6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner tglx@linutronix.de

[ Upstream commit 4b30051c4864234ec57290c3d142db7c88f10d8a ]

Module insertion invokes static_call_add_module() to initialize the static calls in a module. static_call_add_module() invokes __static_call_init(), which allocates a struct static_call_mod to either encapsulate the built-in static call sites of the associated key into it so further modules can be added or to append the module to the module chain.

If that allocation fails the function returns with an error code and the module core invokes static_call_del_module() to clean up eventually added static_call_mod entries.

This works correctly, when all keys used by the module were converted over to a module chain before the failure. If not then static_call_del_module() causes a #GP as it blindly assumes that key::mods points to a valid struct static_call_mod.

The problem is that key::mods is not a individual struct member of struct static_call_key, it's part of a union to save space:

union { /* bit 0: 0 = mods, 1 = sites */ unsigned long type; struct static_call_mod *mods; struct static_call_site *sites; };

key::sites is a pointer to the list of built-in usage sites of the static call. The type of the pointer is differentiated by bit 0. A mods pointer has the bit clear, the sites pointer has the bit set.

As static_call_del_module() blidly assumes that the pointer is a valid static_call_mod type, it fails to check for this failure case and dereferences the pointer to the list of built-in call sites, which is obviously bogus.

Cure it by checking whether the key has a sites or a mods pointer.

If it's a sites pointer then the key is not to be touched. As the sites are walked in the same order as in __static_call_init() the site walk can be terminated because all subsequent sites have not been touched by the init code due to the error exit.

If it was converted before the allocation fail, then the inner loop which searches for a module match will find nothing.

A fail in the second allocation in __static_call_init() is harmless and does not require special treatment. The first allocation succeeded and converted the key to a module chain. That first entry has mod::mod == NULL and mod::next == NULL, so the inner loop of static_call_del_module() will neither find a module match nor a module chain. The next site in the walk was either already converted, but can't match the module, or it will exit the outer loop because it has a static_call_site pointer and not a static_call_mod pointer.

Fixes: 9183c3f9ed71 ("static_call: Add inline static call infrastructure") Closes: https://lore.kernel.org/all/20230915082126.4187913-1-ruanjinjie@huawei.com Reported-by: Jinjie Ruan ruanjinjie@huawei.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Tested-by: Jinjie Ruan ruanjinjie@huawei.com Link: https://lore.kernel.org/r/87zfon6b0s.ffs@tglx Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/static_call_inline.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/kernel/static_call_inline.c b/kernel/static_call_inline.c index 639397b5491ca..7bb0962b52291 100644 --- a/kernel/static_call_inline.c +++ b/kernel/static_call_inline.c @@ -411,6 +411,17 @@ static void static_call_del_module(struct module *mod)

for (site = start; site < stop; site++) { key = static_call_key(site); + + /* + * If the key was not updated due to a memory allocation + * failure in __static_call_init() then treating key::sites + * as key::mods in the code below would cause random memory + * access and #GP. In that case all subsequent sites have + * not been touched either, so stop iterating. + */ + if (!static_call_key_has_mods(key)) + break; + if (key == prev_key) continue;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner tglx@linutronix.de

[ Upstream commit 9bc2ff871f00437ad2f10c1eceff51aaa72b478f ]

Make the code more obvious and add proper comments to avoid future head scratching.

Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lkml.kernel.org/r/20240610124406.548322963@linutronix.de Stable-dep-of: 1d7f856c2ca4 ("jump_label: Fix static_key_slow_dec() yet again") Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/jump_label.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/kernel/jump_label.c b/kernel/jump_label.c index c6ac0d0377d72..781a1298ce2c2 100644 --- a/kernel/jump_label.c +++ b/kernel/jump_label.c @@ -159,22 +159,24 @@ bool static_key_slow_inc_cpuslocked(struct static_key *key) if (static_key_fast_inc_not_disabled(key)) return true;

- jump_label_lock(); - if (atomic_read(&key->enabled) == 0) { - atomic_set(&key->enabled, -1); + guard(mutex)(&jump_label_mutex); + /* Try to mark it as 'enabling in progress. */ + if (!atomic_cmpxchg(&key->enabled, 0, -1)) { jump_label_update(key); /* - * Ensure that if the above cmpxchg loop observes our positive - * value, it must also observe all the text changes. + * Ensure that when static_key_fast_inc_not_disabled() or + * static_key_slow_try_dec() observe the positive value, + * they must also observe all the text changes. */ atomic_set_release(&key->enabled, 1); } else { - if (WARN_ON_ONCE(!static_key_fast_inc_not_disabled(key))) { - jump_label_unlock(); + /* + * While holding the mutex this should never observe + * anything else than a value >= 1 and succeed + */ + if (WARN_ON_ONCE(!static_key_fast_inc_not_disabled(key))) return false; - } } - jump_label_unlock(); return true; }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafael Rocha rrochavi@fnal.gov

[ Upstream commit 3d882cca73be830549833517ddccb3ac4668c04e ]

A previous change was introduced to prevent data loss during a power-on reset when a tape is present inside the drive. This commit set the "pos_unknown" flag to true to avoid operations that could compromise data by performing actions from an untracked position. The relevant change is commit 9604eea5bd3a ("scsi: st: Add third party poweron reset handling")

As a consequence of this change, a new issue has surfaced: the driver now returns an "Input/output error" even for empty drives when the drive, host, or bus is reset. This issue stems from the "flush_buffer" function, which first checks whether the "pos_unknown" flag is set. If the flag is set, the user will encounter an "Input/output error" until the tape position is known again. This behavior differs from the previous implementation, where empty drives were not affected at system start up time, allowing tape software to send commands to the driver to retrieve the drive's status and other information.

The current behavior prioritizes the "pos_unknown" flag over the "ST_NO_TAPE" status, leading to issues for software that detects drives during system startup. This software will receive an "Input/output error" until a tape is loaded and its position is known.

To resolve this, the "ST_NO_TAPE" status should take priority when the drive is empty, allowing communication with the drive following a power-on reset. At the same time, the change should continue to protect data by maintaining the "pos_unknown" flag when the drive contains a tape and its position is unknown.

Signed-off-by: Rafael Rocha rrochavi@fnal.gov Link: https://lore.kernel.org/r/20240905173921.10944-1-rrochavi@fnal.gov Fixes: 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") Acked-by: Kai Mäkisara kai.makisara@kolumbus.fi Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/st.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 0d8ce1a92168c..d50bad3a2ce92 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -834,6 +834,9 @@ static int flush_buffer(struct scsi_tape *STp, int seek_next) int backspace, result; struct st_partstat *STps;

+ if (STp->ready != ST_READY) + return 0; + /* * If there was a bus reset, block further access * to this device. @@ -841,8 +844,6 @@ static int flush_buffer(struct scsi_tape *STp, int seek_next) if (STp->pos_unknown) return (-EIO);

- if (STp->ready != ST_READY) - return 0; STps = &(STp->ps[STp->partition]); if (STps->rw == ST_WRITING) /* Writing */ return st_flush_write_buffer(STp);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Imre Deak imre.deak@intel.com

[ Upstream commit ec2231b8dd2dc515912ff7816c420153b4a95e92 ]

Panel Self Refresh on eDP requires the AUX IO power to be enabled whenever the output (main link) is enabled. This is required by the AUX_PHY_WAKE/ML_PHY_LOCK signaling initiated by the HW automatically to re-enable the main link after it got disabled in power saving states (see eDP v1.4b, sections 5.1, 6.1.3.3.1.1).

The Panel Replay mode on non-eDP outputs on the other hand is only supported by keeping the main link active, thus not requiring the above AUX_PHY_WAKE/ML_PHY_LOCK signaling (eDP v1.4b, section 6.1.3.3.1.2). Thus enabling the AUX IO power for this case is not required either.

Based on the above enable the AUX IO power only for eDP/PSR outputs.

Bspec: 49274, 53370

v2: - Add a TODO comment to adjust the requirement for AUX IO based on whether the ALPM/main-link off mode gets enabled. (Rodrigo)

Cc: Animesh Manna animesh.manna@intel.com Fixes: b8cf5b5d266e ("drm/i915/panelreplay: Initializaton and compute config for panel replay") Reviewed-by: Rodrigo Vivi rodrigo.vivi@intel.com Signed-off-by: Imre Deak imre.deak@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20240910111847.2995725-1-imre.... (cherry picked from commit f7c2ed9d4ce80a2570c492825de239dc8b500f2e) Signed-off-by: Joonas Lahtinen joonas.lahtinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/i915/display/intel_ddi.c | 2 +- drivers/gpu/drm/i915/display/intel_psr.c | 19 +++++++++++++++++++ drivers/gpu/drm/i915/display/intel_psr.h | 2 ++ 3 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 6bff169fa8d4c..f92c46297ec4b 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -908,7 +908,7 @@ intel_ddi_main_link_aux_domain(struct intel_digital_port *dig_port, * instead of a specific AUX_IO_<port> reference without powering up any * extra wells. */ - if (intel_encoder_can_psr(&dig_port->base)) + if (intel_psr_needs_aux_io_power(&dig_port->base, crtc_state)) return intel_display_power_aux_io_domain(i915, dig_port->aux_ch); else if (DISPLAY_VER(i915) < 14 && (intel_crtc_has_dp_encoder(crtc_state) || diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c index 7173ffc7c66c1..857f776e55509 100644 --- a/drivers/gpu/drm/i915/display/intel_psr.c +++ b/drivers/gpu/drm/i915/display/intel_psr.c @@ -201,6 +201,25 @@ bool intel_encoder_can_psr(struct intel_encoder *encoder) return false; }

+bool intel_psr_needs_aux_io_power(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + /* + * For PSR/PR modes only eDP requires the AUX IO power to be enabled whenever + * the output is enabled. For non-eDP outputs the main link is always + * on, hence it doesn't require the HW initiated AUX wake-up signaling used + * for eDP. + * + * TODO: + * - Consider leaving AUX IO disabled for eDP / PR as well, in case + * the ALPM with main-link off mode is not enabled. + * - Leave AUX IO enabled for DP / PR, once support for ALPM with + * main-link off mode is added for it and this mode gets enabled. + */ + return intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP) && + intel_encoder_can_psr(encoder); +} + static bool psr_global_enabled(struct intel_dp *intel_dp) { struct intel_connector *connector = intel_dp->attached_connector; diff --git a/drivers/gpu/drm/i915/display/intel_psr.h b/drivers/gpu/drm/i915/display/intel_psr.h index d483c85870e1d..e719f548e1606 100644 --- a/drivers/gpu/drm/i915/display/intel_psr.h +++ b/drivers/gpu/drm/i915/display/intel_psr.h @@ -25,6 +25,8 @@ struct intel_plane_state; (intel_dp)->psr.source_panel_replay_support)

bool intel_encoder_can_psr(struct intel_encoder *encoder); +bool intel_psr_needs_aux_io_power(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state); void intel_psr_init_dpcd(struct intel_dp *intel_dp); void intel_psr_enable_sink(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tobias Jakobi tjakobi@math.uni-bielefeld.de

[ Upstream commit e7d4e1438533abe448813bdc45691f9c230aa307 ]

As set_drr() is called from IRQ context, it can happen that the pipe context has been nulled by dc_state_destruct().

Apply the same protection here that is already present for dcn35_set_drr() and dcn10_set_drr(). I.e. fetch the tg pointer first (to avoid a race with dc_state_destruct()), and then check the local copy before using it.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Tobias Jakobi tjakobi@math.uni-bielefeld.de Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../amd/display/dc/hwss/dce110/dce110_hwseq.c | 21 ++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c index e9e9f80a02a77..542d669bf5e30 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c @@ -2020,13 +2020,20 @@ static void set_drr(struct pipe_ctx **pipe_ctx, * as well. */ for (i = 0; i < num_pipes; i++) { - pipe_ctx[i]->stream_res.tg->funcs->set_drr( - pipe_ctx[i]->stream_res.tg, &params); - - if (adjust.v_total_max != 0 && adjust.v_total_min != 0) - pipe_ctx[i]->stream_res.tg->funcs->set_static_screen_control( - pipe_ctx[i]->stream_res.tg, - event_triggers, num_frames); + /* dc_state_destruct() might null the stream resources, so fetch tg + * here first to avoid a race condition. The lifetime of the pointee + * itself (the timing_generator object) is not a problem here. + */ + struct timing_generator *tg = pipe_ctx[i]->stream_res.tg; + + if ((tg != NULL) && tg->funcs) { + if (tg->funcs->set_drr) + tg->funcs->set_drr(tg, &params); + if (adjust.v_total_max != 0 && adjust.v_total_min != 0) + if (tg->funcs->set_static_screen_control) + tg->funcs->set_static_screen_control( + tg, event_triggers, num_frames); + } } }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Liao Chen liaochen4@huawei.com

[ Upstream commit e92d87c9c5d769e4cb1dd7c90faa38dddd7e52e3 ]

MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module properly autoloaded based on the alias from of_device_id table. It should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match', just fix it.

Fixes: f70ed3b5dc8b ("mailbox: rockchip: Add Rockchip mailbox driver") Signed-off-by: Liao Chen liaochen4@huawei.com Reviewed-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Jassi Brar jassisinghbrar@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mailbox/rockchip-mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mailbox/rockchip-mailbox.c b/drivers/mailbox/rockchip-mailbox.c index 8ffad059e8984..4d966cb2ed036 100644 --- a/drivers/mailbox/rockchip-mailbox.c +++ b/drivers/mailbox/rockchip-mailbox.c @@ -159,7 +159,7 @@ static const struct of_device_id rockchip_mbox_of_match[] = { { .compatible = "rockchip,rk3368-mailbox", .data = &rk3368_drv_data}, { }, }; -MODULE_DEVICE_TABLE(of, rockchp_mbox_of_match); +MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match);

static int rockchip_mbox_probe(struct platform_device *pdev) {

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luis Henriques (SUSE) luis.henriques@linux.dev

[ Upstream commit d97079e97eab20e08afc507f2bed4501e2824717 ]

The cap_auths that are allocated during an MDS session opening are never released, causing a memory leak detected by kmemleak. Fix this by freeing the memory allocated when shutting down the MDS client.

Fixes: 1d17de9534cb ("ceph: save cap_auths in MDS client when session is opened") Signed-off-by: Luis Henriques (SUSE) luis.henriques@linux.dev Reviewed-by: Xiubo Li xiubli@redhat.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/mds_client.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index c2157f6e0c698..d37e9ea571137 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -6011,6 +6011,18 @@ static void ceph_mdsc_stop(struct ceph_mds_client *mdsc) ceph_mdsmap_destroy(mdsc->mdsmap); kfree(mdsc->sessions); ceph_caps_finalize(mdsc); + + if (mdsc->s_cap_auths) { + int i; + + for (i = 0; i < mdsc->s_cap_auths_num; i++) { + kfree(mdsc->s_cap_auths[i].match.gids); + kfree(mdsc->s_cap_auths[i].match.path); + kfree(mdsc->s_cap_auths[i].match.fs_name); + } + kfree(mdsc->s_cap_auths); + } + ceph_pool_perm_destroy(mdsc); }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä ville.syrjala@linux.intel.com

[ Upstream commit e860513f56d8428fcb2bd0282ac8ab691a53fc6c ]

intel_dp_init_connector() is no place for detecting stuff via DPCD (except perhaps for eDP). Move the colorimetry stuff into a more appropriate place.

Cc: Jouni Högander jouni.hogander@intel.com Fixes: 00076671a648 ("drm/i915/display: Move colorimetry_support from intel_psr to intel_dp") Signed-off-by: Ville Syrjälä ville.syrjala@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20240918190441.29071-1-ville.s... Reviewed-by: Jouni Högander jouni.hogander@intel.com (cherry picked from commit 35dba4834bded843d5416e8caadfe82bd0ce1904) Signed-off-by: Joonas Lahtinen joonas.lahtinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/i915/display/intel_dp.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index a7d91ca1d8baf..bd3ce34fb6a6c 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -3944,6 +3944,9 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *connector drm_dp_is_branch(intel_dp->dpcd)); intel_init_dpcd_quirks(intel_dp, &intel_dp->desc.ident);

+ intel_dp->colorimetry_support = + intel_dp_get_colorimetry_status(intel_dp); + /* * Read the eDP display control registers. * @@ -4057,6 +4060,9 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)

intel_init_dpcd_quirks(intel_dp, &intel_dp->desc.ident);

+ intel_dp->colorimetry_support = + intel_dp_get_colorimetry_status(intel_dp); + intel_dp_update_sink_caps(intel_dp); }

@@ -6774,9 +6780,6 @@ intel_dp_init_connector(struct intel_digital_port *dig_port, "HDCP init failed, skipping.\n"); }

- intel_dp->colorimetry_support = - intel_dp_get_colorimetry_status(intel_dp); - intel_dp->frl.is_trained = false; intel_dp->frl.trained_rate_gbps = 0;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Aakash Menon aakash.r.menon@gmail.com

[ Upstream commit 151ac45348afc5b56baa584c7cd4876addf461ff ]

Bit 270-271 are occasionally unexpectedly set by the hardware. This issue was observed with 10G SFPs causing huge time errors (> 30ms) in PTP. Only 30 bits are needed for the nanosecond part of the timestamp, clear 2 most significant bits before extracting timestamp from the internal frame header.

Fixes: 70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping") Signed-off-by: Aakash Menon aakash.menon@protempis.com Reviewed-by: Horatiu Vultur horatiu.vultur@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/microchip/sparx5/sparx5_packet.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c index f3f5fb4204689..70427643f777c 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c @@ -45,8 +45,12 @@ void sparx5_ifh_parse(u32 *ifh, struct frame_info *info) fwd = (fwd >> 5); info->src_port = FIELD_GET(GENMASK(7, 1), fwd);

+ /* + * Bit 270-271 are occasionally unexpectedly set by the hardware, + * clear bits before extracting timestamp + */ info->timestamp = - ((u64)xtr_hdr[2] << 24) | + ((u64)(xtr_hdr[2] & GENMASK(5, 0)) << 24) | ((u64)xtr_hdr[3] << 16) | ((u64)xtr_hdr[4] << 8) | ((u64)xtr_hdr[5] << 0);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mohamed Khalfella mkhalfella@purestorage.com

[ Upstream commit ec793155894140df7421d25903de2e6bc12c695b ]

Collecting crdump involves reading vsc registers from pci config space of mlx device, which can take long time to complete. This might result in starving other threads waiting to run on the cpu.

Numbers I got from testing ConnectX-5 Ex MCX516A-CDAT in the lab:

- mlx5_vsc_gw_read_block_fast() was called with length = 1310716. - mlx5_vsc_gw_read_fast() reads 4 bytes at a time. It was not used to read the entire 1310716 bytes. It was called 53813 times because there are jumps in read_addr. - On average mlx5_vsc_gw_read_fast() took 35284.4ns. - In total mlx5_vsc_wait_on_flag() called vsc_read() 54707 times. The average time for each call was 17548.3ns. In some instances vsc_read() was called more than one time when the flag was not set. As expected the thread released the cpu after 16 iterations in mlx5_vsc_wait_on_flag(). - Total time to read crdump was 35284.4ns * 53813 ~= 1.898s.

It was seen in the field that crdump can take more than 5 seconds to complete. During that time mlx5_vsc_wait_on_flag() did not release the cpu because it did not complete 16 iterations. It is believed that pci config reads were slow. Adding cond_resched() every 128 register read improves the situation. In the common case the, crdump takes ~1.8989s, the thread yields the cpu every ~4.51ms. If crdump takes ~5s, the thread yields the cpu every ~18.0ms.

Fixes: 8b9d8baae1de ("net/mlx5: Add Crdump support") Reviewed-by: Yuanyuan Zhong yzhong@purestorage.com Signed-off-by: Mohamed Khalfella mkhalfella@purestorage.com Reviewed-by: Moshe Shemesh moshe@nvidia.com Signed-off-by: Saeed Mahameed saeedm@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c index d0b595ba61101..432c98f2626db 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/pci_vsc.c @@ -24,6 +24,11 @@ pci_write_config_dword((dev)->pdev, (dev)->vsc_addr + (offset), (val)) #define VSC_MAX_RETRIES 2048

+/* Reading VSC registers can take relatively long time. + * Yield the cpu every 128 registers read. + */ +#define VSC_GW_READ_BLOCK_COUNT 128 + enum { VSC_CTRL_OFFSET = 0x4, VSC_COUNTER_OFFSET = 0x8, @@ -273,6 +278,7 @@ int mlx5_vsc_gw_read_block_fast(struct mlx5_core_dev *dev, u32 *data, { unsigned int next_read_addr = 0; unsigned int read_addr = 0; + unsigned int count = 0;

while (read_addr < length) { if (mlx5_vsc_gw_read_fast(dev, read_addr, &next_read_addr, @@ -280,6 +286,10 @@ int mlx5_vsc_gw_read_block_fast(struct mlx5_core_dev *dev, u32 *data, return read_addr;

read_addr = next_read_addr; + if (++count == VSC_GW_READ_BLOCK_COUNT) { + cond_resched(); + count = 0; + } } return length; }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jianbo Liu jianbol@nvidia.com

[ Upstream commit 7b124695db40d5c9c5295a94ae928a8d67a01c3d ]

The km.state is not checked in driver's delayed work. When xfrm_state_check_expire() is called, the state can be reset to XFRM_STATE_EXPIRED, even if it is XFRM_STATE_DEAD already. This happens when xfrm state is deleted, but not freed yet. As __xfrm_state_delete() is called again in xfrm timer, the following crash occurs.

To fix this issue, skip xfrm_state_check_expire() if km.state is not XFRM_STATE_VALID.

Oops: general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP CPU: 5 UID: 0 PID: 7448 Comm: kworker/u102:2 Not tainted 6.11.0-rc2+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_sw_limits [mlx5_core] RIP: 0010:__xfrm_state_delete+0x3d/0x1b0 Code: 0f 84 8b 01 00 00 48 89 fd c6 87 c8 00 00 00 05 48 8d bb 40 10 00 00 e8 11 04 1a 00 48 8b 95 b8 00 00 00 48 8b 85 c0 00 00 00 <48> 89 42 08 48 89 10 48 8b 55 10 48 b8 00 01 00 00 00 00 ad de 48 RSP: 0018:ffff88885f945ec8 EFLAGS: 00010246 RAX: dead000000000122 RBX: ffffffff82afa940 RCX: 0000000000000036 RDX: dead000000000100 RSI: 0000000000000000 RDI: ffffffff82afb980 RBP: ffff888109a20340 R08: ffff88885f945ea0 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88885f945ff8 R12: 0000000000000246 R13: ffff888109a20340 R14: ffff88885f95f420 R15: ffff88885f95f400 FS: 0000000000000000(0000) GS:ffff88885f940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2163102430 CR3: 00000001128d6001 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x1a2/0x390 ? asm_exc_general_protection+0x22/0x30 ? __xfrm_state_delete+0x3d/0x1b0 ? __xfrm_state_delete+0x2f/0x1b0 xfrm_timer_handler+0x174/0x350 ? __xfrm_state_delete+0x1b0/0x1b0 __hrtimer_run_queues+0x121/0x270 hrtimer_run_softirq+0x88/0xd0 handle_softirqs+0xcc/0x270 do_softirq+0x3c/0x50 </IRQ> <TASK> __local_bh_enable_ip+0x47/0x50 mlx5e_ipsec_handle_sw_limits+0x7d/0x90 [mlx5_core] process_one_work+0x137/0x2d0 worker_thread+0x28d/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 </TASK>

Fixes: b2f7b01d36a9 ("net/mlx5e: Simulate missing IPsec TX limits hardware functionality") Signed-off-by: Jianbo Liu jianbol@nvidia.com Reviewed-by: Leon Romanovsky leonro@nvidia.com Signed-off-by: Saeed Mahameed saeedm@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c index 3d274599015be..ca92e518be766 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c @@ -67,7 +67,6 @@ static void mlx5e_ipsec_handle_sw_limits(struct work_struct *_work) return;

spin_lock_bh(&x->lock); - xfrm_state_check_expire(x); if (x->km.state == XFRM_STATE_EXPIRED) { sa_entry->attrs.drop = true; spin_unlock_bh(&x->lock); @@ -75,6 +74,13 @@ static void mlx5e_ipsec_handle_sw_limits(struct work_struct *_work) mlx5e_accel_ipsec_fs_modify(sa_entry); return; } + + if (x->km.state != XFRM_STATE_VALID) { + spin_unlock_bh(&x->lock); + return; + } + + xfrm_state_check_expire(x); spin_unlock_bh(&x->lock);

queue_delayed_work(sa_entry->ipsec->wq, &dwork->dwork,

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan ruanjinjie@huawei.com

[ Upstream commit 09573b1cc76e7ff8f056ab29ea1cdc152ec8c653 ]

disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ.

Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Reviewed-by: Miquel Raynal miquel.raynal@bootlin.com Signed-off-by: Jinjie Ruan ruanjinjie@huawei.com Link: https://lore.kernel.org/20240911094234.1922418-1-ruanjinjie@huawei.com Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ieee802154/mcr20a.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c index 433fb58392031..020d392a98b69 100644 --- a/drivers/net/ieee802154/mcr20a.c +++ b/drivers/net/ieee802154/mcr20a.c @@ -1302,16 +1302,13 @@ mcr20a_probe(struct spi_device *spi) irq_type = IRQF_TRIGGER_FALLING;

ret = devm_request_irq(&spi->dev, spi->irq, mcr20a_irq_isr, - irq_type, dev_name(&spi->dev), lp); + irq_type | IRQF_NO_AUTOEN, dev_name(&spi->dev), lp); if (ret) { dev_err(&spi->dev, "could not request_irq for mcr20a\n"); ret = -ENODEV; goto free_dev; }

- /* disable_irq by default and wait for starting hardware */ - disable_irq(spi->irq); - ret = ieee802154_register_hw(hw); if (ret) { dev_crit(&spi->dev, "ieee802154_register_hw failed\n");

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Phil Sutter phil@nwl.cc

[ Upstream commit 8a89015644513ef69193a037eb966f2d55fe385a ]

As a side-effect of nftables' commit dbff26bfba833 ("cache: consolidate reset command"), audit logs changed when more objects were reset than fit into a single netlink message.

Since the objects' distribution in netlink messages is not relevant, implement a summarizing function which combines repeated audit logs into a single one with summed up 'entries=' value.

Fixes: 203bb9d39866 ("selftests: netfilter: Extend nft_audit.sh") Signed-off-by: Phil Sutter phil@nwl.cc Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/net/netfilter/nft_audit.sh | 57 ++++++++++--------- 1 file changed, 29 insertions(+), 28 deletions(-)

diff --git a/tools/testing/selftests/net/netfilter/nft_audit.sh b/tools/testing/selftests/net/netfilter/nft_audit.sh index 902f8114bc80f..87f2b4c725aa0 100755 --- a/tools/testing/selftests/net/netfilter/nft_audit.sh +++ b/tools/testing/selftests/net/netfilter/nft_audit.sh @@ -48,12 +48,31 @@ logread_pid=$! trap 'kill $logread_pid; rm -f $logfile $rulefile' EXIT exec 3<"$logfile"

+lsplit='s/^(.*) entries=([^ ]*) (.*)$/pfx="\1"\nval="\2"\nsfx="\3"/' +summarize_logs() { + sum=0 + while read line; do + eval $(sed "$lsplit" <<< "$line") + [[ $sum -gt 0 ]] && { + [[ "$pfx $sfx" == "$tpfx $tsfx" ]] && { + let "sum += val" + continue + } + echo "$tpfx entries=$sum $tsfx" + } + tpfx="$pfx" + tsfx="$sfx" + sum=$val + done + echo "$tpfx entries=$sum $tsfx" +} + do_test() { # (cmd, log) echo -n "testing for cmd: $1 ... " cat <&3 >/dev/null $1 >/dev/null || exit 1 sleep 0.1 - res=$(diff -a -u <(echo "$2") - <&3) + res=$(diff -a -u <(echo "$2") <(summarize_logs <&3)) [ $? -eq 0 ] && { echo "OK"; return; } echo "FAIL" grep -v '^(---|+++|@@)' <<< "$res" @@ -152,31 +171,17 @@ do_test 'nft reset rules t1 c2' \ 'table=t1 family=2 entries=3 op=nft_reset_rule'

do_test 'nft reset rules table t1' \ -'table=t1 family=2 entries=3 op=nft_reset_rule -table=t1 family=2 entries=3 op=nft_reset_rule -table=t1 family=2 entries=3 op=nft_reset_rule' +'table=t1 family=2 entries=9 op=nft_reset_rule'

do_test 'nft reset rules t2 c3' \ -'table=t2 family=2 entries=189 op=nft_reset_rule -table=t2 family=2 entries=188 op=nft_reset_rule -table=t2 family=2 entries=126 op=nft_reset_rule' +'table=t2 family=2 entries=503 op=nft_reset_rule'

do_test 'nft reset rules t2' \ -'table=t2 family=2 entries=3 op=nft_reset_rule -table=t2 family=2 entries=3 op=nft_reset_rule -table=t2 family=2 entries=186 op=nft_reset_rule -table=t2 family=2 entries=188 op=nft_reset_rule -table=t2 family=2 entries=129 op=nft_reset_rule' +'table=t2 family=2 entries=509 op=nft_reset_rule'

do_test 'nft reset rules' \ -'table=t1 family=2 entries=3 op=nft_reset_rule -table=t1 family=2 entries=3 op=nft_reset_rule -table=t1 family=2 entries=3 op=nft_reset_rule -table=t2 family=2 entries=3 op=nft_reset_rule -table=t2 family=2 entries=3 op=nft_reset_rule -table=t2 family=2 entries=180 op=nft_reset_rule -table=t2 family=2 entries=188 op=nft_reset_rule -table=t2 family=2 entries=135 op=nft_reset_rule' +'table=t1 family=2 entries=9 op=nft_reset_rule +table=t2 family=2 entries=509 op=nft_reset_rule'

# resetting sets and elements

@@ -200,13 +205,11 @@ do_test 'nft reset counters t1' \ 'table=t1 family=2 entries=1 op=nft_reset_obj'

do_test 'nft reset counters t2' \ -'table=t2 family=2 entries=342 op=nft_reset_obj -table=t2 family=2 entries=158 op=nft_reset_obj' +'table=t2 family=2 entries=500 op=nft_reset_obj'

do_test 'nft reset counters' \ 'table=t1 family=2 entries=1 op=nft_reset_obj -table=t2 family=2 entries=341 op=nft_reset_obj -table=t2 family=2 entries=159 op=nft_reset_obj' +table=t2 family=2 entries=500 op=nft_reset_obj'

# resetting quotas

@@ -217,13 +220,11 @@ do_test 'nft reset quotas t1' \ 'table=t1 family=2 entries=1 op=nft_reset_obj'

do_test 'nft reset quotas t2' \ -'table=t2 family=2 entries=315 op=nft_reset_obj -table=t2 family=2 entries=185 op=nft_reset_obj' +'table=t2 family=2 entries=500 op=nft_reset_obj'

do_test 'nft reset quotas' \ 'table=t1 family=2 entries=1 op=nft_reset_obj -table=t2 family=2 entries=314 op=nft_reset_obj -table=t2 family=2 entries=186 op=nft_reset_obj' +table=t2 family=2 entries=500 op=nft_reset_obj'

# deleting rules

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: zhang jiao zhangjiao2@cmss.chinamobile.com

[ Upstream commit 10dbd23633f0433f8d13c2803d687b36a675ef60 ]

There is no return value in count_entries, just add it.

Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone") Signed-off-by: zhang jiao zhangjiao2@cmss.chinamobile.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/netfilter/conntrack_dump_flush.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c b/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c index bd9317bf5adaf..dc056fec993bd 100644 --- a/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c +++ b/tools/testing/selftests/net/netfilter/conntrack_dump_flush.c @@ -207,6 +207,7 @@ static int conntrack_data_generate_v6(struct mnl_socket *sock, static int count_entries(const struct nlmsghdr *nlh, void *data) { reply_counter++; + return MNL_CB_OK; }

static int conntracK_count_zone(struct mnl_socket *sock, uint16_t zone)

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz luiz.von.dentz@intel.com

[ Upstream commit 333b4fd11e89b29c84c269123f871883a30be586 ]

[Syzbot reported] BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54

CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci2 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline] l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825 l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514 hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline] hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 ...

Freed by task 5245: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object+0xf7/0x160 mm/kasan/common.c:240 __kasan_slab_free+0x32/0x50 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x12a/0x3b0 mm/slub.c:4598 l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline] l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802 l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241 hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline] hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265 hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583 abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917 hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Reported-by: syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com Tested-by: syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c12e2f941af1feb5632c Fixes: 7b064edae38d ("Bluetooth: Fix authentication if acl data comes before remote feature evt") Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_core.c | 2 ++ net/bluetooth/hci_event.c | 2 +- net/bluetooth/l2cap_core.c | 8 -------- 3 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 9493966cf389f..a9feb323c7d29 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -3792,6 +3792,8 @@ static void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb)

hci_dev_lock(hdev); conn = hci_conn_hash_lookup_handle(hdev, handle); + if (conn && hci_dev_test_flag(hdev, HCI_MGMT)) + mgmt_device_connected(hdev, conn, NULL, 0); hci_dev_unlock(hdev);

if (conn) { diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 59d9086db75fe..b2053bbe226c8 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -3707,7 +3707,7 @@ static void hci_remote_features_evt(struct hci_dev *hdev, void *data, goto unlock; }

- if (!ev->status && !test_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) { + if (!ev->status) { struct hci_cp_remote_name_req cp; memset(&cp, 0, sizeof(cp)); bacpy(&cp.bdaddr, &conn->dst); diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 9988ba382b686..6544c1ed71434 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4066,17 +4066,9 @@ static void l2cap_connect(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, static int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data) { - struct hci_dev *hdev = conn->hcon->hdev; - struct hci_conn *hcon = conn->hcon; - if (cmd_len < sizeof(struct l2cap_conn_req)) return -EPROTO;

- hci_dev_lock(hdev); - if (hci_dev_test_flag(hdev, HCI_MGMT)) - mgmt_device_connected(hdev, hcon, NULL, 0); - hci_dev_unlock(hdev); - l2cap_connect(conn, cmd, data, L2CAP_CONN_RSP); return 0; }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Howells dhowells@redhat.com

[ Upstream commit 2cf36327ee1e47733aba96092d7bd082a4056ff5 ]

afs_retry_request() is supposed to be pointed to by the afs_req_ops netfs operations table, but the pointer got lost somewhere. The function is used during writeback to rotate through the authentication keys that were in force when the file was modified locally.

Fix this by adding the pointer to the function.

Fixes: 1ecb146f7cd8 ("netfs, afs: Use writeback retry to deal with alternate keys") Reported-by: Dr. David Alan Gilbert linux@treblig.org Signed-off-by: David Howells dhowells@redhat.com Link: https://lore.kernel.org/r/1690847.1726346402@warthog.procyon.org.uk cc: Marc Dionne marc.dionne@auristor.com cc: Jeff Layton jlayton@kernel.org cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/file.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/fs/afs/file.c b/fs/afs/file.c index c3f0c45ae9a9b..e0885cfeb72a7 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -403,6 +403,7 @@ const struct netfs_request_ops afs_req_ops = { .begin_writeback = afs_begin_writeback, .prepare_write = afs_prepare_write, .issue_write = afs_issue_write, + .retry_request = afs_retry_request, };

static void afs_add_open_mmap(struct afs_vnode *vnode)

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vladimir Oltean vladimir.oltean@nxp.com

[ Upstream commit 6c24a03a61a245fe34d47582898331fa034b6ccd ]

Alexander Sverdlin presents 2 problems during shutdown with the lan9303 driver. One is specific to lan9303 and the other just happens to reproduce there.

The first problem is that lan9303 is unique among DSA drivers in that it calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown, not remove):

phy_state_machine() -> ... -> dsa_user_phy_read() -> ds->ops->phy_read() -> lan9303_phy_read() -> chip->ops->phy_read() -> lan9303_mdio_phy_read() -> dev_get_drvdata()

But we never stop the phy_state_machine(), so it may continue to run after dsa_switch_shutdown(). Our common pattern in all DSA drivers is to set drvdata to NULL to suppress the remove() method that may come afterwards. But in this case it will result in an NPD.

The second problem is that the way in which we set dp->conduit->dsa_ptr = NULL; is concurrent with receive packet processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL, but afterwards, rather than continuing to use that non-NULL value, dev->dsa_ptr is dereferenced again and again without NULL checks: dsa_conduit_find_user() and many other places. In between dereferences, there is no locking to ensure that what was valid once continues to be valid.

Both problems have the common aspect that closing the conduit interface solves them.

In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN event in dsa_user_netdevice_event() which closes user ports as well. dsa_port_disable_rt() calls phylink_stop(), which synchronously stops the phylink state machine, and ds->ops->phy_read() will thus no longer call into the driver after this point.

In the second case, dev_close(conduit) should do this, as per Documentation/networking/driver.rst:

| Quiescence | ---------- | | After the ndo_stop routine has been called, the hardware must | not receive or transmit any data. All in flight packets must | be aborted. If necessary, poll or wait for completion of | any reset commands.

So it should be sufficient to ensure that later, when we zeroize conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call on this conduit.

The addition of the netif_device_detach() function is to ensure that ioctls, rtnetlinks and ethtool requests on the user ports no longer propagate down to the driver - we're no longer prepared to handle them.

The race condition actually did not exist when commit 0650bf52b31f ("net: dsa: be compatible with masters which unregister on shutdown") first introduced dsa_switch_shutdown(). It was created later, when we stopped unregistering the user interfaces from a bad spot, and we just replaced that sequence with a racy zeroization of conduit->dsa_ptr (one which doesn't ensure that the interfaces aren't up).

Reported-by: Alexander Sverdlin alexander.sverdlin@siemens.com Closes: https://lore.kernel.org/netdev/2d2e3bba17203c14a5ffdabc174e3b6bbb9ad438.came... Closes: https://lore.kernel.org/netdev/c1bf4de54e829111e0e4a70e7bd1cf523c9550ff.came... Fixes: ee534378f005 ("net: dsa: fix panic when DSA master device unbinds on shutdown") Reviewed-by: Alexander Sverdlin alexander.sverdlin@siemens.com Tested-by: Alexander Sverdlin alexander.sverdlin@siemens.com Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Link: https://patch.msgid.link/20240913203549.3081071-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/dsa/dsa.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c index 12521a7d40481..03ef2a2af4309 100644 --- a/net/dsa/dsa.c +++ b/net/dsa/dsa.c @@ -1579,6 +1579,7 @@ EXPORT_SYMBOL_GPL(dsa_unregister_switch); void dsa_switch_shutdown(struct dsa_switch *ds) { struct net_device *conduit, *user_dev; + LIST_HEAD(close_list); struct dsa_port *dp;

mutex_lock(&dsa2_mutex); @@ -1588,10 +1589,16 @@ void dsa_switch_shutdown(struct dsa_switch *ds)

rtnl_lock();

+ dsa_switch_for_each_cpu_port(dp, ds) + list_add(&dp->conduit->close_list, &close_list); + + dev_close_many(&close_list, true); + dsa_switch_for_each_user_port(dp, ds) { conduit = dsa_port_to_conduit(dp); user_dev = dp->user;

+ netif_device_detach(user_dev); netdev_upper_dev_unlink(conduit, user_dev); }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann daniel@iogearbox.net

[ Upstream commit e609c959a939660c7519895f853dfa5624c6827a ]

Commit 24ab059d2ebd ("net: check dev->gso_max_size in gso_features_check()") added a dev->gso_max_size test to gso_features_check() in order to fall back to GSO when needed.

This was added as it was noticed that some drivers could misbehave if TSO packets get too big. However, the check doesn't respect dev->gso_ipv4_max_size limit. For instance, a device could be configured with BIG TCP for IPv4, but not IPv6.

Therefore, add a netif_get_gso_max_size() equivalent to netif_get_gro_max_size() and use the helper to respect both limits before falling back to GSO engine.

Fixes: 24ab059d2ebd ("net: check dev->gso_max_size in gso_features_check()") Signed-off-by: Daniel Borkmann daniel@iogearbox.net Cc: Eric Dumazet edumazet@google.com Cc: Paolo Abeni pabeni@redhat.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://patch.msgid.link/20240923212242.15669-2-daniel@iogearbox.net Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/netdevice.h | 9 +++++++++ net/core/dev.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 84a445ca4749a..238aaed5d7236 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -5009,6 +5009,15 @@ netif_get_gro_max_size(const struct net_device *dev, const struct sk_buff *skb) READ_ONCE(dev->gro_ipv4_max_size); }

+static inline unsigned int +netif_get_gso_max_size(const struct net_device *dev, const struct sk_buff *skb) +{ + /* pairs with WRITE_ONCE() in netif_set_gso(_ipv4)_max_size() */ + return skb->protocol == htons(ETH_P_IPV6) ? + READ_ONCE(dev->gso_max_size) : + READ_ONCE(dev->gso_ipv4_max_size); +} + static inline bool netif_is_macsec(const struct net_device *dev) { return dev->priv_flags & IFF_MACSEC; diff --git a/net/core/dev.c b/net/core/dev.c index 2b4819b610b8a..d7380a6ecfabb 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3502,7 +3502,7 @@ static netdev_features_t gso_features_check(const struct sk_buff *skb, if (gso_segs > READ_ONCE(dev->gso_max_segs)) return features & ~NETIF_F_GSO_MASK;

- if (unlikely(skb->len >= READ_ONCE(dev->gso_max_size))) + if (unlikely(skb->len >= netif_get_gso_max_size(dev, skb))) return features & ~NETIF_F_GSO_MASK;

if (!skb_shinfo(skb)->gso_type) {

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Csókás, Bence csokas.bence@prolan.hu

[ Upstream commit a1477dc87dc4996dcf65a4893d4e2c3a6b593002 ]

On link state change, the controller gets reset, causing PPS to drop out. Re-enable PPS if it was enabled before the controller reset.

Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock") Signed-off-by: Csókás, Bence csokas.bence@prolan.hu Link: https://patch.msgid.link/20240924093705.2897329-1-csokas.bence@prolan.hu Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fec.h | 6 +++++ drivers/net/ethernet/freescale/fec_main.c | 11 ++++++++- drivers/net/ethernet/freescale/fec_ptp.c | 30 +++++++++++++++++++++++ 3 files changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index a19cb2a786fd2..0552317a2554b 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -691,10 +691,16 @@ struct fec_enet_private { /* XDP BPF Program */ struct bpf_prog *xdp_prog;

+ struct { + int pps_enable; + } ptp_saved_state; + u64 ethtool_stats[]; };

void fec_ptp_init(struct platform_device *pdev, int irq_idx); +void fec_ptp_restore_state(struct fec_enet_private *fep); +void fec_ptp_save_state(struct fec_enet_private *fep); void fec_ptp_stop(struct platform_device *pdev); void fec_ptp_start_cyclecounter(struct net_device *ndev); int fec_ptp_set(struct net_device *ndev, struct kernel_hwtstamp_config *config, diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index fb19295529a21..8004f12352b6b 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1077,6 +1077,8 @@ fec_restart(struct net_device *ndev) u32 rcntl = OPT_FRAME_SIZE | 0x04; u32 ecntl = FEC_ECR_ETHEREN;

+ fec_ptp_save_state(fep); + /* Whack a reset. We should wait for this. * For i.MX6SX SOC, enet use AXI bus, we use disable MAC * instead of reset MAC itself. @@ -1244,8 +1246,10 @@ fec_restart(struct net_device *ndev) writel(ecntl, fep->hwp + FEC_ECNTRL); fec_enet_active_rxring(ndev);

- if (fep->bufdesc_ex) + if (fep->bufdesc_ex) { fec_ptp_start_cyclecounter(ndev); + fec_ptp_restore_state(fep); + }

/* Enable interrupts we wish to service */ if (fep->link) @@ -1336,6 +1340,8 @@ fec_stop(struct net_device *ndev) netdev_err(ndev, "Graceful transmit stop did not complete!\n"); }

+ fec_ptp_save_state(fep); + /* Whack a reset. We should wait for this. * For i.MX6SX SOC, enet use AXI bus, we use disable MAC * instead of reset MAC itself. @@ -1366,6 +1372,9 @@ fec_stop(struct net_device *ndev) val = readl(fep->hwp + FEC_ECNTRL); val |= FEC_ECR_EN1588; writel(val, fep->hwp + FEC_ECNTRL); + + fec_ptp_start_cyclecounter(ndev); + fec_ptp_restore_state(fep); } }

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 2e4f3e1782a25..8027b532de078 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -770,6 +770,36 @@ void fec_ptp_init(struct platform_device *pdev, int irq_idx) schedule_delayed_work(&fep->time_keep, HZ); }

+void fec_ptp_save_state(struct fec_enet_private *fep) +{ + unsigned long flags; + + spin_lock_irqsave(&fep->tmreg_lock, flags); + + fep->ptp_saved_state.pps_enable = fep->pps_enable; + + spin_unlock_irqrestore(&fep->tmreg_lock, flags); +} + +/* Restore PTP functionality after a reset */ +void fec_ptp_restore_state(struct fec_enet_private *fep) +{ + unsigned long flags; + + spin_lock_irqsave(&fep->tmreg_lock, flags); + + /* Reset turned it off, so adjust our status flag */ + fep->pps_enable = 0; + + spin_unlock_irqrestore(&fep->tmreg_lock, flags); + + /* Restart PPS if needed */ + if (fep->ptp_saved_state.pps_enable) { + /* Re-enable PPS */ + fec_ptp_enable_pps(fep, 1); + } +} + void fec_ptp_stop(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet edumazet@google.com

[ Upstream commit c20029db28399ecc50e556964eaba75c43b1e2f1 ]

After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet.

Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic :

IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28.

When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len

Then the following sets gso_segs to 0 :

gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size);

Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/

qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len;

This leads to the following crash in fq_codel [1]

qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel.

This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug.

[1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB

Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.724561] CR2: 0000000000000000 CR3: 000000010c568000 CR4: 00000000000006f0 [ 70.724561] Call Trace: [ 70.724561] <TASK> [ 70.724561] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 70.724561] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 70.724561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 70.724561] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 70.724561] ? fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] dev_qdisc_enqueue (net/core/dev.c:3784) [ 70.724561] __dev_queue_xmit (net/core/dev.c:3880 (discriminator 2) net/core/dev.c:4390 (discriminator 2)) [ 70.724561] ? irqentry_enter (kernel/entry/common.c:237) [ 70.724561] ? sysvec_apic_timer_interrupt (./arch/x86/include/asm/hardirq.h:74 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2)) [ 70.724561] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 70.724561] ? asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702) [ 70.724561] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/virtio_net.h:129 (discriminator 1)) [ 70.724561] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1)) [ 70.724561] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4)) [ 70.724561] ? netdev_name_node_lookup_rcu (net/core/dev.c:325 (discriminator 1)) [ 70.724561] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1)) [ 70.724561] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355) [ 70.724561] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1)) [ 70.724561] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 70.724561] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 70.724561] RIP: 0033:0x41ae09

Fixes: cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Eric Dumazet edumazet@google.com Cc: Jonathan Davies jonathan.davies@nutanix.com Reviewed-by: Willem de Bruijn willemb@google.com Reviewed-by: Jonathan Davies jonathan.davies@nutanix.com Reviewed-by: David Ahern dsahern@kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c index d7380a6ecfabb..62ec4bf8bcd88 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3748,7 +3748,7 @@ static void qdisc_pkt_len_init(struct sk_buff *skb) sizeof(_tcphdr), &_tcphdr); if (likely(th)) hdr_len += __tcp_hdrlen(th); - } else { + } else if (shinfo->gso_type & SKB_GSO_UDP_L4) { struct udphdr _udphdr;

if (skb_header_pointer(skb, hdr_len,

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shenwei Wang shenwei.wang@nxp.com

[ Upstream commit 4c1b56671b68ffcbe6b78308bfdda6bcce6491ae ]

Increase the timeout for checking the busy bit of the VLAN Tag register from 10µs to 500ms. This change is necessary to accommodate scenarios where Energy Efficient Ethernet (EEE) is enabled.

Overnight testing revealed that when EEE is active, the busy bit can remain set for up to approximately 300ms. The new 500ms timeout provides a safety margin.

Fixes: ed64639bc1e0 ("net: stmmac: Add support for VLAN Rx filtering") Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: Shenwei Wang shenwei.wang@nxp.com Link: https://patch.msgid.link/20240924205424.573913-1-shenwei.wang@nxp.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/dwmac4_core.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 8e2049ed60159..c79d70899493b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/ethtool.h> #include <linux/io.h> +#include <linux/iopoll.h> #include "stmmac.h" #include "stmmac_pcs.h" #include "dwmac4.h" @@ -475,7 +476,7 @@ static int dwmac4_write_vlan_filter(struct net_device *dev, u8 index, u32 data) { void __iomem *ioaddr = (void __iomem *)dev->base_addr; - int i, timeout = 10; + int ret; u32 val;

if (index >= hw->num_vlan) @@ -491,16 +492,15 @@ static int dwmac4_write_vlan_filter(struct net_device *dev,

writel(val, ioaddr + GMAC_VLAN_TAG);

- for (i = 0; i < timeout; i++) { - val = readl(ioaddr + GMAC_VLAN_TAG); - if (!(val & GMAC_VLAN_TAG_CTRL_OB)) - return 0; - udelay(1); + ret = readl_poll_timeout(ioaddr + GMAC_VLAN_TAG, val, + !(val & GMAC_VLAN_TAG_CTRL_OB), + 1000, 500000); + if (ret) { + netdev_err(dev, "Timeout accessing MAC_VLAN_Tag_Filter\n"); + return -EBUSY; }

- netdev_err(dev, "Timeout accessing MAC_VLAN_Tag_Filter\n"); - - return -EBUSY; + return 0; }

static int dwmac4_add_hw_vlan_rx_fltr(struct net_device *dev,

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet edumazet@google.com

[ Upstream commit 49d14b54a527289d09a9480f214b8c586322310a ]

syzbot was able to trigger this warning [1], after injecting a malicious packet through af_packet, setting skb->csum_start and thus the transport header to an incorrect value.

We can at least make sure the transport header is after the end of the network header (with a estimated minimal size).

[1] [ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0 mac=(-1,-1) mac_len=0 net=(16,-6) trans=10 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0 priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9 [ 67.877764] sk family=17 type=3 proto=0 [ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00 [ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02 [ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00 [ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e [ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00 [ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887384] skb frag: 00000100: 00 00 [ 67.887878] ------------[ cut here ]------------ [ 67.887908] offset (-6) >= skb_headlen() (14) [ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs [ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011 [ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891043] Call Trace: [ 67.891173] <TASK> [ 67.891274] ? __warn (kernel/panic.c:741) [ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239) [ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) [ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1)) [ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 net/ipv4/ip_output.c:113) [ 67.891459] ? __pfx_ip_finish_output2 (net/ipv4/ip_output.c:200) [ 67.891470] ? ip_route_output_flow (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:96 (discriminator 13) ./include/linux/rcupdate.h:871 (discriminator 13) net/ipv4/route.c:2625 (discriminator 13) ./include/net/route.h:141 (discriminator 13) net/ipv4/route.c:2852 (discriminator 13)) [ 67.891484] ipvlan_process_v4_outbound (drivers/net/ipvlan/ipvlan_core.c:445 (discriminator 1)) [ 67.891581] ipvlan_queue_xmit (drivers/net/ipvlan/ipvlan_core.c:542 drivers/net/ipvlan/ipvlan_core.c:604 drivers/net/ipvlan/ipvlan_core.c:670) [ 67.891596] ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:227) [ 67.891607] dev_hard_start_xmit (./include/linux/netdevice.h:4916 ./include/linux/netdevice.h:4925 net/core/dev.c:3588 net/core/dev.c:3604) [ 67.891620] __dev_queue_xmit (net/core/dev.h:168 (discriminator 25) net/core/dev.c:4425 (discriminator 25)) [ 67.891630] ? skb_copy_bits (./include/linux/uaccess.h:233 (discriminator 1) ./include/linux/uaccess.h:260 (discriminator 1) ./include/linux/highmem-internal.h:230 (discriminator 1) net/core/skbuff.c:3018 (discriminator 1)) [ 67.891645] ? __pskb_pull_tail (net/core/skbuff.c:2848 (discriminator 4)) [ 67.891655] ? skb_partial_csum_set (net/core/skbuff.c:5657) [ 67.891666] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/skbuff.h:2791 (discriminator 3) ./include/linux/skbuff.h:2799 (discriminator 3) ./include/linux/virtio_net.h:109 (discriminator 3)) [ 67.891684] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1)) [ 67.891700] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4)) [ 67.891716] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1)) [ 67.891734] ? do_sock_setsockopt (net/socket.c:2335) [ 67.891747] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355) [ 67.891761] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1)) [ 67.891772] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 67.891785] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

Fixes: 9181d6f8a2bb ("net: add more sanity check in virtio_net_hdr_to_skb()") Signed-off-by: Eric Dumazet edumazet@google.com Reviewed-by: Willem de Bruijn willemb@google.com Link: https://patch.msgid.link/20240926165836.3797406-1-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/virtio_net.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 276ca543ef44d..02a9f4dc594d0 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -103,8 +103,10 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb,

if (!skb_partial_csum_set(skb, start, off)) return -EINVAL; + if (skb_transport_offset(skb) < nh_min_len) + return -EINVAL;

- nh_min_len = max_t(u32, nh_min_len, skb_transport_offset(skb)); + nh_min_len = skb_transport_offset(skb); p_off = nh_min_len + thlen; if (!pskb_may_pull(skb, p_off)) return -EINVAL;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Schimmel idosch@nvidia.com

[ Upstream commit 555f45d24ba7cd5527716553031641cdebbe76c7 ]

When user space deletes a port from an MDB entry, the port is removed synchronously. If this was the last port in the entry and the entry is not joined by the host itself, then the entry is scheduled for deletion via a timer.

The above means that it is possible for the MDB get netlink request to retrieve an empty entry which is scheduled for deletion. This is problematic as after deleting the last port in an entry, user space cannot rely on a non-zero return code from the MDB get request as an indication that the port was successfully removed.

Fix by returning an error when the entry's port list is empty and the entry is not joined by the host.

Fixes: 68b380a395a7 ("bridge: mcast: Add MDB get support") Reported-by: Jamie Bainbridge jamie.bainbridge@gmail.com Closes: https://lore.kernel.org/netdev/c92569919307749f879b9482b0f3e125b7d9d2e3.1726... Tested-by: Jamie Bainbridge jamie.bainbridge@gmail.com Signed-off-by: Ido Schimmel idosch@nvidia.com Acked-by: Nikolay Aleksandrov razor@blackwall.org Link: https://patch.msgid.link/20240929123640.558525-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bridge/br_mdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c index bc37e47ad8299..1a52a0bca086d 100644 --- a/net/bridge/br_mdb.c +++ b/net/bridge/br_mdb.c @@ -1674,7 +1674,7 @@ int br_mdb_get(struct net_device *dev, struct nlattr *tb[], u32 portid, u32 seq, spin_lock_bh(&br->multicast_lock);

mp = br_mdb_ip_get(br, &group); - if (!mp) { + if (!mp || (!mp->ports && !mp->host_joined)) { NL_SET_ERR_MSG_MOD(extack, "MDB entry not found"); err = -ENOENT; goto unlock;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong djwong@kernel.org

[ Upstream commit a311a08a4237241fb5b9d219d3e33346de6e83e0 ]

File contents can only be shared (i.e. reflinked) below EOF, so it makes no sense to try to unshare ranges beyond EOF. Constrain the file range parameters here so that we don't have to do that in the callers.

Fixes: 5f4e5752a8a3 ("fs: add iomap_file_dirty") Signed-off-by: Darrick J. Wong djwong@kernel.org Link: https://lore.kernel.org/r/20241002150213.GC21853@frogsfrogsfrogs Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Brian Foster bfoster@redhat.com Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/dax.c | 6 +++++- fs/iomap/buffered-io.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c index becb4a6920c6a..c62acd2812f8d 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -1305,11 +1305,15 @@ int dax_file_unshare(struct inode *inode, loff_t pos, loff_t len, struct iomap_iter iter = { .inode = inode, .pos = pos, - .len = len, .flags = IOMAP_WRITE | IOMAP_UNSHARE | IOMAP_DAX, }; + loff_t size = i_size_read(inode); int ret;

+ if (pos < 0 || pos >= size) + return 0; + + iter.len = min(len, size - pos); while ((ret = iomap_iter(&iter, ops)) > 0) iter.processed = dax_unshare_iter(&iter); return ret; diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c index d465589902790..e817564e80e01 100644 --- a/fs/iomap/buffered-io.c +++ b/fs/iomap/buffered-io.c @@ -1366,11 +1366,15 @@ iomap_file_unshare(struct inode *inode, loff_t pos, loff_t len, struct iomap_iter iter = { .inode = inode, .pos = pos, - .len = len, .flags = IOMAP_WRITE | IOMAP_UNSHARE, }; + loff_t size = i_size_read(inode); int ret;

+ if (pos < 0 || pos >= size) + return 0; + + iter.len = min(len, size - pos); while ((ret = iomap_iter(&iter, ops)) > 0) iter.processed = iomap_unshare_iter(&iter); return ret;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long lucien.xin@gmail.com

[ Upstream commit 8beee4d8dee76b67c75dc91fd8185d91e845c160 ]

In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason.

Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: <TASK> __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline]

Fixes: 5e8f3f703ae4 ("sctp: simplify sctp listening code") Reported-by: syzbot+f4e0f821e3a3b7cee51d@syzkaller.appspotmail.com Signed-off-by: Xin Long lucien.xin@gmail.com Acked-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Link: https://patch.msgid.link/a93e655b3c153dc8945d7a812e6d8ab0d52b7aa0.1727729391... Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sctp/socket.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/sctp/socket.c b/net/sctp/socket.c index c009383369b26..cefac9eaddc30 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -8552,8 +8552,10 @@ static int sctp_listen_start(struct sock *sk, int backlog) */ inet_sk_set_state(sk, SCTP_SS_LISTENING); if (!ep->base.bind_addr.port) { - if (sctp_autobind(sk)) + if (sctp_autobind(sk)) { + inet_sk_set_state(sk, SCTP_SS_CLOSED); return -EAGAIN; + } } else { if (sctp_get_port(sk, inet_sk(sk)->inet_num)) { inet_sk_set_state(sk, SCTP_SS_CLOSED);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marc Ferland marc.ferland@sonatest.com

[ Upstream commit ee1691d0ae103ba7fd9439800ef454674fadad27 ]

xiic_start_xfer can fail for different reasons:

- EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg - ETIMEDOUT: timed-out trying to clear the RX fifo - EINVAL: wrong clock settings

Both EINVAL and ETIMEDOUT will currently print a specific error message followed by a generic one, for example:

Failed to clear rx fifo Error xiic_start_xfer

however EBUSY will simply output the generic message:

Error xiic_start_xfer

which is not really helpful.

This commit adds a new error message when a busy condition is detected and also removes the generic message since it does not provide any relevant information to the user.

Signed-off-by: Marc Ferland marc.ferland@sonatest.com Acked-by: Michal Simek michal.simek@amd.com Signed-off-by: Andi Shyti andi.shyti@kernel.org Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-xiic.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 71391b590adae..19468565120e1 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -1105,8 +1105,11 @@ static int xiic_start_xfer(struct xiic_i2c *i2c, struct i2c_msg *msgs, int num) mutex_lock(&i2c->lock);

ret = xiic_busy(i2c); - if (ret) + if (ret) { + dev_err(i2c->adap.dev.parent, + "cannot start a transfer while busy\n"); goto out; + }

i2c->tx_msg = msgs; i2c->rx_msg = NULL; @@ -1164,10 +1167,8 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) return err;

err = xiic_start_xfer(i2c, msgs, num); - if (err < 0) { - dev_err(adap->dev.parent, "Error xiic_start_xfer\n"); + if (err < 0) goto out; - }

err = wait_for_completion_timeout(&i2c->completion, XIIC_XFER_TIMEOUT); mutex_lock(&i2c->lock);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig hch@lst.de

[ Upstream commit 667ea36378cf7f669044b27871c496e1559c872a ]

QUEUE_FLAG_NOMERGES isn't really a driver interface, but a user tunable. There also isn't any good reason to set it in the loop driver.

The original commit adding it (5b5e20f421c0b6d "block: loop: set QUEUE_FLAG_NOMERGES for request queue of loop") claims that "It doesn't make sense to enable merge because the I/O submitted to backing file is handled page by page." which of course isn't true for multi-page bvec now, and it never has been for direct I/O, for which commit 40326d8a33d ("block/loop: allow request merge for directio mode") alredy disabled the nomerges flag.

Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Bart Van Assche bvanassche@acm.org Link: https://lore.kernel.org/r/20240627124926.512662-2-hch@lst.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/loop.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 1153721bc7c25..41cfcf9efcfc5 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -211,13 +211,10 @@ static void __loop_update_dio(struct loop_device *lo, bool dio) if (lo->lo_state == Lo_bound) blk_mq_freeze_queue(lo->lo_queue); lo->use_dio = use_dio; - if (use_dio) { - blk_queue_flag_clear(QUEUE_FLAG_NOMERGES, lo->lo_queue); + if (use_dio) lo->lo_flags |= LO_FLAGS_DIRECT_IO; - } else { - blk_queue_flag_set(QUEUE_FLAG_NOMERGES, lo->lo_queue); + else lo->lo_flags &= ~LO_FLAGS_DIRECT_IO; - } if (lo->lo_state == Lo_bound) blk_mq_unfreeze_queue(lo->lo_queue); } @@ -2059,14 +2056,6 @@ static int loop_add(int i) } lo->lo_queue = lo->lo_disk->queue;

- /* - * By default, we do buffer IO, so it doesn't make sense to enable - * merge because the I/O submitted to backing file is handled page by - * page. For directio mode, merge does help to dispatch bigger request - * to underlayer disk. We will enable merge once directio is enabled. - */ - blk_queue_flag_set(QUEUE_FLAG_NOMERGES, lo->lo_queue); - /* * Disable partition scanning by default. The in-kernel partition * scanning can be requested individually per-device during its

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrei Simion andrei.simion@microchip.com

[ Upstream commit 09cfc6a532d249a51d3af5022d37ebbe9c3d31f6 ]

Update the driver to prevent alsa-restore.service from failing when reading data from /var/lib/alsa/asound.state at boot. Ensure that the restoration of ALSA mixer configurations is skipped if substream->runtime is NULL.

Fixes: 50291652af52 ("ASoC: atmel: mchp-pdmc: add PDMC driver") Signed-off-by: Andrei Simion andrei.simion@microchip.com Link: https://patch.msgid.link/20240924081237.50046-1-andrei.simion@microchip.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/atmel/mchp-pdmc.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/sound/soc/atmel/mchp-pdmc.c b/sound/soc/atmel/mchp-pdmc.c index dcc4e14b3dde2..206bbb5aaab5d 100644 --- a/sound/soc/atmel/mchp-pdmc.c +++ b/sound/soc/atmel/mchp-pdmc.c @@ -285,6 +285,9 @@ static int mchp_pdmc_chmap_ctl_put(struct snd_kcontrol *kcontrol, if (!substream) return -ENODEV;

+ if (!substream->runtime) + return 0; /* just for avoiding error from alsactl restore */ + map = mchp_pdmc_chmap_get(substream, info); if (!map) return -EINVAL;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 368e4663c557de4a33f321b44e7eeec0a21b2e4e ]

"assigned" and "assigned->name" are allocated in snd_mixer_oss_proc_write() using kmalloc() and kstrdup(), so there is no point in using kfree_const() to free these resources.

Switch to the more standard kfree() to free these resources.

This could avoid a memory leak.

Fixes: 454f5ec1d2b7 ("ALSA: mixer: oss: Constify snd_mixer_oss_assign_table definition") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://patch.msgid.link/63ac20f64234b7c9ea87a7fa9baf41e8255852f7.1727374631... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/core/oss/mixer_oss.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c index 6a0508093ea68..81af725ea40e5 100644 --- a/sound/core/oss/mixer_oss.c +++ b/sound/core/oss/mixer_oss.c @@ -901,8 +901,8 @@ static void snd_mixer_oss_slot_free(struct snd_mixer_oss_slot *chn) struct slot *p = chn->private_data; if (p) { if (p->allocated && p->assigned) { - kfree_const(p->assigned->name); - kfree_const(p->assigned); + kfree(p->assigned->name); + kfree(p->assigned); } kfree(p); }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pali Rohár pali@kernel.org

[ Upstream commit c9432ad5e32f066875b1bf95939c363bc46d6a45 ]

If CREATE was successful but SMB2_OP_SET_REPARSE failed then remove the intermediate object created by CREATE. Otherwise empty object stay on the server when reparse call failed.

This ensures that if the creating of special files is unsupported by the server then no empty file stay on the server as a result of unsupported operation.

Fixes: 102466f303ff ("smb: client: allow creating special files via reparse points") Signed-off-by: Pali Rohár pali@kernel.org Acked-by: Paulo Alcantara (Red Hat) pc@manguebit.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/smb2inode.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/fs/smb/client/smb2inode.c b/fs/smb/client/smb2inode.c index 11a1c53c64e0b..a6dab60e2c01e 100644 --- a/fs/smb/client/smb2inode.c +++ b/fs/smb/client/smb2inode.c @@ -1205,9 +1205,12 @@ struct inode *smb2_get_reparse_inode(struct cifs_open_info_data *data, struct cifs_sb_info *cifs_sb = CIFS_SB(sb); struct cifsFileInfo *cfile; struct inode *new = NULL; + int out_buftype[4] = {}; + struct kvec out_iov[4] = {}; struct kvec in_iov[2]; int cmds[2]; int rc; + int i;

oparms = CIFS_OPARMS(cifs_sb, tcon, full_path, SYNCHRONIZE | DELETE | @@ -1228,7 +1231,7 @@ struct inode *smb2_get_reparse_inode(struct cifs_open_info_data *data, cmds[1] = SMB2_OP_POSIX_QUERY_INFO; cifs_get_writable_path(tcon, full_path, FIND_WR_ANY, &cfile); rc = smb2_compound_op(xid, tcon, cifs_sb, full_path, &oparms, - in_iov, cmds, 2, cfile, NULL, NULL, NULL); + in_iov, cmds, 2, cfile, out_iov, out_buftype, NULL); if (!rc) { rc = smb311_posix_get_inode_info(&new, full_path, data, sb, xid); @@ -1237,12 +1240,29 @@ struct inode *smb2_get_reparse_inode(struct cifs_open_info_data *data, cmds[1] = SMB2_OP_QUERY_INFO; cifs_get_writable_path(tcon, full_path, FIND_WR_ANY, &cfile); rc = smb2_compound_op(xid, tcon, cifs_sb, full_path, &oparms, - in_iov, cmds, 2, cfile, NULL, NULL, NULL); + in_iov, cmds, 2, cfile, out_iov, out_buftype, NULL); if (!rc) { rc = cifs_get_inode_info(&new, full_path, data, sb, xid, NULL); } } + + + /* + * If CREATE was successful but SMB2_OP_SET_REPARSE failed then + * remove the intermediate object created by CREATE. Otherwise + * empty object stay on the server when reparse call failed. + */ + if (rc && + out_iov[0].iov_base != NULL && out_buftype[0] != CIFS_NO_BUFFER && + ((struct smb2_hdr *)out_iov[0].iov_base)->Status == STATUS_SUCCESS && + (out_iov[1].iov_base == NULL || out_buftype[1] == CIFS_NO_BUFFER || + ((struct smb2_hdr *)out_iov[1].iov_base)->Status != STATUS_SUCCESS)) + smb2_unlink(xid, tcon, full_path, cifs_sb, NULL); + + for (i = 0; i < ARRAY_SIZE(out_buftype); i++) + free_rsp_buf(out_buftype[i], out_iov[i].iov_base); + return rc ? ERR_PTR(rc) : new; }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai tiwai@suse.de

[ Upstream commit 1c801e7f77445bc56e5e1fec6191fd4503534787 ]

Some time ago, we introduced the obey_preferred_dacs flag for choosing the DAC/pin pairs specified by the driver instead of parsing the paths. This works as expected, per se, but there have been a few cases where we forgot to set this flag while preferred_dacs table is already set up. It ended up with incorrect wiring and made us wondering why it doesn't work.

Basically, when the preferred_dacs table is provided, it means that the driver really wants to wire up to follow that. That is, the presence of the preferred_dacs table itself is already a "do-it" flag.

In this patch, we simply replace the evaluation of obey_preferred_dacs flag with the presence of preferred_dacs table for fixing the misbehavior. Another patch to drop of the obsoleted flag will follow.

Fixes: 242d990c158d ("ALSA: hda/generic: Add option to enforce preferred_dacs pairs") Link: https://bugzilla.suse.com/show_bug.cgi?id=1219803 Link: https://patch.msgid.link/20241001121439.26060-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/hda_generic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 9cff87dfbecbb..b34d84fedcc8a 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -1383,7 +1383,7 @@ static int try_assign_dacs(struct hda_codec *codec, int num_outs, struct nid_path *path; hda_nid_t pin = pins[i];

- if (!spec->obey_preferred_dacs) { + if (!spec->preferred_dacs) { path = snd_hda_get_path_from_idx(codec, path_idx[i]); if (path) { badness += assign_out_path_ctls(codec, path); @@ -1395,7 +1395,7 @@ static int try_assign_dacs(struct hda_codec *codec, int num_outs, if (dacs[i]) { if (is_dac_already_used(codec, dacs[i])) badness += bad->shared_primary; - } else if (spec->obey_preferred_dacs) { + } else if (spec->preferred_dacs) { badness += BAD_NO_PRIMARY_DAC; }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rodrigo Vivi rodrigo.vivi@intel.com

[ Upstream commit cffa8e83df9fe525afad1e1099097413f9174f57 ]

The pci state was saved, but not restored. Restore right after the power state transition request like every other driver.

v2: Use right fixes tag, since this was there initialy, but accidentally removed.

Fixes: f6761c68c0ac ("drm/xe/display: Improve s2idle handling.") Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Lucas De Marchi lucas.demarchi@intel.com Reviewed-by: Jonathan Cavitt jonathan.cavitt@intel.com Signed-off-by: Rodrigo Vivi rodrigo.vivi@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20240912214507.456897-1-rodrig... Signed-off-by: Maarten Lankhorst maarten.lankhorst@linux.intel.com (cherry picked from commit ec2d1539e159f53eae708e194c449cfefa004994) Signed-off-by: Lucas De Marchi lucas.demarchi@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/xe/xe_pci.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c index f326dbb1cecd9..99824e19a376f 100644 --- a/drivers/gpu/drm/xe/xe_pci.c +++ b/drivers/gpu/drm/xe/xe_pci.c @@ -868,6 +868,8 @@ static int xe_pci_resume(struct device *dev) if (err) return err;

+ pci_restore_state(pdev); + err = pci_enable_device(pdev); if (err) return err;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zhanjun Dong zhanjun.dong@intel.com

[ Upstream commit 7257d9c9a3c6cfe26c428e9b7ae21d61f2f55a79 ]

xe_migrate_copy designed to copy content of TTM resources. When source resource is null, it will trigger a NULL pointer dereference in xe_migrate_copy. To avoid this situation, update lacks source flag to true for this case, the flag will trigger xe_migrate_clear rather than xe_migrate_copy.

Issue trace: <7> [317.089847] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 14, sizes: 4194304 & 4194304 <7> [317.089945] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 15, sizes: 4194304 & 4194304 <1> [317.128055] BUG: kernel NULL pointer dereference, address: 0000000000000010 <1> [317.128064] #PF: supervisor read access in kernel mode <1> [317.128066] #PF: error_code(0x0000) - not-present page <6> [317.128069] PGD 0 P4D 0 <4> [317.128071] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4> [317.128074] CPU: 1 UID: 0 PID: 1440 Comm: kunit_try_catch Tainted: G U N 6.11.0-rc7-xe #1 <4> [317.128078] Tainted: [U]=USER, [N]=TEST <4> [317.128080] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D80.2407291239 07/29/2024 <4> [317.128082] RIP: 0010:xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128158] Code: 00 00 48 89 8d e0 fe ff ff 48 8b 40 10 4c 89 85 c8 fe ff ff 44 88 8d bd fe ff ff 65 48 8b 3c 25 28 00 00 00 48 89 7d d0 31 ff <8b> 79 10 48 89 85 a0 fe ff ff 48 8b 00 48 89 b5 d8 fe ff ff 83 ff <4> [317.128162] RSP: 0018:ffffc9000167f9f0 EFLAGS: 00010246 <4> [317.128164] RAX: ffff8881120d8028 RBX: ffff88814d070428 RCX: 0000000000000000 <4> [317.128166] RDX: ffff88813cb99c00 RSI: 0000000004000000 RDI: 0000000000000000 <4> [317.128168] RBP: ffffc9000167fbb8 R08: ffff88814e7b1f08 R09: 0000000000000001 <4> [317.128170] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88814e7b1f08 <4> [317.128172] R13: ffff88814e7b1f08 R14: ffff88813cb99c00 R15: 0000000000000001 <4> [317.128174] FS: 0000000000000000(0000) GS:ffff88846f280000(0000) knlGS:0000000000000000 <4> [317.128176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [317.128178] CR2: 0000000000000010 CR3: 000000011f676004 CR4: 0000000000770ef0 <4> [317.128180] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4> [317.128182] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 <4> [317.128184] PKRU: 55555554 <4> [317.128185] Call Trace: <4> [317.128187] <TASK> <4> [317.128189] ? show_regs+0x67/0x70 <4> [317.128194] ? __die_body+0x20/0x70 <4> [317.128196] ? __die+0x2b/0x40 <4> [317.128198] ? page_fault_oops+0x15f/0x4e0 <4> [317.128203] ? do_user_addr_fault+0x3fb/0x970 <4> [317.128205] ? lock_acquire+0xc7/0x2e0 <4> [317.128209] ? exc_page_fault+0x87/0x2b0 <4> [317.128212] ? asm_exc_page_fault+0x27/0x30 <4> [317.128216] ? xe_migrate_copy+0x66/0x13e0 [xe] <4> [317.128263] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128265] ? __lock_acquire+0xb9d/0x26f0 <4> [317.128267] ? sg_free_append_table+0x20/0x80 <4> [317.128271] ? lock_acquire+0xc7/0x2e0 <4> [317.128273] ? mark_held_locks+0x4d/0x80 <4> [317.128275] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128278] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128281] ? __pm_runtime_resume+0x60/0xa0 <4> [317.128284] xe_bo_move+0x682/0xc50 [xe] <4> [317.128315] ? lock_is_held_type+0xaa/0x120 <4> [317.128318] ttm_bo_handle_move_mem+0xe5/0x1a0 [ttm] <4> [317.128324] ttm_bo_validate+0xd1/0x1a0 [ttm] <4> [317.128328] shrink_test_run_device+0x721/0xc10 [xe] <4> [317.128360] ? find_held_lock+0x31/0x90 <4> [317.128363] ? lock_release+0xd1/0x2a0 <4> [317.128365] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] <4> [317.128370] xe_bo_shrink_kunit+0x11/0x20 [xe] <4> [317.128397] kunit_try_run_case+0x6e/0x150 [kunit] <4> [317.128400] ? trace_hardirqs_on+0x1e/0xd0 <4> [317.128402] ? _raw_spin_unlock_irqrestore+0x31/0x60 <4> [317.128404] kunit_generic_run_threadfn_adapter+0x1e/0x40 [kunit] <4> [317.128407] kthread+0xf5/0x130 <4> [317.128410] ? __pfx_kthread+0x10/0x10 <4> [317.128412] ret_from_fork+0x39/0x60 <4> [317.128415] ? __pfx_kthread+0x10/0x10 <4> [317.128416] ret_from_fork_asm+0x1a/0x30 <4> [317.128420] </TASK>

Fixes: 266c85885263 ("drm/xe/xe2: Handle flat ccs move for igfx.") Signed-off-by: Zhanjun Dong zhanjun.dong@intel.com Reviewed-by: Thomas Hellström thomas.hellstrom@linux.intel.com Signed-off-by: Matt Roper matthew.d.roper@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20240927161308.862323-2-zhanju... (cherry picked from commit 59a1c9c7e1d02b43b415ea92627ce095b7c79e47) Signed-off-by: Lucas De Marchi lucas.demarchi@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/xe/xe_bo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/xe/xe_bo.c b/drivers/gpu/drm/xe/xe_bo.c index f5e3012eff20d..97506bf9f5e0c 100644 --- a/drivers/gpu/drm/xe/xe_bo.c +++ b/drivers/gpu/drm/xe/xe_bo.c @@ -653,8 +653,8 @@ static int xe_bo_move(struct ttm_buffer_object *ttm_bo, bool evict, tt_has_data = ttm && (ttm_tt_is_populated(ttm) || (ttm->page_flags & TTM_TT_FLAG_SWAPPED));

- move_lacks_source = handle_system_ccs ? (!bo->ccs_cleared) : - (!mem_type_is_vram(old_mem_type) && !tt_has_data); + move_lacks_source = !old_mem || (handle_system_ccs ? (!bo->ccs_cleared) : + (!mem_type_is_vram(old_mem_type) && !tt_has_data));

needs_clear = (ttm && ttm->page_flags & TTM_TT_FLAG_ZERO_ALLOC) || (!ttm && ttm_bo->type == ttm_bo_type_device);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pali Rohár pali@kernel.org

[ Upstream commit d3a49f60917323228f8fdeee313260ef14f94df7 ]

NFS-style symlinks have target location always stored in NFS/UNIX form where backslash means the real UNIX backslash and not the SMB path separator.

So do not mangle slash and backslash content of NFS-style symlink during readlink() syscall as it is already in the correct Linux form.

This fixes interoperability of NFS-style symlinks with backslashes created by Linux NFS3 client throw Windows NFS server and retrieved by Linux SMB client throw Windows SMB server, where both Windows servers exports the same directory.

Fixes: d5ecebc4900d ("smb3: Allow query of symlinks stored as reparse points") Acked-by: Paulo Alcantara (Red Hat) pc@manguebit.com Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/reparse.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/fs/smb/client/reparse.c b/fs/smb/client/reparse.c index cfa03c166de8c..ad0e0de9a165d 100644 --- a/fs/smb/client/reparse.c +++ b/fs/smb/client/reparse.c @@ -335,7 +335,6 @@ static int parse_reparse_posix(struct reparse_posix_data *buf, cifs_sb->local_nls); if (!data->symlink_target) return -ENOMEM; - convert_delimiter(data->symlink_target, '/'); cifs_dbg(FYI, "%s: target path: %s\n", __func__, data->symlink_target); break;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 9df39a872c462ea07a3767ebd0093c42b2ff78a2 ]

If get_bpos() fails, it is likely that the corresponding error code should be returned.

Fixes: a6970bb1dd99 ("ALSA: gus: Convert to the new PCM ops") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://patch.msgid.link/d9ca841edad697154afa97c73a5d7a14919330d9.1727984008... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/isa/gus/gus_pcm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/isa/gus/gus_pcm.c b/sound/isa/gus/gus_pcm.c index 850544725da79..d55c3dc229c0e 100644 --- a/sound/isa/gus/gus_pcm.c +++ b/sound/isa/gus/gus_pcm.c @@ -378,7 +378,7 @@ static int snd_gf1_pcm_playback_copy(struct snd_pcm_substream *substream,

bpos = get_bpos(pcmp, voice, pos, len); if (bpos < 0) - return pos; + return bpos; if (copy_from_iter(runtime->dma_area + bpos, len, src) != len) return -EFAULT; return playback_copy_ack(substream, bpos, len); @@ -395,7 +395,7 @@ static int snd_gf1_pcm_playback_silence(struct snd_pcm_substream *substream, bpos = get_bpos(pcmp, voice, pos, len); if (bpos < 0) - return pos; + return bpos; snd_pcm_format_set_silence(runtime->format, runtime->dma_area + bpos, bytes_to_samples(runtime, count)); return playback_copy_ack(substream, bpos, len);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Kandybka d.kandybka@gmail.com

[ Upstream commit 3f66f26703093886db81f0610b97a6794511917c ]

In 'ath9k_get_et_stats()', promote TX stats counters to 'u64' to avoid possible integer overflow. Compile tested only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Kandybka d.kandybka@gmail.com Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://patch.msgid.link/20240725111743.14422-1-d.kandybka@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index bf3da631c69fd..51abc470125b3 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -1325,11 +1325,11 @@ void ath9k_get_et_stats(struct ieee80211_hw *hw, struct ath_softc *sc = hw->priv; int i = 0;

- data[i++] = (sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_pkts_all + + data[i++] = ((u64)sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_pkts_all + sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BK)].tx_pkts_all + sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VI)].tx_pkts_all + sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VO)].tx_pkts_all); - data[i++] = (sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_bytes_all + + data[i++] = ((u64)sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_bytes_all + sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BK)].tx_bytes_all + sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VI)].tx_bytes_all + sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VO)].tx_bytes_all);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Toke Høiland-Jørgensen toke@redhat.com

[ Upstream commit 94745807f3ebd379f23865e6dab196f220664179 ]

Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call.

The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it.

Reported-by: syzbot+98afa303be379af6cdb2@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen toke@redhat.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://patch.msgid.link/20240812142447.12328-1-toke@toke.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/hif_usb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 0c7841f952287..a3733c9b484e4 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -716,8 +716,7 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb) }

resubmit: - skb_reset_tail_pointer(skb); - skb_trim(skb, 0); + __skb_set_length(skb, 0);

usb_anchor_urb(urb, &hif_dev->rx_submitted); ret = usb_submit_urb(urb, GFP_ATOMIC); @@ -754,8 +753,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) case -ESHUTDOWN: goto free_skb; default: - skb_reset_tail_pointer(skb); - skb_trim(skb, 0); + __skb_set_length(skb, 0);

goto resubmit; }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herbert Xu herbert@gondor.apana.org.au

[ Upstream commit 311eea7e37c4c0b44b557d0c100860a03b4eab65 ]

Use the generic crypto_authenc_extractkeys helper instead of custom parsing code that is slightly broken. Also fix a number of memory leaks by moving memory allocation from setkey to init_tfm (setkey can be called multiple times over the life of a tfm).

Finally accept all hash key lengths by running the digest over extra-long keys.

Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- .../crypto/marvell/octeontx/otx_cptvf_algs.c | 261 +++++++----------- 1 file changed, 93 insertions(+), 168 deletions(-)

diff --git a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c index 3c5d577d8f0d5..0a1b85ad0057f 100644 --- a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c +++ b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c @@ -17,7 +17,6 @@ #include <crypto/sha2.h> #include <crypto/xts.h> #include <crypto/scatterwalk.h> -#include <linux/rtnetlink.h> #include <linux/sort.h> #include <linux/module.h> #include "otx_cptvf.h" @@ -66,6 +65,8 @@ static struct cpt_device_table ae_devices = { .count = ATOMIC_INIT(0) };

+static struct otx_cpt_sdesc *alloc_sdesc(struct crypto_shash *alg); + static inline int get_se_device(struct pci_dev **pdev, int *cpu_num) { int count, ret = 0; @@ -509,44 +510,61 @@ static int cpt_aead_init(struct crypto_aead *tfm, u8 cipher_type, u8 mac_type) ctx->cipher_type = cipher_type; ctx->mac_type = mac_type;

+ switch (ctx->mac_type) { + case OTX_CPT_SHA1: + ctx->hashalg = crypto_alloc_shash("sha1", 0, 0); + break; + + case OTX_CPT_SHA256: + ctx->hashalg = crypto_alloc_shash("sha256", 0, 0); + break; + + case OTX_CPT_SHA384: + ctx->hashalg = crypto_alloc_shash("sha384", 0, 0); + break; + + case OTX_CPT_SHA512: + ctx->hashalg = crypto_alloc_shash("sha512", 0, 0); + break; + } + + if (IS_ERR(ctx->hashalg)) + return PTR_ERR(ctx->hashalg); + + crypto_aead_set_reqsize_dma(tfm, sizeof(struct otx_cpt_req_ctx)); + + if (!ctx->hashalg) + return 0; + /* * When selected cipher is NULL we use HMAC opcode instead of * FLEXICRYPTO opcode therefore we don't need to use HASH algorithms * for calculating ipad and opad */ if (ctx->cipher_type != OTX_CPT_CIPHER_NULL) { - switch (ctx->mac_type) { - case OTX_CPT_SHA1: - ctx->hashalg = crypto_alloc_shash("sha1", 0, - CRYPTO_ALG_ASYNC); - if (IS_ERR(ctx->hashalg)) - return PTR_ERR(ctx->hashalg); - break; - - case OTX_CPT_SHA256: - ctx->hashalg = crypto_alloc_shash("sha256", 0, - CRYPTO_ALG_ASYNC); - if (IS_ERR(ctx->hashalg)) - return PTR_ERR(ctx->hashalg); - break; + int ss = crypto_shash_statesize(ctx->hashalg);

- case OTX_CPT_SHA384: - ctx->hashalg = crypto_alloc_shash("sha384", 0, - CRYPTO_ALG_ASYNC); - if (IS_ERR(ctx->hashalg)) - return PTR_ERR(ctx->hashalg); - break; + ctx->ipad = kzalloc(ss, GFP_KERNEL); + if (!ctx->ipad) { + crypto_free_shash(ctx->hashalg); + return -ENOMEM; + }

- case OTX_CPT_SHA512: - ctx->hashalg = crypto_alloc_shash("sha512", 0, - CRYPTO_ALG_ASYNC); - if (IS_ERR(ctx->hashalg)) - return PTR_ERR(ctx->hashalg); - break; + ctx->opad = kzalloc(ss, GFP_KERNEL); + if (!ctx->opad) { + kfree(ctx->ipad); + crypto_free_shash(ctx->hashalg); + return -ENOMEM; } }

- crypto_aead_set_reqsize_dma(tfm, sizeof(struct otx_cpt_req_ctx)); + ctx->sdesc = alloc_sdesc(ctx->hashalg); + if (!ctx->sdesc) { + kfree(ctx->opad); + kfree(ctx->ipad); + crypto_free_shash(ctx->hashalg); + return -ENOMEM; + }

return 0; } @@ -602,8 +620,7 @@ static void otx_cpt_aead_exit(struct crypto_aead *tfm)

kfree(ctx->ipad); kfree(ctx->opad); - if (ctx->hashalg) - crypto_free_shash(ctx->hashalg); + crypto_free_shash(ctx->hashalg); kfree(ctx->sdesc); }

@@ -699,7 +716,7 @@ static inline void swap_data64(void *buf, u32 len) *dst = cpu_to_be64p(src); }

-static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad) +static int swap_pad(u8 mac_type, u8 *pad) { struct sha512_state *sha512; struct sha256_state *sha256; @@ -707,22 +724,19 @@ static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad)

switch (mac_type) { case OTX_CPT_SHA1: - sha1 = (struct sha1_state *) in_pad; + sha1 = (struct sha1_state *)pad; swap_data32(sha1->state, SHA1_DIGEST_SIZE); - memcpy(out_pad, &sha1->state, SHA1_DIGEST_SIZE); break;

case OTX_CPT_SHA256: - sha256 = (struct sha256_state *) in_pad; + sha256 = (struct sha256_state *)pad; swap_data32(sha256->state, SHA256_DIGEST_SIZE); - memcpy(out_pad, &sha256->state, SHA256_DIGEST_SIZE); break;

case OTX_CPT_SHA384: case OTX_CPT_SHA512: - sha512 = (struct sha512_state *) in_pad; + sha512 = (struct sha512_state *)pad; swap_data64(sha512->state, SHA512_DIGEST_SIZE); - memcpy(out_pad, &sha512->state, SHA512_DIGEST_SIZE); break;

default: @@ -732,55 +746,53 @@ static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad) return 0; }

-static int aead_hmac_init(struct crypto_aead *cipher) +static int aead_hmac_init(struct crypto_aead *cipher, + struct crypto_authenc_keys *keys) { struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher); - int state_size = crypto_shash_statesize(ctx->hashalg); int ds = crypto_shash_digestsize(ctx->hashalg); int bs = crypto_shash_blocksize(ctx->hashalg); - int authkeylen = ctx->auth_key_len; + int authkeylen = keys->authkeylen; u8 *ipad = NULL, *opad = NULL; - int ret = 0, icount = 0; + int icount = 0; + int ret;

- ctx->sdesc = alloc_sdesc(ctx->hashalg); - if (!ctx->sdesc) - return -ENOMEM; + if (authkeylen > bs) { + ret = crypto_shash_digest(&ctx->sdesc->shash, keys->authkey, + authkeylen, ctx->key); + if (ret) + return ret; + authkeylen = ds; + } else + memcpy(ctx->key, keys->authkey, authkeylen);

- ctx->ipad = kzalloc(bs, GFP_KERNEL); - if (!ctx->ipad) { - ret = -ENOMEM; - goto calc_fail; - } + ctx->enc_key_len = keys->enckeylen; + ctx->auth_key_len = authkeylen;

- ctx->opad = kzalloc(bs, GFP_KERNEL); - if (!ctx->opad) { - ret = -ENOMEM; - goto calc_fail; - } + if (ctx->cipher_type == OTX_CPT_CIPHER_NULL) + return keys->enckeylen ? -EINVAL : 0;

- ipad = kzalloc(state_size, GFP_KERNEL); - if (!ipad) { - ret = -ENOMEM; - goto calc_fail; + switch (keys->enckeylen) { + case AES_KEYSIZE_128: + ctx->key_type = OTX_CPT_AES_128_BIT; + break; + case AES_KEYSIZE_192: + ctx->key_type = OTX_CPT_AES_192_BIT; + break; + case AES_KEYSIZE_256: + ctx->key_type = OTX_CPT_AES_256_BIT; + break; + default: + /* Invalid key length */ + return -EINVAL; }

- opad = kzalloc(state_size, GFP_KERNEL); - if (!opad) { - ret = -ENOMEM; - goto calc_fail; - } + memcpy(ctx->key + authkeylen, keys->enckey, keys->enckeylen);

- if (authkeylen > bs) { - ret = crypto_shash_digest(&ctx->sdesc->shash, ctx->key, - authkeylen, ipad); - if (ret) - goto calc_fail; - - authkeylen = ds; - } else { - memcpy(ipad, ctx->key, authkeylen); - } + ipad = ctx->ipad; + opad = ctx->opad;

+ memcpy(ipad, ctx->key, authkeylen); memset(ipad + authkeylen, 0, bs - authkeylen); memcpy(opad, ipad, bs);

@@ -798,7 +810,7 @@ static int aead_hmac_init(struct crypto_aead *cipher) crypto_shash_init(&ctx->sdesc->shash); crypto_shash_update(&ctx->sdesc->shash, ipad, bs); crypto_shash_export(&ctx->sdesc->shash, ipad); - ret = copy_pad(ctx->mac_type, ctx->ipad, ipad); + ret = swap_pad(ctx->mac_type, ipad); if (ret) goto calc_fail;

@@ -806,25 +818,9 @@ static int aead_hmac_init(struct crypto_aead *cipher) crypto_shash_init(&ctx->sdesc->shash); crypto_shash_update(&ctx->sdesc->shash, opad, bs); crypto_shash_export(&ctx->sdesc->shash, opad); - ret = copy_pad(ctx->mac_type, ctx->opad, opad); - if (ret) - goto calc_fail; - - kfree(ipad); - kfree(opad); - - return 0; + ret = swap_pad(ctx->mac_type, opad);

calc_fail: - kfree(ctx->ipad); - ctx->ipad = NULL; - kfree(ctx->opad); - ctx->opad = NULL; - kfree(ipad); - kfree(opad); - kfree(ctx->sdesc); - ctx->sdesc = NULL; - return ret; }

@@ -832,57 +828,15 @@ static int otx_cpt_aead_cbc_aes_sha_setkey(struct crypto_aead *cipher, const unsigned char *key, unsigned int keylen) { - struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher); - struct crypto_authenc_key_param *param; - int enckeylen = 0, authkeylen = 0; - struct rtattr *rta = (void *)key; - int status = -EINVAL; - - if (!RTA_OK(rta, keylen)) - goto badkey; - - if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) - goto badkey; - - if (RTA_PAYLOAD(rta) < sizeof(*param)) - goto badkey; - - param = RTA_DATA(rta); - enckeylen = be32_to_cpu(param->enckeylen); - key += RTA_ALIGN(rta->rta_len); - keylen -= RTA_ALIGN(rta->rta_len); - if (keylen < enckeylen) - goto badkey; + struct crypto_authenc_keys authenc_keys; + int status;

- if (keylen > OTX_CPT_MAX_KEY_SIZE) - goto badkey; - - authkeylen = keylen - enckeylen; - memcpy(ctx->key, key, keylen); - - switch (enckeylen) { - case AES_KEYSIZE_128: - ctx->key_type = OTX_CPT_AES_128_BIT; - break; - case AES_KEYSIZE_192: - ctx->key_type = OTX_CPT_AES_192_BIT; - break; - case AES_KEYSIZE_256: - ctx->key_type = OTX_CPT_AES_256_BIT; - break; - default: - /* Invalid key length */ - goto badkey; - } - - ctx->enc_key_len = enckeylen; - ctx->auth_key_len = authkeylen; - - status = aead_hmac_init(cipher); + status = crypto_authenc_extractkeys(&authenc_keys, key, keylen); if (status) goto badkey;

- return 0; + status = aead_hmac_init(cipher, &authenc_keys); + badkey: return status; } @@ -891,36 +845,7 @@ static int otx_cpt_aead_ecb_null_sha_setkey(struct crypto_aead *cipher, const unsigned char *key, unsigned int keylen) { - struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher); - struct crypto_authenc_key_param *param; - struct rtattr *rta = (void *)key; - int enckeylen = 0; - - if (!RTA_OK(rta, keylen)) - goto badkey; - - if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) - goto badkey; - - if (RTA_PAYLOAD(rta) < sizeof(*param)) - goto badkey; - - param = RTA_DATA(rta); - enckeylen = be32_to_cpu(param->enckeylen); - key += RTA_ALIGN(rta->rta_len); - keylen -= RTA_ALIGN(rta->rta_len); - if (enckeylen != 0) - goto badkey; - - if (keylen > OTX_CPT_MAX_KEY_SIZE) - goto badkey; - - memcpy(ctx->key, key, keylen); - ctx->enc_key_len = enckeylen; - ctx->auth_key_len = keylen; - return 0; -badkey: - return -EINVAL; + return otx_cpt_aead_cbc_aes_sha_setkey(cipher, key, keylen); }

static int otx_cpt_aead_gcm_aes_setkey(struct crypto_aead *cipher,

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Aleksandr Mishin amishin@t-argos.ru

[ Upstream commit 62fdaf9e8056e9a9e6fe63aa9c816ec2122d60c6 ]

In ice_sched_add_root_node() and ice_sched_add_node() there are calls to devm_kcalloc() in order to allocate memory for array of pointers to 'ice_sched_node' structure. But incorrect types are used as sizeof() arguments in these calls (structures instead of pointers) which leads to over allocation of memory.

Adjust over allocation of memory by correcting types in devm_kcalloc() sizeof() arguments.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reviewed-by: Przemek Kitszel przemyslaw.kitszel@intel.com Signed-off-by: Aleksandr Mishin amishin@t-argos.ru Reviewed-by: Simon Horman horms@kernel.org Tested-by: Pucha Himasekhar Reddy himasekharx.reddy.pucha@intel.com (A Contingent worker at Intel) Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ice/ice_sched.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c index ecf8f5d602921..6ca13c5dcb14e 100644 --- a/drivers/net/ethernet/intel/ice/ice_sched.c +++ b/drivers/net/ethernet/intel/ice/ice_sched.c @@ -28,9 +28,8 @@ ice_sched_add_root_node(struct ice_port_info *pi, if (!root) return -ENOMEM;

- /* coverity[suspicious_sizeof] */ root->children = devm_kcalloc(ice_hw_to_dev(hw), hw->max_children[0], - sizeof(*root), GFP_KERNEL); + sizeof(*root->children), GFP_KERNEL); if (!root->children) { devm_kfree(ice_hw_to_dev(hw), root); return -ENOMEM; @@ -186,10 +185,9 @@ ice_sched_add_node(struct ice_port_info *pi, u8 layer, if (!node) return -ENOMEM; if (hw->max_children[layer]) { - /* coverity[suspicious_sizeof] */ node->children = devm_kcalloc(ice_hw_to_dev(hw), hw->max_children[layer], - sizeof(*node), GFP_KERNEL); + sizeof(*node->children), GFP_KERNEL); if (!node->children) { devm_kfree(ice_hw_to_dev(hw), node); return -ENOMEM;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit 1c7e1068a7c9c39ed27636db93e71911e0045419 ]

This shouldn't happen at all, since in station mode all MMPDUs go through the TXQ for the STA, and not this function. There may or may not be a race in mac80211 through which this might happen for some frames while a station is being added, but in that case we can also just drop the frame and pretend the STA didn't exist yet.

Also, the code is simply wrong since it uses deflink, and it's not easy to fix it since the mvmvif->ap_sta pointer cannot be used without the mutex, and perhaps the right link might not even be known.

Just drop the frame at that point instead of trying to fix it up.

Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb88... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 83551d962a46c..6673a4e467c0b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -834,20 +834,10 @@ void iwl_mvm_mac_tx(struct ieee80211_hw *hw, if (ieee80211_is_mgmt(hdr->frame_control)) sta = NULL;

- /* If there is no sta, and it's not offchannel - send through AP */ + /* this shouldn't even happen: just drop */ if (!sta && info->control.vif->type == NL80211_IFTYPE_STATION && - !offchannel) { - struct iwl_mvm_vif *mvmvif = - iwl_mvm_vif_from_mac80211(info->control.vif); - u8 ap_sta_id = READ_ONCE(mvmvif->deflink.ap_sta_id); - - if (ap_sta_id < mvm->fw->ucode_capa.num_stations) { - /* mac80211 holds rcu read lock */ - sta = rcu_dereference(mvm->fw_id_to_mac_id[ap_sta_id]); - if (IS_ERR_OR_NULL(sta)) - goto drop; - } - } + !offchannel) + goto drop;

if (tmp_sta && !sta && link_id != IEEE80211_LINK_UNSPECIFIED && !ieee80211_is_probe_resp(hdr->frame_control)) {

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeongjun Park aha310510@gmail.com

[ Upstream commit 0fa5e94a1811d68fbffa0725efe6d4ca62c03d12 ]

During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free.

