From: Florian Westphal fw@strlen.de

[ Upstream commit 35e6103861a3a970de6c84688c6e7a1f65b164ca ]

The check assumes that in transport mode, the first templates family must match the address family of the policy selector.

Syzkaller managed to build a template using MODE_ROUTEOPTIMIZATION, with ipv4-in-ipv6 chain, leading to following splat:

BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x1db/0x1854 Read of size 4 at addr ffff888063e57aa0 by task a.out/2050 xfrm_state_find+0x1db/0x1854 xfrm_tmpl_resolve+0x100/0x1d0 xfrm_resolve_and_create_bundle+0x108/0x1000 [..]

Problem is that addresses point into flowi4 struct, but xfrm_state_find treats them as being ipv6 because it uses templ->encap_family is used (AF_INET6 in case of reproducer) rather than family (AF_INET).

This patch inverts the logic: Enforce 'template family must match selector' EXCEPT for tunnel and BEET mode.

In BEET and Tunnel mode, xfrm_tmpl_resolve_one will have remote/local address pointers changed to point at the addresses found in the template, rather than the flowi ones, so no oob read will occur.

Reported-by: 3ntr0py1337@gmail.com Reported-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xfrm/xfrm_user.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 566919838d5e8..ab557827aac05 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1488,10 +1488,15 @@ static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family) if (!ut[i].family) ut[i].family = family;

- if ((ut[i].mode == XFRM_MODE_TRANSPORT) && - (ut[i].family != prev_family)) - return -EINVAL; - + switch (ut[i].mode) { + case XFRM_MODE_TUNNEL: + case XFRM_MODE_BEET: + break; + default: + if (ut[i].family != prev_family) + return -EINVAL; + break; + } if (ut[i].mode >= XFRM_MODE_MAX) return -EINVAL;

From: Florian Westphal fw@strlen.de

[ Upstream commit 12c44aba6618b7f6c437076e5722237190f6cd5f ]

Using standard integer type was fine while all operations on it were guarded by the nftnl subsys mutex.

This isn't true anymore: 1. transactions are guarded only by a pernet mutex, so concurrent rule manipulation in different netns is racy 2. the ->destroy hook runs from a work queue after the transaction mutex has been released already.

cpu0 cpu1 (net 1) cpu2 (net 2) kworker nft_compat->destroy nft_compat->init nft_compat->init if (--nft_xt->ref == 0) nft_xt->ref++ nft_xt->ref++

Switch to refcount_t. Doing this however only fixes a minor aspect, nft_compat also performs linked-list operations in an unsafe way.

This is addressed in the next two patches.

Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions") Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release") Reported-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_compat.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index 29d6fc73caf99..3e629ee59ddab 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -26,7 +26,7 @@ struct nft_xt { struct list_head head; struct nft_expr_ops ops; - unsigned int refcnt; + refcount_t refcnt;

/* Unlike other expressions, ops doesn't have static storage duration. * nft core assumes they do. We use kfree_rcu so that nft core can @@ -45,7 +45,7 @@ struct nft_xt_match_priv {

static bool nft_xt_put(struct nft_xt *xt) { - if (--xt->refcnt == 0) { + if (refcount_dec_and_test(&xt->refcnt)) { list_del(&xt->head); kfree_rcu(xt, rcu_head); return true; @@ -273,7 +273,7 @@ nft_target_init(const struct nft_ctx *ctx, const struct nft_expr *expr, return -EINVAL;

nft_xt = container_of(expr->ops, struct nft_xt, ops); - nft_xt->refcnt++; + refcount_inc(&nft_xt->refcnt); return 0; }

@@ -467,7 +467,7 @@ __nft_match_init(const struct nft_ctx *ctx, const struct nft_expr *expr, return ret;

nft_xt = container_of(expr->ops, struct nft_xt, ops); - nft_xt->refcnt++; + refcount_inc(&nft_xt->refcnt); return 0; }

@@ -769,7 +769,7 @@ nft_match_select_ops(const struct nft_ctx *ctx, goto err; }

- nft_match->refcnt = 0; + refcount_set(&nft_match->refcnt, 0); nft_match->ops.type = &nft_match_type; nft_match->ops.eval = nft_match_eval; nft_match->ops.init = nft_match_init; @@ -873,7 +873,7 @@ nft_target_select_ops(const struct nft_ctx *ctx, goto err; }

- nft_target->refcnt = 0; + refcount_set(&nft_target->refcnt, 0); nft_target->ops.type = &nft_target_type; nft_target->ops.size = NFT_EXPR_SIZE(XT_ALIGN(target->targetsize)); nft_target->ops.init = nft_target_init; @@ -944,7 +944,7 @@ static void __exit nft_compat_module_exit(void) list_for_each_entry_safe(xt, next, &nft_target_list, head) { struct xt_target *target = xt->ops.data;

- if (WARN_ON_ONCE(xt->refcnt)) + if (WARN_ON_ONCE(refcount_read(&xt->refcnt))) continue; module_put(target->me); kfree(xt); @@ -953,7 +953,7 @@ static void __exit nft_compat_module_exit(void) list_for_each_entry_safe(xt, next, &nft_match_list, head) { struct xt_match *match = xt->ops.data;

- if (WARN_ON_ONCE(xt->refcnt)) + if (WARN_ON_ONCE(refcount_read(&xt->refcnt))) continue; module_put(match->me); kfree(xt);

From: Andi Kleen ak@linux.intel.com

[ Upstream commit 96167167b6e17b25c0e05ecc31119b73baeab094 ]

'perf script' crashes currently when printing mixed trace points and other events because the trace format does not handle events without trace meta data. Add a simple check to avoid that.

% cat > test.c main() { printf("Hello world\n"); } ^D % gcc -g -o test test.c % sudo perf probe -x test 'test.c:3' % perf record -e '{cpu/cpu-cycles,period=10000/,probe_test:main}:S' ./test % perf script <segfault>

Committer testing:

Before:

# perf probe -x /lib64/libc-2.28.so malloc Added new event: probe_libc:malloc (on malloc in /usr/lib64/libc-2.28.so)

You can now use it in all perf tools, such as:

perf record -e probe_libc:malloc -aR sleep 1

# perf probe -l probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.28.so) # perf record -e '{cpu/cpu-cycles,period=10000/,probe_libc:*}:S' sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.023 MB perf.data (40 samples) ] # perf script Segmentation fault (core dumped) ^C #

After:

# perf script | head -6 sleep 2888 94796.944981: 16198 cpu/cpu-cycles,period=10000/: ffffffff925dc04f get_random_u32+0x1f (/lib/modules/5.0.0-rc2+/build/vmlinux) sleep 2888 [-01] 94796.944981: probe_libc:malloc: sleep 2888 94796.944983: 4713 cpu/cpu-cycles,period=10000/: ffffffff922763af change_protection+0xcf (/lib/modules/5.0.0-rc2+/build/vmlinux) sleep 2888 [-01] 94796.944983: probe_libc:malloc: sleep 2888 94796.944986: 9934 cpu/cpu-cycles,period=10000/: ffffffff922777e0 move_page_tables+0x0 (/lib/modules/5.0.0-rc2+/build/vmlinux) sleep 2888 [-01] 94796.944986: probe_libc:malloc: #

Signed-off-by: Andi Kleen ak@linux.intel.com Tested-by: Arnaldo Carvalho de Melo acme@redhat.com Acked-by: Jiri Olsa jolsa@kernel.org Link: http://lkml.kernel.org/r/20190117194834.21940-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/builtin-script.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index 6c1e7ceedcf30..ce2aee11e3605 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -1658,7 +1658,7 @@ static void process_event(struct perf_script *script, return; }

- if (PRINT_FIELD(TRACE)) { + if (PRINT_FIELD(TRACE) && sample->raw_data) { event_format__fprintf(evsel->tp_format, sample->cpu, sample->raw_data, sample->raw_size, fp); }

From: Stephane Eranian eranian@google.com

[ Upstream commit 1497e804d1a6e2bd9107ddf64b0310449f4673eb ]

This patch fixes an issue in cpumap.c when used with the TOPOLOGY header. In some configurations, some NUMA nodes may have no CPU (empty cpulist). Yet a cpumap map must be created otherwise perf abort with an error. This patch handles this case by creating a dummy map.

Before:

$ perf record -o - -e cycles noploop 2 | perf script -i - 0x6e8 [0x6c]: failed to process type: 80

After:

$ perf record -o - -e cycles noploop 2 | perf script -i - noploop for 2 seconds

Signed-off-by: Stephane Eranian eranian@google.com Acked-by: Jiri Olsa jolsa@kernel.org Cc: Andi Kleen ak@linux.intel.com Cc: Kan Liang kan.liang@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Link: http://lkml.kernel.org/r/1547885559-1657-1-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/cpumap.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c index 1ccbd33420694..383674f448fcd 100644 --- a/tools/perf/util/cpumap.c +++ b/tools/perf/util/cpumap.c @@ -134,7 +134,12 @@ struct cpu_map *cpu_map__new(const char *cpu_list) if (!cpu_list) return cpu_map__read_all_cpu_map();

- if (!isdigit(*cpu_list)) + /* + * must handle the case of empty cpumap to cover + * TOPOLOGY header for NUMA nodes with no CPU + * ( e.g., because of CPU hotplug) + */ + if (!isdigit(*cpu_list) && *cpu_list != '\0') goto out;

while (isdigit(*cpu_list)) { @@ -181,8 +186,10 @@ struct cpu_map *cpu_map__new(const char *cpu_list)

if (nr_cpus > 0) cpus = cpu_map__trim_new(nr_cpus, tmp_cpus); - else + else if (*cpu_list != '\0') cpus = cpu_map__default_new(); + else + cpus = cpu_map__dummy_new(); invalid: free(tmp_cpus); out:

From: Brian Welty brian.welty@intel.com

[ Upstream commit 904bba211acc2112fdf866e5a2bc6cd9ecd0de1b ]

The work completion length for a receiving a UD send with immediate is short by 4 bytes causing application using this opcode to fail.

The UD receive logic incorrectly subtracts 4 bytes for immediate value. These bytes are already included in header length and are used to calculate header/payload split, so the result is these 4 bytes are subtracted twice, once when the header length subtracted from the overall length and once again in the UD opcode specific path.

Remove the extra subtraction when handling the opcode.

Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Michael J. Ruhl michael.j.ruhl@intel.com Signed-off-by: Brian Welty brian.welty@intel.com Signed-off-by: Mike Marciniszyn mike.marciniszyn@intel.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hfi1/ud.c | 1 - drivers/infiniband/hw/qib/qib_ud.c | 1 - 2 files changed, 2 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/ud.c b/drivers/infiniband/hw/hfi1/ud.c index 70d39fc450a1e..54eb695642649 100644 --- a/drivers/infiniband/hw/hfi1/ud.c +++ b/drivers/infiniband/hw/hfi1/ud.c @@ -980,7 +980,6 @@ void hfi1_ud_rcv(struct hfi1_packet *packet) opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) { wc.ex.imm_data = packet->ohdr->u.ud.imm_data; wc.wc_flags = IB_WC_WITH_IMM; - tlen -= sizeof(u32); } else if (opcode == IB_OPCODE_UD_SEND_ONLY) { wc.ex.imm_data = 0; wc.wc_flags = 0; diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c index f8d029a2390ff..bce2b5cd3c7b7 100644 --- a/drivers/infiniband/hw/qib/qib_ud.c +++ b/drivers/infiniband/hw/qib/qib_ud.c @@ -513,7 +513,6 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct ib_header *hdr, opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) { wc.ex.imm_data = ohdr->u.ud.imm_data; wc.wc_flags = IB_WC_WITH_IMM; - tlen -= sizeof(u32); } else if (opcode == IB_OPCODE_UD_SEND_ONLY) { wc.ex.imm_data = 0; wc.wc_flags = 0;

From: Jerry Snitselaar jsnitsel@redhat.com

[ Upstream commit f1724c0883bb0ce93b8dcb94b53dcca3b75ac9a7 ]

In the error path of map_sg there is an incorrect if condition for breaking out of the loop that searches the scatterlist for mapped pages to unmap. Instead of breaking out of the loop once all the pages that were mapped have been unmapped, it will break out of the loop after it has unmapped 1 page. Fix the condition, so it breaks out of the loop only after all the mapped pages have been unmapped.

Fixes: 80187fd39dcb ("iommu/amd: Optimize map_sg and unmap_sg") Cc: Joerg Roedel joro@8bytes.org Signed-off-by: Jerry Snitselaar jsnitsel@redhat.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 5edc8e6f27114..6459f4f621314 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -2548,7 +2548,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist, bus_addr = address + s->dma_address + (j << PAGE_SHIFT); iommu_unmap_page(domain, bus_addr, PAGE_SIZE);

- if (--mapped_pages) + if (--mapped_pages == 0) goto out_free_iova; } }

From: ZhangXiaoxu zhangxiaoxu5@huawei.com

[ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ]

There is a UBSAN bug report as below: UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21 signed integer overflow: -2147483647 * 1000 cannot be represented in type 'int'

Reproduce program: #include <stdio.h> #include <sys/types.h> #include <sys/socket.h>

#define IPPROTO_IP 0 #define IPPROTO_RAW 255

#define IP_VS_BASE_CTL (64+1024+64) #define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10)

/* The argument to IP_VS_SO_GET_TIMEOUT */ struct ipvs_timeout_t { int tcp_timeout; int tcp_fin_timeout; int udp_timeout; };

int main() { int ret = -1; int sockfd = -1; struct ipvs_timeout_t to;

sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW); if (sockfd == -1) { printf("socket init error\n"); return -1; }

to.tcp_timeout = -2147483647; to.tcp_fin_timeout = -2147483647; to.udp_timeout = -2147483647;

ret = setsockopt(sockfd, IPPROTO_IP, IP_VS_SO_SET_TIMEOUT, (char *)(&to), sizeof(to));

printf("setsockopt return %d\n", ret); return ret; }

Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.

Signed-off-by: ZhangXiaoxu zhangxiaoxu5@huawei.com Acked-by: Simon Horman horms@verge.net.au Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/ipvs/ip_vs_ctl.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 518364f4abccd..55a77314340a5 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2220,6 +2220,18 @@ static int ip_vs_set_timeout(struct netns_ipvs *ipvs, struct ip_vs_timeout_user u->tcp_fin_timeout, u->udp_timeout);

+#ifdef CONFIG_IP_VS_PROTO_TCP + if (u->tcp_timeout < 0 || u->tcp_timeout > (INT_MAX / HZ) || + u->tcp_fin_timeout < 0 || u->tcp_fin_timeout > (INT_MAX / HZ)) { + return -EINVAL; + } +#endif + +#ifdef CONFIG_IP_VS_PROTO_UDP + if (u->udp_timeout < 0 || u->udp_timeout > (INT_MAX / HZ)) + return -EINVAL; +#endif + #ifdef CONFIG_IP_VS_PROTO_TCP if (u->tcp_timeout) { pd = ip_vs_proto_data_get(ipvs, IPPROTO_TCP);

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 303aef8b84272d73999a3207dd05bbe10ed89dc5 ]

The ti_clk_parse_divider_data() function is only called from _get_div_table_from_setup(). That function doesn't look at the return value but instead looks at the "*table" pointer. In this case, if the kcalloc() fails then *table is NULL (which means success). It should instead be an error pointer.

The ti_clk_parse_divider_data() function has two callers. One checks for errors and the other doesn't. I have fixed it so now both handle errors.

Fixes: 4f6be5655dc9 ("clk: ti: divider: add driver internal API for parsing divider data") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Tero Kristo t-kristo@ti.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/ti/divider.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c index ccfb4d9a152ae..079f0beda8b69 100644 --- a/drivers/clk/ti/divider.c +++ b/drivers/clk/ti/divider.c @@ -367,8 +367,10 @@ int ti_clk_parse_divider_data(int *div_table, int num_dividers, int max_div, num_dividers = i;

tmp = kcalloc(valid_div + 1, sizeof(*tmp), GFP_KERNEL); - if (!tmp) + if (!tmp) { + *table = ERR_PTR(-ENOMEM); return -ENOMEM; + }

valid_div = 0; *width = 0; @@ -403,6 +405,7 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup) { struct clk_omap_divider *div; struct clk_omap_reg *reg; + int ret;

if (!setup) return NULL; @@ -422,6 +425,12 @@ struct clk_hw *ti_clk_build_component_div(struct ti_clk_divider *setup) div->flags |= CLK_DIVIDER_POWER_OF_TWO;

div->table = _get_div_table_from_setup(setup, &div->width); + if (IS_ERR(div->table)) { + ret = PTR_ERR(div->table); + kfree(div); + return ERR_PTR(ret); + } +

div->shift = setup->bit_shift; div->latch = -EINVAL;

From: Max Filippov jcmvbkbc@gmail.com

[ Upstream commit 4fe8713b873fc881284722ce4ac47995de7cf62c ]

ccount_timer_shutdown is called from the atomic context in the secondary_start_kernel, resulting in the following BUG:

BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 Preemption disabled at: secondary_start_kernel+0xa1/0x130 Call Trace: ___might_sleep+0xe7/0xfc __might_sleep+0x41/0x44 synchronize_irq+0x24/0x64 disable_irq+0x11/0x14 ccount_timer_shutdown+0x12/0x20 clockevents_switch_state+0x82/0xb4 clockevents_exchange_device+0x54/0x60 tick_check_new_device+0x46/0x70 clockevents_register_device+0x8c/0xc8 clockevents_config_and_register+0x1d/0x2c local_timer_setup+0x75/0x7c secondary_start_kernel+0xb4/0x130 should_never_return+0x32/0x35

Use disable_irq_nosync instead of disable_irq to avoid it. This is safe because the ccount timer IRQ is per-CPU, and once IRQ is masked the ISR will not be called.

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index fd524a54d2ab5..378186b5eb401 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -89,7 +89,7 @@ static int ccount_timer_shutdown(struct clock_event_device *evt) container_of(evt, struct ccount_timer, evt);

if (timer->irq_enabled) { - disable_irq(evt->irq); + disable_irq_nosync(evt->irq); timer->irq_enabled = 0; } return 0;

From: Feras Daoud ferasda@mellanox.com

[ Upstream commit 6ab4aba00f811a5265acc4d3eb1863bb3ca60562 ]

The following BUG was reported by kasan:

BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020

Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib] Call Trace: dump_stack+0x9a/0xeb print_address_description+0xe3/0x2e0 kasan_report+0x18a/0x2e0 ? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] memcpy+0x1f/0x50 ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] ? kvm_clock_read+0x1f/0x30 ? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib] ? __lock_is_held+0xc2/0x170 ? process_one_work+0x880/0x1960 ? process_one_work+0x912/0x1960 process_one_work+0x912/0x1960 ? wq_pool_ids_show+0x310/0x310 ? lock_acquire+0x145/0x440 worker_thread+0x87/0xbb0 ? process_one_work+0x1960/0x1960 kthread+0x314/0x3d0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50

Allocated by task 0: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x168/0x3e0 path_rec_create+0xa2/0x1f0 [ib_ipoib] ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib] dev_hard_start_xmit+0x159/0x8d0 sch_direct_xmit+0x226/0xb40 __dev_queue_xmit+0x1d63/0x2950 neigh_update+0x889/0x1770 arp_process+0xc47/0x21f0 arp_rcv+0x462/0x760 __netif_receive_skb_core+0x1546/0x2da0 netif_receive_skb_internal+0xf2/0x590 napi_gro_receive+0x28e/0x390 ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib] ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib] net_rx_action+0x427/0xe30 __do_softirq+0x28e/0xc42

Freed by task 26680: __kasan_slab_free+0x11d/0x160 kfree+0xf5/0x360 ipoib_flush_paths+0x532/0x9d0 [ib_ipoib] ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib] set_mode+0xc8/0x150 [ib_ipoib] kernfs_fop_write+0x279/0x440 __vfs_write+0xd8/0x5c0 vfs_write+0x15e/0x470 ksys_write+0xb8/0x180 do_syscall_64+0x9b/0x420 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff88034c30bcc8 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff88034c30bcc8, ffff88034c30bec8) The buggy address belongs to the page:

The following race between change mode and xmit flow is the reason for this use-after-free:

Change mode Send packet 1 to GID XX Send packet 2 to GID XX | | | start | | | | | | | | | Create new path for GID XX | | and update neigh path | | | | | | | | | | flush_paths | | | | queue_work(cm.start_task) | | Path for GID XX not found | create new path | | start_task runs with old released path

There is no locking to protect the lifetime of the path through the ipoib_cm_tx struct, so delete it entirely and always use the newly looked up path under the priv->lock.

Fixes: 546481c2816e ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow") Signed-off-by: Feras Daoud ferasda@mellanox.com Reviewed-by: Erez Shitrit erezsh@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/ulp/ipoib/ipoib.h | 1 - drivers/infiniband/ulp/ipoib/ipoib_cm.c | 3 +-- 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 1abe3c62f106d..b22d02c9de90f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -248,7 +248,6 @@ struct ipoib_cm_tx { struct list_head list; struct net_device *dev; struct ipoib_neigh *neigh; - struct ipoib_path *path; struct ipoib_tx_buf *tx_ring; unsigned int tx_head; unsigned int tx_tail; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 0428e01e8f691..aa9dcfc36cd35 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1312,7 +1312,6 @@ struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path

neigh->cm = tx; tx->neigh = neigh; - tx->path = path; tx->dev = dev; list_add(&tx->list, &priv->cm.start_list); set_bit(IPOIB_FLAG_INITIALIZED, &tx->flags); @@ -1371,7 +1370,7 @@ static void ipoib_cm_tx_start(struct work_struct *work) neigh->daddr + QPN_AND_OPTIONS_OFFSET); goto free_neigh; } - memcpy(&pathrec, &p->path->pathrec, sizeof(pathrec)); + memcpy(&pathrec, &path->pathrec, sizeof(pathrec));

spin_unlock_irqrestore(&priv->lock, flags); netif_tx_unlock_bh(dev);

From: Max Filippov jcmvbkbc@gmail.com

[ Upstream commit 32a7726c4f4aadfabdb82440d84f88a5a2c8fe13 ]

- add missing memory barriers to the secondary CPU synchronization spin loops; add comment to the matching memory barrier in the boot_secondary and __cpu_die functions; - use READ_ONCE/WRITE_ONCE to access cpu_start_id/cpu_start_ccount instead of reading/writing them directly; - re-initialize cpu_running every time before starting secondary CPU to flush possible previous CPU startup results.

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/head.S | 5 ++++- arch/xtensa/kernel/smp.c | 34 +++++++++++++++++++++------------- 2 files changed, 25 insertions(+), 14 deletions(-)

diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 9053a5622d2c3..5bd38ea2da384 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -280,12 +280,13 @@ should_never_return:

movi a2, cpu_start_ccount 1: + memw l32i a3, a2, 0 beqi a3, 0, 1b movi a3, 0 s32i a3, a2, 0 - memw 1: + memw l32i a3, a2, 0 beqi a3, 0, 1b wsr a3, ccount @@ -321,11 +322,13 @@ ENTRY(cpu_restart) rsr a0, prid neg a2, a0 movi a3, cpu_start_id + memw s32i a2, a3, 0 #if XCHAL_DCACHE_IS_WRITEBACK dhwbi a3, 0 #endif 1: + memw l32i a2, a3, 0 dhi a3, 0 bne a2, a0, 1b diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c index 932d64689bacb..c9fc2c4f71b3b 100644 --- a/arch/xtensa/kernel/smp.c +++ b/arch/xtensa/kernel/smp.c @@ -195,9 +195,11 @@ static int boot_secondary(unsigned int cpu, struct task_struct *ts) int i;

#ifdef CONFIG_HOTPLUG_CPU - cpu_start_id = cpu; - system_flush_invalidate_dcache_range( - (unsigned long)&cpu_start_id, sizeof(cpu_start_id)); + WRITE_ONCE(cpu_start_id, cpu); + /* Pairs with the third memw in the cpu_restart */ + mb(); + system_flush_invalidate_dcache_range((unsigned long)&cpu_start_id, + sizeof(cpu_start_id)); #endif smp_call_function_single(0, mx_cpu_start, (void *)cpu, 1);

@@ -206,18 +208,21 @@ static int boot_secondary(unsigned int cpu, struct task_struct *ts) ccount = get_ccount(); while (!ccount);

- cpu_start_ccount = ccount; + WRITE_ONCE(cpu_start_ccount, ccount);

- while (time_before(jiffies, timeout)) { + do { + /* + * Pairs with the first two memws in the + * .Lboot_secondary. + */ mb(); - if (!cpu_start_ccount) - break; - } + ccount = READ_ONCE(cpu_start_ccount); + } while (ccount && time_before(jiffies, timeout));

- if (cpu_start_ccount) { + if (ccount) { smp_call_function_single(0, mx_cpu_stop, - (void *)cpu, 1); - cpu_start_ccount = 0; + (void *)cpu, 1); + WRITE_ONCE(cpu_start_ccount, 0); return -EIO; } } @@ -237,6 +242,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) pr_debug("%s: Calling wakeup_secondary(cpu:%d, idle:%p, sp: %08lx)\n", __func__, cpu, idle, start_info.stack);

+ init_completion(&cpu_running); ret = boot_secondary(cpu, idle); if (ret == 0) { wait_for_completion_timeout(&cpu_running, @@ -298,8 +304,10 @@ void __cpu_die(unsigned int cpu) unsigned long timeout = jiffies + msecs_to_jiffies(1000); while (time_before(jiffies, timeout)) { system_invalidate_dcache_range((unsigned long)&cpu_start_id, - sizeof(cpu_start_id)); - if (cpu_start_id == -cpu) { + sizeof(cpu_start_id)); + /* Pairs with the second memw in the cpu_restart */ + mb(); + if (READ_ONCE(cpu_start_id) == -cpu) { platform_cpu_kill(cpu); return; }

From: Max Filippov jcmvbkbc@gmail.com

[ Upstream commit 8b1c42cdd7181200dc1fff39dcb6ac1a3fac2c25 ]

Otherwise it is impossible to enable CPUs after booting with 'maxcpus' parameter.

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c index c9fc2c4f71b3b..80be6449c497e 100644 --- a/arch/xtensa/kernel/smp.c +++ b/arch/xtensa/kernel/smp.c @@ -83,7 +83,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned i;

- for (i = 0; i < max_cpus; ++i) + for_each_possible_cpu(i) set_cpu_present(i, true); }

From: Christoph Hellwig hch@lst.de

[ Upstream commit 4ea899ead2786a30aaa8181fefa81a3df4ad28f6 ]

Introduce a local wait_for_completion variable to avoid an access to the potentially freed dio struture after dropping the last reference count.

Also use the chance to document the completion behavior to make the refcounting clear to the reader of the code.

Fixes: ff6a9292e6 ("iomap: implement direct I/O") Reported-by: Chandan Rajendra chandan@linux.ibm.com Reported-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Christoph Hellwig hch@lst.de Tested-by: Chandan Rajendra chandan@linux.ibm.com Tested-by: Darrick J. Wong darrick.wong@oracle.com Reviewed-by: Dave Chinner dchinner@redhat.com Reviewed-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/iomap.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/fs/iomap.c b/fs/iomap.c index 2e3e64012db7e..fac45206418a2 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -1787,6 +1787,7 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, loff_t pos = iocb->ki_pos, start = pos; loff_t end = iocb->ki_pos + count - 1, ret = 0; unsigned int flags = IOMAP_DIRECT; + bool wait_for_completion = is_sync_kiocb(iocb); struct blk_plug plug; struct iomap_dio *dio;

@@ -1806,7 +1807,6 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, dio->end_io = end_io; dio->error = 0; dio->flags = 0; - dio->wait_for_completion = is_sync_kiocb(iocb);

dio->submit.iter = iter; dio->submit.waiter = current; @@ -1861,7 +1861,7 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, dio_warn_stale_pagecache(iocb->ki_filp); ret = 0;

- if (iov_iter_rw(iter) == WRITE && !dio->wait_for_completion && + if (iov_iter_rw(iter) == WRITE && !wait_for_completion && !inode->i_sb->s_dio_done_wq) { ret = sb_init_dio_done_wq(inode->i_sb); if (ret < 0) @@ -1877,7 +1877,7 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, if (ret <= 0) { /* magic error code to fall back to buffered I/O */ if (ret == -ENOTBLK) { - dio->wait_for_completion = true; + wait_for_completion = true; ret = 0; } break; @@ -1899,8 +1899,24 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, if (dio->flags & IOMAP_DIO_WRITE_FUA) dio->flags &= ~IOMAP_DIO_NEED_SYNC;

+ /* + * We are about to drop our additional submission reference, which + * might be the last reference to the dio. There are three three + * different ways we can progress here: + * + * (a) If this is the last reference we will always complete and free + * the dio ourselves. + * (b) If this is not the last reference, and we serve an asynchronous + * iocb, we must never touch the dio after the decrement, the + * I/O completion handler will complete and free it. + * (c) If this is not the last reference, but we serve a synchronous + * iocb, the I/O completion handler will wake us up on the drop + * of the final reference, and we will complete and free it here + * after we got woken by the I/O completion handler. + */ + dio->wait_for_completion = wait_for_completion; if (!atomic_dec_and_test(&dio->ref)) { - if (!dio->wait_for_completion) + if (!wait_for_completion) return -EIOCBQUEUED;

for (;;) { @@ -1917,9 +1933,7 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, __set_current_state(TASK_RUNNING); }

- ret = iomap_dio_complete(dio); - - return ret; + return iomap_dio_complete(dio);

out_free_dio: kfree(dio);

From: Tomonori Sakita tomonori.sakita@sord.co.jp

[ Upstream commit 6571ebce112a21ec9be68ef2f53b96fcd41fd81b ]

If fill_level was not zero and status was not BUSY, result of "tx_prod - tx_cons - inuse" might be zero. Subtracting 1 unconditionally results invalid negative return value on this case. Make sure not to return an negative value.

Signed-off-by: Tomonori Sakita tomonori.sakita@sord.co.jp Signed-off-by: Atsushi Nemoto atsushi.nemoto@sord.co.jp Reviewed-by: Dalon L Westergreen dalon.westergreen@linux.intel.com Acked-by: Thor Thayer thor.thayer@linux.intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/altera/altera_msgdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/altera/altera_msgdma.c b/drivers/net/ethernet/altera/altera_msgdma.c index 0fb986ba32905..0ae723f753417 100644 --- a/drivers/net/ethernet/altera/altera_msgdma.c +++ b/drivers/net/ethernet/altera/altera_msgdma.c @@ -145,7 +145,8 @@ u32 msgdma_tx_completions(struct altera_tse_private *priv) & 0xffff;

if (inuse) { /* Tx FIFO is not empty */ - ready = priv->tx_prod - priv->tx_cons - inuse - 1; + ready = max_t(int, + priv->tx_prod - priv->tx_cons - inuse - 1, 0); } else { /* Check for buffered last packet */ status = csrrd32(priv->tx_dma_csr, msgdma_csroffs(status));

From: Yonglong Liu liuyonglong@huawei.com

[ Upstream commit ed29ca8b9592562559c64d027fb5eb126e463e2c ]

The hns driver of earlier devices, when autoneg off, restart autoneg will return -EINVAL, so make the hns driver for the latest devices do the same.

Signed-off-by: Yonglong Liu liuyonglong@huawei.com Signed-off-by: Peng Li lipeng321@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c index 774beda040a16..e2710ff48fb0f 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c @@ -1157,16 +1157,18 @@ static int hns_get_regs_len(struct net_device *net_dev) */ static int hns_nic_nway_reset(struct net_device *netdev) { - int ret = 0; struct phy_device *phy = netdev->phydev;

- if (netif_running(netdev)) { - /* if autoneg is disabled, don't restart auto-negotiation */ - if (phy && phy->autoneg == AUTONEG_ENABLE) - ret = genphy_restart_aneg(phy); - } + if (!netif_running(netdev)) + return 0;

- return ret; + if (!phy) + return -EOPNOTSUPP; + + if (phy->autoneg != AUTONEG_ENABLE) + return -EINVAL; + + return genphy_restart_aneg(phy); }

static u32

From: Alexey Khoroshilov khoroshilov@ispras.ru

[ Upstream commit c69c29a1a0a8f68cd87e98ba4a5a79fb8ef2a58c ]

If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov khoroshilov@ispras.ru Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 7b923362ee550..3b174eae77c10 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -1342,8 +1342,10 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv) }

ret = phy_power_on(bsp_priv, true); - if (ret) + if (ret) { + gmac_clk_enable(bsp_priv, false); return ret; + }

pm_runtime_enable(dev); pm_runtime_get_sync(dev);

From: Fernando Fernandez Mancera ffmancera@riseup.net

[ Upstream commit 1a6a0951fc009f6d9fe8ebea2d2417d80d54097b ]

When we check the tcp options of a packet and it doesn't match the current fingerprint, the tcp packet option pointer must be restored to its initial value in order to do the proper tcp options check for the next fingerprint.

Here we can see an example. Assumming the following fingerprint base with two lines:

S10:64:1:60:M*,S,T,N,W6: Linux:3.0::Linux 3.0 S20:64:1:60:M*,S,T,N,W7: Linux:4.19:arch:Linux 4.1

Where TCP options are the last field in the OS signature, all of them overlap except by the last one, ie. 'W6' versus 'W7'.

In case a packet for Linux 4.19 kicks in, the osf finds no matching because the TCP options pointer is updated after checking for the TCP options in the first line.

Therefore, reset pointer back to where it should be.

Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match") Signed-off-by: Fernando Fernandez Mancera ffmancera@riseup.net Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nfnetlink_osf.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/net/netfilter/nfnetlink_osf.c b/net/netfilter/nfnetlink_osf.c index 00db27dfd2ff7..b0bc130947c94 100644 --- a/net/netfilter/nfnetlink_osf.c +++ b/net/netfilter/nfnetlink_osf.c @@ -71,6 +71,7 @@ static bool nf_osf_match_one(const struct sk_buff *skb, int ttl_check, struct nf_osf_hdr_ctx *ctx) { + const __u8 *optpinit = ctx->optp; unsigned int check_WSS = 0; int fmatch = FMATCH_WRONG; int foptsize, optnum; @@ -160,6 +161,9 @@ static bool nf_osf_match_one(const struct sk_buff *skb, } }

+ if (fmatch != FMATCH_OK) + ctx->optp = optpinit; + return fmatch == FMATCH_OK; }

From: Fathi Boudra fathi.boudra@linaro.org

[ Upstream commit 870f193d48c25a97d61a8e6c04e3c29a2c606850 ]

reuseport_bpf_numa fails to build due to undefined reference errors:

aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa /tmp/ccfUuExT.o: In function `send_from_node': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138: undefined reference to `numa_run_on_node' /tmp/ccfUuExT.o: In function `main': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230: undefined reference to `numa_available' /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233: undefined reference to `numa_max_node'

It's GNU Make and linker specific.

The default Makefile rule looks like:

$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)

When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with.

More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead.

LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable.

https://lkml.org/lkml/2010/2/10/362

tools/perf: libraries must come after objects

Link order matters, use LDLIBS instead of LDFLAGS to properly link against libnuma.

Signed-off-by: Fathi Boudra fathi.boudra@linaro.org Signed-off-by: Shuah Khan shuah@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 919aa2ac00af7..9a3764a1084ea 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -18,6 +18,6 @@ TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls KSFT_KHDR_INSTALL := 1 include ../lib.mk

-$(OUTPUT)/reuseport_bpf_numa: LDFLAGS += -lnuma +$(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma $(OUTPUT)/tcp_mmap: LDFLAGS += -lpthread $(OUTPUT)/tcp_inq: LDFLAGS += -lpthread

From: Yao Liu yotta.liu@ucloud.cn

[ Upstream commit 80ff00172407e0aad4b10b94ef0816fc3e7813cb ]

There is a NULL pointer dereference of dev_name in nfs_parse_devname()

The oops looks something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs] ... Call Trace: ? ida_alloc_range+0x34b/0x3d0 ? nfs_clone_super+0x80/0x80 [nfs] ? nfs_free_parsed_mount_data+0x60/0x60 [nfs] mount_fs+0x52/0x170 ? __init_waitqueue_head+0x3b/0x50 vfs_kern_mount+0x6b/0x170 do_mount+0x216/0xdc0 ksys_mount+0x83/0xd0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a NULL check on dev_name

Signed-off-by: Yao Liu yotta.liu@ucloud.cn Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfs/super.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c index ac4b2f005778c..25bd29176053f 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1906,6 +1906,11 @@ static int nfs_parse_devname(const char *dev_name, size_t len; char *end;

+ if (unlikely(!dev_name || !*dev_name)) { + dfprintk(MOUNT, "NFS: device name not specified\n"); + return -EINVAL; + } + /* Is the host name protected with square brakcets? */ if (*dev_name == '[') { end = strchr(++dev_name, ']');

From: Manish Chopra manishc@marvell.com

[ Upstream commit ff9296966e5e00b0d0d00477b2365a178f0f06a3 ]

VF is always configured to drop control frames (with reserved mac addresses) but to work LACP on the VFs, it would require LACP control frames to be forwarded or transmitted successfully.

This patch fixes this in such a way that trusted VFs (marked through ndo_set_vf_trust) would be allowed to pass the control frames such as LACP pdus.

Signed-off-by: Manish Chopra manishc@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 5 +++++ drivers/net/ethernet/qlogic/qed/qed_l2.h | 3 +++ drivers/net/ethernet/qlogic/qed/qed_sriov.c | 10 ++++++++-- 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index b8baa6fcef8e3..e68ca83ae9153 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -748,6 +748,11 @@ int qed_sp_vport_update(struct qed_hwfn *p_hwfn, return rc; }

+ if (p_params->update_ctl_frame_check) { + p_cmn->ctl_frame_mac_check_en = p_params->mac_chk_en; + p_cmn->ctl_frame_ethtype_check_en = p_params->ethtype_chk_en; + } + /* Update mcast bins for VFs, PF doesn't use this functionality */ qed_sp_update_mcast_bin(p_hwfn, p_ramrod, p_params);

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h index 8d80f1095d171..7127d5aaac422 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.h +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h @@ -219,6 +219,9 @@ struct qed_sp_vport_update_params { struct qed_rss_params *rss_params; struct qed_filter_accept_flags accept_flags; struct qed_sge_tpa_params *sge_tpa_params; + u8 update_ctl_frame_check; + u8 mac_chk_en; + u8 ethtype_chk_en; };

int qed_sp_vport_update(struct qed_hwfn *p_hwfn, diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index ca6290fa0f309..71a7af134dd8e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -1969,7 +1969,9 @@ static void qed_iov_vf_mbx_start_vport(struct qed_hwfn *p_hwfn, params.vport_id = vf->vport_id; params.max_buffers_per_cqe = start->max_buffers_per_cqe; params.mtu = vf->mtu; - params.check_mac = true; + + /* Non trusted VFs should enable control frame filtering */ + params.check_mac = !vf->p_vf_info.is_trusted_configured;

rc = qed_sp_eth_vport_start(p_hwfn, &params); if (rc) { @@ -5130,6 +5132,9 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn) params.opaque_fid = vf->opaque_fid; params.vport_id = vf->vport_id;

+ params.update_ctl_frame_check = 1; + params.mac_chk_en = !vf_info->is_trusted_configured; + if (vf_info->rx_accept_mode & mask) { flags->update_rx_mode_config = 1; flags->rx_accept_filter = vf_info->rx_accept_mode; @@ -5147,7 +5152,8 @@ static void qed_iov_handle_trust_change(struct qed_hwfn *hwfn) }

if (flags->update_rx_mode_config || - flags->update_tx_mode_config) + flags->update_tx_mode_config || + params.update_ctl_frame_check) qed_sp_vport_update(hwfn, &params, QED_SPQ_MODE_EBLOCK, NULL); }

From: Manish Chopra manishc@marvell.com

[ Upstream commit 7c81626a3c37e4ac320b8ad785694ba498f24794 ]

Cache number of fragments in the skb locally as in case of linear skb (with zero fragments), tx completion (or freeing of skb) may happen before driver tries to get number of frgaments from the skb which could lead to stale access to an already freed skb.

Signed-off-by: Manish Chopra manishc@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c index 2fa1c050a14b4..b5beca97172a7 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -2426,19 +2426,24 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, { struct qed_ll2_tx_pkt_info pkt; const skb_frag_t *frag; + u8 flags = 0, nr_frags; int rc = -EINVAL, i; dma_addr_t mapping; u16 vlan = 0; - u8 flags = 0;

if (unlikely(skb->ip_summed != CHECKSUM_NONE)) { DP_INFO(cdev, "Cannot transmit a checksummed packet\n"); return -EINVAL; }

- if (1 + skb_shinfo(skb)->nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) { + /* Cache number of fragments from SKB since SKB may be freed by + * the completion routine after calling qed_ll2_prepare_tx_packet() + */ + nr_frags = skb_shinfo(skb)->nr_frags; + + if (1 + nr_frags > CORE_LL2_TX_MAX_BDS_PER_PACKET) { DP_ERR(cdev, "Cannot transmit a packet with %d fragments\n", - 1 + skb_shinfo(skb)->nr_frags); + 1 + nr_frags); return -EINVAL; }

@@ -2460,7 +2465,7 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, }

memset(&pkt, 0, sizeof(pkt)); - pkt.num_of_bds = 1 + skb_shinfo(skb)->nr_frags; + pkt.num_of_bds = 1 + nr_frags; pkt.vlan = vlan; pkt.bd_flags = flags; pkt.tx_dest = QED_LL2_TX_DEST_NW; @@ -2471,12 +2476,17 @@ static int qed_ll2_start_xmit(struct qed_dev *cdev, struct sk_buff *skb, test_bit(QED_LL2_XMIT_FLAGS_FIP_DISCOVERY, &xmit_flags)) pkt.remove_stag = true;

+ /* qed_ll2_prepare_tx_packet() may actually send the packet if + * there are no fragments in the skb and subsequently the completion + * routine may run and free the SKB, so no dereferencing the SKB + * beyond this point unless skb has any fragments. + */ rc = qed_ll2_prepare_tx_packet(&cdev->hwfns[0], cdev->ll2->handle, &pkt, 1); if (rc) goto err;

- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + for (i = 0; i < nr_frags; i++) { frag = &skb_shinfo(skb)->frags[i];

mapping = skb_frag_dma_map(&cdev->pdev->dev, frag, 0,

From: Ming Lu ming.lu@citrix.com

[ Upstream commit 5d8fc4a9f0eec20b6c07895022a6bea3fb6dfb38 ]

The issue to be fixed in this commit is when libfc found it received a invalid FLOGI response from FC switch, it would return without freeing the fc frame, which is just the skb data. This would cause memory leak if FC switch keeps sending invalid FLOGI responses.

This fix is just to make it execute `fc_frame_free(fp)` before returning from function `fc_lport_flogi_resp`.

Signed-off-by: Ming Lu ming.lu@citrix.com Reviewed-by: Hannes Reinecke hare@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libfc/fc_lport.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index be83590ed9559..ff943f477d6f0 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1726,14 +1726,14 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, fc_frame_payload_op(fp) != ELS_LS_ACC) { FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n"); fc_lport_error(lport, fp); - goto err; + goto out; }

flp = fc_frame_payload_get(fp, sizeof(*flp)); if (!flp) { FC_LPORT_DBG(lport, "FLOGI bad response\n"); fc_lport_error(lport, fp); - goto err; + goto out; }

mfs = ntohs(flp->fl_csp.sp_bb_data) & @@ -1743,7 +1743,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, " "lport->mfs:%hu\n", mfs, lport->mfs); fc_lport_error(lport, fp); - goto err; + goto out; }

if (mfs <= lport->mfs) {

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit b2d3492fc591b1fb46b81d79ca1fc44cac6ae0ae ]

There are two issues here. First if cmgr->hba is not set early enough then it leads to a NULL dereference. Second if we don't completely initialize cmgr->io_bdt_pool[] then we end up dereferencing uninitialized pointers.

Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/bnx2fc/bnx2fc_io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c index 350257c13a5ba..bc9f2a2365f4d 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_io.c +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c @@ -240,6 +240,7 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba) return NULL; }

+ cmgr->hba = hba; cmgr->free_list = kcalloc(arr_sz, sizeof(*cmgr->free_list), GFP_KERNEL); if (!cmgr->free_list) { @@ -256,7 +257,6 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba) goto mem_err; }

- cmgr->hba = hba; cmgr->cmds = (struct bnx2fc_cmd **)(cmgr + 1);

for (i = 0; i < arr_sz; i++) { @@ -295,7 +295,7 @@ struct bnx2fc_cmd_mgr *bnx2fc_cmd_mgr_alloc(struct bnx2fc_hba *hba)

/* Allocate pool of io_bdts - one for each bnx2fc_cmd */ mem_size = num_ios * sizeof(struct io_bdt *); - cmgr->io_bdt_pool = kmalloc(mem_size, GFP_KERNEL); + cmgr->io_bdt_pool = kzalloc(mem_size, GFP_KERNEL); if (!cmgr->io_bdt_pool) { printk(KERN_ERR PFX "failed to alloc io_bdt_pool\n"); goto mem_err;

From: Sinan Kaya okaya@kernel.org

[ Upstream commit d58bf90a32a33becec78c3034e781735049fcd25 ]

Add BACKLIGHT_LCD_SUPPORT for ACPI_CMPC to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.

ACPI_CMPC selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT.

Copy BACKLIGHT_LCD_SUPPORT dependency into ACPI_CMPC to fix

WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - ACPI_CMPC [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && (RFKILL [=n] || RFKILL [=n]=n)

Signed-off-by: Sinan Kaya okaya@kernel.org Acked-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/Kconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 0c1aa6c314f50..96afca4648d54 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -856,6 +856,7 @@ config TOSHIBA_WMI config ACPI_CMPC tristate "CMPC Laptop Extras" depends on ACPI && INPUT + depends on BACKLIGHT_LCD_SUPPORT depends on RFKILL || RFKILL=n select BACKLIGHT_CLASS_DEVICE help

From: Harini Katakam harini.katakam@xilinx.com

[ Upstream commit e501070e4db0b67a4c17a5557d1e9d098f3db310 ]

The interrupt handler contains a workaround for RX hang applicable to Zynq and AT91RM9200 only. Subsequent versions do not need this workaround. This workaround unnecessarily resets RX whenever RX used bit read is observed, which can be often under heavy traffic. There is no other action performed on RX UBR interrupt. Hence introduce a CAPS mask; enable this interrupt and workaround only on affected versions.

Signed-off-by: Harini Katakam harini.katakam@xilinx.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cadence/macb.h | 3 +++ drivers/net/ethernet/cadence/macb_main.c | 28 ++++++++++++++---------- 2 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 3d45f4c92cf6e..9bbaad9f3d632 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -643,6 +643,7 @@ #define MACB_CAPS_JUMBO 0x00000020 #define MACB_CAPS_GEM_HAS_PTP 0x00000040 #define MACB_CAPS_BD_RD_PREFETCH 0x00000080 +#define MACB_CAPS_NEEDS_RSTONUBR 0x00000100 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 #define MACB_CAPS_SG_DISABLED 0x40000000 @@ -1214,6 +1215,8 @@ struct macb {

int rx_bd_rd_prefetch; int tx_bd_rd_prefetch; + + u32 rx_intr_mask; };

#ifdef CONFIG_MACB_USE_HWSTAMP diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 8f4b2f9a8e079..8abea1c3844fc 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -56,8 +56,7 @@ /* level of occupied TX descriptors under which we wake up TX process */ #define MACB_TX_WAKEUP_THRESH(bp) (3 * (bp)->tx_ring_size / 4)

-#define MACB_RX_INT_FLAGS (MACB_BIT(RCOMP) | MACB_BIT(RXUBR) \ - | MACB_BIT(ISR_ROVR)) +#define MACB_RX_INT_FLAGS (MACB_BIT(RCOMP) | MACB_BIT(ISR_ROVR)) #define MACB_TX_ERR_FLAGS (MACB_BIT(ISR_TUND) \ | MACB_BIT(ISR_RLE) \ | MACB_BIT(TXERR)) @@ -1271,7 +1270,7 @@ static int macb_poll(struct napi_struct *napi, int budget) queue_writel(queue, ISR, MACB_BIT(RCOMP)); napi_reschedule(napi); } else { - queue_writel(queue, IER, MACB_RX_INT_FLAGS); + queue_writel(queue, IER, bp->rx_intr_mask); } }

@@ -1289,7 +1288,7 @@ static void macb_hresp_error_task(unsigned long data) u32 ctrl;

for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) { - queue_writel(queue, IDR, MACB_RX_INT_FLAGS | + queue_writel(queue, IDR, bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP)); } @@ -1319,7 +1318,7 @@ static void macb_hresp_error_task(unsigned long data)

/* Enable interrupts */ queue_writel(queue, IER, - MACB_RX_INT_FLAGS | + bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP)); } @@ -1373,14 +1372,14 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) (unsigned int)(queue - bp->queues), (unsigned long)status);

- if (status & MACB_RX_INT_FLAGS) { + if (status & bp->rx_intr_mask) { /* There's no point taking any more interrupts * until we have processed the buffers. The * scheduling call may fail if the poll routine * is already scheduled, so disable interrupts * now. */ - queue_writel(queue, IDR, MACB_RX_INT_FLAGS); + queue_writel(queue, IDR, bp->rx_intr_mask); if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) queue_writel(queue, ISR, MACB_BIT(RCOMP));

@@ -1413,8 +1412,9 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) /* There is a hardware issue under heavy load where DMA can * stop, this causes endless "used buffer descriptor read" * interrupts but it can be cleared by re-enabling RX. See - * the at91 manual, section 41.3.1 or the Zynq manual - * section 16.7.4 for details. + * the at91rm9200 manual, section 41.3.1 or the Zynq manual + * section 16.7.4 for details. RXUBR is only enabled for + * these two versions. */ if (status & MACB_BIT(RXUBR)) { ctrl = macb_readl(bp, NCR); @@ -2264,7 +2264,7 @@ static void macb_init_hw(struct macb *bp)

/* Enable interrupts */ queue_writel(queue, IER, - MACB_RX_INT_FLAGS | + bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP)); } @@ -3912,6 +3912,7 @@ static const struct macb_config sama5d4_config = { };

static const struct macb_config emac_config = { + .caps = MACB_CAPS_NEEDS_RSTONUBR, .clk_init = at91ether_clk_init, .init = at91ether_init, }; @@ -3933,7 +3934,8 @@ static const struct macb_config zynqmp_config = { };

static const struct macb_config zynq_config = { - .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF, + .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF | + MACB_CAPS_NEEDS_RSTONUBR, .dma_burst_length = 16, .clk_init = macb_clk_init, .init = macb_init, @@ -4088,6 +4090,10 @@ static int macb_probe(struct platform_device *pdev) macb_dma_desc_get_size(bp); }

+ bp->rx_intr_mask = MACB_RX_INT_FLAGS; + if (bp->caps & MACB_CAPS_NEEDS_RSTONUBR) + bp->rx_intr_mask |= MACB_BIT(RXUBR); + mac = of_get_mac_address(np); if (mac) { ether_addr_copy(bp->dev->dev_addr, mac);

From: Ronnie Sahlberg lsahlber@redhat.com

[ Upstream commit 58d15ed1203f4d858c339ea4d7dafa94bd2a56d3 ]

The size of the fixed part of the create response is 88 bytes not 56.

Signed-off-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Reviewed-by: Pavel Shilovsky pshilov@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/smb2pdu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index 8fb7887f2b3d9..437257d1116f0 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -84,8 +84,8 @@

#define NUMBER_OF_SMB2_COMMANDS 0x0013

-/* 4 len + 52 transform hdr + 64 hdr + 56 create rsp */ -#define MAX_SMB2_HDR_SIZE 0x00b0 +/* 52 transform hdr + 64 hdr + 88 create rsp */ +#define MAX_SMB2_HDR_SIZE 204

#define SMB2_PROTO_NUMBER cpu_to_le32(0x424d53fe) #define SMB2_TRANSFORM_PROTO_NUM cpu_to_le32(0x424d53fd)

From: Thomas Lendacky Thomas.Lendacky@amd.com

[ Upstream commit 912139cfbfa6a2bc1da052314d2c29338dae1f6a ]

The load_microcode_amd() function searches for microcode patches and attempts to apply a microcode patch if it is of different level than the currently installed level.

While the processor won't actually load a level that is less than what is already installed, the logic wrongly returns UCODE_NEW thus signaling to its caller reload_store() that a late loading should be attempted.

If the file-system contains an older microcode revision than what is currently running, such a late microcode reload can result in these misleading messages:

x86/CPU: CPU features have changed after loading microcode, but might not take effect. x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.

These messages were issued on a system where SME/SEV are not enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot, early_detect_mem_encrypt() is called and cleared the SME and SEV features in this case.

However, after the wrong late load attempt, get_cpu_cap() is called and reloads the SME and SEV feature bits, resulting in the messages.

Update the microcode level check to not attempt microcode loading if the current level is greater than(!) and not only equal to the current patch level.

[ bp: massage commit message. ]

Fixes: 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present") Signed-off-by: Tom Lendacky thomas.lendacky@amd.com Signed-off-by: Borislav Petkov bp@suse.de Cc: "H. Peter Anvin" hpa@zytor.com Cc: Ingo Molnar mingo@redhat.com Cc: Thomas Gleixner tglx@linutronix.de Cc: x86-ml x86@kernel.org Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlenda... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/cpu/microcode/amd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c index 07b5fc00b1880..a4e7e100ed26b 100644 --- a/arch/x86/kernel/cpu/microcode/amd.c +++ b/arch/x86/kernel/cpu/microcode/amd.c @@ -707,7 +707,7 @@ load_microcode_amd(bool save, u8 family, const u8 *data, size_t size) if (!p) { return ret; } else { - if (boot_cpu_data.microcode == p->patch_id) + if (boot_cpu_data.microcode >= p->patch_id) return ret;

ret = UCODE_NEW;

From: John Johansen john.johansen@canonical.com

[ Upstream commit d6d478aee003e19ef90321176552a8ad2929a47f ]

aa_label_merge() can return NULL for memory allocations failures make sure to handle and set the correct error in this case.

Reported-by: Peng Hao peng.hao2@zte.com.cn Signed-off-by: John Johansen john.johansen@canonical.com Signed-off-by: Sasha Levin sashal@kernel.org --- security/apparmor/domain.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c index 08c88de0ffdad..11975ec8d5665 100644 --- a/security/apparmor/domain.c +++ b/security/apparmor/domain.c @@ -1444,7 +1444,10 @@ int aa_change_profile(const char *fqname, int flags) new = aa_label_merge(label, target, GFP_KERNEL); if (IS_ERR_OR_NULL(new)) { info = "failed to build target label"; - error = PTR_ERR(new); + if (!new) + error = -ENOMEM; + else + error = PTR_ERR(new); new = NULL; perms.allow = 0; goto audit;

From: Alexey Dobriyan adobriyan@gmail.com

[ Upstream commit 1fde6f21d90f8ba5da3cb9c54ca991ed72696c43 ]

/proc entries under /proc/net/* can't be cached into dcache because setns(2) can change current net namespace.

[akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: avoid vim miscolorization] [adobriyan@gmail.com: write test, add dummy ->d_revalidate hook: necessary if /proc/net/* is pinned at setns time] Link: http://lkml.kernel.org/r/20190108192350.GA12034@avx2 Link: http://lkml.kernel.org/r/20190107162336.GA9239@avx2 Fixes: 1da4d377f943fe4194ffb9fb9c26cc58fad4dd24 ("proc: revalidate misc dentries") Signed-off-by: Alexey Dobriyan adobriyan@gmail.com Reported-by: Mateusz Stępień mateusz.stepien@netrounds.com Reported-by: Ahmad Fatoum a.fatoum@pengutronix.de Cc: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/proc/generic.c | 4 +- fs/proc/internal.h | 1 + fs/proc/proc_net.c | 20 +++ tools/testing/selftests/proc/.gitignore | 1 + tools/testing/selftests/proc/Makefile | 1 + tools/testing/selftests/proc/setns-dcache.c | 129 ++++++++++++++++++++ 6 files changed, 155 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/proc/setns-dcache.c

diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 8ae109429a883..e39bac94dead0 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -256,7 +256,7 @@ struct dentry *proc_lookup_de(struct inode *dir, struct dentry *dentry, inode = proc_get_inode(dir->i_sb, de); if (!inode) return ERR_PTR(-ENOMEM); - d_set_d_op(dentry, &proc_misc_dentry_ops); + d_set_d_op(dentry, de->proc_dops); return d_splice_alias(inode, dentry); } read_unlock(&proc_subdir_lock); @@ -429,6 +429,8 @@ static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent, INIT_LIST_HEAD(&ent->pde_openers); proc_set_user(ent, (*parent)->uid, (*parent)->gid);

+ ent->proc_dops = &proc_misc_dentry_ops; + out: return ent; } diff --git a/fs/proc/internal.h b/fs/proc/internal.h index 5185d7f6a51ee..95b14196f2842 100644 --- a/fs/proc/internal.h +++ b/fs/proc/internal.h @@ -44,6 +44,7 @@ struct proc_dir_entry { struct completion *pde_unload_completion; const struct inode_operations *proc_iops; const struct file_operations *proc_fops; + const struct dentry_operations *proc_dops; union { const struct seq_operations *seq_ops; int (*single_show)(struct seq_file *, void *); diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c index d5e0fcb3439e9..a7b12435519e0 100644 --- a/fs/proc/proc_net.c +++ b/fs/proc/proc_net.c @@ -38,6 +38,22 @@ static struct net *get_proc_net(const struct inode *inode) return maybe_get_net(PDE_NET(PDE(inode))); }

+static int proc_net_d_revalidate(struct dentry *dentry, unsigned int flags) +{ + return 0; +} + +static const struct dentry_operations proc_net_dentry_ops = { + .d_revalidate = proc_net_d_revalidate, + .d_delete = always_delete_dentry, +}; + +static void pde_force_lookup(struct proc_dir_entry *pde) +{ + /* /proc/net/ entries can be changed under us by setns(CLONE_NEWNET) */ + pde->proc_dops = &proc_net_dentry_ops; +} + static int seq_open_net(struct inode *inode, struct file *file) { unsigned int state_size = PDE(inode)->state_size; @@ -90,6 +106,7 @@ struct proc_dir_entry *proc_create_net_data(const char *name, umode_t mode, p = proc_create_reg(name, mode, &parent, data); if (!p) return NULL; + pde_force_lookup(p); p->proc_fops = &proc_net_seq_fops; p->seq_ops = ops; p->state_size = state_size; @@ -133,6 +150,7 @@ struct proc_dir_entry *proc_create_net_data_write(const char *name, umode_t mode p = proc_create_reg(name, mode, &parent, data); if (!p) return NULL; + pde_force_lookup(p); p->proc_fops = &proc_net_seq_fops; p->seq_ops = ops; p->state_size = state_size; @@ -181,6 +199,7 @@ struct proc_dir_entry *proc_create_net_single(const char *name, umode_t mode, p = proc_create_reg(name, mode, &parent, data); if (!p) return NULL; + pde_force_lookup(p); p->proc_fops = &proc_net_single_fops; p->single_show = show; return proc_register(parent, p); @@ -223,6 +242,7 @@ struct proc_dir_entry *proc_create_net_single_write(const char *name, umode_t mo p = proc_create_reg(name, mode, &parent, data); if (!p) return NULL; + pde_force_lookup(p); p->proc_fops = &proc_net_single_fops; p->single_show = show; p->write = write; diff --git a/tools/testing/selftests/proc/.gitignore b/tools/testing/selftests/proc/.gitignore index 82121a81681f7..29bac5ef9a93d 100644 --- a/tools/testing/selftests/proc/.gitignore +++ b/tools/testing/selftests/proc/.gitignore @@ -10,4 +10,5 @@ /proc-uptime-002 /read /self +/setns-dcache /thread-self diff --git a/tools/testing/selftests/proc/Makefile b/tools/testing/selftests/proc/Makefile index 1c12c34cf85d8..434d033ee0677 100644 --- a/tools/testing/selftests/proc/Makefile +++ b/tools/testing/selftests/proc/Makefile @@ -14,6 +14,7 @@ TEST_GEN_PROGS += proc-uptime-001 TEST_GEN_PROGS += proc-uptime-002 TEST_GEN_PROGS += read TEST_GEN_PROGS += self +TEST_GEN_PROGS += setns-dcache TEST_GEN_PROGS += thread-self

include ../lib.mk diff --git a/tools/testing/selftests/proc/setns-dcache.c b/tools/testing/selftests/proc/setns-dcache.c new file mode 100644 index 0000000000000..60ab197a73fc9 --- /dev/null +++ b/tools/testing/selftests/proc/setns-dcache.c @@ -0,0 +1,129 @@ +/* + * Copyright © 2019 Alexey Dobriyan adobriyan@gmail.com + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +/* + * Test that setns(CLONE_NEWNET) points to new /proc/net content even + * if old one is in dcache. + * + * FIXME /proc/net/unix is under CONFIG_UNIX which can be disabled. + */ +#undef NDEBUG +#include <assert.h> +#include <errno.h> +#include <sched.h> +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <sys/socket.h> + +static pid_t pid = -1; + +static void f(void) +{ + if (pid > 0) { + kill(pid, SIGTERM); + } +} + +int main(void) +{ + int fd[2]; + char _ = 0; + int nsfd; + + atexit(f); + + /* Check for priviledges and syscall availability straight away. */ + if (unshare(CLONE_NEWNET) == -1) { + if (errno == ENOSYS || errno == EPERM) { + return 4; + } + return 1; + } + /* Distinguisher between two otherwise empty net namespaces. */ + if (socket(AF_UNIX, SOCK_STREAM, 0) == -1) { + return 1; + } + + if (pipe(fd) == -1) { + return 1; + } + + pid = fork(); + if (pid == -1) { + return 1; + } + + if (pid == 0) { + if (unshare(CLONE_NEWNET) == -1) { + return 1; + } + + if (write(fd[1], &_, 1) != 1) { + return 1; + } + + pause(); + + return 0; + } + + if (read(fd[0], &_, 1) != 1) { + return 1; + } + + { + char buf[64]; + snprintf(buf, sizeof(buf), "/proc/%u/ns/net", pid); + nsfd = open(buf, O_RDONLY); + if (nsfd == -1) { + return 1; + } + } + + /* Reliably pin dentry into dcache. */ + (void)open("/proc/net/unix", O_RDONLY); + + if (setns(nsfd, CLONE_NEWNET) == -1) { + return 1; + } + + kill(pid, SIGTERM); + pid = 0; + + { + char buf[4096]; + ssize_t rv; + int fd; + + fd = open("/proc/net/unix", O_RDONLY); + if (fd == -1) { + return 1; + } + +#define S "Num RefCount Protocol Flags Type St Inode Path\n" + rv = read(fd, buf, sizeof(buf)); + + assert(rv == strlen(S)); + assert(memcmp(buf, S, strlen(S)) == 0); + } + + return 0; +}

From: Michal Hocko mhocko@suse.com

[ Upstream commit efad4e475c312456edb3c789d0996d12ed744c13 ]

Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2.

Mikhail Zaslonko has posted fixes for the two bugs quite some time ago [1]. I have pushed back on those fixes because I believed that it is much better to plug the problem at the initialization time rather than play whack-a-mole all over the hotplug code and find all the places which expect the full memory section to be initialized.

We have ended up with commit 2830bf6f05fb ("mm, memory_hotplug: initialize struct pages for the full memory section") merged and cause a regression [2][3]. The reason is that there might be memory layouts when two NUMA nodes share the same memory section so the merged fix is simply incorrect.

In order to plug this hole we really have to be zone range aware in those handlers. I have split up the original patch into two. One is unchanged (patch 2) and I took a different approach for `removable' crash.

[1] http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com [2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948 [3] http://lkml.kernel.org/r/20190125163938.GA20411@dhcp22.suse.cz

This patch (of 2):

Mikhail has reported the following VM_BUG_ON triggered when reading sysfs removable state of a memory block:

page:000003d08300c000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: is_mem_section_removable+0xb4/0x190 show_mem_removable+0x9a/0xd8 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: is_mem_section_removable+0xb4/0x190 Kernel panic - not syncing: Fatal exception: panic_on_oops

The reason is that the memory block spans the zone boundary and we are stumbling over an unitialized struct page. Fix this by enforcing zone range in is_mem_section_removable so that we never run away from a zone.

Link: http://lkml.kernel.org/r/20190128144506.15603-2-mhocko@kernel.org Signed-off-by: Michal Hocko mhocko@suse.com Reported-by: Mikhail Zaslonko zaslonko@linux.ibm.com Debugged-by: Mikhail Zaslonko zaslonko@linux.ibm.com Tested-by: Gerald Schaefer gerald.schaefer@de.ibm.com Tested-by: Mikhail Gavrilov mikhail.v.gavrilov@gmail.com Reviewed-by: Oscar Salvador osalvador@suse.de Cc: Pavel Tatashin pasha.tatashin@soleen.com Cc: Heiko Carstens heiko.carstens@de.ibm.com Cc: Martin Schwidefsky schwidefsky@de.ibm.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/memory_hotplug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index c6119ad3561ea..34cde04f346d9 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1258,7 +1258,8 @@ static bool is_pageblock_removable_nolock(struct page *page) bool is_mem_section_removable(unsigned long start_pfn, unsigned long nr_pages) { struct page *page = pfn_to_page(start_pfn); - struct page *end_page = page + nr_pages; + unsigned long end_pfn = min(start_pfn + nr_pages, zone_end_pfn(page_zone(page))); + struct page *end_page = pfn_to_page(end_pfn);

/* Check the starting page of each pageblock within the range */ for (; page < end_page; page = next_active_pageblock(page)) {

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit db7ddeab3ce5d64c9696e70d61f45ea9909cd196 ]

There is a copy and paste bug so we set "config->test_driver" to NULL twice instead of setting "config->test_fs". Smatch complains that it leads to a double free:

lib/test_kmod.c:840 __kmod_config_init() warn: 'config->test_fs' double freed

Link: http://lkml.kernel.org/r/20190121140011.GA14283@kadam Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Luis Chamberlain mcgrof@kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/test_kmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/test_kmod.c b/lib/test_kmod.c index d82d022111e0e..9cf77628fc913 100644 --- a/lib/test_kmod.c +++ b/lib/test_kmod.c @@ -632,7 +632,7 @@ static void __kmod_config_free(struct test_config *config) config->test_driver = NULL;

kfree_const(config->test_fs); - config->test_driver = NULL; + config->test_fs = NULL; }

static void kmod_config_free(struct kmod_test_device *test_dev)

From: Pan Bian bianpan2016@163.com

[ Upstream commit 63ce5f552beb9bdb41546b3a26c4374758b21815 ]

autofs_expire_run() calls dput(dentry) to drop the reference count of dentry. However, dentry is read via autofs_dentry_ino(dentry) after that. This may result in a use-free-bug. The patch drops the reference count of dentry only when it is never used.

Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto... Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: Ian Kent raven@themaw.net Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/autofs/expire.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/autofs/expire.c b/fs/autofs/expire.c index d441244b79df9..28d9c2b1b3bb3 100644 --- a/fs/autofs/expire.c +++ b/fs/autofs/expire.c @@ -596,7 +596,6 @@ int autofs_expire_run(struct super_block *sb, pkt.len = dentry->d_name.len; memcpy(pkt.name, dentry->d_name.name, pkt.len); pkt.name[pkt.len] = '\0'; - dput(dentry);

if (copy_to_user(pkt_p, &pkt, sizeof(struct autofs_packet_expire))) ret = -EFAULT; @@ -609,6 +608,8 @@ int autofs_expire_run(struct super_block *sb, complete_all(&ino->expire_complete); spin_unlock(&sbi->fs_lock);

+ dput(dentry); + return ret; }