On 2020/04/27 15:19, Vincent Chen wrote:

The current max_pfn equals to zero. In this case, I found it caused users cannot get some page information through /proc such as kpagecount in v5.6 kernel because of new sanity checks. The following message is displayed by stress-ng test suite with the command "stress-ng --verbose --physpage 1 -t 1" on HiFive unleashed board.

# stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [109] 4 processors online, 4 processors configured stress-ng: info: [109] dispatching hogs: 1 physpage stress-ng: debug: [109] cache allocate: reducing cache level from L3 (too high) to L0 stress-ng: debug: [109] get_cpu_cache: invalid cache_level: 0 stress-ng: info: [109] cache allocate: using built-in defaults as no suitable cache found stress-ng: debug: [109] cache allocate: default cache size: 2048K stress-ng: debug: [109] starting stressors stress-ng: debug: [109] 1 stressor spawned stress-ng: debug: [110] stress-ng-physpage: started [110] (instance 0) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd34de000 in /proc/kpagecount, errno=0 (Success) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) ... stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) stress-ng: debug: [110] stress-ng-physpage: exited [110] (instance 0) stress-ng: debug: [109] process [110] terminated stress-ng: info: [109] successful run completed in 1.00s #

After applying this patch, the kernel can pass the test.

# stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [104] 4 processors online, 4 processors configured stress-ng: info: [104] dispatching hogs: 1 physpage stress-ng: info: [104] cache allocate: using defaults, can't determine cache details from sysfs stress-ng: debug: [104] cache allocate: default cache size: 2048K stress-ng: debug: [104] starting stressors stress-ng: debug: [104] 1 stressor spawned stress-ng: debug: [105] stress-ng-physpage: started [105] (instance 0) stress-ng: debug: [105] stress-ng-physpage: exited [105] (instance 0) stress-ng: debug: [104] process [105] terminated stress-ng: info: [104] successful run completed in 1.01s #

Fixes: 0651c263c8e3 (RISC-V: Move setup_bootmem() to mm/init.c) Cc: stable@vger.kernel.org

Signed-off-by: Vincent Chen vincent.chen@sifive.com Reviewed-by: Anup Patel anup@brainfault.ort

email typo not fixed...

As Anup mentioned, it should be: anup@brainfault.org (".org", not ".ort").

Reviewed-by: Yash Shah yash.shah@sifive.com Tested-by: Yash Shah yash.shah@sifive.com

Changes since v1:

1. Add Fixes line and Cc stable kernel

---

arch/riscv/mm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index fab855963c73..157924baa191 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -149,7 +149,8 @@ void __init setup_bootmem(void) memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start); set_max_mapnr(PFN_DOWN(mem_size));

• max_low_pfn = PFN_DOWN(memblock_end_of_DRAM());

• max_pfn = PFN_DOWN(memblock_end_of_DRAM());
• max_low_pfn = max_pfn;

#ifdef CONFIG_BLK_DEV_INITRD setup_initrd();