[PATCH AUTOSEL 5.4 001/266] power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select
From: Enric Balletbo i Serra enric.balletbo@collabora.com
[ Upstream commit 87c3d579c8ed0eaea6b1567d529a8daa85a2bc6c ]
regmap is a library function that gets selected by drivers that need it. No driver modules should depend on it. Depending on REGMAP_I2C makes this driver only build if another driver already selected REGMAP_I2C, as the symbol can't be selected through the menu kernel configuration.
Fixes: 2219a935963e ("power_supply: Add TI BQ24257 charger driver") Signed-off-by: Enric Balletbo i Serra enric.balletbo@collabora.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index c84a7b1caeb6..d6fdc10c29f0 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -577,7 +577,7 @@ config CHARGER_BQ24257 tristate "TI BQ24250/24251/24257 battery charger driver" depends on I2C depends on GPIOLIB || COMPILE_TEST - depends on REGMAP_I2C + select REGMAP_I2C help Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery chargers.
From: Rikard Falkeborn rikard.falkeborn@gmail.com
[ Upstream commit ee25d9742dabed3fd18158b518f846abeb70f319 ]
round_down() can only round to powers of 2. If round_down() is asked to round to something that is not a power of 2, incorrect results are produced. The incorrect results can be both too large and too small.
Instead, use rounddown() which can round to any number.
Fixes: 6a721db180a2 ("clk: sunxi: Add A31 clocks support") Signed-off-by: Rikard Falkeborn rikard.falkeborn@gmail.com Signed-off-by: Maxime Ripard maxime@cerno.tech Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/sunxi/clk-sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 27201fd26e44..e1aa1fbac48a 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -90,7 +90,7 @@ static void sun6i_a31_get_pll1_factors(struct factors_request *req) * Round down the frequency to the closest multiple of either * 6 or 16 */ - u32 round_freq_6 = round_down(freq_mhz, 6); + u32 round_freq_6 = rounddown(freq_mhz, 6); u32 round_freq_16 = round_down(freq_mhz, 16);
if (round_freq_6 > round_freq_16)
From: Dmitry Osipenko digetx@gmail.com
[ Upstream commit 3ef9d5073b552d56bd6daf2af1e89b7e8d4df183 ]
The microphone-jack state needs to be masked in a case of a 4-pin jack when microphone and ground pins are shorted. Presence of nvidia,headset tells that WM8903 CODEC driver should mask microphone's status if short circuit is detected, i.e headphones are inserted.
Signed-off-by: Dmitry Osipenko digetx@gmail.com Link: https://lore.kernel.org/r/20200330204011.18465-3-digetx@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/tegra/tegra_wm8903.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/soc/tegra/tegra_wm8903.c b/sound/soc/tegra/tegra_wm8903.c index 6211dfda2195..0fa01cacfec9 100644 --- a/sound/soc/tegra/tegra_wm8903.c +++ b/sound/soc/tegra/tegra_wm8903.c @@ -159,6 +159,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd) struct snd_soc_component *component = codec_dai->component; struct snd_soc_card *card = rtd->card; struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card); + int shrt = 0;
if (gpio_is_valid(machine->gpio_hp_det)) { tegra_wm8903_hp_jack_gpio.gpio = machine->gpio_hp_det; @@ -171,12 +172,15 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd) &tegra_wm8903_hp_jack_gpio); }
+ if (of_property_read_bool(card->dev->of_node, "nvidia,headset")) + shrt = SND_JACK_MICROPHONE; + snd_soc_card_jack_new(rtd->card, "Mic Jack", SND_JACK_MICROPHONE, &tegra_wm8903_mic_jack, tegra_wm8903_mic_jack_pins, ARRAY_SIZE(tegra_wm8903_mic_jack_pins)); wm8903_mic_detect(component, &tegra_wm8903_mic_jack, SND_JACK_MICROPHONE, - 0); + shrt);
snd_soc_dapm_force_enable_pin(&card->dapm, "MICBIAS");
From: Adam Honse calcprogrammer1@gmail.com
[ Upstream commit f27237c174fd9653033330e4e532cd9d153ce824 ]
The AMD X370 and other AM4 chipsets (A/B/X 3/4/5 parts) and Threadripper equivalents have a secondary SMBus controller at I/O port address 0x0B20. This bus is used by several manufacturers to control motherboard RGB lighting via embedded controllers. I have been using this bus in my OpenRGB project to control the Aura RGB on many motherboards and ASRock also uses this bus for their Polychrome RGB controller.
I am not aware of any CZ-compatible platforms which do not have the second SMBus channel. All of AMD's AM4- and Threadripper- series chipsets that OpenRGB users have tested appear to have this secondary bus. I also noticed this secondary bus is present on older AMD platforms including my FM1 home server.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202587 Signed-off-by: Adam Honse calcprogrammer1@gmail.com Reviewed-by: Jean Delvare jdelvare@suse.de Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com Tested-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-piix4.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 30ded6422e7b..69740a4ff1db 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -977,7 +977,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) }
if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) { + (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS || + dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) { retval = piix4_setup_sb800(dev, id, 1); }
From: YueHaibing yuehaibing@huawei.com
[ Upstream commit fe17e6cdc0fefca96ba9659be4b2b07487cbf0c5 ]
when do randconfig like this: CONFIG_SND_SOC_SOF_IMX8_SUPPORT=y CONFIG_SND_SOC_SOF_IMX8=y CONFIG_SND_SOC_SOF_OF=y CONFIG_IMX_DSP=m CONFIG_IMX_SCU=y
there is a link error:
sound/soc/sof/imx/imx8.o: In function 'imx8_send_msg': imx8.c:(.text+0x380): undefined reference to 'imx_dsp_ring_doorbell'
Select IMX_DSP in SND_SOC_SOF_IMX8_SUPPORT to fix this
Fixes: f9ad75468453 ("ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: YueHaibing yuehaibing@huawei.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com Link: https://lore.kernel.org/r/20200409071832.2039-2-daniel.baluta@oss.nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/imx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/sof/imx/Kconfig b/sound/soc/sof/imx/Kconfig index 71f318bc2c74..b4f0426685c4 100644 --- a/sound/soc/sof/imx/Kconfig +++ b/sound/soc/sof/imx/Kconfig @@ -14,7 +14,7 @@ if SND_SOC_SOF_IMX_TOPLEVEL config SND_SOC_SOF_IMX8_SUPPORT bool "SOF support for i.MX8" depends on IMX_SCU - depends on IMX_DSP + select IMX_DSP help This adds support for Sound Open Firmware for NXP i.MX8 platforms Say Y if you have such a device.
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit 97b31a6f5fb95b1ec6575b78a7240baddba34384 ]
With DEBUG_SHIRQ enabled we have a kernel crash
[ 116.482696] BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 116.606571] Call Trace: [ 116.609023] <IRQ> [ 116.611047] complete+0x34/0x50 [ 116.614206] bmp085_eoc_irq+0x9/0x10 [bmp280]
because DEBUG_SHIRQ mechanism fires an IRQ before registration and drivers ought to be able to handle an interrupt happening before request_irq() returns.
Fixes: aae953949651 ("iio: pressure: bmp280: add support for BMP085 EOC interrupt") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Acked-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/pressure/bmp280-core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 8d0f15f27dc5..084a1d56cc2f 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -706,7 +706,7 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) unsigned int ctrl;
if (data->use_eoc) - init_completion(&data->done); + reinit_completion(&data->done);
ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas); if (ret) @@ -962,6 +962,9 @@ static int bmp085_fetch_eoc_irq(struct device *dev, "trying to enforce it\n"); irq_trig = IRQF_TRIGGER_RISING; } + + init_completion(&data->done); + ret = devm_request_threaded_irq(dev, irq, bmp085_eoc_irq,
From: Alexandru Ardelean alexandru.ardelean@analog.com
[ Upstream commit 9b7a12c3e090cf3fba6f66f1f23abbc6e0e86021 ]
The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions.
For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code.
This change reworks the predisable/postenable hooks so that the pollfunc is attached/detached in the correct position. It also balances the calls a bit, by grouping the preenable and the iio_triggered_buffer_postenable() into a single isl29125_buffer_postenable() function.
Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/light/isl29125.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c index e37894f0ae0b..95611f5eff01 100644 --- a/drivers/iio/light/isl29125.c +++ b/drivers/iio/light/isl29125.c @@ -213,13 +213,24 @@ static const struct iio_info isl29125_info = { .attrs = &isl29125_attribute_group, };
-static int isl29125_buffer_preenable(struct iio_dev *indio_dev) +static int isl29125_buffer_postenable(struct iio_dev *indio_dev) { struct isl29125_data *data = iio_priv(indio_dev); + int err; + + err = iio_triggered_buffer_postenable(indio_dev); + if (err) + return err;
data->conf1 |= ISL29125_MODE_RGB; - return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, + err = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, data->conf1); + if (err) { + iio_triggered_buffer_predisable(indio_dev); + return err; + } + + return 0; }
static int isl29125_buffer_predisable(struct iio_dev *indio_dev) @@ -227,19 +238,18 @@ static int isl29125_buffer_predisable(struct iio_dev *indio_dev) struct isl29125_data *data = iio_priv(indio_dev); int ret;
- ret = iio_triggered_buffer_predisable(indio_dev); - if (ret < 0) - return ret; - data->conf1 &= ~ISL29125_MODE_MASK; data->conf1 |= ISL29125_MODE_PD; - return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, + ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, data->conf1); + + iio_triggered_buffer_predisable(indio_dev); + + return ret; }
static const struct iio_buffer_setup_ops isl29125_buffer_setup_ops = { - .preenable = isl29125_buffer_preenable, - .postenable = &iio_triggered_buffer_postenable, + .postenable = isl29125_buffer_postenable, .predisable = isl29125_buffer_predisable, };
From: Alex Elder elder@linaro.org
[ Upstream commit 6442df49400b466431979e7634849a464a5f1861 ]
If ida_simple_get() returns an error when called in rproc_alloc(), put_device() is called to clean things up. By this time the rproc device type has been assigned, with rproc_type_release() as the release function.
The first thing rproc_type_release() does is call: idr_destroy(&rproc->notifyids);
But at the time the ida_simple_get() call is made, the notifyids field in the remoteproc structure has not been initialized.
I'm not actually sure this case causes an observable problem, but it's incorrect. Fix this by initializing the notifyids field before calling ida_simple_get() in rproc_alloc().
Fixes: b5ab5e24e960 ("remoteproc: maintain a generic child device for each rproc") Signed-off-by: Alex Elder elder@linaro.org Reviewed-by: Mathieu Poirier mathieu.poirier@linaro.org Reviewed-by: Suman Anna s-anna@ti.com Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20200415204858.2448-2-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/remoteproc/remoteproc_core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 0896b3614eb1..ce92ae227aa1 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -2036,6 +2036,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, rproc->dev.type = &rproc_type; rproc->dev.class = &rproc_class; rproc->dev.driver_data = rproc; + idr_init(&rproc->notifyids);
/* Assign a unique device index and name */ rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL); @@ -2060,8 +2061,6 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
mutex_init(&rproc->lock);
- idr_init(&rproc->notifyids); - INIT_LIST_HEAD(&rproc->carveouts); INIT_LIST_HEAD(&rproc->mappings); INIT_LIST_HEAD(&rproc->traces);
From: Bryan O'Donoghue bryan.odonoghue@linaro.org
[ Upstream commit f47ab3c2f5338828a67e89d5f688d2cef9605245 ]
During the process of debugging a processor derived from the msm8916 which we found the new processor was not starting one of its PLLs.
After tracing the addresses and writes that downstream was doing and comparing to upstream it became obvious that we were writing to a different register location than downstream when trying to configure the PLL.
This error is also present in upstream msm8916.
As an example clk-pll.c::clk_pll_recalc_rate wants to write to pll->config_reg updating the bit-field POST_DIV_RATIO. That bit-field is defined in PLL_USER_CTL not in PLL_CONFIG_CTL. Taking the BIMC PLL as an example
lm80-p0436-13_c_qc_snapdragon_410_processor_hrd.pdf
0x01823010 GCC_BIMC_PLL_USER_CTL 0x01823014 GCC_BIMC_PLL_CONFIG_CTL
This pattern is repeated for gpll0, gpll1, gpll2 and bimc_pll.
This error is likely not apparent since the bootloader will already have initialized these PLLs.
This patch corrects the location of config_reg from PLL_CONFIG_CTL to PLL_USER_CTL for all relevant PLLs on msm8916.
Fixes commit 3966fab8b6ab ("clk: qcom: Add MSM8916 Global Clock Controller support")
Cc: Georgi Djakov georgi.djakov@linaro.org Cc: Andy Gross agross@kernel.org Cc: Bjorn Andersson bjorn.andersson@linaro.org Cc: Michael Turquette mturquette@baylibre.com Cc: Stephen Boyd sboyd@kernel.org Signed-off-by: Bryan O'Donoghue bryan.odonoghue@linaro.org Link: https://lkml.kernel.org/r/20200329124116.4185447-1-bryan.odonoghue@linaro.or... Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/qcom/gcc-msm8916.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c index 4e329a7baf2b..17e4a5a2a9fd 100644 --- a/drivers/clk/qcom/gcc-msm8916.c +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -260,7 +260,7 @@ static struct clk_pll gpll0 = { .l_reg = 0x21004, .m_reg = 0x21008, .n_reg = 0x2100c, - .config_reg = 0x21014, + .config_reg = 0x21010, .mode_reg = 0x21000, .status_reg = 0x2101c, .status_bit = 17, @@ -287,7 +287,7 @@ static struct clk_pll gpll1 = { .l_reg = 0x20004, .m_reg = 0x20008, .n_reg = 0x2000c, - .config_reg = 0x20014, + .config_reg = 0x20010, .mode_reg = 0x20000, .status_reg = 0x2001c, .status_bit = 17, @@ -314,7 +314,7 @@ static struct clk_pll gpll2 = { .l_reg = 0x4a004, .m_reg = 0x4a008, .n_reg = 0x4a00c, - .config_reg = 0x4a014, + .config_reg = 0x4a010, .mode_reg = 0x4a000, .status_reg = 0x4a01c, .status_bit = 17, @@ -341,7 +341,7 @@ static struct clk_pll bimc_pll = { .l_reg = 0x23004, .m_reg = 0x23008, .n_reg = 0x2300c, - .config_reg = 0x23014, + .config_reg = 0x23010, .mode_reg = 0x23000, .status_reg = 0x2301c, .status_bit = 17,
From: Shengjiu Wang shengjiu.wang@nxp.com
[ Upstream commit 1fecbb71fe0e46b886f84e3b6decca6643c3af6d ]
Disable exception interrupt before scheduling tasklet, otherwise if the tasklet isn't handled immediately, there will be endless xrun interrupt.
Fixes: 7ccafa2b3879 ("ASoC: fsl_esai: recover the channel swap after xrun") Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Acked-by: Nicolin Chen nicoleotsuka@gmail.com Link: https://lore.kernel.org/r/a8f2ad955aac9e52587beedc1133b3efbe746895.158796882... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/fsl_esai.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index c7a49d03463a..84290be778f0 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -87,6 +87,10 @@ static irqreturn_t esai_isr(int irq, void *devid) if ((saisr & (ESAI_SAISR_TUE | ESAI_SAISR_ROE)) && esai_priv->reset_at_xrun) { dev_dbg(&pdev->dev, "reset module for xrun\n"); + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, + ESAI_xCR_xEIE_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, + ESAI_xCR_xEIE_MASK, 0); tasklet_schedule(&esai_priv->task); }
From: Jon Hunter jonathanh@nvidia.com
[ Upstream commit d8207c155a7c6015eb7f43739baa7dfb1fa638af ]
If probing the LP885x backlight fails after the regulators have been enabled, then the following warning is seen when releasing the regulators ...
WARNING: CPU: 1 PID: 289 at drivers/regulator/core.c:2051 _regulator_put.part.28+0x158/0x160 Modules linked in: tegra_xudc lp855x_bl(+) host1x pwm_tegra ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 1 PID: 289 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200224 #1 Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
...
Call trace: _regulator_put.part.28+0x158/0x160 regulator_put+0x34/0x50 devm_regulator_release+0x10/0x18 release_nodes+0x12c/0x230 devres_release_all+0x34/0x50 really_probe+0x1c0/0x370 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x78 __driver_attach+0xb0/0xf0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x160/0x1f0 driver_register+0x60/0x110 i2c_register_driver+0x40/0x80 lp855x_driver_init+0x20/0x1000 [lp855x_bl] do_one_initcall+0x58/0x1a0 do_init_module+0x54/0x1d0 load_module+0x1d80/0x21c8 __do_sys_finit_module+0xe8/0x100 __arm64_sys_finit_module+0x18/0x20 el0_svc_common.constprop.3+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xf4/0x1b0 el0_sync+0x140/0x180
Fix this by ensuring that the regulators are disabled, if enabled, on probe failure.
Finally, ensure that the vddio regulator is disabled in the driver remove handler.
Signed-off-by: Jon Hunter jonathanh@nvidia.com Reviewed-by: Daniel Thompson daniel.thompson@linaro.org Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/backlight/lp855x_bl.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c index f68920131a4a..e94932c69f54 100644 --- a/drivers/video/backlight/lp855x_bl.c +++ b/drivers/video/backlight/lp855x_bl.c @@ -456,7 +456,7 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret = regulator_enable(lp->enable); if (ret < 0) { dev_err(lp->dev, "failed to enable vddio: %d\n", ret); - return ret; + goto disable_supply; }
/* @@ -471,24 +471,34 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret = lp855x_configure(lp); if (ret) { dev_err(lp->dev, "device config err: %d", ret); - return ret; + goto disable_vddio; }
ret = lp855x_backlight_register(lp); if (ret) { dev_err(lp->dev, "failed to register backlight. err: %d\n", ret); - return ret; + goto disable_vddio; }
ret = sysfs_create_group(&lp->dev->kobj, &lp855x_attr_group); if (ret) { dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret); - return ret; + goto disable_vddio; }
backlight_update_status(lp->bl); + return 0; + +disable_vddio: + if (lp->enable) + regulator_disable(lp->enable); +disable_supply: + if (lp->supply) + regulator_disable(lp->supply); + + return ret; }
static int lp855x_remove(struct i2c_client *cl) @@ -497,6 +507,8 @@ static int lp855x_remove(struct i2c_client *cl)
lp->bl->props.brightness = 0; backlight_update_status(lp->bl); + if (lp->enable) + regulator_disable(lp->enable); if (lp->supply) regulator_disable(lp->supply); sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
From: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com
[ Upstream commit ae990a1de014396ffc8d0fcc31b6888c9b0ce59a ]
Fix IOMMU device node names as "iommu@".
Fixes: bbb44da0b595 ("ARM: dts: r8a7743: Add IPMMU DT nodes") Fixes: 0dcba3de5835 ("ARM: dts: r8a7745: Add IPMMU DT nodes") Fixes: 350ae49b97c4 ("ARM: dts: r8a7744: Add IPMMU DT nodes") Fixes: 70496727c082 ("ARM: shmobile: r8a7790: Add IPMMU DT nodes") Fixes: f1951852ed17 ("ARM: shmobile: r8a7791: Add IPMMU DT nodes") Fixes: 098cb3a601e6 ("ARM: shmobile: r8a7793: Add IPMMU nodes") Fixes: 1cb2794f6082 ("ARM: shmobile: r8a7794: Add IPMMU DT nodes") Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Reviewed-by: Niklas Söderlund niklas.soderlund+renesas@ragnatech.se Link: https://lore.kernel.org/r/1587461756-13317-1-git-send-email-yoshihiro.shimod... Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/r8a7743.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7744.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7745.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7790.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7791.dtsi | 14 +++++++------- arch/arm/boot/dts/r8a7793.dtsi | 14 +++++++------- arch/arm/boot/dts/r8a7794.dtsi | 12 ++++++------ 7 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index de981d629bdd..fdd267819319 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -338,7 +338,7 @@ thermal: thermal@e61f0000 { #thermal-sensor-cells = <0>; };
- ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -348,7 +348,7 @@ ipmmu_sy0: mmu@e6280000 { status = "disabled"; };
- ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -357,7 +357,7 @@ ipmmu_sy1: mmu@e6290000 { status = "disabled"; };
- ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -367,7 +367,7 @@ ipmmu_ds: mmu@e6740000 { status = "disabled"; };
- ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -376,7 +376,7 @@ ipmmu_mp: mmu@ec680000 { status = "disabled"; };
- ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -386,7 +386,7 @@ ipmmu_mx: mmu@fe951000 { status = "disabled"; };
- ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7743", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index fa74a262107b..8264481bf876 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -338,7 +338,7 @@ thermal: thermal@e61f0000 { #thermal-sensor-cells = <0>; };
- ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -348,7 +348,7 @@ ipmmu_sy0: mmu@e6280000 { status = "disabled"; };
- ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -357,7 +357,7 @@ ipmmu_sy1: mmu@e6290000 { status = "disabled"; };
- ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -367,7 +367,7 @@ ipmmu_ds: mmu@e6740000 { status = "disabled"; };
- ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -376,7 +376,7 @@ ipmmu_mp: mmu@ec680000 { status = "disabled"; };
- ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -386,7 +386,7 @@ ipmmu_mx: mmu@fe951000 { status = "disabled"; };
- ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7744", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index c53f7ff20695..c306713f2ab7 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -302,7 +302,7 @@ irqc: interrupt-controller@e61c0000 { resets = <&cpg 407>; };
- ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -312,7 +312,7 @@ ipmmu_sy0: mmu@e6280000 { status = "disabled"; };
- ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -321,7 +321,7 @@ ipmmu_sy1: mmu@e6290000 { status = "disabled"; };
- ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -331,7 +331,7 @@ ipmmu_ds: mmu@e6740000 { status = "disabled"; };
- ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -340,7 +340,7 @@ ipmmu_mp: mmu@ec680000 { status = "disabled"; };
- ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -350,7 +350,7 @@ ipmmu_mx: mmu@fe951000 { status = "disabled"; };
- ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7745", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 5a2747758f67..e3ba00a22eeb 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -427,7 +427,7 @@ thermal: thermal@e61f0000 { #thermal-sensor-cells = <0>; };
- ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -437,7 +437,7 @@ ipmmu_sy0: mmu@e6280000 { status = "disabled"; };
- ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -446,7 +446,7 @@ ipmmu_sy1: mmu@e6290000 { status = "disabled"; };
- ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -456,7 +456,7 @@ ipmmu_ds: mmu@e6740000 { status = "disabled"; };
- ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -465,7 +465,7 @@ ipmmu_mp: mmu@ec680000 { status = "disabled"; };
- ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -475,7 +475,7 @@ ipmmu_mx: mmu@fe951000 { status = "disabled"; };
- ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6f875502453c..a26f86ccc579 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -350,7 +350,7 @@ thermal: thermal@e61f0000 { #thermal-sensor-cells = <0>; };
- ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -360,7 +360,7 @@ ipmmu_sy0: mmu@e6280000 { status = "disabled"; };
- ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -369,7 +369,7 @@ ipmmu_sy1: mmu@e6290000 { status = "disabled"; };
- ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -379,7 +379,7 @@ ipmmu_ds: mmu@e6740000 { status = "disabled"; };
- ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -388,7 +388,7 @@ ipmmu_mp: mmu@ec680000 { status = "disabled"; };
- ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -398,7 +398,7 @@ ipmmu_mx: mmu@fe951000 { status = "disabled"; };
- ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; @@ -407,7 +407,7 @@ ipmmu_rt: mmu@ffc80000 { status = "disabled"; };
- ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index bf05110fac4e..fa3839795018 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -336,7 +336,7 @@ thermal: thermal@e61f0000 { #thermal-sensor-cells = <0>; };
- ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -346,7 +346,7 @@ ipmmu_sy0: mmu@e6280000 { status = "disabled"; };
- ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -355,7 +355,7 @@ ipmmu_sy1: mmu@e6290000 { status = "disabled"; };
- ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -365,7 +365,7 @@ ipmmu_ds: mmu@e6740000 { status = "disabled"; };
- ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -374,7 +374,7 @@ ipmmu_mp: mmu@ec680000 { status = "disabled"; };
- ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -384,7 +384,7 @@ ipmmu_mx: mmu@fe951000 { status = "disabled"; };
- ipmmu_rt: mmu@ffc80000 { + ipmmu_rt: iommu@ffc80000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xffc80000 0 0x1000>; @@ -393,7 +393,7 @@ ipmmu_rt: mmu@ffc80000 { status = "disabled"; };
- ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 8d797d34816e..9dd952479e68 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -290,7 +290,7 @@ irqc0: interrupt-controller@e61c0000 { resets = <&cpg 407>; };
- ipmmu_sy0: mmu@e6280000 { + ipmmu_sy0: iommu@e6280000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6280000 0 0x1000>; @@ -300,7 +300,7 @@ ipmmu_sy0: mmu@e6280000 { status = "disabled"; };
- ipmmu_sy1: mmu@e6290000 { + ipmmu_sy1: iommu@e6290000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6290000 0 0x1000>; @@ -309,7 +309,7 @@ ipmmu_sy1: mmu@e6290000 { status = "disabled"; };
- ipmmu_ds: mmu@e6740000 { + ipmmu_ds: iommu@e6740000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe6740000 0 0x1000>; @@ -319,7 +319,7 @@ ipmmu_ds: mmu@e6740000 { status = "disabled"; };
- ipmmu_mp: mmu@ec680000 { + ipmmu_mp: iommu@ec680000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xec680000 0 0x1000>; @@ -328,7 +328,7 @@ ipmmu_mp: mmu@ec680000 { status = "disabled"; };
- ipmmu_mx: mmu@fe951000 { + ipmmu_mx: iommu@fe951000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xfe951000 0 0x1000>; @@ -338,7 +338,7 @@ ipmmu_mx: mmu@fe951000 { status = "disabled"; };
- ipmmu_gp: mmu@e62a0000 { + ipmmu_gp: iommu@e62a0000 { compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; reg = <0 0xe62a0000 0 0x1000>;
From: Xiyu Yang xiyuyang19@fudan.edu.cn
[ Upstream commit a697ae6ea56e23397341b027098c1b11d9ab13da ]
davinci_mcasp_get_dma_type() invokes dma_request_chan(), which returns a reference of the specified dma_chan object to "chan" with increased refcnt.
When davinci_mcasp_get_dma_type() returns, local variable "chan" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of davinci_mcasp_get_dma_type(). When chan device is NULL, the function forgets to decrease the refcnt increased by dma_request_chan(), causing a refcnt leak.
Fix this issue by calling dma_release_channel() when chan device is NULL.
Signed-off-by: Xiyu Yang xiyuyang19@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Acked-by: Peter Ujfalusi peter.ujfalusi@ti.com Link: https://lore.kernel.org/r/1587818916-38730-1-git-send-email-xiyuyang19@fudan... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/ti/davinci-mcasp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index 7aa3c32e4a49..0541071f454b 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -1875,8 +1875,10 @@ static int davinci_mcasp_get_dma_type(struct davinci_mcasp *mcasp) PTR_ERR(chan)); return PTR_ERR(chan); } - if (WARN_ON(!chan->device || !chan->device->dev)) + if (WARN_ON(!chan->device || !chan->device->dev)) { + dma_release_channel(chan); return -EINVAL; + }
if (chan->device->dev->of_node) ret = of_property_read_string(chan->device->dev->of_node,
From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit d2854bbe5f5c4b4bec8061caf4f2e603d8819446 ]
The CMA and DMA_CMA Kconfig options need to be selected by the Integrator in order to produce boot console on some Integrator systems.
The REGULATOR and REGULATOR_FIXED_VOLTAGE need to be selected in order to boot the system from an external MMC card when using MMCI/PL181 from the device tree probe path.
Select these things directly from the Kconfig so we are sure to be able to bring the systems up with console from any device tree.
Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-integrator/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 982eabc36163..2406cab73835 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -4,6 +4,8 @@ menuconfig ARCH_INTEGRATOR depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA select COMMON_CLK_VERSATILE + select CMA + select DMA_CMA select HAVE_TCM select ICST select MFD_SYSCON @@ -35,14 +37,13 @@ config INTEGRATOR_IMPD1 select ARM_VIC select GPIO_PL061 select GPIOLIB + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help The IM-PD1 is an add-on logic module for the Integrator which allows ARM(R) Ltd PrimeCells to be developed and evaluated. The IM-PD1 can be found on the Integrator/PP2 platform.
- To compile this driver as a module, choose M here: the - module will be called impd1. - config INTEGRATOR_CM7TDMI bool "Integrator/CM7TDMI core module" depends on ARCH_INTEGRATOR_AP
From: Marek Vasut marex@denx.de
[ Upstream commit 010ca9fe500bfe365860b50220ff80541c18f0e1 ]
Add PHY reset GPIO on AV96 ethernet PHY.
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Signed-off-by: Marek Vasut marex@denx.de Cc: Alexandre Torgue alexandre.torgue@st.com Cc: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Cc: Maxime Coquelin mcoquelin.stm32@gmail.com Cc: Patrice Chotard patrice.chotard@st.com Cc: Patrick Delaunay patrick.delaunay@st.com Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue alexandre.torgue@st.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/stm32mp157a-avenger96.dts | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 2e4742c53d04..7b8c3f25861c 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -91,6 +91,9 @@ mdio0 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; + reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + phy0: ethernet-phy@7 { reg = <7>; };
From: Johannes Thumshirn johannes.thumshirn@wdc.com
[ Upstream commit 20a66f2bf280277ab5bb22e27445153b4eb0ac88 ]
In case scsi_setup_fs_cmnd() fails we're not freeing the sgtables allocated by scsi_init_io(), thus we leak the allocated memory.
Free the sgtables allocated by scsi_init_io() in case scsi_setup_fs_cmnd() fails.
Technically scsi_setup_scsi_cmnd() does not suffer from this problem as it can only fail if scsi_init_io() fails, so it does not have sgtables allocated. But to maintain symmetry and as a measure of defensive programming, free the sgtables on scsi_setup_scsi_cmnd() failure as well. scsi_mq_free_sgtables() has safeguards against double-freeing of memory so this is safe to do.
While we're at it, rename scsi_mq_free_sgtables() to scsi_free_sgtables().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205595 Link: https://lore.kernel.org/r/20200428104605.8143-2-johannes.thumshirn@wdc.com Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Daniel Wagner dwagner@suse.de Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_lib.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 91c007d26c1e..206c9f53e9e7 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -551,7 +551,7 @@ static void scsi_uninit_cmd(struct scsi_cmnd *cmd) } }
-static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd) +static void scsi_free_sgtables(struct scsi_cmnd *cmd) { if (cmd->sdb.table.nents) sg_free_table_chained(&cmd->sdb.table, @@ -563,7 +563,7 @@ static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd)
static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd) { - scsi_mq_free_sgtables(cmd); + scsi_free_sgtables(cmd); scsi_uninit_cmd(cmd); scsi_del_cmd_from_list(cmd); } @@ -1063,7 +1063,7 @@ blk_status_t scsi_init_io(struct scsi_cmnd *cmd)
return BLK_STS_OK; out_free_sgtables: - scsi_mq_free_sgtables(cmd); + scsi_free_sgtables(cmd); return ret; } EXPORT_SYMBOL(scsi_init_io); @@ -1214,6 +1214,7 @@ static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev, struct request *req) { struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); + blk_status_t ret;
if (!blk_rq_bytes(req)) cmd->sc_data_direction = DMA_NONE; @@ -1223,9 +1224,14 @@ static blk_status_t scsi_setup_cmnd(struct scsi_device *sdev, cmd->sc_data_direction = DMA_FROM_DEVICE;
if (blk_rq_is_scsi(req)) - return scsi_setup_scsi_cmnd(sdev, req); + ret = scsi_setup_scsi_cmnd(sdev, req); else - return scsi_setup_fs_cmnd(sdev, req); + ret = scsi_setup_fs_cmnd(sdev, req); + + if (ret != BLK_STS_OK) + scsi_free_sgtables(cmd); + + return ret; }
static blk_status_t
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 4a4c0cfb4be74e216dd4446b254594707455bfc6 ]
Smatch complains that the "path_data->handle" variable is user controlled. It comes from iscsi_set_path() so that seems possible. It's harmless to add a limit check.
The qedi->ep_tbl[] array has qedi->max_active_conns elements (which is always ISCSI_MAX_SESS_PER_HBA (4096) elements). The array is allocated in the qedi_cm_alloc_mem() function.
Link: https://lore.kernel.org/r/20200428131939.GA696531@mwanda Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by: Manish Rangankar mrangankar@marvell.com Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedi/qedi_iscsi.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c index 8829880a54c3..84a639698343 100644 --- a/drivers/scsi/qedi/qedi_iscsi.c +++ b/drivers/scsi/qedi/qedi_iscsi.c @@ -1214,6 +1214,10 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data) }
iscsi_cid = (u32)path_data->handle; + if (iscsi_cid >= qedi->max_active_conns) { + ret = -EINVAL; + goto set_path_exit; + } qedi_ep = qedi->ep_tbl[iscsi_cid]; QEDI_INFO(&qedi->dbg_ctx, QEDI_LOG_INFO, "iscsi_cid=0x%x, qedi_ep=%p\n", iscsi_cid, qedi_ep);
From: Neil Armstrong narmstrong@baylibre.com
[ Upstream commit 9ecded10b4b6af238da0c86197b0418912e7513e ]
The GX and AXG SCP sram nodes were using invalid compatible and node names for the sram entries.
Fixup the sram entries node names, and use proper compatible for them.
It notably fixes: sram@c8000000: 'scp-shmem@0', 'scp-shmem@200' do not match any of the regexes: '^([a-z]*-)?sram(-section)?@[a-f0-9]+$', 'pinctrl-[0-9]+'
Signed-off-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Kevin Hilman khilman@baylibre.com Link: https://lore.kernel.org/r/20200326165958.19274-3-narmstrong@baylibre.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 +++--- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 10 +++++----- 2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index bb4a2acb9970..502c4ac45c29 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1728,18 +1728,18 @@ sd_emmc_c: mmc@7000 { };
sram: sram@fffc0000 { - compatible = "amlogic,meson-axg-sram", "mmio-sram"; + compatible = "mmio-sram"; reg = <0x0 0xfffc0000 0x0 0x20000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0xfffc0000 0x20000>;
- cpu_scp_lpri: scp-shmem@13000 { + cpu_scp_lpri: scp-sram@13000 { compatible = "amlogic,meson-axg-scp-shmem"; reg = <0x13000 0x400>; };
- cpu_scp_hpri: scp-shmem@13400 { + cpu_scp_hpri: scp-sram@13400 { compatible = "amlogic,meson-axg-scp-shmem"; reg = <0x13400 0x400>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 6733050d735f..ce230d6ac35c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -345,20 +345,20 @@ gic: interrupt-controller@c4301000 { };
sram: sram@c8000000 { - compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram"; + compatible = "mmio-sram"; reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0xc8000000 0x14000>;
- cpu_scp_lpri: scp-shmem@0 { - compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; + cpu_scp_lpri: scp-sram@0 { + compatible = "amlogic,meson-gxbb-scp-shmem"; reg = <0x13000 0x400>; };
- cpu_scp_hpri: scp-shmem@200 { - compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; + cpu_scp_hpri: scp-sram@200 { + compatible = "amlogic,meson-gxbb-scp-shmem"; reg = <0x13400 0x400>; }; };
From: Kai-Heng Feng kai.heng.feng@canonical.com
[ Upstream commit dbd13179780555ecd3c992dea1222ca31920e892 ]
Currently mute LED and micmute LED share the same GPIO polarity.
So split the polarity for mute and micmute, in case they have different polarities.
Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Link: https://lore.kernel.org/r/20200430083255.5093-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index df5afac0b600..459a7d61326e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -81,6 +81,7 @@ struct alc_spec {
/* mute LED for HP laptops, see alc269_fixup_mic_mute_hook() */ int mute_led_polarity; + int micmute_led_polarity; hda_nid_t mute_led_nid; hda_nid_t cap_mute_led_nid;
@@ -4080,11 +4081,9 @@ static void alc269_fixup_hp_mute_led_mic3(struct hda_codec *codec,
/* update LED status via GPIO */ static void alc_update_gpio_led(struct hda_codec *codec, unsigned int mask, - bool enabled) + int polarity, bool enabled) { - struct alc_spec *spec = codec->spec; - - if (spec->mute_led_polarity) + if (polarity) enabled = !enabled; alc_update_gpio_data(codec, mask, !enabled); /* muted -> LED on */ } @@ -4095,7 +4094,8 @@ static void alc_fixup_gpio_mute_hook(void *private_data, int enabled) struct hda_codec *codec = private_data; struct alc_spec *spec = codec->spec;
- alc_update_gpio_led(codec, spec->gpio_mute_led_mask, enabled); + alc_update_gpio_led(codec, spec->gpio_mute_led_mask, + spec->mute_led_polarity, enabled); }
/* turn on/off mic-mute LED via GPIO per capture hook */ @@ -4104,6 +4104,7 @@ static void alc_gpio_micmute_update(struct hda_codec *codec) struct alc_spec *spec = codec->spec;
alc_update_gpio_led(codec, spec->gpio_mic_led_mask, + spec->micmute_led_polarity, spec->gen.micmute_led.led_value); }
@@ -5808,7 +5809,8 @@ static void alc280_hp_gpio4_automute_hook(struct hda_codec *codec,
snd_hda_gen_hp_automute(codec, jack); /* mute_led_polarity is set to 0, so we pass inverted value here */ - alc_update_gpio_led(codec, 0x10, !spec->gen.hp_jack_present); + alc_update_gpio_led(codec, 0x10, spec->mute_led_polarity, + !spec->gen.hp_jack_present); }
/* Manage GPIOs for HP EliteBook Folio 9480m.
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 7f0d5053c5a9d23fe5c2d337495a9d79038d267b ]
The "header->number" comes from the ioctl and it needs to be clamped to prevent out of bounds writes.
Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/20200501094011.GA960082@mwanda Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/isa/wavefront/wavefront_synth.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c index c5b1d5900eed..d6420d224d09 100644 --- a/sound/isa/wavefront/wavefront_synth.c +++ b/sound/isa/wavefront/wavefront_synth.c @@ -1171,7 +1171,10 @@ wavefront_send_alias (snd_wavefront_t *dev, wavefront_patch_info *header) "alias for %d\n", header->number, header->hdr.a.OriginalSample); - + + if (header->number >= WF_MAX_SAMPLE) + return -EINVAL; + munge_int32 (header->number, &alias_hdr[0], 2); munge_int32 (header->hdr.a.OriginalSample, &alias_hdr[2], 2); munge_int32 (*((unsigned int *)&header->hdr.a.sampleStartOffset), @@ -1202,6 +1205,9 @@ wavefront_send_multisample (snd_wavefront_t *dev, wavefront_patch_info *header) int num_samples; unsigned char *msample_hdr;
+ if (header->number >= WF_MAX_SAMPLE) + return -EINVAL; + msample_hdr = kmalloc(WF_MSAMPLE_BYTES, GFP_KERNEL); if (! msample_hdr) return -ENOMEM;
From: Ard Biesheuvel ardb@kernel.org
[ Upstream commit d09ddd8190fbdc07696bf34b548ae15aa1816714 ]
When resizing a BAR, pci_reassign_bridge_resources() is invoked to bring the bridge windows of parent bridges in line with the new BAR assignment.
This assumes the device whose BAR is being resized lives on a subordinate bus, but this is not necessarily the case. A device may live on the root bus, in which case dev->bus->self is NULL, and passing a NULL pci_dev pointer to pci_reassign_bridge_resources() will cause it to crash.
So let's make the call to pci_reassign_bridge_resources() conditional on whether dev->bus->self is non-NULL in the first place.
Fixes: 8bb705e3e79d84e7 ("PCI: Add pci_resize_resource() for resizing BARs") Link: https://lore.kernel.org/r/20200421162256.26887-1-ardb@kernel.org Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Christian König christian.koenig@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/setup-res.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index d8ca40a97693..d21fa04fa44d 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -439,10 +439,11 @@ int pci_resize_resource(struct pci_dev *dev, int resno, int size) res->end = res->start + pci_rebar_size_to_bytes(size) - 1;
/* Check if the new config works by trying to assign everything. */ - ret = pci_reassign_bridge_resources(dev->bus->self, res->flags); - if (ret) - goto error_resize; - + if (dev->bus->self) { + ret = pci_reassign_bridge_resources(dev->bus->self, res->flags); + if (ret) + goto error_resize; + } return 0;
error_resize:
From: Viacheslav Dubeyko v.dubeiko@yadro.com
[ Upstream commit 803e45550b11c8e43d89812356fe6f105adebdf9 ]
The goal of the following command sequence is to restart the adapter. However, the tgt_stop flag remains set, indicating that the adapter is still in stopping state even after re-enabling it.
echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod modprobe tcm_qla2xxx mkdir /sys/kernel/config/target/qla2xxx mkdir /sys/kernel/config/target/qla2xxx/<port-name> mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
kernel: PID 1396:qla_target.c:1555 qlt_stop_phase1(): tgt_stop 0x0, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-e803:1: PID 1396:qla_target.c:1567: Stopping target for host 1(c0000000033557e8) kernel: PID 1396:qla_target.c:1579 qlt_stop_phase1(): tgt_stop 0x1, tgt_stopped 0x0 kernel: PID 1396:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-e801:1: PID 1396:qla_target.c:1316: Scheduling sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 <skipped> kernel: qla2xxx [0001:00:02.0]-290a:1: PID 340:qla_target.c:1187: qlt_unreg_sess sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7 <skipped> kernel: qla2xxx [0001:00:02.0]-f801:1: PID 340:qla_target.c:1145: Unregistration of sess c00000002d5cd800 21:00:00:24:ff:7f:35:c7 finished fcp_cnt 0 kernel: PID 340:qla_target.c:1155 qlt_free_session_done(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled. <skipped> kernel: qla2xxx [0001:00:02.0]-28f1:1: PID 346:qla_os.c:3956: Mark all dev lost kernel: PID 346:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end. <skipped> kernel: PID 1396:qla_target.c:6812 qlt_enable_vha(): tgt_stop 0x1, tgt_stopped 0x0 <skipped> kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled. <skipped> kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end.
qlt_handle_cmd_for_atio() rejects the request to send commands because the adapter is in the stopping state:
kernel: PID 0:qla_target.c:4442 qlt_handle_cmd_for_atio(): tgt_stop 0x1, tgt_stopped 0x0 kernel: qla2xxx [0001:00:02.0]-3861:1: PID 0:qla_target.c:4447: New command while device c000000005314600 is shutting down kernel: qla2xxx [0001:00:02.0]-e85f:1: PID 0:qla_target.c:5728: qla_target: Unable to send command to target
This patch calls qla_stop_phase2() in addition to qlt_stop_phase1() in tcm_qla2xxx_tpg_enable_store() and tcm_qla2xxx_npiv_tpg_enable_store(). The qlt_stop_phase1() marks adapter as stopping (tgt_stop == 0x1, tgt_stopped == 0x0) but qlt_stop_phase2() marks adapter as stopped (tgt_stop == 0x0, tgt_stopped == 0x1).
Link: https://lore.kernel.org/r/52be1e8a3537f6c5407eae3edd4c8e08a9545ea5.camel@yad... Reviewed-by: Roman Bolshakov r.bolshakov@yadro.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Viacheslav Dubeyko v.dubeiko@yadro.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index abe7f79bb789..744cd93189da 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -926,6 +926,7 @@ static ssize_t tcm_qla2xxx_tpg_enable_store(struct config_item *item,
atomic_set(&tpg->lport_tpg_enabled, 0); qlt_stop_phase1(vha->vha_tgt.qla_tgt); + qlt_stop_phase2(vha->vha_tgt.qla_tgt); }
return count; @@ -1088,6 +1089,7 @@ static ssize_t tcm_qla2xxx_npiv_tpg_enable_store(struct config_item *item,
atomic_set(&tpg->lport_tpg_enabled, 0); qlt_stop_phase1(vha->vha_tgt.qla_tgt); + qlt_stop_phase2(vha->vha_tgt.qla_tgt); }
return count;
From: Marco Felsch m.felsch@pengutronix.de
[ Upstream commit 255cdaf73412de13608fb776101402dca68bed2b ]
Since commit b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") offset-x and offset-y is supported. Devices using those offset parameters don't support the offset parameter so we need to add the NO_REGISTER check for edt_ft5x06_ts_get_defaults().
Fixes: b6eba86030bf ("Input: edt-ft5x06 - add offset support for ev-ft5726") Signed-off-by: Marco Felsch m.felsch@pengutronix.de Link: https://lore.kernel.org/r/20200227112819.16754-2-m.felsch@pengutronix.de Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/edt-ft5x06.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 240e8de24cd2..b41b97c962ed 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -935,19 +935,25 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
error = device_property_read_u32(dev, "offset", &val); if (!error) { - edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, val); + if (reg_addr->reg_offset != NO_REGISTER) + edt_ft5x06_register_write(tsdata, + reg_addr->reg_offset, val); tsdata->offset = val; }
error = device_property_read_u32(dev, "offset-x", &val); if (!error) { - edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x, val); + if (reg_addr->reg_offset_x != NO_REGISTER) + edt_ft5x06_register_write(tsdata, + reg_addr->reg_offset_x, val); tsdata->offset_x = val; }
error = device_property_read_u32(dev, "offset-y", &val); if (!error) { - edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y, val); + if (reg_addr->reg_offset_y != NO_REGISTER) + edt_ft5x06_register_write(tsdata, + reg_addr->reg_offset_y, val); tsdata->offset_y = val; } }
From: Christophe Leroy christophe.leroy@c-s.fr
[ Upstream commit edbadaf0671072298e506074128b64e003c5812c ]
When CONFIG_KASAN is selected, the stack usage is increased.
In the same way as x86 and arm64 architectures, increase THREAD_SHIFT when CONFIG_KASAN is selected.
Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support") Reported-by: erhard_f@mailbox.org Signed-off-by: Christophe Leroy christophe.leroy@c-s.fr Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://bugzilla.kernel.org/show_bug.cgi?id=207129 Link: https://lore.kernel.org/r/2c50f3b1c9bbaa4217c9a98f3044bd2a36c46a4f.158636127... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3dc5aecdd853..135d770e8e57 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -747,6 +747,7 @@ config THREAD_SHIFT range 13 15 default "15" if PPC_256K_PAGES default "14" if PPC64 + default "14" if KASAN default "13" help Used to define the stack size. The default is almost always what you
From: Qiushi Wu wu000273@umn.edu
[ Upstream commit 8816cd726a4fee197af2d851cbe25991ae19ea14 ]
In function mc13xxx_rtc_probe, the mc13xxx_unlock() is called before rtc_register_device(). But in the error path of rtc_register_device(), the mc13xxx_unlock() is called again, which causes a double-unlock problem. Thus add a call of the function “mc13xxx_lock” in an if branch for the completion of the exception handling.
Fixes: e4ae7023e182a ("rtc: mc13xxx: set range") Signed-off-by: Qiushi Wu wu000273@umn.edu Link: https://lore.kernel.org/r/20200503182235.1652-1-wu000273@umn.edu Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rtc/rtc-mc13xxx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-mc13xxx.c b/drivers/rtc/rtc-mc13xxx.c index afce2c0b4bd6..d6802e6191cb 100644 --- a/drivers/rtc/rtc-mc13xxx.c +++ b/drivers/rtc/rtc-mc13xxx.c @@ -308,8 +308,10 @@ static int __init mc13xxx_rtc_probe(struct platform_device *pdev) mc13xxx_unlock(mc13xxx);
ret = rtc_register_device(priv->rtc); - if (ret) + if (ret) { + mc13xxx_lock(mc13xxx); goto err_irq_request; + }
return 0;
From: Andreas Klinger ak@it-klinger.de
[ Upstream commit dee2dabc0e4115b80945fe2c91603e634f4b4686 ]
Limit the output of humidity compensation to the range between 0 and 100 percent.
Depending on the calibration parameters of the individual sensor it happens, that a humidity above 100 percent or below 0 percent is calculated, which don't make sense in terms of relative humidity.
Add a clamp to the compensation formula as described in the datasheet of the sensor in chapter 4.2.3.
Although this clamp is documented, it was never in the driver of the kernel.
It depends on the circumstances (calibration parameters, temperature, humidity) if one can see a value above 100 percent without the clamp. The writer of this patch was working with this type of sensor without noting this error. So it seems to be a rare event when this bug occures.
Signed-off-by: Andreas Klinger ak@it-klinger.de Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/pressure/bmp280-core.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 084a1d56cc2f..0a95afaa48fe 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -264,6 +264,8 @@ static u32 bmp280_compensate_humidity(struct bmp280_data *data, + (s32)2097152) * calib->H2 + 8192) >> 14); var -= ((((var >> 15) * (var >> 15)) >> 7) * (s32)calib->H1) >> 4;
+ var = clamp_val(var, 0, 419430400); + return var >> 12; };
From: Konstantin Khlebnikov khlebnikov@yandex-team.ru
[ Upstream commit baaa7ebf25c78c5cb712fac16b7f549100beddd3 ]
This reserved space isn't committed yet but cannot be used for allocations. For userspace it has no difference from used space.
See the same fix in ext4 commit f06925c73942 ("ext4: report delalloc reserve as non-free in statfs for project quota").
Fixes: ddc34e328d06 ("f2fs: introduce f2fs_statfs_project") Signed-off-by: Konstantin Khlebnikov khlebnikov@yandex-team.ru Reviewed-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 5e1d4d9243a9..47bfa5f2b75d 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -1219,7 +1219,8 @@ static int f2fs_statfs_project(struct super_block *sb, limit >>= sb->s_blocksize_bits;
if (limit && buf->f_blocks > limit) { - curblock = dquot->dq_dqb.dqb_curspace >> sb->s_blocksize_bits; + curblock = (dquot->dq_dqb.dqb_curspace + + dquot->dq_dqb.dqb_rsvspace) >> sb->s_blocksize_bits; buf->f_blocks = limit; buf->f_bfree = buf->f_bavail = (buf->f_blocks > curblock) ?
From: Russell King rmk+kernel@armlinux.org.uk
[ Upstream commit e81c979f4e071d516aa27cf5a0c3939da00dc1ca ]
If we timeout during a message transfer, the control register may contain bits that cause an action to be set. Read-modify-writing the register leaving these bits set may trigger the hardware to attempt one of these actions unintentionally.
Always clear these bits when cleaning up after a message or after a timeout.
Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-pxa.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 2c3c3d6935c0..c9cbc9894bac 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -706,11 +706,9 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) { u32 icr;
- /* - * Clear the STOP and ACK flags - */ + /* Clear the START, STOP, ACK, TB and MA flags */ icr = readl(_ICR(i2c)); - icr &= ~(ICR_STOP | ICR_ACKNAK); + icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA); writel(icr, _ICR(i2c)); }
From: Sibi Sankar sibis@codeaurora.org
[ Upstream commit be050a3429f46ecf13eb2b80f299479f8bb823fb ]
The application processor accessing the mpss region when the Q6 modem is running will lead to an XPU violation. Fix this by un-mapping the mpss segments post copy during mpss authentication and coredumps.
Tested-by: Evan Green evgreen@chromium.org Signed-off-by: Sibi Sankar sibis@codeaurora.org Link: https://lore.kernel.org/r/20200415071619.6052-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/remoteproc/qcom_q6v5_mss.c | 31 +++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index 6ba065d5c4d9..d84e9f306086 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -1005,7 +1005,13 @@ static int q6v5_mpss_load(struct q6v5 *qproc) goto release_firmware; }
- ptr = qproc->mpss_region + offset; + ptr = ioremap_wc(qproc->mpss_phys + offset, phdr->p_memsz); + if (!ptr) { + dev_err(qproc->dev, + "unable to map memory region: %pa+%zx-%x\n", + &qproc->mpss_phys, offset, phdr->p_memsz); + goto release_firmware; + }
if (phdr->p_filesz && phdr->p_offset < fw->size) { /* Firmware is large enough to be non-split */ @@ -1014,6 +1020,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc) "failed to load segment %d from truncated file %s\n", i, fw_name); ret = -EINVAL; + iounmap(ptr); goto release_firmware; }
@@ -1024,6 +1031,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc) ret = request_firmware(&seg_fw, fw_name, qproc->dev); if (ret) { dev_err(qproc->dev, "failed to load %s\n", fw_name); + iounmap(ptr); goto release_firmware; }
@@ -1036,6 +1044,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc) memset(ptr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz); } + iounmap(ptr); size += phdr->p_memsz; }
@@ -1075,7 +1084,8 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc, int ret = 0; struct q6v5 *qproc = rproc->priv; unsigned long mask = BIT((unsigned long)segment->priv); - void *ptr = rproc_da_to_va(rproc, segment->da, segment->size); + int offset = segment->da - qproc->mpss_reloc; + void *ptr = NULL;
/* Unlock mba before copying segments */ if (!qproc->dump_mba_loaded) { @@ -1089,10 +1099,15 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc, } }
- if (!ptr || ret) - memset(dest, 0xff, segment->size); - else + if (!ret) + ptr = ioremap_wc(qproc->mpss_phys + offset, segment->size); + + if (ptr) { memcpy(dest, ptr, segment->size); + iounmap(ptr); + } else { + memset(dest, 0xff, segment->size); + }
qproc->dump_segment_mask |= mask;
@@ -1393,12 +1408,6 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
qproc->mpss_phys = qproc->mpss_reloc = r.start; qproc->mpss_size = resource_size(&r); - qproc->mpss_region = devm_ioremap_wc(qproc->dev, qproc->mpss_phys, qproc->mpss_size); - if (!qproc->mpss_region) { - dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", - &r.start, qproc->mpss_size); - return -EBUSY; - }
return 0; }
From: Marek Szyprowski m.szyprowski@samsung.com
[ Upstream commit e47bd937e602bb4379546095d1bd0b9871fa60c2 ]
The TOP 'aclk*_isp', 'aclk550_cam', 'gscl_wa' and 'gscl_wb' clocks must be kept enabled all the time to allow proper access to power management control for the ISP and CAM power domains. The last two clocks, although related to GScaler device and GSCL power domain, provides also the I_WRAP_CLK signal to MIPI CSIS0/1 devices, which are a part of CAM power domain and are needed for proper power on/off sequence.
Currently there are no drivers for the devices, which are part of CAM and ISP power domains yet. This patch only fixes the race between disabling the unused power domains and disabling unused clocks, which randomly resulted in the following error during boot:
Power domain CAM disable failed Power domain ISP disable failed
Fixes: 318fa46cc60d ("clk/samsung: exynos542x: mark some clocks as critical") Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Acked-by: Chanwoo Choi cw00.choi@samsung.com Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/samsung/clk-exynos5420.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 27fd274e92f8..dfef5f0833db 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -540,7 +540,7 @@ static const struct samsung_div_clock exynos5800_div_clks[] __initconst = {
static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = { GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam", - GATE_BUS_TOP, 24, 0, 0), + GATE_BUS_TOP, 24, CLK_IS_CRITICAL, 0), GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler", GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0), }; @@ -940,25 +940,25 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg", GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0", - GATE_BUS_TOP, 5, 0, 0), + GATE_BUS_TOP, 5, CLK_IS_CRITICAL, 0), GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl", GATE_BUS_TOP, 6, CLK_IS_CRITICAL, 0), GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl", GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp", - GATE_BUS_TOP, 8, 0, 0), + GATE_BUS_TOP, 8, CLK_IS_CRITICAL, 0), GATE(CLK_PCLK66_GPIO, "pclk66_gpio", "mout_user_pclk66_gpio", GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen", GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk266_isp", "mout_user_aclk266_isp", - GATE_BUS_TOP, 13, 0, 0), + GATE_BUS_TOP, 13, CLK_IS_CRITICAL, 0), GATE(0, "aclk166", "mout_user_aclk166", GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0), GATE(CLK_ACLK333, "aclk333", "mout_user_aclk333", GATE_BUS_TOP, 15, CLK_IS_CRITICAL, 0), GATE(0, "aclk400_isp", "mout_user_aclk400_isp", - GATE_BUS_TOP, 16, 0, 0), + GATE_BUS_TOP, 16, CLK_IS_CRITICAL, 0), GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl", GATE_BUS_TOP, 17, CLK_IS_CRITICAL, 0), GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1", @@ -1158,8 +1158,10 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { GATE_IP_GSCL1, 3, 0, 0), GATE(CLK_SMMU_FIMCL1, "smmu_fimcl1", "dout_gscl_blk_333", GATE_IP_GSCL1, 4, 0, 0), - GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, 0, 0), - GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, 0, 0), + GATE(CLK_GSCL_WA, "gscl_wa", "sclk_gscl_wa", GATE_IP_GSCL1, 12, + CLK_IS_CRITICAL, 0), + GATE(CLK_GSCL_WB, "gscl_wb", "sclk_gscl_wb", GATE_IP_GSCL1, 13, + CLK_IS_CRITICAL, 0), GATE(CLK_SMMU_FIMCL3, "smmu_fimcl3,", "dout_gscl_blk_333", GATE_IP_GSCL1, 16, 0, 0), GATE(CLK_FIMC_LITE3, "fimc_lite3", "aclk333_432_gscl",
From: Oliver Neukum oneukum@suse.com
[ Upstream commit 296a193b06120aa6ae7cf5c0d7b5e5b55968026e ]
syzkaller reported an URB that should have been killed to be active. We do not understand it, but this should fix the issue if it is real.
Signed-off-by: Oliver Neukum oneukum@suse.com Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200507085806.5793-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/class/usblp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 0d8e3f3804a3..084c48c5848f 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -468,7 +468,8 @@ static int usblp_release(struct inode *inode, struct file *file) usb_autopm_put_interface(usblp->intf);
if (!usblp->present) /* finish cleanup from disconnect */ - usblp_cleanup(usblp); + usblp_cleanup(usblp); /* any URBs must be dead */ + mutex_unlock(&usblp_mutex); return 0; } @@ -1375,9 +1376,11 @@ static void usblp_disconnect(struct usb_interface *intf)
usblp_unlink_urbs(usblp); mutex_unlock(&usblp->mut); + usb_poison_anchored_urbs(&usblp->urbs);
if (!usblp->used) usblp_cleanup(usblp); + mutex_unlock(&usblp_mutex); }
From: Serge Semin Sergey.Semin@baikalelectronics.ru
[ Upstream commit 7b668c064ec33f3d687c3a413d05e355172e6c92 ]
Standard 8250 UART ports are designed in a way so they can communicate with baud rates up to 1/16 of a reference frequency. It's expected from most of the currently supported UART controllers. That's why the former version of serial8250_get_baud_rate() method called uart_get_baud_rate() with min and max baud rates passed as (port->uartclk / 16 / UART_DIV_MAX) and ((port->uartclk + tolerance) / 16) respectively. Doing otherwise, like it was suggested in commit ("serial: 8250_mtk: support big baud rate."), caused acceptance of bauds, which was higher than the normal UART controllers actually supported. As a result if some user-space program requested to set a baud greater than (uartclk / 16) it would have been permitted without truncation, but then serial8250_get_divisor(baud) (which calls uart_get_divisor() to get the reference clock divisor) would have returned a zero divisor. Setting zero divisor will cause an unpredictable effect varying from chip to chip. In case of DW APB UART the communications just stop.
Lets fix this problem by getting back the limitation of (uartclk + tolerance) / 16 maximum baud supported by the generic 8250 port. Mediatek 8250 UART ports driver developer shouldn't have touched it in the first place notably seeing he already provided a custom version of set_termios() callback in that glue-driver which took into account the extended baud rate values and accordingly updated the standard and vendor-specific divisor latch registers anyway.
Fixes: 81bb549fdf14 ("serial: 8250_mtk: support big baud rate.") Signed-off-by: Serge Semin Sergey.Semin@baikalelectronics.ru Cc: Alexey Malahov Alexey.Malahov@baikalelectronics.ru Cc: Thomas Bogendoerfer tsbogend@alpha.franken.de Cc: Paul Burton paulburton@kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: Arnd Bergmann arnd@arndb.de Cc: Long Cheng long.cheng@mediatek.com Cc: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: Maxime Ripard mripard@kernel.org Cc: Catalin Marinas catalin.marinas@arm.com Cc: Will Deacon will@kernel.org Cc: Russell King linux@armlinux.org.uk Cc: linux-mips@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: https://lore.kernel.org/r/20200506233136.11842-2-Sergey.Semin@baikalelectron... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/8250/8250_port.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 2c65c775bf5a..dbb27303a6b4 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2539,6 +2539,8 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + unsigned int tolerance = port->uartclk / 100; + /* * Ask the core to calculate the divisor for us. * Allow 1% tolerance at the upper limit so uart clks marginally @@ -2547,7 +2549,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, */ return uart_get_baud_rate(port, termios, old, port->uartclk / 16 / UART_DIV_MAX, - port->uartclk); + (port->uartclk + tolerance) / 16); }
void
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
[ Upstream commit 0978de9fc7335c73934ab8fac189fb4cb3f23191 ]
fastrpc_channel_ctx is not freed if misc_register() fails, this would lead to a memory leak. Fix this leak by adding kfree in misc_register() error path.
Fixes: 278d56f970ae ("misc: fastrpc: Reference count channel context") Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20200511162722.2552-1-srinivas.kandagatla@linaro.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/fastrpc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c index 842f2210dc7e..ee3291f7e615 100644 --- a/drivers/misc/fastrpc.c +++ b/drivers/misc/fastrpc.c @@ -1434,8 +1434,10 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev) domains[domain_id]); data->miscdev.fops = &fastrpc_fops; err = misc_register(&data->miscdev); - if (err) + if (err) { + kfree(data); return err; + }
kref_init(&data->refcount);
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
[ Upstream commit 74003385cf716f1b88cc7753ca282f5493f204a2 ]
fastrpc_invoke_ctx can have refcount of 2 in error path where rpmsg_send() fails to send invoke message. decrement the refcount properly in the error path to fix this leak.
This also fixes below static checker warning:
drivers/misc/fastrpc.c:990 fastrpc_internal_invoke() warn: 'ctx->refcount.refcount.ref.counter' not decremented on lines: 990.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context") Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20200512110930.2550-1-srinivas.kandagatla@linaro.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/fastrpc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c index ee3291f7e615..3a5d2890fe2a 100644 --- a/drivers/misc/fastrpc.c +++ b/drivers/misc/fastrpc.c @@ -886,6 +886,7 @@ static int fastrpc_invoke_send(struct fastrpc_session_ctx *sctx, struct fastrpc_channel_ctx *cctx; struct fastrpc_user *fl = ctx->fl; struct fastrpc_msg *msg = &ctx->msg; + int ret;
cctx = fl->cctx; msg->pid = fl->tgid; @@ -901,7 +902,13 @@ static int fastrpc_invoke_send(struct fastrpc_session_ctx *sctx, msg->size = roundup(ctx->msg_sz, PAGE_SIZE); fastrpc_context_get(ctx);
- return rpmsg_send(cctx->rpdev->ept, (void *)msg, sizeof(*msg)); + ret = rpmsg_send(cctx->rpdev->ept, (void *)msg, sizeof(*msg)); + + if (ret) + fastrpc_context_put(ctx); + + return ret; + }
static int fastrpc_internal_invoke(struct fastrpc_user *fl, u32 kernel,
From: Martin Wilck mwilck@suse.com
[ Upstream commit 2361ae595352dec015d14292f1b539242d8446d6 ]
SCSI LUN passthrough code such as qemu's "scsi-block" device model pass every IO to the host via SG_IO ioctls. Currently, dm-multipath calls choose_pgpath() only in the block IO code path, not in the ioctl code path (unless current_pgpath is NULL). This has the effect that no path switching and thus no load balancing is done for SCSI-passthrough IO, unless the active path fails.
Fix this by using the same logic in multipath_prepare_ioctl() as in multipath_clone_and_map().
Note: The allegedly best path selection algorithm, service-time, still wouldn't work perfectly, because the io size of the current request is always set to 0. Changing that for the IO passthrough case would require the ioctl cmd and arg to be passed to dm's prepare_ioctl() method.
Signed-off-by: Martin Wilck mwilck@suse.com Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-mpath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 456d790c918c..f2de4c73cc8f 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1856,7 +1856,7 @@ static int multipath_prepare_ioctl(struct dm_target *ti, int r;
current_pgpath = READ_ONCE(m->current_pgpath); - if (!current_pgpath) + if (!current_pgpath || !test_bit(MPATHF_QUEUE_IO, &m->flags)) current_pgpath = choose_pgpath(m, 0);
if (current_pgpath) {
From: Marek Behún marek.behun@nic.cz
[ Upstream commit 7a2c36b039d2343cc29fec6102da839477b8dc60 ]
Use sdhci-caps-mask to forbid SDR104 mode on the SDIO capable SDHCI controller. Without this the device cannot pass electromagnetic interference certifications.
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Signed-off-by: Marek Behún marek.behun@nic.cz Cc: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 5f350cc71a2f..01f66056d7d5 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -171,6 +171,8 @@ &sdhci1 { marvell,pad-type = "sd"; vqmmc-supply = <&vsdio_reg>; mmc-pwrseq = <&sdhci1_pwrseq>; + /* forbid SDR104 for FCC purposes */ + sdhci-caps-mask = <0x2 0x0>; status = "okay"; };
From: Marek Behún marek.behun@nic.cz
[ Upstream commit c2671acbbbd822ef077cc168991e0a7dbe2172c9 ]
The sfp compatible should be 'sff,sfp', not 'sff,sfp+'. We used patched kernel where the latter was working.
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Signed-off-by: Marek Behún marek.behun@nic.cz Cc: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 01f66056d7d5..c3668187b844 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -95,7 +95,7 @@ sdhci1_pwrseq: sdhci1-pwrseq { };
sfp: sfp { - compatible = "sff,sfp+"; + compatible = "sff,sfp"; i2c-bus = <&i2c0>; los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
From: Andre Przywara andre.przywara@arm.com
[ Upstream commit a78aee9e434932a500db36cc6d88daeff3745e9f ]
The GIC DT nodes for the Juno boards were not fully compliant with the DT binding, which has certain expectations about child nodes and their size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding requests, and adjust the reg properties accordingly. This requires adjusting the interrupt nexus nodes as well, as one field of the interrupt-map property depends on the GIC's address-size.
Link: https://lore.kernel.org/r/20200513103016.130417-10-andre.przywara@arm.com Signed-off-by: Andre Przywara andre.przywara@arm.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/arm/juno-base.dtsi | 50 +++++++++++++------------- 1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8c11660bbe40..c47f76b01c4b 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -62,35 +62,35 @@ gic: interrupt-controller@2c010000 { <0x0 0x2c02f000 0 0x2000>, <0x0 0x2c04f000 0 0x2000>, <0x0 0x2c06f000 0 0x2000>; - #address-cells = <2>; + #address-cells = <1>; #interrupt-cells = <3>; - #size-cells = <2>; + #size-cells = <1>; interrupt-controller; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; - ranges = <0 0 0 0x2c1c0000 0 0x40000>; + ranges = <0 0 0x2c1c0000 0x40000>;
v2m_0: v2m@0 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0 0 0x10000>; + reg = <0 0x10000>; };
v2m@10000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0x10000 0 0x10000>; + reg = <0x10000 0x10000>; };
v2m@20000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0x20000 0 0x10000>; + reg = <0x20000 0x10000>; };
v2m@30000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0x30000 0 0x10000>; + reg = <0x30000 0x10000>; }; };
@@ -519,10 +519,10 @@ pcie_ctlr: pcie@40000000 { <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &gic 0 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &gic 0 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &gic 0 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; msi-parent = <&v2m_0>; status = "disabled"; iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ @@ -786,19 +786,19 @@ smb@8000000 {
#interrupt-cells = <1>; interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; };
site2: tlx@60000000 { @@ -808,6 +808,6 @@ site2: tlx@60000000 { ranges = <0 0 0x60000000 0x10000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0>; - interrupt-map = <0 0 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; }; };
From: Lars Povlsen lars.povlsen@microchip.com
[ Upstream commit 0b47afc65453a70bc521e251138418056f65793f ]
This fixes a problem with using the GPIO as an interrupt on Jaguar2 (and similar), as the register layout of the platforms with 64 GPIO's are pairwise, such that the original offset must be multiplied with the platform stride.
Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support. Reviewed-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Lars Povlsen lars.povlsen@microchip.com Link: https://lore.kernel.org/r/20200513125532.24585-4-lars.povlsen@microchip.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-ocelot.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c index fb76fb2e9ea5..0a951a75c82b 100644 --- a/drivers/pinctrl/pinctrl-ocelot.c +++ b/drivers/pinctrl/pinctrl-ocelot.c @@ -711,11 +711,12 @@ static void ocelot_irq_handler(struct irq_desc *desc) struct irq_chip *parent_chip = irq_desc_get_chip(desc); struct gpio_chip *chip = irq_desc_get_handler_data(desc); struct ocelot_pinctrl *info = gpiochip_get_data(chip); + unsigned int id_reg = OCELOT_GPIO_INTR_IDENT * info->stride; unsigned int reg = 0, irq, i; unsigned long irqs;
for (i = 0; i < info->stride; i++) { - regmap_read(info->map, OCELOT_GPIO_INTR_IDENT + 4 * i, ®); + regmap_read(info->map, id_reg + 4 * i, ®); if (!reg) continue;
From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit ace342097768e35fd41934285604fa97da1e235a ]
On SoCs with Standby Control Registers (STBCRs) instead of Module Stop Control Registers (MSTPCRs), the suspend handler saves the wrong registers, and the resume handler prints the wrong register in an error message.
Fortunately this cannot happen yet, as the suspend/resume code is used on PSCI systems only, and systems with STBCRs (RZ/A1 and RZ/A2) do not use PSCI. Still, it is better to fix this, to avoid this becoming a problem in the future.
Distinguish between STBCRs and MSTPCRs where needed. Replace the useless printing of the virtual register address in the resume error message by printing the register index.
Fixes: fde35c9c7db5732c ("clk: renesas: cpg-mssr: Add R7S9210 support") Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://lore.kernel.org/r/20200507074713.30113-1-geert+renesas@glider.be Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/renesas/renesas-cpg-mssr.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index 132cc96895e3..6f9612c169af 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -800,7 +800,8 @@ static int cpg_mssr_suspend_noirq(struct device *dev) /* Save module registers with bits under our control */ for (reg = 0; reg < ARRAY_SIZE(priv->smstpcr_saved); reg++) { if (priv->smstpcr_saved[reg].mask) - priv->smstpcr_saved[reg].val = + priv->smstpcr_saved[reg].val = priv->stbyctrl ? + readb(priv->base + STBCR(reg)) : readl(priv->base + SMSTPCR(reg)); }
@@ -860,8 +861,9 @@ static int cpg_mssr_resume_noirq(struct device *dev) }
if (!i) - dev_warn(dev, "Failed to enable SMSTP %p[0x%x]\n", - priv->base + SMSTPCR(reg), oldval & mask); + dev_warn(dev, "Failed to enable %s%u[0x%x]\n", + priv->stbyctrl ? "STB" : "SMSTP", reg, + oldval & mask); }
return 0;
From: Daniel Baluta daniel.baluta@nxp.com
[ Upstream commit c26fde3b15ed41f5f452f1da727795f787833287 ]
This provides a better separation between runtime and PM sleep callbacks.
Only do nothing if given runtime flag is set and calback is not set.
With the current implementation, if PM sleep callback is set but runtime callback is not set then at runtime resume we reload the firmware even if we do not support runtime resume callback.
Signed-off-by: Daniel Baluta daniel.baluta@nxp.com Signed-off-by: Kai Vehmanen kai.vehmanen@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Link: https://lore.kernel.org/r/20200515135958.17511-2-kai.vehmanen@linux.intel.co... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/pm.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c index 195af259e78e..128680b09c20 100644 --- a/sound/soc/sof/pm.c +++ b/sound/soc/sof/pm.c @@ -266,7 +266,10 @@ static int sof_resume(struct device *dev, bool runtime_resume) int ret;
/* do nothing if dsp resume callbacks are not set */ - if (!sof_ops(sdev)->resume || !sof_ops(sdev)->runtime_resume) + if (!runtime_resume && !sof_ops(sdev)->resume) + return 0; + + if (runtime_resume && !sof_ops(sdev)->runtime_resume) return 0;
/* DSP was never successfully started, nothing to resume */ @@ -346,7 +349,10 @@ static int sof_suspend(struct device *dev, bool runtime_suspend) int ret;
/* do nothing if dsp suspend callback is not set */ - if (!sof_ops(sdev)->suspend) + if (!runtime_suspend && !sof_ops(sdev)->suspend) + return 0; + + if (runtime_suspend && !sof_ops(sdev)->runtime_suspend) return 0;
if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
From: Andre Przywara andre.przywara@arm.com
[ Upstream commit 78631aecc52c4b2adcf611769df2ff9c67ac16d0 ]
The GIC DT nodes for the fastmodels were not fully compliant with the DT binding, which has certain expectations about child nodes and their size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding requests, and adjust the reg properties accordingly. This requires adjusting the interrupt nexus nodes as well, as one field of the interrupt-map property depends on the GIC's address-size.
Since the .dts files share interrupt nexus nodes across different interrupt controllers (GICv2 vs. GICv3), we need to use the only commonly allowed #address-size value of <1> for both.
Link: https://lore.kernel.org/r/20200513103016.130417-11-andre.przywara@arm.com Signed-off-by: Andre Przywara andre.przywara@arm.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../boot/dts/arm/foundation-v8-gicv2.dtsi | 2 +- .../boot/dts/arm/foundation-v8-gicv3.dtsi | 8 +- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 86 +++++++++---------- 3 files changed, 48 insertions(+), 48 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi index 15fe81738e94..dfb23dfc0b0f 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi @@ -8,7 +8,7 @@ / { gic: interrupt-controller@2c001000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <2>; + #address-cells = <1>; interrupt-controller; reg = <0x0 0x2c001000 0 0x1000>, <0x0 0x2c002000 0 0x2000>, diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi index f2c75c756039..906f51935b36 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi @@ -8,9 +8,9 @@ / { gic: interrupt-controller@2f000000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x2f000000 0x100000>; interrupt-controller; reg = <0x0 0x2f000000 0x0 0x10000>, <0x0 0x2f100000 0x0 0x200000>, @@ -22,7 +22,7 @@ gic: interrupt-controller@2f000000 { its: its@2f020000 { compatible = "arm,gic-v3-its"; msi-controller; - reg = <0x0 0x2f020000 0x0 0x20000>; + reg = <0x20000 0x20000>; }; }; }; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 3f78373f708a..2a6aa43241b3 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -107,49 +107,49 @@ smb@8000000 {
#interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, - <0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, - <0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, - <0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 &gic 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ethernet@2,02000000 { compatible = "smsc,lan91c111";
From: Pali Rohár pali@kernel.org
[ Upstream commit 90c6cb4a355e7befcb557d217d1d8b8bd5875a05 ]
Trying to change Link Status register does not have any effect as this is a read-only register. Trying to overwrite bits for Negotiated Link Width does not make sense.
In future proper change of link width can be done via Lane Count Select bits in PCIe Control 0 register.
Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link Control register is wrong. There should be at least some detection if endpoint supports L0s as isn't mandatory.
Moreover ASPM Control bits in Link Control register are controlled by pcie/aspm.c code which sets it according to system ASPM settings, immediately after aardvark driver probes. So setting these bits by aardvark driver has no long running effect.
Remove code which touches ASPM L0s bits from this driver and let kernel's ASPM implementation to set ASPM state properly.
Some users are reporting issues that this code is problematic for some Intel wifi cards and removing it fixes them, see e.g.: https://bugzilla.kernel.org/show_bug.cgi?id=196339
If problems with Intel wifi cards occur even after this commit, then pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state for affected problematic cards.
Link: https://lore.kernel.org/r/20200430080625.26070-3-pali@kernel.org Tested-by: Tomasz Maciej Nowak tmn505@gmail.com Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Acked-by: Rob Herring robh@kernel.org Acked-by: Thomas Petazzoni thomas.petazzoni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-aardvark.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 97245e076548..f2481e80e272 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -344,10 +344,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
advk_pcie_wait_for_link(pcie);
- reg = PCIE_CORE_LINK_L0S_ENTRY | - (1 << PCIE_CORE_LINK_WIDTH_SHIFT); - advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG); - reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG); reg |= PCIE_CORE_CMD_MEM_ACCESS_EN | PCIE_CORE_CMD_IO_ACCESS_EN |
From: Emmanuel Nicolet emmanuel.nicolet@gmail.com
[ Upstream commit 720bc316690bd27dea9d71510b50f0cd698ffc32 ]
Since commit dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count"), the kernel will bug_on on the PS3 because bio_split() is called with sectors == 0:
kernel BUG at block/bio.c:1853! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash PREEMPT SMP NR_CPUS=8 NUMA PS3 Modules linked in: firewire_sbp2 rtc_ps3(+) soundcore ps3_gelic(+) \ ps3rom(+) firewire_core ps3vram(+) usb_common crc_itu_t CPU: 0 PID: 97 Comm: blkid Not tainted 5.3.0-rc4 #1 NIP: c00000000027d0d0 LR: c00000000027d0b0 CTR: 0000000000000000 REGS: c00000000135ae90 TRAP: 0700 Not tainted (5.3.0-rc4) MSR: 8000000000028032 <SF,EE,IR,DR,RI> CR: 44008240 XER: 20000000 IRQMASK: 0 GPR00: c000000000289368 c00000000135b120 c00000000084a500 c000000004ff8300 GPR04: 0000000000000c00 c000000004c905e0 c000000004c905e0 000000000000ffff GPR08: 0000000000000000 0000000000000001 0000000000000000 000000000000ffff GPR12: 0000000000000000 c0000000008ef000 000000000000003e 0000000000080001 GPR16: 0000000000000100 000000000000ffff 0000000000000000 0000000000000004 GPR20: c00000000062fd7e 0000000000000001 000000000000ffff 0000000000000080 GPR24: c000000000781788 c00000000135b350 0000000000000080 c000000004c905e0 GPR28: c00000000135b348 c000000004ff8300 0000000000000000 c000000004c90000 NIP [c00000000027d0d0] .bio_split+0x28/0xac LR [c00000000027d0b0] .bio_split+0x8/0xac Call Trace: [c00000000135b120] [c00000000027d130] .bio_split+0x88/0xac (unreliable) [c00000000135b1b0] [c000000000289368] .__blk_queue_split+0x11c/0x53c [c00000000135b2d0] [c00000000028f614] .blk_mq_make_request+0x80/0x7d4 [c00000000135b3d0] [c000000000283a8c] .generic_make_request+0x118/0x294 [c00000000135b4b0] [c000000000283d34] .submit_bio+0x12c/0x174 [c00000000135b580] [c000000000205a44] .mpage_bio_submit+0x3c/0x4c [c00000000135b600] [c000000000206184] .mpage_readpages+0xa4/0x184 [c00000000135b750] [c0000000001ff8fc] .blkdev_readpages+0x24/0x38 [c00000000135b7c0] [c0000000001589f0] .read_pages+0x6c/0x1a8 [c00000000135b8b0] [c000000000158c74] .__do_page_cache_readahead+0x118/0x184 [c00000000135b9b0] [c0000000001591a8] .force_page_cache_readahead+0xe4/0xe8 [c00000000135ba50] [c00000000014fc24] .generic_file_read_iter+0x1d8/0x830 [c00000000135bb50] [c0000000001ffadc] .blkdev_read_iter+0x40/0x5c [c00000000135bbc0] [c0000000001b9e00] .new_sync_read+0x144/0x1a0 [c00000000135bcd0] [c0000000001bc454] .vfs_read+0xa0/0x124 [c00000000135bd70] [c0000000001bc7a4] .ksys_read+0x70/0xd8 [c00000000135be20] [c00000000000a524] system_call+0x5c/0x70 Instruction dump: 7fe3fb78 482e30dc 7c0802a6 482e3085 7c9e2378 f821ff71 7ca42b78 7d3e00d0 7c7d1b78 79290fe0 7cc53378 69290001 <0b090000> 81230028 7bca0020 7929ba62 [ end trace 313fec760f30aa1f ]---
The problem originates from setting the segment boundary of the request queue to -1UL. This makes get_max_segment_size() return zero when offset is zero, whatever the max segment size. The test with BLK_SEG_BOUNDARY_MASK fails and 'mask - (mask & offset) + 1' overflows to zero in the return statement.
Not setting the segment boundary and using the default value (BLK_SEG_BOUNDARY_MASK) fixes the problem.
Signed-off-by: Emmanuel Nicolet emmanuel.nicolet@gmail.com Signed-off-by: Geoff Levand geoff@infradead.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/060a416c43138f45105c0540eff1a45539f7e2fc.158904925... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/ps3disk.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index c5c6487a19d5..7b55811c2a81 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -454,7 +454,6 @@ static int ps3disk_probe(struct ps3_system_bus_device *_dev) queue->queuedata = dev;
blk_queue_max_hw_sectors(queue, dev->bounce_size >> 9); - blk_queue_segment_boundary(queue, -1UL); blk_queue_dma_alignment(queue, dev->blk_size-1); blk_queue_logical_block_size(queue, dev->blk_size);
From: Andre Przywara andre.przywara@arm.com
[ Upstream commit bb5cce12ac717c7462217cd493ed701d12d6dbce ]
The Arm Ltd. boards were using an outdated address convention in the DT node names, by separating the high from the low 32-bits of an address by a comma.
Remove the comma from the node name suffix to be DT spec compliant.
Link: https://lore.kernel.org/r/20200513103016.130417-3-andre.przywara@arm.com Signed-off-by: Andre Przywara andre.przywara@arm.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 10 +++++----- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 4 ++-- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 6 +++--- arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi | 2 +- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 6 +++--- 5 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index dfae90adbb7c..ce64bfb22f22 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -31,7 +31,7 @@ motherboard { #interrupt-cells = <1>; ranges;
- nor_flash: flash@0,00000000 { + nor_flash: flash@0 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; @@ -41,13 +41,13 @@ partitions { }; };
- psram@1,00000000 { + psram@100000000 { compatible = "arm,vexpress-psram", "mtd-ram"; reg = <1 0x00000000 0x02000000>; bank-width = <4>; };
- ethernet@2,02000000 { + ethernet@202000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x02000000 0x10000>; interrupts = <15>; @@ -59,14 +59,14 @@ ethernet@2,02000000 { vddvario-supply = <&v2m_fixed_3v3>; };
- usb@2,03000000 { + usb@203000000 { compatible = "nxp,usb-isp1761"; reg = <2 0x03000000 0x20000>; interrupts = <16>; port1-otg; };
- iofpga@3,00000000 { + iofpga@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 2a6aa43241b3..05d1657170b4 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -151,7 +151,7 @@ smb@8000000 { <0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- ethernet@2,02000000 { + ethernet@202000000 { compatible = "smsc,lan91c111"; reg = <2 0x02000000 0x10000>; interrupts = <15>; @@ -178,7 +178,7 @@ v2m_refclk32khz: refclk32khz { clock-output-names = "v2m:refclk32khz"; };
- iofpga@3,00000000 { + iofpga@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 9f60dacb4f80..1234a8cfc0a9 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -103,7 +103,7 @@ nmi-button { }; };
- flash@0,00000000 { + flash@0 { /* 2 * 32MiB NOR Flash memory mounted on CS0 */ compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>; @@ -120,7 +120,7 @@ partitions { }; };
- ethernet@2,00000000 { + ethernet@200000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x00000000 0x10000>; interrupts = <3>; @@ -133,7 +133,7 @@ ethernet@2,00000000 { vddvario-supply = <&mb_fixed_3v3>; };
- iofpga@3,00000000 { + iofpga@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi index 57b0b9d7f3fa..29e6962c70bd 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi @@ -9,7 +9,7 @@ smb@8000000 { motherboard { arm,v2m-memory-map = "rs2";
- iofpga@3,00000000 { + iofpga@300000000 { virtio-p9@140000 { compatible = "virtio,mmio"; reg = <0x140000 0x200>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 03a7bf079c8f..ad20076357f5 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -17,14 +17,14 @@ motherboard { #interrupt-cells = <1>; ranges;
- flash@0,00000000 { + flash@0 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; bank-width = <4>; };
- ethernet@2,02000000 { + ethernet@202000000 { compatible = "smsc,lan91c111"; reg = <2 0x02000000 0x10000>; interrupts = <15>; @@ -51,7 +51,7 @@ v2m_refclk32khz: refclk32khz { clock-output-names = "v2m:refclk32khz"; };
- iofpga@3,00000000 { + iofpga@300000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
From: Qian Cai cai@lca.pw
[ Upstream commit 3e63b94b6274324ff2e7d8615df31586de827c4e ]
vfio_pci_disable() calls vfio_config_free() but forgets to call free_perm_bits() resulting in memory leaks,
unreferenced object 0xc000000c4db2dee0 (size 16): comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s) hex dump (first 16 bytes): 00 00 ff 00 ff ff ff ff ff ff ff ff ff ff 00 00 ................ backtrace: [<00000000a6a4552d>] alloc_perm_bits+0x58/0xe0 [vfio_pci] [<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci] init_pci_cap_msi_perm at drivers/vfio/pci/vfio_pci_config.c:1125 (inlined by) vfio_msi_cap_len at drivers/vfio/pci/vfio_pci_config.c:1180 (inlined by) vfio_cap_len at drivers/vfio/pci/vfio_pci_config.c:1241 (inlined by) vfio_cap_init at drivers/vfio/pci/vfio_pci_config.c:1468 (inlined by) vfio_config_init at drivers/vfio/pci/vfio_pci_config.c:1707 [<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci] [<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio] [<000000009e34c54f>] ksys_ioctl+0xd8/0x130 [<000000006577923d>] sys_ioctl+0x28/0x40 [<000000006d7b1cf2>] system_call_exception+0x114/0x1e0 [<0000000008ea7dd5>] system_call_common+0xf0/0x278 unreferenced object 0xc000000c4db2e330 (size 16): comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s) hex dump (first 16 bytes): 00 ff ff 00 ff ff ff ff ff ff ff ff ff ff 00 00 ................ backtrace: [<000000004c71914f>] alloc_perm_bits+0x44/0xe0 [vfio_pci] [<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci] [<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci] [<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio] [<000000009e34c54f>] ksys_ioctl+0xd8/0x130 [<000000006577923d>] sys_ioctl+0x28/0x40 [<000000006d7b1cf2>] system_call_exception+0x114/0x1e0 [<0000000008ea7dd5>] system_call_common+0xf0/0x278
Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver") Signed-off-by: Qian Cai cai@lca.pw [aw: rolled in follow-up patch] Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/pci/vfio_pci_config.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c index f0891bd8444c..c4d0cf9a1ab9 100644 --- a/drivers/vfio/pci/vfio_pci_config.c +++ b/drivers/vfio/pci/vfio_pci_config.c @@ -1726,8 +1726,11 @@ void vfio_config_free(struct vfio_pci_device *vdev) vdev->vconfig = NULL; kfree(vdev->pci_config_map); vdev->pci_config_map = NULL; - kfree(vdev->msi_perm); - vdev->msi_perm = NULL; + if (vdev->msi_perm) { + free_perm_bits(vdev->msi_perm); + kfree(vdev->msi_perm); + vdev->msi_perm = NULL; + } }
/*
From: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org
[ Upstream commit 347adb0d6385c3220dc01ab61807a5b1892901cc ]
On some QCOM platforms like SC7180, SDM845 and SM8150, reading TMC mode register without proper coresight power management can lead to async exceptions like the one in the call trace below in tmc_read_prepare_etb(). This can happen if the user tries to read the TMC etf data via device node without setting up source and the sink first. Fix this by having a check for coresight sysfs mode before reading TMC mode management register.
Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 7 PID: 2605 Comm: hexdump Tainted: G S 5.4.30 #122 Call trace: dump_backtrace+0x0/0x188 show_stack+0x20/0x2c dump_stack+0xdc/0x144 panic+0x168/0x36c panic+0x0/0x36c arm64_serror_panic+0x78/0x84 do_serror+0x130/0x138 el1_error+0x84/0xf8 tmc_read_prepare_etb+0x88/0xb8 tmc_open+0x40/0xd8 misc_open+0x120/0x158 chrdev_open+0xb8/0x1a4 do_dentry_open+0x268/0x3a0 vfs_open+0x34/0x40 path_openat+0x39c/0xdf4 do_filp_open+0x90/0x10c do_sys_open+0x150/0x3e8 __arm64_compat_sys_openat+0x28/0x34 el0_svc_common+0xa8/0x160 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x10
Fixes: 4525412a5046 ("coresight: tmc: making prepare/unprepare functions generic") Reported-by: Stephen Boyd swboyd@chromium.org Suggested-by: Mathieu Poirier mathieu.poirier@linaro.org Signed-off-by: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Link: https://lore.kernel.org/r/20200518180242.7916-14-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwtracing/coresight/coresight-tmc-etf.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index d0cc3985b72a..36cce2bfb744 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -596,13 +596,6 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata) goto out; }
- /* There is no point in reading a TMC in HW FIFO mode */ - mode = readl_relaxed(drvdata->base + TMC_MODE); - if (mode != TMC_MODE_CIRCULAR_BUFFER) { - ret = -EINVAL; - goto out; - } - /* Don't interfere if operated from Perf */ if (drvdata->mode == CS_MODE_PERF) { ret = -EINVAL; @@ -616,8 +609,15 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata) }
/* Disable the TMC if need be */ - if (drvdata->mode == CS_MODE_SYSFS) + if (drvdata->mode == CS_MODE_SYSFS) { + /* There is no point in reading a TMC in HW FIFO mode */ + mode = readl_relaxed(drvdata->base + TMC_MODE); + if (mode != TMC_MODE_CIRCULAR_BUFFER) { + ret = -EINVAL; + goto out; + } __tmc_etb_disable_hw(drvdata); + }
drvdata->reading = true; out:
From: Aharon Landau aharonl@mellanox.com
[ Upstream commit 819f7427bafd494ef7ca4942ec6322db20722d7b ]
Missing INIT2INIT entry in the list of modify commands caused DEVX applications to be unable to modify_qp for this transition state. Add the MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes.
Fixes: e662e14d801b ("IB/mlx5: Add DEVX support for modify and query commands") Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.org Signed-off-by: Aharon Landau aharonl@mellanox.com Reviewed-by: Maor Gottlieb maorg@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx5/devx.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c index d609f4659afb..bba7ab078430 100644 --- a/drivers/infiniband/hw/mlx5/devx.c +++ b/drivers/infiniband/hw/mlx5/devx.c @@ -814,6 +814,7 @@ static bool devx_is_obj_modify_cmd(const void *in) case MLX5_CMD_OP_SET_L2_TABLE_ENTRY: case MLX5_CMD_OP_RST2INIT_QP: case MLX5_CMD_OP_INIT2RTR_QP: + case MLX5_CMD_OP_INIT2INIT_QP: case MLX5_CMD_OP_RTR2RTS_QP: case MLX5_CMD_OP_RTS2RTS_QP: case MLX5_CMD_OP_SQERR2RTS_QP:
From: Luo Jiaxing luojiaxing@huawei.com
[ Upstream commit e16b9ed61e078d836a0f24a82080cf29d7539c7e ]
We found out that after phy up, the hardware reports another oob interrupt but did not follow a phy up interrupt:
oob ready -> phy up -> DEV found -> oob read -> wait phy up -> timeout
We run link reset when wait phy up timeout, and it send a normal disk into reset processing. So we made some circumvention action in the code, so that this abnormal oob interrupt will not start the timer to wait for phy up.
Link: https://lore.kernel.org/r/1589552025-165012-2-git-send-email-john.garry@huaw... Signed-off-by: Luo Jiaxing luojiaxing@huawei.com Signed-off-by: John Garry john.garry@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/hisi_sas/hisi_sas_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index 6f4692f0d714..031aa4043c5e 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -904,8 +904,11 @@ void hisi_sas_phy_oob_ready(struct hisi_hba *hisi_hba, int phy_no) struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; struct device *dev = hisi_hba->dev;
+ dev_dbg(dev, "phy%d OOB ready\n", phy_no); + if (phy->phy_attached) + return; + if (!timer_pending(&phy->timer)) { - dev_dbg(dev, "phy%d OOB ready\n", phy_no); phy->timer.expires = jiffies + HISI_SAS_WAIT_PHYUP_TIMEOUT * HZ; add_timer(&phy->timer); }
From: Jon Derrick jonathan.derrick@intel.com
[ Upstream commit c88d19181771bd189147681ef38fc1533ebeff4c ]
This patch fixes two bit conflicts in the pci-bridge-emul driver:
1. Bit 3 of Device Status (19 of Device Control) is marked as both Write-1-to-Clear and Read-Only. It should be Write-1-to-Clear. The Read-Only and Reserved bitmasks are shifted by 1 bit due to this error.
2. Bit 12 of Slot Control is marked as both Read-Write and Reserved. It should be Read-Write.
Link: https://lore.kernel.org/r/20200511162117.6674-2-jonathan.derrick@intel.com Signed-off-by: Jon Derrick jonathan.derrick@intel.com Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Acked-by: Rob Herring robh@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci-bridge-emul.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c index 5fd90105510d..d3b6b9a05618 100644 --- a/drivers/pci/pci-bridge-emul.c +++ b/drivers/pci/pci-bridge-emul.c @@ -195,8 +195,8 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = { * RO, the rest is reserved */ .w1c = GENMASK(19, 16), - .ro = GENMASK(20, 19), - .rsvd = GENMASK(31, 21), + .ro = GENMASK(21, 20), + .rsvd = GENMASK(31, 22), },
[PCI_EXP_LNKCAP / 4] = { @@ -236,7 +236,7 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = { PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16, .ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS | PCI_EXP_SLTSTA_EIS) << 16, - .rsvd = GENMASK(15, 12) | (GENMASK(15, 9) << 16), + .rsvd = GENMASK(15, 13) | (GENMASK(15, 9) << 16), },
[PCI_EXP_RTCTL / 4] = {
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit c3f4ec050f56eeab7c1f290321f9b762c95bd332 ]
If 'ioremap' fails, we must free 'bridge', as done in other error handling path bellow.
Fixes: 19cc4c843f40 ("m68k/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Reviewed-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Greg Ungerer gerg@linux-m68k.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/m68k/coldfire/pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c index 62b0eb6cf69a..84eab0f5e00a 100644 --- a/arch/m68k/coldfire/pci.c +++ b/arch/m68k/coldfire/pci.c @@ -216,8 +216,10 @@ static int __init mcf_pci_init(void)
/* Keep a virtual mapping to IO/config space active */ iospace = (unsigned long) ioremap(PCI_IO_PA, PCI_IO_SIZE); - if (iospace == 0) + if (iospace == 0) { + pci_free_host_bridge(bridge); return -ENODEV; + } pr_info("Coldfire: PCI IO/config window mapped to 0x%x\n", (u32) iospace);
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit 494a94e38dcf62543a32a4424d646ff80b4b28bd ]
Add missed acpi_gpiochip_free_interrupts() call when unregistering ports.
While at it, drop extra check to call acpi_gpiochip_request_interrupts(). There is no need to have an additional check to call acpi_gpiochip_request_interrupts(). Even without any interrupts available the registered ACPI Event handlers can be useful for debugging purposes.
Fixes: e6cb3486f5a1 ("gpio: dwapb: add gpio-signaled acpi event support") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Tested-by: Serge Semin fancer.lancer@gmail.com Acked-by: Serge Semin fancer.lancer@gmail.com Link: https://lore.kernel.org/r/20200519131233.59032-1-andriy.shevchenko@linux.int... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-dwapb.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index 92e127e74813..02cf4c43a4c4 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -533,26 +533,33 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio, dwapb_configure_irqs(gpio, port, pp);
err = gpiochip_add_data(&port->gc, port); - if (err) + if (err) { dev_err(gpio->dev, "failed to register gpiochip for port%d\n", port->idx); - else - port->is_registered = true; + return err; + }
/* Add GPIO-signaled ACPI event support */ - if (pp->has_irq) - acpi_gpiochip_request_interrupts(&port->gc); + acpi_gpiochip_request_interrupts(&port->gc);
- return err; + port->is_registered = true; + + return 0; }
static void dwapb_gpio_unregister(struct dwapb_gpio *gpio) { unsigned int m;
- for (m = 0; m < gpio->nr_ports; ++m) - if (gpio->ports[m].is_registered) - gpiochip_remove(&gpio->ports[m].gc); + for (m = 0; m < gpio->nr_ports; ++m) { + struct dwapb_gpio_port *port = &gpio->ports[m]; + + if (!port->is_registered) + continue; + + acpi_gpiochip_free_interrupts(&port->gc); + gpiochip_remove(&port->gc); + } }
static struct dwapb_platform_data *
From: Peter Chen peter.chen@nxp.com
[ Upstream commit 3c73bc52195def14165c3a7d91bdbb33b51725f5 ]
The threaded interrupt handler may still be called after the usb_gadget_disconnect is called, it causes the structures used at interrupt handler was freed before it uses, eg the usb_request. This issue usually occurs we remove the udc function during the transfer. Below is the example when doing stress test for android switch function, the EP0's request is freed by .unbind (configfs_composite_unbind -> composite_dev_cleanup), but the threaded handler accesses this request during handling setup packet request.
In fact, there is no protection between unbind the udc and udc interrupt handling, so we have to avoid the interrupt handler is occurred or scheduled during the .unbind flow.
init: Sending signal 9 to service 'adbd' (pid 18077) process group... android_work: did not send uevent (0 0 000000007bec2039) libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 6ms init: Service 'adbd' (pid 18077) received signal 9 init: Sending signal 9 to service 'adbd' (pid 18077) process group... libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 0ms init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:14) init: Received control message 'start' for 'adbd' from pid: 399 (/vendor/bin/hw/android.hardware.usb@1.
init: starting service 'adbd'... read descriptors read strings Unable to handle kernel read from unreadable memory at virtual address 000000000000002a android_work: sent uevent USB_STATE=CONNECTED Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e97f1000 using random self ethernet address [000000000000002a] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 232 Comm: irq/68-5b110000 Not tainted 5.4.24-06075-g94a6b52b5815 #92 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 00400085 (nzcv daIf +PAN -UAO) using random host ethernet address pc : composite_setup+0x5c/0x1730 lr : android_setup+0xc0/0x148 sp : ffff80001349bba0 x29: ffff80001349bba0 x28: ffff00083a50da00 x27: ffff8000124e6000 x26: ffff800010177950 x25: 0000000000000040 x24: ffff000834e18010 x23: 0000000000000000 x22: 0000000000000000 x21: ffff00083a50da00 x20: ffff00082e75ec40 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001 x11: ffff80001180fb58 x10: 0000000000000040 x9 : ffff8000120fc980 x8 : 0000000000000000 x7 : ffff00083f98df50 x6 : 0000000000000100 x5 : 00000307e8978431 x4 : ffff800011386788 x3 : 0000000000000000 x2 : ffff800012342000 x1 : 0000000000000000 x0 : ffff800010c6d3a0 Call trace: composite_setup+0x5c/0x1730 android_setup+0xc0/0x148 cdns3_ep0_delegate_req+0x64/0x90 cdns3_check_ep0_interrupt_proceed+0x384/0x738 cdns3_device_thread_irq_handler+0x124/0x6e0 cdns3_thread_irq+0x94/0xa0 irq_thread_fn+0x30/0xa0 irq_thread+0x150/0x248 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: 910e8000 f9400693 12001ed7 79400f79 (3940aa61) ---[ end trace c685db37f8773fba ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,20002008 Memory Limit: none Rebooting in 5 seconds..
Reviewed-by: Jun Li jun.li@nxp.com Signed-off-by: Peter Chen peter.chen@nxp.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/core.c | 2 ++ include/linux/usb/gadget.h | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 51fa614b4079..0e7820158aaa 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1297,6 +1297,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
usb_gadget_disconnect(udc->gadget); + if (udc->gadget->irq) + synchronize_irq(udc->gadget->irq); udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 124462d65eac..67f5adc9b875 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -373,6 +373,7 @@ struct usb_gadget_ops { * @connected: True if gadget is connected. * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag * indicates that it supports LPM as per the LPM ECN & errata. + * @irq: the interrupt number for device controller. * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget @@ -427,6 +428,7 @@ struct usb_gadget { unsigned deactivated:1; unsigned connected:1; unsigned lpm_capable:1; + int irq; }; #define work_to_gadget(w) (container_of((w), struct usb_gadget, work))
From: Christophe Leroy christophe.leroy@csgroup.eu
[ Upstream commit 3af4786eb429b2df76cbd7ce3bae21467ac3e4fb ]
For platforms using shared.c (4xx, Book3e, Book3s/32), also handle the _PAGE_COHERENT flag which corresponds to the M bit of the WIMG flags.
Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu [mpe: Make it more verbose, use "coherent" rather than "m"] Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/324c3d860717e8e91fca3bb6c0f8b23e1644a404.158986698... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/mm/ptdump/shared.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/arch/powerpc/mm/ptdump/shared.c b/arch/powerpc/mm/ptdump/shared.c index f7ed2f187cb0..784f8df17f73 100644 --- a/arch/powerpc/mm/ptdump/shared.c +++ b/arch/powerpc/mm/ptdump/shared.c @@ -30,6 +30,11 @@ static const struct flag_info flag_array[] = { .val = _PAGE_PRESENT, .set = "present", .clear = " ", + }, { + .mask = _PAGE_COHERENT, + .val = _PAGE_COHERENT, + .set = "coherent", + .clear = " ", }, { .mask = _PAGE_GUARDED, .val = _PAGE_GUARDED,
From: Marek Szyprowski m.szyprowski@samsung.com
[ Upstream commit d4f9b5428b53dd67f49ee8deed8d4366ed6b1933 ]
WM8994 chip has built-in regulators, which might be used for chip operation. They are controlled by a separate wm8994-regulator driver, which should be loaded before this driver calls regulator_get(), because that driver also provides consumer-supply mapping for the them. If that driver is not yet loaded, regulator core substitute them with dummy regulator, what breaks chip operation, because the built-in regulators are never enabled. Fix this by annotating this driver with MODULE_SOFTDEP() "pre" dependency to "wm8994_regulator" module.
Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/wm8994-core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 1e9fe7d92597..737dede4a95c 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -690,3 +690,4 @@ module_i2c_driver(wm8994_i2c_driver); MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mark Brown broonie@opensource.wolfsonmicro.com"); +MODULE_SOFTDEP("pre: wm8994_regulator");
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit b6170a49c59c27a10efed26c5a2969403e69aaba ]
There wasn't any clean up done if cxgb3_alloc_atid() failed and also the original code didn't release "csk->l2t".
Link: https://lore.kernel.org/r/20200521121221.GA247492@mwanda Fixes: 6f7efaabefeb ("[SCSI] cxgb3i: change cxgb3i to use libcxgbi") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c index 524cdbcd29aa..ec7d01f6e2d5 100644 --- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c +++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c @@ -959,6 +959,7 @@ static int init_act_open(struct cxgbi_sock *csk) struct net_device *ndev = cdev->ports[csk->port_id]; struct cxgbi_hba *chba = cdev->hbas[csk->port_id]; struct sk_buff *skb = NULL; + int ret;
log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK, "csk 0x%p,%u,0x%lx.\n", csk, csk->state, csk->flags); @@ -979,16 +980,16 @@ static int init_act_open(struct cxgbi_sock *csk) csk->atid = cxgb3_alloc_atid(t3dev, &t3_client, csk); if (csk->atid < 0) { pr_err("NO atid available.\n"); - return -EINVAL; + ret = -EINVAL; + goto put_sock; } cxgbi_sock_set_flag(csk, CTPF_HAS_ATID); cxgbi_sock_get(csk);
skb = alloc_wr(sizeof(struct cpl_act_open_req), 0, GFP_KERNEL); if (!skb) { - cxgb3_free_atid(t3dev, csk->atid); - cxgbi_sock_put(csk); - return -ENOMEM; + ret = -ENOMEM; + goto free_atid; } skb->sk = (struct sock *)csk; set_arp_failure_handler(skb, act_open_arp_failure); @@ -1010,6 +1011,15 @@ static int init_act_open(struct cxgbi_sock *csk) cxgbi_sock_set_state(csk, CTP_ACTIVE_OPEN); send_act_open_req(csk, skb, csk->l2t); return 0; + +free_atid: + cxgb3_free_atid(t3dev, csk->atid); +put_sock: + cxgbi_sock_put(csk); + l2t_release(t3dev, csk->l2t); + csk->l2t = NULL; + + return ret; }
cxgb3_cpl_handler_func cxgb3i_cpl_handlers[NUM_CPL_CMDS] = {
From: Quanyang Wang quanyang.wang@windriver.com
[ Upstream commit 58b0fb86260063f86afecaebf4056c876fff2a19 ]
This is detected by kmemleak running on zcu102 board:
unreferenced object 0xffffffc877e48180 (size 128): comm "swapper/0", pid 1, jiffies 4294892909 (age 315.436s) hex dump (first 32 bytes): 64 70 5f 76 69 64 65 6f 5f 72 65 66 5f 64 69 76 dp_video_ref_div 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1............... backtrace: [<00000000c9be883b>] __kmalloc_track_caller+0x200/0x380 [<00000000f02c3809>] kvasprintf+0x7c/0x100 [<00000000e51dde4d>] kasprintf+0x60/0x80 [<0000000092298b05>] zynqmp_register_clocks+0x29c/0x398 [<00000000faaff182>] zynqmp_clock_probe+0x3cc/0x4c0 [<000000005f5986f0>] platform_drv_probe+0x58/0xa8 [<00000000d5810136>] really_probe+0xd8/0x2a8 [<00000000f5b671be>] driver_probe_device+0x5c/0x100 [<0000000038f91fcf>] __device_attach_driver+0x98/0xb8 [<000000008a3f2ac2>] bus_for_each_drv+0x74/0xd8 [<000000001cb2783d>] __device_attach+0xe0/0x140 [<00000000c268031b>] device_initial_probe+0x24/0x30 [<000000006998de4b>] bus_probe_device+0x9c/0xa8 [<00000000647ae6ff>] device_add+0x3c0/0x610 [<0000000071c14bb8>] of_device_add+0x40/0x50 [<000000004bb5d132>] of_platform_device_create_pdata+0xbc/0x138
This is because that when num_nodes is larger than 1, clk_out is allocated using kasprintf for these nodes but only the last node's clk_out is freed.
Signed-off-by: Quanyang Wang quanyang.wang@windriver.com Signed-off-by: Michal Simek michal.simek@xilinx.com Signed-off-by: Tejas Patel tejas.patel@xilinx.com Signed-off-by: Jolly Shah jolly.shah@xilinx.com Link: https://lkml.kernel.org/r/1583185843-20707-5-git-send-email-jolly.shah@xilin... Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/zynqmp/clkc.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/zynqmp/clkc.c b/drivers/clk/zynqmp/clkc.c index a11f93ecbf34..6f057ab9df03 100644 --- a/drivers/clk/zynqmp/clkc.c +++ b/drivers/clk/zynqmp/clkc.c @@ -558,7 +558,7 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name, { int j; u32 num_nodes, clk_dev_id; - char *clk_out = NULL; + char *clk_out[MAX_NODES]; struct clock_topology *nodes; struct clk_hw *hw = NULL;
@@ -572,16 +572,16 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name, * Intermediate clock names are postfixed with type of clock. */ if (j != (num_nodes - 1)) { - clk_out = kasprintf(GFP_KERNEL, "%s%s", clk_name, + clk_out[j] = kasprintf(GFP_KERNEL, "%s%s", clk_name, clk_type_postfix[nodes[j].type]); } else { - clk_out = kasprintf(GFP_KERNEL, "%s", clk_name); + clk_out[j] = kasprintf(GFP_KERNEL, "%s", clk_name); }
if (!clk_topology[nodes[j].type]) continue;
- hw = (*clk_topology[nodes[j].type])(clk_out, clk_dev_id, + hw = (*clk_topology[nodes[j].type])(clk_out[j], clk_dev_id, parent_names, num_parents, &nodes[j]); @@ -590,9 +590,12 @@ static struct clk_hw *zynqmp_register_clk_topology(int clk_id, char *clk_name, __func__, clk_dev_id, clk_name, PTR_ERR(hw));
- parent_names[0] = clk_out; + parent_names[0] = clk_out[j]; } - kfree(clk_out); + + for (j = 0; j < num_nodes; j++) + kfree(clk_out[j]); + return hw; }
From: Xiyu Yang xiyuyang19@fudan.edu.cn
[ Upstream commit 7217e6e694da3aae6d17db8a7f7460c8d4817ebf ]
In order to create or activate a new node, lpfc_els_unsol_buffer() invokes lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), all of them will return a reference of the specified lpfc_nodelist object to "ndlp" with increased refcnt.
When lpfc_els_unsol_buffer() returns, local variable "ndlp" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of lpfc_els_unsol_buffer(). When "ndlp" in DEV_LOSS, the function forgets to decrease the refcnt increased by lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), causing a refcnt leak.
Fix this issue by calling lpfc_nlp_put() when "ndlp" in DEV_LOSS.
Link: https://lore.kernel.org/r/1590416184-52592-1-git-send-email-xiyuyang19@fudan... Reviewed-by: Daniel Wagner dwagner@suse.de Reviewed-by: James Smart james.smart@broadcom.com Signed-off-by: Xiyu Yang xiyuyang19@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_els.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 66f8867dd837..94d8f2834100 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -8394,6 +8394,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, spin_lock_irq(shost->host_lock); if (ndlp->nlp_flag & NLP_IN_DEV_LOSS) { spin_unlock_irq(shost->host_lock); + if (newnode) + lpfc_nlp_put(ndlp); goto dropit; } spin_unlock_irq(shost->host_lock);
From: Sudhakar Panneerselvam sudhakar.panneerselvam@oracle.com
[ Upstream commit 5ae6a6a915033bfee79e76e0c374d4f927909edc ]
vhost-scsi pre-allocates the maximum sg entries per command and if a command requires more than VHOST_SCSI_PREALLOC_SGLS entries, then that command is failed by it. This patch lets vhost communicate the max sg limit when it registers vhost_scsi_ops with TCM. With this change, TCM would report the max sg entries through "Block Limits" VPD page which will be typically queried by the SCSI initiator during device discovery. By knowing this limit, the initiator could ensure the maximum transfer length is less than or equal to what is reported by vhost-scsi.
Link: https://lore.kernel.org/r/1590166317-953-1-git-send-email-sudhakar.panneerse... Cc: Michael S. Tsirkin mst@redhat.com Cc: Jason Wang jasowang@redhat.com Cc: Paolo Bonzini pbonzini@redhat.com Cc: Stefan Hajnoczi stefanha@redhat.com Reviewed-by: Mike Christie mchristi@redhat.com Signed-off-by: Sudhakar Panneerselvam sudhakar.panneerselvam@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/scsi.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index a9caf1bc3c3e..88ce114790d7 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -2290,6 +2290,7 @@ static struct configfs_attribute *vhost_scsi_wwn_attrs[] = { static const struct target_core_fabric_ops vhost_scsi_ops = { .module = THIS_MODULE, .fabric_name = "vhost", + .max_data_sg_nents = VHOST_SCSI_PREALLOC_SGLS, .tpg_get_wwn = vhost_scsi_get_fabric_wwn, .tpg_get_tag = vhost_scsi_get_tpgt, .tpg_check_demo_mode = vhost_scsi_check_true,
From: Alain Volmat avolmat@me.com
[ Upstream commit a403bbab1a73d798728d76931cab3ff0399b9560 ]
Fixes an issue leading to having all clocks following a critical clocks marked as well as criticals.
Fixes: fa6415affe20 ("clk: st: clk-flexgen: Detect critical clocks") Signed-off-by: Alain Volmat avolmat@me.com Link: https://lkml.kernel.org/r/20200322140740.3970-1-avolmat@me.com Reviewed-by: Patrice Chotard patrice.chotard@st.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/st/clk-flexgen.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c index 4413b6e04a8e..55873d4b7603 100644 --- a/drivers/clk/st/clk-flexgen.c +++ b/drivers/clk/st/clk-flexgen.c @@ -375,6 +375,7 @@ static void __init st_of_flexgen_setup(struct device_node *np) break; }
+ flex_flags &= ~CLK_IS_CRITICAL; of_clk_detect_critical(np, i, &flex_flags);
/*
From: Mark Zhang markz@mellanox.com
[ Upstream commit d246a3061528be6d852156d25c02ea69d6db7e65 ]
The commit citied in the Fixes line wasn't complete and solved only part of the problems. Update the mlx5_ib to properly support MLX5_CMD_OP_INIT2INIT_QP command in the DEVX, that is required when modify the QP tx_port_affinity.
Fixes: 819f7427bafd ("RDMA/mlx5: Add init2init as a modify command") Link: https://lore.kernel.org/r/20200527135703.482501-1-leon@kernel.org Signed-off-by: Mark Zhang markz@mellanox.com Reviewed-by: Maor Gottlieb maorg@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx5/devx.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c index bba7ab078430..fd75a9043bf1 100644 --- a/drivers/infiniband/hw/mlx5/devx.c +++ b/drivers/infiniband/hw/mlx5/devx.c @@ -489,6 +489,10 @@ static u64 devx_get_obj_id(const void *in) obj_id = get_enc_obj_id(MLX5_CMD_OP_CREATE_QP, MLX5_GET(rst2init_qp_in, in, qpn)); break; + case MLX5_CMD_OP_INIT2INIT_QP: + obj_id = get_enc_obj_id(MLX5_CMD_OP_CREATE_QP, + MLX5_GET(init2init_qp_in, in, qpn)); + break; case MLX5_CMD_OP_INIT2RTR_QP: obj_id = get_enc_obj_id(MLX5_CMD_OP_CREATE_QP, MLX5_GET(init2rtr_qp_in, in, qpn));
From: Kajol Jain kjain@linux.ibm.com
[ Upstream commit b4ac18eead28611ff470d0f47a35c4e0ac080d9c ]
Commit 2b206ee6b0df ("powerpc/perf/hv-24x7: Display change in counter values")' added to print _change_ in the counter value rather then raw value for 24x7 counters. Incase of transactions, the event count is set to 0 at the beginning of the transaction. It also sets the event's prev_count to the raw value at the time of initialization. Because of setting event count to 0, we are seeing some weird behaviour, whenever we run multiple 24x7 events at a time.
For example:
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/, hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}" -C 0 -I 1000 sleep 100
1.000121704 120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 1.000121704 5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 2.000357733 8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 2.000357733 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.000641884 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Getting these large values in case we do -I.
As we are setting event_count to 0, for interval case, overall event_count is not coming in incremental order. As we may can get new delta lesser then previous count. Because of which when we print intervals, we are getting negative value which create these large values.
This patch removes part where we set event_count to 0 in function 'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count to the raw value at the time of initialization to print change value.
With this patch In power9 platform
command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/, hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}" -C 0 -I 1000 sleep 100
1.000117685 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 1.000117685 1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 2.000349331 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 2.000349331 2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 3.000495900 131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 3.000495900 4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.000645920 204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 4.000645920 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.284169997 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Suggested-by: Sukadev Bhattiprolu sukadev@linux.vnet.ibm.com Signed-off-by: Kajol Jain kjain@linux.ibm.com Tested-by: Madhavan Srinivasan maddy@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200525104308.9814-2-kjain@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/perf/hv-24x7.c | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c index 573e0b309c0c..48e8f4b17b91 100644 --- a/arch/powerpc/perf/hv-24x7.c +++ b/arch/powerpc/perf/hv-24x7.c @@ -1400,16 +1400,6 @@ static void h_24x7_event_read(struct perf_event *event) h24x7hw = &get_cpu_var(hv_24x7_hw); h24x7hw->events[i] = event; put_cpu_var(h24x7hw); - /* - * Clear the event count so we can compute the _change_ - * in the 24x7 raw counter value at the end of the txn. - * - * Note that we could alternatively read the 24x7 value - * now and save its value in event->hw.prev_count. But - * that would require issuing a hcall, which would then - * defeat the purpose of using the txn interface. - */ - local64_set(&event->count, 0); }
put_cpu_var(hv_24x7_reqb);
From: Xiyu Yang xiyuyang19@fudan.edu.cn
[ Upstream commit a4abc6b12eb1f7a533c2e7484cfa555454ff0977 ]
nfsd4_process_cb_update() invokes svc_xprt_get(), which increases the refcount of the "c->cn_xprt".
The reference counting issue happens in one exception handling path of nfsd4_process_cb_update(). When setup callback client failed, the function forgets to decrease the refcnt increased by svc_xprt_get(), causing a refcnt leak.
Fix this issue by calling svc_xprt_put() when setup callback client failed.
Signed-off-by: Xiyu Yang xiyuyang19@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Signed-off-by: J. Bruce Fields bfields@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfsd/nfs4callback.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index afca3287184b..efe55d101b0e 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -1230,6 +1230,8 @@ static void nfsd4_process_cb_update(struct nfsd4_callback *cb) err = setup_callback_client(clp, &conn, ses); if (err) { nfsd4_mark_cb_down(clp, err); + if (c) + svc_xprt_put(c->cn_xprt); return; } }
From: Jon Derrick jonathan.derrick@intel.com
[ Upstream commit 3e5095eebe015d5a4d566aa5e03c8621add5f0a7 ]
Versions of VMD with the Host Physical Address shadow register use this register to calculate the bus address offset needed to do guest passthrough of the domain. This register shadows the Host Physical Address registers including the resource type bits. After calculating the offset, the extra resource type bits lead to the VMD resources being over-provisioned at the front and under-provisioned at the back.
Example: pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit]
Expected: pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit]
If other devices are mapped in the over-provisioned front, it could lead to resource conflict issues with VMD or those devices.
Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com Fixes: a1a30170138c9 ("PCI: vmd: Fix shadow offsets to reflect spec changes") Signed-off-by: Jon Derrick jonathan.derrick@intel.com Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/vmd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index a35d3f3996d7..0310fe367e01 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -593,9 +593,11 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) if (!membar2) return -ENOMEM; offset[0] = vmd->dev->resource[VMD_MEMBAR1].start - - readq(membar2 + MB2_SHADOW_OFFSET); + (readq(membar2 + MB2_SHADOW_OFFSET) & + PCI_BASE_ADDRESS_MEM_MASK); offset[1] = vmd->dev->resource[VMD_MEMBAR2].start - - readq(membar2 + MB2_SHADOW_OFFSET + 8); + (readq(membar2 + MB2_SHADOW_OFFSET + 8) & + PCI_BASE_ADDRESS_MEM_MASK); pci_iounmap(vmd->dev, membar2); } }
From: Qiushi Wu wu000273@umn.edu
[ Upstream commit 0b8e125e213204508e1b3c4bdfe69713280b7abd ]
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") fixed a similar problem.
Link: https://lore.kernel.org/r/20200528030231.9082-1-wu000273@umn.edu Signed-off-by: Qiushi Wu wu000273@umn.edu Reviewed-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/sysfs.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 7a50cedcef1f..091cca9d88ed 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -1060,8 +1060,7 @@ static int add_port(struct ib_core_device *coredev, int port_num) coredev->ports_kobj, "%d", port_num); if (ret) { - kfree(p); - return ret; + goto err_put; }
p->gid_attr_group = kzalloc(sizeof(*p->gid_attr_group), GFP_KERNEL); @@ -1074,8 +1073,7 @@ static int add_port(struct ib_core_device *coredev, int port_num) ret = kobject_init_and_add(&p->gid_attr_group->kobj, &gid_attr_type, &p->kobj, "gid_attrs"); if (ret) { - kfree(p->gid_attr_group); - goto err_put; + goto err_put_gid_attrs; }
if (device->ops.process_mad && is_full_dev) { @@ -1406,8 +1404,10 @@ int ib_port_register_module_stat(struct ib_device *device, u8 port_num,
ret = kobject_init_and_add(kobj, ktype, &port->kobj, "%s", name); - if (ret) + if (ret) { + kobject_put(kobj); return ret; + } }
return 0;
From: Paulo Alcantara pc@cjr.nz
[ Upstream commit aaa3aef34d3ab9499a5c7633823429f7a24e6dff ]
If we mount a very specific DFS link
\FS0.FOO.COM\dfs\link -> \FS0\share1, \FS1\share2
where its target list contains NB names ("FS0" & "FS1") rather than FQDN ones ("FS0.FOO.COM" & "FS1.FOO.COM"), we end up connecting to \FOO\share1 but server->hostname will have "FOO.COM". The reason is because both "FS0" and "FS0.FOO.COM" resolve to same IP address and they share same TCP server connection, but "FS0.FOO.COM" was the first hostname set -- which is OK.
However, if the echo thread timeouts and we still have a good connection to "FS0", in cifs_reconnect()
rc = generic_ip_connect(server) -> success if (rc) { ... reconn_inval_dfs_target(server, cifs_sb, &tgt_list, &tgt_it); ... } ...
it successfully reconnects to "FS0" server but does not set up next DFS target - which should be the same target server "\FS0\share1" - and server->hostname remains set to "FS0.FOO.COM" rather than "FS0", as reconn_inval_dfs_target() would have it set to "FS0" if called earlier.
Finally, in __smb2_reconnect(), the reconnect of tcons would fail because tcon->ses->server->hostname (FS0.FOO.COM) does not match DFS target's hostname (FS0).
Fix that by calling reconn_inval_dfs_target() before generic_ip_connect() so server->hostname will get updated correctly prior to reconnecting its tcons in __smb2_reconnect().
With "cifs: handle hostnames that resolve to same ip in failover" patch
- The above problem would not occur. - We could save an DNS query to find out that they both resolve to the same ip address.
Signed-off-by: Paulo Alcantara (SUSE) pc@cjr.nz Reviewed-by: Aurelien Aptel aaptel@suse.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/connect.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 721b2560caa7..947c4aad5d6a 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -614,26 +614,26 @@ cifs_reconnect(struct TCP_Server_Info *server) try_to_freeze();
mutex_lock(&server->srv_mutex); +#ifdef CONFIG_CIFS_DFS_UPCALL /* * Set up next DFS target server (if any) for reconnect. If DFS * feature is disabled, then we will retry last server we * connected to before. */ + reconn_inval_dfs_target(server, cifs_sb, &tgt_list, &tgt_it); +#endif + rc = reconn_set_ipaddr(server); + if (rc) { + cifs_dbg(FYI, "%s: failed to resolve hostname: %d\n", + __func__, rc); + } + if (cifs_rdma_enabled(server)) rc = smbd_reconnect(server); else rc = generic_ip_connect(server); if (rc) { cifs_dbg(FYI, "reconnect error %d\n", rc); -#ifdef CONFIG_CIFS_DFS_UPCALL - reconn_inval_dfs_target(server, cifs_sb, &tgt_list, - &tgt_it); -#endif - rc = reconn_set_ipaddr(server); - if (rc) { - cifs_dbg(FYI, "%s: failed to resolve hostname: %d\n", - __func__, rc); - } mutex_unlock(&server->srv_mutex); msleep(3000); } else {
From: John Stultz john.stultz@linaro.org
[ Upstream commit a6b675a89e51a1cdad0481b809b7840d3f86e4b5 ]
Fixes the following kCFI crash seen on db845c, caused by the function prototypes not matching the callback function prototype.
[ 82.585661] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000001 [ 82.595387] Mem abort info: [ 82.599463] ESR = 0x96000005 [ 82.602658] EC = 0x25: DABT (current EL), IL = 32 bits [ 82.608177] SET = 0, FnV = 0 [ 82.611829] EA = 0, S1PTW = 0 [ 82.615369] Data abort info: [ 82.618751] ISV = 0, ISS = 0x00000005 [ 82.622641] CM = 0, WnR = 0 [ 82.625774] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000174259000 [ 82.632292] [0000000000000001] pgd=0000000000000000, pud=0000000000000000 [ 82.639167] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 82.644795] Modules linked in: hci_uart btqca xhci_plat_hcd xhci_pci_renesas xhci_pci xhci_hcd wcn36xx wcnss_ctrl wcd934x vctrl_regulator ufs_qcom syscon_reboot_e [ 82.644927] qcom_apcs_ipc_mailbox q6asm_dai q6routing q6asm q6afe_dai q6adm q6afe q6core q6dsp_common pm8941_pwrkey pm8916_wdt platform_mhu pinctrl_spmi_mpp pine [ 82.812982] CPU: 3 PID: 240 Comm: kworker/u16:4 Tainted: G W 5.6.0-rc7-mainline-00960-g0c34353d11b9-dirty #1 [ 82.824201] Hardware name: Thundercomm Dragonboard 845c (DT) [ 82.829937] Workqueue: qcom_apr_rx apr_rxwq [apr] [ 82.834698] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 82.839553] pc : __cfi_check_fail+0x4/0x1c [q6asm_dai] [ 82.844754] lr : __cfi_check+0x3a8/0x3b0 [q6asm_dai] [ 82.849767] sp : ffffffc0105f3c20 [ 82.853123] x29: ffffffc0105f3c30 x28: 0000000000000020 [ 82.858489] x27: ffffff80f4588400 x26: ffffff80f458ec94 [ 82.863854] x25: ffffff80f458ece8 x24: ffffffe3670c7000 [ 82.869220] x23: ffffff8094bb7b34 x22: ffffffe367137000 [ 82.874585] x21: bd07909b332eada6 x20: 0000000000000001 [ 82.879950] x19: ffffffe36713863c x18: ffffff80f8df4430 [ 82.885316] x17: 0000000000000001 x16: ffffffe39d15e660 [ 82.890681] x15: 0000000000000001 x14: 0000000000000027 [ 82.896047] x13: 0000000000000000 x12: ffffffe39e6465a0 [ 82.901413] x11: 0000000000000051 x10: 000000000000ffff [ 82.906779] x9 : 000ffffffe366c19 x8 : c3c5f18762d1ceef [ 82.912145] x7 : 0000000000000000 x6 : ffffffc010877698 [ 82.917511] x5 : ffffffc0105f3c00 x4 : 0000000000000000 [ 82.922877] x3 : 0000000000000000 x2 : 0000000000000001 [ 82.928243] x1 : ffffffe36713863c x0 : 0000000000000001 [ 82.933610] Call trace: [ 82.936099] __cfi_check_fail+0x4/0x1c [q6asm_dai] [ 82.940955] q6asm_srvc_callback+0x22c/0x618 [q6asm] [ 82.945973] apr_rxwq+0x1a8/0x27c [apr] [ 82.949861] process_one_work+0x2e8/0x54c [ 82.953919] worker_thread+0x27c/0x4d4 [ 82.957715] kthread+0x144/0x154 [ 82.960985] ret_from_fork+0x10/0x18 [ 82.964603] Code: a8c37bfd f85f8e5e d65f03c0 b40000a0 (39400008) [ 82.970762] ---[ end trace 410accb839617143 ]--- [ 82.975429] Kernel panic - not syncing: Fatal exception
Signed-off-by: John Stultz john.stultz@linaro.org Reviewed-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Cc: Patrick Lai plai@codeaurora.org Cc: Banajit Goswami bgoswami@codeaurora.org Cc: Liam Girdwood lgirdwood@gmail.com Cc: Mark Brown broonie@kernel.org Cc: Jaroslav Kysela perex@perex.cz Cc: Takashi Iwai tiwai@suse.com Cc: Srinivas Kandagatla srinivas.kandagatla@linaro.org Cc: Vinod Koul vkoul@kernel.org Cc: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Cc: Stephan Gerhold stephan@gerhold.net Cc: Sami Tolvanen samitolvanen@google.com Cc: Todd Kjos tkjos@google.com Cc: Alistair Delva adelva@google.com Cc: Amit Pundir amit.pundir@linaro.org Cc: Sumit Semwal sumit.semwal@linaro.org Cc: alsa-devel@alsa-project.org Link: https://lore.kernel.org/r/20200529213823.98812-1-john.stultz@linaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/qcom/qdsp6/q6asm-dai.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 548eb4fa2da6..9f0ffdcef637 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -171,7 +171,7 @@ static const struct snd_compr_codec_caps q6asm_compr_caps = { };
static void event_handler(uint32_t opcode, uint32_t token, - uint32_t *payload, void *priv) + void *payload, void *priv) { struct q6asm_dai_rtd *prtd = priv; struct snd_pcm_substream *substream = prtd->substream; @@ -494,7 +494,7 @@ static struct snd_pcm_ops q6asm_dai_ops = { };
static void compress_event_handler(uint32_t opcode, uint32_t token, - uint32_t *payload, void *priv) + void *payload, void *priv) { struct q6asm_dai_rtd *prtd = priv; struct snd_compr_stream *substream = prtd->cstream;
From: Pingfan Liu kernelfans@gmail.com
[ Upstream commit be5470e0c285a68dc3afdea965032f5ddc8269d7 ]
'mem=" option is an easy way to put high pressure on memory during some test. Hence after applying the memory limit, instead of total mem, the actual usable memory should be considered when reserving mem for crashkernel. Otherwise the boot up may experience OOM issue.
E.g. it would reserve 4G prior to the change and 512M afterward, if passing crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G", and mem=5G on a 256G machine.
This issue is powerpc specific because it puts higher priority on fadump and kdump reservation than on "mem=". Referring the following code: if (fadump_reserve_mem() == 0) reserve_crashkernel(); ... /* Ensure that total memory size is page-aligned. */ limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE); memblock_enforce_memory_limit(limit);
While on other arches, the effect of "mem=" takes a higher priority and pass through memblock_phys_mem_size() before calling reserve_crashkernel().
Signed-off-by: Pingfan Liu kernelfans@gmail.com Reviewed-by: Hari Bathini hbathini@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/machine_kexec.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index c4ed328a7b96..7a1c11a7cba5 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -114,11 +114,12 @@ void machine_kexec(struct kimage *image)
void __init reserve_crashkernel(void) { - unsigned long long crash_size, crash_base; + unsigned long long crash_size, crash_base, total_mem_sz; int ret;
+ total_mem_sz = memory_limit ? memory_limit : memblock_phys_mem_size(); /* use common parsing */ - ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(), + ret = parse_crashkernel(boot_command_line, total_mem_sz, &crash_size, &crash_base); if (ret == 0 && crash_size > 0) { crashk_res.start = crash_base; @@ -177,6 +178,7 @@ void __init reserve_crashkernel(void) /* Crash kernel trumps memory limit */ if (memory_limit && memory_limit <= crashk_res.end) { memory_limit = crashk_res.end + 1; + total_mem_sz = memory_limit; printk("Adjusted memory limit for crashkernel, now 0x%llx\n", memory_limit); } @@ -185,7 +187,7 @@ void __init reserve_crashkernel(void) "for crashkernel (System RAM: %ldMB)\n", (unsigned long)(crash_size >> 20), (unsigned long)(crashk_res.start >> 20), - (unsigned long)(memblock_phys_mem_size() >> 20)); + (unsigned long)(total_mem_sz >> 20));
if (!memblock_is_region_memory(crashk_res.start, crash_size) || memblock_reserve(crashk_res.start, crash_size)) {
From: Navid Emamdoost navid.emamdoost@gmail.com
[ Upstream commit ca162ce98110b98e7d97b7157328d34dcfdd40a9 ]
Even in failed case of pm_runtime_get_sync(), the usage_count is incremented. In order to keep the usage_count with correct value call appropriate pm_runtime_put().
Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-img.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c index c9e57bd109fb..599a0f66a384 100644 --- a/drivers/pwm/pwm-img.c +++ b/drivers/pwm/pwm-img.c @@ -129,8 +129,10 @@ static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, duty = DIV_ROUND_UP(timebase * duty_ns, period_ns);
ret = pm_runtime_get_sync(chip->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_autosuspend(chip->dev); return ret; + }
val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm)); @@ -331,8 +333,10 @@ static int img_pwm_remove(struct platform_device *pdev) int ret;
ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(&pdev->dev); return ret; + }
for (i = 0; i < pwm_chip->chip.npwm; i++) { val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
From: Will Deacon will@kernel.org
[ Upstream commit 454b0289c6b5f2c66164654b80212d15fbef7a03 ]
The pages backing page-table allocations for SRMMU are allocated via memblock as part of the "nocache" region initialisation during srmmu_paging_init() and should not be freed even if a later call to pgtable_pte_page_ctor() fails.
Remove the broken call to __free_page().
Cc: David S. Miller davem@davemloft.net Cc: Kirill A. Shutemov kirill@shutemov.name Fixes: 1ae9ae5f7df7 ("sparc: handle pgtable_page_ctor() fail") Signed-off-by: Will Deacon will@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/sparc/mm/srmmu.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index cc3ad64479ac..9e256d4d1f4c 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -379,7 +379,6 @@ pgtable_t pte_alloc_one(struct mm_struct *mm) return NULL; page = pfn_to_page(__nocache_pa(pte) >> PAGE_SHIFT); if (!pgtable_pte_page_ctor(page)) { - __free_page(page); return NULL; } return page;
From: Wang Hai wanghai38@huawei.com
[ Upstream commit 98749b7188affbf2900c2aab704a8853901d1139 ]
If register_netdev(dev) fails, free_netdev(dev) needs to be called, otherwise a memory leak will occur.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Wang Hai wanghai38@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/hamradio/yam.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c index 71cdef9fb56b..5ab53e9942f3 100644 --- a/drivers/net/hamradio/yam.c +++ b/drivers/net/hamradio/yam.c @@ -1133,6 +1133,7 @@ static int __init yam_init_driver(void) err = register_netdev(dev); if (err) { printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name); + free_netdev(dev); goto error; } yam_devs[i] = dev;
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit ca93c45755da98302c93abdd788fc09113baf9e0 ]
This commit fixes pingpong support for existing drivers that do not implement ntb_default_port_number() and ntb_default_peer_port_number(). This is required for hardware (like the crosslink topology of switchtec) which cannot assign reasonable port numbers to each port due to its perfect symmetry.
Instead of picking the doorbell to use based on the the index of the peer, we use the peer's port number. This is a bit clearer and easier to understand.
Fixes: c7aeb0afdcc2 ("NTB: ntb_pp: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe logang@deltatee.com Acked-by: Allen Hubbe allenbh@gmail.com Tested-by: Alexander Fomichev fomichev.ru@gmail.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/test/ntb_pingpong.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/ntb/test/ntb_pingpong.c b/drivers/ntb/test/ntb_pingpong.c index 65865e460ab8..18d00eec7b02 100644 --- a/drivers/ntb/test/ntb_pingpong.c +++ b/drivers/ntb/test/ntb_pingpong.c @@ -121,15 +121,14 @@ static int pp_find_next_peer(struct pp_ctx *pp) link = ntb_link_is_up(pp->ntb, NULL, NULL);
/* Find next available peer */ - if (link & pp->nmask) { + if (link & pp->nmask) pidx = __ffs64(link & pp->nmask); - out_db = BIT_ULL(pidx + 1); - } else if (link & pp->pmask) { + else if (link & pp->pmask) pidx = __ffs64(link & pp->pmask); - out_db = BIT_ULL(pidx); - } else { + else return -ENODEV; - } + + out_db = BIT_ULL(ntb_peer_port_number(pp->ntb, pidx));
spin_lock(&pp->lock); pp->out_pidx = pidx; @@ -303,7 +302,7 @@ static void pp_init_flds(struct pp_ctx *pp) break; }
- pp->in_db = BIT_ULL(pidx); + pp->in_db = BIT_ULL(lport); pp->pmask = GENMASK_ULL(pidx, 0) >> 1; pp->nmask = GENMASK_ULL(pcnt - 1, pidx);
@@ -435,4 +434,3 @@ static void __exit pp_exit(void) debugfs_remove_recursive(pp_dbgfs_topdir); } module_exit(pp_exit); -
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit fc8b086d9dbd57458d136c4fa70ee26f832c3a2e ]
When the commit adding ntb_default_port_number() and ntb_default_peer_port_number() entered the kernel there was no users of it so it was impossible to tell what the API needed.
When a user finally landed a year later (ntb_pingpong) there were more NTB topologies were created and no consideration was considered to how other drivers had changed.
Now that there is a user it can be fixed to provide a sensible default for the legacy drivers that do not implement ntb_{peer_}port_number(). Seeing ntb_pingpong doesn't check error codes returning EINVAL was also not sensible.
Patches for ntb_pingpong and ntb_perf follow (which are broken otherwise) to support hardware that doesn't have port numbers. This is important not only to not break support with existing drivers but for the cross link topology which, due to its perfect symmetry, cannot assign unique port numbers to each side.
Fixes: 1e5301196a88 ("NTB: Add indexed ports NTB API") Signed-off-by: Logan Gunthorpe logang@deltatee.com Acked-by: Allen Hubbe allenbh@gmail.com Tested-by: Alexander Fomichev fomichev.ru@gmail.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/core.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/ntb/core.c b/drivers/ntb/core.c index 2581ab724c34..c9a0912b175f 100644 --- a/drivers/ntb/core.c +++ b/drivers/ntb/core.c @@ -214,10 +214,8 @@ int ntb_default_port_number(struct ntb_dev *ntb) case NTB_TOPO_B2B_DSD: return NTB_PORT_SEC_DSD; default: - break; + return 0; } - - return -EINVAL; } EXPORT_SYMBOL(ntb_default_port_number);
@@ -240,10 +238,8 @@ int ntb_default_peer_port_number(struct ntb_dev *ntb, int pidx) case NTB_TOPO_B2B_DSD: return NTB_PORT_PRI_USD; default: - break; + return 0; } - - return -EINVAL; } EXPORT_SYMBOL(ntb_default_peer_port_number);
From: ashimida ashimida@linux.alibaba.com
[ Upstream commit 72d24accf02add25e08733f0ecc93cf10fcbd88c ]
When System.map was generated, the kernel used mksysmap to filter the kernel symbols, but all the symbols with the second letter 'L' in the kernel were filtered out, not just the symbols starting with 'dot + L'.
For example: ashimida@ubuntu:~/linux$ cat System.map |grep ' .L' ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L' ffff0000088028e0 t bLength_show ...... ffff0000092e0408 b PLLP_OUTC_lock ffff0000092e0410 b PLLP_OUTA_lock
The original intent should be to filter out all local symbols starting with '.L', so the dot should be escaped.
Fixes: 00902e984732 ("mksysmap: Add h8300 local symbol pattern") Signed-off-by: ashimida ashimida@linux.alibaba.com Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/mksysmap | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/mksysmap b/scripts/mksysmap index a35acc0d0b82..9aa23d15862a 100755 --- a/scripts/mksysmap +++ b/scripts/mksysmap @@ -41,4 +41,4 @@ # so we just ignore them to let readprofile continue to work. # (At least sparc64 has __crc_ in the middle).
-$NM -n $1 | grep -v '( [aNUw] )|(__crc_)|( $[adt])|( .L)' > $2 +$NM -n $1 | grep -v '( [aNUw] )|(__crc_)|( $[adt])|( .L)' > $2
From: John Johansen john.johansen@canonical.com
[ Upstream commit dd2569fbb053719f7df7ef8fdbb45cf47156a701 ]
Fix two issues with introspecting the task mode.
1. If a task is attached to a unconfined profile that is not the ns->unconfined profile then. Mode the mode is always reported as -
$ ps -Z LABEL PID TTY TIME CMD unconfined 1287 pts/0 00:00:01 bash test (-) 1892 pts/0 00:00:00 ps
instead of the correct value of (unconfined) as shown below
$ ps -Z LABEL PID TTY TIME CMD unconfined 2483 pts/0 00:00:01 bash test (unconfined) 3591 pts/0 00:00:00 ps
2. if a task is confined by a stack of profiles that are unconfined the output of label mode is again the incorrect value of (-) like above, instead of (unconfined). This is because the visibile profile count increment is skipped by the special casing of unconfined.
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels") Signed-off-by: John Johansen john.johansen@canonical.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/apparmor/label.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/apparmor/label.c b/security/apparmor/label.c index 470693239e64..6c3acae701ef 100644 --- a/security/apparmor/label.c +++ b/security/apparmor/label.c @@ -1531,13 +1531,13 @@ static const char *label_modename(struct aa_ns *ns, struct aa_label *label,
label_for_each(i, label, profile) { if (aa_ns_visible(ns, profile->ns, flags & FLAG_VIEW_SUBNS)) { - if (profile->mode == APPARMOR_UNCONFINED) + count++; + if (profile == profile->ns->unconfined) /* special case unconfined so stacks with * unconfined don't report as mixed. ie. * profile_foo//&:ns1:unconfined (mixed) */ continue; - count++; if (mode == -1) mode = profile->mode; else if (mode != profile->mode)
From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit 4d3da2d8d91f66988a829a18a0ce59945e8ae4fb ]
While trying to use the lantiq_gswip driver on one of my boards I made a mistake when specifying the phy-mode (because the out-of-tree driver wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the following error is printed multiple times: Unsupported interface: 3
While it gives at least a hint at what may be wrong it is not very user friendly. Print the human readable phy-mode and also which port is configured incorrectly (this hardware supports ports 0..6) to improve the cases where someone made a mistake.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Acked-by: Hauke Mehrtens hauke@hauke-m.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/lantiq_gswip.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index a69c9b9878b7..636966e93517 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -1451,7 +1451,8 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port,
unsupported: bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); - dev_err(ds->dev, "Unsupported interface: %d\n", state->interface); + dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", + phy_modes(state->interface), port); return; }
From: Mauricio Faria de Oliveira mfo@canonical.com
[ Upstream commit 3b646abc5bc6c0df649daea4c2c976bd4d47e4c8 ]
Currently apparmor_sk_clone_security() does not check for existing label/peer in the 'new' struct sock; it just overwrites it, if any (with another reference to the label of the source sock.)
static void apparmor_sk_clone_security(const struct sock *sk, struct sock *newsk) { struct aa_sk_ctx *ctx = SK_CTX(sk); struct aa_sk_ctx *new = SK_CTX(newsk);
new->label = aa_get_label(ctx->label); new->peer = aa_get_label(ctx->peer); }
This might leak label references, which might overflow under load. Thus, check for and put labels, to prevent such errors.
Note this is similarly done on:
static int apparmor_socket_post_create(struct socket *sock, ...) ... if (sock->sk) { struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
aa_put_label(ctx->label); ctx->label = aa_get_label(label); } ...
Context: -------
The label reference count leak is observed if apparmor_sock_graft() is called previously: this sets the 'ctx->label' field by getting a reference to the current label (later overwritten, without put.)
static void apparmor_sock_graft(struct sock *sk, ...) { struct aa_sk_ctx *ctx = SK_CTX(sk);
if (!ctx->label) ctx->label = aa_get_current_label(); }
And that is the case on crypto/af_alg.c:af_alg_accept():
int af_alg_accept(struct sock *sk, struct socket *newsock, ...) ... struct sock *sk2; ... sk2 = sk_alloc(...); ... security_sock_graft(sk2, newsock); security_sk_clone(sk, sk2); ...
Apparently both calls are done on their own right, especially for other LSMs, being introduced in 2010/2014, before apparmor socket mediation in 2017 (see commits [1,2,3,4]).
So, it looks OK there! Let's fix the reference leak in apparmor.
Test-case: ---------
Exercise that code path enough to overflow label reference count.
$ cat aa-refcnt-af_alg.c #include <stdio.h> #include <string.h> #include <unistd.h> #include <sys/socket.h> #include <linux/if_alg.h>
int main() { int sockfd; struct sockaddr_alg sa;
/* Setup the crypto API socket */ sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0); if (sockfd < 0) { perror("socket"); return 1; }
memset(&sa, 0, sizeof(sa)); sa.salg_family = AF_ALG; strcpy((char *) sa.salg_type, "rng"); strcpy((char *) sa.salg_name, "stdrng");
if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) { perror("bind"); return 1; }
/* Accept a "connection" and close it; repeat. */ while (!close(accept(sockfd, NULL, 0)));
return 0; }
$ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c
$ ./aa-refcnt-af_alg <a few hours later>
[ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000 ... [ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70 ... [ 9928.514286] security_sk_clone+0x33/0x50 [ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg] [ 9928.516091] alg_accept+0x15/0x20 [af_alg] [ 9928.516682] SYSC_accept4+0xff/0x210 [ 9928.519609] SyS_accept+0x10/0x20 [ 9928.520190] do_syscall_64+0x73/0x130 [ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Note that other messages may be seen, not just overflow, depending on the value being incremented by kref_get(); on another run:
[ 7273.182666] refcount_t: saturated; leaking memory. ... [ 7273.185789] refcount_t: underflow; use-after-free.
Kprobes: -------
Using kprobe events to monitor sk -> sk_security -> label -> count (kref):
Original v5.7 (one reference leak every iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6
Patched v5.7 (zero reference leak per iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
Commits: -------
[1] commit 507cad355fc9 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets") [2] commit 4c63f83c2c2e ("crypto: af_alg - properly label AF_ALG socket") [3] commit 2acce6aa9f65 ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning) [4] commit 56974a6fcfef ("apparmor: add base infastructure for socket mediation")
Fixes: 56974a6fcfef ("apparmor: add base infastructure for socket mediation") Reported-by: Brian Moyles bmoyles@netflix.com Signed-off-by: Mauricio Faria de Oliveira mfo@canonical.com Signed-off-by: John Johansen john.johansen@canonical.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/apparmor/lsm.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c index ec3a928af829..e31965dc6dd1 100644 --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -791,7 +791,12 @@ static void apparmor_sk_clone_security(const struct sock *sk, struct aa_sk_ctx *ctx = SK_CTX(sk); struct aa_sk_ctx *new = SK_CTX(newsk);
+ if (new->label) + aa_put_label(new->label); new->label = aa_get_label(ctx->label); + + if (new->peer) + aa_put_label(new->peer); new->peer = aa_get_label(ctx->peer); }
From: Chao Yu yuchao0@huawei.com
[ Upstream commit 8626441f05dc45a2f4693ee6863d02456ce39e60 ]
If mountpoint is readonly, we should allow shutdowning filesystem successfully, this fixes issue found by generic/599 testcase of xfstest.
Signed-off-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/file.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index c3a9da79ac99..5d94abe467a4 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -2056,8 +2056,15 @@ static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg)
if (in != F2FS_GOING_DOWN_FULLSYNC) { ret = mnt_want_write_file(filp); - if (ret) + if (ret) { + if (ret == -EROFS) { + ret = 0; + f2fs_stop_checkpoint(sbi, false); + set_sbi_flag(sbi, SBI_IS_SHUTDOWN); + trace_f2fs_shutdown(sbi, in, ret); + } return ret; + } }
switch (in) {
From: "Pavel Machek (CIP)" pavel@denx.de
[ Upstream commit 3b8a299a58b2afce464ae11324b59dcf0f1d10a7 ]
free_irq() is missing in case of error, fix that.
Signed-off-by: Pavel Machek (CIP) pavel@denx.de Reviewed-by: Jerome Brunet jbrunet@baylibre.com
Link: https://lore.kernel.org/r/20200606153103.GA17905@amd Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/meson/axg-fifo.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c index d286dff3171d..898ef1d5608f 100644 --- a/sound/soc/meson/axg-fifo.c +++ b/sound/soc/meson/axg-fifo.c @@ -244,7 +244,7 @@ static int axg_fifo_pcm_open(struct snd_pcm_substream *ss) /* Enable pclk to access registers and clock the fifo ip */ ret = clk_prepare_enable(fifo->pclk); if (ret) - return ret; + goto free_irq;
/* Setup status2 so it reports the memory pointer */ regmap_update_bits(fifo->map, FIFO_CTRL1, @@ -264,8 +264,14 @@ static int axg_fifo_pcm_open(struct snd_pcm_substream *ss) /* Take memory arbitror out of reset */ ret = reset_control_deassert(fifo->arb); if (ret) - clk_disable_unprepare(fifo->pclk); + goto free_clk; + + return 0;
+free_clk: + clk_disable_unprepare(fifo->pclk); +free_irq: + free_irq(fifo->irq, ss); return ret; }
From: Jakub Sitnicki jakub@cloudflare.com
[ Upstream commit 33a7c831565c43a7ee2f38c7df4c4a40e1dfdfed ]
When sockhash gets destroyed while sockets are still linked to it, we will walk the bucket lists and delete the links. However, we are not freeing the list elements after processing them, leaking the memory.
The leak can be triggered by close()'ing a sockhash map when it still contains sockets, and observed with kmemleak:
unreferenced object 0xffff888116e86f00 (size 64): comm "race_sock_unlin", pid 223, jiffies 4294731063 (age 217.404s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 81 de e8 41 00 00 00 00 c0 69 2f 15 81 88 ff ff ...A.....i/..... backtrace: [<00000000dd089ebb>] sock_hash_update_common+0x4ca/0x760 [<00000000b8219bd5>] sock_hash_update_elem+0x1d2/0x200 [<000000005e2c23de>] __do_sys_bpf+0x2046/0x2990 [<00000000d0084618>] do_syscall_64+0xad/0x9a0 [<000000000d96f263>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fix it by freeing the list element when we're done with it.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Jakub Sitnicki jakub@cloudflare.com Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: John Fastabend john.fastabend@gmail.com Link: https://lore.kernel.org/bpf/20200607205229.2389672-2-jakub@cloudflare.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/sock_map.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/core/sock_map.c b/net/core/sock_map.c index 8291568b707f..ba65c608c228 100644 --- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -879,6 +879,7 @@ static void sock_hash_free(struct bpf_map *map) sock_map_unref(elem->sk, elem); rcu_read_unlock(); release_sock(elem->sk); + sock_hash_free_elem(htab, elem); } }
From: Simon Arlott simon@octiron.net
[ Upstream commit 6555781b3fdec5e94e6914511496144241df7dee ]
If the cdrom fails to be registered then the device minor should be deallocated.
Link: https://lore.kernel.org/r/072dac4b-8402-4de8-36bd-47e7588969cd@0882a8b5-c6c3... Signed-off-by: Simon Arlott simon@octiron.net Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/sr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 4664fdf75c0f..70a28f6fb1d0 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -750,7 +750,7 @@ static int sr_probe(struct device *dev) cd->cdi.disk = disk;
if (register_cdrom(&cd->cdi)) - goto fail_put; + goto fail_minor;
/* * Initialize block layer runtime PM stuffs before the @@ -768,6 +768,10 @@ static int sr_probe(struct device *dev)
return 0;
+fail_minor: + spin_lock(&sr_index_lock); + clear_bit(minor, sr_index_bits); + spin_unlock(&sr_index_lock); fail_put: put_disk(disk); fail_free:
From: Tyrel Datwyler tyreld@linux.ibm.com
[ Upstream commit 4919b33b63c8b69d8dcf2b867431d0e3b6dc6d28 ]
The adapter info MAD is used to send the client info and receive the host info as a response. A persistent buffer is used and as such the client info is overwritten after the response. During the course of a normal adapter reset the client info is refreshed in the buffer in preparation for sending the adapter info MAD.
However, in the special case of LPM where we reenable the CRQ instead of a full CRQ teardown and reset we fail to refresh the client info in the adapter info buffer. As a result, after Live Partition Migration (LPM) we erroneously report the host's info as our own.
[mkp: typos]
Link: https://lore.kernel.org/r/20200603203632.18426-1-tyreld@linux.ibm.com Signed-off-by: Tyrel Datwyler tyreld@linux.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ibmvscsi/ibmvscsi.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 59f0f1030c54..c5711c659b51 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -415,6 +415,8 @@ static int ibmvscsi_reenable_crq_queue(struct crq_queue *queue, int rc = 0; struct vio_dev *vdev = to_vio_dev(hostdata->dev);
+ set_adapter_info(hostdata); + /* Re-enable the CRQ */ do { if (rc)
From: John Johansen john.johansen@canonical.com
[ Upstream commit 3ed4aaa94fc07db3cd0c91be95e3e1b9782a2710 ]
The subset test is not taking into account the unconfined exception which will cause profile transitions in the stacked confinement case to fail when no_new_privs is applied.
This fixes a regression introduced in the fix for https://bugs.launchpad.net/bugs/1839037
BugLink: https://bugs.launchpad.net/bugs/1844186 Signed-off-by: John Johansen john.johansen@canonical.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/apparmor/domain.c | 9 +++++---- security/apparmor/include/label.h | 1 + security/apparmor/label.c | 33 +++++++++++++++++++++++++++++++ 3 files changed, 39 insertions(+), 4 deletions(-)
diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c index 5dedc0173b02..1a33f490e667 100644 --- a/security/apparmor/domain.c +++ b/security/apparmor/domain.c @@ -935,7 +935,8 @@ int apparmor_bprm_set_creds(struct linux_binprm *bprm) * aways results in a further reduction of permissions. */ if ((bprm->unsafe & LSM_UNSAFE_NO_NEW_PRIVS) && - !unconfined(label) && !aa_label_is_subset(new, ctx->nnp)) { + !unconfined(label) && + !aa_label_is_unconfined_subset(new, ctx->nnp)) { error = -EPERM; info = "no new privs"; goto audit; @@ -1213,7 +1214,7 @@ int aa_change_hat(const char *hats[], int count, u64 token, int flags) * reduce restrictions. */ if (task_no_new_privs(current) && !unconfined(label) && - !aa_label_is_subset(new, ctx->nnp)) { + !aa_label_is_unconfined_subset(new, ctx->nnp)) { /* not an apparmor denial per se, so don't log it */ AA_DEBUG("no_new_privs - change_hat denied"); error = -EPERM; @@ -1234,7 +1235,7 @@ int aa_change_hat(const char *hats[], int count, u64 token, int flags) * reduce restrictions. */ if (task_no_new_privs(current) && !unconfined(label) && - !aa_label_is_subset(previous, ctx->nnp)) { + !aa_label_is_unconfined_subset(previous, ctx->nnp)) { /* not an apparmor denial per se, so don't log it */ AA_DEBUG("no_new_privs - change_hat denied"); error = -EPERM; @@ -1429,7 +1430,7 @@ int aa_change_profile(const char *fqname, int flags) * reduce restrictions. */ if (task_no_new_privs(current) && !unconfined(label) && - !aa_label_is_subset(new, ctx->nnp)) { + !aa_label_is_unconfined_subset(new, ctx->nnp)) { /* not an apparmor denial per se, so don't log it */ AA_DEBUG("no_new_privs - change_hat denied"); error = -EPERM; diff --git a/security/apparmor/include/label.h b/security/apparmor/include/label.h index 47942c4ba7ca..255764ab06e2 100644 --- a/security/apparmor/include/label.h +++ b/security/apparmor/include/label.h @@ -281,6 +281,7 @@ bool aa_label_init(struct aa_label *label, int size, gfp_t gfp); struct aa_label *aa_label_alloc(int size, struct aa_proxy *proxy, gfp_t gfp);
bool aa_label_is_subset(struct aa_label *set, struct aa_label *sub); +bool aa_label_is_unconfined_subset(struct aa_label *set, struct aa_label *sub); struct aa_profile *__aa_label_next_not_in_set(struct label_it *I, struct aa_label *set, struct aa_label *sub); diff --git a/security/apparmor/label.c b/security/apparmor/label.c index 6c3acae701ef..5f324d63ceaa 100644 --- a/security/apparmor/label.c +++ b/security/apparmor/label.c @@ -550,6 +550,39 @@ bool aa_label_is_subset(struct aa_label *set, struct aa_label *sub) return __aa_label_next_not_in_set(&i, set, sub) == NULL; }
+/** + * aa_label_is_unconfined_subset - test if @sub is a subset of @set + * @set: label to test against + * @sub: label to test if is subset of @set + * + * This checks for subset but taking into account unconfined. IF + * @sub contains an unconfined profile that does not have a matching + * unconfined in @set then this will not cause the test to fail. + * Conversely we don't care about an unconfined in @set that is not in + * @sub + * + * Returns: true if @sub is special_subset of @set + * else false + */ +bool aa_label_is_unconfined_subset(struct aa_label *set, struct aa_label *sub) +{ + struct label_it i = { }; + struct aa_profile *p; + + AA_BUG(!set); + AA_BUG(!sub); + + if (sub == set) + return true; + + do { + p = __aa_label_next_not_in_set(&i, set, sub); + if (p && !profile_unconfined(p)) + break; + } while (p); + + return p == NULL; +}
/**
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit e2ac07c06058ae2d58b45bbf2a2a352771d76fcb ]
Since the purgatory is a special stand-alone binary, various profiling and sanitizing options must be disabled. Having these options enabled typically will cause dependencies on various special symbols exported by special libs / stubs used by these frameworks. Since the purgatory is special, it is not linked against these stubs causing missing symbols in the purgatory if these options are not disabled.
Sync the set of disabled profiling and sanitizing options with that from drivers/firmware/efi/libstub/Makefile, adding -DDISABLE_BRANCH_PROFILING to the CFLAGS and setting:
GCOV_PROFILE := n UBSAN_SANITIZE := n
This fixes broken references to ftrace_likely_update() when CONFIG_TRACE_BRANCH_PROFILING is enabled and to __gcov_init() and __gcov_exit() when CONFIG_GCOV_KERNEL is enabled.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Borislav Petkov bp@suse.de Link: https://lkml.kernel.org/r/20200317130841.290418-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/purgatory/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile index fb4ee5444379..9733d1cc791d 100644 --- a/arch/x86/purgatory/Makefile +++ b/arch/x86/purgatory/Makefile @@ -17,7 +17,10 @@ CFLAGS_sha256.o := -D__DISABLE_EXPORTS LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined -nostdlib -z nodefaultlib targets += purgatory.ro
+# Sanitizer, etc. runtimes are unavailable and cannot be linked here. +GCOV_PROFILE := n KASAN_SANITIZE := n +UBSAN_SANITIZE := n KCOV_INSTRUMENT := n
# These are adjustments to the compiler flags used for objects that @@ -25,7 +28,7 @@ KCOV_INSTRUMENT := n
PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss -PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) +PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING
# Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That # in turn leaves some undefined symbols like __fentry__ in purgatory and not
From: Chen Zhou chenzhou10@huawei.com
[ Upstream commit 9bb086e5ba9495ac150fbbcc5c8c2bccc06261dd ]
In gb_lights_light_config(), 'light->name' is allocated by kstrndup(). It returns NULL when fails, add check for it.
Signed-off-by: Chen Zhou chenzhou10@huawei.com Acked-by: Rui Miguel Silva rmfrfs@gmail.com Link: https://lore.kernel.org/r/20200401030017.100274-1-chenzhou10@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/greybus/light.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/greybus/light.c b/drivers/staging/greybus/light.c index d6ba25f21d80..d2672b65c3f4 100644 --- a/drivers/staging/greybus/light.c +++ b/drivers/staging/greybus/light.c @@ -1026,7 +1026,8 @@ static int gb_lights_light_config(struct gb_lights *glights, u8 id)
light->channels_count = conf.channel_count; light->name = kstrndup(conf.name, NAMES_MAX, GFP_KERNEL); - + if (!light->name) + return -ENOMEM; light->channels = kcalloc(light->channels_count, sizeof(struct gb_channel), GFP_KERNEL); if (!light->channels)
From: Aiman Najjar aiman.najjar@hurranet.com
[ Upstream commit 269da10b1477c31c660288633c8d613e421b131f ]
This patch fixes remaining checkpatch warnings in rtl871x_xmit.c:
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->PrivacyKeyIndex' 636: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:636: + (u8)psecuritypriv-> + PrivacyKeyIndex);
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->XGrpKeyid' 643: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:643: + (u8)psecuritypriv-> + XGrpKeyid);
WARNING: Avoid multiple line dereference - prefer 'psecuritypriv->XGrpKeyid' 652: FILE: drivers/staging//rtl8712/rtl871x_xmit.c:652: + (u8)psecuritypriv-> + XGrpKeyid);
Signed-off-by: Aiman Najjar aiman.najjar@hurranet.com Reviewed-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/98805a72b92e9bbf933e05b827d27944663b7bc1.158550817... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/rtl8712/rtl871x_xmit.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.c b/drivers/staging/rtl8712/rtl871x_xmit.c index cc5809e49e35..7a821921c0da 100644 --- a/drivers/staging/rtl8712/rtl871x_xmit.c +++ b/drivers/staging/rtl8712/rtl871x_xmit.c @@ -590,7 +590,7 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt, addr_t addr; u8 *pframe, *mem_start, *ptxdesc; struct sta_info *psta; - struct security_priv *psecuritypriv = &padapter->securitypriv; + struct security_priv *psecpriv = &padapter->securitypriv; struct mlme_priv *pmlmepriv = &padapter->mlmepriv; struct xmit_priv *pxmitpriv = &padapter->xmitpriv; struct pkt_attrib *pattrib = &pxmitframe->attrib; @@ -633,15 +633,13 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt, case _WEP40_: case _WEP104_: WEP_IV(pattrib->iv, psta->txpn, - (u8)psecuritypriv-> - PrivacyKeyIndex); + (u8)psecpriv->PrivacyKeyIndex); break; case _TKIP_: if (bmcst) TKIP_IV(pattrib->iv, psta->txpn, - (u8)psecuritypriv-> - XGrpKeyid); + (u8)psecpriv->XGrpKeyid); else TKIP_IV(pattrib->iv, psta->txpn, 0); @@ -649,8 +647,7 @@ sint r8712_xmitframe_coalesce(struct _adapter *padapter, _pkt *pkt, case _AES_: if (bmcst) AES_IV(pattrib->iv, psta->txpn, - (u8)psecuritypriv-> - XGrpKeyid); + (u8)psecpriv->XGrpKeyid); else AES_IV(pattrib->iv, psta->txpn, 0);
From: Hsin-Yi Wang hsinyi@chromium.org
[ Upstream commit 72b29215aced394d01ca25e432963b619daa0098 ]
Fixing several unit name warnings:
Warning (unit_address_vs_reg): /oscillator@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /oscillator@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /oscillator@2: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/cpu_crit@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /reserved-memory/vpu_dma_mem_region: node has a reg or ranges property, but no unit name Warning (simple_bus_reg): /soc/pinctrl@10005000: simple-bus unit address format error, expected "1000b000" Warning (simple_bus_reg): /soc/interrupt-controller@10220000: simple-bus unit address format error, expected "10221000"
Signed-off-by: Hsin-Yi Wang hsinyi@chromium.org Link: https://lore.kernel.org/r/20200210063523.133333-4-hsinyi@chromium.org [mb: drop fixes for '_' in property name] Signed-off-by: Matthias Brugger matthias.bgg@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 5891b7151432..dec5e4113ce4 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -238,21 +238,21 @@ psci { cpu_on = <0x84000003>; };
- clk26m: oscillator@0 { + clk26m: oscillator0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; clock-output-names = "clk26m"; };
- clk32k: oscillator@1 { + clk32k: oscillator1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32000>; clock-output-names = "clk32k"; };
- cpum_ck: oscillator@2 { + cpum_ck: oscillator2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; @@ -268,19 +268,19 @@ cpu_thermal: cpu_thermal { sustainable-power = <1500>; /* milliwatts */
trips { - threshold: trip-point@0 { + threshold: trip-point0 { temperature = <68000>; hysteresis = <2000>; type = "passive"; };
- target: trip-point@1 { + target: trip-point1 { temperature = <85000>; hysteresis = <2000>; type = "passive"; };
- cpu_crit: cpu_crit@0 { + cpu_crit: cpu_crit0 { temperature = <115000>; hysteresis = <2000>; type = "critical"; @@ -288,13 +288,13 @@ cpu_crit: cpu_crit@0 { };
cooling-maps { - map@0 { + map0 { trip = <&target>; cooling-device = <&cpu0 0 0>, <&cpu1 0 0>; contribution = <3072>; }; - map@1 { + map1 { trip = <&target>; cooling-device = <&cpu2 0 0>, <&cpu3 0 0>; @@ -308,7 +308,7 @@ reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; - vpu_dma_reserved: vpu_dma_mem_region { + vpu_dma_reserved: vpu_dma_mem_region@b7000000 { compatible = "shared-dma-pool"; reg = <0 0xb7000000 0 0x500000>; alignment = <0x1000>; @@ -360,7 +360,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 { reg = <0 0x10005000 0 0x1000>; };
- pio: pinctrl@10005000 { + pio: pinctrl@1000b000 { compatible = "mediatek,mt8173-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; @@ -567,7 +567,7 @@ mipi_tx1: mipi-dphy@10216000 { status = "disabled"; };
- gic: interrupt-controller@10220000 { + gic: interrupt-controller@10221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; interrupt-parent = <&gic>;
From: Nilesh Javali njavali@marvell.com
[ Upstream commit 927527aea0e2a9c1d336c7d33f77f1911481d008 ]
For an unreachable target, offload_work is not initialized and the endpoint state is set to OFLDCONN_NONE. This results in a WARN_ON due to the check of the work function field being set to zero.
------------[ cut here ]------------ WARNING: CPU: 24 PID: 18587 at ../kernel/workqueue.c:3037 __flush_work+0x1c1/0x1d0 : Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 02/01/2020 RIP: 0010:__flush_work+0x1c1/0x1d0 Code: ba 6d 00 03 80 c9 f0 eb b6 48 c7 c7 20 ee 6c a4 e8 52 d3 04 00 0f 0b 31 c0 e9 d1 fe ff ff 48 c7 c7 20 ee 6c a4 e8 3d d3 04 00 <0f> 0b 31 c0 e9 bc fe ff ff e8 11 f3 f 00 31 f6 RSP: 0018:ffffac5a8cd47a80 EFLAGS: 00010282 RAX: 0000000000000024 RBX: ffff98d68c1fcaf0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff98ce9fd99898 RDI: ffff98ce9fd99898 RBP: ffff98d68c1fcbc0 R08: 00000000000006fa R09: 0000000000000001 R10: ffffac5a8cd47b50 R11: 0000000000000001 R12: 0000000000000000 R13: 000000000000489b R14: ffff98d68c1fc800 R15: ffff98d692132c00 FS: 00007f65f7f62280(0000) GS:ffff98ce9fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd2435e880 CR3: 0000000809334003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? class_create_release+0x40/0x40 ? klist_put+0x2c/0x80 qedi_ep_disconnect+0xdd/0x400 [qedi] iscsi_if_ep_disconnect.isra.20+0x59/0x70 [scsi_transport_iscsi] iscsi_if_rx+0x129b/0x1670 [scsi_transport_iscsi] ? __netlink_lookup+0xe7/0x160 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x30f/0x430 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1e2/0x240 ? copy_msghdr_from_user+0xd9/0x160 ___sys_sendmsg+0x88/0xd0 ? ___sys_recvmsg+0xa2/0xe0 ? hrtimer_try_to_cancel+0x25/0x100 ? do_nanosleep+0x9c/0x170 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f65f6f16107 Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 aa d2 2b 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 8 0 00 00 00 00 53 48 89 f3 48 RSP: 002b:00007ffd24367ca8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a7aeaaf110 RCX: 00007f65f6f16107 RDX: 0000000000000000 RSI: 00007ffd24367cc0 RDI: 0000000000000003 RBP: 0000000000000070 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000075c R11: 0000000000000246 R12: 00007ffd24367cc0 R13: 000055a7ae560008 R14: 00007ffd24367db0 R15: 0000000000000000 ---[ end trace 54f499c05d41f8bb ]---
Only flush if the connection endpoint state if different from OFLDCONN_NONE.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/20200408064332.19377-5-mrangankar@marvell.com Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Manish Rangankar mrangankar@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedi/qedi_iscsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c index 84a639698343..0f57c8073406 100644 --- a/drivers/scsi/qedi/qedi_iscsi.c +++ b/drivers/scsi/qedi/qedi_iscsi.c @@ -997,7 +997,8 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep) if (qedi_ep->state == EP_STATE_OFLDCONN_START) goto ep_exit_recover;
- flush_work(&qedi_ep->offload_work); + if (qedi_ep->state != EP_STATE_OFLDCONN_NONE) + flush_work(&qedi_ep->offload_work);
if (qedi_ep->conn) { qedi_conn = qedi_ep->conn;
From: Amit Kucheria amit.kucheria@linaro.org
[ Upstream commit fe2aff0c574d206f34f1864d5a0b093694c27142 ]
The thermal trip points have unit name but no reg property, so we can remove them. It also fixes the following warnings from 'make dtbs_check' after adding the thermal yaml bindings.
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: gpu-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones: modem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: gpu-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: camera-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones: modem-thermal:trips: 'trip-point@0' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\-_]{0,63}$', 'pinctrl-[0-9]+'
Signed-off-by: Amit Kucheria amit.kucheria@linaro.org Link: https://lore.kernel.org/r/2d3d045c18a2fb85b28cf304aa11ae6e6538d75e.158556245... Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5ea9fb8f2f87..340da154d4e3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -212,7 +212,7 @@ cpu2_3-thermal { thermal-sensors = <&tsens 3>;
trips { - cpu2_3_alert0: trip-point@0 { + cpu2_3_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; @@ -242,7 +242,7 @@ gpu-thermal { thermal-sensors = <&tsens 2>;
trips { - gpu_alert0: trip-point@0 { + gpu_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; @@ -262,7 +262,7 @@ camera-thermal { thermal-sensors = <&tsens 1>;
trips { - cam_alert0: trip-point@0 { + cam_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "hot"; @@ -277,7 +277,7 @@ modem-thermal { thermal-sensors = <&tsens 0>;
trips { - modem_alert0: trip-point@0 { + modem_alert0: trip-point0 { temperature = <85000>; hysteresis = <2000>; type = "hot";
From: Vincent Stehlé vincent.stehle@laposte.net
[ Upstream commit 34b6826df7462c541752cf8b1de2691b26d78ae0 ]
The PWR-LED on the bananapi m2 zero board is on when gpio PL10 is low. This has been verified on a board and in the schematics [1].
[1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents
Fixes: 8b8061fcbfae ("ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board") Signed-off-by: Vincent Stehlé vincent.stehle@laposte.net Cc: Icenowy Zheng icenowy@aosc.io Cc: Maxime Ripard mripard@kernel.org Signed-off-by: Maxime Ripard maxime@cerno.tech Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index d277d043031b..4c6704e4c57e 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -31,7 +31,7 @@ leds {
pwr_led { label = "bananapi-m2-zero:red:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ default-state = "on"; }; };
From: Yishai Hadas yishaih@mellanox.com
[ Upstream commit cf26deff9036cd3270af562dbec545239e5c7f07 ]
Fix udata response upon SRQ creation to use the UAPI structure (i.e. mlx5_ib_create_srq_resp). It did not zero the reserved field in userspace.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Link: https://lore.kernel.org/r/20200406173540.1466477-1-leon@kernel.org Signed-off-by: Yishai Hadas yishaih@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx5/srq.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/srq.c b/drivers/infiniband/hw/mlx5/srq.c index 4e7fde86c96b..c29c1f7da4a1 100644 --- a/drivers/infiniband/hw/mlx5/srq.c +++ b/drivers/infiniband/hw/mlx5/srq.c @@ -310,12 +310,18 @@ int mlx5_ib_create_srq(struct ib_srq *ib_srq, srq->msrq.event = mlx5_ib_srq_event; srq->ibsrq.ext.xrc.srq_num = srq->msrq.srqn;
- if (udata) - if (ib_copy_to_udata(udata, &srq->msrq.srqn, sizeof(__u32))) { + if (udata) { + struct mlx5_ib_create_srq_resp resp = { + .srqn = srq->msrq.srqn, + }; + + if (ib_copy_to_udata(udata, &resp, min(udata->outlen, + sizeof(resp)))) { mlx5_ib_dbg(dev, "copy to user failed\n"); err = -EFAULT; goto err_core; } + }
init_attr->attr.max_wr = srq->msrq.max - 1;
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit c58220cba2e03618659fa7d5dfae31f5ad4ae9d0 ]
The commit 3d2613c4289f ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver") introduced a use of the platform driver but missed to add the following line to it: MODULE_ALIAS("platform:gpio-dwapb");
Add this to get driver loaded automatically if platform device is registered.
Fixes: 3d2613c4289f ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver") Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Tested-by: Serge Semin fancer.lancer@gmail.com Reviewed-by: Serge Semin fancer.lancer@gmail.com Link: https://lore.kernel.org/r/20200415141534.31240-2-andriy.shevchenko@linux.int... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-dwapb.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index 02cf4c43a4c4..ed6061b5cca1 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -49,7 +49,9 @@ #define GPIO_EXT_PORTC 0x58 #define GPIO_EXT_PORTD 0x5c
+#define DWAPB_DRIVER_NAME "gpio-dwapb" #define DWAPB_MAX_PORTS 4 + #define GPIO_EXT_PORT_STRIDE 0x04 /* register stride 32 bits */ #define GPIO_SWPORT_DR_STRIDE 0x0c /* register stride 3*32 bits */ #define GPIO_SWPORT_DDR_STRIDE 0x0c /* register stride 3*32 bits */ @@ -398,7 +400,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio, return;
err = irq_alloc_domain_generic_chips(gpio->domain, ngpio, 2, - "gpio-dwapb", handle_level_irq, + DWAPB_DRIVER_NAME, handle_level_irq, IRQ_NOREQUEST, 0, IRQ_GC_INIT_NESTED_LOCK); if (err) { @@ -455,7 +457,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio, */ err = devm_request_irq(gpio->dev, pp->irq[0], dwapb_irq_handler_mfd, - IRQF_SHARED, "gpio-dwapb-mfd", gpio); + IRQF_SHARED, DWAPB_DRIVER_NAME, gpio); if (err) { dev_err(gpio->dev, "error requesting IRQ\n"); irq_domain_remove(gpio->domain); @@ -843,7 +845,7 @@ static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend,
static struct platform_driver dwapb_gpio_driver = { .driver = { - .name = "gpio-dwapb", + .name = DWAPB_DRIVER_NAME, .pm = &dwapb_gpio_pm_ops, .of_match_table = of_match_ptr(dwapb_of_match), .acpi_match_table = ACPI_PTR(dwapb_acpi_match), @@ -857,3 +859,4 @@ module_platform_driver(dwapb_gpio_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jamie Iles"); MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver"); +MODULE_ALIAS("platform:" DWAPB_DRIVER_NAME);
From: Chad Dupuis cdupuis@marvell.com
[ Upstream commit ad40f5256095c68dc17c991eb976261d5ea2daaa ]
The MFW may make a call to qed and then to qedf for protocol statistics while the function is still probing. If this happens it's possible that some members of the struct qedf_ctx may not be fully initialized which can result in a NULL pointer dereference or general protection fault.
To prevent this, add a new flag call QEDF_PROBING and set it when the __qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data() function we can check if the function is still probing and return immediantely before any uninitialized structures can be touched.
Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com Signed-off-by: Chad Dupuis cdupuis@marvell.com Signed-off-by: Saurav Kashyap skashyap@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qedf/qedf.h | 1 + drivers/scsi/qedf/qedf_main.c | 35 +++++++++++++++++++++++++++++++---- 2 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/qedf/qedf.h b/drivers/scsi/qedf/qedf.h index f3f399fe10c8..0da4e16fb23a 100644 --- a/drivers/scsi/qedf/qedf.h +++ b/drivers/scsi/qedf/qedf.h @@ -355,6 +355,7 @@ struct qedf_ctx { #define QEDF_GRCDUMP_CAPTURE 4 #define QEDF_IN_RECOVERY 5 #define QEDF_DBG_STOP_IO 6 +#define QEDF_PROBING 8 unsigned long flags; /* Miscellaneous state flags */ int fipvlan_retries; u8 num_queues; diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 59ca98f12afd..3d0e345947c1 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3153,7 +3153,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) { int rc = -EINVAL; struct fc_lport *lport; - struct qedf_ctx *qedf; + struct qedf_ctx *qedf = NULL; struct Scsi_Host *host; bool is_vf = false; struct qed_ll2_params params; @@ -3183,6 +3183,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
/* Initialize qedf_ctx */ qedf = lport_priv(lport); + set_bit(QEDF_PROBING, &qedf->flags); qedf->lport = lport; qedf->ctlr.lp = lport; qedf->pdev = pdev; @@ -3206,9 +3207,12 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) } else { /* Init pointers during recovery */ qedf = pci_get_drvdata(pdev); + set_bit(QEDF_PROBING, &qedf->flags); lport = qedf->lport; }
+ QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe started.\n"); + host = lport->host;
/* Allocate mempool for qedf_io_work structs */ @@ -3513,6 +3517,10 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) else fc_fabric_login(lport);
+ QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n"); + + clear_bit(QEDF_PROBING, &qedf->flags); + /* All good */ return 0;
@@ -3538,6 +3546,11 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) err1: scsi_host_put(lport->host); err0: + if (qedf) { + QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n"); + + clear_bit(QEDF_PROBING, &qedf->flags); + } return rc; }
@@ -3687,11 +3700,25 @@ void qedf_get_protocol_tlv_data(void *dev, void *data) { struct qedf_ctx *qedf = dev; struct qed_mfw_tlv_fcoe *fcoe = data; - struct fc_lport *lport = qedf->lport; - struct Scsi_Host *host = lport->host; - struct fc_host_attrs *fc_host = shost_to_fc_host(host); + struct fc_lport *lport; + struct Scsi_Host *host; + struct fc_host_attrs *fc_host; struct fc_host_statistics *hst;
+ if (!qedf) { + QEDF_ERR(NULL, "qedf is null.\n"); + return; + } + + if (test_bit(QEDF_PROBING, &qedf->flags)) { + QEDF_ERR(&qedf->dbg_ctx, "Function is still probing.\n"); + return; + } + + lport = qedf->lport; + host = lport->host; + fc_host = shost_to_fc_host(host); + /* Force a refresh of the fc_host stats including offload stats */ hst = qedf_fc_get_host_stats(host);
From: Lars-Peter Clausen lars@metafoo.de
[ Upstream commit b7329249ea5b08b2a1c2c3f24a2f4c495c4f14b8 ]
Before activating a buffer make sure that at least one channel is enabled. Activating a buffer with 0 channels enabled doesn't make too much sense and disallowing this case makes sure that individual driver don't have to add special case code to handle it.
Currently, without this patch enabling a buffer is possible and no error is produced. With this patch -EINVAL is returned.
An example of execution with this patch and some instrumented print-code: root@analog:~# cd /sys/bus/iio/devices/iio:device3/buffer root@analog:/sys/bus/iio/devices/iio:device3/buffer# echo 1 > enable 0: iio_verify_update 748 indio_dev->masklength 2 *insert_buffer->scan_mask 00000000 1: iio_verify_update 753 2:__iio_update_buffers 1115 ret -22 3: iio_buffer_store_enable 1241 ret -22 -bash: echo: write error: Invalid argument 1, 2 & 3 are exit-error paths. 0 the first print in iio_verify_update() rergardless of error path.
Without this patch (and same instrumented print-code): root@analog:~# cd /sys/bus/iio/devices/iio:device3/buffer root@analog:/sys/bus/iio/devices/iio:device3/buffer# echo 1 > enable 0: iio_verify_update 748 indio_dev->masklength 2 *insert_buffer->scan_mask 00000000 root@analog:/sys/bus/iio/devices/iio:device3/buffer# Buffer is enabled with no error.
Note from Jonathan: Probably not suitable for automatic application to stable. This has been there from the very start. It tidies up an odd corner case but won't effect any 'real' users.
Fixes: 84b36ce5f79c0 ("staging:iio: Add support for multiple buffers") Signed-off-by: Lars-Peter Clausen lars@metafoo.de Signed-off-by: Alexandru Ardelean alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/industrialio-buffer.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 112225c0e486..caacc9d00636 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -687,6 +687,13 @@ static int iio_verify_update(struct iio_dev *indio_dev, bool scan_timestamp; unsigned int modes;
+ if (insert_buffer && + bitmap_empty(insert_buffer->scan_mask, indio_dev->masklength)) { + dev_dbg(&indio_dev->dev, + "At least one scan element must be enabled first\n"); + return -EINVAL; + } + memset(config, 0, sizeof(*config)); config->watermark = ~0;
From: Jason Yan yanaijie@huawei.com
[ Upstream commit 4b4e8e93eccc2abc4209fe226ec89e7fbe9f3c61 ]
The rza1l_swio_entries referred to the wrong array rza1h_swio_pins, which was intended to be rza1l_swio_pins. So let's fix it.
This is detected by the following gcc warning:
drivers/pinctrl/pinctrl-rza1.c:401:35: warning: ‘rza1l_swio_pins’ defined but not used [-Wunused-const-variable=] static const struct rza1_swio_pin rza1l_swio_pins[] = { ^~~~~~~~~~~~~~~
Fixes: 039bc58e73b77723 ("pinctrl: rza1: Add support for RZ/A1L") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Jason Yan yanaijie@huawei.com Link: https://lore.kernel.org/r/20200417111604.19143-1-yanaijie@huawei.com Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-rza1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c index 017fc6b3e27e..ca9da61cfc4e 100644 --- a/drivers/pinctrl/pinctrl-rza1.c +++ b/drivers/pinctrl/pinctrl-rza1.c @@ -418,7 +418,7 @@ static const struct rza1_bidir_entry rza1l_bidir_entries[RZA1_NPORTS] = { };
static const struct rza1_swio_entry rza1l_swio_entries[] = { - [0] = { ARRAY_SIZE(rza1h_swio_pins), rza1h_swio_pins }, + [0] = { ARRAY_SIZE(rza1l_swio_pins), rza1l_swio_pins }, };
/* RZ/A1L (r7s72102x) pinmux flags table */
From: Vivek Goyal vgoyal@redhat.com
[ Upstream commit bb737bbe48bea9854455cb61ea1dc06e92ce586c ]
In virtiofs (unlike in regular fuse) processing of async replies is serialized. This can result in a deadlock in rare corner cases when there's a circular dependency between the completion of two or more async replies.
Such a deadlock can be reproduced with xfstests:generic/503 if TEST_DIR == SCRATCH_MNT (which is a misconfiguration):
- Process A is waiting for page lock in worker thread context and blocked (virtio_fs_requests_done_work()). - Process B is holding page lock and waiting for pending writes to finish (fuse_wait_on_page_writeback()). - Write requests are waiting in virtqueue and can't complete because worker thread is blocked on page lock (process A).
Fix this by creating a unique work_struct for each async reply that can block (O_DIRECT read).
Fixes: a62a8ef9d97d ("virtio-fs: add virtiofs filesystem") Signed-off-by: Vivek Goyal vgoyal@redhat.com Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fuse/file.c | 1 + fs/fuse/fuse_i.h | 1 + fs/fuse/virtio_fs.c | 106 +++++++++++++++++++++++++++++--------------- 3 files changed, 73 insertions(+), 35 deletions(-)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 3dd37a998ea9..713d55a61890 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -712,6 +712,7 @@ static ssize_t fuse_async_req_send(struct fuse_conn *fc, spin_unlock(&io->lock);
ia->ap.args.end = fuse_aio_complete_req; + ia->ap.args.may_block = io->should_dirty; err = fuse_simple_background(fc, &ia->ap.args, GFP_KERNEL); if (err) fuse_aio_complete_req(fc, &ia->ap.args, err); diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index ca344bf71404..d7cde216fc87 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -249,6 +249,7 @@ struct fuse_args { bool out_argvar:1; bool page_zeroing:1; bool page_replace:1; + bool may_block:1; struct fuse_in_arg in_args[3]; struct fuse_arg out_args[2]; void (*end)(struct fuse_conn *fc, struct fuse_args *args, int error); diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c index a5c86048b96e..7505f8102762 100644 --- a/fs/fuse/virtio_fs.c +++ b/fs/fuse/virtio_fs.c @@ -55,6 +55,12 @@ struct virtio_fs_forget { struct list_head list; };
+struct virtio_fs_req_work { + struct fuse_req *req; + struct virtio_fs_vq *fsvq; + struct work_struct done_work; +}; + static int virtio_fs_enqueue_req(struct virtio_fs_vq *fsvq, struct fuse_req *req, bool in_flight);
@@ -443,19 +449,67 @@ static void copy_args_from_argbuf(struct fuse_args *args, struct fuse_req *req) }
/* Work function for request completion */ +static void virtio_fs_request_complete(struct fuse_req *req, + struct virtio_fs_vq *fsvq) +{ + struct fuse_pqueue *fpq = &fsvq->fud->pq; + struct fuse_conn *fc = fsvq->fud->fc; + struct fuse_args *args; + struct fuse_args_pages *ap; + unsigned int len, i, thislen; + struct page *page; + + /* + * TODO verify that server properly follows FUSE protocol + * (oh.uniq, oh.len) + */ + args = req->args; + copy_args_from_argbuf(args, req); + + if (args->out_pages && args->page_zeroing) { + len = args->out_args[args->out_numargs - 1].size; + ap = container_of(args, typeof(*ap), args); + for (i = 0; i < ap->num_pages; i++) { + thislen = ap->descs[i].length; + if (len < thislen) { + WARN_ON(ap->descs[i].offset); + page = ap->pages[i]; + zero_user_segment(page, len, thislen); + len = 0; + } else { + len -= thislen; + } + } + } + + spin_lock(&fpq->lock); + clear_bit(FR_SENT, &req->flags); + spin_unlock(&fpq->lock); + + fuse_request_end(fc, req); + spin_lock(&fsvq->lock); + dec_in_flight_req(fsvq); + spin_unlock(&fsvq->lock); +} + +static void virtio_fs_complete_req_work(struct work_struct *work) +{ + struct virtio_fs_req_work *w = + container_of(work, typeof(*w), done_work); + + virtio_fs_request_complete(w->req, w->fsvq); + kfree(w); +} + static void virtio_fs_requests_done_work(struct work_struct *work) { struct virtio_fs_vq *fsvq = container_of(work, struct virtio_fs_vq, done_work); struct fuse_pqueue *fpq = &fsvq->fud->pq; - struct fuse_conn *fc = fsvq->fud->fc; struct virtqueue *vq = fsvq->vq; struct fuse_req *req; - struct fuse_args_pages *ap; struct fuse_req *next; - struct fuse_args *args; - unsigned int len, i, thislen; - struct page *page; + unsigned int len; LIST_HEAD(reqs);
/* Collect completed requests off the virtqueue */ @@ -473,38 +527,20 @@ static void virtio_fs_requests_done_work(struct work_struct *work)
/* End requests */ list_for_each_entry_safe(req, next, &reqs, list) { - /* - * TODO verify that server properly follows FUSE protocol - * (oh.uniq, oh.len) - */ - args = req->args; - copy_args_from_argbuf(args, req); - - if (args->out_pages && args->page_zeroing) { - len = args->out_args[args->out_numargs - 1].size; - ap = container_of(args, typeof(*ap), args); - for (i = 0; i < ap->num_pages; i++) { - thislen = ap->descs[i].length; - if (len < thislen) { - WARN_ON(ap->descs[i].offset); - page = ap->pages[i]; - zero_user_segment(page, len, thislen); - len = 0; - } else { - len -= thislen; - } - } - } - - spin_lock(&fpq->lock); - clear_bit(FR_SENT, &req->flags); list_del_init(&req->list); - spin_unlock(&fpq->lock);
- fuse_request_end(fc, req); - spin_lock(&fsvq->lock); - dec_in_flight_req(fsvq); - spin_unlock(&fsvq->lock); + /* blocking async request completes in a worker context */ + if (req->args->may_block) { + struct virtio_fs_req_work *w; + + w = kzalloc(sizeof(*w), GFP_NOFS | __GFP_NOFAIL); + INIT_WORK(&w->done_work, virtio_fs_complete_req_work); + w->fsvq = fsvq; + w->req = req; + schedule_work(&w->done_work); + } else { + virtio_fs_request_complete(req, fsvq); + } } }
From: Jonathan Marek jonathan@marek.ca
[ Upstream commit 61d2ca503d0b55d2849fd656ce51d8e1e9ba0b6c ]
This was mistakenly copied from the downstream dts, however the upstream driver works differently.
I only tested this with the pm8150_gpios node (used with volume button), but the 2 others should be the same.
Fixes: e92b61c8e775 ("arm64: dts: qcom: pm8150l: Add base dts file") Fixes: 229d5bcad0d0 ("arm64: dts: qcom: pm8150b: Add base dts file") Fixes: 5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file") Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Jonathan Marek jonathan@marek.ca Link: https://lore.kernel.org/r/20200420153543.14512-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 14 ++------------ arch/arm64/boot/dts/qcom/pm8150b.dtsi | 14 ++------------ arch/arm64/boot/dts/qcom/pm8150l.dtsi | 14 ++------------ 3 files changed, 6 insertions(+), 36 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index b6e304748a57..c0b197458665 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -73,18 +73,8 @@ pm8150_gpios: gpio@c000 { reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>, - <0x0 0xc1 0x0 IRQ_TYPE_NONE>, - <0x0 0xc2 0x0 IRQ_TYPE_NONE>, - <0x0 0xc3 0x0 IRQ_TYPE_NONE>, - <0x0 0xc4 0x0 IRQ_TYPE_NONE>, - <0x0 0xc5 0x0 IRQ_TYPE_NONE>, - <0x0 0xc6 0x0 IRQ_TYPE_NONE>, - <0x0 0xc7 0x0 IRQ_TYPE_NONE>, - <0x0 0xc8 0x0 IRQ_TYPE_NONE>, - <0x0 0xc9 0x0 IRQ_TYPE_NONE>, - <0x0 0xca 0x0 IRQ_TYPE_NONE>, - <0x0 0xcb 0x0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; };
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 322379d5c31f..40b5d75a4a1d 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -62,18 +62,8 @@ pm8150b_gpios: gpio@c000 { reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>, - <0x2 0xc1 0x0 IRQ_TYPE_NONE>, - <0x2 0xc2 0x0 IRQ_TYPE_NONE>, - <0x2 0xc3 0x0 IRQ_TYPE_NONE>, - <0x2 0xc4 0x0 IRQ_TYPE_NONE>, - <0x2 0xc5 0x0 IRQ_TYPE_NONE>, - <0x2 0xc6 0x0 IRQ_TYPE_NONE>, - <0x2 0xc7 0x0 IRQ_TYPE_NONE>, - <0x2 0xc8 0x0 IRQ_TYPE_NONE>, - <0x2 0xc9 0x0 IRQ_TYPE_NONE>, - <0x2 0xca 0x0 IRQ_TYPE_NONE>, - <0x2 0xcb 0x0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; };
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index eb0e9a090e42..cf05e0685d10 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -56,18 +56,8 @@ pm8150l_gpios: gpio@c000 { reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>, - <0x4 0xc1 0x0 IRQ_TYPE_NONE>, - <0x4 0xc2 0x0 IRQ_TYPE_NONE>, - <0x4 0xc3 0x0 IRQ_TYPE_NONE>, - <0x4 0xc4 0x0 IRQ_TYPE_NONE>, - <0x4 0xc5 0x0 IRQ_TYPE_NONE>, - <0x4 0xc6 0x0 IRQ_TYPE_NONE>, - <0x4 0xc7 0x0 IRQ_TYPE_NONE>, - <0x4 0xc8 0x0 IRQ_TYPE_NONE>, - <0x4 0xc9 0x0 IRQ_TYPE_NONE>, - <0x4 0xca 0x0 IRQ_TYPE_NONE>, - <0x4 0xcb 0x0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; };
From: Christoph Hellwig hch@lst.de
[ Upstream commit 459b1f86f1cba7de813fbc335df476c111feec22 ]
As far as the device is concerned the dma address is the physical address. There is no need to convert it to a physical address, especially not using dma-direct internals that are not available to drivers and which will interact badly with IOMMUs. Last but not least the commit introducing it claimed to just fix a type issue, but actually changed behavior.
Fixes: 6e37ccf78a532 ("firmware: qcom_scm: Use proper types for dma mappings") Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20200414123136.441454-1-hch@lst.de Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/qcom_scm.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index 4802ab170fe5..b9fdc20b4eb9 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -9,7 +9,6 @@ #include <linux/init.h> #include <linux/cpumask.h> #include <linux/export.h> -#include <linux/dma-direct.h> #include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/types.h> @@ -441,8 +440,7 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, struct qcom_scm_mem_map_info *mem_to_map; phys_addr_t mem_to_map_phys; phys_addr_t dest_phys; - phys_addr_t ptr_phys; - dma_addr_t ptr_dma; + dma_addr_t ptr_phys; size_t mem_to_map_sz; size_t dest_sz; size_t src_sz; @@ -459,10 +457,9 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(dest_sz, SZ_64);
- ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_dma, GFP_KERNEL); + ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL); if (!ptr) return -ENOMEM; - ptr_phys = dma_to_phys(__scm->dev, ptr_dma);
/* Fill source vmid detail */ src = ptr; @@ -490,7 +487,7 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz, ptr_phys, src_sz, dest_phys, dest_sz); - dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_dma); + dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_phys); if (ret) { dev_err(__scm->dev, "Assign memory protection call failed %d\n", ret);
From: Xiyu Yang xiyuyang19@fudan.edu.cn
[ Upstream commit 57a66838e1494cd881b7f4e110ec685736e8e3ca ]
gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt.
When gasket_sysfs_put_attr() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one path of gasket_sysfs_put_attr(). When mapping attribute is unknown, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak.
Fix this issue by calling put_mapping() when put attribute fails due to unknown attribute.
Signed-off-by: Xiyu Yang xiyuyang19@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Link: https://lore.kernel.org/r/1587618895-13660-1-git-send-email-xiyuyang19@fudan... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/gasket/gasket_sysfs.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/staging/gasket/gasket_sysfs.c b/drivers/staging/gasket/gasket_sysfs.c index 5f0e089573a2..ad852ea1d4a9 100644 --- a/drivers/staging/gasket/gasket_sysfs.c +++ b/drivers/staging/gasket/gasket_sysfs.c @@ -339,6 +339,7 @@ void gasket_sysfs_put_attr(struct device *device,
dev_err(device, "Unable to put unknown attribute: %s\n", attr->attr.attr.name); + put_mapping(mapping); } EXPORT_SYMBOL(gasket_sysfs_put_attr);
From: Xiyu Yang xiyuyang19@fudan.edu.cn
[ Upstream commit e3436ce60cf5f5eaedda2b8c622f69feb97595e2 ]
gasket_sysfs_register_store() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt.
When gasket_sysfs_register_store() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of gasket_sysfs_register_store(). When gasket_dev is NULL, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak.
Fix this issue by calling put_mapping() when gasket_dev is NULL.
Signed-off-by: Xiyu Yang xiyuyang19@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/gasket/gasket_sysfs.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/staging/gasket/gasket_sysfs.c b/drivers/staging/gasket/gasket_sysfs.c index ad852ea1d4a9..af26bc9f184a 100644 --- a/drivers/staging/gasket/gasket_sysfs.c +++ b/drivers/staging/gasket/gasket_sysfs.c @@ -373,6 +373,7 @@ ssize_t gasket_sysfs_register_store(struct device *device, gasket_dev = mapping->gasket_dev; if (!gasket_dev) { dev_err(device, "Device driver may have been removed\n"); + put_mapping(mapping); return 0; }
From: Alexander Tsoy alexander@tsoy.me
[ Upstream commit f0bd62b64016508938df9babe47f65c2c727d25c ]
For computation of the the next frame size current value of fs/fps and accumulated fractional parts of fs/fps are used, where values are stored in Q16.16 format. This is quite natural for computing frame size for asynchronous endpoints driven by explicit feedback, since in this case fs/fps is a value provided by the feedback endpoint and it's already in the Q format. If an error is accumulated over time, the device can adjust fs/fps value to prevent buffer overruns/underruns.
But for synchronous endpoints the accuracy provided by these computations is not enough. Due to accumulated error the driver periodically produces frames with incorrect size (+/- 1 audio sample).
This patch fixes this issue by implementing a different algorithm for frame size computation. It is based on accumulating of the remainders from division fs/fps and it doesn't accumulate errors over time. This new method is enabled for synchronous and adaptive playback endpoints.
Signed-off-by: Alexander Tsoy alexander@tsoy.me Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.me Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/card.h | 4 ++++ sound/usb/endpoint.c | 43 ++++++++++++++++++++++++++++++++++++++----- sound/usb/endpoint.h | 1 + sound/usb/pcm.c | 2 ++ 4 files changed, 45 insertions(+), 5 deletions(-)
diff --git a/sound/usb/card.h b/sound/usb/card.h index 395403a2d33f..820e564656ed 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -84,6 +84,10 @@ struct snd_usb_endpoint { dma_addr_t sync_dma; /* DMA address of syncbuf */
unsigned int pipe; /* the data i/o pipe */ + unsigned int framesize[2]; /* small/large frame sizes in samples */ + unsigned int sample_rem; /* remainder from division fs/fps */ + unsigned int sample_accum; /* sample accumulator */ + unsigned int fps; /* frames per second */ unsigned int freqn; /* nominal sampling rate in fs/fps in Q16.16 format */ unsigned int freqm; /* momentary sampling rate in fs/fps in Q16.16 format */ int freqshift; /* how much to shift the feedback value to get Q16.16 */ diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 4a9a2f6ef5a4..d8dc7cb56d43 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -124,12 +124,12 @@ int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep)
/* * For streaming based on information derived from sync endpoints, - * prepare_outbound_urb_sizes() will call next_packet_size() to + * prepare_outbound_urb_sizes() will call slave_next_packet_size() to * determine the number of samples to be sent in the next packet. * - * For implicit feedback, next_packet_size() is unused. + * For implicit feedback, slave_next_packet_size() is unused. */ -int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) +int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep) { unsigned long flags; int ret; @@ -146,6 +146,29 @@ int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) return ret; }
+/* + * For adaptive and synchronous endpoints, prepare_outbound_urb_sizes() + * will call next_packet_size() to determine the number of samples to be + * sent in the next packet. + */ +int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) +{ + int ret; + + if (ep->fill_max) + return ep->maxframesize; + + ep->sample_accum += ep->sample_rem; + if (ep->sample_accum >= ep->fps) { + ep->sample_accum -= ep->fps; + ret = ep->framesize[1]; + } else { + ret = ep->framesize[0]; + } + + return ret; +} + static void retire_outbound_urb(struct snd_usb_endpoint *ep, struct snd_urb_ctx *urb_ctx) { @@ -190,6 +213,8 @@ static void prepare_silent_urb(struct snd_usb_endpoint *ep,
if (ctx->packet_size[i]) counts = ctx->packet_size[i]; + else if (ep->sync_master) + counts = snd_usb_endpoint_slave_next_packet_size(ep); else counts = snd_usb_endpoint_next_packet_size(ep);
@@ -874,10 +899,17 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, ep->maxpacksize = fmt->maxpacksize; ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
- if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) + if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) { ep->freqn = get_usb_full_speed_rate(rate); - else + ep->fps = 1000; + } else { ep->freqn = get_usb_high_speed_rate(rate); + ep->fps = 8000; + } + + ep->sample_rem = rate % ep->fps; + ep->framesize[0] = rate / ep->fps; + ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps;
/* calculate the frequency in 16.16 format */ ep->freqm = ep->freqn; @@ -936,6 +968,7 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) ep->active_mask = 0; ep->unlink_mask = 0; ep->phase = 0; + ep->sample_accum = 0;
snd_usb_endpoint_start_quirk(ep);
diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h index 63a39d4fa8d8..d23fa0a8c11b 100644 --- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -28,6 +28,7 @@ void snd_usb_endpoint_release(struct snd_usb_endpoint *ep); void snd_usb_endpoint_free(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep); +int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep); int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep);
void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index ad8f38380aa3..e52d129085c0 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1575,6 +1575,8 @@ static void prepare_playback_urb(struct snd_usb_substream *subs, for (i = 0; i < ctx->packets; i++) { if (ctx->packet_size[i]) counts = ctx->packet_size[i]; + else if (ep->sync_master) + counts = snd_usb_endpoint_slave_next_packet_size(ep); else counts = snd_usb_endpoint_next_packet_size(ep);
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 5b6cc38f3f3f37109ce72b60bda215a5f6892c0b ]
The linked list entry from FIFO is peeked at queue_pending_output_urbs() but the actual element pop-out is performed outside the spinlock, and it's potentially racy.
Do delete the link at the right place inside the spinlock.
Fixes: 8fdff6a319e7 ("ALSA: snd-usb: implement new endpoint streaming model") Link: https://lore.kernel.org/r/20200424074016.14301-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/endpoint.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index d8dc7cb56d43..50104f658ed4 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -346,17 +346,17 @@ static void queue_pending_output_urbs(struct snd_usb_endpoint *ep) ep->next_packet_read_pos %= MAX_URBS;
/* take URB out of FIFO */ - if (!list_empty(&ep->ready_playback_urbs)) + if (!list_empty(&ep->ready_playback_urbs)) { ctx = list_first_entry(&ep->ready_playback_urbs, struct snd_urb_ctx, ready_list); + list_del_init(&ctx->ready_list); + } } spin_unlock_irqrestore(&ep->lock, flags);
if (ctx == NULL) return;
- list_del_init(&ctx->ready_list); - /* copy over the length information */ for (i = 0; i < packet->packets; i++) ctx->packet_size[i] = packet->packet_size[i];
From: Stephan Gerhold stephan@gerhold.net
[ Upstream commit 7842087b0196d674ed877d768de8f2a34d7fdc53 ]
MMS345L is another first generation touch screen from Melfas, which uses mostly the same registers as MMS152.
However, there is some garbage printed during initialization. Apparently MMS345L does not have the MMS152_COMPAT_GROUP register that is read+printed during initialization.
TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06
On earlier kernel versions the compat group was actually printed as an ASCII control character, seems like it gets escaped now.
But we probably shouldn't print something from a random register.
Add a separate "melfas,mms345l" compatible that avoids reading from the MMS152_COMPAT_GROUP register. This might also help in case there is some other device-specific quirk in the future.
Signed-off-by: Stephan Gerhold stephan@gerhold.net Reviewed-by: Andi Shyti andi@etezian.org Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/mms114.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index fca908ba4841..fb28fd2d6f1c 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -54,6 +54,7 @@ enum mms_type { TYPE_MMS114 = 114, TYPE_MMS152 = 152, + TYPE_MMS345L = 345, };
struct mms114_data { @@ -250,6 +251,15 @@ static int mms114_get_version(struct mms114_data *data) int error;
switch (data->type) { + case TYPE_MMS345L: + error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf); + if (error) + return error; + + dev_info(dev, "TSP FW Rev: bootloader 0x%x / core 0x%x / config 0x%x\n", + buf[0], buf[1], buf[2]); + break; + case TYPE_MMS152: error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf); if (error) @@ -287,8 +297,8 @@ static int mms114_setup_regs(struct mms114_data *data) if (error < 0) return error;
- /* MMS152 has no configuration or power on registers */ - if (data->type == TYPE_MMS152) + /* Only MMS114 has configuration and power on registers */ + if (data->type != TYPE_MMS114) return 0;
error = mms114_set_active(data, true); @@ -598,6 +608,9 @@ static const struct of_device_id mms114_dt_match[] = { }, { .compatible = "melfas,mms152", .data = (void *)TYPE_MMS152, + }, { + .compatible = "melfas,mms345l", + .data = (void *)TYPE_MMS345L, }, { } };
From: Julian Wiedmann jwi@linux.ibm.com
[ Upstream commit 75e82bec6b2622c6f455b7a543fb5476a5d0eed7 ]
qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq(). If the subsequent qdio_establish_thinint() fails, we miss to put the DSCI again. Thus the DSCI isn't available for re-use. Given enough of such errors, we could end up with having only the shared DSCI available.
Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with such an error internally.
Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.") Signed-off-by: Julian Wiedmann jwi@linux.ibm.com Reviewed-by: Benjamin Block bblock@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/cio/qdio.h | 1 - drivers/s390/cio/qdio_setup.c | 1 - drivers/s390/cio/qdio_thinint.c | 14 ++++++++------ 3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h index a58b45df95d7..3b0a4483a252 100644 --- a/drivers/s390/cio/qdio.h +++ b/drivers/s390/cio/qdio.h @@ -372,7 +372,6 @@ static inline int multicast_outbound(struct qdio_q *q) extern u64 last_ai_time;
/* prototypes for thin interrupt */ -void qdio_setup_thinint(struct qdio_irq *irq_ptr); int qdio_establish_thinint(struct qdio_irq *irq_ptr); void qdio_shutdown_thinint(struct qdio_irq *irq_ptr); void tiqdio_add_input_queues(struct qdio_irq *irq_ptr); diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index ee0b3c586211..9dc56aa3ae55 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -479,7 +479,6 @@ int qdio_setup_irq(struct qdio_initialize *init_data) setup_queues(irq_ptr, init_data);
setup_qib(irq_ptr, init_data); - qdio_setup_thinint(irq_ptr); set_impl_params(irq_ptr, init_data->qib_param_field_format, init_data->qib_param_field, init_data->input_slib_elements, diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c index 93ee067c10ca..ddf780b12d40 100644 --- a/drivers/s390/cio/qdio_thinint.c +++ b/drivers/s390/cio/qdio_thinint.c @@ -268,17 +268,19 @@ int __init tiqdio_register_thinints(void)
int qdio_establish_thinint(struct qdio_irq *irq_ptr) { + int rc; + if (!is_thinint_irq(irq_ptr)) return 0; - return set_subchannel_ind(irq_ptr, 0); -}
-void qdio_setup_thinint(struct qdio_irq *irq_ptr) -{ - if (!is_thinint_irq(irq_ptr)) - return; irq_ptr->dsci = get_indicator(); DBF_HEX(&irq_ptr->dsci, sizeof(void *)); + + rc = set_subchannel_ind(irq_ptr, 0); + if (rc) + put_indicator(irq_ptr->dsci); + + return rc; }
void qdio_shutdown_thinint(struct qdio_irq *irq_ptr)
From: Raghavendra Rao Ananta rananta@codeaurora.org
[ Upstream commit e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe ]
Potentially, hvc_open() can be called in parallel when two tasks calls open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add() callback in the function fails, where it sets the tty->driver_data to NULL, the parallel hvc_open() can see this NULL and cause a memory abort. Hence, serialize hvc_open and check if tty->private_data is NULL before proceeding ahead.
The issue can be easily reproduced by launching two tasks simultaneously that does nothing but open() and close() on /dev/hvcX. For example: $ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 &
Signed-off-by: Raghavendra Rao Ananta rananta@codeaurora.org Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/hvc/hvc_console.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index cdcc64ea2554..f8e43a6faea9 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -75,6 +75,8 @@ static LIST_HEAD(hvc_structs); */ static DEFINE_MUTEX(hvc_structs_mutex);
+/* Mutex to serialize hvc_open */ +static DEFINE_MUTEX(hvc_open_mutex); /* * This value is used to assign a tty->index value to a hvc_struct based * upon order of exposure via hvc_probe(), when we can not match it to @@ -346,16 +348,24 @@ static int hvc_install(struct tty_driver *driver, struct tty_struct *tty) */ static int hvc_open(struct tty_struct *tty, struct file * filp) { - struct hvc_struct *hp = tty->driver_data; + struct hvc_struct *hp; unsigned long flags; int rc = 0;
+ mutex_lock(&hvc_open_mutex); + + hp = tty->driver_data; + if (!hp) { + rc = -EIO; + goto out; + } + spin_lock_irqsave(&hp->port.lock, flags); /* Check and then increment for fast path open. */ if (hp->port.count++ > 0) { spin_unlock_irqrestore(&hp->port.lock, flags); hvc_kick(); - return 0; + goto out; } /* else count == 0 */ spin_unlock_irqrestore(&hp->port.lock, flags);
@@ -383,6 +393,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) /* Force wakeup of the polling thread */ hvc_kick();
+out: + mutex_unlock(&hvc_open_mutex); return rc; }
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
[ Upstream commit b58c663059b484f7ff547d076a34cf6d7a302e56 ]
Get drvdata directly from parent instead of ngd dev, as ngd dev can probe defer and previously set drvdata will become null.
Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20200417093618.7929-1-srinivas.kandagatla@linaro.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/slimbus/qcom-ngd-ctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 29fbab55c3b3..01a17d84b606 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1354,7 +1354,6 @@ static int of_qcom_slim_ngd_register(struct device *parent, ngd->pdev->driver_override = QCOM_SLIM_NGD_DRV_NAME; ngd->pdev->dev.of_node = node; ctrl->ngd = ngd; - platform_set_drvdata(ngd->pdev, ctrl);
platform_device_add(ngd->pdev); ngd->base = ctrl->base + ngd->id * data->offset + @@ -1369,12 +1368,13 @@ static int of_qcom_slim_ngd_register(struct device *parent,
static int qcom_slim_ngd_probe(struct platform_device *pdev) { - struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev); struct device *dev = &pdev->dev; + struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev->parent); int ret;
ctrl->ctrl.dev = dev;
+ platform_set_drvdata(pdev, ctrl); pm_runtime_use_autosuspend(dev); pm_runtime_set_autosuspend_delay(dev, QCOM_SLIM_NGD_AUTOSUSPEND); pm_runtime_set_suspended(dev);
From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit da1978ac3d6cf278dedf5edbf350445a0fff2f08 ]
Use hdmi_pll_lvds_out as parent of the vid_pll_in_sel clock. It's not easy to see that the vendor kernel does the same, but it actually does. meson_clk_pll_ops in mainline still cannot fully recalculate all rates from the HDMI PLL registers because some register bits (at the time of writing it's unknown which bits are used for this) double the HDMI PLL output rate (compared to simply considering M, N and FRAC) for some (but not all) PLL settings.
Update the vid_pll_in_sel parent so our clock calculation works for simple clock settings like the CVBS output (where no rate doubling is going on). The PLL ops need to be fixed later on for more complex clock settings (all HDMI rates).
Fixes: 6cb57c678bb70 ("clk: meson: meson8b: add the read-only video clock trees") Suggested-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Jerome Brunet jbrunet@baylibre.com Link: https://lore.kernel.org/r/20200417184127.1319871-2-martin.blumenstingl@googl... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/meson/meson8b.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 8856ce476ccf..ab0b56daec54 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -1071,7 +1071,7 @@ static struct clk_regmap meson8b_vid_pll_in_sel = { * Meson8m2: vid2_pll */ .parent_hws = (const struct clk_hw *[]) { - &meson8b_hdmi_pll_dco.hw + &meson8b_hdmi_pll_lvds_out.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT,
From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit 0d3051c790ed2ef6bd91b92b07220313f06b95b3 ]
CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST and CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE are active low. This means: - asserting them requires setting the register value to 0 - de-asserting them requires setting the register value to 1
Set the register value accordingly for these two reset lines by setting the inverted the register value compared to all other reset lines.
Fixes: 189621726bc2f6 ("clk: meson: meson8b: register the built-in reset controller") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Jerome Brunet jbrunet@baylibre.com Link: https://lore.kernel.org/r/20200417184127.1319871-3-martin.blumenstingl@googl... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/meson/meson8b.c | 79 ++++++++++++++++++++++++++----------- 1 file changed, 56 insertions(+), 23 deletions(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index ab0b56daec54..52337a100a90 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -3491,54 +3491,87 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = { static const struct meson8b_clk_reset_line { u32 reg; u8 bit_idx; + bool active_low; } meson8b_clk_reset_bits[] = { [CLKC_RESET_L2_CACHE_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 30 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 30, + .active_low = false, }, [CLKC_RESET_AXI_64_TO_128_BRIDGE_A5_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 29 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 29, + .active_low = false, }, [CLKC_RESET_SCU_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 28 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 28, + .active_low = false, }, [CLKC_RESET_CPU3_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 27 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 27, + .active_low = false, }, [CLKC_RESET_CPU2_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 26 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 26, + .active_low = false, }, [CLKC_RESET_CPU1_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 25 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 25, + .active_low = false, }, [CLKC_RESET_CPU0_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 24 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 24, + .active_low = false, }, [CLKC_RESET_A5_GLOBAL_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 18 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 18, + .active_low = false, }, [CLKC_RESET_A5_AXI_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 17 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 17, + .active_low = false, }, [CLKC_RESET_A5_ABP_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL0, .bit_idx = 16 + .reg = HHI_SYS_CPU_CLK_CNTL0, + .bit_idx = 16, + .active_low = false, }, [CLKC_RESET_AXI_64_TO_128_BRIDGE_MMC_SOFT_RESET] = { - .reg = HHI_SYS_CPU_CLK_CNTL1, .bit_idx = 30 + .reg = HHI_SYS_CPU_CLK_CNTL1, + .bit_idx = 30, + .active_low = false, }, [CLKC_RESET_VID_CLK_CNTL_SOFT_RESET] = { - .reg = HHI_VID_CLK_CNTL, .bit_idx = 15 + .reg = HHI_VID_CLK_CNTL, + .bit_idx = 15, + .active_low = false, }, [CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_POST] = { - .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 7 + .reg = HHI_VID_DIVIDER_CNTL, + .bit_idx = 7, + .active_low = false, }, [CLKC_RESET_VID_DIVIDER_CNTL_SOFT_RESET_PRE] = { - .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 3 + .reg = HHI_VID_DIVIDER_CNTL, + .bit_idx = 3, + .active_low = false, }, [CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST] = { - .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 1 + .reg = HHI_VID_DIVIDER_CNTL, + .bit_idx = 1, + .active_low = true, }, [CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE] = { - .reg = HHI_VID_DIVIDER_CNTL, .bit_idx = 0 + .reg = HHI_VID_DIVIDER_CNTL, + .bit_idx = 0, + .active_low = true, }, };
@@ -3547,22 +3580,22 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev, { struct meson8b_clk_reset *meson8b_clk_reset = container_of(rcdev, struct meson8b_clk_reset, reset); - unsigned long flags; const struct meson8b_clk_reset_line *reset; + unsigned int value = 0; + unsigned long flags;
if (id >= ARRAY_SIZE(meson8b_clk_reset_bits)) return -EINVAL;
reset = &meson8b_clk_reset_bits[id];
+ if (assert != reset->active_low) + value = BIT(reset->bit_idx); + spin_lock_irqsave(&meson_clk_lock, flags);
- if (assert) - regmap_update_bits(meson8b_clk_reset->regmap, reset->reg, - BIT(reset->bit_idx), BIT(reset->bit_idx)); - else - regmap_update_bits(meson8b_clk_reset->regmap, reset->reg, - BIT(reset->bit_idx), 0); + regmap_update_bits(meson8b_clk_reset->regmap, reset->reg, + BIT(reset->bit_idx), value);
spin_unlock_irqrestore(&meson_clk_lock, flags);
From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit 8bb629cfb28f4dad9d47f69249366e50ae5edc25 ]
The DIV{1,2,4,6,12}_EN bits are actually located in HHI_VID_CLK_CNTL register: - HHI_VID_CLK_CNTL[0] = DIV1_EN - HHI_VID_CLK_CNTL[1] = DIV2_EN - HHI_VID_CLK_CNTL[2] = DIV4_EN - HHI_VID_CLK_CNTL[3] = DIV6_EN - HHI_VID_CLK_CNTL[4] = DIV12_EN
Update the bits accordingly so we will enable the bits in the correct register once we switch these clocks to be mutable.
Fixes: 6cb57c678bb70e ("clk: meson: meson8b: add the read-only video clock trees") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Jerome Brunet jbrunet@baylibre.com Link: https://lore.kernel.org/r/20200417184127.1319871-4-martin.blumenstingl@googl... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/meson/meson8b.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 52337a100a90..4f9b79ed79d7 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -1207,7 +1207,7 @@ static struct clk_regmap meson8b_vclk_in_en = {
static struct clk_regmap meson8b_vclk_div1_gate = { .data = &(struct clk_regmap_gate_data){ - .offset = HHI_VID_CLK_DIV, + .offset = HHI_VID_CLK_CNTL, .bit_idx = 0, }, .hw.init = &(struct clk_init_data){ @@ -1237,7 +1237,7 @@ static struct clk_fixed_factor meson8b_vclk_div2_div = {
static struct clk_regmap meson8b_vclk_div2_div_gate = { .data = &(struct clk_regmap_gate_data){ - .offset = HHI_VID_CLK_DIV, + .offset = HHI_VID_CLK_CNTL, .bit_idx = 1, }, .hw.init = &(struct clk_init_data){ @@ -1267,7 +1267,7 @@ static struct clk_fixed_factor meson8b_vclk_div4_div = {
static struct clk_regmap meson8b_vclk_div4_div_gate = { .data = &(struct clk_regmap_gate_data){ - .offset = HHI_VID_CLK_DIV, + .offset = HHI_VID_CLK_CNTL, .bit_idx = 2, }, .hw.init = &(struct clk_init_data){ @@ -1297,7 +1297,7 @@ static struct clk_fixed_factor meson8b_vclk_div6_div = {
static struct clk_regmap meson8b_vclk_div6_div_gate = { .data = &(struct clk_regmap_gate_data){ - .offset = HHI_VID_CLK_DIV, + .offset = HHI_VID_CLK_CNTL, .bit_idx = 3, }, .hw.init = &(struct clk_init_data){ @@ -1327,7 +1327,7 @@ static struct clk_fixed_factor meson8b_vclk_div12_div = {
static struct clk_regmap meson8b_vclk_div12_div_gate = { .data = &(struct clk_regmap_gate_data){ - .offset = HHI_VID_CLK_DIV, + .offset = HHI_VID_CLK_CNTL, .bit_idx = 4, }, .hw.init = &(struct clk_init_data){
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit bcf41dc480b179bfb669a232080a2e26dc7294b4 ]
Some of the chips supported by the pca953x driver need the most significant bit in the address word set to automatically increment the address pointer on subsequent reads and writes (example: PCA9505). With this bit unset the same register is read multiple times on a multi-byte read sequence. Other chips must not have this bit set and autoincrement always (example: PCA9555).
Up to now this AI bit was interpreted to be part of the address, which resulted in inconsistent regmap caching when a register was written with AI set and then read without it. This happened for the PCA9505 in pca953x_gpio_set_multiple() where pca953x_read_regs() bulk read from the cache for registers 0x8-0xc and then wrote to registers 0x88-0x8c. (Side note: reading 5 values from offset 0x8 yiels OP0 5 times because AI must be set to get OP0-OP4, which is another bug that is resolved here as a by-product.) The same problem happens when calls to gpio_set_value() and gpio_set_array_value() were mixed.
With this patch the AI bit is always set for chips that support it. This works as there are no code locations that make use of the behaviour with AI unset (for the chips that support it).
Note that the call to pca953x_setup_gpio() had to be done a bit earlier to make the NBANK macro work.
The history of this bug is a bit complicated. Commit b32cecb46bdc ("gpio: pca953x: Extract the register address mangling to single function") changed which chips and functions are affected. Commit 3b00691cc46a ("gpio: pca953x: hack to fix 24 bit gpio expanders") used some duct tape to make the driver at least appear to work. Commit 49427232764d ("gpio: pca953x: Perform basic regmap conversion") introduced the caching. Commit b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") introduced the .set_multiple() callback which didn't work for chips that need the AI bit which was fixed later for some chips in 8958262af3fb ("gpio: pca953x: Repair multi-byte IO address increment on PCA9575"). So I'm sorry, I don't know which commit I should pick for a Fixes: line.
Tested-by: Marcel Gudert m.gudert@eckelmann.de Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Tested-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Bartosz Golaszewski bgolaszewski@baylibre.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-pca953x.c | 44 +++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 16 deletions(-)
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 3edc1762803a..29ba26742c8f 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -306,8 +306,22 @@ static const struct regmap_config pca953x_i2c_regmap = { .volatile_reg = pca953x_volatile_register,
.cache_type = REGCACHE_RBTREE, - /* REVISIT: should be 0x7f but some 24 bit chips use REG_ADDR_AI */ - .max_register = 0xff, + .max_register = 0x7f, +}; + +static const struct regmap_config pca953x_ai_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .read_flag_mask = REG_ADDR_AI, + .write_flag_mask = REG_ADDR_AI, + + .readable_reg = pca953x_readable_register, + .writeable_reg = pca953x_writeable_register, + .volatile_reg = pca953x_volatile_register, + + .cache_type = REGCACHE_RBTREE, + .max_register = 0x7f, };
static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off, @@ -318,18 +332,6 @@ static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off, int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1; u8 regaddr = pinctrl | addr | (off / BANK_SZ);
- /* Single byte read doesn't need AI bit set. */ - if (!addrinc) - return regaddr; - - /* Chips with 24 and more GPIOs always support Auto Increment */ - if (write && NBANK(chip) > 2) - regaddr |= REG_ADDR_AI; - - /* PCA9575 needs address-increment on multi-byte writes */ - if (PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) - regaddr |= REG_ADDR_AI; - return regaddr; }
@@ -897,6 +899,7 @@ static int pca953x_probe(struct i2c_client *client, int ret; u32 invert = 0; struct regulator *reg; + const struct regmap_config *regmap_config;
chip = devm_kzalloc(&client->dev, sizeof(struct pca953x_chip), GFP_KERNEL); @@ -960,7 +963,17 @@ static int pca953x_probe(struct i2c_client *client,
i2c_set_clientdata(client, chip);
- chip->regmap = devm_regmap_init_i2c(client, &pca953x_i2c_regmap); + pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK); + + if (NBANK(chip) > 2 || PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) { + dev_info(&client->dev, "using AI\n"); + regmap_config = &pca953x_ai_i2c_regmap; + } else { + dev_info(&client->dev, "using no AI\n"); + regmap_config = &pca953x_i2c_regmap; + } + + chip->regmap = devm_regmap_init_i2c(client, regmap_config); if (IS_ERR(chip->regmap)) { ret = PTR_ERR(chip->regmap); goto err_exit; @@ -991,7 +1004,6 @@ static int pca953x_probe(struct i2c_client *client, /* initialize cached registers from their original values. * we can't share this chip with another i2c master. */ - pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) { chip->regs = &pca953x_regs;
From: Sudip Mukherjee sudipm.mukherjee@gmail.com
[ Upstream commit 7440f518dad9d861d76c64956641eeddd3586f75 ]
On error the function ti_bandgap_get_sensor_data() returns the error code in ERR_PTR() but we only checked if the return value is NULL or not. And, so we can dereference an error code inside ERR_PTR. While at it, convert a check to IS_ERR_OR_NULL.
Signed-off-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Reviewed-by: Amit Kucheria amit.kucheria@linaro.org Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Link: https://lore.kernel.org/r/20200424161944.6044-1-sudipm.mukherjee@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index d3e959d01606..85776db4bf34 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -169,7 +169,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
data = ti_bandgap_get_sensor_data(bgp, id);
- if (!data || IS_ERR(data)) + if (!IS_ERR_OR_NULL(data)) data = ti_thermal_build_data(bgp, id);
if (!data) @@ -196,7 +196,7 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
data = ti_bandgap_get_sensor_data(bgp, id);
- if (data && data->ti_thermal) { + if (!IS_ERR_OR_NULL(data) && data->ti_thermal) { if (data->our_zone) thermal_zone_device_unregister(data->ti_thermal); } @@ -262,7 +262,7 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
data = ti_bandgap_get_sensor_data(bgp, id);
- if (data) { + if (!IS_ERR_OR_NULL(data)) { cpufreq_cooling_unregister(data->cool_dev); if (data->policy) cpufreq_cpu_put(data->policy);
From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit a29ae8600d50ece1856b062a39ed296b8b952259 ]
Not all u-boot versions initialize the HHI_GP_PLL_CNTL[2-5] registers. In that case all HHI_GPLL_PLL_CNTL[1-5] registers are 0x0 and when booting Linux the PLL fails to lock. The initialization sequence from u-boot is: - put the PLL into reset - write 0x59C88000 to HHI_GP_PLL_CNTL2 - write 0xCA463823 to HHI_GP_PLL_CNTL3 - write 0x0286A027 to HHI_GP_PLL_CNTL4 - write 0x00003000 to HHI_GP_PLL_CNTL5 - set M, N, OD and the enable bit - take the PLL out of reset - check if it has locked - disable the PLL
In Linux we already initialize M, N, OD, the enable and the reset bits. Also the HHI_GP_PLL_CNTL[2-5] registers with these magic values (the exact meaning is unknown) so the PLL can lock when the vendor u-boot did not initialize these registers yet.
Fixes: b882964b376f21 ("clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Jerome Brunet jbrunet@baylibre.com Link: https://lore.kernel.org/r/20200501215717.735393-1-martin.blumenstingl@google... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/meson/meson8b.c | 9 +++++++++ drivers/clk/meson/meson8b.h | 4 ++++ 2 files changed, 13 insertions(+)
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 4f9b79ed79d7..082178a0f41a 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -1910,6 +1910,13 @@ static struct clk_regmap meson8b_mali = { }, };
+static const struct reg_sequence meson8m2_gp_pll_init_regs[] = { + { .reg = HHI_GP_PLL_CNTL2, .def = 0x59c88000 }, + { .reg = HHI_GP_PLL_CNTL3, .def = 0xca463823 }, + { .reg = HHI_GP_PLL_CNTL4, .def = 0x0286a027 }, + { .reg = HHI_GP_PLL_CNTL5, .def = 0x00003000 }, +}; + static const struct pll_params_table meson8m2_gp_pll_params_table[] = { PLL_PARAMS(182, 3), { /* sentinel */ }, @@ -1943,6 +1950,8 @@ static struct clk_regmap meson8m2_gp_pll_dco = { .width = 1, }, .table = meson8m2_gp_pll_params_table, + .init_regs = meson8m2_gp_pll_init_regs, + .init_count = ARRAY_SIZE(meson8m2_gp_pll_init_regs), }, .hw.init = &(struct clk_init_data){ .name = "gp_pll_dco", diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h index c889fbeec30f..c91fb07fcb65 100644 --- a/drivers/clk/meson/meson8b.h +++ b/drivers/clk/meson/meson8b.h @@ -20,6 +20,10 @@ * [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf */ #define HHI_GP_PLL_CNTL 0x40 /* 0x10 offset in data sheet */ +#define HHI_GP_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */ +#define HHI_GP_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */ +#define HHI_GP_PLL_CNTL4 0x4C /* 0x13 offset in data sheet */ +#define HHI_GP_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */ #define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */ #define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */ #define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */
From: Yong Zhi yong.zhi@intel.com
[ Upstream commit 1a446873d7dd3a450f685928ce7f1907bde4583d ]
During S3 test, the following error was observed:
[ 726.174237] i2c_designware i2c_designware.0: platform_pm_resume+0x0/0x3d returned 0 after 0 usecs [ 726.184187] max98373 i2c-MX98373:00: calling max98373_resume+0x0/0x30 [snd_soc_max98373] @ 12698, parent: i2c-11 [ 726.195589] max98373 i2c-MX98373:00: Reset command failed. (ret:-16)
When calling regmap_update_bits(), since map->reg_update_bits is NULL, _regmap_read() is entered with the following logic:
if (!map->cache_bypass) { ret = regcache_read(map, reg, val); if (ret == 0) return 0; }
if (map->cache_only) return -EBUSY;
regcache_read() hits -EINVAL because MAX98373_R2000_SW_RESET is volatile, as map->cache_only is set by codec suspend, thus -EBUSY is returned. Fix by moving max98373_reset() after cache_only set to false in max98373_resume().
Signed-off-by: Yong Zhi yong.zhi@intel.com Link: https://lore.kernel.org/r/1588376661-29799-1-git-send-email-yong.zhi@intel.c... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/max98373.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index cae1def8902d..96718e3a1ad0 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -850,8 +850,8 @@ static int max98373_resume(struct device *dev) { struct max98373_priv *max98373 = dev_get_drvdata(dev);
- max98373_reset(max98373, dev); regcache_cache_only(max98373->regmap, false); + max98373_reset(max98373, dev); regcache_sync(max98373->regmap); return 0; }
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 8893ab5e8ee5d7c12e0fc1dca4a309475064473d ]
The error handling flow seems incorrect, there is no reason to try and add debugfs support if the device registration did not succeed. Return on error.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com Link: https://lore.kernel.org/r/20200419185117.4233-2-yung-chuan.liao@linux.intel.... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/slave.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c index 6473fa602f82..611f4f5bc36a 100644 --- a/drivers/soundwire/slave.c +++ b/drivers/soundwire/slave.c @@ -57,6 +57,8 @@ static int sdw_slave_add(struct sdw_bus *bus, list_del(&slave->node); mutex_unlock(&bus->bus_lock); put_device(&slave->dev); + + return ret; } sdw_slave_debugfs_init(slave);
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 0b66fb3e6b7a53688f8e20945ac78cd3d832c65f ]
Older compilers like gcc-4.8 don't see that the variable is initialized when it is used:
In file included from include/linux/compiler_types.h:68:0, from <command-line>:0: drivers/hid/intel-ish-hid/ishtp-fw-loader.c: In function 'load_fw_from_host': include/linux/compiler-gcc.h:75:45: warning: 'fw_info.ldr_capability.max_dma_buf_size' may be used uninitialized in this function [-Wmaybe-uninitialized] #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) ^ drivers/hid/intel-ish-hid/ishtp-fw-loader.c:770:22: note: 'fw_info.ldr_capability.max_dma_buf_size' was declared here struct shim_fw_info fw_info; ^
Make sure to initialize it before returning an error from ish_query_loader_prop().
Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver") Signed-off-by: Arnd Bergmann arnd@arndb.de Acked-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c index aa2dbed30fc3..6cf59fd26ad7 100644 --- a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c +++ b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c @@ -480,6 +480,7 @@ static int ish_query_loader_prop(struct ishtp_cl_data *client_data, sizeof(ldr_xfer_query_resp)); if (rv < 0) { client_data->flag_retry = true; + *fw_info = (struct shim_fw_info){}; return rv; }
@@ -489,6 +490,7 @@ static int ish_query_loader_prop(struct ishtp_cl_data *client_data, "data size %d is not equal to size of loader_xfer_query_response %zu\n", rv, sizeof(struct loader_xfer_query_response)); client_data->flag_retry = true; + *fw_info = (struct shim_fw_info){}; return -EMSGSIZE; }
From: Thinh Nguyen Thinh.Nguyen@synopsys.com
[ Upstream commit cb11ea56f37a36288cdd0a4799a983ee3aa437dd ]
DWC3 must not issue CLEAR_STALL command to control endpoints. The controller automatically clears the STALL when it receives the SETUP token. Also, when the driver receives ClearFeature(halt_ep), DWC3 must stop any active transfer from the endpoint and give back all the requests to the function drivers.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by: Thinh Nguyen thinhn@synopsys.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/gadget.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c30c5b1c478c..05180a09e70d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1505,6 +1505,10 @@ static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *r { int i;
+ /* If req->trb is not set, then the request has not started */ + if (!req->trb) + return; + /* * If request was already started, this means we had to * stop the transfer. With that we also need to ignore @@ -1595,6 +1599,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) { struct dwc3_gadget_ep_cmd_params params; struct dwc3 *dwc = dep->dwc; + struct dwc3_request *req; + struct dwc3_request *tmp; int ret;
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { @@ -1631,13 +1637,37 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) else dep->flags |= DWC3_EP_STALL; } else { + /* + * Don't issue CLEAR_STALL command to control endpoints. The + * controller automatically clears the STALL when it receives + * the SETUP token. + */ + if (dep->number <= 1) { + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + return 0; + }
ret = dwc3_send_clear_stall_ep_cmd(dep); - if (ret) + if (ret) { dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); - else - dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + return ret; + } + + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + + dwc3_stop_active_transfer(dep, true, true); + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(req); + + list_for_each_entry_safe(req, tmp, &dep->pending_list, list) + dwc3_gadget_move_cancelled_request(req); + + if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) { + dep->flags &= ~DWC3_EP_DELAY_START; + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + } }
return ret;
From: Thinh Nguyen Thinh.Nguyen@synopsys.com
[ Upstream commit 8d99087c2db863c5fa3a4a1f3cb82b3a493705ca ]
If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we should properly end an active transfer and give back all the started requests. However if it's for an isoc endpoint, the failure maybe due to bus-expiry status. In this case, don't give back the requests and wait for the next retry.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by: Thinh Nguyen thinhn@synopsys.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/gadget.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 05180a09e70d..17340864a540 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1217,6 +1217,8 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) } }
+static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep); + static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; @@ -1256,14 +1258,20 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); if (ret < 0) { - /* - * FIXME we need to iterate over the list of requests - * here and stop, unmap, free and del each of the linked - * requests instead of what we do now. - */ - if (req->trb) - memset(req->trb, 0, sizeof(struct dwc3_trb)); - dwc3_gadget_del_and_unmap_request(dep, req, ret); + struct dwc3_request *tmp; + + if (ret == -EAGAIN) + return ret; + + dwc3_stop_active_transfer(dep, true, true); + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(req); + + /* If ep isn't started, then there's no end transfer pending */ + if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + return ret; }
From: Oscar Carter oscar.carter@gmx.com
[ Upstream commit a4338ed2e1cf724563956ec5f91deeaabfedbe23 ]
Increase by one the size of wid_list array as index variable can reach a value of 5. If this happens, an out-of-bounds access is performed.
Also, use a #define instead of a hard-coded literal for the new array size.
Addresses-Coverity-ID: 1451981 ("Out-of-bounds access") Fixes: f5a3cb90b802d ("staging: wilc1000: add passive scan support") Acked-by: Ajay Singh ajay.kathat@microchip.com Signed-off-by: Oscar Carter oscar.carter@gmx.com Link: https://lore.kernel.org/r/20200504150911.4470-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/wilc1000/wilc_hif.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/wilc1000/wilc_hif.c b/drivers/staging/wilc1000/wilc_hif.c index 77d0732f451b..221e3d93db14 100644 --- a/drivers/staging/wilc1000/wilc_hif.c +++ b/drivers/staging/wilc1000/wilc_hif.c @@ -12,6 +12,8 @@ #define WILC_FALSE_FRMWR_CHANNEL 100 #define WILC_MAX_RATES_SUPPORTED 12
+#define WILC_SCAN_WID_LIST_SIZE 6 + struct wilc_rcvd_mac_info { u8 status; }; @@ -233,7 +235,7 @@ int wilc_scan(struct wilc_vif *vif, u8 scan_source, u8 scan_type, void *user_arg, struct cfg80211_scan_request *request) { int result = 0; - struct wid wid_list[5]; + struct wid wid_list[WILC_SCAN_WID_LIST_SIZE]; u32 index = 0; u32 i, scan_timeout; u8 *buffer;
From: Matej Dujava mdujava@kocurkovo.cz
[ Upstream commit fa90133377f4a7f15a937df6ad55133bb57c5665 ]
Switch statement does not contain all cases: 8, 16, 24, 32. This patch will add missing one (24)
Fixes: 81dee67e215b ("staging: sm750fb: add sm750 to staging") Signed-off-by: Matej Dujava mdujava@kocurkovo.cz Link: https://lore.kernel.org/r/1588277366-19354-2-git-send-email-mdujava@kocurkov... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/sm750fb/sm750.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c index 59568d18ce23..5b72aa81d94c 100644 --- a/drivers/staging/sm750fb/sm750.c +++ b/drivers/staging/sm750fb/sm750.c @@ -898,6 +898,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index) fix->visual = FB_VISUAL_PSEUDOCOLOR; break; case 16: + case 24: case 32: fix->visual = FB_VISUAL_TRUECOLOR; break;
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit bca718988b9008d0d5f504e2d318178fc84958c1 ]
If we fails somewhere in 'v3_pci_probe()', we need to free 'host'.
Use the managed version of 'pci_alloc_host_bridge()' to do that easily. The use of managed resources is already widely used in this driver.
Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.f... Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Acked-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-v3-semi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c index d219404bad92..9a86bb7448ac 100644 --- a/drivers/pci/controller/pci-v3-semi.c +++ b/drivers/pci/controller/pci-v3-semi.c @@ -743,7 +743,7 @@ static int v3_pci_probe(struct platform_device *pdev) int ret; LIST_HEAD(res);
- host = pci_alloc_host_bridge(sizeof(*v3)); + host = devm_pci_alloc_host_bridge(dev, sizeof(*v3)); if (!host) return -ENOMEM;
From: Russell King rmk+kernel@armlinux.org.uk
[ Upstream commit 88b73ee7ca4c90baf136ed5a8377fc5a9b73ac08 ]
The IRQ log output is supposed to appear on a single line. However, commit 3a2dc1677b60 ("i2c: pxa: Update debug function to dump more info on error") resulted in it being printed one-entry-per-line, which is excessively long.
Fixing this is not a trivial matter; using pr_cont() doesn't work as the previous dev_dbg() may not have been compiled in, or may be dynamic.
Since the rest of this function output is at error level, and is also debug output, promote this to error level as well to avoid this problem.
Reduce the number of always zero prefix digits to save screen real- estate.
Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-pxa.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index c9cbc9894bac..d0c557c8d80f 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -312,11 +312,10 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n", readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)), readl(_ISR(i2c))); - dev_dbg(dev, "log: "); + dev_err(dev, "log:"); for (i = 0; i < i2c->irqlogidx; i++) - pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); - - pr_debug("\n"); + pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]); + pr_cont("\n"); }
#else /* ifdef DEBUG */
From: John Stultz john.stultz@linaro.org
[ Upstream commit 8508f4cba308f785b2fd4b8c38849c117b407297 ]
Valentine reported seeing:
[ 3.626638] INFO: trying to register non-static key. [ 3.626639] the code is fine but needs lockdep annotation. [ 3.626640] turning off the locking correctness validator. [ 3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116 [ 3.626646] Hardware name: HiKey960 (DT) [ 3.626656] Workqueue: events deferred_probe_work_func [ 3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 3.640220] Call trace: [ 3.640225] dump_backtrace+0x0/0x1b8 [ 3.640227] show_stack+0x20/0x30 [ 3.640230] dump_stack+0xec/0x158 [ 3.640234] register_lock_class+0x598/0x5c0 [ 3.640235] __lock_acquire+0x80/0x16c0 [ 3.640236] lock_acquire+0xf4/0x4a0 [ 3.640241] _raw_spin_lock_irqsave+0x70/0xa8 [ 3.640245] uart_add_one_port+0x388/0x4b8 [ 3.640248] pl011_register_port+0x70/0xf0 [ 3.640250] pl011_probe+0x184/0x1b8 [ 3.640254] amba_probe+0xdc/0x180 [ 3.640256] really_probe+0xe0/0x338 [ 3.640257] driver_probe_device+0x60/0xf8 [ 3.640259] __device_attach_driver+0x8c/0xd0 [ 3.640260] bus_for_each_drv+0x84/0xd8 [ 3.640261] __device_attach+0xe4/0x140 [ 3.640263] device_initial_probe+0x1c/0x28 [ 3.640265] bus_probe_device+0xa4/0xb0 [ 3.640266] deferred_probe_work_func+0x7c/0xb8 [ 3.640269] process_one_work+0x2c0/0x768 [ 3.640271] worker_thread+0x4c/0x498 [ 3.640272] kthread+0x14c/0x158 [ 3.640275] ret_from_fork+0x10/0x1c
Which seems to be due to the fact that after allocating the uap structure, nothing initializes the spinlock.
Its a little confusing, as uart_port_spin_lock_init() is one place where the lock is supposed to be initialized, but it has an exception for the case where the port is a console.
This makes it seem like a deeper fix is needed to properly register the console, but I'm not sure what that entails, and Andy suggested that this approach is less invasive.
Thus, this patch resolves the issue by initializing the spinlock in the driver, and resolves the resulting warning.
Cc: Andy Shevchenko andy.shevchenko@gmail.com Cc: Russell King linux@armlinux.org.uk Cc: Jiri Slaby jslaby@suse.com Cc: linux-serial@vger.kernel.org Reported-by: Valentin Schneider valentin.schneider@arm.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: John Stultz john.stultz@linaro.org Reviewed-and-tested-by: Valentin Schneider valentin.schneider@arm.com Link: https://lore.kernel.org/r/20200428184050.6501-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/amba-pl011.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index b0b689546395..de3e8c24c03e 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2585,6 +2585,7 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, uap->port.fifosize = uap->fifosize; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = index; + spin_lock_init(&uap->port.lock);
amba_ports[index] = uap;
From: Kuppuswamy Sathyanarayanan sathyanarayanan.kuppuswamy@linux.intel.com
[ Upstream commit 388bcc6ecc609fca1b4920de7dc3806c98ec535e ]
If platform bus driver registration is failed then, accessing platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock) in __platform_driver_probe() without verifying the return value __platform_driver_register() can lead to NULL pointer exception.
So check the return value before attempting the spin lock.
One such example is below:
For a custom usecase, I have intentionally failed the platform bus registration and I expected all the platform device/driver registrations to fail gracefully. But I came across this panic issue.
[ 1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 1.331118] #PF: supervisor write access in kernel mode [ 1.331163] #PF: error_code(0x0002) - not-present page [ 1.331208] PGD 0 P4D 0 [ 1.331233] Oops: 0002 [#1] PREEMPT SMP [ 1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-00049-g670d35fb0144 #165 [ 1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30 [ 1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246 [ 1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001 [ 1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000 [ 1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001 [ 1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed [ 1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000 [ 1.331945] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 1.332008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0 [ 1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.332252] Call Trace: [ 1.332281] __platform_driver_probe+0x92/0xee [ 1.332323] ? rtc_dev_init+0x2b/0x2b [ 1.332358] cmos_init+0x37/0x67 [ 1.332396] do_one_initcall+0x7d/0x168 [ 1.332428] kernel_init_freeable+0x16c/0x1c9 [ 1.332473] ? rest_init+0xc0/0xc0 [ 1.332508] kernel_init+0x5/0x100 [ 1.332543] ret_from_fork+0x1f/0x30 [ 1.332579] CR2: 00000000000000c8 [ 1.332616] ---[ end trace 3bd87f12e9010b87 ]--- [ 1.333549] note: swapper/0[1] exited with preempt_count 1 [ 1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 1.333736] Kernel Offset: disabled
Note, this can only be triggered if a driver errors out from this call, which should never happen. If it does, the driver needs to be fixed.
Signed-off-by: Kuppuswamy Sathyanarayanan sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@l... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/platform.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 604a461848c9..0b67d41bab8f 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -802,6 +802,8 @@ int __init_or_module __platform_driver_probe(struct platform_driver *drv, /* temporary section violation during probe() */ drv->probe = probe; retval = code = __platform_driver_register(drv, module); + if (retval) + return retval;
/* * Fixup that section violation, being paranoid about code scanning
From: Andrew Murray andrew.murray@arm.com
[ Upstream commit 2b9f217433e31d125fb697ca7974d3de3ecc3e92 ]
The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between a CPU address (which is determined by the window number 'x') and a programmed PCI address - Thus allowing the controller to translate CPU accesses into PCI accesses.
However the existing code incorrectly writes the CPU address - lets fix this by writing the PCI address instead.
For memory transactions, existing DT users describe a 1:1 identity mapping and thus this change should have no effect. However the same isn't true for I/O.
Link: https://lore.kernel.org/r/20191004132941.6660-1-andrew.murray@arm.com Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") Tested-by: Marek Vasut marek.vasut+renesas@gmail.com Signed-off-by: Andrew Murray andrew.murray@arm.com Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Marek Vasut marek.vasut+renesas@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pcie-rcar.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c index 1ad0b56f11b4..04114352d0e7 100644 --- a/drivers/pci/controller/pcie-rcar.c +++ b/drivers/pci/controller/pcie-rcar.c @@ -335,11 +335,12 @@ static struct pci_ops rcar_pcie_ops = { };
static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie, - struct resource *res) + struct resource_entry *window) { /* Setup PCIe address space mappings for each resource */ resource_size_t size; resource_size_t res_start; + struct resource *res = window->res; u32 mask;
rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win)); @@ -353,9 +354,9 @@ static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie, rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win));
if (res->flags & IORESOURCE_IO) - res_start = pci_pio_to_address(res->start); + res_start = pci_pio_to_address(res->start) - window->offset; else - res_start = res->start; + res_start = res->start - window->offset;
rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPAUR(win)); rcar_pci_write_reg(pcie, lower_32_bits(res_start) & ~0x7F, @@ -384,7 +385,7 @@ static int rcar_pcie_setup(struct list_head *resource, struct rcar_pcie *pci) switch (resource_type(res)) { case IORESOURCE_IO: case IORESOURCE_MEM: - rcar_pcie_setup_window(i, pci, res); + rcar_pcie_setup_window(i, pci, win); i++; break; case IORESOURCE_BUS:
From: Kai-Heng Feng kai.heng.feng@canonical.com
[ Upstream commit 66ff14e59e8a30690755b08bc3042359703fb07a ]
7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for Linux to enable ASPM, but for some undocumented reason, it didn't enable ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge.
Remove this exclusion so we can enable ASPM on these links.
The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001 PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the Intel SoC to enter deeper Package C-states, which is a significant power savings.
[bhelgaas: commit log] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571 Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pcie/aspm.c | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5a1bbf2cb7e9..4a0ec34062d6 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -628,16 +628,6 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
/* Setup initial capable state. Will be updated later */ link->aspm_capable = link->aspm_support; - /* - * If the downstream component has pci bridge function, don't - * do ASPM for now. - */ - list_for_each_entry(child, &linkbus->devices, bus_list) { - if (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE) { - link->aspm_disable = ASPM_STATE_ALL; - break; - } - }
/* Get and check endpoint acceptable latencies */ list_for_each_entry(child, &linkbus->devices, bus_list) {
From: Viacheslav Dubeyko v.dubeiko@yadro.com
[ Upstream commit f839544ccff60cbe534282aac68858fc3fb278ca ]
Currently, FC target reset finishes with the warning message:
[84010.596893] ------------[ cut here ]------------ [84010.596917] WARNING: CPU: 238 PID: 279973 at ../drivers/scsi/qla2xxx/qla_target.c:6644 qlt_enable_vha+0x1d0/0x260 [qla2xxx] [84010.596918] Modules linked in: vrf af_packet 8021q garp mrp stp llc netlink_diag target_tatlin_tblock(OEX) dm_ec(OEX) ttln_rdma(OEX) dm_frontend(OEX) nvme_rdma nvmet tcm_qla2xxx iscsi_target_mod target_core_mod at24 nvmem_core pnv_php ipmi_watchdog ipmi_ssif vmx_crypto gf128mul crct10dif_vpmsum qla2xxx rpcrdma nvme_fc powernv_flash(X) nvme_fabrics uio_pdrv_genirq mtd rtc_opal(X) ibmpowernv(X) opal_prd(X) uio scsi_transport_fc i2c_opal(X) ses enclosure ipmi_poweroff ast i2c_algo_bit ttm bmc_mcu(OEX) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks agpgart nfsd auth_rpcgss nfs_acl ipmi_powernv(X) lockd ipmi_devintf ipmi_msghandler grace dummy ext4 crc16 jbd2 mbcache sd_mod rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm [84010.596975] configfs mlx5_ib ib_uverbs ib_core mlx5_core crc32c_vpmsum xhci_pci xhci_hcd mpt3sas(OEX) tg3 usbcore mlxfw tls raid_class libphy scsi_transport_sas devlink ptp pps_core nvme nvme_core sunrpc dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 [84010.597001] Supported: Yes, External [84010.597004] CPU: 238 PID: 279973 Comm: bash Tainted: G OE 4.12.14-197.29-default #1 SLE15-SP1 [84010.597006] task: c000000a104c0000 task.stack: c000000b52188000 [84010.597007] NIP: d00000001ffd7f78 LR: d00000001ffd7f6c CTR: c0000000001676c0 [84010.597008] REGS: c000000b5218b910 TRAP: 0700 Tainted: G OE (4.12.14-197.29-default) [84010.597008] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> [84010.597015] CR: 48242424 XER: 00000000 [84010.597016] CFAR: d00000001ff45d08 SOFTE: 1 GPR00: d00000001ffd7f6c c000000b5218bb90 d00000002001b228 0000000000000102 GPR04: 0000000000000001 0000000000000001 00013d91ed0a5e2d 0000000000000000 GPR08: c000000007793300 0000000000000000 0000000000000000 c000000a086e7818 GPR12: 0000000000002200 c000000007793300 0000000000000000 000000012bc937c0 GPR16: 000000012bbf7ed0 0000000000000000 000000012bc3dd10 0000000000000000 GPR20: 000000012bc4db28 0000010036442810 000000012bc97828 000000012bc96c70 GPR24: 00000100365b1550 0000000000000000 00000100363f3d80 c000000be20d3080 GPR28: c000000bda7eae00 c000000be20db7e8 c000000be20d3778 c000000be20db7e8 [84010.597042] NIP [d00000001ffd7f78] qlt_enable_vha+0x1d0/0x260 [qla2xxx] [84010.597051] LR [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] [84010.597051] Call Trace: [84010.597061] [c000000b5218bb90] [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] (unreliable) [84010.597064] [c000000b5218bc20] [d000000009820b6c] tcm_qla2xxx_tpg_enable_store+0xc4/0x130 [tcm_qla2xxx] [84010.597067] [c000000b5218bcb0] [d0000000185d0e68] configfs_write_file+0xd0/0x190 [configfs] [84010.597072] [c000000b5218bd00] [c0000000003d0edc] __vfs_write+0x3c/0x1e0 [84010.597074] [c000000b5218bd90] [c0000000003d2ea8] vfs_write+0xd8/0x220 [84010.597076] [c000000b5218bde0] [c0000000003d4ddc] SyS_write+0x6c/0x110 [84010.597079] [c000000b5218be30] [c00000000000b188] system_call+0x3c/0x130 [84010.597080] Instruction dump: [84010.597082] 7d0050a8 7d084b78 7d0051ad 40c2fff4 7fa3eb78 4bf73965 60000000 7fa3eb78 [84010.597086] 4bf6dcd9 60000000 2fa30000 419eff40 <0fe00000> 4bffff38 e95f0058 a12a0180 [84010.597090] ---[ end trace e32abaf6e6fee826 ]---
To reproduce:
echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod modprobe tcm_qla2xxx mkdir /sys/kernel/config/target/qla2xxx mkdir /sys/kernel/config/target/qla2xxx/<port-name> mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
SYSTEM START kernel: pid 327:drivers/scsi/qla2xxx/qla_init.c:2174 qla2x00_initialize_adapter(): vha->flags.online 0x0 <...> kernel: pid 327:drivers/scsi/qla2xxx/qla_os.c:3444 qla2x00_probe_one(): vha->flags.online 0x1
echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...> kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6998 qla2x00_restart_isp(): vha->flags.online 0x0
echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...> kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0
echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0 kernel: -----------[ cut here ]----------- kernel: WARNING: CPU: 1 PID: 1404 at drivers/scsi/qla2xxx/qla_target.c:6654 qlt_enable_vha+0x1e0/0x280 [qla2xxx]
The issue happens because no real ISP reset is executed. The qla2x00_abort_isp(scsi_qla_host_t *vha) function expects that vha->flags.online will be not zero for ISP reset procedure. This patch sets vha->flags.online to 1 before calling ->abort_isp() for starting the ISP reset.
Link: https://lore.kernel.org/r/1d7b21bf9f7676643239eb3d60eaca7cfa505cf0.camel@yad... Reviewed-by: Roman Bolshakov r.bolshakov@yadro.com Signed-off-by: Viacheslav Dubeyko v.dubeiko@yadro.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_os.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 03d272a09e26..d7ec4083a091 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -6295,6 +6295,7 @@ qla2x00_do_dpc(void *data)
if (do_reset && !(test_and_set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags))) { + base_vha->flags.online = 1; ql_dbg(ql_dbg_dpc, base_vha, 0x4007, "ISP abort scheduled.\n"); if (ha->isp_ops->abort_isp(base_vha)) {
From: Takashi Sakamoto o-takashi@sakamocchi.jp
[ Upstream commit 8304cf77c92038cd1c50c27b69d30be695cc8003 ]
Although the value of FDF is used just for outgoing stream, the assignment to union member is done for both directions of stream. At present this causes no issue because the value of same position is reassigned later for opposite stream. However, it's better to add if statement.
Fixes: d3d10a4a1b19 ("ALSA: firewire-lib: use union for directional parameters") Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp Link: https://lore.kernel.org/r/20200508043635.349339-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/firewire/amdtp-am824.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/firewire/amdtp-am824.c b/sound/firewire/amdtp-am824.c index 67d735e9a6a4..fea92e148790 100644 --- a/sound/firewire/amdtp-am824.c +++ b/sound/firewire/amdtp-am824.c @@ -82,7 +82,8 @@ int amdtp_am824_set_parameters(struct amdtp_stream *s, unsigned int rate, if (err < 0) return err;
- s->ctx_data.rx.fdf = AMDTP_FDF_AM824 | s->sfc; + if (s->direction == AMDTP_OUT_STREAM) + s->ctx_data.rx.fdf = AMDTP_FDF_AM824 | s->sfc;
p->pcm_channels = pcm_channels; p->midi_ports = midi_ports;
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 934ed3847a4ebc75b655659c4d2349ba4337941c ]
In the probe function, in case of error, resources allocated in 'lp8788_setup_adc_channel()' must be released.
This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function and to axe the 'lp8788_release_adc_channel()' function which is now useless.
Fixes: 98a276649358 ("power_supply: Add new lp8788 charger driver") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/lp8788-charger.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-)
diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c index 84a206f42a8e..e7931ffb7151 100644 --- a/drivers/power/supply/lp8788-charger.c +++ b/drivers/power/supply/lp8788-charger.c @@ -572,27 +572,14 @@ static void lp8788_setup_adc_channel(struct device *dev, return;
/* ADC channel for battery voltage */ - chan = iio_channel_get(dev, pdata->adc_vbatt); + chan = devm_iio_channel_get(dev, pdata->adc_vbatt); pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan;
/* ADC channel for battery temperature */ - chan = iio_channel_get(dev, pdata->adc_batt_temp); + chan = devm_iio_channel_get(dev, pdata->adc_batt_temp); pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan; }
-static void lp8788_release_adc_channel(struct lp8788_charger *pchg) -{ - int i; - - for (i = 0; i < LP8788_NUM_CHG_ADC; i++) { - if (!pchg->chan[i]) - continue; - - iio_channel_release(pchg->chan[i]); - pchg->chan[i] = NULL; - } -} - static ssize_t lp8788_show_charger_status(struct device *dev, struct device_attribute *attr, char *buf) { @@ -735,7 +722,6 @@ static int lp8788_charger_remove(struct platform_device *pdev) flush_work(&pchg->charger_work); lp8788_irq_unregister(pdev, pchg); lp8788_psy_unregister(pchg); - lp8788_release_adc_channel(pchg);
return 0; }
From: Dmitry Osipenko digetx@gmail.com
[ Upstream commit c32ea07a30630ace950e07ffe7a18bdcc25898e1 ]
Fix failure when USB cable is connected: smb347 2-006a: reading IRQSTAT_D failed
Fixes: 1502cfe19bac ("smb347-charger: Fix battery status reporting logic for charger faults")
Tested-by: David Heidelberg david@ixit.cz Signed-off-by: Dmitry Osipenko digetx@gmail.com Signed-off-by: David Heidelberg david@ixit.cz Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/power/supply/smb347-charger.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c index c1d124b8be0c..d102921b3ab2 100644 --- a/drivers/power/supply/smb347-charger.c +++ b/drivers/power/supply/smb347-charger.c @@ -1138,6 +1138,7 @@ static bool smb347_volatile_reg(struct device *dev, unsigned int reg) switch (reg) { case IRQSTAT_A: case IRQSTAT_C: + case IRQSTAT_D: case IRQSTAT_E: case IRQSTAT_F: case STAT_A:
From: Wei Yongjun weiyongjun1@huawei.com
[ Upstream commit 7d8785bc7adbb4dc5ba8ee06994107637848ded8 ]
Fix to return negative error code -ENOMEM from the IPC init error handling case instead of 0, as done elsewhere in this function.
Fixes: c16211d6226d ("ASoC: SOF: Add Sound Open Firmware driver core") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Wei Yongjun weiyongjun1@huawei.com Link: https://lore.kernel.org/r/20200509093337.78897-1-weiyongjun1@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c index 12aec140819a..2a6b84d2781e 100644 --- a/sound/soc/sof/core.c +++ b/sound/soc/sof/core.c @@ -372,6 +372,7 @@ static int sof_probe_continue(struct snd_sof_dev *sdev) /* init the IPC */ sdev->ipc = snd_sof_ipc_init(sdev); if (!sdev->ipc) { + ret = -ENOMEM; dev_err(sdev->dev, "error: failed to init DSP IPC %d\n", ret); goto ipc_err; }
From: Loic Poulain loic.poulain@linaro.org
[ Upstream commit 4a4a26317ec8aba575f6b85789a42639937bc1a4 ]
Each IRQ_TYPE_NONE interrupt causes a warning at boot. Fix that by defining an appropriate type.
Fixes: e0531312e78f ("arm64: dts: qcom: msm8996: Add CAMSS support") Signed-off-by: Loic Poulain loic.poulain@linaro.org Link: https://lore.kernel.org/r/1587470425-13726-1-git-send-email-loic.poulain@lin... Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index fbb8ce78f95b..d303df3887d9 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1681,16 +1681,16 @@ camss: camss@a00000 { "csi_clk_mux", "vfe0", "vfe1"; - interrupts = <GIC_SPI 78 0>, - <GIC_SPI 79 0>, - <GIC_SPI 80 0>, - <GIC_SPI 296 0>, - <GIC_SPI 297 0>, - <GIC_SPI 298 0>, - <GIC_SPI 299 0>, - <GIC_SPI 309 0>, - <GIC_SPI 314 0>, - <GIC_SPI 315 0>; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; interrupt-names = "csiphy0", "csiphy1", "csiphy2",
From: Bodo Stroesser bstroesser@ts.fujitsu.com
[ Upstream commit c68a56736c129f5dd1632856956f9c3e04bae200 ]
We use tcm_loop with tape emulations running on tcmu.
In case application reads a short tape block with a longer READ, or a long tape block with a short READ, according to SCC spec data has to be tranferred _and_ sensebytes with ILI set and information field containing the residual count. Similar problem also exists when using fixed block size in READ.
Up to now tcm_loop is not prepared to handle sensebytes if input data is provided, as in tcm_loop_queue_data_in() it only sets SAM_STAT_GOOD and, if necessary, the residual count.
To fix the bug, the same handling for sensebytes as present in tcm_loop_queue_status() must be done in tcm_loop_queue_data_in() also.
After adding this handling, the two function now are nearly identical, so I created a single function with two wrappers.
Link: https://lore.kernel.org/r/20200428182617.32726-1-bstroesser@ts.fujitsu.com Signed-off-by: Bodo Stroesser bstroesser@ts.fujitsu.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/loopback/tcm_loop.c | 36 +++++++++++++----------------- 1 file changed, 15 insertions(+), 21 deletions(-)
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 3305b47fdf53..16d5a4e117a2 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -545,32 +545,15 @@ static int tcm_loop_write_pending(struct se_cmd *se_cmd) return 0; }
-static int tcm_loop_queue_data_in(struct se_cmd *se_cmd) +static int tcm_loop_queue_data_or_status(const char *func, + struct se_cmd *se_cmd, u8 scsi_status) { struct tcm_loop_cmd *tl_cmd = container_of(se_cmd, struct tcm_loop_cmd, tl_se_cmd); struct scsi_cmnd *sc = tl_cmd->sc;
pr_debug("%s() called for scsi_cmnd: %p cdb: 0x%02x\n", - __func__, sc, sc->cmnd[0]); - - sc->result = SAM_STAT_GOOD; - set_host_byte(sc, DID_OK); - if ((se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT) || - (se_cmd->se_cmd_flags & SCF_UNDERFLOW_BIT)) - scsi_set_resid(sc, se_cmd->residual_count); - sc->scsi_done(sc); - return 0; -} - -static int tcm_loop_queue_status(struct se_cmd *se_cmd) -{ - struct tcm_loop_cmd *tl_cmd = container_of(se_cmd, - struct tcm_loop_cmd, tl_se_cmd); - struct scsi_cmnd *sc = tl_cmd->sc; - - pr_debug("%s() called for scsi_cmnd: %p cdb: 0x%02x\n", - __func__, sc, sc->cmnd[0]); + func, sc, sc->cmnd[0]);
if (se_cmd->sense_buffer && ((se_cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) || @@ -581,7 +564,7 @@ static int tcm_loop_queue_status(struct se_cmd *se_cmd) sc->result = SAM_STAT_CHECK_CONDITION; set_driver_byte(sc, DRIVER_SENSE); } else - sc->result = se_cmd->scsi_status; + sc->result = scsi_status;
set_host_byte(sc, DID_OK); if ((se_cmd->se_cmd_flags & SCF_OVERFLOW_BIT) || @@ -591,6 +574,17 @@ static int tcm_loop_queue_status(struct se_cmd *se_cmd) return 0; }
+static int tcm_loop_queue_data_in(struct se_cmd *se_cmd) +{ + return tcm_loop_queue_data_or_status(__func__, se_cmd, SAM_STAT_GOOD); +} + +static int tcm_loop_queue_status(struct se_cmd *se_cmd) +{ + return tcm_loop_queue_data_or_status(__func__, + se_cmd, se_cmd->scsi_status); +} + static void tcm_loop_queue_tm_rsp(struct se_cmd *se_cmd) { struct tcm_loop_cmd *tl_cmd = container_of(se_cmd,
From: Suganath Prabu S suganath-prabu.subramani@broadcom.com
[ Upstream commit cbbfdb2a2416c9f0cde913cf09670097ac281282 ]
Fix following warning from Smatch static analyser:
drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->hpr_lookup' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->internal_lookup' double freed
Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@br... Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Suganath Prabu S suganath-prabu.subramani@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 752b71cfbe12..7fd1d731555f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4777,7 +4777,9 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) }
kfree(ioc->hpr_lookup); + ioc->hpr_lookup = NULL; kfree(ioc->internal_lookup); + ioc->internal_lookup = NULL; if (ioc->chain_lookup) { for (i = 0; i < ioc->scsiio_depth; i++) { for (j = ioc->chains_per_prp_buffer;
From: Yongbo Zhang giraffesnn123@gmail.com
[ Upstream commit 66c705d07d784fb6b4622c6e47b6acae357472db ]
SSI BUSIF buffer is possible to overflow or underflow, especially in a hypervisor environment. If there is no interrupt support, it will eventually lead to errors in pcm data. This patch adds overflow and underflow interrupt support for SSI BUSIF buffer.
Reported-by: Chen Li licheng0822@thundersoft.com Signed-off-by: Yongbo Zhang giraffesnn123@gmail.com Tested-by: Chen Li licheng0822@thundersoft.com Acked-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20200512093003.28332-1-giraffesnn123@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rcar/gen.c | 8 +++ sound/soc/sh/rcar/rsnd.h | 9 +++ sound/soc/sh/rcar/ssi.c | 145 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 162 insertions(+)
diff --git a/sound/soc/sh/rcar/gen.c b/sound/soc/sh/rcar/gen.c index af19010b9d88..8bd49c8a9517 100644 --- a/sound/soc/sh/rcar/gen.c +++ b/sound/soc/sh/rcar/gen.c @@ -224,6 +224,14 @@ static int rsnd_gen2_probe(struct rsnd_priv *priv) RSND_GEN_S_REG(SSI_SYS_STATUS5, 0x884), RSND_GEN_S_REG(SSI_SYS_STATUS6, 0x888), RSND_GEN_S_REG(SSI_SYS_STATUS7, 0x88c), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE0, 0x850), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE1, 0x854), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE2, 0x858), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE3, 0x85c), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE4, 0x890), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE5, 0x894), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE6, 0x898), + RSND_GEN_S_REG(SSI_SYS_INT_ENABLE7, 0x89c), RSND_GEN_S_REG(HDMI0_SEL, 0x9e0), RSND_GEN_S_REG(HDMI1_SEL, 0x9e4),
diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index ea6cbaa9743e..d47608ff5fac 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -189,6 +189,14 @@ enum rsnd_reg { SSI_SYS_STATUS5, SSI_SYS_STATUS6, SSI_SYS_STATUS7, + SSI_SYS_INT_ENABLE0, + SSI_SYS_INT_ENABLE1, + SSI_SYS_INT_ENABLE2, + SSI_SYS_INT_ENABLE3, + SSI_SYS_INT_ENABLE4, + SSI_SYS_INT_ENABLE5, + SSI_SYS_INT_ENABLE6, + SSI_SYS_INT_ENABLE7, HDMI0_SEL, HDMI1_SEL, SSI9_BUSIF0_MODE, @@ -237,6 +245,7 @@ enum rsnd_reg { #define SSI9_BUSIF_ADINR(i) (SSI9_BUSIF0_ADINR + (i)) #define SSI9_BUSIF_DALIGN(i) (SSI9_BUSIF0_DALIGN + (i)) #define SSI_SYS_STATUS(i) (SSI_SYS_STATUS0 + (i)) +#define SSI_SYS_INT_ENABLE(i) (SSI_SYS_INT_ENABLE0 + (i))
struct rsnd_priv; diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 4a7d3413917f..47d5ddb526f2 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -372,6 +372,9 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, u32 wsr = ssi->wsr; int width; int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + int i; + u32 sys_int_enable = 0;
is_tdm = rsnd_runtime_is_tdm(io); is_tdm_split = rsnd_runtime_is_tdm_split(io); @@ -447,6 +450,38 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, cr_mode = DIEN; /* PIO : enable Data interrupt */ }
+ /* enable busif buffer over/under run interrupt. */ + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE(i * 2)); + sys_int_enable |= 0xf << (id * 4); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE(i * 2), + sys_int_enable); + } + + break; + case 9: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1)); + sys_int_enable |= 0xf << 4; + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1), + sys_int_enable); + } + + break; + } + } + init_end: ssi->cr_own = cr_own; ssi->cr_mode = cr_mode; @@ -496,6 +531,13 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); struct device *dev = rsnd_priv_to_dev(priv); + int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + int i; + u32 sys_int_enable = 0; + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io);
if (!rsnd_ssi_is_run_mods(mod, io)) return 0; @@ -517,6 +559,38 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, ssi->wsr = 0; }
+ /* disable busif buffer over/under run interrupt. */ + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE(i * 2)); + sys_int_enable &= ~(0xf << (id * 4)); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE(i * 2), + sys_int_enable); + } + + break; + case 9: + for (i = 0; i < 4; i++) { + sys_int_enable = rsnd_mod_read(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1)); + sys_int_enable &= ~(0xf << 4); + rsnd_mod_write(mod, + SSI_SYS_INT_ENABLE((i * 2) + 1), + sys_int_enable); + } + + break; + } + } + return 0; }
@@ -622,6 +696,11 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, int enable) { u32 val = 0; + int is_tdm, is_tdm_split; + int id = rsnd_mod_id(mod); + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io);
if (rsnd_is_gen1(priv)) return 0; @@ -635,6 +714,19 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, if (enable) val = rsnd_ssi_is_dma_mode(mod) ? 0x0e000000 : 0x0f000000;
+ if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 9: + val |= 0x0000ff00; + break; + } + } + rsnd_mod_write(mod, SSI_INT_ENABLE, val);
return 0; @@ -651,6 +743,12 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, u32 status; bool elapsed = false; bool stop = false; + int id = rsnd_mod_id(mod); + int i; + int is_tdm, is_tdm_split; + + is_tdm = rsnd_runtime_is_tdm(io); + is_tdm_split = rsnd_runtime_is_tdm_split(io);
spin_lock(&priv->lock);
@@ -672,6 +770,53 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod, stop = true; }
+ status = 0; + + if (is_tdm || is_tdm_split) { + switch (id) { + case 0: + case 1: + case 2: + case 3: + case 4: + for (i = 0; i < 4; i++) { + status = rsnd_mod_read(mod, + SSI_SYS_STATUS(i * 2)); + status &= 0xf << (id * 4); + + if (status) { + rsnd_dbg_irq_status(dev, + "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); + rsnd_mod_write(mod, + SSI_SYS_STATUS(i * 2), + 0xf << (id * 4)); + stop = true; + break; + } + } + break; + case 9: + for (i = 0; i < 4; i++) { + status = rsnd_mod_read(mod, + SSI_SYS_STATUS((i * 2) + 1)); + status &= 0xf << 4; + + if (status) { + rsnd_dbg_irq_status(dev, + "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); + rsnd_mod_write(mod, + SSI_SYS_STATUS((i * 2) + 1), + 0xf << 4); + stop = true; + break; + } + } + break; + } + } + rsnd_ssi_status_clear(mod); rsnd_ssi_interrupt_out: spin_unlock(&priv->lock);
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 4e8748fcaeec073e3ba794871ce86c545e4f961f ]
There are 2 issues here: - if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()' is a no-op because the 'mop500_dai_links' structure has not been initialized yet, so the referenced are not decremented - The reference stored in 'mop500_dai_links[i].codecs' is refcounted only once in the probe and must be decremented only once.
Fixes: 39013bd60e79 ("ASoC: Ux500: Dispose of device nodes correctly") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/20200512100705.246349-1-christophe.jaillet@wanadoo... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/ux500/mop500.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/sound/soc/ux500/mop500.c b/sound/soc/ux500/mop500.c index 2873e8e6f02b..cdae1190b930 100644 --- a/sound/soc/ux500/mop500.c +++ b/sound/soc/ux500/mop500.c @@ -63,10 +63,11 @@ static void mop500_of_node_put(void) { int i;
- for (i = 0; i < 2; i++) { + for (i = 0; i < 2; i++) of_node_put(mop500_dai_links[i].cpus->of_node); - of_node_put(mop500_dai_links[i].codecs->of_node); - } + + /* Both links use the same codec, which is refcounted only once */ + of_node_put(mop500_dai_links[0].codecs->of_node); }
static int mop500_of_probe(struct platform_device *pdev, @@ -81,7 +82,9 @@ static int mop500_of_probe(struct platform_device *pdev,
if (!(msp_np[0] && msp_np[1] && codec_np)) { dev_err(&pdev->dev, "Phandle missing or invalid\n"); - mop500_of_node_put(); + for (i = 0; i < 2; i++) + of_node_put(msp_np[i]); + of_node_put(codec_np); return -EINVAL; }
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 03990fd58d2b7c8f7d53e514ba9b8749fac260f9 ]
If an error occurs after the call to 'omap_mcbsp_init()', the reference to 'mcbsp->fclk' must be decremented, as already done in the remove function.
This can be achieved easily by using the devm_ variant of 'clk_get()' when the reference is taken in 'omap_mcbsp_init()'
This fixes the leak in the probe and has the side effect to simplify both the error handling path of 'omap_mcbsp_init()' and the remove function.
Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Acked-by: Peter Ujfalusi peter.ujflausi@ti.com Link: https://lore.kernel.org/r/20200512134325.252073-1-christophe.jaillet@wanadoo... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/ti/omap-mcbsp.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/sound/soc/ti/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c index 26b503bbdb5f..3273b317fa3b 100644 --- a/sound/soc/ti/omap-mcbsp.c +++ b/sound/soc/ti/omap-mcbsp.c @@ -686,7 +686,7 @@ static int omap_mcbsp_init(struct platform_device *pdev) mcbsp->dma_data[1].addr = omap_mcbsp_dma_reg_params(mcbsp, SNDRV_PCM_STREAM_CAPTURE);
- mcbsp->fclk = clk_get(&pdev->dev, "fck"); + mcbsp->fclk = devm_clk_get(&pdev->dev, "fck"); if (IS_ERR(mcbsp->fclk)) { ret = PTR_ERR(mcbsp->fclk); dev_err(mcbsp->dev, "unable to get fck: %d\n", ret); @@ -711,7 +711,7 @@ static int omap_mcbsp_init(struct platform_device *pdev) if (ret) { dev_err(mcbsp->dev, "Unable to create additional controls\n"); - goto err_thres; + return ret; } }
@@ -724,8 +724,6 @@ static int omap_mcbsp_init(struct platform_device *pdev) err_st: if (mcbsp->pdata->buffer_size) sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group); -err_thres: - clk_put(mcbsp->fclk); return ret; }
@@ -1442,8 +1440,6 @@ static int asoc_mcbsp_remove(struct platform_device *pdev)
omap_mcbsp_st_cleanup(pdev);
- clk_put(mcbsp->fclk); - return 0; }
From: Dafna Hirschfeld dafna.hirschfeld@collabora.com
[ Upstream commit d7faa8ffb6be57bf8233a4b5a636d76b83c51ce7 ]
In function rockchip_dt_node_to_map, a new_map variable is allocated by:
new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map), GFP_KERNEL);
This uses devres and attaches new_map to the pinctrl driver. This cause a leak since new_map is not released when the probed driver is removed. Fix it by using kcalloc to allocate new_map and free it in `rockchip_dt_free_map`
Signed-off-by: Dafna Hirschfeld dafna.hirschfeld@collabora.com Reviewed-by: Heiko Stuebner heiko@sntech.de Link: https://lore.kernel.org/r/20200506100903.15420-1-dafna.hirschfeld@collabora.... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-rockchip.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index dc0bbf198cbc..1bd8840e11a6 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -506,8 +506,8 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev, }
map_num += grp->npins; - new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map), - GFP_KERNEL); + + new_map = kcalloc(map_num, sizeof(*new_map), GFP_KERNEL); if (!new_map) return -ENOMEM;
@@ -517,7 +517,7 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev, /* create mux map */ parent = of_get_parent(np); if (!parent) { - devm_kfree(pctldev->dev, new_map); + kfree(new_map); return -EINVAL; } new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; @@ -544,6 +544,7 @@ static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev, static void rockchip_dt_free_map(struct pinctrl_dev *pctldev, struct pinctrl_map *map, unsigned num_maps) { + kfree(map); }
static const struct pinctrl_ops rockchip_pctrl_ops = {
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit fe204591cc9480347af7d2d6029b24a62e449486 ]
Building a kernel with clang sometimes fails with an objtool error in dlm:
fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc
The problem is that BUG() never returns and the compiler knows that anything after it is unreachable, however the panic still emits some code that does not get fully eliminated.
Having both BUG() and panic() is really pointless as the BUG() kills the current process and the subsequent panic() never hits. In most cases, we probably don't really want either and should replace the DLM_ASSERT() statements with WARN_ON(), as has been done for some of them.
Remove the BUG() here so the user at least sees the panic message and we can reliably build randconfig kernels.
Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM") Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: clang-built-linux@googlegroups.com Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: David Teigland teigland@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/dlm/dlm_internal.h | 1 - 1 file changed, 1 deletion(-)
diff --git a/fs/dlm/dlm_internal.h b/fs/dlm/dlm_internal.h index 416d9de35679..4311d01b02a8 100644 --- a/fs/dlm/dlm_internal.h +++ b/fs/dlm/dlm_internal.h @@ -97,7 +97,6 @@ do { \ __LINE__, __FILE__, #x, jiffies); \ {do} \ printk("\n"); \ - BUG(); \ panic("DLM: Record message above and reboot.\n"); \ } \ }
From: Wei Yongjun weiyongjun1@huawei.com
[ Upstream commit b919e077cccfbb77beb98809568b2fb0b4d113ec ]
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function.
Fixes: 7d9e6f5aebe8 ("usb: host: ohci-sm501: init genalloc for local memory") Signed-off-by: Wei Yongjun weiyongjun1@huawei.com Acked-by: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/20200506135625.106910-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/ohci-sm501.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index c158cda9e4b9..cff965240327 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -157,9 +157,10 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev) * the call to usb_hcd_setup_local_mem() below does just that. */
- if (usb_hcd_setup_local_mem(hcd, mem->start, - mem->start - mem->parent->start, - resource_size(mem)) < 0) + retval = usb_hcd_setup_local_mem(hcd, mem->start, + mem->start - mem->parent->start, + resource_size(mem)); + if (retval < 0) goto err5; retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval)
From: Tero Kristo t-kristo@ti.com
[ Upstream commit c7c1cbbc9217ebb5601b88d138d4a5358548de9d ]
The parent_names is never released for a component clock definition, causing some memory leak. Fix by releasing it once it is no longer needed.
Reported-by: Tomi Valkeinen tomi.valkeinen@ti.com Signed-off-by: Tero Kristo t-kristo@ti.com Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.com Acked-by: Tony Lindgren tony@atomide.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/ti/composite.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c index 6a89936ba03a..eaa43575cfa5 100644 --- a/drivers/clk/ti/composite.c +++ b/drivers/clk/ti/composite.c @@ -196,6 +196,7 @@ static void __init _register_composite(void *user, if (!cclk->comp_clks[i]) continue; list_del(&cclk->comp_clks[i]->link); + kfree(cclk->comp_clks[i]->parent_names); kfree(cclk->comp_clks[i]); }
From: Rob Herring robh@kernel.org
[ Upstream commit 1b54ae8327a4d630111c8d88ba7906483ec6010b ]
If device_register() has an error, we should bail out of pci_register_host_bridge() rather than continuing on.
Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface") Link: https://lore.kernel.org/r/20200513223859.11295-1-robh@kernel.org Signed-off-by: Rob Herring robh@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/probe.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index d3033873395d..e1e61b9dd066 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -867,9 +867,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge) goto free;
err = device_register(&bridge->dev); - if (err) + if (err) { put_device(&bridge->dev); - + goto free; + } bus->bridge = get_device(&bridge->dev); device_enable_async_suspend(bus->bridge); pci_set_bus_of_node(bus);
From: Michael Ellerman mpe@ellerman.id.au
[ Upstream commit 7ffa8b7dc11752827329e4e84a574ea6aaf24716 ]
Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON:
smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400
Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from:
usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));
ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set.
Dumping tsk->thread.regs->msr we see that it's: 0x1db60000
Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR.
We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack.
Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see:
0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3]
This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common).
init_task->thread.regs is setup at build time in processor.h:
#define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
The early boot code where we setup the initial stack is:
LOAD_REG_ADDR(r3,init_thread_union)
/* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1)
Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs.
So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs.
We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero.
As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002.
Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to.
So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see.
Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more.
Reported-by: Aneesh Kumar K.V aneesh.kumar@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200428123130.73078-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/include/asm/processor.h | 1 - arch/powerpc/kernel/head_64.S | 9 +-------- 2 files changed, 1 insertion(+), 9 deletions(-)
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index a9993e7a443b..64b998db9d3e 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -291,7 +291,6 @@ struct thread_struct { #else #define INIT_THREAD { \ .ksp = INIT_SP, \ - .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ .addr_limit = KERNEL_DS, \ .fpexc_mode = 0, \ .fscr = FSCR_TAR | FSCR_EBB \ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index ad79fddb974d..780f527eabd2 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -945,15 +945,8 @@ start_here_multiplatform: std r0,0(r4) #endif
- /* The following gets the stack set up with the regs */ - /* pointing to the real addr of the kernel stack. This is */ - /* all done to support the C function call below which sets */ - /* up the htab. This is done because we have relocated the */ - /* kernel but are still running in real mode. */ - - LOAD_REG_ADDR(r3,init_thread_union) - /* set up a stack pointer */ + LOAD_REG_ADDR(r3,init_thread_union) LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0
From: Gregory CLEMENT gregory.clement@bootlin.com
[ Upstream commit 84d6f81c1fb58b56eba81ff0a36cf31946064b40 ]
For at least some modems like the TELIT LE910, skipping SOF makes transfers blocking indefinitely after a short amount of data transferred.
Given the small improvement provided by skipping the SOF (just one byte on about 100 bytes), it seems better to completely remove this "feature" than make it optional.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Link: https://lore.kernel.org/r/20200512115323.1447922-3-gregory.clement@bootlin.c... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/n_gsm.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 36a3eb4ad4c5..a5165f989fcf 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -669,7 +669,6 @@ static void gsm_data_kick(struct gsm_mux *gsm) { struct gsm_msg *msg, *nmsg; int len; - int skip_sof = 0;
list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) { if (gsm->constipated && msg->addr) @@ -691,15 +690,10 @@ static void gsm_data_kick(struct gsm_mux *gsm) print_hex_dump_bytes("gsm_data_kick: ", DUMP_PREFIX_OFFSET, gsm->txframe, len); - - if (gsm->output(gsm, gsm->txframe + skip_sof, - len - skip_sof) < 0) + if (gsm->output(gsm, gsm->txframe, len) < 0) break; /* FIXME: Can eliminate one SOF in many more cases */ gsm->tx_bytes -= msg->len; - /* For a burst of frames skip the extra SOF within the - burst */ - skip_sof = 1;
list_del(&msg->list); kfree(msg);
From: Gregory CLEMENT gregory.clement@bootlin.com
[ Upstream commit 01dbb362f0a114fbce19c8abe4cd6f4710e934d5 ]
Warn the upper layer when n_gms is ready to receive data again. Without this the associated virtual tty remains blocked indefinitely.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Link: https://lore.kernel.org/r/20200512115323.1447922-4-gregory.clement@bootlin.c... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/n_gsm.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index a5165f989fcf..8a0d66a05af5 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -665,7 +665,7 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len, * FIXME: lock against link layer control transmissions */
-static void gsm_data_kick(struct gsm_mux *gsm) +static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci) { struct gsm_msg *msg, *nmsg; int len; @@ -697,6 +697,24 @@ static void gsm_data_kick(struct gsm_mux *gsm)
list_del(&msg->list); kfree(msg); + + if (dlci) { + tty_port_tty_wakeup(&dlci->port); + } else { + int i = 0; + + for (i = 0; i < NUM_DLCI; i++) { + struct gsm_dlci *dlci; + + dlci = gsm->dlci[i]; + if (dlci == NULL) { + i++; + continue; + } + + tty_port_tty_wakeup(&dlci->port); + } + } } }
@@ -748,7 +766,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) /* Add to the actual output queue */ list_add_tail(&msg->list, &gsm->tx_list); gsm->tx_bytes += msg->len; - gsm_data_kick(gsm); + gsm_data_kick(gsm, dlci); }
/** @@ -1209,7 +1227,7 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, gsm_control_reply(gsm, CMD_FCON, NULL, 0); /* Kick the link in case it is idling */ spin_lock_irqsave(&gsm->tx_lock, flags); - gsm_data_kick(gsm); + gsm_data_kick(gsm, NULL); spin_unlock_irqrestore(&gsm->tx_lock, flags); break; case CMD_FCOFF: @@ -2519,7 +2537,7 @@ static void gsmld_write_wakeup(struct tty_struct *tty) /* Queue poll */ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); spin_lock_irqsave(&gsm->tx_lock, flags); - gsm_data_kick(gsm); + gsm_data_kick(gsm, NULL); if (gsm->tx_bytes < TX_THRESH_LO) { gsm_dlci_data_sweep(gsm); }
From: Erwin Burema e.burema@gmail.com
[ Upstream commit 10ce77e4817fef99e1166be7e6685a80c63bf77f ]
For USB sound devices using implicit feedback the endpoint used for this feedback should be able to be opened twice, once for required feedback and second time for audio data. This way these devices can be put in duplex audio mode. Since this only works if the settings of the endpoint don't change a check is included for this.
This fixes bug 207023 ("MOTU M2 regression on duplex audio") and should also fix bug 103751 ("M-Audio Fast Track Ultra usb audio device will not operate full-duplex")
Fixes: c249177944b6 ("ALSA: usb-audio: add implicit fb quirk for MOTU M Series") Signed-off-by: Erwin Burema e.burema@gmail.com BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207023 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=103751 Link: https://lore.kernel.org/r/2410739.SCZni40SNb@alpha-wolf Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/card.h | 1 + sound/usb/endpoint.c | 195 ++++++++++++++++++++++++++++++++++++++++++- sound/usb/pcm.c | 5 ++ 3 files changed, 197 insertions(+), 4 deletions(-)
diff --git a/sound/usb/card.h b/sound/usb/card.h index 820e564656ed..d6219fba9699 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -108,6 +108,7 @@ struct snd_usb_endpoint { int iface, altsetting; int skip_packets; /* quirks for devices to ignore the first n packets in a stream */ + bool is_implicit_feedback; /* This endpoint is used as implicit feedback */
spinlock_t lock; struct list_head list; diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index 50104f658ed4..9bea7d3f99f8 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -522,6 +522,8 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
list_add_tail(&ep->list, &chip->ep_list);
+ ep->is_implicit_feedback = 0; + __exit_unlock: mutex_unlock(&chip->mutex);
@@ -621,6 +623,178 @@ static void release_urbs(struct snd_usb_endpoint *ep, int force) ep->nurbs = 0; }
+/* + * Check data endpoint for format differences + */ +static bool check_ep_params(struct snd_usb_endpoint *ep, + snd_pcm_format_t pcm_format, + unsigned int channels, + unsigned int period_bytes, + unsigned int frames_per_period, + unsigned int periods_per_buffer, + struct audioformat *fmt, + struct snd_usb_endpoint *sync_ep) +{ + unsigned int maxsize, minsize, packs_per_ms, max_packs_per_urb; + unsigned int max_packs_per_period, urbs_per_period, urb_packs; + unsigned int max_urbs; + int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels; + int tx_length_quirk = (ep->chip->tx_length_quirk && + usb_pipeout(ep->pipe)); + bool ret = 1; + + if (pcm_format == SNDRV_PCM_FORMAT_DSD_U16_LE && fmt->dsd_dop) { + /* + * When operating in DSD DOP mode, the size of a sample frame + * in hardware differs from the actual physical format width + * because we need to make room for the DOP markers. + */ + frame_bits += channels << 3; + } + + ret = ret && (ep->datainterval == fmt->datainterval); + ret = ret && (ep->stride == frame_bits >> 3); + + switch (pcm_format) { + case SNDRV_PCM_FORMAT_U8: + ret = ret && (ep->silence_value == 0x80); + break; + case SNDRV_PCM_FORMAT_DSD_U8: + case SNDRV_PCM_FORMAT_DSD_U16_LE: + case SNDRV_PCM_FORMAT_DSD_U32_LE: + case SNDRV_PCM_FORMAT_DSD_U16_BE: + case SNDRV_PCM_FORMAT_DSD_U32_BE: + ret = ret && (ep->silence_value == 0x69); + break; + default: + ret = ret && (ep->silence_value == 0); + } + + /* assume max. frequency is 50% higher than nominal */ + ret = ret && (ep->freqmax == ep->freqn + (ep->freqn >> 1)); + /* Round up freqmax to nearest integer in order to calculate maximum + * packet size, which must represent a whole number of frames. + * This is accomplished by adding 0x0.ffff before converting the + * Q16.16 format into integer. + * In order to accurately calculate the maximum packet size when + * the data interval is more than 1 (i.e. ep->datainterval > 0), + * multiply by the data interval prior to rounding. For instance, + * a freqmax of 41 kHz will result in a max packet size of 6 (5.125) + * frames with a data interval of 1, but 11 (10.25) frames with a + * data interval of 2. + * (ep->freqmax << ep->datainterval overflows at 8.192 MHz for the + * maximum datainterval value of 3, at USB full speed, higher for + * USB high speed, noting that ep->freqmax is in units of + * frames per packet in Q16.16 format.) + */ + maxsize = (((ep->freqmax << ep->datainterval) + 0xffff) >> 16) * + (frame_bits >> 3); + if (tx_length_quirk) + maxsize += sizeof(__le32); /* Space for length descriptor */ + /* but wMaxPacketSize might reduce this */ + if (ep->maxpacksize && ep->maxpacksize < maxsize) { + /* whatever fits into a max. size packet */ + unsigned int data_maxsize = maxsize = ep->maxpacksize; + + if (tx_length_quirk) + /* Need to remove the length descriptor to calc freq */ + data_maxsize -= sizeof(__le32); + ret = ret && (ep->freqmax == (data_maxsize / (frame_bits >> 3)) + << (16 - ep->datainterval)); + } + + if (ep->fill_max) + ret = ret && (ep->curpacksize == ep->maxpacksize); + else + ret = ret && (ep->curpacksize == maxsize); + + if (snd_usb_get_speed(ep->chip->dev) != USB_SPEED_FULL) { + packs_per_ms = 8 >> ep->datainterval; + max_packs_per_urb = MAX_PACKS_HS; + } else { + packs_per_ms = 1; + max_packs_per_urb = MAX_PACKS; + } + if (sync_ep && !snd_usb_endpoint_implicit_feedback_sink(ep)) + max_packs_per_urb = min(max_packs_per_urb, + 1U << sync_ep->syncinterval); + max_packs_per_urb = max(1u, max_packs_per_urb >> ep->datainterval); + + /* + * Capture endpoints need to use small URBs because there's no way + * to tell in advance where the next period will end, and we don't + * want the next URB to complete much after the period ends. + * + * Playback endpoints with implicit sync much use the same parameters + * as their corresponding capture endpoint. + */ + if (usb_pipein(ep->pipe) || + snd_usb_endpoint_implicit_feedback_sink(ep)) { + + urb_packs = packs_per_ms; + /* + * Wireless devices can poll at a max rate of once per 4ms. + * For dataintervals less than 5, increase the packet count to + * allow the host controller to use bursting to fill in the + * gaps. + */ + if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) { + int interval = ep->datainterval; + + while (interval < 5) { + urb_packs <<= 1; + ++interval; + } + } + /* make capture URBs <= 1 ms and smaller than a period */ + urb_packs = min(max_packs_per_urb, urb_packs); + while (urb_packs > 1 && urb_packs * maxsize >= period_bytes) + urb_packs >>= 1; + ret = ret && (ep->nurbs == MAX_URBS); + + /* + * Playback endpoints without implicit sync are adjusted so that + * a period fits as evenly as possible in the smallest number of + * URBs. The total number of URBs is adjusted to the size of the + * ALSA buffer, subject to the MAX_URBS and MAX_QUEUE limits. + */ + } else { + /* determine how small a packet can be */ + minsize = (ep->freqn >> (16 - ep->datainterval)) * + (frame_bits >> 3); + /* with sync from device, assume it can be 12% lower */ + if (sync_ep) + minsize -= minsize >> 3; + minsize = max(minsize, 1u); + + /* how many packets will contain an entire ALSA period? */ + max_packs_per_period = DIV_ROUND_UP(period_bytes, minsize); + + /* how many URBs will contain a period? */ + urbs_per_period = DIV_ROUND_UP(max_packs_per_period, + max_packs_per_urb); + /* how many packets are needed in each URB? */ + urb_packs = DIV_ROUND_UP(max_packs_per_period, urbs_per_period); + + /* limit the number of frames in a single URB */ + ret = ret && (ep->max_urb_frames == + DIV_ROUND_UP(frames_per_period, urbs_per_period)); + + /* try to use enough URBs to contain an entire ALSA buffer */ + max_urbs = min((unsigned) MAX_URBS, + MAX_QUEUE * packs_per_ms / urb_packs); + ret = ret && (ep->nurbs == min(max_urbs, + urbs_per_period * periods_per_buffer)); + } + + ret = ret && (ep->datainterval == fmt->datainterval); + ret = ret && (ep->maxpacksize == fmt->maxpacksize); + ret = ret && + (ep->fill_max == !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX)); + + return ret; +} + /* * configure a data endpoint */ @@ -886,10 +1060,23 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, int err;
if (ep->use_count != 0) { - usb_audio_warn(ep->chip, - "Unable to change format on ep #%x: already in use\n", - ep->ep_num); - return -EBUSY; + bool check = ep->is_implicit_feedback && + check_ep_params(ep, pcm_format, + channels, period_bytes, + period_frames, buffer_periods, + fmt, sync_ep); + + if (!check) { + usb_audio_warn(ep->chip, + "Unable to change format on ep #%x: already in use\n", + ep->ep_num); + return -EBUSY; + } + + usb_audio_dbg(ep->chip, + "Ep #%x already in use as implicit feedback but format not changed\n", + ep->ep_num); + return 0; }
/* release old buffers, if any */ diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index e52d129085c0..6c391e5fad2a 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -386,6 +386,8 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, if (!subs->sync_endpoint) return -EINVAL;
+ subs->sync_endpoint->is_implicit_feedback = 1; + subs->data_endpoint->sync_master = subs->sync_endpoint;
return 1; @@ -484,12 +486,15 @@ static int set_sync_endpoint(struct snd_usb_substream *subs, implicit_fb ? SND_USB_ENDPOINT_TYPE_DATA : SND_USB_ENDPOINT_TYPE_SYNC); + if (!subs->sync_endpoint) { if (is_playback && attr == USB_ENDPOINT_SYNC_NONE) return 0; return -EINVAL; }
+ subs->sync_endpoint->is_implicit_feedback = implicit_fb; + subs->data_endpoint->sync_master = subs->sync_endpoint;
return 0;
From: Cristian Klein cristian.klein@elastisys.com
[ Upstream commit fb68ada81e65d593b51544fa43c284322107a742 ]
The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen movement, pen pressure and pen buttons. Interface one reports tablet buttons and tablet scroll. Both use the mouse protocol.
Without these quirks, libinput gets confused about what device it talks to.
For completeness, here is the usbhid-dump:
``` $ sudo usbhid-dump -d 145f:0212 003:013:001:DESCRIPTOR 1588949402.559961 05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07 81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52 09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36 A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20 75 01 81 02 C0
003:013:000:DESCRIPTOR 1588949402.563942 05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08 95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95 02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10 81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF 00 09 00 75 08 95 07 B1 02 C0 C0 ```
Signed-off-by: Cristian Klein cristian.klein@elastisys.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 13b7222ef2c9..c552a6bc627e 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1147,6 +1147,9 @@ #define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882 0x8882 #define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8883 0x8883
+#define USB_VENDOR_ID_TRUST 0x145f +#define USB_DEVICE_ID_TRUST_PANORA_TABLET 0x0212 + #define USB_VENDOR_ID_TURBOX 0x062a #define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201 #define USB_DEVICE_ID_ASUS_MD_5110 0x5110 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 90ec2390ef68..168fdaa1999f 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -168,6 +168,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8883), HID_QUIRK_NOGET }, + { HID_USB_DEVICE(USB_VENDOR_ID_TRUST, USB_DEVICE_ID_TRUST_PANORA_TABLET), HID_QUIRK_MULTI_INPUT | HID_QUIRK_HIDINPUT_FORCE }, { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60), HID_QUIRK_MULTI_INPUT },
From: Mika Westerberg mika.westerberg@linux.intel.com
[ Upstream commit ec411e02b7a2e785a4ed9ed283207cd14f48699d ]
Kai-Heng Feng reported that it takes a long time (> 1 s) to resume Thunderbolt-connected devices from both runtime suspend and system sleep (s2idle).
This was because some Downstream Ports that support > 5 GT/s do not also support Data Link Layer Link Active reporting. Per PCIe r5.0 sec 6.6.1:
With a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request to the device immediately below that Port. Software can determine when Link training completes by polling the Data Link Layer Link Active bit or by setting up an associated interrupt (see Section 6.7.3.3).
Sec 7.5.3.6 requires such Ports to support DLL Link Active reporting, but at least the Intel JHL6240 Thunderbolt 3 Bridge [8086:15c0] and the Intel JHL7540 Thunderbolt 3 Bridge [8086:15ea] do not.
Previously we tried to wait for Link training to complete, but since there was no DLL Link Active reporting, all we could do was wait the worst-case 1000 ms, then another 100 ms.
Instead of using the supported speeds to determine whether to wait for Link training, check whether the port supports DLL Link Active reporting. The Ports in question do not, so we'll wait only the 100 ms required for Ports that support Link speeds <= 5 GT/s.
This of course assumes these Ports always train the Link within 100 ms even if they are operating at > 5 GT/s, which is not required by the spec.
[bhelgaas: commit log, comment] Link: https://bugzilla.kernel.org/show_bug.cgi?id=206837 Link: https://lore.kernel.org/r/20200514133043.27429-1-mika.westerberg@linux.intel... Reported-by: Kai-Heng Feng kai.heng.feng@canonical.com Tested-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index c73e8095a849..689f0280c038 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4608,7 +4608,8 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) * pcie_wait_for_link_delay - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? - * @delay: Delay to wait after link has become active (in ms) + * @delay: Delay to wait after link has become active (in ms). Specify %0 + * for no delay. * * Use this to wait till link becomes active or inactive. */ @@ -4649,7 +4650,7 @@ static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, msleep(10); timeout -= 10; } - if (active && ret) + if (active && ret && delay) msleep(delay); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", @@ -4770,17 +4771,28 @@ void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev) if (!pcie_downstream_port(dev)) return;
- if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) { - pci_dbg(dev, "waiting %d ms for downstream link\n", delay); - msleep(delay); - } else { - pci_dbg(dev, "waiting %d ms for downstream link, after activation\n", - delay); - if (!pcie_wait_for_link_delay(dev, true, delay)) { + /* + * Per PCIe r5.0, sec 6.6.1, for downstream ports that support + * speeds > 5 GT/s, we must wait for link training to complete + * before the mandatory delay. + * + * We can only tell when link training completes via DLL Link + * Active, which is required for downstream ports that support + * speeds > 5 GT/s (sec 7.5.3.6). Unfortunately some common + * devices do not implement Link Active reporting even when it's + * required, so we'll check for that directly instead of checking + * the supported link speed. We assume devices without Link Active + * reporting can train in 100 ms regardless of speed. + */ + if (dev->link_active_reporting) { + pci_dbg(dev, "waiting for link to train\n"); + if (!pcie_wait_for_link_delay(dev, true, 0)) { /* Did not train, no need to wait any further */ return; } } + pci_dbg(child, "waiting %d ms to become accessible\n", delay); + msleep(delay);
if (!pci_device_is_present(child)) { pci_dbg(child, "waiting additional %d ms to become accessible\n", delay);
From: Oded Gabbay oded.gabbay@gmail.com
[ Upstream commit 7a65ee046b2238e053f6ebb610e1a082cfc49490 ]
When doing training, the DL framework (e.g. tensorflow) performs hundreds of thousands of memory allocations and mappings. In case the driver needs to perform hard-reset during training, the driver kills the application and unmaps all those memory allocations. Unfortunately, because of that large amount of mappings, the driver isn't able to do that in the current timeout (5 seconds). Therefore, increase the timeout significantly to 30 seconds to avoid situation where the driver resets the device with active mappings, which sometime can cause a kernel bug.
BTW, it doesn't mean we will spend all the 30 seconds because the reset thread checks every one second if the unmap operation is done.
Reviewed-by: Omer Shpigelman oshpigelman@habana.ai Signed-off-by: Oded Gabbay oded.gabbay@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/habanalabs/habanalabs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/habanalabs.h index 75862be53c60..30addffd76f5 100644 --- a/drivers/misc/habanalabs/habanalabs.h +++ b/drivers/misc/habanalabs/habanalabs.h @@ -23,7 +23,7 @@
#define HL_MMAP_CB_MASK (0x8000000000000000ull >> PAGE_SHIFT)
-#define HL_PENDING_RESET_PER_SEC 5 +#define HL_PENDING_RESET_PER_SEC 30
#define HL_DEVICE_TIMEOUT_USEC 1000000 /* 1 s */
From: Feng Tang feng.tang@intel.com
[ Upstream commit 7c47a219b95d0e06b5ef5fcc7bad807895015eac ]
We met mulitple times of failure of staring bmc-watchdog, due to the runtime memory allocation failure of order 4.
bmc-watchdog: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 1 PID: 2571 Comm: bmc-watchdog Not tainted 5.5.0-00045-g7d6bb61d6188c #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0015.110720180833 11/07/2018 Call Trace: dump_stack+0x66/0x8b warn_alloc+0xfe/0x160 __alloc_pages_slowpath+0xd3e/0xd80 __alloc_pages_nodemask+0x2f0/0x340 kmalloc_order+0x18/0x70 kmalloc_order_trace+0x1d/0xb0 ipmi_create_user+0x55/0x2c0 [ipmi_msghandler] ipmi_open+0x72/0x110 [ipmi_devintf] chrdev_open+0xcb/0x1e0 do_dentry_open+0x1ce/0x380 path_openat+0x305/0x14f0 do_filp_open+0x9b/0x110 do_sys_open+0x1bd/0x250 do_syscall_64+0x5b/0x1f0 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Using vzalloc/vfree for creating ipmi_user heals the problem
Thanks to Stephen Rothwell for finding the vmalloc.h inclusion issue.
Signed-off-by: Feng Tang feng.tang@intel.com Signed-off-by: Corey Minyard cminyard@mvista.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/ipmi/ipmi_msghandler.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 90f5292e2051..ac656a6d5daf 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -33,6 +33,7 @@ #include <linux/workqueue.h> #include <linux/uuid.h> #include <linux/nospec.h> +#include <linux/vmalloc.h>
#define IPMI_DRIVER_VERSION "39.2"
@@ -1170,7 +1171,7 @@ static void free_user_work(struct work_struct *work) remove_work);
cleanup_srcu_struct(&user->release_barrier); - kfree(user); + vfree(user); }
int ipmi_create_user(unsigned int if_num, @@ -1202,7 +1203,7 @@ int ipmi_create_user(unsigned int if_num, if (rv) return rv;
- new_user = kmalloc(sizeof(*new_user), GFP_KERNEL); + new_user = vzalloc(sizeof(*new_user)); if (!new_user) return -ENOMEM;
@@ -1249,7 +1250,7 @@ int ipmi_create_user(unsigned int if_num,
out_kfree: srcu_read_unlock(&ipmi_interfaces_srcu, index); - kfree(new_user); + vfree(new_user); return rv; } EXPORT_SYMBOL(ipmi_create_user);
From: Nicholas Piggin npiggin@gmail.com
[ Upstream commit 8a5054d8cbbe03c68dcb0957c291c942132e4101 ]
The architecture allows for machine check exceptions to cause idle wakeups which resume at the 0x200 address which has to return via the idle wakeup code, but the early machine check handler is run first.
The case of a no state-loss sleep is broken because the early handler uses non-volatile register r1 , which is needed for the wakeup protocol, but it is not restored.
Fix this by loading r1 from the MCE exception frame before returning to the idle wakeup code. Also update the comment which has become stale since the idle rewrite in C.
This crash was found and fix confirmed with a machine check injection test in qemu powernv model (which is not upstream in qemu yet).
Fixes: 10d91611f426d ("powerpc/64s: Reimplement book3s idle code in C") Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200508043408.886394-2-npiggin@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/exceptions-64s.S | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index d0018dd17e0a..70ac8a6ba0c1 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1090,17 +1090,19 @@ EXC_COMMON_BEGIN(machine_check_idle_common) bl machine_check_queue_event
/* - * We have not used any non-volatile GPRs here, and as a rule - * most exception code including machine check does not. - * Therefore PACA_NAPSTATELOST does not need to be set. Idle - * wakeup will restore volatile registers. + * GPR-loss wakeups are relatively straightforward, because the + * idle sleep code has saved all non-volatile registers on its + * own stack, and r1 in PACAR1. * - * Load the original SRR1 into r3 for pnv_powersave_wakeup_mce. + * For no-loss wakeups the r1 and lr registers used by the + * early machine check handler have to be restored first. r2 is + * the kernel TOC, so no need to restore it. * * Then decrement MCE nesting after finishing with the stack. */ ld r3,_MSR(r1) ld r4,_LINK(r1) + ld r1,GPR1(r1)
lhz r11,PACA_IN_MCE(r13) subi r11,r11,1 @@ -1109,7 +1111,7 @@ EXC_COMMON_BEGIN(machine_check_idle_common) mtlr r4 rlwinm r10,r3,47-31,30,31 cmpwi cr1,r10,2 - bltlr cr1 /* no state loss, return to idle caller */ + bltlr cr1 /* no state loss, return to idle caller with r3=SRR1 */ b idle_return_gpr_loss #endif
From: Nicholas Piggin npiggin@gmail.com
[ Upstream commit deb70f7a35a22dffa55b2c3aac71bc6fb0f486ce ]
This was discovered developing qemu fwnmi sreset support. This off-by-one bug means the last 16 bytes of the rtas area can not be used for a 16 byte save area.
It's not a serious bug, and QEMU implementation has to retain a workaround for old kernels, but it's good to tighten it.
Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Acked-by: Mahesh Salgaonkar mahesh@linux.ibm.com Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/platforms/pseries/ras.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 753adeb624f2..13ef77fd648f 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -395,10 +395,11 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id) /* * Some versions of FWNMI place the buffer inside the 4kB page starting at * 0x7000. Other versions place it inside the rtas buffer. We check both. + * Minimum size of the buffer is 16 bytes. */ #define VALID_FWNMI_BUFFER(A) \ - ((((A) >= 0x7000) && ((A) < 0x7ff0)) || \ - (((A) >= rtas.base) && ((A) < (rtas.base + rtas.size - 16)))) + ((((A) >= 0x7000) && ((A) <= 0x8000 - 16)) || \ + (((A) >= rtas.base) && ((A) <= (rtas.base + rtas.size - 16))))
static inline struct rtas_error_log *fwnmi_get_errlog(void) {
From: Bharat Gooty bharat.gooty@broadcom.com
[ Upstream commit 6f0577d1411337a0d97d545abe4a784e9e611516 ]
During different reboot cycles, USB PHY PLL may not always lock during initialization and therefore can cause USB to be not usable.
Hence do not use internal FSM programming sequence for the USB PHY initialization.
Fixes: 4dcddbb38b64 ("phy: sr-usb: Add Stingray USB PHY driver") Signed-off-by: Bharat Gooty bharat.gooty@broadcom.com Signed-off-by: Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com Link: https://lore.kernel.org/r/20200513173947.10919-1-rayagonda.kokatanur@broadco... Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/broadcom/phy-bcm-sr-usb.c | 55 +-------------------------- 1 file changed, 2 insertions(+), 53 deletions(-)
diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c index fe6c58910e4c..7c7862b4f41f 100644 --- a/drivers/phy/broadcom/phy-bcm-sr-usb.c +++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c @@ -16,8 +16,6 @@ enum bcm_usb_phy_version { };
enum bcm_usb_phy_reg { - PLL_NDIV_FRAC, - PLL_NDIV_INT, PLL_CTRL, PHY_CTRL, PHY_PLL_CTRL, @@ -31,18 +29,11 @@ static const u8 bcm_usb_combo_phy_ss[] = { };
static const u8 bcm_usb_combo_phy_hs[] = { - [PLL_NDIV_FRAC] = 0x04, - [PLL_NDIV_INT] = 0x08, [PLL_CTRL] = 0x0c, [PHY_CTRL] = 0x10, };
-#define HSPLL_NDIV_INT_VAL 0x13 -#define HSPLL_NDIV_FRAC_VAL 0x1005 - static const u8 bcm_usb_hs_phy[] = { - [PLL_NDIV_FRAC] = 0x0, - [PLL_NDIV_INT] = 0x4, [PLL_CTRL] = 0x8, [PHY_CTRL] = 0xc, }; @@ -52,7 +43,6 @@ enum pll_ctrl_bits { SSPLL_SUSPEND_EN, PLL_SEQ_START, PLL_LOCK, - PLL_PDIV, };
static const u8 u3pll_ctrl[] = { @@ -66,29 +56,17 @@ static const u8 u3pll_ctrl[] = { #define HSPLL_PDIV_VAL 0x1
static const u8 u2pll_ctrl[] = { - [PLL_PDIV] = 1, [PLL_RESETB] = 5, [PLL_LOCK] = 6, };
enum bcm_usb_phy_ctrl_bits { CORERDY, - AFE_LDO_PWRDWNB, - AFE_PLL_PWRDWNB, - AFE_BG_PWRDWNB, - PHY_ISO, PHY_RESETB, PHY_PCTL, };
#define PHY_PCTL_MASK 0xffff -/* - * 0x0806 of PCTL_VAL has below bits set - * BIT-8 : refclk divider 1 - * BIT-3:2: device mode; mode is not effect - * BIT-1: soft reset active low - */ -#define HSPHY_PCTL_VAL 0x0806 #define SSPHY_PCTL_VAL 0x0006
static const u8 u3phy_ctrl[] = { @@ -98,10 +76,6 @@ static const u8 u3phy_ctrl[] = {
static const u8 u2phy_ctrl[] = { [CORERDY] = 0, - [AFE_LDO_PWRDWNB] = 1, - [AFE_PLL_PWRDWNB] = 2, - [AFE_BG_PWRDWNB] = 3, - [PHY_ISO] = 4, [PHY_RESETB] = 5, [PHY_PCTL] = 6, }; @@ -186,38 +160,13 @@ static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg) int ret = 0; void __iomem *regs = phy_cfg->regs; const u8 *offset; - u32 rd_data;
offset = phy_cfg->offset;
- writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]); - writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]); - - rd_data = readl(regs + offset[PLL_CTRL]); - rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]); - rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]); - writel(rd_data, regs + offset[PLL_CTRL]); - - /* Set Core Ready high */ - bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], - BIT(u2phy_ctrl[CORERDY])); - - /* Maximum timeout for Core Ready done */ - msleep(30); - + bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL], + BIT(u2pll_ctrl[PLL_RESETB])); bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], BIT(u2pll_ctrl[PLL_RESETB])); - bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], - BIT(u2phy_ctrl[PHY_RESETB])); - - - rd_data = readl(regs + offset[PHY_CTRL]); - rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]); - rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]); - writel(rd_data, regs + offset[PHY_CTRL]); - - /* Maximum timeout for PLL reset done */ - msleep(30);
ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], BIT(u2pll_ctrl[PLL_LOCK]));
From: Geoff Levand geoff@infradead.org
[ Upstream commit 126554465d93b10662742128918a5fc338cda4aa ]
The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines are called very late in the shutdown via kexec's mmu_cleanup_all routine. By the time mmu_cleanup_all runs it is too late to use udbg_printf, and calling it will cause PS3 systems to hang.
Remove all debugging statements from ps3_mm_region_destroy() and ps3_mm_vas_destroy() and replace any error reporting with calls to lv1_panic.
With this change builds with 'DEBUG' defined will not cause kexec reboots to hang, and builds with 'DEBUG' defined or not will end in lv1_panic if an error is encountered.
Signed-off-by: Geoff Levand geoff@infradead.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/7325c4af2b4c989c19d6a26b90b1fec9c0615ddf.158904925... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/platforms/ps3/mm.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 423be34f0f5f..f42fe4e86ce5 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -200,13 +200,14 @@ void ps3_mm_vas_destroy(void) { int result;
- DBG("%s:%d: map.vas_id = %llu\n", __func__, __LINE__, map.vas_id); - if (map.vas_id) { result = lv1_select_virtual_address_space(0); - BUG_ON(result); - result = lv1_destruct_virtual_address_space(map.vas_id); - BUG_ON(result); + result += lv1_destruct_virtual_address_space(map.vas_id); + + if (result) { + lv1_panic(0); + } + map.vas_id = 0; } } @@ -304,19 +305,20 @@ static void ps3_mm_region_destroy(struct mem_region *r) int result;
if (!r->destroy) { - pr_info("%s:%d: Not destroying high region: %llxh %llxh\n", - __func__, __LINE__, r->base, r->size); return; }
- DBG("%s:%d: r->base = %llxh\n", __func__, __LINE__, r->base); - if (r->base) { result = lv1_release_memory(r->base); - BUG_ON(result); + + if (result) { + lv1_panic(0); + } + r->size = r->base = r->offset = 0; map.total = map.rm.size; } + ps3_mm_set_repository_highmem(NULL); }
From: Alex Williamson alex.williamson@redhat.com
[ Upstream commit bc138db1b96264b9c1779cf18d5a3b186aa90066 ]
The PCI Code and ID Assignment Specification changed capability ID 0 from reserved to a NULL capability in the v1.1 revision. The NULL capability is defined to include only the 16-bit capability header, ie. only the ID and next pointer. Unfortunately vfio-pci creates a map of config space, where ID 0 is used to reserve the standard type 0 header. Finding an actual capability with this ID therefore results in a bogus range marked in that map and conflicts with subsequent capabilities. As this seems to be a dummy capability anyway and we already support dropping capabilities, let's hide this one rather than delving into the potentially subtle dependencies within our map.
Seen on an NVIDIA Tesla T4.
Reviewed-by: Cornelia Huck cohuck@redhat.com Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/pci/vfio_pci_config.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c index c4d0cf9a1ab9..d6359c37c9e5 100644 --- a/drivers/vfio/pci/vfio_pci_config.c +++ b/drivers/vfio/pci/vfio_pci_config.c @@ -1460,7 +1460,12 @@ static int vfio_cap_init(struct vfio_pci_device *vdev) if (ret) return ret;
- if (cap <= PCI_CAP_ID_MAX) { + /* + * ID 0 is a NULL capability, conflicting with our fake + * PCI_CAP_ID_BASIC. As it has no content, consider it + * hidden for now. + */ + if (cap && cap <= PCI_CAP_ID_MAX) { len = pci_cap_length[cap]; if (len == 0xFF) { /* Variable length */ len = vfio_cap_len(vdev, cap, pos);
From: Qais Yousef qais.yousef@arm.com
[ Upstream commit 1cb3b0095c3d0bb96912bfbbce4fc006d41f367c ]
The following warning was observed when attempting to suspend to disk using a USB flash as a swap device.
[ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]---
The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform.
Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cam... Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Qais Yousef qais.yousef@arm.com CC: Tony Prisk linux@prisktech.co.nz CC: Greg Kroah-Hartman gregkh@linuxfoundation.org CC: Mathias Nyman mathias.nyman@intel.com CC: Oliver Neukum oneukum@suse.de CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/ohci-platform.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 7addfc2cbadc..4a8456f12a73 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -299,6 +299,11 @@ static int ohci_platform_resume(struct device *dev) }
ohci_resume(hcd, false); + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + return 0; } #endif /* CONFIG_PM_SLEEP */
From: Roy Spliet nouveau@spliet.org
[ Upstream commit e4337877c5d578722c0716f131fb774522013cf5 ]
When allocation for mdp5_kms fails, calling mdp5_destroy() leads to undefined behaviour, likely a nullptr exception or use-after-free troubles.
Signed-off-by: Roy Spliet nouveau@spliet.org Reviewed-by: Abhinav Kumar abhinavk@codeaurora.org Signed-off-by: Rob Clark robdclark@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c index 91cd76a2bab1..77823ccdd0f8 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c @@ -1037,7 +1037,8 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
return 0; fail: - mdp5_destroy(pdev); + if (mdp5_kms) + mdp5_destroy(pdev); return ret; }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 0e0e10fde0e9808d1991268f5dca69fb36c025f7 ]
The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low).
Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200518072416.5348-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index e62e1d7815aa..f222e1091bae 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -742,6 +742,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Toshiba Encore WT8-A */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT8-A"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_JD_NOT_INV | + BYT_RT5640_MCLK_EN), + }, { /* Catch-all for generic Insyde tablets, must be last */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
From: Tang Bin tangbin@cmss.chinamobile.com
[ Upstream commit d49292025f79693d3348f8e2029a8b4703be0f0a ]
The function ehci_mxc_drv_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it.
Fixes: 7e8d5cd93fac ("USB: Add EHCI support for MX27 and MX31 based boards") Signed-off-by: Zhang Shengju zhangshengju@cmss.chinamobile.com Signed-off-by: Tang Bin tangbin@cmss.chinamobile.com Reviewed-by: Peter Chen peter.chen@nxp.com Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/ehci-mxc.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index c9f91e6c72b6..7f65c86047dd 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -50,6 +50,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) }
irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq;
hcd = usb_create_hcd(&ehci_mxc_hc_driver, dev, dev_name(dev)); if (!hcd)
From: Gregory CLEMENT gregory.clement@bootlin.com
[ Upstream commit 4dd31f1ffec6c370c3c2e0c605628bf5e16d5c46 ]
When submitting the previous fix "tty: n_gsm: Fix waking up upper tty layer when room available". It was suggested to switch from a while to a for loop, but when doing it, there was a remaining bogus i++.
This patch removes this i++ and also reorganizes the code making it more compact.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT gregory.clement@bootlin.com Link: https://lore.kernel.org/r/20200518084517.2173242-3-gregory.clement@bootlin.c... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/n_gsm.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 8a0d66a05af5..75408b9f232d 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -703,17 +703,9 @@ static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci) } else { int i = 0;
- for (i = 0; i < NUM_DLCI; i++) { - struct gsm_dlci *dlci; - - dlci = gsm->dlci[i]; - if (dlci == NULL) { - i++; - continue; - } - - tty_port_tty_wakeup(&dlci->port); - } + for (i = 0; i < NUM_DLCI; i++) + if (gsm->dlci[i]) + tty_port_tty_wakeup(&gsm->dlci[i]->port); } } }
From: Souptick Joarder jrdr.linux@gmail.com
[ Upstream commit c9d7e3da1f3c4cf5dddfc5d7ce4d76d013aba1cc ]
Corrected error handling goto sequnece. Level put_pages should be called when pinned pages >= 0 && pinned != npages. Level free_pages should be called when pinned pages < 0.
Fixes: fa8dda1edef9 ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support") Signed-off-by: Souptick Joarder jrdr.linux@gmail.com Acked-by: Wu Hao hao.wu@intel.com Reviewed-by: Xu Yilun yilun.xu@intel.com Link: https://lore.kernel.org/r/1589825991-3545-1-git-send-email-jrdr.linux@gmail.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/fpga/dfl-afu-dma-region.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/fpga/dfl-afu-dma-region.c b/drivers/fpga/dfl-afu-dma-region.c index 62f924489db5..5942343a5d6e 100644 --- a/drivers/fpga/dfl-afu-dma-region.c +++ b/drivers/fpga/dfl-afu-dma-region.c @@ -61,10 +61,10 @@ static int afu_dma_pin_pages(struct dfl_feature_platform_data *pdata, region->pages); if (pinned < 0) { ret = pinned; - goto put_pages; + goto free_pages; } else if (pinned != npages) { ret = -EFAULT; - goto free_pages; + goto put_pages; }
dev_dbg(dev, "%d pages pinned\n", pinned);
From: Marek Szyprowski m.szyprowski@samsung.com
[ Upstream commit 25bdae0f1c6609ceaf55fe6700654f0be2253d8e ]
Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to match its behaviour with SCLK clock for AUD_I2S (I2S0) device until a proper fix for Exynos I2S driver is ready.
This fixes the following synchronous abort issue revealed by the probe order change caused by the commit 93d2e4322aa7 ("of: platform: Batch fwnode parsing when adding all top level devices")
Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701 Hardware name: Samsung TM2E board (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : samsung_i2s_probe+0x768/0x8f0 lr : samsung_i2s_probe+0x688/0x8f0 ... Call trace: samsung_i2s_probe+0x768/0x8f0 platform_drv_probe+0x50/0xa8 really_probe+0x108/0x370 driver_probe_device+0x54/0xb8 __device_attach_driver+0x90/0xc0 bus_for_each_drv+0x70/0xc8 __device_attach+0xdc/0x140 device_initial_probe+0x10/0x18 bus_probe_device+0x94/0xa0 deferred_probe_work_func+0x70/0xa8 process_one_work+0x2a8/0x718 worker_thread+0x48/0x470 kthread+0x134/0x160 ret_from_fork+0x10/0x1c Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00) ---[ end trace ccf721c9400ddbd6 ]---
Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/samsung/clk-exynos5433.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c index 4b1aa9382ad2..6f29ecd0442e 100644 --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -1706,7 +1706,8 @@ static const struct samsung_gate_clock peric_gate_clks[] __initconst = { GATE(CLK_SCLK_PCM1, "sclk_pcm1", "sclk_pcm1_peric", ENABLE_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_I2S1, "sclk_i2s1", "sclk_i2s1_peric", - ENABLE_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0), + ENABLE_SCLK_PERIC, 6, + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0), GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC, 5, CLK_SET_RATE_PARENT, 0), GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit 005231128e9e97461e81fa32421957a7664317ca ]
Let the PHY generate the RX and TX delay on the Odroid-C1 and MXIII Plus.
Previously we did not know that these boards used an RX delay. We assumed that setting the TX delay on the MAC side It turns out that these boards also require an RX delay of 2ns (verified on Odroid-C1, but the u-boot code uses the same setup on both boards). Ethernet only worked because u-boot added this RX delay on the MAC side.
The 4ns TX delay was also wrong and the result of using an unsupported RGMII TX clock divider setting. This has been fixed in the driver with commit bd6f48546b9cb7 ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs").
Switch to phy-mode "rgmii-id" to let the PHY side handle all the delays, (as recommended by the Ethernet maintainers anyways) to correctly describe the need for a 2ns RX as well as 2ns TX delay on these boards. This fixes the Ethernet performance on Odroid-C1 where there was a huge amount of packet loss when transmitting data due to the incorrect TX delay.
Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Link: https://lore.kernel.org/r/20200512215148.540322-3-martin.blumenstingl@google... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/meson8b-odroidc1.dts | 3 +-- arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 4 +--- 2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index a24eccc354b9..10f6d601eadb 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -202,9 +202,8 @@ ðmac { pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default";
- phy-mode = "rgmii"; phy-handle = <ð_phy>; - amlogic,tx-delay-ns = <4>; + phy-mode = "rgmii-id";
nvmem-cells = <ðernet_mac_address>; nvmem-cell-names = "mac-address"; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index d54477b1001c..cc498191ddd1 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -69,9 +69,7 @@ ðmac { pinctrl-names = "default";
phy-handle = <ð_phy0>; - phy-mode = "rgmii"; - - amlogic,tx-delay-ns = <4>; + phy-mode = "rgmii-id";
mdio { compatible = "snps,dwmac-mdio";
From: Lijun Ou oulijun@huawei.com
[ Upstream commit 349be276509455ac2f19fa4051ed773082c6a27e ]
The qkey queried through the query ud qp verb is a fixed value and it should be read from qp context.
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC") Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei... Signed-off-by: Lijun Ou oulijun@huawei.com Signed-off-by: Weihang Li liweihang@huawei.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 4540b00ccee9..9a8053bd01e2 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -4564,7 +4564,7 @@ static int hns_roce_v2_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr, qp_attr->path_mig_state = IB_MIG_ARMED; qp_attr->ah_attr.type = RDMA_AH_ATTR_TYPE_ROCE; if (hr_qp->ibqp.qp_type == IB_QPT_UD) - qp_attr->qkey = V2_QKEY_VAL; + qp_attr->qkey = le32_to_cpu(context.qkey_xrcd);
qp_attr->rq_psn = roce_get_field(context.byte_108_rx_reqepsn, V2_QPC_BYTE_108_RX_REQ_EPSN_M,
From: Lang Cheng chenglang@huawei.com
[ Upstream commit 441c88d5b3ff80108ff536c6cf80591187015403 ]
The firmware has reduced the number of descriptions of command HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise the hardware will report error 4(CMD_NEXT_ERR).
Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08") Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei... Signed-off-by: Lang Cheng chenglang@huawei.com Signed-off-by: Weihang Li liweihang@huawei.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 32 ++++++++-------------- 1 file changed, 12 insertions(+), 20 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 9a8053bd01e2..0502c90c83ed 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -1349,34 +1349,26 @@ static int hns_roce_query_pf_resource(struct hns_roce_dev *hr_dev) static int hns_roce_query_pf_timer_resource(struct hns_roce_dev *hr_dev) { struct hns_roce_pf_timer_res_a *req_a; - struct hns_roce_cmq_desc desc[2]; - int ret, i; + struct hns_roce_cmq_desc desc; + int ret;
- for (i = 0; i < 2; i++) { - hns_roce_cmq_setup_basic_desc(&desc[i], - HNS_ROCE_OPC_QUERY_PF_TIMER_RES, - true); + hns_roce_cmq_setup_basic_desc(&desc, HNS_ROCE_OPC_QUERY_PF_TIMER_RES, + true);
- if (i == 0) - desc[i].flag |= cpu_to_le16(HNS_ROCE_CMD_FLAG_NEXT); - else - desc[i].flag &= ~cpu_to_le16(HNS_ROCE_CMD_FLAG_NEXT); - } - - ret = hns_roce_cmq_send(hr_dev, desc, 2); + ret = hns_roce_cmq_send(hr_dev, &desc, 1); if (ret) return ret;
- req_a = (struct hns_roce_pf_timer_res_a *)desc[0].data; + req_a = (struct hns_roce_pf_timer_res_a *)desc.data;
hr_dev->caps.qpc_timer_bt_num = - roce_get_field(req_a->qpc_timer_bt_idx_num, - PF_RES_DATA_1_PF_QPC_TIMER_BT_NUM_M, - PF_RES_DATA_1_PF_QPC_TIMER_BT_NUM_S); + roce_get_field(req_a->qpc_timer_bt_idx_num, + PF_RES_DATA_1_PF_QPC_TIMER_BT_NUM_M, + PF_RES_DATA_1_PF_QPC_TIMER_BT_NUM_S); hr_dev->caps.cqc_timer_bt_num = - roce_get_field(req_a->cqc_timer_bt_idx_num, - PF_RES_DATA_2_PF_CQC_TIMER_BT_NUM_M, - PF_RES_DATA_2_PF_CQC_TIMER_BT_NUM_S); + roce_get_field(req_a->cqc_timer_bt_idx_num, + PF_RES_DATA_2_PF_CQC_TIMER_BT_NUM_M, + PF_RES_DATA_2_PF_CQC_TIMER_BT_NUM_S);
return 0; }
From: Bodo Stroesser bstroesser@ts.fujitsu.com
[ Upstream commit 61fb2482216679b9e1e797440c148bb143a5040a ]
When tcmu queues a new command - no matter whether in command ring or in qfull_queue - a cmd_id from IDR udev->commands is assigned to the command.
If userspace sends a wrong command completion containing the cmd_id of a command on the qfull_queue, tcmu_handle_completions() finds the command in the IDR and calls tcmu_handle_completion() for it. This might do some nasty things because commands in qfull_queue do not have a valid dbi list.
To fix this bug, we no longer add queued commands to the idr. Instead the cmd_id is assign when a command is written to the command ring.
Due to this change I had to adapt the source code at several places where up to now an idr_for_each had been done.
[mkp: fix checkpatch warnings]
Link: https://lore.kernel.org/r/20200518164833.12775-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie mchristi@redhat.com Signed-off-by: Bodo Stroesser bstroesser@ts.fujitsu.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_user.c | 154 ++++++++++++++---------------- 1 file changed, 71 insertions(+), 83 deletions(-)
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 9425354aef99..70c64e69a1d2 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -882,41 +882,24 @@ static inline size_t tcmu_cmd_get_cmd_size(struct tcmu_cmd *tcmu_cmd, return command_size; }
-static int tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo, - struct timer_list *timer) +static void tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo, + struct timer_list *timer) { - struct tcmu_dev *udev = tcmu_cmd->tcmu_dev; - int cmd_id; - - if (tcmu_cmd->cmd_id) - goto setup_timer; - - cmd_id = idr_alloc(&udev->commands, tcmu_cmd, 1, USHRT_MAX, GFP_NOWAIT); - if (cmd_id < 0) { - pr_err("tcmu: Could not allocate cmd id.\n"); - return cmd_id; - } - tcmu_cmd->cmd_id = cmd_id; - - pr_debug("allocated cmd %u for dev %s tmo %lu\n", tcmu_cmd->cmd_id, - udev->name, tmo / MSEC_PER_SEC); - -setup_timer: if (!tmo) - return 0; + return;
tcmu_cmd->deadline = round_jiffies_up(jiffies + msecs_to_jiffies(tmo)); if (!timer_pending(timer)) mod_timer(timer, tcmu_cmd->deadline);
- return 0; + pr_debug("Timeout set up for cmd %p, dev = %s, tmo = %lu\n", tcmu_cmd, + tcmu_cmd->tcmu_dev->name, tmo / MSEC_PER_SEC); }
static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd) { struct tcmu_dev *udev = tcmu_cmd->tcmu_dev; unsigned int tmo; - int ret;
/* * For backwards compat if qfull_time_out is not set use @@ -931,13 +914,11 @@ static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd) else tmo = TCMU_TIME_OUT;
- ret = tcmu_setup_cmd_timer(tcmu_cmd, tmo, &udev->qfull_timer); - if (ret) - return ret; + tcmu_setup_cmd_timer(tcmu_cmd, tmo, &udev->qfull_timer);
list_add_tail(&tcmu_cmd->queue_entry, &udev->qfull_queue); - pr_debug("adding cmd %u on dev %s to ring space wait queue\n", - tcmu_cmd->cmd_id, udev->name); + pr_debug("adding cmd %p on dev %s to ring space wait queue\n", + tcmu_cmd, udev->name); return 0; }
@@ -959,7 +940,7 @@ static int queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, sense_reason_t *scsi_err) struct tcmu_mailbox *mb; struct tcmu_cmd_entry *entry; struct iovec *iov; - int iov_cnt, ret; + int iov_cnt, cmd_id; uint32_t cmd_head; uint64_t cdb_off; bool copy_to_data_area; @@ -1060,14 +1041,21 @@ static int queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, sense_reason_t *scsi_err) } entry->req.iov_bidi_cnt = iov_cnt;
- ret = tcmu_setup_cmd_timer(tcmu_cmd, udev->cmd_time_out, - &udev->cmd_timer); - if (ret) { - tcmu_cmd_free_data(tcmu_cmd, tcmu_cmd->dbi_cnt); + cmd_id = idr_alloc(&udev->commands, tcmu_cmd, 1, USHRT_MAX, GFP_NOWAIT); + if (cmd_id < 0) { + pr_err("tcmu: Could not allocate cmd id.\n");
+ tcmu_cmd_free_data(tcmu_cmd, tcmu_cmd->dbi_cnt); *scsi_err = TCM_OUT_OF_RESOURCES; return -1; } + tcmu_cmd->cmd_id = cmd_id; + + pr_debug("allocated cmd id %u for cmd %p dev %s\n", tcmu_cmd->cmd_id, + tcmu_cmd, udev->name); + + tcmu_setup_cmd_timer(tcmu_cmd, udev->cmd_time_out, &udev->cmd_timer); + entry->hdr.cmd_id = tcmu_cmd->cmd_id;
/* @@ -1279,50 +1267,39 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) return handled; }
-static int tcmu_check_expired_cmd(int id, void *p, void *data) +static void tcmu_check_expired_ring_cmd(struct tcmu_cmd *cmd) { - struct tcmu_cmd *cmd = p; - struct tcmu_dev *udev = cmd->tcmu_dev; - u8 scsi_status; struct se_cmd *se_cmd; - bool is_running; - - if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) - return 0;
if (!time_after(jiffies, cmd->deadline)) - return 0; + return;
- is_running = test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags); + set_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags); + list_del_init(&cmd->queue_entry); se_cmd = cmd->se_cmd; + cmd->se_cmd = NULL;
- if (is_running) { - /* - * If cmd_time_out is disabled but qfull is set deadline - * will only reflect the qfull timeout. Ignore it. - */ - if (!udev->cmd_time_out) - return 0; + pr_debug("Timing out inflight cmd %u on dev %s.\n", + cmd->cmd_id, cmd->tcmu_dev->name);
- set_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags); - /* - * target_complete_cmd will translate this to LUN COMM FAILURE - */ - scsi_status = SAM_STAT_CHECK_CONDITION; - list_del_init(&cmd->queue_entry); - cmd->se_cmd = NULL; - } else { - list_del_init(&cmd->queue_entry); - idr_remove(&udev->commands, id); - tcmu_free_cmd(cmd); - scsi_status = SAM_STAT_TASK_SET_FULL; - } + target_complete_cmd(se_cmd, SAM_STAT_CHECK_CONDITION); +}
- pr_debug("Timing out cmd %u on dev %s that is %s.\n", - id, udev->name, is_running ? "inflight" : "queued"); +static void tcmu_check_expired_queue_cmd(struct tcmu_cmd *cmd) +{ + struct se_cmd *se_cmd;
- target_complete_cmd(se_cmd, scsi_status); - return 0; + if (!time_after(jiffies, cmd->deadline)) + return; + + list_del_init(&cmd->queue_entry); + se_cmd = cmd->se_cmd; + tcmu_free_cmd(cmd); + + pr_debug("Timing out queued cmd %p on dev %s.\n", + cmd, cmd->tcmu_dev->name); + + target_complete_cmd(se_cmd, SAM_STAT_TASK_SET_FULL); }
static void tcmu_device_timedout(struct tcmu_dev *udev) @@ -1407,16 +1384,15 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name) return &udev->se_dev; }
-static bool run_qfull_queue(struct tcmu_dev *udev, bool fail) +static void run_qfull_queue(struct tcmu_dev *udev, bool fail) { struct tcmu_cmd *tcmu_cmd, *tmp_cmd; LIST_HEAD(cmds); - bool drained = true; sense_reason_t scsi_ret; int ret;
if (list_empty(&udev->qfull_queue)) - return true; + return;
pr_debug("running %s's cmdr queue forcefail %d\n", udev->name, fail);
@@ -1425,11 +1401,10 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail) list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, queue_entry) { list_del_init(&tcmu_cmd->queue_entry);
- pr_debug("removing cmd %u on dev %s from queue\n", - tcmu_cmd->cmd_id, udev->name); + pr_debug("removing cmd %p on dev %s from queue\n", + tcmu_cmd, udev->name);
if (fail) { - idr_remove(&udev->commands, tcmu_cmd->cmd_id); /* * We were not able to even start the command, so * fail with busy to allow a retry in case runner @@ -1444,10 +1419,8 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail)
ret = queue_cmd_ring(tcmu_cmd, &scsi_ret); if (ret < 0) { - pr_debug("cmd %u on dev %s failed with %u\n", - tcmu_cmd->cmd_id, udev->name, scsi_ret); - - idr_remove(&udev->commands, tcmu_cmd->cmd_id); + pr_debug("cmd %p on dev %s failed with %u\n", + tcmu_cmd, udev->name, scsi_ret); /* * Ignore scsi_ret for now. target_complete_cmd * drops it. @@ -1462,13 +1435,11 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail) * the queue */ list_splice_tail(&cmds, &udev->qfull_queue); - drained = false; break; } }
tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer); - return drained; }
static int tcmu_irqcontrol(struct uio_info *info, s32 irq_on) @@ -1652,6 +1623,8 @@ static void tcmu_dev_kref_release(struct kref *kref) if (tcmu_check_and_free_pending_cmd(cmd) != 0) all_expired = false; } + if (!list_empty(&udev->qfull_queue)) + all_expired = false; idr_destroy(&udev->commands); WARN_ON(!all_expired);
@@ -2037,9 +2010,6 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level) mutex_lock(&udev->cmdr_lock);
idr_for_each_entry(&udev->commands, cmd, i) { - if (!test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags)) - continue; - pr_debug("removing cmd %u on dev %s from ring (is expired %d)\n", cmd->cmd_id, udev->name, test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)); @@ -2077,6 +2047,8 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
del_timer(&udev->cmd_timer);
+ run_qfull_queue(udev, false); + mutex_unlock(&udev->cmdr_lock); }
@@ -2698,6 +2670,7 @@ static void find_free_blocks(void) static void check_timedout_devices(void) { struct tcmu_dev *udev, *tmp_dev; + struct tcmu_cmd *cmd, *tmp_cmd; LIST_HEAD(devs);
spin_lock_bh(&timed_out_udevs_lock); @@ -2708,9 +2681,24 @@ static void check_timedout_devices(void) spin_unlock_bh(&timed_out_udevs_lock);
mutex_lock(&udev->cmdr_lock); - idr_for_each(&udev->commands, tcmu_check_expired_cmd, NULL);
- tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer); + /* + * If cmd_time_out is disabled but qfull is set deadline + * will only reflect the qfull timeout. Ignore it. + */ + if (udev->cmd_time_out) { + list_for_each_entry_safe(cmd, tmp_cmd, + &udev->inflight_queue, + queue_entry) { + tcmu_check_expired_ring_cmd(cmd); + } + tcmu_set_next_deadline(&udev->inflight_queue, + &udev->cmd_timer); + } + list_for_each_entry_safe(cmd, tmp_cmd, &udev->qfull_queue, + queue_entry) { + tcmu_check_expired_queue_cmd(cmd); + } tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer);
mutex_unlock(&udev->cmdr_lock);
From: Wei Yongjun weiyongjun1@huawei.com
[ Upstream commit 89f12d6509bff004852c51cb713a439a86816b24 ]
'chan_name' is malloced in imx_scu_probe() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak.
Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support") Signed-off-by: Wei Yongjun weiyongjun1@huawei.com Reviewed-by: Dong Aisheng aisheng.dong@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/imx/imx-scu.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c index e48d971ffb61..a3b11bc71dcb 100644 --- a/drivers/firmware/imx/imx-scu.c +++ b/drivers/firmware/imx/imx-scu.c @@ -300,6 +300,7 @@ static int imx_scu_probe(struct platform_device *pdev) if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to request mbox chan %s ret %d\n", chan_name, ret); + kfree(chan_name); return ret; }
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 2c4656dfd994538176db30ce09c02cc0dfc361ae ]
a) Dirty cache needs to be written back not just in the writeback_cache case, since the dirty pages may come from memory maps.
b) The fuse_writeback_range() helper takes an inclusive interval, so the end position needs to be pos+len-1 instead of pos+len.
Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()") Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fuse/file.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 713d55a61890..e730e3d8ad99 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -3280,13 +3280,11 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in, if (file_inode(file_in)->i_sb != file_inode(file_out)->i_sb) return -EXDEV;
- if (fc->writeback_cache) { - inode_lock(inode_in); - err = fuse_writeback_range(inode_in, pos_in, pos_in + len); - inode_unlock(inode_in); - if (err) - return err; - } + inode_lock(inode_in); + err = fuse_writeback_range(inode_in, pos_in, pos_in + len - 1); + inode_unlock(inode_in); + if (err) + return err;
inode_lock(inode_out);
@@ -3294,11 +3292,9 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in, if (err) goto out;
- if (fc->writeback_cache) { - err = fuse_writeback_range(inode_out, pos_out, pos_out + len); - if (err) - goto out; - } + err = fuse_writeback_range(inode_out, pos_out, pos_out + len - 1); + if (err) + goto out;
if (is_unstable) set_bit(FUSE_I_SIZE_UNSTABLE, &fi_out->state);
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 9b46418c40fe910e6537618f9932a8be78a3dd6c ]
After the copy operation completes the cache is not up-to-date. Truncate all pages in the interval that has successfully been copied.
Truncating completely copied dirty pages is okay, since the data has been overwritten anyway. Truncating partially copied dirty pages is not okay; add a comment for now.
Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()") Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fuse/file.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c index e730e3d8ad99..66214707a945 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -3292,6 +3292,24 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in, if (err) goto out;
+ /* + * Write out dirty pages in the destination file before sending the COPY + * request to userspace. After the request is completed, truncate off + * pages (including partial ones) from the cache that have been copied, + * since these contain stale data at that point. + * + * This should be mostly correct, but if the COPY writes to partial + * pages (at the start or end) and the parts not covered by the COPY are + * written through a memory map after calling fuse_writeback_range(), + * then these partial page modifications will be lost on truncation. + * + * It is unlikely that someone would rely on such mixed style + * modifications. Yet this does give less guarantees than if the + * copying was performed with write(2). + * + * To fix this a i_mmap_sem style lock could be used to prevent new + * faults while the copy is ongoing. + */ err = fuse_writeback_range(inode_out, pos_out, pos_out + len - 1); if (err) goto out; @@ -3315,6 +3333,10 @@ static ssize_t __fuse_copy_file_range(struct file *file_in, loff_t pos_in, if (err) goto out;
+ truncate_inode_pages_range(inode_out->i_mapping, + ALIGN_DOWN(pos_out, PAGE_SIZE), + ALIGN(pos_out + outarg.size, PAGE_SIZE) - 1); + if (fc->writeback_cache) { fuse_write_update_size(inode_out, pos_out + outarg.size); file_update_time(file_out);
From: Jon Hunter jonathanh@nvidia.com
[ Upstream commit bba25915b172c72f6fa635f091624d799e3c9cae ]
The 'phy-mode' property is currently defined as 'rgmii' for Jetson Xavier. This indicates that the RGMII RX and TX delays are set by the MAC and the internal delays set by the PHY are not used.
If the Marvell PHY driver is enabled, such that it is used and not the generic PHY, ethernet failures are seen (DHCP is failing to obtain an IP address) and this is caused because the Marvell PHY driver is disabling the internal RX and TX delays. For Jetson Xavier the internal PHY RX and TX delay should be used and so fix this by setting the 'phy-mode' to 'rgmii-id' and not 'rgmii'.
Fixes: f89b58ce71a9 ("arm64: tegra: Add ethernet controller on Tegra194") Signed-off-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 02909a48dfcd..7899759a12f8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -32,7 +32,7 @@ ethernet@2490000 {
phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id";
mdio { #address-cells = <1>;
From: Vidya Sagar vidyas@nvidia.com
[ Upstream commit 3482a7afb261e2de9269a7f9ad0f4a3a82a83a53 ]
Fix flag in PCIe controllers device-tree nodes 'ranges' property to correctly represent 64-bit resources.
Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT") Signed-off-by: Vidya Sagar vidyas@nvidia.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 457b815d57f4..2f3926719434 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1192,7 +1192,7 @@ pcie@14100000 {
bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc2000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */ 0x82000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ };
@@ -1238,7 +1238,7 @@ pcie@14120000 {
bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc2000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */ 0x82000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ };
@@ -1284,7 +1284,7 @@ pcie@14140000 {
bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc2000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */ 0x82000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ };
@@ -1330,7 +1330,7 @@ pcie@14160000 {
bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc2000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ 0x82000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ };
@@ -1376,7 +1376,7 @@ pcie@14180000 {
bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ 0x82000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ };
@@ -1426,7 +1426,7 @@ pcie@141a0000 {
bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc2000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ };
From: Qian Cai cai@lca.pw
[ Upstream commit c2e929b18cea6cbf71364f22d742d9aad7f4677a ]
Booting a power9 server with hash MMU could trigger an undefined behaviour because pud_offset(p4d, 0) will do,
0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10)
Fix it by converting pud_index() and friends to static inline functions.
UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15 shift exponent 34 is too large for 32-bit type 'int' CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13 Call Trace: dump_stack+0xf4/0x164 (unreliable) ubsan_epilogue+0x18/0x78 __ubsan_handle_shift_out_of_bounds+0x160/0x21c walk_pagetables+0x2cc/0x700 walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282 (inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311 ptdump_check_wx+0x8c/0xf0 mark_rodata_ro+0x48/0x80 kernel_init+0x74/0x194 ret_from_kernel_thread+0x5c/0x74
Suggested-by: Christophe Leroy christophe.leroy@c-s.fr Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Michael Ellerman mpe@ellerman.id.au Reviewed-by: Christophe Leroy christophe.leroy@c-s.fr Link: https://lore.kernel.org/r/20200306044852.3236-1-cai@lca.pw Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/include/asm/book3s/64/pgtable.h | 23 ++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index a143d394ff46..e1eb8aa9cfbb 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -998,10 +998,25 @@ extern struct page *pgd_page(pgd_t pgd); #define pud_page_vaddr(pud) __va(pud_val(pud) & ~PUD_MASKED_BITS) #define pgd_page_vaddr(pgd) __va(pgd_val(pgd) & ~PGD_MASKED_BITS)
-#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & (PTRS_PER_PGD - 1)) -#define pud_index(address) (((address) >> (PUD_SHIFT)) & (PTRS_PER_PUD - 1)) -#define pmd_index(address) (((address) >> (PMD_SHIFT)) & (PTRS_PER_PMD - 1)) -#define pte_index(address) (((address) >> (PAGE_SHIFT)) & (PTRS_PER_PTE - 1)) +static inline unsigned long pgd_index(unsigned long address) +{ + return (address >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1); +} + +static inline unsigned long pud_index(unsigned long address) +{ + return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1); +} + +static inline unsigned long pmd_index(unsigned long address) +{ + return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); +} + +static inline unsigned long pte_index(unsigned long address) +{ + return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1); +}
/* * Find an entry in a page-table-directory. We combine the address region
From: Hannes Reinecke hare@suse.de
[ Upstream commit 489dc0f06a5837f87482c0ce61d830d24e17082e ]
The only case where dmz_get_zone_for_reclaim() cannot return a zone is if the respective lists are empty. So we should just return a simple NULL value here as we really don't have an error code which would make sense.
Signed-off-by: Hannes Reinecke hare@suse.de Reviewed-by: Damien Le Moal damien.lemoal@wdc.com Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-zoned-metadata.c | 4 ++-- drivers/md/dm-zoned-reclaim.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/md/dm-zoned-metadata.c b/drivers/md/dm-zoned-metadata.c index e0a6cf9239f1..e6b0039d07aa 100644 --- a/drivers/md/dm-zoned-metadata.c +++ b/drivers/md/dm-zoned-metadata.c @@ -1589,7 +1589,7 @@ static struct dm_zone *dmz_get_rnd_zone_for_reclaim(struct dmz_metadata *zmd) return dzone; }
- return ERR_PTR(-EBUSY); + return NULL; }
/* @@ -1609,7 +1609,7 @@ static struct dm_zone *dmz_get_seq_zone_for_reclaim(struct dmz_metadata *zmd) return zone; }
- return ERR_PTR(-EBUSY); + return NULL; }
/* diff --git a/drivers/md/dm-zoned-reclaim.c b/drivers/md/dm-zoned-reclaim.c index e7ace908a9b7..d50817320e8e 100644 --- a/drivers/md/dm-zoned-reclaim.c +++ b/drivers/md/dm-zoned-reclaim.c @@ -349,8 +349,8 @@ static int dmz_do_reclaim(struct dmz_reclaim *zrc)
/* Get a data zone */ dzone = dmz_get_zone_for_reclaim(zmd); - if (IS_ERR(dzone)) - return PTR_ERR(dzone); + if (!dzone) + return -EBUSY;
start = jiffies;
From: Bjorn Helgaas bhelgaas@google.com
[ Upstream commit 7b38fd9760f51cc83d80eed2cfbde8b5ead9e93a ]
Except for Endpoints, we enable PTM at enumeration-time. Previously we did not account for the fact that Switch Downstream Ports are not permitted to have a PTM capability; their PTM behavior is controlled by the Upstream Port (PCIe r5.0, sec 7.9.16). Since Downstream Ports don't have a PTM capability, we did not mark them as "ptm_enabled", which meant that pci_enable_ptm() on an Endpoint failed because there was no PTM path to it.
Mark Downstream Ports as "ptm_enabled" if their Upstream Port has PTM enabled.
Fixes: eec097d43100 ("PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints") Reported-by: Aditya Paluri Venkata.AdityaPaluri@synopsys.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pcie/ptm.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c index 9361f3aa26ab..357a454cafa0 100644 --- a/drivers/pci/pcie/ptm.c +++ b/drivers/pci/pcie/ptm.c @@ -39,10 +39,6 @@ void pci_ptm_init(struct pci_dev *dev) if (!pci_is_pcie(dev)) return;
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM); - if (!pos) - return; - /* * Enable PTM only on interior devices (root ports, switch ports, * etc.) on the assumption that it causes no link traffic until an @@ -52,6 +48,23 @@ void pci_ptm_init(struct pci_dev *dev) pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END)) return;
+ /* + * Switch Downstream Ports are not permitted to have a PTM + * capability; their PTM behavior is controlled by the Upstream + * Port (PCIe r5.0, sec 7.9.16). + */ + ups = pci_upstream_bridge(dev); + if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM && + ups && ups->ptm_enabled) { + dev->ptm_granularity = ups->ptm_granularity; + dev->ptm_enabled = 1; + return; + } + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM); + if (!pos) + return; + pci_read_config_dword(dev, pos + PCI_PTM_CAP, &cap); local_clock = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
@@ -61,7 +74,6 @@ void pci_ptm_init(struct pci_dev *dev) * the spec recommendation (PCIe r3.1, sec 7.32.3), select the * furthest upstream Time Source as the PTM Root. */ - ups = pci_upstream_bridge(dev); if (ups && ups->ptm_enabled) { ctrl = PCI_PTM_CTRL_ENABLE; if (ups->ptm_granularity == 0)
From: Marc Zyngier maz@kernel.org
[ Upstream commit 0414b93e78d87ecc24ae1a7e61fe97deb29fa2f4 ]
On a system that uses the internal DWC MSI widget, I get this warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected:
debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present!
This is due to the fact that the DWC MSI code tries to register two IRQ domains for the same firmware node, without telling the low level code how to distinguish them (by setting a bus token). This further confuses debugfs which tries to create corresponding files for each domain.
Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is the closest thing we have as to "generic MSI".
Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.org Signed-off-by: Marc Zyngier maz@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Acked-by: Jingoo Han jingoohan1@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pcie-designware-host.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 8615f1548882..fbcb211cceb4 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -263,6 +263,8 @@ int dw_pcie_allocate_domains(struct pcie_port *pp) return -ENOMEM; }
+ irq_domain_update_bus_token(pp->irq_domain, DOMAIN_BUS_NEXUS); + pp->msi_domain = pci_msi_create_irq_domain(fwnode, &dw_pcie_msi_domain_info, pp->irq_domain);
From: Marc Zyngier maz@kernel.org
[ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ]
The vim3l board does not work with a standard PCIe switch (ASM1184e), spitting all kind of errors - hinting at HW misconfiguration (no link, port enumeration issues, etc).
According to the the Synopsys DWC PCIe Reference Manual, in the section dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:
"Sets all internal timers to fast mode for simulation purposes."
it is sound to set this bit from a simulation perspective, but on actual silicon, which expects timers to have a nominal value, it is not.
Make sure the FAST_LINK_MODE bit is cleared when configuring the RC to solve this problem.
Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Marc Zyngier maz@kernel.org [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Acked-by: Rob Herring robh@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pci-meson.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c index b927a92e3463..8c9f88704874 100644 --- a/drivers/pci/controller/dwc/pci-meson.c +++ b/drivers/pci/controller/dwc/pci-meson.c @@ -301,11 +301,11 @@ static void meson_pcie_init_dw(struct meson_pcie *mp) meson_cfg_writel(mp, val, PCIE_CFG0);
val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF); - val &= ~LINK_CAPABLE_MASK; + val &= ~(LINK_CAPABLE_MASK | FAST_LINK_MODE); meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF); - val |= LINK_CAPABLE_X1 | FAST_LINK_MODE; + val |= LINK_CAPABLE_X1; meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
From: Maor Gottlieb maorg@mellanox.com
[ Upstream commit 63a3345c2d42a9b29e1ce2d3a4043689b3995cea ]
The allocated ports structure in never freed. The free function should be called by release_cma_ports_group, but the group is never released since we don't remove its default group.
Remove default groups when device group is deleted.
Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm") Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.org Signed-off-by: Maor Gottlieb maorg@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/cma_configfs.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/infiniband/core/cma_configfs.c b/drivers/infiniband/core/cma_configfs.c index 8b0b5ae22e4c..726e70b68249 100644 --- a/drivers/infiniband/core/cma_configfs.c +++ b/drivers/infiniband/core/cma_configfs.c @@ -322,8 +322,21 @@ static struct config_group *make_cma_dev(struct config_group *group, return ERR_PTR(err); }
+static void drop_cma_dev(struct config_group *cgroup, struct config_item *item) +{ + struct config_group *group = + container_of(item, struct config_group, cg_item); + struct cma_dev_group *cma_dev_group = + container_of(group, struct cma_dev_group, device_group); + + configfs_remove_default_groups(&cma_dev_group->ports_group); + configfs_remove_default_groups(&cma_dev_group->device_group); + config_item_put(item); +} + static struct configfs_group_operations cma_subsys_group_ops = { .make_group = make_cma_dev, + .drop_item = drop_cma_dev, };
static const struct config_item_type cma_subsys_type = {
From: Stefan Riedmueller s.riedmueller@phytec.de
[ Upstream commit a0948ddba65f4f6d3cfb5e2b84685485d0452966 ]
There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter.
This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset.
Signed-off-by: Stefan Riedmueller s.riedmueller@phytec.de Reviewed-by: Guenter Roeck linux@roeck-us.net Reviewed-by: Adam Thomson Adam.Thomson.Opensource@diasemi.com Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@linux-watchdog.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/watchdog/da9062_wdt.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c index e92f38fcb7a4..1b9bcfed39e9 100644 --- a/drivers/watchdog/da9062_wdt.c +++ b/drivers/watchdog/da9062_wdt.c @@ -55,11 +55,6 @@ static int da9062_wdt_update_timeout_register(struct da9062_watchdog *wdt, unsigned int regval) { struct da9062 *chip = wdt->hw; - int ret; - - ret = da9062_reset_watchdog_timer(wdt); - if (ret) - return ret;
regmap_update_bits(chip->regmap, DA9062AA_CONTROL_D,
From: Fabrice Gasnier fabrice.gasnier@st.com
[ Upstream commit 8c935deacebb8fac8f41378701eb79d12f3c2e2d ]
When the remote wakeup interrupt is triggered, lx_state is resumed from L2 to L0 state. But when the gadget resume is called, lx_state is still L2. This prevents the resume callback to queue any request. Any attempt to queue a request from resume callback will result in: - "submit request only in active state" debug message to be issued - dwc2_hsotg_ep_queue() returns -EAGAIN
Call the gadget resume routine after the core is in L0 state.
Fixes: f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume")
Acked-by: Minas Harutyunyan hminas@synopsys.com Signed-off-by: Fabrice Gasnier fabrice.gasnier@st.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/core_intr.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 6af6add3d4c0..6272b4ae4740 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -421,10 +421,13 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) if (ret && (ret != -ENOTSUPP)) dev_err(hsotg->dev, "exit power_down failed\n");
+ /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; call_gadget(hsotg, resume); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; } - /* Change to L0 state */ - hsotg->lx_state = DWC2_L0; } else { if (hsotg->params.power_down) return;
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit 7a0fbcf7c308920bc6116b3a5fb21c8cc5fec128 ]
Clang warns:
drivers/usb/gadget/udc/s3c2410_udc.c:255:11: warning: comparison of address of 'ep->queue' equal to a null pointer is always false [-Wtautological-pointer-compare] if (&ep->queue == NULL) ~~~~^~~~~ ~~~~ 1 warning generated.
It is not wrong, queue is not a pointer so if ep is not NULL, the address of queue cannot be NULL. No other driver does a check like this and this check has been around since the driver was first introduced, presumably with no issues so it does not seem like this check should be something else. Just remove it.
Commit afe956c577b2d ("kbuild: Enable -Wtautological-compare") exposed this but it is not the root cause of the warning.
Fixes: 3fc154b6b8134 ("USB Gadget driver for Samsung s3c2410 ARM SoC") Link: https://github.com/ClangBuiltLinux/linux/issues/1004 Reviewed-by: Nick Desaulniers ndesaulniers@google.com Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/s3c2410_udc.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index f82208fbc249..5dcc0692b95c 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -251,10 +251,6 @@ static void s3c2410_udc_done(struct s3c2410_ep *ep, static void s3c2410_udc_nuke(struct s3c2410_udc *udc, struct s3c2410_ep *ep, int status) { - /* Sanity check */ - if (&ep->queue == NULL) - return; - while (!list_empty(&ep->queue)) { struct s3c2410_request *req; req = list_entry(ep->queue.next, struct s3c2410_request,
From: Colin Ian King colin.king@canonical.com
[ Upstream commit eafa80041645cd7604c4357b1a0cd4a3c81f2227 ]
Currently pointer ep is being dereferenced before it is null checked leading to a null pointer dereference issue. Fix this by only assigning pointer udc once ep is known to be not null. Also remove a debug message that requires a valid udc which may not be possible at that point.
Addresses-Coverity: ("Dereference before null check") Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx") Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/lpc32xx_udc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index bf6c81e2f8cc..6d2f1f98f13d 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -1614,17 +1614,17 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); - struct lpc32xx_udc *udc = ep->udc; + struct lpc32xx_udc *udc; u16 maxpacket; u32 tmp; unsigned long flags;
/* Verify EP data */ if ((!_ep) || (!ep) || (!desc) || - (desc->bDescriptorType != USB_DT_ENDPOINT)) { - dev_dbg(udc->dev, "bad ep or descriptor\n"); + (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; - } + + udc = ep->udc; maxpacket = usb_endpoint_maxp(desc); if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) { dev_dbg(udc->dev, "bad ep descriptor's packet size\n"); @@ -1872,7 +1872,7 @@ static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) { struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); - struct lpc32xx_udc *udc = ep->udc; + struct lpc32xx_udc *udc; unsigned long flags;
if ((!ep) || (ep->hwep_num <= 1)) @@ -1882,6 +1882,7 @@ static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) if (ep->is_in) return -EAGAIN;
+ udc = ep->udc; spin_lock_irqsave(&udc->lock, flags);
if (value == 1) {
From: Qiushi Wu wu000273@umn.edu
[ Upstream commit 44734a594196bf1d474212f38fe3a0d37a73278b ]
m66592_free_request() is called under label "err_add_udc" and "clean_up", and m66592->ep0_req is not set to NULL after first free, leading to a double-free. Fix this issue by setting m66592->ep0_req to NULL after the first free.
Fixes: 0f91349b89f3 ("usb: gadget: convert all users to the new udc infrastructure") Signed-off-by: Qiushi Wu wu000273@umn.edu Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/m66592-udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c index a8288df6aadf..ea59b56e5402 100644 --- a/drivers/usb/gadget/udc/m66592-udc.c +++ b/drivers/usb/gadget/udc/m66592-udc.c @@ -1667,7 +1667,7 @@ static int m66592_probe(struct platform_device *pdev)
err_add_udc: m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); - + m66592->ep0_req = NULL; clean_up3: if (m66592->pdata->on_chip) { clk_disable(m66592->clk);
From: Pawel Laszczak pawell@cadence.com
[ Upstream commit 5d363120aa548ba52d58907a295eee25f8207ed2 ]
This patch adds new config_ep_by_speed_and_alt function which extends the config_ep_by_speed about alt parameter. This additional parameter allows to find proper usb_ss_ep_comp_descriptor.
Problem has appeared during testing f_tcm (BOT/UAS) driver function.
f_tcm function for SS use array of headers for both BOT/UAS alternate setting:
static struct usb_descriptor_header *uasp_ss_function_desc[] = { (struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc,
(struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL, };
The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS.
During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object.
Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to uasp_ss_bi_desc.
This is due to the fact that it searches endpoint based on endpoint address:
for_each_ep_desc(speed_desc, d_spd) { chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; if (chosen_desc->bEndpoitAddress == _ep->address) goto ep_found; }
And in result it uses the descriptor from BOT alternate setting instead UAS.
Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot.
Signed-off-by: Jayshri Pawar jpawar@cadence.com Signed-off-by: Pawel Laszczak pawell@cadence.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/composite.c | 78 ++++++++++++++++++++++++++-------- include/linux/usb/composite.h | 3 ++ 2 files changed, 64 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d98ca1566e95..f75ff1a75dc4 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -96,40 +96,43 @@ function_descriptors(struct usb_function *f, }
/** - * next_ep_desc() - advance to the next EP descriptor + * next_desc() - advance to the next desc_type descriptor * @t: currect pointer within descriptor array + * @desc_type: descriptor type * - * Return: next EP descriptor or NULL + * Return: next desc_type descriptor or NULL * - * Iterate over @t until either EP descriptor found or + * Iterate over @t until either desc_type descriptor found or * NULL (that indicates end of list) encountered */ static struct usb_descriptor_header** -next_ep_desc(struct usb_descriptor_header **t) +next_desc(struct usb_descriptor_header **t, u8 desc_type) { for (; *t; t++) { - if ((*t)->bDescriptorType == USB_DT_ENDPOINT) + if ((*t)->bDescriptorType == desc_type) return t; } return NULL; }
/* - * for_each_ep_desc()- iterate over endpoint descriptors in the - * descriptors list - * @start: pointer within descriptor array. - * @ep_desc: endpoint descriptor to use as the loop cursor + * for_each_desc() - iterate over desc_type descriptors in the + * descriptors list + * @start: pointer within descriptor array. + * @iter_desc: desc_type descriptor to use as the loop cursor + * @desc_type: wanted descriptr type */ -#define for_each_ep_desc(start, ep_desc) \ - for (ep_desc = next_ep_desc(start); \ - ep_desc; ep_desc = next_ep_desc(ep_desc+1)) +#define for_each_desc(start, iter_desc, desc_type) \ + for (iter_desc = next_desc(start, desc_type); \ + iter_desc; iter_desc = next_desc(iter_desc + 1, desc_type))
/** - * config_ep_by_speed() - configures the given endpoint + * config_ep_by_speed_and_alt() - configures the given endpoint * according to gadget speed. * @g: pointer to the gadget * @f: usb function * @_ep: the endpoint to configure + * @alt: alternate setting number * * Return: error code, 0 on success * @@ -142,11 +145,13 @@ next_ep_desc(struct usb_descriptor_header **t) * Note: the supplied function should hold all the descriptors * for supported speeds */ -int config_ep_by_speed(struct usb_gadget *g, - struct usb_function *f, - struct usb_ep *_ep) +int config_ep_by_speed_and_alt(struct usb_gadget *g, + struct usb_function *f, + struct usb_ep *_ep, + u8 alt) { struct usb_endpoint_descriptor *chosen_desc = NULL; + struct usb_interface_descriptor *int_desc = NULL; struct usb_descriptor_header **speed_desc = NULL;
struct usb_ss_ep_comp_descriptor *comp_desc = NULL; @@ -182,8 +187,21 @@ int config_ep_by_speed(struct usb_gadget *g, default: speed_desc = f->fs_descriptors; } + + /* find correct alternate setting descriptor */ + for_each_desc(speed_desc, d_spd, USB_DT_INTERFACE) { + int_desc = (struct usb_interface_descriptor *)*d_spd; + + if (int_desc->bAlternateSetting == alt) { + speed_desc = d_spd; + goto intf_found; + } + } + return -EIO; + +intf_found: /* find descriptors */ - for_each_ep_desc(speed_desc, d_spd) { + for_each_desc(speed_desc, d_spd, USB_DT_ENDPOINT) { chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; if (chosen_desc->bEndpointAddress == _ep->address) goto ep_found; @@ -237,6 +255,32 @@ int config_ep_by_speed(struct usb_gadget *g, } return 0; } +EXPORT_SYMBOL_GPL(config_ep_by_speed_and_alt); + +/** + * config_ep_by_speed() - configures the given endpoint + * according to gadget speed. + * @g: pointer to the gadget + * @f: usb function + * @_ep: the endpoint to configure + * + * Return: error code, 0 on success + * + * This function chooses the right descriptors for a given + * endpoint according to gadget speed and saves it in the + * endpoint desc field. If the endpoint already has a descriptor + * assigned to it - overwrites it with currently corresponding + * descriptor. The endpoint maxpacket field is updated according + * to the chosen descriptor. + * Note: the supplied function should hold all the descriptors + * for supported speeds + */ +int config_ep_by_speed(struct usb_gadget *g, + struct usb_function *f, + struct usb_ep *_ep) +{ + return config_ep_by_speed_and_alt(g, f, _ep, 0); +} EXPORT_SYMBOL_GPL(config_ep_by_speed);
/** diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 8675e145ea8b..2040696d75b6 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -249,6 +249,9 @@ int usb_function_activate(struct usb_function *);
int usb_interface_id(struct usb_configuration *, struct usb_function *);
+int config_ep_by_speed_and_alt(struct usb_gadget *g, struct usb_function *f, + struct usb_ep *_ep, u8 alt); + int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, struct usb_ep *_ep);
From: Siddharth Gupta sidgup@codeaurora.org
[ Upstream commit 5967577231f9b19acd5a59485e9075964065bbe3 ]
Misuse of CONFIG_* in UAPI headers should result in an error. These config options can be set in userspace by the user application which includes these headers to control the APIs and structures being used in a kernel which supports multiple targets.
Signed-off-by: Siddharth Gupta sidgup@codeaurora.org Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/headers_install.sh | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/scripts/headers_install.sh b/scripts/headers_install.sh index a07668a5c36b..94a833597a88 100755 --- a/scripts/headers_install.sh +++ b/scripts/headers_install.sh @@ -64,7 +64,7 @@ configs=$(sed -e ' d ' $OUTFILE)
-# The entries in the following list are not warned. +# The entries in the following list do not result in an error. # Please do not add a new entry. This list is only for existing ones. # The list will be reduced gradually, and deleted eventually. (hopefully) # @@ -98,18 +98,19 @@ include/uapi/linux/raw.h:CONFIG_MAX_RAW_DEVS
for c in $configs do - warn=1 + leak_error=1
for ignore in $config_leak_ignores do if echo "$INFILE:$c" | grep -q "$ignore$"; then - warn= + leak_error= break fi done
- if [ "$warn" = 1 ]; then - echo "warning: $INFILE: leak $c to user-space" >&2 + if [ "$leak_error" = 1 ]; then + echo "error: $INFILE: leak $c to user-space" >&2 + exit 1 fi done
From: Potnuri Bharat Teja bharat@chelsio.com
[ Upstream commit 49ea0c036ede81f126f1a9389d377999fdf5c5a1 ]
Remove device specific debugfs entries immediately if LLD detaches a particular ULD device in case of fatal PCI errors.
Link: https://lore.kernel.org/r/20200524190814.17599-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja bharat@chelsio.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/cxgb4/device.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index 599340c1f0b8..541dbcf22d0e 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -953,6 +953,7 @@ void c4iw_dealloc(struct uld_ctx *ctx) static void c4iw_remove(struct uld_ctx *ctx) { pr_debug("c4iw_dev %p\n", ctx->dev); + debugfs_remove_recursive(ctx->dev->debugfs_root); c4iw_unregister_device(ctx->dev); c4iw_dealloc(ctx); }
From: Borislav Petkov bp@suse.de
[ Upstream commit de308d1815c9e8fe602a958c5c76142ff6501d75 ]
The commit
c84cb3735fd5 ("x86/apic: Move TSC deadline timer debug printk")
removed the message which said that the deadline timer was enabled. It added a pr_debug() message which is issued when deadline timer validation succeeds.
Well, issued only when CONFIG_DYNAMIC_DEBUG is enabled - otherwise pr_debug() calls get optimized away if DEBUG is not defined in the compilation unit.
Therefore, make the above message pr_info() so that it is visible in dmesg.
Signed-off-by: Borislav Petkov bp@suse.de Link: https://lkml.kernel.org/r/20200525104218.27018-1-bp@alien8.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/apic/apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 25b8c45467fc..fce94c799f01 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2099,7 +2099,7 @@ void __init init_apic_mappings(void) unsigned int new_apicid;
if (apic_validate_deadline_timer()) - pr_debug("TSC deadline timer available\n"); + pr_info("TSC deadline timer available\n");
if (x2apic_mode) { boot_cpu_physical_apicid = read_apic_id();
From: Amelie Delaunay amelie.delaunay@st.com
[ Upstream commit e583649d87ec090444aa5347af0927cd6e8581ae ]
STMFX supply is disabled during suspend. To avoid a too early access to the STMFX firmware on resume, reset the chip and wait for its firmware to be loaded.
Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver") Signed-off-by: Amelie Delaunay amelie.delaunay@st.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/stmfx.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c index 857991cb3cbb..fde6541e347c 100644 --- a/drivers/mfd/stmfx.c +++ b/drivers/mfd/stmfx.c @@ -501,6 +501,13 @@ static int stmfx_resume(struct device *dev) } }
+ /* Reset STMFX - supply has been stopped during suspend */ + ret = stmfx_chip_reset(stmfx); + if (ret) { + dev_err(stmfx->dev, "Failed to reset chip: %d\n", ret); + return ret; + } + ret = regmap_raw_write(stmfx->map, STMFX_REG_SYS_CTRL, &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl)); if (ret)
From: Amelie Delaunay amelie.delaunay@st.com
[ Upstream commit 60c2c4bcb9202acad4cc26af20b44b6bd7874f7b ]
In case the interrupt signal can't be configured, IRQ domain needs to be removed.
Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver") Signed-off-by: Amelie Delaunay amelie.delaunay@st.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/stmfx.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c index fde6541e347c..1977fe95f876 100644 --- a/drivers/mfd/stmfx.c +++ b/drivers/mfd/stmfx.c @@ -287,14 +287,19 @@ static int stmfx_irq_init(struct i2c_client *client)
ret = regmap_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, irqoutpin); if (ret) - return ret; + goto irq_exit;
ret = devm_request_threaded_irq(stmfx->dev, client->irq, NULL, stmfx_irq_handler, irqtrigger | IRQF_ONESHOT, "stmfx", stmfx); if (ret) - stmfx_irq_exit(client); + goto irq_exit; + + return 0; + +irq_exit: + stmfx_irq_exit(client);
return ret; }
From: Amelie Delaunay amelie.delaunay@st.com
[ Upstream commit 97eda5dcc2cde5dcc778bef7a9344db3b6bf8ef5 ]
When STMFX supply is stopped, spurious interrupt can occur. To avoid that, disable the interrupt in suspend before disabling the regulator and re-enable it at the end of resume.
Fixes: 06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver") Signed-off-by: Amelie Delaunay amelie.delaunay@st.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/stmfx.c | 6 ++++++ include/linux/mfd/stmfx.h | 1 + 2 files changed, 7 insertions(+)
diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c index 1977fe95f876..711979afd90a 100644 --- a/drivers/mfd/stmfx.c +++ b/drivers/mfd/stmfx.c @@ -296,6 +296,8 @@ static int stmfx_irq_init(struct i2c_client *client) if (ret) goto irq_exit;
+ stmfx->irq = client->irq; + return 0;
irq_exit: @@ -486,6 +488,8 @@ static int stmfx_suspend(struct device *dev) if (ret) return ret;
+ disable_irq(stmfx->irq); + if (stmfx->vdd) return regulator_disable(stmfx->vdd);
@@ -529,6 +533,8 @@ static int stmfx_resume(struct device *dev) if (ret) return ret;
+ enable_irq(stmfx->irq); + return 0; } #endif diff --git a/include/linux/mfd/stmfx.h b/include/linux/mfd/stmfx.h index 3c67983678ec..744dce63946e 100644 --- a/include/linux/mfd/stmfx.h +++ b/include/linux/mfd/stmfx.h @@ -109,6 +109,7 @@ struct stmfx { struct device *dev; struct regmap *map; struct regulator *vdd; + int irq; struct irq_domain *irq_domain; struct mutex lock; /* IRQ bus lock */ u8 irq_src;
From: Christophe Leroy christophe.leroy@csgroup.eu
[ Upstream commit 4b19f96a81bceaf0bcf44d79c0855c61158065ec ]
Mapping RO data as ROX is not an issue since that data cannot be modified to introduce an exploit.
PPC64 accepts to have RO data mapped ROX, as a trade off between kernel size and strictness of protection.
On PPC32, kernel size is even more critical as amount of memory is usually small.
Depending on the number of available IBATs, the last IBATs might overflow the end of text. Only warn if it crosses the end of RO data.
Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/6499f8eeb2a36330e5c9fc1cee9a79374875bd54.158986698... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/mm/book3s32/mmu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c index 84d5fab94f8f..1424a120710e 100644 --- a/arch/powerpc/mm/book3s32/mmu.c +++ b/arch/powerpc/mm/book3s32/mmu.c @@ -187,6 +187,7 @@ void mmu_mark_initmem_nx(void) int i; unsigned long base = (unsigned long)_stext - PAGE_OFFSET; unsigned long top = (unsigned long)_etext - PAGE_OFFSET; + unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET; unsigned long size;
if (IS_ENABLED(CONFIG_PPC_BOOK3S_601)) @@ -201,9 +202,10 @@ void mmu_mark_initmem_nx(void) size = block_size(base, top); size = max(size, 128UL << 10); if ((top - base) > size) { - if (strict_kernel_rwx_enabled()) - pr_warn("Kernel _etext not properly aligned\n"); size <<= 1; + if (strict_kernel_rwx_enabled() && base + size > border) + pr_warn("Some RW data is getting mapped X. " + "Adjust CONFIG_DATA_SHIFT to avoid that.\n"); } setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); base += size;
From: Qiushi Wu wu000273@umn.edu
[ Upstream commit 25bf943e4e7b47282bd86ae7d39e039217ebb007 ]
Function "pm_runtime_get_sync()" is not handled by "pm_runtime_put()" if "PTR_ERR(rst) == -EPROBE_DEFER". Fix this issue by adding "pm_runtime_put()" into this error path.
Fixes: f65bb92ca12e ("ASoC: img-i2s-in: Add runtime PM") Signed-off-by: Qiushi Wu wu000273@umn.edu Link: https://lore.kernel.org/r/20200525055011.31925-1-wu000273@umn.edu Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/img/img-i2s-in.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/img/img-i2s-in.c b/sound/soc/img/img-i2s-in.c index fdd2c73fd2fa..869fe0068cbd 100644 --- a/sound/soc/img/img-i2s-in.c +++ b/sound/soc/img/img-i2s-in.c @@ -482,6 +482,7 @@ static int img_i2s_in_probe(struct platform_device *pdev) if (IS_ERR(rst)) { if (PTR_ERR(rst) == -EPROBE_DEFER) { ret = -EPROBE_DEFER; + pm_runtime_put(&pdev->dev); goto err_suspend; }
From: Qian Cai cai@lca.pw
[ Upstream commit 1518ac272e789cae8c555d69951b032a275b7602 ]
Finished a qemu-kvm (-device vfio-pci,host=0001:01:00.0) triggers a few memory leaks after a while because vfio_pci_set_ctx_trigger_single() calls eventfd_ctx_fdget() without the matching eventfd_ctx_put() later. Fix it by calling eventfd_ctx_put() for those memory in vfio_pci_release() before vfio_device_release().
unreferenced object 0xebff008981cc2b00 (size 128): comm "qemu-kvm", pid 4043, jiffies 4294994816 (age 9796.310s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4 [<000000005fcec025>] do_eventfd+0x54/0x1ac [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44 [<00000000b819758c>] do_el0_svc+0x128/0x1dc [<00000000b244e810>] el0_sync_handler+0xd0/0x268 [<00000000d495ef94>] el0_sync+0x164/0x180 unreferenced object 0x29ff008981cc4180 (size 128): comm "qemu-kvm", pid 4043, jiffies 4294994818 (age 9796.290s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4 [<000000005fcec025>] do_eventfd+0x54/0x1ac [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44 [<00000000b819758c>] do_el0_svc+0x128/0x1dc [<00000000b244e810>] el0_sync_handler+0xd0/0x268 [<00000000d495ef94>] el0_sync+0x164/0x180
Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/pci/vfio_pci.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index 02206162eaa9..d917dd2df3b3 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -472,6 +472,10 @@ static void vfio_pci_release(void *device_data) if (!(--vdev->refcnt)) { vfio_spapr_pci_eeh_release(vdev->pdev); vfio_pci_disable(vdev); + if (vdev->err_trigger) + eventfd_ctx_put(vdev->err_trigger); + if (vdev->req_trigger) + eventfd_ctx_put(vdev->req_trigger); }
mutex_unlock(&vdev->reflck->lock);
On Wed, 17 Jun 2020 21:15:16 -0400 Sasha Levin sashal@kernel.org wrote:
From: Qian Cai cai@lca.pw
[ Upstream commit 1518ac272e789cae8c555d69951b032a275b7602 ]
Finished a qemu-kvm (-device vfio-pci,host=0001:01:00.0) triggers a few memory leaks after a while because vfio_pci_set_ctx_trigger_single() calls eventfd_ctx_fdget() without the matching eventfd_ctx_put() later. Fix it by calling eventfd_ctx_put() for those memory in vfio_pci_release() before vfio_device_release().
unreferenced object 0xebff008981cc2b00 (size 128): comm "qemu-kvm", pid 4043, jiffies 4294994816 (age 9796.310s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4 [<000000005fcec025>] do_eventfd+0x54/0x1ac [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44 [<00000000b819758c>] do_el0_svc+0x128/0x1dc [<00000000b244e810>] el0_sync_handler+0xd0/0x268 [<00000000d495ef94>] el0_sync+0x164/0x180 unreferenced object 0x29ff008981cc4180 (size 128): comm "qemu-kvm", pid 4043, jiffies 4294994818 (age 9796.290s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4 [<000000005fcec025>] do_eventfd+0x54/0x1ac [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44 [<00000000b819758c>] do_el0_svc+0x128/0x1dc [<00000000b244e810>] el0_sync_handler+0xd0/0x268 [<00000000d495ef94>] el0_sync+0x164/0x180
Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
drivers/vfio/pci/vfio_pci.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index 02206162eaa9..d917dd2df3b3 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -472,6 +472,10 @@ static void vfio_pci_release(void *device_data) if (!(--vdev->refcnt)) { vfio_spapr_pci_eeh_release(vdev->pdev); vfio_pci_disable(vdev);
if (vdev->err_trigger)eventfd_ctx_put(vdev->err_trigger);if (vdev->req_trigger)eventfd_ctx_put(vdev->req_trigger);mutex_unlock(&vdev->reflck->lock);
This has a fix pending, I'd suggest not picking it on its own:
https://lore.kernel.org/kvm/20200616085052.sahrunsesjyjeyf2@beryllium.lan/ https://lore.kernel.org/kvm/159234276956.31057.6902954364435481688.stgit@gim...
Thanks, Alex
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 9d7464b18892332e35ff37f0b024429a1a9835e6 ]
The pr_debug() dereferences "cmd" after we already freed it by calling tcmu_free_cmd(cmd). The debug printk needs to be done earlier.
Link: https://lore.kernel.org/r/20200523101129.GB98132@mwanda Fixes: 61fb24822166 ("scsi: target: tcmu: Userspace must not complete queued commands") Reviewed-by: Mike Christie mchristi@redhat.com Reviewed-by: David Disseldorp ddiss@suse.de Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_user.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 70c64e69a1d2..a497e7c1f4fc 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -1292,13 +1292,13 @@ static void tcmu_check_expired_queue_cmd(struct tcmu_cmd *cmd) if (!time_after(jiffies, cmd->deadline)) return;
+ pr_debug("Timing out queued cmd %p on dev %s.\n", + cmd, cmd->tcmu_dev->name); + list_del_init(&cmd->queue_entry); se_cmd = cmd->se_cmd; tcmu_free_cmd(cmd);
- pr_debug("Timing out queued cmd %p on dev %s.\n", - cmd, cmd->tcmu_dev->name); - target_complete_cmd(se_cmd, SAM_STAT_TASK_SET_FULL); }
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit f376c43bec4f8ee8d1ba5c5c4cfbd6e84fb279cb ]
bcm2835_register_gate is used as a callback for the clk_register member of bcm2835_clk_desc, which expects a struct clk_hw * return type but bcm2835_register_gate returns a struct clk *.
This discrepancy is hidden by the fact that bcm2835_register_gate is cast to the typedef bcm2835_clk_register by the _REGISTER macro. This turns out to be a control flow integrity violation, which is how this was noticed.
Change the return type of bcm2835_register_gate to be struct clk_hw * and use clk_hw_register_gate to do so. This should be a non-functional change as clk_register_gate calls clk_hw_register_gate anyways but this is needed to avoid issues with further changes.
Fixes: b19f009d4510 ("clk: bcm2835: Migrate to clk_hw based registration and OF APIs") Link: https://github.com/ClangBuiltLinux/linux/issues/1028 Signed-off-by: Nathan Chancellor natechancellor@gmail.com Link: https://lkml.kernel.org/r/20200516080806.1459784-1-natechancellor@gmail.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/bcm/clk-bcm2835.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 802e488fd3c3..6e5d635f030f 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -1448,13 +1448,13 @@ static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman, return &clock->hw; }
-static struct clk *bcm2835_register_gate(struct bcm2835_cprman *cprman, +static struct clk_hw *bcm2835_register_gate(struct bcm2835_cprman *cprman, const struct bcm2835_gate_data *data) { - return clk_register_gate(cprman->dev, data->name, data->parent, - CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, - cprman->regs + data->ctl_reg, - CM_GATE_BIT, 0, &cprman->regs_lock); + return clk_hw_register_gate(cprman->dev, data->name, data->parent, + CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, + cprman->regs + data->ctl_reg, + CM_GATE_BIT, 0, &cprman->regs_lock); }
typedef struct clk_hw *(*bcm2835_clk_register)(struct bcm2835_cprman *cprman,
From: Jeffrey Hugo jeffrey.l.hugo@gmail.com
[ Upstream commit 3be60b564de49875e47974c37fabced893cd0931 ]
ufs_qcom_dump_dbg_regs() uses usleep_range, a sleeping function, but can be called from atomic context in the following flow:
ufshcd_intr -> ufshcd_sl_intr -> ufshcd_check_errors -> ufshcd_print_host_regs -> ufshcd_vops_dbg_register_dump -> ufs_qcom_dump_dbg_regs
This causes a boot crash on the Lenovo Miix 630 when the interrupt is handled on the idle thread.
Fix the issue by switching to udelay().
Link: https://lore.kernel.org/r/20200525204125.46171-1-jeffrey.l.hugo@gmail.com Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers") Reviewed-by: Bean Huo beanhuo@micron.com Reviewed-by: Avri Altman avri.altman@wdc.com Signed-off-by: Jeffrey Hugo jeffrey.l.hugo@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufs-qcom.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index 411ef60b2c14..c49e9f6c46f8 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -1546,11 +1546,11 @@ static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
/* sleep a bit intermittently as we are dumping too much data */ ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper); - usleep_range(1000, 1100); + udelay(1000); ufs_qcom_testbus_read(hba); - usleep_range(1000, 1100); + udelay(1000); ufs_qcom_print_unipro_testbus(hba); - usleep_range(1000, 1100); + udelay(1000); }
/**
From: Qian Cai cai@lca.pw
[ Upstream commit 0aca8a5575544bd21b3363058afb8f1e81505150 ]
kvmppc_pmd_alloc() and kvmppc_pte_alloc() allocate some memory but then pud_populate() and pmd_populate() will use __pa() to reference the newly allocated memory.
Since kmemleak is unable to track the physical memory resulting in false positives, silence those by using kmemleak_ignore().
unreferenced object 0xc000201c382a1000 (size 4096): comm "qemu-kvm", pid 124828, jiffies 4295733767 (age 341.250s) hex dump (first 32 bytes): c0 00 20 09 f4 60 03 87 c0 00 20 10 72 a0 03 87 .. ..`.... .r... c0 00 20 0e 13 a0 03 87 c0 00 20 1b dc c0 03 87 .. ....... ..... backtrace: [<000000004cc2790f>] kvmppc_create_pte+0x838/0xd20 [kvm_hv] kvmppc_pmd_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:366 (inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:590 [<00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv] [<00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv] [<0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv] [<000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv] [<00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm] [<00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm] [<000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm] [<0000000048155cd6>] ksys_ioctl+0xd8/0x130 [<0000000041ffeaa7>] sys_ioctl+0x28/0x40 [<000000004afc4310>] system_call_exception+0x114/0x1e0 [<00000000fb70a873>] system_call_common+0xf0/0x278 unreferenced object 0xc0002001f0c03900 (size 256): comm "qemu-kvm", pid 124830, jiffies 4295735235 (age 326.570s) hex dump (first 32 bytes): c0 00 20 10 fa a0 03 87 c0 00 20 10 fa a1 03 87 .. ....... ..... c0 00 20 10 fa a2 03 87 c0 00 20 10 fa a3 03 87 .. ....... ..... backtrace: [<0000000023f675b8>] kvmppc_create_pte+0x854/0xd20 [kvm_hv] kvmppc_pte_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:356 (inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:593 [<00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv] [<00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv] [<0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv] [<000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv] [<00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm] [<00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm] [<000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm] [<0000000048155cd6>] ksys_ioctl+0xd8/0x130 [<0000000041ffeaa7>] sys_ioctl+0x28/0x40 [<000000004afc4310>] system_call_exception+0x114/0x1e0 [<00000000fb70a873>] system_call_common+0xf0/0x278
Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Paul Mackerras paulus@ozlabs.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kvm/book3s_64_mmu_radix.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c index 2d415c36a61d..43b56f8f6beb 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_radix.c +++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c @@ -353,7 +353,13 @@ static struct kmem_cache *kvm_pmd_cache;
static pte_t *kvmppc_pte_alloc(void) { - return kmem_cache_alloc(kvm_pte_cache, GFP_KERNEL); + pte_t *pte; + + pte = kmem_cache_alloc(kvm_pte_cache, GFP_KERNEL); + /* pmd_populate() will only reference _pa(pte). */ + kmemleak_ignore(pte); + + return pte; }
static void kvmppc_pte_free(pte_t *ptep) @@ -363,7 +369,13 @@ static void kvmppc_pte_free(pte_t *ptep)
static pmd_t *kvmppc_pmd_alloc(void) { - return kmem_cache_alloc(kvm_pmd_cache, GFP_KERNEL); + pmd_t *pmd; + + pmd = kmem_cache_alloc(kvm_pmd_cache, GFP_KERNEL); + /* pud_populate() will only reference _pa(pmd). */ + kmemleak_ignore(pmd); + + return pmd; }
static void kvmppc_pmd_free(pmd_t *pmdp)
From: Qian Cai cai@lca.pw
[ Upstream commit ab8b65be183180c3eef405d449163964ecc4b571 ]
It is unsafe to traverse kvm->arch.spapr_tce_tables and stt->iommu_tables without the RCU read lock held. Also, add cond_resched_rcu() in places with the RCU read lock held that could take a while to finish.
arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1 no locks held by qemu-kvm/4265.
stack backtrace: CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ #2 Call Trace: [c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable) [c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164 [c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm] [c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm] [c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm] [c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm] [c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm] [c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330 [c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130 [c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0 [c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0 [c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200 [c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0 [c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280 [c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278
==== arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1 2 locks held by qemu-kvm/4264: #0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm] #1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
==== arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
==== arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Paul Mackerras paulus@ozlabs.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kvm/book3s_64_vio.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c index 5834db0a54c6..03b947429e4d 100644 --- a/arch/powerpc/kvm/book3s_64_vio.c +++ b/arch/powerpc/kvm/book3s_64_vio.c @@ -74,6 +74,7 @@ extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm, struct kvmppc_spapr_tce_iommu_table *stit, *tmp; struct iommu_table_group *table_group = NULL;
+ rcu_read_lock(); list_for_each_entry_rcu(stt, &kvm->arch.spapr_tce_tables, list) {
table_group = iommu_group_get_iommudata(grp); @@ -88,7 +89,9 @@ extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm, kref_put(&stit->kref, kvm_spapr_tce_liobn_put); } } + cond_resched_rcu(); } + rcu_read_unlock(); }
extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd, @@ -106,12 +109,14 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd, if (!f.file) return -EBADF;
+ rcu_read_lock(); list_for_each_entry_rcu(stt, &kvm->arch.spapr_tce_tables, list) { if (stt == f.file->private_data) { found = true; break; } } + rcu_read_unlock();
fdput(f);
@@ -144,6 +149,7 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd, if (!tbl) return -EINVAL;
+ rcu_read_lock(); list_for_each_entry_rcu(stit, &stt->iommu_tables, next) { if (tbl != stit->tbl) continue; @@ -151,14 +157,17 @@ extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd, if (!kref_get_unless_zero(&stit->kref)) { /* stit is being destroyed */ iommu_tce_table_put(tbl); + rcu_read_unlock(); return -ENOTTY; } /* * The table is already known to this KVM, we just increased * its KVM reference counter and can return. */ + rcu_read_unlock(); return 0; } + rcu_read_unlock();
stit = kzalloc(sizeof(*stit), GFP_KERNEL); if (!stit) { @@ -364,18 +373,19 @@ static long kvmppc_tce_validate(struct kvmppc_spapr_tce_table *stt, if (kvmppc_tce_to_ua(stt->kvm, tce, &ua)) return H_TOO_HARD;
+ rcu_read_lock(); list_for_each_entry_rcu(stit, &stt->iommu_tables, next) { unsigned long hpa = 0; struct mm_iommu_table_group_mem_t *mem; long shift = stit->tbl->it_page_shift;
mem = mm_iommu_lookup(stt->kvm->mm, ua, 1ULL << shift); - if (!mem) - return H_TOO_HARD; - - if (mm_iommu_ua_to_hpa(mem, ua, shift, &hpa)) + if (!mem || mm_iommu_ua_to_hpa(mem, ua, shift, &hpa)) { + rcu_read_unlock(); return H_TOO_HARD; + } } + rcu_read_unlock();
return H_SUCCESS; }
From: Chunyan Zhang chunyan.zhang@unisoc.com
[ Upstream commit c2f30986d418f26abefc2eec90ebf06716c970d2 ]
The function _sprd_pll_recalc_rate() defines return value to unsigned long, but it would return a negative value when malloc fail, changing to return its parent_rate makes more sense, since if the callback .recalc_rate() is not set, the framework returns the parent_rate as well.
Fixes: 3e37b005580b ("clk: sprd: add adjustable pll support") Signed-off-by: Chunyan Zhang chunyan.zhang@unisoc.com Link: https://lkml.kernel.org/r/20200519030036.1785-2-zhang.lyra@gmail.com Reviewed-by: Baolin Wang baolin.wang7@gmail.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/sprd/pll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c index 640270f51aa5..eb8862752c2b 100644 --- a/drivers/clk/sprd/pll.c +++ b/drivers/clk/sprd/pll.c @@ -105,7 +105,7 @@ static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL); if (!cfg) - return -ENOMEM; + return parent_rate;
for (i = 0; i < regs_num; i++) cfg[i] = sprd_pll_read(pll, i);
From: Eddie James eajames@linux.ibm.com
[ Upstream commit 2d491066ccd4286538450c227fc5094ceb04b494 ]
The latest specs for the AST2600 A1 chip include some different bit definitions for calculating the AHB clock divider. Implement these in order to get the correct AHB clock value in Linux.
Signed-off-by: Eddie James eajames@linux.ibm.com Link: https://lkml.kernel.org/r/20200408203616.4031-1-eajames@linux.ibm.com Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC") Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/clk-ast2600.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c index b1318e6b655b..675cab6fa781 100644 --- a/drivers/clk/clk-ast2600.c +++ b/drivers/clk/clk-ast2600.c @@ -599,14 +599,22 @@ static const u32 ast2600_a0_axi_ahb_div_table[] = { 2, 2, 3, 5, };
-static const u32 ast2600_a1_axi_ahb_div_table[] = { - 4, 6, 2, 4, +static const u32 ast2600_a1_axi_ahb_div0_tbl[] = { + 3, 2, 3, 4, +}; + +static const u32 ast2600_a1_axi_ahb_div1_tbl[] = { + 3, 4, 6, 8, +}; + +static const u32 ast2600_a1_axi_ahb200_tbl[] = { + 3, 4, 3, 4, 2, 2, 2, 2, };
static void __init aspeed_g6_cc(struct regmap *map) { struct clk_hw *hw; - u32 val, div, chip_id, axi_div, ahb_div; + u32 val, div, divbits, chip_id, axi_div, ahb_div;
clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
@@ -636,11 +644,22 @@ static void __init aspeed_g6_cc(struct regmap *map) else axi_div = 2;
+ divbits = (val >> 11) & 0x3; regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id); - if (chip_id & BIT(16)) - ahb_div = ast2600_a1_axi_ahb_div_table[(val >> 11) & 0x3]; - else + if (chip_id & BIT(16)) { + if (!divbits) { + ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3]; + if (val & BIT(16)) + ahb_div *= 2; + } else { + if (val & BIT(16)) + ahb_div = ast2600_a1_axi_ahb_div1_tbl[divbits]; + else + ahb_div = ast2600_a1_axi_ahb_div0_tbl[divbits]; + } + } else { ahb_div = ast2600_a0_axi_ahb_div_table[(val >> 11) & 0x3]; + }
hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, axi_div * ahb_div); aspeed_g6_clk_data->hws[ASPEED_CLK_AHB] = hw;
From: John Hubbard jhubbard@nvidia.com
[ Upstream commit 57343d51613227373759f5b0f2eede257fd4b82e ]
This fixes the case of get_user_pages_fast() returning a -errno. The result needs to be stored in a signed integer. And for safe signed/unsigned comparisons, it's best to keep everything signed. And get_user_pages_fast() also expects a signed value for number of pages to pin.
Therefore, change most relevant variables, from u32 to int. Leave "n" unsigned, for convenience in checking for overflow. And provide a WARN_ON_ONCE() and early return, if overflow occurs.
Also, as long as we're tidying up: rename the page array from page, to pages, in order to match the conventions used in most other call sites.
Fixes: 20ec628e8007e ("misc: xilinx_sdfec: Add ability to configure LDPC") Cc: Derek Kiernan derek.kiernan@xilinx.com Cc: Dragan Cvetic dragan.cvetic@xilinx.com Cc: Arnd Bergmann arnd@arndb.de Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Michal Simek michal.simek@xilinx.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: John Hubbard jhubbard@nvidia.com Link: https://lore.kernel.org/r/20200527012628.1100649-2-jhubbard@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/xilinx_sdfec.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c index 48ba7e02bed7..d4c14b617201 100644 --- a/drivers/misc/xilinx_sdfec.c +++ b/drivers/misc/xilinx_sdfec.c @@ -602,10 +602,10 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset, const u32 depth) { u32 reg = 0; - u32 res; - u32 n, i; + int res, i, nr_pages; + u32 n; u32 *addr = NULL; - struct page *page[MAX_NUM_PAGES]; + struct page *pages[MAX_NUM_PAGES];
/* * Writes that go beyond the length of @@ -622,15 +622,22 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset, if ((len * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE) n += 1;
- res = get_user_pages_fast((unsigned long)src_ptr, n, 0, page); - if (res < n) { - for (i = 0; i < res; i++) - put_page(page[i]); + if (WARN_ON_ONCE(n > INT_MAX)) + return -EINVAL; + + nr_pages = n; + + res = get_user_pages_fast((unsigned long)src_ptr, nr_pages, 0, pages); + if (res < nr_pages) { + if (res > 0) { + for (i = 0; i < res; i++) + put_page(pages[i]); + } return -EINVAL; }
- for (i = 0; i < n; i++) { - addr = kmap(page[i]); + for (i = 0; i < nr_pages; i++) { + addr = kmap(pages[i]); do { xsdfec_regwrite(xsdfec, base_addr + ((offset + reg) * @@ -639,7 +646,7 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset, reg++; } while ((reg < len) && ((reg * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE)); - put_page(page[i]); + put_page(pages[i]); } return reg; }
Hi Sasha,
Thank you for the patch.
-----Original Message----- From: Sasha Levin sashal@kernel.org Sent: Thursday 18 June 2020 02:15 To: linux-kernel@vger.kernel.org; stable@vger.kernel.org Cc: John Hubbard jhubbard@nvidia.com; Derek Kiernan dkiernan@xilinx.com; Dragan Cvetic draganc@xilinx.com; Arnd Bergmann arnd@arndb.de; Greg Kroah-Hartman gregkh@linuxfoundation.org; Michal Simek michals@xilinx.com; linux-arm- kernel@lists.infradead.org; Sasha Levin sashal@kernel.org Subject: [PATCH AUTOSEL 5.4 199/266] misc: xilinx-sdfec: improve get_user_pages_fast() error handling
From: John Hubbard jhubbard@nvidia.com
[ Upstream commit 57343d51613227373759f5b0f2eede257fd4b82e ]
This fixes the case of get_user_pages_fast() returning a -errno. The result needs to be stored in a signed integer. And for safe signed/unsigned comparisons, it's best to keep everything signed. And get_user_pages_fast() also expects a signed value for number of pages to pin.
Therefore, change most relevant variables, from u32 to int. Leave "n" unsigned, for convenience in checking for overflow. And provide a WARN_ON_ONCE() and early return, if overflow occurs.
Also, as long as we're tidying up: rename the page array from page, to pages, in order to match the conventions used in most other call sites.
Fixes: 20ec628e8007e ("misc: xilinx_sdfec: Add ability to configure LDPC") Cc: Derek Kiernan derek.kiernan@xilinx.com Cc: Dragan Cvetic dragan.cvetic@xilinx.com Cc: Arnd Bergmann arnd@arndb.de Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Michal Simek michal.simek@xilinx.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: John Hubbard jhubbard@nvidia.com Link: https://lore.kernel.org/r/20200527012628.1100649-2-jhubbard@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org
drivers/misc/xilinx_sdfec.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c index 48ba7e02bed7..d4c14b617201 100644 --- a/drivers/misc/xilinx_sdfec.c +++ b/drivers/misc/xilinx_sdfec.c @@ -602,10 +602,10 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset, const u32 depth) { u32 reg = 0;
- u32 res;
- u32 n, i;
- int res, i, nr_pages;
- u32 n; u32 *addr = NULL;
- struct page *page[MAX_NUM_PAGES];
struct page *pages[MAX_NUM_PAGES];
/*
- Writes that go beyond the length of
@@ -622,15 +622,22 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset, if ((len * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE) n += 1;
- res = get_user_pages_fast((unsigned long)src_ptr, n, 0, page);
- if (res < n) {
for (i = 0; i < res; i++)put_page(page[i]);
- if (WARN_ON_ONCE(n > INT_MAX))
return -EINVAL;- nr_pages = n;
- res = get_user_pages_fast((unsigned long)src_ptr, nr_pages, 0, pages);
- if (res < nr_pages) {
if (res > 0) {for (i = 0; i < res; i++)put_page(pages[i]);}
- for (i = 0; i < n; i++) {
addr = kmap(page[i]);
- for (i = 0; i < nr_pages; i++) {
addr = kmap(pages[i]);@@ -639,7 +646,7 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset, reg++; } while ((reg < len) && ((reg * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE));
put_page(page[i]);
put_page(pages[i]);}
2.25.1
Acked-by: Dragan Cvetic dragan.cvetic@xilinx.com
Regards Dragan
From: Dan Williams dan.j.williams@intel.com
[ Upstream commit 3234ac664a870e6ea69ae3a57d824cd7edbeacc5 ]
Close the hole of holding a mapping over kernel driver takeover event of a given address range.
Commit 90a545e98126 ("restrict /dev/mem to idle io memory ranges") introduced CONFIG_IO_STRICT_DEVMEM with the goal of protecting the kernel against scenarios where a /dev/mem user tramples memory that a kernel driver owns. However, this protection only prevents *new* read(), write() and mmap() requests. Established mappings prior to the driver calling request_mem_region() are left alone.
Especially with persistent memory, and the core kernel metadata that is stored there, there are plentiful scenarios for a /dev/mem user to violate the expectations of the driver and cause amplified damage.
Teach request_mem_region() to find and shoot down active /dev/mem mappings that it believes it has successfully claimed for the exclusive use of the driver. Effectively a driver call to request_mem_region() becomes a hole-punch on the /dev/mem device.
The typical usage of unmap_mapping_range() is part of truncate_pagecache() to punch a hole in a file, but in this case the implementation is only doing the "first half" of a hole punch. Namely it is just evacuating current established mappings of the "hole", and it relies on the fact that /dev/mem establishes mappings in terms of absolute physical address offsets. Once existing mmap users are invalidated they can attempt to re-establish the mapping, or attempt to continue issuing read(2) / write(2) to the invalidated extent, but they will then be subject to the CONFIG_IO_STRICT_DEVMEM checking that can block those subsequent accesses.
Cc: Arnd Bergmann arnd@arndb.de Cc: Ingo Molnar mingo@redhat.com Cc: Kees Cook keescook@chromium.org Cc: Matthew Wilcox willy@infradead.org Cc: Russell King linux@arm.linux.org.uk Cc: Andrew Morton akpm@linux-foundation.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Fixes: 90a545e98126 ("restrict /dev/mem to idle io memory ranges") Signed-off-by: Dan Williams dan.j.williams@intel.com Reviewed-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/159009507306.847224.8502634072429766747.stgit@dwil... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/mem.c | 101 ++++++++++++++++++++++++++++++++++++- include/linux/ioport.h | 6 +++ include/uapi/linux/magic.h | 1 + kernel/resource.c | 5 ++ 4 files changed, 111 insertions(+), 2 deletions(-)
diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 43dd0891ca1e..31cae88a730b 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -31,11 +31,15 @@ #include <linux/uio.h> #include <linux/uaccess.h> #include <linux/security.h> +#include <linux/pseudo_fs.h> +#include <uapi/linux/magic.h> +#include <linux/mount.h>
#ifdef CONFIG_IA64 # include <linux/efi.h> #endif
+#define DEVMEM_MINOR 1 #define DEVPORT_MINOR 4
static inline unsigned long size_inside_page(unsigned long start, @@ -805,12 +809,64 @@ static loff_t memory_lseek(struct file *file, loff_t offset, int orig) return ret; }
+static struct inode *devmem_inode; + +#ifdef CONFIG_IO_STRICT_DEVMEM +void revoke_devmem(struct resource *res) +{ + struct inode *inode = READ_ONCE(devmem_inode); + + /* + * Check that the initialization has completed. Losing the race + * is ok because it means drivers are claiming resources before + * the fs_initcall level of init and prevent /dev/mem from + * establishing mappings. + */ + if (!inode) + return; + + /* + * The expectation is that the driver has successfully marked + * the resource busy by this point, so devmem_is_allowed() + * should start returning false, however for performance this + * does not iterate the entire resource range. + */ + if (devmem_is_allowed(PHYS_PFN(res->start)) && + devmem_is_allowed(PHYS_PFN(res->end))) { + /* + * *cringe* iomem=relaxed says "go ahead, what's the + * worst that can happen?" + */ + return; + } + + unmap_mapping_range(inode->i_mapping, res->start, resource_size(res), 1); +} +#endif + static int open_port(struct inode *inode, struct file *filp) { + int rc; + if (!capable(CAP_SYS_RAWIO)) return -EPERM;
- return security_locked_down(LOCKDOWN_DEV_MEM); + rc = security_locked_down(LOCKDOWN_DEV_MEM); + if (rc) + return rc; + + if (iminor(inode) != DEVMEM_MINOR) + return 0; + + /* + * Use a unified address space to have a single point to manage + * revocations when drivers want to take over a /dev/mem mapped + * range. + */ + inode->i_mapping = devmem_inode->i_mapping; + filp->f_mapping = inode->i_mapping; + + return 0; }
#define zero_lseek null_lseek @@ -885,7 +941,7 @@ static const struct memdev { fmode_t fmode; } devlist[] = { #ifdef CONFIG_DEVMEM - [1] = { "mem", 0, &mem_fops, FMODE_UNSIGNED_OFFSET }, + [DEVMEM_MINOR] = { "mem", 0, &mem_fops, FMODE_UNSIGNED_OFFSET }, #endif #ifdef CONFIG_DEVKMEM [2] = { "kmem", 0, &kmem_fops, FMODE_UNSIGNED_OFFSET }, @@ -939,6 +995,45 @@ static char *mem_devnode(struct device *dev, umode_t *mode)
static struct class *mem_class;
+static int devmem_fs_init_fs_context(struct fs_context *fc) +{ + return init_pseudo(fc, DEVMEM_MAGIC) ? 0 : -ENOMEM; +} + +static struct file_system_type devmem_fs_type = { + .name = "devmem", + .owner = THIS_MODULE, + .init_fs_context = devmem_fs_init_fs_context, + .kill_sb = kill_anon_super, +}; + +static int devmem_init_inode(void) +{ + static struct vfsmount *devmem_vfs_mount; + static int devmem_fs_cnt; + struct inode *inode; + int rc; + + rc = simple_pin_fs(&devmem_fs_type, &devmem_vfs_mount, &devmem_fs_cnt); + if (rc < 0) { + pr_err("Cannot mount /dev/mem pseudo filesystem: %d\n", rc); + return rc; + } + + inode = alloc_anon_inode(devmem_vfs_mount->mnt_sb); + if (IS_ERR(inode)) { + rc = PTR_ERR(inode); + pr_err("Cannot allocate inode for /dev/mem: %d\n", rc); + simple_release_fs(&devmem_vfs_mount, &devmem_fs_cnt); + return rc; + } + + /* publish /dev/mem initialized */ + WRITE_ONCE(devmem_inode, inode); + + return 0; +} + static int __init chr_dev_init(void) { int minor; @@ -960,6 +1055,8 @@ static int __init chr_dev_init(void) */ if ((minor == DEVPORT_MINOR) && !arch_has_dev_port()) continue; + if ((minor == DEVMEM_MINOR) && devmem_init_inode() != 0) + continue;
device_create(mem_class, NULL, MKDEV(MEM_MAJOR, minor), NULL, devlist[minor].name); diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 7bddddfc76d6..fdc201d61460 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -300,5 +300,11 @@ struct resource *devm_request_free_mem_region(struct device *dev, struct resource *request_free_mem_region(struct resource *base, unsigned long size, const char *name);
+#ifdef CONFIG_IO_STRICT_DEVMEM +void revoke_devmem(struct resource *res); +#else +static inline void revoke_devmem(struct resource *res) { }; +#endif + #endif /* __ASSEMBLY__ */ #endif /* _LINUX_IOPORT_H */ diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h index 903cc2d2750b..84ae605c0643 100644 --- a/include/uapi/linux/magic.h +++ b/include/uapi/linux/magic.h @@ -93,6 +93,7 @@ #define BALLOON_KVM_MAGIC 0x13661366 #define ZSMALLOC_MAGIC 0x58295829 #define DMA_BUF_MAGIC 0x444d4142 /* "DMAB" */ +#define DEVMEM_MAGIC 0x454d444d /* "DMEM" */ #define Z3FOLD_MAGIC 0x33
#endif /* __LINUX_MAGIC_H__ */ diff --git a/kernel/resource.c b/kernel/resource.c index 76036a41143b..841737bbda9e 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -1126,6 +1126,7 @@ struct resource * __request_region(struct resource *parent, { DECLARE_WAITQUEUE(wait, current); struct resource *res = alloc_resource(GFP_KERNEL); + struct resource *orig_parent = parent;
if (!res) return NULL; @@ -1176,6 +1177,10 @@ struct resource * __request_region(struct resource *parent, break; } write_unlock(&resource_lock); + + if (res && orig_parent == &iomem_resource) + revoke_devmem(res); + return res; } EXPORT_SYMBOL(__request_region);
From: Fedor Tokarev ftokarev@gmail.com
[ Upstream commit 118917d696dc59fd3e1741012c2f9db2294bed6f ]
Fix off-by-one issues in 'rpc_ntop6': - 'snprintf' returns the number of characters which would have been written if enough space had been available, excluding the terminating null byte. Thus, a return value of 'sizeof(scopebuf)' means that the last character was dropped. - 'strcat' adds a terminating null byte to the string, thus if len == buflen, the null byte is written past the end of the buffer.
Signed-off-by: Fedor Tokarev ftokarev@gmail.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/addr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c index d024af4be85e..105d17af4abc 100644 --- a/net/sunrpc/addr.c +++ b/net/sunrpc/addr.c @@ -82,11 +82,11 @@ static size_t rpc_ntop6(const struct sockaddr *sap,
rc = snprintf(scopebuf, sizeof(scopebuf), "%c%u", IPV6_SCOPE_DELIMITER, sin6->sin6_scope_id); - if (unlikely((size_t)rc > sizeof(scopebuf))) + if (unlikely((size_t)rc >= sizeof(scopebuf))) return 0;
len += rc; - if (unlikely(len > buflen)) + if (unlikely(len >= buflen)) return 0;
strcat(buf, scopebuf);
From: Olga Kornievskaia olga.kornievskaia@gmail.com
[ Upstream commit 1c709b766e73e54d64b1dde1b7cfbcf25bcb15b9 ]
Fixes: 02a95dee8cf0 ("NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback") Signed-off-by: Olga Kornievskaia kolga@netapp.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index e257653f25ab..33c17c69aeaa 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -7870,7 +7870,7 @@ nfs4_bind_one_conn_to_session_done(struct rpc_task *task, void *calldata) }
static const struct rpc_call_ops nfs4_bind_one_conn_to_session_ops = { - .rpc_call_done = &nfs4_bind_one_conn_to_session_done, + .rpc_call_done = nfs4_bind_one_conn_to_session_done, };
/*
From: Marcos Scriven marcos@scriven.org
[ Upstream commit 0d14f06cd6657ba3446a5eb780672da487b068e7 ]
The AMD Matisse HD Audio & USB 3.0 devices advertise Function Level Reset support, but hang when an FLR is triggered.
To reproduce the problem, attach the device to a VM, then detach and try to attach again.
Rename the existing quirk_intel_no_flr(), which was not Intel-specific, to quirk_no_flr(), and apply it to prevent the use of FLR on these AMD devices.
Link: https://lore.kernel.org/r/CAAri2DpkcuQZYbT6XsALhx2e6vRqPHwtbjHYeiH7MNp4zmt1R... Signed-off-by: Marcos Scriven marcos@scriven.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 798e52051ecc..3f89ba7fe7fb 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5130,13 +5130,23 @@ static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap);
-/* FLR may cause some 82579 devices to hang */ -static void quirk_intel_no_flr(struct pci_dev *dev) +/* + * FLR may cause the following to devices to hang: + * + * AMD Starship/Matisse HD Audio Controller 0x1487 + * AMD Matisse USB 3.0 Host Controller 0x149c + * Intel 82579LM Gigabit Ethernet Controller 0x1502 + * Intel 82579V Gigabit Ethernet Controller 0x1503 + * + */ +static void quirk_no_flr(struct pci_dev *dev) { dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET; } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_intel_no_flr); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_intel_no_flr); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1487, quirk_no_flr); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c, quirk_no_flr); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
static void quirk_no_ext_tags(struct pci_dev *pdev) {
From: Kevin Buettner kevinb@redhat.com
[ Upstream commit 5727043c73fdfe04597971b5f3f4850d879c1f4f ]
The AMD Starship USB 3.0 host controller advertises Function Level Reset support, but it apparently doesn't work. Add a quirk to prevent use of FLR on this device.
Without this quirk, when attempting to assign (pass through) an AMD Starship USB 3.0 host controller to a guest OS, the system becomes increasingly unresponsive over the course of several minutes, eventually requiring a hard reset. Shortly after attempting to start the guest, I see these messages:
vfio-pci 0000:05:00.3: not ready 1023ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 2047ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 4095ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 8191ms after FLR; waiting
And then eventually:
vfio-pci 0000:05:00.3: not ready 65535ms after FLR; giving up INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.000 msecs perf: interrupt took too long (642744 > 2500), lowering kernel.perf_event_max_sample_rate to 1000 INFO: NMI handler (perf_event_nmi_handler) took too long to run: 82.270 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 680.608 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 100.952 msecs ... watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [qemu-system-x86:7487]
Tested on a Micro-Star International Co., Ltd. MS-7C59/Creator TRX40 motherboard with an AMD Ryzen Threadripper 3970X.
Link: https://lore.kernel.org/r/20200524003529.598434ff@f31-4.lan Signed-off-by: Kevin Buettner kevinb@redhat.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 3f89ba7fe7fb..de999f636a5f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5134,6 +5134,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap); * FLR may cause the following to devices to hang: * * AMD Starship/Matisse HD Audio Controller 0x1487 + * AMD Starship USB 3.0 Host Controller 0x148c * AMD Matisse USB 3.0 Host Controller 0x149c * Intel 82579LM Gigabit Ethernet Controller 0x1502 * Intel 82579V Gigabit Ethernet Controller 0x1503 @@ -5144,6 +5145,7 @@ static void quirk_no_flr(struct pci_dev *dev) dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET; } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1487, quirk_no_flr); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x148c, quirk_no_flr); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c, quirk_no_flr); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 8a325dd06f2358ea0888e4ff1c9ca4bc23bd53f3 ]
The problem in this code is that if kobject_add() fails, then it should call of_node_put(np) to drop the reference count. I've actually moved the of_node_get(np) later in the function to avoid needing to do clean up.
Fixes: 5b2c2f5a0ea3 ("of: overlay: add missing of_node_get() in __of_attach_node_sysfs") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Rob Herring robh@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/of/kobj.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c index c72eef988041..a32e60b024b8 100644 --- a/drivers/of/kobj.c +++ b/drivers/of/kobj.c @@ -134,8 +134,6 @@ int __of_attach_node_sysfs(struct device_node *np) if (!name) return -ENOMEM;
- of_node_get(np); - rc = kobject_add(&np->kobj, parent, "%s", name); kfree(name); if (rc) @@ -144,6 +142,7 @@ int __of_attach_node_sysfs(struct device_node *np) for_each_property_of_node(np, pp) __of_add_property_sysfs(np, pp);
+ of_node_get(np); return 0; }
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit e4f4ffa8a98c24a4ab482669b1e2b4cfce3f52f4 ]
This causes a build error with CONFIG_WALNUT because kb_cs and kb_data were removed in commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc").
ld.lld: error: undefined symbol: kb_cs
referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced by i8042-ppcio.h:28 (drivers/input/serio/i8042-ppcio.h:28) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a
ld.lld: error: undefined symbol: kb_data
referenced by i8042.c:309 (drivers/input/serio/i8042.c:309) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced by i8042-ppcio.h:33 (drivers/input/serio/i8042-ppcio.h:33) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced by i8042.c:319 (drivers/input/serio/i8042.c:319) input/serio/i8042.o:(__i8042_command) in archive drivers/built-in.a referenced 15 more times
Presumably since nobody has noticed this for the last 12 years, there is not anyone actually trying to use this driver so we can just remove this special walnut code and use the generic header so it builds for all configurations.
Fixes: 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc") Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Acked-by: Dmitry Torokhov dmitry.torokhov@gmail.com Link: https://lore.kernel.org/r/20200518181043.3363953-1-natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/serio/i8042-ppcio.h | 57 ------------------------------- drivers/input/serio/i8042.h | 2 -- 2 files changed, 59 deletions(-) delete mode 100644 drivers/input/serio/i8042-ppcio.h
diff --git a/drivers/input/serio/i8042-ppcio.h b/drivers/input/serio/i8042-ppcio.h deleted file mode 100644 index 391f94d9e47d..000000000000 --- a/drivers/input/serio/i8042-ppcio.h +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -#ifndef _I8042_PPCIO_H -#define _I8042_PPCIO_H - - -#if defined(CONFIG_WALNUT) - -#define I8042_KBD_IRQ 25 -#define I8042_AUX_IRQ 26 - -#define I8042_KBD_PHYS_DESC "walnutps2/serio0" -#define I8042_AUX_PHYS_DESC "walnutps2/serio1" -#define I8042_MUX_PHYS_DESC "walnutps2/serio%d" - -extern void *kb_cs; -extern void *kb_data; - -#define I8042_COMMAND_REG (*(int *)kb_cs) -#define I8042_DATA_REG (*(int *)kb_data) - -static inline int i8042_read_data(void) -{ - return readb(kb_data); -} - -static inline int i8042_read_status(void) -{ - return readb(kb_cs); -} - -static inline void i8042_write_data(int val) -{ - writeb(val, kb_data); -} - -static inline void i8042_write_command(int val) -{ - writeb(val, kb_cs); -} - -static inline int i8042_platform_init(void) -{ - i8042_reset = I8042_RESET_ALWAYS; - return 0; -} - -static inline void i8042_platform_exit(void) -{ -} - -#else - -#include "i8042-io.h" - -#endif - -#endif /* _I8042_PPCIO_H */ diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h index 38dc27ad3c18..eb376700dfff 100644 --- a/drivers/input/serio/i8042.h +++ b/drivers/input/serio/i8042.h @@ -17,8 +17,6 @@ #include "i8042-ip22io.h" #elif defined(CONFIG_SNI_RM) #include "i8042-snirm.h" -#elif defined(CONFIG_PPC) -#include "i8042-ppcio.h" #elif defined(CONFIG_SPARC) #include "i8042-sparcio.h" #elif defined(CONFIG_X86) || defined(CONFIG_IA64)
From: huhai huhai@tj.kylinos.cn
[ Upstream commit bcec081ecc940fc38730b29c743bbee661164161 ]
Signed-off-by: huhai huhai@tj.kylinos.cn Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200521072648.1254699-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/platforms/4xx/pci.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c index e6e2adcc7b64..c13d64c3b019 100644 --- a/arch/powerpc/platforms/4xx/pci.c +++ b/arch/powerpc/platforms/4xx/pci.c @@ -1242,7 +1242,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port) if (mbase == NULL) { printk(KERN_ERR "%pOF: Can't map internal config space !", port->node); - goto done; + return; }
while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA) @@ -1252,9 +1252,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port) } if (attempt) port->link = 1; -done: iounmap(mbase); - }
static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit bc84cff2c92ae5ccb2c37da73756e7174b1b430f ]
In some error handling paths, a call to 'iio_channel_get()' is not balanced by a corresponding call to 'iio_channel_release()'.
This can be achieved easily by using the devm_ variant of 'iio_channel_get()'.
This has the extra benefit to simplify the remove function.
Fixes: 19939860dcae ("extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Chanwoo Choi cw00.choi@samsung.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/extcon/extcon-adc-jack.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index ad02dc6747a4..0317b614b680 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -124,7 +124,7 @@ static int adc_jack_probe(struct platform_device *pdev) for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++); data->num_conditions = i;
- data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel); + data->chan = devm_iio_channel_get(&pdev->dev, pdata->consumer_channel); if (IS_ERR(data->chan)) return PTR_ERR(data->chan);
@@ -164,7 +164,6 @@ static int adc_jack_remove(struct platform_device *pdev)
free_irq(data->irq, data); cancel_work_sync(&data->handler.work); - iio_channel_release(data->chan);
return 0; }
From: Xiyu Yang xiyuyang19@fudan.edu.cn
[ Upstream commit 36124fb19f1ae68a500cd76a76d40c6e81bee346 ]
fsl_asrc_dma_hw_params() invokes dma_request_channel() or fsl_asrc_get_dma_channel(), which returns a reference of the specified dma_chan object to "pair->dma_chan[dir]" with increased refcnt.
The reference counting issue happens in one exception handling path of fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End, the function forgets to decrease the refcnt increased by dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt leak.
Fix this issue by calling dma_release_channel() when config DMA channel failed.
Signed-off-by: Xiyu Yang xiyuyang19@fudan.edu.cn Signed-off-by: Xin Tan tanxin.ctf@gmail.com Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/fsl/fsl_asrc_dma.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c index 01052a0808b0..5aee6b8366d2 100644 --- a/sound/soc/fsl/fsl_asrc_dma.c +++ b/sound/soc/fsl/fsl_asrc_dma.c @@ -241,6 +241,7 @@ static int fsl_asrc_dma_hw_params(struct snd_pcm_substream *substream, ret = dmaengine_slave_config(pair->dma_chan[dir], &config_be); if (ret) { dev_err(dev, "failed to config DMA channel for Back-End\n"); + dma_release_channel(pair->dma_chan[dir]); return ret; }
From: Qiushi Wu wu000273@umn.edu
[ Upstream commit aa8ba13cae3134b8ef1c1b6879f66372531da738 ]
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Thus, replace kfree() by kobject_put() to fix this issue. Previous commit "b8eb718348b8" fixed a similar problem.
Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Signed-off-by: Qiushi Wu wu000273@umn.edu Reviewed-by: Cornelia Huck cohuck@redhat.com Reviewed-by: Kirti Wankhede kwankhede@nvidia.com Signed-off-by: Alex Williamson alex.williamson@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vfio/mdev/mdev_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vfio/mdev/mdev_sysfs.c b/drivers/vfio/mdev/mdev_sysfs.c index 7570c7602ab4..f32c582611eb 100644 --- a/drivers/vfio/mdev/mdev_sysfs.c +++ b/drivers/vfio/mdev/mdev_sysfs.c @@ -110,7 +110,7 @@ static struct mdev_type *add_mdev_supported_type(struct mdev_parent *parent, "%s-%s", dev_driver_string(parent->dev), group->name); if (ret) { - kfree(type); + kobject_put(&type->kobj); return ERR_PTR(ret); }
From: Chuhong Yuan hslester96@gmail.com
[ Upstream commit c3b29bf6f166f6ed5f04f9c125477358e0e25df8 ]
rv3028_probe() misses a check for devm_regmap_init_i2c(). Add the missed check to fix it.
Fixes: e6e7376cfd7b ("rtc: rv3028: add new driver") Signed-off-by: Chuhong Yuan hslester96@gmail.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Link: https://lore.kernel.org/r/20200528103950.912353-1-hslester96@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rtc/rtc-rv3028.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/rtc/rtc-rv3028.c b/drivers/rtc/rtc-rv3028.c index 2b316661a578..bbdfebd70644 100644 --- a/drivers/rtc/rtc-rv3028.c +++ b/drivers/rtc/rtc-rv3028.c @@ -625,6 +625,8 @@ static int rv3028_probe(struct i2c_client *client) return -ENOMEM;
rv3028->regmap = devm_regmap_init_i2c(client, ®map_config); + if (IS_ERR(rv3028->regmap)) + return PTR_ERR(rv3028->regmap);
i2c_set_clientdata(client, rv3028);
From: Wei Yongjun weiyongjun1@huawei.com
[ Upstream commit 445aeeb569f8d7904f8cf80b7c6826bb651ef80e ]
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). So we should check whether the return value of devm_ioremap() is NULL instead of IS_ERR.
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller") Signed-off-by: Wei Yongjun weiyongjun1@huawei.com Signed-off-by: Jassi Brar jaswinder.singh@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mailbox/zynqmp-ipi-mailbox.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/mailbox/zynqmp-ipi-mailbox.c b/drivers/mailbox/zynqmp-ipi-mailbox.c index 86887c9a349a..f9cc674ba9b7 100644 --- a/drivers/mailbox/zynqmp-ipi-mailbox.c +++ b/drivers/mailbox/zynqmp-ipi-mailbox.c @@ -504,10 +504,9 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox, mchan->req_buf_size = resource_size(&res); mchan->req_buf = devm_ioremap(mdev, res.start, mchan->req_buf_size); - if (IS_ERR(mchan->req_buf)) { + if (!mchan->req_buf) { dev_err(mdev, "Unable to map IPI buffer I/O memory\n"); - ret = PTR_ERR(mchan->req_buf); - return ret; + return -ENOMEM; } } else if (ret != -ENODEV) { dev_err(mdev, "Unmatched resource %s, %d.\n", name, ret); @@ -520,10 +519,9 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox, mchan->resp_buf_size = resource_size(&res); mchan->resp_buf = devm_ioremap(mdev, res.start, mchan->resp_buf_size); - if (IS_ERR(mchan->resp_buf)) { + if (!mchan->resp_buf) { dev_err(mdev, "Unable to map IPI buffer I/O memory\n"); - ret = PTR_ERR(mchan->resp_buf); - return ret; + return -ENOMEM; } } else if (ret != -ENODEV) { dev_err(mdev, "Unmatched resource %s.\n", name); @@ -543,10 +541,9 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox, mchan->req_buf_size = resource_size(&res); mchan->req_buf = devm_ioremap(mdev, res.start, mchan->req_buf_size); - if (IS_ERR(mchan->req_buf)) { + if (!mchan->req_buf) { dev_err(mdev, "Unable to map IPI buffer I/O memory\n"); - ret = PTR_ERR(mchan->req_buf); - return ret; + return -ENOMEM; } } else if (ret != -ENODEV) { dev_err(mdev, "Unmatched resource %s.\n", name); @@ -559,10 +556,9 @@ static int zynqmp_ipi_mbox_probe(struct zynqmp_ipi_mbox *ipi_mbox, mchan->resp_buf_size = resource_size(&res); mchan->resp_buf = devm_ioremap(mdev, res.start, mchan->resp_buf_size); - if (IS_ERR(mchan->resp_buf)) { + if (!mchan->resp_buf) { dev_err(mdev, "Unable to map IPI buffer I/O memory\n"); - ret = PTR_ERR(mchan->resp_buf); - return ret; + return -ENOMEM; } } else if (ret != -ENODEV) { dev_err(mdev, "Unmatched resource %s.\n", name);
From: David Howells dhowells@redhat.com
[ Upstream commit 32f71aa497cfb23d37149c2ef16ad71fce2e45e2 ]
The user ID value isn't actually much use - and leaks a kernel pointer or a userspace value - so replace it with the call debug ID, which appears in trace points.
Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/rxrpc/proc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/rxrpc/proc.c b/net/rxrpc/proc.c index 8b179e3c802a..543afd9bd664 100644 --- a/net/rxrpc/proc.c +++ b/net/rxrpc/proc.c @@ -68,7 +68,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v) "Proto Local " " Remote " " SvID ConnID CallID End Use State Abort " - " UserID TxSeq TW RxSeq RW RxSerial RxTimo\n"); + " DebugId TxSeq TW RxSeq RW RxSerial RxTimo\n"); return 0; }
@@ -100,7 +100,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v) rx_hard_ack = READ_ONCE(call->rx_hard_ack); seq_printf(seq, "UDP %-47.47s %-47.47s %4x %08x %08x %s %3u" - " %-8.8s %08x %lx %08x %02x %08x %02x %08x %06lx\n", + " %-8.8s %08x %08x %08x %02x %08x %02x %08x %06lx\n", lbuff, rbuff, call->service_id, @@ -110,7 +110,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v) atomic_read(&call->usage), rxrpc_call_states[call->state], call->abort_code, - call->user_call_ID, + call->debug_id, tx_hard_ack, READ_ONCE(call->tx_top) - tx_hard_ack, rx_hard_ack, READ_ONCE(call->rx_top) - rx_hard_ack, call->rx_serial,
From: Stafford Horne shorne@gmail.com
[ Upstream commit 6bd140e14d9aaa734ec37985b8b20a96c0ece948 ]
Working on the OpenRISC glibc port I found that sometimes clone was working strange. That the tls data argument sent in r7 was always wrong. Further investigation revealed that the arguments were getting clobbered in the entry code. This patch removes the code that writes to the argument registers. This was likely due to some old code hanging around.
This patch fixes this up for clone and fork. This fork clobber is harmless but also useless so remove.
Signed-off-by: Stafford Horne shorne@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/openrisc/kernel/entry.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S index e4a78571f883..c6481cfc5220 100644 --- a/arch/openrisc/kernel/entry.S +++ b/arch/openrisc/kernel/entry.S @@ -1166,13 +1166,13 @@ ENTRY(__sys_clone) l.movhi r29,hi(sys_clone) l.ori r29,r29,lo(sys_clone) l.j _fork_save_extra_regs_and_call - l.addi r7,r1,0 + l.nop
ENTRY(__sys_fork) l.movhi r29,hi(sys_fork) l.ori r29,r29,lo(sys_fork) l.j _fork_save_extra_regs_and_call - l.addi r3,r1,0 + l.nop
ENTRY(sys_rt_sigreturn) l.jal _sys_rt_sigreturn
From: Ben Skeggs bskeggs@redhat.com
[ Upstream commit a1ef8bad506e4ffa0c57ac5f8cb99ab5cbc3b1fc ]
This is a SOR register, and not indexed by the bound head.
Fixes display not coming up on high-bandwidth HDMI displays under a number of configurations.
Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigm200.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigm200.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigm200.c index 9b16a08eb4d9..bf6d41fb0c9f 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigm200.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigm200.c @@ -27,10 +27,10 @@ void gm200_hdmi_scdc(struct nvkm_ior *ior, int head, u8 scdc) { struct nvkm_device *device = ior->disp->engine.subdev.device; - const u32 hoff = head * 0x800; + const u32 soff = nv50_ior_base(ior); const u32 ctrl = scdc & 0x3;
- nvkm_mask(device, 0x61c5bc + hoff, 0x00000003, ctrl); + nvkm_mask(device, 0x61c5bc + soff, 0x00000003, ctrl);
ior->tmds.high_speed = !!(scdc & 0x2); }
From: Luis Henriques lhenriques@suse.com
[ Upstream commit 878dabb64117406abd40977b87544d05bb3031fc ]
Similarly to commit 03f219041fdb ("ceph: check i_nlink while converting a file handle to dentry"), this fixes another corner case with name_to_handle_at/open_by_handle_at. The issue has been detected by xfstest generic/467, when doing:
- name_to_handle_at("/cephfs/myfile") - open("/cephfs/myfile") - unlink("/cephfs/myfile") - sync; sync; - drop caches - open_by_handle_at()
The call to open_by_handle_at should not fail because the file hasn't been deleted yet (only unlinked) and we do have a valid handle to it. -ESTALE shall be returned only if i_nlink is 0 *and* i_count is 1.
This patch also makes sure we have LINK caps before checking i_nlink.
Signed-off-by: Luis Henriques lhenriques@suse.com Reviewed-by: Jeff Layton jlayton@kernel.org Acked-by: Amir Goldstein amir73il@gmail.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/export.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/fs/ceph/export.c b/fs/ceph/export.c index 79dc06881e78..e088843a7734 100644 --- a/fs/ceph/export.c +++ b/fs/ceph/export.c @@ -172,9 +172,16 @@ struct inode *ceph_lookup_inode(struct super_block *sb, u64 ino) static struct dentry *__fh_to_dentry(struct super_block *sb, u64 ino) { struct inode *inode = __lookup_inode(sb, ino); + int err; + if (IS_ERR(inode)) return ERR_CAST(inode); - if (inode->i_nlink == 0) { + /* We need LINK caps to reliably check i_nlink */ + err = ceph_do_getattr(inode, CEPH_CAP_LINK_SHARED, false); + if (err) + return ERR_PTR(err); + /* -ESTALE if inode as been unlinked and no file is open */ + if ((inode->i_nlink == 0) && (atomic_read(&inode->i_count) == 1)) { iput(inode); return ERR_PTR(-ESTALE); }
From: "J. Bruce Fields" bfields@redhat.com
[ Upstream commit 027690c75e8fd91b60a634d31c4891a6e39d45bd ]
I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far.
The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning:
[ 45.163710] Unable to find swap-space signature [ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported. [ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program [ 51.011723] [ 51.013378] ====================================================== [ 51.013875] WARNING: possible circular locking dependency detected [ 51.014378] 5.2.0-rc2 #1 Not tainted [ 51.014672] ------------------------------------------------------ [ 51.015182] trinity-c2/886 is trying to acquire lock: [ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130 [ 51.016190] [ 51.016190] but task is already holding lock: [ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 [ 51.017266] [ 51.017266] which lock already depends on the new lock. [ 51.017266] [ 51.017909] [ 51.017909] the existing dependency chain (in reverse order) is: [ 51.018497] [ 51.018497] -> #1 (kn->count#43){++++}: [ 51.018956] __lock_acquire+0x7cf/0x1a20 [ 51.019317] lock_acquire+0x17d/0x390 [ 51.019658] __kernfs_remove+0x892/0xae0 [ 51.020020] kernfs_remove_by_name_ns+0x78/0x110 [ 51.020435] sysfs_remove_link+0x55/0xb0 [ 51.020832] sysfs_slab_add+0xc1/0x3e0 [ 51.021332] __kmem_cache_create+0x155/0x200 [ 51.021720] create_cache+0xf5/0x320 [ 51.022054] kmem_cache_create_usercopy+0x179/0x320 [ 51.022486] kmem_cache_create+0x1a/0x30 [ 51.022867] nfsd_reply_cache_init+0x278/0x560 [ 51.023266] nfsd_init_net+0x20f/0x5e0 [ 51.023623] ops_init+0xcb/0x4b0 [ 51.023928] setup_net+0x2fe/0x670 [ 51.024315] copy_net_ns+0x30a/0x3f0 [ 51.024653] create_new_namespaces+0x3c5/0x820 [ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240 [ 51.025881] ksys_unshare+0x506/0x9c0 [ 51.026381] __x64_sys_unshare+0x3a/0x50 [ 51.026937] do_syscall_64+0x110/0x10b0 [ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.028175] [ 51.028175] -> #0 (slab_mutex){+.+.}: [ 51.028817] validate_chain+0x1c51/0x2cc0 [ 51.029422] __lock_acquire+0x7cf/0x1a20 [ 51.029947] lock_acquire+0x17d/0x390 [ 51.030438] __mutex_lock+0x100/0xfa0 [ 51.030995] mutex_lock_nested+0x27/0x30 [ 51.031516] slab_attr_store+0xa2/0x130 [ 51.032020] sysfs_kf_write+0x11d/0x180 [ 51.032529] kernfs_fop_write+0x32a/0x500 [ 51.033056] do_loop_readv_writev+0x21d/0x310 [ 51.033627] do_iter_write+0x2e5/0x380 [ 51.034148] vfs_writev+0x170/0x310 [ 51.034616] do_pwritev+0x13e/0x160 [ 51.035100] __x64_sys_pwritev+0xa3/0x110 [ 51.035633] do_syscall_64+0x110/0x10b0 [ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.036924] [ 51.036924] other info that might help us debug this: [ 51.036924] [ 51.037876] Possible unsafe locking scenario: [ 51.037876] [ 51.038556] CPU0 CPU1 [ 51.039130] ---- ---- [ 51.039676] lock(kn->count#43); [ 51.040084] lock(slab_mutex); [ 51.040597] lock(kn->count#43); [ 51.041062] lock(slab_mutex); [ 51.041320] [ 51.041320] *** DEADLOCK *** [ 51.041320] [ 51.041793] 3 locks held by trinity-c2/886: [ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310 [ 51.042739] #1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500 [ 51.043400] #2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500
Reported-by: kernel test robot lkp@intel.com Fixes: 3ba75830ce17 "drc containerization" Signed-off-by: J. Bruce Fields bfields@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfsd/cache.h | 2 ++ fs/nfsd/netns.h | 1 - fs/nfsd/nfscache.c | 29 +++++++++++++++++------------ fs/nfsd/nfsctl.c | 6 ++++++ 4 files changed, 25 insertions(+), 13 deletions(-)
diff --git a/fs/nfsd/cache.h b/fs/nfsd/cache.h index 10ec5ecdf117..65c331f75e9c 100644 --- a/fs/nfsd/cache.h +++ b/fs/nfsd/cache.h @@ -78,6 +78,8 @@ enum { /* Checksum this amount of the request */ #define RC_CSUMLEN (256U)
+int nfsd_drc_slab_create(void); +void nfsd_drc_slab_free(void); int nfsd_reply_cache_init(struct nfsd_net *); void nfsd_reply_cache_shutdown(struct nfsd_net *); int nfsd_cache_lookup(struct svc_rqst *); diff --git a/fs/nfsd/netns.h b/fs/nfsd/netns.h index 9a4ef815fb8c..ed53e206a299 100644 --- a/fs/nfsd/netns.h +++ b/fs/nfsd/netns.h @@ -139,7 +139,6 @@ struct nfsd_net { * Duplicate reply cache */ struct nfsd_drc_bucket *drc_hashtbl; - struct kmem_cache *drc_slab;
/* max number of entries allowed in the cache */ unsigned int max_drc_entries; diff --git a/fs/nfsd/nfscache.c b/fs/nfsd/nfscache.c index 96352ab7bd81..0c10bfea039e 100644 --- a/fs/nfsd/nfscache.c +++ b/fs/nfsd/nfscache.c @@ -36,6 +36,8 @@ struct nfsd_drc_bucket { spinlock_t cache_lock; };
+static struct kmem_cache *drc_slab; + static int nfsd_cache_append(struct svc_rqst *rqstp, struct kvec *vec); static unsigned long nfsd_reply_cache_count(struct shrinker *shrink, struct shrink_control *sc); @@ -95,7 +97,7 @@ nfsd_reply_cache_alloc(struct svc_rqst *rqstp, __wsum csum, { struct svc_cacherep *rp;
- rp = kmem_cache_alloc(nn->drc_slab, GFP_KERNEL); + rp = kmem_cache_alloc(drc_slab, GFP_KERNEL); if (rp) { rp->c_state = RC_UNUSED; rp->c_type = RC_NOCACHE; @@ -129,7 +131,7 @@ nfsd_reply_cache_free_locked(struct nfsd_drc_bucket *b, struct svc_cacherep *rp, atomic_dec(&nn->num_drc_entries); nn->drc_mem_usage -= sizeof(*rp); } - kmem_cache_free(nn->drc_slab, rp); + kmem_cache_free(drc_slab, rp); }
static void @@ -141,6 +143,18 @@ nfsd_reply_cache_free(struct nfsd_drc_bucket *b, struct svc_cacherep *rp, spin_unlock(&b->cache_lock); }
+int nfsd_drc_slab_create(void) +{ + drc_slab = kmem_cache_create("nfsd_drc", + sizeof(struct svc_cacherep), 0, 0, NULL); + return drc_slab ? 0: -ENOMEM; +} + +void nfsd_drc_slab_free(void) +{ + kmem_cache_destroy(drc_slab); +} + int nfsd_reply_cache_init(struct nfsd_net *nn) { unsigned int hashsize; @@ -159,18 +173,13 @@ int nfsd_reply_cache_init(struct nfsd_net *nn) if (status) goto out_nomem;
- nn->drc_slab = kmem_cache_create("nfsd_drc", - sizeof(struct svc_cacherep), 0, 0, NULL); - if (!nn->drc_slab) - goto out_shrinker; - nn->drc_hashtbl = kcalloc(hashsize, sizeof(*nn->drc_hashtbl), GFP_KERNEL); if (!nn->drc_hashtbl) { nn->drc_hashtbl = vzalloc(array_size(hashsize, sizeof(*nn->drc_hashtbl))); if (!nn->drc_hashtbl) - goto out_slab; + goto out_shrinker; }
for (i = 0; i < hashsize; i++) { @@ -180,8 +189,6 @@ int nfsd_reply_cache_init(struct nfsd_net *nn) nn->drc_hashsize = hashsize;
return 0; -out_slab: - kmem_cache_destroy(nn->drc_slab); out_shrinker: unregister_shrinker(&nn->nfsd_reply_cache_shrinker); out_nomem: @@ -209,8 +216,6 @@ void nfsd_reply_cache_shutdown(struct nfsd_net *nn) nn->drc_hashtbl = NULL; nn->drc_hashsize = 0;
- kmem_cache_destroy(nn->drc_slab); - nn->drc_slab = NULL; }
/* diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index d77c5261c03c..159feae6af8b 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -1534,6 +1534,9 @@ static int __init init_nfsd(void) goto out_free_slabs; nfsd_fault_inject_init(); /* nfsd fault injection controls */ nfsd_stat_init(); /* Statistics */ + retval = nfsd_drc_slab_create(); + if (retval) + goto out_free_stat; nfsd_lockd_init(); /* lockd->nfsd callbacks */ retval = create_proc_exports_entry(); if (retval) @@ -1547,6 +1550,8 @@ static int __init init_nfsd(void) remove_proc_entry("fs/nfs", NULL); out_free_lockd: nfsd_lockd_shutdown(); + nfsd_drc_slab_free(); +out_free_stat: nfsd_stat_shutdown(); nfsd_fault_inject_cleanup(); nfsd4_exit_pnfs(); @@ -1561,6 +1566,7 @@ static int __init init_nfsd(void)
static void __exit exit_nfsd(void) { + nfsd_drc_slab_free(); remove_proc_entry("fs/nfs/exports", NULL); remove_proc_entry("fs/nfs", NULL); nfsd_stat_shutdown();
From: Bob Peterson rpeterso@redhat.com
[ Upstream commit ea22eee4e6027d8927099de344f7fff43c507ef9 ]
Before this patch, a simple typo accidentally added \n to the jid= string for lock_nolock mounts. This made it impossible to mount a gfs2 file system with a journal other than journal0. Thus:
mount -tgfs2 -o hostdata="jid=1" <device> <mount pt>
Resulted in: mount: wrong fs type, bad option, bad superblock on <device>
In most cases this is not a problem. However, for debugging and testing purposes we sometimes want to test the integrity of other journals. This patch removes the unnecessary \n and thus allows lock_nolock users to specify an alternate journal.
Signed-off-by: Bob Peterson rpeterso@redhat.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/ops_fstype.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 18daf494abab..c26c864590cc 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -911,7 +911,7 @@ static int init_per_node(struct gfs2_sbd *sdp, int undo) }
static const match_table_t nolock_tokens = { - { Opt_jid, "jid=%d\n", }, + { Opt_jid, "jid=%d", }, { Opt_err, NULL }, };
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 56230d956739b9cb1cbde439d76227d77979a04d ]
Check permission before opening a real file.
ovl_path_open() is used by readdir and copy-up routines.
ovl_permission() theoretically already checked copy up permissions, but it doesn't hurt to re-do these checks during the actual copy-up.
For directory reading ovl_permission() only checks access to topmost underlying layer. Readdir on a merged directory accesses layers below the topmost one as well. Permission wasn't checked for these layers.
Note: modifying ovl_permission() to perform this check would be far more complex and hence more bug prone. The result is less precise permissions returned in access(2). If this turns out to be an issue, we can revisit this bug.
Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/overlayfs/util.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index f5678a3f8350..eb325322a893 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -475,7 +475,32 @@ bool ovl_is_whiteout(struct dentry *dentry)
struct file *ovl_path_open(struct path *path, int flags) { - return dentry_open(path, flags | O_NOATIME, current_cred()); + struct inode *inode = d_inode(path->dentry); + int err, acc_mode; + + if (flags & ~(O_ACCMODE | O_LARGEFILE)) + BUG(); + + switch (flags & O_ACCMODE) { + case O_RDONLY: + acc_mode = MAY_READ; + break; + case O_WRONLY: + acc_mode = MAY_WRITE; + break; + default: + BUG(); + } + + err = inode_permission(inode, acc_mode | MAY_OPEN); + if (err) + return ERR_PTR(err); + + /* O_NOATIME is an optimization, don't fail if not permitted */ + if (inode_owner_or_capable(inode)) + flags |= O_NOATIME; + + return dentry_open(path, flags, current_cred()); }
/* Caller should hold ovl_inode->lock */
On Thu, 18 Jun 2020 at 06:51, Sasha Levin sashal@kernel.org wrote:
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 56230d956739b9cb1cbde439d76227d77979a04d ]
Check permission before opening a real file.
ovl_path_open() is used by readdir and copy-up routines.
ovl_permission() theoretically already checked copy up permissions, but it doesn't hurt to re-do these checks during the actual copy-up.
For directory reading ovl_permission() only checks access to topmost underlying layer. Readdir on a merged directory accesses layers below the topmost one as well. Permission wasn't checked for these layers.
Note: modifying ovl_permission() to perform this check would be far more complex and hence more bug prone. The result is less precise permissions returned in access(2). If this turns out to be an issue, we can revisit this bug.
Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
fs/overlayfs/util.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c index f5678a3f8350..eb325322a893 100644 --- a/fs/overlayfs/util.c +++ b/fs/overlayfs/util.c @@ -475,7 +475,32 @@ bool ovl_is_whiteout(struct dentry *dentry)
struct file *ovl_path_open(struct path *path, int flags) {
return dentsteps to reproduce:
- cd /opt/ltp - ./runltp -s execveat03ry_open(path, flags | O_NOATIME, current_cred());
struct inode *inode = d_inode(path->dentry);int err, acc_mode;if (flags & ~(O_ACCMODE | O_LARGEFILE))BUG();
This BUG: triggered on stable-rc 5.7, 5.4, 4.19 and 4.14 on arm64 architecture.
steps to reproduce: - cd /opt/ltp - ./runltp -s execveat03
[ 461.024389] ------------[ cut here ]------------ [ 461.029029] kernel BUG at fs/overlayfs/util.c:482! [ 461.033832] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 461.039328] Modules linked in: overlay rfkill tda998x drm_kms_helper drm crct10dif_ce fuse [ 461.047637] CPU: 2 PID: 15049 Comm: execveat03 Not tainted 5.4.49-rc1-00549-g1d94fa9fbd5f #1 [ 461.056093] Hardware name: ARM Juno development board (r2) (DT) [ 461.062026] pstate: 60000005 (nZCv daif -PAN -UAO) [ 461.066879] pc : ovl_path_open+0xc4/0xc8 [overlay] [ 461.071723] lr : ovl_path_open+0x2c/0xc8 [overlay] [ 461.076521] sp : ffff0008d9d578d0 [ 461.079841] x29: ffff0008d9d578d0 x28: ffff00090821186c [ 461.085167] x27: ffff000908211800 x26: ffff000902fc7000 [ 461.090493] x25: ffffa0000956e800 x24: ffff000902fc7540 [ 461.095818] x23: ffff0008d9d57b80 x22: ffff00091149c880 [ 461.101143] x21: ffff0008d9d57b80 x20: ffff0008dd24cb10 [ 461.106467] x19: 0000000000004000 x18: 0000000000000000 [ 461.111791] x17: 0000000000000000 x16: 0000000000000000 [ 461.117114] x15: 0000000000000000 x14: ffffa00010395a3c [ 461.122439] x13: ffffa00010394ff0 x12: ffff80011baea816 [ 461.127763] x11: 1fffe0011baea815 x10: ffff80011baea815 [ 461.133087] x9 : dfffa00000000000 x8 : 0000000000000001 [ 461.138411] x7 : ffff0008dd7540a8 x6 : 00000000f1f1f1f1 [ 461.143735] x5 : 00000000f3000000 x4 : 000000000000002d [ 461.149059] x3 : dfffa00000000000 x2 : 0000000000000007 [ 461.154383] x1 : 0000000000004000 x0 : 0000000000000000 [ 461.159706] Call trace: [ 461.162201] ovl_path_open+0xc4/0xc8 [overlay] [ 461.166697] ovl_check_d_type_supported+0x98/0x178 [overlay] [ 461.172410] ovl_fill_super+0x8b4/0x1c78 [overlay] [ 461.177215] mount_nodev+0x4c/0xb8 [ 461.180665] ovl_mount+0x18/0x20 [overlay] [ 461.184772] legacy_get_tree+0x70/0xb8 [ 461.188531] vfs_get_tree+0x48/0x158 [ 461.192116] do_mount+0x6f8/0xb38 [ 461.195438] ksys_mount+0x8c/0xe8 [ 461.198762] __arm64_sys_mount+0x64/0x80 [ 461.202697] el0_svc_common.constprop.0+0xa0/0x1d0 [ 461.207500] el0_svc_handler+0x34/0x98 [ 461.211256] el0_svc+0x8/0xc [ 461.214150] Code: f94013f5 a8c37bfd d65f03c0 d4210000 (d4210000) [ 461.220258] ---[ end trace 13147ca9b270cd0f ]--- [ 461.224884] note: execveat03[15049] exited with preempt_count 1 [ 461.233327] ------------[ cut here ]------------ [ 461.237984] WARNING: CPU: 2 PID: 0 at kernel/rcu/tree.c:569 rcu_idle_enter+0xc4/0xd0 [ 461.245742] Modules linked in: overlay rfkill tda998x drm_kms_helper drm crct10dif_ce fuse [ 461.254052] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.4.49-rc1-00549-g1d94fa9fbd5f #1 [ 461.263465] Hardware name: ARM Juno development board (r2) (DT) [ 461.269397] pstate: 20000085 (nzCv daIf -PAN -UAO) [ 461.274200] pc : rcu_idle_enter+0xc4/0xd0 [ 461.278224] lr : rcu_idle_enter+0x30/0xd0 [ 461.282397] sp : ffff000935577e90 [ 461.285715] x29: ffff000935577e90 x28: 0000000000000000 [ 461.291202] x27: ffff00091330b800 x26: ffffa0001309e220 Broadcast message from systemd-jo[ 461.296528] x25: ffff00093554ba00 x24: 1fffe00126aaefe4 urnald@juno (Tue 2020-06-23 03:3[ 461.304710] x23: ffffa00012227c38 x22: ffffa0001309e1f8 3:27 UTC): [ 461.312810] x21: ffff0009366edc98 x20: ffffa00012231bc0 [ 461.319253] x19: ffff0009366edbc0 x18: 0000000000000000 [ 461.324576] x17: 0000000000000000 x16: 0000000000000000 [ 461.329973] x15: 0000000000000000 x14: ffffa0001009d8c0 [ 461.335298] x13: ffffa00010395afc x12: ffff800126cddb24 [ 461.340784] x11: 1fffe00126cddb23 x10: ffff800126cddb23 kernel[310]: [ 461.033832] Inter[ 461.346109] x9 : dfffa00000000000 x8 : 0000000000000001 nal error: Oops - BUG: 0 [#1] PR[ 461.354293] x7 : ffff0009366ed91b x6 : ffff0009366ed918 EEMPT SMP [ 461.362392] x5 : 00007ffed93224dd x4 : 000000000000002d [ 461.368747] x3 : dfffa00000000000 x2 : 0000000000000007 [ 461.374071] x1 : 4000000000000002 x0 : 4000000000000000 [ 461.379468] Call trace: [ 461.381922] rcu_idle_enter+0xc4/0xd0 [ 461.385755] do_idle+0x27c/0x320 exit01 1 TPASS : exit() t[ 461.388992] cpu_startup_entry+0x20/0x40 est PASSED[ 461.395788] secondary_start_kernel+0x250/0x2b8 [ 461.401184] ---[ end trace 13147ca9b270cd10 ]---
test link, https://lkft.validation.linaro.org/scheduler/job/1516380#L3866
metadata: git branch: linux-5.4.y git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git commit: 1d94fa9fbd5f0a775217d4180270dae8cede3f92 git describe: v5.4.47-549-g1d94fa9fbd5f make_kernelversion: 5.4.49-rc1 kernel-config: https://builds.tuxbuild.com/-hEoWZbVgbGrYjKHXXPiuQ/kernel.config build-url: https://gitlab.com/Linaro/lkft/kernel-runs/-/pipelines/158927561
From: Qiushi Wu wu000273@umn.edu
[ Upstream commit 0267ffce562c8bbf9b57ebe0e38445ad04972890 ]
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object.
Link: https://lore.kernel.org/r/20200528201353.14849-1-wu000273@umn.edu Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Qiushi Wu wu000273@umn.edu Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/iscsi_boot_sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/iscsi_boot_sysfs.c b/drivers/scsi/iscsi_boot_sysfs.c index e4857b728033..a64abe38db2d 100644 --- a/drivers/scsi/iscsi_boot_sysfs.c +++ b/drivers/scsi/iscsi_boot_sysfs.c @@ -352,7 +352,7 @@ iscsi_boot_create_kobj(struct iscsi_boot_kset *boot_kset, boot_kobj->kobj.kset = boot_kset->kset; if (kobject_init_and_add(&boot_kobj->kobj, &iscsi_boot_ktype, NULL, name, index)) { - kfree(boot_kobj); + kobject_put(&boot_kobj->kobj); return NULL; } boot_kobj->data = data;
From: Can Guo cang@codeaurora.org
[ Upstream commit be32acff43800c87dc5c707f5d47cc607b76b653 ]
Urgent bkops level is used to compare against actual bkops status read from UFS device. Urgent bkops level is set during initialization and might be updated in exception event handler during runtime. But it should not be updated to the actual bkops status every time when auto bkops is toggled. Otherwise, if urgent bkops level is updated to 0, auto bkops shall always be kept enabled.
Link: https://lore.kernel.org/r/1590632686-17866-1-git-send-email-cang@codeaurora.... Fixes: 24366c2afbb0 ("scsi: ufs: Recheck bkops level if bkops is disabled") Reviewed-by: Stanley Chu stanley.chu@mediatek.com Signed-off-by: Can Guo cang@codeaurora.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index bc73181b0405..2b6853c7375c 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -5101,7 +5101,6 @@ static int ufshcd_bkops_ctrl(struct ufs_hba *hba, err = ufshcd_enable_auto_bkops(hba); else err = ufshcd_disable_auto_bkops(hba); - hba->urgent_bkops_lvl = curr_status; out: return err; }
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 9eb728321286c4b31e964d2377fca2368526d408 ]
When 'pinctrl_register()' has been turned into 'devm_pinctrl_register()', an error handling path has not been updated.
Axe a now unneeded 'pinctrl_unregister()'.
Fixes: e55e025d1687 ("pinctrl: imxl: Use devm_pinctrl_register() for pinctrl registration") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/20200530201952.585798-1-christophe.jaillet@wanadoo... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/freescale/pinctrl-imx1-core.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx1-core.c b/drivers/pinctrl/freescale/pinctrl-imx1-core.c index 7e29e3fecdb2..5bb183c0ce31 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx1-core.c +++ b/drivers/pinctrl/freescale/pinctrl-imx1-core.c @@ -638,7 +638,6 @@ int imx1_pinctrl_core_probe(struct platform_device *pdev,
ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); if (ret) { - pinctrl_unregister(ipctl->pctl); dev_err(&pdev->dev, "Failed to populate subdevices\n"); return ret; }
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 11d8da5cabf7c6c3263ba2cd9c00260395867048 ]
'pinctrl_unregister()' should not be called to undo 'devm_pinctrl_register_and_init()', it is already handled by the framework.
This simplifies the error handling paths of the probe function. The 'imx_free_resources()' can be removed as well.
Fixes: a51c158bf0f7 ("pinctrl: imx: use radix trees for groups and functions") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Reviewed-by: Dong Aisheng aisheng.dong@nxp.com Link: https://lore.kernel.org/r/20200530204955.588962-1-christophe.jaillet@wanadoo... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/freescale/pinctrl-imx.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 9f42036c5fbb..1f81569c7ae3 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -774,16 +774,6 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev, return 0; }
-/* - * imx_free_resources() - free memory used by this driver - * @info: info driver instance - */ -static void imx_free_resources(struct imx_pinctrl *ipctl) -{ - if (ipctl->pctl) - pinctrl_unregister(ipctl->pctl); -} - int imx_pinctrl_probe(struct platform_device *pdev, const struct imx_pinctrl_soc_info *info) { @@ -874,23 +864,18 @@ int imx_pinctrl_probe(struct platform_device *pdev, &ipctl->pctl); if (ret) { dev_err(&pdev->dev, "could not register IMX pinctrl driver\n"); - goto free; + return ret; }
ret = imx_pinctrl_probe_dt(pdev, ipctl); if (ret) { dev_err(&pdev->dev, "fail to probe dt properties\n"); - goto free; + return ret; }
dev_info(&pdev->dev, "initialized IMX pinctrl driver\n");
return pinctrl_enable(ipctl->pctl); - -free: - imx_free_resources(ipctl); - - return ret; }
static int __maybe_unused imx_pinctrl_suspend(struct device *dev)
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit ba403242615c2c99e27af7984b1650771a2cc2c9 ]
Use 'devm_of_iomap()' instead 'of_iomap()' to avoid a resource leak in case of error.
Update the error handling code accordingly.
Fixes: 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support") Suggested-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Reviewed-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/20200602200626.677981-1-christophe.jaillet@wanadoo... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/freescale/pinctrl-imx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 1f81569c7ae3..cb7e0f08d2cf 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -824,12 +824,13 @@ int imx_pinctrl_probe(struct platform_device *pdev, return -EINVAL; }
- ipctl->input_sel_base = of_iomap(np, 0); + ipctl->input_sel_base = devm_of_iomap(&pdev->dev, np, + 0, NULL); of_node_put(np); - if (!ipctl->input_sel_base) { + if (IS_ERR(ipctl->input_sel_base)) { dev_err(&pdev->dev, "iomuxc input select base address not found\n"); - return -ENOMEM; + return PTR_ERR(ipctl->input_sel_base); } } }
From: "J. Bruce Fields" bfields@redhat.com
[ Upstream commit c25bf185e57213b54ea0d632ac04907310993433 ]
This can only happen if there's a bug somewhere, so let's make it a WARN not a printk. Also, I think it's safest to ignore the corruption rather than trying to fix it by removing a cache entry.
Signed-off-by: J. Bruce Fields bfields@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfsd/nfscache.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/nfsd/nfscache.c b/fs/nfsd/nfscache.c index 0c10bfea039e..4a258065188e 100644 --- a/fs/nfsd/nfscache.c +++ b/fs/nfsd/nfscache.c @@ -469,8 +469,7 @@ nfsd_cache_lookup(struct svc_rqst *rqstp) rtn = RC_REPLY; break; default: - printk(KERN_WARNING "nfsd: bad repcache type %d\n", rp->c_type); - nfsd_reply_cache_free_locked(b, rp, nn); + WARN_ONCE(1, "nfsd: bad repcache type %d\n", rp->c_type); }
goto out;
From: Nicholas Kazlauskas nicholas.kazlauskas@amd.com
[ Upstream commit a24eaa5c51255b344d5a321f1eeb3205f2775498 ]
[Why] Whenever we switch between tiled formats without also switching pixel formats or doing anything else that recreates the DC plane state we can run into underflow or hangs since we're not updating the DML parameters before committing to the hardware.
[How] If the update type is FULL then call validate_bandwidth again to update the DML parmeters before committing the state.
This is basically just a workaround and protective measure against update types being added DC where we could run into this issue in the future.
We can only fully validate the state in advance before applying it to the hardware if we recreate all the plane and stream states since we can't modify what's currently in use.
The next step is to update DM to ensure that we're creating the plane and stream states for whatever could potentially be a full update in DC to pre-emptively recreate the state for DC global validation.
The workaround can stay until this has been fixed in DM.
Signed-off-by: Nicholas Kazlauskas nicholas.kazlauskas@amd.com Reviewed-by: Hersen Wu hersenxs.wu@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 2028dc017f7a..b95a58aa82d9 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -2230,6 +2230,12 @@ void dc_commit_updates_for_stream(struct dc *dc,
copy_stream_update_to_stream(dc, context, stream, stream_update);
+ if (!dc->res_pool->funcs->validate_bandwidth(dc, context, false)) { + DC_ERROR("Mode validation failed for stream update!\n"); + dc_release_state(context); + return; + } + commit_planes_for_stream( dc, srf_updates,
From: Tero Kristo t-kristo@ti.com
[ Upstream commit 281c377872ff5d15d80df25fc4df02d2676c7cde ]
The current implementation of the multiple accelerator core support for OMAP SHA does not work properly. It always picks up the first probed accelerator core if this is available, and rest of the book keeping also gets confused if there are two cores available. Add proper load balancing support for SHA, and also fix any bugs related to the multicore support while doing it.
Signed-off-by: Tero Kristo t-kristo@ti.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/omap-sham.c | 64 ++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 33 deletions(-)
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c index ac80bc6af093..aba5db3c0588 100644 --- a/drivers/crypto/omap-sham.c +++ b/drivers/crypto/omap-sham.c @@ -165,8 +165,6 @@ struct omap_sham_hmac_ctx { };
struct omap_sham_ctx { - struct omap_sham_dev *dd; - unsigned long flags;
/* fallback stuff */ @@ -918,27 +916,35 @@ static int omap_sham_update_dma_stop(struct omap_sham_dev *dd) return 0; }
+struct omap_sham_dev *omap_sham_find_dev(struct omap_sham_reqctx *ctx) +{ + struct omap_sham_dev *dd; + + if (ctx->dd) + return ctx->dd; + + spin_lock_bh(&sham.lock); + dd = list_first_entry(&sham.dev_list, struct omap_sham_dev, list); + list_move_tail(&dd->list, &sham.dev_list); + ctx->dd = dd; + spin_unlock_bh(&sham.lock); + + return dd; +} + static int omap_sham_init(struct ahash_request *req) { struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); struct omap_sham_ctx *tctx = crypto_ahash_ctx(tfm); struct omap_sham_reqctx *ctx = ahash_request_ctx(req); - struct omap_sham_dev *dd = NULL, *tmp; + struct omap_sham_dev *dd; int bs = 0;
- spin_lock_bh(&sham.lock); - if (!tctx->dd) { - list_for_each_entry(tmp, &sham.dev_list, list) { - dd = tmp; - break; - } - tctx->dd = dd; - } else { - dd = tctx->dd; - } - spin_unlock_bh(&sham.lock); + ctx->dd = NULL;
- ctx->dd = dd; + dd = omap_sham_find_dev(ctx); + if (!dd) + return -ENODEV;
ctx->flags = 0;
@@ -1187,8 +1193,7 @@ static int omap_sham_handle_queue(struct omap_sham_dev *dd, static int omap_sham_enqueue(struct ahash_request *req, unsigned int op) { struct omap_sham_reqctx *ctx = ahash_request_ctx(req); - struct omap_sham_ctx *tctx = crypto_tfm_ctx(req->base.tfm); - struct omap_sham_dev *dd = tctx->dd; + struct omap_sham_dev *dd = ctx->dd;
ctx->op = op;
@@ -1198,7 +1203,7 @@ static int omap_sham_enqueue(struct ahash_request *req, unsigned int op) static int omap_sham_update(struct ahash_request *req) { struct omap_sham_reqctx *ctx = ahash_request_ctx(req); - struct omap_sham_dev *dd = ctx->dd; + struct omap_sham_dev *dd = omap_sham_find_dev(ctx);
if (!req->nbytes) return 0; @@ -1302,21 +1307,8 @@ static int omap_sham_setkey(struct crypto_ahash *tfm, const u8 *key, struct omap_sham_hmac_ctx *bctx = tctx->base; int bs = crypto_shash_blocksize(bctx->shash); int ds = crypto_shash_digestsize(bctx->shash); - struct omap_sham_dev *dd = NULL, *tmp; int err, i;
- spin_lock_bh(&sham.lock); - if (!tctx->dd) { - list_for_each_entry(tmp, &sham.dev_list, list) { - dd = tmp; - break; - } - tctx->dd = dd; - } else { - dd = tctx->dd; - } - spin_unlock_bh(&sham.lock); - err = crypto_shash_setkey(tctx->fallback, key, keylen); if (err) return err; @@ -1334,7 +1326,7 @@ static int omap_sham_setkey(struct crypto_ahash *tfm, const u8 *key,
memset(bctx->ipad + keylen, 0, bs - keylen);
- if (!test_bit(FLAGS_AUTO_XOR, &dd->flags)) { + if (!test_bit(FLAGS_AUTO_XOR, &sham.flags)) { memcpy(bctx->opad, bctx->ipad, bs);
for (i = 0; i < bs; i++) { @@ -2136,6 +2128,7 @@ static int omap_sham_probe(struct platform_device *pdev) }
dd->flags |= dd->pdata->flags; + sham.flags |= dd->pdata->flags;
pm_runtime_use_autosuspend(dev); pm_runtime_set_autosuspend_delay(dev, DEFAULT_AUTOSUSPEND_DELAY); @@ -2163,6 +2156,9 @@ static int omap_sham_probe(struct platform_device *pdev) spin_unlock(&sham.lock);
for (i = 0; i < dd->pdata->algs_info_size; i++) { + if (dd->pdata->algs_info[i].registered) + break; + for (j = 0; j < dd->pdata->algs_info[i].size; j++) { struct ahash_alg *alg;
@@ -2214,9 +2210,11 @@ static int omap_sham_remove(struct platform_device *pdev) list_del(&dd->list); spin_unlock(&sham.lock); for (i = dd->pdata->algs_info_size - 1; i >= 0; i--) - for (j = dd->pdata->algs_info[i].registered - 1; j >= 0; j--) + for (j = dd->pdata->algs_info[i].registered - 1; j >= 0; j--) { crypto_unregister_ahash( &dd->pdata->algs_info[i].algs_list[j]); + dd->pdata->algs_info[i].registered--; + } tasklet_kill(&dd->done_task); pm_runtime_disable(&pdev->dev);
From: Jiri Benc jbenc@redhat.com
[ Upstream commit 9d149045b3c0e44c049cdbce8a64e19415290017 ]
If the geneve interface is in collect_md (external) mode, it can't send any packets submitted directly to its net interface, as such packets won't have metadata attached. This is expected.
However, the kernel itself sends some packets to the interface, most notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong, as tunnel metadata can be specified in routing table (although technically, that has never worked for IPv6, but hopefully will be fixed eventually) and then the interface must correctly participate in IPv6 housekeeping.
The problem is that any such attempt increases the tx_error counter. Just bringing up a geneve interface with IPv6 enabled is enough to see a number of tx_errors. That causes confusion among users, prompting them to find a network error where there is none.
Change the counter used to tx_dropped. That better conveys the meaning (there's nothing wrong going on, just some packets are getting dropped) and hopefully will make admins panic less.
Signed-off-by: Jiri Benc jbenc@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/geneve.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index aa101f72d405..cac75c7d1d01 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -987,9 +987,10 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev) if (geneve->collect_md) { info = skb_tunnel_info(skb); if (unlikely(!info || !(info->mode & IP_TUNNEL_INFO_TX))) { - err = -EINVAL; netdev_dbg(dev, "no tunnel metadata\n"); - goto tx_error; + dev_kfree_skb(skb); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; } } else { info = &geneve->info; @@ -1006,7 +1007,7 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev)
if (likely(!err)) return NETDEV_TX_OK; -tx_error: + dev_kfree_skb(skb);
if (err == -ELOOP)
From: Jann Horn jannh@google.com
[ Upstream commit acaab7335bd6f0c0b54ce3a00bd7f18222ce0f5f ]
The zlib inflate code has an old micro-optimization based on the assumption that for pre-increment memory accesses, the compiler will generate code that fits better into the processor's pipeline than what would be generated for post-increment memory accesses.
This optimization was already removed in upstream zlib in 2016: https://github.com/madler/zlib/commit/9aaec95e8211
This optimization causes UB according to C99, which says in section 6.5.6 "Additive operators": "If both the pointer operand and the result point to elements of the same array object, or one past the last element of the array object, the evaluation shall not produce an overflow; otherwise, the behavior is undefined".
This UB is not only a theoretical concern, but can also cause trouble for future work on compiler-based sanitizers.
According to the zlib commit, this optimization also is not optimal anymore with modern compilers.
Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the POSTINC case, and remove the macro definitions, just like in the upstream patch.
Signed-off-by: Jann Horn jannh@google.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Cc: Mikhail Zaslonko zaslonko@linux.ibm.com Link: http://lkml.kernel.org/r/20200507123112.252723-1-jannh@google.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/zlib_inflate/inffast.c | 91 +++++++++++++++----------------------- 1 file changed, 35 insertions(+), 56 deletions(-)
diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c index 2c13ecc5bb2c..ed1f3df27260 100644 --- a/lib/zlib_inflate/inffast.c +++ b/lib/zlib_inflate/inffast.c @@ -10,17 +10,6 @@
#ifndef ASMINF
-/* Allow machine dependent optimization for post-increment or pre-increment. - Based on testing to date, - Pre-increment preferred for: - - PowerPC G3 (Adler) - - MIPS R5000 (Randers-Pehrson) - Post-increment preferred for: - - none - No measurable difference: - - Pentium III (Anderson) - - M68060 (Nikl) - */ union uu { unsigned short us; unsigned char b[2]; @@ -38,16 +27,6 @@ get_unaligned16(const unsigned short *p) return mm.us; }
-#ifdef POSTINC -# define OFF 0 -# define PUP(a) *(a)++ -# define UP_UNALIGNED(a) get_unaligned16((a)++) -#else -# define OFF 1 -# define PUP(a) *++(a) -# define UP_UNALIGNED(a) get_unaligned16(++(a)) -#endif - /* Decode literal, length, and distance codes and write out the resulting literal and match bytes until either not enough input or output is @@ -115,9 +94,9 @@ void inflate_fast(z_streamp strm, unsigned start)
/* copy state to local variables */ state = (struct inflate_state *)strm->state; - in = strm->next_in - OFF; + in = strm->next_in; last = in + (strm->avail_in - 5); - out = strm->next_out - OFF; + out = strm->next_out; beg = out - (start - strm->avail_out); end = out + (strm->avail_out - 257); #ifdef INFLATE_STRICT @@ -138,9 +117,9 @@ void inflate_fast(z_streamp strm, unsigned start) input data or output space */ do { if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; + hold += (unsigned long)(*in++) << bits; bits += 8; - hold += (unsigned long)(PUP(in)) << bits; + hold += (unsigned long)(*in++) << bits; bits += 8; } this = lcode[hold & lmask]; @@ -150,14 +129,14 @@ void inflate_fast(z_streamp strm, unsigned start) bits -= op; op = (unsigned)(this.op); if (op == 0) { /* literal */ - PUP(out) = (unsigned char)(this.val); + *out++ = (unsigned char)(this.val); } else if (op & 16) { /* length base */ len = (unsigned)(this.val); op &= 15; /* number of extra bits */ if (op) { if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; + hold += (unsigned long)(*in++) << bits; bits += 8; } len += (unsigned)hold & ((1U << op) - 1); @@ -165,9 +144,9 @@ void inflate_fast(z_streamp strm, unsigned start) bits -= op; } if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; + hold += (unsigned long)(*in++) << bits; bits += 8; - hold += (unsigned long)(PUP(in)) << bits; + hold += (unsigned long)(*in++) << bits; bits += 8; } this = dcode[hold & dmask]; @@ -180,10 +159,10 @@ void inflate_fast(z_streamp strm, unsigned start) dist = (unsigned)(this.val); op &= 15; /* number of extra bits */ if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; + hold += (unsigned long)(*in++) << bits; bits += 8; if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; + hold += (unsigned long)(*in++) << bits; bits += 8; } } @@ -205,13 +184,13 @@ void inflate_fast(z_streamp strm, unsigned start) state->mode = BAD; break; } - from = window - OFF; + from = window; if (write == 0) { /* very common case */ from += wsize - op; if (op < len) { /* some from window */ len -= op; do { - PUP(out) = PUP(from); + *out++ = *from++; } while (--op); from = out - dist; /* rest from output */ } @@ -222,14 +201,14 @@ void inflate_fast(z_streamp strm, unsigned start) if (op < len) { /* some from end of window */ len -= op; do { - PUP(out) = PUP(from); + *out++ = *from++; } while (--op); - from = window - OFF; + from = window; if (write < len) { /* some from start of window */ op = write; len -= op; do { - PUP(out) = PUP(from); + *out++ = *from++; } while (--op); from = out - dist; /* rest from output */ } @@ -240,21 +219,21 @@ void inflate_fast(z_streamp strm, unsigned start) if (op < len) { /* some from window */ len -= op; do { - PUP(out) = PUP(from); + *out++ = *from++; } while (--op); from = out - dist; /* rest from output */ } } while (len > 2) { - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); + *out++ = *from++; + *out++ = *from++; + *out++ = *from++; len -= 3; } if (len) { - PUP(out) = PUP(from); + *out++ = *from++; if (len > 1) - PUP(out) = PUP(from); + *out++ = *from++; } } else { @@ -264,29 +243,29 @@ void inflate_fast(z_streamp strm, unsigned start) from = out - dist; /* copy direct from output */ /* minimum length is three */ /* Align out addr */ - if (!((long)(out - 1 + OFF) & 1)) { - PUP(out) = PUP(from); + if (!((long)(out - 1) & 1)) { + *out++ = *from++; len--; } - sout = (unsigned short *)(out - OFF); + sout = (unsigned short *)(out); if (dist > 2) { unsigned short *sfrom;
- sfrom = (unsigned short *)(from - OFF); + sfrom = (unsigned short *)(from); loops = len >> 1; do #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS - PUP(sout) = PUP(sfrom); + *sout++ = *sfrom++; #else - PUP(sout) = UP_UNALIGNED(sfrom); + *sout++ = get_unaligned16(sfrom++); #endif while (--loops); - out = (unsigned char *)sout + OFF; - from = (unsigned char *)sfrom + OFF; + out = (unsigned char *)sout; + from = (unsigned char *)sfrom; } else { /* dist == 1 or dist == 2 */ unsigned short pat16;
- pat16 = *(sout-1+OFF); + pat16 = *(sout-1); if (dist == 1) { union uu mm; /* copy one char pattern to both bytes */ @@ -296,12 +275,12 @@ void inflate_fast(z_streamp strm, unsigned start) } loops = len >> 1; do - PUP(sout) = pat16; + *sout++ = pat16; while (--loops); - out = (unsigned char *)sout + OFF; + out = (unsigned char *)sout; } if (len & 1) - PUP(out) = PUP(from); + *out++ = *from++; } } else if ((op & 64) == 0) { /* 2nd level distance code */ @@ -336,8 +315,8 @@ void inflate_fast(z_streamp strm, unsigned start) hold &= (1U << bits) - 1;
/* update state and return */ - strm->next_in = in + OFF; - strm->next_out = out + OFF; + strm->next_in = in; + strm->next_out = out; strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); strm->avail_out = (unsigned)(out < end ? 257 + (end - out) : 257 - (out - end));
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit bd93f003b7462ae39a43c531abca37fe7073b866 ]
Clang normally does not warn about certain issues in inline functions when it only happens in an eliminated code path. However if something else goes wrong, it does tend to complain about the definition of hweight_long() on 32-bit targets:
include/linux/bitops.h:75:41: error: shift count >= width of type [-Werror,-Wshift-count-overflow] return sizeof(w) == 4 ? hweight32(w) : hweight64(w); ^~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:29:49: note: expanded from macro 'hweight64' define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w)) ^~~~~~~~~~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:21:76: note: expanded from macro '__const_hweight64' define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32)) ^ ~~ include/asm-generic/bitops/const_hweight.h:20:49: note: expanded from macro '__const_hweight32' define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16)) ^ include/asm-generic/bitops/const_hweight.h:19:72: note: expanded from macro '__const_hweight16' define __const_hweight16(w) (__const_hweight8(w) + __const_hweight8((w) >> 8 )) ^ include/asm-generic/bitops/const_hweight.h:12:9: note: expanded from macro '__const_hweight8' (!!((w) & (1ULL << 2))) + \
Adding an explicit cast to __u64 avoids that warning and makes it easier to read other output.
Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Andrew Morton akpm@linux-foundation.org Acked-by: Christian Brauner christian.brauner@ubuntu.com Cc: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: Rasmus Villemoes linux@rasmusvillemoes.dk Cc: Josh Poimboeuf jpoimboe@redhat.com Cc: Nick Desaulniers ndesaulniers@google.com Link: http://lkml.kernel.org/r/20200505135513.65265-1-arnd@arndb.de Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/bitops.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/bitops.h b/include/linux/bitops.h index c94a9ff9f082..4f0e62cbf2ff 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -57,7 +57,7 @@ static inline int get_bitmask_order(unsigned int count)
static __always_inline unsigned long hweight_long(unsigned long w) { - return sizeof(w) == 4 ? hweight32(w) : hweight64(w); + return sizeof(w) == 4 ? hweight32(w) : hweight64((__u64)w); }
/**
From: Ram Pai linuxram@us.ibm.com
[ Upstream commit 6e373263ce07eeaa6410843179535fbdf561fc31 ]
alloc_random_pkey() was allocating the same pkey every time. Not all pkeys were geting tested. This fixes it.
Signed-off-by: Ram Pai linuxram@us.ibm.com Signed-off-by: Sandipan Das sandipan@linux.ibm.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Acked-by: Dave Hansen dave.hansen@intel.com Cc: Dave Hansen dave.hansen@intel.com Cc: Florian Weimer fweimer@redhat.com Cc: "Desnes A. Nunes do Rosario" desnesn@linux.vnet.ibm.com Cc: Ingo Molnar mingo@kernel.org Cc: Thiago Jung Bauermann bauerman@linux.ibm.com Cc: "Aneesh Kumar K.V" aneesh.kumar@linux.ibm.com Cc: Michael Ellerman mpe@ellerman.id.au Cc: Michal Hocko mhocko@kernel.org Cc: Michal Suchanek msuchanek@suse.de Cc: Shuah Khan shuah@kernel.org Link: http://lkml.kernel.org/r/0162f55816d4e783a0d6e49e554d0ab9a3c9a23b.1585646528... Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/x86/protection_keys.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/x86/protection_keys.c b/tools/testing/selftests/x86/protection_keys.c index 480995bceefa..47191af46617 100644 --- a/tools/testing/selftests/x86/protection_keys.c +++ b/tools/testing/selftests/x86/protection_keys.c @@ -24,6 +24,7 @@ #define _GNU_SOURCE #include <errno.h> #include <linux/futex.h> +#include <time.h> #include <sys/time.h> #include <sys/syscall.h> #include <string.h> @@ -612,10 +613,10 @@ int alloc_random_pkey(void) int nr_alloced = 0; int random_index; memset(alloced_pkeys, 0, sizeof(alloced_pkeys)); + srand((unsigned int)time(NULL));
/* allocate every possible key and make a note of which ones we got */ max_nr_pkey_allocs = NR_PKEYS; - max_nr_pkey_allocs = 1; for (i = 0; i < max_nr_pkey_allocs; i++) { int new_pkey = alloc_pkey(); if (new_pkey < 0)
From: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com
[ Upstream commit 48bc3cd3e07a1486f45d9971c75d6090976c3b1b ]
In blk_add_trace_spliti() blk_add_trace_bio_remap() use blk_status_to_errno() to pass the error instead of pasing the bi_status. This fixes the sparse warning.
Signed-off-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/blktrace.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index e7e483cdbea6..9e02e1ce0ac0 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -999,8 +999,10 @@ static void blk_add_trace_split(void *ignore,
__blk_add_trace(bt, bio->bi_iter.bi_sector, bio->bi_iter.bi_size, bio_op(bio), bio->bi_opf, - BLK_TA_SPLIT, bio->bi_status, sizeof(rpdu), - &rpdu, blk_trace_bio_get_cgid(q, bio)); + BLK_TA_SPLIT, + blk_status_to_errno(bio->bi_status), + sizeof(rpdu), &rpdu, + blk_trace_bio_get_cgid(q, bio)); } rcu_read_unlock(); } @@ -1037,7 +1039,8 @@ static void blk_add_trace_bio_remap(void *ignore, r.sector_from = cpu_to_be64(from);
__blk_add_trace(bt, bio->bi_iter.bi_sector, bio->bi_iter.bi_size, - bio_op(bio), bio->bi_opf, BLK_TA_REMAP, bio->bi_status, + bio_op(bio), bio->bi_opf, BLK_TA_REMAP, + blk_status_to_errno(bio->bi_status), sizeof(r), &r, blk_trace_bio_get_cgid(q, bio)); rcu_read_unlock(); }
From: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com
[ Upstream commit 71df3fd82e7cccec7b749a8607a4662d9f7febdd ]
In function get_pdu_len() replace variable type from __u64 to __be64. This fixes sparse warning.
Signed-off-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/blktrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 9e02e1ce0ac0..23e5f86c9921 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1262,7 +1262,7 @@ static inline __u16 t_error(const struct trace_entry *ent)
static __u64 get_pdu_int(const struct trace_entry *ent, bool has_cg) { - const __u64 *val = pdu_start(ent, has_cg); + const __be64 *val = pdu_start(ent, has_cg); return be64_to_cpu(*val); }
From: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com
[ Upstream commit 5aec598c456fe3c1b71a1202cbb42bdc2a643277 ]
The function blk_log_remap() can be simplified by removing the call to get_pdu_remap() that copies the values into extra variable to print the data, which also fixes the endiannness warning reported by sparse.
Signed-off-by: Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/blktrace.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 23e5f86c9921..a677aa84ccb6 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1266,17 +1266,6 @@ static __u64 get_pdu_int(const struct trace_entry *ent, bool has_cg) return be64_to_cpu(*val); }
-static void get_pdu_remap(const struct trace_entry *ent, - struct blk_io_trace_remap *r, bool has_cg) -{ - const struct blk_io_trace_remap *__r = pdu_start(ent, has_cg); - __u64 sector_from = __r->sector_from; - - r->device_from = be32_to_cpu(__r->device_from); - r->device_to = be32_to_cpu(__r->device_to); - r->sector_from = be64_to_cpu(sector_from); -} - typedef void (blk_log_action_t) (struct trace_iterator *iter, const char *act, bool has_cg);
@@ -1402,13 +1391,13 @@ static void blk_log_with_error(struct trace_seq *s,
static void blk_log_remap(struct trace_seq *s, const struct trace_entry *ent, bool has_cg) { - struct blk_io_trace_remap r = { .device_from = 0, }; + const struct blk_io_trace_remap *__r = pdu_start(ent, has_cg);
- get_pdu_remap(ent, &r, has_cg); trace_seq_printf(s, "%llu + %u <- (%d,%d) %llu\n", t_sector(ent), t_sec(ent), - MAJOR(r.device_from), MINOR(r.device_from), - (unsigned long long)r.sector_from); + MAJOR(be32_to_cpu(__r->device_from)), + MINOR(be32_to_cpu(__r->device_from)), + be64_to_cpu(__r->sector_from)); }
static void blk_log_plug(struct trace_seq *s, const struct trace_entry *ent, bool has_cg)
From: Bob Peterson rpeterso@redhat.com
[ Upstream commit 83d060ca8d90fa1e3feac227f995c013100862d3 ]
Before this patch, transactions could be merged into the system transaction by function gfs2_merge_trans(), but the transaction ail lists were never merged. Because the ail flushing mechanism can run separately, bd elements can be attached to the transaction's buffer list during the transaction (trans_add_meta, etc) but quickly moved to its ail lists. Later, in function gfs2_trans_end, the transaction can be freed (by gfs2_trans_end) while it still has bd elements queued to its ail lists, which can cause it to either lose track of the bd elements altogether (memory leak) or worse, reference the bd elements after the parent transaction has been freed.
Although I've not seen any serious consequences, the problem becomes apparent with the previous patch's addition of:
gfs2_assert_warn(sdp, list_empty(&tr->tr_ail1_list));
to function gfs2_trans_free().
This patch adds logic into gfs2_merge_trans() to move the merged transaction's ail lists to the sdp transaction. This prevents the use-after-free. To do this properly, we need to hold the ail lock, so we pass sdp into the function instead of the transaction itself.
Signed-off-by: Bob Peterson rpeterso@redhat.com Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/log.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 110e5c4db819..a4b6a49462a4 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -881,8 +881,10 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags) * @new: New transaction to be merged */
-static void gfs2_merge_trans(struct gfs2_trans *old, struct gfs2_trans *new) +static void gfs2_merge_trans(struct gfs2_sbd *sdp, struct gfs2_trans *new) { + struct gfs2_trans *old = sdp->sd_log_tr; + WARN_ON_ONCE(!test_bit(TR_ATTACHED, &old->tr_flags));
old->tr_num_buf_new += new->tr_num_buf_new; @@ -893,6 +895,11 @@ static void gfs2_merge_trans(struct gfs2_trans *old, struct gfs2_trans *new)
list_splice_tail_init(&new->tr_databuf, &old->tr_databuf); list_splice_tail_init(&new->tr_buf, &old->tr_buf); + + spin_lock(&sdp->sd_ail_lock); + list_splice_tail_init(&new->tr_ail1_list, &old->tr_ail1_list); + list_splice_tail_init(&new->tr_ail2_list, &old->tr_ail2_list); + spin_unlock(&sdp->sd_ail_lock); }
static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr) @@ -904,7 +911,7 @@ static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr) gfs2_log_lock(sdp);
if (sdp->sd_log_tr) { - gfs2_merge_trans(sdp->sd_log_tr, tr); + gfs2_merge_trans(sdp, tr); } else if (tr->tr_num_buf_new || tr->tr_num_databuf_new) { gfs2_assert_withdraw(sdp, test_bit(TR_ALLOCED, &tr->tr_flags)); sdp->sd_log_tr = tr;
From: Dan Murphy dmurphy@ti.com
[ Upstream commit 5cd119d9a05f1c1a08778a7305b4ca0f16bc1e20 ]
When CONFIG_OF_MDIO is set to be a module the code block is not compiled. Use the IS_ENABLED macro that checks for both built in as well as module.
Fixes: cf41a51db8985 ("of/phylib: Use device tree properties to initialize Marvell PHYs.") Signed-off-by: Dan Murphy dmurphy@ti.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/marvell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index a7796134e3be..91cf1d167263 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -358,7 +358,7 @@ static int m88e1101_config_aneg(struct phy_device *phydev) return marvell_config_aneg(phydev); }
-#ifdef CONFIG_OF_MDIO +#if IS_ENABLED(CONFIG_OF_MDIO) /* Set and/or override some configuration registers based on the * marvell,reg-init property stored in the of_node for the phydev. *
From: Sanjay R Mehta sanju.mehta@amd.com
[ Upstream commit 98f4e140264eeb52f22ff05be6b6dd48237255ac ]
Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead.
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe logang@deltatee.com Signed-off-by: Sanjay R Mehta sanju.mehta@amd.com Signed-off-by: Arindam Nath arindam.nath@amd.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/test/ntb_perf.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index e9b7c2dfc730..52c29791fc02 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -556,7 +556,7 @@ static void perf_free_inbuf(struct perf_peer *peer) return;
(void)ntb_mw_clear_trans(peer->perf->ntb, peer->pidx, peer->gidx); - dma_free_coherent(&peer->perf->ntb->dev, peer->inbuf_size, + dma_free_coherent(&peer->perf->ntb->pdev->dev, peer->inbuf_size, peer->inbuf, peer->inbuf_xlat); peer->inbuf = NULL; } @@ -585,8 +585,9 @@ static int perf_setup_inbuf(struct perf_peer *peer)
perf_free_inbuf(peer);
- peer->inbuf = dma_alloc_coherent(&perf->ntb->dev, peer->inbuf_size, - &peer->inbuf_xlat, GFP_KERNEL); + peer->inbuf = dma_alloc_coherent(&perf->ntb->pdev->dev, + peer->inbuf_size, &peer->inbuf_xlat, + GFP_KERNEL); if (!peer->inbuf) { dev_err(&perf->ntb->dev, "Failed to alloc inbuf of %pa\n", &peer->inbuf_size); @@ -1517,4 +1518,3 @@ static void __exit perf_exit(void) destroy_workqueue(perf_wq); } module_exit(perf_exit); -
From: Sanjay R Mehta sanju.mehta@amd.com
[ Upstream commit 433efe720674efd9fdbcef78be75793393cf05db ]
Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead.
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Sanjay R Mehta sanju.mehta@amd.com Signed-off-by: Arindam Nath arindam.nath@amd.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/test/ntb_tool.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c index d592c0ffbd19..025747c1568e 100644 --- a/drivers/ntb/test/ntb_tool.c +++ b/drivers/ntb/test/ntb_tool.c @@ -590,7 +590,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx, inmw->size = min_t(resource_size_t, req_size, size); inmw->size = round_up(inmw->size, addr_align); inmw->size = round_up(inmw->size, size_align); - inmw->mm_base = dma_alloc_coherent(&tc->ntb->dev, inmw->size, + inmw->mm_base = dma_alloc_coherent(&tc->ntb->pdev->dev, inmw->size, &inmw->dma_base, GFP_KERNEL); if (!inmw->mm_base) return -ENOMEM; @@ -612,7 +612,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx, return 0;
err_free_dma: - dma_free_coherent(&tc->ntb->dev, inmw->size, inmw->mm_base, + dma_free_coherent(&tc->ntb->pdev->dev, inmw->size, inmw->mm_base, inmw->dma_base); inmw->mm_base = NULL; inmw->dma_base = 0; @@ -629,7 +629,7 @@ static void tool_free_mw(struct tool_ctx *tc, int pidx, int widx)
if (inmw->mm_base != NULL) { ntb_mw_clear_trans(tc->ntb, pidx, widx); - dma_free_coherent(&tc->ntb->dev, inmw->size, + dma_free_coherent(&tc->ntb->pdev->dev, inmw->size, inmw->mm_base, inmw->dma_base); }
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit 912e12813dd03c602e4922fc34709ec4d4380cf0 ]
When running ntb_test this warning is issued:
./ntb_test.sh: line 200: warning: command substitution: ignored null byte in input
This is caused by the kernel returning one more byte than is necessary when reading the link file.
Reduce the number of bytes read back to 2 as it was before the commit that regressed this.
Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe logang@deltatee.com Acked-by: Allen Hubbe allenbh@gmail.com Tested-by: Alexander Fomichev fomichev.ru@gmail.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/test/ntb_tool.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c index 025747c1568e..311d6ab8d016 100644 --- a/drivers/ntb/test/ntb_tool.c +++ b/drivers/ntb/test/ntb_tool.c @@ -504,7 +504,7 @@ static ssize_t tool_peer_link_read(struct file *filep, char __user *ubuf, buf[1] = '\n'; buf[2] = '\0';
- return simple_read_from_buffer(ubuf, size, offp, buf, 3); + return simple_read_from_buffer(ubuf, size, offp, buf, 2); }
static TOOL_FOPS_RDWR(tool_peer_link_fops, @@ -1690,4 +1690,3 @@ static void __exit tool_exit(void) debugfs_remove_recursive(tool_dbgfs_topdir); } module_exit(tool_exit); -
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit 40da7d9a93c8941737ef4a1208d32c13ce017fe1 ]
Commit 417cf39cfea9 ("NTB: Set dma mask and dma coherent mask to NTB devices") started using the NTB device for DMA allocations which was turns out was wrong. If the IOMMU is enabled, such alloctanions will always fail with messages such as:
DMAR: Allocating domain for 0000:02:00.1 failed
This is because the IOMMU has not setup the device for such use.
Change the tools back to using the PCI device for allocations seeing it doesn't make sense to add an IOMMU group for the non-physical NTB device. Also remove the code that sets the DMA mask as it no longer makes sense to do this.
Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe logang@deltatee.com Tested-by: Alexander Fomichev fomichev.ru@gmail.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/core.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/ntb/core.c b/drivers/ntb/core.c index c9a0912b175f..f8f75a504a58 100644 --- a/drivers/ntb/core.c +++ b/drivers/ntb/core.c @@ -311,4 +311,3 @@ static void __exit ntb_driver_exit(void) bus_unregister(&ntb_bus); } module_exit(ntb_driver_exit); -
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit a9c4211ac918ade1522aced6b5acfbe824722f7d ]
ntb_perf should not require more than one memory window per peer. This was probably an off-by-one error.
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe logang@deltatee.com Acked-by: Allen Hubbe allenbh@gmail.com Tested-by: Alexander Fomichev fomichev.ru@gmail.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/test/ntb_perf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index 52c29791fc02..3817eadab2cf 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -653,7 +653,7 @@ static int perf_init_service(struct perf_ctx *perf) { u64 mask;
- if (ntb_peer_mw_count(perf->ntb) < perf->pcnt + 1) { + if (ntb_peer_mw_count(perf->ntb) < perf->pcnt) { dev_err(&perf->ntb->dev, "Not enough memory windows\n"); return -EINVAL; }
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit b54369a248c2e033bfcf5d6917e08cf9d73d54a6 ]
Legacy drivers do not have port numbers (but is reliably only two ports) and was broken by the recent commit that added mult-port support to ntb_perf. This is especially important to support the cross link topology which is perfectly symmetric and cannot assign unique port numbers easily.
Hardware that returns zero for both the local port and the peer should just always use gidx=0 for the only peer.
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe logang@deltatee.com Acked-by: Allen Hubbe allenbh@gmail.com Tested-by: Alexander Fomichev fomichev.ru@gmail.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/test/ntb_perf.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index 3817eadab2cf..281170887ad0 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -1423,6 +1423,16 @@ static int perf_init_peers(struct perf_ctx *perf) if (perf->gidx == -1) perf->gidx = pidx;
+ /* + * Hardware with only two ports may not have unique port + * numbers. In this case, the gidxs should all be zero. + */ + if (perf->pcnt == 1 && ntb_port_number(perf->ntb) == 0 && + ntb_peer_port_number(perf->ntb, 0) == 0) { + perf->gidx = 0; + perf->peers[0].gidx = 0; + } + for (pidx = 0; pidx < perf->pcnt; pidx++) { ret = perf_setup_peer_mw(&perf->peers[pidx]); if (ret)
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit 34d8673a01b053b6231a995a4eec9341163d63be ]
When running ntb_test, the script tries to run the ntb_perf test immediately after probing the modules. Since adding multi-port support, this fails seeing the new initialization procedure in ntb_perf can not complete instantly.
To fix this we add a completion which is waited on when a test is started. In this way, run can be written any time after the module is loaded and it will wait for the initialization to complete instead of sending an error.
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe logang@deltatee.com Acked-by: Allen Hubbe allenbh@gmail.com Tested-by: Alexander Fomichev fomichev.ru@gmail.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ntb/test/ntb_perf.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index 281170887ad0..5ce4766a6c9e 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -158,6 +158,8 @@ struct perf_peer { /* NTB connection setup service */ struct work_struct service; unsigned long sts; + + struct completion init_comp; }; #define to_peer_service(__work) \ container_of(__work, struct perf_peer, service) @@ -546,6 +548,7 @@ static int perf_setup_outbuf(struct perf_peer *peer)
/* Initialization is finally done */ set_bit(PERF_STS_DONE, &peer->sts); + complete_all(&peer->init_comp);
return 0; } @@ -637,6 +640,7 @@ static void perf_service_work(struct work_struct *work) perf_setup_outbuf(peer);
if (test_and_clear_bit(PERF_CMD_CLEAR, &peer->sts)) { + init_completion(&peer->init_comp); clear_bit(PERF_STS_DONE, &peer->sts); if (test_bit(0, &peer->perf->busy_flag) && peer == peer->perf->test_peer) { @@ -1052,8 +1056,9 @@ static int perf_submit_test(struct perf_peer *peer) struct perf_thread *pthr; int tidx, ret;
- if (!test_bit(PERF_STS_DONE, &peer->sts)) - return -ENOLINK; + ret = wait_for_completion_interruptible(&peer->init_comp); + if (ret < 0) + return ret;
if (test_and_set_bit_lock(0, &perf->busy_flag)) return -EBUSY; @@ -1419,6 +1424,7 @@ static int perf_init_peers(struct perf_ctx *perf) peer->gidx = pidx; } INIT_WORK(&peer->service, perf_service_work); + init_completion(&peer->init_comp); } if (perf->gidx == -1) perf->gidx = pidx;
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit 2130c0ba69d69bb21f5c52787f2587db00d13d8a ]
When remote files are counted in get_files_count, without using SSH, the code returns 0 because there is a colon prepended to $LOC. $VPATH should have been used instead of $LOC.
Fixes: 06bd0407d06c ("NTB: ntb_test: Update ntb_tool Scratchpad tests") Signed-off-by: Logan Gunthorpe logang@deltatee.com Acked-by: Allen Hubbe allenbh@gmail.com Tested-by: Alexander Fomichev fomichev.ru@gmail.com Signed-off-by: Jon Mason jdmason@kudzu.us Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/ntb/ntb_test.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh index 9c60337317c6..020137b61407 100755 --- a/tools/testing/selftests/ntb/ntb_test.sh +++ b/tools/testing/selftests/ntb/ntb_test.sh @@ -241,7 +241,7 @@ function get_files_count() split_remote $LOC
if [[ "$REMOTE" == "" ]]; then - echo $(ls -1 "$LOC"/${NAME}* 2>/dev/null | wc -l) + echo $(ls -1 "$VPATH"/${NAME}* 2>/dev/null | wc -l) else echo $(ssh "$REMOTE" "ls -1 "$VPATH"/${NAME}* | \ wc -l" 2> /dev/null)
From: Max Staudt max@enpas.org
[ Upstream commit cdb555397f438592bab00599037c347b700cf397 ]
This has been found by the Kernel Test Robot: http://lkml.iu.edu/hypermail/linux/kernel/2006.0/06862.html
With CONFIG_AMIGA_PCMCIA=n, io_mm.h does not pull in amigahw.h and ZTWO_VADDR is undefined. Add forgotten include to i2c-icy.c
Fixes: 4768e90ecaec ("i2c: Add i2c-icy for I2C on m68k/Amiga") Reported-by: kernel test robot lkp@intel.com Signed-off-by: Max Staudt max@enpas.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-icy.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/i2c/busses/i2c-icy.c b/drivers/i2c/busses/i2c-icy.c index 8382eb64b424..d6c17506dba4 100644 --- a/drivers/i2c/busses/i2c-icy.c +++ b/drivers/i2c/busses/i2c-icy.c @@ -43,6 +43,7 @@ #include <linux/i2c.h> #include <linux/i2c-algo-pcf.h>
+#include <asm/amigahw.h> #include <asm/amigaints.h> #include <linux/zorro.h>
From: Shaokun Zhang zhangshaokun@hisilicon.com
[ Upstream commit 961abd78adcb4c72c343fcd9f9dc5e2ebbe9b448 ]
In L3C uncore PMU drivers, bit16 is used to control all counters enable & disable. Wrong value is given in the driver and its default value is 1'b1, it can work because each PMU counter has its own control bits too. Let's fix the wrong value.
Fixes: 2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver") Signed-off-by: Shaokun Zhang zhangshaokun@hisilicon.com Cc: Will Deacon will@kernel.org Cc: Mark Rutland mark.rutland@arm.com Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@his... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index 078b8dc57250..c5b0950c2a7a 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -35,7 +35,7 @@ /* L3C has 8-counters */ #define L3C_NR_COUNTERS 0x8
-#define L3C_PERF_CTRL_EN 0x20000 +#define L3C_PERF_CTRL_EN 0x10000 #define L3C_EVTYPE_NONE 0xff
/*
From: tannerlove tannerlove@google.com
[ Upstream commit 8027bc0307ce59759b90679fa5d8b22949586d20 ]
If user passed an interface option longer than 15 characters, then device.ifr_name and hwtstamp.ifr_name became non-null-terminated strings. The compiler warned about this:
timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \ destination size [-Wstringop-truncation] 353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name));
Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by: Tanner Love tannerlove@google.com Acked-by: Willem de Bruijn willemb@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/networking/timestamping/timestamping.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/networking/timestamping/timestamping.c b/tools/testing/selftests/networking/timestamping/timestamping.c index aca3491174a1..f4bb4fef0f39 100644 --- a/tools/testing/selftests/networking/timestamping/timestamping.c +++ b/tools/testing/selftests/networking/timestamping/timestamping.c @@ -313,10 +313,16 @@ int main(int argc, char **argv) int val; socklen_t len; struct timeval next; + size_t if_len;
if (argc < 2) usage(0); interface = argv[1]; + if_len = strlen(interface); + if (if_len >= IFNAMSIZ) { + printf("interface name exceeds IFNAMSIZ\n"); + exit(1); + }
for (i = 2; i < argc; i++) { if (!strcasecmp(argv[i], "SO_TIMESTAMP")) @@ -350,12 +356,12 @@ int main(int argc, char **argv) bail("socket");
memset(&device, 0, sizeof(device)); - strncpy(device.ifr_name, interface, sizeof(device.ifr_name)); + memcpy(device.ifr_name, interface, if_len + 1); if (ioctl(sock, SIOCGIFADDR, &device) < 0) bail("getting interface IP address");
memset(&hwtstamp, 0, sizeof(hwtstamp)); - strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name)); + memcpy(hwtstamp.ifr_name, interface, if_len + 1); hwtstamp.ifr_data = (void *)&hwconfig; memset(&hwconfig, 0, sizeof(hwconfig)); hwconfig.tx_type =
From: Eric Biggers ebiggers@google.com
[ Upstream commit 0b6d4ca04a86b9dababbb76e58d33c437e127b77 ]
kmalloc() returns kmalloc'ed memory, and kvmalloc() returns either kmalloc'ed or vmalloc'ed memory. But the f2fs wrappers, f2fs_kmalloc() and f2fs_kvmalloc(), both return both kinds of memory.
It's redundant to have two functions that do the same thing, and also breaking the standard naming convention is causing bugs since people assume it's safe to kfree() memory allocated by f2fs_kmalloc(). See e.g. the various allocations in fs/f2fs/compress.c.
Fix this by making f2fs_kmalloc() just use kmalloc(). And to avoid re-introducing the allocation failures that the vmalloc fallback was intended to fix, convert the largest allocations to use f2fs_kvmalloc().
Signed-off-by: Eric Biggers ebiggers@google.com Reviewed-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/checkpoint.c | 4 ++-- fs/f2fs/f2fs.h | 8 +------- fs/f2fs/node.c | 8 ++++---- fs/f2fs/super.c | 2 +- 4 files changed, 8 insertions(+), 14 deletions(-)
diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c index a28ffecc0f95..bbd07fe8a492 100644 --- a/fs/f2fs/checkpoint.c +++ b/fs/f2fs/checkpoint.c @@ -892,8 +892,8 @@ int f2fs_get_valid_checkpoint(struct f2fs_sb_info *sbi) int i; int err;
- sbi->ckpt = f2fs_kzalloc(sbi, array_size(blk_size, cp_blks), - GFP_KERNEL); + sbi->ckpt = f2fs_kvzalloc(sbi, array_size(blk_size, cp_blks), + GFP_KERNEL); if (!sbi->ckpt) return -ENOMEM; /* diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 3edde3d6d089..3c7a4df5cdf0 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -2789,18 +2789,12 @@ static inline bool f2fs_may_extent_tree(struct inode *inode) static inline void *f2fs_kmalloc(struct f2fs_sb_info *sbi, size_t size, gfp_t flags) { - void *ret; - if (time_to_inject(sbi, FAULT_KMALLOC)) { f2fs_show_injection_info(FAULT_KMALLOC); return NULL; }
- ret = kmalloc(size, flags); - if (ret) - return ret; - - return kvmalloc(size, flags); + return kmalloc(size, flags); }
static inline void *f2fs_kzalloc(struct f2fs_sb_info *sbi, diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index f14401a77d60..90a20bd12961 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -2933,7 +2933,7 @@ static int __get_nat_bitmaps(struct f2fs_sb_info *sbi) return 0;
nm_i->nat_bits_blocks = F2FS_BLK_ALIGN((nat_bits_bytes << 1) + 8); - nm_i->nat_bits = f2fs_kzalloc(sbi, + nm_i->nat_bits = f2fs_kvzalloc(sbi, nm_i->nat_bits_blocks << F2FS_BLKSIZE_BITS, GFP_KERNEL); if (!nm_i->nat_bits) return -ENOMEM; @@ -3066,9 +3066,9 @@ static int init_free_nid_cache(struct f2fs_sb_info *sbi) int i;
nm_i->free_nid_bitmap = - f2fs_kzalloc(sbi, array_size(sizeof(unsigned char *), - nm_i->nat_blocks), - GFP_KERNEL); + f2fs_kvzalloc(sbi, array_size(sizeof(unsigned char *), + nm_i->nat_blocks), + GFP_KERNEL); if (!nm_i->free_nid_bitmap) return -ENOMEM;
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 47bfa5f2b75d..b530db25f2f2 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -2889,7 +2889,7 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int devi) if (nr_sectors & (bdev_zone_sectors(bdev) - 1)) FDEV(devi).nr_blkz++;
- FDEV(devi).blkz_seq = f2fs_kzalloc(sbi, + FDEV(devi).blkz_seq = f2fs_kvzalloc(sbi, BITS_TO_LONGS(FDEV(devi).nr_blkz) * sizeof(unsigned long), GFP_KERNEL);
From: Zhihao Cheng chengzhihao1@huawei.com
[ Upstream commit 2ca068be09bf8e285036603823696140026dcbe7 ]
Fix afs_put_sysnames() to actually free the specified afs_sysnames object after its reference count has been decreased to zero and its contents have been released.
Fixes: 6f8880d8e681557 ("afs: Implement @sys substitution handling") Signed-off-by: Zhihao Cheng chengzhihao1@huawei.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/proc.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/afs/proc.c b/fs/afs/proc.c index fba2ec3a3a9c..106b27011f6d 100644 --- a/fs/afs/proc.c +++ b/fs/afs/proc.c @@ -562,6 +562,7 @@ void afs_put_sysnames(struct afs_sysnames *sysnames) if (sysnames->subs[i] != afs_init_sysname && sysnames->subs[i] != sysnames->blank) kfree(sysnames->subs[i]); + kfree(sysnames); } }
From: Bard Liao yung-chuan.liao@linux.intel.com
[ Upstream commit 607fa205a7e4dfad28b8a67ab1c985756ddbccb0 ]
Additional checks for valid DAIs expose a corner case, where existing BE dailinks get modified, e.g. HDMI links are tagged with dpcm_capture=1 even if the DAIs are for playback.
This patch makes those changes conditional and flags configuration issues when a BE dailink is has no_pcm=0 but dpcm_playback or dpcm_capture=1 (which makes no sense).
As discussed on the alsa-devel mailing list, there are redundant flags for dpcm_playback, dpcm_capture, playback_only, capture_only. This will have to be cleaned-up in a future update. For now only correct and flag problematic configurations.
Fixes: 218fe9b7ec7f3 ("ASoC: soc-core: Set dpcm_playback / dpcm_capture") Suggested-by: Daniel Baluta daniel.baluta@nxp.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com Reviewed-by: Daniel Baluta daniel.baluta@gmail.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20200608194415.4663-3-pierre-louis.bossart@linux.i... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-core.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 0215e2c94bf0..9df20768a8f2 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1895,9 +1895,25 @@ static void soc_check_tplg_fes(struct snd_soc_card *card) dai_link->platforms->name = component->name;
/* convert non BE into BE */ - dai_link->no_pcm = 1; - dai_link->dpcm_playback = 1; - dai_link->dpcm_capture = 1; + if (!dai_link->no_pcm) { + dai_link->no_pcm = 1; + + if (dai_link->dpcm_playback) + dev_warn(card->dev, + "invalid configuration, dailink %s has flags no_pcm=0 and dpcm_playback=1\n", + dai_link->name); + if (dai_link->dpcm_capture) + dev_warn(card->dev, + "invalid configuration, dailink %s has flags no_pcm=0 and dpcm_capture=1\n", + dai_link->name); + + /* convert normal link into DPCM one */ + if (!(dai_link->dpcm_playback || + dai_link->dpcm_capture)) { + dai_link->dpcm_playback = !dai_link->capture_only; + dai_link->dpcm_capture = !dai_link->playback_only; + } + }
/* override any BE fixups */ dai_link->be_hw_params_fixup =
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit ba4e5abc6c4e173af7c941c03c067263b686665d ]
With additional checks on dailinks, we see errors such as
[ 3.000418] sof-nocodec sof-nocodec: CPU DAI DMIC01 Pin for rtd NoCodec-6 does not support playback
It's not clear why we set the dpcm_playback and dpcm_capture flags unconditionally, add a check on number of channels for each direction to avoid invalid configurations.
Fixes: 8017b8fd37bf5e ('ASoC: SOF: Add Nocodec machine driver support') Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com Reviewed-by: Daniel Baluta daniel.baluta@gmail.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20200608194415.4663-5-pierre-louis.bossart@linux.i... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/nocodec.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sof/nocodec.c b/sound/soc/sof/nocodec.c index 3d128e5a132c..ea0fe9a09f3f 100644 --- a/sound/soc/sof/nocodec.c +++ b/sound/soc/sof/nocodec.c @@ -52,8 +52,10 @@ static int sof_nocodec_bes_setup(struct device *dev, links[i].platforms->name = dev_name(dev); links[i].codecs->dai_name = "snd-soc-dummy-dai"; links[i].codecs->name = "snd-soc-dummy"; - links[i].dpcm_playback = 1; - links[i].dpcm_capture = 1; + if (ops->drv[i].playback.channels_min) + links[i].dpcm_playback = 1; + if (ops->drv[i].capture.channels_min) + links[i].dpcm_capture = 1; }
card->dai_link = links;
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 199a5e8fda54ab3c8c6f6bf980c004e97ebf5ccb ]
The Toshiba Encore WT10-A tablet almost fully works with the default settings for Bay Trail CR devices. The only issue is that it uses a digital mic. connected the the DMIC1 input instead of an analog mic.
Add a quirk for this model using the default settings with the input-map replaced with BYT_RT5640_DMIC1_MAP.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200608204634.93407-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index f222e1091bae..f7964d1ec486 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -754,6 +754,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_JD_NOT_INV | BYT_RT5640_MCLK_EN), }, + { /* Toshiba Encore WT10-A */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TOSHIBA WT10-A-103"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD1_IN4P | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_SSP0_AIF2 | + BYT_RT5640_MCLK_EN), + }, { /* Catch-all for generic Insyde tablets, must be last */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 79d4f823a06796656289f97b922493da5690e46c ]
The Asus T101HA uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like the Asus T100HA. Note unlike the T100HA its jack-detect is not inverted.
Add a DMI quirk with the correct settings for this model.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200608204634.93407-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5645.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 19662ee330d6..c83f7f5da96b 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3625,6 +3625,12 @@ static const struct rt5645_platform_data asus_t100ha_platform_data = { .inv_jd1_1 = true, };
+static const struct rt5645_platform_data asus_t101ha_platform_data = { + .dmic1_data_pin = RT5645_DMIC_DATA_IN2N, + .dmic2_data_pin = RT5645_DMIC2_DISABLE, + .jd_mode = 3, +}; + static const struct rt5645_platform_data lenovo_ideapad_miix_310_pdata = { .jd_mode = 3, .in2_diff = true, @@ -3702,6 +3708,14 @@ static const struct dmi_system_id dmi_platform_data[] = { }, .driver_data = (void *)&asus_t100ha_platform_data, }, + { + .ident = "ASUS T101HA", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T101HA"), + }, + .driver_data = (void *)&asus_t101ha_platform_data, + }, { .ident = "MINIX Z83-4", .matches = {
From: dihu anny.hu@linux.alibaba.com
[ Upstream commit 487082fb7bd2a32b66927d2b22e3a81b072b44f0 ]
When user application calls read() with MSG_PEEK flag to read data of bpf sockmap socket, kernel panic happens at __tcp_bpf_recvmsg+0x12c/0x350. sk_msg is not removed from ingress_msg queue after read out under MSG_PEEK flag is set. Because it's not judged whether sk_msg is the last msg of ingress_msg queue, the next sk_msg may be the head of ingress_msg queue, whose memory address of sg page is invalid. So it's necessary to add check codes to prevent this problem.
[20759.125457] BUG: kernel NULL pointer dereference, address: 0000000000000008 [20759.132118] CPU: 53 PID: 51378 Comm: envoy Tainted: G E 5.4.32 #1 [20759.140890] Hardware name: Inspur SA5212M4/YZMB-00370-109, BIOS 4.1.12 06/18/2017 [20759.149734] RIP: 0010:copy_page_to_iter+0xad/0x300 [20759.270877] __tcp_bpf_recvmsg+0x12c/0x350 [20759.276099] tcp_bpf_recvmsg+0x113/0x370 [20759.281137] inet_recvmsg+0x55/0xc0 [20759.285734] __sys_recvfrom+0xc8/0x130 [20759.290566] ? __audit_syscall_entry+0x103/0x130 [20759.296227] ? syscall_trace_enter+0x1d2/0x2d0 [20759.301700] ? __audit_syscall_exit+0x1e4/0x290 [20759.307235] __x64_sys_recvfrom+0x24/0x30 [20759.312226] do_syscall_64+0x55/0x1b0 [20759.316852] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: dihu anny.hu@linux.alibaba.com Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: John Fastabend john.fastabend@gmail.com Acked-by: Jakub Sitnicki jakub@cloudflare.com Link: https://lore.kernel.org/bpf/20200605084625.9783-1-anny.hu@linux.alibaba.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp_bpf.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c index 69b025408390..ad9f38202731 100644 --- a/net/ipv4/tcp_bpf.c +++ b/net/ipv4/tcp_bpf.c @@ -96,6 +96,9 @@ int __tcp_bpf_recvmsg(struct sock *sk, struct sk_psock *psock, } while (i != msg_rx->sg.end);
if (unlikely(peek)) { + if (msg_rx == list_last_entry(&psock->ingress_msg, + struct sk_msg, list)) + break; msg_rx = list_next_entry(msg_rx, list); continue; }
From: Jakub Sitnicki jakub@cloudflare.com
[ Upstream commit 75e68e5bf2c7fa9d3e874099139df03d5952a3e1 ]
We can end up modifying the sockhash bucket list from two CPUs when a sockhash is being destroyed (sock_hash_free) on one CPU, while a socket that is in the sockhash is unlinking itself from it on another CPU it (sock_hash_delete_from_link).
This results in accessing a list element that is in an undefined state as reported by KASAN:
| ================================================================== | BUG: KASAN: wild-memory-access in sock_hash_free+0x13c/0x280 | Write of size 8 at addr dead000000000122 by task kworker/2:1/95 | | CPU: 2 PID: 95 Comm: kworker/2:1 Not tainted 5.7.0-rc7-02961-ge22c35ab0038-dirty #691 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 | Workqueue: events bpf_map_free_deferred | Call Trace: | dump_stack+0x97/0xe0 | ? sock_hash_free+0x13c/0x280 | __kasan_report.cold+0x5/0x40 | ? mark_lock+0xbc1/0xc00 | ? sock_hash_free+0x13c/0x280 | kasan_report+0x38/0x50 | ? sock_hash_free+0x152/0x280 | sock_hash_free+0x13c/0x280 | bpf_map_free_deferred+0xb2/0xd0 | ? bpf_map_charge_finish+0x50/0x50 | ? rcu_read_lock_sched_held+0x81/0xb0 | ? rcu_read_lock_bh_held+0x90/0x90 | process_one_work+0x59a/0xac0 | ? lock_release+0x3b0/0x3b0 | ? pwq_dec_nr_in_flight+0x110/0x110 | ? rwlock_bug.part.0+0x60/0x60 | worker_thread+0x7a/0x680 | ? _raw_spin_unlock_irqrestore+0x4c/0x60 | kthread+0x1cc/0x220 | ? process_one_work+0xac0/0xac0 | ? kthread_create_on_node+0xa0/0xa0 | ret_from_fork+0x24/0x30 | ==================================================================
Fix it by reintroducing spin-lock protected critical section around the code that removes the elements from the bucket on sockhash free.
To do that we also need to defer processing of removed elements, until out of atomic context so that we can unlink the socket from the map when holding the sock lock.
Fixes: 90db6d772f74 ("bpf, sockmap: Remove bucket->lock from sock_{hash|map}_free") Reported-by: Eric Dumazet eric.dumazet@gmail.com Signed-off-by: Jakub Sitnicki jakub@cloudflare.com Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: John Fastabend john.fastabend@gmail.com Link: https://lore.kernel.org/bpf/20200607205229.2389672-3-jakub@cloudflare.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/sock_map.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/net/core/sock_map.c b/net/core/sock_map.c index ba65c608c228..b22e9f119180 100644 --- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -861,6 +861,7 @@ static void sock_hash_free(struct bpf_map *map) { struct bpf_htab *htab = container_of(map, struct bpf_htab, map); struct bpf_htab_bucket *bucket; + struct hlist_head unlink_list; struct bpf_htab_elem *elem; struct hlist_node *node; int i; @@ -872,13 +873,31 @@ static void sock_hash_free(struct bpf_map *map) synchronize_rcu(); for (i = 0; i < htab->buckets_num; i++) { bucket = sock_hash_select_bucket(htab, i); - hlist_for_each_entry_safe(elem, node, &bucket->head, node) { - hlist_del_rcu(&elem->node); + + /* We are racing with sock_hash_delete_from_link to + * enter the spin-lock critical section. Every socket on + * the list is still linked to sockhash. Since link + * exists, psock exists and holds a ref to socket. That + * lets us to grab a socket ref too. + */ + raw_spin_lock_bh(&bucket->lock); + hlist_for_each_entry(elem, &bucket->head, node) + sock_hold(elem->sk); + hlist_move_list(&bucket->head, &unlink_list); + raw_spin_unlock_bh(&bucket->lock); + + /* Process removed entries out of atomic context to + * block for socket lock before deleting the psock's + * link to sockhash. + */ + hlist_for_each_entry_safe(elem, node, &unlink_list, node) { + hlist_del(&elem->node); lock_sock(elem->sk); rcu_read_lock(); sock_map_unref(elem->sk, elem); rcu_read_unlock(); release_sock(elem->sk); + sock_put(elem->sk); sock_hash_free_elem(htab, elem); } }
From: Jean-Philippe Brucker jean-philippe@linaro.org
[ Upstream commit 22d5bd6867364b41576a712755271a7d6161abd6 ]
Commit 60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe") removed the trace_[ku]probe structure from the trace_event_call->data pointer. As bpf_get_[ku]probe_info() were forgotten in that change, fix them now. These functions are currently only used by the bpf_task_fd_query() syscall handler to collect information about a perf event.
Fixes: 60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe") Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: Yonghong Song yhs@fb.com Acked-by: Masami Hiramatsu mhiramat@kernel.org Link: https://lore.kernel.org/bpf/20200608124531.819838-1-jean-philippe@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace_kprobe.c | 2 +- kernel/trace/trace_uprobe.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index fba4b48451f6..26de9c654956 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -1464,7 +1464,7 @@ int bpf_get_kprobe_info(const struct perf_event *event, u32 *fd_type, if (perf_type_tracepoint) tk = find_trace_kprobe(pevent, group); else - tk = event->tp_event->data; + tk = trace_kprobe_primary_from_call(event->tp_event); if (!tk) return -EINVAL;
diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c index 2619bc5ed520..5294843de6ef 100644 --- a/kernel/trace/trace_uprobe.c +++ b/kernel/trace/trace_uprobe.c @@ -1405,7 +1405,7 @@ int bpf_get_uprobe_info(const struct perf_event *event, u32 *fd_type, if (perf_type_tracepoint) tu = find_probe_event(pevent, group); else - tu = event->tp_event->data; + tu = trace_uprobe_primary_from_call(event->tp_event); if (!tu) return -EINVAL;
From: Jernej Skrabec jernej.skrabec@siol.net
[ Upstream commit 54e1e06bcf1cf6e7ac3f86daa5f7454add24b494 ]
m divider in DDC clock register is 4 bits wide. Fix that.
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net Reviewed-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://patchwork.freedesktop.org/patch/msgid/20200413095457.1176754-1-jerne... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/sun4i/sun4i_hdmi.h | 2 +- drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h index 7ad3f06c127e..00ca35f07ba5 100644 --- a/drivers/gpu/drm/sun4i/sun4i_hdmi.h +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h @@ -148,7 +148,7 @@ #define SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE 3
#define SUN4I_HDMI_DDC_CLK_REG 0x528 -#define SUN4I_HDMI_DDC_CLK_M(m) (((m) & 0x7) << 3) +#define SUN4I_HDMI_DDC_CLK_M(m) (((m) & 0xf) << 3) #define SUN4I_HDMI_DDC_CLK_N(n) ((n) & 0x7)
#define SUN4I_HDMI_DDC_LINE_CTRL_REG 0x540 diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c index 2ff780114106..12430b9d4e93 100644 --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c @@ -33,7 +33,7 @@ static unsigned long sun4i_ddc_calc_divider(unsigned long rate, unsigned long best_rate = 0; u8 best_m = 0, best_n = 0, _m, _n;
- for (_m = 0; _m < 8; _m++) { + for (_m = 0; _m < 16; _m++) { for (_n = 0; _n < 8; _n++) { unsigned long tmp_rate;
From: Andrii Nakryiko andriin@fb.com
[ Upstream commit 32022fd97ed34f6812802bf1288db27c313576f4 ]
Handle a GCC quirk of emitting extra volatile modifier in DWARF (and subsequently preserved in BTF by pahole) for function pointers marked as __attribute__((noreturn)). This was the way to mark such functions before GCC 2.5 added noreturn attribute. Drop such func_proto modifiers, similarly to how it's done for array (also to handle GCC quirk/bug).
Such volatile attribute is emitted by GCC only, so existing selftests can't express such test. Simple repro is like this (compiled with GCC + BTF generated by pahole):
struct my_struct { void __attribute__((noreturn)) (*fn)(int); }; struct my_struct a;
Without this fix, output will be:
struct my_struct { voidvolatile (*fn)(int); };
With the fix:
struct my_struct { void (*fn)(int); };
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion") Reported-by: Jean-Philippe Brucker jean-philippe@linaro.org Signed-off-by: Andrii Nakryiko andriin@fb.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Tested-by: Jean-Philippe Brucker jean-philippe@linaro.org Link: https://lore.kernel.org/bpf/20200610052335.2862559-1-andriin@fb.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/bpf/btf_dump.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c index 87f27e2664c5..d9e386b8f47e 100644 --- a/tools/lib/bpf/btf_dump.c +++ b/tools/lib/bpf/btf_dump.c @@ -1141,6 +1141,20 @@ static void btf_dump_emit_mods(struct btf_dump *d, struct id_stack *decl_stack) } }
+static void btf_dump_drop_mods(struct btf_dump *d, struct id_stack *decl_stack) +{ + const struct btf_type *t; + __u32 id; + + while (decl_stack->cnt) { + id = decl_stack->ids[decl_stack->cnt - 1]; + t = btf__type_by_id(d->btf, id); + if (!btf_is_mod(t)) + return; + decl_stack->cnt--; + } +} + static void btf_dump_emit_name(const struct btf_dump *d, const char *name, bool last_was_ptr) { @@ -1239,14 +1253,7 @@ static void btf_dump_emit_type_chain(struct btf_dump *d, * a const/volatile modifier for array, so we are * going to silently skip them here. */ - while (decls->cnt) { - next_id = decls->ids[decls->cnt - 1]; - next_t = btf__type_by_id(d->btf, next_id); - if (btf_is_mod(next_t)) - decls->cnt--; - else - break; - } + btf_dump_drop_mods(d, decls);
if (decls->cnt == 0) { btf_dump_emit_name(d, fname, last_was_ptr); @@ -1274,7 +1281,15 @@ static void btf_dump_emit_type_chain(struct btf_dump *d, __u16 vlen = btf_vlen(t); int i;
- btf_dump_emit_mods(d, decls); + /* + * GCC emits extra volatile qualifier for + * __attribute__((noreturn)) function pointers. Clang + * doesn't do it. It's a GCC quirk for backwards + * compatibility with code written for GCC <2.5. So, + * similarly to extra qualifiers for array, just drop + * them, instead of handling them. + */ + btf_dump_drop_mods(d, decls); if (decls->cnt) { btf_dump_printf(d, " ("); btf_dump_emit_type_chain(d, decls, fname, lvl);
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 42c76c9848e13dbe0538d7ae0147a269dfa859cb ]
'ret' is known to be 0 at this point. Explicitly return -ENOMEM if one of the 'ecardm_iomap()' calls fail.
Link: https://lore.kernel.org/r/20200530081622.577888-1-christophe.jaillet@wanadoo... Fixes: e95a1b656a98 ("[ARM] rpc: acornscsi: update to new style ecard driver") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/arm/acornscsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index d12dd89538df..deab66598910 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -2911,8 +2911,10 @@ static int acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
ashost->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); ashost->fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); - if (!ashost->base || !ashost->fast) + if (!ashost->base || !ashost->fast) { + ret = -ENOMEM; goto out_put; + }
host->irq = ec->irq; ashost->host = host;
From: Vitaly Kuznetsov vkuznets@redhat.com
[ Upstream commit 1f1fbc70c10e81f70e9fbe2102d439c883269811 ]
With commit dc20b2d52653 ("x86/idt: Move interrupt gate initialization to IDT code") non assigned system vectors are also marked as used in 'used_vectors' (now 'system_vectors') bitmap. This makes checks in arch_show_interrupts() whether a particular system vector is allocated to always pass and e.g. 'Hyper-V reenlightenment interrupts' entry always shows up in /proc/interrupts.
Another side effect of having all unassigned system vectors marked as used is that irq_matrix_debug_show() will wrongly count them among 'System' vectors.
As it is now ensured that alloc_intr_gate() is not called after init, it is possible to leave unused entries in 'system_vectors' unset to fix these issues.
Signed-off-by: Vitaly Kuznetsov vkuznets@redhat.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lkml.kernel.org/r/20200428093824.1451532-4-vkuznets@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/idt.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c index 87ef69a72c52..7bb4c3cbf4dc 100644 --- a/arch/x86/kernel/idt.c +++ b/arch/x86/kernel/idt.c @@ -318,7 +318,11 @@ void __init idt_setup_apic_and_irq_gates(void)
#ifdef CONFIG_X86_LOCAL_APIC for_each_clear_bit_from(i, system_vectors, NR_VECTORS) { - set_bit(i, system_vectors); + /* + * Don't set the non assigned system vectors in the + * system_vectors bitmap. Otherwise they show up in + * /proc/interrupts. + */ entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR); set_intr_gate(i, entry); }
From: YiFei Zhu zhuyifei1999@gmail.com
[ Upstream commit 0f5d82f187e1beda3fe7295dfc500af266a5bd80 ]
Added a check in the switch case on start_header that checks for the existence of the header, and in the case that MAC is not set and the caller requests for MAC, -EFAULT. If the caller requests for NET then MAC's existence is completely ignored.
There is no function to check NET header's existence and as far as cgroup_skb/egress is concerned it should always be set.
Removed for ptr >= the start of header, considering offset is bounded unsigned and should always be true. len <= end - mac is redundant to ptr + len <= end.
Fixes: 3eee1f75f2b9 ("bpf: fix bpf_skb_load_bytes_relative pkt length check") Signed-off-by: YiFei Zhu zhuyifei@google.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Reviewed-by: Stanislav Fomichev sdf@google.com Link: https://lore.kernel.org/bpf/76bb820ddb6a95f59a772ecbd8c8a336f646b362.1591812... Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/filter.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/net/core/filter.c b/net/core/filter.c index f1f2304822e3..a0a492f7cf9c 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1766,25 +1766,27 @@ BPF_CALL_5(bpf_skb_load_bytes_relative, const struct sk_buff *, skb, u32, offset, void *, to, u32, len, u32, start_header) { u8 *end = skb_tail_pointer(skb); - u8 *net = skb_network_header(skb); - u8 *mac = skb_mac_header(skb); - u8 *ptr; + u8 *start, *ptr;
- if (unlikely(offset > 0xffff || len > (end - mac))) + if (unlikely(offset > 0xffff)) goto err_clear;
switch (start_header) { case BPF_HDR_START_MAC: - ptr = mac + offset; + if (unlikely(!skb_mac_header_was_set(skb))) + goto err_clear; + start = skb_mac_header(skb); break; case BPF_HDR_START_NET: - ptr = net + offset; + start = skb_network_header(skb); break; default: goto err_clear; }
- if (likely(ptr >= mac && ptr + len <= end)) { + ptr = start + offset; + + if (likely(ptr + len <= end)) { memcpy(to, ptr, len); return 0; }
From: Christoph Hellwig hch@lst.de
[ Upstream commit b97120b15ebd3de51325084136d3b9c3cce656d6 ]
While the NVMe specification allows the device to access the host memory buffer in host DRAM from all power states, hosts will fail access to DRAM during S3 and similar power states.
Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend") Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Keith Busch kbusch@kernel.org Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index cd64ddb129e5..acbdf21b76ed 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2962,9 +2962,15 @@ static int nvme_suspend(struct device *dev) * the PCI bus layer to put it into D3 in order to take the PCIe link * down, so as to allow the platform to achieve its minimum low-power * state (which may not be possible if the link is up). + * + * If a host memory buffer is enabled, shut down the device as the NVMe + * specification allows the device to access the host memory buffer in + * host DRAM from all power states, but hosts will fail access to DRAM + * during S3. */ if (pm_suspend_via_firmware() || !ctrl->npss || !pcie_aspm_enabled(pdev) || + ndev->nr_host_mem_descs || (ndev->ctrl.quirks & NVME_QUIRK_SIMPLE_SUSPEND)) return nvme_disable_prepare_reset(ndev, true);
From: Zheng Bin zhengbin13@huawei.com
[ Upstream commit 3a39e778690500066b31fe982d18e2e394d3bce2 ]
Use the following command to test nfsv4(size of file1M is 1MB): mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt cp file1M /mnt du -h /mnt/file1M -->0 within 60s, then 1M
When write is done(cp file1M /mnt), will call this: nfs_writeback_done nfs4_write_done nfs4_write_done_cb nfs_writeback_update_inode nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime nfs_post_op_update_inode_force_wcc_locked nfs_set_cache_invalid nfs_refresh_inode_locked nfs_update_inode
nfsd write response contains change, ctime, mtime, the flag will be clear after nfs_update_inode. Howerver, write response does not contain space_used, previous open response contains space_used whose value is 0, so inode->i_blocks is still 0.
nfs_getattr -->called by "du -h" do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s cache_validity = READ_ONCE(NFS_I(inode)->cache_validity) do_update |= cache_validity & (NFS_INO_INVALID_ATTR -->false if (do_update) { __nfs_revalidate_inode }
Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M" is 0.
Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done.
Fixes: 16e143751727 ("NFS: More fine grained attribute tracking") Signed-off-by: Zheng Bin zhengbin13@huawei.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/inode.c | 14 +++++++++++--- include/linux/nfs_fs.h | 1 + 2 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 3802c88e8372..6de41f741280 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -826,6 +826,8 @@ int nfs_getattr(const struct path *path, struct kstat *stat, do_update |= cache_validity & NFS_INO_INVALID_ATIME; if (request_mask & (STATX_CTIME|STATX_MTIME)) do_update |= cache_validity & NFS_INO_REVAL_PAGECACHE; + if (request_mask & STATX_BLOCKS) + do_update |= cache_validity & NFS_INO_INVALID_BLOCKS; if (do_update) { /* Update the attribute cache */ if (!(server->flags & NFS_MOUNT_NOAC)) @@ -1750,7 +1752,8 @@ int nfs_post_op_update_inode_force_wcc_locked(struct inode *inode, struct nfs_fa status = nfs_post_op_update_inode_locked(inode, fattr, NFS_INO_INVALID_CHANGE | NFS_INO_INVALID_CTIME - | NFS_INO_INVALID_MTIME); + | NFS_INO_INVALID_MTIME + | NFS_INO_INVALID_BLOCKS); return status; }
@@ -1857,7 +1860,8 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ATIME | NFS_INO_REVAL_FORCED - | NFS_INO_REVAL_PAGECACHE); + | NFS_INO_REVAL_PAGECACHE + | NFS_INO_INVALID_BLOCKS);
/* Do atomic weak cache consistency updates */ nfs_wcc_update_inode(inode, fattr); @@ -2019,8 +2023,12 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) inode->i_blocks = nfs_calc_block_size(fattr->du.nfs3.used); } else if (fattr->valid & NFS_ATTR_FATTR_BLOCKS_USED) inode->i_blocks = fattr->du.nfs2.blocks; - else + else { + nfsi->cache_validity |= save_cache_validity & + (NFS_INO_INVALID_BLOCKS + | NFS_INO_REVAL_FORCED); cache_revalidated = false; + }
/* Update attrtimeo value if we're out of the unstable period */ if (attr_changed) { diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 570a60c2f4f4..ad09c0cc5464 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -225,6 +225,7 @@ struct nfs4_copy_state { #define NFS_INO_INVALID_OTHER BIT(12) /* other attrs are invalid */ #define NFS_INO_DATA_INVAL_DEFER \ BIT(13) /* Deferred cache invalidation */ +#define NFS_INO_INVALID_BLOCKS BIT(14) /* cached blocks are invalid */
#define NFS_INO_INVALID_ATTR (NFS_INO_INVALID_CHANGE \ | NFS_INO_INVALID_CTIME \
From: Li RongQing lirongqing@baidu.com
[ Upstream commit aa2cad0600ed2ca6a0ab39948d4db1666b6c962b ]
Propagate sock_alloc_send_skb error code, not set it to EAGAIN unconditionally, when fail to allocate skb, which might cause that user space unnecessary loops.
Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Li RongQing lirongqing@baidu.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Björn Töpel bjorn.topel@intel.com Link: https://lore.kernel.org/bpf/1591852266-24017-1-git-send-email-lirongqing@bai... Signed-off-by: Sasha Levin sashal@kernel.org --- net/xdp/xsk.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 7181a30666b4..f9eb5efb237c 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -362,10 +362,8 @@ static int xsk_generic_xmit(struct sock *sk)
len = desc.len; skb = sock_alloc_send_skb(sk, len, 1, &err); - if (unlikely(!skb)) { - err = -EAGAIN; + if (unlikely(!skb)) goto out; - }
skb_put(skb, len); addr = desc.addr;
From: Brett Creeley brett.creeley@intel.com
[ Upstream commit e0ef26fbe2b0c62f42ba7667076dc38b693b6fb8 ]
Link speeds are communicated over virtchnl using an enum virtchnl_link_speed. Currently, the highest link speed is 40Gbps which leaves us unable to reflect some speeds that an ice VF is capable of. This causes link speed to be misreported on the iavf driver.
Allow for communicating link speeds using Mbps so that the proper speed can be reported for an ice VF. Moving away from the enum allows us to communicate future speed changes without requiring a new enum to be added.
In order to support communicating link speeds over virtchnl in Mbps the following functionality was added: - Added u32 link_speed_mbps in the iavf_adapter structure. - Added the macro ADV_LINK_SUPPORT(_a) to determine if the VF driver supports communicating link speeds in Mbps. - Added the function iavf_get_vpe_link_status() to fill the correct link_status in the event_data union based on the ADV_LINK_SUPPORT(_a) macro. - Added the function iavf_set_adapter_link_speed_from_vpe() to determine whether or not to fill the u32 link_speed_mbps or enum virtchnl_link_speed link_speed field in the iavf_adapter structure based on the ADV_LINK_SUPPORT(_a) macro. - Do not free vf_res in iavf_init_get_resources() as vf_res will be accessed in iavf_get_link_ksettings(); memset to 0 instead. This memory is subsequently freed in iavf_remove().
Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations") Signed-off-by: Brett Creeley brett.creeley@intel.com Signed-off-by: Sergey Nemov sergey.nemov@intel.com Signed-off-by: Paul Greenwalt paul.greenwalt@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/iavf/iavf.h | 14 +++ .../net/ethernet/intel/iavf/iavf_ethtool.c | 14 ++- drivers/net/ethernet/intel/iavf/iavf_main.c | 25 ++++-- .../net/ethernet/intel/iavf/iavf_virtchnl.c | 88 ++++++++++++++++--- 4 files changed, 120 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h index bd1b1ed323f4..6b9117a350fa 100644 --- a/drivers/net/ethernet/intel/iavf/iavf.h +++ b/drivers/net/ethernet/intel/iavf/iavf.h @@ -87,6 +87,10 @@ struct iavf_vsi { #define IAVF_HLUT_ARRAY_SIZE ((IAVF_VFQF_HLUT_MAX_INDEX + 1) * 4) #define IAVF_MBPS_DIVISOR 125000 /* divisor to convert to Mbps */
+#define IAVF_VIRTCHNL_VF_RESOURCE_SIZE (sizeof(struct virtchnl_vf_resource) + \ + (IAVF_MAX_VF_VSI * \ + sizeof(struct virtchnl_vsi_resource))) + /* MAX_MSIX_Q_VECTORS of these are allocated, * but we only use one per queue-specific vector. */ @@ -306,6 +310,14 @@ struct iavf_adapter { bool netdev_registered; bool link_up; enum virtchnl_link_speed link_speed; + /* This is only populated if the VIRTCHNL_VF_CAP_ADV_LINK_SPEED is set + * in vf_res->vf_cap_flags. Use ADV_LINK_SUPPORT macro to determine if + * this field is valid. This field should be used going forward and the + * enum virtchnl_link_speed above should be considered the legacy way of + * storing/communicating link speeds. + */ + u32 link_speed_mbps; + enum virtchnl_ops current_op; #define CLIENT_ALLOWED(_a) ((_a)->vf_res ? \ (_a)->vf_res->vf_cap_flags & \ @@ -322,6 +334,8 @@ struct iavf_adapter { VIRTCHNL_VF_OFFLOAD_RSS_PF))) #define VLAN_ALLOWED(_a) ((_a)->vf_res->vf_cap_flags & \ VIRTCHNL_VF_OFFLOAD_VLAN) +#define ADV_LINK_SUPPORT(_a) ((_a)->vf_res->vf_cap_flags & \ + VIRTCHNL_VF_CAP_ADV_LINK_SPEED) struct virtchnl_vf_resource *vf_res; /* incl. all VSIs */ struct virtchnl_vsi_resource *vsi_res; /* our LAN VSI */ struct virtchnl_version_info pf_version; diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c index dad3eec8ccd8..758bef02a2a8 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -278,7 +278,18 @@ static int iavf_get_link_ksettings(struct net_device *netdev, ethtool_link_ksettings_zero_link_mode(cmd, supported); cmd->base.autoneg = AUTONEG_DISABLE; cmd->base.port = PORT_NONE; - /* Set speed and duplex */ + cmd->base.duplex = DUPLEX_FULL; + + if (ADV_LINK_SUPPORT(adapter)) { + if (adapter->link_speed_mbps && + adapter->link_speed_mbps < U32_MAX) + cmd->base.speed = adapter->link_speed_mbps; + else + cmd->base.speed = SPEED_UNKNOWN; + + return 0; + } + switch (adapter->link_speed) { case IAVF_LINK_SPEED_40GB: cmd->base.speed = SPEED_40000; @@ -306,7 +317,6 @@ static int iavf_get_link_ksettings(struct net_device *netdev, default: break; } - cmd->base.duplex = DUPLEX_FULL;
return 0; } diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 8e16be960e96..bacc5fb7eba2 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -1756,17 +1756,17 @@ static int iavf_init_get_resources(struct iavf_adapter *adapter) struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; struct iavf_hw *hw = &adapter->hw; - int err = 0, bufsz; + int err;
WARN_ON(adapter->state != __IAVF_INIT_GET_RESOURCES); /* aq msg sent, awaiting reply */ if (!adapter->vf_res) { - bufsz = sizeof(struct virtchnl_vf_resource) + - (IAVF_MAX_VF_VSI * - sizeof(struct virtchnl_vsi_resource)); - adapter->vf_res = kzalloc(bufsz, GFP_KERNEL); - if (!adapter->vf_res) + adapter->vf_res = kzalloc(IAVF_VIRTCHNL_VF_RESOURCE_SIZE, + GFP_KERNEL); + if (!adapter->vf_res) { + err = -ENOMEM; goto err; + } } err = iavf_get_vf_config(adapter); if (err == IAVF_ERR_ADMIN_QUEUE_NO_WORK) { @@ -2036,7 +2036,7 @@ static void iavf_disable_vf(struct iavf_adapter *adapter) iavf_reset_interrupt_capability(adapter); iavf_free_queues(adapter); iavf_free_q_vectors(adapter); - kfree(adapter->vf_res); + memset(adapter->vf_res, 0, IAVF_VIRTCHNL_VF_RESOURCE_SIZE); iavf_shutdown_adminq(&adapter->hw); adapter->netdev->flags &= ~IFF_UP; clear_bit(__IAVF_IN_CRITICAL_TASK, &adapter->crit_section); @@ -2487,6 +2487,16 @@ static int iavf_validate_tx_bandwidth(struct iavf_adapter *adapter, { int speed = 0, ret = 0;
+ if (ADV_LINK_SUPPORT(adapter)) { + if (adapter->link_speed_mbps < U32_MAX) { + speed = adapter->link_speed_mbps; + goto validate_bw; + } else { + dev_err(&adapter->pdev->dev, "Unknown link speed\n"); + return -EINVAL; + } + } + switch (adapter->link_speed) { case IAVF_LINK_SPEED_40GB: speed = 40000; @@ -2510,6 +2520,7 @@ static int iavf_validate_tx_bandwidth(struct iavf_adapter *adapter, break; }
+validate_bw: if (max_tx_rate > speed) { dev_err(&adapter->pdev->dev, "Invalid tx rate specified\n"); diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c index 1ab9cb339acb..9655318803b7 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c +++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c @@ -139,7 +139,8 @@ int iavf_send_vf_config_msg(struct iavf_adapter *adapter) VIRTCHNL_VF_OFFLOAD_ENCAP | VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM | VIRTCHNL_VF_OFFLOAD_REQ_QUEUES | - VIRTCHNL_VF_OFFLOAD_ADQ; + VIRTCHNL_VF_OFFLOAD_ADQ | + VIRTCHNL_VF_CAP_ADV_LINK_SPEED;
adapter->current_op = VIRTCHNL_OP_GET_VF_RESOURCES; adapter->aq_required &= ~IAVF_FLAG_AQ_GET_CONFIG; @@ -918,6 +919,8 @@ void iavf_disable_vlan_stripping(struct iavf_adapter *adapter) iavf_send_pf_msg(adapter, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING, NULL, 0); }
+#define IAVF_MAX_SPEED_STRLEN 13 + /** * iavf_print_link_message - print link up or down * @adapter: adapter structure @@ -927,37 +930,99 @@ void iavf_disable_vlan_stripping(struct iavf_adapter *adapter) static void iavf_print_link_message(struct iavf_adapter *adapter) { struct net_device *netdev = adapter->netdev; - char *speed = "Unknown "; + int link_speed_mbps; + char *speed;
if (!adapter->link_up) { netdev_info(netdev, "NIC Link is Down\n"); return; }
+ speed = kcalloc(1, IAVF_MAX_SPEED_STRLEN, GFP_KERNEL); + if (!speed) + return; + + if (ADV_LINK_SUPPORT(adapter)) { + link_speed_mbps = adapter->link_speed_mbps; + goto print_link_msg; + } + switch (adapter->link_speed) { case IAVF_LINK_SPEED_40GB: - speed = "40 G"; + link_speed_mbps = SPEED_40000; break; case IAVF_LINK_SPEED_25GB: - speed = "25 G"; + link_speed_mbps = SPEED_25000; break; case IAVF_LINK_SPEED_20GB: - speed = "20 G"; + link_speed_mbps = SPEED_20000; break; case IAVF_LINK_SPEED_10GB: - speed = "10 G"; + link_speed_mbps = SPEED_10000; break; case IAVF_LINK_SPEED_1GB: - speed = "1000 M"; + link_speed_mbps = SPEED_1000; break; case IAVF_LINK_SPEED_100MB: - speed = "100 M"; + link_speed_mbps = SPEED_100; break; default: + link_speed_mbps = SPEED_UNKNOWN; break; }
- netdev_info(netdev, "NIC Link is Up %sbps Full Duplex\n", speed); +print_link_msg: + if (link_speed_mbps > SPEED_1000) { + if (link_speed_mbps == SPEED_2500) + snprintf(speed, IAVF_MAX_SPEED_STRLEN, "2.5 Gbps"); + else + /* convert to Gbps inline */ + snprintf(speed, IAVF_MAX_SPEED_STRLEN, "%d %s", + link_speed_mbps / 1000, "Gbps"); + } else if (link_speed_mbps == SPEED_UNKNOWN) { + snprintf(speed, IAVF_MAX_SPEED_STRLEN, "%s", "Unknown Mbps"); + } else { + snprintf(speed, IAVF_MAX_SPEED_STRLEN, "%u %s", + link_speed_mbps, "Mbps"); + } + + netdev_info(netdev, "NIC Link is Up Speed is %s Full Duplex\n", speed); + kfree(speed); +} + +/** + * iavf_get_vpe_link_status + * @adapter: adapter structure + * @vpe: virtchnl_pf_event structure + * + * Helper function for determining the link status + **/ +static bool +iavf_get_vpe_link_status(struct iavf_adapter *adapter, + struct virtchnl_pf_event *vpe) +{ + if (ADV_LINK_SUPPORT(adapter)) + return vpe->event_data.link_event_adv.link_status; + else + return vpe->event_data.link_event.link_status; +} + +/** + * iavf_set_adapter_link_speed_from_vpe + * @adapter: adapter structure for which we are setting the link speed + * @vpe: virtchnl_pf_event structure that contains the link speed we are setting + * + * Helper function for setting iavf_adapter link speed + **/ +static void +iavf_set_adapter_link_speed_from_vpe(struct iavf_adapter *adapter, + struct virtchnl_pf_event *vpe) +{ + if (ADV_LINK_SUPPORT(adapter)) + adapter->link_speed_mbps = + vpe->event_data.link_event_adv.link_speed; + else + adapter->link_speed = vpe->event_data.link_event.link_speed; }
/** @@ -1187,12 +1252,11 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter, if (v_opcode == VIRTCHNL_OP_EVENT) { struct virtchnl_pf_event *vpe = (struct virtchnl_pf_event *)msg; - bool link_up = vpe->event_data.link_event.link_status; + bool link_up = iavf_get_vpe_link_status(adapter, vpe);
switch (vpe->event) { case VIRTCHNL_EVENT_LINK_CHANGE: - adapter->link_speed = - vpe->event_data.link_event.link_speed; + iavf_set_adapter_link_speed_from_vpe(adapter, vpe);
/* we've already got the right link status, bail */ if (adapter->link_up == link_up)
From: Andrey Ignatov rdna@fb.com
[ Upstream commit 60e5ca8a64bad8f3e2e20a1e57846e497361c700 ]
Add missed bpf_map_charge_init() in sock_hash_alloc() and correspondingly bpf_map_charge_finish() on ENOMEM.
It was found accidentally while working on unrelated selftest that checks "map->memory.pages > 0" is true for all map types.
Before: # bpftool m l ... 3692: sockhash name m_sockhash flags 0x0 key 4B value 4B max_entries 8 memlock 0B
After: # bpftool m l ... 84: sockmap name m_sockmap flags 0x0 key 4B value 4B max_entries 8 memlock 4096B
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Andrey Ignatov rdna@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Link: https://lore.kernel.org/bpf/20200612000857.2881453-1-rdna@fb.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/sock_map.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/core/sock_map.c b/net/core/sock_map.c index b22e9f119180..6bbc118bf00e 100644 --- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -837,11 +837,15 @@ static struct bpf_map *sock_hash_alloc(union bpf_attr *attr) err = -EINVAL; goto free_htab; } + err = bpf_map_charge_init(&htab->map.memory, cost); + if (err) + goto free_htab;
htab->buckets = bpf_map_area_alloc(htab->buckets_num * sizeof(struct bpf_htab_bucket), htab->map.numa_node); if (!htab->buckets) { + bpf_map_charge_finish(&htab->map.memory); err = -ENOMEM; goto free_htab; }
linux-stable-mirror@lists.linaro.org
-
Alex Williamson -
Dragan Cvetic -
Naresh Kamboju -
Sasha Levin