From: Biju Das biju.das.jz@bp.renesas.com

[ Upstream commit c75ed9f54ce8d349fee557f2b471a4d637ed2a6b ]

We usually do cleanup in reverse order of init. Currently in case of error rz_ssi_release_dma_channels() done in the reverse order. This patch improves error handling in rz_ssi_probe() error path.

While at it, use "goto cleanup" style to reduce code duplication.

Reported-by: Pavel Machek pavel@denx.de Signed-off-by: Biju Das biju.das.jz@bp.renesas.com Link: https://lore.kernel.org/r/20220728092612.38858-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rz-ssi.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/sound/soc/sh/rz-ssi.c b/sound/soc/sh/rz-ssi.c index e392de7a262e..3d74acffec11 100644 --- a/sound/soc/sh/rz-ssi.c +++ b/sound/soc/sh/rz-ssi.c @@ -1016,32 +1016,36 @@ static int rz_ssi_probe(struct platform_device *pdev)

ssi->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (IS_ERR(ssi->rstc)) { - rz_ssi_release_dma_channels(ssi); - return PTR_ERR(ssi->rstc); + ret = PTR_ERR(ssi->rstc); + goto err_reset; }

reset_control_deassert(ssi->rstc); pm_runtime_enable(&pdev->dev); ret = pm_runtime_resume_and_get(&pdev->dev); if (ret < 0) { - rz_ssi_release_dma_channels(ssi); - pm_runtime_disable(ssi->dev); - reset_control_assert(ssi->rstc); - return dev_err_probe(ssi->dev, ret, "pm_runtime_resume_and_get failed\n"); + dev_err(&pdev->dev, "pm_runtime_resume_and_get failed\n"); + goto err_pm; }

ret = devm_snd_soc_register_component(&pdev->dev, &rz_ssi_soc_component, rz_ssi_soc_dai, ARRAY_SIZE(rz_ssi_soc_dai)); if (ret < 0) { - rz_ssi_release_dma_channels(ssi); - - pm_runtime_put(ssi->dev); - pm_runtime_disable(ssi->dev); - reset_control_assert(ssi->rstc); dev_err(&pdev->dev, "failed to register snd component\n"); + goto err_snd_soc; }

+ return 0; + +err_snd_soc: + pm_runtime_put(ssi->dev); +err_pm: + pm_runtime_disable(ssi->dev); + reset_control_assert(ssi->rstc); +err_reset: + rz_ssi_release_dma_channels(ssi); + return ret; }

From: Alexandre Vicenzi alexandre.vicenzi@suse.com

[ Upstream commit f1432cd24c240cedf78c0d026631e3b10052c8e1 ]

The correct tracer name is timerlat and not timelat.

Link: https://lore.kernel.org/linux-trace-devel/20220808180343.22262-1-alexandre.v...

Signed-off-by: Alexandre Vicenzi alexandre.vicenzi@suse.com Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/tools/rtla/rtla-timerlat-hist.rst | 2 +- tools/tracing/rtla/src/timerlat_hist.c | 2 +- tools/tracing/rtla/src/timerlat_top.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst index e12eae1f3301..6bf7f0ca4556 100644 --- a/Documentation/tools/rtla/rtla-timerlat-hist.rst +++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst @@ -33,7 +33,7 @@ EXAMPLE ======= In the example below, **rtla timerlat hist** is set to run for *10* minutes, in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat -hist** will change the priority of the *timelat* threads to run under +hist** will change the priority of the *timerlat* threads to run under *SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The *1ms* period is also passed to the *timerlat* tracer::

diff --git a/tools/tracing/rtla/src/timerlat_hist.c b/tools/tracing/rtla/src/timerlat_hist.c index f3ec628f5e51..4b48af8a8309 100644 --- a/tools/tracing/rtla/src/timerlat_hist.c +++ b/tools/tracing/rtla/src/timerlat_hist.c @@ -892,7 +892,7 @@ int timerlat_hist_main(int argc, char *argv[]) return_value = 0;

if (trace_is_off(&tool->trace, &record->trace)) { - printf("rtla timelat hit stop tracing\n"); + printf("rtla timerlat hit stop tracing\n"); if (params->trace_output) { printf(" Saving trace to %s\n", params->trace_output); save_trace_to_file(record->trace.inst, params->trace_output); diff --git a/tools/tracing/rtla/src/timerlat_top.c b/tools/tracing/rtla/src/timerlat_top.c index 35452a1d45e9..334271935222 100644 --- a/tools/tracing/rtla/src/timerlat_top.c +++ b/tools/tracing/rtla/src/timerlat_top.c @@ -687,7 +687,7 @@ int timerlat_top_main(int argc, char *argv[]) return_value = 0;

if (trace_is_off(&top->trace, &record->trace)) { - printf("rtla timelat hit stop tracing\n"); + printf("rtla timerlat hit stop tracing\n"); if (params->trace_output) { printf(" Saving trace to %s\n", params->trace_output); save_trace_to_file(record->trace.inst, params->trace_output);

From: Chiawen Huang chiawen.huang@amd.com

[ Upstream commit 9c580e8f6cd6524d4e2c3490c440110526f7ddd6 ]

[Why] Enabling stream with tg lock makes config settings pending causing the garbage until tg unlock.

[How] Keep the original lock mechanism The driver doesn't lock tg if plane_state is null.

Reviewed-by: Anthony Koo Anthony.Koo@amd.com Acked-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Chiawen Huang chiawen.huang@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index e3a62873c0e7..d9ab27991535 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -108,6 +108,7 @@ void dcn10_lock_all_pipes(struct dc *dc, */ if (pipe_ctx->top_pipe || !pipe_ctx->stream || + !pipe_ctx->plane_state || !tg->funcs->is_tg_enabled(tg)) continue;

From: Leo Ma hanghong.ma@amd.com

[ Upstream commit 0591183699fceeafb4c4141072d47775de83ecfb ]

[Why] Reported from customer the checksum in AMD VSIF V3 is incorrect and causing blank screen issue.

[How] Fix the packet length issue on AMD HDMI VSIF V3.

Reviewed-by: Anthony Koo Anthony.Koo@amd.com Acked-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Leo Ma hanghong.ma@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/display/modules/freesync/freesync.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c index 03fa63d56fa6..948151e73573 100644 --- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c +++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c @@ -615,10 +615,6 @@ static void build_vrr_infopacket_data_v1(const struct mod_vrr_params *vrr, * Note: We should never go above the field rate of the mode timing set. */ infopacket->sb[8] = (unsigned char)((vrr->max_refresh_in_uhz + 500000) / 1000000); - - /* FreeSync HDR */ - infopacket->sb[9] = 0; - infopacket->sb[10] = 0; }

static void build_vrr_infopacket_data_v3(const struct mod_vrr_params *vrr, @@ -686,10 +682,6 @@ static void build_vrr_infopacket_data_v3(const struct mod_vrr_params *vrr,

/* PB16 : Reserved bits 7:1, FixedRate bit 0 */ infopacket->sb[16] = (vrr->state == VRR_STATE_ACTIVE_FIXED) ? 1 : 0; - - //FreeSync HDR - infopacket->sb[9] = 0; - infopacket->sb[10] = 0; }

static void build_vrr_infopacket_fs2_data(enum color_transfer_func app_tf, @@ -774,8 +766,7 @@ static void build_vrr_infopacket_header_v2(enum signal_type signal, /* HB2 = [Bits 7:5 = 0] [Bits 4:0 = Length = 0x09] */ infopacket->hb2 = 0x09;

- *payload_size = 0x0A; - + *payload_size = 0x09; } else if (dc_is_dp_signal(signal)) {

/* HEADER */ @@ -824,9 +815,9 @@ static void build_vrr_infopacket_header_v3(enum signal_type signal, infopacket->hb1 = version;

/* HB2 = [Bits 7:5 = 0] [Bits 4:0 = Length] */ - *payload_size = 0x10; - infopacket->hb2 = *payload_size - 1; //-1 for checksum + infopacket->hb2 = 0x10;

+ *payload_size = 0x10; } else if (dc_is_dp_signal(signal)) {

/* HEADER */

From: Fudong Wang Fudong.Wang@amd.com

[ Upstream commit b2a93490201300a749ad261b5c5d05cb50179c44 ]

[Why] After ODM clock off, optc underflow bit will be kept there always and clear not work. We need to clear that before clock off.

[How] Clear that if have when clock off.

Reviewed-by: Alvin Lee alvin.lee2@amd.com Acked-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Fudong Wang Fudong.Wang@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c index b1671b00ce40..2349977b0abb 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c @@ -464,6 +464,11 @@ void optc1_enable_optc_clock(struct timing_generator *optc, bool enable) OTG_CLOCK_ON, 1, 1, 1000); } else { + + //last chance to clear underflow, otherwise, it will always there due to clock is off. + if (optc->funcs->is_optc_underflow_occurred(optc) == true) + optc->funcs->clear_optc_underflow(optc); + REG_UPDATE_2(OTG_CLOCK_CONTROL, OTG_CLOCK_GATE_DIS, 0, OTG_CLOCK_EN, 0);

From: Kenneth Feng kenneth.feng@amd.com

[ Upstream commit 4e64b529c5b04e7944b41de554ee686ecab00744 ]

skip pptable override for smu_v13_0_7 secure boards only.

Signed-off-by: Kenneth Feng kenneth.feng@amd.com Reviewed-by: Feifei Xu Feifei.Xu@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c index 5aa08c031f72..1d8a9e5b3cc0 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0.c @@ -203,6 +203,9 @@ int smu_v13_0_init_pptable_microcode(struct smu_context *smu) if (!adev->scpm_enabled) return 0;

+ if (adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 7)) + return 0; + /* override pptable_id from driver parameter */ if (amdgpu_smu_pptable_id >= 0) { pptable_id = amdgpu_smu_pptable_id; @@ -210,13 +213,6 @@ int smu_v13_0_init_pptable_microcode(struct smu_context *smu) } else { pptable_id = smu->smu_table.boot_values.pp_table_id;

- if (adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 7) && - pptable_id == 3667) - pptable_id = 36671; - - if (adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 7) && - pptable_id == 3688) - pptable_id = 36881; /* * Temporary solution for SMU V13.0.0 with SCPM enabled: * - use 36831 signed pptable when pp_table_id is 3683

From: Zhen Ni nizhen@uniontech.com

[ Upstream commit 5afb76522a0af0513b6dc01f84128a73206b051b ]

Memory is allocated for gpu_metrics_table in smu_v13_0_4_init_smc_tables(), but not freed in smu_v13_0_4_fini_smc_tables(). This may cause memory leaks, fix it.

Reviewed-by: Evan Quan evan.quan@amd.com Signed-off-by: Zhen Ni nizhen@uniontech.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c index 5a17b51aa0f9..7df360c25d51 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c @@ -190,6 +190,9 @@ static int smu_v13_0_4_fini_smc_tables(struct smu_context *smu) kfree(smu_table->watermarks_table); smu_table->watermarks_table = NULL;

+ kfree(smu_table->gpu_metrics_table); + smu_table->gpu_metrics_table = NULL; + return 0; }

From: Li Qiong liqiong@nfschina.com

[ Upstream commit 40b4ac880e21d917da7f3752332fa57564a4c202 ]

The platform_get_irq_byname() returns non-zero IRQ number or negative error number. "if (irq)" always true, chang it to "if (irq > 0)"

Signed-off-by: Li Qiong liqiong@nfschina.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/microchip/lan966x/lan966x_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c index 1d6e3b641b2e..d928b75f3780 100644 --- a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c +++ b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c @@ -710,7 +710,7 @@ static void lan966x_cleanup_ports(struct lan966x *lan966x) disable_irq(lan966x->xtr_irq); lan966x->xtr_irq = -ENXIO;

- if (lan966x->ana_irq) { + if (lan966x->ana_irq > 0) { disable_irq(lan966x->ana_irq); lan966x->ana_irq = -ENXIO; } @@ -718,10 +718,10 @@ static void lan966x_cleanup_ports(struct lan966x *lan966x) if (lan966x->fdma) devm_free_irq(lan966x->dev, lan966x->fdma_irq, lan966x);

- if (lan966x->ptp_irq) + if (lan966x->ptp_irq > 0) devm_free_irq(lan966x->dev, lan966x->ptp_irq, lan966x);

- if (lan966x->ptp_ext_irq) + if (lan966x->ptp_ext_irq > 0) devm_free_irq(lan966x->dev, lan966x->ptp_ext_irq, lan966x); }

@@ -1049,7 +1049,7 @@ static int lan966x_probe(struct platform_device *pdev) }

lan966x->ana_irq = platform_get_irq_byname(pdev, "ana"); - if (lan966x->ana_irq) { + if (lan966x->ana_irq > 0) { err = devm_request_threaded_irq(&pdev->dev, lan966x->ana_irq, NULL, lan966x_ana_irq_handler, IRQF_ONESHOT, "ana irq", lan966x);

From: Stefan Binding sbinding@opensource.cirrus.com

[ Upstream commit 461122b999bda2ebef2086a35d8990f9ccac5ab8 ]

These Asus Zenbook laptop use Realtek HDA codec combined with 2xCS35L41 Amplifiers using SPI.

Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com Link: https://lore.kernel.org/r/20220815141953.25197-1-sbinding@opensource.cirrus.... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 619e6025ba97..7aaa021f550d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9246,6 +9246,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1271, "ASUS X430UN", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1290, "ASUS X441SA", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x12a0, "ASUS X441UV", ALC233_FIXUP_EAPD_COEF_AND_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1043, 0x12af, "ASUS UX582ZS", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1313, "Asus K42JZ", ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE), @@ -9266,6 +9267,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x19e1, "ASUS UX581LV", ALC295_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x1a8f, "ASUS UX582ZS", ALC245_FIXUP_CS35L41_SPI_2), SND_PCI_QUIRK(0x1043, 0x1b11, "ASUS UX431DA", ALC294_FIXUP_ASUS_COEF_1B), SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE),

From: Namjae Jeon linkinjeon@kernel.org

[ Upstream commit 17661ecf6a64eb11ae7f1108fe88686388b2acd5 ]

When smb client open file in ksmbd share with O_TRUNC, dos attribute xattr is removed as well as data in file. This cause the FSCTL_SET_SPARSE request from the client fails because ksmbd can't update the dos attribute after setting ATTR_SPARSE_FILE. And this patch fix xfstests generic/469 test also.

Signed-off-by: Namjae Jeon linkinjeon@kernel.org Reviewed-by: Hyunchul Lee hyc.lee@gmail.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ksmbd/smb2pdu.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index bbb3958b6469..35f5ea1c9dfc 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -2315,15 +2315,15 @@ static int smb2_remove_smb_xattrs(struct path *path) name += strlen(name) + 1) { ksmbd_debug(SMB, "%s, len %zd\n", name, strlen(name));

- if (strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) && - strncmp(&name[XATTR_USER_PREFIX_LEN], DOS_ATTRIBUTE_PREFIX, - DOS_ATTRIBUTE_PREFIX_LEN) && - strncmp(&name[XATTR_USER_PREFIX_LEN], STREAM_PREFIX, STREAM_PREFIX_LEN)) - continue; - - err = ksmbd_vfs_remove_xattr(user_ns, path->dentry, name); - if (err) - ksmbd_debug(SMB, "remove xattr failed : %s\n", name); + if (!strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN) && + !strncmp(&name[XATTR_USER_PREFIX_LEN], STREAM_PREFIX, + STREAM_PREFIX_LEN)) { + err = ksmbd_vfs_remove_xattr(user_ns, path->dentry, + name); + if (err) + ksmbd_debug(SMB, "remove xattr failed : %s\n", + name); + } } out: kvfree(xattr_list);

From: Evan Quan evan.quan@amd.com

[ Upstream commit 0a2d922a5618377cdf8fa476351362733ef55342 ]

To avoid any potential memory leak.

Signed-off-by: Evan Quan evan.quan@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c index 78f3d9e722bb..32bb6b1d9526 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c @@ -4281,6 +4281,7 @@ static const struct pptable_funcs sienna_cichlid_ppt_funcs = { .dump_pptable = sienna_cichlid_dump_pptable, .init_microcode = smu_v11_0_init_microcode, .load_microcode = smu_v11_0_load_microcode, + .fini_microcode = smu_v11_0_fini_microcode, .init_smc_tables = sienna_cichlid_init_smc_tables, .fini_smc_tables = smu_v11_0_fini_smc_tables, .init_power = smu_v11_0_init_power,

From: Ilya Bakoulin Ilya.Bakoulin@amd.com

[ Upstream commit 04fb918bf421b299feaee1006e82921d7d381f18 ]

[Why] Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned between different HDMI lanes when using YCbCr420 10-bit pixel format.

BIOS functions for transmitter/encoder control take pixel clock in kHz increments, whereas the function for setting the pixel clock is in 100Hz increments. Setting pixel clock to a value that is not on a kHz boundary will cause the issue.

[How] Round pixel clock down to nearest kHz in 10/12-bpc cases.

Reviewed-by: Aric Cyr Aric.Cyr@amd.com Acked-by: Brian Chang Brian.Chang@amd.com Signed-off-by: Ilya Bakoulin Ilya.Bakoulin@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c index 845aa8a1027d..c4040adb88b0 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c @@ -545,9 +545,11 @@ static void dce112_get_pix_clk_dividers_helper ( switch (pix_clk_params->color_depth) { case COLOR_DEPTH_101010: actual_pixel_clock_100hz = (actual_pixel_clock_100hz * 5) >> 2; + actual_pixel_clock_100hz -= actual_pixel_clock_100hz % 10; break; case COLOR_DEPTH_121212: actual_pixel_clock_100hz = (actual_pixel_clock_100hz * 6) >> 2; + actual_pixel_clock_100hz -= actual_pixel_clock_100hz % 10; break; case COLOR_DEPTH_161616: actual_pixel_clock_100hz = actual_pixel_clock_100hz * 2;

From: Tom Chung chiahsuan.chung@amd.com

[ Upstream commit e98459c06e3d45c2229b097f7b8cdd412357fa2f ]

[Why] Pipes for MPO primary and overlay will be power down and power up during plug/unplug external monitor while MPO video playback. But the pipes were the same after plug/unplug and should not need to be power down and power up or it will make page flip interrupt disabled and cause hang issue.

[How] Add pipe split change condition that not only check the top pipe pointer but also check the index of top pipe if both top pipes are available.

Reviewed-by: Sun peng Li Sunpeng.Li@amd.com Acked-by: Brian Chang Brian.Chang@amd.com Signed-off-by: Tom Chung chiahsuan.chung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 7d69341acca0..9dbd965d8afb 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -1067,8 +1067,15 @@ static void disable_dangling_plane(struct dc *dc, struct dc_state *context) struct dc_stream_state *old_stream = dc->current_state->res_ctx.pipe_ctx[i].stream; bool should_disable = true; - bool pipe_split_change = - context->res_ctx.pipe_ctx[i].top_pipe != dc->current_state->res_ctx.pipe_ctx[i].top_pipe; + bool pipe_split_change = false; + + if ((context->res_ctx.pipe_ctx[i].top_pipe) && + (dc->current_state->res_ctx.pipe_ctx[i].top_pipe)) + pipe_split_change = context->res_ctx.pipe_ctx[i].top_pipe->pipe_idx != + dc->current_state->res_ctx.pipe_ctx[i].top_pipe->pipe_idx; + else + pipe_split_change = context->res_ctx.pipe_ctx[i].top_pipe != + dc->current_state->res_ctx.pipe_ctx[i].top_pipe;

for (j = 0; j < context->stream_count; j++) { if (old_stream == context->streams[j]) {

From: Harish Kasiviswanathan Harish.Kasiviswanathan@amd.com

[ Upstream commit 1af9add1f1512b10d9ce44ec7137612bc81ff069 ]

Was missing. Add it.

Signed-off-by: Harish Kasiviswanathan Harish.Kasiviswanathan@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/ih_v6_0.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/ih_v6_0.c b/drivers/gpu/drm/amd/amdgpu/ih_v6_0.c index 92dc60a9d209..085e613f3646 100644 --- a/drivers/gpu/drm/amd/amdgpu/ih_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/ih_v6_0.c @@ -727,6 +727,7 @@ static const struct amd_ip_funcs ih_v6_0_ip_funcs = { static const struct amdgpu_ih_funcs ih_v6_0_funcs = { .get_wptr = ih_v6_0_get_wptr, .decode_iv = amdgpu_ih_decode_iv_helper, + .decode_iv_ts = amdgpu_ih_decode_iv_ts_helper, .set_rptr = ih_v6_0_set_rptr };

From: Mukul Joshi mukul.joshi@amd.com

[ Upstream commit de8341ee3ce7316883e836a2c4e9bf01ab651e0f ]

There are no backing hardware registers for ih_soft ring. As a result, don't try to access hardware registers for read and write pointers when processing interrupts on the IH soft ring.

Signed-off-by: Mukul Joshi mukul.joshi@amd.com Acked-by: Christian König christian.koenig@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/navi10_ih.c | 7 ++++++- drivers/gpu/drm/amd/amdgpu/vega10_ih.c | 7 ++++++- drivers/gpu/drm/amd/amdgpu/vega20_ih.c | 7 ++++++- 3 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/navi10_ih.c b/drivers/gpu/drm/amd/amdgpu/navi10_ih.c index 4b5396d3e60f..eec13cb5bf75 100644 --- a/drivers/gpu/drm/amd/amdgpu/navi10_ih.c +++ b/drivers/gpu/drm/amd/amdgpu/navi10_ih.c @@ -409,9 +409,11 @@ static u32 navi10_ih_get_wptr(struct amdgpu_device *adev, u32 wptr, tmp; struct amdgpu_ih_regs *ih_regs;

- if (ih == &adev->irq.ih) { + if (ih == &adev->irq.ih || ih == &adev->irq.ih_soft) { /* Only ring0 supports writeback. On other rings fall back * to register-based code with overflow checking below. + * ih_soft ring doesn't have any backing hardware registers, + * update wptr and return. */ wptr = le32_to_cpu(*ih->wptr_cpu);

@@ -483,6 +485,9 @@ static void navi10_ih_set_rptr(struct amdgpu_device *adev, { struct amdgpu_ih_regs *ih_regs;

+ if (ih == &adev->irq.ih_soft) + return; + if (ih->use_doorbell) { /* XXX check if swapping is necessary on BE */ *ih->rptr_cpu = ih->rptr; diff --git a/drivers/gpu/drm/amd/amdgpu/vega10_ih.c b/drivers/gpu/drm/amd/amdgpu/vega10_ih.c index cdd599a08125..03b7066471f9 100644 --- a/drivers/gpu/drm/amd/amdgpu/vega10_ih.c +++ b/drivers/gpu/drm/amd/amdgpu/vega10_ih.c @@ -334,9 +334,11 @@ static u32 vega10_ih_get_wptr(struct amdgpu_device *adev, u32 wptr, tmp; struct amdgpu_ih_regs *ih_regs;

- if (ih == &adev->irq.ih) { + if (ih == &adev->irq.ih || ih == &adev->irq.ih_soft) { /* Only ring0 supports writeback. On other rings fall back * to register-based code with overflow checking below. + * ih_soft ring doesn't have any backing hardware registers, + * update wptr and return. */ wptr = le32_to_cpu(*ih->wptr_cpu);

@@ -409,6 +411,9 @@ static void vega10_ih_set_rptr(struct amdgpu_device *adev, { struct amdgpu_ih_regs *ih_regs;

+ if (ih == &adev->irq.ih_soft) + return; + if (ih->use_doorbell) { /* XXX check if swapping is necessary on BE */ *ih->rptr_cpu = ih->rptr; diff --git a/drivers/gpu/drm/amd/amdgpu/vega20_ih.c b/drivers/gpu/drm/amd/amdgpu/vega20_ih.c index 3b4eb8285943..2022ffbb8dba 100644 --- a/drivers/gpu/drm/amd/amdgpu/vega20_ih.c +++ b/drivers/gpu/drm/amd/amdgpu/vega20_ih.c @@ -385,9 +385,11 @@ static u32 vega20_ih_get_wptr(struct amdgpu_device *adev, u32 wptr, tmp; struct amdgpu_ih_regs *ih_regs;

- if (ih == &adev->irq.ih) { + if (ih == &adev->irq.ih || ih == &adev->irq.ih_soft) { /* Only ring0 supports writeback. On other rings fall back * to register-based code with overflow checking below. + * ih_soft ring doesn't have any backing hardware registers, + * update wptr and return. */ wptr = le32_to_cpu(*ih->wptr_cpu);

@@ -461,6 +463,9 @@ static void vega20_ih_set_rptr(struct amdgpu_device *adev, { struct amdgpu_ih_regs *ih_regs;

+ if (ih == &adev->irq.ih_soft) + return; + if (ih->use_doorbell) { /* XXX check if swapping is necessary on BE */ *ih->rptr_cpu = ih->rptr;

From: Florian Westphal fw@strlen.de

[ Upstream commit b71b7bfeac38c7a21c423ddafb29aa6258949df8 ]

"ns1" is a too generic name, use a random suffix to avoid errors when such a netns exists. Also allows to run multiple instances of the script in parallel.

Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/netfilter/nft_flowtable.sh | 246 +++++++++--------- 1 file changed, 128 insertions(+), 118 deletions(-)

diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh index d4ffebb989f8..c336e6c148d1 100755 --- a/tools/testing/selftests/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/netfilter/nft_flowtable.sh @@ -14,6 +14,11 @@ # nft_flowtable.sh -o8000 -l1500 -r2000 #

+sfx=$(mktemp -u "XXXXXXXX") +ns1="ns1-$sfx" +ns2="ns2-$sfx" +nsr1="nsr1-$sfx" +nsr2="nsr2-$sfx"

# Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -36,18 +41,17 @@ checktool (){ checktool "nft --version" "run test without nft tool" checktool "ip -Version" "run test without ip tool" checktool "which nc" "run test without nc (netcat)" -checktool "ip netns add nsr1" "create net namespace" +checktool "ip netns add $nsr1" "create net namespace $nsr1"

-ip netns add ns1 -ip netns add ns2 - -ip netns add nsr2 +ip netns add $ns1 +ip netns add $ns2 +ip netns add $nsr2

cleanup() { - for i in 1 2; do - ip netns del ns$i - ip netns del nsr$i - done + ip netns del $ns1 + ip netns del $ns2 + ip netns del $nsr1 + ip netns del $nsr2

rm -f "$ns1in" "$ns1out" rm -f "$ns2in" "$ns2out" @@ -59,22 +63,21 @@ trap cleanup EXIT

sysctl -q net.netfilter.nf_log_all_netns=1

-ip link add veth0 netns nsr1 type veth peer name eth0 netns ns1 -ip link add veth1 netns nsr1 type veth peer name veth0 netns nsr2 +ip link add veth0 netns $nsr1 type veth peer name eth0 netns $ns1 +ip link add veth1 netns $nsr1 type veth peer name veth0 netns $nsr2

-ip link add veth1 netns nsr2 type veth peer name eth0 netns ns2 +ip link add veth1 netns $nsr2 type veth peer name eth0 netns $ns2

for dev in lo veth0 veth1; do - for i in 1 2; do - ip -net nsr$i link set $dev up - done + ip -net $nsr1 link set $dev up + ip -net $nsr2 link set $dev up done

