This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.9.12-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.9.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 6.9.12-rc1
Jann Horn jannh@google.com filelock: Fix fcntl/close race recovery compat path
Takashi Iwai tiwai@suse.de ALSA: seq: ump: Skip useless ports for static blocks
Shengjiu Wang shengjiu.wang@nxp.com ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB
Abel Vesa abel.vesa@linaro.org arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators
Abel Vesa abel.vesa@linaro.org arm64: dts: qcom: x1e80100-qcp: Fix the PHY regulator for PCIe 6a
Abel Vesa abel.vesa@linaro.org arm64: dts: qcom: x1e80100-crd: Fix the PHY regulator for PCIe 6a
Dmitry Baryshkov dmitry.baryshkov@linaro.org arm64: dts: qcom: qrb4210-rb2: switch I2C2 to i2c-gpio
Dmitry Baryshkov dmitry.baryshkov@linaro.org arm64: dts: qcom: qrb2210-rb1: switch I2C2 to i2c-gpio
Abel Vesa abel.vesa@linaro.org arm64: dts: qcom: x1e80100-qcp: Fix USB PHYs regulators
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: sc7280: Disable SuperSpeed instances in park mode
Krishna Kurapati quic_kriskura@quicinc.com arm64: dts: qcom: sc7180: Disable SuperSpeed instances in park mode
Seunghun Han kkamagui@gmail.com ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
Edson Juliano Drosdeck edson.drosdeck@gmail.com ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
Shenghao Ding shenghao-ding@ti.com ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
Takashi Iwai tiwai@suse.de usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
lei lu llfamsec@gmail.com fs/ntfs3: Validate ff offset
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add a check for attr_names and oatbl
lei lu llfamsec@gmail.com jfs: don't walk off the end of ealist
lei lu llfamsec@gmail.com ocfs2: add bounds checking to ocfs2_check_dir_entry()
Gerald Schaefer gerald.schaefer@linux.ibm.com s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
Dan Carpenter dan.carpenter@linaro.org drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()
-------------
Diffstat:
Makefile | 4 +-- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 1 + arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8998.dtsi | 1 + arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 13 ++++++++- arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 13 ++++++++- arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 + arch/arm64/boot/dts/qcom/sdm630.dtsi | 1 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 ++ arch/arm64/boot/dts/qcom/sm6115.dtsi | 1 + arch/arm64/boot/dts/qcom/sm6350.dtsi | 1 + arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 17 +++++++++--- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 17 +++++++++--- arch/s390/mm/fault.c | 3 +- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 2 +- drivers/usb/gadget/function/f_midi2.c | 19 +++++++------ fs/jfs/xattr.c | 23 +++++++++++++--- fs/locks.c | 9 +++--- fs/ntfs3/fslog.c | 44 ++++++++++++++++++++++++----- fs/ocfs2/dir.c | 46 +++++++++++++++++++------------ sound/core/pcm_dmaengine.c | 6 +++- sound/core/seq/seq_ump_client.c | 16 +++++++++++ sound/pci/hda/patch_realtek.c | 3 ++ 25 files changed, 191 insertions(+), 56 deletions(-)
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter dan.carpenter@linaro.org
commit 6769a23697f17f9bf9365ca8ed62fe37e361a05a upstream.
The "instance" variable needs to be signed for the error handling to work.
Fixes: 8b2faf1a4f3b ("drm/amdgpu: add error handle to avoid out-of-bounds") Reviewed-by: Bob Zhou bob.zhou@amd.com Signed-off-by: Dan Carpenter dan.carpenter@linaro.org Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: Siddh Raman Pant siddh.raman.pant@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c @@ -2017,7 +2017,7 @@ static int sdma_v4_0_process_trap_irq(st struct amdgpu_irq_src *source, struct amdgpu_iv_entry *entry) { - uint32_t instance; + int instance;
DRM_DEBUG("IH: SDMA trap\n"); instance = sdma_v4_0_irq_id_to_seq(entry->client_id);
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gerald Schaefer gerald.schaefer@linux.ibm.com
commit df39038cd89525d465c2c8827eb64116873f141a upstream.
There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on s390. Therefore we do not expect to see VM_FAULT_HWPOISON in do_exception().
However, since commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general"), it is possible to see VM_FAULT_HWPOISON in combination with PTE_MARKER_POISONED, even on architectures that do not support HWPOISON otherwise. In this case, we will end up on the BUG() in do_exception().
Fix this by treating VM_FAULT_HWPOISON the same as VM_FAULT_SIGBUS, similar to x86 when MEMORY_FAILURE is not configured. Also print unexpected fault flags, for easier debugging.
Note that VM_FAULT_HWPOISON_LARGE is not expected, because s390 cannot support swap entries on other levels than PTE level.
Cc: stable@vger.kernel.org # 6.6+ Fixes: af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general") Reported-by: Yunseong Kim yskelg@gmail.com Tested-by: Yunseong Kim yskelg@gmail.com Acked-by: Alexander Gordeev agordeev@linux.ibm.com Signed-off-by: Gerald Schaefer gerald.schaefer@linux.ibm.com Message-ID: 20240715180416.3632453-1-gerald.schaefer@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/s390/mm/fault.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -432,12 +432,13 @@ error: handle_fault_error_nolock(regs, 0); else do_sigsegv(regs, SEGV_MAPERR); - } else if (fault & VM_FAULT_SIGBUS) { + } else if (fault & (VM_FAULT_SIGBUS | VM_FAULT_HWPOISON)) { if (!user_mode(regs)) handle_fault_error_nolock(regs, 0); else do_sigbus(regs); } else { + pr_emerg("Unexpected fault flags: %08x\n", fault); BUG(); } }
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: lei lu llfamsec@gmail.com
commit 255547c6bb8940a97eea94ef9d464ea5967763fb upstream.
This adds sanity checks for ocfs2_dir_entry to make sure all members of ocfs2_dir_entry don't stray beyond valid memory region.
Link: https://lkml.kernel.org/r/20240626104433.163270-1-llfamsec@gmail.com Signed-off-by: lei lu llfamsec@gmail.com Reviewed-by: Heming Zhao heming.zhao@suse.com Reviewed-by: Joseph Qi joseph.qi@linux.alibaba.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Changwei Ge gechangwei@live.cn Cc: Gang He ghe@suse.com Cc: Jun Piao piaojun@huawei.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ocfs2/dir.c | 46 +++++++++++++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 17 deletions(-)
--- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -294,13 +294,16 @@ out: * bh passed here can be an inode block or a dir data block, depending * on the inode inline data flag. */ -static int ocfs2_check_dir_entry(struct inode * dir, - struct ocfs2_dir_entry * de, - struct buffer_head * bh, +static int ocfs2_check_dir_entry(struct inode *dir, + struct ocfs2_dir_entry *de, + struct buffer_head *bh, + char *buf, + unsigned int size, unsigned long offset) { const char *error_msg = NULL; const int rlen = le16_to_cpu(de->rec_len); + const unsigned long next_offset = ((char *) de - buf) + rlen;
if (unlikely(rlen < OCFS2_DIR_REC_LEN(1))) error_msg = "rec_len is smaller than minimal"; @@ -308,9 +311,11 @@ static int ocfs2_check_dir_entry(struct error_msg = "rec_len % 4 != 0"; else if (unlikely(rlen < OCFS2_DIR_REC_LEN(de->name_len))) error_msg = "rec_len is too small for name_len"; - else if (unlikely( - ((char *) de - bh->b_data) + rlen > dir->i_sb->s_blocksize)) - error_msg = "directory entry across blocks"; + else if (unlikely(next_offset > size)) + error_msg = "directory entry overrun"; + else if (unlikely(next_offset > size - OCFS2_DIR_REC_LEN(1)) && + next_offset != size) + error_msg = "directory entry too close to end";
if (unlikely(error_msg != NULL)) mlog(ML_ERROR, "bad entry in directory #%llu: %s - " @@ -352,16 +357,17 @@ static inline int ocfs2_search_dirblock( de_buf = first_de; dlimit = de_buf + bytes;
- while (de_buf < dlimit) { + while (de_buf < dlimit - OCFS2_DIR_MEMBER_LEN) { /* this code is executed quadratically often */ /* do minimal checking `by hand' */
de = (struct ocfs2_dir_entry *) de_buf;
- if (de_buf + namelen <= dlimit && + if (de->name + namelen <= dlimit && ocfs2_match(namelen, name, de)) { /* found a match - just to be sure, do a full check */ - if (!ocfs2_check_dir_entry(dir, de, bh, offset)) { + if (!ocfs2_check_dir_entry(dir, de, bh, first_de, + bytes, offset)) { ret = -1; goto bail; } @@ -1138,7 +1144,7 @@ static int __ocfs2_delete_entry(handle_t pde = NULL; de = (struct ocfs2_dir_entry *) first_de; while (i < bytes) { - if (!ocfs2_check_dir_entry(dir, de, bh, i)) { + if (!ocfs2_check_dir_entry(dir, de, bh, first_de, bytes, i)) { status = -EIO; mlog_errno(status); goto bail; @@ -1635,7 +1641,8 @@ int __ocfs2_add_entry(handle_t *handle, /* These checks should've already been passed by the * prepare function, but I guess we can leave them * here anyway. */ - if (!ocfs2_check_dir_entry(dir, de, insert_bh, offset)) { + if (!ocfs2_check_dir_entry(dir, de, insert_bh, data_start, + size, offset)) { retval = -ENOENT; goto bail; } @@ -1774,7 +1781,8 @@ static int ocfs2_dir_foreach_blk_id(stru }
de = (struct ocfs2_dir_entry *) (data->id_data + ctx->pos); - if (!ocfs2_check_dir_entry(inode, de, di_bh, ctx->pos)) { + if (!ocfs2_check_dir_entry(inode, de, di_bh, (char *)data->id_data, + i_size_read(inode), ctx->pos)) { /* On error, skip the f_pos to the end. */ ctx->pos = i_size_read(inode); break; @@ -1867,7 +1875,8 @@ static int ocfs2_dir_foreach_blk_el(stru while (ctx->pos < i_size_read(inode) && offset < sb->s_blocksize) { de = (struct ocfs2_dir_entry *) (bh->b_data + offset); - if (!ocfs2_check_dir_entry(inode, de, bh, offset)) { + if (!ocfs2_check_dir_entry(inode, de, bh, bh->b_data, + sb->s_blocksize, offset)) { /* On error, skip the f_pos to the next block. */ ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1; @@ -3339,7 +3348,7 @@ static int ocfs2_find_dir_space_id(struc struct super_block *sb = dir->i_sb; struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data; struct ocfs2_dir_entry *de, *last_de = NULL; - char *de_buf, *limit; + char *first_de, *de_buf, *limit; unsigned long offset = 0; unsigned int rec_len, new_rec_len, free_space;
@@ -3352,14 +3361,16 @@ static int ocfs2_find_dir_space_id(struc else free_space = dir->i_sb->s_blocksize - i_size_read(dir);
- de_buf = di->id2.i_data.id_data; + first_de = di->id2.i_data.id_data; + de_buf = first_de; limit = de_buf + i_size_read(dir); rec_len = OCFS2_DIR_REC_LEN(namelen);
while (de_buf < limit) { de = (struct ocfs2_dir_entry *)de_buf;
- if (!ocfs2_check_dir_entry(dir, de, di_bh, offset)) { + if (!ocfs2_check_dir_entry(dir, de, di_bh, first_de, + i_size_read(dir), offset)) { ret = -ENOENT; goto out; } @@ -3441,7 +3452,8 @@ static int ocfs2_find_dir_space_el(struc /* move to next block */ de = (struct ocfs2_dir_entry *) bh->b_data; } - if (!ocfs2_check_dir_entry(dir, de, bh, offset)) { + if (!ocfs2_check_dir_entry(dir, de, bh, bh->b_data, blocksize, + offset)) { status = -ENOENT; goto bail; }
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: lei lu llfamsec@gmail.com
commit d0fa70aca54c8643248e89061da23752506ec0d4 upstream.
Add a check before visiting the members of ea to make sure each ea stays within the ealist.
Signed-off-by: lei lu llfamsec@gmail.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/jfs/xattr.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
--- a/fs/jfs/xattr.c +++ b/fs/jfs/xattr.c @@ -797,7 +797,7 @@ ssize_t __jfs_getxattr(struct inode *ino size_t buf_size) { struct jfs_ea_list *ealist; - struct jfs_ea *ea; + struct jfs_ea *ea, *ealist_end; struct ea_buffer ea_buf; int xattr_size; ssize_t size; @@ -817,9 +817,16 @@ ssize_t __jfs_getxattr(struct inode *ino goto not_found;
ealist = (struct jfs_ea_list *) ea_buf.xattr; + ealist_end = END_EALIST(ealist);
/* Find the named attribute */ - for (ea = FIRST_EA(ealist); ea < END_EALIST(ealist); ea = NEXT_EA(ea)) + for (ea = FIRST_EA(ealist); ea < ealist_end; ea = NEXT_EA(ea)) { + if (unlikely(ea + 1 > ealist_end) || + unlikely(NEXT_EA(ea) > ealist_end)) { + size = -EUCLEAN; + goto release; + } + if ((namelen == ea->namelen) && memcmp(name, ea->name, namelen) == 0) { /* Found it */ @@ -834,6 +841,7 @@ ssize_t __jfs_getxattr(struct inode *ino memcpy(data, value, size); goto release; } + } not_found: size = -ENODATA; release: @@ -861,7 +869,7 @@ ssize_t jfs_listxattr(struct dentry * de ssize_t size = 0; int xattr_size; struct jfs_ea_list *ealist; - struct jfs_ea *ea; + struct jfs_ea *ea, *ealist_end; struct ea_buffer ea_buf;
down_read(&JFS_IP(inode)->xattr_sem); @@ -876,9 +884,16 @@ ssize_t jfs_listxattr(struct dentry * de goto release;
ealist = (struct jfs_ea_list *) ea_buf.xattr; + ealist_end = END_EALIST(ealist);
/* compute required size of list */ - for (ea = FIRST_EA(ealist); ea < END_EALIST(ealist); ea = NEXT_EA(ea)) { + for (ea = FIRST_EA(ealist); ea < ealist_end; ea = NEXT_EA(ea)) { + if (unlikely(ea + 1 > ealist_end) || + unlikely(NEXT_EA(ea) > ealist_end)) { + size = -EUCLEAN; + goto release; + } + if (can_list(ea)) size += name_size(ea) + 1; }
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
commit 702d4930eb06dcfda85a2fa67e8a1a27bfa2a845 upstream.
Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).
Reported-by: lei lu llfamsec@gmail.com Fixes: 865e7a7700d93 ("fs/ntfs3: Reduce stack usage") Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ntfs3/fslog.c | 38 ++++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-)
--- a/fs/ntfs3/fslog.c +++ b/fs/ntfs3/fslog.c @@ -3722,6 +3722,8 @@ int log_replay(struct ntfs_inode *ni, bo
u64 rec_lsn, checkpt_lsn = 0, rlsn = 0; struct ATTR_NAME_ENTRY *attr_names = NULL; + u32 attr_names_bytes = 0; + u32 oatbl_bytes = 0; struct RESTART_TABLE *dptbl = NULL; struct RESTART_TABLE *trtbl = NULL; const struct RESTART_TABLE *rt; @@ -3736,6 +3738,7 @@ int log_replay(struct ntfs_inode *ni, bo struct NTFS_RESTART *rst = NULL; struct lcb *lcb = NULL; struct OPEN_ATTR_ENRTY *oe; + struct ATTR_NAME_ENTRY *ane; struct TRANSACTION_ENTRY *tr; struct DIR_PAGE_ENTRY *dp; u32 i, bytes_per_attr_entry; @@ -4314,17 +4317,40 @@ check_attr_table: lcb = NULL;
check_attribute_names2: - if (rst->attr_names_len && oatbl) { - struct ATTR_NAME_ENTRY *ane = attr_names; - while (ane->off) { + if (attr_names && oatbl) { + off = 0; + for (;;) { + /* Check we can use attribute name entry 'ane'. */ + static_assert(sizeof(*ane) == 4); + if (off + sizeof(*ane) > attr_names_bytes) { + /* just ignore the rest. */ + break; + } + + ane = Add2Ptr(attr_names, off); + t16 = le16_to_cpu(ane->off); + if (!t16) { + /* this is the only valid exit. */ + break; + } + + /* Check we can use open attribute entry 'oe'. */ + if (t16 + sizeof(*oe) > oatbl_bytes) { + /* just ignore the rest. */ + break; + } + /* TODO: Clear table on exit! */ - oe = Add2Ptr(oatbl, le16_to_cpu(ane->off)); + oe = Add2Ptr(oatbl, t16); t16 = le16_to_cpu(ane->name_bytes); + off += t16 + sizeof(*ane); + if (off > attr_names_bytes) { + /* just ignore the rest. */ + break; + } oe->name_len = t16 / sizeof(short); oe->ptr = ane->name; oe->is_attr_name = 2; - ane = Add2Ptr(ane, - sizeof(struct ATTR_NAME_ENTRY) + t16); } }
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: lei lu llfamsec@gmail.com
commit 50c47879650b4c97836a0086632b3a2e300b0f06 upstream.
This adds sanity checks for ff offset. There is a check on rt->first_free at first, but walking through by ff without any check. If the second ff is a large offset. We may encounter an out-of-bound read.
Signed-off-by: lei lu llfamsec@gmail.com Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ntfs3/fslog.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/fs/ntfs3/fslog.c +++ b/fs/ntfs3/fslog.c @@ -724,7 +724,8 @@ static bool check_rstbl(const struct RES
if (!rsize || rsize > bytes || rsize + sizeof(struct RESTART_TABLE) > bytes || bytes < ts || - le16_to_cpu(rt->total) > ne || ff > ts || lf > ts || + le16_to_cpu(rt->total) > ne || + ff > ts - sizeof(__le32) || lf > ts - sizeof(__le32) || (ff && ff < sizeof(struct RESTART_TABLE)) || (lf && lf < sizeof(struct RESTART_TABLE))) { return false; @@ -754,6 +755,9 @@ static bool check_rstbl(const struct RES return false;
off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off)); + + if (off > ts - sizeof(__le32)) + return false; }
return true;
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai tiwai@suse.de
commit 3eb27d3e32c78badbc4db6ae76614b5961e32291 upstream.
The MIDI2 gadget driver handled the default MIDI protocol version incorrectly due to the confusion of the protocol version passed via configfs (either 1 or 2) and UMP protocol bits (0x100 / 0x200). As a consequence, the default protocol always resulted in MIDI1.
This patch addresses the misunderstanding of the protocol handling.
Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support") Cc: stable stable@kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Link: https://lore.kernel.org/r/20240708095719.25627-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/function/f_midi2.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)
--- a/drivers/usb/gadget/function/f_midi2.c +++ b/drivers/usb/gadget/function/f_midi2.c @@ -150,6 +150,9 @@ struct f_midi2 {
#define func_to_midi2(f) container_of(f, struct f_midi2, func)
+/* convert from MIDI protocol number (1 or 2) to SNDRV_UMP_EP_INFO_PROTO_* */ +#define to_ump_protocol(v) (((v) & 3) << 8) + /* get EP name string */ static const char *ump_ep_name(const struct f_midi2_ep *ep) { @@ -564,8 +567,7 @@ static void reply_ump_stream_ep_config(s .status = UMP_STREAM_MSG_STATUS_STREAM_CFG, };
- if ((ep->info.protocol & SNDRV_UMP_EP_INFO_PROTO_MIDI_MASK) == - SNDRV_UMP_EP_INFO_PROTO_MIDI2) + if (ep->info.protocol == 2) rep.protocol = UMP_STREAM_MSG_EP_INFO_CAP_MIDI2 >> 8; else rep.protocol = UMP_STREAM_MSG_EP_INFO_CAP_MIDI1 >> 8; @@ -627,13 +629,13 @@ static void process_ump_stream_msg(struc return; case UMP_STREAM_MSG_STATUS_STREAM_CFG_REQUEST: if (*data & UMP_STREAM_MSG_EP_INFO_CAP_MIDI2) { - ep->info.protocol = SNDRV_UMP_EP_INFO_PROTO_MIDI2; + ep->info.protocol = 2; DBG(midi2, "Switching Protocol to MIDI2\n"); } else { - ep->info.protocol = SNDRV_UMP_EP_INFO_PROTO_MIDI1; + ep->info.protocol = 1; DBG(midi2, "Switching Protocol to MIDI1\n"); } - snd_ump_switch_protocol(ep->ump, ep->info.protocol); + snd_ump_switch_protocol(ep->ump, to_ump_protocol(ep->info.protocol)); reply_ump_stream_ep_config(ep); return; case UMP_STREAM_MSG_STATUS_FB_DISCOVERY: @@ -1065,7 +1067,8 @@ static void f_midi2_midi1_ep_out_complet group = midi2->out_cable_mapping[cable].group; bytes = midi1_packet_bytes[*buf & 0x0f]; for (c = 0; c < bytes; c++) { - snd_ump_convert_to_ump(cvt, group, ep->info.protocol, + snd_ump_convert_to_ump(cvt, group, + to_ump_protocol(ep->info.protocol), buf[c + 1]); if (cvt->ump_bytes) { snd_ump_receive(ep->ump, cvt->ump, @@ -1375,7 +1378,7 @@ static void assign_block_descriptors(str desc->nNumGroupTrm = b->num_groups; desc->iBlockItem = ep->blks[blk].string_id;
- if (ep->info.protocol & SNDRV_UMP_EP_INFO_PROTO_MIDI2) + if (ep->info.protocol == 2) desc->bMIDIProtocol = USB_MS_MIDI_PROTO_2_0; else desc->bMIDIProtocol = USB_MS_MIDI_PROTO_1_0_128; @@ -1552,7 +1555,7 @@ static int f_midi2_create_card(struct f_ if (midi2->info.static_block) ump->info.flags |= SNDRV_UMP_EP_INFO_STATIC_BLOCKS; ump->info.protocol_caps = (ep->info.protocol_caps & 3) << 8; - ump->info.protocol = (ep->info.protocol & 3) << 8; + ump->info.protocol = to_ump_protocol(ep->info.protocol); ump->info.version = 0x0101; ump->info.family_id = ep->info.family; ump->info.model_id = ep->info.model;
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shenghao Ding shenghao-ding@ti.com
commit 1e5597e5ff18d452cf9afa847e904f301d1ac690 upstream.
Add new vendor_id and subsystem_id in quirk for Lenovo Hera2 Laptop.
Signed-off-by: Shenghao Ding shenghao-ding@ti.com Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240717115305.723-1-shenghao-ding@ti.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10488,6 +10488,7 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x17aa, 0x231a, "Thinkpad Z16 Gen2", ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x231e, "Thinkpad", ALC287_FIXUP_LENOVO_THKPAD_WH_ALC1318), SND_PCI_QUIRK(0x17aa, 0x231f, "Thinkpad", ALC287_FIXUP_LENOVO_THKPAD_WH_ALC1318), + SND_PCI_QUIRK(0x17aa, 0x2326, "Hera2", ALC287_FIXUP_TAS2781_I2C), SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Edson Juliano Drosdeck edson.drosdeck@gmail.com
commit 8fc1e8b230771442133d5cf5fa4313277aa2bb8b upstream.
Positivo SU C1400 is equipped with ALC256, and it needs ALC269_FIXUP_ASPIRE_HEADSET_MIC quirk to make its headset mic work.
Signed-off-by: Edson Juliano Drosdeck edson.drosdeck@gmail.com Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240712180642.22564-1-edson.drosdeck@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10333,6 +10333,7 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE), SND_PCI_QUIRK(0x10ec, 0x118c, "Medion EE4254 MD62100", ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE), + SND_PCI_QUIRK(0x10ec, 0x119e, "Positivo SU C1400", ALC269_FIXUP_ASPIRE_HEADSET_MIC), SND_PCI_QUIRK(0x10ec, 0x11bc, "VAIO VJFE-IL", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x10ec, 0x1230, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0x10ec, 0x124c, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK),
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seunghun Han kkamagui@gmail.com
commit d7063c08738573fc2f3296da6d31a22fa8aa843a upstream.
Samsung Galaxy Book Pro 360 (13" 2022 NT935QDB-KC71S) with codec SSID 144d:c1a4 requires the same workaround to enable the speaker amp as other Samsung models with the ALC298 codec.
Signed-off-by: Seunghun Han kkamagui@gmail.com Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240718080908.8677-1-kkamagui@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10348,6 +10348,7 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_AMP), SND_PCI_QUIRK(0x144d, 0xc18a, "Samsung Galaxy Book Ion (NP930XCJ-K01US)", ALC298_FIXUP_SAMSUNG_AMP), SND_PCI_QUIRK(0x144d, 0xc1a3, "Samsung Galaxy Book Pro (NP935XDB-KC1SE)", ALC298_FIXUP_SAMSUNG_AMP), + SND_PCI_QUIRK(0x144d, 0xc1a4, "Samsung Galaxy Book Pro 360 (NT935QBD)", ALC298_FIXUP_SAMSUNG_AMP), SND_PCI_QUIRK(0x144d, 0xc1a6, "Samsung Galaxy Book Pro 360 (NP930QBD)", ALC298_FIXUP_SAMSUNG_AMP), SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8), SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_AMP),
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit 5b8baed4b88132c12010ce6ca1b56f00d122e376 upstream.
On SC7180, in host mode, it is observed that stressing out controller results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instances in park mode for SC7180 to mitigate this issue.
Reported-by: Doug Anderson dianders@google.com Cc: stable@vger.kernel.org Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240604060659.1449278-2-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -3063,6 +3063,7 @@ iommus = <&apps_smmu 0x540 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed";
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit 3d930f1750ce30a6c36dbc71f8ff7e20322b94d7 upstream.
On SC7280, in host mode, it is observed that stressing out controller results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instances in park mode for SC7280 to mitigate this issue.
Reported-by: Doug Anderson dianders@google.com Cc: stable@vger.kernel.org Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240604060659.1449278-3-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -4131,6 +4131,7 @@ iommus = <&apps_smmu 0xe0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed";
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Abel Vesa abel.vesa@linaro.org
commit 20676f7819d7364b7e8bd437b212106faa893b49 upstream.
The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J. Also add the missing supplies to QMP PHYs.
Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support") Signed-off-by: Abel Vesa abel.vesa@linaro.org Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Cc: stable@vger.kernel.org # 6.9 Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-2-6e... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -520,12 +520,15 @@
&usb_1_ss0_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>;
status = "okay"; };
&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + status = "okay"; };
@@ -540,12 +543,15 @@
&usb_1_ss1_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>;
status = "okay"; };
&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; };
@@ -560,12 +566,15 @@
&usb_1_ss2_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>;
status = "okay"; };
&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; };
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Baryshkov dmitry.baryshkov@linaro.org
commit b7b545ccc08873e107aa24c461b1fdb123dd3761 upstream.
On the Qualcomm RB1 platform the I2C bus connected to the LT9611UXC bridge under some circumstances can go into a state when all transfers timeout. This causes both issues with fetching of EDID and with updating of the bridge's firmware. While we are debugging the issue, switch corresponding I2C bus to use i2c-gpio driver. While using i2c-gpio no communication issues are observed.
This patch is asusmed to be a temporary fix, so it is implemented in a non-intrusive manner to simply reverting it later.
Fixes: 616eda24edd4 ("arm64: dts: qcom: qrb2210-rb1: Set up HDMI") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Caleb Connolly caleb.connolly@linaro.org Link: https://lore.kernel.org/r/20240605-rb12-i2c2g-pio-v2-1-946f5d6b6948@linaro.o... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index bb5191422660..8c27d52139a1 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -59,6 +59,17 @@ hdmi_con: endpoint { }; };
+ i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + leds { compatible = "gpio-leds";
@@ -199,7 +210,7 @@ &gpi_dma0 { status = "okay"; };
-&i2c2 { +&i2c2_gpio { clock-frequency = <400000>; status = "okay";
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Baryshkov dmitry.baryshkov@linaro.org
commit f77e7bd40c3c2d79685e9cc80de874b69a976f55 upstream.
On the Qualcomm RB2 platform the I2C bus connected to the LT9611UXC bridge under some circumstances can go into a state when all transfers timeout. This causes both issues with fetching of EDID and with updating of the bridge's firmware. While we are debugging the issue, switch corresponding I2C bus to use i2c-gpio driver. While using i2c-gpio no communication issues are observed.
This patch is asusmed to be a temporary fix, so it is implemented in a non-intrusive manner to simply reverting it later.
Fixes: f7b01e07e89c ("arm64: dts: qcom: qrb4210-rb2: Enable display out") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Caleb Connolly caleb.connolly@linaro.org Link: https://lore.kernel.org/r/20240605-rb12-i2c2g-pio-v2-2-946f5d6b6948@linaro.o... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -60,6 +60,17 @@ }; };
+ i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + leds { compatible = "gpio-leds";
@@ -190,7 +201,7 @@ }; };
-&i2c2 { +&i2c2_gpio { clock-frequency = <400000>; status = "okay";
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Abel Vesa abel.vesa@linaro.org
commit cf7d2157aa87dca6f078a2d4867fd0a9dbc357aa upstream.
The actual PHY regulator is L1d instead of L3j, so fix it accordingly.
Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Signed-off-by: Abel Vesa abel.vesa@linaro.org Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Cc: stable@vger.kernel.org # 6.9 Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-1-ee17a9939ba5@lin... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -657,7 +657,7 @@ };
&pcie6a_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-phy-supply = <&vreg_l1d_0p8>; vdda-pll-supply = <&vreg_l2j_1p2>;
status = "okay";
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Abel Vesa abel.vesa@linaro.org
commit 87042003f6ea7d075784db98da6903738a38f3cf upstream.
The actual PHY regulator is L1d instead of L3j, so fix it accordingly.
Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support") Signed-off-by: Abel Vesa abel.vesa@linaro.org Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Cc: stable@vger.kernel.org # 6.9 Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-2-ee17a9939ba5@lin... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -468,7 +468,7 @@ };
&pcie6a_phy { - vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-phy-supply = <&vreg_l1d_0p8>; vdda-pll-supply = <&vreg_l2j_1p2>;
status = "okay";
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Abel Vesa abel.vesa@linaro.org
commit ae5cee8e7349d7e5deff4cf90a08cbd738287155 upstream.
The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J. Also add the missing supplies to QMP PHYs.
Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Signed-off-by: Abel Vesa abel.vesa@linaro.org Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Cc: stable@vger.kernel.org # 6.9 Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-1-6e... Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -824,12 +824,15 @@
&usb_1_ss0_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>;
status = "okay"; };
&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + status = "okay"; };
@@ -844,12 +847,15 @@
&usb_1_ss1_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>;
status = "okay"; };
&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; };
@@ -864,12 +870,15 @@
&usb_1_ss2_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>;
status = "okay"; };
&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; };
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit 44ea1ae3cf95db97e10d6ce17527948121f1dd4b upstream.
For Gen-1 targets like MSM8996, it is seen that stressing out the controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for MSM8996 to mitigate this issue.
Cc: stable@vger.kernel.org Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240704152848.3380602-8-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -3061,6 +3061,7 @@ snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; snps,is-utmi-l1-suspend; + snps,parkmode-disable-ss-quirk; tx-fifo-resize; }; };
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit c5d57eb7d06df16c07037cea5dacfd74d49d1833 upstream.
For Gen-1 targets like SM6350, it is seen that stressing out the controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SM6350 to mitigate this issue.
Cc: stable@vger.kernel.org Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240704152848.3380602-7-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1859,6 +1859,7 @@ snps,dis_enblslpm_quirk; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; };
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit 0046325ae52079b46da13a7f84dd7b2a6f7c38f8 upstream.
For Gen-1 targets like MSM8998, it is seen that stressing out the controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for MSM8998 to mitigate this issue.
Cc: stable@vger.kernel.org Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240704152848.3380602-4-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -2154,6 +2154,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&qusb2phy>, <&usb3phy>; phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum;
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit 4ae4837871ee8c8b055cf8131f65d31ee4208fa0 upstream.
For Gen-1 targets like IPQ6018, it is seen that stressing out the controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for IPQ6018 to mitigate this issue.
Cc: stable@vger.kernel.org Fixes: 20bb9e3dd2e4 ("arm64: dts: qcom: ipq6018: add usb3 DT description") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240704152848.3380602-2-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -685,6 +685,7 @@ clocks = <&xo>; clock-names = "ref"; tx-fifo-resize; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk;
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit fad58a41b84667cb6c9232371fc3af77d4443889 upstream.
For Gen-1 targets like SDM630, it is seen that stressing out the controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SDM630 to mitigate this issue.
Cc: stable@vger.kernel.org Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240704152848.3380602-5-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1302,6 +1302,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk;
phys = <&qusb2phy0>, <&usb3_qmpphy>; phy-names = "usb2-phy", "usb3-phy";
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit dc6ba95c6c4400a84cca5b419b34ae852a08cfb5 upstream.
For Gen-1 targets like IPQ8074, it is seen that stressing out the controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.
Cc: stable@vger.kernel.org Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240704152848.3380602-3-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++ 1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -647,6 +647,7 @@ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -696,6 +697,7 @@ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_1>, <&ssphy_1>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk;
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit cf4d6d54eadb60d2ee4d31c9d92299f5e8dcb55c upstream.
For Gen-1 targets like SDM845, it is seen that stressing out the controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SDM845 to mitigate this issue.
Cc: stable@vger.kernel.org Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 ++ 1 file changed, 2 insertions(+)
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4086,6 +4086,7 @@ iommus = <&apps_smmu 0x740 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -4141,6 +4142,7 @@ iommus = <&apps_smmu 0x760 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; };
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit 074992a1163295d717faa21d1818c4c19ef6e676 upstream.
For Gen-1 targets like SM6115, it is seen that stressing out the controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SM6115 to mitigate this issue.
Cc: stable@vger.kernel.org Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org Link: https://lore.kernel.org/r/20240704152848.3380602-6-quic_kriskura@quicinc.com Signed-off-by: Bjorn Andersson andersson@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1656,6 +1656,7 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; + snps,parkmode-disable-ss-quirk;
usb-role-switch;
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shengjiu Wang shengjiu.wang@nxp.com
commit 88e98af9f4b5b0d60c1fe7f7f2701b5467691e75 upstream.
When suspended, the DMA channel may enter PAUSE state if dmaengine_pause() is supported by DMA. At this state, dmaengine_synchronize() should not be called, otherwise the DMA channel can't be resumed successfully.
Fixes: e8343410ddf0 ("ALSA: dmaengine: Synchronize dma channel after drop()") Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Cc: stable@vger.kernel.org Link: https://patch.msgid.link/1721198693-27636-1-git-send-email-shengjiu.wang@nxp... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/pcm_dmaengine.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/sound/core/pcm_dmaengine.c +++ b/sound/core/pcm_dmaengine.c @@ -352,8 +352,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream) { struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + struct dma_tx_state state; + enum dma_status status;
- dmaengine_synchronize(prtd->dma_chan); + status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state); + if (status != DMA_PAUSED) + dmaengine_synchronize(prtd->dma_chan);
return 0; }
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai tiwai@suse.de
commit 3bfd7c0ba184de99e9f5083b29e5308f30767265 upstream.
When the UMP Endpoint is configured with static blocks, the block configuration will never change, hence the unused ports will be unchanged as well. Creating sequencer ports for those unused ports is simply useless, and it might be rather confusing for users. The idea behind the inactive ports was for allowing connections from/to ports that can become usable later, but this will never happen for inactive groups in static blocks.
Let's change the sequencer UMP binding to skip those unused ports when the UMP EP is with static blocks.
Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240717083322.25892-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/core/seq/seq_ump_client.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
--- a/sound/core/seq/seq_ump_client.c +++ b/sound/core/seq/seq_ump_client.c @@ -28,6 +28,7 @@ struct seq_ump_group { int group; /* group index (0-based) */ unsigned int dir_bits; /* directions */ bool active; /* activeness */ + bool valid; /* valid group (referred by blocks) */ char name[64]; /* seq port name */ };
@@ -210,6 +211,13 @@ static void fill_port_info(struct snd_se sprintf(port->name, "Group %d", group->group + 1); }
+/* skip non-existing group for static blocks */ +static bool skip_group(struct seq_ump_client *client, struct seq_ump_group *group) +{ + return !group->valid && + (client->ump->info.flags & SNDRV_UMP_EP_INFO_STATIC_BLOCKS); +} + /* create a new sequencer port per UMP group */ static int seq_ump_group_init(struct seq_ump_client *client, int group_index) { @@ -217,6 +225,9 @@ static int seq_ump_group_init(struct seq struct snd_seq_port_info *port __free(kfree) = NULL; struct snd_seq_port_callback pcallbacks;
+ if (skip_group(client, group)) + return 0; + port = kzalloc(sizeof(*port), GFP_KERNEL); if (!port) return -ENOMEM; @@ -250,6 +261,9 @@ static void update_port_infos(struct seq return;
for (i = 0; i < SNDRV_UMP_MAX_GROUPS; i++) { + if (skip_group(client, &client->groups[i])) + continue; + old->addr.client = client->seq_client; old->addr.port = i; err = snd_seq_kernel_client_ctl(client->seq_client, @@ -284,6 +298,7 @@ static void update_group_attrs(struct se group->dir_bits = 0; group->active = 0; group->group = i; + group->valid = false; }
list_for_each_entry(fb, &client->ump->block_list, list) { @@ -291,6 +306,7 @@ static void update_group_attrs(struct se break; group = &client->groups[fb->info.first_group]; for (i = 0; i < fb->info.num_groups; i++, group++) { + group->valid = true; if (fb->info.active) group->active = 1; switch (fb->info.direction) {
6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jann Horn jannh@google.com
commit f8138f2ad2f745b9a1c696a05b749eabe44337ea upstream.
When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when fcntl/close race is detected"), I missed that there are two copies of the code I was patching: The normal version, and the version for 64-bit offsets on 32-bit kernels. Thanks to Greg KH for stumbling over this while doing the stable backport...
Apply exactly the same fix to the compat path for 32-bit kernels.
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling") Cc: stable@kernel.org Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563 Signed-off-by: Jann Horn jannh@google.com Link: https://lore.kernel.org/r/20240723-fs-lock-recover-compatfix-v1-1-1480967195... Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/locks.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
--- a/fs/locks.c +++ b/fs/locks.c @@ -2570,8 +2570,9 @@ int fcntl_setlk64(unsigned int fd, struc error = do_lock_file_wait(filp, cmd, file_lock);
/* - * Attempt to detect a close/fcntl race and recover by releasing the - * lock that was just acquired. There is no need to do that when we're + * Detect close/fcntl races and recover by zapping all POSIX locks + * associated with this file and our files_struct, just like on + * filp_flush(). There is no need to do that when we're * unlocking though, or for OFD locks. */ if (!error && file_lock->c.flc_type != F_UNLCK && @@ -2586,9 +2587,7 @@ int fcntl_setlk64(unsigned int fd, struc f = files_lookup_fd_locked(files, fd); spin_unlock(&files->file_lock); if (f != filp) { - file_lock->c.flc_type = F_UNLCK; - error = do_lock_file_wait(filp, cmd, file_lock); - WARN_ON_ONCE(error); + locks_remove_posix(filp, files); error = -EBADF; } }
On Thu, Jul 25, 2024 at 04:37:10PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.9.12-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.9.y and the diffstat can be found below.
thanks,
greg k-h
Tested rc1 against the Fedora build system (aarch64, ppc64le, s390x, x86_64), and boot tested x86_64. No regressions noted.
Tested-by: Justin M. Forbes jforbes@fedoraproject.org
Am 25.07.2024 um 16:37 schrieb Greg Kroah-Hartman:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.
Tested-by: Peter Schneider pschneider1968@googlemail.com
Beste Grüße, Peter Schneider
Hello,
On Thu, 25 Jul 2024 16:37:10 +0200 Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.9.12-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.9.y and the diffstat can be found below.
This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].
Tested-by: SeongJae Park sj@kernel.org
[1] https://github.com/awslabs/damon-tests/tree/next/corr [2] 692f6ed6607e ("Linux 6.9.12-rc1")
Thanks, SJ
[...]
---
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh ok 7 selftests: damon: debugfs_rm_non_contexts.sh ok 8 selftests: damon: debugfs_target_ids_read_before_terminate_race.sh ok 9 selftests: damon: debugfs_target_ids_pid_leak.sh ok 10 selftests: damon: sysfs.sh ok 11 selftests: damon: sysfs_update_removed_scheme_dir.sh ok 12 selftests: damon: sysfs_update_schemes_tried_regions_hang.py ok 13 selftests: damon: sysfs_update_schemes_tried_regions_wss_estimation.py ok 14 selftests: damon: damos_quota.py ok 15 selftests: damon: damos_apply_interval.py ok 16 selftests: damon: reclaim.sh ok 17 selftests: damon: lru_sort.sh ok 1 selftests: damon-tests: kunit.sh ok 2 selftests: damon-tests: huge_count_read_write.sh ok 3 selftests: damon-tests: buffer_overflow.sh ok 4 selftests: damon-tests: rm_contexts.sh ok 5 selftests: damon-tests: record_null_deref.sh ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh ok 8 selftests: damon-tests: damo_tests.sh ok 9 selftests: damon-tests: masim-record.sh ok 10 selftests: damon-tests: build_i386.sh ok 11 selftests: damon-tests: build_arm64.sh ok 12 selftests: damon-tests: build_m68k.sh ok 13 selftests: damon-tests: build_i386_idle_flag.sh ok 14 selftests: damon-tests: build_i386_highpte.sh ok 15 selftests: damon-tests: build_nomemcg.sh [33m [92mPASS [39m
* Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
Hi Greg
6.9.12-rc1 compiles, boots and runs here on x86_64 (AMD Ryzen 5 PRO 4650G, Slackware64-15.0)
Tested-by: Markus Reichelt lkt+2023@mareichelt.com
On 7/25/24 7:37 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.9.12-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.9.y and the diffstat can be found below.
thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos re@w6rz.net
On Thu, Jul 25, 2024 at 04:37:10PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Tested-by: Mark Brown broonie@kernel.org
On 7/25/24 08:37, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.9.12-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.9.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan skhan@linuxfoundation.org
thanks, -- Shuah
On Thu, 25 Jul 2024 16:37:10 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.9.12-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.9.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v6.9: 10 builds: 10 pass, 0 fail 26 boots: 26 pass, 0 fail 116 tests: 116 pass, 0 fail
Linux version: 6.9.12-rc1-g692f6ed6607e Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
On Thu, 25 Jul 2024 at 20:17, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.9.12-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.9.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
## Build * kernel: 6.9.12-rc1 * git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git * git commit: 692f6ed6607e027dbe476c8301112605c72385b2 * git describe: v6.9.11-30-g692f6ed6607e * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.9.y/build/v6.9.11...
## Test Regressions (compared to v6.9.10-164-gebb35f61e5d3)
## Metric Regressions (compared to v6.9.10-164-gebb35f61e5d3)
## Test Fixes (compared to v6.9.10-164-gebb35f61e5d3)
## Metric Fixes (compared to v6.9.10-164-gebb35f61e5d3)
## Test result summary total: 253976, pass: 218579, fail: 5284, skip: 29585, xfail: 528
## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 127 total, 127 passed, 0 failed * arm64: 36 total, 36 passed, 0 failed * i386: 27 total, 27 passed, 0 failed * mips: 24 total, 24 passed, 0 failed * parisc: 3 total, 3 passed, 0 failed * powerpc: 34 total, 34 passed, 0 failed * riscv: 17 total, 17 passed, 0 failed * s390: 12 total, 12 passed, 0 failed * sh: 10 total, 10 passed, 0 failed * sparc: 6 total, 6 passed, 0 failed * x86_64: 31 total, 31 passed, 0 failed
## Test suites summary * boot * kselftest-arm64 * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-efivarfs * kselftest-exec * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-filesystems-epoll * kselftest-firmware * kselftest-fpu * kselftest-ftrace * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-kcmp * kselftest-kvm * kselftest-livepatch * kselftest-membarrier * kselftest-memfd * kselftest-mincore * kselftest-mqueue * kselftest-net * kselftest-net-mptcp * kselftest-openat2 * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-tc-testing * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user_events * kselftest-vDSO * kselftest-watchdog * kselftest-x86 * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-hugetlb * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-smoke * ltp-smoketest * ltp-syscalls * ltp-tracing * perf * rcutorture
-- Linaro LKFT https://lkft.linaro.org
On 7/25/24 07:37, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.9.12 release. There are 29 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.9.12-rc1.... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.9.y and the diffstat can be found below.
thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Tested-by: Florian Fainelli florian.fainelli@broadcom.com
linux-stable-mirror@lists.linaro.org
-
Florian Fainelli -
Greg Kroah-Hartman -
Jon Hunter -
Justin Forbes -
Mark Brown -
Markus Reichelt -
Naresh Kamboju -
Peter Schneider -
Ron Economos -
SeongJae Park -
Shuah Khan