[PATCH AUTOSEL 5.10 01/23] spi: rockchip: handle zero length transfers without timing out
From: Tobias Schramm t.schramm@manjaro.org
[ Upstream commit 5457773ef99f25fcc4b238ac76b68e28273250f4 ]
Previously zero length transfers submitted to the Rokchip SPI driver would time out in the SPI layer. This happens because the SPI peripheral does not trigger a transfer completion interrupt for zero length transfers.
Fix that by completing zero length transfers immediately at start of transfer.
Signed-off-by: Tobias Schramm t.schramm@manjaro.org Link: https://lore.kernel.org/r/20210827050357.165409-1-t.schramm@manjaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-rockchip.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 0aab37cd64e7..624273d0e727 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -582,6 +582,12 @@ static int rockchip_spi_transfer_one( int ret; bool use_dma;
+ /* Zero length transfers won't trigger an interrupt on completion */ + if (!xfer->len) { + spi_finalize_current_transfer(ctlr); + return 1; + } + WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && (readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY));
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 3bf1669b0e033c885ebcb1ddc2334088dd125f2d ]
Add touchscreen info for the Chuwi HiBook (CWI514) tablet. This includes info for getting the firmware directly from the UEFI, so that the user does not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB, without requiring any manual setup.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210905130210.32810-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 37 ++++++++++++++++++++++++++ 1 file changed, 37 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 99260915122c..4f5d53b585db 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -141,6 +141,33 @@ static const struct ts_dmi_data chuwi_hi10_pro_data = { .properties = chuwi_hi10_pro_props, };
+static const struct property_entry chuwi_hibook_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 30), + PROPERTY_ENTRY_U32("touchscreen-min-y", 4), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1892), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1276), + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hibook.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), + { } +}; + +static const struct ts_dmi_data chuwi_hibook_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hibook.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 40392, + .sha256 = { 0xf7, 0xc0, 0xe8, 0x5a, 0x6c, 0xf2, 0xeb, 0x8d, + 0x12, 0xc4, 0x45, 0xbf, 0x55, 0x13, 0x4c, 0x1a, + 0x13, 0x04, 0x31, 0x08, 0x65, 0x73, 0xf7, 0xa8, + 0x1b, 0x7d, 0x59, 0xc9, 0xe6, 0x97, 0xf7, 0x38 }, + }, + .acpi_name = "MSSL0017:00", + .properties = chuwi_hibook_props, +}; + static const struct property_entry chuwi_vi8_props[] = { PROPERTY_ENTRY_U32("touchscreen-min-x", 4), PROPERTY_ENTRY_U32("touchscreen-min-y", 6), @@ -936,6 +963,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), }, }, + { + /* Chuwi HiBook (CWI514) */ + .driver_data = (void *)&chuwi_hibook_data, + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), + /* Above matches are too generic, add bios-date match */ + DMI_MATCH(DMI_BIOS_DATE, "05/07/2016"), + }, + }, { /* Chuwi Vi8 (CWI506) */ .driver_data = (void *)&chuwi_vi8_data,
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 196159d278ae3b49e7bbb7c76822e6008fd89b97 ]
Add info for getting the firmware directly from the UEFI for the Chuwi Hi10 Plus (CWI527), so that the user does not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB, without requiring any manual setup.
Also tweak the min and width/height values a bit for more accurate position reporting.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210905130210.32810-2-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 4f5d53b585db..59b7e90cd587 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -100,10 +100,10 @@ static const struct ts_dmi_data chuwi_hi10_air_data = { };
static const struct property_entry chuwi_hi10_plus_props[] = { - PROPERTY_ENTRY_U32("touchscreen-min-x", 0), - PROPERTY_ENTRY_U32("touchscreen-min-y", 5), - PROPERTY_ENTRY_U32("touchscreen-size-x", 1914), - PROPERTY_ENTRY_U32("touchscreen-size-y", 1283), + PROPERTY_ENTRY_U32("touchscreen-min-x", 12), + PROPERTY_ENTRY_U32("touchscreen-min-y", 10), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1908), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1270), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10plus.fw"), PROPERTY_ENTRY_U32("silead,max-fingers", 10), PROPERTY_ENTRY_BOOL("silead,home-button"), @@ -111,6 +111,15 @@ static const struct property_entry chuwi_hi10_plus_props[] = { };
static const struct ts_dmi_data chuwi_hi10_plus_data = { + .embedded_fw = { + .name = "silead/gsl1680-chuwi-hi10plus.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 34056, + .sha256 = { 0xfd, 0x0a, 0x08, 0x08, 0x3c, 0xa6, 0x34, 0x4e, + 0x2c, 0x49, 0x9c, 0xcd, 0x7d, 0x44, 0x9d, 0x38, + 0x10, 0x68, 0xb5, 0xbd, 0xb7, 0x2a, 0x63, 0xb5, + 0x67, 0x0b, 0x96, 0xbd, 0x89, 0x67, 0x85, 0x09 }, + }, .acpi_name = "MSSL0017:00", .properties = chuwi_hi10_plus_props, };
From: Dai Ngo dai.ngo@oracle.com
[ Upstream commit 02579b2ff8b0becfb51d85a975908ac4ab15fba8 ]
When the back channel enters SEQ4_STATUS_CB_PATH_DOWN state, the client recovers by sending BIND_CONN_TO_SESSION but the server fails to recover the back channel and leaves it as NFSD4_CB_DOWN.
Fix by enhancing nfsd4_bind_conn_to_session to probe the back channel by calling nfsd4_probe_callback.