-ip -net nsr1 addr add 10.0.1.1/24 dev veth0 -ip -net nsr1 addr add dead:1::1/64 dev veth0 +ip -net $nsr1 addr add 10.0.1.1/24 dev veth0 +ip -net $nsr1 addr add dead:1::1/64 dev veth0

-ip -net nsr2 addr add 10.0.2.1/24 dev veth1 -ip -net nsr2 addr add dead:2::1/64 dev veth1 +ip -net $nsr2 addr add 10.0.2.1/24 dev veth1 +ip -net $nsr2 addr add dead:2::1/64 dev veth1

# set different MTUs so we need to push packets coming from ns1 (large MTU) # to ns2 (smaller MTU) to stack either to perform fragmentation (ip_no_pmtu_disc=1), @@ -106,49 +109,56 @@ do esac done

-if ! ip -net nsr1 link set veth0 mtu $omtu; then +if ! ip -net $nsr1 link set veth0 mtu $omtu; then exit 1 fi

-ip -net ns1 link set eth0 mtu $omtu +ip -net $ns1 link set eth0 mtu $omtu

-if ! ip -net nsr2 link set veth1 mtu $rmtu; then +if ! ip -net $nsr2 link set veth1 mtu $rmtu; then exit 1 fi

-ip -net ns2 link set eth0 mtu $rmtu +ip -net $ns2 link set eth0 mtu $rmtu

# transfer-net between nsr1 and nsr2. # these addresses are not used for connections. -ip -net nsr1 addr add 192.168.10.1/24 dev veth1 -ip -net nsr1 addr add fee1:2::1/64 dev veth1 - -ip -net nsr2 addr add 192.168.10.2/24 dev veth0 -ip -net nsr2 addr add fee1:2::2/64 dev veth0 - -for i in 1 2; do - ip netns exec nsr$i sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null - ip netns exec nsr$i sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null - - ip -net ns$i link set lo up - ip -net ns$i link set eth0 up - ip -net ns$i addr add 10.0.$i.99/24 dev eth0 - ip -net ns$i route add default via 10.0.$i.1 - ip -net ns$i addr add dead:$i::99/64 dev eth0 - ip -net ns$i route add default via dead:$i::1 - if ! ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then +ip -net $nsr1 addr add 192.168.10.1/24 dev veth1 +ip -net $nsr1 addr add fee1:2::1/64 dev veth1 + +ip -net $nsr2 addr add 192.168.10.2/24 dev veth0 +ip -net $nsr2 addr add fee1:2::2/64 dev veth0 + +for i in 0 1; do + ip netns exec $nsr1 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null + ip netns exec $nsr2 sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null +done + +for ns in $ns1 $ns2;do + ip -net $ns link set lo up + ip -net $ns link set eth0 up + + if ! ip netns exec $ns sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then echo "ERROR: Check Originator/Responder values (problem during address addition)" exit 1 fi - # don't set ip DF bit for first two tests - ip netns exec ns$i sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null + ip netns exec $ns sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null done

-ip -net nsr1 route add default via 192.168.10.2 -ip -net nsr2 route add default via 192.168.10.1 +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns2 addr add 10.0.2.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns2 route add default via 10.0.2.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0 +ip -net $ns2 addr add dead:2::99/64 dev eth0 +ip -net $ns1 route add default via dead:1::1 +ip -net $ns2 route add default via dead:2::1 + +ip -net $nsr1 route add default via 192.168.10.2 +ip -net $nsr2 route add default via 192.168.10.1

-ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF table inet filter { flowtable f1 { hook ingress priority 0 @@ -197,18 +207,18 @@ if [ $? -ne 0 ]; then fi

# test basic connectivity -if ! ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then - echo "ERROR: ns1 cannot reach ns2" 1>&2 +if ! ip netns exec $ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then + echo "ERROR: $ns1 cannot reach ns2" 1>&2 exit 1 fi

-if ! ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then - echo "ERROR: ns2 cannot reach ns1" 1>&2 +if ! ip netns exec $ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then + echo "ERROR: $ns2 cannot reach $ns1" 1>&2 exit 1 fi

if [ $ret -eq 0 ];then - echo "PASS: netns routing/connectivity: ns1 can reach ns2" + echo "PASS: netns routing/connectivity: $ns1 can reach $ns2" fi

ns1in=$(mktemp) @@ -312,24 +322,24 @@ make_file "$ns2in"

# First test: # No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed. -if test_tcp_forwarding ns1 ns2; then +if test_tcp_forwarding $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2" else echo "FAIL: flow offload for ns1/ns2:" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi

# delete default route, i.e. ns2 won't be able to reach ns1 and # will depend on ns1 being masqueraded in nsr1. # expect ns1 has nsr1 address. -ip -net ns2 route del default via 10.0.2.1 -ip -net ns2 route del default via dead:2::1 -ip -net ns2 route add 192.168.10.1 via 10.0.2.1 +ip -net $ns2 route del default via 10.0.2.1 +ip -net $ns2 route del default via dead:2::1 +ip -net $ns2 route add 192.168.10.1 via 10.0.2.1

# Second test: # Same, but with NAT enabled. -ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF table ip nat { chain prerouting { type nat hook prerouting priority 0; policy accept; @@ -343,47 +353,47 @@ table ip nat { } EOF

-if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with NAT" else echo "FAIL: flow offload for ns1/ns2 with NAT" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi

# Third test: # Same as second test, but with PMTU discovery enabled. -handle=$(ip netns exec nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d # -f 2) +handle=$(ip netns exec $nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d # -f 2)

-if ! ip netns exec nsr1 nft delete rule inet filter forward $handle; then +if ! ip netns exec $nsr1 nft delete rule inet filter forward $handle; then echo "FAIL: Could not delete large-packet accept rule" exit 1 fi

-ip netns exec ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null -ip netns exec ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec $ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null +ip netns exec $ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null

-if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with NAT and pmtu discovery" else echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset fi

# Another test: # Add bridge interface br0 to Router1, with NAT enabled. -ip -net nsr1 link add name br0 type bridge -ip -net nsr1 addr flush dev veth0 -ip -net nsr1 link set up dev veth0 -ip -net nsr1 link set veth0 master br0 -ip -net nsr1 addr add 10.0.1.1/24 dev br0 -ip -net nsr1 addr add dead:1::1/64 dev br0 -ip -net nsr1 link set up dev br0 +ip -net $nsr1 link add name br0 type bridge +ip -net $nsr1 addr flush dev veth0 +ip -net $nsr1 link set up dev veth0 +ip -net $nsr1 link set veth0 master br0 +ip -net $nsr1 addr add 10.0.1.1/24 dev br0 +ip -net $nsr1 addr add dead:1::1/64 dev br0 +ip -net $nsr1 link set up dev br0

-ip netns exec nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null +ip netns exec $nsr1 sysctl net.ipv4.conf.br0.forwarding=1 > /dev/null

# br0 with NAT enabled. -ip netns exec nsr1 nft -f - <<EOF +ip netns exec $nsr1 nft -f - <<EOF flush table ip nat table ip nat { chain prerouting { @@ -398,59 +408,59 @@ table ip nat { } EOF

-if test_tcp_forwarding_nat ns1 ns2; then +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with bridge NAT" else echo "FAIL: flow offload for ns1/ns2 with bridge NAT" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi

# Another test: # Add bridge interface br0 to Router1, with NAT and VLAN. -ip -net nsr1 link set veth0 nomaster -ip -net nsr1 link set down dev veth0 -ip -net nsr1 link add link veth0 name veth0.10 type vlan id 10 -ip -net nsr1 link set up dev veth0 -ip -net nsr1 link set up dev veth0.10 -ip -net nsr1 link set veth0.10 master br0 - -ip -net ns1 addr flush dev eth0 -ip -net ns1 link add link eth0 name eth0.10 type vlan id 10 -ip -net ns1 link set eth0 up -ip -net ns1 link set eth0.10 up -ip -net ns1 addr add 10.0.1.99/24 dev eth0.10 -ip -net ns1 route add default via 10.0.1.1 -ip -net ns1 addr add dead:1::99/64 dev eth0.10 - -if test_tcp_forwarding_nat ns1 ns2; then +ip -net $nsr1 link set veth0 nomaster +ip -net $nsr1 link set down dev veth0 +ip -net $nsr1 link add link veth0 name veth0.10 type vlan id 10 +ip -net $nsr1 link set up dev veth0 +ip -net $nsr1 link set up dev veth0.10 +ip -net $nsr1 link set veth0.10 master br0 + +ip -net $ns1 addr flush dev eth0 +ip -net $ns1 link add link eth0 name eth0.10 type vlan id 10 +ip -net $ns1 link set eth0 up +ip -net $ns1 link set eth0.10 up +ip -net $ns1 addr add 10.0.1.99/24 dev eth0.10 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0.10 + +if test_tcp_forwarding_nat $ns1 $ns2; then echo "PASS: flow offloaded for ns1/ns2 with bridge NAT and VLAN" else echo "FAIL: flow offload for ns1/ns2 with bridge NAT and VLAN" 1>&2 - ip netns exec nsr1 nft list ruleset + ip netns exec $nsr1 nft list ruleset ret=1 fi

# restore test topology (remove bridge and VLAN) -ip -net nsr1 link set veth0 nomaster -ip -net nsr1 link set veth0 down -ip -net nsr1 link set veth0.10 down -ip -net nsr1 link delete veth0.10 type vlan -ip -net nsr1 link delete br0 type bridge -ip -net ns1 addr flush dev eth0.10 -ip -net ns1 link set eth0.10 down -ip -net ns1 link set eth0 down -ip -net ns1 link delete eth0.10 type vlan +ip -net $nsr1 link set veth0 nomaster +ip -net $nsr1 link set veth0 down +ip -net $nsr1 link set veth0.10 down +ip -net $nsr1 link delete veth0.10 type vlan +ip -net $nsr1 link delete br0 type bridge +ip -net $ns1 addr flush dev eth0.10 +ip -net $ns1 link set eth0.10 down +ip -net $ns1 link set eth0 down +ip -net $ns1 link delete eth0.10 type vlan

# restore address in ns1 and nsr1 -ip -net ns1 link set eth0 up -ip -net ns1 addr add 10.0.1.99/24 dev eth0 -ip -net ns1 route add default via 10.0.1.1 -ip -net ns1 addr add dead:1::99/64 dev eth0 -ip -net ns1 route add default via dead:1::1 -ip -net nsr1 addr add 10.0.1.1/24 dev veth0 -ip -net nsr1 addr add dead:1::1/64 dev veth0 -ip -net nsr1 link set up dev veth0 +ip -net $ns1 link set eth0 up +ip -net $ns1 addr add 10.0.1.99/24 dev eth0 +ip -net $ns1 route add default via 10.0.1.1 +ip -net $ns1 addr add dead:1::99/64 dev eth0 +ip -net $ns1 route add default via dead:1::1 +ip -net $nsr1 addr add 10.0.1.1/24 dev veth0 +ip -net $nsr1 addr add dead:1::1/64 dev veth0 +ip -net $nsr1 link set up dev veth0

KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1) KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1) @@ -480,23 +490,23 @@ do_esp() {

}

-do_esp nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2 +do_esp $nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2

-do_esp nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1 +do_esp $nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1

-ip netns exec nsr1 nft delete table ip nat +ip netns exec $nsr1 nft delete table ip nat

# restore default routes -ip -net ns2 route del 192.168.10.1 via 10.0.2.1 -ip -net ns2 route add default via 10.0.2.1 -ip -net ns2 route add default via dead:2::1 +ip -net $ns2 route del 192.168.10.1 via 10.0.2.1 +ip -net $ns2 route add default via 10.0.2.1 +ip -net $ns2 route add default via dead:2::1

-if test_tcp_forwarding ns1 ns2; then +if test_tcp_forwarding $ns1 $ns2; then echo "PASS: ipsec tunnel mode for ns1/ns2" else echo "FAIL: ipsec tunnel mode for ns1/ns2" - ip netns exec nsr1 nft list ruleset 1>&2 - ip netns exec nsr1 cat /proc/net/xfrm_stat 1>&2 + ip netns exec $nsr1 nft list ruleset 1>&2 + ip netns exec $nsr1 cat /proc/net/xfrm_stat 1>&2 fi

exit $ret

From: Stefan Binding sbinding@opensource.cirrus.com

[ Upstream commit 1ff954f9ab054675b9eb02dd14add8f7aa376d71 ]

Add 4 new Dolphin Systems, same configuration as older systems.

Signed-off-by: Stefan Binding sbinding@opensource.cirrus.com Link: https://lore.kernel.org/r/20220816151901.1398007-1-sbinding@opensource.cirru... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_cs8409-tables.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/sound/pci/hda/patch_cs8409-tables.c b/sound/pci/hda/patch_cs8409-tables.c index 4f4cc8215917..5b140301ca66 100644 --- a/sound/pci/hda/patch_cs8409-tables.c +++ b/sound/pci/hda/patch_cs8409-tables.c @@ -546,6 +546,10 @@ const struct snd_pci_quirk cs8409_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0BD6, "Dolphin", CS8409_DOLPHIN), SND_PCI_QUIRK(0x1028, 0x0BD7, "Dolphin", CS8409_DOLPHIN), SND_PCI_QUIRK(0x1028, 0x0BD8, "Dolphin", CS8409_DOLPHIN), + SND_PCI_QUIRK(0x1028, 0x0C43, "Dolphin", CS8409_DOLPHIN), + SND_PCI_QUIRK(0x1028, 0x0C50, "Dolphin", CS8409_DOLPHIN), + SND_PCI_QUIRK(0x1028, 0x0C51, "Dolphin", CS8409_DOLPHIN), + SND_PCI_QUIRK(0x1028, 0x0C52, "Dolphin", CS8409_DOLPHIN), {} /* terminator */ };

