The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x e047dd448d2bc12b8c30d7e3e6e98cea1fc28a17 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2024041520-wooing-barman-5421@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From e047dd448d2bc12b8c30d7e3e6e98cea1fc28a17 Mon Sep 17 00:00:00 2001 From: Zhongwei zhongwei.zhang@amd.com Date: Wed, 27 Mar 2024 13:49:40 +0800 Subject: [PATCH] drm/amd/display: Adjust dprefclk by down spread percentage.

[Why] OLED panels show no display for large vtotal timings.

[How] Check if ss is enabled and read from lut for spread spectrum percentage. Adjust dprefclk as required. DP_DTO adjustment is for edp only.

Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas nicholas.kazlauskas@amd.com Acked-by: Hamza Mahfooz hamza.mahfooz@amd.com Signed-off-by: Zhongwei zhongwei.zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 101fe96287cb..d9c5692c86c2 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -73,6 +73,12 @@ #define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_SEL_MASK 0x00000007L #define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_DIV_MASK 0x000F0000L

+#define regCLK5_0_CLK5_spll_field_8 0x464b +#define regCLK5_0_CLK5_spll_field_8_BASE_IDX 0 + +#define CLK5_0_CLK5_spll_field_8__spll_ssc_en__SHIFT 0xd +#define CLK5_0_CLK5_spll_field_8__spll_ssc_en_MASK 0x00002000L + #define SMU_VER_THRESHOLD 0x5D4A00 //93.74.0

#define REG(reg_name) \ @@ -411,6 +417,17 @@ static void dcn35_dump_clk_registers(struct clk_state_registers_and_bypass *regs { }

+static bool dcn35_is_spll_ssc_enabled(struct clk_mgr *clk_mgr_base) +{ + struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base); + struct dc_context *ctx = clk_mgr->base.ctx; + uint32_t ssc_enable; + + REG_GET(CLK5_0_CLK5_spll_field_8, spll_ssc_en, &ssc_enable); + + return ssc_enable == 1; +} + static void init_clk_states(struct clk_mgr *clk_mgr) { struct clk_mgr_internal *clk_mgr_int = TO_CLK_MGR_INTERNAL(clk_mgr); @@ -428,7 +445,16 @@ static void init_clk_states(struct clk_mgr *clk_mgr)

void dcn35_init_clocks(struct clk_mgr *clk_mgr) { + struct clk_mgr_internal *clk_mgr_int = TO_CLK_MGR_INTERNAL(clk_mgr); init_clk_states(clk_mgr); + + // to adjust dp_dto reference clock if ssc is enable otherwise to apply dprefclk + if (dcn35_is_spll_ssc_enabled(clk_mgr)) + clk_mgr->dp_dto_source_clock_in_khz = + dce_adjust_dp_ref_freq_for_ss(clk_mgr_int, clk_mgr->dprefclk_khz); + else + clk_mgr->dp_dto_source_clock_in_khz = clk_mgr->dprefclk_khz; + } static struct clk_bw_params dcn35_bw_params = { .vram_type = Ddr4MemType, @@ -517,6 +543,28 @@ static DpmClocks_t_dcn35 dummy_clocks;

static struct dcn35_watermarks dummy_wms = { 0 };

+static struct dcn35_ss_info_table ss_info_table = { + .ss_divider = 1000, + .ss_percentage = {0, 0, 375, 375, 375} +}; + +static void dcn35_read_ss_info_from_lut(struct clk_mgr_internal *clk_mgr) +{ + struct dc_context *ctx = clk_mgr->base.ctx; + uint32_t clock_source; + + REG_GET(CLK1_CLK2_BYPASS_CNTL, CLK2_BYPASS_SEL, &clock_source); + // If it's DFS mode, clock_source is 0. + if (dcn35_is_spll_ssc_enabled(&clk_mgr->base) && (clock_source < ARRAY_SIZE(ss_info_table.ss_percentage))) { + clk_mgr->dprefclk_ss_percentage = ss_info_table.ss_percentage[clock_source]; + + if (clk_mgr->dprefclk_ss_percentage != 0) { + clk_mgr->ss_on_dprefclk = true; + clk_mgr->dprefclk_ss_divider = ss_info_table.ss_divider; + } + } +} + static void dcn35_build_watermark_ranges(struct clk_bw_params *bw_params, struct dcn35_watermarks *table) { int i, num_valid_sets; @@ -1061,6 +1109,8 @@ void dcn35_clk_mgr_construct( dce_clock_read_ss_info(&clk_mgr->base); /*when clk src is from FCH, it could have ss, same clock src as DPREF clk*/

+ dcn35_read_ss_info_from_lut(&clk_mgr->base); + clk_mgr->base.base.bw_params = &dcn35_bw_params;

if (clk_mgr->base.base.ctx->dc->debug.pstate_enabled) { diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c index 970644b695cd..b5e0289d2fe8 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c @@ -976,7 +976,10 @@ static bool dcn31_program_pix_clk( struct bp_pixel_clock_parameters bp_pc_params = {0}; enum transmitter_color_depth bp_pc_colour_depth = TRANSMITTER_COLOR_DEPTH_24;

- if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0) + // Apply ssed(spread spectrum) dpref clock for edp only. + if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0 + && pix_clk_params->signal_type == SIGNAL_TYPE_EDP + && encoding == DP_8b_10b_ENCODING) dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz; // For these signal types Driver to program DP_DTO without calling VBIOS Command table if (dc_is_dp_signal(pix_clk_params->signal_type) || dc_is_virtual_signal(pix_clk_params->signal_type)) { @@ -1093,9 +1096,6 @@ static bool get_pixel_clk_frequency_100hz( unsigned int modulo_hz = 0; unsigned int dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dprefclk_khz;

- if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0) - dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz; - if (clock_source->id == CLOCK_SOURCE_ID_DP_DTO) { clock_hz = REG_READ(PHASE[inst]);