT(28) #define BYT_RT5640_USE_AMCR0F28 BIT(29) +#define BYT_RT5640_SWAPPED_SPEAKERS BIT(30)
#define BYTCR_INPUT_DEFAULTS \ (BYT_RT5640_IN3_MAP | \ @@ -157,6 +158,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk MONO_SPEAKER enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) dev_info(dev, "quirk NO_SPEAKERS enabled\n"); + if (byt_rt5640_quirk & BYT_RT5640_SWAPPED_SPEAKERS) + dev_info(dev, "quirk SWAPPED_SPEAKERS enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_LINEOUT) dev_info(dev, "quirk LINEOUT enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_LINEOUT_AS_HP2) @@ -903,6 +906,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"), }, .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_SWAPPED_SPEAKERS | BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, @@ -1631,11 +1635,11 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) const char *platform_name; struct acpi_device *adev; struct device *codec_dev; + const char *cfg_spk; bool sof_parent; int ret_val = 0; int dai_index = 0; - int i, cfg_spk; - int aif; + int i, aif;
is_bytcr = false; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); @@ -1795,13 +1799,16 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) }
if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) { - cfg_spk = 0; + cfg_spk = "0"; spk_type = "none"; } else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) { - cfg_spk = 1; + cfg_spk = "1"; spk_type = "mono"; + } else if (byt_rt5640_quirk & BYT_RT5640_SWAPPED_SPEAKERS) { + cfg_spk = "swapped"; + spk_type = "swapped"; } else { - cfg_spk = 2; + cfg_spk = "2"; spk_type = "stereo"; }
@@ -1816,7 +1823,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) headset2_string = " cfg-hs2:in1";
snprintf(byt_rt5640_components, sizeof(byt_rt5640_components), - "cfg-spk:%d cfg-mic:%s aif:%d%s%s", cfg_spk, + "cfg-spk:%s cfg-mic:%s aif:%d%s%s", cfg_spk, map_name[BYT_RT5640_MAP(byt_rt5640_quirk)], aif, lineout_string, headset2_string); byt_rt5640_card.components = byt_rt5640_components;
From: Stefan Binding sbinding@opensource.cirrus.com
[ Upstream commit 51d976079976c800ef19ed1b542602fcf63f0edb ]
These models use 2xCS35L41amps with HDA using SPI and I2C. Models use internal and external boost. All models require DSD support to be added inside cs35l41_hda_property.c
Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com Link: https://lore.kernel.org/r/20231218151221.388745-6-sbinding@opensource.cirrus... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2590879f0a84b..7706f7dbd8bbb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9903,17 +9903,20 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1d1f, "ASUS ROG Strix G17 2023 (G713PV)", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), + SND_PCI_QUIRK(0x1043, 0x1da2, "ASUS UP6502ZA/ZD", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1e02, "ASUS UX3402ZA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS UX3402VA", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1f62, "ASUS UX7602ZM", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), - SND_PCI_QUIRK(0x1043, 0x1e12, "ASUS UM3402", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x1043, 0x1e12, "ASUS UM6702RA/RC", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1ee2, "ASUS UM3402", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x1043, 0x1c52, "ASUS Zephyrus G15 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f12, "ASUS UM5302", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x1043, 0x1f62, "ASUS UX7602ZM", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1f92, "ASUS ROG Flow X16", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x3a20, "ASUS G614JZR", ALC245_FIXUP_CS35L41_SPI_2),
From: Mike Snitzer snitzer@kernel.org
[ Upstream commit 6849302fdff126997765d16df355b73231f130d4 ]
Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 2a8b081bce7dd..3ff87cb4dc494 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -660,6 +660,7 @@ config DM_ZONED
config DM_AUDIT bool "DM audit events" + depends on BLK_DEV_DM depends on AUDIT help Generate audit events for device-mapper.
From: "Guilherme G. Piccoli" gpiccoli@igalia.com
[ Upstream commit 6eb04ca8c52e3f8c8ea7102ade81d642eee87f4a ]
It was reported [0] that adding a generic joycon to the system caused a kernel crash on Steam Deck, with the below panic spew:
divide error: 0000 [#1] PREEMPT SMP NOPTI [...] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0119 10/24/2023 RIP: 0010:nintendo_hid_event+0x340/0xcc1 [hid_nintendo] [...] Call Trace: [...] ? exc_divide_error+0x38/0x50 ? nintendo_hid_event+0x340/0xcc1 [hid_nintendo] ? asm_exc_divide_error+0x1a/0x20 ? nintendo_hid_event+0x307/0xcc1 [hid_nintendo] hid_input_report+0x143/0x160 hidp_session_run+0x1ce/0x700 [hidp]
Since it's a divide-by-0 error, by tracking the code for potential denominator issues, we've spotted 2 places in which this could happen; so let's guard against the possibility and log in the kernel if the condition happens. This is specially useful since some data that fills some denominators are read from the joycon HW in some cases, increasing the potential for flaws.
[0] https://github.com/ValveSoftware/SteamOS/issues/1070
Signed-off-by: Guilherme G. Piccoli gpiccoli@igalia.com Tested-by: Sam Lantinga slouken@libsdl.org Signed-off-by: Jiri Kosina jkosina@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-nintendo.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index 7644edee996a7..4850e915a57d4 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -896,14 +896,27 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr) */ static void joycon_calc_imu_cal_divisors(struct joycon_ctlr *ctlr) { - int i; + int i, divz = 0;
for (i = 0; i < 3; i++) { ctlr->imu_cal_accel_divisor[i] = ctlr->accel_cal.scale[i] - ctlr->accel_cal.offset[i]; ctlr->imu_cal_gyro_divisor[i] = ctlr->gyro_cal.scale[i] - ctlr->gyro_cal.offset[i]; + + if (ctlr->imu_cal_accel_divisor[i] == 0) { + ctlr->imu_cal_accel_divisor[i] = 1; + divz++; + } + + if (ctlr->imu_cal_gyro_divisor[i] == 0) { + ctlr->imu_cal_gyro_divisor[i] = 1; + divz++; + } } + + if (divz) + hid_warn(ctlr->hdev, "inaccurate IMU divisors (%d)\n", divz); }
static const s16 DFLT_ACCEL_OFFSET /*= 0*/; @@ -1132,16 +1145,16 @@ static void joycon_parse_imu_report(struct joycon_ctlr *ctlr, JC_IMU_SAMPLES_PER_DELTA_AVG) { ctlr->imu_avg_delta_ms = ctlr->imu_delta_samples_sum / ctlr->imu_delta_samples_count; - /* don't ever want divide by zero shenanigans */ - if (ctlr->imu_avg_delta_ms == 0) { - ctlr->imu_avg_delta_ms = 1; - hid_warn(ctlr->hdev, - "calculated avg imu delta of 0\n"); - } ctlr->imu_delta_samples_count = 0; ctlr->imu_delta_samples_sum = 0; }
+ /* don't ever want divide by zero shenanigans */ + if (ctlr->imu_avg_delta_ms == 0) { + ctlr->imu_avg_delta_ms = 1; + hid_warn(ctlr->hdev, "calculated avg imu delta of 0\n"); + } + /* useful for debugging IMU sample rate */ hid_dbg(ctlr->hdev, "imu_report: ms=%u last_ms=%u delta=%u avg_delta=%u\n",
From: Paulo Alcantara pc@manguebit.com
[ Upstream commit 567320c46a60a3c39b69aa1df802d753817a3f86 ]
Validate SMB message with ->check_message() before calling ->calc_smb_size().
This fixes CVE-2023-6610.
Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218219 Cc; stable@vger.kernel.org Signed-off-by: Paulo Alcantara pc@manguebit.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/smb2misc.c | 30 +++++++++++++++--------------- fs/smb/client/smb2ops.c | 6 ++++-- 2 files changed, 19 insertions(+), 17 deletions(-)
diff --git a/fs/smb/client/smb2misc.c b/fs/smb/client/smb2misc.c index e20b4354e703b..82b84a4941dd2 100644 --- a/fs/smb/client/smb2misc.c +++ b/fs/smb/client/smb2misc.c @@ -173,6 +173,21 @@ smb2_check_message(char *buf, unsigned int len, struct TCP_Server_Info *server) }
mid = le64_to_cpu(shdr->MessageId); + if (check_smb2_hdr(shdr, mid)) + return 1; + + if (shdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) { + cifs_dbg(VFS, "Invalid structure size %u\n", + le16_to_cpu(shdr->StructureSize)); + return 1; + } + + command = le16_to_cpu(shdr->Command); + if (command >= NUMBER_OF_SMB2_COMMANDS) { + cifs_dbg(VFS, "Invalid SMB2 command %d\n", command); + return 1; + } + if (len < pdu_size) { if ((len >= hdr_size) && (shdr->Status != 0)) { @@ -193,21 +208,6 @@ smb2_check_message(char *buf, unsigned int len, struct TCP_Server_Info *server) return 1; }
- if (check_smb2_hdr(shdr, mid)) - return 1; - - if (shdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) { - cifs_dbg(VFS, "Invalid structure size %u\n", - le16_to_cpu(shdr->StructureSize)); - return 1; - } - - command = le16_to_cpu(shdr->Command); - if (command >= NUMBER_OF_SMB2_COMMANDS) { - cifs_dbg(VFS, "Invalid SMB2 command %d\n", command); - return 1; - } - if (smb2_rsp_struct_sizes[command] != pdu->StructureSize2) { if (command != SMB2_OPLOCK_BREAK_HE && (shdr->Status == 0 || pdu->StructureSize2 != SMB2_ERROR_STRUCTURE_SIZE2_LE)) { diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index dbcfdf7bc2704..610783bf52422 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -403,8 +403,10 @@ smb2_dump_detail(void *buf, struct TCP_Server_Info *server) cifs_server_dbg(VFS, "Cmd: %d Err: 0x%x Flags: 0x%x Mid: %llu Pid: %d\n", shdr->Command, shdr->Status, shdr->Flags, shdr->MessageId, shdr->Id.SyncId.ProcessId); - cifs_server_dbg(VFS, "smb buf %p len %u\n", buf, - server->ops->calc_smb_size(buf)); + if (!server->ops->check_message(buf, server->total_read, server)) { + cifs_server_dbg(VFS, "smb buf %p len %u\n", buf, + server->ops->calc_smb_size(buf)); + } #endif }
From: Keith Busch kbusch@kernel.org
[ Upstream commit d3e8b1858734bf46cda495be4165787b9a3981a6 ]
The commit was identified to might sleep in invalid context and is blocking regression testing.
This reverts commit ee6fdc5055e916b1dd497f11260d4901c4c1e55e.
Link: https://lore.kernel.org/linux-nvme/hkhl56n665uvc6t5d6h3wtx7utkcorw4xlwi7d2t2... Link: https://lists.infradead.org/pipermail/linux-nvme/2023-December/043756.html Reported-by: Daniel Wagner dwagner@suse.de Reported-by: Maurizio Lombardi mlombard@redhat.com Cc: Michael Liang mliang@purestorage.com Tested-by: Daniel Wagner dwagner@suse.de Reviewed-by: Daniel Wagner dwagner@suse.de Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fc.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index a15b37750d6e9..206f1b4e5eb1c 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2548,24 +2548,17 @@ nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg) * the controller. Abort any ios on the association and let the * create_association error path resolve things. */ - enum nvme_ctrl_state state; - unsigned long flags; - - spin_lock_irqsave(&ctrl->lock, flags); - state = ctrl->ctrl.state; - if (state == NVME_CTRL_CONNECTING) { - set_bit(ASSOC_FAILED, &ctrl->flags); - spin_unlock_irqrestore(&ctrl->lock, flags); + if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) { __nvme_fc_abort_outstanding_ios(ctrl, true); + set_bit(ASSOC_FAILED, &ctrl->flags); dev_warn(ctrl->ctrl.device, "NVME-FC{%d}: transport error during (re)connect\n", ctrl->cnum); return; } - spin_unlock_irqrestore(&ctrl->lock, flags);
/* Otherwise, only proceed if in LIVE state - e.g. on first error */ - if (state != NVME_CTRL_LIVE) + if (ctrl->ctrl.state != NVME_CTRL_LIVE) return;
dev_warn(ctrl->ctrl.device, @@ -3179,16 +3172,12 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) else ret = nvme_fc_recreate_io_queues(ctrl); } - - spin_lock_irqsave(&ctrl->lock, flags); if (!ret && test_bit(ASSOC_FAILED, &ctrl->flags)) ret = -EIO; - if (ret) { - spin_unlock_irqrestore(&ctrl->lock, flags); + if (ret) goto out_term_aen_ops; - } + changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE); - spin_unlock_irqrestore(&ctrl->lock, flags);
ctrl->ctrl.nr_reconnects = 0;
From: Jensen Huang jensenhuang@friendlyarm.com
[ Upstream commit 19cde9c92b8d3b7ee555d0da3bcb0232d3a784f4 ]
Possible deadlock scenario (on reboot): rk3x_i2c_xfer_common(polling) -> rk3x_i2c_wait_xfer_poll() -> rk3x_i2c_irq(0, i2c); --> spin_lock(&i2c->lock); ... <rk3x i2c interrupt> -> rk3x_i2c_irq(0, i2c); --> spin_lock(&i2c->lock); (deadlock here)
Store the IRQ number and disable/enable it around the polling transfer. This patch has been tested on NanoPC-T4.
Signed-off-by: Jensen Huang jensenhuang@friendlyarm.com Reviewed-by: Heiko Stuebner heiko@sntech.de Reviewed-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-rk3x.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index a044ca0c35a19..4362db7c57892 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -178,6 +178,7 @@ struct rk3x_i2c_soc_data { * @clk: function clk for rk3399 or function & Bus clks for others * @pclk: Bus clk for rk3399 * @clk_rate_nb: i2c clk rate change notify + * @irq: irq number * @t: I2C known timing information * @lock: spinlock for the i2c bus * @wait: the waitqueue to wait for i2c transfer @@ -200,6 +201,7 @@ struct rk3x_i2c { struct clk *clk; struct clk *pclk; struct notifier_block clk_rate_nb; + int irq;
/* Settings */ struct i2c_timings t; @@ -1087,13 +1089,18 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
spin_unlock_irqrestore(&i2c->lock, flags);
- rk3x_i2c_start(i2c); - if (!polling) { + rk3x_i2c_start(i2c); + timeout = wait_event_timeout(i2c->wait, !i2c->busy, msecs_to_jiffies(WAIT_TIMEOUT)); } else { + disable_irq(i2c->irq); + rk3x_i2c_start(i2c); + timeout = rk3x_i2c_wait_xfer_poll(i2c); + + enable_irq(i2c->irq); }
spin_lock_irqsave(&i2c->lock, flags); @@ -1310,6 +1317,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev) return ret; }
+ i2c->irq = irq; + platform_set_drvdata(pdev, i2c);
if (i2c->soc_data->calc_timings == rk3x_i2c_v0_calc_timings) {
From: Philip Yang Philip.Yang@amd.com
[ Upstream commit ebab8c3eb6a6515dc14cd93fc29dd287709da6d3 ]
On gfx943 APU there is no VRAM and page migration, queue CWSR area, svm range with always mapped flag, is not mapped to GPU correctly. This works fine if retry fault on CWSR area can be recovered, but could cause deadlock if there is another retry fault recover waiting for CWSR to finish.
Fix this by mapping svm range with always mapped flag to GPU with ACCESS attribute if XNACK ON.
There is side effect, because all GPUs have ACCESS attribute by default on new svm range with XNACK on, the CWSR area will be mapped to all GPUs after this change. This side effect will be fixed with Thunk change to set CWSR svm range with ACCESS_IN_PLACE attribute on the GPU that user queue is created.
Signed-off-by: Philip Yang Philip.Yang@amd.com Reviewed-by: Felix Kuehling felix.kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c index 63ce30ea68915..8e368e4659fd5 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c @@ -1632,18 +1632,24 @@ static int svm_range_validate_and_map(struct mm_struct *mm, if (test_bit(gpuidx, prange->bitmap_access)) bitmap_set(ctx->bitmap, gpuidx, 1); } + + /* + * If prange is already mapped or with always mapped flag, + * update mapping on GPUs with ACCESS attribute + */ + if (bitmap_empty(ctx->bitmap, MAX_GPU_INSTANCE)) { + if (prange->mapped_to_gpu || + prange->flags & KFD_IOCTL_SVM_FLAG_GPU_ALWAYS_MAPPED) + bitmap_copy(ctx->bitmap, prange->bitmap_access, MAX_GPU_INSTANCE); + } } else { bitmap_or(ctx->bitmap, prange->bitmap_access, prange->bitmap_aip, MAX_GPU_INSTANCE); }
if (bitmap_empty(ctx->bitmap, MAX_GPU_INSTANCE)) { - bitmap_copy(ctx->bitmap, prange->bitmap_access, MAX_GPU_INSTANCE); - if (!prange->mapped_to_gpu || - bitmap_empty(ctx->bitmap, MAX_GPU_INSTANCE)) { - r = 0; - goto free_ctx; - } + r = 0; + goto free_ctx; }
if (prange->actual_loc && !prange->ttm_res) {
From: Wayne Lin wayne.lin@amd.com
[ Upstream commit 989824589f793120833bef13aa4e21f5a836a707 ]
[Why & how] Refactor dc_is_dmub_outbox_supported() a bit and add case for dcn35 to register dmub outbox notification irq to handle usb4 relevant hpd event.
Reviewed-by: Roman Li roman.li@amd.com Reviewed-by: Jun Lei jun.lei@amd.com Signed-off-by: Wayne Lin wayne.lin@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc.c | 26 ++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index a1be93f6385c6..8cdf380bf3665 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -4865,18 +4865,28 @@ void dc_mclk_switch_using_fw_based_vblank_stretch_shut_down(struct dc *dc) */ bool dc_is_dmub_outbox_supported(struct dc *dc) { - /* DCN31 B0 USB4 DPIA needs dmub notifications for interrupts */ - if (dc->ctx->asic_id.chip_family == FAMILY_YELLOW_CARP && - dc->ctx->asic_id.hw_internal_rev == YELLOW_CARP_B0 && - !dc->debug.dpia_debug.bits.disable_dpia) - return true; + switch (dc->ctx->asic_id.chip_family) {
- if (dc->ctx->asic_id.chip_family == AMDGPU_FAMILY_GC_11_0_1 && - !dc->debug.dpia_debug.bits.disable_dpia) - return true; + case FAMILY_YELLOW_CARP: + /* DCN31 B0 USB4 DPIA needs dmub notifications for interrupts */ + if (dc->ctx->asic_id.hw_internal_rev == YELLOW_CARP_B0 && + !dc->debug.dpia_debug.bits.disable_dpia) + return true; + break; + + case AMDGPU_FAMILY_GC_11_0_1: + case AMDGPU_FAMILY_GC_11_5_0: + if (!dc->debug.dpia_debug.bits.disable_dpia) + return true; + break; + + default: + break; + }
/* dmub aux needs dmub notifications to be enabled */ return dc->debug.enable_dmub_aux_for_legacy_ddc; + }
/**
From: Charlene Liu charlene.liu@amd.com
[ Upstream commit 51e7b64690776a9981355428b537af9048308a95 ]
[why & how] we have two SSC_En: we get ssc_info from dce_info for MPLL_SSC_EN. we used to call VBIOS cmdtbl's smu_info's SS persentage for DPRECLK SS info, is used for DP AUDIO and VBIOS' smu_info table was from systemIntegrationInfoTable.
since dcn35 VBIOS removed smu_info, driver need to use integrationInfotable directly.
Reviewed-by: Nicholas Kazlauskas nicholas.kazlauskas@amd.com Acked-by: Wayne Lin wayne.lin@amd.com Signed-off-by: Charlene Liu charlene.liu@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/display/dc/bios/bios_parser2.c | 19 ++++++++++++++----- .../display/include/grph_object_ctrl_defs.h | 2 ++ 2 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c index 484d62bcf2c2e..518c5672d3848 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c @@ -1015,13 +1015,20 @@ static enum bp_result get_ss_info_v4_5( DC_LOG_BIOS("AS_SIGNAL_TYPE_HDMI ss_percentage: %d\n", ss_info->spread_spectrum_percentage); break; case AS_SIGNAL_TYPE_DISPLAY_PORT: - ss_info->spread_spectrum_percentage = + if (bp->base.integrated_info) { + DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", bp->base.integrated_info->gpuclk_ss_percentage); + ss_info->spread_spectrum_percentage = + bp->base.integrated_info->gpuclk_ss_percentage; + ss_info->type.CENTER_MODE = + bp->base.integrated_info->gpuclk_ss_type; + } else { + ss_info->spread_spectrum_percentage = disp_cntl_tbl->dp_ss_percentage; - ss_info->spread_spectrum_range = + ss_info->spread_spectrum_range = disp_cntl_tbl->dp_ss_rate_10hz * 10; - if (disp_cntl_tbl->dp_ss_mode & ATOM_SS_CENTRE_SPREAD_MODE) - ss_info->type.CENTER_MODE = true; - + if (disp_cntl_tbl->dp_ss_mode & ATOM_SS_CENTRE_SPREAD_MODE) + ss_info->type.CENTER_MODE = true; + } DC_LOG_BIOS("AS_SIGNAL_TYPE_DISPLAY_PORT ss_percentage: %d\n", ss_info->spread_spectrum_percentage); break; case AS_SIGNAL_TYPE_GPU_PLL: @@ -2826,6 +2833,8 @@ static enum bp_result get_integrated_info_v2_2( info->ma_channel_number = info_v2_2->umachannelnumber; info->dp_ss_control = le16_to_cpu(info_v2_2->reserved1); + info->gpuclk_ss_percentage = info_v2_2->gpuclk_ss_percentage; + info->gpuclk_ss_type = info_v2_2->gpuclk_ss_type;
for (i = 0; i < NUMBER_OF_UCHAR_FOR_GUID; ++i) { info->ext_disp_conn_info.gu_id[i] = diff --git a/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h b/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h index bc96d02113608..813463ffe15c5 100644 --- a/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h +++ b/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h @@ -417,6 +417,8 @@ struct integrated_info { /* V2.1 */ struct edp_info edp1_info; struct edp_info edp2_info; + uint32_t gpuclk_ss_percentage; + uint32_t gpuclk_ss_type; };
/*
From: Patrick Rudolph patrick.rudolph@9elements.com
[ Upstream commit 47b1fa48116238208c1b1198dba10f56fc1b6eb2 ]
Fix typo to make pinctrl-cy8c95x compile again.
Signed-off-by: Patrick Rudolph patrick.rudolph@9elements.com Link: https://lore.kernel.org/r/20231219125120.4028862-1-patrick.rudolph@9elements... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-cy8c95x0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index 58ca6fac7849a..993b30ebc6841 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -821,7 +821,7 @@ static int cy8c95x0_setup_gpiochip(struct cy8c95x0_pinctrl *chip) gc->get_direction = cy8c95x0_gpio_get_direction; gc->get_multiple = cy8c95x0_gpio_get_multiple; gc->set_multiple = cy8c95x0_gpio_set_multiple; - gc->set_config = gpiochip_generic_config, + gc->set_config = gpiochip_generic_config; gc->can_sleep = true; gc->add_pin_ranges = cy8c95x0_add_pin_ranges;
From: Patrick Rudolph patrick.rudolph@9elements.com
[ Upstream commit 04dfca968cf7349773126340991b68a83378aca2 ]
Commit 1fa3df901f2c ("pinctrl: cy8c95x0: Remove custom ->set_config()") removed support for PIN_CONFIG_INPUT_ENABLE and PIN_CONFIG_OUTPUT.
Add the following options to restore functionality: - PIN_CONFIG_INPUT_ENABLE - PIN_CONFIG_OUTPUT_ENABLE
Signed-off-by: Patrick Rudolph patrick.rudolph@9elements.com Link: https://lore.kernel.org/r/20231219125120.4028862-2-patrick.rudolph@9elements... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-cy8c95x0.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index 993b30ebc6841..280d7ebd50b71 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -307,6 +307,9 @@ static const char * const cy8c95x0_groups[] = { "gp77", };
+static int cy8c95x0_pinmux_direction(struct cy8c95x0_pinctrl *chip, + unsigned int pin, bool input); + static inline u8 cypress_get_port(struct cy8c95x0_pinctrl *chip, unsigned int pin) { /* Account for GPORT2 which only has 4 bits */ @@ -726,6 +729,7 @@ static int cy8c95x0_gpio_set_pincfg(struct cy8c95x0_pinctrl *chip, u8 port = cypress_get_port(chip, off); u8 bit = cypress_get_pin_mask(chip, off); unsigned long param = pinconf_to_config_param(config); + unsigned long arg = pinconf_to_config_argument(config); unsigned int reg; int ret;
@@ -764,6 +768,12 @@ static int cy8c95x0_gpio_set_pincfg(struct cy8c95x0_pinctrl *chip, case PIN_CONFIG_MODE_PWM: reg = CY8C95X0_PWMSEL; break; + case PIN_CONFIG_OUTPUT_ENABLE: + ret = cy8c95x0_pinmux_direction(chip, off, !arg); + goto out; + case PIN_CONFIG_INPUT_ENABLE: + ret = cy8c95x0_pinmux_direction(chip, off, arg); + goto out; default: ret = -ENOTSUPP; goto out;
From: Patrick Rudolph patrick.rudolph@9elements.com
[ Upstream commit 94c71705cc49092cef60ece13a28680809096fd4 ]
Invert the register value for PIN_CONFIG_OUTPUT_ENABLE to return the opposite of PIN_CONFIG_INPUT_ENABLE.
Signed-off-by: Patrick Rudolph patrick.rudolph@9elements.com Link: https://lore.kernel.org/r/20231219125120.4028862-3-patrick.rudolph@9elements... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-cy8c95x0.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index 280d7ebd50b71..f2b9db66fdb6a 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -714,6 +714,8 @@ static int cy8c95x0_gpio_get_pincfg(struct cy8c95x0_pinctrl *chip, ret = regmap_read(chip->regmap, reg, ®_val); if (reg_val & bit) arg = 1; + if (param == PIN_CONFIG_OUTPUT_ENABLE) + arg = !arg;
*config = pinconf_to_config_packed(param, (u16)arg); out:
From: Linus Torvalds torvalds@linux-foundation.org
[ Upstream commit a4aebe936554dac6a91e5d091179c934f8325708 ]
Only the posix timer system calls use this (when the posix timer support is disabled, which does not actually happen in any normal case), because they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL interface that creates weak system call stubs that return -ENOSYS for when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9) WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot oliver.sang@intel.com Reviewed-by: Sami Tolvanen samitolvanen@google.com Tested-by: Sami Tolvanen samitolvanen@google.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Dave Hansen dave.hansen@linux.intel.com Cc: Borislav Petkov bp@alien8.de Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/include/asm/syscall_wrapper.h | 4 --- arch/riscv/include/asm/syscall_wrapper.h | 5 --- arch/s390/include/asm/syscall_wrapper.h | 13 +------ arch/x86/include/asm/syscall_wrapper.h | 34 +++--------------- kernel/sys_ni.c | 14 ++++++++ kernel/time/posix-stubs.c | 45 ------------------------ 6 files changed, 19 insertions(+), 96 deletions(-)
diff --git a/arch/arm64/include/asm/syscall_wrapper.h b/arch/arm64/include/asm/syscall_wrapper.h index 17f687510c485..7a0e7b59be9b9 100644 --- a/arch/arm64/include/asm/syscall_wrapper.h +++ b/arch/arm64/include/asm/syscall_wrapper.h @@ -44,9 +44,6 @@ return sys_ni_syscall(); \ }
-#define COMPAT_SYS_NI(name) \ - SYSCALL_ALIAS(__arm64_compat_sys_##name, sys_ni_posix_timers); - #endif /* CONFIG_COMPAT */
#define __SYSCALL_DEFINEx(x, name, ...) \ @@ -82,6 +79,5 @@ }
asmlinkage long __arm64_sys_ni_syscall(const struct pt_regs *__unused); -#define SYS_NI(name) SYSCALL_ALIAS(__arm64_sys_##name, sys_ni_posix_timers);
#endif /* __ASM_SYSCALL_WRAPPER_H */ diff --git a/arch/riscv/include/asm/syscall_wrapper.h b/arch/riscv/include/asm/syscall_wrapper.h index 1d7942c8a6cba..eeec04b7dae67 100644 --- a/arch/riscv/include/asm/syscall_wrapper.h +++ b/arch/riscv/include/asm/syscall_wrapper.h @@ -46,9 +46,6 @@ asmlinkage long __riscv_sys_ni_syscall(const struct pt_regs *); return sys_ni_syscall(); \ }
-#define COMPAT_SYS_NI(name) \ - SYSCALL_ALIAS(__riscv_compat_sys_##name, sys_ni_posix_timers); - #endif /* CONFIG_COMPAT */
#define __SYSCALL_DEFINEx(x, name, ...) \ @@ -82,6 +79,4 @@ asmlinkage long __riscv_sys_ni_syscall(const struct pt_regs *); return sys_ni_syscall(); \ }
-#define SYS_NI(name) SYSCALL_ALIAS(__riscv_sys_##name, sys_ni_posix_timers); - #endif /* __ASM_SYSCALL_WRAPPER_H */ diff --git a/arch/s390/include/asm/syscall_wrapper.h b/arch/s390/include/asm/syscall_wrapper.h index 9286430fe7290..35c1d1b860d88 100644 --- a/arch/s390/include/asm/syscall_wrapper.h +++ b/arch/s390/include/asm/syscall_wrapper.h @@ -63,10 +63,6 @@ cond_syscall(__s390x_sys_##name); \ cond_syscall(__s390_sys_##name)
-#define SYS_NI(name) \ - SYSCALL_ALIAS(__s390x_sys_##name, sys_ni_posix_timers); \ - SYSCALL_ALIAS(__s390_sys_##name, sys_ni_posix_timers) - #define COMPAT_SYSCALL_DEFINEx(x, name, ...) \ long __s390_compat_sys##name(struct pt_regs *regs); \ ALLOW_ERROR_INJECTION(__s390_compat_sys##name, ERRNO); \ @@ -85,15 +81,11 @@
/* * As some compat syscalls may not be implemented, we need to expand - * COND_SYSCALL_COMPAT in kernel/sys_ni.c and COMPAT_SYS_NI in - * kernel/time/posix-stubs.c to cover this case as well. + * COND_SYSCALL_COMPAT in kernel/sys_ni.c to cover this case as well. */ #define COND_SYSCALL_COMPAT(name) \ cond_syscall(__s390_compat_sys_##name)
-#define COMPAT_SYS_NI(name) \ - SYSCALL_ALIAS(__s390_compat_sys_##name, sys_ni_posix_timers) - #define __S390_SYS_STUBx(x, name, ...) \ long __s390_sys##name(struct pt_regs *regs); \ ALLOW_ERROR_INJECTION(__s390_sys##name, ERRNO); \ @@ -124,9 +116,6 @@ #define COND_SYSCALL(name) \ cond_syscall(__s390x_sys_##name)
-#define SYS_NI(name) \ - SYSCALL_ALIAS(__s390x_sys_##name, sys_ni_posix_timers) - #define __S390_SYS_STUBx(x, fullname, name, ...)