From: Josef Bacik josef@toxicpanda.com

[ Upstream commit b40130b23ca4a08c5785d5a3559805916bddba3c ]

We have been hitting the following lockdep splat with btrfs/187 recently

WARNING: possible circular locking dependency detected 5.19.0-rc8+ #775 Not tainted ------------------------------------------------------ btrfs/752500 is trying to acquire lock: ffff97e1875a97b8 (btrfs-treloc-02#2){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110

but task is already holding lock: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (btrfs-tree-01/1){+.+.}-{3:3}: down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_init_new_buffer+0x7d/0x2c0 btrfs_alloc_tree_block+0x120/0x3b0 __btrfs_cow_block+0x136/0x600 btrfs_cow_block+0x10b/0x230 btrfs_search_slot+0x53b/0xb70 btrfs_lookup_inode+0x2a/0xa0 __btrfs_update_delayed_inode+0x5f/0x280 btrfs_async_run_delayed_root+0x24c/0x290 btrfs_work_helper+0xf2/0x3e0 process_one_work+0x271/0x590 worker_thread+0x52/0x3b0 kthread+0xf0/0x120 ret_from_fork+0x1f/0x30

-> #1 (btrfs-tree-01){++++}-{3:3}: down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_search_slot+0x3c3/0xb70 do_relocation+0x10c/0x6b0 relocate_tree_blocks+0x317/0x6d0 relocate_block_group+0x1f1/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

-> #0 (btrfs-treloc-02#2){+.+.}-{3:3}: __lock_acquire+0x1122/0x1e10 lock_acquire+0xc2/0x2d0 down_write_nested+0x41/0x80 __btrfs_tree_lock+0x24/0x110 btrfs_lock_root_node+0x31/0x50 btrfs_search_slot+0x1cb/0xb70 replace_path+0x541/0x9f0 merge_reloc_root+0x1d6/0x610 merge_reloc_roots+0xe2/0x260 relocate_block_group+0x2c8/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

other info that might help us debug this:

Chain exists of: btrfs-treloc-02#2 --> btrfs-tree-01 --> btrfs-tree-01/1

Possible unsafe locking scenario:

CPU0 CPU1 ---- ---- lock(btrfs-tree-01/1); lock(btrfs-tree-01); lock(btrfs-tree-01/1); lock(btrfs-treloc-02#2);

*** DEADLOCK ***

7 locks held by btrfs/752500: #0: ffff97e292fdf460 (sb_writers#12){.+.+}-{0:0}, at: btrfs_ioctl+0x208/0x2c90 #1: ffff97e284c02050 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0x55f/0xe40 #2: ffff97e284c00878 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x236/0x400 #3: ffff97e292fdf650 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xef/0x610 #4: ffff97e284c02378 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0 #5: ffff97e284c023a0 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x1a8/0x5a0 #6: ffff97e1875a9278 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x24/0x110

stack backtrace: CPU: 1 PID: 752500 Comm: btrfs Not tainted 5.19.0-rc8+ #775 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace:

dump_stack_lvl+0x56/0x73 check_noncircular+0xd6/0x100 ? lock_is_held_type+0xe2/0x140 __lock_acquire+0x1122/0x1e10 lock_acquire+0xc2/0x2d0 ? __btrfs_tree_lock+0x24/0x110 down_write_nested+0x41/0x80 ? __btrfs_tree_lock+0x24/0x110 __btrfs_tree_lock+0x24/0x110 btrfs_lock_root_node+0x31/0x50 btrfs_search_slot+0x1cb/0xb70 ? lock_release+0x137/0x2d0 ? _raw_spin_unlock+0x29/0x50 ? release_extent_buffer+0x128/0x180 replace_path+0x541/0x9f0 merge_reloc_root+0x1d6/0x610 merge_reloc_roots+0xe2/0x260 relocate_block_group+0x2c8/0x560 btrfs_relocate_block_group+0x23e/0x400 btrfs_relocate_chunk+0x4c/0x140 btrfs_balance+0x755/0xe40 btrfs_ioctl+0x1ea2/0x2c90 ? lock_is_held_type+0xe2/0x140 ? lock_is_held_type+0xe2/0x140 ? __x64_sys_ioctl+0x88/0xc0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

This isn't necessarily new, it's just tricky to hit in practice. There are two competing things going on here. With relocation we create a snapshot of every fs tree with a reloc tree. Any extent buffers that get initialized here are initialized with the reloc root lockdep key. However since it is a snapshot, any blocks that are currently in cache that originally belonged to the fs tree will have the normal tree lockdep key set. This creates the lock dependency of

reloc tree -> normal tree

for the extent buffer locking during the first phase of the relocation as we walk down the reloc root to relocate blocks.

However this is problematic because the final phase of the relocation is merging the reloc root into the original fs root. This involves searching down to any keys that exist in the original fs root and then swapping the relocated block and the original fs root block. We have to search down to the fs root first, and then go search the reloc root for the block we need to replace. This creates the dependency of

normal tree -> reloc tree

which is why lockdep complains.

Additionally even if we were to fix this particular mismatch with a different nesting for the merge case, we're still slotting in a block that has a owner of the reloc root objectid into a normal tree, so that block will have its lockdep key set to the tree reloc root, and create a lockdep splat later on when we wander into that block from the fs root.

Unfortunately the only solution here is to make sure we do not set the lockdep key to the reloc tree lockdep key normally, and then reset any blocks we wander into from the reloc root when we're doing the merged.

This solves the problem of having mixed tree reloc keys intermixed with normal tree keys, and then allows us to make sure in the merge case we maintain the lock order of

normal tree -> reloc tree

We handle this by setting a bit on the reloc root when we do the search for the block we want to relocate, and any block we search into or COW at that point gets set to the reloc tree key. This works correctly because we only ever COW down to the parent node, so we aren't resetting the key for the block we're linking into the fs root.

With this patch we no longer have the lockdep splat in btrfs/187.

Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/ctree.c | 3 +++ fs/btrfs/ctree.h | 2 ++ fs/btrfs/extent-tree.c | 18 +++++++++++++++++- fs/btrfs/extent_io.c | 11 ++++++++++- fs/btrfs/locking.c | 11 +++++++++++ fs/btrfs/locking.h | 5 +++++ fs/btrfs/relocation.c | 2 ++ 7 files changed, 50 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 6e556031a8f3..ebfa35fe1c38 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -2075,6 +2075,9 @@ int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root *root,

if (!p->skip_locking) { level = btrfs_header_level(b); + + btrfs_maybe_reset_lockdep_class(root, b); + if (level <= write_lock_level) { btrfs_tree_lock(b); p->locks[level] = BTRFS_WRITE_LOCK; diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 3a51d0c13a95..d1f55a0e8a28 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1147,6 +1147,8 @@ enum { BTRFS_ROOT_ORPHAN_CLEANUP, /* This root has a drop operation that was started previously. */ BTRFS_ROOT_UNFINISHED_DROP, + /* This reloc root needs to have its buffers lockdep class reset. */ + BTRFS_ROOT_RESET_LOCKDEP_CLASS, };

static inline void btrfs_wake_unfinished_drop(struct btrfs_fs_info *fs_info) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index f2c79838ebe5..3096829f6291 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4883,6 +4883,7 @@ btrfs_init_new_buffer(struct btrfs_trans_handle *trans, struct btrfs_root *root, { struct btrfs_fs_info *fs_info = root->fs_info; struct extent_buffer *buf; + u64 lockdep_owner = owner;

buf = btrfs_find_create_tree_block(fs_info, bytenr, owner, level); if (IS_ERR(buf)) @@ -4901,12 +4902,27 @@ btrfs_init_new_buffer(struct btrfs_trans_handle *trans, struct btrfs_root *root, return ERR_PTR(-EUCLEAN); }

+ /* + * The reloc trees are just snapshots, so we need them to appear to be + * just like any other fs tree WRT lockdep. + * + * The exception however is in replace_path() in relocation, where we + * hold the lock on the original fs root and then search for the reloc + * root. At that point we need to make sure any reloc root buffers are + * set to the BTRFS_TREE_RELOC_OBJECTID lockdep class in order to make + * lockdep happy. + */ + if (lockdep_owner == BTRFS_TREE_RELOC_OBJECTID && + !test_bit(BTRFS_ROOT_RESET_LOCKDEP_CLASS, &root->state)) + lockdep_owner = BTRFS_FS_TREE_OBJECTID; + /* * This needs to stay, because we could allocate a freed block from an * old tree into a new tree, so we need to make sure this new block is * set to the appropriate level and owner. */ - btrfs_set_buffer_lockdep_class(owner, buf, level); + btrfs_set_buffer_lockdep_class(lockdep_owner, buf, level); + __btrfs_tree_lock(buf, nest); btrfs_clean_tree_block(buf); clear_bit(EXTENT_BUFFER_STALE, &buf->bflags); diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index cda25018ebd7..5785ed241f6f 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -6228,6 +6228,7 @@ struct extent_buffer *alloc_extent_buffer(struct btrfs_fs_info *fs_info, struct extent_buffer *exists = NULL; struct page *p; struct address_space *mapping = fs_info->btree_inode->i_mapping; + u64 lockdep_owner = owner_root; int uptodate = 1; int ret;

@@ -6252,7 +6253,15 @@ struct extent_buffer *alloc_extent_buffer(struct btrfs_fs_info *fs_info, eb = __alloc_extent_buffer(fs_info, start, len); if (!eb) return ERR_PTR(-ENOMEM); - btrfs_set_buffer_lockdep_class(owner_root, eb, level); + + /* + * The reloc trees are just snapshots, so we need them to appear to be + * just like any other fs tree WRT lockdep. + */ + if (lockdep_owner == BTRFS_TREE_RELOC_OBJECTID) + lockdep_owner = BTRFS_FS_TREE_OBJECTID; + + btrfs_set_buffer_lockdep_class(lockdep_owner, eb, level);

num_pages = num_extent_pages(eb); for (i = 0; i < num_pages; i++, index++) { diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c index 5747c63929df..9063072b399b 100644 --- a/fs/btrfs/locking.c +++ b/fs/btrfs/locking.c @@ -91,6 +91,13 @@ void btrfs_set_buffer_lockdep_class(u64 objectid, struct extent_buffer *eb, int lockdep_set_class_and_name(&eb->lock, &ks->keys[level], ks->names[level]); }

+void btrfs_maybe_reset_lockdep_class(struct btrfs_root *root, struct extent_buffer *eb) +{ + if (test_bit(BTRFS_ROOT_RESET_LOCKDEP_CLASS, &root->state)) + btrfs_set_buffer_lockdep_class(root->root_key.objectid, + eb, btrfs_header_level(eb)); +} + #endif

/* @@ -244,6 +251,8 @@ struct extent_buffer *btrfs_lock_root_node(struct btrfs_root *root)

while (1) { eb = btrfs_root_node(root); + + btrfs_maybe_reset_lockdep_class(root, eb); btrfs_tree_lock(eb); if (eb == root->node) break; @@ -265,6 +274,8 @@ struct extent_buffer *btrfs_read_lock_root_node(struct btrfs_root *root)

while (1) { eb = btrfs_root_node(root); + + btrfs_maybe_reset_lockdep_class(root, eb); btrfs_tree_read_lock(eb); if (eb == root->node) break; diff --git a/fs/btrfs/locking.h b/fs/btrfs/locking.h index b21372cab840..ab268be09bb5 100644 --- a/fs/btrfs/locking.h +++ b/fs/btrfs/locking.h @@ -133,11 +133,16 @@ void btrfs_drew_read_unlock(struct btrfs_drew_lock *lock);

#ifdef CONFIG_DEBUG_LOCK_ALLOC void btrfs_set_buffer_lockdep_class(u64 objectid, struct extent_buffer *eb, int level); +void btrfs_maybe_reset_lockdep_class(struct btrfs_root *root, struct extent_buffer *eb); #else static inline void btrfs_set_buffer_lockdep_class(u64 objectid, struct extent_buffer *eb, int level) { } +static inline void btrfs_maybe_reset_lockdep_class(struct btrfs_root *root, + struct extent_buffer *eb) +{ +} #endif

#endif diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index a6dc827e75af..6f8c3b23b673 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1326,7 +1326,9 @@ int replace_path(struct btrfs_trans_handle *trans, struct reloc_control *rc, btrfs_release_path(path);

path->lowest_level = level; + set_bit(BTRFS_ROOT_RESET_LOCKDEP_CLASS, &src->state); ret = btrfs_search_slot(trans, src, &key, path, 0, 1); + clear_bit(BTRFS_ROOT_RESET_LOCKDEP_CLASS, &src->state); path->lowest_level = 0; if (ret) { if (ret > 0)

From: Yang Jihong yangjihong1@huawei.com

[ Upstream commit c3b0f72e805f0801f05fa2aa52011c4bfc694c44 ]

ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails:

register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list.

When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ...

If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer:

is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!

Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list.

Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.com

Suggested-by: Steven Rostedt rostedt@goodmis.org Signed-off-by: Yang Jihong yangjihong1@huawei.com Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/ftrace.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 601ccf1b2f09..4baa99363b16 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2937,6 +2937,16 @@ int ftrace_startup(struct ftrace_ops *ops, int command)

ftrace_startup_enable(command);

+ /* + * If ftrace is in an undefined state, we just remove ops from list + * to prevent the NULL pointer, instead of totally rolling it back and + * free trampoline, because those actions could cause further damage. + */ + if (unlikely(ftrace_disabled)) { + __unregister_ftrace_function(ops); + return -ENODEV; + } + ops->flags &= ~FTRACE_OPS_FL_ADDING;

return 0;