Signed-off-by: Dai Ngo dai.ngo@oracle.com Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfsd/nfs4state.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 0313390fa4b4..1cdf7e0a5c22 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -3512,7 +3512,7 @@ static struct nfsd4_conn *__nfsd4_find_conn(struct svc_xprt *xpt, struct nfsd4_s }
static __be32 nfsd4_match_existing_connection(struct svc_rqst *rqst, - struct nfsd4_session *session, u32 req) + struct nfsd4_session *session, u32 req, struct nfsd4_conn **conn) { struct nfs4_client *clp = session->se_client; struct svc_xprt *xpt = rqst->rq_xprt; @@ -3535,6 +3535,8 @@ static __be32 nfsd4_match_existing_connection(struct svc_rqst *rqst, else status = nfserr_inval; spin_unlock(&clp->cl_lock); + if (status == nfs_ok && conn) + *conn = c; return status; }
@@ -3559,8 +3561,16 @@ __be32 nfsd4_bind_conn_to_session(struct svc_rqst *rqstp, status = nfserr_wrong_cred; if (!nfsd4_mach_creds_match(session->se_client, rqstp)) goto out; - status = nfsd4_match_existing_connection(rqstp, session, bcts->dir); - if (status == nfs_ok || status == nfserr_inval) + status = nfsd4_match_existing_connection(rqstp, session, + bcts->dir, &conn); + if (status == nfs_ok) { + if (bcts->dir == NFS4_CDFC4_FORE_OR_BOTH || + bcts->dir == NFS4_CDFC4_BACK) + conn->cn_flags |= NFS4_CDFC4_BACK; + nfsd4_probe_callback(session->se_client); + goto out; + } + if (status == nfserr_inval) goto out; status = nfsd4_map_bcts_dir(&bcts->dir); if (status)
From: Qu Wenruo wqu@suse.com
[ Upstream commit bbc9a6eb5eec03dcafee266b19f56295e3b2aa8f ]
There is a BUG_ON() in btrfs_csum_one_bio() to catch code logic error. It has indeed caught several bugs during subpage development. But the BUG_ON() itself will bring down the whole system which is an overkill.
Replace it with a WARN() and exit gracefully, so that it won't crash the whole system while we can still catch the code logic error.
Signed-off-by: Qu Wenruo wqu@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/file-item.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index 48a2ea6d7092..2de1d8247494 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -568,7 +568,18 @@ blk_status_t btrfs_csum_one_bio(struct btrfs_inode *inode, struct bio *bio,
if (!ordered) { ordered = btrfs_lookup_ordered_extent(inode, offset); - BUG_ON(!ordered); /* Logic error */ + /* + * The bio range is not covered by any ordered extent, + * must be a code logic error. + */ + if (unlikely(!ordered)) { + WARN(1, KERN_WARNING + "no ordered extent for root %llu ino %llu offset %llu\n", + inode->root->root_key.objectid, + btrfs_ino(inode), offset); + kvfree(sums); + return BLK_STS_IOERR; + } }
nr_sectors = BTRFS_BYTES_TO_BLKS(fs_info,
From: Filipe Manana fdmanana@suse.com
[ Upstream commit 6b225baababf1e3d41a4250e802cbd193e1343fb ]
When we get an error flushing one device, during a super block commit, we record the error in the device structure, in the field 'last_flush_error'. This is used to later check if we should error out the super block commit, depending on whether the number of flush errors is greater than or equals to the maximum tolerated device failures for a raid profile.
However if we get a transient device flush error, unmount the filesystem and later try to mount it, we can fail the mount because we treat that past error as critical and consider the device is missing. Even if it's very likely that the error will happen again, as it's probably due to a hardware related problem, there may be cases where the error might not happen again. One example is during testing, and a test case like the new generic/648 from fstests always triggers this. The test cases generic/019 and generic/475 also trigger this scenario, but very sporadically.
When this happens we get an error like this:
$ mount /dev/sdc /mnt mount: /mnt wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error.
$ dmesg (...) [12918.886926] BTRFS warning (device sdc): chunk 13631488 missing 1 devices, max tolerance is 0 for writable mount [12918.888293] BTRFS warning (device sdc): writable mount is not allowed due to too many missing devices [12918.890853] BTRFS error (device sdc): open_ctree failed
The failure happens because when btrfs_check_rw_degradable() is called at mount time, or at remount from RO to RW time, is sees a non zero value in a device's ->last_flush_error attribute, and therefore considers that the device is 'missing'.
Fix this by setting a device's ->last_flush_error to zero when we close a device, making sure the error is not seen on the next mount attempt. We only need to track flush errors during the current mount, so that we never commit a super block if such errors happened.
Signed-off-by: Filipe Manana fdmanana@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/volumes.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 509811aabb3f..bd4f0581c7c3 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1147,6 +1147,19 @@ static void btrfs_close_one_device(struct btrfs_device *device) atomic_set(&device->dev_stats_ccnt, 0); extent_io_tree_release(&device->alloc_state);
+ /* + * Reset the flush error record. We might have a transient flush error + * in this mount, and if so we aborted the current transaction and set + * the fs to an error state, guaranteeing no super blocks can be further + * committed. However that error might be transient and if we unmount the + * filesystem and mount it again, we should allow the mount to succeed + * (btrfs_check_rw_degradable() should not fail) - if after mounting the + * filesystem again we still get flush errors, then we will again abort + * any transaction and set the error state, guaranteeing no commits of + * unsafe super blocks. + */ + device->last_flush_error = 0; + /* Verify the device is back in a pristine state */ ASSERT(!test_bit(BTRFS_DEV_STATE_FLUSH_SENT, &device->dev_state)); ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state));
From: Vladimir Oltean vladimir.oltean@nxp.com
[ Upstream commit cf9579976f724ad517cc15b7caadea728c7e245c ]
MDIO-attached devices might have interrupts and other things that might need quiesced when we kexec into a new kernel. Things are even more creepy when those interrupt lines are shared, and in that case it is absolutely mandatory to disable all interrupt sources.
Moreover, MDIO devices might be DSA switches, and DSA needs its own shutdown method to unlink from the DSA master, which is a new requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings").
So introduce a ->shutdown method in the MDIO device driver structure.
Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Reviewed-by: Andrew Lunn andrew@lunn.ch Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/mdio_device.c | 11 +++++++++++ include/linux/mdio.h | 3 +++ 2 files changed, 14 insertions(+)
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c index 0837319a52d7..797c41f5590e 100644 --- a/drivers/net/phy/mdio_device.c +++ b/drivers/net/phy/mdio_device.c @@ -179,6 +179,16 @@ static int mdio_remove(struct device *dev) return 0; }
+static void mdio_shutdown(struct device *dev) +{ + struct mdio_device *mdiodev = to_mdio_device(dev); + struct device_driver *drv = mdiodev->dev.driver; + struct mdio_driver *mdiodrv = to_mdio_driver(drv); + + if (mdiodrv->shutdown) + mdiodrv->shutdown(mdiodev); +} + /** * mdio_driver_register - register an mdio_driver with the MDIO layer * @drv: new mdio_driver to register @@ -193,6 +203,7 @@ int mdio_driver_register(struct mdio_driver *drv) mdiodrv->driver.bus = &mdio_bus_type; mdiodrv->driver.probe = mdio_probe; mdiodrv->driver.remove = mdio_remove; + mdiodrv->driver.shutdown = mdio_shutdown;
retval = driver_register(&mdiodrv->driver); if (retval) { diff --git a/include/linux/mdio.h b/include/linux/mdio.h index dbd69b3d170b..de5fb4b333ce 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -72,6 +72,9 @@ struct mdio_driver {
/* Clears up any memory if needed */ void (*remove)(struct mdio_device *mdiodev); + + /* Quiesces the device on system shutdown, turns off interrupts etc */ + void (*shutdown)(struct mdio_device *mdiodev); }; #define to_mdio_driver(d) \ container_of(to_mdio_common_driver(d), struct mdio_driver, mdiodrv)
From: Jan Beulich jbeulich@suse.com
[ Upstream commit 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f ]
When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the special considerations for the head of the SKB no longer apply. Don't mistakenly report ERROR to the frontend for the first entry in the list, even if - from all I can tell - this shouldn't matter much as the overall transmit will need to be considered failed anyway.
Signed-off-by: Jan Beulich jbeulich@suse.com Reviewed-by: Paul Durrant paul@xen.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/xen-netback/netback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 986b56970961..b0cbc7fead74 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -499,7 +499,7 @@ static int xenvif_tx_check_gop(struct xenvif_queue *queue, * the header's copy failed, and they are * sharing a slot, send an error */ - if (i == 0 && sharedslot) + if (i == 0 && !first_shinfo && sharedslot) xenvif_idx_release(queue, pending_idx, XEN_NETIF_RSP_ERROR); else
From: Linus Torvalds torvalds@linux-foundation.org
[ Upstream commit d8b1e10a2b8efaf71d151aa756052fbf2f3b6d57 ]
Guenter reported [1] that the pci_iounmap() changes remain problematic, with sparc64 allnoconfig and tinyconfig still not building due to the header file changes and confusion with the arch-specific pci_iounmap() implementation.
I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of doing its own thing, since it turns out that the sparc64 version of pci_iounmap() is somewhat buggy (see [2]). But in the meantime, this just fixes the build by avoiding the trivial re-definition of the empty case.
Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/ [1] Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvL... [2] Reported-by: Guenter Roeck linux@roeck-us.net Cc: David Miller davem@davemloft.net Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/sparc/lib/iomap.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/sparc/lib/iomap.c b/arch/sparc/lib/iomap.c index c9da9f139694..f3a8cd491ce0 100644 --- a/arch/sparc/lib/iomap.c +++ b/arch/sparc/lib/iomap.c @@ -19,8 +19,10 @@ void ioport_unmap(void __iomem *addr) EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap);
+#ifdef CONFIG_PCI void pci_iounmap(struct pci_dev *dev, void __iomem * addr) { /* nothing to do */ } EXPORT_SYMBOL(pci_iounmap); +#endif
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit 372d1f3e1bfede719864d0d1fbf3146b1e638c88 ]
The ext2_error() function syncs the filesystem so it sleeps. The caller is holding a spinlock so it's not allowed to sleep.
ext2_statfs() <- disables preempt -> ext2_count_free_blocks() -> ext2_get_group_desc()
Fix this by using WARN() to print an error message and a stack trace instead of using ext2_error().
Link: https://lore.kernel.org/r/20210921203233.GA16529@kili Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext2/balloc.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c index 1f3f4326bf3c..c17ccc19b938 100644 --- a/fs/ext2/balloc.c +++ b/fs/ext2/balloc.c @@ -48,10 +48,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, struct ext2_sb_info *sbi = EXT2_SB(sb);
if (block_group >= sbi->s_groups_count) { - ext2_error (sb, "ext2_get_group_desc", - "block_group >= groups_count - " - "block_group = %d, groups_count = %lu", - block_group, sbi->s_groups_count); + WARN(1, "block_group >= groups_count - " + "block_group = %d, groups_count = %lu", + block_group, sbi->s_groups_count);
return NULL; } @@ -59,10 +58,9 @@ struct ext2_group_desc * ext2_get_group_desc(struct super_block * sb, group_desc = block_group >> EXT2_DESC_PER_BLOCK_BITS(sb); offset = block_group & (EXT2_DESC_PER_BLOCK(sb) - 1); if (!sbi->s_group_desc[group_desc]) { - ext2_error (sb, "ext2_get_group_desc", - "Group descriptor not loaded - " - "block_group = %d, group_desc = %lu, desc = %lu", - block_group, group_desc, offset); + WARN(1, "Group descriptor not loaded - " + "block_group = %d, group_desc = %lu, desc = %lu", + block_group, group_desc, offset); return NULL; }
From: Ming Lei ming.lei@redhat.com
[ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ]
After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up.
Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Ming Lei ming.lei@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/sd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index f0c0935d7909..56e291708587 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3443,15 +3443,16 @@ static int sd_probe(struct device *dev) }
device_initialize(&sdkp->dev); - sdkp->dev.parent = dev; + sdkp->dev.parent = get_device(dev); sdkp->dev.class = &sd_disk_class; dev_set_name(&sdkp->dev, "%s", dev_name(dev));
error = device_add(&sdkp->dev); - if (error) - goto out_free_index; + if (error) { + put_device(&sdkp->dev); + goto out; + }
- get_device(dev); dev_set_drvdata(dev, sdkp);
gd->major = sd_major((index & 0xf0) >> 4);
From: Faizel K B faizel.kb@dicortech.com
[ Upstream commit f81c08f897adafd2ed43f86f00207ff929f0b2eb ]
testusb' application which uses 'usbtest' driver reports 'unknown speed' from the function 'find_testdev'. The variable 'entry->speed' was not updated from the application. The IOCTL mentioned in the FIXME comment can only report whether the connection is low speed or not. Speed is read using the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The call is implemented in the function 'handle_testdev' where the file descriptor was availble locally. Sample output is given below where 'high speed' is printed as the connected speed.
sudo ./testusb -a high speed /dev/bus/usb/001/011 0 /dev/bus/usb/001/011 test 0, 0.000015 secs /dev/bus/usb/001/011 test 1, 0.194208 secs /dev/bus/usb/001/011 test 2, 0.077289 secs /dev/bus/usb/001/011 test 3, 0.170604 secs /dev/bus/usb/001/011 test 4, 0.108335 secs /dev/bus/usb/001/011 test 5, 2.788076 secs /dev/bus/usb/001/011 test 6, 2.594610 secs /dev/bus/usb/001/011 test 7, 2.905459 secs /dev/bus/usb/001/011 test 8, 2.795193 secs /dev/bus/usb/001/011 test 9, 8.372651 secs /dev/bus/usb/001/011 test 10, 6.919731 secs /dev/bus/usb/001/011 test 11, 16.372687 secs /dev/bus/usb/001/011 test 12, 16.375233 secs /dev/bus/usb/001/011 test 13, 2.977457 secs /dev/bus/usb/001/011 test 14 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 17, 0.148826 secs /dev/bus/usb/001/011 test 18, 0.068718 secs /dev/bus/usb/001/011 test 19, 0.125992 secs /dev/bus/usb/001/011 test 20, 0.127477 secs /dev/bus/usb/001/011 test 21 --> 22 (Invalid argument) /dev/bus/usb/001/011 test 24, 4.133763 secs /dev/bus/usb/001/011 test 27, 2.140066 secs /dev/bus/usb/001/011 test 28, 2.120713 secs /dev/bus/usb/001/011 test 29, 0.507762 secs
Signed-off-by: Faizel K B faizel.kb@dicortech.com Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/usb/testusb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c index ee8208b2f946..69c3ead25313 100644 --- a/tools/usb/testusb.c +++ b/tools/usb/testusb.c @@ -265,12 +265,6 @@ static int find_testdev(const char *name, const struct stat *sb, int flag) }
entry->ifnum = ifnum; - - /* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */ - - fprintf(stderr, "%s speed\t%s\t%u\n", - speed(entry->speed), entry->name, entry->ifnum); - entry->next = testdevs; testdevs = entry; return 0; @@ -299,6 +293,14 @@ static void *handle_testdev (void *arg) return 0; }
+ status = ioctl(fd, USBDEVFS_GET_SPEED, NULL); + if (status < 0) + fprintf(stderr, "USBDEVFS_GET_SPEED failed %d\n", status); + else + dev->speed = status; + fprintf(stderr, "%s speed\t%s\t%u\n", + speed(dev->speed), dev->name, dev->ifnum); + restart: for (i = 0; i < TEST_CASES; i++) { if (dev->test != -1 && dev->test != i)
From: Yang Yingliang yangyingliang@huawei.com
[ Upstream commit 856e6e8e0f9300befa87dde09edb578555c99a82 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.
Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/hcd.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 6af1dcbc3656..30919f741b7f 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5074,6 +5074,10 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) hcd->has_tt = 1;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -EINVAL; + goto error1; + } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res);
From: Oded Gabbay ogabbay@kernel.org
[ Upstream commit 0a5ff77bf0a94468d541735f919a633f167787e9 ]
Couple of fixes to the LBW RR configuration:
1. Add missing configuration of the SM RR registers in the DMA_IF. 2. Remove HBW range that doesn't belong. 3. Add entire gap + DBG area, from end of TPC7 to end of entire DBG space.
Signed-off-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../misc/habanalabs/gaudi/gaudi_security.c | 115 ++++++++++-------- 1 file changed, 67 insertions(+), 48 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_security.c b/drivers/misc/habanalabs/gaudi/gaudi_security.c index 2d7add0e5bcc..9343a81d3122 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi_security.c +++ b/drivers/misc/habanalabs/gaudi/gaudi_security.c @@ -8,16 +8,21 @@ #include "gaudiP.h" #include "../include/gaudi/asic_reg/gaudi_regs.h"
-#define GAUDI_NUMBER_OF_RR_REGS 24 -#define GAUDI_NUMBER_OF_LBW_RANGES 12 +#define GAUDI_NUMBER_OF_LBW_RR_REGS 28 +#define GAUDI_NUMBER_OF_HBW_RR_REGS 24 +#define GAUDI_NUMBER_OF_LBW_RANGES 10
-static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_HIT_WPROT, mmDMA_IF_W_S_DMA0_HIT_WPROT, mmDMA_IF_W_S_DMA1_HIT_WPROT, + mmDMA_IF_E_S_SOB_HIT_WPROT, mmDMA_IF_E_S_DMA0_HIT_WPROT, mmDMA_IF_E_S_DMA1_HIT_WPROT, + mmDMA_IF_W_N_SOB_HIT_WPROT, mmDMA_IF_W_N_DMA0_HIT_WPROT, mmDMA_IF_W_N_DMA1_HIT_WPROT, + mmDMA_IF_E_N_SOB_HIT_WPROT, mmDMA_IF_E_N_DMA0_HIT_WPROT, mmDMA_IF_E_N_DMA1_HIT_WPROT, mmSIF_RTR_0_LBW_RANGE_PROT_HIT_AW, @@ -38,13 +43,17 @@ static u64 gaudi_rr_lbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_HIT_AW, };
-static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_HIT_RPROT, mmDMA_IF_W_S_DMA0_HIT_RPROT, mmDMA_IF_W_S_DMA1_HIT_RPROT, + mmDMA_IF_E_S_SOB_HIT_RPROT, mmDMA_IF_E_S_DMA0_HIT_RPROT, mmDMA_IF_E_S_DMA1_HIT_RPROT, + mmDMA_IF_W_N_SOB_HIT_RPROT, mmDMA_IF_W_N_DMA0_HIT_RPROT, mmDMA_IF_W_N_DMA1_HIT_RPROT, + mmDMA_IF_E_N_SOB_HIT_RPROT, mmDMA_IF_E_N_DMA0_HIT_RPROT, mmDMA_IF_E_N_DMA1_HIT_RPROT, mmSIF_RTR_0_LBW_RANGE_PROT_HIT_AR, @@ -65,13 +74,17 @@ static u64 gaudi_rr_lbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_HIT_AR, };
-static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MIN_WPROT_0, mmDMA_IF_W_S_DMA0_MIN_WPROT_0, mmDMA_IF_W_S_DMA1_MIN_WPROT_0, + mmDMA_IF_E_S_SOB_MIN_WPROT_0, mmDMA_IF_E_S_DMA0_MIN_WPROT_0, mmDMA_IF_E_S_DMA1_MIN_WPROT_0, + mmDMA_IF_W_N_SOB_MIN_WPROT_0, mmDMA_IF_W_N_DMA0_MIN_WPROT_0, mmDMA_IF_W_N_DMA1_MIN_WPROT_0, + mmDMA_IF_E_N_SOB_MIN_WPROT_0, mmDMA_IF_E_N_DMA0_MIN_WPROT_0, mmDMA_IF_E_N_DMA1_MIN_WPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MIN_AW_0, @@ -92,13 +105,17 @@ static u64 gaudi_rr_lbw_min_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MIN_AW_0, };
-static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MAX_WPROT_0, mmDMA_IF_W_S_DMA0_MAX_WPROT_0, mmDMA_IF_W_S_DMA1_MAX_WPROT_0, + mmDMA_IF_E_S_SOB_MAX_WPROT_0, mmDMA_IF_E_S_DMA0_MAX_WPROT_0, mmDMA_IF_E_S_DMA1_MAX_WPROT_0, + mmDMA_IF_W_N_SOB_MAX_WPROT_0, mmDMA_IF_W_N_DMA0_MAX_WPROT_0, mmDMA_IF_W_N_DMA1_MAX_WPROT_0, + mmDMA_IF_E_N_SOB_MAX_WPROT_0, mmDMA_IF_E_N_DMA0_MAX_WPROT_0, mmDMA_IF_E_N_DMA1_MAX_WPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MAX_AW_0, @@ -119,13 +136,17 @@ static u64 gaudi_rr_lbw_max_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MAX_AW_0, };
-static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MIN_RPROT_0, mmDMA_IF_W_S_DMA0_MIN_RPROT_0, mmDMA_IF_W_S_DMA1_MIN_RPROT_0, + mmDMA_IF_E_S_SOB_MIN_RPROT_0, mmDMA_IF_E_S_DMA0_MIN_RPROT_0, mmDMA_IF_E_S_DMA1_MIN_RPROT_0, + mmDMA_IF_W_N_SOB_MIN_RPROT_0, mmDMA_IF_W_N_DMA0_MIN_RPROT_0, mmDMA_IF_W_N_DMA1_MIN_RPROT_0, + mmDMA_IF_E_N_SOB_MIN_RPROT_0, mmDMA_IF_E_N_DMA0_MIN_RPROT_0, mmDMA_IF_E_N_DMA1_MIN_RPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MIN_AR_0, @@ -146,13 +167,17 @@ static u64 gaudi_rr_lbw_min_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MIN_AR_0, };
-static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_LBW_RR_REGS] = { + mmDMA_IF_W_S_SOB_MAX_RPROT_0, mmDMA_IF_W_S_DMA0_MAX_RPROT_0, mmDMA_IF_W_S_DMA1_MAX_RPROT_0, + mmDMA_IF_E_S_SOB_MAX_RPROT_0, mmDMA_IF_E_S_DMA0_MAX_RPROT_0, mmDMA_IF_E_S_DMA1_MAX_RPROT_0, + mmDMA_IF_W_N_SOB_MAX_RPROT_0, mmDMA_IF_W_N_DMA0_MAX_RPROT_0, mmDMA_IF_W_N_DMA1_MAX_RPROT_0, + mmDMA_IF_E_N_SOB_MAX_RPROT_0, mmDMA_IF_E_N_DMA0_MAX_RPROT_0, mmDMA_IF_E_N_DMA1_MAX_RPROT_0, mmSIF_RTR_0_LBW_RANGE_PROT_MAX_AR_0, @@ -173,7 +198,7 @@ static u64 gaudi_rr_lbw_max_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_7_LBW_RANGE_PROT_MAX_AR_0, };
-static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_HIT_AW, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_HIT_AW, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_HIT_AW, @@ -200,7 +225,7 @@ static u64 gaudi_rr_hbw_hit_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_HIT_AW };
-static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_HIT_AR, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_HIT_AR, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_HIT_AR, @@ -227,7 +252,7 @@ static u64 gaudi_rr_hbw_hit_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_HIT_AR };
-static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_LOW_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AW_0, @@ -254,7 +279,7 @@ static u64 gaudi_rr_hbw_base_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_LOW_AW_0 };
-static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_HIGH_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AW_0, @@ -281,7 +306,7 @@ static u64 gaudi_rr_hbw_base_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_HIGH_AW_0 };
-static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_LOW_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AW_0, @@ -308,7 +333,7 @@ static u64 gaudi_rr_hbw_mask_low_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_LOW_AW_0 };
-static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AW_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_HIGH_AW_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AW_0, @@ -335,7 +360,7 @@ static u64 gaudi_rr_hbw_mask_high_aw_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_HIGH_AW_0 };
-static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_LOW_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_LOW_AR_0, @@ -362,7 +387,7 @@ static u64 gaudi_rr_hbw_base_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_LOW_AR_0 };
-static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_BASE_HIGH_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_BASE_HIGH_AR_0, @@ -389,7 +414,7 @@ static u64 gaudi_rr_hbw_base_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_BASE_HIGH_AR_0 };
-static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_LOW_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_LOW_AR_0, @@ -416,7 +441,7 @@ static u64 gaudi_rr_hbw_mask_low_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { mmNIF_RTR_CTRL_7_RANGE_SEC_MASK_LOW_AR_0 };
-static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = { +static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_HBW_RR_REGS] = { mmDMA_IF_W_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AR_0, mmDMA_IF_W_S_DOWN_CH1_RANGE_SEC_MASK_HIGH_AR_0, mmDMA_IF_E_S_DOWN_CH0_RANGE_SEC_MASK_HIGH_AR_0, @@ -8870,50 +8895,44 @@ static void gaudi_init_range_registers_lbw(struct hl_device *hdev) u32 lbw_rng_end[GAUDI_NUMBER_OF_LBW_RANGES]; int i, j;
- lbw_rng_start[0] = (0xFBFE0000 & 0x3FFFFFF) - 1; - lbw_rng_end[0] = (0xFBFFF000 & 0x3FFFFFF) + 1; + lbw_rng_start[0] = (0xFC0E8000 & 0x3FFFFFF) - 1; /* 0x000E7FFF */ + lbw_rng_end[0] = (0xFC11FFFF & 0x3FFFFFF) + 1; /* 0x00120000 */
- lbw_rng_start[1] = (0xFC0E8000 & 0x3FFFFFF) - 1; - lbw_rng_end[1] = (0xFC120000 & 0x3FFFFFF) + 1; + lbw_rng_start[1] = (0xFC1E8000 & 0x3FFFFFF) - 1; /* 0x001E7FFF */ + lbw_rng_end[1] = (0xFC48FFFF & 0x3FFFFFF) + 1; /* 0x00490000 */
- lbw_rng_start[2] = (0xFC1E8000 & 0x3FFFFFF) - 1; - lbw_rng_end[2] = (0xFC48FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[2] = (0xFC600000 & 0x3FFFFFF) - 1; /* 0x005FFFFF */ + lbw_rng_end[2] = (0xFCC48FFF & 0x3FFFFFF) + 1; /* 0x00C49000 */
- lbw_rng_start[3] = (0xFC600000 & 0x3FFFFFF) - 1; - lbw_rng_end[3] = (0xFCC48FFF & 0x3FFFFFF) + 1; + lbw_rng_start[3] = (0xFCC4A000 & 0x3FFFFFF) - 1; /* 0x00C49FFF */ + lbw_rng_end[3] = (0xFCCDFFFF & 0x3FFFFFF) + 1; /* 0x00CE0000 */
- lbw_rng_start[4] = (0xFCC4A000 & 0x3FFFFFF) - 1; - lbw_rng_end[4] = (0xFCCDFFFF & 0x3FFFFFF) + 1; + lbw_rng_start[4] = (0xFCCE4000 & 0x3FFFFFF) - 1; /* 0x00CE3FFF */ + lbw_rng_end[4] = (0xFCD1FFFF & 0x3FFFFFF) + 1; /* 0x00D20000 */
- lbw_rng_start[5] = (0xFCCE4000 & 0x3FFFFFF) - 1; - lbw_rng_end[5] = (0xFCD1FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[5] = (0xFCD24000 & 0x3FFFFFF) - 1; /* 0x00D23FFF */ + lbw_rng_end[5] = (0xFCD5FFFF & 0x3FFFFFF) + 1; /* 0x00D60000 */
- lbw_rng_start[6] = (0xFCD24000 & 0x3FFFFFF) - 1; - lbw_rng_end[6] = (0xFCD5FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[6] = (0xFCD64000 & 0x3FFFFFF) - 1; /* 0x00D63FFF */ + lbw_rng_end[6] = (0xFCD9FFFF & 0x3FFFFFF) + 1; /* 0x00DA0000 */
- lbw_rng_start[7] = (0xFCD64000 & 0x3FFFFFF) - 1; - lbw_rng_end[7] = (0xFCD9FFFF & 0x3FFFFFF) + 1; + lbw_rng_start[7] = (0xFCDA4000 & 0x3FFFFFF) - 1; /* 0x00DA3FFF */ + lbw_rng_end[7] = (0xFCDDFFFF & 0x3FFFFFF) + 1; /* 0x00DE0000 */
- lbw_rng_start[8] = (0xFCDA4000 & 0x3FFFFFF) - 1; - lbw_rng_end[8] = (0xFCDDFFFF & 0x3FFFFFF) + 1; + lbw_rng_start[8] = (0xFCDE4000 & 0x3FFFFFF) - 1; /* 0x00DE3FFF */ + lbw_rng_end[8] = (0xFCE05FFF & 0x3FFFFFF) + 1; /* 0x00E06000 */
- lbw_rng_start[9] = (0xFCDE4000 & 0x3FFFFFF) - 1; - lbw_rng_end[9] = (0xFCE05FFF & 0x3FFFFFF) + 1; + lbw_rng_start[9] = (0xFCFC9000 & 0x3FFFFFF) - 1; /* 0x00FC8FFF */ + lbw_rng_end[9] = (0xFFFFFFFE & 0x3FFFFFF) + 1; /* 0x03FFFFFF */
- lbw_rng_start[10] = (0xFEC43000 & 0x3FFFFFF) - 1; - lbw_rng_end[10] = (0xFEC43FFF & 0x3FFFFFF) + 1; - - lbw_rng_start[11] = (0xFE484000 & 0x3FFFFFF) - 1; - lbw_rng_end[11] = (0xFE484FFF & 0x3FFFFFF) + 1; - - for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_LBW_RR_REGS ; i++) { WREG32(gaudi_rr_lbw_hit_aw_regs[i], (1 << GAUDI_NUMBER_OF_LBW_RANGES) - 1); WREG32(gaudi_rr_lbw_hit_ar_regs[i], (1 << GAUDI_NUMBER_OF_LBW_RANGES) - 1); }
- for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) + for (i = 0 ; i < GAUDI_NUMBER_OF_LBW_RR_REGS ; i++) for (j = 0 ; j < GAUDI_NUMBER_OF_LBW_RANGES ; j++) { WREG32(gaudi_rr_lbw_min_aw_regs[i] + (j << 2), lbw_rng_start[j]); @@ -8960,12 +8979,12 @@ static void gaudi_init_range_registers_hbw(struct hl_device *hdev) * 6th range is the host */
- for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_HBW_RR_REGS ; i++) { WREG32(gaudi_rr_hbw_hit_aw_regs[i], 0x1F); WREG32(gaudi_rr_hbw_hit_ar_regs[i], 0x1D); }
- for (i = 0 ; i < GAUDI_NUMBER_OF_RR_REGS ; i++) { + for (i = 0 ; i < GAUDI_NUMBER_OF_HBW_RR_REGS ; i++) { WREG32(gaudi_rr_hbw_base_low_aw_regs[i], dram_addr_lo); WREG32(gaudi_rr_hbw_base_low_ar_regs[i], dram_addr_lo);
From: Li Zhijian lizhijian@cn.fujitsu.com
[ Upstream commit 8914a7a247e065438a0ec86a58c1c359223d2c9e ]
LKP/0Day reported some building errors about kvm, and errors message are not always same: - lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared (first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’? - lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use in this function); did you mean ‘MAP_HUGE_16GB’?
Although kvm relies on the khdr, they still be built in parallel when -j is specified. In this case, it will cause compiling errors.
Here we mark target khdr as NOTPARALLEL to make it be always built first.
CC: Philip Li philip.li@intel.com Reported-by: kernel test robot lkp@intel.com Signed-off-by: Li Zhijian lizhijian@cn.fujitsu.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/lib.mk | 1 + 1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 0af84ad48aa7..b7217b5251f5 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -48,6 +48,7 @@ ARCH ?= $(SUBARCH) # When local build is done, headers are installed in the default # INSTALL_HDR_PATH usr/include. .PHONY: khdr +.NOTPARALLEL: khdr: ifndef KSFT_KHDR_INSTALL_DONE ifeq (1,$(DEFAULT_INSTALL_HDR_PATH))
From: Shuah Khan skhan@linuxfoundation.org
[ Upstream commit 39a71f712d8a13728febd8f3cb3f6db7e1fa7221 ]
Fix get_warnings_count() to check fscanf() return value to get rid of the following warning:
x86_64/mmio_warning_test.c: In function ‘get_warnings_count’: x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 85 | fscanf(f, "%d", &warnings); | ^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan skhan@linuxfoundation.org Acked-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/kvm/x86_64/mmio_warning_test.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c index e6480fd5c4bd..8039e1eff938 100644 --- a/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c +++ b/tools/testing/selftests/kvm/x86_64/mmio_warning_test.c @@ -82,7 +82,8 @@ int get_warnings_count(void) FILE *f;
f = popen("dmesg | grep "WARNING:" | wc -l", "r"); - fscanf(f, "%d", &warnings); + if (fscanf(f, "%d", &warnings) < 1) + warnings = 0; fclose(f);
return warnings;
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 555f66d0f8a38537456acc77043d0e4469fcbe8e ]
In case the number of hardware queues changes, we need to update the tagset and the mapping of ctx to hctx first.
If we try to create and connect the I/O queues first, this operation will fail (target will reject the connect call due to the wrong number of queues) and hence we bail out of the recreate function. Then we will to try the very same operation again, thus we don't make any progress.
Signed-off-by: Daniel Wagner dwagner@suse.de Reviewed-by: Ming Lei ming.lei@redhat.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: James Smart jsmart2021@gmail.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index a0bcec33b020..86c6862e71a1 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2952,14 +2952,6 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) if (ctrl->ctrl.queue_count == 1) return 0;
- ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); - if (ret) - goto out_free_io_queues; - - ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1); - if (ret) - goto out_delete_hw_queues; - if (prior_ioq_cnt != nr_io_queues) { dev_info(ctrl->ctrl.device, "reconnect: revising io queue count from %d to %d\n", @@ -2969,6 +2961,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) nvme_unfreeze(&ctrl->ctrl); }
+ ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); + if (ret) + goto out_free_io_queues; + + ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1); + if (ret) + goto out_delete_hw_queues; + return 0;
out_delete_hw_queues:
From: James Smart jsmart2021@gmail.com
[ Upstream commit e5445dae29d25d7b03e0a10d3d4277a1d0c8119b ]
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue.
This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc.
Signed-off-by: James Smart jsmart2021@gmail.com Tested-by: Daniel Wagner dwagner@suse.de Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Daniel Wagner dwagner@suse.de Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fc.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 86c6862e71a1..906cab35afe7 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2486,6 +2486,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) */ if (ctrl->ctrl.queue_count > 1) { nvme_stop_queues(&ctrl->ctrl); + nvme_sync_io_queues(&ctrl->ctrl); blk_mq_tagset_busy_iter(&ctrl->tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->tag_set); @@ -2509,6 +2510,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) * clean up the admin queue. Same thing as above. */ blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + blk_sync_queue(ctrl->ctrl.admin_q); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set);
From: Ansuel Smith ansuelsmth@gmail.com
[ Upstream commit cf96921876dcee4d6ac07b9de470368a075ba9ad ]
Some devices can have some thermal sensors disabled from the factory. The current two irq handler functions check all the sensor by default and the check if the sensor was actually registered is wrong. The tzd is actually never set if the registration fails hence the IS_ERR check is wrong.
Signed-off-by: Ansuel Smith ansuelsmth@gmail.com Reviewed-by: Matthias Kaehlcke mka@chromium.org Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Link: https://lore.kernel.org/r/20210907212543.20220-1-ansuelsmth@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/qcom/tsens.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 3c4c0516e58a..cb4f4b522446 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -415,7 +415,7 @@ static irqreturn_t tsens_critical_irq_thread(int irq, void *data) const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id;
- if (IS_ERR(s->tzd)) + if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue; @@ -465,7 +465,7 @@ static irqreturn_t tsens_irq_thread(int irq, void *data) const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id;
- if (IS_ERR(s->tzd)) + if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue;
From: Wen Xiong wenxiong@linux.ibm.com
[ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ]
Setting SCSI logging level with error=3, we saw some errors from enclosues:
[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427778] ses 0:0:9:0: Power-on or device reset occurred [108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current] [108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred [108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1 [108017.427804] ses 0:0:9:0: Failed to bind enclosure -19 [108017.427895] ses 0:0:10:0: Attached Enclosure device [108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13
Retry if the Send/Receive Diagnostic commands complete with a transient error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).
Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.i... Reviewed-by: Brian King brking@linux.ibm.com Reviewed-by: James Bottomley jejb@linux.ibm.com Signed-off-by: Wen Xiong wenxiong@linux.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ses.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index c2afba2a5414..43e682297fd5 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -87,9 +87,16 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code, 0 }; unsigned char recv_page_code; + unsigned int retries = SES_RETRIES; + struct scsi_sense_hdr sshdr; + + do { + ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (ret > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
- ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (unlikely(ret)) return ret;
@@ -121,9 +128,16 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code, bufflen & 0xff, 0 }; + struct scsi_sense_hdr sshdr; + unsigned int retries = SES_RETRIES; + + do { + result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, + &sshdr, SES_TIMEOUT, 1, NULL); + } while (result > 0 && --retries && scsi_sense_valid(&sshdr) && + (sshdr.sense_key == NOT_READY || + (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
- result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen, - NULL, SES_TIMEOUT, SES_RETRIES, NULL); if (result) sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", result);
From: Marc Zyngier maz@kernel.org
[ Upstream commit b78f26926b17cc289e4f16b63363abe0aa2e8efc ]
Geert reported that the GIC driver locks up on a Renesas system since 005c34ae4b44f085 ("irqchip/gic: Atomically update affinity") fixed the driver to use writeb_relaxed() instead of writel_relaxed().
As it turns out, the interconnect used on this system mandates 32bit wide accesses for all MMIO transactions, even if the GIC architecture specifically mandates for some registers to be byte accessible. Gahhh...
Work around the issue by crudly detecting the offending system, and falling back to an inefficient RMW+lock implementation.
Reported-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/CAMuHMdV+Ev47K5NO8XHsanSq5YRMCHn2gWAQyV-q2LpJVy9Hi... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-gic.c | 52 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 6053245a4754..176f5f06432d 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -107,6 +107,8 @@ static DEFINE_RAW_SPINLOCK(cpu_map_lock);
#endif
+static DEFINE_STATIC_KEY_FALSE(needs_rmw_access); + /* * The GIC mapping of CPU interfaces does not necessarily match * the logical CPU numbering. Let's use a mapping as returned @@ -777,6 +779,25 @@ static int gic_pm_init(struct gic_chip_data *gic) #endif
#ifdef CONFIG_SMP +static void rmw_writeb(u8 bval, void __iomem *addr) +{ + static DEFINE_RAW_SPINLOCK(rmw_lock); + unsigned long offset = (unsigned long)addr & 3UL; + unsigned long shift = offset * 8; + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&rmw_lock, flags); + + addr -= offset; + val = readl_relaxed(addr); + val &= ~GENMASK(shift + 7, shift); + val |= bval << shift; + writel_relaxed(val, addr); + + raw_spin_unlock_irqrestore(&rmw_lock, flags); +} + static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) { @@ -791,7 +812,10 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) return -EINVAL;
- writeb_relaxed(gic_cpu_map[cpu], reg); + if (static_branch_unlikely(&needs_rmw_access)) + rmw_writeb(gic_cpu_map[cpu], reg); + else + writeb_relaxed(gic_cpu_map[cpu], reg); irq_data_update_effective_affinity(d, cpumask_of(cpu));
return IRQ_SET_MASK_OK_DONE; @@ -1384,6 +1408,30 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base) return true; }
+static bool gic_enable_rmw_access(void *data) +{ + /* + * The EMEV2 class of machines has a broken interconnect, and + * locks up on accesses that are less than 32bit. So far, only + * the affinity setting requires it. + */ + if (of_machine_is_compatible("renesas,emev2")) { + static_branch_enable(&needs_rmw_access); + return true; + } + + return false; +} + +static const struct gic_quirk gic_quirks[] = { + { + .desc = "broken byte access", + .compatible = "arm,pl390", + .init = gic_enable_rmw_access, + }, + { }, +}; + static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node) { if (!gic || !node) @@ -1400,6 +1448,8 @@ static int gic_of_setup(struct gic_chip_data *gic, struct device_node *node) if (of_property_read_u32(node, "cpu-offset", &gic->percpu_offset)) gic->percpu_offset = 0;
+ gic_enable_of_quirks(node, gic_quirks, gic); + return 0;
error:
From: Steve French stfrench@microsoft.com
[ Upstream commit b06d893ef2492245d0319b4136edb4c346b687a3 ]
Address warning:
fs/smbfs_client/smb2pdu.c:2425 create_sd_buf() warn: struct type mismatch 'smb3_acl vs cifs_acl'
Pointed out by Dan Carpenter via smatch code analysis tool
Reported-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/smb2pdu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index ca5102773b72..88554b640b0d 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2339,7 +2339,7 @@ create_sd_buf(umode_t mode, bool set_owner, unsigned int *len) buf->sd.OffsetDacl = cpu_to_le32(ptr - (__u8 *)&buf->sd); /* Ship the ACL for now. we will copy it into buf later. */ aclptr = ptr; - ptr += sizeof(struct cifs_acl); + ptr += sizeof(struct smb3_acl);
/* create one ACE to hold the mode embedded in reserved special SID */ acelen = setup_special_mode_ACE((struct cifs_ace *)ptr, (__u64)mode); @@ -2364,7 +2364,7 @@ create_sd_buf(umode_t mode, bool set_owner, unsigned int *len) acl.AclRevision = ACL_REVISION; /* See 2.4.4.1 of MS-DTYP */ acl.AclSize = cpu_to_le16(acl_size); acl.AceCount = cpu_to_le16(ace_count); - memcpy(aclptr, &acl, sizeof(struct cifs_acl)); + memcpy(aclptr, &acl, sizeof(struct smb3_acl));
buf->ccontext.DataLength = cpu_to_le32(ptr - (__u8 *)&buf->sd); *len = roundup(ptr - (__u8 *)buf, 8);
From: Changbin Du changbin.du@gmail.com
[ Upstream commit ebaeab2fe87987cef28eb5ab174c42cd28594387 ]
Idle page tracking can also be used for process address space, not only file mappings.
Without this change, using with '-i' option for process address space encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor mark page idle: Bad file descriptor ...
Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com Signed-off-by: Changbin Du changbin.du@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/vm/page-types.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c index 0517c744b04e..f62f10c988db 100644 --- a/tools/vm/page-types.c +++ b/tools/vm/page-types.c @@ -1331,7 +1331,7 @@ int main(int argc, char *argv[]) if (opt_list && opt_list_mapcnt) kpagecount_fd = checked_open(PROC_KPAGECOUNT, O_RDONLY);
- if (opt_mark_idle && opt_file) + if (opt_mark_idle) page_idle_fd = checked_open(SYS_KERNEL_MM_PAGE_IDLE, O_RDWR);
if (opt_list && opt_pid)
linux-stable-mirror@lists.linaro.org
-
Sasha Levin