#endif /* CONFIG_COMPAT */ diff --git a/arch/x86/include/asm/syscall_wrapper.h b/arch/x86/include/asm/syscall_wrapper.h index fd2669b1cb2d9..21f9407be5d35 100644 --- a/arch/x86/include/asm/syscall_wrapper.h +++ b/arch/x86/include/asm/syscall_wrapper.h @@ -86,9 +86,6 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs); return sys_ni_syscall(); \ }
-#define __SYS_NI(abi, name) \ - SYSCALL_ALIAS(__##abi##_##name, sys_ni_posix_timers); - #ifdef CONFIG_X86_64 #define __X64_SYS_STUB0(name) \ __SYS_STUB0(x64, sys_##name) @@ -100,13 +97,10 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs); #define __X64_COND_SYSCALL(name) \ __COND_SYSCALL(x64, sys_##name)
-#define __X64_SYS_NI(name) \ - __SYS_NI(x64, sys_##name) #else /* CONFIG_X86_64 */ #define __X64_SYS_STUB0(name) #define __X64_SYS_STUBx(x, name, ...) #define __X64_COND_SYSCALL(name) -#define __X64_SYS_NI(name) #endif /* CONFIG_X86_64 */
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION) @@ -120,13 +114,10 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs); #define __IA32_COND_SYSCALL(name) \ __COND_SYSCALL(ia32, sys_##name)
-#define __IA32_SYS_NI(name) \ - __SYS_NI(ia32, sys_##name) #else /* CONFIG_X86_32 || CONFIG_IA32_EMULATION */ #define __IA32_SYS_STUB0(name) #define __IA32_SYS_STUBx(x, name, ...) #define __IA32_COND_SYSCALL(name) -#define __IA32_SYS_NI(name) #endif /* CONFIG_X86_32 || CONFIG_IA32_EMULATION */
#ifdef CONFIG_IA32_EMULATION @@ -135,8 +126,7 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs); * additional wrappers (aptly named __ia32_sys_xyzzy) which decode the * ia32 regs in the proper order for shared or "common" syscalls. As some * syscalls may not be implemented, we need to expand COND_SYSCALL in - * kernel/sys_ni.c and SYS_NI in kernel/time/posix-stubs.c to cover this - * case as well. + * kernel/sys_ni.c to cover this case as well. */ #define __IA32_COMPAT_SYS_STUB0(name) \ __SYS_STUB0(ia32, compat_sys_##name) @@ -148,14 +138,10 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs); #define __IA32_COMPAT_COND_SYSCALL(name) \ __COND_SYSCALL(ia32, compat_sys_##name)
-#define __IA32_COMPAT_SYS_NI(name) \ - __SYS_NI(ia32, compat_sys_##name) - #else /* CONFIG_IA32_EMULATION */ #define __IA32_COMPAT_SYS_STUB0(name) #define __IA32_COMPAT_SYS_STUBx(x, name, ...) #define __IA32_COMPAT_COND_SYSCALL(name) -#define __IA32_COMPAT_SYS_NI(name) #endif /* CONFIG_IA32_EMULATION */
@@ -175,13 +161,10 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs); #define __X32_COMPAT_COND_SYSCALL(name) \ __COND_SYSCALL(x64, compat_sys_##name)
-#define __X32_COMPAT_SYS_NI(name) \ - __SYS_NI(x64, compat_sys_##name) #else /* CONFIG_X86_X32_ABI */ #define __X32_COMPAT_SYS_STUB0(name) #define __X32_COMPAT_SYS_STUBx(x, name, ...) #define __X32_COMPAT_COND_SYSCALL(name) -#define __X32_COMPAT_SYS_NI(name) #endif /* CONFIG_X86_X32_ABI */
@@ -212,17 +195,12 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs);
/* * As some compat syscalls may not be implemented, we need to expand - * COND_SYSCALL_COMPAT in kernel/sys_ni.c and COMPAT_SYS_NI in - * kernel/time/posix-stubs.c to cover this case as well. + * COND_SYSCALL_COMPAT in kernel/sys_ni.c to cover this case as well. */ #define COND_SYSCALL_COMPAT(name) \ __IA32_COMPAT_COND_SYSCALL(name) \ __X32_COMPAT_COND_SYSCALL(name)
-#define COMPAT_SYS_NI(name) \ - __IA32_COMPAT_SYS_NI(name) \ - __X32_COMPAT_SYS_NI(name) - #endif /* CONFIG_COMPAT */
#define __SYSCALL_DEFINEx(x, name, ...) \ @@ -243,8 +221,8 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs); * As the generic SYSCALL_DEFINE0() macro does not decode any parameters for * obvious reasons, and passing struct pt_regs *regs to it in %rdi does not * hurt, we only need to re-define it here to keep the naming congruent to - * SYSCALL_DEFINEx() -- which is essential for the COND_SYSCALL() and SYS_NI() - * macros to work correctly. + * SYSCALL_DEFINEx() -- which is essential for the COND_SYSCALL() macro + * to work correctly. */ #define SYSCALL_DEFINE0(sname) \ SYSCALL_METADATA(_##sname, 0); \ @@ -257,10 +235,6 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs); __X64_COND_SYSCALL(name) \ __IA32_COND_SYSCALL(name)
-#define SYS_NI(name) \ - __X64_SYS_NI(name) \ - __IA32_SYS_NI(name) -
/* * For VSYSCALLS, we need to declare these three syscalls with the new diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c index e137c1385c569..11c55593a2e91 100644 --- a/kernel/sys_ni.c +++ b/kernel/sys_ni.c @@ -200,6 +200,20 @@ COND_SYSCALL(recvmmsg_time32); COND_SYSCALL_COMPAT(recvmmsg_time32); COND_SYSCALL_COMPAT(recvmmsg_time64);
+/* Posix timer syscalls may be configured out */ +COND_SYSCALL(timer_create); +COND_SYSCALL(timer_gettime); +COND_SYSCALL(timer_getoverrun); +COND_SYSCALL(timer_settime); +COND_SYSCALL(timer_delete); +COND_SYSCALL(clock_adjtime); +COND_SYSCALL(getitimer); +COND_SYSCALL(setitimer); +COND_SYSCALL(alarm); +COND_SYSCALL_COMPAT(timer_create); +COND_SYSCALL_COMPAT(getitimer); +COND_SYSCALL_COMPAT(setitimer); + /* * Architecture specific syscalls: see further below */ diff --git a/kernel/time/posix-stubs.c b/kernel/time/posix-stubs.c index 828aeecbd1e8a..9b6fcb8d85e78 100644 --- a/kernel/time/posix-stubs.c +++ b/kernel/time/posix-stubs.c @@ -17,40 +17,6 @@ #include <linux/time_namespace.h> #include <linux/compat.h>
-#ifdef CONFIG_ARCH_HAS_SYSCALL_WRAPPER -/* Architectures may override SYS_NI and COMPAT_SYS_NI */ -#include <asm/syscall_wrapper.h> -#endif - -asmlinkage long sys_ni_posix_timers(void) -{ - pr_err_once("process %d (%s) attempted a POSIX timer syscall " - "while CONFIG_POSIX_TIMERS is not set\n", - current->pid, current->comm); - return -ENOSYS; -} - -#ifndef SYS_NI -#define SYS_NI(name) SYSCALL_ALIAS(sys_##name, sys_ni_posix_timers) -#endif - -#ifndef COMPAT_SYS_NI -#define COMPAT_SYS_NI(name) SYSCALL_ALIAS(compat_sys_##name, sys_ni_posix_timers) -#endif - -SYS_NI(timer_create); -SYS_NI(timer_gettime); -SYS_NI(timer_getoverrun); -SYS_NI(timer_settime); -SYS_NI(timer_delete); -SYS_NI(clock_adjtime); -SYS_NI(getitimer); -SYS_NI(setitimer); -SYS_NI(clock_adjtime32); -#ifdef __ARCH_WANT_SYS_ALARM -SYS_NI(alarm); -#endif - /* * We preserve minimal support for CLOCK_REALTIME and CLOCK_MONOTONIC * as it is easy to remain compatible with little code. CLOCK_BOOTTIME @@ -158,18 +124,7 @@ SYSCALL_DEFINE4(clock_nanosleep, const clockid_t, which_clock, int, flags, which_clock); }
-#ifdef CONFIG_COMPAT -COMPAT_SYS_NI(timer_create); -#endif - -#if defined(CONFIG_COMPAT) || defined(CONFIG_ALPHA) -COMPAT_SYS_NI(getitimer); -COMPAT_SYS_NI(setitimer); -#endif - #ifdef CONFIG_COMPAT_32BIT_TIME -SYS_NI(timer_settime32); -SYS_NI(timer_gettime32);
SYSCALL_DEFINE2(clock_settime32, const clockid_t, which_clock, struct old_timespec32 __user *, tp)
From: "Matthew Wilcox (Oracle)" willy@infradead.org
[ Upstream commit af73483f4e8b6f5c68c9aa63257bdd929a9c194a ]
The IDA usually detects double-frees, but that detection failed to consider the case when there are no nearby IDs allocated and so we have a NULL bitmap rather than simply having a clear bit. Add some tests to the test-suite to be sure we don't inadvertently reintroduce this problem. Unfortunately they're quite noisy so include a message to disregard the warnings.
Reported-by: Zhenghan Wang wzhmmmmm@gmail.com Signed-off-by: Matthew Wilcox (Oracle) willy@infradead.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/idr.c | 2 +- lib/test_ida.c | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+), 1 deletion(-)
diff --git a/lib/idr.c b/lib/idr.c index 13f2758c23773..da36054c3ca02 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -508,7 +508,7 @@ void ida_free(struct ida *ida, unsigned int id) goto delete; xas_store(&xas, xa_mk_value(v)); } else { - if (!test_bit(bit, bitmap->bitmap)) + if (!bitmap || !test_bit(bit, bitmap->bitmap)) goto err; __clear_bit(bit, bitmap->bitmap); xas_set_mark(&xas, XA_FREE_MARK); diff --git a/lib/test_ida.c b/lib/test_ida.c index b068806259615..55105baa19da9 100644 --- a/lib/test_ida.c +++ b/lib/test_ida.c @@ -150,6 +150,45 @@ static void ida_check_conv(struct ida *ida) IDA_BUG_ON(ida, !ida_is_empty(ida)); }
+/* + * Check various situations where we attempt to free an ID we don't own. + */ +static void ida_check_bad_free(struct ida *ida) +{ + unsigned long i; + + printk("vvv Ignore "not allocated" warnings\n"); + /* IDA is empty; all of these will fail */ + ida_free(ida, 0); + for (i = 0; i < 31; i++) + ida_free(ida, 1 << i); + + /* IDA contains a single value entry */ + IDA_BUG_ON(ida, ida_alloc_min(ida, 3, GFP_KERNEL) != 3); + ida_free(ida, 0); + for (i = 0; i < 31; i++) + ida_free(ida, 1 << i); + + /* IDA contains a single bitmap */ + IDA_BUG_ON(ida, ida_alloc_min(ida, 1023, GFP_KERNEL) != 1023); + ida_free(ida, 0); + for (i = 0; i < 31; i++) + ida_free(ida, 1 << i); + + /* IDA contains a tree */ + IDA_BUG_ON(ida, ida_alloc_min(ida, (1 << 20) - 1, GFP_KERNEL) != (1 << 20) - 1); + ida_free(ida, 0); + for (i = 0; i < 31; i++) + ida_free(ida, 1 << i); + printk("^^^ "not allocated" warnings over\n"); + + ida_free(ida, 3); + ida_free(ida, 1023); + ida_free(ida, (1 << 20) - 1); + + IDA_BUG_ON(ida, !ida_is_empty(ida)); +} + static DEFINE_IDA(ida);
static int ida_checks(void) @@ -162,6 +201,7 @@ static int ida_checks(void) ida_check_leaf(&ida, 1024 * 64); ida_check_max(&ida); ida_check_conv(&ida); + ida_check_bad_free(&ida);
printk("IDA: %u of %u tests passed\n", tests_passed, tests_run); return (tests_run != tests_passed) ? 0 : -EINVAL;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin