On 09/08/2023 23:29, Luke Lu wrote:

Device connected to usb otg port of GXL-based boards can not be recognised after resumption, doesn't recover even if disconnect and reconnect the device. dmesg shows it disconnects during resumption.

[ 41.492911] usb 1-2: USB disconnect, device number 3 [ 41.499346] usb 1-2: unregistering device [ 41.511939] usb 1-2: unregistering interface 1-2:1.0

Calling usb_post_init() will fix this issue, and it's tested and verified on libretech's aml-s905x-cc board.

Cc: stable@vger.kernel.org # v5.8+ Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Signed-off-by: Luke Lu luke.lu@libre.computer

---

Note here, the commmit of Fixes tag is the first patch which bring suspend/resume function, so let's use it as the fix tag.

As commit 5b0ba0caaf3a: (usb: dwc3: meson-g12a: refactor usb init)" introduced the use_post_init() function, and this patch will explicitly depend on it, so let's set kernel version higher or equal to v5.8.

Changes since v1:

• add Fixes tag and Cc stable tree

---

drivers/usb/dwc3/dwc3-meson-g12a.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index e99c7489dba0..2c07c038b584 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -926,6 +926,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev) return ret; }

• if (priv->drvdata->usb_post_init) {

• ret = priv->drvdata->usb_post_init(priv);
  

• if (ret)
  

• 	return ret;
  

• }
• return 0; }

Acked-by: Neil Armstrong neil.armstrong@linaro.org