There are indications that ASPM L0s is not working very well on this machine so disable it also for the modem and Wi-Fi controllers for now.

This specifically avoids having the modem and Wi-Fi controllers bounce in an out of L0s when not used (the modem still bounces in and out of L1) as well as intermittent Correctable errors on the Wi-Fi link when not used.

Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") Cc: stable@vger.kernel.org # 6.7 Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Signed-off-by: Johan Hovold johan+linaro@kernel.org --- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 7e94a68d5d9f..8fc0380f65a0 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -546,6 +546,8 @@ &pcie2a_phy { };

&pcie3a { + aspm-no-l0s; + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;

@@ -566,6 +568,7 @@ &pcie3a_phy {

&pcie4 { max-link-speed = <2>; + aspm-no-l0s;

perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;