From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 5d6fb560729a5d5554e23db8d00eb57cd0021083 ]
clang-9 points out that there are two variables that depending on the configuration may only be used in an ARRAY_SIZE() expression but not referenced:
drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs[] = { ^ drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs_chan[] = {
Mark these __maybe_unused to shut up the warning.
Signed-off-by: Arnd Bergmann arnd@arndb.de Reviewed-by: Nathan Chancellor natechancellor@gmail.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20190712091357.744515-1-arnd@arndb.de Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/ste_dma40.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index f4edfc56f34ef..3d55405c49cac 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -142,7 +142,7 @@ enum d40_events { * when the DMA hw is powered off. * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works. */ -static u32 d40_backup_regs[] = { +static __maybe_unused u32 d40_backup_regs[] = { D40_DREG_LCPA, D40_DREG_LCLA, D40_DREG_PRMSE, @@ -211,7 +211,7 @@ static u32 d40_backup_regs_v4b[] = {
#define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
-static u32 d40_backup_regs_chan[] = { +static __maybe_unused u32 d40_backup_regs_chan[] = { D40_CHAN_REG_SSCFG, D40_CHAN_REG_SSELT, D40_CHAN_REG_SSPTR,
From: Anthony Iliopoulos ailiopoulos@suse.com
[ Upstream commit fab7772bfbcfe8fb8e3e352a6a8fcaf044cded17 ]
When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated with the per-controller ns is run through revalidate_disk when a rescan is triggered, while the visible blockdev never gets its size (bdev->bd_inode->i_size) updated to reflect any capacity changes that may have occurred.
This prevents online resizing of nvme block devices and in extension of any filesystems atop that will are unable to expand while mounted, as userspace relies on the blockdev size for obtaining the disk capacity (via BLKGETSIZE/64 ioctls).
Fix this by explicitly revalidating the actual namespace gendisk in addition to the per-controller gendisk, when multipath is enabled.
Signed-off-by: Anthony Iliopoulos ailiopoulos@suse.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Johannes Thumshirn jthumshirn@suse.de Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e26d1191c5ad6..d838a300ae770 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1557,6 +1557,7 @@ static void __nvme_revalidate_disk(struct gendisk *disk, struct nvme_id_ns *id) if (ns->head->disk) { nvme_update_disk_info(ns->head->disk, ns, id); blk_queue_stack_limits(ns->head->disk->queue, ns->queue); + revalidate_disk(ns->head->disk); } #endif }
From: David Howells dhowells@redhat.com
[ Upstream commit 2067b2b3f4846402a040286135f98f46f8919939 ]
Fix the service handler function for the CB.ProbeUuid RPC call so that it replies in the correct manner - that is an empty reply for success and an abort of 1 for failure.
Putting 0 or 1 in an integer in the body of the reply should result in the fileserver throwing an RX_PROTOCOL_ERROR abort and discarding its record of the client; older servers, however, don't necessarily check that all the data got consumed, and so might incorrectly think that they got a positive response and associate the client with the wrong host record.
If the client is incorrectly associated, this will result in callbacks intended for a different client being delivered to this one and then, when the other client connects and responds positively, all of the callback promises meant for the client that issued the improper response will be lost and it won't receive any further change notifications.
Fixes: 9396d496d745 ("afs: support the CB.ProbeUuid RPC op") Signed-off-by: David Howells dhowells@redhat.com Reviewed-by: Jeffrey Altman jaltman@auristor.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/cmservice.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/fs/afs/cmservice.c b/fs/afs/cmservice.c index 9e51d6fe7e8f9..40c6860d4c632 100644 --- a/fs/afs/cmservice.c +++ b/fs/afs/cmservice.c @@ -423,18 +423,14 @@ static void SRXAFSCB_ProbeUuid(struct work_struct *work) struct afs_call *call = container_of(work, struct afs_call, work); struct afs_uuid *r = call->request;
- struct { - __be32 match; - } reply; - _enter("");
if (memcmp(r, &call->net->uuid, sizeof(call->net->uuid)) == 0) - reply.match = htonl(0); + afs_send_empty_reply(call); else - reply.match = htonl(1); + rxrpc_kernel_abort_call(call->net->socket, call->rxcall, + 1, 1, "K-1");
- afs_send_simple_reply(call, &reply, sizeof(reply)); afs_put_call(call); _leave(""); }
From: Marc Dionne marc.dionne@auristor.com
[ Upstream commit 4a46fdba449a5cd890271df5a9e23927d519ed00 ]
afs_deliver_vl_get_entry_by_name_u() scans through the vl entry received from the volume location server and builds a return list containing the sites that are currently valid. When assigning values for the return list, the index into the vl entry (i) is used rather than the one for the new list (entry->nr_server). If all sites are usable, this works out fine as the indices will match. If some sites are not valid, for example if AFS_VLSF_DONTUSE is set, fs_mask and the uuid will be set for the wrong return site.
Fix this by using entry->nr_server as the index into the arrays being filled in rather than i.
This can lead to EDESTADDRREQ errors if none of the returned sites have a valid fs_mask.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: Marc Dionne marc.dionne@auristor.com Signed-off-by: David Howells dhowells@redhat.com Reviewed-by: Jeffrey Altman jaltman@auristor.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/vlclient.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/fs/afs/vlclient.c b/fs/afs/vlclient.c index c3b740813fc71..c7dd47eaff29d 100644 --- a/fs/afs/vlclient.c +++ b/fs/afs/vlclient.c @@ -60,23 +60,24 @@ static int afs_deliver_vl_get_entry_by_name_u(struct afs_call *call) struct afs_uuid__xdr *xdr; struct afs_uuid *uuid; int j; + int n = entry->nr_servers;
tmp = ntohl(uvldb->serverFlags[i]); if (tmp & AFS_VLSF_DONTUSE || (new_only && !(tmp & AFS_VLSF_NEWREPSITE))) continue; if (tmp & AFS_VLSF_RWVOL) { - entry->fs_mask[i] |= AFS_VOL_VTM_RW; + entry->fs_mask[n] |= AFS_VOL_VTM_RW; if (vlflags & AFS_VLF_BACKEXISTS) - entry->fs_mask[i] |= AFS_VOL_VTM_BAK; + entry->fs_mask[n] |= AFS_VOL_VTM_BAK; } if (tmp & AFS_VLSF_ROVOL) - entry->fs_mask[i] |= AFS_VOL_VTM_RO; - if (!entry->fs_mask[i]) + entry->fs_mask[n] |= AFS_VOL_VTM_RO; + if (!entry->fs_mask[n]) continue;
xdr = &uvldb->serverNumber[i]; - uuid = (struct afs_uuid *)&entry->fs_server[i]; + uuid = (struct afs_uuid *)&entry->fs_server[n]; uuid->time_low = xdr->time_low; uuid->time_mid = htons(ntohl(xdr->time_mid)); uuid->time_hi_and_version = htons(ntohl(xdr->time_hi_and_version));
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit a6eed4ab5dd4bfb696c1a3f49742b8d1846a66a0 ]
In afs_read_dir(), there is an if statement on line 255 to check whether req->pages is NULL: if (!req->pages) goto error;
If req->pages is NULL, afs_put_read() on line 337 is executed. In afs_put_read(), req->pages[i] is used on line 195. Thus, a possible null-pointer dereference may occur in this case.
To fix this possible bug, an if statement is added in afs_put_read() to check req->pages.
This bug is found by a static analysis tool STCheck written by us.
Fixes: f3ddee8dc4e2 ("afs: Fix directory handling") Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/file.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/fs/afs/file.c b/fs/afs/file.c index 7d4f26198573d..843d3b970b845 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -193,11 +193,13 @@ void afs_put_read(struct afs_read *req) int i;
if (refcount_dec_and_test(&req->usage)) { - for (i = 0; i < req->nr_pages; i++) - if (req->pages[i]) - put_page(req->pages[i]); - if (req->pages != req->array) - kfree(req->pages); + if (req->pages) { + for (i = 0; i < req->nr_pages; i++) + if (req->pages[i]) + put_page(req->pages[i]); + if (req->pages != req->array) + kfree(req->pages); + } kfree(req); } }
From: David Howells dhowells@redhat.com
[ Upstream commit 5dc84855b0fc7e1db182b55c5564fd539d6eff92 ]
In the in-kernel afs filesystem, d_fsdata is set with the data version of the parent directory. afs_d_revalidate() will update this to the current directory version, but it shouldn't do this if it the value it read from d_fsdata is the same as no lock is held and cmpxchg() is not used.
Fix the code to only change the value if it is different from the current directory version.
Fixes: 260a980317da ("[AFS]: Add "directory write" support.") Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/dir.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/afs/dir.c b/fs/afs/dir.c index 855bf2b79fed4..54e7f6f1405e2 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -937,7 +937,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags) dir_version = (long)dir->status.data_version; de_version = (long)dentry->d_fsdata; if (de_version == dir_version) - goto out_valid; + goto out_valid_noupdate;
dir_version = (long)dir->invalid_before; if (de_version - dir_version >= 0) @@ -1001,6 +1001,7 @@ static int afs_d_revalidate(struct dentry *dentry, unsigned int flags)
out_valid: dentry->d_fsdata = (void *)dir_version; +out_valid_noupdate: dput(parent); key_put(key); _leave(" = 1 [valid]");
From: Nishad Kamdar nishadkamdar@gmail.com
[ Upstream commit fac7b714c514fcc555541e1d6450c694b0a5f8d3 ]
This patch corrects the SPDX License Identifier style in header files related to Drivers for Intel(R) Trace Hub controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used)
Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46
Suggested-by: Joe Perches joe@perches.com Signed-off-by: Nishad Kamdar nishadkamdar@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwtracing/intel_th/msu.h | 2 +- drivers/hwtracing/intel_th/pti.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/intel_th/msu.h b/drivers/hwtracing/intel_th/msu.h index 9cc8aced6116a..979548791b7db 100644 --- a/drivers/hwtracing/intel_th/msu.h +++ b/drivers/hwtracing/intel_th/msu.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Intel(R) Trace Hub Memory Storage Unit (MSU) data structures * diff --git a/drivers/hwtracing/intel_th/pti.h b/drivers/hwtracing/intel_th/pti.h index e9381babc84c3..7dfc0431333b7 100644 --- a/drivers/hwtracing/intel_th/pti.h +++ b/drivers/hwtracing/intel_th/pti.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Intel(R) Trace Hub PTI output data structures *
On Tue, 2019-08-20 at 09:41 -0400, Sasha Levin wrote:
From: Nishad Kamdar nishadkamdar@gmail.com
[ Upstream commit fac7b714c514fcc555541e1d6450c694b0a5f8d3 ]
This patch corrects the SPDX License Identifier style in header files related to Drivers for Intel(R) Trace Hub controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used)
Is there a reason to backport license header changes?
I believe there is not.
On Tue, Aug 20, 2019 at 06:47:53AM -0700, Joe Perches wrote:
On Tue, 2019-08-20 at 09:41 -0400, Sasha Levin wrote:
From: Nishad Kamdar nishadkamdar@gmail.com
[ Upstream commit fac7b714c514fcc555541e1d6450c694b0a5f8d3 ]
This patch corrects the SPDX License Identifier style in header files related to Drivers for Intel(R) Trace Hub controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used)
Is there a reason to backport license header changes?
I believe there is not.
There is not, I must have missed this one.
-- Thanks, Sasha
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit 86b9a63e595ff03f9d0a7b92b6acc231fecefc29 ]
After calling nvme_loop_delete_ctrl(), the controllers will not yet be deleted because nvme_delete_ctrl() only schedules work to do the delete.
This means a race can occur if a port is removed but there are still active controllers trying to access that memory.
To fix this, flush the nvme_delete_wq before returning from nvme_loop_remove_port() so that any controllers that might be in the process of being deleted won't access a freed port.
Signed-off-by: Logan Gunthorpe logang@deltatee.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Max Gurtovoy maxg@mellanox.com Reviewed-by : Chaitanya Kulkarni chaitanya.kulkarni@wdc.com Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/loop.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index 9908082b32c4b..137a27fa369cb 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -678,6 +678,14 @@ static void nvme_loop_remove_port(struct nvmet_port *port) mutex_lock(&nvme_loop_ports_mutex); list_del_init(&port->entry); mutex_unlock(&nvme_loop_ports_mutex); + + /* + * Ensure any ctrls that are in the process of being + * deleted are in fact deleted before we return + * and free the port. This is to prevent active + * ctrls from using a port after it's freed. + */ + flush_workqueue(nvme_delete_wq); }
static const struct nvmet_fabrics_ops nvme_loop_ops = {
From: Sagi Grimberg sagi@grimberg.me
[ Upstream commit b9156daeb1601d69007b7e50efcf89d69d72ec1d ]
When the user issues a command with side effects, we will end up freezing the namespace request queue when updating disk info (and the same for the corresponding mpath disk node).
However, we are not freezing the mpath node request queue, which means that mpath I/O can still come in and block on blk_queue_enter (called from nvme_ns_head_make_request -> direct_make_request).
This is a deadlock, because blk_queue_enter will block until the inner namespace request queue is unfroze, but that process is blocked because the namespace revalidation is trying to update the mpath disk info and freeze its request queue (which will never complete because of the I/O that is blocked on blk_queue_enter).
Fix this by freezing all the subsystem nsheads request queues before executing the passthru command. Given that these commands are infrequent we should not worry about this temporary I/O freeze to keep things sane.
Here is the matching hang traces: -- [ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds. [ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.487274] systemd-udevd D 0 17994 1 0x00000000 [ 374.493407] Call Trace: [ 374.496145] __schedule+0x2ef/0x620 [ 374.500047] schedule+0x38/0xa0 [ 374.503569] blk_queue_enter+0x139/0x220 [ 374.507959] ? remove_wait_queue+0x60/0x60 [ 374.512540] direct_make_request+0x60/0x130 [ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core] [ 374.523740] ? generic_make_request_checks+0x307/0x6f0 [ 374.529484] generic_make_request+0x10d/0x2e0 [ 374.534356] submit_bio+0x75/0x140 [ 374.538163] ? guard_bio_eod+0x32/0xe0 [ 374.542361] submit_bh_wbc+0x171/0x1b0 [ 374.546553] block_read_full_page+0x1ed/0x330 [ 374.551426] ? check_disk_change+0x70/0x70 [ 374.556008] ? scan_shadow_nodes+0x30/0x30 [ 374.560588] blkdev_readpage+0x18/0x20 [ 374.564783] do_read_cache_page+0x301/0x860 [ 374.569463] ? blkdev_writepages+0x10/0x10 [ 374.574037] ? prep_new_page+0x88/0x130 [ 374.578329] ? get_page_from_freelist+0xa2f/0x1280 [ 374.583688] ? __alloc_pages_nodemask+0x179/0x320 [ 374.588947] read_cache_page+0x12/0x20 [ 374.593142] read_dev_sector+0x2d/0xd0 [ 374.597337] read_lba+0x104/0x1f0 [ 374.601046] find_valid_gpt+0xfa/0x720 [ 374.605243] ? string_nocheck+0x58/0x70 [ 374.609534] ? find_valid_gpt+0x720/0x720 [ 374.614016] efi_partition+0x89/0x430 [ 374.618113] ? string+0x48/0x60 [ 374.621632] ? snprintf+0x49/0x70 [ 374.625339] ? find_valid_gpt+0x720/0x720 [ 374.629828] check_partition+0x116/0x210 [ 374.634214] rescan_partitions+0xb6/0x360 [ 374.638699] __blkdev_reread_part+0x64/0x70 [ 374.643377] blkdev_reread_part+0x23/0x40 [ 374.647860] blkdev_ioctl+0x48c/0x990 [ 374.651956] block_ioctl+0x41/0x50 [ 374.655766] do_vfs_ioctl+0xa7/0x600 [ 374.659766] ? locks_lock_inode_wait+0xb1/0x150 [ 374.664832] ksys_ioctl+0x67/0x90 [ 374.668539] __x64_sys_ioctl+0x1a/0x20 [ 374.672732] do_syscall_64+0x5a/0x1c0 [ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds. [ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.760170] nvmeadm D 0 49141 36333 0x00004080 [ 374.766301] Call Trace: [ 374.769038] __schedule+0x2ef/0x620 [ 374.772939] schedule+0x38/0xa0 [ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100 [ 374.781614] ? remove_wait_queue+0x60/0x60 [ 374.786192] blk_mq_freeze_queue+0x1a/0x20 [ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core] [ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core] [ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core] [ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core] [ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core] [ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core] [ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core] [ 374.833114] do_vfs_ioctl+0xa7/0x600 [ 374.837117] ? __audit_syscall_entry+0xdd/0x130 [ 374.842184] ksys_ioctl+0x67/0x90 [ 374.845891] __x64_sys_ioctl+0x1a/0x20 [ 374.850082] do_syscall_64+0x5a/0x1c0 [ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9 --
Reported-by: James Puthukattukaran james.puthukattukaran@oracle.com Tested-by: James Puthukattukaran james.puthukattukaran@oracle.com Reviewed-by: Keith Busch kbusch@kernel.org Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 5 +++++ drivers/nvme/host/multipath.c | 30 ++++++++++++++++++++++++++++++ drivers/nvme/host/nvme.h | 12 ++++++++++++ 3 files changed, 47 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index d838a300ae770..ae0b01059fc6d 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1183,6 +1183,9 @@ static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns, */ if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) { mutex_lock(&ctrl->scan_lock); + mutex_lock(&ctrl->subsys->lock); + nvme_mpath_start_freeze(ctrl->subsys); + nvme_mpath_wait_freeze(ctrl->subsys); nvme_start_freeze(ctrl); nvme_wait_freeze(ctrl); } @@ -1213,6 +1216,8 @@ static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects) nvme_update_formats(ctrl); if (effects & (NVME_CMD_EFFECTS_LBCC | NVME_CMD_EFFECTS_CSE_MASK)) { nvme_unfreeze(ctrl); + nvme_mpath_unfreeze(ctrl->subsys); + mutex_unlock(&ctrl->subsys->lock); mutex_unlock(&ctrl->scan_lock); } if (effects & NVME_CMD_EFFECTS_CCC) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index a11e210d173e4..05d6371c7f385 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -20,6 +20,36 @@ module_param(multipath, bool, 0444); MODULE_PARM_DESC(multipath, "turn on native support for multiple controllers per subsystem");
+void nvme_mpath_unfreeze(struct nvme_subsystem *subsys) +{ + struct nvme_ns_head *h; + + lockdep_assert_held(&subsys->lock); + list_for_each_entry(h, &subsys->nsheads, entry) + if (h->disk) + blk_mq_unfreeze_queue(h->disk->queue); +} + +void nvme_mpath_wait_freeze(struct nvme_subsystem *subsys) +{ + struct nvme_ns_head *h; + + lockdep_assert_held(&subsys->lock); + list_for_each_entry(h, &subsys->nsheads, entry) + if (h->disk) + blk_mq_freeze_queue_wait(h->disk->queue); +} + +void nvme_mpath_start_freeze(struct nvme_subsystem *subsys) +{ + struct nvme_ns_head *h; + + lockdep_assert_held(&subsys->lock); + list_for_each_entry(h, &subsys->nsheads, entry) + if (h->disk) + blk_freeze_queue_start(h->disk->queue); +} + /* * If multipathing is enabled we need to always use the subsystem instance * number for numbering our devices to avoid conflicts between subsystems that diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index d5e29b57eb340..2653e1f4196d5 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -469,6 +469,9 @@ static inline bool nvme_ctrl_use_ana(struct nvme_ctrl *ctrl) return ctrl->ana_log_buf != NULL; }
+void nvme_mpath_unfreeze(struct nvme_subsystem *subsys); +void nvme_mpath_wait_freeze(struct nvme_subsystem *subsys); +void nvme_mpath_start_freeze(struct nvme_subsystem *subsys); void nvme_set_disk_name(char *disk_name, struct nvme_ns *ns, struct nvme_ctrl *ctrl, int *flags); void nvme_failover_req(struct request *req); @@ -553,6 +556,15 @@ static inline void nvme_mpath_uninit(struct nvme_ctrl *ctrl) static inline void nvme_mpath_stop(struct nvme_ctrl *ctrl) { } +static inline void nvme_mpath_unfreeze(struct nvme_subsystem *subsys) +{ +} +static inline void nvme_mpath_wait_freeze(struct nvme_subsystem *subsys) +{ +} +static inline void nvme_mpath_start_freeze(struct nvme_subsystem *subsys) +{ +} #endif /* CONFIG_NVME_MULTIPATH */
#ifdef CONFIG_NVM
From: Keith Busch kbusch@kernel.org
[ Upstream commit bd46a90634302bfe791e93ad5496f98f165f7ae0 ]
Ensure the controller is not in the NEW state when nvme_probe() exits. This will always allow a subsequent nvme_remove() to set the state to DELETING, fixing a potential race between the initial asynchronous probe and device removal.
Reported-by: Li Zhong lizhongfs@gmail.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 0a5d064f82ca3..a64a8bca0d5b9 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2468,7 +2468,7 @@ static void nvme_async_probe(void *data, async_cookie_t cookie) { struct nvme_dev *dev = data;
- nvme_reset_ctrl_sync(&dev->ctrl); + flush_work(&dev->ctrl.reset_work); flush_work(&dev->ctrl.scan_work); nvme_put_ctrl(&dev->ctrl); } @@ -2535,6 +2535,7 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id)
dev_info(dev->ctrl.device, "pci function %s\n", dev_name(&pdev->dev));
+ nvme_reset_ctrl(&dev->ctrl); nvme_get_ctrl(&dev->ctrl); async_schedule(nvme_async_probe, dev);
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit b07dd9b400981f487940a4d84292d3a0e7cd9362 ]
wrong prefix and wrong macro.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20190725234032.21152-14-pierre-louis.bossart@linux... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/cadence_master.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index cb6a331f448ab..d3d7de5a319c5 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -81,8 +81,8 @@
#define CDNS_MCP_INTSET 0x4C
-#define CDNS_SDW_SLAVE_STAT 0x50 -#define CDNS_MCP_SLAVE_STAT_MASK BIT(1, 0) +#define CDNS_MCP_SLAVE_STAT 0x50 +#define CDNS_MCP_SLAVE_STAT_MASK GENMASK(1, 0)
#define CDNS_MCP_SLAVE_INTSTAT0 0x54 #define CDNS_MCP_SLAVE_INTSTAT1 0x58
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 664b16589f882202b8fa8149d0074f3159bade76 ]
Two off-by-one errors: INTSTAT0 missed BIT(31) and INTSTAT1 is only defined on first 16 bits.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20190725234032.21152-15-pierre-louis.bossart@linux... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/cadence_master.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index d3d7de5a319c5..70f78eda037e8 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -96,8 +96,8 @@ #define CDNS_MCP_SLAVE_INTMASK0 0x5C #define CDNS_MCP_SLAVE_INTMASK1 0x60
-#define CDNS_MCP_SLAVE_INTMASK0_MASK GENMASK(30, 0) -#define CDNS_MCP_SLAVE_INTMASK1_MASK GENMASK(16, 0) +#define CDNS_MCP_SLAVE_INTMASK0_MASK GENMASK(31, 0) +#define CDNS_MCP_SLAVE_INTMASK1_MASK GENMASK(15, 0)
#define CDNS_MCP_PORT_INTSTAT 0x64 #define CDNS_MCP_PDI_STAT 0x6C
From: Jacopo Mondi jacopo+renesas@jmondi.org
[ Upstream commit b9ddd5091160793ee9fac10da765cf3f53d2aaf0 ]
The max9611 driver reads the die temperature at probe time to validate the communication channel. Use the actual read value to perform the test instead of the read function return value, which was mistakenly used so far.
The temperature reading test was only successful because the 0 return value is in the range of supported temperatures.
Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver") Signed-off-by: Jacopo Mondi jacopo+renesas@jmondi.org Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/adc/max9611.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c index ce9af43fa2de7..49c1956e6a674 100644 --- a/drivers/iio/adc/max9611.c +++ b/drivers/iio/adc/max9611.c @@ -483,7 +483,7 @@ static int max9611_init(struct max9611_dev *max9611) if (ret) return ret;
- regval = ret & MAX9611_TEMP_MASK; + regval &= MAX9611_TEMP_MASK;
if ((regval > MAX9611_TEMP_MAX_POS && regval < MAX9611_TEMP_MIN_NEG) ||
From: zhengbin zhengbin13@huawei.com
[ Upstream commit b33d567560c1aadf3033290d74d4fd67af47aa61 ]
In panel_attach, if misc_register fails, we need to delete scan_timer, which was setup in keypad_init->init_scan_timer.
Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: zhengbin zhengbin13@huawei.com Signed-off-by: Miguel Ojeda miguel.ojeda.sandonis@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/auxdisplay/panel.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/auxdisplay/panel.c b/drivers/auxdisplay/panel.c index 3b25a643058c9..0b8e2a7d6e934 100644 --- a/drivers/auxdisplay/panel.c +++ b/drivers/auxdisplay/panel.c @@ -1618,6 +1618,8 @@ static void panel_attach(struct parport *port) return;
err_lcd_unreg: + if (scan_timer.function) + del_timer_sync(&scan_timer); if (lcd.enabled) charlcd_unregister(lcd.charlcd); err_unreg_device:
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit 39c71a5b8212f4b502d9a630c6706ac723abd422 ]
In stm32_mdma_irq_handler(), chan is checked on line 1368. When chan is NULL, it is still used on line 1369: dev_err(chan2dev(chan), "MDMA channel not initialized\n");
Thus, a possible null-pointer dereference may occur.
To fix this bug, "dev_dbg(mdma2dev(dmadev), ...)" is used instead.
Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Link: https://lore.kernel.org/r/20190729020849.17971-1-baijiaju1990@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/stm32-mdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/stm32-mdma.c b/drivers/dma/stm32-mdma.c index 06dd1725375e5..8c3c3e5b812a8 100644 --- a/drivers/dma/stm32-mdma.c +++ b/drivers/dma/stm32-mdma.c @@ -1376,7 +1376,7 @@ static irqreturn_t stm32_mdma_irq_handler(int irq, void *devid)
chan = &dmadev->chan[id]; if (!chan) { - dev_err(chan2dev(chan), "MDMA channel not initialized\n"); + dev_dbg(mdma2dev(dmadev), "MDMA channel not initialized\n"); goto exit; }
From: Hans Verkuil hverkuil@xs4all.nl
[ Upstream commit d555c34338cae844b207564c482e5a3fb089d25e ]
The OMAP 4 TRM specifies that when using double-index addressing the address increases by the ES plus the EI value minus 1 within a frame. When a full frame is transferred, the address increases by the ES plus the frame index (FI) value minus 1.
The omap-dma code didn't account for the 'minus 1' in the FI register. To get correct addressing, add 1 to the src_icg value.
This was found when testing a hacked version of the media m2m-deinterlace.c driver on a Pandaboard.
The only other source that uses this feature is omap_vout_vrfb.c, and that adds a + 1 when setting the dst_icg. This is a workaround for the broken omap-dma.c behavior. So remove the workaround at the same time that we fix omap-dma.c.
I tested the omap_vout driver with a Beagle XM board to check that the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma bug.
Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Acked-by: Peter Ujfalusi peter.ujfalusi@ti.com Acked-by: Mauro Carvalho Chehab mchehab+samsung@kernel.org Link: https://lore.kernel.org/r/952e7f51-f208-9333-6f58-b7ed20d2ea0b@xs4all.nl Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/ti/omap-dma.c | 4 ++-- drivers/media/platform/omap/omap_vout_vrfb.c | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c index a4a931ddf6f69..aeb9c29e52554 100644 --- a/drivers/dma/ti/omap-dma.c +++ b/drivers/dma/ti/omap-dma.c @@ -1237,7 +1237,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_interleaved( if (src_icg) { d->ccr |= CCR_SRC_AMODE_DBLIDX; d->ei = 1; - d->fi = src_icg; + d->fi = src_icg + 1; } else if (xt->src_inc) { d->ccr |= CCR_SRC_AMODE_POSTINC; d->fi = 0; @@ -1252,7 +1252,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_interleaved( if (dst_icg) { d->ccr |= CCR_DST_AMODE_DBLIDX; sg->ei = 1; - sg->fi = dst_icg; + sg->fi = dst_icg + 1; } else if (xt->dst_inc) { d->ccr |= CCR_DST_AMODE_POSTINC; sg->fi = 0; diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c index 29e3f5da59c1f..11ec048929e80 100644 --- a/drivers/media/platform/omap/omap_vout_vrfb.c +++ b/drivers/media/platform/omap/omap_vout_vrfb.c @@ -253,8 +253,7 @@ int omap_vout_prepare_vrfb(struct omap_vout_device *vout, */
pixsize = vout->bpp * vout->vrfb_bpp; - dst_icg = ((MAX_PIXELS_PER_LINE * pixsize) - - (vout->pix.width * vout->bpp)) + 1; + dst_icg = MAX_PIXELS_PER_LINE * pixsize - vout->pix.width * vout->bpp;
xt->src_start = vout->buf_phy_addr[vb->i]; xt->dst_start = vout->vrfb_context[vb->i].paddr[0];
From: Robin Murphy robin.murphy@arm.com
[ Upstream commit ab2cbeb0ed301a9f0460078e91b09f39958212ef ]
Since scatterlist dimensions are all unsigned ints, in the relatively rare cases where a device's max_segment_size is set to UINT_MAX, then the "cur_len + s_length <= max_len" check in __finalise_sg() will always return true. As a result, the corner case of such a device mapping an excessively large scatterlist which is mergeable to or beyond a total length of 4GB can lead to overflow and a bogus truncated dma_length in the resulting segment.
As we already assume that any single segment must be no longer than max_len to begin with, this can easily be addressed by reshuffling the comparison.
Fixes: 809eac54cdd6 ("iommu/dma: Implement scatterlist segment merging") Reported-by: Nicolin Chen nicoleotsuka@gmail.com Tested-by: Nicolin Chen nicoleotsuka@gmail.com Signed-off-by: Robin Murphy robin.murphy@arm.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/dma-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index 511ff9a1d6d94..f9dbb064f9571 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -675,7 +675,7 @@ static int __finalise_sg(struct device *dev, struct scatterlist *sg, int nents, * - and wouldn't make the resulting output segment too long */ if (cur_len && !s_iova_off && (dma_addr & seg_mask) && - (cur_len + s_length <= max_len)) { + (max_len - cur_len >= s_length)) { /* ...then concatenate it with the previous one */ cur_len += s_length; } else {
From: Benjamin Herrenschmidt benh@kernel.crashing.org
[ Upstream commit 602fda17c7356bb7ae98467d93549057481d11dd ]
In some cases, one can get out of suspend with a reset or a disconnect followed by a reconnect. Previously we would leave a stale suspended flag set.
Signed-off-by: Benjamin Herrenschmidt benh@kernel.crashing.org Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/composite.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index b8a15840b4ffd..dfcabadeed01b 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1976,6 +1976,7 @@ void composite_disconnect(struct usb_gadget *gadget) * disconnect callbacks? */ spin_lock_irqsave(&cdev->lock, flags); + cdev->suspended = 0; if (cdev->config) reset_config(cdev); if (cdev->driver->disconnect)
From: Benjamin Herrenschmidt benh@kernel.crashing.org
[ Upstream commit 4a56a478a525d6427be90753451c40e1327caa1a ]
If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable():
fsg_disable() ... handle_exception() sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it.
---> interrupt fsg_set_alt sets common->new_fsg queues a new FSG_STATE_CONFIG_CHANGE <---
Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc...
But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong.
Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case.
This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly.
That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event.
Signed-off-by: Benjamin Herrenschmidt benh@kernel.crashing.org Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/f_mass_storage.c | 28 +++++++++++++------- 1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 1074cb82ec172..0b7b4d09785b6 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -261,7 +261,7 @@ struct fsg_common; struct fsg_common { struct usb_gadget *gadget; struct usb_composite_dev *cdev; - struct fsg_dev *fsg, *new_fsg; + struct fsg_dev *fsg; wait_queue_head_t io_wait; wait_queue_head_t fsg_wait;
@@ -290,6 +290,7 @@ struct fsg_common { unsigned int bulk_out_maxpacket; enum fsg_state state; /* For exception handling */ unsigned int exception_req_tag; + void *exception_arg;
enum data_direction data_dir; u32 data_size; @@ -391,7 +392,8 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
/* These routines may be called in process context or in_irq */
-static void raise_exception(struct fsg_common *common, enum fsg_state new_state) +static void __raise_exception(struct fsg_common *common, enum fsg_state new_state, + void *arg) { unsigned long flags;
@@ -404,6 +406,7 @@ static void raise_exception(struct fsg_common *common, enum fsg_state new_state) if (common->state <= new_state) { common->exception_req_tag = common->ep0_req_tag; common->state = new_state; + common->exception_arg = arg; if (common->thread_task) send_sig_info(SIGUSR1, SEND_SIG_FORCED, common->thread_task); @@ -411,6 +414,10 @@ static void raise_exception(struct fsg_common *common, enum fsg_state new_state) spin_unlock_irqrestore(&common->lock, flags); }
+static void raise_exception(struct fsg_common *common, enum fsg_state new_state) +{ + __raise_exception(common, new_state, NULL); +}
/*-------------------------------------------------------------------------*/
@@ -2285,16 +2292,16 @@ static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->new_fsg = fsg; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + + __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg); return USB_GADGET_DELAYED_STATUS; }
static void fsg_disable(struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->new_fsg = NULL; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + + __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL); }
@@ -2307,6 +2314,7 @@ static void handle_exception(struct fsg_common *common) enum fsg_state old_state; struct fsg_lun *curlun; unsigned int exception_req_tag; + struct fsg_dev *new_fsg;
/* * Clear the existing signals. Anything but SIGUSR1 is converted @@ -2360,6 +2368,7 @@ static void handle_exception(struct fsg_common *common) common->next_buffhd_to_fill = &common->buffhds[0]; common->next_buffhd_to_drain = &common->buffhds[0]; exception_req_tag = common->exception_req_tag; + new_fsg = common->exception_arg; old_state = common->state; common->state = FSG_STATE_NORMAL;
@@ -2413,8 +2422,8 @@ static void handle_exception(struct fsg_common *common) break;
case FSG_STATE_CONFIG_CHANGE: - do_set_interface(common, common->new_fsg); - if (common->new_fsg) + do_set_interface(common, new_fsg); + if (new_fsg) usb_composite_setup_continue(common->cdev); break;
@@ -2989,8 +2998,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
DBG(fsg, "unbind\n"); if (fsg->common->fsg == fsg) { - fsg->common->new_fsg = NULL; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL); /* FIXME: make interruptible or killable somehow? */ wait_event(common->fsg_wait, common->fsg != fsg); }
From: Wenwen Wang wenwen@cs.uga.edu
[ Upstream commit ae78ca3cf3d9e9f914bfcd0bc5c389ff18b9c2e0 ]
In read_per_ring_refs(), after 'req' and related memory regions are allocated, xen_blkif_map() is invoked to map the shared frame, irq, and etc. However, if this mapping process fails, no cleanup is performed, leading to memory leaks. To fix this issue, invoke the cleanup before returning the error.
Acked-by: Roger Pau Monné roger.pau@citrix.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Wenwen Wang wenwen@cs.uga.edu Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/xen-blkback/xenbus.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index a4bc74e72c394..55869b362fdfb 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -974,6 +974,7 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir) } blkif->nr_ring_pages = nr_grefs;
+ err = -ENOMEM; for (i = 0; i < nr_grefs * XEN_BLKIF_REQS_PER_PAGE; i++) { req = kzalloc(sizeof(*req), GFP_KERNEL); if (!req) @@ -996,7 +997,7 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir) err = xen_blkif_map(ring, ring_ref, nr_grefs, evtchn); if (err) { xenbus_dev_fatal(dev, err, "mapping ring-ref port %u", evtchn); - return err; + goto fail; }
return 0; @@ -1016,8 +1017,7 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir) } kfree(req); } - return -ENOMEM; - + return err; }
static int connect_ring(struct backend_info *be)
From: Will Deacon will@kernel.org
[ Upstream commit 5717fe5ab38f9ccb32718bcb03bea68409c9cce4 ]
If a CPU doesn't support the page size for which the kernel is configured, then we will complain and refuse to bring it online. For secondary CPUs (and the boot CPU on a system booting with EFI), we will also print an error identifying the mismatch.
Consequently, the only time that the cpufeature code can detect a granule size mismatch is for a granule other than the one that is currently being used. Although we would rather such systems didn't exist, we've unfortunately lost that battle and Kevin reports that on his amlogic S922X (odroid-n2 board) we end up warning and taining with defconfig because 16k pages are not supported by all of the CPUs.
In such a situation, we don't actually care about the feature mismatch, particularly now that KVM only exposes the sanitised view of the CPU registers (commit 93390c0a1b20 - "arm64: KVM: Hide unsupported AArch64 CPU features from guests"). Treat the granule fields as non-strict and let Kevin run without a tainted kernel.
Cc: Marc Zyngier maz@kernel.org Reported-by: Kevin Hilman khilman@baylibre.com Tested-by: Kevin Hilman khilman@baylibre.com Acked-by: Mark Rutland mark.rutland@arm.com Acked-by: Suzuki K Poulose suzuki.poulose@arm.com Signed-off-by: Will Deacon will@kernel.org [catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit] Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/cpufeature.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index bce06083685dc..94babc3d0ec2c 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -165,9 +165,17 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = { };
static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { - S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI), - S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI), - ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI), + /* + * We already refuse to boot CPUs that don't support our configured + * page size, so we can only detect mismatches for a page size other + * than the one we're currently using. Unfortunately, SoCs like this + * exist in the wild so, even though we don't like it, we'll have to go + * along with it and treat them as non-strict. + */ + S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI), + S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI), + ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_BIGENDEL0_SHIFT, 4, 0), /* Linux shouldn't care about secure memory */ ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_SNSMEM_SHIFT, 4, 0),
From: Wolfram Sang wsa+renesas@sang-engineering.com
[ Upstream commit 7b814d852af6944657c2961039f404c4490771c0 ]
After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device.
Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Reported-by: Krzysztof Adamski krzysztof.adamski@nokia.com Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Reviewed-by: Krzysztof Adamski krzysztof.adamski@nokia.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-rcar.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 254e6219e5389..2c29f901d3090 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -139,6 +139,7 @@ struct rcar_i2c_priv { enum dma_data_direction dma_direction;
struct reset_control *rstc; + int irq; };
#define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) @@ -859,9 +860,11 @@ static int rcar_unreg_slave(struct i2c_client *slave)
WARN_ON(!priv->slave);
+ /* disable irqs and ensure none is running before clearing ptr */ rcar_i2c_write(priv, ICSIER, 0); rcar_i2c_write(priv, ICSCR, 0);
+ synchronize_irq(priv->irq); priv->slave = NULL;
pm_runtime_put(rcar_i2c_priv_to_dev(priv)); @@ -916,7 +919,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; struct device *dev = &pdev->dev; struct i2c_timings i2c_t; - int irq, ret; + int ret;
priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL); if (!priv) @@ -979,10 +982,10 @@ static int rcar_i2c_probe(struct platform_device *pdev) pm_runtime_put(dev);
- irq = platform_get_irq(pdev, 0); - ret = devm_request_irq(dev, irq, rcar_i2c_irq, 0, dev_name(dev), priv); + priv->irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, dev_name(dev), priv); if (ret < 0) { - dev_err(dev, "cannot get irq %d\n", irq); + dev_err(dev, "cannot get irq %d\n", priv->irq); goto out_pm_disable; }
From: Wolfram Sang wsa+renesas@sang-engineering.com
[ Upstream commit d7437fc0d8291181debe032671a289b6bd93f46f ]
After we disabled interrupts, there might still be an active one running. Sync before clearing the pointer to the slave device.
Fixes: c31d0a00021d ("i2c: emev2: add slave support") Reported-by: Krzysztof Adamski krzysztof.adamski@nokia.com Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Reviewed-by: Krzysztof Adamski krzysztof.adamski@nokia.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-emev2.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c index 35b302d983e0d..959d4912ec0d5 100644 --- a/drivers/i2c/busses/i2c-emev2.c +++ b/drivers/i2c/busses/i2c-emev2.c @@ -69,6 +69,7 @@ struct em_i2c_device { struct completion msg_done; struct clk *sclk; struct i2c_client *slave; + int irq; };
static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg) @@ -339,6 +340,12 @@ static int em_i2c_unreg_slave(struct i2c_client *slave)
writeb(0, priv->base + I2C_OFS_SVA0);
+ /* + * Wait for interrupt to finish. New slave irqs cannot happen because we + * cleared the slave address and, thus, only extension codes will be + * detected which do not use the slave ptr. + */ + synchronize_irq(priv->irq); priv->slave = NULL;
return 0; @@ -355,7 +362,7 @@ static int em_i2c_probe(struct platform_device *pdev) { struct em_i2c_device *priv; struct resource *r; - int irq, ret; + int ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -390,8 +397,8 @@ static int em_i2c_probe(struct platform_device *pdev)
em_i2c_reset(&priv->adap);
- irq = platform_get_irq(pdev, 0); - ret = devm_request_irq(&pdev->dev, irq, em_i2c_irq_handler, 0, + priv->irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0, "em_i2c", priv); if (ret) goto err_clk; @@ -401,7 +408,8 @@ static int em_i2c_probe(struct platform_device *pdev) if (ret) goto err_clk;
- dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, irq); + dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, + priv->irq);
return 0;
From: "Y.C. Chen" yc_chen@aspeedtech.com
[ Upstream commit 05b439711f6ff8700e8660f97a1179650778b9cb ]
There is another thread still access standard VGA I/O while loading drm driver. Disable standard VGA I/O decode to avoid this issue.
Signed-off-by: Y.C. Chen yc_chen@aspeedtech.com Reviewed-by: Benjamin Herrenschmidt benh@kernel.crashing.org Signed-off-by: Dave Airlie airlied@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-em... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/ast/ast_main.c | 5 ++++- drivers/gpu/drm/ast/ast_mode.c | 2 +- drivers/gpu/drm/ast/ast_post.c | 2 +- 3 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c index 373700c05a00f..224fa1ef87ff9 100644 --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -131,8 +131,8 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
/* Enable extended register access */ - ast_enable_mmio(dev); ast_open_key(ast); + ast_enable_mmio(dev);
/* Find out whether P2A works or whether to use device-tree */ ast_detect_config_mode(dev, &scu_rev); @@ -576,6 +576,9 @@ void ast_driver_unload(struct drm_device *dev) { struct ast_private *ast = dev->dev_private;
+ /* enable standard VGA decode */ + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04); + ast_release_firmware(dev); kfree(ast->dp501_fw_addr); ast_mode_fini(dev); diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 8bb355d5d43d8..9d92d2d2fcfc7 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -600,7 +600,7 @@ static int ast_crtc_mode_set(struct drm_crtc *crtc, return -EINVAL; ast_open_key(ast);
- ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa1, 0xff, 0x04); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06);
ast_set_std_reg(crtc, adjusted_mode, &vbios_mode); ast_set_crtc_reg(crtc, adjusted_mode, &vbios_mode); diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c index f7d421359d564..c1d1ac51d1c20 100644 --- a/drivers/gpu/drm/ast/ast_post.c +++ b/drivers/gpu/drm/ast/ast_post.c @@ -46,7 +46,7 @@ void ast_enable_mmio(struct drm_device *dev) { struct ast_private *ast = dev->dev_private;
- ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa1, 0xff, 0x04); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06); }
From: Hans Ulli Kroll ulli.kroll@googlemail.com
[ Upstream commit 777758888ffe59ef754cc39ab2f275dc277732f4 ]
On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset.
Signed-off-by: Hans Ulli Kroll ulli.kroll@googlemail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/fotg210-hcd.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index e64eb47770c8b..2d5a72c15069e 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1627,6 +1627,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* see what we found out */ temp = check_reset_complete(fotg210, wIndex, status_reg, fotg210_readl(fotg210, status_reg)); + + /* restart schedule */ + fotg210->command |= CMD_RUN; + fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command); }
if (!(temp & (PORT_RESUME|PORT_RESET))) {
From: Adrian Vladu avladu@cloudbasesolutions.com
[ Upstream commit 5912e791f3018de0a007c8cfa9cb38c97d3e5f5c ]
Fixed pep8/flake8 python style code for lsvmbus tool.
The TAB indentation was on purpose ignored (pep8 rule W191) to make sure the code is complying with the Linux code guideline. The following command doe not show any warnings now: pep8 --ignore=W191 lsvmbus flake8 --ignore=W191 lsvmbus
Signed-off-by: Adrian Vladu avladu@cloudbasesolutions.com
Cc: "K. Y. Srinivasan" kys@microsoft.com Cc: Haiyang Zhang haiyangz@microsoft.com Cc: Stephen Hemminger sthemmin@microsoft.com Cc: Sasha Levin sashal@kernel.org Cc: Dexuan Cui decui@microsoft.com Cc: Alessandro Pilotti apilotti@cloudbasesolutions.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/hv/lsvmbus | 75 +++++++++++++++++++++++++++--------------------- 1 file changed, 42 insertions(+), 33 deletions(-)
diff --git a/tools/hv/lsvmbus b/tools/hv/lsvmbus index 55e7374bade0d..099f2c44dbed2 100644 --- a/tools/hv/lsvmbus +++ b/tools/hv/lsvmbus @@ -4,10 +4,10 @@ import os from optparse import OptionParser
+help_msg = "print verbose messages. Try -vv, -vvv for more verbose messages" parser = OptionParser() -parser.add_option("-v", "--verbose", dest="verbose", - help="print verbose messages. Try -vv, -vvv for \ - more verbose messages", action="count") +parser.add_option( + "-v", "--verbose", dest="verbose", help=help_msg, action="count")
(options, args) = parser.parse_args()
@@ -21,27 +21,28 @@ if not os.path.isdir(vmbus_sys_path): exit(-1)
vmbus_dev_dict = { - '{0e0b6031-5213-4934-818b-38d90ced39db}' : '[Operating system shutdown]', - '{9527e630-d0ae-497b-adce-e80ab0175caf}' : '[Time Synchronization]', - '{57164f39-9115-4e78-ab55-382f3bd5422d}' : '[Heartbeat]', - '{a9a0f4e7-5a45-4d96-b827-8a841e8c03e6}' : '[Data Exchange]', - '{35fa2e29-ea23-4236-96ae-3a6ebacba440}' : '[Backup (volume checkpoint)]', - '{34d14be3-dee4-41c8-9ae7-6b174977c192}' : '[Guest services]', - '{525074dc-8985-46e2-8057-a307dc18a502}' : '[Dynamic Memory]', - '{cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a}' : 'Synthetic mouse', - '{f912ad6d-2b17-48ea-bd65-f927a61c7684}' : 'Synthetic keyboard', - '{da0a7802-e377-4aac-8e77-0558eb1073f8}' : 'Synthetic framebuffer adapter', - '{f8615163-df3e-46c5-913f-f2d2f965ed0e}' : 'Synthetic network adapter', - '{32412632-86cb-44a2-9b5c-50d1417354f5}' : 'Synthetic IDE Controller', - '{ba6163d9-04a1-4d29-b605-72e2ffb1dc7f}' : 'Synthetic SCSI Controller', - '{2f9bcc4a-0069-4af3-b76b-6fd0be528cda}' : 'Synthetic fiber channel adapter', - '{8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501}' : 'Synthetic RDMA adapter', - '{44c4f61d-4444-4400-9d52-802e27ede19f}' : 'PCI Express pass-through', - '{276aacf4-ac15-426c-98dd-7521ad3f01fe}' : '[Reserved system device]', - '{f8e65716-3cb3-4a06-9a60-1889c5cccab5}' : '[Reserved system device]', - '{3375baf4-9e15-4b30-b765-67acb10d607b}' : '[Reserved system device]', + '{0e0b6031-5213-4934-818b-38d90ced39db}': '[Operating system shutdown]', + '{9527e630-d0ae-497b-adce-e80ab0175caf}': '[Time Synchronization]', + '{57164f39-9115-4e78-ab55-382f3bd5422d}': '[Heartbeat]', + '{a9a0f4e7-5a45-4d96-b827-8a841e8c03e6}': '[Data Exchange]', + '{35fa2e29-ea23-4236-96ae-3a6ebacba440}': '[Backup (volume checkpoint)]', + '{34d14be3-dee4-41c8-9ae7-6b174977c192}': '[Guest services]', + '{525074dc-8985-46e2-8057-a307dc18a502}': '[Dynamic Memory]', + '{cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a}': 'Synthetic mouse', + '{f912ad6d-2b17-48ea-bd65-f927a61c7684}': 'Synthetic keyboard', + '{da0a7802-e377-4aac-8e77-0558eb1073f8}': 'Synthetic framebuffer adapter', + '{f8615163-df3e-46c5-913f-f2d2f965ed0e}': 'Synthetic network adapter', + '{32412632-86cb-44a2-9b5c-50d1417354f5}': 'Synthetic IDE Controller', + '{ba6163d9-04a1-4d29-b605-72e2ffb1dc7f}': 'Synthetic SCSI Controller', + '{2f9bcc4a-0069-4af3-b76b-6fd0be528cda}': 'Synthetic fiber channel adapter', + '{8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501}': 'Synthetic RDMA adapter', + '{44c4f61d-4444-4400-9d52-802e27ede19f}': 'PCI Express pass-through', + '{276aacf4-ac15-426c-98dd-7521ad3f01fe}': '[Reserved system device]', + '{f8e65716-3cb3-4a06-9a60-1889c5cccab5}': '[Reserved system device]', + '{3375baf4-9e15-4b30-b765-67acb10d607b}': '[Reserved system device]', }
+ def get_vmbus_dev_attr(dev_name, attr): try: f = open('%s/%s/%s' % (vmbus_sys_path, dev_name, attr), 'r') @@ -52,6 +53,7 @@ def get_vmbus_dev_attr(dev_name, attr):
return lines
+ class VMBus_Dev: pass
@@ -66,12 +68,13 @@ for f in os.listdir(vmbus_sys_path):
chn_vp_mapping = get_vmbus_dev_attr(f, 'channel_vp_mapping') chn_vp_mapping = [c.strip() for c in chn_vp_mapping] - chn_vp_mapping = sorted(chn_vp_mapping, - key = lambda c : int(c.split(':')[0])) + chn_vp_mapping = sorted( + chn_vp_mapping, key=lambda c: int(c.split(':')[0]))
- chn_vp_mapping = ['\tRel_ID=%s, target_cpu=%s' % - (c.split(':')[0], c.split(':')[1]) - for c in chn_vp_mapping] + chn_vp_mapping = [ + '\tRel_ID=%s, target_cpu=%s' % + (c.split(':')[0], c.split(':')[1]) for c in chn_vp_mapping + ] d = VMBus_Dev() d.sysfs_path = '%s/%s' % (vmbus_sys_path, f) d.vmbus_id = vmbus_id @@ -85,7 +88,7 @@ for f in os.listdir(vmbus_sys_path): vmbus_dev_list.append(d)
-vmbus_dev_list = sorted(vmbus_dev_list, key = lambda d : int(d.vmbus_id)) +vmbus_dev_list = sorted(vmbus_dev_list, key=lambda d: int(d.vmbus_id))
format0 = '%2s: %s' format1 = '%2s: Class_ID = %s - %s\n%s' @@ -95,9 +98,15 @@ for d in vmbus_dev_list: if verbose == 0: print(('VMBUS ID ' + format0) % (d.vmbus_id, d.dev_desc)) elif verbose == 1: - print (('VMBUS ID ' + format1) % \ - (d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping)) + print( + ('VMBUS ID ' + format1) % + (d.vmbus_id, d.class_id, d.dev_desc, d.chn_vp_mapping) + ) else: - print (('VMBUS ID ' + format2) % \ - (d.vmbus_id, d.class_id, d.dev_desc, \ - d.device_id, d.sysfs_path, d.chn_vp_mapping)) + print( + ('VMBUS ID ' + format2) % + ( + d.vmbus_id, d.class_id, d.dev_desc, + d.device_id, d.sysfs_path, d.chn_vp_mapping + ) + )
From: Adrian Vladu avladu@cloudbasesolutions.com
[ Upstream commit b0995156071b0ff29a5902964a9dc8cfad6f81c0 ]
HyperV KVP and VSS daemons should exit with 0 when the '--help' or '-h' flags are used.
Signed-off-by: Adrian Vladu avladu@cloudbasesolutions.com
Cc: "K. Y. Srinivasan" kys@microsoft.com Cc: Haiyang Zhang haiyangz@microsoft.com Cc: Stephen Hemminger sthemmin@microsoft.com Cc: Sasha Levin sashal@kernel.org Cc: Alessandro Pilotti apilotti@cloudbasesolutions.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/hv/hv_kvp_daemon.c | 2 ++ tools/hv/hv_vss_daemon.c | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c index d7e06fe0270ee..0ce50c319cfd6 100644 --- a/tools/hv/hv_kvp_daemon.c +++ b/tools/hv/hv_kvp_daemon.c @@ -1386,6 +1386,8 @@ int main(int argc, char *argv[]) daemonize = 0; break; case 'h': + print_usage(argv); + exit(0); default: print_usage(argv); exit(EXIT_FAILURE); diff --git a/tools/hv/hv_vss_daemon.c b/tools/hv/hv_vss_daemon.c index b133001727623..c2bb8a3601777 100644 --- a/tools/hv/hv_vss_daemon.c +++ b/tools/hv/hv_vss_daemon.c @@ -229,6 +229,8 @@ int main(int argc, char *argv[]) daemonize = 0; break; case 'h': + print_usage(argv); + exit(0); default: print_usage(argv); exit(EXIT_FAILURE);
linux-stable-mirror@lists.linaro.org
-
Joe Perches -
Sasha Levin