Therefore, to solve this, you need to change it to list_for_each_entry_safe.

Signed-off-by: Jeongjun Park aha310510@gmail.com Link: https://patch.msgid.link/20240822181109.2577354-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/hash.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/xen-netback/hash.c b/drivers/net/xen-netback/hash.c index ff96f22648efd..45ddce35f6d2c 100644 --- a/drivers/net/xen-netback/hash.c +++ b/drivers/net/xen-netback/hash.c @@ -95,7 +95,7 @@ static u32 xenvif_new_hash(struct xenvif *vif, const u8 *data,

static void xenvif_flush_hash(struct xenvif *vif) { - struct xenvif_hash_cache_entry *entry; + struct xenvif_hash_cache_entry *entry, *n; unsigned long flags;

if (xenvif_hash_cache_size == 0) @@ -103,8 +103,7 @@ static void xenvif_flush_hash(struct xenvif *vif)

spin_lock_irqsave(&vif->hash.cache.lock, flags);

- list_for_each_entry_rcu(entry, &vif->hash.cache.list, link, - lockdep_is_held(&vif->hash.cache.lock)) { + list_for_each_entry_safe(entry, n, &vif->hash.cache.list, link) { list_del_rcu(&entry->link); vif->hash.cache.count--; kfree_rcu(entry, rcu);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit 5680cf8d34e1552df987e2f4bb1bff0b2a8c8b11 ]

Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in hns_mac_get_info().

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20240827144421.52852-3-krzysztof.kozlowski@linaro.o... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c index f75668c479351..616a2768e5048 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c @@ -933,6 +933,7 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb) mac_cb->cpld_ctrl = NULL; } else { syscon = syscon_node_to_regmap(cpld_args.np); + of_node_put(cpld_args.np); if (IS_ERR_OR_NULL(syscon)) { dev_dbg(mac_cb->dev, "no cpld-syscon found!\n"); mac_cb->cpld_ctrl = NULL;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Seiji Nishikawa snishika@redhat.com

[ Upstream commit 0a2ed70a549e61c5181bad5db418d223b68ae932 ]

The kernel occasionally crashes in cpumask_clear_cpu(), which is called within exit_round_robin(), because when executing clear_bit(nr, addr) with nr set to 0xffffffff, the address calculation may cause misalignment within the memory, leading to access to an invalid memory address.

---------- BUG: unable to handle kernel paging request at ffffffffe0740618 ... CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1 ... RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad] Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31 RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8 R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e FS: 0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? acpi_pad_add+0x120/0x120 [acpi_pad] kthread+0x10b/0x130 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x40 ... CR2: ffffffffe0740618

crash> dis -lr ffffffffc0726923 ... /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114 0xffffffffc0726918 <power_saving_thread+776>: mov %r12d,%r12d /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325 0xffffffffc072691b <power_saving_thread+779>: mov -0x3f8d7de0(,%r12,4),%eax /usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80 0xffffffffc0726923 <power_saving_thread+787>: lock btr %rax,0x19cf4(%rip) # 0xffffffffc0740620 <pad_busy_cpus_bits>

crash> px tsk_in_cpu[14] $66 = 0xffffffff

crash> px 0xffffffffc072692c+0x19cf4 $99 = 0xffffffffc0740620

crash> sym 0xffffffffc0740620 ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad]

crash> px pad_busy_cpus_bits[0] $42 = 0xfffc0 ----------

To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling cpumask_clear_cpu() in exit_round_robin(), just as it is done in round_robin_cpu().

Signed-off-by: Seiji Nishikawa snishika@redhat.com Link: https://patch.msgid.link/20240825141352.25280-1-snishika@redhat.com [ rjw: Subject edit, avoid updates to the same value ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpi_pad.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index bd1ad07f02907..e84509b19f94d 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -132,8 +132,10 @@ static void exit_round_robin(unsigned int tsk_index) { struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);

- cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus); - tsk_in_cpu[tsk_index] = -1; + if (tsk_in_cpu[tsk_index] != -1) { + cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus); + tsk_in_cpu[tsk_index] = -1; + } }

static unsigned int idle_pct = 5; /* percentage */

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Armin Wolf W_Armin@gmx.de

[ Upstream commit e6169a8ffee8a012badd8c703716e761ce851b15 ]

ACPICA commit 1280045754264841b119a5ede96cd005bc09b5a7

If acpi_ps_get_next_field() fails, the previously created field list needs to be properly disposed before returning the status code.

Link: https://github.com/acpica/acpica/commit/12800457 Signed-off-by: Armin Wolf W_Armin@gmx.de [ rjw: Rename local variable to avoid compiler confusion ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/psargs.c | 39 ++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)

diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 7debfd5ce0d86..28582adfc0aca 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -25,6 +25,8 @@ acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state); static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state *parser_state);

+static void acpi_ps_free_field_list(union acpi_parse_object *start); + /******************************************************************************* * * FUNCTION: acpi_ps_get_next_package_length @@ -683,6 +685,39 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state return_PTR(field); }

+/******************************************************************************* + * + * FUNCTION: acpi_ps_free_field_list + * + * PARAMETERS: start - First Op in field list + * + * RETURN: None. + * + * DESCRIPTION: Free all Op objects inside a field list. + * + ******************************************************************************/ + +static void acpi_ps_free_field_list(union acpi_parse_object *start) +{ + union acpi_parse_object *cur = start; + union acpi_parse_object *next; + union acpi_parse_object *arg; + + while (cur) { + next = cur->common.next; + + /* AML_INT_CONNECTION_OP can have a single argument */ + + arg = acpi_ps_get_arg(cur, 0); + if (arg) { + acpi_ps_free_op(arg); + } + + acpi_ps_free_op(cur); + cur = next; + } +} + /******************************************************************************* * * FUNCTION: acpi_ps_get_next_arg @@ -751,6 +786,10 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state, while (parser_state->aml < parser_state->pkg_end) { field = acpi_ps_get_next_field(parser_state); if (!field) { + if (arg) { + acpi_ps_free_field_list(arg); + } + return_ACPI_STATUS(AE_NO_MEMORY); }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vitaly Lifshits vitaly.lifshits@intel.com

[ Upstream commit 0a6ad4d9e1690c7faa3a53f762c877e477093657 ]

Occasionally when the system goes into pm_suspend, the suspend might fail due to a PHY access error on the network adapter. Previously, this would have caused the whole system to fail to go to a low power state. An example of this was reported in the following Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205015

[ 1663.694828] e1000e 0000:00:19.0 eth0: Failed to disable ULP [ 1664.731040] asix 2-3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1 [ 1665.093513] e1000e 0000:00:19.0 eth0: Hardware Error [ 1665.596760] e1000e 0000:00:19.0: pci_pm_resume+0x0/0x80 returned 0 after 2975399 usecs

and then the system never recovers from it, and all the following suspend failed due to this [22909.393854] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x760 [e1000e] returns -2 [22909.393858] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -2 [22909.393861] PM: Device 0000:00:1f.6 failed to suspend async: error -2

This can be avoided by changing the return values of __e1000_shutdown and e1000e_pm_suspend functions so that they always return 0 (success). This is consistent with what other drivers do.

If the e1000e driver encounters a hardware error during suspend, potential side effects include slightly higher power draw or non-working wake on LAN. This is preferred to a system-level suspend failure, and a warning message is written to the system log, so that the user can be aware that the LAN controller experienced a problem during suspend.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205015 Suggested-by: Dima Ruinskiy dima.ruinskiy@intel.com Signed-off-by: Vitaly Lifshits vitaly.lifshits@intel.com Tested-by: Mor Bar-Gabay morx.bar.gabay@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e1000e/netdev.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 3cd161c6672be..e23eedc791d66 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6671,8 +6671,10 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { /* enable wakeup by the PHY */ retval = e1000_init_phy_wakeup(adapter, wufc); - if (retval) - return retval; + if (retval) { + e_err("Failed to enable wakeup\n"); + goto skip_phy_configurations; + } } else { /* enable wakeup by the MAC */ ew32(WUFC, wufc); @@ -6693,8 +6695,10 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) * or broadcast. */ retval = e1000_enable_ulp_lpt_lp(hw, !runtime); - if (retval) - return retval; + if (retval) { + e_err("Failed to enable ULP\n"); + goto skip_phy_configurations; + } } }

@@ -6726,6 +6730,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) hw->phy.ops.release(hw); }

+skip_phy_configurations: /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ @@ -6968,15 +6973,13 @@ static int e1000e_pm_suspend(struct device *dev) e1000e_pm_freeze(dev);

rc = __e1000_shutdown(pdev, false); - if (rc) { - e1000e_pm_thaw(dev); - } else { + if (!rc) { /* Introduce S0ix implementation */ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS) e1000e_s0ix_entry_flow(adapter); }

- return rc; + return 0; }

static int e1000e_pm_resume(struct device *dev)

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felix Fietkau nbd@nbd.name

[ Upstream commit 256cbd26fbafb30ba3314339106e5c594e9bd5f9 ]

Avoids firmware race condition.

Link: https://patch.msgid.link/20240827093011.18621-7-nbd@nbd.name Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c index 9599adf104b16..758249b20c222 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c @@ -690,13 +690,17 @@ int mt7915_mcu_add_tx_ba(struct mt7915_dev *dev, { struct mt7915_sta *msta = (struct mt7915_sta *)params->sta->drv_priv; struct mt7915_vif *mvif = msta->vif; + int ret;

+ mt76_worker_disable(&dev->mt76.tx_worker); if (enable && !params->amsdu) msta->wcid.amsdu = false; + ret = mt76_connac_mcu_sta_ba(&dev->mt76, &mvif->mt76, params, + MCU_EXT_CMD(STA_REC_UPDATE), + enable, true); + mt76_worker_enable(&dev->mt76.tx_worker);

- return mt76_connac_mcu_sta_ba(&dev->mt76, &mvif->mt76, params, - MCU_EXT_CMD(STA_REC_UPDATE), - enable, true); + return ret; }

int mt7915_mcu_add_rx_ba(struct mt7915_dev *dev,

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hilda Wu hildawu@realtek.com

[ Upstream commit bdf9557f70e7512bb2f754abf90d9e9958745316 ]

Add the support ID (0x0489, 0xe122) to usb_device_id table for Realtek RTL8852C.

The device info from /sys/kernel/debug/usb/devices as below.

T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e122 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms

Signed-off-by: Hilda Wu hildawu@realtek.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index c41b86608ba86..dd7d9b7fd1c42 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -539,6 +539,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH },

/* Realtek 8852BE Bluetooth devices */ { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit eb7b0f12e13ba99e64e3a690c2166895ed63b437 ]

The Panasonic Toughbook CF-18 advertises both native and vendor backlight control interfaces. But only the vendor one actually works.

acpi_video_get_backlight_type() will pick the non working native backlight by default, add a quirk to select the working vendor backlight instead.

Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://patch.msgid.link/20240907124419.21195-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/video_detect.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 75a5f559402f8..428a7399fe04a 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -254,6 +254,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "PCG-FRV35"), }, }, + { + .callback = video_detect_force_vendor, + /* Panasonic Toughbook CF-18 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Matsushita Electric Industrial"), + DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"), + }, + },

/* * Toshiba models with Transflective display, these need to use

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konstantin Ovsepian ovs@ovs.to

[ Upstream commit 9bce8005ec0dcb23a58300e8522fe4a31da606fa ]

Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function:

UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ...

Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits.

Reported-by: Breno Leitao leitao@debian.org Signed-off-by: Konstantin Ovsepian ovs@ovs.to Acked-by: Tejun Heo tj@kernel.org Link: https://lore.kernel.org/r/20240822154137.2627818-1-ovs@ovs.to Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-iocost.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/block/blk-iocost.c b/block/blk-iocost.c index 690ca99dfaca6..5a6098a3db57e 100644 --- a/block/blk-iocost.c +++ b/block/blk-iocost.c @@ -2076,7 +2076,7 @@ static void ioc_forgive_debts(struct ioc *ioc, u64 usage_us_sum, int nr_debtors, struct ioc_now *now) { struct ioc_gq *iocg; - u64 dur, usage_pct, nr_cycles; + u64 dur, usage_pct, nr_cycles, nr_cycles_shift;

/* if no debtor, reset the cycle */ if (!nr_debtors) { @@ -2138,10 +2138,12 @@ static void ioc_forgive_debts(struct ioc *ioc, u64 usage_us_sum, int nr_debtors, old_debt = iocg->abs_vdebt; old_delay = iocg->delay;

+ nr_cycles_shift = min_t(u64, nr_cycles, BITS_PER_LONG - 1); if (iocg->abs_vdebt) - iocg->abs_vdebt = iocg->abs_vdebt >> nr_cycles ?: 1; + iocg->abs_vdebt = iocg->abs_vdebt >> nr_cycles_shift ?: 1; + if (iocg->delay) - iocg->delay = iocg->delay >> nr_cycles ?: 1; + iocg->delay = iocg->delay >> nr_cycles_shift ?: 1;

iocg_kick_waitq(iocg, true, now);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Karthikeyan Periyasamy quic_periyasa@quicinc.com

[ Upstream commit 69f253e46af98af17e3efa3e5dfa72fcb7d1983d ]

Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx() function access ath11k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath11k_dp_process_rx() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy quic_periyasa@quicinc.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://patch.msgid.link/20240704070811.4186543-3-quic_periyasa@quicinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/dp_rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index aabde24d87632..88c7a7289d06e 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -2697,7 +2697,7 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id, if (unlikely(push_reason != HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION)) { dev_kfree_skb_any(msdu); - ab->soc_stats.hal_reo_error[dp->reo_dst_ring[ring_id].ring_id]++; + ab->soc_stats.hal_reo_error[ring_id]++; continue; }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki rafael.j.wysocki@intel.com

[ Upstream commit dc171114926ec390ab90f46534545420ec03e458 ]

It is not particularly useful to release locks (the EC mutex and the ACPI global lock, if present) and re-acquire them immediately thereafter during EC address space accesses in acpi_ec_space_handler().

First, releasing them for a while before grabbing them again does not really help anyone because there may not be enough time for another thread to acquire them.

Second, if another thread successfully acquires them and carries out a new EC write or read in the middle if an operation region access in progress, it may confuse the EC firmware, especially after the burst mode has been enabled.

Finally, manipulating the locks after writing or reading every single byte of data is overhead that it is better to avoid.

Accordingly, modify the code to carry out EC address space accesses entirely without releasing the locks.

Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Reviewed-by: Hans de Goede hdegoede@redhat.com Link: https://patch.msgid.link/12473338.O9o76ZdvQC@rjwysocki.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/ec.c | 55 +++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 49 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 38d2f6e6b12b4..25399f6dde7e2 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -783,6 +783,9 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, unsigned long tmp; int ret = 0;

+ if (t->rdata) + memset(t->rdata, 0, t->rlen); + /* start transaction */ spin_lock_irqsave(&ec->lock, tmp); /* Enable GPE for command processing (IBF=0/OBF=1) */ @@ -819,8 +822,6 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)

if (!ec || (!t) || (t->wlen && !t->wdata) || (t->rlen && !t->rdata)) return -EINVAL; - if (t->rdata) - memset(t->rdata, 0, t->rlen);

mutex_lock(&ec->mutex); if (ec->global_lock) { @@ -847,7 +848,7 @@ static int acpi_ec_burst_enable(struct acpi_ec *ec) .wdata = NULL, .rdata = &d, .wlen = 0, .rlen = 1};

- return acpi_ec_transaction(ec, &t); + return acpi_ec_transaction_unlocked(ec, &t); }

static int acpi_ec_burst_disable(struct acpi_ec *ec) @@ -857,7 +858,7 @@ static int acpi_ec_burst_disable(struct acpi_ec *ec) .wlen = 0, .rlen = 0};

return (acpi_ec_read_status(ec) & ACPI_EC_FLAG_BURST) ? - acpi_ec_transaction(ec, &t) : 0; + acpi_ec_transaction_unlocked(ec, &t) : 0; }

static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data) @@ -873,6 +874,19 @@ static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data) return result; }

+static int acpi_ec_read_unlocked(struct acpi_ec *ec, u8 address, u8 *data) +{ + int result; + u8 d; + struct transaction t = {.command = ACPI_EC_COMMAND_READ, + .wdata = &address, .rdata = &d, + .wlen = 1, .rlen = 1}; + + result = acpi_ec_transaction_unlocked(ec, &t); + *data = d; + return result; +} + static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data) { u8 wdata[2] = { address, data }; @@ -883,6 +897,16 @@ static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data) return acpi_ec_transaction(ec, &t); }

+static int acpi_ec_write_unlocked(struct acpi_ec *ec, u8 address, u8 data) +{ + u8 wdata[2] = { address, data }; + struct transaction t = {.command = ACPI_EC_COMMAND_WRITE, + .wdata = wdata, .rdata = NULL, + .wlen = 2, .rlen = 0}; + + return acpi_ec_transaction_unlocked(ec, &t); +} + int ec_read(u8 addr, u8 *val) { int err; @@ -1323,6 +1347,7 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, struct acpi_ec *ec = handler_context; int result = 0, i, bytes = bits / 8; u8 *value = (u8 *)value64; + u32 glk;

if ((address > 0xFF) || !value || !handler_context) return AE_BAD_PARAMETER; @@ -1330,13 +1355,25 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (function != ACPI_READ && function != ACPI_WRITE) return AE_BAD_PARAMETER;

+ mutex_lock(&ec->mutex); + + if (ec->global_lock) { + acpi_status status; + + status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk); + if (ACPI_FAILURE(status)) { + result = -ENODEV; + goto unlock; + } + } + if (ec->busy_polling || bits > 8) acpi_ec_burst_enable(ec);

for (i = 0; i < bytes; ++i, ++address, ++value) { result = (function == ACPI_READ) ? - acpi_ec_read(ec, address, value) : - acpi_ec_write(ec, address, *value); + acpi_ec_read_unlocked(ec, address, value) : + acpi_ec_write_unlocked(ec, address, *value); if (result < 0) break; } @@ -1344,6 +1381,12 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (ec->busy_polling || bits > 8) acpi_ec_burst_disable(ec);

+ if (ec->global_lock) + acpi_release_global_lock(glk); + +unlock: + mutex_unlock(&ec->mutex); + switch (result) { case -EINVAL: return AE_BAD_PARAMETER;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Simon Horman horms@kernel.org

[ Upstream commit 6555a2a9212be6983d2319d65276484f7c5f431a ]

Smatch reports that copying media_name and if_name to name_parts may overwrite the destination.

.../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16) .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16)

This does seem to be the case so guard against this possibility by using strscpy() and failing if truncation occurs.

Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge")

Compile tested only.

Reviewed-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Simon Horman horms@kernel.org Link: https://patch.msgid.link/20240801-tipic-overrun-v2-1-c5b869d1f074@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/tipc/bearer.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c index 5a526ebafeb4b..3c9e25f6a1d22 100644 --- a/net/tipc/bearer.c +++ b/net/tipc/bearer.c @@ -163,8 +163,12 @@ static int bearer_name_validate(const char *name,

/* return bearer name components, if necessary */ if (name_parts) { - strcpy(name_parts->media_name, media_name); - strcpy(name_parts->if_name, if_name); + if (strscpy(name_parts->media_name, media_name, + TIPC_MAX_MEDIA_NAME) < 0) + return 0; + if (strscpy(name_parts->if_name, if_name, + TIPC_MAX_IF_NAME) < 0) + return 0; } return 1; }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Simon Horman horms@kernel.org

[ Upstream commit ffff7ee843c351ce71d6e0d52f0f20bea35e18c9 ]

This corrects an out-by-one error in the maximum length of the package version string. The size argument of snprintf includes space for the trailing '\0' byte, so there is no need to allow extra space for it by reducing the value of the size argument by 1.

Found by inspection. Compile tested only.

Signed-off-by: Simon Horman horms@kernel.org Reviewed-by: Michael Chan michael.chan@broadcom.com Link: https://patch.msgid.link/20240813-bnxt-str-v2-1-872050a157e7@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 79c09c1cdf936..0032c4ebd7e12 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -4146,7 +4146,7 @@ static void bnxt_get_pkgver(struct net_device *dev)

if (!bnxt_get_pkginfo(dev, buf, sizeof(buf))) { len = strlen(bp->fw_ver_str); - snprintf(bp->fw_ver_str + len, FW_VER_STR_LEN - len - 1, + snprintf(bp->fw_ver_str + len, FW_VER_STR_LEN - len, "/pkg %s", buf); } }

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ping-Ke Shih pkshih@realtek.com

[ Upstream commit 45742881f9eee2a4daeb6008e648a460dd3742cd ]

Coverity reported that u8 rx_mask << 24 will become signed 32 bits, which casting to unsigned 64 bits will do sign extension. For example, putting 0x80000000 (signed 32 bits) to a u64 variable will become 0xFFFFFFFF_80000000.

The real case we meet is: rx_mask[0...3] = ff ff 00 00 ra_mask = 0xffffffff_ff0ff000

After this fix: rx_mask[0...3] = ff ff 00 00 ra_mask = 0x00000000_ff0ff000

Fortunately driver does bitwise-AND with incorrect ra_mask and supported rates (1ss and 2ss rate only) afterward, so the final rate mask of original code is still correct.

Addresses-Coverity-ID: 1504762 ("Unintended sign extension")

Signed-off-by: Ping-Ke Shih pkshih@realtek.com Link: https://patch.msgid.link/20240809072012.84152-5-pkshih@realtek.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtw89/phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c index a82b4c56a6f45..f7c6b019b5be4 100644 --- a/drivers/net/wireless/realtek/rtw89/phy.c +++ b/drivers/net/wireless/realtek/rtw89/phy.c @@ -352,8 +352,8 @@ static void rtw89_phy_ra_sta_update(struct rtw89_dev *rtwdev, csi_mode = RTW89_RA_RPT_MODE_HT; ra_mask |= ((u64)sta->deflink.ht_cap.mcs.rx_mask[3] << 48) | ((u64)sta->deflink.ht_cap.mcs.rx_mask[2] << 36) | - (sta->deflink.ht_cap.mcs.rx_mask[1] << 24) | - (sta->deflink.ht_cap.mcs.rx_mask[0] << 12); + ((u64)sta->deflink.ht_cap.mcs.rx_mask[1] << 24) | + ((u64)sta->deflink.ht_cap.mcs.rx_mask[0] << 12); high_rate_masks = rtw89_ra_mask_ht_rates; if (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_RX_STBC) stbc_en = 1;

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Reinecke hare@kernel.org

[ Upstream commit 79559c75332458985ab8a21f11b08bf7c9b833b0 ]

TP8018 introduced a new TLS PSK identifier version (version 1), which appended a PSK hash value to the existing identifier (cf NVMe TCP specification v1.1, section 3.6.1.3 'TLS PSK and PSK Identity Derivation'). An original (version 0) identifier has the form:

NVMe0<type><hmac> <hostnqn> <subsysnqn>

and a version 1 identifier has the form:

NVMe1<type><hmac> <hostnqn> <subsysnqn> <hash>

This patch modifies the lookup algorthm to compare only the first part of the identifier (excluding the hash value) to handle both version 0 and version 1 identifiers. And the spec declares 'version 0' identifiers obsolete, so the lookup algorithm is modified to prever v1 identifiers.

Signed-off-by: Hannes Reinecke hare@kernel.org Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/common/keyring.c | 36 +++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/nvme/common/keyring.c b/drivers/nvme/common/keyring.c index 6f7e7a8fa5ae4..05e89307c8aa3 100644 --- a/drivers/nvme/common/keyring.c +++ b/drivers/nvme/common/keyring.c @@ -36,14 +36,12 @@ static bool nvme_tls_psk_match(const struct key *key, pr_debug("%s: no key description\n", __func__); return false; } - match_len = strlen(key->description); - pr_debug("%s: id %s len %zd\n", __func__, key->description, match_len); - if (!match_data->raw_data) { pr_debug("%s: no match data\n", __func__); return false; } match_id = match_data->raw_data; + match_len = strlen(match_id); pr_debug("%s: match '%s' '%s' len %zd\n", __func__, match_id, key->description, match_len); return !memcmp(key->description, match_id, match_len); @@ -71,7 +69,7 @@ static struct key_type nvme_tls_psk_key_type = {

static struct key *nvme_tls_psk_lookup(struct key *keyring, const char *hostnqn, const char *subnqn, - int hmac, bool generated) + u8 hmac, u8 psk_ver, bool generated) { char *identity; size_t identity_len = (NVMF_NQN_SIZE) * 2 + 11; @@ -82,8 +80,8 @@ static struct key *nvme_tls_psk_lookup(struct key *keyring, if (!identity) return ERR_PTR(-ENOMEM);

- snprintf(identity, identity_len, "NVMe0%c%02d %s %s", - generated ? 'G' : 'R', hmac, hostnqn, subnqn); + snprintf(identity, identity_len, "NVMe%u%c%02u %s %s", + psk_ver, generated ? 'G' : 'R', hmac, hostnqn, subnqn);

if (!keyring) keyring = nvme_keyring; @@ -107,21 +105,38 @@ static struct key *nvme_tls_psk_lookup(struct key *keyring, /* * NVMe PSK priority list * - * 'Retained' PSKs (ie 'generated == false') - * should be preferred to 'generated' PSKs, - * and SHA-384 should be preferred to SHA-256. + * 'Retained' PSKs (ie 'generated == false') should be preferred to 'generated' + * PSKs, PSKs with hash (psk_ver 1) should be preferred to PSKs without hash + * (psk_ver 0), and SHA-384 should be preferred to SHA-256. */ static struct nvme_tls_psk_priority_list { bool generated; + u8 psk_ver; enum nvme_tcp_tls_cipher cipher; } nvme_tls_psk_prio[] = { { .generated = false, + .psk_ver = 1, + .cipher = NVME_TCP_TLS_CIPHER_SHA384, }, + { .generated = false, + .psk_ver = 1, + .cipher = NVME_TCP_TLS_CIPHER_SHA256, }, + { .generated = false, + .psk_ver = 0, .cipher = NVME_TCP_TLS_CIPHER_SHA384, }, { .generated = false, + .psk_ver = 0, + .cipher = NVME_TCP_TLS_CIPHER_SHA256, }, + { .generated = true, + .psk_ver = 1, + .cipher = NVME_TCP_TLS_CIPHER_SHA384, }, + { .generated = true, + .psk_ver = 1, .cipher = NVME_TCP_TLS_CIPHER_SHA256, }, { .generated = true, + .psk_ver = 0, .cipher = NVME_TCP_TLS_CIPHER_SHA384, }, { .generated = true, + .psk_ver = 0, .cipher = NVME_TCP_TLS_CIPHER_SHA256, }, };

@@ -137,10 +152,11 @@ key_serial_t nvme_tls_psk_default(struct key *keyring,

for (prio = 0; prio < ARRAY_SIZE(nvme_tls_psk_prio); prio++) { bool generated = nvme_tls_psk_prio[prio].generated; + u8 ver = nvme_tls_psk_prio[prio].psk_ver; enum nvme_tcp_tls_cipher cipher = nvme_tls_psk_prio[prio].cipher;

tls_key = nvme_tls_psk_lookup(keyring, hostnqn, subnqn, - cipher, generated); + cipher, ver, generated); if (!IS_ERR(tls_key)) { tls_key_id = tls_key->serial; key_put(tls_key);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Reinecke hare@kernel.org

[ Upstream commit 5bc46b49c828a6dfaab80b71ecb63fe76a1096d2 ]

key_lookup() will always return a key, even if that key is revoked or invalidated. So check for invalid keys before continuing.

Signed-off-by: Hannes Reinecke hare@kernel.org Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/common/keyring.c | 22 ++++++++++++++++++++++ drivers/nvme/host/Kconfig | 1 + drivers/nvme/host/fabrics.c | 2 +- drivers/nvme/host/tcp.c | 2 +- include/linux/nvme-keyring.h | 6 +++++- 5 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/common/keyring.c b/drivers/nvme/common/keyring.c index 05e89307c8aa3..ed5167f942d89 100644 --- a/drivers/nvme/common/keyring.c +++ b/drivers/nvme/common/keyring.c @@ -20,6 +20,28 @@ key_serial_t nvme_keyring_id(void) } EXPORT_SYMBOL_GPL(nvme_keyring_id);

+static bool nvme_tls_psk_revoked(struct key *psk) +{ + return test_bit(KEY_FLAG_REVOKED, &psk->flags) || + test_bit(KEY_FLAG_INVALIDATED, &psk->flags); +} + +struct key *nvme_tls_key_lookup(key_serial_t key_id) +{ + struct key *key = key_lookup(key_id); + + if (IS_ERR(key)) { + pr_err("key id %08x not found\n", key_id); + return key; + } + if (nvme_tls_psk_revoked(key)) { + pr_err("key id %08x revoked\n", key_id); + return ERR_PTR(-EKEYREVOKED); + } + return key; +} +EXPORT_SYMBOL_GPL(nvme_tls_key_lookup); + static void nvme_tls_psk_describe(const struct key *key, struct seq_file *m) { seq_puts(m, key->description); diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig index b309c8be720f4..854eb26ac3db9 100644 --- a/drivers/nvme/host/Kconfig +++ b/drivers/nvme/host/Kconfig @@ -110,6 +110,7 @@ config NVME_HOST_AUTH bool "NVMe over Fabrics In-Band Authentication in host side" depends on NVME_CORE select NVME_AUTH + select NVME_KEYRING if NVME_TCP_TLS help This provides support for NVMe over Fabrics In-Band Authentication in host side. diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index b5a4b5fd573e0..3e3db6a6524e0 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -650,7 +650,7 @@ static struct key *nvmf_parse_key(int key_id) return ERR_PTR(-EINVAL); }

- key = key_lookup(key_id); + key = nvme_tls_key_lookup(key_id); if (IS_ERR(key)) pr_err("key id %08x not found\n", key_id); else diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index f551609691807..8c79af3ed1f23 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1596,7 +1596,7 @@ static void nvme_tcp_tls_done(void *data, int status, key_serial_t pskid) goto out_complete; }

- tls_key = key_lookup(pskid); + tls_key = nvme_tls_key_lookup(pskid); if (IS_ERR(tls_key)) { dev_warn(ctrl->ctrl.device, "queue %d: Invalid key %x\n", qid, pskid); diff --git a/include/linux/nvme-keyring.h b/include/linux/nvme-keyring.h index e10333d78dbbe..19d2b256180fd 100644 --- a/include/linux/nvme-keyring.h +++ b/include/linux/nvme-keyring.h @@ -12,7 +12,7 @@ key_serial_t nvme_tls_psk_default(struct key *keyring, const char *hostnqn, const char *subnqn);

key_serial_t nvme_keyring_id(void); - +struct key *nvme_tls_key_lookup(key_serial_t key_id); #else

static inline key_serial_t nvme_tls_psk_default(struct key *keyring, @@ -24,5 +24,9 @@ static inline key_serial_t nvme_keyring_id(void) { return 0; } +static inline struct key *nvme_tls_key_lookup(key_serial_t key_id) +{ + return ERR_PTR(-ENOTSUPP); +} #endif /* !CONFIG_NVME_KEYRING */ #endif /* _NVME_KEYRING_H */

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herbert Xu herbert@gondor.apana.org.au

[ Upstream commit 3c44d31cb34ce4eb8311a2e73634d57702948230 ]

Algorithm registration is usually carried out during module init, where as little work as possible should be carried out. The SIMD code violated this rule by allocating a tfm, this then triggers a full test of the algorithm which may dead-lock in certain cases.

SIMD is only allocating the tfm to get at the alg object, which is in fact already available as it is what we are registering. Use that directly and remove the crypto_alloc_tfm call.

Also remove some obsolete and unused SIMD API.

Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/crypto/aes-ce-glue.c | 2 +- arch/arm/crypto/aes-neonbs-glue.c | 2 +- crypto/simd.c | 76 ++++++------------------------- include/crypto/internal/simd.h | 12 +---- 4 files changed, 19 insertions(+), 73 deletions(-)

diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b668c97663ec0..f5b66f4cf45d9 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -711,7 +711,7 @@ static int __init aes_init(void) algname = aes_algs[i].base.cra_name + 2; drvname = aes_algs[i].base.cra_driver_name + 2; basename = aes_algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); + simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto unregister_simds; diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c index f00f042ef3570..0ca94b90bc4ec 100644 --- a/arch/arm/crypto/aes-neonbs-glue.c +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -539,7 +539,7 @@ static int __init aes_init(void) algname = aes_algs[i].base.cra_name + 2; drvname = aes_algs[i].base.cra_driver_name + 2; basename = aes_algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); + simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto unregister_simds; diff --git a/crypto/simd.c b/crypto/simd.c index edaa479a1ec5e..d109866641a26 100644 --- a/crypto/simd.c +++ b/crypto/simd.c @@ -136,27 +136,19 @@ static int simd_skcipher_init(struct crypto_skcipher *tfm) return 0; }

-struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname, +struct simd_skcipher_alg *simd_skcipher_create_compat(struct skcipher_alg *ialg, + const char *algname, const char *drvname, const char *basename) { struct simd_skcipher_alg *salg; - struct crypto_skcipher *tfm; - struct skcipher_alg *ialg; struct skcipher_alg *alg; int err;

- tfm = crypto_alloc_skcipher(basename, CRYPTO_ALG_INTERNAL, - CRYPTO_ALG_INTERNAL | CRYPTO_ALG_ASYNC); - if (IS_ERR(tfm)) - return ERR_CAST(tfm); - - ialg = crypto_skcipher_alg(tfm); - salg = kzalloc(sizeof(*salg), GFP_KERNEL); if (!salg) { salg = ERR_PTR(-ENOMEM); - goto out_put_tfm; + goto out; }

salg->ialg_name = basename; @@ -195,30 +187,16 @@ struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname, if (err) goto out_free_salg;

-out_put_tfm: - crypto_free_skcipher(tfm); +out: return salg;

out_free_salg: kfree(salg); salg = ERR_PTR(err); - goto out_put_tfm; + goto out; } EXPORT_SYMBOL_GPL(simd_skcipher_create_compat);

-struct simd_skcipher_alg *simd_skcipher_create(const char *algname, - const char *basename) -{ - char drvname[CRYPTO_MAX_ALG_NAME]; - - if (snprintf(drvname, CRYPTO_MAX_ALG_NAME, "simd-%s", basename) >= - CRYPTO_MAX_ALG_NAME) - return ERR_PTR(-ENAMETOOLONG); - - return simd_skcipher_create_compat(algname, drvname, basename); -} -EXPORT_SYMBOL_GPL(simd_skcipher_create); - void simd_skcipher_free(struct simd_skcipher_alg *salg) { crypto_unregister_skcipher(&salg->alg); @@ -246,7 +224,7 @@ int simd_register_skciphers_compat(struct skcipher_alg *algs, int count, algname = algs[i].base.cra_name + 2; drvname = algs[i].base.cra_driver_name + 2; basename = algs[i].base.cra_driver_name; - simd = simd_skcipher_create_compat(algname, drvname, basename); + simd = simd_skcipher_create_compat(algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto err_unregister; @@ -383,27 +361,19 @@ static int simd_aead_init(struct crypto_aead *tfm) return 0; }

-struct simd_aead_alg *simd_aead_create_compat(const char *algname, - const char *drvname, - const char *basename) +static struct simd_aead_alg *simd_aead_create_compat(struct aead_alg *ialg, + const char *algname, + const char *drvname, + const char *basename) { struct simd_aead_alg *salg; - struct crypto_aead *tfm; - struct aead_alg *ialg; struct aead_alg *alg; int err;

- tfm = crypto_alloc_aead(basename, CRYPTO_ALG_INTERNAL, - CRYPTO_ALG_INTERNAL | CRYPTO_ALG_ASYNC); - if (IS_ERR(tfm)) - return ERR_CAST(tfm); - - ialg = crypto_aead_alg(tfm); - salg = kzalloc(sizeof(*salg), GFP_KERNEL); if (!salg) { salg = ERR_PTR(-ENOMEM); - goto out_put_tfm; + goto out; }

salg->ialg_name = basename; @@ -442,36 +412,20 @@ struct simd_aead_alg *simd_aead_create_compat(const char *algname, if (err) goto out_free_salg;

-out_put_tfm: - crypto_free_aead(tfm); +out: return salg;

out_free_salg: kfree(salg); salg = ERR_PTR(err); - goto out_put_tfm; -} -EXPORT_SYMBOL_GPL(simd_aead_create_compat); - -struct simd_aead_alg *simd_aead_create(const char *algname, - const char *basename) -{ - char drvname[CRYPTO_MAX_ALG_NAME]; - - if (snprintf(drvname, CRYPTO_MAX_ALG_NAME, "simd-%s", basename) >= - CRYPTO_MAX_ALG_NAME) - return ERR_PTR(-ENAMETOOLONG); - - return simd_aead_create_compat(algname, drvname, basename); + goto out; } -EXPORT_SYMBOL_GPL(simd_aead_create);

-void simd_aead_free(struct simd_aead_alg *salg) +static void simd_aead_free(struct simd_aead_alg *salg) { crypto_unregister_aead(&salg->alg); kfree(salg); } -EXPORT_SYMBOL_GPL(simd_aead_free);

int simd_register_aeads_compat(struct aead_alg *algs, int count, struct simd_aead_alg **simd_algs) @@ -493,7 +447,7 @@ int simd_register_aeads_compat(struct aead_alg *algs, int count, algname = algs[i].base.cra_name + 2; drvname = algs[i].base.cra_driver_name + 2; basename = algs[i].base.cra_driver_name; - simd = simd_aead_create_compat(algname, drvname, basename); + simd = simd_aead_create_compat(algs + i, algname, drvname, basename); err = PTR_ERR(simd); if (IS_ERR(simd)) goto err_unregister; diff --git a/include/crypto/internal/simd.h b/include/crypto/internal/simd.h index d2316242a9884..be97b97a75dd2 100644 --- a/include/crypto/internal/simd.h +++ b/include/crypto/internal/simd.h @@ -14,11 +14,10 @@ struct simd_skcipher_alg; struct skcipher_alg;

-struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname, +struct simd_skcipher_alg *simd_skcipher_create_compat(struct skcipher_alg *ialg, + const char *algname, const char *drvname, const char *basename); -struct simd_skcipher_alg *simd_skcipher_create(const char *algname, - const char *basename); void simd_skcipher_free(struct simd_skcipher_alg *alg);

int simd_register_skciphers_compat(struct skcipher_alg *algs, int count, @@ -32,13 +31,6 @@ void simd_unregister_skciphers(struct skcipher_alg *algs, int count, struct simd_aead_alg; struct aead_alg;

-struct simd_aead_alg *simd_aead_create_compat(const char *algname, - const char *drvname, - const char *basename); -struct simd_aead_alg *simd_aead_create(const char *algname, - const char *basename); -void simd_aead_free(struct simd_aead_alg *alg); - int simd_register_aeads_compat(struct aead_alg *algs, int count, struct simd_aead_alg **simd_algs);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jason Xing kernelxing@tencent.com

[ Upstream commit 0d9e5df4a257afc3a471a82961ace9a22b88295a ]

We found that one close-wait socket was reset by the other side due to a new connection reusing the same port which is beyond our expectation, so we have to investigate the underlying reason.

The following experiment is conducted in the test environment. We limit the port range from 40000 to 40010 and delay the time to close() after receiving a fin from the active close side, which can help us easily reproduce like what happened in production.

Here are three connections captured by tcpdump: 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1 127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1 // a few seconds later, within 60 seconds 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2 127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193 // later, very quickly 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1

As we can see, the first flow is reset because: 1) client starts a new connection, I mean, the second one 2) client tries to find a suitable port which is a timewait socket (its state is timewait, substate is fin_wait2) 3) client occupies that timewait port to send a SYN 4) server finds a corresponding close-wait socket in ehash table, then replies with a challenge ack 5) client sends an RST to terminate this old close-wait socket.

I don't think the port selection algo can choose a FIN_WAIT2 socket when we turn on tcp_tw_reuse because on the server side there remain unread data. In some cases, if one side haven't call close() yet, we should not consider it as expendable and treat it at will.

Even though, sometimes, the server isn't able to call close() as soon as possible like what we expect, it can not be terminated easily, especially due to a second unrelated connection happening.

After this patch, we can see the expected failure if we start a connection when all the ports are occupied in fin_wait2 state: "Ncat: Cannot assign requested address."

Reported-by: Jade Dong jadedong@tencent.com Signed-off-by: Jason Xing kernelxing@tencent.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp_ipv4.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index da0f502553991..7874b3718bc3c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -118,6 +118,9 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp) struct tcp_sock *tp = tcp_sk(sk); int ts_recent_stamp;

+ if (tw->tw_substate == TCP_FIN_WAIT2) + reuse = 0; + if (reuse == 2) { /* Still does not detect *everything* that goes through * lo, since we require a loopback src or dst address

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anjaneyulu pagadala.yesu.anjaneyulu@intel.com

[ Upstream commit ff5aabe7c2a4a4b089a9ced0cb3d0e284963a7dd ]

Block other mcc expect CN from WRDD ACPI.

Signed-off-by: Anjaneyulu pagadala.yesu.anjaneyulu@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20240808232017.fe6ea7aa4b39.I86004687a2963fe26f9907... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 5 +++++ drivers/net/wireless/intel/iwlwifi/fw/regulatory.h | 2 ++ drivers/net/wireless/intel/iwlwifi/fw/uefi.c | 2 +- drivers/net/wireless/intel/iwlwifi/fw/uefi.h | 2 -- 4 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c index ba9e656037a20..9b3d3405fb83d 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c @@ -356,6 +356,11 @@ int iwl_acpi_get_mcc(struct iwl_fw_runtime *fwrt, char *mcc) }

mcc_val = wifi_pkg->package.elements[1].integer.value; + if (mcc_val != BIOS_MCC_CHINA) { + ret = -EINVAL; + IWL_DEBUG_RADIO(fwrt, "ACPI WRDD is supported only for CN\n"); + goto out_free; + }

mcc[0] = (mcc_val >> 8) & 0xff; mcc[1] = mcc_val & 0xff; diff --git a/drivers/net/wireless/intel/iwlwifi/fw/regulatory.h b/drivers/net/wireless/intel/iwlwifi/fw/regulatory.h index 633c9ad9af841..ecf482647617c 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/regulatory.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/regulatory.h @@ -45,6 +45,8 @@ #define IWL_WTAS_ENABLE_IEC_MSK 0x4 #define IWL_WTAS_USA_UHB_MSK BIT(16)

+#define BIOS_MCC_CHINA 0x434e + /* * The profile for revision 2 is a superset of revision 1, which is in * turn a superset of revision 0. So we can store all revisions diff --git a/drivers/net/wireless/intel/iwlwifi/fw/uefi.c b/drivers/net/wireless/intel/iwlwifi/fw/uefi.c index fb982d4fe8510..2cf878f237ac6 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/uefi.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/uefi.c @@ -638,7 +638,7 @@ int iwl_uefi_get_mcc(struct iwl_fw_runtime *fwrt, char *mcc) goto out; }

- if (data->mcc != UEFI_MCC_CHINA) { + if (data->mcc != BIOS_MCC_CHINA) { ret = -EINVAL; IWL_DEBUG_RADIO(fwrt, "UEFI WRDD is supported only for CN\n"); goto out; diff --git a/drivers/net/wireless/intel/iwlwifi/fw/uefi.h b/drivers/net/wireless/intel/iwlwifi/fw/uefi.h index 1f8884ca8997c..e0ef981cd8f28 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/uefi.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/uefi.h @@ -149,8 +149,6 @@ struct uefi_cnv_var_splc { u32 default_pwr_limit; } __packed;

-#define UEFI_MCC_CHINA 0x434e - /* struct uefi_cnv_var_wrdd - WRDD table as defined in UEFI * @revision: the revision of the table * @mcc: country identifier as defined in ISO/IEC 3166-1 Alpha 2 code

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg johannes.berg@intel.com

[ Upstream commit ac35180032fbc5d80b29af00ba4881815ceefcb6 ]

There are a number of places where RCU list iteration is used, but that aren't (always) called with RCU held. Use just list_for_each_entry() in most, and annotate iface iteration with the required locks.

Reviewed-by: Miriam Rachel Korenblit miriam.rachel.korenblit@intel.com Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f80518413534... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/chan.c | 4 +++- net/mac80211/mlme.c | 2 +- net/mac80211/scan.c | 2 +- net/mac80211/util.c | 4 +++- 4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index e6a7ff6ca6797..db5675d24e488 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -281,7 +281,9 @@ ieee80211_get_max_required_bw(struct ieee80211_link_data *link) enum nl80211_chan_width max_bw = NL80211_CHAN_WIDTH_20_NOHT; struct sta_info *sta;

- list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) { + lockdep_assert_wiphy(sdata->local->hw.wiphy); + + list_for_each_entry(sta, &sdata->local->sta_list, list) { if (sdata != sta->sdata && !(sta->sdata->bss && sta->sdata->bss == sdata->bss)) continue; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1faf4d7c115f0..71cc5eb35bfcb 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1020,7 +1020,7 @@ static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, bool disable_mu_mimo = false; struct ieee80211_sub_if_data *other;

- list_for_each_entry_rcu(other, &local->interfaces, list) { + list_for_each_entry(other, &local->interfaces, list) { if (other->vif.bss_conf.mu_mimo_owner) { disable_mu_mimo = true; break; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 1c5d99975ad04..3b2bde6360bcb 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -504,7 +504,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) * the scan was in progress; if there was none this will * just be a no-op for the particular interface. */ - list_for_each_entry_rcu(sdata, &local->interfaces, list) { + list_for_each_entry(sdata, &local->interfaces, list) { if (ieee80211_sdata_running(sdata)) wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work); } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index c11dbe82ae1b3..d10e0c528c1bf 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -751,7 +751,9 @@ static void __iterate_interfaces(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata; bool active_only = iter_flags & IEEE80211_IFACE_ITER_ACTIVE;

- list_for_each_entry_rcu(sdata, &local->interfaces, list) { + list_for_each_entry_rcu(sdata, &local->interfaces, list, + lockdep_is_held(&local->iflist_mtx) || + lockdep_is_held(&local->hw.wiphy->mtx)) { switch (sdata->vif.type) { case NL80211_IFTYPE_MONITOR: if (!(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE))

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Adrian Ratiu adrian.ratiu@collabora.com

[ Upstream commit 41e8149c8892ed1962bd15350b3c3e6e90cba7f4 ]

This adds a Kconfig option and boot param to allow removing the FOLL_FORCE flag from /proc/pid/mem write calls because it can be abused.

The traditional forcing behavior is kept as default because it can break GDB and some other use cases.

Previously we tried a more sophisticated approach allowing distributions to fine-tune /proc/pid/mem behavior, however that got NAK-ed by Linus [1], who prefers this simpler approach with semantics also easier to understand for users.

Link: https://lore.kernel.org/lkml/CAHk-=wiGWLChxYmUA5HrT5aopZrB7_2VTa0NLZcxORgkUe... [1] Cc: Doug Anderson dianders@chromium.org Cc: Jeff Xu jeffxu@google.com Cc: Jann Horn jannh@google.com Cc: Kees Cook kees@kernel.org Cc: Ard Biesheuvel ardb@kernel.org Cc: Christian Brauner brauner@kernel.org Suggested-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Adrian Ratiu adrian.ratiu@collabora.com Link: https://lore.kernel.org/r/20240802080225.89408-1-adrian.ratiu@collabora.com Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../admin-guide/kernel-parameters.txt | 10 +++ fs/proc/base.c | 61 ++++++++++++++++++- security/Kconfig | 32 ++++++++++ 3 files changed, 102 insertions(+), 1 deletion(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index c82446cef8e21..2c8e062eb2ce5 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4791,6 +4791,16 @@ printk.time= Show timing data prefixed to each printk message line Format: <bool> (1/Y/y=enable, 0/N/n=disable)

+ proc_mem.force_override= [KNL] + Format: {always | ptrace | never} + Traditionally /proc/pid/mem allows memory permissions to be + overridden without restrictions. This option may be set to + restrict that. Can be one of: + - 'always': traditional behavior always allows mem overrides. + - 'ptrace': only allow mem overrides for active ptracers. + - 'never': never allow mem overrides. + If not specified, default is the CONFIG_PROC_MEM_* choice. + processor.max_cstate= [HW,ACPI] Limit processor to maximum C-state max_cstate=9 overrides any DMI blacklist limit. diff --git a/fs/proc/base.c b/fs/proc/base.c index 72a1acd03675c..f389c69767fa5 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -85,6 +85,7 @@ #include <linux/elf.h> #include <linux/pid_namespace.h> #include <linux/user_namespace.h> +#include <linux/fs_parser.h> #include <linux/fs_struct.h> #include <linux/slab.h> #include <linux/sched/autogroup.h> @@ -117,6 +118,40 @@ static u8 nlink_tid __ro_after_init; static u8 nlink_tgid __ro_after_init;

+enum proc_mem_force { + PROC_MEM_FORCE_ALWAYS, + PROC_MEM_FORCE_PTRACE, + PROC_MEM_FORCE_NEVER +}; + +static enum proc_mem_force proc_mem_force_override __ro_after_init = + IS_ENABLED(CONFIG_PROC_MEM_NO_FORCE) ? PROC_MEM_FORCE_NEVER : + IS_ENABLED(CONFIG_PROC_MEM_FORCE_PTRACE) ? PROC_MEM_FORCE_PTRACE : + PROC_MEM_FORCE_ALWAYS; + +static const struct constant_table proc_mem_force_table[] __initconst = { + { "always", PROC_MEM_FORCE_ALWAYS }, + { "ptrace", PROC_MEM_FORCE_PTRACE }, + { "never", PROC_MEM_FORCE_NEVER }, + { } +}; + +static int __init early_proc_mem_force_override(char *buf) +{ + if (!buf) + return -EINVAL; + + /* + * lookup_constant() defaults to proc_mem_force_override to preseve + * the initial Kconfig choice in case an invalid param gets passed. + */ + proc_mem_force_override = lookup_constant(proc_mem_force_table, + buf, proc_mem_force_override); + + return 0; +} +early_param("proc_mem.force_override", early_proc_mem_force_override); + struct pid_entry { const char *name; unsigned int len; @@ -835,6 +870,28 @@ static int mem_open(struct inode *inode, struct file *file) return ret; }

+static bool proc_mem_foll_force(struct file *file, struct mm_struct *mm) +{ + struct task_struct *task; + bool ptrace_active = false; + + switch (proc_mem_force_override) { + case PROC_MEM_FORCE_NEVER: + return false; + case PROC_MEM_FORCE_PTRACE: + task = get_proc_task(file_inode(file)); + if (task) { + ptrace_active = READ_ONCE(task->ptrace) && + READ_ONCE(task->mm) == mm && + READ_ONCE(task->parent) == current; + put_task_struct(task); + } + return ptrace_active; + default: + return true; + } +} + static ssize_t mem_rw(struct file *file, char __user *buf, size_t count, loff_t *ppos, int write) { @@ -855,7 +912,9 @@ static ssize_t mem_rw(struct file *file, char __user *buf, if (!mmget_not_zero(mm)) goto free;

- flags = FOLL_FORCE | (write ? FOLL_WRITE : 0); + flags = write ? FOLL_WRITE : 0; + if (proc_mem_foll_force(file, mm)) + flags |= FOLL_FORCE;

while (count > 0) { size_t this_len = min_t(size_t, count, PAGE_SIZE); diff --git a/security/Kconfig b/security/Kconfig index 412e76f1575d0..a93c1a9b7c283 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -19,6 +19,38 @@ config SECURITY_DMESG_RESTRICT

If you are unsure how to answer this question, answer N.

+choice + prompt "Allow /proc/pid/mem access override" + default PROC_MEM_ALWAYS_FORCE + help + Traditionally /proc/pid/mem allows users to override memory + permissions for users like ptrace, assuming they have ptrace + capability. + + This allows people to limit that - either never override, or + require actual active ptrace attachment. + + Defaults to the traditional behavior (for now) + +config PROC_MEM_ALWAYS_FORCE + bool "Traditional /proc/pid/mem behavior" + help + This allows /proc/pid/mem accesses to override memory mapping + permissions if you have ptrace access rights. + +config PROC_MEM_FORCE_PTRACE + bool "Require active ptrace() use for access override" + help + This allows /proc/pid/mem accesses to override memory mapping + permissions for active ptracers like gdb. + +config PROC_MEM_NO_FORCE + bool "Never" + help + Never override memory mapping permissions + +endchoice + config SECURITY bool "Enable different security models" depends on SYSFS

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Mätje stefan.maetje@esd.eu

[ Upstream commit 2423cc20087ae9a7b7af575aa62304ef67cad7b6 ]

This patch moves the evaluation of data[IFLA_CAN_CTRLMODE] in function can_changelink in front of the evaluation of data[IFLA_CAN_BITTIMING].

This avoids a call to do_set_data_bittiming providing a stale can_priv::ctrlmode with a CAN_CTRLMODE_FD flag not matching the requested state when switching between a CAN Classic and CAN-FD bitrate.

In the same manner the evaluation of data[IFLA_CAN_CTRLMODE] in function can_validate is also moved in front of the evaluation of data[IFLA_CAN_BITTIMING].

This is a preparation for patches where the nominal and data bittiming may have interdependencies on the driver side depending on the CAN_CTRLMODE_FD flag state.

Signed-off-by: Stefan Mätje stefan.maetje@esd.eu Link: https://patch.msgid.link/20240808164224.213522-1-stefan.maetje@esd.eu Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/dev/netlink.c | 102 +++++++++++++++++----------------- 1 file changed, 51 insertions(+), 51 deletions(-)

diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c index dfdc039d92a6c..01aacdcda2606 100644 --- a/drivers/net/can/dev/netlink.c +++ b/drivers/net/can/dev/netlink.c @@ -65,15 +65,6 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[], if (!data) return 0;

- if (data[IFLA_CAN_BITTIMING]) { - struct can_bittiming bt; - - memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); - err = can_validate_bittiming(&bt, extack); - if (err) - return err; - } - if (data[IFLA_CAN_CTRLMODE]) { struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]); u32 tdc_flags = cm->flags & CAN_CTRLMODE_TDC_MASK; @@ -114,6 +105,15 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[], } }

+ if (data[IFLA_CAN_BITTIMING]) { + struct can_bittiming bt; + + memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); + err = can_validate_bittiming(&bt, extack); + if (err) + return err; + } + if (is_can_fd) { if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING]) return -EOPNOTSUPP; @@ -195,48 +195,6 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], /* We need synchronization with dev->stop() */ ASSERT_RTNL();

- if (data[IFLA_CAN_BITTIMING]) { - struct can_bittiming bt; - - /* Do not allow changing bittiming while running */ - if (dev->flags & IFF_UP) - return -EBUSY; - - /* Calculate bittiming parameters based on - * bittiming_const if set, otherwise pass bitrate - * directly via do_set_bitrate(). Bail out if neither - * is given. - */ - if (!priv->bittiming_const && !priv->do_set_bittiming && - !priv->bitrate_const) - return -EOPNOTSUPP; - - memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); - err = can_get_bittiming(dev, &bt, - priv->bittiming_const, - priv->bitrate_const, - priv->bitrate_const_cnt, - extack); - if (err) - return err; - - if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) { - NL_SET_ERR_MSG_FMT(extack, - "arbitration bitrate %u bps surpasses transceiver capabilities of %u bps", - bt.bitrate, priv->bitrate_max); - return -EINVAL; - } - - memcpy(&priv->bittiming, &bt, sizeof(bt)); - - if (priv->do_set_bittiming) { - /* Finally, set the bit-timing registers */ - err = priv->do_set_bittiming(dev); - if (err) - return err; - } - } - if (data[IFLA_CAN_CTRLMODE]) { struct can_ctrlmode *cm; u32 ctrlstatic; @@ -284,6 +242,48 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[], priv->ctrlmode &= cm->flags | ~CAN_CTRLMODE_TDC_MASK; }

+ if (data[IFLA_CAN_BITTIMING]) { + struct can_bittiming bt; + + /* Do not allow changing bittiming while running */ + if (dev->flags & IFF_UP) + return -EBUSY; + + /* Calculate bittiming parameters based on + * bittiming_const if set, otherwise pass bitrate + * directly via do_set_bitrate(). Bail out if neither + * is given. + */ + if (!priv->bittiming_const && !priv->do_set_bittiming && + !priv->bitrate_const) + return -EOPNOTSUPP; + + memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt)); + err = can_get_bittiming(dev, &bt, + priv->bittiming_const, + priv->bitrate_const, + priv->bitrate_const_cnt, + extack); + if (err) + return err; + + if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) { + NL_SET_ERR_MSG_FMT(extack, + "arbitration bitrate %u bps surpasses transceiver capabilities of %u bps", + bt.bitrate, priv->bitrate_max); + return -EINVAL; + } + + memcpy(&priv->bittiming, &bt, sizeof(bt)); + + if (priv->do_set_bittiming) { + /* Finally, set the bit-timing registers */ + err = priv->do_set_bittiming(dev); + if (err) + return err; + } + } + if (data[IFLA_CAN_RESTART_MS]) { /* Do not allow changing restart delay while running */ if (dev->flags & IFF_UP)

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Dobriyan adobriyan@gmail.com

[ Upstream commit 697ba0b6ec4ae04afb67d3911799b5e2043b4455 ]

I independently rediscovered

commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155 block: fix overflow in blk_ioctl_discard()

but for secure erase.

Same problem:

uint64_t r[2] = {512, 18446744073709551104ULL}; ioctl(fd, BLKSECDISCARD, r);

will enter near infinite loop inside blkdev_issue_secure_erase():

a.out: attempt to access beyond end of device loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048 bio_check_eod: 3286214 callbacks suppressed

Signed-off-by: Alexey Dobriyan adobriyan@gmail.com Link: https://lore.kernel.org/r/9e64057f-650a-46d1-b9f7-34af391536ef@p183 Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/ioctl.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/block/ioctl.c b/block/ioctl.c index d570e16958961..4515d4679eefd 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -126,7 +126,7 @@ static int blk_ioctl_discard(struct block_device *bdev, blk_mode_t mode, return -EINVAL;

filemap_invalidate_lock(bdev->bd_mapping); - err = truncate_bdev_range(bdev, mode, start, start + len - 1); + err = truncate_bdev_range(bdev, mode, start, end - 1); if (err) goto fail;

@@ -163,7 +163,7 @@ static int blk_ioctl_discard(struct block_device *bdev, blk_mode_t mode, static int blk_ioctl_secure_erase(struct block_device *bdev, blk_mode_t mode, void __user *argp) { - uint64_t start, len; + uint64_t start, len, end; uint64_t range[2]; int err;

@@ -178,11 +178,12 @@ static int blk_ioctl_secure_erase(struct block_device *bdev, blk_mode_t mode, len = range[1]; if ((start & 511) || (len & 511)) return -EINVAL; - if (start + len > bdev_nr_bytes(bdev)) + if (check_add_overflow(start, len, &end) || + end > bdev_nr_bytes(bdev)) return -EINVAL;

filemap_invalidate_lock(bdev->bd_mapping); - err = truncate_bdev_range(bdev, mode, start, start + len - 1); + err = truncate_bdev_range(bdev, mode, start, end - 1); if (!err) err = blkdev_issue_secure_erase(bdev, start >> 9, len >> 9, GFP_KERNEL);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Niklas Söderlund niklas.soderlund+renesas@ragnatech.se

[ Upstream commit 569bf6d481b0b823c3c9c3b8be77908fd7caf66b ]

When reading registers from the PHY using the SIOCGMIIREG IOCTL any errors returned from either mdiobus_read() or mdiobus_c45_read() are ignored, and parts of the returned error is passed as the register value back to user-space.

For example, if mdiobus_c45_read() is used with a bus that do not implement the read_c45() callback -EOPNOTSUPP is returned. This is however directly stored in mii_data->val_out and returned as the registers content. As val_out is a u16 the error code is truncated and returned as a plausible register value.

Fix this by first checking the return value for errors before returning it as the register content.

Before this patch,

# phytool read eth0/0:1/0 0xffa1

After this change,

$ phytool read eth0/0:1/0 error: phy_read (-95)

Signed-off-by: Niklas Söderlund niklas.soderlund+renesas@ragnatech.se Reviewed-by: Florian Fainelli florian.fainelli@broadcom.com Reviewed-by: Andrew Lunn andrew@lunn.ch Reviewed-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Tested-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://patch.msgid.link/20240903171536.628930-1-niklas.soderlund+renesas@ra... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/phy.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c4236564c1cd0..8495b111a524a 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -342,14 +342,19 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) if (mdio_phy_id_is_c45(mii_data->phy_id)) { prtad = mdio_phy_id_prtad(mii_data->phy_id); devad = mdio_phy_id_devad(mii_data->phy_id); - mii_data->val_out = mdiobus_c45_read( - phydev->mdio.bus, prtad, devad, - mii_data->reg_num); + ret = mdiobus_c45_read(phydev->mdio.bus, prtad, devad, + mii_data->reg_num); + } else { - mii_data->val_out = mdiobus_read( - phydev->mdio.bus, mii_data->phy_id, - mii_data->reg_num); + ret = mdiobus_read(phydev->mdio.bus, mii_data->phy_id, + mii_data->reg_num); } + + if (ret < 0) + return ret; + + mii_data->val_out = ret; + return 0;

case SIOCSMIIREG:

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Sneddon daniel.sneddon@linux.intel.com

[ Upstream commit 23e12b54acf621f4f03381dca91cc5f1334f21fd ]

The Moorefield and Lightning Mountain Atom processors are missing the NO_SSB flag in the vulnerabilities whitelist. This will cause unaffected parts to incorrectly be reported as vulnerable. Add the missing flag.

These parts are currently out of service and were verified internally with archived documentation that they need the NO_SSB flag.

Closes: https://lore.kernel.org/lkml/CAEJ9NQdhh+4GxrtG1DuYgqYhvc0hi-sKZh-2niukJ-MyFL... Reported-by: Shanavas.K.S shanavasks@gmail.com Signed-off-by: Daniel Sneddon daniel.sneddon@linux.intel.com Signed-off-by: Borislav Petkov (AMD) bp@alien8.de Link: https://lore.kernel.org/r/20240829192437.4074196-1-daniel.sneddon@linux.inte... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/cpu/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index d4e539d4e158c..be307c9ef263d 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1165,8 +1165,8 @@ static const __initconst struct x86_cpu_id cpu_vuln_whitelist[] = {

VULNWL_INTEL(INTEL_CORE_YONAH, NO_SSB),

- VULNWL_INTEL(INTEL_ATOM_AIRMONT_MID, NO_L1TF | MSBDS_ONLY | NO_SWAPGS | NO_ITLB_MULTIHIT), - VULNWL_INTEL(INTEL_ATOM_AIRMONT_NP, NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT), + VULNWL_INTEL(INTEL_ATOM_AIRMONT_MID, NO_SSB | NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT | MSBDS_ONLY), + VULNWL_INTEL(INTEL_ATOM_AIRMONT_NP, NO_SSB | NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT),

VULNWL_INTEL(INTEL_ATOM_GOLDMONT, NO_MDS | NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT | NO_MMIO), VULNWL_INTEL(INTEL_ATOM_GOLDMONT_D, NO_MDS | NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT | NO_MMIO),

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Joe Damato jdamato@fastly.com

[ Upstream commit 08062af0a52107a243f7608fd972edb54ca5b7f8 ]

In commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature") napi_defer_irqs was added to net_device and napi_defer_irqs_count was added to napi_struct, both as type int.

This value never goes below zero, so there is not reason for it to be a signed int. Change the type for both from int to u32, and add an overflow check to sysfs to limit the value to S32_MAX.

The limit of S32_MAX was chosen because the practical limit before this patch was S32_MAX (anything larger was an overflow) and thus there are no behavioral changes introduced. If the extra bit is needed in the future, the limit can be raised.

Before this patch:

$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' $ cat /sys/class/net/eth4/napi_defer_hard_irqs -2147483647

After this patch:

$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' bash: line 0: echo: write error: Numerical result out of range

Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:

include/linux/netdevice.h: unsigned int tx_queue_len;

And has an overflow check:

dev_change_tx_queue_len(..., unsigned long new_len):

if (new_len != (unsigned int)new_len) return -ERANGE;

Suggested-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Joe Damato jdamato@fastly.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/networking/net_cachelines/net_device.rst | 2 +- include/linux/netdevice.h | 4 ++-- net/core/net-sysfs.c | 6 +++++- 3 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/networking/net_cachelines/net_device.rst b/Documentation/networking/net_cachelines/net_device.rst index 70c4fb9d4e5ce..d68f37f5b1f82 100644 --- a/Documentation/networking/net_cachelines/net_device.rst +++ b/Documentation/networking/net_cachelines/net_device.rst @@ -98,7 +98,7 @@ unsigned_int num_rx_queues unsigned_int real_num_rx_queues - read_mostly get_rps_cpu struct_bpf_prog* xdp_prog - read_mostly netif_elide_gro() unsigned_long gro_flush_timeout - read_mostly napi_complete_done -int napi_defer_hard_irqs - read_mostly napi_complete_done +u32 napi_defer_hard_irqs - read_mostly napi_complete_done unsigned_int gro_max_size - read_mostly skb_gro_receive unsigned_int gro_ipv4_max_size - read_mostly skb_gro_receive rx_handler_func_t* rx_handler read_mostly - __netif_receive_skb_core diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 238aaed5d7236..bf3eba0d9bdca 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -354,7 +354,7 @@ struct napi_struct {

unsigned long state; int weight; - int defer_hard_irqs_count; + u32 defer_hard_irqs_count; unsigned long gro_bitmask; int (*poll)(struct napi_struct *, int); #ifdef CONFIG_NETPOLL @@ -2089,7 +2089,7 @@ struct net_device { unsigned int real_num_rx_queues; struct netdev_rx_queue *_rx; unsigned long gro_flush_timeout; - int napi_defer_hard_irqs; + u32 napi_defer_hard_irqs; unsigned int gro_max_size; unsigned int gro_ipv4_max_size; rx_handler_func_t __rcu *rx_handler; diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 15ad775ddd3c1..dc0c622d453e1 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -32,6 +32,7 @@ #ifdef CONFIG_SYSFS static const char fmt_hex[] = "%#x\n"; static const char fmt_dec[] = "%d\n"; +static const char fmt_uint[] = "%u\n"; static const char fmt_ulong[] = "%lu\n"; static const char fmt_u64[] = "%llu\n";

@@ -425,6 +426,9 @@ NETDEVICE_SHOW_RW(gro_flush_timeout, fmt_ulong);

static int change_napi_defer_hard_irqs(struct net_device *dev, unsigned long val) { + if (val > S32_MAX) + return -ERANGE; + WRITE_ONCE(dev->napi_defer_hard_irqs, val); return 0; } @@ -438,7 +442,7 @@ static ssize_t napi_defer_hard_irqs_store(struct device *dev,

return netdev_store(dev, attr, buf, len, change_napi_defer_hard_irqs); } -NETDEVICE_SHOW_RW(napi_defer_hard_irqs, fmt_dec); +NETDEVICE_SHOW_RW(napi_defer_hard_irqs, fmt_uint);

static ssize_t ifalias_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len)

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin Lin benjamin-jw.lin@mediatek.com

[ Upstream commit f2cc859149240d910fdc6405717673e0b84bfda8 ]

Currently, CONNAC2 series do not support encryption for fragmented Tx frames. Therefore, add dummy function mt7915_set_frag_threshold() to prevent SW IEEE 802.11 fragmentation.

Signed-off-by: Benjamin Lin benjamin-jw.lin@mediatek.com Link: https://patch.msgid.link/20240827093011.18621-16-nbd@nbd.name Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7915/init.c | 1 + drivers/net/wireless/mediatek/mt76/mt7915/main.c | 7 +++++++ 2 files changed, 8 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c index 7bc3b4cd35925..6bef96e3d2a3d 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c @@ -400,6 +400,7 @@ mt7915_init_wiphy(struct mt7915_phy *phy) ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD); ieee80211_hw_set(hw, SUPPORTS_MULTI_BSSID); ieee80211_hw_set(hw, WANT_MONITOR_VIF); + ieee80211_hw_set(hw, SUPPORTS_TX_FRAG);

hw->max_tx_fragments = 4;

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c index eea41b29f0967..3b2dcb410e0f0 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c @@ -1577,6 +1577,12 @@ mt7915_twt_teardown_request(struct ieee80211_hw *hw, mutex_unlock(&dev->mt76.mutex); }

+static int +mt7915_set_frag_threshold(struct ieee80211_hw *hw, u32 val) +{ + return 0; +} + static int mt7915_set_radar_background(struct ieee80211_hw *hw, struct cfg80211_chan_def *chandef) @@ -1707,6 +1713,7 @@ const struct ieee80211_ops mt7915_ops = { .sta_set_decap_offload = mt7915_sta_set_decap_offload, .add_twt_setup = mt7915_mac_add_twt_setup, .twt_teardown_request = mt7915_twt_teardown_request, + .set_frag_threshold = mt7915_set_frag_threshold, CFG80211_TESTMODE_CMD(mt76_testmode_cmd) CFG80211_TESTMODE_DUMP(mt76_testmode_dump) #ifdef CONFIG_MAC80211_DEBUGFS

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva gustavoars@kernel.org

[ Upstream commit 498365e52bebcbc36a93279fe7e9d6aec8479cee ]

Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`.

With this, fix the following warning:

elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]

Reported-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Closes: https://lore.kernel.org/linux-hardening/ZsZNgfnEwOcPdCly@black.fi.intel.com/ Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Acked-by: Brian Norris briannorris@chromium.org Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/marvell/mwifiex/fw.h | 2 +- drivers/net/wireless/marvell/mwifiex/scan.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h index 3adc447b715f6..5b072120e3f21 100644 --- a/drivers/net/wireless/marvell/mwifiex/fw.h +++ b/drivers/net/wireless/marvell/mwifiex/fw.h @@ -1587,7 +1587,7 @@ struct host_cmd_ds_802_11_scan_rsp {

struct host_cmd_ds_802_11_scan_ext { u32 reserved; - u8 tlv_buffer[1]; + u8 tlv_buffer[]; } __packed;

struct mwifiex_ie_types_bss_mode { diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c index 0326b121747cb..17ce84f5207e3 100644 --- a/drivers/net/wireless/marvell/mwifiex/scan.c +++ b/drivers/net/wireless/marvell/mwifiex/scan.c @@ -2530,8 +2530,7 @@ int mwifiex_ret_802_11_scan_ext(struct mwifiex_private *priv, ext_scan_resp = &resp->params.ext_scan;

tlv = (void *)ext_scan_resp->tlv_buffer; - buf_left = le16_to_cpu(resp->size) - (sizeof(*ext_scan_resp) + S_DS_GEN - - 1); + buf_left = le16_to_cpu(resp->size) - (sizeof(*ext_scan_resp) + S_DS_GEN);

while (buf_left >= sizeof(struct mwifiex_ie_types_header)) { type = le16_to_cpu(tlv->type);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan ruanjinjie@huawei.com

[ Upstream commit daaba19d357f0900b303a530ced96c78086267ea ]

disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ.

Reviewed-by: Louis Peens louis.peens@corigine.com Signed-off-by: Jinjie Ruan ruanjinjie@huawei.com Link: https://patch.msgid.link/20240911094445.1922476-4-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 182ba0a8b095b..6e0929af0f725 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -821,14 +821,13 @@ nfp_net_prepare_vector(struct nfp_net *nn, struct nfp_net_r_vector *r_vec,

snprintf(r_vec->name, sizeof(r_vec->name), "%s-rxtx-%d", nfp_net_name(nn), idx); - err = request_irq(r_vec->irq_vector, r_vec->handler, 0, r_vec->name, - r_vec); + err = request_irq(r_vec->irq_vector, r_vec->handler, IRQF_NO_AUTOEN, + r_vec->name, r_vec); if (err) { nfp_net_napi_del(&nn->dp, r_vec); nn_err(nn, "Error requesting IRQ %d\n", r_vec->irq_vector); return err; } - disable_irq(r_vec->irq_vector);

irq_set_affinity_hint(r_vec->irq_vector, &r_vec->affinity_mask);

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner tglx@linutronix.de

[ Upstream commit 830802a0fea8fb39d3dc9fb7d6b5581e1343eb1f ]

Breno observed panics when using failslab under certain conditions during runtime:

can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed

panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480

That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed.

The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode.

Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully.

Reported-by: Breno Leitao leitao@debian.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Breno Leitao leitao@debian.org Tested-by: Qiuxu Zhuo qiuxu.zhuo@intel.com Link: https://lore.kernel.org/all/ZqfJmUF8sXIyuSHN@gmail.com Link: https://lore.kernel.org/all/20240802155440.275200843@linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/apic/io_apic.c | 46 ++++++++++++++++------------------ 1 file changed, 22 insertions(+), 24 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 477b740b2f267..d1ec1dcb637af 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -352,27 +352,26 @@ static void ioapic_mask_entry(int apic, int pin) * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ -static int __add_pin_to_irq_node(struct mp_chip_data *data, - int node, int apic, int pin) +static bool add_pin_to_irq_node(struct mp_chip_data *data, int node, int apic, int pin) { struct irq_pin_list *entry;

- /* don't allow duplicates */ - for_each_irq_pin(entry, data->irq_2_pin) + /* Don't allow duplicates */ + for_each_irq_pin(entry, data->irq_2_pin) { if (entry->apic == apic && entry->pin == pin) - return 0; + return true; + }

entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node); if (!entry) { - pr_err("can not alloc irq_pin_list (%d,%d,%d)\n", - node, apic, pin); - return -ENOMEM; + pr_err("Cannot allocate irq_pin_list (%d,%d,%d)\n", node, apic, pin); + return false; } + entry->apic = apic; entry->pin = pin; list_add_tail(&entry->list, &data->irq_2_pin); - - return 0; + return true; }

static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin) @@ -387,13 +386,6 @@ static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin) } }

-static void add_pin_to_irq_node(struct mp_chip_data *data, - int node, int apic, int pin) -{ - if (__add_pin_to_irq_node(data, node, apic, pin)) - panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); -} - /* * Reroute an IRQ to a different pin. */ @@ -1002,8 +994,7 @@ static int alloc_isa_irq_from_domain(struct irq_domain *domain, if (irq_data && irq_data->parent_data) { if (!mp_check_pin_attr(irq, info)) return -EBUSY; - if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic, - info->ioapic.pin)) + if (!add_pin_to_irq_node(irq_data->chip_data, node, ioapic, info->ioapic.pin)) return -ENOMEM; } else { info->flags |= X86_IRQ_ALLOC_LEGACY; @@ -3017,10 +3008,8 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, return -ENOMEM;

ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info); - if (ret < 0) { - kfree(data); - return ret; - } + if (ret < 0) + goto free_data;

INIT_LIST_HEAD(&data->irq_2_pin); irq_data->hwirq = info->ioapic.pin; @@ -3029,7 +3018,10 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, irq_data->chip_data = data; mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info);

- add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin); + if (!add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin)) { + ret = -ENOMEM; + goto free_irqs; + }

mp_preconfigure_entry(data); mp_register_handler(virq, data->is_level); @@ -3044,6 +3036,12 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, ioapic, mpc_ioapic_id(ioapic), pin, virq, data->is_level, data->active_low); return 0; + +free_irqs: + irq_domain_free_irqs_parent(domain, virq, nr_irqs); +free_data: + kfree(data); + return ret; }

void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,

6.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Karol Kosik k.kosik@outlook.com

[ Upstream commit 6aa8700150f7dc62f60b4cf5b1624e2e3d9ed78e ]

Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'. The problem stems from the driver not being able to find input/output terminals required to configure audio streaming. The information about those terminals is stored in AudioControl Interface. Numark device contains 2 AudioControl Interfaces and the driver checks only one of them.

According to the USB standard, a device can have multiple audio functions, each represented by Audio Interface Collection. Every audio function is considered to be closed box and will contain unique AudioControl Interface and zero or more AudioStreaming and MIDIStreaming Interfaces.

The Numark device adheres to the standard and defines two audio functions: - MIDIStreaming function - AudioStreaming function It starts with MIDI function, followed by the audio function. The driver saves the first AudioControl Interface in `snd_usb_audio` structure associated with the entire device. It then attempts to use this interface to query for terminals and clocks. However, this fails because the correct information is stored in the second AudioControl Interface, defined in the second Audio Interface Collection.

This patch introduces a structure holding association between each MIDI/Audio Interface and its corresponding AudioControl Interface, instead of relying on AudioControl Interface defined for the entire device. This structure is populated during usb probing phase and leveraged later when querying for terminals and when sending USB requests.

Alternative solutions considered include: - defining a quirk for Numark where the order of interface is manually changed, or terminals are hardcoded in the driver. This solution would have fixed only this model, though it seems that device is USB compliant, and it also seems that other devices from this company may be affected. What's more, it looks like products from other manufacturers have similar problems, i.e. Rane One DJ console - keeping a list of all AudioControl Interfaces and querying all of them to find required information. That would have solved my problem and have low probability of breaking other devices, as we would always start with the same logic of querying first AudioControl Interface. This solution would not have followed the standard though.

This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds the first AudioControl Interface, and uses it as a fallback when some interfaces are not parsed correctly and lack an associated AudioControl Interface, i.e., when configured via quirks.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865 Signed-off-by: Karol Kosik k.kosik@outlook.com Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB128... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/card.c | 2 ++ sound/usb/clock.c | 62 ++++++++++++++++++++++++-------------- sound/usb/format.c | 6 ++-- sound/usb/helper.c | 34 +++++++++++++++++++++ sound/usb/helper.h | 10 ++++-- sound/usb/mixer.c | 2 +- sound/usb/mixer_quirks.c | 17 ++++++----- sound/usb/mixer_scarlett.c | 4 +-- sound/usb/power.c | 3 +- sound/usb/power.h | 1 + sound/usb/stream.c | 21 ++++++++----- sound/usb/usbaudio.h | 12 ++++++++ 12 files changed, 127 insertions(+), 47 deletions(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c index bdb04fa37a71d..778de9244f1e7 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -206,6 +206,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int return -EINVAL; }

+ snd_usb_add_ctrl_interface_link(chip, interface, ctrlif); + if (! snd_usb_parse_audio_interface(chip, interface)) { usb_set_interface(dev, interface, 0); /* reset the current interface */ return usb_driver_claim_interface(&usb_audio_driver, iface, diff --git a/sound/usb/clock.c b/sound/usb/clock.c index 60fcb872a80b6..8f85200292f3f 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -76,11 +76,14 @@ static bool validate_clock_multiplier(void *p, int id, int proto) }

#define DEFINE_FIND_HELPER(name, obj, validator, type2, type3) \ -static obj *name(struct snd_usb_audio *chip, int id, int proto) \ +static obj *name(struct snd_usb_audio *chip, int id, \ + const struct audioformat *fmt) \ { \ - return find_uac_clock_desc(chip->ctrl_intf, id, validator, \ - proto == UAC_VERSION_3 ? (type3) : (type2), \ - proto); \ + struct usb_host_interface *ctrl_intf = \ + snd_usb_find_ctrl_interface(chip, fmt->iface); \ + return find_uac_clock_desc(ctrl_intf, id, validator, \ + fmt->protocol == UAC_VERSION_3 ? (type3) : (type2), \ + fmt->protocol); \ }

DEFINE_FIND_HELPER(snd_usb_find_clock_source, @@ -93,16 +96,19 @@ DEFINE_FIND_HELPER(snd_usb_find_clock_multiplier, union uac23_clock_multiplier_desc, validate_clock_multiplier, UAC2_CLOCK_MULTIPLIER, UAC3_CLOCK_MULTIPLIER);

-static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id) +static int uac_clock_selector_get_val(struct snd_usb_audio *chip, + int selector_id, int iface_no) { + struct usb_host_interface *ctrl_intf; unsigned char buf; int ret;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no); ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC2_CS_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, UAC2_CX_CLOCK_SELECTOR << 8, - snd_usb_ctrl_intf(chip) | (selector_id << 8), + snd_usb_ctrl_intf(ctrl_intf) | (selector_id << 8), &buf, sizeof(buf));

if (ret < 0) @@ -111,16 +117,18 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i return buf; }

-static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_id, - unsigned char pin) +static int uac_clock_selector_set_val(struct snd_usb_audio *chip, + int selector_id, unsigned char pin, int iface_no) { + struct usb_host_interface *ctrl_intf; int ret;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no); ret = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC2_CS_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, UAC2_CX_CLOCK_SELECTOR << 8, - snd_usb_ctrl_intf(chip) | (selector_id << 8), + snd_usb_ctrl_intf(ctrl_intf) | (selector_id << 8), &pin, sizeof(pin)); if (ret < 0) return ret; @@ -132,7 +140,7 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i return -EINVAL; }

- ret = uac_clock_selector_get_val(chip, selector_id); + ret = uac_clock_selector_get_val(chip, selector_id, iface_no); if (ret < 0) return ret;

@@ -155,8 +163,10 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, unsigned char data; struct usb_device *dev = chip->dev; union uac23_clock_source_desc *cs_desc; + struct usb_host_interface *ctrl_intf;

- cs_desc = snd_usb_find_clock_source(chip, source_id, fmt->protocol); + ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface); + cs_desc = snd_usb_find_clock_source(chip, source_id, fmt); if (!cs_desc) return false;

@@ -191,7 +201,7 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_CLOCK_VALID << 8, - snd_usb_ctrl_intf(chip) | (source_id << 8), + snd_usb_ctrl_intf(ctrl_intf) | (source_id << 8), &data, sizeof(data)); if (err < 0) { dev_warn(&dev->dev, @@ -217,8 +227,10 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, struct usb_device *dev = chip->dev; u32 bmControls; union uac23_clock_source_desc *cs_desc; + struct usb_host_interface *ctrl_intf;

- cs_desc = snd_usb_find_clock_source(chip, source_id, fmt->protocol); + ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface); + cs_desc = snd_usb_find_clock_source(chip, source_id, fmt); if (!cs_desc) return false;

@@ -235,7 +247,7 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_CLOCK_VALID << 8, - snd_usb_ctrl_intf(chip) | (source_id << 8), + snd_usb_ctrl_intf(ctrl_intf) | (source_id << 8), &data, sizeof(data));

if (err < 0) { @@ -274,7 +286,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, }

/* first, see if the ID we're looking at is a clock source already */ - source = snd_usb_find_clock_source(chip, entity_id, proto); + source = snd_usb_find_clock_source(chip, entity_id, fmt); if (source) { entity_id = GET_VAL(source, proto, bClockID); if (validate && !uac_clock_source_is_valid(chip, fmt, @@ -287,7 +299,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, return entity_id; }

- selector = snd_usb_find_clock_selector(chip, entity_id, proto); + selector = snd_usb_find_clock_selector(chip, entity_id, fmt); if (selector) { pins = GET_VAL(selector, proto, bNrInPins); clock_id = GET_VAL(selector, proto, bClockID); @@ -317,7 +329,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,

/* the entity ID we are looking at is a selector. * find out what it currently selects */ - ret = uac_clock_selector_get_val(chip, clock_id); + ret = uac_clock_selector_get_val(chip, clock_id, fmt->iface); if (ret < 0) { if (!chip->autoclock) return ret; @@ -346,7 +358,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, if (chip->quirk_flags & QUIRK_FLAG_SKIP_CLOCK_SELECTOR || !writeable) return ret; - err = uac_clock_selector_set_val(chip, entity_id, cur); + err = uac_clock_selector_set_val(chip, entity_id, cur, fmt->iface); if (err < 0) { if (pins == 1) { usb_audio_dbg(chip, @@ -377,7 +389,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, if (ret < 0) continue;

- err = uac_clock_selector_set_val(chip, entity_id, i); + err = uac_clock_selector_set_val(chip, entity_id, i, fmt->iface); if (err < 0) continue;

@@ -391,7 +403,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, }

/* FIXME: multipliers only act as pass-thru element for now */ - multiplier = snd_usb_find_clock_multiplier(chip, entity_id, proto); + multiplier = snd_usb_find_clock_multiplier(chip, entity_id, fmt); if (multiplier) return __uac_clock_find_source(chip, fmt, GET_VAL(multiplier, proto, bCSourceID), @@ -491,11 +503,13 @@ static int get_sample_rate_v2v3(struct snd_usb_audio *chip, int iface, struct usb_device *dev = chip->dev; __le32 data; int err; + struct usb_host_interface *ctrl_intf;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, iface); err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), + snd_usb_ctrl_intf(ctrl_intf) | (clock << 8), &data, sizeof(data)); if (err < 0) { dev_warn(&dev->dev, "%d:%d: cannot get freq (v2/v3): err %d\n", @@ -524,8 +538,10 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip, __le32 data; int err; union uac23_clock_source_desc *cs_desc; + struct usb_host_interface *ctrl_intf;

- cs_desc = snd_usb_find_clock_source(chip, clock, fmt->protocol); + ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface); + cs_desc = snd_usb_find_clock_source(chip, clock, fmt);

if (!cs_desc) return 0; @@ -544,7 +560,7 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip, err = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC2_CS_CUR, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), + snd_usb_ctrl_intf(ctrl_intf) | (clock << 8), &data, sizeof(data)); if (err < 0) return err; diff --git a/sound/usb/format.c b/sound/usb/format.c index 3b45d0ee76938..61c4aca8be09e 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -548,7 +548,9 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip, unsigned char tmp[2], *data; int nr_triplets, data_size, ret = 0, ret_l6; int clock = snd_usb_clock_find_source(chip, fp, false); + struct usb_host_interface *ctrl_intf;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, fp->iface); if (clock < 0) { dev_err(&dev->dev, "%s(): unable to find clock source (clock %d)\n", @@ -560,7 +562,7 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip, ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), + snd_usb_ctrl_intf(ctrl_intf) | (clock << 8), tmp, sizeof(tmp));

if (ret < 0) { @@ -595,7 +597,7 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip, ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_SAM_FREQ << 8, - snd_usb_ctrl_intf(chip) | (clock << 8), + snd_usb_ctrl_intf(ctrl_intf) | (clock << 8), data, data_size);

if (ret < 0) { diff --git a/sound/usb/helper.c b/sound/usb/helper.c index bf80e55d013a8..72b671fb2c84c 100644 --- a/sound/usb/helper.c +++ b/sound/usb/helper.c @@ -130,3 +130,37 @@ snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting return NULL; return usb_altnum_to_altsetting(iface, altsetting); } + +int snd_usb_add_ctrl_interface_link(struct snd_usb_audio *chip, int ifnum, + int ctrlif) +{ + struct usb_device *dev = chip->dev; + struct usb_host_interface *host_iface; + + if (chip->num_intf_to_ctrl >= MAX_CARD_INTERFACES) { + dev_info(&dev->dev, "Too many interfaces assigned to the single USB-audio card\n"); + return -EINVAL; + } + + /* find audiocontrol interface */ + host_iface = &usb_ifnum_to_if(dev, ctrlif)->altsetting[0]; + + chip->intf_to_ctrl[chip->num_intf_to_ctrl].interface = ifnum; + chip->intf_to_ctrl[chip->num_intf_to_ctrl].ctrl_intf = host_iface; + chip->num_intf_to_ctrl++; + + return 0; +} + +struct usb_host_interface *snd_usb_find_ctrl_interface(struct snd_usb_audio *chip, + int ifnum) +{ + int i; + + for (i = 0; i < chip->num_intf_to_ctrl; ++i) + if (chip->intf_to_ctrl[i].interface == ifnum) + return chip->intf_to_ctrl[i].ctrl_intf; + + /* Fallback to first audiocontrol interface */ + return chip->ctrl_intf; +} diff --git a/sound/usb/helper.h b/sound/usb/helper.h index e2b51ec96ec62..0372e050b3dc4 100644 --- a/sound/usb/helper.h +++ b/sound/usb/helper.h @@ -17,6 +17,12 @@ unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip, struct usb_host_interface * snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting);

+int snd_usb_add_ctrl_interface_link(struct snd_usb_audio *chip, int ifnum, + int ctrlif); + +struct usb_host_interface *snd_usb_find_ctrl_interface(struct snd_usb_audio *chip, + int ifnum); + /* * retrieve usb_interface descriptor from the host interface * (conditional for compatibility with the older API) @@ -28,9 +34,9 @@ snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting

#define snd_usb_get_speed(dev) ((dev)->speed)

-static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip) +static inline int snd_usb_ctrl_intf(struct usb_host_interface *ctrl_intf) { - return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber; + return get_iface_desc(ctrl_intf)->bInterfaceNumber; }

/* in validate.c */ diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 197fd07e69edd..017b50322d88f 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -728,7 +728,7 @@ static int get_cluster_channels_v3(struct mixer_build *state, unsigned int clust UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, cluster_id, - snd_usb_ctrl_intf(state->chip), + snd_usb_ctrl_intf(state->mixer->hostif), &c_header, sizeof(c_header)); if (err < 0) goto error; diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 212b5e6443d88..1d8bf1ecfed44 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -1043,7 +1043,7 @@ static int snd_ftu_eff_switch_init(struct usb_mixer_interface *mixer, err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, pval & 0xff00, - snd_usb_ctrl_intf(mixer->chip) | ((pval & 0xff) << 8), + snd_usb_ctrl_intf(mixer->hostif) | ((pval & 0xff) << 8), value, 2); if (err < 0) return err; @@ -1077,7 +1077,7 @@ static int snd_ftu_eff_switch_update(struct usb_mixer_elem_list *list) UAC_SET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, pval & 0xff00, - snd_usb_ctrl_intf(chip) | ((pval & 0xff) << 8), + snd_usb_ctrl_intf(list->mixer->hostif) | ((pval & 0xff) << 8), value, 2); snd_usb_unlock_shutdown(chip); return err; @@ -2115,24 +2115,25 @@ static int dell_dock_mixer_create(struct usb_mixer_interface *mixer) return 0; }

-static void dell_dock_init_vol(struct snd_usb_audio *chip, int ch, int id) +static void dell_dock_init_vol(struct usb_mixer_interface *mixer, int ch, int id) { + struct snd_usb_audio *chip = mixer->chip; u16 buf = 0;

snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, (UAC_FU_VOLUME << 8) | ch, - snd_usb_ctrl_intf(chip) | (id << 8), + snd_usb_ctrl_intf(mixer->hostif) | (id << 8), &buf, 2); }

static int dell_dock_mixer_init(struct usb_mixer_interface *mixer) { /* fix to 0dB playback volumes */ - dell_dock_init_vol(mixer->chip, 1, 16); - dell_dock_init_vol(mixer->chip, 2, 16); - dell_dock_init_vol(mixer->chip, 1, 19); - dell_dock_init_vol(mixer->chip, 2, 19); + dell_dock_init_vol(mixer, 1, 16); + dell_dock_init_vol(mixer, 2, 16); + dell_dock_init_vol(mixer, 1, 19); + dell_dock_init_vol(mixer, 2, 19); return 0; }

diff --git a/sound/usb/mixer_scarlett.c b/sound/usb/mixer_scarlett.c index 0d6e4f15bf77c..ff548041679bb 100644 --- a/sound/usb/mixer_scarlett.c +++ b/sound/usb/mixer_scarlett.c @@ -460,7 +460,7 @@ static int scarlett_ctl_meter_get(struct snd_kcontrol *kctl, struct snd_usb_audio *chip = elem->head.mixer->chip; unsigned char buf[2 * MAX_CHANNELS] = {0, }; int wValue = (elem->control << 8) | elem->idx_off; - int idx = snd_usb_ctrl_intf(chip) | (elem->head.id << 8); + int idx = snd_usb_ctrl_intf(elem->head.mixer->hostif) | (elem->head.id << 8); int err;

err = snd_usb_ctl_msg(chip->dev, @@ -1002,7 +1002,7 @@ int snd_scarlett_controls_create(struct usb_mixer_interface *mixer) err = snd_usb_ctl_msg(mixer->chip->dev, usb_sndctrlpipe(mixer->chip->dev, 0), UAC2_CS_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | - USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->chip) | + USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->hostif) | (0x29 << 8), sample_rate_buffer, 4); if (err < 0) return err; diff --git a/sound/usb/power.c b/sound/usb/power.c index 606a2cb23eab6..66bd4daa68fd5 100644 --- a/sound/usb/power.c +++ b/sound/usb/power.c @@ -40,6 +40,7 @@ snd_usb_find_power_domain(struct usb_host_interface *ctrl_iface, le16_to_cpu(pd_desc->waRecoveryTime1); pd->pd_d2d0_rec = le16_to_cpu(pd_desc->waRecoveryTime2); + pd->ctrl_iface = ctrl_iface; return pd; } } @@ -57,7 +58,7 @@ int snd_usb_power_domain_set(struct snd_usb_audio *chip, unsigned char current_state; int err, idx;

- idx = snd_usb_ctrl_intf(chip) | (pd->pd_id << 8); + idx = snd_usb_ctrl_intf(pd->ctrl_iface) | (pd->pd_id << 8);

err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC2_CS_CUR, diff --git a/sound/usb/power.h b/sound/usb/power.h index 396e3e51440a7..1fa92ad0ca925 100644 --- a/sound/usb/power.h +++ b/sound/usb/power.h @@ -6,6 +6,7 @@ struct snd_usb_power_domain { int pd_id; /* UAC3 Power Domain ID */ int pd_d1d0_rec; /* D1 to D0 recovery time */ int pd_d2d0_rec; /* D2 to D0 recovery time */ + struct usb_host_interface *ctrl_iface; /* Control interface */ };

enum { diff --git a/sound/usb/stream.c b/sound/usb/stream.c index e14c725acebf2..d70c140813d68 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -713,10 +713,13 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip, struct usb_device *dev = chip->dev; struct uac_format_type_i_continuous_descriptor *fmt; unsigned int num_channels = 0, chconfig = 0; + struct usb_host_interface *ctrl_intf; struct audioformat *fp; int clock = 0; u64 format;

+ ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no); + /* get audio formats */ if (protocol == UAC_VERSION_1) { struct uac1_as_header_descriptor *as = @@ -740,7 +743,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip,

format = le16_to_cpu(as->wFormatTag); /* remember the format value */

- iterm = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, + iterm = snd_usb_find_input_terminal_descriptor(ctrl_intf, as->bTerminalLink, protocol); if (iterm) { @@ -776,7 +779,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip, * lookup the terminal associated to this interface * to extract the clock */ - input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, + input_term = snd_usb_find_input_terminal_descriptor(ctrl_intf, as->bTerminalLink, protocol); if (input_term) { @@ -786,7 +789,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip, goto found_clock; }

- output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf, + output_term = snd_usb_find_output_terminal_descriptor(ctrl_intf, as->bTerminalLink, protocol); if (output_term) { @@ -870,6 +873,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, struct uac3_cluster_header_descriptor *cluster; struct uac3_as_header_descriptor *as = NULL; struct uac3_hc_descriptor_header hc_header; + struct usb_host_interface *ctrl_intf; struct snd_pcm_chmap_elem *chmap; struct snd_usb_power_domain *pd; unsigned char badd_profile; @@ -881,6 +885,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, int err;

badd_profile = chip->badd_profile; + ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no);

if (badd_profile >= UAC3_FUNCTION_SUBCLASS_GENERIC_IO) { unsigned int maxpacksize = @@ -966,7 +971,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, cluster_id, - snd_usb_ctrl_intf(chip), + snd_usb_ctrl_intf(ctrl_intf), &hc_header, sizeof(hc_header)); if (err < 0) return ERR_PTR(err); @@ -990,7 +995,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, cluster_id, - snd_usb_ctrl_intf(chip), + snd_usb_ctrl_intf(ctrl_intf), cluster, wLength); if (err < 0) { kfree(cluster); @@ -1011,7 +1016,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, * lookup the terminal associated to this interface * to extract the clock */ - input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, + input_term = snd_usb_find_input_terminal_descriptor(ctrl_intf, as->bTerminalLink, UAC_VERSION_3); if (input_term) { @@ -1019,7 +1024,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, goto found_clock; }

- output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf, + output_term = snd_usb_find_output_terminal_descriptor(ctrl_intf, as->bTerminalLink, UAC_VERSION_3); if (output_term) { @@ -1068,7 +1073,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, UAC_VERSION_3, iface_no);

- pd = snd_usb_find_power_domain(chip->ctrl_intf, + pd = snd_usb_find_power_domain(ctrl_intf, as->bTerminalLink);

/* ok, let's parse further... */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 43d4029edab46..b0f042c996087 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -21,6 +21,15 @@ struct media_intf_devnode;

#define MAX_CARD_INTERFACES 16

+/* + * Structure holding assosiation between Audio Control Interface + * and given Streaming or Midi Interface. + */ +struct snd_intf_to_ctrl { + u8 interface; + struct usb_host_interface *ctrl_intf; +}; + struct snd_usb_audio { int index; struct usb_device *dev; @@ -63,6 +72,9 @@ struct snd_usb_audio { struct usb_host_interface *ctrl_intf; /* the audio control interface */ struct media_device *media_dev; struct media_intf_devnode *ctl_intf_media_devnode; + + unsigned int num_intf_to_ctrl; + struct snd_intf_to_ctrl intf_to_ctrl[MAX_CARD_INTERFACES]; };

#define USB_AUDIO_IFACE_UNUSED ((void *)-1L)