[PATCH AUTOSEL 4.19 1/5] x86/PCI: Ignore E820 reservations for bridge windows on newer systems
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 7f7b4236f2040d19df1ddaf30047128b41e78de7 ]
Some BIOS-es contain a bug where they add addresses which map to system RAM in the PCI host bridge window returned by the ACPI _CRS method, see commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address space").
To work around this bug Linux excludes E820 reserved addresses when allocating addresses from the PCI host bridge window since 2010.
Recently (2019) some systems have shown-up with E820 reservations which cover the entire _CRS returned PCI bridge memory window, causing all attempts to assign memory to PCI BARs which have not been setup by the BIOS to fail. For example here are the relevant dmesg bits from a Lenovo IdeaPad 3 15IIL 81WE:
[mem 0x000000004bc50000-0x00000000cfffffff] reserved pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window]
The ACPI specifications appear to allow this new behavior:
The relationship between E820 and ACPI _CRS is not really very clear. ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means:
This range of addresses is in use or reserved by the system and is not to be included in the allocatable memory pool of the operating system's memory manager.
and it may be used when:
The address range is in use by a memory-mapped system device.
Furthermore, sec 15.2 says:
Address ranges defined for baseboard memory-mapped I/O devices, such as APICs, are returned as reserved.
A PCI host bridge qualifies as a baseboard memory-mapped I/O device, and its apertures are in use and certainly should not be included in the general allocatable pool, so the fact that some BIOS-es reports the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug.
So it seems that the excluding of E820 reserved addresses is a mistake.
Ideally Linux would fully stop excluding E820 reserved addresses, but then the old systems this was added for will regress. Instead keep the old behavior for old systems, while ignoring the E820 reservations for any systems from now on.
Old systems are defined here as BIOS year < 2018, this was chosen to make sure that E820 reservations will not be used on the currently affected systems, while at the same time also taking into account that the systems for which the E820 checking was originally added may have received BIOS updates for quite a while (esp. CVE related ones), giving them a more recent BIOS year then 2010.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793 BugLink: https://bugs.launchpad.net/bugs/1878279 BugLink: https://bugs.launchpad.net/bugs/1931715 BugLink: https://bugs.launchpad.net/bugs/1932069 BugLink: https://bugs.launchpad.net/bugs/1921649 Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Acked-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/resource.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c index 9b9fb7882c206..9ae64f9af9568 100644 --- a/arch/x86/kernel/resource.c +++ b/arch/x86/kernel/resource.c @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 +#include <linux/dmi.h> #include <linux/ioport.h> #include <asm/e820/api.h>
@@ -23,11 +24,31 @@ static void resource_clip(struct resource *res, resource_size_t start, res->start = end + 1; }
+/* + * Some BIOS-es contain a bug where they add addresses which map to + * system RAM in the PCI host bridge window returned by the ACPI _CRS + * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when + * allocating address space"). To avoid this Linux by default excludes + * E820 reservations when allocating addresses since 2010. + * In 2019 some systems have shown-up with E820 reservations which cover + * the entire _CRS returned PCI host bridge window, causing all attempts + * to assign memory to PCI BARs to fail if Linux uses E820 reservations. + * + * Ideally Linux would fully stop using E820 reservations, but then + * the old systems this was added for will regress. + * Instead keep the old behavior for old systems, while ignoring the + * E820 reservations for any systems from now on. + */ static void remove_e820_regions(struct resource *avail) { - int i; + int i, year = dmi_get_bios_year(); struct e820_entry *entry;
+ if (year >= 2018) + return; + + pr_info_once("PCI: Removing E820 reservations from host bridge windows\n"); + for (i = 0; i < e820_table->nr_entries; i++) { entry = &e820_table->entries[i];
From: Michael Ellerman mpe@ellerman.id.au
[ Upstream commit 6c8dc12cd925e5fa8c152633338b2b35c4c89258 ]
Since commit adeef3e32146 ("net: constify netdev->dev_addr") the mace driver no longer builds with various errors (pmac32_defconfig):
linux/drivers/net/ethernet/apple/mace.c: In function ‘mace_probe’: linux/drivers/net/ethernet/apple/mace.c:170:20: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)j)’ 170 | dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j]; | ^ linux/drivers/net/ethernet/apple/mace.c: In function ‘mace_reset’: linux/drivers/net/ethernet/apple/mace.c:349:32: warning: passing argument 2 of ‘__mace_set_address’ discards ‘const’ qualifier from pointer target type 349 | __mace_set_address(dev, dev->dev_addr); | ~~~^~~~~~~~~~ linux/drivers/net/ethernet/apple/mace.c:93:62: note: expected ‘void *’ but argument is of type ‘const unsigned char *’ 93 | static void __mace_set_address(struct net_device *dev, void *addr); | ~~~~~~^~~~ linux/drivers/net/ethernet/apple/mace.c: In function ‘__mace_set_address’: linux/drivers/net/ethernet/apple/mace.c:388:36: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)i)’ 388 | out_8(&mb->padr, dev->dev_addr[i] = p[i]); | ^
Fix it by making the modifications to a local macaddr variable and then passing that to eth_hw_addr_set(), as well as adding some missing const qualifiers.
Signed-off-by: Michael Ellerman mpe@ellerman.id.au Reviewed-by: Jakub Kicinski kuba@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/apple/mace.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c index 68b9ee4894892..68d85b236953b 100644 --- a/drivers/net/ethernet/apple/mace.c +++ b/drivers/net/ethernet/apple/mace.c @@ -89,7 +89,7 @@ static void mace_set_timeout(struct net_device *dev); static void mace_tx_timeout(struct timer_list *t); static inline void dbdma_reset(volatile struct dbdma_regs __iomem *dma); static inline void mace_clean_rings(struct mace_data *mp); -static void __mace_set_address(struct net_device *dev, void *addr); +static void __mace_set_address(struct net_device *dev, const void *addr);
/* * If we can't get a skbuff when we need it, we use this area for DMA. @@ -111,6 +111,7 @@ static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match) struct net_device *dev; struct mace_data *mp; const unsigned char *addr; + u8 macaddr[ETH_ALEN]; int j, rev, rc = -EBUSY;
if (macio_resource_count(mdev) != 3 || macio_irq_count(mdev) != 3) { @@ -166,8 +167,9 @@ static int mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
rev = addr[0] == 0 && addr[1] == 0xA0; for (j = 0; j < 6; ++j) { - dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j]; + macaddr[j] = rev ? bitrev8(addr[j]): addr[j]; } + eth_hw_addr_set(dev, macaddr); mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) | in_8(&mp->mace->chipid_lo);
@@ -368,11 +370,12 @@ static void mace_reset(struct net_device *dev) out_8(&mb->plscc, PORTSEL_GPSI + ENPLSIO); }
-static void __mace_set_address(struct net_device *dev, void *addr) +static void __mace_set_address(struct net_device *dev, const void *addr) { struct mace_data *mp = netdev_priv(dev); volatile struct mace __iomem *mb = mp->mace; - unsigned char *p = addr; + const unsigned char *p = addr; + u8 macaddr[ETH_ALEN]; int i;
/* load up the hardware address */ @@ -384,7 +387,10 @@ static void __mace_set_address(struct net_device *dev, void *addr) ; } for (i = 0; i < 6; ++i) - out_8(&mb->padr, dev->dev_addr[i] = p[i]); + out_8(&mb->padr, macaddr[i] = p[i]); + + eth_hw_addr_set(dev, macaddr); + if (mp->chipid != BROKEN_ADDRCHG_REV) out_8(&mb->iac, 0); }
From: Michael Ellerman mpe@ellerman.id.au
[ Upstream commit ea938248557a52e231a31f338eac4baee36a8626 ]
Since commit adeef3e32146 ("net: constify netdev->dev_addr") the bmac driver no longer builds with the following errors (pmac32_defconfig):
linux/drivers/net/ethernet/apple/bmac.c: In function ‘bmac_probe’: linux/drivers/net/ethernet/apple/bmac.c:1287:20: error: assignment of read-only location ‘*(dev->dev_addr + (sizetype)j)’ 1287 | dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j]; | ^
Fix it by making the modifications to a local macaddr variable and then passing that to eth_hw_addr_set().
We don't use the existing addr variable because the bitrev8() would mutate it, but it is already used unreversed later in the function.
Signed-off-by: Michael Ellerman mpe@ellerman.id.au Reviewed-by: Jakub Kicinski kuba@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/apple/bmac.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index ab6ce85540b8a..157ad5b81c730 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -1239,6 +1239,7 @@ static int bmac_probe(struct macio_dev *mdev, const struct of_device_id *match) struct bmac_data *bp; const unsigned char *prop_addr; unsigned char addr[6]; + u8 macaddr[6]; struct net_device *dev; int is_bmac_plus = ((int)match->data) != 0;
@@ -1286,7 +1287,9 @@ static int bmac_probe(struct macio_dev *mdev, const struct of_device_id *match)
rev = addr[0] == 0 && addr[1] == 0xA0; for (j = 0; j < 6; ++j) - dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j]; + macaddr[j] = rev ? bitrev8(addr[j]): addr[j]; + + eth_hw_addr_set(dev, macaddr);
/* Enable chip without interrupts for now */ bmac_enable_and_reset_chip(dev);
From: 王贇 yun.wang@linux.alibaba.com
[ Upstream commit 6017599bb25c20b7a68cbb8e7d534bdc1c36b5e4 ]
The error message on the failure of pfn check should tell virtio-pci rather than virtio-mmio, just fix it.
Signed-off-by: Michael Wang yun.wang@linux.alibaba.com Suggested-by: Michael S. Tsirkin mst@redhat.com Link: https://lore.kernel.org/r/ae5e154e-ac59-f0fa-a7c7-091a2201f581@linux.alibaba... Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/virtio/virtio_pci_legacy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c index de062fb201bc2..61add42862017 100644 --- a/drivers/virtio/virtio_pci_legacy.c +++ b/drivers/virtio/virtio_pci_legacy.c @@ -145,7 +145,7 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, q_pfn = virtqueue_get_desc_addr(vq) >> VIRTIO_PCI_QUEUE_ADDR_SHIFT; if (q_pfn >> 32) { dev_err(&vp_dev->pci_dev->dev, - "platform bug: legacy virtio-mmio must not be used with RAM above 0x%llxGB\n", + "platform bug: legacy virtio-pci must not be used with RAM above 0x%llxGB\n", 0x1ULL << (32 + PAGE_SHIFT - 30)); err = -E2BIG; goto out_del_vq;
From: Xianting Tian xianting.tian@linux.alibaba.com
[ Upstream commit 080063920777af65105e5953e2851e036376e3ea ]
We need free the vqs in .release(), which are allocated in .open().
Signed-off-by: Xianting Tian xianting.tian@linux.alibaba.com Link: https://lore.kernel.org/r/20211228030924.3468439-1-xianting.tian@linux.aliba... Signed-off-by: Michael S. Tsirkin mst@redhat.com Acked-by: Jason Wang jasowang@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/test.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c index 55090d9f9de0d..2d6abe1c0dbec 100644 --- a/drivers/vhost/test.c +++ b/drivers/vhost/test.c @@ -167,6 +167,7 @@ static int vhost_test_release(struct inode *inode, struct file *f) /* We do an extra flush before freeing memory, * since jobs can re-queue themselves. */ vhost_test_flush(n); + kfree(n->dev.vqs); kfree(n); return 0; }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin