From: Lu Hongfei luhongfei@vivo.com
[ Upstream commit 35ca8ce495366909b4c2e701d1356570dd40c4e2 ]
Use put_device to release the object get through of_find_device_by_node, avoiding resource leaks.
Signed-off-by: Lu Hongfei luhongfei@vivo.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c b/drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c index 7bc05f42a23c1..9a3f46c1f6ba3 100644 --- a/drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c +++ b/drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c @@ -775,11 +775,13 @@ static int mdp_get_subsys_id(struct device *dev, struct device_node *node, ret = cmdq_dev_get_client_reg(&comp_pdev->dev, &cmdq_reg, index); if (ret != 0) { dev_err(&comp_pdev->dev, "cmdq_dev_get_subsys fail!\n"); + put_device(&comp_pdev->dev); return -EINVAL; }
comp->subsys_id = cmdq_reg.subsys; dev_dbg(&comp_pdev->dev, "subsys id=%d\n", cmdq_reg.subsys); + put_device(&comp_pdev->dev);
return 0; }
From: Zhang Shurong zhang_shurong@foxmail.com
[ Upstream commit 7bf744f2de0a848fb1d717f5831b03db96feae89 ]
In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong zhang_shurong@foxmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb-v2/af9035.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 1e9c8d01523be..33a2aa8907e65 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -322,6 +322,8 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, ret = -EOPNOTSUPP; } else if ((msg[0].addr == state->af9033_i2c_addr[0]) || (msg[0].addr == state->af9033_i2c_addr[1])) { + if (msg[0].len < 3 || msg[1].len < 1) + return -EOPNOTSUPP; /* demod access via firmware interface */ u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | msg[0].buf[2]; @@ -381,6 +383,8 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, ret = -EOPNOTSUPP; } else if ((msg[0].addr == state->af9033_i2c_addr[0]) || (msg[0].addr == state->af9033_i2c_addr[1])) { + if (msg[0].len < 3) + return -EOPNOTSUPP; /* demod access via firmware interface */ u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | msg[0].buf[2]; @@ -388,10 +392,7 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, if (msg[0].addr == state->af9033_i2c_addr[1]) reg |= 0x100000;
- ret = (msg[0].len >= 3) ? af9035_wr_regs(d, reg, - &msg[0].buf[3], - msg[0].len - 3) - : -EOPNOTSUPP; + ret = af9035_wr_regs(d, reg, &msg[0].buf[3], msg[0].len - 3); } else { /* I2C write */ u8 buf[MAX_XFER_SIZE];
From: Zhang Shurong zhang_shurong@foxmail.com
[ Upstream commit 5ae544d94abc8ff77b1b9bf8774def3fa5689b5b ]
In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach dw2102_i2c_transfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 950e252cb469 ("[media] dw2102: limit messages to buffer size")
Signed-off-by: Zhang Shurong zhang_shurong@foxmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb/dw2102.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 8747960e61461..356fc728d59a8 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -128,6 +128,10 @@ static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
switch (num) { case 2: + if (msg[0].len < 1) { + num = -EOPNOTSUPP; + break; + } /* read stv0299 register */ value = msg[0].buf[0];/* register */ for (i = 0; i < msg[1].len; i++) { @@ -139,6 +143,10 @@ static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], case 1: switch (msg[0].addr) { case 0x68: + if (msg[0].len < 2) { + num = -EOPNOTSUPP; + break; + } /* write to stv0299 register */ buf6[0] = 0x2a; buf6[1] = msg[0].buf[0]; @@ -148,6 +156,10 @@ static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], break; case 0x60: if (msg[0].flags == 0) { + if (msg[0].len < 4) { + num = -EOPNOTSUPP; + break; + } /* write to tuner pll */ buf6[0] = 0x2c; buf6[1] = 5; @@ -159,6 +171,10 @@ static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], dw210x_op_rw(d->udev, 0xb2, 0, 0, buf6, 7, DW210X_WRITE_MSG); } else { + if (msg[0].len < 1) { + num = -EOPNOTSUPP; + break; + } /* read from tuner */ dw210x_op_rw(d->udev, 0xb5, 0, 0, buf6, 1, DW210X_READ_MSG); @@ -166,12 +182,20 @@ static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], } break; case (DW2102_RC_QUERY): + if (msg[0].len < 2) { + num = -EOPNOTSUPP; + break; + } dw210x_op_rw(d->udev, 0xb8, 0, 0, buf6, 2, DW210X_READ_MSG); msg[0].buf[0] = buf6[0]; msg[0].buf[1] = buf6[1]; break; case (DW2102_VOLTAGE_CTRL): + if (msg[0].len < 1) { + num = -EOPNOTSUPP; + break; + } buf6[0] = 0x30; buf6[1] = msg[0].buf[0]; dw210x_op_rw(d->udev, 0xb2, 0, 0,
From: Zhang Shurong zhang_shurong@foxmail.com
[ Upstream commit f4ee84f27625ce1fdf41e8483fa0561a1b837d10 ]
In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong zhang_shurong@foxmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb/af9005.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index 0827bf3d4e8c7..13604e6acdb83 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -422,6 +422,10 @@ static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], if (ret == 0) ret = 2; } else { + if (msg[0].len < 2) { + ret = -EOPNOTSUPP; + goto unlock; + } /* write one or more registers */ reg = msg[0].buf[0]; addr = msg[0].addr; @@ -431,6 +435,7 @@ static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], ret = 1; }
+unlock: mutex_unlock(&d->i2c_mutex); return ret; }
From: Zhang Shurong zhang_shurong@foxmail.com
[ Upstream commit c30411266fd67ea3c02a05c157231654d5a3bdc9 ]
In anysee_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach anysee_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong zhang_shurong@foxmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl [hverkuil: add spaces around +] Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb-v2/anysee.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb-v2/anysee.c b/drivers/media/usb/dvb-usb-v2/anysee.c index aa45b5d263f6b..a1235d0cce92f 100644 --- a/drivers/media/usb/dvb-usb-v2/anysee.c +++ b/drivers/media/usb/dvb-usb-v2/anysee.c @@ -202,7 +202,7 @@ static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
while (i < num) { if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { - if (msg[i].len > 2 || msg[i+1].len > 60) { + if (msg[i].len != 2 || msg[i + 1].len > 60) { ret = -EOPNOTSUPP; break; }
From: Zhang Shurong zhang_shurong@foxmail.com
[ Upstream commit 1047f9343011f2cedc73c64829686206a7e9fc3f ]
In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach az6007_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong zhang_shurong@foxmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb-v2/az6007.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/media/usb/dvb-usb-v2/az6007.c b/drivers/media/usb/dvb-usb-v2/az6007.c index 7524c90f5da61..6cbfe75791c21 100644 --- a/drivers/media/usb/dvb-usb-v2/az6007.c +++ b/drivers/media/usb/dvb-usb-v2/az6007.c @@ -788,6 +788,10 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], if (az6007_xfer_debug) printk(KERN_DEBUG "az6007: I2C W addr=0x%x len=%d\n", addr, msgs[i].len); + if (msgs[i].len < 1) { + ret = -EIO; + goto err; + } req = AZ6007_I2C_WR; index = msgs[i].buf[0]; value = addr | (1 << 8); @@ -802,6 +806,10 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], if (az6007_xfer_debug) printk(KERN_DEBUG "az6007: I2C R addr=0x%x len=%d\n", addr, msgs[i].len); + if (msgs[i].len < 1) { + ret = -EIO; + goto err; + } req = AZ6007_I2C_RD; index = msgs[i].buf[0]; value = addr;
From: Zhang Shurong zhang_shurong@foxmail.com
[ Upstream commit b97719a66970601cd3151a3e2020f4454a1c4ff6 ]
In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong zhang_shurong@foxmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/dvb-usb-v2/gl861.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb-v2/gl861.c b/drivers/media/usb/dvb-usb-v2/gl861.c index 0c434259c36f1..c71e7b93476de 100644 --- a/drivers/media/usb/dvb-usb-v2/gl861.c +++ b/drivers/media/usb/dvb-usb-v2/gl861.c @@ -120,7 +120,7 @@ static int gl861_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], } else if (num == 2 && !(msg[0].flags & I2C_M_RD) && (msg[1].flags & I2C_M_RD)) { /* I2C write + read */ - if (msg[0].len > 1 || msg[1].len > sizeof(ctx->buf)) { + if (msg[0].len != 1 || msg[1].len > sizeof(ctx->buf)) { ret = -EOPNOTSUPP; goto err; }
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit cb1d17535061ca295903f97f5cb0af9db719c02c ]
min() has strict type checking and preferred over min_t() for unsigned types to avoid overflow. Here it's unclear why min_t() was chosen since both variables are of the same type. In any case update to use min().
Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Nuno Sa nuno.sa@analog.com Link: https://lore.kernel.org/r/20230721170022.3461-5-andriy.shevchenko@linux.inte... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/industrialio-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index f3f8392623a46..354e7ee0c51c3 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -417,7 +417,7 @@ static ssize_t iio_debugfs_write_reg(struct file *file, char buf[80]; int ret;
- count = min_t(size_t, count, (sizeof(buf)-1)); + count = min(count, sizeof(buf) - 1); if (copy_from_user(buf, userbuf, count)) return -EFAULT;
From: Justin Tee justin.tee@broadcom.com
[ Upstream commit 089ea22e374aa20043e72243c47b5867d5419d38 ]
A mailbox timeout error usually indicates something has gone wrong, and a follow up reset of the HBA is a typical recovery mechanism. Introduce a MBX_TMO_ERR flag to detect such cases and have lpfc_els_flush_cmd abort ELS commands if the MBX_TMO_ERR flag condition was set. This ensures all of the registered SGL resources meant for ELS traffic are not leaked after an HBA reset.
Signed-off-by: Justin Tee justin.tee@broadcom.com Link: https://lore.kernel.org/r/20230712180522.112722-9-justintee8345@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_els.c | 25 ++++++++++++++++++------- drivers/scsi/lpfc/lpfc_init.c | 20 +++++++++++++++++--- drivers/scsi/lpfc/lpfc_sli.c | 8 +++++++- 4 files changed, 43 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 9ad233b40a9e2..664ac3069c4be 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -895,6 +895,7 @@ enum lpfc_irq_chann_mode { enum lpfc_hba_bit_flags { FABRIC_COMANDS_BLOCKED, HBA_PCI_ERR, + MBX_TMO_ERR, };
struct lpfc_hba { diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 43ebb41ded593..6b5ce9869e6b4 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -9410,11 +9410,13 @@ void lpfc_els_flush_cmd(struct lpfc_vport *vport) { LIST_HEAD(abort_list); + LIST_HEAD(cancel_list); struct lpfc_hba *phba = vport->phba; struct lpfc_sli_ring *pring; struct lpfc_iocbq *tmp_iocb, *piocb; u32 ulp_command; unsigned long iflags = 0; + bool mbx_tmo_err;
lpfc_fabric_abort_vport(vport);
@@ -9436,15 +9438,16 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) if (phba->sli_rev == LPFC_SLI_REV4) spin_lock(&pring->ring_lock);
+ mbx_tmo_err = test_bit(MBX_TMO_ERR, &phba->bit_flags); /* First we need to issue aborts to outstanding cmds on txcmpl */ list_for_each_entry_safe(piocb, tmp_iocb, &pring->txcmplq, list) { - if (piocb->cmd_flag & LPFC_IO_LIBDFC) + if (piocb->cmd_flag & LPFC_IO_LIBDFC && !mbx_tmo_err) continue;
if (piocb->vport != vport) continue;
- if (piocb->cmd_flag & LPFC_DRIVER_ABORTED) + if (piocb->cmd_flag & LPFC_DRIVER_ABORTED && !mbx_tmo_err) continue;
/* On the ELS ring we can have ELS_REQUESTs or @@ -9463,8 +9466,8 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) */ if (phba->link_state == LPFC_LINK_DOWN) piocb->cmd_cmpl = lpfc_cmpl_els_link_down; - } - if (ulp_command == CMD_GEN_REQUEST64_CR) + } else if (ulp_command == CMD_GEN_REQUEST64_CR || + mbx_tmo_err) list_add_tail(&piocb->dlist, &abort_list); }
@@ -9476,11 +9479,19 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport) list_for_each_entry_safe(piocb, tmp_iocb, &abort_list, dlist) { spin_lock_irqsave(&phba->hbalock, iflags); list_del_init(&piocb->dlist); - lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL); + if (mbx_tmo_err) + list_move_tail(&piocb->list, &cancel_list); + else + lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL); + spin_unlock_irqrestore(&phba->hbalock, iflags); } - /* Make sure HBA is alive */ - lpfc_issue_hb_tmo(phba); + if (!list_empty(&cancel_list)) + lpfc_sli_cancel_iocbs(phba, &cancel_list, IOSTAT_LOCAL_REJECT, + IOERR_SLI_ABORTED); + else + /* Make sure HBA is alive */ + lpfc_issue_hb_tmo(phba);
if (!list_empty(&abort_list)) lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d54fd153cb115..f59de61803dc8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -7563,6 +7563,8 @@ lpfc_disable_pci_dev(struct lpfc_hba *phba) void lpfc_reset_hba(struct lpfc_hba *phba) { + int rc = 0; + /* If resets are disabled then set error state and return. */ if (!phba->cfg_enable_hba_reset) { phba->link_state = LPFC_HBA_ERROR; @@ -7573,13 +7575,25 @@ lpfc_reset_hba(struct lpfc_hba *phba) if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) { lpfc_offline_prep(phba, LPFC_MBX_WAIT); } else { + if (test_bit(MBX_TMO_ERR, &phba->bit_flags)) { + /* Perform a PCI function reset to start from clean */ + rc = lpfc_pci_function_reset(phba); + lpfc_els_flush_all_cmd(phba); + } lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); lpfc_sli_flush_io_rings(phba); } lpfc_offline(phba); - lpfc_sli_brdrestart(phba); - lpfc_online(phba); - lpfc_unblock_mgmt_io(phba); + clear_bit(MBX_TMO_ERR, &phba->bit_flags); + if (unlikely(rc)) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "8888 PCI function reset failed rc %x\n", + rc); + } else { + lpfc_sli_brdrestart(phba); + lpfc_online(phba); + lpfc_unblock_mgmt_io(phba); + } }
/** diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index b44bb3ae22ad9..427a6ac803e50 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -3919,6 +3919,8 @@ void lpfc_poll_eratt(struct timer_list *t) uint64_t sli_intr, cnt;
phba = from_timer(phba, t, eratt_poll); + if (!(phba->hba_flag & HBA_SETUP)) + return;
/* Here we will also keep track of interrupts per sec of the hba */ sli_intr = phba->sli.slistat.sli_intr; @@ -7712,7 +7714,9 @@ lpfc_sli4_repost_sgl_list(struct lpfc_hba *phba, spin_unlock_irq(&phba->hbalock); } else { lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, - "3161 Failure to post sgl to port.\n"); + "3161 Failure to post sgl to port,status %x " + "blkcnt %d totalcnt %d postcnt %d\n", + status, block_cnt, total_cnt, post_cnt); return -EIO; }
@@ -8495,6 +8499,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); } } + phba->hba_flag &= ~HBA_SETUP;
lpfc_sli4_dip(phba);
@@ -9317,6 +9322,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing * it to fail all outstanding SCSI IO. */ + set_bit(MBX_TMO_ERR, &phba->bit_flags); spin_lock_irq(&phba->pport->work_port_lock); phba->pport->work_port_events &= ~WORKER_MBOX_TMO; spin_unlock_irq(&phba->pport->work_port_lock);
From: Hans Verkuil hverkuil-cisco@xs4all.nl
[ Upstream commit ee630b29ea44d1851bb6c903f400956604834463 ]
BUG_ON is unnecessary here, and in addition it confuses smatch. Replacing this with an error return help resolve this smatch warning:
drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/tuners/qt1010.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/media/tuners/qt1010.c b/drivers/media/tuners/qt1010.c index 3853a3d43d4f2..a7b19863f489e 100644 --- a/drivers/media/tuners/qt1010.c +++ b/drivers/media/tuners/qt1010.c @@ -345,11 +345,12 @@ static int qt1010_init(struct dvb_frontend *fe) else valptr = &tmpval;
- BUG_ON(i >= ARRAY_SIZE(i2c_data) - 1); - - err = qt1010_init_meas1(priv, i2c_data[i+1].reg, - i2c_data[i].reg, - i2c_data[i].val, valptr); + if (i >= ARRAY_SIZE(i2c_data) - 1) + err = -EIO; + else + err = qt1010_init_meas1(priv, i2c_data[i + 1].reg, + i2c_data[i].reg, + i2c_data[i].val, valptr); i++; break; }
From: Hans Verkuil hverkuil-cisco@xs4all.nl
[ Upstream commit 2e1796fd4904fdd6062a8e4589778ea899ea0c8d ]
It was completely unnecessary to use BUG in buffer_prepare(). Just replace it with an error return. This also fixes a smatch warning:
drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'.
Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/cx23885/cx23885-video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c index 671fc0588e431..9af2c5596121c 100644 --- a/drivers/media/pci/cx23885/cx23885-video.c +++ b/drivers/media/pci/cx23885/cx23885-video.c @@ -413,7 +413,7 @@ static int buffer_prepare(struct vb2_buffer *vb) dev->height >> 1); break; default: - BUG(); + return -EINVAL; /* should not happen */ } dprintk(2, "[%p/%d] buffer_init - %dx%d %dbpp 0x%08x - dma=0x%08lx\n", buf, buf->vb.vb2_buf.index,
From: Xiaolei Wang xiaolei.wang@windriver.com
[ Upstream commit 2319b9c87fe243327285f2fefd7374ffd75a65fc ]
The device may be scheduled during the resume process, so this cannot appear in atomic operations. Since pm_runtime_set_active will resume suppliers, put set active outside the spin lock, which is only used to protect the struct cdns data structure, otherwise the kernel will report the following warning:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1 Hardware name: Freescale i.MX8QM MEK (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x64/0x80 dump_stack+0x1c/0x38 __might_resched+0x1fc/0x240 __might_sleep+0x68/0xc0 __pm_runtime_resume+0x9c/0xe0 rpm_get_suppliers+0x68/0x1b0 __pm_runtime_set_status+0x298/0x560 cdns_resume+0xb0/0x1c0 cdns3_controller_resume.isra.0+0x1e0/0x250 cdns3_plat_resume+0x28/0x40
Signed-off-by: Xiaolei Wang xiaolei.wang@windriver.com Acked-by: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/20230616021952.1025854-1-xiaolei.wang@windriver.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/cdns3-plat.c | 3 ++- drivers/usb/cdns3/cdnsp-pci.c | 3 ++- drivers/usb/cdns3/core.c | 15 +++++++++++---- drivers/usb/cdns3/core.h | 7 +++++-- 4 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c index 2bc5d094548b6..726b2e4f67e4d 100644 --- a/drivers/usb/cdns3/cdns3-plat.c +++ b/drivers/usb/cdns3/cdns3-plat.c @@ -256,9 +256,10 @@ static int cdns3_controller_resume(struct device *dev, pm_message_t msg) cdns3_set_platform_suspend(cdns->dev, false, false);
spin_lock_irqsave(&cdns->lock, flags); - cdns_resume(cdns, !PMSG_IS_AUTO(msg)); + cdns_resume(cdns); cdns->in_lpm = false; spin_unlock_irqrestore(&cdns->lock, flags); + cdns_set_active(cdns, !PMSG_IS_AUTO(msg)); if (cdns->wakeup_pending) { cdns->wakeup_pending = false; enable_irq(cdns->wakeup_irq); diff --git a/drivers/usb/cdns3/cdnsp-pci.c b/drivers/usb/cdns3/cdnsp-pci.c index 29f433c5a6f3f..a85db23fa19f2 100644 --- a/drivers/usb/cdns3/cdnsp-pci.c +++ b/drivers/usb/cdns3/cdnsp-pci.c @@ -210,8 +210,9 @@ static int __maybe_unused cdnsp_pci_resume(struct device *dev) int ret;
spin_lock_irqsave(&cdns->lock, flags); - ret = cdns_resume(cdns, 1); + ret = cdns_resume(cdns); spin_unlock_irqrestore(&cdns->lock, flags); + cdns_set_active(cdns, 1);
return ret; } diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c index dbcdf3b24b477..7b20d2d5c262e 100644 --- a/drivers/usb/cdns3/core.c +++ b/drivers/usb/cdns3/core.c @@ -522,9 +522,8 @@ int cdns_suspend(struct cdns *cdns) } EXPORT_SYMBOL_GPL(cdns_suspend);
-int cdns_resume(struct cdns *cdns, u8 set_active) +int cdns_resume(struct cdns *cdns) { - struct device *dev = cdns->dev; enum usb_role real_role; bool role_changed = false; int ret = 0; @@ -556,15 +555,23 @@ int cdns_resume(struct cdns *cdns, u8 set_active) if (cdns->roles[cdns->role]->resume) cdns->roles[cdns->role]->resume(cdns, cdns_power_is_lost(cdns));
+ return 0; +} +EXPORT_SYMBOL_GPL(cdns_resume); + +void cdns_set_active(struct cdns *cdns, u8 set_active) +{ + struct device *dev = cdns->dev; + if (set_active) { pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); }
- return 0; + return; } -EXPORT_SYMBOL_GPL(cdns_resume); +EXPORT_SYMBOL_GPL(cdns_set_active); #endif /* CONFIG_PM_SLEEP */
MODULE_AUTHOR("Peter Chen peter.chen@nxp.com"); diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h index 2d332a788871e..4a4dbc2c15615 100644 --- a/drivers/usb/cdns3/core.h +++ b/drivers/usb/cdns3/core.h @@ -125,10 +125,13 @@ int cdns_init(struct cdns *cdns); int cdns_remove(struct cdns *cdns);
#ifdef CONFIG_PM_SLEEP -int cdns_resume(struct cdns *cdns, u8 set_active); +int cdns_resume(struct cdns *cdns); int cdns_suspend(struct cdns *cdns); +void cdns_set_active(struct cdns *cdns, u8 set_active); #else /* CONFIG_PM_SLEEP */ -static inline int cdns_resume(struct cdns *cdns, u8 set_active) +static inline int cdns_resume(struct cdns *cdns) +{ return 0; } +static inline int cdns_set_active(struct cdns *cdns, u8 set_active) { return 0; } static inline int cdns_suspend(struct cdns *cdns) { return 0; }
From: Ma Ke make_ruc2021@163.com
[ Upstream commit ce9daa2efc0872a9a68ea51dc8000df05893ef2e ]
We should verify the bound of the array to assure that host may not manipulate the index to point past endpoint array.
Signed-off-by: Ma Ke make_ruc2021@163.com Acked-by: Li Yang leoyang.li@nxp.com Link: https://lore.kernel.org/r/20230628081511.186850-1-make_ruc2021@163.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/fsl_qe_udc.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 3b1cc8fa30c83..f4e5cbd193b7b 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -1959,6 +1959,8 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { /* Get endpoint status */ int pipe = index & USB_ENDPOINT_NUMBER_MASK; + if (pipe >= USB_MAX_ENDPOINTS) + goto stall; struct qe_ep *target_ep = &udc->eps[pipe]; u16 usep;
From: Chenyuan Mi michenyuan@huawei.com
[ Upstream commit 49d736313d0975ddeb156f4f59801da833f78b30 ]
In function size_from_channelarray(), the return value 'bytes' is defined as int type. However, the calcution of 'bytes' in this function is designed to use the unsigned int type. So it is necessary to change 'bytes' type to unsigned int to avoid integer overflow.
The size_from_channelarray() is called in main() function, its return value is directly multipled by 'buf_len' and then used as the malloc() parameter. The 'buf_len' is completely controllable by user, thus a multiplication overflow may occur here. This could allocate an unexpected small area.
Signed-off-by: Chenyuan Mi michenyuan@huawei.com Link: https://lore.kernel.org/r/20230725092407.62545-1-michenyuan@huawei.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/iio/iio_generic_buffer.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c index f8deae4e26a15..44bbf80f0cfdd 100644 --- a/tools/iio/iio_generic_buffer.c +++ b/tools/iio/iio_generic_buffer.c @@ -51,9 +51,9 @@ enum autochan { * Has the side effect of filling the channels[i].location values used * in processing the buffer output. **/ -static int size_from_channelarray(struct iio_channel_info *channels, int num_channels) +static unsigned int size_from_channelarray(struct iio_channel_info *channels, int num_channels) { - int bytes = 0; + unsigned int bytes = 0; int i = 0;
while (i < num_channels) { @@ -348,7 +348,7 @@ int main(int argc, char **argv) ssize_t read_size; int dev_num = -1, trig_num = -1; char *buffer_access = NULL; - int scan_size; + unsigned int scan_size; int noevents = 0; int notrigger = 0; char *dummy; @@ -674,7 +674,16 @@ int main(int argc, char **argv) }
scan_size = size_from_channelarray(channels, num_channels); - data = malloc(scan_size * buf_len); + + size_t total_buf_len = scan_size * buf_len; + + if (scan_size > 0 && total_buf_len / scan_size != buf_len) { + ret = -EFAULT; + perror("Integer overflow happened when calculate scan_size * buf_len"); + goto error; + } + + data = malloc(total_buf_len); if (!data) { ret = -ENOMEM; goto error;
From: Konstantin Shelekhin k.shelekhin@yadro.com
[ Upstream commit 801f287c93ff95582b0a2d2163f12870a2f076d4 ]
The function lio_target_nacl_info_show() uses sprintf() in a loop to print details for every iSCSI connection in a session without checking for the buffer length. With enough iSCSI connections it's possible to overflow the buffer provided by configfs and corrupt the memory.
This patch replaces sprintf() with sysfs_emit_at() that checks for buffer boundries.
Signed-off-by: Konstantin Shelekhin k.shelekhin@yadro.com Link: https://lore.kernel.org/r/20230722152657.168859-2-k.shelekhin@yadro.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/iscsi/iscsi_target_configfs.c | 54 ++++++++++---------- 1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index 5d0f51822414e..c142a67dc7cc2 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -533,102 +533,102 @@ static ssize_t lio_target_nacl_info_show(struct config_item *item, char *page) spin_lock_bh(&se_nacl->nacl_sess_lock); se_sess = se_nacl->nacl_sess; if (!se_sess) { - rb += sprintf(page+rb, "No active iSCSI Session for Initiator" + rb += sysfs_emit_at(page, rb, "No active iSCSI Session for Initiator" " Endpoint: %s\n", se_nacl->initiatorname); } else { sess = se_sess->fabric_sess_ptr;
- rb += sprintf(page+rb, "InitiatorName: %s\n", + rb += sysfs_emit_at(page, rb, "InitiatorName: %s\n", sess->sess_ops->InitiatorName); - rb += sprintf(page+rb, "InitiatorAlias: %s\n", + rb += sysfs_emit_at(page, rb, "InitiatorAlias: %s\n", sess->sess_ops->InitiatorAlias);
- rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "LIO Session ID: %u ISID: 0x%6ph TSIH: %hu ", sess->sid, sess->isid, sess->tsih); - rb += sprintf(page+rb, "SessionType: %s\n", + rb += sysfs_emit_at(page, rb, "SessionType: %s\n", (sess->sess_ops->SessionType) ? "Discovery" : "Normal"); - rb += sprintf(page+rb, "Session State: "); + rb += sysfs_emit_at(page, rb, "Session State: "); switch (sess->session_state) { case TARG_SESS_STATE_FREE: - rb += sprintf(page+rb, "TARG_SESS_FREE\n"); + rb += sysfs_emit_at(page, rb, "TARG_SESS_FREE\n"); break; case TARG_SESS_STATE_ACTIVE: - rb += sprintf(page+rb, "TARG_SESS_STATE_ACTIVE\n"); + rb += sysfs_emit_at(page, rb, "TARG_SESS_STATE_ACTIVE\n"); break; case TARG_SESS_STATE_LOGGED_IN: - rb += sprintf(page+rb, "TARG_SESS_STATE_LOGGED_IN\n"); + rb += sysfs_emit_at(page, rb, "TARG_SESS_STATE_LOGGED_IN\n"); break; case TARG_SESS_STATE_FAILED: - rb += sprintf(page+rb, "TARG_SESS_STATE_FAILED\n"); + rb += sysfs_emit_at(page, rb, "TARG_SESS_STATE_FAILED\n"); break; case TARG_SESS_STATE_IN_CONTINUE: - rb += sprintf(page+rb, "TARG_SESS_STATE_IN_CONTINUE\n"); + rb += sysfs_emit_at(page, rb, "TARG_SESS_STATE_IN_CONTINUE\n"); break; default: - rb += sprintf(page+rb, "ERROR: Unknown Session" + rb += sysfs_emit_at(page, rb, "ERROR: Unknown Session" " State!\n"); break; }
- rb += sprintf(page+rb, "---------------------[iSCSI Session" + rb += sysfs_emit_at(page, rb, "---------------------[iSCSI Session" " Values]-----------------------\n"); - rb += sprintf(page+rb, " CmdSN/WR : CmdSN/WC : ExpCmdSN" + rb += sysfs_emit_at(page, rb, " CmdSN/WR : CmdSN/WC : ExpCmdSN" " : MaxCmdSN : ITT : TTT\n"); max_cmd_sn = (u32) atomic_read(&sess->max_cmd_sn); - rb += sprintf(page+rb, " 0x%08x 0x%08x 0x%08x 0x%08x" + rb += sysfs_emit_at(page, rb, " 0x%08x 0x%08x 0x%08x 0x%08x" " 0x%08x 0x%08x\n", sess->cmdsn_window, (max_cmd_sn - sess->exp_cmd_sn) + 1, sess->exp_cmd_sn, max_cmd_sn, sess->init_task_tag, sess->targ_xfer_tag); - rb += sprintf(page+rb, "----------------------[iSCSI" + rb += sysfs_emit_at(page, rb, "----------------------[iSCSI" " Connections]-------------------------\n");
spin_lock(&sess->conn_lock); list_for_each_entry(conn, &sess->sess_conn_list, conn_list) { - rb += sprintf(page+rb, "CID: %hu Connection" + rb += sysfs_emit_at(page, rb, "CID: %hu Connection" " State: ", conn->cid); switch (conn->conn_state) { case TARG_CONN_STATE_FREE: - rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "TARG_CONN_STATE_FREE\n"); break; case TARG_CONN_STATE_XPT_UP: - rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "TARG_CONN_STATE_XPT_UP\n"); break; case TARG_CONN_STATE_IN_LOGIN: - rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "TARG_CONN_STATE_IN_LOGIN\n"); break; case TARG_CONN_STATE_LOGGED_IN: - rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "TARG_CONN_STATE_LOGGED_IN\n"); break; case TARG_CONN_STATE_IN_LOGOUT: - rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "TARG_CONN_STATE_IN_LOGOUT\n"); break; case TARG_CONN_STATE_LOGOUT_REQUESTED: - rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "TARG_CONN_STATE_LOGOUT_REQUESTED\n"); break; case TARG_CONN_STATE_CLEANUP_WAIT: - rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "TARG_CONN_STATE_CLEANUP_WAIT\n"); break; default: - rb += sprintf(page+rb, + rb += sysfs_emit_at(page, rb, "ERROR: Unknown Connection State!\n"); break; }
- rb += sprintf(page+rb, " Address %pISc %s", &conn->login_sockaddr, + rb += sysfs_emit_at(page, rb, " Address %pISc %s", &conn->login_sockaddr, (conn->network_transport == ISCSI_TCP) ? "TCP" : "SCTP"); - rb += sprintf(page+rb, " StatSN: 0x%08x\n", + rb += sysfs_emit_at(page, rb, " StatSN: 0x%08x\n", conn->stat_sn); } spin_unlock(&sess->conn_lock);
From: Christophe Leroy christophe.leroy@csgroup.eu
[ Upstream commit 36ef11d311f405e55ad8e848c19b212ff71ef536 ]
CHECK drivers/tty/serial/cpm_uart/cpm_uart_core.c drivers/tty/serial/cpm_uart/cpm_uart_core.c:1271:39: warning: context imbalance in 'cpm_uart_console_write' - unexpected unlock
Allthough 'nolock' is not expected to change, sparse find the following form suspicious:
if (unlikely(nolock)) { local_irq_save(flags); } else { spin_lock_irqsave(&pinfo->port.lock, flags); }
cpm_uart_early_write(pinfo, s, count, true);
if (unlikely(nolock)) { local_irq_restore(flags); } else { spin_unlock_irqrestore(&pinfo->port.lock, flags); }
Rewrite it a more obvious form:
if (unlikely(oops_in_progress)) { local_irq_save(flags); cpm_uart_early_write(pinfo, s, count, true); local_irq_restore(flags); } else { spin_lock_irqsave(&pinfo->port.lock, flags); cpm_uart_early_write(pinfo, s, count, true); spin_unlock_irqrestore(&pinfo->port.lock, flags); }
Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu Link: https://lore.kernel.org/r/f7da5cdc9287960185829cfef681a7d8614efa1f.169106870... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index b4369ed45ae2d..bb25691f50007 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1257,19 +1257,14 @@ static void cpm_uart_console_write(struct console *co, const char *s, { struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; unsigned long flags; - int nolock = oops_in_progress;
- if (unlikely(nolock)) { + if (unlikely(oops_in_progress)) { local_irq_save(flags); - } else { - spin_lock_irqsave(&pinfo->port.lock, flags); - } - - cpm_uart_early_write(pinfo, s, count, true); - - if (unlikely(nolock)) { + cpm_uart_early_write(pinfo, s, count, true); local_irq_restore(flags); } else { + spin_lock_irqsave(&pinfo->port.lock, flags); + cpm_uart_early_write(pinfo, s, count, true); spin_unlock_irqrestore(&pinfo->port.lock, flags); } }
From: Baoquan He bhe@redhat.com
[ Upstream commit aefc8b57af7787c80686e49a5841e9289cb11f53 ]
On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available.
Here let OPEN_DICE depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset:
------ ERROR: modpost: "devm_memremap" [drivers/misc/open-dice.ko] undefined! ERROR: modpost: "devm_memunmap" [drivers/misc/open-dice.ko] undefined! ------
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/ Signed-off-by: Baoquan He bhe@redhat.com Cc: Derek Kiernan derek.kiernan@amd.com Cc: Dragan Cvetic dragan.cvetic@amd.com Cc: Arnd Bergmann arnd@arndb.de Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Link: https://lore.kernel.org/r/20230707135852.24292-4-bhe@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 358ad56f65245..0cef98319f0e5 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -474,6 +474,7 @@ config HISI_HIKEY_USB config OPEN_DICE tristate "Open Profile for DICE driver" depends on OF_RESERVED_MEM + depends on HAS_IOMEM help This driver exposes a DICE reserved memory region to userspace via a character device. The memory region contains Compound Device
From: Tejun Heo tj@kernel.org
[ Upstream commit 4cbfd3de737b9d00544ff0f673cb75fc37bffb6a ]
When a CPU went online or offline, wq_update_unbound_numa() was called only on the CPU which was going up or down. This works fine because all CPUs on the same NUMA node share the same pool_workqueue slot - one CPU updating it updates it for everyone in the node.
However, future changes will make each CPU use a separate pool_workqueue even when they're sharing the same worker_pool, which requires updating pool_workqueue's for all CPUs which may be sharing the same pool_workqueue on hotplug.
To accommodate the planned changes, this patch updates workqueue_on/offline_cpu() so that they call wq_update_unbound_numa() for all CPUs sharing the same NUMA node as the CPU going up or down. In the current code, the second+ calls would be noops and there shouldn't be any behavior changes.
* As wq_update_unbound_numa() is now called on multiple CPUs per each hotplug event, @cpu is renamed to @hotplug_cpu and another @cpu argument is added. The former indicates the CPU being hot[un]plugged and the latter the CPU whose pool_workqueue is being updated.
* In wq_update_unbound_numa(), cpu_off is renamed to off_cpu for consistency with the new @hotplug_cpu.
Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/workqueue.c | 34 +++++++++++++++++++++++++--------- 1 file changed, 25 insertions(+), 9 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 1e1557e42d2cc..4f8b57b322a40 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4123,7 +4123,8 @@ int apply_workqueue_attrs(struct workqueue_struct *wq, /** * wq_update_unbound_numa - update NUMA affinity of a wq for CPU hot[un]plug * @wq: the target workqueue - * @cpu: the CPU coming up or going down + * @cpu: the CPU to update pool association for + * @hotplug_cpu: the CPU coming up or going down * @online: whether @cpu is coming up or going down * * This function is to be called from %CPU_DOWN_PREPARE, %CPU_ONLINE and @@ -4143,10 +4144,10 @@ int apply_workqueue_attrs(struct workqueue_struct *wq, * CPU_DOWN_PREPARE. */ static void wq_update_unbound_numa(struct workqueue_struct *wq, int cpu, - bool online) + int hotplug_cpu, bool online) { int node = cpu_to_node(cpu); - int cpu_off = online ? -1 : cpu; + int off_cpu = online ? -1 : hotplug_cpu; struct pool_workqueue *old_pwq = NULL, *pwq; struct workqueue_attrs *target_attrs; cpumask_t *cpumask; @@ -4174,7 +4175,7 @@ static void wq_update_unbound_numa(struct workqueue_struct *wq, int cpu, * and create a new one if they don't match. If the target cpumask * equals the default pwq's, the default pwq should be used. */ - if (wq_calc_node_cpumask(wq->dfl_pwq->pool->attrs, node, cpu_off, cpumask)) { + if (wq_calc_node_cpumask(wq->dfl_pwq->pool->attrs, node, off_cpu, cpumask)) { if (cpumask_equal(cpumask, pwq->pool->attrs->cpumask)) return; } else { @@ -5144,8 +5145,15 @@ int workqueue_online_cpu(unsigned int cpu) }
/* update NUMA affinity of unbound workqueues */ - list_for_each_entry(wq, &workqueues, list) - wq_update_unbound_numa(wq, cpu, true); + list_for_each_entry(wq, &workqueues, list) { + int tcpu; + + for_each_possible_cpu(tcpu) { + if (cpu_to_node(tcpu) == cpu_to_node(cpu)) { + wq_update_unbound_numa(wq, tcpu, cpu, true); + } + } + }
mutex_unlock(&wq_pool_mutex); return 0; @@ -5163,8 +5171,15 @@ int workqueue_offline_cpu(unsigned int cpu)
/* update NUMA affinity of unbound workqueues */ mutex_lock(&wq_pool_mutex); - list_for_each_entry(wq, &workqueues, list) - wq_update_unbound_numa(wq, cpu, false); + list_for_each_entry(wq, &workqueues, list) { + int tcpu; + + for_each_possible_cpu(tcpu) { + if (cpu_to_node(tcpu) == cpu_to_node(cpu)) { + wq_update_unbound_numa(wq, tcpu, cpu, false); + } + } + } mutex_unlock(&wq_pool_mutex);
return 0; @@ -6097,7 +6112,8 @@ void __init workqueue_init(void) }
list_for_each_entry(wq, &workqueues, list) { - wq_update_unbound_numa(wq, smp_processor_id(), true); + wq_update_unbound_numa(wq, smp_processor_id(), smp_processor_id(), + true); WARN(init_rescuer(wq), "workqueue: failed to create early rescuer for %s", wq->name);
From: Xu Yang xu.yang_2@nxp.com
[ Upstream commit dda4b60ed70bd670eefda081f70c0cb20bbeb1fa ]
Some NXP processor using chipidea IP has a bug when frame babble is detected.
As per 4.15.1.1.1 Serial Bus Babble: A babble condition also exists if IN transaction is in progress at High-speed SOF2 point. This is called frame babble. The host controller must disable the port to which the frame babble is detected.
The USB controller has disabled the port (PE cleared) and has asserted USBERRINT when frame babble is detected, but PEC is not asserted. Therefore, the SW isn't aware that port has been disabled. Then the SW keeps sending packets to this port, but all of the transfers will fail.
This workaround will firstly assert PCD by SW when USBERRINT is detected and then judge whether port change has really occurred or not by polling roothub status. Because the PEC doesn't get asserted in our case, this patch will also assert it by SW when specific conditions are satisfied.
Signed-off-by: Xu Yang xu.yang_2@nxp.com Acked-by: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/20230809024432.535160-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/ehci-hcd.c | 8 ++++++-- drivers/usb/host/ehci-hub.c | 10 +++++++++- drivers/usb/host/ehci.h | 10 ++++++++++ 3 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index a1930db0da1c3..802bfafb1012b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -755,10 +755,14 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
/* normal [4.15.1.2] or error [4.15.1.1] completion */ if (likely ((status & (STS_INT|STS_ERR)) != 0)) { - if (likely ((status & STS_ERR) == 0)) + if (likely ((status & STS_ERR) == 0)) { INCR(ehci->stats.normal); - else + } else { + /* Force to check port status */ + if (ehci->has_ci_pec_bug) + status |= STS_PCD; INCR(ehci->stats.error); + } bh = 1; }
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index efe30e3be22f7..1aee392e84927 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -674,7 +674,8 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend) || (ehci->reset_done[i] && time_after_eq( - jiffies, ehci->reset_done[i]))) { + jiffies, ehci->reset_done[i])) + || ehci_has_ci_pec_bug(ehci, temp)) { if (i < 7) buf [0] |= 1 << (i + 1); else @@ -875,6 +876,13 @@ int ehci_hub_control( if (temp & PORT_PEC) status |= USB_PORT_STAT_C_ENABLE << 16;
+ if (ehci_has_ci_pec_bug(ehci, temp)) { + status |= USB_PORT_STAT_C_ENABLE << 16; + ehci_info(ehci, + "PE is cleared by HW port:%d PORTSC:%08x\n", + wIndex + 1, temp); + } + if ((temp & PORT_OCC) && (!ignore_oc && !ehci->spurious_oc)){ status |= USB_PORT_STAT_C_OVERCURRENT << 16;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index ad3f13a3eaf1b..5c0e25742e179 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -207,6 +207,7 @@ struct ehci_hcd { /* one per controller */ unsigned has_fsl_port_bug:1; /* FreeScale */ unsigned has_fsl_hs_errata:1; /* Freescale HS quirk */ unsigned has_fsl_susp_errata:1; /* NXP SUSP quirk */ + unsigned has_ci_pec_bug:1; /* ChipIdea PEC bug */ unsigned big_endian_mmio:1; unsigned big_endian_desc:1; unsigned big_endian_capbase:1; @@ -707,6 +708,15 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) */ #define ehci_has_fsl_susp_errata(e) ((e)->has_fsl_susp_errata)
+/* + * Some Freescale/NXP processors using ChipIdea IP have a bug in which + * disabling the port (PE is cleared) does not cause PEC to be asserted + * when frame babble is detected. + */ +#define ehci_has_ci_pec_bug(e, portsc) \ + ((e)->has_ci_pec_bug && ((e)->command & CMD_PSE) \ + && !(portsc & PORT_PEC) && !(portsc & PORT_PE)) + /* * While most USB host controllers implement their registers in * little-endian format, a minority (celleb companion chip) implement
From: Xu Yang xu.yang_2@nxp.com
[ Upstream commit 12e6ac69cc7e7d3367599ae26a92a0f9a18bc728 ]
Some NXP processors using ChipIdea USB IP have a bug when frame babble is detected.
Issue description: In USB camera test, our controller is host in HS mode. In ISOC IN, when device sends data across the micro frame, it causes the babble in host controller. This will clear the PE bit. In spec, it also requires to set the PEC bit and then set the PCI bit. Without the PCI interrupt, the software does not know the PE is cleared.
This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted platform datas. And the ehci host driver will assert PEC by SW when specific conditions are satisfied.
Signed-off-by: Xu Yang xu.yang_2@nxp.com Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/chipidea/ci.h | 1 + drivers/usb/chipidea/ci_hdrc_imx.c | 4 +++- drivers/usb/chipidea/core.c | 2 ++ drivers/usb/chipidea/host.c | 1 + include/linux/usb/chipidea.h | 1 + 5 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 85a803c135ab3..2ff83911219f8 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -253,6 +253,7 @@ struct ci_hdrc { bool id_event; bool b_sess_valid_event; bool imx28_write_fix; + bool has_portsc_pec_bug; bool supports_runtime_pm; bool in_lpm; bool wakeup_int; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 60b4de0a4f76d..6f04c2399dfd8 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -67,11 +67,13 @@ static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
static const struct ci_hdrc_imx_platform_flag imx7ulp_usb_data = { .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_HAS_PORTSC_PEC_MISSED | CI_HDRC_PMQOS, };
static const struct ci_hdrc_imx_platform_flag imx8ulp_usb_data = { - .flags = CI_HDRC_SUPPORTS_RUNTIME_PM, + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_HAS_PORTSC_PEC_MISSED, };
static const struct of_device_id ci_hdrc_imx_dt_ids[] = { diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 71f172ecfaabc..b9227f41cf1c0 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -1038,6 +1038,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) CI_HDRC_IMX28_WRITE_FIX); ci->supports_runtime_pm = !!(ci->platdata->flags & CI_HDRC_SUPPORTS_RUNTIME_PM); + ci->has_portsc_pec_bug = !!(ci->platdata->flags & + CI_HDRC_HAS_PORTSC_PEC_MISSED); platform_set_drvdata(pdev, ci);
ret = hw_device_init(ci, base); diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index bc3634a54c6b7..3b08c5e811707 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -151,6 +151,7 @@ static int host_start(struct ci_hdrc *ci) ehci->has_hostpc = ci->hw_bank.lpm; ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; ehci->imx28_write_fix = ci->imx28_write_fix; + ehci->has_ci_pec_bug = ci->has_portsc_pec_bug;
priv = (struct ehci_ci_priv *)ehci->priv; priv->reg_vbus = NULL; diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index ee38835ed77cc..0b4f2d5faa080 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -63,6 +63,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_IMX_IS_HSIC BIT(14) #define CI_HDRC_PMQOS BIT(15) #define CI_HDRC_PHY_VBUS_CONTROL BIT(16) +#define CI_HDRC_HAS_PORTSC_PEC_MISSED BIT(17) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
From: Sakari Ailus sakari.ailus@linux.intel.com
[ Upstream commit 9d7531be3085a8f013cf173ccc4e72e3cf493538 ]
Initialise timing struct in cio2_hw_init() to zero in order to avoid a compiler warning. The warning was a false positive.
Reported-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c index 3b76a9d0383a8..1bbe58b24d99d 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c @@ -354,7 +354,7 @@ static int cio2_hw_init(struct cio2_device *cio2, struct cio2_queue *q) void __iomem *const base = cio2->base; u8 lanes, csi2bus = q->csi2.port; u8 sensor_vc = SENSOR_VIR_CH_DFLT; - struct cio2_csi2_timing timing; + struct cio2_csi2_timing timing = { 0 }; int i, r;
fmt = cio2_find_format(NULL, &q->subdev_fmt.code);
From: Zhen Lei thunder.leizhen@huawei.com
[ Upstream commit 4d0fe8c52bb3029d83e323c961221156ab98680b ]
When I register a kset in the following way: static struct kset my_kset; kobject_set_name(&my_kset.kobj, "my_kset"); ret = kset_register(&my_kset);
A null pointer dereference exception is occurred: [ 4453.568337] Unable to handle kernel NULL pointer dereference at \ virtual address 0000000000000028 ... ... [ 4453.810361] Call trace: [ 4453.813062] kobject_get_ownership+0xc/0x34 [ 4453.817493] kobject_add_internal+0x98/0x274 [ 4453.822005] kset_register+0x5c/0xb4 [ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset] ... ...
Because I didn't initialize my_kset.kobj.ktype.
According to the description in Documentation/core-api/kobject.rst: - A ktype is the type of object that embeds a kobject. Every structure that embeds a kobject needs a corresponding ktype.
So add sanity check to make sure kset->kobj.ktype is not NULL.
Signed-off-by: Zhen Lei thunder.leizhen@huawei.com Link: https://lore.kernel.org/r/20230805084114.1298-2-thunder.leizhen@huaweicloud.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/kobject.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/lib/kobject.c b/lib/kobject.c index aa375a5d94419..207fd22ad3bde 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -850,6 +850,11 @@ int kset_register(struct kset *k) if (!k) return -EINVAL;
+ if (!k->kobj.ktype) { + pr_err("must have a ktype to be initialized properly!\n"); + return -EINVAL; + } + kset_init(k); err = kobject_add_internal(&k->kobj); if (err)
From: Rob Clark robdclark@chromium.org
[ Upstream commit af42269c3523492d71ebbe11fefae2653e9cdc78 ]
For cases where icc_bw_set() can be called in callbaths that could deadlock against shrinker/reclaim, such as runpm resume, we need to decouple the icc locking. Introduce a new icc_bw_lock for cases where we need to serialize bw aggregation and update to decouple that from paths that require memory allocation such as node/link creation/ destruction.
Fixes this lockdep splat:
====================================================== WARNING: possible circular locking dependency detected 6.2.0-rc8-debug+ #554 Not tainted ------------------------------------------------------ ring0/132 is trying to acquire lock: ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234
but task is already holding lock: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x74/0xc0 dma_resv_lockdep+0x1f4/0x2f4 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20
-> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x80/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 topology_parse_cpu_capacity+0x8c/0x178 get_cpu_for_node+0x88/0xc4 parse_cluster+0x1b0/0x28c parse_cluster+0x8c/0x28c init_cpu_topology+0x168/0x188 smp_prepare_cpus+0x24/0xf8 kernel_init_freeable+0x18c/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20
-> #2 (fs_reclaim){+.+.}-{0:0}: __fs_reclaim_acquire+0x3c/0x48 fs_reclaim_acquire+0x54/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 kzalloc.constprop.0+0x14/0x20 icc_node_create_nolock+0x4c/0xc4 icc_node_create+0x38/0x58 qcom_icc_rpmh_probe+0x1b8/0x248 platform_probe+0x70/0xc4 really_probe+0x158/0x290 __driver_probe_device+0xc8/0xe0 driver_probe_device+0x44/0x100 __driver_attach+0xf8/0x108 bus_for_each_dev+0x78/0xc4 driver_attach+0x2c/0x38 bus_add_driver+0xd0/0x1d8 driver_register+0xbc/0xf8 __platform_driver_register+0x30/0x3c qnoc_driver_init+0x24/0x30 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20
-> #1 (icc_lock){+.+.}-{3:3}: __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 icc_set_bw+0x88/0x2b4 _set_opp_bw+0x8c/0xd8 _set_opp+0x19c/0x300 dev_pm_opp_set_opp+0x84/0x94 a6xx_gmu_resume+0x18c/0x804 a6xx_pm_resume+0xf8/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc adreno_load_gpu+0xc4/0x17c msm_open+0x50/0x120 drm_file_alloc+0x17c/0x228 drm_open_helper+0x74/0x118 drm_open+0xa0/0x144 drm_stub_open+0xd4/0xe4 chrdev_open+0x1b8/0x1e4 do_dentry_open+0x2f8/0x38c vfs_open+0x34/0x40 path_openat+0x64c/0x7b4 do_filp_open+0x54/0xc4 do_sys_openat2+0x9c/0x100 do_sys_open+0x50/0x7c __arm64_sys_openat+0x28/0x34 invoke_syscall+0x8c/0x128 el0_svc_common.constprop.0+0xa0/0x11c do_el0_svc+0xac/0xbc el0_svc+0x48/0xa0 el0t_64_sync_handler+0xac/0x13c el0t_64_sync+0x190/0x194
-> #0 (&gmu->lock){+.+.}-{3:3}: __lock_acquire+0xe00/0x1060 lock_acquire+0x1e0/0x2f8 __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 a6xx_pm_resume+0xf0/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc pm_runtime_get_sync.isra.0+0x14/0x20 msm_gpu_submit+0x58/0x178 msm_job_run+0x78/0x150 drm_sched_main+0x290/0x370 kthread+0xf0/0x100 ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of: &gmu->lock --> mmu_notifier_invalidate_range_start --> dma_fence_map
Possible unsafe locking scenario:
CPU0 CPU1 ---- ---- lock(dma_fence_map); lock(mmu_notifier_invalidate_range_start); lock(dma_fence_map); lock(&gmu->lock);
*** DEADLOCK ***
2 locks held by ring0/132: #0: ffffff8087191170 (&gpu->lock){+.+.}-{3:3}, at: msm_job_run+0x64/0x150 #1: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150
stack backtrace: CPU: 7 PID: 132 Comm: ring0 Not tainted 6.2.0-rc8-debug+ #554 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Call trace: dump_backtrace.part.0+0xb4/0xf8 show_stack+0x20/0x38 dump_stack_lvl+0x9c/0xd0 dump_stack+0x18/0x34 print_circular_bug+0x1b4/0x1f0 check_noncircular+0x78/0xac __lock_acquire+0xe00/0x1060 lock_acquire+0x1e0/0x2f8 __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 a6xx_pm_resume+0xf0/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc pm_runtime_get_sync.isra.0+0x14/0x20 msm_gpu_submit+0x58/0x178 msm_job_run+0x78/0x150 drm_sched_main+0x290/0x370 kthread+0xf0/0x100 ret_from_fork+0x10/0x20
Signed-off-by: Rob Clark robdclark@chromium.org Link: https://lore.kernel.org/r/20230807171148.210181-7-robdclark@gmail.com Signed-off-by: Georgi Djakov djakov@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/interconnect/core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c index cfa52c6369d05..f4a493d78ee9a 100644 --- a/drivers/interconnect/core.c +++ b/drivers/interconnect/core.c @@ -29,6 +29,7 @@ static LIST_HEAD(icc_providers); static int providers_count; static bool synced_state; static DEFINE_MUTEX(icc_lock); +static DEFINE_MUTEX(icc_bw_lock); static struct dentry *icc_debugfs_dir;
static void icc_summary_show_one(struct seq_file *s, struct icc_node *n) @@ -632,7 +633,7 @@ int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw) if (WARN_ON(IS_ERR(path) || !path->num_nodes)) return -EINVAL;
- mutex_lock(&icc_lock); + mutex_lock(&icc_bw_lock);
old_avg = path->reqs[0].avg_bw; old_peak = path->reqs[0].peak_bw; @@ -664,7 +665,7 @@ int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw) apply_constraints(path); }
- mutex_unlock(&icc_lock); + mutex_unlock(&icc_bw_lock);
trace_icc_set_bw_end(path, ret);
@@ -967,6 +968,7 @@ void icc_node_add(struct icc_node *node, struct icc_provider *provider) return;
mutex_lock(&icc_lock); + mutex_lock(&icc_bw_lock);
node->provider = provider; list_add_tail(&node->node_list, &provider->nodes); @@ -992,6 +994,7 @@ void icc_node_add(struct icc_node *node, struct icc_provider *provider) node->avg_bw = 0; node->peak_bw = 0;
+ mutex_unlock(&icc_bw_lock); mutex_unlock(&icc_lock); } EXPORT_SYMBOL_GPL(icc_node_add); @@ -1129,6 +1132,7 @@ void icc_sync_state(struct device *dev) return;
mutex_lock(&icc_lock); + mutex_lock(&icc_bw_lock); synced_state = true; list_for_each_entry(p, &icc_providers, provider_list) { dev_dbg(p->dev, "interconnect provider is in synced state\n");
From: Dan Drown dan-netdev@drown.org
[ Upstream commit f72ae60881ff685004d7de7152517607fcd9968f ]
dcd_change notification call moved outside of the acm->read_lock to protect any future tty ldisc that calls wait_serial_change()
Signed-off-by: Dan Drown dan-netdev@drown.org Acked-by: Oliver Neukum oneukum@suse.com Link: https://lore.kernel.org/r/ZN1zV/zjPgpGlHXo@vps3.drown.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/class/cdc-acm.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 36bf051b345b8..630669a27ef5e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -318,6 +318,16 @@ static void acm_process_notification(struct acm *acm, unsigned char *buf) }
difference = acm->ctrlin ^ newctrl; + + if ((difference & USB_CDC_SERIAL_STATE_DCD) && acm->port.tty) { + struct tty_ldisc *ld = tty_ldisc_ref(acm->port.tty); + if (ld) { + if (ld->ops->dcd_change) + ld->ops->dcd_change(acm->port.tty, newctrl & USB_CDC_SERIAL_STATE_DCD); + tty_ldisc_deref(ld); + } + } + spin_lock_irqsave(&acm->read_lock, flags); acm->ctrlin = newctrl; acm->oldcount = acm->iocount;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin