From: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com

In the sh-sci driver, sci_ports[0] is used by earlycon. If the earlycon is still active when sci_probe() is called and the new serial port is supposed to map to sci_ports[0], return -EBUSY to prevent breaking the earlycon.

This situation should occurs in debug scenarios, and users should be aware of the potential conflict.

Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable@vger.kernel.org Signed-off-by: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com ---

Chances since RFT: - converted the earlycon member of struct sci_port to a local variable - added sp == &sci_ports[0] check in sci_probe() to be sure the code is checking against the sci_port used as earlycon - changed res->start != sp->port.mapbase condition to sp->port.mapbase != res->start to use the same pattern as used in patch 4/5

drivers/tty/serial/sh-sci.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 51382e354a2d..b85a9d425f7e 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -165,6 +165,7 @@ struct sci_port { static struct sci_port sci_ports[SCI_NPORTS]; static unsigned long sci_ports_in_use; static struct uart_driver sci_uart_driver; +static bool sci_uart_earlycon;

static inline struct sci_port * to_sci_port(struct uart_port *uart) @@ -3438,6 +3439,7 @@ static int sci_probe_single(struct platform_device *dev, static int sci_probe(struct platform_device *dev) { struct plat_sci_port *p; + struct resource *res; struct sci_port *sp; unsigned int dev_id; int ret; @@ -3467,6 +3469,26 @@ static int sci_probe(struct platform_device *dev) }

sp = &sci_ports[dev_id]; + + /* + * In case: + * - the probed port alias is zero (as the one used by earlycon), and + * - the earlycon is still active (e.g., "earlycon keep_bootcon" in + * bootargs) + * + * defer the probe of this serial. This is a debug scenario and the user + * must be aware of it. + * + * Except when the probed port is the same as the earlycon port. + */ + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + if (sci_uart_earlycon && sp == &sci_ports[0] && sp->port.mapbase != res->start) + return dev_err_probe(&dev->dev, -EBUSY, "sci_port[0] is used by earlycon!\n"); + platform_set_drvdata(dev, sp);

ret = sci_probe_single(dev, dev_id, p, sp); @@ -3563,6 +3585,7 @@ static int __init early_console_setup(struct earlycon_device *device, port_cfg.type = type; sci_ports[0].cfg = &port_cfg; sci_ports[0].params = sci_probe_regmap(&port_cfg); + sci_uart_earlycon = true; port_cfg.scscr = sci_serial_in(&sci_ports[0].port, SCSCR); sci_serial_out(&sci_ports[0].port, SCSCR, SCSCR_RE | SCSCR_TE | port_cfg.scscr);