The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise=" modes - log, fix, enforce - at run time, but not when IMA architecture specific policies are enabled. This prevents properly labeling the filesystem on systems where secure boot is supported, but not enabled on the platform. Only when secure boot is actually enabled should these IMA appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
-> powerpc with secure boot disabled
[ 0.000000] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.000000] Secure boot mode disabled
-> Running the system without secure boot and with both options set:
CONFIG_IMA_APPRAISE_BOOTPARAM=y CONFIG_IMA_ARCH_POLICY=y
Audit prompts "missing-hash" but still allow execution and, consequently, filesystem labeling:
type=INTEGRITY_DATA msg=audit(07/09/2020 12:30:27.778:1691) : pid=4976 uid=root auid=root ses=2 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 op=appraise_data cause=missing-hash comm=bash name=/usr/bin/evmctl dev="dm-0" ino=493150 res=no
Cc: stable@vger.kernel.org Fixes: d958083a8f64 ("x86/ima: define arch_get_ima_policy() for x86") Signed-off-by: Bruno Meneguele bmeneg@redhat.com --- v6: - explictly print the bootparam being ignored to the user (Mimi) v5: - add pr_info() to inform user the ima_appraise= boot param is being ignored due to secure boot enabled (Nayna) - add some testing results to commit log v4: - instead of change arch_policy loading code, check secure boot state at "ima_appraise=" parameter handler (Mimi) v3: - extend secure boot arch checker to also consider trusted boot - enforce IMA appraisal when secure boot is effectively enabled (Nayna) - fix ima_appraise flag assignment by or'ing it (Mimi) v2: - pr_info() message prefix correction security/integrity/ima/Kconfig | 2 +- security/integrity/ima/ima_appraise.c | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig index edde88dbe576..62dc11a5af01 100644 --- a/security/integrity/ima/Kconfig +++ b/security/integrity/ima/Kconfig @@ -232,7 +232,7 @@ config IMA_APPRAISE_REQUIRE_POLICY_SIGS
config IMA_APPRAISE_BOOTPARAM bool "ima_appraise boot parameter" - depends on IMA_APPRAISE && !IMA_ARCH_POLICY + depends on IMA_APPRAISE default y help This option enables the different "ima_appraise=" modes diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c index a9649b04b9f1..28a59508c6bd 100644 --- a/security/integrity/ima/ima_appraise.c +++ b/security/integrity/ima/ima_appraise.c @@ -19,6 +19,12 @@ static int __init default_appraise_setup(char *str) { #ifdef CONFIG_IMA_APPRAISE_BOOTPARAM + if (arch_ima_get_secureboot()) { + pr_info("Secure boot enabled: ignoring ima_appraise=%s boot parameter option", + str); + return 1; + } + if (strncmp(str, "off", 3) == 0) ima_appraise = 0; else if (strncmp(str, "log", 3) == 0)
On Mon, Jul 13, 2020 at 01:48:30PM -0300, Bruno Meneguele wrote:
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise=" modes - log, fix, enforce - at run time, but not when IMA architecture specific policies are enabled. This prevents properly labeling the filesystem on systems where secure boot is supported, but not enabled on the platform. Only when secure boot is actually enabled should these IMA appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
-> powerpc with secure boot disabled
[ 0.000000] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.000000] Secure boot mode disabled
-> Running the system without secure boot and with both options set:
CONFIG_IMA_APPRAISE_BOOTPARAM=y CONFIG_IMA_ARCH_POLICY=y
Audit prompts "missing-hash" but still allow execution and, consequently, filesystem labeling:
type=INTEGRITY_DATA msg=audit(07/09/2020 12:30:27.778:1691) : pid=4976 uid=root auid=root ses=2 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 op=appraise_data cause=missing-hash comm=bash name=/usr/bin/evmctl dev="dm-0" ino=493150 res=no
Cc: stable@vger.kernel.org Fixes: d958083a8f64 ("x86/ima: define arch_get_ima_policy() for x86") Signed-off-by: Bruno Meneguele bmeneg@redhat.com
v6:
- explictly print the bootparam being ignored to the user (Mimi)
v5:
- add pr_info() to inform user the ima_appraise= boot param is being
ignored due to secure boot enabled (Nayna)
- add some testing results to commit log
v4:
- instead of change arch_policy loading code, check secure boot state at
"ima_appraise=" parameter handler (Mimi) v3:
- extend secure boot arch checker to also consider trusted boot
- enforce IMA appraisal when secure boot is effectively enabled (Nayna)
- fix ima_appraise flag assignment by or'ing it (Mimi)
v2:
- pr_info() message prefix correction
security/integrity/ima/Kconfig | 2 +- security/integrity/ima/ima_appraise.c | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig index edde88dbe576..62dc11a5af01 100644 --- a/security/integrity/ima/Kconfig +++ b/security/integrity/ima/Kconfig @@ -232,7 +232,7 @@ config IMA_APPRAISE_REQUIRE_POLICY_SIGS config IMA_APPRAISE_BOOTPARAM bool "ima_appraise boot parameter"
- depends on IMA_APPRAISE && !IMA_ARCH_POLICY
- depends on IMA_APPRAISE default y help This option enables the different "ima_appraise=" modes
diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c index a9649b04b9f1..28a59508c6bd 100644 --- a/security/integrity/ima/ima_appraise.c +++ b/security/integrity/ima/ima_appraise.c @@ -19,6 +19,12 @@ static int __init default_appraise_setup(char *str) { #ifdef CONFIG_IMA_APPRAISE_BOOTPARAM
- if (arch_ima_get_secureboot()) {
pr_info("Secure boot enabled: ignoring ima_appraise=%s boot parameter option",str);return 1;- }
- if (strncmp(str, "off", 3) == 0) ima_appraise = 0; else if (strncmp(str, "log", 3) == 0)
-- 2.26.2
Ping for review.
Many thanks.
On 7/13/20 12:48 PM, Bruno Meneguele wrote:
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise=" modes - log, fix, enforce - at run time, but not when IMA architecture specific policies are enabled. This prevents properly labeling the filesystem on systems where secure boot is supported, but not enabled on the platform. Only when secure boot is actually enabled should these IMA appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
-> powerpc with secure boot disabled
[ 0.000000] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.000000] Secure boot mode disabled
-> Running the system without secure boot and with both options set:
CONFIG_IMA_APPRAISE_BOOTPARAM=y CONFIG_IMA_ARCH_POLICY=y
Audit prompts "missing-hash" but still allow execution and, consequently, filesystem labeling:
type=INTEGRITY_DATA msg=audit(07/09/2020 12:30:27.778:1691) : pid=4976 uid=root auid=root ses=2 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 op=appraise_data cause=missing-hash comm=bash name=/usr/bin/evmctl dev="dm-0" ino=493150 res=no
Cc: stable@vger.kernel.org Fixes: d958083a8f64 ("x86/ima: define arch_get_ima_policy() for x86") Signed-off-by: Bruno Meneguele bmeneg@redhat.com
Reviewed-by: Nayna Jainnayna@linux.ibm.com
Tested-by: Nayna Jainnayna@linux.ibm.com
Thanks & Regards,
- Nayna
On Mon, 2020-07-20 at 10:40 -0400, Nayna wrote:
On 7/13/20 12:48 PM, Bruno Meneguele wrote:
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise=" modes - log, fix, enforce - at run time, but not when IMA architecture specific policies are enabled. This prevents properly labeling the filesystem on systems where secure boot is supported, but not enabled on the platform. Only when secure boot is actually enabled should these IMA appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
Is it common to have two colons in the same line? Is the colon being used as a delimiter when parsing the kernel logs? Should the second colon be replaced with a hyphen? (No need to repost. I'll fix it up.)
-> powerpc with secure boot disabled
[ 0.000000] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.000000] Secure boot mode disabled
-> Running the system without secure boot and with both options set:
CONFIG_IMA_APPRAISE_BOOTPARAM=y CONFIG_IMA_ARCH_POLICY=y
Audit prompts "missing-hash" but still allow execution and, consequently, filesystem labeling:
type=INTEGRITY_DATA msg=audit(07/09/2020 12:30:27.778:1691) : pid=4976 uid=root auid=root ses=2 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 op=appraise_data cause=missing-hash comm=bash name=/usr/bin/evmctl dev="dm-0" ino=493150 res=no
Cc: stable@vger.kernel.org Fixes: d958083a8f64 ("x86/ima: define arch_get_ima_policy() for x86") Signed-off-by: Bruno Meneguele bmeneg@redhat.com
Reviewed-by: Nayna Jainnayna@linux.ibm.com Tested-by: Nayna Jainnayna@linux.ibm.com
Thanks, Nayna.
Mimi
On Mon, Jul 20, 2020 at 10:56:55AM -0400, Mimi Zohar wrote:
On Mon, 2020-07-20 at 10:40 -0400, Nayna wrote:
On 7/13/20 12:48 PM, Bruno Meneguele wrote:
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise=" modes - log, fix, enforce - at run time, but not when IMA architecture specific policies are enabled. This prevents properly labeling the filesystem on systems where secure boot is supported, but not enabled on the platform. Only when secure boot is actually enabled should these IMA appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
Is it common to have two colons in the same line? Is the colon being used as a delimiter when parsing the kernel logs? Should the second colon be replaced with a hyphen? (No need to repost. I'll fix it up.)
AFAICS it has been used without any limitations, e.g:
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns microcode: CPU0: patch_level=0x08701013 Lockdown: modprobe: unsigned module loading is restricted; see man kernel_lockdown.7 ...
I'd say we're fine using it.
-> powerpc with secure boot disabled
[ 0.000000] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.000000] Secure boot mode disabled
-> Running the system without secure boot and with both options set:
CONFIG_IMA_APPRAISE_BOOTPARAM=y CONFIG_IMA_ARCH_POLICY=y
Audit prompts "missing-hash" but still allow execution and, consequently, filesystem labeling:
type=INTEGRITY_DATA msg=audit(07/09/2020 12:30:27.778:1691) : pid=4976 uid=root auid=root ses=2 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 op=appraise_data cause=missing-hash comm=bash name=/usr/bin/evmctl dev="dm-0" ino=493150 res=no
Cc: stable@vger.kernel.org Fixes: d958083a8f64 ("x86/ima: define arch_get_ima_policy() for x86") Signed-off-by: Bruno Meneguele bmeneg@redhat.com
Reviewed-by: Nayna Jainnayna@linux.ibm.com Tested-by: Nayna Jainnayna@linux.ibm.com
Thanks, Nayna.
Mimi
On Mon, 2020-07-20 at 12:38 -0300, Bruno Meneguele wrote:
On Mon, Jul 20, 2020 at 10:56:55AM -0400, Mimi Zohar wrote:
On Mon, 2020-07-20 at 10:40 -0400, Nayna wrote:
On 7/13/20 12:48 PM, Bruno Meneguele wrote:
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise=" modes - log, fix, enforce - at run time, but not when IMA architecture specific policies are enabled. This prevents properly labeling the filesystem on systems where secure boot is supported, but not enabled on the platform. Only when secure boot is actually enabled should these IMA appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
Is it common to have two colons in the same line? Is the colon being used as a delimiter when parsing the kernel logs? Should the second colon be replaced with a hyphen? (No need to repost. I'll fix it up.)
AFAICS it has been used without any limitations, e.g:
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns microcode: CPU0: patch_level=0x08701013 Lockdown: modprobe: unsigned module loading is restricted; see man kernel_lockdown.7 ...
I'd say we're fine using it.
Ok. FYI, it's now in next-integrity.
Mimi
On Tue, Jul 21, 2020 at 01:26:16PM -0400, Mimi Zohar wrote:
On Mon, 2020-07-20 at 12:38 -0300, Bruno Meneguele wrote:
On Mon, Jul 20, 2020 at 10:56:55AM -0400, Mimi Zohar wrote:
On Mon, 2020-07-20 at 10:40 -0400, Nayna wrote:
On 7/13/20 12:48 PM, Bruno Meneguele wrote:
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise=" modes - log, fix, enforce - at run time, but not when IMA architecture specific policies are enabled. This prevents properly labeling the filesystem on systems where secure boot is supported, but not enabled on the platform. Only when secure boot is actually enabled should these IMA appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix [ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
Is it common to have two colons in the same line? Is the colon being used as a delimiter when parsing the kernel logs? Should the second colon be replaced with a hyphen? (No need to repost. I'll fix it up.)
AFAICS it has been used without any limitations, e.g:
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns microcode: CPU0: patch_level=0x08701013 Lockdown: modprobe: unsigned module loading is restricted; see man kernel_lockdown.7 ...
I'd say we're fine using it.
Ok. FYI, it's now in next-integrity.
Mimi
Thanks Mimi.
linux-stable-mirror@lists.linaro.org
-
Bruno Meneguele -
Mimi Zohar -
Nayna