The patch below does not apply to the 6.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.10.y git checkout FETCH_HEAD git cherry-pick -x dbb69b9d6234aad23b3ecd33e5bc8a8ae1485b7d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2024073054-estate-stylishly-6520@gregkh' --subject-prefix 'PATCH 6.10.y' HEAD^..

Possible dependencies:

dbb69b9d6234 ("MIPS: dts: loongson: Fix liointc IRQ polarity") d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From dbb69b9d6234aad23b3ecd33e5bc8a8ae1485b7d Mon Sep 17 00:00:00 2001 From: Jiaxun Yang jiaxun.yang@flygoat.com Date: Fri, 14 Jun 2024 16:40:10 +0100 Subject: [PATCH] MIPS: dts: loongson: Fix liointc IRQ polarity

All internal liointc interrupts are high level triggered.

Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000") Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang jiaxun.yang@flygoat.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi index f5a74338bf05..3f5255584c30 100644 --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi @@ -93,7 +93,7 @@ rtc0: rtc@1fe07800 { compatible = "loongson,ls2k1000-rtc"; reg = <0 0x1fe07800 0 0x78>; interrupt-parent = <&liointc0>; - interrupts = <60 IRQ_TYPE_LEVEL_LOW>; + interrupts = <60 IRQ_TYPE_LEVEL_HIGH>; };

uart0: serial@1fe00000 { @@ -101,7 +101,7 @@ uart0: serial@1fe00000 { reg = <0 0x1fe00000 0 0x8>; clock-frequency = <125000000>; interrupt-parent = <&liointc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; no-loopback-test; };

@@ -124,8 +124,8 @@ gmac@3,0 { "pciclass0c03";

reg = <0x1800 0x0 0x0 0x0 0x0>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>, - <13 IRQ_TYPE_LEVEL_LOW>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq", "eth_lpi"; interrupt-parent = <&liointc0>; phy-mode = "rgmii"; @@ -147,8 +147,8 @@ gmac@3,1 { "loongson, pci-gmac";

reg = <0x1900 0x0 0x0 0x0 0x0>; - interrupts = <14 IRQ_TYPE_LEVEL_LOW>, - <15 IRQ_TYPE_LEVEL_LOW>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq", "eth_lpi"; interrupt-parent = <&liointc0>; phy-mode = "rgmii"; @@ -169,7 +169,7 @@ ehci@4,1 { "pciclass0c03";

reg = <0x2100 0x0 0x0 0x0 0x0>; - interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc1>; };

@@ -180,7 +180,7 @@ ohci@4,2 { "pciclass0c03";

reg = <0x2200 0x0 0x0 0x0 0x0>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc1>; };

@@ -191,7 +191,7 @@ sata@8,0 { "pciclass0106";

reg = <0x4000 0x0 0x0 0x0 0x0>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc0>; };

@@ -206,10 +206,10 @@ pcie@9,0 { #size-cells = <2>; device_type = "pci"; #interrupt-cells = <1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>; ranges; external-facing; }; @@ -225,10 +225,10 @@ pcie@a,0 { #size-cells = <2>; device_type = "pci"; #interrupt-cells = <1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>; + interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>; ranges; external-facing; }; @@ -244,10 +244,10 @@ pcie@b,0 { #size-cells = <2>; device_type = "pci"; #interrupt-cells = <1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>; + interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>; ranges; external-facing; }; @@ -263,10 +263,10 @@ pcie@c,0 { #size-cells = <2>; device_type = "pci"; #interrupt-cells = <1>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>; ranges; external-facing; }; @@ -282,10 +282,10 @@ pcie@d,0 { #size-cells = <2>; device_type = "pci"; #interrupt-cells = <1>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>; + interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>; ranges; external-facing; }; @@ -301,10 +301,10 @@ pcie@e,0 { #size-cells = <2>; device_type = "pci"; #interrupt-cells = <1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&liointc1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>; + interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>; ranges; external-facing; };