From: Eugeniy Paltsev Eugeniy.Paltsev@synopsys.com
[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ]
As of today the ICCM and DCCM size checks are incorrectly using mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes.
Fix that.
Reported-by: Paul Greco pmgreco@us.ibm.com Signed-off-by: Eugeniy Paltsev Eugeniy.Paltsev@synopsys.com Signed-off-by: Vineet Gupta vgupta@synopsys.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arc/kernel/setup.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 9f96120eee6e..82464fae7772 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -12,6 +12,7 @@ #include <linux/root_dev.h> #include <linux/console.h> #include <linux/module.h> +#include <linux/sizes.h> #include <linux/cpu.h> #include <linux/of_fdt.h> #include <linux/of.h> @@ -333,12 +334,12 @@ static void arc_chk_core_config(void) if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr) panic("Linux built with incorrect DCCM Base address\n");
- if (CONFIG_ARC_DCCM_SZ != cpu->dccm.sz) + if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz) panic("Linux built with incorrect DCCM Size\n"); #endif
#ifdef CONFIG_ARC_HAS_ICCM - if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz) + if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz) panic("Linux built with incorrect ICCM Size\n"); #endif
From: Roman Mashak mrv@mojatatu.com
[ Upstream commit b15e62631c5f19fea9895f7632dae9c1b27fe0cd ]
When a new action is installed, firstuse field of 'tcf_t' is explicitly set to 0. Value of zero means "new action, not yet used"; as a packet hits the action, 'firstuse' is stamped with the current jiffies value.
tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.
Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo") Cc: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: Roman Mashak mrv@mojatatu.com Acked-by: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/act_api.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/net/act_api.h b/include/net/act_api.h index 82f3c912a5b1..051b90779708 100644 --- a/include/net/act_api.h +++ b/include/net/act_api.h @@ -94,7 +94,8 @@ static inline void tcf_tm_dump(struct tcf_t *dtm, const struct tcf_t *stm) { dtm->install = jiffies_to_clock_t(jiffies - stm->install); dtm->lastuse = jiffies_to_clock_t(jiffies - stm->lastuse); - dtm->firstuse = jiffies_to_clock_t(jiffies - stm->firstuse); + dtm->firstuse = stm->firstuse ? + jiffies_to_clock_t(jiffies - stm->firstuse) : 0; dtm->expires = jiffies_to_clock_t(stm->expires); }
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit d7110a26e5905ec2fe3fc88bc6a538901accb72b ]
When building with Clang + -Wtautological-compare and CONFIG_CPUMASK_OFFSTACK unset:
arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL && ^~~~~~~~~~~ ~~~~ arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) ^~~~~~~~~~~ ~~~~ 2 warnings generated.
Commit
f7e30f01a9e2 ("cpumask: Add helper cpumask_available()")
added cpumask_available() to fix warnings of this nature. Use that here so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's value.
Reported-by: Sedat Dilek sedat.dilek@gmail.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Nick Desaulniers ndesaulniers@google.com Acked-by: Steven Rostedt (VMware) rostedt@goodmis.org Link: https://github.com/ClangBuiltLinux/linux/issues/982 Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/mm/mmio-mod.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index bef36622e408..abd4fa587ca4 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -385,7 +385,7 @@ static void enter_uniprocessor(void) int cpu; int err;
- if (downed_cpus == NULL && + if (!cpumask_available(downed_cpus) && !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) { pr_notice("Failed to allocate mask\n"); goto out; @@ -415,7 +415,7 @@ static void leave_uniprocessor(void) int cpu; int err;
- if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) + if (!cpumask_available(downed_cpus) || cpumask_weight(downed_cpus) == 0) return; pr_notice("Re-enabling CPUs...\n"); for_each_cpu(cpu, downed_cpus) {
From: Jeremy Kerr jk@ozlabs.org
[ Upstream commit ef01cee2ee1b369c57a936166483d40942bcc3e3 ]
In bmac_get_station_address, We're reading two bytes at a time from ROM, but we do that six times, resulting in 12 bytes of read & writes. This means we will write off the end of the six-byte destination buffer.
This change fixes the for-loop to only read/write six bytes.
Based on a proposed fix from Finn Thain fthain@telegraphics.com.au.
Signed-off-by: Jeremy Kerr jk@ozlabs.org Reported-by: Stan Johnson userm57@yahoo.com Tested-by: Stan Johnson userm57@yahoo.com Reported-by: Finn Thain fthain@telegraphics.com.au Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/apple/bmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index a65d7a60f116..ffa7e7e6d18d 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -1187,7 +1187,7 @@ bmac_get_station_address(struct net_device *dev, unsigned char *ea) int i; unsigned short data;
- for (i = 0; i < 6; i++) + for (i = 0; i < 3; i++) { reset_and_select_srom(dev); data = read_srom(dev, i + EnetAddressOffset/2, SROMAddressBits);
From: Valentin Longchamp valentin@longchamp.me
[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]
ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac.
The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1].
A possible workaround was the revert of commit net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept.
The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation.
[1] https://lists.openwall.net/netdev/2020/01/08/201
Signed-off-by: Valentin Longchamp valentin@longchamp.me Acked-by: Matteo Ghidoni matteo.ghidoni@ch.abb.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 714593023bbc..af922bac19ae 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -45,6 +45,7 @@ #include <soc/fsl/qe/ucc.h> #include <soc/fsl/qe/ucc_fast.h> #include <asm/machdep.h> +#include <net/sch_generic.h>
#include "ucc_geth.h"
@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
static void ugeth_quiesce(struct ucc_geth_private *ugeth) { - /* Prevent any further xmits, plus detach the device. */ - netif_device_detach(ugeth->ndev); - - /* Wait for any current xmits to finish. */ - netif_tx_disable(ugeth->ndev); + /* Prevent any further xmits */ + netif_tx_stop_all_queues(ugeth->ndev);
/* Disable the interrupt to avoid NAPI rescheduling. */ disable_irq(ugeth->ug_info->uf_info.irq); @@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth) { napi_enable(&ugeth->napi); enable_irq(ugeth->ug_info->uf_info.irq); - netif_device_attach(ugeth->ndev); + + /* allow to xmit again */ + netif_tx_wake_all_queues(ugeth->ndev); + __netdev_watchdog_up(ugeth->ndev); }
/* Called every time the controller might need to be made
From: Jonathan McDowell noodles@earth.li
[ Upstream commit a96ac8a0045e3cbe3e5af6d1b3c78c6c2065dec5 ]
The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like:
[ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed
This patch, a slightly cleaned up version of one posted by Sergey Sergeev in:
https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257
correctly enables the clock; we have already configured the source just before this.
Tested on a MikroTik RB3011.
Signed-off-by: Jonathan McDowell noodles@earth.li Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c index 11a4a81b0397..bcc5d1e16ce2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c @@ -330,6 +330,19 @@ static int ipq806x_gmac_probe(struct platform_device *pdev) /* Enable PTP clock */ regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id); + switch (gmac->phy_mode) { + case PHY_INTERFACE_MODE_RGMII: + val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | + NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); + break; + case PHY_INTERFACE_MODE_SGMII: + val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) | + NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id); + break; + default: + /* We don't get here; the switch above will have errored out */ + unreachable(); + } regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
From: Qiushi Wu wu000273@umn.edu
[ Upstream commit 5a730153984dd13f82ffae93d7170d76eba204e9 ]
In cas_init_one(), "pdev" is requested by "pci_request_regions", but it was not released after a call of the function “pci_write_config_byte” failed. Thus replace the jump target “err_write_cacheline” by "err_out_free_res".
Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.") Signed-off-by: Qiushi Wu wu000273@umn.edu Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sun/cassini.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index 062bce9acde6..bfe7b55f9714 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -4980,7 +4980,7 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) cas_cacheline_size)) { dev_err(&pdev->dev, "Could not set PCI cache " "line size\n"); - goto err_write_cacheline; + goto err_out_free_res; } } #endif @@ -5151,7 +5151,6 @@ err_out_iounmap: err_out_free_res: pci_release_regions(pdev);
-err_write_cacheline: /* Try to restore it in case the error occurred after we * set it. */
From: Qiushi Wu wu000273@umn.edu
[ Upstream commit febfd9d3c7f74063e8e630b15413ca91b567f963 ]
In function mlx4_opreq_action(), pointer "mailbox" is not released, when mlx4_cmd_box() return and error, causing a memory leak bug. Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can free this pointer.
Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware") Signed-off-by: Qiushi Wu wu000273@umn.edu Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx4/fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 9af0887c8a29..fe9dc1b3078c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -2704,7 +2704,7 @@ void mlx4_opreq_action(struct work_struct *work) if (err) { mlx4_err(dev, "Failed to retrieve required operation: %d\n", err); - return; + goto out; } MLX4_GET(modifier, outbox, GET_OP_REQ_MODIFIER_OFFSET); MLX4_GET(token, outbox, GET_OP_REQ_TOKEN_OFFSET);
From: Dinghao Liu dinghao.liu@zju.edu.cn
[ Upstream commit 539d39ad0c61b35f69565a037d7586deaf6d6166 ]
Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced.
Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/smsc/smsc911x.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 4143659615e1..264136dba674 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2506,20 +2506,20 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
retval = smsc911x_init(dev); if (retval < 0) - goto out_disable_resources; + goto out_init_fail;
netif_carrier_off(dev);
retval = smsc911x_mii_init(pdev, dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); - goto out_disable_resources; + goto out_init_fail; }
retval = register_netdev(dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i registering device", retval); - goto out_disable_resources; + goto out_init_fail; } else { SMSC_TRACE(pdata, probe, "Network interface: "%s"", dev->name); @@ -2560,9 +2560,10 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
return 0;
-out_disable_resources: +out_init_fail: pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); +out_disable_resources: (void)smsc911x_disable_resources(pdev); out_enable_resources_fail: smsc911x_free_resources(pdev);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin