From: Guodong Liu guodong.liu@mediatek.corp-partner.google.com
[ Upstream commit 2d5446da5acecf9c67db1c9d55ae2c3e5de01f8d ]
When eint virtual eint number is greater than gpio number, it maybe produce 'desc[eint_n]' size globle-out-of-bounds issue.
Signed-off-by: Guodong Liu guodong.liu@mediatek.corp-partner.google.com Signed-off-by: Zhiyong Tao zhiyong.tao@mediatek.com Reviewed-by: Chen-Yu Tsai wenst@chromium.org Link: https://lore.kernel.org/r/20211110071900.4490-2-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c index 20e1c890e73b3..c3e6f3c1b4743 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c @@ -236,8 +236,12 @@ static int mtk_xt_get_gpio_n(void *data, unsigned long eint_n, desc = (const struct mtk_pin_desc *)hw->soc->pins; *gpio_chip = &hw->chip;
- /* Be greedy to guess first gpio_n is equal to eint_n */ - if (desc[eint_n].eint.eint_n == eint_n) + /* + * Be greedy to guess first gpio_n is equal to eint_n. + * Only eint virtual eint number is greater than gpio number. + */ + if (hw->soc->npins > eint_n && + desc[eint_n].eint.eint_n == eint_n) *gpio_n = eint_n; else *gpio_n = mtk_xt_find_eint_num(hw, eint_n);
From: Takashi Iwai tiwai@suse.de
[ Upstream commit 9222ba68c3f4065f6364b99cc641b6b019ef2d42 ]
We've got a bug report about the non-working keyboard on ASUS ZenBook UX425UA. It seems that the PS/2 device isn't ready immediately at boot but takes some seconds to get ready. Until now, the only workaround is to defer the probe, but it's available only when the driver is a module. However, many distros, including openSUSE as in the original report, build the PS/2 input drivers into kernel, hence it won't work easily.
This patch adds the support for the deferred probe for i8042 stuff as a workaround of the problem above. When the deferred probe mode is enabled and the device couldn't be probed, it'll be repeated with the standard deferred probe mechanism.
The deferred probe mode is enabled either via the new option i8042.probe_defer or via the quirk table entry. As of this patch, the quirk table contains only ASUS ZenBook UX425UA.
The deferred probe part is based on Fabio's initial work.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256 Signed-off-by: Takashi Iwai tiwai@suse.de Tested-by: Samuel Čavoj samuel@cavoj.net Link: https://lore.kernel.org/r/20211117063757.11380-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../admin-guide/kernel-parameters.txt | 2 + drivers/input/serio/i8042-x86ia64io.h | 14 +++++ drivers/input/serio/i8042.c | 54 ++++++++++++------- 3 files changed, 51 insertions(+), 19 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b11e1fd95ee5f..9d824117ff4ff 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1487,6 +1487,8 @@ architectures force reset to be always executed i8042.unlock [HW] Unlock (ignore) the keylock i8042.kbdreset [HW] Reset device connected to KBD port + i8042.probe_defer + [HW] Allow deferred probing upon i8042 probe errors
i810= [HW,DRM]
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 202e43a6ffae2..2bd33a28b97cc 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -995,6 +995,17 @@ static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = { { } };
+static const struct dmi_system_id i8042_dmi_probe_defer_table[] __initconst = { + { + /* ASUS ZenBook UX425UA */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425UA"), + }, + }, + { } +}; + #endif /* CONFIG_X86 */
#ifdef CONFIG_PNP @@ -1314,6 +1325,9 @@ static int __init i8042_platform_init(void) if (dmi_check_system(i8042_dmi_kbdreset_table)) i8042_kbdreset = true;
+ if (dmi_check_system(i8042_dmi_probe_defer_table)) + i8042_probe_defer = true; + /* * A20 was already enabled during early kernel init. But some buggy * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 6ff6b5710dd4e..bb76ff2f6b1d8 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -44,6 +44,10 @@ static bool i8042_unlock; module_param_named(unlock, i8042_unlock, bool, 0); MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
+static bool i8042_probe_defer; +module_param_named(probe_defer, i8042_probe_defer, bool, 0); +MODULE_PARM_DESC(probe_defer, "Allow deferred probing."); + enum i8042_controller_reset_mode { I8042_RESET_NEVER, I8042_RESET_ALWAYS, @@ -709,7 +713,7 @@ static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version) * LCS/Telegraphics. */
-static int __init i8042_check_mux(void) +static int i8042_check_mux(void) { unsigned char mux_version;
@@ -738,10 +742,10 @@ static int __init i8042_check_mux(void) /* * The following is used to test AUX IRQ delivery. */ -static struct completion i8042_aux_irq_delivered __initdata; -static bool i8042_irq_being_tested __initdata; +static struct completion i8042_aux_irq_delivered; +static bool i8042_irq_being_tested;
-static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id) +static irqreturn_t i8042_aux_test_irq(int irq, void *dev_id) { unsigned long flags; unsigned char str, data; @@ -768,7 +772,7 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id) * verifies success by readinng CTR. Used when testing for presence of AUX * port. */ -static int __init i8042_toggle_aux(bool on) +static int i8042_toggle_aux(bool on) { unsigned char param; int i; @@ -796,7 +800,7 @@ static int __init i8042_toggle_aux(bool on) * the presence of an AUX interface. */
-static int __init i8042_check_aux(void) +static int i8042_check_aux(void) { int retval = -1; bool irq_registered = false; @@ -1003,7 +1007,7 @@ static int i8042_controller_init(void)
if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) { pr_err("Can't read CTR while initializing i8042\n"); - return -EIO; + return i8042_probe_defer ? -EPROBE_DEFER : -EIO; }
} while (n < 2 || ctr[0] != ctr[1]); @@ -1318,7 +1322,7 @@ static void i8042_shutdown(struct platform_device *dev) i8042_controller_reset(false); }
-static int __init i8042_create_kbd_port(void) +static int i8042_create_kbd_port(void) { struct serio *serio; struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO]; @@ -1346,7 +1350,7 @@ static int __init i8042_create_kbd_port(void) return 0; }
-static int __init i8042_create_aux_port(int idx) +static int i8042_create_aux_port(int idx) { struct serio *serio; int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx; @@ -1383,13 +1387,13 @@ static int __init i8042_create_aux_port(int idx) return 0; }
-static void __init i8042_free_kbd_port(void) +static void i8042_free_kbd_port(void) { kfree(i8042_ports[I8042_KBD_PORT_NO].serio); i8042_ports[I8042_KBD_PORT_NO].serio = NULL; }
-static void __init i8042_free_aux_ports(void) +static void i8042_free_aux_ports(void) { int i;
@@ -1399,7 +1403,7 @@ static void __init i8042_free_aux_ports(void) } }
-static void __init i8042_register_ports(void) +static void i8042_register_ports(void) { int i;
@@ -1440,7 +1444,7 @@ static void i8042_free_irqs(void) i8042_aux_irq_registered = i8042_kbd_irq_registered = false; }
-static int __init i8042_setup_aux(void) +static int i8042_setup_aux(void) { int (*aux_enable)(void); int error; @@ -1482,7 +1486,7 @@ static int __init i8042_setup_aux(void) return error; }
-static int __init i8042_setup_kbd(void) +static int i8042_setup_kbd(void) { int error;
@@ -1532,7 +1536,7 @@ static int i8042_kbd_bind_notifier(struct notifier_block *nb, return 0; }
-static int __init i8042_probe(struct platform_device *dev) +static int i8042_probe(struct platform_device *dev) { int error;
@@ -1597,6 +1601,7 @@ static struct platform_driver i8042_driver = { .pm = &i8042_pm_ops, #endif }, + .probe = i8042_probe, .remove = i8042_remove, .shutdown = i8042_shutdown, }; @@ -1607,7 +1612,6 @@ static struct notifier_block i8042_kbd_bind_notifier_block = {
static int __init i8042_init(void) { - struct platform_device *pdev; int err;
dbg_init(); @@ -1623,17 +1627,29 @@ static int __init i8042_init(void) /* Set this before creating the dev to allow i8042_command to work right away */ i8042_present = true;
- pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, NULL, 0); - if (IS_ERR(pdev)) { - err = PTR_ERR(pdev); + err = platform_driver_register(&i8042_driver); + if (err) goto err_platform_exit; + + i8042_platform_device = platform_device_alloc("i8042", -1); + if (!i8042_platform_device) { + err = -ENOMEM; + goto err_unregister_driver; }
+ err = platform_device_add(i8042_platform_device); + if (err) + goto err_free_device; + bus_register_notifier(&serio_bus, &i8042_kbd_bind_notifier_block); panic_blink = i8042_panic_blink;
return 0;
+err_free_device: + platform_device_put(i8042_platform_device); +err_unregister_driver: + platform_driver_unregister(&i8042_driver); err_platform_exit: i8042_platform_exit(); return err;
From: Samuel Čavoj samuel@cavoj.net
[ Upstream commit 44ee250aeeabb28b52a10397ac17ffb8bfe94839 ]
The ASUS UM325UA suffers from the same issue as the ASUS UX425UA, which is a very similar laptop. The i8042 device is not usable immediately after boot and fails to initialize, requiring a deferred retry.
Enable the deferred probe quirk for the UM325UA.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256 Signed-off-by: Samuel Čavoj samuel@cavoj.net Link: https://lore.kernel.org/r/20211204015615.232948-1-samuel@cavoj.net Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 2bd33a28b97cc..0282c4c55e9da 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -1003,6 +1003,13 @@ static const struct dmi_system_id i8042_dmi_probe_defer_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425UA"), }, }, + { + /* ASUS ZenBook UM325UA */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"), + }, + }, { } };
From: Guenter Roeck linux@roeck-us.net
[ Upstream commit cdc5287acad9ede121924a9c9313544b80d15842 ]
Bit 7 of the status register indicates that the chip is busy doing a conversion. It does not indicate an alarm status. Stop reporting it as alarm status bit.
Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/lm90.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 9b3c9f390ef81..c2a7fe6827915 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -184,6 +184,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_STATUS_RHIGH (1 << 4) /* remote high temp limit tripped */ #define LM90_STATUS_LLOW (1 << 5) /* local low temp limit tripped */ #define LM90_STATUS_LHIGH (1 << 6) /* local high temp limit tripped */ +#define LM90_STATUS_BUSY (1 << 7) /* conversion is ongoing */
#define MAX6696_STATUS2_R2THRM (1 << 1) /* remote2 THERM limit tripped */ #define MAX6696_STATUS2_R2OPEN (1 << 2) /* remote2 is an open circuit */ @@ -773,7 +774,7 @@ static int lm90_update_device(struct device *dev) val = lm90_read_reg(client, LM90_REG_R_STATUS); if (val < 0) return val; - data->alarms = val; /* lower 8 bit of alarms */ + data->alarms = val & ~LM90_STATUS_BUSY;
if (data->kind == max6696) { val = lm90_select_remote_channel(data, 1);
From: Dmitry Vyukov dvyukov@google.com
[ Upstream commit 04e57a2d952bbd34bc45744e72be3eecdc344294 ]
If tomoyo is used in a testing/fuzzing environment in learning mode, for lots of domains the quota will be exceeded and stay exceeded for prolonged periods of time. In such cases it's pointless (and slow) to walk the whole acl list again and again just to rediscover that the quota is exceeded. We already have the TOMOYO_DIF_QUOTA_WARNED flag that notes the overflow condition. Check it early to avoid the slowdown.
[penguin-kernel] This patch causes a user visible change that the learning mode will not be automatically resumed after the quota is increased. To resume the learning mode, administrator will need to explicitly clear TOMOYO_DIF_QUOTA_WARNED flag after increasing the quota. But I think that this change is generally preferable, for administrator likely wants to optimize the acl list for that domain before increasing the quota, or that domain likely hits the quota again. Therefore, don't try to care to clear TOMOYO_DIF_QUOTA_WARNED flag automatically when the quota for that domain changed.
Signed-off-by: Dmitry Vyukov dvyukov@google.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Sasha Levin sashal@kernel.org --- security/tomoyo/util.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/security/tomoyo/util.c b/security/tomoyo/util.c index eba0b3395851e..861fc6f4ebfb7 100644 --- a/security/tomoyo/util.c +++ b/security/tomoyo/util.c @@ -1029,6 +1029,8 @@ bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r) return false; if (!domain) return true; + if (READ_ONCE(domain->flags[TOMOYO_DIF_QUOTA_WARNED])) + return false; list_for_each_entry_rcu(ptr, &domain->acl_info_list, list, srcu_read_lock_held(&tomoyo_ss)) { u16 perm; @@ -1074,14 +1076,12 @@ bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r) if (count < tomoyo_profile(domain->ns, domain->profile)-> pref[TOMOYO_PREF_MAX_LEARNING_ENTRY]) return true; - if (!domain->flags[TOMOYO_DIF_QUOTA_WARNED]) { - domain->flags[TOMOYO_DIF_QUOTA_WARNED] = true; - /* r->granted = false; */ - tomoyo_write_log(r, "%s", tomoyo_dif[TOMOYO_DIF_QUOTA_WARNED]); + WRITE_ONCE(domain->flags[TOMOYO_DIF_QUOTA_WARNED], true); + /* r->granted = false; */ + tomoyo_write_log(r, "%s", tomoyo_dif[TOMOYO_DIF_QUOTA_WARNED]); #ifndef CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING - pr_warn("WARNING: Domain '%s' has too many ACLs to hold. Stopped learning mode.\n", - domain->domainname->name); + pr_warn("WARNING: Domain '%s' has too many ACLs to hold. Stopped learning mode.\n", + domain->domainname->name); #endif - } return false; }
From: Lin Ma linma@zju.edu.cn
[ Upstream commit 1ade48d0c27d5da1ccf4b583d8c5fc8b534a3ac8 ]
The existing cleanup routine implementation is not well synchronized with the syscall routine. When a device is detaching, below race could occur.
static int ax25_sendmsg(...) { ... lock_sock() ax25 = sk_to_ax25(sk); if (ax25->ax25_dev == NULL) // CHECK ... ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE ... }
static void ax25_kill_by_device(...) { ... if (s->ax25_dev == ax25_dev) { s->ax25_dev = NULL; ... }
Other syscall functions like ax25_getsockopt, ax25_getname, ax25_info_show also suffer from similar races. To fix them, this patch introduce lock_sock() into ax25_kill_by_device in order to guarantee that the nullify action in cleanup routine cannot proceed when another socket request is pending.
Signed-off-by: Hanjie Wu nagi@zju.edu.cn Signed-off-by: Lin Ma linma@zju.edu.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ax25/af_ax25.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c index 2fdb1b573e8c8..1f84d41e22c36 100644 --- a/net/ax25/af_ax25.c +++ b/net/ax25/af_ax25.c @@ -85,8 +85,10 @@ static void ax25_kill_by_device(struct net_device *dev) again: ax25_for_each(s, &ax25_list) { if (s->ax25_dev == ax25_dev) { - s->ax25_dev = NULL; spin_unlock_bh(&ax25_list_lock); + lock_sock(s->sk); + s->ax25_dev = NULL; + release_sock(s->sk); ax25_disconnect(s, ENETUNREACH); spin_lock_bh(&ax25_list_lock);
From: Rémi Denis-Courmont remi@remlab.net
[ Upstream commit 75a2f31520095600f650597c0ac41f48b5ba0068 ]
This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur:
1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object.
Reported-by: syzbot+2dc91e7fc3dea88b1e8a@syzkaller.appspotmail.com Signed-off-by: Rémi Denis-Courmont remi@remlab.net Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/phonet/pep.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/phonet/pep.c b/net/phonet/pep.c index 4577e43cb7778..a07e13f63332c 100644 --- a/net/phonet/pep.c +++ b/net/phonet/pep.c @@ -946,6 +946,8 @@ static int pep_ioctl(struct sock *sk, int cmd, unsigned long arg) ret = -EBUSY; else if (sk->sk_state == TCP_ESTABLISHED) ret = -EISCONN; + else if (!pn->pn_sk.sobject) + ret = -EADDRNOTAVAIL; else ret = pep_sock_enable(sk, NULL, 0); release_sock(sk);
From: Wang Qing wangqing@vivo.com
[ Upstream commit eb66fb03a727cde0ab9b1a3858de55c26f3007da ]
This should be (res->end - res->start + 1) here actually, use resource_size() derectly.
Signed-off-by: Wang Qing wangqing@vivo.com Link: https://lore.kernel.org/r/1639484316-75873-1-git-send-email-wangqing@vivo.co... Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/apple-gmux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 7e3083deb1c5d..1b86005c0f5f4 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -625,7 +625,7 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) }
gmux_data->iostart = res->start; - gmux_data->iolen = res->end - res->start; + gmux_data->iolen = resource_size(res);
if (gmux_data->iolen < GMUX_MIN_IO_LEN) { pr_err("gmux I/O region too small (%lu < %u)\n",
From: Jackie Liu liuyun01@kylinos.cn
[ Upstream commit d7f55471db2719629f773c2d6b5742a69595bfd3 ]
Fix modpost Section mismatch error in memblock_phys_alloc()
[...] WARNING: modpost: vmlinux.o(.text.unlikely+0x1dcc): Section mismatch in reference from the function memblock_phys_alloc() to the function .init.text:memblock_phys_alloc_range() The function memblock_phys_alloc() references the function __init memblock_phys_alloc_range(). This is often because memblock_phys_alloc lacks a __init annotation or the annotation of memblock_phys_alloc_range is wrong.
ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. [...]
memblock_phys_alloc() is a one-line wrapper, make it __always_inline to avoid these section mismatches.
Reported-by: k2ci kernel-bot@kylinos.cn Suggested-by: Mike Rapoport rppt@kernel.org Signed-off-by: Jackie Liu liuyun01@kylinos.cn [rppt: slightly massaged changelog ] Signed-off-by: Mike Rapoport rppt@linux.ibm.com Link: https://lore.kernel.org/r/20211217020754.2874872-1-liu.yun@linux.dev Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/memblock.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/linux/memblock.h b/include/linux/memblock.h index f491690d54c6c..64b971b2542d6 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -351,8 +351,8 @@ phys_addr_t memblock_phys_alloc_range(phys_addr_t size, phys_addr_t align, phys_addr_t start, phys_addr_t end); phys_addr_t memblock_phys_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid);
-static inline phys_addr_t memblock_phys_alloc(phys_addr_t size, - phys_addr_t align) +static __always_inline phys_addr_t memblock_phys_alloc(phys_addr_t size, + phys_addr_t align) { return memblock_phys_alloc_range(size, align, 0, MEMBLOCK_ALLOC_ACCESSIBLE);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin