FAILED: patch "[PATCH] mmc: sdhci-brcmstb: add cqhci suspend/resume to PM ops" failed to apply to 5.10-stable tree
The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 723ef0e20dbb2aa1b5406d2bb75374fc48187daa # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025032414-unsheathe-greedily-1d17@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 723ef0e20dbb2aa1b5406d2bb75374fc48187daa Mon Sep 17 00:00:00 2001 From: Kamal Dasu kamal.dasu@broadcom.com Date: Tue, 11 Mar 2025 12:59:35 -0400 Subject: [PATCH] mmc: sdhci-brcmstb: add cqhci suspend/resume to PM ops
cqhci timeouts observed on brcmstb platforms during suspend: ... [ 164.832853] mmc0: cqhci: timeout for tag 18 ...
Adding cqhci_suspend()/resume() calls to disable cqe in sdhci_brcmstb_suspend()/resume() respectively to fix CQE timeouts seen on PM suspend.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)") Cc: stable@vger.kernel.org Signed-off-by: Kamal Dasu kamal.dasu@broadcom.com Reviewed-by: Florian Fainelli florian.fainelli@broadcom.com Link: https://lore.kernel.org/r/20250311165946.28190-1-kamal.dasu@broadcom.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index 0ef4d578ade8..48cdcba0f39c 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -503,8 +503,15 @@ static int sdhci_brcmstb_suspend(struct device *dev) struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret;
clk_disable_unprepare(priv->base_clk); + if (host->mmc->caps2 & MMC_CAP2_CQE) { + ret = cqhci_suspend(host->mmc); + if (ret) + return ret; + } + return sdhci_pltfm_suspend(dev); }
@@ -529,6 +536,9 @@ static int sdhci_brcmstb_resume(struct device *dev) ret = clk_set_rate(priv->base_clk, priv->base_freq_hz); }
+ if (host->mmc->caps2 & MMC_CAP2_CQE) + ret = cqhci_resume(host->mmc); + return ret; } #endif
From: Kamal Dasu kdasu.kdev@gmail.com
[ upstream commit 97904a59855c7ac7c613085bc6bdc550d48524ff ]
The 72116B0 has improved SDIO controllers that allow the max clock rate to be increased from a max of 100MHz to a max of 150MHz. The driver will need to get the clock and increase it's default rate and override the caps register, that still indicates a max of 100MHz. The new clock will be named "sdio_freq" in the DT node's "clock-names" list. The driver will use a DT property, "clock-frequency", to enable this functionality and will get the actual rate in MHz from the property to allow various speeds to be requested.
Cc: stable@vger.kernel.org Signed-off-by: Al Cooper alcooperx@gmail.com Signed-off-by: Kamal Dasu kdasu.kdev@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Link: https://lore.kernel.org/r/20220520183108.47358-3-kdasu.kdev@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Kamal Dasu kamal.dasu@broadcom.com --- drivers/mmc/host/sdhci-brcmstb.c | 69 +++++++++++++++++++++++++++++++- 1 file changed, 68 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index 4d42b1810ace..8fb23b122887 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -32,6 +32,8 @@ struct sdhci_brcmstb_priv { void __iomem *cfg_regs; unsigned int flags; + struct clk *base_clk; + u32 base_freq_hz; };
struct brcmstb_match_priv { @@ -251,9 +253,11 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) struct sdhci_pltfm_host *pltfm_host; const struct of_device_id *match; struct sdhci_brcmstb_priv *priv; + u32 actual_clock_mhz; struct sdhci_host *host; struct resource *iomem; struct clk *clk; + struct clk *base_clk; int res;
match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node); @@ -331,6 +335,35 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT) host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+ /* Change the base clock frequency if the DT property exists */ + if (device_property_read_u32(&pdev->dev, "clock-frequency", + &priv->base_freq_hz) != 0) + goto add_host; + + base_clk = devm_clk_get_optional(&pdev->dev, "sdio_freq"); + if (IS_ERR(base_clk)) { + dev_warn(&pdev->dev, "Clock for "sdio_freq" not found\n"); + goto add_host; + } + + res = clk_prepare_enable(base_clk); + if (res) + goto err; + + /* set improved clock rate */ + clk_set_rate(base_clk, priv->base_freq_hz); + actual_clock_mhz = clk_get_rate(base_clk) / 1000000; + + host->caps &= ~SDHCI_CLOCK_V3_BASE_MASK; + host->caps |= (actual_clock_mhz << SDHCI_CLOCK_BASE_SHIFT); + /* Disable presets because they are now incorrect */ + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + + dev_dbg(&pdev->dev, "Base Clock Frequency changed to %dMHz\n", + actual_clock_mhz); + priv->base_clk = base_clk; + +add_host: res = sdhci_brcmstb_add_host(host, priv); if (res) goto err; @@ -341,6 +374,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) err: sdhci_pltfm_free(pdev); err_clk: + clk_disable_unprepare(base_clk); clk_disable_unprepare(clk); return res; } @@ -352,11 +386,44 @@ static void sdhci_brcmstb_shutdown(struct platform_device *pdev)
MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
+#ifdef CONFIG_PM_SLEEP +static int sdhci_brcmstb_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host); + + clk_disable_unprepare(priv->base_clk); + return sdhci_pltfm_suspend(dev); +} + +static int sdhci_brcmstb_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret; + + ret = sdhci_pltfm_resume(dev); + if (!ret && priv->base_freq_hz) { + ret = clk_prepare_enable(priv->base_clk); + if (!ret) + ret = clk_set_rate(priv->base_clk, priv->base_freq_hz); + } + + return ret; +} +#endif + +static const struct dev_pm_ops sdhci_brcmstb_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(sdhci_brcmstb_suspend, sdhci_brcmstb_resume) +}; + static struct platform_driver sdhci_brcmstb_driver = { .driver = { .name = "sdhci-brcmstb", .probe_type = PROBE_PREFER_ASYNCHRONOUS, - .pm = &sdhci_pltfm_pmops, + .pm = &sdhci_brcmstb_pmops, .of_match_table = of_match_ptr(sdhci_brcm_of_match), }, .probe = sdhci_brcmstb_probe,
From: Nathan Chancellor nathan@kernel.org
[ upstream commit c3c0ed75ffbff5c70667030b5139bbb75b0a30f5 ]
Clang warns a few times along the lines of:
drivers/mmc/host/sdhci-brcmstb.c:302:6: warning: variable 'base_clk' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (res) ^~~ drivers/mmc/host/sdhci-brcmstb.c:376:24: note: uninitialized use occurs here clk_disable_unprepare(base_clk); ^~~~~~~~
base_clk is used in the error path before it is initialized. Initialize it to NULL, as clk_disable_unprepare() calls clk_disable() and clk_unprepare(), which both handle NULL pointers gracefully.
Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1650 Reported-by: kernel test robot lkp@intel.com Signed-off-by: Nathan Chancellor nathan@kernel.org Acked-by: Florian Fainelli f.fainelli@gmail.com Acked-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/20220608152757.82529-1-nathan@kernel.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Kamal Dasu kamal.dasu@broadcom.com --- drivers/mmc/host/sdhci-brcmstb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index 8fb23b122887..931b34bf2af1 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -257,7 +257,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) struct sdhci_host *host; struct resource *iomem; struct clk *clk; - struct clk *base_clk; + struct clk *base_clk = NULL; int res;
match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node);
From: Kamal Dasu kdasu.kdev@gmail.com
[ upstream commit 886201c70a1cab34ef96f867c2b2dd6379ffa7b9 ]
Use clk_get_rate for base_clk on resume before setting new rate. This change ensures that the clock api returns current rate and sets the clock to the desired rate and honors CLK_GET_NO_CACHE attribute used by clock api.
Fixes: 97904a59855c (mmc: sdhci-brcmstb: Add ability to increase max clock rate for 72116b0) Cc: stable@vger.kernel.org Signed-off-by: Kamal Dasu kdasu.kdev@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Link: https://lore.kernel.org/r/20220714174132.18541-1-kdasu.kdev@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Kamal Dasu kamal.dasu@broadcom.com --- drivers/mmc/host/sdhci-brcmstb.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index 931b34bf2af1..ff0404d591d1 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -407,7 +407,14 @@ static int sdhci_brcmstb_resume(struct device *dev) ret = sdhci_pltfm_resume(dev); if (!ret && priv->base_freq_hz) { ret = clk_prepare_enable(priv->base_clk); - if (!ret) + /* + * Note: using clk_get_rate() below as clk_get_rate() + * honors CLK_GET_RATE_NOCACHE attribute, but clk_set_rate() + * may do implicit get_rate() calls that do not honor + * CLK_GET_RATE_NOCACHE. + */ + if (!ret && + (clk_get_rate(priv->base_clk) != priv->base_freq_hz)) ret = clk_set_rate(priv->base_clk, priv->base_freq_hz); }
commit 7116ceb621274510ccbc7e9511f44ba6c3456ff8 upstream
cqhci timeouts observed on brcmstb platforms during suspend: ... [ 164.832853] mmc0: cqhci: timeout for tag 18 ...
Adding cqhci_suspend()/resume() calls to disable cqe in sdhci_brcmstb_suspend()/resume() respectively to fix CQE timeouts seen on PM suspend.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)") Cc: stable@vger.kernel.org Signed-off-by: Kamal Dasu kamal.dasu@broadcom.com --- drivers/mmc/host/sdhci-brcmstb.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index ff0404d591d1..05b06fcc90bf 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -392,8 +392,15 @@ static int sdhci_brcmstb_suspend(struct device *dev) struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret;
clk_disable_unprepare(priv->base_clk); + if (host->mmc->caps2 & MMC_CAP2_CQE) { + ret = cqhci_suspend(host->mmc); + if (ret) + return ret; + } + return sdhci_pltfm_suspend(dev); }
@@ -418,6 +425,9 @@ static int sdhci_brcmstb_resume(struct device *dev) ret = clk_set_rate(priv->base_clk, priv->base_freq_hz); }
+ if (host->mmc->caps2 & MMC_CAP2_CQE) + ret = cqhci_resume(host->mmc); + return ret; } #endif
linux-stable-mirror@lists.linaro.org
-
gregkh＠linuxfoundation.org -
Kamal Dasu