[PATCH AUTOSEL 5.14 01/40] spi: rockchip: handle zero length transfers without timing out
From: Tobias Schramm t.schramm@manjaro.org
[ Upstream commit 5457773ef99f25fcc4b238ac76b68e28273250f4 ]
Previously zero length transfers submitted to the Rokchip SPI driver would time out in the SPI layer. This happens because the SPI peripheral does not trigger a transfer completion interrupt for zero length transfers.
Fix that by completing zero length transfers immediately at start of transfer.
Signed-off-by: Tobias Schramm t.schramm@manjaro.org Link: https://lore.kernel.org/r/20210827050357.165409-1-t.schramm@manjaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-rockchip.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 540861ca2ba3..553b6b9d0222 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -600,6 +600,12 @@ static int rockchip_spi_transfer_one( int ret; bool use_dma;
+ /* Zero length transfers won't trigger an interrupt on completion */ + if (!xfer->len) { + spi_finalize_current_transfer(ctlr); + return 1; + } + WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && (readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY));
From: David Howells dhowells@redhat.com
[ Upstream commit 3978d816523991dd86cf9aae88c295230a5ea3b2 ]
afs_d_revalidate() should only be validating the directory entry it is given and the directory to which that belongs; it shouldn't be validating the inode/vnode to which that dentry points. Besides, validation need to be done even if we don't call afs_d_revalidate() - which might be the case if we're starting from a file descriptor.
In order for afs_d_revalidate() to be fixed, validation points must be added in some other places. Certain directory operations, such as afs_unlink(), already check this, but not all and not all file operations either.
Note that the validation of a vnode not only checks to see if the attributes we have are correct, but also gets a promise from the server to notify us if that file gets changed by a third party.
Add the following checks:
- Check the vnode we're going to make a hard link to. - Check the vnode we're going to move/rename. - Check the vnode we're going to read from. - Check the vnode we're going to write to. - Check the vnode we're going to sync. - Check the vnode we're going to make a mapped page writable for.
Some of these aren't strictly necessary as we're going to perform a server operation that might get the attributes anyway from which we can determine if something changed - though it might not get us a callback promise.
Signed-off-by: David Howells dhowells@redhat.com Tested-by: Markus Suvanto markus.suvanto@gmail.com cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111667354.283156.12720698333342917516.stgit@war... Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/dir.c | 11 +++++++++++ fs/afs/file.c | 16 +++++++++++++++- fs/afs/write.c | 17 +++++++++++++++-- 3 files changed, 41 insertions(+), 3 deletions(-)
diff --git a/fs/afs/dir.c b/fs/afs/dir.c index ac829e63c570..a8e3ae55f1f9 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -1792,6 +1792,10 @@ static int afs_link(struct dentry *from, struct inode *dir, goto error; }
+ ret = afs_validate(vnode, op->key); + if (ret < 0) + goto error_op; + afs_op_set_vnode(op, 0, dvnode); afs_op_set_vnode(op, 1, vnode); op->file[0].dv_delta = 1; @@ -1805,6 +1809,8 @@ static int afs_link(struct dentry *from, struct inode *dir, op->create.reason = afs_edit_dir_for_link; return afs_do_sync_operation(op);
+error_op: + afs_put_operation(op); error: d_drop(dentry); _leave(" = %d", ret); @@ -1989,6 +1995,11 @@ static int afs_rename(struct user_namespace *mnt_userns, struct inode *old_dir, if (IS_ERR(op)) return PTR_ERR(op);
+ ret = afs_validate(vnode, op->key); + op->error = ret; + if (ret < 0) + goto error; + afs_op_set_vnode(op, 0, orig_dvnode); afs_op_set_vnode(op, 1, new_dvnode); /* May be same as orig_dvnode */ op->file[0].dv_delta = 1; diff --git a/fs/afs/file.c b/fs/afs/file.c index db035ae2a134..5efa1cf2a20a 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -24,12 +24,13 @@ static void afs_invalidatepage(struct page *page, unsigned int offset, static int afs_releasepage(struct page *page, gfp_t gfp_flags);
static void afs_readahead(struct readahead_control *ractl); +static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter);
const struct file_operations afs_file_operations = { .open = afs_open, .release = afs_release, .llseek = generic_file_llseek, - .read_iter = generic_file_read_iter, + .read_iter = afs_file_read_iter, .write_iter = afs_file_write, .mmap = afs_file_mmap, .splice_read = generic_file_splice_read, @@ -502,3 +503,16 @@ static int afs_file_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_ops = &afs_vm_ops; return ret; } + +static ssize_t afs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter) +{ + struct afs_vnode *vnode = AFS_FS_I(file_inode(iocb->ki_filp)); + struct afs_file *af = iocb->ki_filp->private_data; + int ret; + + ret = afs_validate(vnode, af->key); + if (ret < 0) + return ret; + + return generic_file_read_iter(iocb, iter); +} diff --git a/fs/afs/write.c b/fs/afs/write.c index c0534697268e..0886dc007970 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -801,6 +801,7 @@ int afs_writepages(struct address_space *mapping, ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) { struct afs_vnode *vnode = AFS_FS_I(file_inode(iocb->ki_filp)); + struct afs_file *af = iocb->ki_filp->private_data; ssize_t result; size_t count = iov_iter_count(from);
@@ -816,6 +817,10 @@ ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) if (!count) return 0;
+ result = afs_validate(vnode, af->key); + if (result < 0) + return result; + result = generic_file_write_iter(iocb, from);
_leave(" = %zd", result); @@ -829,13 +834,18 @@ ssize_t afs_file_write(struct kiocb *iocb, struct iov_iter *from) */ int afs_fsync(struct file *file, loff_t start, loff_t end, int datasync) { - struct inode *inode = file_inode(file); - struct afs_vnode *vnode = AFS_FS_I(inode); + struct afs_vnode *vnode = AFS_FS_I(file_inode(file)); + struct afs_file *af = file->private_data; + int ret;
_enter("{%llx:%llu},{n=%pD},%d", vnode->fid.vid, vnode->fid.vnode, file, datasync);
+ ret = afs_validate(vnode, af->key); + if (ret < 0) + return ret; + return file_write_and_wait_range(file, start, end); }
@@ -849,11 +859,14 @@ vm_fault_t afs_page_mkwrite(struct vm_fault *vmf) struct file *file = vmf->vma->vm_file; struct inode *inode = file_inode(file); struct afs_vnode *vnode = AFS_FS_I(inode); + struct afs_file *af = file->private_data; unsigned long priv; vm_fault_t ret = VM_FAULT_RETRY;
_enter("{{%llx:%llu}},{%lx}", vnode->fid.vid, vnode->fid.vnode, page->index);
+ afs_validate(vnode, af->key); + sb_start_pagefault(inode->i_sb);
/* Wait for the page to be written to the cache before we allow it to
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 3bf1669b0e033c885ebcb1ddc2334088dd125f2d ]
Add touchscreen info for the Chuwi HiBook (CWI514) tablet. This includes info for getting the firmware directly from the UEFI, so that the user does not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB, without requiring any manual setup.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210905130210.32810-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 37 ++++++++++++++++++++++++++ 1 file changed, 37 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 0e1451b1d9c6..1f9cb756b103 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -141,6 +141,33 @@ static const struct ts_dmi_data chuwi_hi10_pro_data = { .properties = chuwi_hi10_pro_props, };
+static const struct property_entry chuwi_hibook_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 30), + PROPERTY_ENTRY_U32("touchscreen-min-y", 4), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1892), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1276), + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hibook.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), + { } +}; + +static const struct ts_dmi_data chuwi_hibook_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hibook.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 40392, + .sha256 = { 0xf7, 0xc0, 0xe8, 0x5a, 0x6c, 0xf2, 0xeb, 0x8d, + 0x12, 0xc4, 0x45, 0xbf, 0x55, 0x13, 0x4c, 0x1a, + 0x13, 0x04, 0x31, 0x08, 0x65, 0x73, 0xf7, 0xa8, + 0x1b, 0x7d, 0x59, 0xc9, 0xe6, 0x97, 0xf7, 0x38 }, + }, + .acpi_name = "MSSL0017:00", + .properties = chuwi_hibook_props, +}; + static const struct property_entry chuwi_vi8_props[] = { PROPERTY_ENTRY_U32("touchscreen-min-x", 4), PROPERTY_ENTRY_U32("touchscreen-min-y", 6), @@ -979,6 +1006,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), }, }, + { + /* Chuwi HiBook (CWI514) */ + .driver_data = (void *)&chuwi_hibook_data, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), + /* Above matches are too generic, add bios-date match */ + DMI_MATCH(DMI_BIOS_DATE, "05/07/2016"), + }, + }, { /* Chuwi Vi8 (CWI506) */ .driver_data = (void *)&chuwi_vi8_data,
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 196159d278ae3b49e7bbb7c76822e6008fd89b97 ]
Add info for getting the firmware directly from the UEFI for the Chuwi Hi10 Plus (CWI527), so that the user does not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB, without requiring any manual setup.
Also tweak the min and width/height values a bit for more accurate position reporting.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210905130210.32810-2-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 1f9cb756b103..033f797861d8 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -100,10 +100,10 @@ static const struct ts_dmi_data chuwi_hi10_air_data = { };
static const struct property_entry chuwi_hi10_plus_props[] = { - PROPERTY_ENTRY_U32("touchscreen-min-x", 0), - PROPERTY_ENTRY_U32("touchscreen-min-y", 5), - PROPERTY_ENTRY_U32("touchscreen-size-x", 1914), - PROPERTY_ENTRY_U32("touchscreen-size-y", 1283), + PROPERTY_ENTRY_U32("touchscreen-min-x", 12), + PROPERTY_ENTRY_U32("touchscreen-min-y", 10), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1908), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1270), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10plus.fw"), PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), @@ -111,6 +111,15 @@ static const struct property_entry chuwi_hi10_plus_props[] = { };
static const struct ts_dmi_data chuwi_hi10_plus_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hi10plus.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 34056, + .sha256 = { 0xfd, 0x0a, 0x08, 0x08, 0x3c, 0xa6, 0x34, 0x4e, + 0x2c, 0x49, 0x9c, 0xcd, 0x7d, 0x44, 0x9d, 0x38, + 0x10, 0x68, 0xb5, 0xbd, 0xb7, 0x2a, 0x63, 0xb5, + 0x67, 0x0b, 0x96, 0xbd, 0x89, 0x67, 0x85, 0x09 }, + }, .acpi_name = "MSSL0017:00", .properties = chuwi_hi10_plus_props, };
From: Dai Ngo dai.ngo@oracle.com
[ Upstream commit 02579b2ff8b0becfb51d85a975908ac4ab15fba8 ]
When the back channel enters SEQ4_STATUS_CB_PATH_DOWN state, the client recovers by sending BIND_CONN_TO_SESSION but the server fails to recover the back channel and leaves it as NFSD4_CB_DOWN.
