Both the GW72xx and GW73xx boards have USB1 routed to a USB OTG connector and USB2 routed to a USB hub.

The OTG connector has over-current protection with an active-low pin and the USB1 to HUB connection has no over-current protection (as the HUB itself implements this for its downstream ports).

Add proper dt nodes to specify the over-current pin polarity for USB1 and disable over-current protection for USB2.

Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits") Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey tharvey@gateworks.com --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 2 ++ arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 2 ++ 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 27afa46a253a..b0de99b4a608 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -139,12 +139,14 @@

&usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <&reg_usb_otg1_vbus>; status = "okay"; };

&usbotg2 { dr_mode = "host"; + disable-over-current; vbus-supply = <&reg_usb_otg2_vbus>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index a59e849c7be2..3c26c125678d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -166,12 +166,14 @@

&usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <&reg_usb_otg1_vbus>; status = "okay"; };

&usbotg2 { dr_mode = "host"; + disable-over-current; vbus-supply = <&reg_usb_otg2_vbus>; status = "okay"; };