From: Grzegorz Jaszczyk jaz@semihalf.com

commit e0d9d30b73548fbfe5c024ed630169bdc9a08aee upstream.

Perform conversion to little-endian before every write to configuration space and convert it back to CPU endianness on reads.

Additionally, initialise every multiple byte field of config space with the cpu_to_le* macro, which is required since the structure describing config space of emulated bridge assumes little-endian convention.

Signed-off-by: Grzegorz Jaszczyk jaz@semihalf.com Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/pci-bridge-emul.c | 25 +++++++------ drivers/pci/pci-bridge-emul.h | 78 +++++++++++++++++++++--------------------- 2 files changed, 52 insertions(+), 51 deletions(-)

--- a/drivers/pci/pci-bridge-emul.c +++ b/drivers/pci/pci-bridge-emul.c @@ -270,10 +270,10 @@ static const struct pci_bridge_reg_behav int pci_bridge_emul_init(struct pci_bridge_emul *bridge, unsigned int flags) { - bridge->conf.class_revision |= PCI_CLASS_BRIDGE_PCI << 16; + bridge->conf.class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16); bridge->conf.header_type = PCI_HEADER_TYPE_BRIDGE; bridge->conf.cache_line_size = 0x10; - bridge->conf.status = PCI_STATUS_CAP_LIST; + bridge->conf.status = cpu_to_le16(PCI_STATUS_CAP_LIST); bridge->pci_regs_behavior = kmemdup(pci_regs_behavior, sizeof(pci_regs_behavior), GFP_KERNEL); @@ -284,8 +284,9 @@ int pci_bridge_emul_init(struct pci_brid bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START; bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP; /* Set PCIe v2, root port, slot support */ - bridge->pcie_conf.cap = PCI_EXP_TYPE_ROOT_PORT << 4 | 2 | - PCI_EXP_FLAGS_SLOT; + bridge->pcie_conf.cap = + cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4 | 2 | + PCI_EXP_FLAGS_SLOT); bridge->pcie_cap_regs_behavior = kmemdup(pcie_cap_regs_behavior, sizeof(pcie_cap_regs_behavior), @@ -327,7 +328,7 @@ int pci_bridge_emul_conf_read(struct pci int reg = where & ~3; pci_bridge_emul_read_status_t (*read_op)(struct pci_bridge_emul *bridge, int reg, u32 *value); - u32 *cfgspace; + __le32 *cfgspace; const struct pci_bridge_reg_behavior *behavior;

if (bridge->has_pcie && reg >= PCI_CAP_PCIE_END) { @@ -343,11 +344,11 @@ int pci_bridge_emul_conf_read(struct pci if (bridge->has_pcie && reg >= PCI_CAP_PCIE_START) { reg -= PCI_CAP_PCIE_START; read_op = bridge->ops->read_pcie; - cfgspace = (u32 *) &bridge->pcie_conf; + cfgspace = (__le32 *) &bridge->pcie_conf; behavior = bridge->pcie_cap_regs_behavior; } else { read_op = bridge->ops->read_base; - cfgspace = (u32 *) &bridge->conf; + cfgspace = (__le32 *) &bridge->conf; behavior = bridge->pci_regs_behavior; }

@@ -357,7 +358,7 @@ int pci_bridge_emul_conf_read(struct pci ret = PCI_BRIDGE_EMUL_NOT_HANDLED;

if (ret == PCI_BRIDGE_EMUL_NOT_HANDLED) - *value = cfgspace[reg / 4]; + *value = le32_to_cpu(cfgspace[reg / 4]);

/* * Make sure we never return any reserved bit with a value @@ -387,7 +388,7 @@ int pci_bridge_emul_conf_write(struct pc int mask, ret, old, new, shift; void (*write_op)(struct pci_bridge_emul *bridge, int reg, u32 old, u32 new, u32 mask); - u32 *cfgspace; + __le32 *cfgspace; const struct pci_bridge_reg_behavior *behavior;

if (bridge->has_pcie && reg >= PCI_CAP_PCIE_END) @@ -414,11 +415,11 @@ int pci_bridge_emul_conf_write(struct pc if (bridge->has_pcie && reg >= PCI_CAP_PCIE_START) { reg -= PCI_CAP_PCIE_START; write_op = bridge->ops->write_pcie; - cfgspace = (u32 *) &bridge->pcie_conf; + cfgspace = (__le32 *) &bridge->pcie_conf; behavior = bridge->pcie_cap_regs_behavior; } else { write_op = bridge->ops->write_base; - cfgspace = (u32 *) &bridge->conf; + cfgspace = (__le32 *) &bridge->conf; behavior = bridge->pci_regs_behavior; }

@@ -431,7 +432,7 @@ int pci_bridge_emul_conf_write(struct pc /* Clear the W1C bits */ new &= ~((value << shift) & (behavior[reg / 4].w1c & mask));

- cfgspace[reg / 4] = new; + cfgspace[reg / 4] = cpu_to_le32(new);

if (write_op) write_op(bridge, reg, old, new, mask); --- a/drivers/pci/pci-bridge-emul.h +++ b/drivers/pci/pci-bridge-emul.h @@ -6,65 +6,65 @@

/* PCI configuration space of a PCI-to-PCI bridge. */ struct pci_bridge_emul_conf { - u16 vendor; - u16 device; - u16 command; - u16 status; - u32 class_revision; + __le16 vendor; + __le16 device; + __le16 command; + __le16 status; + __le32 class_revision; u8 cache_line_size; u8 latency_timer; u8 header_type; u8 bist; - u32 bar[2]; + __le32 bar[2]; u8 primary_bus; u8 secondary_bus; u8 subordinate_bus; u8 secondary_latency_timer; u8 iobase; u8 iolimit; - u16 secondary_status; - u16 membase; - u16 memlimit; - u16 pref_mem_base; - u16 pref_mem_limit; - u32 prefbaseupper; - u32 preflimitupper; - u16 iobaseupper; - u16 iolimitupper; + __le16 secondary_status; + __le16 membase; + __le16 memlimit; + __le16 pref_mem_base; + __le16 pref_mem_limit; + __le32 prefbaseupper; + __le32 preflimitupper; + __le16 iobaseupper; + __le16 iolimitupper; u8 capabilities_pointer; u8 reserve[3]; - u32 romaddr; + __le32 romaddr; u8 intline; u8 intpin; - u16 bridgectrl; + __le16 bridgectrl; };

/* PCI configuration space of the PCIe capabilities */ struct pci_bridge_emul_pcie_conf { u8 cap_id; u8 next; - u16 cap; - u32 devcap; - u16 devctl; - u16 devsta; - u32 lnkcap; - u16 lnkctl; - u16 lnksta; - u32 slotcap; - u16 slotctl; - u16 slotsta; - u16 rootctl; - u16 rsvd; - u32 rootsta; - u32 devcap2; - u16 devctl2; - u16 devsta2; - u32 lnkcap2; - u16 lnkctl2; - u16 lnksta2; - u32 slotcap2; - u16 slotctl2; - u16 slotsta2; + __le16 cap; + __le32 devcap; + __le16 devctl; + __le16 devsta; + __le32 lnkcap; + __le16 lnkctl; + __le16 lnksta; + __le32 slotcap; + __le16 slotctl; + __le16 slotsta; + __le16 rootctl; + __le16 rsvd; + __le32 rootsta; + __le32 devcap2; + __le16 devctl2; + __le16 devsta2; + __le32 lnkcap2; + __le16 lnkctl2; + __le16 lnksta2; + __le32 slotcap2; + __le16 slotctl2; + __le16 slotsta2; };

struct pci_bridge_emul;

From: Pali Rohár pali@kernel.org

commit e902bb7c24a7099d0eb0eb4cba06f2d91e9299f3 upstream.

The 16-bit Root Capabilities register is at offset 0x1e in the PCIe Capability. Rename current 'rsvd' struct member to 'rootcap'.

Link: https://lore.kernel.org/r/20210722144041.12661-4-pali@kernel.org Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Marek Behún kabel@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/pci-bridge-emul.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/pci-bridge-emul.h +++ b/drivers/pci/pci-bridge-emul.h @@ -54,7 +54,7 @@ struct pci_bridge_emul_pcie_conf { __le16 slotctl; __le16 slotsta; __le16 rootctl; - __le16 rsvd; + __le16 rootcap; __le32 rootsta; __le32 devcap2; __le16 devctl2;

From: Tuan Phan tuanphan@os.amperecomputing.com

commit 877c1a5f79c6984bbe3f2924234c08e2f4f1acd5 upstream.

Ampere Altra SOC supports only 32-bit ECAM reads. Add an MCFG quirk for the platform.

Link: https://lore.kernel.org/r/1596751055-12316-1-git-send-email-tuanphan@os.ampe... Signed-off-by: Tuan Phan tuanphan@os.amperecomputing.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com [ dannf: backport drops const qualifier from pci_32b_read_ops for consistency with the other quirks that weren't yet constified in v5.4 ] Signed-off-by: dann frazier dann.frazier@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/acpi/pci_mcfg.c | 20 ++++++++++++++++++++ drivers/pci/ecam.c | 10 ++++++++++ include/linux/pci-ecam.h | 1 + 3 files changed, 31 insertions(+)

--- a/drivers/acpi/pci_mcfg.c +++ b/drivers/acpi/pci_mcfg.c @@ -142,6 +142,26 @@ static struct mcfg_fixup mcfg_quirks[] = XGENE_V2_ECAM_MCFG(4, 0), XGENE_V2_ECAM_MCFG(4, 1), XGENE_V2_ECAM_MCFG(4, 2), + +#define ALTRA_ECAM_QUIRK(rev, seg) \ + { "Ampere", "Altra ", rev, seg, MCFG_BUS_ANY, &pci_32b_read_ops } + + ALTRA_ECAM_QUIRK(1, 0), + ALTRA_ECAM_QUIRK(1, 1), + ALTRA_ECAM_QUIRK(1, 2), + ALTRA_ECAM_QUIRK(1, 3), + ALTRA_ECAM_QUIRK(1, 4), + ALTRA_ECAM_QUIRK(1, 5), + ALTRA_ECAM_QUIRK(1, 6), + ALTRA_ECAM_QUIRK(1, 7), + ALTRA_ECAM_QUIRK(1, 8), + ALTRA_ECAM_QUIRK(1, 9), + ALTRA_ECAM_QUIRK(1, 10), + ALTRA_ECAM_QUIRK(1, 11), + ALTRA_ECAM_QUIRK(1, 12), + ALTRA_ECAM_QUIRK(1, 13), + ALTRA_ECAM_QUIRK(1, 14), + ALTRA_ECAM_QUIRK(1, 15), };

static char mcfg_oem_id[ACPI_OEM_ID_SIZE]; --- a/drivers/pci/ecam.c +++ b/drivers/pci/ecam.c @@ -164,4 +164,14 @@ struct pci_ecam_ops pci_32b_ops = { .write = pci_generic_config_write32, } }; + +/* ECAM ops for 32-bit read only (non-compliant) */ +struct pci_ecam_ops pci_32b_read_ops = { + .bus_shift = 20, + .pci_ops = { + .map_bus = pci_ecam_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write, + } +}; #endif --- a/include/linux/pci-ecam.h +++ b/include/linux/pci-ecam.h @@ -51,6 +51,7 @@ extern struct pci_ecam_ops pci_generic_e

#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) extern struct pci_ecam_ops pci_32b_ops; /* 32-bit accesses only */ +extern struct pci_ecam_ops pci_32b_read_ops; /* 32-bit read only */ extern struct pci_ecam_ops hisi_pcie_ops; /* HiSilicon */ extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */ extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */

From: nick black dankamongmen@gmail.com

commit 3a2b2eb55681158d3e3ef464fbf47574cf0c517c upstream.

The Linux console's VT102 implementation already consumes OSC ("Operating System Command") sequences, probably because that's how palette changes are transmitted.

In addition to OSC, there are three other major clases of ANSI control strings: APC ("Application Program Command"), PM ("Privacy Message"), and DCS ("Device Control String"). They are handled similarly to OSC in terms of termination.

Source: vt100.net

Add three new enumerated states, one for each of these types. All three are handled the same way right now--they simply consume input until terminated. I hope to expand upon this firmament in the future. Add new predicate ansi_control_string(), returning true for any of these states. Replace explicit checks against ESosc with calls to this function. Transition to these states appropriately from the escape initiation (ESesc) state.

This was motivated by the following Notcurses bugs:

https://github.com/dankamongmen/notcurses/issues/2050 https://github.com/dankamongmen/notcurses/issues/1828 https://github.com/dankamongmen/notcurses/issues/2069

where standard VT sequences are not consumed by the Linux console. It's not necessary that the Linux console *support* these sequences, but it ought *consume* these well-specified classes of sequences.

Tested by sending a variety of escape sequences to the console, and verifying that they still worked, or were now properly consumed. Verified that the escapes were properly terminated at a generic level. Verified that the Notcurses tools continued to show expected output on the Linux console, except now without escape bleedthrough.

Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/ Signed-off-by: nick black dankamongmen@gmail.com Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Jiri Slaby jirislaby@kernel.org Cc: Tetsuo Handa penguin-kernel@i-love.sakura.ne.jp Cc: Daniel Vetter daniel.vetter@ffwll.ch Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/vt/vt.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-)

--- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2070,7 +2070,7 @@ static void restore_cur(struct vc_data *

enum { ESnormal, ESesc, ESsquare, ESgetpars, ESfunckey, EShash, ESsetG0, ESsetG1, ESpercent, EScsiignore, ESnonstd, - ESpalette, ESosc }; + ESpalette, ESosc, ESapc, ESpm, ESdcs };

/* console_lock is held (except via vc_init()) */ static void reset_terminal(struct vc_data *vc, int do_clear) @@ -2124,20 +2124,28 @@ static void reset_terminal(struct vc_dat csi_J(vc, 2); }

+/* is this state an ANSI control string? */ +static bool ansi_control_string(unsigned int state) +{ + if (state == ESosc || state == ESapc || state == ESpm || state == ESdcs) + return true; + return false; +} + /* console_lock is held */ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) { /* * Control characters can be used in the _middle_ - * of an escape sequence. + * of an escape sequence, aside from ANSI control strings. */ - if (vc->vc_state == ESosc && c>=8 && c<=13) /* ... except for OSC */ + if (ansi_control_string(vc->vc_state) && c >= 8 && c <= 13) return; switch (c) { case 0: return; case 7: - if (vc->vc_state == ESosc) + if (ansi_control_string(vc->vc_state)) vc->vc_state = ESnormal; else if (vc->vc_bell_duration) kd_mksound(vc->vc_bell_pitch, vc->vc_bell_duration); @@ -2196,6 +2204,12 @@ static void do_con_trol(struct tty_struc case ']': vc->vc_state = ESnonstd; return; + case '_': + vc->vc_state = ESapc; + return; + case '^': + vc->vc_state = ESpm; + return; case '%': vc->vc_state = ESpercent; return; @@ -2212,6 +2226,9 @@ static void do_con_trol(struct tty_struc case 'H': vc->vc_tab_stop[7 & (vc->vc_x >> 5)] |= (1 << (vc->vc_x & 31)); return; + case 'P': + vc->vc_state = ESdcs; + return; case 'Z': respond_ID(tty); return; @@ -2531,8 +2548,14 @@ static void do_con_trol(struct tty_struc vc->vc_translate = set_translate(vc->vc_G1_charset, vc); vc->vc_state = ESnormal; return; + case ESapc: + return; case ESosc: return; + case ESpm: + return; + case ESdcs: + return; default: vc->vc_state = ESnormal; }

From: Florian Fainelli f.fainelli@gmail.com

commit fcf044891c84e38fc90eb736b818781bccf94e38 upstream.

We do not need a SWIOTLB unless we have DRAM that is addressable beyond the arm_dma_limit. Compare max_pfn with arm_dma_pfn_limit to determine whether we do need a SWIOTLB to be initialized.

Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Konrad Rzeszutek Wilk konrad.wilk@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/mm/init.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -469,7 +469,11 @@ static void __init free_highpages(void) void __init mem_init(void) { #ifdef CONFIG_ARM_LPAE - swiotlb_init(1); + if (swiotlb_force == SWIOTLB_FORCE || + max_pfn > arm_dma_pfn_limit) + swiotlb_init(1); + else + swiotlb_force = SWIOTLB_NO_FORCE; #endif

set_max_mapnr(pfn_to_page(max_pfn) - mem_map);

From: Alex Sverdlin alexander.sverdlin@nokia.com

commit 4e271701c17dee70c6e1351c4d7d42e70405c6a9 upstream

No functional change, later it will be re-used in several files.

Signed-off-by: Alexander Sverdlin alexander.sverdlin@nokia.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/include/asm/module.h | 9 +++++++++ arch/arm/kernel/module-plts.c | 9 --------- 2 files changed, 9 insertions(+), 9 deletions(-)

--- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -19,6 +19,15 @@ enum { }; #endif

+#define PLT_ENT_STRIDE L1_CACHE_BYTES +#define PLT_ENT_COUNT (PLT_ENT_STRIDE / sizeof(u32)) +#define PLT_ENT_SIZE (sizeof(struct plt_entries) / PLT_ENT_COUNT) + +struct plt_entries { + u32 ldr[PLT_ENT_COUNT]; + u32 lit[PLT_ENT_COUNT]; +}; + struct mod_plt_sec { struct elf32_shdr *plt; int plt_count; --- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -11,10 +11,6 @@ #include <asm/cache.h> #include <asm/opcodes.h>

-#define PLT_ENT_STRIDE L1_CACHE_BYTES -#define PLT_ENT_COUNT (PLT_ENT_STRIDE / sizeof(u32)) -#define PLT_ENT_SIZE (sizeof(struct plt_entries) / PLT_ENT_COUNT) - #ifdef CONFIG_THUMB2_KERNEL #define PLT_ENT_LDR __opcode_to_mem_thumb32(0xf8dff000 | \ (PLT_ENT_STRIDE - 4)) @@ -23,11 +19,6 @@ (PLT_ENT_STRIDE - 8)) #endif

-struct plt_entries { - u32 ldr[PLT_ENT_COUNT]; - u32 lit[PLT_ENT_COUNT]; -}; - static bool in_init(const struct module *mod, unsigned long loc) { return loc - (u32)mod->init_layout.base < mod->init_layout.size;

From: Alex Sverdlin alexander.sverdlin@nokia.com

commit 79f32b221b18c15a98507b101ef4beb52444cc6f upstream

Teach ftrace_make_call() and ftrace_make_nop() about PLTs. Teach PLT code about FTRACE and all its callbacks. Otherwise the following might happen:

------------[ cut here ]------------ WARNING: CPU: 14 PID: 2265 at .../arch/arm/kernel/insn.c:14 __arm_gen_branch+0x83/0x8c() ... Hardware name: LSI Axxia AXM55XX [<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8) [<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90) [<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c) [<c03218f3>] (warn_slowpath_null) from [<c03143cf>] (__arm_gen_branch+0x83/0x8c) [<c03143cf>] (__arm_gen_branch) from [<c0314337>] (ftrace_make_nop+0xf/0x24) [<c0314337>] (ftrace_make_nop) from [<c038ebcb>] (ftrace_process_locs+0x27b/0x3e8) [<c038ebcb>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44) [<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84) [<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18) ---[ end trace e1b64ced7a89adcc ]--- ------------[ cut here ]------------ WARNING: CPU: 14 PID: 2265 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1b1/0x234() ... Hardware name: LSI Axxia AXM55XX [<c0314a49>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c0519f51>] (dump_stack+0x81/0xa8) [<c0519f51>] (dump_stack) from [<c032185d>] (warn_slowpath_common+0x69/0x90) [<c032185d>] (warn_slowpath_common) from [<c03218f3>] (warn_slowpath_null+0x17/0x1c) [<c03218f3>] (warn_slowpath_null) from [<c038e87d>] (ftrace_bug+0x1b1/0x234) [<c038e87d>] (ftrace_bug) from [<c038ebd5>] (ftrace_process_locs+0x285/0x3e8) [<c038ebd5>] (ftrace_process_locs) from [<c0378d79>] (load_module+0x11e9/0x1a44) [<c0378d79>] (load_module) from [<c037974d>] (SyS_finit_module+0x59/0x84) [<c037974d>] (SyS_finit_module) from [<c030e981>] (ret_fast_syscall+0x1/0x18) ---[ end trace e1b64ced7a89adcd ]--- ftrace failed to modify [<e9ef7006>] 0xe9ef7006 actual: 02:f0:3b:fa ftrace record flags: 0 (0) expected tramp: c0314265

Signed-off-by: Alexander Sverdlin alexander.sverdlin@nokia.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/include/asm/ftrace.h | 3 ++ arch/arm/include/asm/module.h | 1 arch/arm/kernel/ftrace.c | 46 ++++++++++++++++++++++++++++++++++-------- arch/arm/kernel/module-plts.c | 44 ++++++++++++++++++++++++++++++++++++---- 4 files changed, 82 insertions(+), 12 deletions(-)

--- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -16,6 +16,9 @@ extern void __gnu_mcount_nc(void);

#ifdef CONFIG_DYNAMIC_FTRACE struct dyn_arch_ftrace { +#ifdef CONFIG_ARM_MODULE_PLTS + struct module *mod; +#endif };

static inline unsigned long ftrace_call_adjust(unsigned long addr) --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -30,6 +30,7 @@ struct plt_entries {

struct mod_plt_sec { struct elf32_shdr *plt; + struct plt_entries *plt_ent; int plt_count; };

--- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -71,9 +71,10 @@ int ftrace_arch_code_modify_post_process return 0; }

-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr, + bool warn) { - return arm_gen_branch_link(pc, addr, true); + return arm_gen_branch_link(pc, addr, warn); }

static int ftrace_modify_code(unsigned long pc, unsigned long old, @@ -112,14 +113,14 @@ int ftrace_update_ftrace_func(ftrace_fun int ret;

pc = (unsigned long)&ftrace_call; - new = ftrace_call_replace(pc, (unsigned long)func); + new = ftrace_call_replace(pc, (unsigned long)func, true);

ret = ftrace_modify_code(pc, 0, new, false);

#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS if (!ret) { pc = (unsigned long)&ftrace_regs_call; - new = ftrace_call_replace(pc, (unsigned long)func); + new = ftrace_call_replace(pc, (unsigned long)func, true);

ret = ftrace_modify_code(pc, 0, new, false); } @@ -132,10 +133,22 @@ int ftrace_make_call(struct dyn_ftrace * { unsigned long new, old; unsigned long ip = rec->ip; + unsigned long aaddr = adjust_address(rec, addr); + struct module *mod = NULL; + +#ifdef CONFIG_ARM_MODULE_PLTS + mod = rec->arch.mod; +#endif

old = ftrace_nop_replace(rec);

- new = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_call_replace(ip, aaddr, !mod); +#ifdef CONFIG_ARM_MODULE_PLTS + if (!new && mod) { + aaddr = get_module_plt(mod, ip, aaddr); + new = ftrace_call_replace(ip, aaddr, true); + } +#endif

return ftrace_modify_code(rec->ip, old, new, true); } @@ -148,9 +161,9 @@ int ftrace_modify_call(struct dyn_ftrace unsigned long new, old; unsigned long ip = rec->ip;

- old = ftrace_call_replace(ip, adjust_address(rec, old_addr)); + old = ftrace_call_replace(ip, adjust_address(rec, old_addr), true);

- new = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_call_replace(ip, adjust_address(rec, addr), true);

return ftrace_modify_code(rec->ip, old, new, true); } @@ -160,12 +173,29 @@ int ftrace_modify_call(struct dyn_ftrace int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr) { + unsigned long aaddr = adjust_address(rec, addr); unsigned long ip = rec->ip; unsigned long old; unsigned long new; int ret;

- old = ftrace_call_replace(ip, adjust_address(rec, addr)); +#ifdef CONFIG_ARM_MODULE_PLTS + /* mod is only supplied during module loading */ + if (!mod) + mod = rec->arch.mod; + else + rec->arch.mod = mod; +#endif + + old = ftrace_call_replace(ip, aaddr, + !IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || !mod); +#ifdef CONFIG_ARM_MODULE_PLTS + if (!old && mod) { + aaddr = get_module_plt(mod, ip, aaddr); + old = ftrace_call_replace(ip, aaddr, true); + } +#endif + new = ftrace_nop_replace(rec); ret = ftrace_modify_code(ip, old, new, true);

--- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -4,6 +4,7 @@ */

#include <linux/elf.h> +#include <linux/ftrace.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/sort.h> @@ -19,19 +20,52 @@ (PLT_ENT_STRIDE - 8)) #endif

+static const u32 fixed_plts[] = { +#ifdef CONFIG_FUNCTION_TRACER + FTRACE_ADDR, + MCOUNT_ADDR, +#endif +}; + static bool in_init(const struct module *mod, unsigned long loc) { return loc - (u32)mod->init_layout.base < mod->init_layout.size; }

+static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt) +{ + int i; + + if (!ARRAY_SIZE(fixed_plts) || pltsec->plt_count) + return; + pltsec->plt_count = ARRAY_SIZE(fixed_plts); + + for (i = 0; i < ARRAY_SIZE(plt->ldr); ++i) + plt->ldr[i] = PLT_ENT_LDR; + + BUILD_BUG_ON(sizeof(fixed_plts) > sizeof(plt->lit)); + memcpy(plt->lit, fixed_plts, sizeof(fixed_plts)); +} + u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val) { struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core : &mod->arch.init; + struct plt_entries *plt; + int idx; + + /* cache the address, ELF header is available only during module load */ + if (!pltsec->plt_ent) + pltsec->plt_ent = (struct plt_entries *)pltsec->plt->sh_addr; + plt = pltsec->plt_ent;

- struct plt_entries *plt = (struct plt_entries *)pltsec->plt->sh_addr; - int idx = 0; + prealloc_fixed(pltsec, plt); + + for (idx = 0; idx < ARRAY_SIZE(fixed_plts); ++idx) + if (plt->lit[idx] == val) + return (u32)&plt->ldr[idx];

+ idx = 0; /* * Look for an existing entry pointing to 'val'. Given that the * relocations are sorted, this will be the last entry we allocated. @@ -179,8 +213,8 @@ static unsigned int count_plts(const Elf int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, char *secstrings, struct module *mod) { - unsigned long core_plts = 0; - unsigned long init_plts = 0; + unsigned long core_plts = ARRAY_SIZE(fixed_plts); + unsigned long init_plts = ARRAY_SIZE(fixed_plts); Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum; Elf32_Sym *syms = NULL;

@@ -235,6 +269,7 @@ int module_frob_arch_sections(Elf_Ehdr * mod->arch.core.plt->sh_size = round_up(core_plts * PLT_ENT_SIZE, sizeof(struct plt_entries)); mod->arch.core.plt_count = 0; + mod->arch.core.plt_ent = NULL;

mod->arch.init.plt->sh_type = SHT_NOBITS; mod->arch.init.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC; @@ -242,6 +277,7 @@ int module_frob_arch_sections(Elf_Ehdr * mod->arch.init.plt->sh_size = round_up(init_plts * PLT_ENT_SIZE, sizeof(struct plt_entries)); mod->arch.init.plt_count = 0; + mod->arch.init.plt_ent = NULL;

pr_debug("%s: plt=%x, init.plt=%x\n", __func__, mod->arch.core.plt->sh_size, mod->arch.init.plt->sh_size);

From: Marcelo Ricardo Leitner marcelo.leitner@gmail.com

commit b6ffe7671b24689c09faa5675dd58f93758a97ae upstream.

In one of the fallbacks that SCTP has for identifying an association for an incoming packet, it looks for AddIp chunk (from ASCONF) and take a peek. Thing is, at this stage nothing was validating that the chunk actually had enough content for that, allowing the peek to happen over uninitialized memory.

Similar check already exists in actual asconf handling in sctp_verify_asconf().

Signed-off-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sctp/input.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -1168,6 +1168,9 @@ static struct sctp_association *__sctp_r union sctp_addr_param *param; union sctp_addr paddr;

+ if (ntohs(ch->length) < sizeof(*asconf) + sizeof(struct sctp_paramhdr)) + return NULL; + /* Skip over the ADDIP header and find the Address parameter */ param = (union sctp_addr_param *)(asconf + 1);

From: Nathan Chancellor nathan@kernel.org

commit 099ec97ac92911abfb102bb5c68ed270fc12e0dd upstream.

clang warns:

drivers/staging/rtl8192u/r8192U_core.c:4268:20: warning: bitwise and of boolean expressions; did you mean logical and? [-Wbool-operation-and] bpacket_toself = bpacket_match_bssid & ^~~~~~~~~~~~~~~~~~~~~ && 1 warning generated.

Replace the bitwise AND with a logical one to clear up the warning, as that is clearly what was intended.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by: Nathan Chancellor nathan@kernel.org Link: https://lore.kernel.org/r/20210814235625.1780033-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/staging/rtl8192u/r8192U_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -4338,7 +4338,7 @@ static void TranslateRxSignalStuff819xUs bpacket_match_bssid = (type != IEEE80211_FTYPE_CTL) && (ether_addr_equal(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS) ? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS) ? hdr->addr2 : hdr->addr3)) && (!pstats->bHwError) && (!pstats->bCRC) && (!pstats->bICV); - bpacket_toself = bpacket_match_bssid & + bpacket_toself = bpacket_match_bssid && (ether_addr_equal(praddr, priv->ieee80211->dev->dev_addr));

if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BEACON)

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream.

Currently the CRST parsing relies on the fact that on most of x86 devices the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for some. Fix this by converting GSI to Linux vIRQ before checking it.

Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.int... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/dma/acpi-dma.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/dma/acpi-dma.c +++ b/drivers/dma/acpi-dma.c @@ -70,10 +70,14 @@ static int acpi_dma_parse_resource_group

si = (const struct acpi_csrt_shared_info *)&grp[1];

- /* Match device by MMIO and IRQ */ + /* Match device by MMIO */ if (si->mmio_base_low != lower_32_bits(mem) || - si->mmio_base_high != upper_32_bits(mem) || - si->gsi_interrupt != irq) + si->mmio_base_high != upper_32_bits(mem)) + return 0; + + /* Match device by Linux vIRQ */ + ret = acpi_register_gsi(NULL, si->gsi_interrupt, si->interrupt_mode, si->interrupt_polarity); + if (ret != irq) return 0;

dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",

From: Xie Yongji xieyongji@bytedance.com

commit f997ea3b7afc108eb9761f321b57de2d089c7c48 upstream.

This ensures we don't leak the sysfs file if we failed to allocate chan->vc_wq during probe.

Link: http://lkml.kernel.org/r/20210517083557.172-1-xieyongji@bytedance.com Fixes: 86c8437383ac ("net/9p: Add sysfs mount_tag file for virtio 9P device") Signed-off-by: Xie Yongji xieyongji@bytedance.com Signed-off-by: Dominique Martinet asmadeus@codewreck.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/9p/trans_virtio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -605,7 +605,7 @@ static int p9_virtio_probe(struct virtio chan->vc_wq = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL); if (!chan->vc_wq) { err = -ENOMEM; - goto out_free_tag; + goto out_remove_file; } init_waitqueue_head(chan->vc_wq); chan->ring_bufs_avail = 1; @@ -623,6 +623,8 @@ static int p9_virtio_probe(struct virtio

return 0;

+out_remove_file: + sysfs_remove_file(&vdev->dev.kobj, &dev_attr_mount_tag.attr); out_free_tag: kfree(tag); out_free_vq:

From: Zhen Lei thunder.leizhen@huawei.com

commit 98e2e409e76ef7781d8511f997359e9c504a95c1 upstream.

When the refcount is decreased to 0, the resource reclamation branch is entered. Before CPU0 reaches the race point (1), CPU1 may obtain the spinlock and traverse the rbtree to find 'root', see nilfs_lookup_root().

Although CPU1 will call refcount_inc() to increase the refcount, it is obviously too late. CPU0 will release 'root' directly, CPU1 then accesses 'root' and triggers UAF.

Use refcount_dec_and_lock() to ensure that both the operations of decrease refcount to 0 and link deletion are lock protected eliminates this risk.

CPU0 CPU1 nilfs_put_root(): <-------- (1) spin_lock(&nilfs->ns_cptree_lock); rb_erase(&root->rb_node, &nilfs->ns_cptree); spin_unlock(&nilfs->ns_cptree_lock);

kfree(root); <-------- use-after-free

refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 9476 at lib/refcount.c:28 \ refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 Modules linked in: CPU: 2 PID: 9476 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... RIP: 0010:refcount_warn_saturate+0x1cf/0x210 lib/refcount.c:28 ... ... Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] nilfs_put_root+0xc1/0xd0 fs/nilfs2/the_nilfs.c:795 nilfs_segctor_destroy fs/nilfs2/segment.c:2749 [inline] nilfs_detach_log_writer+0x3fa/0x570 fs/nilfs2/segment.c:2812 nilfs_put_super+0x2f/0xf0 fs/nilfs2/super.c:467 generic_shutdown_super+0xcd/0x1f0 fs/super.c:464 kill_block_super+0x4a/0x90 fs/super.c:1446 deactivate_locked_super+0x6a/0xb0 fs/super.c:335 deactivate_super+0x85/0x90 fs/super.c:366 cleanup_mnt+0x277/0x2e0 fs/namespace.c:1118 __cleanup_mnt+0x15/0x20 fs/namespace.c:1125 task_work_run+0x8e/0x110 kernel/task_work.c:151 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:164 [inline] exit_to_user_mode_prepare+0x13c/0x170 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266 do_syscall_64+0x45/0x80 arch/x86/entry/common.c:56 entry_SYSCALL_64_after_hwframe+0x44/0xa9

There is no reproduction program, and the above is only theoretical analysis.

Link: https://lkml.kernel.org/r/1629859428-5906-1-git-send-email-konishi.ryusuke@g... Fixes: ba65ae4729bf ("nilfs2: add checkpoint tree to nilfs object") Link: https://lkml.kernel.org/r/20210723012317.4146-1-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei thunder.leizhen@huawei.com Signed-off-by: Ryusuke Konishi konishi.ryusuke@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/nilfs2/the_nilfs.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/fs/nilfs2/the_nilfs.c +++ b/fs/nilfs2/the_nilfs.c @@ -797,14 +797,13 @@ nilfs_find_or_create_root(struct the_nil

void nilfs_put_root(struct nilfs_root *root) { - if (refcount_dec_and_test(&root->count)) { - struct the_nilfs *nilfs = root->nilfs; + struct the_nilfs *nilfs = root->nilfs;

- nilfs_sysfs_delete_snapshot_group(root); - - spin_lock(&nilfs->ns_cptree_lock); + if (refcount_dec_and_lock(&root->count, &nilfs->ns_cptree_lock)) { rb_erase(&root->rb_node, &nilfs->ns_cptree); spin_unlock(&nilfs->ns_cptree_lock); + + nilfs_sysfs_delete_snapshot_group(root); iput(root->ifile);

kfree(root);

From: Uwe Kleine-König u.kleine-koenig@pengutronix.de

commit 3d2813fb17e5fd0d73c1d1442ca0192bde4af10e upstream.

This fixes a race condition: After pwmchip_add() is called there might already be a consumer and then modifying the hardware behind the consumer's back is bad. So set the default before.

(Side-note: I don't know what this register setting actually does, if this modifies the polarity there is an inconsistency because the inversed polarity isn't considered if the PWM is already running during .probe().)

Fixes: acfd92fdfb93 ("pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value") Cc: Sylvain Lemieux slemieux@tycoint.com Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pwm/pwm-lpc32xx.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/pwm/pwm-lpc32xx.c +++ b/drivers/pwm/pwm-lpc32xx.c @@ -120,17 +120,17 @@ static int lpc32xx_pwm_probe(struct plat lpc32xx->chip.npwm = 1; lpc32xx->chip.base = -1;

+ /* If PWM is disabled, configure the output to the default value */ + val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2)); + val &= ~PWM_PIN_LEVEL; + writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2)); + ret = pwmchip_add(&lpc32xx->chip); if (ret < 0) { dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret); return ret; }

- /* When PWM is disable, configure the output to the default value */ - val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2)); - val &= ~PWM_PIN_LEVEL; - writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2)); - platform_set_drvdata(pdev, lpc32xx);

return 0;

From: Petr Oros poros@redhat.com

commit e96bd2d3b1f83170d1d5c1a99e439b39a22a5b58 upstream.

commit 93c0970493c71f ("net: phy: consider latched link-down status in polling mode") removed double-read of latched link-state register for polling mode from genphy_update_link(). This added extra ~1s delay into sequence link down->up. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up. In phy_state_machine is checked link state but it is latched "link is down". The state machine is scheduled after one second and there is detected "link is up". This extra delay can be avoided when we keep link-state register double read in case when link was down previously.

With this solution we don't miss a link-down event in polling mode and link-up is faster.

Details about this quirky behavior on Realtek phy: Without patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), here i read link-down (BMSR_LSTATUS==0), T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), up-to-date link-up is read (BMSR_LSTATUS==1), phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING

With patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING

Signed-off-by: Petr Oros poros@redhat.com Reviewed-by: Heiner Kallweit hkallweit1@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Cc: Macpaul Lin macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/phy-c45.c | 5 +++-- drivers/net/phy/phy_device.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -239,9 +239,10 @@ int genphy_c45_read_link(struct phy_devi

/* The link state is latched low so that momentary link * drops can be detected. Do not double-read the status - * in polling mode to detect such short link drops. + * in polling mode to detect such short link drops except + * the link was already down. */ - if (!phy_polling_mode(phydev)) { + if (!phy_polling_mode(phydev) || !phydev->link) { val = phy_read_mmd(phydev, devad, MDIO_STAT1); if (val < 0) return val; --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1766,9 +1766,10 @@ int genphy_update_link(struct phy_device

/* The link state is latched low so that momentary link * drops can be detected. Do not double-read the status - * in polling mode to detect such short link drops. + * in polling mode to detect such short link drops except + * the link was already down. */ - if (!phy_polling_mode(phydev)) { + if (!phy_polling_mode(phydev) || !phydev->link) { status = phy_read(phydev, MII_BMSR); if (status < 0) return status;

From: Lukas Bulwahn lukas.bulwahn@gmail.com

[ Upstream commit 6fe26259b4884b657cbc233fb9cdade9d704976e ]

Commit 05a4a9527931 ("kernel/watchdog: split up config options") adds a new config HARDLOCKUP_DETECTOR, which selects the non-existing config HARDLOCKUP_DETECTOR_ARCH.

Hence, ./scripts/checkkconfigsymbols.py warns:

HARDLOCKUP_DETECTOR_ARCH Referencing files: lib/Kconfig.debug

Simply drop selecting the non-existing HARDLOCKUP_DETECTOR_ARCH.

Link: https://lkml.kernel.org/r/20210806115618.22088-1-lukas.bulwahn@gmail.com Fixes: 05a4a9527931 ("kernel/watchdog: split up config options") Signed-off-by: Lukas Bulwahn lukas.bulwahn@gmail.com Cc: Nicholas Piggin npiggin@gmail.com Cc: Masahiro Yamada masahiroy@kernel.org Cc: Babu Moger babu.moger@oracle.com Cc: Don Zickus dzickus@redhat.com Cc: Randy Dunlap rdunlap@infradead.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/Kconfig.debug | 1 - 1 file changed, 1 deletion(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index ee00c6c8a373..a846f03901db 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -868,7 +868,6 @@ config HARDLOCKUP_DETECTOR depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_ARCH select LOCKUP_DETECTOR select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF - select HARDLOCKUP_DETECTOR_ARCH if HAVE_HARDLOCKUP_DETECTOR_ARCH help Say Y here to enable the kernel to act as a watchdog to detect hard lockups.

From: Thomas Gleixner tglx@linutronix.de

[ Upstream commit 4b92d4add5f6dcf21275185c997d6ecb800054cd ]

DEFINE_SMP_CALL_CACHE_FUNCTION() was usefel before the CPU hotplug rework to ensure that the cache related functions are called on the upcoming CPU because the notifier itself could run on any online CPU.

The hotplug state machine guarantees that the callbacks are invoked on the upcoming CPU. So there is no need to have this SMP function call obfuscation. That indirection was missed when the hotplug notifiers were converted.

This also solves the problem of ARM64 init_cache_level() invoking ACPI functions which take a semaphore in that context. That's invalid as SMP function calls run with interrupts disabled. Running it just from the callback in context of the CPU hotplug thread solves this.

Fixes: 8571890e1513 ("arm64: Add support for ACPI based firmware tables") Reported-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Guenter Roeck linux@roeck-us.net Acked-by: Will Deacon will@kernel.org Acked-by: Peter Zijlstra peterz@infradead.org Link: https://lore.kernel.org/r/871r69ersb.ffs@tglx Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/cacheinfo.c | 7 ++----- arch/mips/kernel/cacheinfo.c | 7 ++----- arch/riscv/kernel/cacheinfo.c | 7 ++----- arch/x86/kernel/cpu/cacheinfo.c | 7 ++----- include/linux/cacheinfo.h | 18 ------------------ 5 files changed, 8 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c index 7fa6828bb488..587543c6c51c 100644 --- a/arch/arm64/kernel/cacheinfo.c +++ b/arch/arm64/kernel/cacheinfo.c @@ -43,7 +43,7 @@ static void ci_leaf_init(struct cacheinfo *this_leaf, this_leaf->type = type; }

-static int __init_cache_level(unsigned int cpu) +int init_cache_level(unsigned int cpu) { unsigned int ctype, level, leaves, fw_level; struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); @@ -78,7 +78,7 @@ static int __init_cache_level(unsigned int cpu) return 0; }

-static int __populate_cache_leaves(unsigned int cpu) +int populate_cache_leaves(unsigned int cpu) { unsigned int level, idx; enum cache_type type; @@ -97,6 +97,3 @@ static int __populate_cache_leaves(unsigned int cpu) } return 0; } - -DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level) -DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves) diff --git a/arch/mips/kernel/cacheinfo.c b/arch/mips/kernel/cacheinfo.c index 47312c529410..529dab855aac 100644 --- a/arch/mips/kernel/cacheinfo.c +++ b/arch/mips/kernel/cacheinfo.c @@ -17,7 +17,7 @@ do { \ leaf++; \ } while (0)

-static int __init_cache_level(unsigned int cpu) +int init_cache_level(unsigned int cpu) { struct cpuinfo_mips *c = &current_cpu_data; struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); @@ -69,7 +69,7 @@ static void fill_cpumask_cluster(int cpu, cpumask_t *cpu_map) cpumask_set_cpu(cpu1, cpu_map); }

-static int __populate_cache_leaves(unsigned int cpu) +int populate_cache_leaves(unsigned int cpu) { struct cpuinfo_mips *c = &current_cpu_data; struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); @@ -98,6 +98,3 @@ static int __populate_cache_leaves(unsigned int cpu)

return 0; } - -DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level) -DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves) diff --git a/arch/riscv/kernel/cacheinfo.c b/arch/riscv/kernel/cacheinfo.c index 4c90c07d8c39..d930bd073b7b 100644 --- a/arch/riscv/kernel/cacheinfo.c +++ b/arch/riscv/kernel/cacheinfo.c @@ -16,7 +16,7 @@ static void ci_leaf_init(struct cacheinfo *this_leaf, this_leaf->type = type; }

-static int __init_cache_level(unsigned int cpu) +int init_cache_level(unsigned int cpu) { struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); struct device_node *np = of_cpu_device_node_get(cpu); @@ -58,7 +58,7 @@ static int __init_cache_level(unsigned int cpu) return 0; }

-static int __populate_cache_leaves(unsigned int cpu) +int populate_cache_leaves(unsigned int cpu) { struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); struct cacheinfo *this_leaf = this_cpu_ci->info_list; @@ -95,6 +95,3 @@ static int __populate_cache_leaves(unsigned int cpu)

return 0; } - -DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level) -DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves) diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c index 30f33b75209a..cae566567e15 100644 --- a/arch/x86/kernel/cpu/cacheinfo.c +++ b/arch/x86/kernel/cpu/cacheinfo.c @@ -985,7 +985,7 @@ static void ci_leaf_init(struct cacheinfo *this_leaf, this_leaf->priv = base->nb; }

-static int __init_cache_level(unsigned int cpu) +int init_cache_level(unsigned int cpu) { struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);

@@ -1014,7 +1014,7 @@ static void get_cache_id(int cpu, struct _cpuid4_info_regs *id4_regs) id4_regs->id = c->apicid >> index_msb; }

-static int __populate_cache_leaves(unsigned int cpu) +int populate_cache_leaves(unsigned int cpu) { unsigned int idx, ret; struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); @@ -1033,6 +1033,3 @@ static int __populate_cache_leaves(unsigned int cpu)

return 0; } - -DEFINE_SMP_CALL_CACHE_FUNCTION(init_cache_level) -DEFINE_SMP_CALL_CACHE_FUNCTION(populate_cache_leaves) diff --git a/include/linux/cacheinfo.h b/include/linux/cacheinfo.h index 46b92cd61d0c..c8c71eea237d 100644 --- a/include/linux/cacheinfo.h +++ b/include/linux/cacheinfo.h @@ -78,24 +78,6 @@ struct cpu_cacheinfo { bool cpu_map_populated; };

-/* - * Helpers to make sure "func" is executed on the cpu whose cache - * attributes are being detected - */ -#define DEFINE_SMP_CALL_CACHE_FUNCTION(func) \ -static inline void _##func(void *ret) \ -{ \ - int cpu = smp_processor_id(); \ - *(int *)ret = __##func(cpu); \ -} \ - \ -int func(unsigned int cpu) \ -{ \ - int ret; \ - smp_call_function_single(cpu, _##func, &ret, true); \ - return ret; \ -} - struct cpu_cacheinfo *get_cpu_cacheinfo(unsigned int cpu); int init_cache_level(unsigned int cpu); int populate_cache_leaves(unsigned int cpu);

From: Zou Wei zou_wei@huawei.com

[ Upstream commit 4faee8b65ec32346f8096e64c5fa1d5a73121742 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.

Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Zou Wei zou_wei@huawei.com Reviewed-by: Baolin Wang baolin.wang7@gmail.com Link: https://lore.kernel.org/r/1620094977-70146-1-git-send-email-zou_wei@huawei.c... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/sprd-dma.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c index 8546ad034720..b966115bfad1 100644 --- a/drivers/dma/sprd-dma.c +++ b/drivers/dma/sprd-dma.c @@ -1230,6 +1230,7 @@ static const struct of_device_id sprd_dma_match[] = { { .compatible = "sprd,sc9860-dma", }, {}, }; +MODULE_DEVICE_TABLE(of, sprd_dma_match);

static int __maybe_unused sprd_dma_runtime_suspend(struct device *dev) {

From: Radhey Shyam Pandey radhey.shyam.pandey@xilinx.com

[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ]

The xilinx dma driver uses the consistent allocations, so for correct operation also set the DMA mask for coherent APIs. It fixes the below kernel crash with dmatest client when DMA IP is configured with 64-bit address width and linux is booted from high (>4GB) memory.

Call trace: [ 489.531257] dma_alloc_from_pool+0x8c/0x1c0 [ 489.535431] dma_direct_alloc+0x284/0x330 [ 489.539432] dma_alloc_attrs+0x80/0xf0 [ 489.543174] dma_pool_alloc+0x160/0x2c0 [ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180 [ 489.551524] dmatest_func+0x3cc/0x114c [ 489.555266] kthread+0x124/0x130 [ 489.558486] ret_from_fork+0x10/0x3c [ 489.562051] ---[ end trace 248625b2d596a90a ]---

Signed-off-by: Radhey Shyam Pandey radhey.shyam.pandey@xilinx.com Reviewed-by: Harini Katakam harini.katakam@xilinx.com Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pan... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/xilinx/xilinx_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index ce18bca45ff2..7729b8d22553 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -2703,7 +2703,7 @@ static int xilinx_dma_probe(struct platform_device *pdev) xdev->ext_addr = false;

/* Set the dma mask bits */ - dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width)); + dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));

/* Initialize the DMA engine */ xdev->common.dev = &pdev->dev;

From: Jeff Layton jlayton@kernel.org

[ Upstream commit 3eaf5aa1cfa8c97c72f5824e2e9263d6cc977b03 ]

Signed-off-by: Jeff Layton jlayton@kernel.org Reviewed-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/caps.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index a49bf1fbaea8..0fad044a5752 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -1775,6 +1775,8 @@ static u64 __mark_caps_flushing(struct inode *inode, * try to invalidate mapping pages without blocking. */ static int try_nonblocking_invalidate(struct inode *inode) + __releases(ci->i_ceph_lock) + __acquires(ci->i_ceph_lock) { struct ceph_inode_info *ci = ceph_inode(inode); u32 invalidating_gen = ci->i_rdcache_gen;

From: Nanyong Sun sunnanyong@huawei.com

[ Upstream commit 5f5dec07aca7067216ed4c1342e464e7307a9197 ]

Patch series "nilfs2: fix incorrect usage of kobject".

This patchset from Nanyong Sun fixes memory leak issues and a NULL pointer dereference issue caused by incorrect usage of kboject in nilfs2 sysfs implementation.

This patch (of 6):

Reported by syzkaller:

BUG: memory leak unreferenced object 0xffff888100ca8988 (size 8): comm "syz-executor.1", pid 1930, jiffies 4294745569 (age 18.052s) hex dump (first 8 bytes): 6c 6f 6f 70 31 00 ff ff loop1... backtrace: kstrdup+0x36/0x70 mm/util.c:60 kstrdup_const+0x35/0x60 mm/util.c:83 kvasprintf_const+0xf1/0x180 lib/kasprintf.c:48 kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xc9/0x150 lib/kobject.c:473 nilfs_sysfs_create_device_group+0x150/0x7d0 fs/nilfs2/sysfs.c:986 init_nilfs+0xa21/0xea0 fs/nilfs2/the_nilfs.c:637 nilfs_fill_super fs/nilfs2/super.c:1046 [inline] nilfs_mount+0x7b4/0xe80 fs/nilfs2/super.c:1316 legacy_get_tree+0x105/0x210 fs/fs_context.c:592 vfs_get_tree+0x8e/0x2d0 fs/super.c:1498 do_new_mount fs/namespace.c:2905 [inline] path_mount+0xf9b/0x1990 fs/namespace.c:3235 do_mount+0xea/0x100 fs/namespace.c:3248 __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount fs/namespace.c:3433 [inline] __x64_sys_mount+0x14b/0x1f0 fs/namespace.c:3433 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

If kobject_init_and_add return with error, then the cleanup of kobject is needed because memory may be allocated in kobject_init_and_add without freeing.

And the place of cleanup_dev_kobject should use kobject_put to free the memory associated with the kobject. As the section "Kobject removal" of "Documentation/core-api/kobject.rst" says, kobject_del() just makes the kobject "invisible", but it is not cleaned up. And no more cleanup will do after cleanup_dev_kobject, so kobject_put is needed here.

Link: https://lkml.kernel.org/r/1625651306-10829-1-git-send-email-konishi.ryusuke@... Link: https://lkml.kernel.org/r/1625651306-10829-2-git-send-email-konishi.ryusuke@... Reported-by: Hulk Robot hulkci@huawei.com Link: https://lkml.kernel.org/r/20210629022556.3985106-2-sunnanyong@huawei.com Signed-off-by: Nanyong Sun sunnanyong@huawei.com Signed-off-by: Ryusuke Konishi konishi.ryusuke@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nilfs2/sysfs.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c index c6c8a33c81d5..cbfc132206e8 100644 --- a/fs/nilfs2/sysfs.c +++ b/fs/nilfs2/sysfs.c @@ -1000,7 +1000,7 @@ int nilfs_sysfs_create_device_group(struct super_block *sb) err = kobject_init_and_add(&nilfs->ns_dev_kobj, &nilfs_dev_ktype, NULL, "%s", sb->s_id); if (err) - goto free_dev_subgroups; + goto cleanup_dev_kobject;

err = nilfs_sysfs_create_mounted_snapshots_group(nilfs); if (err) @@ -1037,9 +1037,7 @@ delete_mounted_snapshots_group: nilfs_sysfs_delete_mounted_snapshots_group(nilfs);

cleanup_dev_kobject: - kobject_del(&nilfs->ns_dev_kobj); - -free_dev_subgroups: + kobject_put(&nilfs->ns_dev_kobj); kfree(nilfs->ns_dev_subgroups);

failed_create_device_group:

From: Nanyong Sun sunnanyong@huawei.com

[ Upstream commit 24f8cb1ed057c840728167dab33b32e44147c86f ]

If kobject_init_and_add return with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-4-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-4-git-send-email-konishi.ryusuke@... Signed-off-by: Nanyong Sun sunnanyong@huawei.com Signed-off-by: Ryusuke Konishi konishi.ryusuke@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nilfs2/sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c index ca720d958315..31d640a87b59 100644 --- a/fs/nilfs2/sysfs.c +++ b/fs/nilfs2/sysfs.c @@ -92,8 +92,8 @@ static int nilfs_sysfs_create_##name##_group(struct the_nilfs *nilfs) \ err = kobject_init_and_add(kobj, &nilfs_##name##_ktype, parent, \ #name); \ if (err) \ - return err; \ - return 0; \ + kobject_put(kobj); \ + return err; \ } \ static void nilfs_sysfs_delete_##name##_group(struct the_nilfs *nilfs) \ { \

From: Nanyong Sun sunnanyong@huawei.com

[ Upstream commit b2fe39c248f3fa4bbb2a20759b4fdd83504190f7 ]

If kobject_init_and_add returns with error, kobject_put() is needed here to avoid memory leak, because kobject_init_and_add may return error without freeing the memory associated with the kobject it allocated.

Link: https://lkml.kernel.org/r/20210629022556.3985106-6-sunnanyong@huawei.com Link: https://lkml.kernel.org/r/1625651306-10829-6-git-send-email-konishi.ryusuke@... Signed-off-by: Nanyong Sun sunnanyong@huawei.com Signed-off-by: Ryusuke Konishi konishi.ryusuke@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nilfs2/sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c index 195f42192a15..6c92ac314b06 100644 --- a/fs/nilfs2/sysfs.c +++ b/fs/nilfs2/sysfs.c @@ -208,9 +208,9 @@ int nilfs_sysfs_create_snapshot_group(struct nilfs_root *root) }

if (err) - return err; + kobject_put(&root->snapshot_kobj);

- return 0; + return err; }

void nilfs_sysfs_delete_snapshot_group(struct nilfs_root *root)

From: Uwe Kleine-König u.kleine-koenig@pengutronix.de

[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ]

A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver.

Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-img.c | 16 ---------------- 1 file changed, 16 deletions(-)

diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c index 22c002e685b3..37f9b688661d 100644 --- a/drivers/pwm/pwm-img.c +++ b/drivers/pwm/pwm-img.c @@ -329,23 +329,7 @@ err_pm_disable: static int img_pwm_remove(struct platform_device *pdev) { struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev); - u32 val; - unsigned int i; - int ret; - - ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) { - pm_runtime_put(&pdev->dev); - return ret; - } - - for (i = 0; i < pwm_chip->chip.npwm; i++) { - val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); - val &= ~BIT(i); - img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val); - }

- pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); if (!pm_runtime_status_suspended(&pdev->dev)) img_pwm_runtime_suspend(&pdev->dev);

From: Uwe Kleine-König u.kleine-koenig@pengutronix.de

[ Upstream commit d44084c93427bb0a9261432db1a8ca76a42d805e ]

A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver.

Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-stm32-lp.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c index 67fca62524dc..05bb1f95a773 100644 --- a/drivers/pwm/pwm-stm32-lp.c +++ b/drivers/pwm/pwm-stm32-lp.c @@ -225,8 +225,6 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev) { struct stm32_pwm_lp *priv = platform_get_drvdata(pdev);

- pwm_disable(&priv->chip.pwms[0]); - return pwmchip_remove(&priv->chip); }

From: Yu-Tung Chang mtwget@gmail.com

[ Upstream commit 0c45d3e24ef3d3d87c5e0077b8f38d1372af7176 ]

The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so depending on the configuration the build may fail. Fix it.

Signed-off-by: Yu-Tung Chang mtwget@gmail.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rtc/Kconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 9ae7ce3f5069..0ad8d84aeb33 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -625,6 +625,7 @@ config RTC_DRV_FM3130

config RTC_DRV_RX8010 tristate "Epson RX8010SJ" + select REGMAP_I2C help If you say yes here you get support for the Epson RX8010SJ RTC chip.