Fix by enhancing nfsd4_bind_conn_to_session to probe the back channel by calling nfsd4_probe_callback.
Signed-off-by: Dai Ngo dai.ngo@oracle.com Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfsd/nfs4state.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 3d805f5b1f5d..1c33a5255893 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -3570,7 +3570,7 @@ static struct nfsd4_conn *__nfsd4_find_conn(struct svc_xprt *xpt, struct nfsd4_s }
static __be32 nfsd4_match_existing_connection(struct svc_rqst *rqst, - struct nfsd4_session *session, u32 req) + struct nfsd4_session *session, u32 req, struct nfsd4_conn **conn) { struct nfs4_client *clp = session->se_client; struct svc_xprt *xpt = rqst->rq_xprt; @@ -3593,6 +3593,8 @@ static __be32 nfsd4_match_existing_connection(struct svc_rqst *rqst, else status = nfserr_inval; spin_unlock(&clp->cl_lock); + if (status == nfs_ok && conn) + *conn = c; return status; }
@@ -3617,8 +3619,16 @@ __be32 nfsd4_bind_conn_to_session(struct svc_rqst *rqstp, status = nfserr_wrong_cred; if (!nfsd4_mach_creds_match(session->se_client, rqstp)) goto out; - status = nfsd4_match_existing_connection(rqstp, session, bcts->dir); - if (status == nfs_ok || status == nfserr_inval) + status = nfsd4_match_existing_connection(rqstp, session, + bcts->dir, &conn); + if (status == nfs_ok) { + if (bcts->dir == NFS4_CDFC4_FORE_OR_BOTH || + bcts->dir == NFS4_CDFC4_BACK) + conn->cn_flags |= NFS4_CDFC4_BACK; + nfsd4_probe_callback(session->se_client); + goto out; + } + if (status == nfserr_inval) goto out; status = nfsd4_map_bcts_dir(&bcts->dir); if (status)
From: Qu Wenruo wqu@suse.com
[ Upstream commit bbc9a6eb5eec03dcafee266b19f56295e3b2aa8f ]
There is a BUG_ON() in btrfs_csum_one_bio() to catch code logic error. It has indeed caught several bugs during subpage development. But the BUG_ON() itself will bring down the whole system which is an overkill.
Replace it with a WARN() and exit gracefully, so that it won't crash the whole system while we can still catch the code logic error.
Signed-off-by: Qu Wenruo wqu@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/file-item.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index df6631eefc65..5e8a56113b23 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -666,7 +666,18 @@ blk_status_t btrfs_csum_one_bio(struct btrfs_inode *inode, struct bio *bio,
if (!ordered) { ordered = btrfs_lookup_ordered_extent(inode, offset); - BUG_ON(!ordered); /* Logic error */ + /* + * The bio range is not covered by any ordered extent, + * must be a code logic error. + */ + if (unlikely(!ordered)) { + WARN(1, KERN_WARNING + "no ordered extent for root %llu ino %llu offset %llu\n", + inode->root->root_key.objectid, + btrfs_ino(inode), offset); + kvfree(sums); + return BLK_STS_IOERR; + } }
nr_sectors = BTRFS_BYTES_TO_BLKS(fs_info,
From: Filipe Manana fdmanana@suse.com
[ Upstream commit 6b225baababf1e3d41a4250e802cbd193e1343fb ]
When we get an error flushing one device, during a super block commit, we record the error in the device structure, in the field 'last_flush_error'. This is used to later check if we should error out the super block commit, depending on whether the number of flush errors is greater than or equals to the maximum tolerated device failures for a raid profile.
However if we get a transient device flush error, unmount the filesystem and later try to mount it, we can fail the mount because we treat that past error as critical and consider the device is missing. Even if it's very likely that the error will happen again, as it's probably due to a hardware related problem, there may be cases where the error might not happen again. One example is during testing, and a test case like the new generic/648 from fstests always triggers this. The test cases generic/019 and generic/475 also trigger this scenario, but very sporadically.
When this happens we get an error like this:
$ mount /dev/sdc /mnt mount: /mnt wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error.
$ dmesg (...) [12918.886926] BTRFS warning (device sdc): chunk 13631488 missing 1 devices, max tolerance is 0 for writable mount [12918.888293] BTRFS warning (device sdc): writable mount is not allowed due to too many missing devices [12918.890853] BTRFS error (device sdc): open_ctree failed
The failure happens because when btrfs_check_rw_degradable() is called at mount time, or at remount from RO to RW time, is sees a non zero value in a device's ->last_flush_error attribute, and therefore considers that the device is 'missing'.
Fix this by setting a device's ->last_flush_error to zero when we close a device, making sure the error is not seen on the next mount attempt. We only need to track flush errors during the current mount, so that we never commit a super block if such errors happened.
Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/volumes.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 682416d4edef..19c780242e12 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1149,6 +1149,19 @@ static void btrfs_close_one_device(struct btrfs_device *device) atomic_set(&device->dev_stats_ccnt, 0); extent_io_tree_release(&device->alloc_state);
+ /* + * Reset the flush error record. We might have a transient flush error + * in this mount, and if so we aborted the current transaction and set + * the fs to an error state, guaranteeing no super blocks can be further + * committed. However that error might be transient and if we unmount the + * filesystem and mount it again, we should allow the mount to succeed + * (btrfs_check_rw_degradable() should not fail) - if after mounting the + * filesystem again we still get flush errors, then we will again abort + * any transaction and set the error state, guaranteeing no commits of + * unsafe super blocks. + */ + device->last_flush_error = 0; + /* Verify the device is back in a pristine state */ ASSERT(!test_bit(BTRFS_DEV_STATE_FLUSH_SENT, &device->dev_state)); ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state));
From: Vladimir Oltean vladimir.oltean@nxp.com
[ Upstream commit cf9579976f724ad517cc15b7caadea728c7e245c ]
MDIO-attached devices might have interrupts and other things that might need quiesced when we kexec into a new kernel. Things are even more creepy when those interrupt lines are shared, and in that case it is absolutely mandatory to disable all interrupt sources.
Moreover, MDIO devices might be DSA switches, and DSA needs its own shutdown method to unlink from the DSA master, which is a new requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings").
So introduce a ->shutdown method in the MDIO device driver structure.
Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Reviewed-by: Andrew Lunn andrew@lunn.ch Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/mdio_device.c | 11 +++++++++++ include/linux/mdio.h | 3 +++ 2 files changed, 14 insertions(+)
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c index c94cb5382dc9..250742ffdfd9 100644 --- a/drivers/net/phy/mdio_device.c +++ b/drivers/net/phy/mdio_device.c @@ -179,6 +179,16 @@ static int mdio_remove(struct device *dev) return 0; }
+static void mdio_shutdown(struct device *dev) +{ + struct mdio_device *mdiodev = to_mdio_device(dev); + struct device_driver *drv = mdiodev->dev.driver; + struct mdio_driver *mdiodrv = to_mdio_driver(drv); + + if (mdiodrv->shutdown) + mdiodrv->shutdown(mdiodev); +} + /** * mdio_driver_register - register an mdio_driver with the MDIO layer * @drv: new mdio_driver to register @@ -193,6 +203,7 @@ int mdio_driver_register(struct mdio_driver *drv) mdiodrv->driver.bus = &mdio_bus_type; mdiodrv->driver.probe = mdio_probe; mdiodrv->driver.remove = mdio_remove; + mdiodrv->driver.shutdown = mdio_shutdown;
retval = driver_register(&mdiodrv->driver); if (retval) { diff --git a/include/linux/mdio.h b/include/linux/mdio.h index ffb787d5ebde..5e6dc38f418e 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -80,6 +80,9 @@ struct mdio_driver {
/* Clears up any memory if needed */ void (*remove)(struct mdio_device *mdiodev); + + /* Quiesces the device on system shutdown, turns off interrupts etc */ + void (*shutdown)(struct mdio_device *mdiodev); };
static inline struct mdio_driver *
From: Jan Beulich jbeulich@suse.com
[ Upstream commit 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f ]
When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the special considerations for the head of the SKB no longer apply. Don't mistakenly report ERROR to the frontend for the first entry in the list, even if - from all I can tell - this shouldn't matter much as the overall transmit will need to be considered failed anyway.
Signed-off-by: Jan Beulich jbeulich@suse.com Reviewed-by: Paul Durrant paul@xen.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 39a01c2a3058..32d5bc4919d8 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -499,7 +499,7 @@ static int xenvif_tx_check_gop(struct xenvif_queue *queue, * the header's copy failed, and they are * sharing a slot, send an error */ - if (i == 0 && sharedslot) + if (i == 0 && !first_shinfo && sharedslot) xenvif_idx_release(queue, pending_idx, XEN_NETIF_RSP_ERROR); else
From: Linus Torvalds torvalds@linux-foundation.org
[ Upstream commit d8b1e10a2b8efaf71d151aa756052fbf2f3b6d57 ]
Guenter reported [1] that the pci_iounmap() changes remain problematic, with sparc64 allnoconfig and tinyconfig still not building due to the header file changes and confusion with the arch-specific pci_iounmap() implementation.
I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of doing its own thing, since it turns out that the sparc64 version of pci_iounmap() is somewhat buggy (see [2]). But in the meantime, this just fixes the build by avoiding the trivial re-definition of the empty case.
Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/ [1] Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvL... [2] Reported-by: Guenter Roeck linux@roeck-us.net Cc: David Miller davem@davemloft.net Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/sparc/lib/iomap.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/sparc/lib/iomap.c b/arch/sparc/lib/iomap.c index c9da9f139694..f3a8cd491ce0 100644 --- a/arch/sparc/lib/iomap.c +++ b/arch/sparc/lib/iomap.c @@ -19,8 +19,10 @@ void ioport_unmap(void __iomem *addr) EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap);
+#ifdef CONFIG_PCI void pci_iounmap(struct pci_dev *dev, void __iomem * addr) { /* nothing to do */ } EXPORT_SYMBOL(pci_iounmap); +#endif
From: José Expósito jose.exposito89@gmail.com
[ Upstream commit b201cb0ebe87b209e252d85668e517ac1929e250 ]
Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE reports.
Add an allow list and accept such reports only from devices in it.
Bug reported for Dell XPS 17 9710 on: https://gitlab.freedesktop.org/libinput/libinput/-/issues/662
Reported-by: Tobias Gurtzick magic@wizardtales.com Suggested-by: Hans de Goede hdegoede@redhat.com Tested-by: Tobias Gurtzick magic@wizardtales.com Signed-off-by: José Expósito jose.exposito89@gmail.com Link: https://lore.kernel.org/r/20210920160312.9787-1-jose.exposito89@gmail.com [hdegoede@redhat.com: Check dmi_switches_auto_add_allow_list only once] Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel-hid.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index 2e4e97a626a5..7b03b497d93b 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -118,12 +118,30 @@ static const struct dmi_system_id dmi_vgbs_allow_list[] = { { } };
+/* + * Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE + * reports. Accept such reports only from devices in this list. + */ +static const struct dmi_system_id dmi_auto_add_switch[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */), + }, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */), + }, + }, + {} /* Array terminator */ +}; + struct intel_hid_priv { struct input_dev *input_dev; struct input_dev *array; struct input_dev *switches; bool wakeup_mode; - bool dual_accel; + bool auto_add_switch; };
#define HID_EVENT_FILTER_UUID "eeec56b3-4442-408f-a792-4edd4d758054" @@ -452,10 +470,8 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) * Some convertible have unreliable VGBS return which could cause incorrect * SW_TABLET_MODE report, in these cases we enable support when receiving * the first event instead of during driver setup. - * - * See dual_accel_detect.h for more info on the dual_accel check. */ - if (!priv->switches && !priv->dual_accel && (event == 0xcc || event == 0xcd)) { + if (!priv->switches && priv->auto_add_switch && (event == 0xcc || event == 0xcd)) { dev_info(&device->dev, "switch event received, enable switches supports\n"); err = intel_hid_switches_setup(device); if (err) @@ -596,7 +612,8 @@ static int intel_hid_probe(struct platform_device *device) return -ENOMEM; dev_set_drvdata(&device->dev, priv);
- priv->dual_accel = dual_accel_detect(); + /* See dual_accel_detect.h for more info on the dual_accel check. */ + priv->auto_add_switch = dmi_check_system(dmi_auto_add_switch) && !dual_accel_detect();
err = intel_hid_input_setup(device); if (err) {
From: Tobias Jakobi tjakobi@math.uni-bielefeld.de
[ Upstream commit 6f6aab1caf6c7fef46852aaab03f4e8250779e52 ]
Tested with a AMD Ryzen 7 5800X.
Signed-off-by: Tobias Jakobi tjakobi@math.uni-bielefeld.de Acked-by: Thomas Weißschuh thomas@weissschuh.net Link: https://lore.kernel.org/r/20210921100702.3838-1-tjakobi@math.uni-bielefeld.d... Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/gigabyte-wmi.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/gigabyte-wmi.c b/drivers/platform/x86/gigabyte-wmi.c index 7f3a03f937f6..d53634c8a6e0 100644 --- a/drivers/platform/x86/gigabyte-wmi.c +++ b/drivers/platform/x86/gigabyte-wmi.c @@ -144,6 +144,7 @@ static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = { DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE V2"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 GAMING X V2"), + DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550I AORUS PRO AX"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550M AORUS PRO-P"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550M DS3H"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("Z390 I AORUS PRO WIFI-CF"),
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 372d1f3e1bfede719864d0d1fbf3146b1e638c88 ]
The ext2_error() function syncs the filesystem so it sleeps. The caller is holding a spinlock so it's not allowed to sleep.
ext2_statfs() <- disables preempt -> ext2_count_free_blocks() -> ext2_get_group_desc()
Fix this by using WARN() to print an error message and a stack trace instead of using ext2_error().
Link: https://lore.kernel.org/r/20210921203233.GA16529@kili Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext2/balloc.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c index 1f3f4326bf3c..c17ccc19b938 100644 --- a/fs/ext2/balloc.c +++ b/fs/ext2/balloc.c @@ -48,10 +48,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, struct ext2_sb_info *sbi = EXT2_SB(sb);
if (block_group >= sbi->s_groups_count) { - ext2_error (sb, "ext2_get_group_desc", - "block_group >= groups_count - " - "block_group = %d, groups_count = %lu", - block_group, sbi->s_groups_count); + WARN(1, "block_group >= groups_count - " + "block_group = %d, groups_count = %lu", + block_group, sbi->s_groups_count);
return NULL; } @@ -59,10 +58,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, group_desc = block_group >> EXT2_DESC_PER_BLOCK_BITS(sb); offset = block_group & (EXT2_DESC_PER_BLOCK(sb) - 1); if (!sbi->s_group_desc[group_desc]) { - ext2_error (sb, "ext2_get_group_desc", - "Group descriptor not loaded - " - "block_group = %d, group_desc = %lu, desc = %lu", - block_group, group_desc, offset); + WARN(1, "Group descriptor not loaded - " + "block_group = %d, group_desc = %lu, desc = %lu", + block_group, group_desc, offset); return NULL; }
From: Philip Yang Philip.Yang@amd.com
[ Upstream commit 7d6687200a939176847090bbde5cb79a82792a2f ]
If svm migration init failed to create pgmap for device memory, set pgmap type to 0 to disable device SVM support capability.
Signed-off-by: Philip Yang Philip.Yang@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c index dab290a4d19d..165e0ebb619d 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c @@ -894,6 +894,9 @@ int svm_migrate_init(struct amdgpu_device *adev) r = devm_memremap_pages(adev->dev, pgmap); if (IS_ERR(r)) { pr_err("failed to register HMM device memory\n"); + + /* Disable SVM support capability */ + pgmap->type = 0; devm_release_mem_region(adev->dev, res->start, res->end - res->start + 1); return PTR_ERR(r);
From: Philip Yang Philip.Yang@amd.com
[ Upstream commit 197ae17722e989942b36e33e044787877f158574 ]
Device manager releases device-specific resources when a driver disconnects from a device, devm_memunmap_pages and devm_release_mem_region calls in svm_migrate_fini are redundant.
It causes below warning trace after patch "drm/amdgpu: Split amdgpu_device_fini into early and late", so remove function svm_migrate_fini.
BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718
WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795 devm_release_action+0x51/0x60 Call Trace: ? memunmap_pages+0x360/0x360 svm_migrate_fini+0x2d/0x60 [amdgpu] kgd2kfd_device_exit+0x23/0xa0 [amdgpu] amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu] amdgpu_device_fini_sw+0x45/0x290 [amdgpu] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] drm_dev_release+0x20/0x40 [drm] release_nodes+0x196/0x1e0 device_release_driver_internal+0x104/0x1d0 driver_detach+0x47/0x90 bus_remove_driver+0x7a/0xd0 pci_unregister_driver+0x3d/0x90 amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: Philip Yang Philip.Yang@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_device.c | 1 - drivers/gpu/drm/amd/amdkfd/kfd_migrate.c | 13 ++++--------- drivers/gpu/drm/amd/amdkfd/kfd_migrate.h | 5 ----- 3 files changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c index 9e52948d4992..0e5ebb384164 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c @@ -910,7 +910,6 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd, void kgd2kfd_device_exit(struct kfd_dev *kfd) { if (kfd->init_complete) { - svm_migrate_fini((struct amdgpu_device *)kfd->kgd); device_queue_manager_uninit(kfd->dqm); kfd_interrupt_exit(kfd); kfd_topology_remove_device(kfd); diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c index 165e0ebb619d..4a16e3c257b9 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.c @@ -891,6 +891,10 @@ int svm_migrate_init(struct amdgpu_device *adev) pgmap->ops = &svm_migrate_pgmap_ops; pgmap->owner = SVM_ADEV_PGMAP_OWNER(adev); pgmap->flags = MIGRATE_VMA_SELECT_DEVICE_PRIVATE; + + /* Device manager releases device-specific resources, memory region and + * pgmap when driver disconnects from device. + */ r = devm_memremap_pages(adev->dev, pgmap); if (IS_ERR(r)) { pr_err("failed to register HMM device memory\n"); @@ -911,12 +915,3 @@ int svm_migrate_init(struct amdgpu_device *adev)
return 0; } - -void svm_migrate_fini(struct amdgpu_device *adev) -{ - struct dev_pagemap *pgmap = &adev->kfd.dev->pgmap; - - devm_memunmap_pages(adev->dev, pgmap); - devm_release_mem_region(adev->dev, pgmap->range.start, - pgmap->range.end - pgmap->range.start + 1); -} diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h index 0de76b5d4973..2f5b3394c9ed 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_migrate.h @@ -47,7 +47,6 @@ unsigned long svm_migrate_addr_to_pfn(struct amdgpu_device *adev, unsigned long addr);
int svm_migrate_init(struct amdgpu_device *adev); -void svm_migrate_fini(struct amdgpu_device *adev);
#else
@@ -55,10 +54,6 @@ static inline int svm_migrate_init(struct amdgpu_device *adev) { return 0; } -static inline void svm_migrate_fini(struct amdgpu_device *adev) -{ - /* empty */ -}
#endif /* IS_ENABLED(CONFIG_HSA_AMD_SVM) */
From: Ming Lei ming.lei@redhat.com
[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]
After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up.
Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Ming Lei ming.lei@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/sd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index b8d55af763f9..134c7a8145ef 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3441,15 +3441,16 @@ static int sd_probe(struct device *dev) }
device_initialize(&sdkp->dev); - sdkp->dev.parent = dev; + sdkp->dev.parent = get_device(dev); sdkp->dev.class = &sd_disk_class; dev_set_name(&sdkp->dev, "%s", dev_name(dev));
error = device_add(&sdkp->dev); - if (error) - goto out_free_index; + if (error) { + put_device(&sdkp->dev); + goto out; + }
- get_device(dev); dev_set_drvdata(dev, sdkp);
gd->major = sd_major((index & 0xf0) >> 4);
From: James Smart jsmart2021@gmail.com
[ Upstream commit 450907424d9ebcc28fab42a065c3cddce49ee97d ]
Smatch checker reported the following error:
drivers/base/power/sysfs.c:833 dpm_sysfs_remove() warn: sleeping in atomic context
With a calling sequence of:
efct_lio_npiv_drop_nport() <- disables preempt -> fc_vport_terminate() -> device_del() -> dpm_sysfs_remove()
Issue is efct_lio_npiv_drop_nport() is making the fc_vport_terminate() call while holding a lock w/ ipl raised.
It is unnecessary to hold the lock over this call, shift where the lock is taken.
Link: https://lore.kernel.org/r/20210907165225.10821-1-jsmart2021@gmail.com Reported-by: Dan Carpenter dan.carpenter@oracle.com Co-developed-by: Ram Vegesna ram.vegesna@broadcom.com Signed-off-by: Ram Vegesna ram.vegesna@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/elx/efct/efct_lio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/elx/efct/efct_lio.c b/drivers/scsi/elx/efct/efct_lio.c index e0d798d6baee..f1d6fcfe12f0 100644 --- a/drivers/scsi/elx/efct/efct_lio.c +++ b/drivers/scsi/elx/efct/efct_lio.c @@ -880,11 +880,11 @@ efct_lio_npiv_drop_nport(struct se_wwn *wwn) struct efct *efct = lio_vport->efct; unsigned long flags = 0;
- spin_lock_irqsave(&efct->tgt_efct.efct_lio_lock, flags); - if (lio_vport->fc_vport) fc_vport_terminate(lio_vport->fc_vport);
+ spin_lock_irqsave(&efct->tgt_efct.efct_lio_lock, flags); + list_for_each_entry_safe(vport, next_vport, &efct->tgt_efct.vport_list, list_entry) { if (vport->lio_vport == lio_vport) {
From: Faizel K B faizel.kb@dicortech.com
[ Upstream commit f81c08f897adafd2ed43f86f00207ff929f0b2eb ]
testusb' application which uses 'usbtest' driver reports 'unknown speed' from the function 'find_testdev'. The variable 'entry->speed' was not updated from the application. The IOCTL mentioned in the FIXME comment can only report whether the connection is low speed or not. Speed is read using the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The call is implemented in the function 'handle_testdev' where the file descriptor was availble locally. Sample output is given below where 'high speed' is printed as the connected speed.
sudo ./testusb -a high speed /dev/bus/usb/001/011 0 /dev/bus/usb/001/011 test 0, 0.000015 secs /dev/bus/usb/001/011 test 1, 0.194208 secs /dev/bus/usb/001/011 test 2, 0.077289 secs /dev/bus/usb/001/011 test 3, 0.170604 secs /dev/bus/usb/001/011 test 4, 0.108335 secs /dev/bus/usb/001/011 test 5, 2.788076 secs /dev/bus/usb/001/011 test 6, 2.594610 secs /dev/bus/usb/001/011 test 7, 2.905459 secs /dev/bus/usb/001/011 test 8, 2.795193 secs /dev/bus/usb/001/011 test 9, 8.372651 secs /dev/bus/usb/001/011 test 10, 6.919731 secs /dev/bus/usb/001/011 test 11, 16.372687 secs /dev/bus/usb/001/011 test 12, 16.375233 secs /dev/bus/usb/001/011 test 13, 2.977457 secs /dev/bus/usb/001/011 test 14 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 17, 0.148826 secs /dev/bus/usb/001/011 test 18, 0.068718 secs /dev/bus/usb/001/011 test 19, 0.125992 secs /dev/bus/usb/001/011 test 20, 0.127477 secs /dev/bus/usb/001/011 test 21 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 24, 4.133763 secs /dev/bus/usb/001/011 test 27, 2.140066 secs /dev/bus/usb/001/011 test 28, 2.120713 secs /dev/bus/usb/001/011 test 29, 0.507762 secs
Signed-off-by: Faizel K B faizel.kb@dicortech.com Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/usb/testusb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c index ee8208b2f946..69c3ead25313 100644 --- a/tools/usb/testusb.c +++ b/tools/usb/testusb.c @@ -265,12 +265,6 @@ static int find_testdev(const char *name, const struct stat *sb, int flag) }
entry->ifnum = ifnum; - - /* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */ - - fprintf(stderr, "%s speed\t%s\t%u\n", - speed(entry->speed), entry->name, entry->ifnum); - entry->next = testdevs; testdevs = entry; return 0; @@ -299,6 +293,14 @@ static void *handle_testdev (void *arg) return 0; }
+ status = ioctl(fd, USBDEVFS_GET_SPEED, NULL); + if (status < 0) + fprintf(stderr, "USBDEVFS_GET_SPEED failed %d\n", status); + else + dev->speed = status; + fprintf(stderr, "%s speed\t%s\t%u\n", + speed(dev->speed), dev->name, dev->ifnum); + restart: for (i = 0; i < TEST_CASES; i++) { if (dev->test != -1 && dev->test != i)
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit 856e6e8e0f9300befa87dde09edb578555c99a82 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/hcd.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 2a7828971d05..a215ec9e172e 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5191,6 +5191,10 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) hcd->has_tt = 1;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -EINVAL; + goto error1; + } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res);
From: Omer Shpigelman oshpigelman@habana.ai
[ Upstream commit 3e08f157c2587fc7ada93abed41aae19bcbf8a6b ]
Due to FLR scenario when running inside a VM, we must not use indirect MSI because it might cause some issues on VM destroy. In a VM we use single MSI mode in contrary to multi MSI mode which is used in bare-metal. Hence direct MSI should be used in single MSI mode only.
Signed-off-by: Omer Shpigelman oshpigelman@habana.ai Reviewed-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/habanalabs/gaudi/gaudi.c | 9 ++++++--- .../misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h | 2 ++ 2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 409f05c962f2..8a9c4f0f37f9 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -5620,6 +5620,7 @@ static void gaudi_add_end_of_cb_packets(struct hl_device *hdev, { struct gaudi_device *gaudi = hdev->asic_specific; struct packet_msg_prot *cq_pkt; + u64 msi_addr; u32 tmp;
cq_pkt = kernel_address + len - (sizeof(struct packet_msg_prot) * 2); @@ -5641,10 +5642,12 @@ static void gaudi_add_end_of_cb_packets(struct hl_device *hdev, cq_pkt->ctl = cpu_to_le32(tmp); cq_pkt->value = cpu_to_le32(1);
- if (!gaudi->multi_msi_mode) - msi_vec = 0; + if (gaudi->multi_msi_mode) + msi_addr = mmPCIE_MSI_INTR_0 + msi_vec * 4; + else + msi_addr = mmPCIE_CORE_MSI_REQ;
- cq_pkt->addr = cpu_to_le64(CFG_BASE + mmPCIE_MSI_INTR_0 + msi_vec * 4); + cq_pkt->addr = cpu_to_le64(CFG_BASE + msi_addr); }
static void gaudi_update_eq_ci(struct hl_device *hdev, u32 val) diff --git a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h index 5bb54b34a8ae..907644202b0c 100644 --- a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h +++ b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h @@ -305,6 +305,8 @@ #define mmPCIE_AUX_FLR_CTRL 0xC07394 #define mmPCIE_AUX_DBI 0xC07490
+#define mmPCIE_CORE_MSI_REQ 0xC04100 + #define mmPSOC_PCI_PLL_NR 0xC72100 #define mmSRAM_W_PLL_NR 0x4C8100 #define mmPSOC_HBM_PLL_NR 0xC74100
From: Ofir Bitton obitton@habana.ai
[ Upstream commit d09ff62c820b5950ab9958e77620a8498efe9386 ]
As collective wait operation is required only when NIC ports are available, we disable the option to submit a CS in case all the ports are disabled, which is the current situation in the upstream driver.
Signed-off-by: Ofir Bitton obitton@habana.ai Reviewed-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/habanalabs/common/command_submission.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c index 80c60fb41bbc..d249101106de 100644 --- a/drivers/misc/habanalabs/common/command_submission.c +++ b/drivers/misc/habanalabs/common/command_submission.c @@ -1727,6 +1727,15 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type, goto free_cs_chunk_array; }
+ if (!hdev->nic_ports_mask) { + atomic64_inc(&ctx->cs_counters.validation_drop_cnt); + atomic64_inc(&cntr->validation_drop_cnt); + dev_err(hdev->dev, + "Collective operations not supported when NIC ports are disabled"); + rc = -EINVAL; + goto free_cs_chunk_array; + } + collective_engine_id = chunk->collective_engine_id; }
From: Oded Gabbay ogabbay@kernel.org
[ Upstream commit 0a5ff77bf0a94468d541735f919a633f167787e9 ]
Couple of fixes to the LBW RR configuration:
1. Add missing configuration of the SM RR registers in the DMA_IF. 2. Remove HBW range that doesn't belong. 3. Add entire gap + DBG area, from end of TPC7 to end of entire DBG space.
Signed-off-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../misc/habanalabs/gaudi/gaudi_security.c | 115 ++++++++++-------- 1 file changed, 67 insertions(+), 48 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_security.c b/drivers/misc/habanalabs/gaudi/gaudi_security.c index 0d3240f1f7d7..2b8bafda41bc 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi_security.c +++ b/drivers/misc/habanalabs/gaudi/gaudi_security.c @@ -8,16 +8,21 @@ #include "gaudiP.h" #include "../include/gaudi/asic_reg/gaudi_regs.h"
-#define GAUDI_NUMBER_OF_RR_REGS 24 -#define GAUDI_NUMBER_OF_LBW_RANGES 12 +#define GAUDI_NUMBER_OF_LBW_RR_REGS 28 +#define GAUDI_NUMBER_OF_HBW_RR_REGS 24 +#define GAUDI_NUMBER_OF_LBW_RANGES 10
-static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_HIT_WPROT, mmDMA_IF_W_S_DMA0_HIT_WPROT, mmDMA_IF_W_S_DMA1_HIT_WPROT, + mmDMA_IF_E_S_SOB_HIT_WPROT, mmDMA_IF_E_S_DMA0_HIT_WPROT, mmDMA_IF_E_S_DMA1_HIT_WPROT, + mmDMA_IF_W_N_SOB_HIT_WPROT, mmDMA_IF_W_N_DMA0_HIT_WPROT, mmDMA_IF_W_N_DMA1_HIT_WPROT, + mmDMA_IF_E_N_SOB_HIT_WPROT, mmDMA_IF_E_N_DMA0_HIT_WPROT, mmDMA_IF_E_N_DMA1_HIT_WPROT, mmSIF_RTR_0_LBW_RANGE_PROT_HIT_AW, @@ -38,13 +43,17 @@ static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_HIT_AW, };
-static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_HIT_RPROT, mmDMA_IF_W_S_DMA0_HIT_RPROT, mmDMA_IF_W_S_DMA1_HIT_RPROT, + mmDMA_IF_E_S_SOB_HIT_RPROT, mmDMA_IF_E_S_DMA0_HIT_RPROT, mmDMA_IF_E_S_DMA1_HIT_RPROT, + mmDMA_IF_W_N_SOB_HIT_RPROT, mmDMA_IF_W_N_DMA0_HIT_RPROT, mmDMA_IF_W_N_DMA1_HIT_RPROT, + mmDMA_IF_E_N_SOB_HIT_RPROT, mmDMA_IF_E_N_DMA0_HIT_RPROT, mmDMA_IF_E_N_DMA1_HIT_RPROT, mmSIF_RTR_0_LBW_RANGE_PROT_HIT_AR, @@ -65,13 +74,17 @@ static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_HIT_AR, };
-static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MIN_WPROT_0, mmDMA_IF_W_S_DMA0_MIN_WPROT_0, mmDMA_IF_W_S_DMA1_MIN_WPROT_0, + mmDMA_IF_E_S_SOB_MIN_WPROT_0, mmDMA_IF_E_S_DMA0_MIN_WPROT_0, mmDMA_IF_E_S_DMA1_MIN_WPROT_0, + mmDMA_IF_W_N_SOB_MIN_WPROT_0, mmDMA_IF_W_N_DMA0_MIN_WPROT_0, mmDMA_IF_W_N_DMA1_MIN_WPROT_0, + mmDMA_IF_E_N_SOB_MIN_WPROT_0, mmDMA_IF_E_N_DMA0_MIN_WPROT_0, mmDMA_IF_E_N_DMA1_MIN_WPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MIN_AW_0, @@ -92,13 +105,17 @@ static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MIN_AW_0, };
-static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MAX_WPROT_0, mmDMA_IF_W_S_DMA0_MAX_WPROT_0, mmDMA_IF_W_S_DMA1_MAX_WPROT_0, + mmDMA_IF_E_S_SOB_MAX_WPROT_0, mmDMA_IF_E_S_DMA0_MAX_WPROT_0, mmDMA_IF_E_S_DMA1_MAX_WPROT_0, + mmDMA_IF_W_N_SOB_MAX_WPROT_0, mmDMA_IF_W_N_DMA0_MAX_WPROT_0, mmDMA_IF_W_N_DMA1_MAX_WPROT_0, + mmDMA_IF_E_N_SOB_MAX_WPROT_0, mmDMA_IF_E_N_DMA0_MAX_WPROT_0, mmDMA_IF_E_N_DMA1_MAX_WPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MAX_AW_0, @@ -119,13 +136,17 @@ static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MAX_AW_0, };
-static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MIN_RPROT_0, mmDMA_IF_W_S_DMA0_MIN_RPROT_0, mmDMA_IF_W_S_DMA1_MIN_RPROT_0, + mmDMA_IF_E_S_SOB_MIN_RPROT_0, mmDMA_IF_E_S_DMA0_MIN_RPROT_0, mmDMA_IF_E_S_DMA1_MIN_RPROT_0, + mmDMA_IF_W_N_SOB_MIN_RPROT_0, mmDMA_IF_W_N_DMA0_MIN_RPROT_0, mmDMA_IF_W_N_DMA1_MIN_RPROT_0, + mmDMA_IF_E_N_SOB_MIN_RPROT_0, mmDMA_IF_E_N_DMA0_MIN_RPROT_0, mmDMA_IF_E_N_DMA1_MIN_RPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MIN_AR_0, @@ -146,13 +167,17 @@ static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MIN_AR_0, };
-static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MAX_RPROT_0, mmDMA_IF_W_S_DMA0_MAX_RPROT_0, mmDMA_IF_W_S_DMA1_MAX_RPROT_0, + mmDMA_IF_E_S_SOB_MAX_RPROT_0, mmDMA_IF_E_S_DMA0_MAX_RPROT_0, mmDMA_IF_E_S_DMA1_MAX_RPROT_0, + mmDMA_IF_W_N_SOB_MAX_RPROT_0, mmDMA_IF_W_N_DMA0_MAX_RPROT_0, mmDMA_IF_W_N_DMA1_MAX_RPROT_0, + mmDMA_IF_E_N_SOB_MAX_RPROT_0, mmDMA_IF_E_N_DMA0_MAX_RPROT_0, mmDMA_IF_E_N_DMA1_MAX_RPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MAX_AR_0, @@ -173,7 +198,7 @@ static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MAX_AR_0, };
-static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_HIT_AW, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_HIT_AW, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_HIT_AW, @@ -200,7 +225,7 @@ static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_HIT_AW };
-static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_HIT_AR, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_HIT_AR, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_HIT_AR, @@ -227,7 +252,7 @@ static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_HIT_AR };
-static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_LOW_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AW_0, @@ -254,7 +279,7 @@ static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_LOW_AW_0 };
-static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_HIGH_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AW_0, @@ -281,7 +306,7 @@ static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_HIGH_AW_0 };
-static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_LOW_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AW_0, @@ -308,7 +333,7 @@ static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_LOW_AW_0 };
-static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_HIGH_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AW_0, @@ -335,7 +360,7 @@ static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_HIGH_AW_0 };
-static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_LOW_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AR_0, @@ -362,7 +387,7 @@ static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_LOW_AR_0 };
-static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_HIGH_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AR_0, @@ -389,7 +414,7 @@ static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_HIGH_AR_0 };
-static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_LOW_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AR_0, @@ -416,7 +441,7 @@ static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_LOW_AR_0 };
-static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_HIGH_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AR_0, @@ -12841,50 +12866,44 @@ static void gaudi_init_range_registers_lbw(struct hl_device *hdev) u32 lbw_rng_end[GAUDI_NUMBER_OF_LBW_RANGES]; int i, j;
- lbw_rng_start[0] = (0xFBFE0000 & 0x3FFFFFF) - 1; - lbw_rng_end[0] = (0xFBFFF000 & 0x3FFFFFF) + 1; + lbw_rng_start[0] = (0xFC0E8000 & 0x3FFFFFF) - 1; /* 0x000E7FFF */ + lbw_rng_end[0] = (0xFC11FFFF & 0x3FFFFFF) + 1; /* 0x00120000 */
- lbw_rng_start[1] = (0xFC0E8000 & 0x3FFFFFF) - 1; - lbw_rng_end[1] = (0xFC120000 & 0x3FFFFFF) + 1; + lbw_rng_start[1] = (0xFC1E8000 & 0x3FFFFFF) - 1; /* 0x001E7FFF */ + lbw_rng_end[1] = (0xFC48FFFF & 0x3FFFFFF) + 1; /* 0x00490000 */
- lbw_rng_start[2] = (0xFC1E8000 & 0x3FFFFFF) - 1; - lbw_rng_end[2] = (0xFC48FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[2] = (0xFC600000 & 0x3FFFFFF) - 1; /* 0x005FFFFF */ + lbw_rng_end[2] = (0xFCC48FFF & 0x3FFFFFF) + 1; /* 0x00C49000 */
- lbw_rng_start[3] = (0xFC600000 & 0x3FFFFFF) - 1; - lbw_rng_end[3] = (0xFCC48FFF & 0x3FFFFFF) + 1; + lbw_rng_start[3] = (0xFCC4A000 & 0x3FFFFFF) - 1; /* 0x00C49FFF */ + lbw_rng_end[3] = (0xFCCDFFFF & 0x3FFFFFF) + 1; /* 0x00CE0000 */
- lbw_rng_start[4] = (0xFCC4A000 & 0x3FFFFFF) - 1; - lbw_rng_end[4] = (0xFCCDFFFF & 0x3FFFFFF) + 1; + lbw_rng_start[4] = (0xFCCE4000 & 0x3FFFFFF) - 1; /* 0x00CE3FFF */ + lbw_rng_end[4] = (0xFCD1FFFF & 0x3FFFFFF) + 1; /* 0x00D20000 */
- lbw_rng_start[5] = (0xFCCE4000 & 0x3FFFFFF) - 1; - lbw_rng_end[5] = (0xFCD1FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[5] = (0xFCD24000 & 0x3FFFFFF) - 1; /* 0x00D23FFF */ + lbw_rng_end[5] = (0xFCD5FFFF & 0x3FFFFFF) + 1; /* 0x00D60000 */
- lbw_rng_start[6] = (0xFCD24000 & 0x3FFFFFF) - 1; - lbw_rng_end[6] = (0xFCD5FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[6] = (0xFCD64000 & 0x3FFFFFF) - 1; /* 0x00D63FFF */ + lbw_rng_end[6] = (0xFCD9FFFF & 0x3FFFFFF) + 1; /* 0x00DA0000 */
- lbw_rng_start[7] = (0xFCD64000 & 0x3FFFFFF) - 1; - lbw_rng_end[7] = (0xFCD9FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[7] = (0xFCDA4000 & 0x3FFFFFF) - 1; /* 0x00DA3FFF */ + lbw_rng_end[7] = (0xFCDDFFFF & 0x3FFFFFF) + 1; /* 0x00DE0000 */
- lbw_rng_start[8] = (0xFCDA4000 & 0x3FFFFFF) - 1; - lbw_rng_end[8] = (0xFCDDFFFF & 0x3FFFFFF) + 1; + lbw_rng_start[8] = (0xFCDE4000 & 0x3FFFFFF) - 1; /* 0x00DE3FFF */ + lbw_rng_end[8] = (0xFCE05FFF & 0x3FFFFFF) + 1; /* 0x00E06000 */
- lbw_rng_start[9] = (0xFCDE4000 & 0x3FFFFFF) - 1; - lbw_rng_end[9] = (0xFCE05FFF & 0x3FFFFFF) + 1; + lbw_rng_start[9] = (0xFCFC9000 & 0x3FFFFFF) - 1; /* 0x00FC8FFF */ + lbw_rng_end[9] = (0xFFFFFFFE & 0x3FFFFFF) + 1; /* 0x03FFFFFF */
- lbw_rng_start[10] = (0xFEC43000 & 0x3FFFFFF) - 1; - lbw_rng_end[10] = (0xFEC43FFF & 0x3FFFFFF) + 1; - - lbw_rng_start[11] = (0xFE484000 & 0x3FFFFFF) - 1; - lbw_rng_end[11] = (0xFE484FFF & 0x3FFFFFF) + 1; - - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_LBW_RR_REGS ; i++) { WREG32(gaudi_rr_lbw_hit_aw_regs[i], (1 << GAUDI_NUMBER_OF_LBW_RANGES) - 1); WREG32(gaudi_rr_lbw_hit_ar_regs[i], (1 << GAUDI_NUMBER_OF_LBW_RANGES) - 1); }
- for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) + for (i = 0 ; i < GAUDI_NUMBER_OF_LBW_RR_REGS ; i++) for (j = 0 ; j < GAUDI_NUMBER_OF_LBW_RANGES ; j++) { WREG32(gaudi_rr_lbw_min_aw_regs[i] + (j << 2), lbw_rng_start[j]); @@ -12931,12 +12950,12 @@ static void gaudi_init_range_registers_hbw(struct hl_device *hdev) * 6th range is the host */
- for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_HBW_RR_REGS ; i++) { WREG32(gaudi_rr_hbw_hit_aw_regs[i], 0x1F); WREG32(gaudi_rr_hbw_hit_ar_regs[i], 0x1D); }
- for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_HBW_RR_REGS ; i++) { WREG32(gaudi_rr_hbw_base_low_aw_regs[i], dram_addr_lo); WREG32(gaudi_rr_hbw_base_low_ar_regs[i], dram_addr_lo);
From: Li Zhijian lizhijian@cn.fujitsu.com
[ Upstream commit 8914a7a247e065438a0ec86a58c1c359223d2c9e ]
LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’?
Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors.
Here we mark target khdr as NOTPARALLEL to make it be always built first.
CC: Philip Li philip.li@intel.com Reported-by: kernel test robot lkp@intel.com Signed-off-by: Li Zhijian lizhijian@cn.fujitsu.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/lib.mk | 1 + 1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index fa2ac0e56b43..fe7ee2b0f29c 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -48,6 +48,7 @@ ARCH ?= $(SUBARCH) # When local build is done, headers are installed in the default # INSTALL_HDR_PATH usr/include. .PHONY: khdr +.NOTPARALLEL: khdr: ifndef KSFT_KHDR_INSTALL_DONE ifeq (1,$(DEFAULT_INSTALL_HDR_PATH))
From: Shuah Khan skhan@linuxfoundation.org
[ Upstream commit 39a71f712d8a13728febd8f3cb3f6db7e1fa7221 ]
Fix get_warnings_count() to check fscanf() return value to get rid of the following warning:
x86_64/mmio_warning_test.c: In function ‘get_warnings_count’: x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 85 | fscanf(f, "%d", &warnings); | ^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan skhan@linuxfoundation.org Acked-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/kvm/x86_64/mmio_warning_test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c index e6480fd5c4bd..8039e1eff938 100644 --- a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c +++ b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c @@ -82,7 +82,8 @@ int get_warnings_count(void) FILE *f;
f = popen("dmesg | grep "WARNING:" | wc -l", "r"); - fscanf(f, "%d", &warnings); + if (fscanf(f, "%d", &warnings) < 1) + warnings = 0; fclose(f);
return warnings;
From: Shuah Khan skhan@linuxfoundation.org
[ Upstream commit 3a4f0cc693cd3d80e66a255f0bff0e2c0461eef1 ]
Fix get_trans_hugepagesz() to check fscanf() return value to get rid of the following warning:
lib/test_util.c: In function ‘get_trans_hugepagesz’: lib/test_util.c:138:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 138 | fscanf(f, "%ld", &size); | ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan skhan@linuxfoundation.org Acked-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/kvm/lib/test_util.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index af1031fed97f..938cd423643e 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -129,13 +129,16 @@ size_t get_trans_hugepagesz(void) { size_t size; FILE *f; + int ret;
TEST_ASSERT(thp_configured(), "THP is not configured in host kernel");
f = fopen("/sys/kernel/mm/transparent_hugepage/hpage_pmd_size", "r"); TEST_ASSERT(f != NULL, "Error in opening transparent_hugepage/hpage_pmd_size");
- fscanf(f, "%ld", &size); + ret = fscanf(f, "%ld", &size); + ret = fscanf(f, "%ld", &size); + TEST_ASSERT(ret < 1, "Error reading transparent_hugepage/hpage_pmd_size"); fclose(f);
return size;
From: Shuah Khan skhan@linuxfoundation.org
[ Upstream commit 20175d5eac5bb94a7a3719ef275337fc9abf26ac ]
get_run_delay() is defined static in xen_shinfo_test and steal_time test. Move it to lib and remove code duplication.
Signed-off-by: Shuah Khan skhan@linuxfoundation.org Acked-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/kvm/include/test_util.h | 1 + tools/testing/selftests/kvm/lib/test_util.c | 15 +++++++++++++++ tools/testing/selftests/kvm/steal_time.c | 15 --------------- .../selftests/kvm/x86_64/xen_shinfo_test.c | 15 --------------- 4 files changed, 16 insertions(+), 30 deletions(-)
diff --git a/tools/testing/selftests/kvm/include/test_util.h b/tools/testing/selftests/kvm/include/test_util.h index d79be15dd3d2..c7409b9b4e5b 100644 --- a/tools/testing/selftests/kvm/include/test_util.h +++ b/tools/testing/selftests/kvm/include/test_util.h @@ -102,6 +102,7 @@ const struct vm_mem_backing_src_alias *vm_mem_backing_src_alias(uint32_t i); size_t get_backing_src_pagesz(uint32_t i); void backing_src_help(void); enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name); +long get_run_delay(void);
/* * Whether or not the given source type is shared memory (as opposed to diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index 938cd423643e..f80dd38a38b2 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -11,6 +11,7 @@ #include <stdlib.h> #include <time.h> #include <sys/stat.h> +#include <sys/syscall.h> #include <linux/mman.h> #include "linux/kernel.h"
@@ -303,3 +304,17 @@ enum vm_mem_backing_src_type parse_backing_src_type(const char *type_name) TEST_FAIL("Unknown backing src type: %s", type_name); return -1; } + +long get_run_delay(void) +{ + char path[64]; + long val[2]; + FILE *fp; + + sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); + fp = fopen(path, "r"); + fscanf(fp, "%ld %ld ", &val[0], &val[1]); + fclose(fp); + + return val[1]; +} diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index ecec30865a74..51fe95a5c36a 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -10,7 +10,6 @@ #include <sched.h> #include <pthread.h> #include <linux/kernel.h> -#include <sys/syscall.h> #include <asm/kvm.h> #include <asm/kvm_para.h>
@@ -217,20 +216,6 @@ static void steal_time_dump(struct kvm_vm *vm, uint32_t vcpuid)
#endif
-static long get_run_delay(void) -{ - char path[64]; - long val[2]; - FILE *fp; - - sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); - fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); - fclose(fp); - - return val[1]; -} - static void *do_steal_time(void *arg) { struct timespec ts, stop; diff --git a/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c b/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c index 117bf49a3d79..eda0d2a51224 100644 --- a/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c +++ b/tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c @@ -14,7 +14,6 @@ #include <stdint.h> #include <time.h> #include <sched.h> -#include <sys/syscall.h>
#define VCPU_ID 5
@@ -98,20 +97,6 @@ static void guest_code(void) GUEST_DONE(); }
-static long get_run_delay(void) -{ - char path[64]; - long val[2]; - FILE *fp; - - sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); - fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); - fclose(fp); - - return val[1]; -} - static int cmp_timespec(struct timespec *a, struct timespec *b) { if (a->tv_sec > b->tv_sec)
From: Shuah Khan skhan@linuxfoundation.org
[ Upstream commit f5013d412a43662b63f3d5f3a804d63213acd471 ]
Fix get_run_delay() to check fscanf() return value to get rid of the following warning. When fscanf() fails return MIN_RUN_DELAY_NS from get_run_delay(). Move MIN_RUN_DELAY_NS from steal_time.c to test_util.h so get_run_delay() and steal_time.c can use it.
lib/test_util.c: In function ‘get_run_delay’: lib/test_util.c:316:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 316 | fscanf(fp, "%ld %ld ", &val[0], &val[1]); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan skhan@linuxfoundation.org Acked-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/kvm/include/test_util.h | 2 ++ tools/testing/selftests/kvm/lib/test_util.c | 4 +++- tools/testing/selftests/kvm/steal_time.c | 1 - 3 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/kvm/include/test_util.h b/tools/testing/selftests/kvm/include/test_util.h index c7409b9b4e5b..451fed5ce8e7 100644 --- a/tools/testing/selftests/kvm/include/test_util.h +++ b/tools/testing/selftests/kvm/include/test_util.h @@ -95,6 +95,8 @@ struct vm_mem_backing_src_alias { uint32_t flag; };
+#define MIN_RUN_DELAY_NS 200000UL + bool thp_configured(void); size_t get_trans_hugepagesz(void); size_t get_def_hugetlb_pagesz(void); diff --git a/tools/testing/selftests/kvm/lib/test_util.c b/tools/testing/selftests/kvm/lib/test_util.c index f80dd38a38b2..a9107bfae402 100644 --- a/tools/testing/selftests/kvm/lib/test_util.c +++ b/tools/testing/selftests/kvm/lib/test_util.c @@ -313,7 +313,9 @@ long get_run_delay(void)
sprintf(path, "/proc/%ld/schedstat", syscall(SYS_gettid)); fp = fopen(path, "r"); - fscanf(fp, "%ld %ld ", &val[0], &val[1]); + /* Return MIN_RUN_DELAY_NS upon failure just to be safe */ + if (fscanf(fp, "%ld %ld ", &val[0], &val[1]) < 2) + val[1] = MIN_RUN_DELAY_NS; fclose(fp);
return val[1]; diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index 51fe95a5c36a..2172d65b85e4 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -19,7 +19,6 @@
#define NR_VCPUS 4 #define ST_GPA_BASE (1 << 30) -#define MIN_RUN_DELAY_NS 200000UL
static void *st_gva[NR_VCPUS]; static uint64_t guest_stolen_time[NR_VCPUS];
From: Jan Beulich jbeulich@suse.com
[ Upstream commit f28347cc66395e96712f5c2db0a302ee75bafce6 ]
While working on XSA-361 and its follow-ups, I failed to spot another place where the kernel mapping part of an operation was not treated the same as the user space part. Detect and propagate errors and add a 2nd pr_debug().
Signed-off-by: Jan Beulich jbeulich@suse.com Reviewed-by: Juergen Gross jgross@suse.com Link: https://lore.kernel.org/r/c2513395-74dc-aea3-9192-fd265aa44e35@suse.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/gntdev.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index a3e7be96527d..23fd09a9bbaf 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -396,6 +396,14 @@ static int __unmap_grant_pages(struct gntdev_grant_map *map, int offset, map->unmap_ops[offset+i].handle, map->unmap_ops[offset+i].status); map->unmap_ops[offset+i].handle = INVALID_GRANT_HANDLE; + if (use_ptemod) { + if (map->kunmap_ops[offset+i].status) + err = -EINVAL; + pr_debug("kunmap handle=%u st=%d\n", + map->kunmap_ops[offset+i].handle, + map->kunmap_ops[offset+i].status); + map->kunmap_ops[offset+i].handle = INVALID_GRANT_HANDLE; + } } return err; }
From: Jan Beulich jbeulich@suse.com
[ Upstream commit 9074c79b62b6e0d91d7f716c6e4e9968eaf9e043 ]
While the hypervisor hasn't been enforcing this, we would still better avoid issuing requests with GFNs not aligned to the requested order. Instead of altering the value also in the call to panic(), drop it there for being static and hence easy to determine without being part of the panic message.
Signed-off-by: Jan Beulich jbeulich@suse.com Reviewed-by: Stefano Stabellini sstabellini@kernel.org Link: https://lore.kernel.org/r/7b3998e3-1233-4e5a-89ec-d740e77eb166@suse.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/swiotlb-xen.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index dbb18dc956f3..de4f55154d49 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -232,10 +232,11 @@ void __init xen_swiotlb_init_early(void) /* * Get IO TLB memory from any location. */ - start = memblock_alloc(PAGE_ALIGN(bytes), PAGE_SIZE); + start = memblock_alloc(PAGE_ALIGN(bytes), + IO_TLB_SEGSIZE << IO_TLB_SHIFT); if (!start) - panic("%s: Failed to allocate %lu bytes align=0x%lx\n", - __func__, PAGE_ALIGN(bytes), PAGE_SIZE); + panic("%s: Failed to allocate %lu bytes\n", + __func__, PAGE_ALIGN(bytes));
/* * And replace that memory with pages under 4GB.
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 555f66d0f8a38537456acc77043d0e4469fcbe8e ]
In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first.
If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress.
Signed-off-by: Daniel Wagner dwagner@suse.de Reviewed-by: Ming Lei ming.lei@redhat.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: James Smart jsmart2021@gmail.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index b08a61ca283f..b5d9a5507de5 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2951,14 +2951,6 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) if (ctrl->ctrl.queue_count == 1) return 0;
- ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); - if (ret) - goto out_free_io_queues; - - ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1); - if (ret) - goto out_delete_hw_queues; - if (prior_ioq_cnt != nr_io_queues) { dev_info(ctrl->ctrl.device, "reconnect: revising io queue count from %d to %d\n", @@ -2968,6 +2960,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) nvme_unfreeze(&ctrl->ctrl); }
+ ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); + if (ret) + goto out_free_io_queues; + + ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1); + if (ret) + goto out_delete_hw_queues; + return 0;
out_delete_hw_queues:
From: James Smart jsmart2021@gmail.com
[ Upstream commit e5445dae29d25d7b03e0a10d3d4277a1d0c8119b ]
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue.
This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc.
Signed-off-by: James Smart jsmart2021@gmail.com Tested-by: Daniel Wagner dwagner@suse.de Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Daniel Wagner dwagner@suse.de Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fc.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index b5d9a5507de5..6ebe68396712 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2487,6 +2487,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) */ if (ctrl->ctrl.queue_count > 1) { nvme_stop_queues(&ctrl->ctrl); + nvme_sync_io_queues(&ctrl->ctrl); blk_mq_tagset_busy_iter(&ctrl->tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->tag_set); @@ -2510,6 +2511,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) * clean up the admin queue. Same thing as above. */ blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + blk_sync_queue(ctrl->ctrl.admin_q); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set);
From: Ansuel Smith ansuelsmth@gmail.com
[ Upstream commit cf96921876dcee4d6ac07b9de470368a075ba9ad ]
Some devices can have some thermal sensors disabled from the factory. The current two irq handler functions check all the sensor by default and the check if the sensor was actually registered is wrong. The tzd is actually never set if the registration fails hence the IS_ERR check is wrong.
Signed-off-by: Ansuel Smith ansuelsmth@gmail.com Reviewed-by: Matthias Kaehlcke mka@chromium.org Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Link: https://lore.kernel.org/r/20210907212543.20220-1-ansuelsmth@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/qcom/tsens.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 4c7ebd1d3f9c..b1162e566a70 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -417,7 +417,7 @@ static irqreturn_t tsens_critical_irq_thread(int irq, void *data) const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id;
- if (IS_ERR(s->tzd)) + if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue; @@ -467,7 +467,7 @@ static irqreturn_t tsens_irq_thread(int irq, void *data) const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id;
- if (IS_ERR(s->tzd)) + if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue;
From: Wen Xiong wenxiong@linux.ibm.com
[ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ]
Setting SCSI logging level with error=3, we saw some errors from enclosues:
[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427778] ses 0:0:9:0: Power-on or device reset occurred [108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current] [108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred [108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1 [108017.427804] ses 0:0:9:0: Failed to bind enclosure -19 [108017.427895] ses 0:0:10:0: Attached Enclosure device [108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13
Retry if the Send/Receive Diagnostic commands complete with a transient error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).
Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.i... Reviewed-by: Brian King brking@linux.ibm.com Reviewed-by: James Bottomley jejb@linux.ibm.com Signed-off-by: Wen Xiong wenxiong@linux.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ses.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index c2afba2a5414..43e682297fd5 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -87,9 +87,16 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, 0 }; unsigned char recv_page_code; + unsigned int retries = SES_RETRIES; + struct scsi_sense_hdr sshdr; + + do { + ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (ret > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
- ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (unlikely(ret)) return ret;
@@ -121,9 +128,16 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code, bufflen & 0xff, 0 }; + struct scsi_sense_hdr sshdr; + unsigned int retries = SES_RETRIES; + + do { + result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (result > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
- result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (result) sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", result);
From: Marc Zyngier maz@kernel.org
[ Upstream commit b78f26926b17cc289e4f16b63363abe0aa2e8efc ]
Geert reported that the GIC driver locks up on a Renesas system since 005c34ae4b44f085 ("irqchip/gic: Atomically update affinity") fixed the driver to use writeb_relaxed() instead of writel_relaxed().
As it turns out, the interconnect used on this system mandates 32bit wide accesses for all MMIO transactions, even if the GIC architecture specifically mandates for some registers to be byte accessible. Gahhh...
Work around the issue by crudly detecting the offending system, and falling back to an inefficient RMW+lock implementation.
Reported-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/CAMuHMdV+Ev47K5NO8XHsanSq5YRMCHn2gWAQyV-q2LpJVy9Hi... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-gic.c | 52 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index d329ec3d64d8..5f22c9d65e57 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -107,6 +107,8 @@ static DEFINE_RAW_SPINLOCK(cpu_map_lock);
#endif
+static DEFINE_STATIC_KEY_FALSE(needs_rmw_access); + /* * The GIC mapping of CPU interfaces does not necessarily match * the logical CPU numbering. Let's use a mapping as returned @@ -774,6 +776,25 @@ static int gic_pm_init(struct gic_chip_data *gic) #endif
#ifdef CONFIG_SMP +static void rmw_writeb(u8 bval, void __iomem *addr) +{ + static DEFINE_RAW_SPINLOCK(rmw_lock); + unsigned long offset = (unsigned long)addr & 3UL; + unsigned long shift = offset * 8; + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&rmw_lock, flags); + + addr -= offset; + val = readl_relaxed(addr); + val &= ~GENMASK(shift + 7, shift); + val |= bval << shift; + writel_relaxed(val, addr); + + raw_spin_unlock_irqrestore(&rmw_lock, flags); +} + static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { @@ -788,7 +809,10 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL;
- writeb_relaxed(gic_cpu_map[cpu], reg); + if (static_branch_unlikely(&needs_rmw_access)) + rmw_writeb(gic_cpu_map[cpu], reg); + else + writeb_relaxed(gic_cpu_map[cpu], reg); irq_data_update_effective_affinity(d, cpumask_of(cpu));
return IRQ_SET_MASK_OK_DONE; @@ -1375,6 +1399,30 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base) return true; }
+static bool gic_enable_rmw_access(void *data) +{ + /* + * The EMEV2 class of machines has a broken interconnect, and + * locks up on accesses that are less than 32bit. So far, only + * the affinity setting requires it. + */ + if (of_machine_is_compatible("renesas,emev2")) { + static_branch_enable(&needs_rmw_access); + return true; + } + + return false; +} + +static const struct gic_quirk gic_quirks[] = { + { + .desc = "broken byte access", + .compatible = "arm,pl390", + .init = gic_enable_rmw_access, + }, + { }, +}; + static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node) { if (!gic || !node) @@ -1391,6 +1439,8 @@ static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node) if (of_property_read_u32(node, "cpu-offset", &gic->percpu_offset)) gic->percpu_offset = 0;
+ gic_enable_of_quirks(node, gic_quirks, gic); + return 0;
error:
From: Steve French stfrench@microsoft.com
[ Upstream commit b06d893ef2492245d0319b4136edb4c346b687a3 ]
Address warning:
fs/smbfs_client/smb2pdu.c:2425 create_sd_buf() warn: struct type mismatch 'smb3_acl vs cifs_acl'
Pointed out by Dan Carpenter via smatch code analysis tool
Reported-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/smb2pdu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index b6d2e3591927..e1739d0135b4 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2398,7 +2398,7 @@ create_sd_buf(umode_t mode, bool set_owner, unsigned int *len) buf->sd.OffsetDacl = cpu_to_le32(ptr - (__u8 *)&buf->sd); /* Ship the ACL for now. we will copy it into buf later. */ aclptr = ptr; - ptr += sizeof(struct cifs_acl); + ptr += sizeof(struct smb3_acl);
/* create one ACE to hold the mode embedded in reserved special SID */ acelen = setup_special_mode_ACE((struct cifs_ace *)ptr, (__u64)mode); @@ -2423,7 +2423,7 @@ create_sd_buf(umode_t mode, bool set_owner, unsigned int *len) acl.AclRevision = ACL_REVISION; /* See 2.4.4.1 of MS-DTYP */ acl.AclSize = cpu_to_le16(acl_size); acl.AceCount = cpu_to_le16(ace_count); - memcpy(aclptr, &acl, sizeof(struct cifs_acl)); + memcpy(aclptr, &acl, sizeof(struct smb3_acl));
buf->ccontext.DataLength = cpu_to_le32(ptr - (__u8 *)&buf->sd); *len = roundup(ptr - (__u8 *)buf, 8);
From: Numfor Mbiziwo-Tiapo nums@google.com
[ Upstream commit 5ba1071f7554c4027bdbd712a146111de57918de ]
Don't perform unaligned loads in __get_next() and __peek_nbyte_next() as these are forms of undefined behavior:
"A pointer to an object or incomplete type may be converted to a pointer to a different object or incomplete type. If the resulting pointer is not correctly aligned for the pointed-to type, the behavior is undefined."
(from http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf)
These problems were identified using the undefined behavior sanitizer (ubsan) with the tools version of the code and perf test.
[ bp: Massage commit message. ]
Signed-off-by: Numfor Mbiziwo-Tiapo nums@google.com Signed-off-by: Ian Rogers irogers@google.com Signed-off-by: Borislav Petkov bp@suse.de Acked-by: Masami Hiramatsu mhiramat@kernel.org Link: https://lkml.kernel.org/r/20210923161843.751834-1-irogers@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/lib/insn.c | 4 ++-- tools/arch/x86/lib/insn.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c index 058f19b20465..c565def611e2 100644 --- a/arch/x86/lib/insn.c +++ b/arch/x86/lib/insn.c @@ -37,10 +37,10 @@ ((insn)->next_byte + sizeof(t) + n <= (insn)->end_kaddr)
#define __get_next(t, insn) \ - ({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, insn->next_byte, sizeof(t)); insn->next_byte += sizeof(t); leXX_to_cpu(t, r); })
#define __peek_nbyte_next(t, insn, n) \ - ({ t r = *(t*)((insn)->next_byte + n); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, (insn)->next_byte + n, sizeof(t)); leXX_to_cpu(t, r); })
#define get_next(t, insn) \ ({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); }) diff --git a/tools/arch/x86/lib/insn.c b/tools/arch/x86/lib/insn.c index c41f95815480..797699462cd8 100644 --- a/tools/arch/x86/lib/insn.c +++ b/tools/arch/x86/lib/insn.c @@ -37,10 +37,10 @@ ((insn)->next_byte + sizeof(t) + n <= (insn)->end_kaddr)
#define __get_next(t, insn) \ - ({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, insn->next_byte, sizeof(t)); insn->next_byte += sizeof(t); leXX_to_cpu(t, r); })
#define __peek_nbyte_next(t, insn, n) \ - ({ t r = *(t*)((insn)->next_byte + n); leXX_to_cpu(t, r); }) + ({ t r; memcpy(&r, (insn)->next_byte + n, sizeof(t)); leXX_to_cpu(t, r); })
#define get_next(t, insn) \ ({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); })
From: Jens Axboe axboe@kernel.dk
[ Upstream commit 8bab4c09f24ec8d4a7a78ab343620f89d3a24804 ]
If we have a lot of threads and rings, the tctx list can get quite big. This is especially true if we keep creating new threads and rings. Likewise for the provided buffers list. Be nice and insert a conditional reschedule point while iterating the nodes for deletion.
Link: https://lore.kernel.org/io-uring/00000000000064b6b405ccb41113@google.com/ Reported-by: syzbot+111d2a03f51f5ae73775@syzkaller.appspotmail.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/io_uring.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c index 754d59f734d8..ddd241b28f91 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -8649,8 +8649,10 @@ static void io_destroy_buffers(struct io_ring_ctx *ctx) struct io_buffer *buf; unsigned long index;
- xa_for_each(&ctx->io_buffers, index, buf) + xa_for_each(&ctx->io_buffers, index, buf) { __io_remove_buffers(ctx, buf, index, -1U); + cond_resched(); + } }
static void io_req_cache_free(struct list_head *list, struct task_struct *tsk) @@ -9146,8 +9148,10 @@ static void io_uring_clean_tctx(struct io_uring_task *tctx) struct io_tctx_node *node; unsigned long index;
- xa_for_each(&tctx->xa, index, node) + xa_for_each(&tctx->xa, index, node) { io_uring_del_tctx_node(index); + cond_resched(); + } if (wq) { /* * Must be after io_uring_del_task_file() (removes nodes under
From: Ming Lei ming.lei@redhat.com
[ Upstream commit a647a524a46736786c95cdb553a070322ca096e3 ]
rq_qos framework is only applied on request based driver, so:
1) rq_qos_done_bio() needn't to be called for bio based driver
2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code.
Especially in bio_endio():
1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases
2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio()
Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked.
Reported-by: Yu Kuai yukuai3@huawei.com Cc: tj@kernel.org Signed-off-by: Ming Lei ming.lei@redhat.com Reviewed-by: Christoph Hellwig hch@lst.de Acked-by: Tejun Heo tj@kernel.org Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/bio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/block/bio.c b/block/bio.c index d95e3456ba0c..52548c487883 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1396,7 +1396,7 @@ void bio_endio(struct bio *bio) if (!bio_integrity_endio(bio)) return;
- if (bio->bi_bdev) + if (bio->bi_bdev && bio_flagged(bio, BIO_TRACKED)) rq_qos_done_bio(bio->bi_bdev->bd_disk->queue, bio);
if (bio->bi_bdev && bio_flagged(bio, BIO_TRACE_COMPLETION)) {
From: Changbin Du changbin.du@gmail.com
[ Upstream commit ebaeab2fe87987cef28eb5ab174c42cd28594387 ]
Idle page tracking can also be used for process address space, not only file mappings.
Without this change, using with '-i' option for process address space encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor ...
Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com Signed-off-by: Changbin Du changbin.du@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/vm/page-types.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c index 0517c744b04e..f62f10c988db 100644 --- a/tools/vm/page-types.c +++ b/tools/vm/page-types.c @@ -1331,7 +1331,7 @@ int main(int argc, char *argv[]) if (opt_list && opt_list_mapcnt) kpagecount_fd = checked_open(PROC_KPAGECOUNT, O_RDONLY);
- if (opt_mark_idle && opt_file) + if (opt_mark_idle) page_idle_fd = checked_open(SYS_KERNEL_MM_PAGE_IDLE, O_RDWR);
if (opt_list && opt_pid)
From: Nathan Chancellor nathan@kernel.org
[ Upstream commit 19532869feb9b0a97d17ddc14609d1e53a5b60db ]
Currently, the asan-stack parameter is only passed along if CFLAGS_KASAN_SHADOW is not empty, which requires KASAN_SHADOW_OFFSET to be defined in Kconfig so that the value can be checked. In RISC-V's case, KASAN_SHADOW_OFFSET is not defined in Kconfig, which means that asan-stack does not get disabled with clang even when CONFIG_KASAN_STACK is disabled, resulting in large stack warnings with allmodconfig:
drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c:117:12: error: stack frame size (14400) exceeds limit (2048) in function 'lb035q02_connect' [-Werror,-Wframe-larger-than] static int lb035q02_connect(struct omap_dss_device *dssdev) ^ 1 error generated.
Ensure that the value of CONFIG_KASAN_STACK is always passed along to the compiler so that these warnings do not happen when CONFIG_KASAN_STACK is disabled.
Link: https://github.com/ClangBuiltLinux/linux/issues/1453 References: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier") Link: https://lkml.kernel.org/r/20210922205525.570068-1-nathan@kernel.org Signed-off-by: Nathan Chancellor nathan@kernel.org Reviewed-by: Marco Elver elver@google.com Cc: Andrey Ryabinin ryabinin.a.a@gmail.com Cc: Alexander Potapenko glider@google.com Cc: Andrey Konovalov andreyknvl@gmail.com Cc: Dmitry Vyukov dvyukov@google.com Cc: Nick Desaulniers ndesaulniers@google.com Cc: Arnd Bergmann arnd@arndb.de Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/Makefile.kasan | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan index 801c415bac59..b9e94c5e7097 100644 --- a/scripts/Makefile.kasan +++ b/scripts/Makefile.kasan @@ -33,10 +33,11 @@ else CFLAGS_KASAN := $(CFLAGS_KASAN_SHADOW) \ $(call cc-param,asan-globals=1) \ $(call cc-param,asan-instrumentation-with-call-threshold=$(call_threshold)) \ - $(call cc-param,asan-stack=$(stack_enable)) \ $(call cc-param,asan-instrument-allocas=1) endif
+CFLAGS_KASAN += $(call cc-param,asan-stack=$(stack_enable)) + endif # CONFIG_KASAN_GENERIC
ifdef CONFIG_KASAN_SW_TAGS
linux-stable-mirror@lists.linaro.org
-
Sasha Levin