On Sun, Aug 18, 2019 at 2:00 PM CKI Project cki-project@redhat.com wrote:

Hello,

We ran automated tests on a patchset that was proposed for merging into this kernel tree. The patches were applied to:

   Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
        Commit: aad39e30fb9e - Linux 5.2.9

The results of these automated tests are provided below.

Overall result: FAILED (see details below)
         Merge: OK
       Compile: OK
         Tests: FAILED

All kernel binaries, config files, and logs are available for download here:

https://artifacts.cki-project.org/pipelines/108109

One or more kernel tests failed:

ppc64le: ❌ selinux-policy: serge-testsuite

FYI, this is a false negative - the test ran on a machine that had two network interfaces with the same IPv4 address assigned, which confused the SCTP test in the testsuite... I'l try to fix this corner case when I find the time.

We hope that these logs can help you find the problem quickly. For the full detail on our testing procedures, please scroll to the bottom of this message.

Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective.

    ,-.   ,-.
   ( C ) ( K )  Continuous
    `-',-.`-'   Kernel
      ( I )     Integration
       `-'

---

Merge testing

We cloned this repository and checked out the following commit:

Repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: aad39e30fb9e - Linux 5.2.9

We grabbed the 6876cde84f1c commit of the stable queue repository.

We then merged the patchset with `git am`:

keys-trusted-allow-module-init-if-tpm-is-inactive-or-deactivated.patch sh-kernel-hw_breakpoint-fix-missing-break-in-switch-statement.patch seq_file-fix-problem-when-seeking-mid-record.patch mm-hmm-fix-bad-subpage-pointer-in-try_to_unmap_one.patch mm-mempolicy-make-the-behavior-consistent-when-mpol_mf_move-and-mpol_mf_strict-were-specified.patch mm-mempolicy-handle-vma-with-unmovable-pages-mapped-correctly-in-mbind.patch mm-z3fold.c-fix-z3fold_destroy_pool-ordering.patch mm-z3fold.c-fix-z3fold_destroy_pool-race-condition.patch mm-memcontrol.c-fix-use-after-free-in-mem_cgroup_iter.patch mm-usercopy-use-memory-range-to-be-accessed-for-wraparound-check.patch mm-vmscan-do-not-special-case-slab-reclaim-when-watermarks-are-boosted.patch cpufreq-schedutil-don-t-skip-freq-update-when-limits-change.patch drm-amdgpu-fix-gfx9-soft-recovery.patch drm-nouveau-only-recalculate-pbn-vcpi-on-mode-connector-changes.patch xtensa-add-missing-isync-to-the-cpu_reset-tlb-code.patch arm64-ftrace-ensure-module-ftrace-trampoline-is-coherent-with-i-side.patch alsa-hda-realtek-add-quirk-for-hp-envy-x360.patch alsa-usb-audio-fix-a-stack-buffer-overflow-bug-in-check_input_term.patch alsa-usb-audio-fix-an-oob-bug-in-parse_audio_mixer_unit.patch alsa-hda-apply-workaround-for-another-amd-chip-1022-1487.patch alsa-hda-fix-a-memory-leak-bug.patch alsa-hda-add-a-generic-reboot_notify.patch alsa-hda-let-all-conexant-codec-enter-d3-when-rebooting.patch

Compile testing

We compiled the kernel for 3 architectures:

aarch64:
  make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg

ppc64le:
  make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg

x86_64:
  make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg

Hardware testing

We booted each kernel and ran the following tests:

aarch64: Host 1: ✅ Boot test [0] ✅ Podman system integration test (as root) [1] ✅ Podman system integration test (as user) [1] ✅ LTP lite [2] ✅ Loopdev Sanity [3] ✅ jvm test suite [4] ✅ AMTU (Abstract Machine Test Utility) [5] ✅ LTP: openposix test suite [6] ✅ audit: audit testsuite test [7] ✅ httpd: mod_ssl smoke sanity [8] ✅ iotop: sanity [9] ✅ tuned: tune-processes-through-perf [10] ✅ Usex - version 1.9-29 [11]

  Host 2:
     ✅ Boot test [0]
     ✅ xfstests: xfs [12]
     ✅ selinux-policy: serge-testsuite [13]

ppc64le: Host 1: ✅ Boot test [0] ✅ xfstests: xfs [12] ❌ selinux-policy: serge-testsuite [13]

  Host 2:
     ✅ Boot test [0]
     ✅ Podman system integration test (as root) [1]
     ✅ Podman system integration test (as user) [1]
     ✅ LTP lite [2]
     ✅ Loopdev Sanity [3]
     ✅ jvm test suite [4]
     ✅ AMTU (Abstract Machine Test Utility) [5]
     ✅ LTP: openposix test suite [6]
     ✅ audit: audit testsuite test [7]
     ✅ httpd: mod_ssl smoke sanity [8]
     ✅ iotop: sanity [9]
     ✅ tuned: tune-processes-through-perf [10]
     ✅ Usex - version 1.9-29 [11]

x86_64: Host 1: ✅ Boot test [0] ✅ Podman system integration test (as root) [1] ✅ Podman system integration test (as user) [1] ✅ LTP lite [2] ✅ Loopdev Sanity [3] ✅ jvm test suite [4] ✅ AMTU (Abstract Machine Test Utility) [5] ✅ LTP: openposix test suite [6] ✅ audit: audit testsuite test [7] ✅ httpd: mod_ssl smoke sanity [8] ✅ iotop: sanity [9] ✅ tuned: tune-processes-through-perf [10] ✅ pciutils: sanity smoke test [14] ✅ Usex - version 1.9-29 [11] ✅ stress: stress-ng [15]

  Host 2:
     ✅ Boot test [0]
     ✅ xfstests: xfs [12]
     ✅ selinux-policy: serge-testsuite [13]

Test source: Pull requests are welcome for new tests or improvements to existing tests! [0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/... [1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/container/po... [2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/... [3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/l... [4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/jvm [5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu [6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/... [7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audi... [8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/http... [9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/ioto... [10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tune... [11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/use... [12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/filesystems/... [13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/sel... [14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#pciutils/sani... [15]: https://github.com/CKI-project/tests-beaker/archive/master.zip#stress/stress...

Waived tests

If the test run included waived tests, they are marked with . Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed.