The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 851bd21cdb55e727ab29280bc9f6b678164f802a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2024120655-grumble-camcorder-7549@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 851bd21cdb55e727ab29280bc9f6b678164f802a Mon Sep 17 00:00:00 2001 From: Frank Li Frank.Li@nxp.com Date: Mon, 21 Oct 2024 11:45:08 -0400 Subject: [PATCH] i3c: master: Fix dynamic address leak when 'assigned-address' is present

If the DTS contains 'assigned-address', a dynamic address leak occurs during hotjoin events.

Assume a device have assigned-address 0xb. - Device issue Hotjoin - Call i3c_master_do_daa() - Call driver xxx_do_daa() - Call i3c_master_get_free_addr() to get dynamic address 0x9 - i3c_master_add_i3c_dev_locked(0x9) - expected_dyn_addr = newdev->boardinfo->init_dyn_addr (0xb); - i3c_master_reattach_i3c_dev(newdev(0xb), old_dyn_addr(0x9)); - if (dev->info.dyn_addr != old_dyn_addr && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0x9 -> TRUE (!dev->boardinfo || ^^^^^^^^^^^^^^^ -> FALSE dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0xb -> FALSE ... i3c_bus_set_addr_slot_status(&master->bus, old_dyn_addr, I3C_ADDR_SLOT_FREE); ^^^ This will be skipped. So old_dyn_addr never free }

- i3c_master_get_free_addr() will return increased sequence number.

Remove dev->info.dyn_addr != dev->boardinfo->init_dyn_addr condition check. dev->info.dyn_addr should be checked before calling this function because i3c_master_setnewda_locked() has already been called and the target device has already accepted dyn_addr. It is too late to check if dyn_addr is free in i3c_master_reattach_i3c_dev().

Add check to ensure expected_dyn_addr is free before i3c_master_setnewda_locked().

Fixes: cc3a392d69b6 ("i3c: master: fix for SETDASA and DAA process") Cc: stable@kernel.org Reviewed-by: Miquel Raynal miquel.raynal@bootlin.com Signed-off-by: Frank Li Frank.Li@nxp.com Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-3-4098b8bde01e@nxp.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c index 1bf9cb138f77..5a089be7e072 100644 --- a/drivers/i3c/master.c +++ b/drivers/i3c/master.c @@ -1548,16 +1548,9 @@ static int i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev, u8 old_dyn_addr) { struct i3c_master_controller *master = i3c_dev_get_master(dev); - enum i3c_addr_slot_status status; int ret;

- if (dev->info.dyn_addr != old_dyn_addr && - (!dev->boardinfo || - dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) { - status = i3c_bus_get_addr_slot_status(&master->bus, - dev->info.dyn_addr); - if (status != I3C_ADDR_SLOT_FREE) - return -EBUSY; + if (dev->info.dyn_addr != old_dyn_addr) { i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, I3C_ADDR_SLOT_I3C_DEV); @@ -1960,9 +1953,10 @@ static int i3c_master_bus_init(struct i3c_master_controller *master) goto err_rstdaa; }

+ /* Do not mark as occupied until real device exist in bus */ i3c_bus_set_addr_slot_status_mask(&master->bus, i3cboardinfo->init_dyn_addr, - I3C_ADDR_SLOT_I3C_DEV | I3C_ADDR_SLOT_EXT_DESIRED, + I3C_ADDR_SLOT_EXT_DESIRED, I3C_ADDR_SLOT_EXT_STATUS_MASK);

/* @@ -2126,7 +2120,8 @@ int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, else expected_dyn_addr = newdev->info.dyn_addr;

- if (newdev->info.dyn_addr != expected_dyn_addr) { + if (newdev->info.dyn_addr != expected_dyn_addr && + i3c_bus_get_addr_slot_status(&master->bus, expected_dyn_addr) == I3C_ADDR_SLOT_FREE) { /* * Try to apply the expected dynamic address. If it fails, keep * the address assigned by the master.