Starting v6.5, Bluetooth does not work at all on my T2 MacBookAir9,1 with the BCM4377 chip. When I boot up the computer, go into bluetoothctl, and then try to run commands like scan on, show, list, it returns "No default controller available." I have tried reloading the kernel module, in which the log outputs "{Added,Removed} hci0 (unconfigured)." With this patch, I am able to use Bluetooth as normal without any errors regarding hci0 being unconfigured. However, an issue is still present where sometimes hci_bcm4377 will have to be reloaded in order to get bluetooth to work. I believe this was still present before the previously mentioned commit.
I would also like to thank Kerem Karabay kekrby@gmail.com for assisting me with this patch.
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org Signed-off-by: Felix Zhang mrman@mrman314.tech --- v4: * Adjust the format to pass the CI (again). * Shorten description --- drivers/bluetooth/hci_bcm4377.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcm4377.c b/drivers/bluetooth/hci_bcm4377.c index a61757835695..5c6fef1aa0f6 100644 --- a/drivers/bluetooth/hci_bcm4377.c +++ b/drivers/bluetooth/hci_bcm4377.c @@ -513,6 +513,7 @@ struct bcm4377_hw { unsigned long broken_ext_scan : 1; unsigned long broken_mws_transport_config : 1; unsigned long broken_le_coded : 1; + unsigned long use_bdaddr_property : 1; int (*send_calibration)(struct bcm4377_data *bcm4377); int (*send_ptb)(struct bcm4377_data *bcm4377, @@ -2368,5 +2369,6 @@ static int bcm4377_probe(struct pci_dev *pdev, const struct pci_device_id *id) hdev->set_bdaddr = bcm4377_hci_set_bdaddr; hdev->setup = bcm4377_hci_setup; - set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); + if (bcm4377->hw->use_bdaddr_property) + set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); if (bcm4377->hw->broken_mws_transport_config) @@ -2465,6 +2467,7 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = { .has_bar0_core2_window2 = true, .broken_mws_transport_config = true, .broken_le_coded = true, + .use_bdaddr_property = true, .send_calibration = bcm4378_send_calibration, .send_ptb = bcm4378_send_ptb, }, @@ -2479,6 +2482,7 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = { .clear_pciecfg_subsystem_ctrl_bit19 = true, .broken_mws_transport_config = true, .broken_le_coded = true, + .use_bdaddr_property = true, .send_calibration = bcm4387_send_calibration, .send_ptb = bcm4378_send_ptb, },
Hi,
On 25. Dec 2023, at 21:21, Felix Zhang mrman@mrman314.tech wrote: Starting v6.5, Bluetooth does not work at all on my T2 MacBookAir9,1 with the BCM4377 chip. When I boot up the computer, go into bluetoothctl, and then try to run commands like scan on, show, list, it returns "No default controller available." I have tried reloading the kernel module, in which the log outputs "{Added,Removed} hci0 (unconfigured)." With this patch, I am able to use Bluetooth as normal without any errors regarding hci0 being unconfigured. However, an issue is still present where sometimes hci_bcm4377 will have to be reloaded in order to get bluetooth to work. I believe this was still present before the previously mentioned commit. I would also like to thank Kerem Karabay kekrby@gmail.com for assisting me with this patch.
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org Signed-off-by: Felix Zhang mrman@mrman314.tech
Thanks a lot for debugging and fixing this! The diff looks good to me.
Reviewed-by: Sven Peter sven@svenpeter.dev
Best,
Sven
v4:
- Adjust the format to pass the CI (again).
- Shorten description
drivers/bluetooth/hci_bcm4377.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcm4377.c b/drivers/bluetooth/hci_bcm4377.c index a61757835695..5c6fef1aa0f6 100644 --- a/drivers/bluetooth/hci_bcm4377.c +++ b/drivers/bluetooth/hci_bcm4377.c @@ -513,6 +513,7 @@ struct bcm4377_hw { unsigned long broken_ext_scan : 1; unsigned long broken_mws_transport_config : 1; unsigned long broken_le_coded : 1;
- unsigned long use_bdaddr_property : 1;
int (*send_calibration)(struct bcm4377_data *bcm4377); int (*send_ptb)(struct bcm4377_data *bcm4377, @@ -2368,5 +2369,6 @@ static int bcm4377_probe(struct pci_dev *pdev, const struct pci_device_id *id) hdev->set_bdaddr = bcm4377_hci_set_bdaddr; hdev->setup = bcm4377_hci_setup;
- set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
- if (bcm4377->hw->use_bdaddr_property)
if (bcm4377->hw->broken_mws_transport_config)set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
@@ -2465,6 +2467,7 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = { .has_bar0_core2_window2 = true, .broken_mws_transport_config = true, .broken_le_coded = true,
},.use_bdaddr_property = true, .send_calibration = bcm4378_send_calibration, .send_ptb = bcm4378_send_ptb,
@@ -2479,6 +2482,7 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = { .clear_pciecfg_subsystem_ctrl_bit19 = true, .broken_mws_transport_config = true, .broken_le_coded = true,
},.use_bdaddr_property = true, .send_calibration = bcm4387_send_calibration, .send_ptb = bcm4378_send_ptb,
-- 2.43.0
On Mon, Dec 25, 2023 at 3:21 PM Felix Zhang mrman@mrman314.tech wrote:
Starting v6.5, Bluetooth does not work at all on my T2 MacBookAir9,1 with the BCM4377 chip. When I boot up the computer, go into bluetoothctl, and then try to run commands like scan on, show, list, it returns "No default controller available." I have tried reloading the kernel module, in which the log outputs "{Added,Removed} hci0 (unconfigured)." With this patch, I am able to use Bluetooth as normal without any errors regarding hci0 being unconfigured. However, an issue is still present where sometimes hci_bcm4377 will have to be reloaded in order to get bluetooth to work. I believe this was still present before the previously mentioned commit.
I would also like to thank Kerem Karabay kekrby@gmail.com for assisting me with this patch.
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org Signed-off-by: Felix Zhang mrman@mrman314.tech
v4:
- Adjust the format to pass the CI (again).
- Shorten description
drivers/bluetooth/hci_bcm4377.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcm4377.c b/drivers/bluetooth/hci_bcm4377.c index a61757835695..5c6fef1aa0f6 100644 --- a/drivers/bluetooth/hci_bcm4377.c +++ b/drivers/bluetooth/hci_bcm4377.c @@ -513,6 +513,7 @@ struct bcm4377_hw { unsigned long broken_ext_scan : 1; unsigned long broken_mws_transport_config : 1; unsigned long broken_le_coded : 1;
unsigned long use_bdaddr_property : 1; int (*send_calibration)(struct bcm4377_data *bcm4377); int (*send_ptb)(struct bcm4377_data *bcm4377,
@@ -2368,5 +2369,6 @@ static int bcm4377_probe(struct pci_dev *pdev, const struct pci_device_id *id) hdev->set_bdaddr = bcm4377_hci_set_bdaddr; hdev->setup = bcm4377_hci_setup;
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
if (bcm4377->hw->use_bdaddr_property)
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); if (bcm4377->hw->broken_mws_transport_config)
@@ -2465,6 +2467,7 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = { .has_bar0_core2_window2 = true, .broken_mws_transport_config = true, .broken_le_coded = true,
.use_bdaddr_property = true, .send_calibration = bcm4378_send_calibration, .send_ptb = bcm4378_send_ptb, },
@@ -2479,6 +2482,7 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = { .clear_pciecfg_subsystem_ctrl_bit19 = true, .broken_mws_transport_config = true, .broken_le_coded = true,
.use_bdaddr_property = true, .send_calibration = bcm4387_send_calibration, .send_ptb = bcm4378_send_ptb, },
-- 2.43.0
Sorry, excuse me for replying to the wrong message, I got confused by Gmail on what to reply to.
This is fine and thanks for the fix!
Reviewed-by: Neal Gompa neal@gompa.dev
On Mon, Dec 25, 2023 at 03:21:04PM -0500, Felix Zhang wrote:
Starting v6.5, Bluetooth does not work at all on my T2 MacBookAir9,1 with the BCM4377 chip. When I boot up the computer, go into bluetoothctl, and then try to run commands like scan on, show, list, it returns "No default controller available." I have tried reloading the kernel module, in which the log outputs "{Added,Removed} hci0 (unconfigured)." With this patch, I am able to use Bluetooth as normal without any errors regarding hci0 being unconfigured. However, an issue is still present where sometimes hci_bcm4377 will have to be reloaded in order to get bluetooth to work. I believe this was still present before the previously mentioned commit.
I would also like to thank Kerem Karabay kekrby@gmail.com for assisting me with this patch.
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org Signed-off-by: Felix Zhang mrman@mrman314.tech
v4:
- Adjust the format to pass the CI (again).
- Shorten description
As explained here:
https://lore.kernel.org/all/ZYv8tp3fMiAqK8OI@hovoldconsulting.com/
I don't this is necessarily the right fix. The BD_ADDR quirk property should not be set unconditionally but it is still needed for devices that lack storage for a unique device address.
So the following fix is needed either way and is probably all that is needed here:
https://lore.kernel.org/lkml/20231227101003.10534-1-johan+linaro@kernel.org/
Johan
I got it tested by a person and Johan's patch works.
On 27-Dec-2023, at 4:05 PM, Johan Hovold johan@kernel.org wrote:
On Mon, Dec 25, 2023 at 03:21:04PM -0500, Felix Zhang wrote:
Starting v6.5, Bluetooth does not work at all on my T2 MacBookAir9,1 with the BCM4377 chip. When I boot up the computer, go into bluetoothctl, and then try to run commands like scan on, show, list, it returns "No default controller available." I have tried reloading the kernel module, in which the log outputs "{Added,Removed} hci0 (unconfigured)." With this patch, I am able to use Bluetooth as normal without any errors regarding hci0 being unconfigured. However, an issue is still present where sometimes hci_bcm4377 will have to be reloaded in order to get bluetooth to work. I believe this was still present before the previously mentioned commit.
I would also like to thank Kerem Karabay kekrby@gmail.com for assisting me with this patch.
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org Signed-off-by: Felix Zhang mrman@mrman314.tech
v4:
- Adjust the format to pass the CI (again).
- Shorten description
As explained here:
https://lore.kernel.org/all/ZYv8tp3fMiAqK8OI@hovoldconsulting.com/
I don't this is necessarily the right fix. The BD_ADDR quirk property should not be set unconditionally but it is still needed for devices that lack storage for a unique device address.
So the following fix is needed either way and is probably all that is needed here:
https://lore.kernel.org/lkml/20231227101003.10534-1-johan+linaro@kernel.org/
Johan
linux-stable-mirror@lists.linaro.org