From: Zhaolong Zhang zhangzl2013@126.com
[ Upstream commit c915fb80eaa6194fa9bd0a4487705cd5b0dda2f1 ]
__ext4_journalled_writepage should drop bhs' ref count on error paths
Signed-off-by: Zhaolong Zhang zhangzl2013@126.com Link: https://lore.kernel.org/r/1614678151-70481-1-git-send-email-zhangzl2013@126.... Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/inode.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 296ffe92e250..2fb8f9c687d7 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2072,13 +2072,13 @@ static int __ext4_journalled_writepage(struct page *page, if (!ret) ret = err;
- if (!ext4_has_inline_data(inode)) - ext4_walk_page_buffers(NULL, page_bufs, 0, len, - NULL, bput_one); ext4_set_inode_state(inode, EXT4_STATE_JDATA); out: unlock_page(page); out_no_pagelock: + if (!inline_data && page_bufs) + ext4_walk_page_buffers(NULL, page_bufs, 0, len, + NULL, bput_one); brelse(inode_bh); return ret; }
From: "J. Bruce Fields" bfields@redhat.com
[ Upstream commit 0ddc942394013f08992fc379ca04cffacbbe3dae ]
I think this is unlikely but possible:
svc_authenticate sets rq_authop and calls svcauth_gss_accept. The kmalloc(sizeof(*svcdata), GFP_KERNEL) fails, leaving rq_auth_data NULL, and returning SVC_DENIED.
This causes svc_process_common to go to err_bad_auth, and eventually call svc_authorise. That calls ->release == svcauth_gss_release, which tries to dereference rq_auth_data.
Signed-off-by: J. Bruce Fields bfields@redhat.com Link: https://lore.kernel.org/linux-nfs/3F1B347F-B809-478F-A1E9-0BE98E22B0F0@oracl... Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/auth_gss/svcauth_gss.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index ab086081be9c..a85d78d2bdb7 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1766,11 +1766,14 @@ static int svcauth_gss_release(struct svc_rqst *rqstp) { struct gss_svc_data *gsd = (struct gss_svc_data *)rqstp->rq_auth_data; - struct rpc_gss_wire_cred *gc = &gsd->clcred; + struct rpc_gss_wire_cred *gc; struct xdr_buf *resbuf = &rqstp->rq_res; int stat = -EINVAL; struct sunrpc_net *sn = net_generic(SVC_NET(rqstp), sunrpc_net_id);
+ if (!gsd) + goto out; + gc = &gsd->clcred; if (gc->gc_proc != RPC_GSS_PROC_DATA) goto out; /* Release can be called twice, but we only wrap once. */ @@ -1811,10 +1814,10 @@ svcauth_gss_release(struct svc_rqst *rqstp) if (rqstp->rq_cred.cr_group_info) put_group_info(rqstp->rq_cred.cr_group_info); rqstp->rq_cred.cr_group_info = NULL; - if (gsd->rsci) + if (gsd && gsd->rsci) { cache_put(&gsd->rsci->h, sn->rsc_cache); - gsd->rsci = NULL; - + gsd->rsci = NULL; + } return stat; }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit cfa26ed1f9f885c2fd8f53ca492989d1e16d0199 ]
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5640.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 974e1a449172..63e19a6a9790 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -342,9 +342,9 @@ static bool rt5640_readable_register(struct device *dev, unsigned int reg) }
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit eee51df776bd6cac10a76b2779a9fdee3f622b2b ]
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc- vol-tlv values being off by a factor of 10") which made the exact same change to the rt5670 codec driver.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5651.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 985852fd9723..318a4c9b380f 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -288,9 +288,9 @@ static bool rt5651_readable_register(struct device *dev, unsigned int reg) }
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
From: Benjamin Rood benjaminjrood@gmail.com
[ Upstream commit f86f58e3594fb0ab1993d833d3b9a2496f3c928c ]
According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has the following bit field definitions:
| BITS | FIELD | RW | RESET | DEFINITION | | 15 | RSVD | RO | 0x0 | Reserved | | 14 | RSVD | RW | 0x1 | Reserved | | 13:12 | MAX_GAIN | RW | 0x1 | Max Gain of AVC in expander mode | | 11:10 | RSVD | RO | 0x0 | Reserved | | 9:8 | LBI_RESP | RW | 0x1 | Integrator Response | | 7:6 | RSVD | RO | 0x0 | Reserved | | 5 | HARD_LMT_EN | RW | 0x0 | Enable hard limiter mode | | 4:1 | RSVD | RO | 0x0 | Reserved | | 0 | EN | RW | 0x0 | Enable/Disable AVC |
The original default value written to the DAP_AVC_CTRL register during sgtl5000_i2c_probe() was 0x0510. This would incorrectly write values to bits 4 and 10, which are defined as RESERVED. It would also not set bits 12 and 14 to their correct RESET values of 0x1, and instead set them to 0x0. While the DAP_AVC module is effectively disabled because the EN bit is 0, this default value is still writing invalid values to registers that are marked as read-only and RESERVED as well as not setting bits 12 and 14 to their correct default values as defined by the datasheet.
The correct value that should be written to the DAP_AVC_CTRL register is 0x5100, which configures the register bits to the default values defined by the datasheet, and prevents any writes to bits defined as 'read-only'. Generally speaking, it is best practice to NOT attempt to write values to registers/bits defined as RESERVED, as it generally produces unwanted/undefined behavior, or errors.
Also, all credit for this patch should go to my colleague Dan MacDonald dmacdonald@curbellmedical.com for finding this error in the first place.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Benjamin Rood benjaminjrood@gmail.com Reviewed-by: Fabio Estevam festevam@gmail.com Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/sgtl5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 7c0a06b487f7..17255e9683f5 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -71,7 +71,7 @@ static const struct reg_default sgtl5000_reg_defaults[] = { { SGTL5000_DAP_EQ_BASS_BAND4, 0x002f }, { SGTL5000_DAP_MAIN_CHAN, 0x8000 }, { SGTL5000_DAP_MIX_CHAN, 0x0000 }, - { SGTL5000_DAP_AVC_CTRL, 0x0510 }, + { SGTL5000_DAP_AVC_CTRL, 0x5100 }, { SGTL5000_DAP_AVC_THRESHOLD, 0x1473 }, { SGTL5000_DAP_AVC_ATTACK, 0x0028 }, { SGTL5000_DAP_AVC_DECAY, 0x0050 },
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit bb18c678754ce1514100fb4c0bf6113b5af36c48 ]
Most steps in this table are steps of 3dB (300 centi-dB), so we can simplify the table.
This not only reduces the amount of space it takes inside the kernel, this also makes alsa-lib's mixer code actually accept the table, where as before this change alsa-lib saw the "ADC PGA Gain" control as a control without a dB scale.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/es8316.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index 9ebe77c3784a..57130edaf3ab 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -56,13 +56,8 @@ static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(adc_pga_gain_tlv, 1, 1, TLV_DB_SCALE_ITEM(0, 0, 0), 2, 2, TLV_DB_SCALE_ITEM(250, 0, 0), 3, 3, TLV_DB_SCALE_ITEM(450, 0, 0), - 4, 4, TLV_DB_SCALE_ITEM(700, 0, 0), - 5, 5, TLV_DB_SCALE_ITEM(1000, 0, 0), - 6, 6, TLV_DB_SCALE_ITEM(1300, 0, 0), - 7, 7, TLV_DB_SCALE_ITEM(1600, 0, 0), - 8, 8, TLV_DB_SCALE_ITEM(1800, 0, 0), - 9, 9, TLV_DB_SCALE_ITEM(2100, 0, 0), - 10, 10, TLV_DB_SCALE_ITEM(2400, 0, 0), + 4, 7, TLV_DB_SCALE_ITEM(700, 300, 0), + 8, 10, TLV_DB_SCALE_ITEM(1800, 300, 0), );
static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(hpout_vol_tlv,
From: Lucas Tanure tanureal@opensource.cirrus.com
[ Upstream commit e793c965519b8b7f2fea51a48398405e2a501729 ]
The driver was setting bit clock polarity opposite to intended polarity. Also simplify the code by grouping ADC and DAC clock configurations into a single field.
Signed-off-by: Lucas Tanure tanureal@opensource.cirrus.com Link: https://lore.kernel.org/r/20210305173442.195740-2-tanureal@opensource.cirrus... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 20 ++++++++------------ sound/soc/codecs/cs42l42.h | 11 ++++++----- 2 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 651329bf9743..c7baa19bf317 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -801,27 +801,23 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) /* Bitclock/frame inversion */ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: + asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT; break; case SND_SOC_DAIFMT_NB_IF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_LCPOL_IN_SHIFT; + asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT; + asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT; break; case SND_SOC_DAIFMT_IB_NF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_SCPOL_IN_DAC_SHIFT; break; case SND_SOC_DAIFMT_IB_IF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_LCPOL_IN_SHIFT; - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_SCPOL_IN_DAC_SHIFT; + asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT; break; }
- snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG, - CS42L42_ASP_MODE_MASK | - CS42L42_ASP_SCPOL_IN_DAC_MASK | - CS42L42_ASP_LCPOL_IN_MASK, asp_cfg_val); + snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG, CS42L42_ASP_MODE_MASK | + CS42L42_ASP_SCPOL_MASK | + CS42L42_ASP_LCPOL_MASK, + asp_cfg_val);
return 0; } diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h index 09b0a93203ef..9d04ed75e5c8 100644 --- a/sound/soc/codecs/cs42l42.h +++ b/sound/soc/codecs/cs42l42.h @@ -262,11 +262,12 @@ #define CS42L42_ASP_SLAVE_MODE 0x00 #define CS42L42_ASP_MODE_SHIFT 4 #define CS42L42_ASP_MODE_MASK (1 << CS42L42_ASP_MODE_SHIFT) -#define CS42L42_ASP_SCPOL_IN_DAC_SHIFT 2 -#define CS42L42_ASP_SCPOL_IN_DAC_MASK (1 << CS42L42_ASP_SCPOL_IN_DAC_SHIFT) -#define CS42L42_ASP_LCPOL_IN_SHIFT 0 -#define CS42L42_ASP_LCPOL_IN_MASK (1 << CS42L42_ASP_LCPOL_IN_SHIFT) -#define CS42L42_ASP_POL_INV 1 +#define CS42L42_ASP_SCPOL_SHIFT 2 +#define CS42L42_ASP_SCPOL_MASK (3 << CS42L42_ASP_SCPOL_SHIFT) +#define CS42L42_ASP_SCPOL_NOR 3 +#define CS42L42_ASP_LCPOL_SHIFT 0 +#define CS42L42_ASP_LCPOL_MASK (3 << CS42L42_ASP_LCPOL_SHIFT) +#define CS42L42_ASP_LCPOL_INV 3
#define CS42L42_ASP_FRM_CFG (CS42L42_PAGE_12 + 0x08) #define CS42L42_ASP_STP_SHIFT 4
From: Lucas Tanure tanureal@opensource.cirrus.com
[ Upstream commit 2bdc4f5c6838f7c3feb4fe68e4edbeea158ec0a2 ]
Remove the hard coded 32 bits width and replace with the correct width calculated by params_width.
Signed-off-by: Lucas Tanure tanureal@opensource.cirrus.com Link: https://lore.kernel.org/r/20210305173442.195740-3-tanureal@opensource.cirrus... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 47 ++++++++++++++++++-------------------- sound/soc/codecs/cs42l42.h | 1 - 2 files changed, 22 insertions(+), 26 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index c7baa19bf317..a5bd9cff7085 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -695,24 +695,6 @@ static int cs42l42_pll_config(struct snd_soc_component *component) CS42L42_CLK_OASRC_SEL_MASK, CS42L42_CLK_OASRC_SEL_12 << CS42L42_CLK_OASRC_SEL_SHIFT); - /* channel 1 on low LRCLK, 32 bit */ - snd_soc_component_update_bits(component, - CS42L42_ASP_RX_DAI0_CH1_AP_RES, - CS42L42_ASP_RX_CH_AP_MASK | - CS42L42_ASP_RX_CH_RES_MASK, - (CS42L42_ASP_RX_CH_AP_LOW << - CS42L42_ASP_RX_CH_AP_SHIFT) | - (CS42L42_ASP_RX_CH_RES_32 << - CS42L42_ASP_RX_CH_RES_SHIFT)); - /* Channel 2 on high LRCLK, 32 bit */ - snd_soc_component_update_bits(component, - CS42L42_ASP_RX_DAI0_CH2_AP_RES, - CS42L42_ASP_RX_CH_AP_MASK | - CS42L42_ASP_RX_CH_RES_MASK, - (CS42L42_ASP_RX_CH_AP_HI << - CS42L42_ASP_RX_CH_AP_SHIFT) | - (CS42L42_ASP_RX_CH_RES_32 << - CS42L42_ASP_RX_CH_RES_SHIFT)); if (pll_ratio_table[i].mclk_src_sel == 0) { /* Pass the clock straight through */ snd_soc_component_update_bits(component, @@ -828,14 +810,29 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream, { struct snd_soc_component *component = dai->component; struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component); - int retval; + unsigned int width = (params_width(params) / 8) - 1; + unsigned int val = 0;
cs42l42->srate = params_rate(params); - cs42l42->swidth = params_width(params);
- retval = cs42l42_pll_config(component); + switch(substream->stream) { + case SNDRV_PCM_STREAM_PLAYBACK: + val |= width << CS42L42_ASP_RX_CH_RES_SHIFT; + /* channel 1 on low LRCLK */ + snd_soc_component_update_bits(component, CS42L42_ASP_RX_DAI0_CH1_AP_RES, + CS42L42_ASP_RX_CH_AP_MASK | + CS42L42_ASP_RX_CH_RES_MASK, val); + /* Channel 2 on high LRCLK */ + val |= CS42L42_ASP_RX_CH_AP_HI << CS42L42_ASP_RX_CH_AP_SHIFT; + snd_soc_component_update_bits(component, CS42L42_ASP_RX_DAI0_CH2_AP_RES, + CS42L42_ASP_RX_CH_AP_MASK | + CS42L42_ASP_RX_CH_RES_MASK, val); + break; + default: + break; + }
- return retval; + return cs42l42_pll_config(component); }
static int cs42l42_set_sysclk(struct snd_soc_dai *dai, @@ -900,9 +897,9 @@ static int cs42l42_digital_mute(struct snd_soc_dai *dai, int mute) return 0; }
-#define CS42L42_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE | \ - SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE | \ - SNDRV_PCM_FMTBIT_S32_LE) +#define CS42L42_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE )
static const struct snd_soc_dai_ops cs42l42_ops = { diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h index 9d04ed75e5c8..23b1a63315ca 100644 --- a/sound/soc/codecs/cs42l42.h +++ b/sound/soc/codecs/cs42l42.h @@ -761,7 +761,6 @@ struct cs42l42_private { struct completion pdn_done; u32 sclk; u32 srate; - u32 swidth; u8 plug_state; u8 hs_type; u8 ts_inv;
From: Lucas Tanure tanureal@opensource.cirrus.com
[ Upstream commit 72d904763ae6a8576e7ad034f9da4f0e3c44bf24 ]
The minimum value is 0x3f (-63dB), which also is mute
Signed-off-by: Lucas Tanure tanureal@opensource.cirrus.com Link: https://lore.kernel.org/r/20210305173442.195740-4-tanureal@opensource.cirrus... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index a5bd9cff7085..a8ba518ba043 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -405,7 +405,7 @@ static const struct regmap_config cs42l42_regmap = { };
static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false); -static DECLARE_TLV_DB_SCALE(mixer_tlv, -6200, 100, false); +static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);
static const char * const cs42l42_hpf_freq_text[] = { "1.86Hz", "120Hz", "235Hz", "466Hz" @@ -462,7 +462,7 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = { CS42L42_DAC_HPF_EN_SHIFT, true, false), SOC_DOUBLE_R_TLV("Mixer Volume", CS42L42_MIXER_CHA_VOL, CS42L42_MIXER_CHB_VOL, CS42L42_MIXER_CH_VOL_SHIFT, - 0x3e, 1, mixer_tlv) + 0x3f, 1, mixer_tlv) };
static int cs42l42_hpdrv_evt(struct snd_soc_dapm_widget *w,
From: Lucas Tanure tanureal@opensource.cirrus.com
[ Upstream commit 19325cfea04446bc79b36bffd4978af15f46a00e ]
This delay is part of the power-up sequence defined in the datasheet. A runtime_resume is a power-up so must also include the delay.
Signed-off-by: Lucas Tanure tanureal@opensource.cirrus.com Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs42l42.c | 3 ++- sound/soc/codecs/cs42l42.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index a8ba518ba043..fddfd227a9c0 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -1800,7 +1800,7 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client, dev_dbg(&i2c_client->dev, "Found reset GPIO\n"); gpiod_set_value_cansleep(cs42l42->reset_gpio, 1); } - mdelay(3); + usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
/* Request IRQ */ ret = devm_request_threaded_irq(&i2c_client->dev, @@ -1925,6 +1925,7 @@ static int cs42l42_runtime_resume(struct device *dev) }
gpiod_set_value_cansleep(cs42l42->reset_gpio, 1); + usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
regcache_cache_only(cs42l42->regmap, false); regcache_sync(cs42l42->regmap); diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h index 23b1a63315ca..bcaf4f22408d 100644 --- a/sound/soc/codecs/cs42l42.h +++ b/sound/soc/codecs/cs42l42.h @@ -744,6 +744,7 @@ #define CS42L42_FRAC2_VAL(val) (((val) & 0xff0000) >> 16)
#define CS42L42_NUM_SUPPLIES 5 +#define CS42L42_BOOT_TIME_US 3000
static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = { "VA",
From: Christophe Leroy christophe.leroy@csgroup.eu
[ Upstream commit eed5fae00593ab9d261a0c1ffc1bdb786a87a55a ]
The code relies on constant folding of cpu_has_feature() based on possible and always true values as defined per CPU_FTRS_ALWAYS and CPU_FTRS_POSSIBLE.
Build failure is encountered with for instance book3e_all_defconfig on kisskb in the AMDGPU driver which uses cpu_has_feature(CPU_FTR_VSX_COMP) to decide whether calling kernel_enable_vsx() or not.
The failure is due to cpu_has_feature() not being inlined with that configuration with gcc 4.9.
In the same way as commit acdad8fb4a15 ("powerpc: Force inlining of mmu_has_feature to fix build failure"), for inlining of cpu_has_feature().
Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/b231dfa040ce4cc37f702f5c3a595fdeabfe0462.161537820... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/include/asm/cpu_has_feature.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/cpu_has_feature.h b/arch/powerpc/include/asm/cpu_has_feature.h index 7897d16e0990..727d4b321937 100644 --- a/arch/powerpc/include/asm/cpu_has_feature.h +++ b/arch/powerpc/include/asm/cpu_has_feature.h @@ -7,7 +7,7 @@ #include <linux/bug.h> #include <asm/cputable.h>
-static inline bool early_cpu_has_feature(unsigned long feature) +static __always_inline bool early_cpu_has_feature(unsigned long feature) { return !!((CPU_FTRS_ALWAYS & feature) || (CPU_FTRS_POSSIBLE & cur_cpu_spec->cpu_features & feature)); @@ -46,7 +46,7 @@ static __always_inline bool cpu_has_feature(unsigned long feature) return static_branch_likely(&cpu_feature_keys[i]); } #else -static inline bool cpu_has_feature(unsigned long feature) +static __always_inline bool cpu_has_feature(unsigned long feature) { return early_cpu_has_feature(feature); }
From: Laurent Vivier lvivier@redhat.com
[ Upstream commit beb691e69f4dec7bfe8b81b509848acfd1f0dbf9 ]
vhost_reset_is_le() is vhost_init_is_le(), and in the case of cross-endian legacy, vhost_init_is_le() depends on vq->user_be.
vq->user_be is set by vhost_disable_cross_endian().
But in vhost_vq_reset(), we have:
vhost_reset_is_le(vq); vhost_disable_cross_endian(vq);
And so user_be is used before being set.
To fix that, reverse the lines order as there is no other dependency between them.
Signed-off-by: Laurent Vivier lvivier@redhat.com Link: https://lore.kernel.org/r/20210312140913.788592-1-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/vhost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 98b6eb902df9..732327756ee1 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -322,8 +322,8 @@ static void vhost_vq_reset(struct vhost_dev *dev, vq->kick = NULL; vq->call_ctx = NULL; vq->log_ctx = NULL; - vhost_reset_is_le(vq); vhost_disable_cross_endian(vq); + vhost_reset_is_le(vq); vq->busyloop_timeout = 0; vq->umem = NULL; vq->iotlb = NULL;
From: Lv Yunlong lyl2019@mail.ustc.edu.cn
[ Upstream commit c8c165dea4c8f5ad67b1240861e4f6c5395fa4ac ]
In st_open(), if STp->in_use is true, STp will be freed by scsi_tape_put(). However, STp is still used by DEBC_printk() after. It is better to DEBC_printk() before scsi_tape_put().
Link: https://lore.kernel.org/r/20210311064636.10522-1-lyl2019@mail.ustc.edu.cn Acked-by: Kai Mäkisara kai.makisara@kolumbus.fi Signed-off-by: Lv Yunlong lyl2019@mail.ustc.edu.cn Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 307df2fa39a3..5078db7743cd 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -1265,8 +1265,8 @@ static int st_open(struct inode *inode, struct file *filp) spin_lock(&st_use_lock); if (STp->in_use) { spin_unlock(&st_use_lock); - scsi_tape_put(STp); DEBC_printk(STp, "Device already in use.\n"); + scsi_tape_put(STp); return (-EBUSY); }
From: Alexey Dobriyan adobriyan@gmail.com
[ Upstream commit 5999b9e5b1f8a2f5417b755130919b3ac96f5550 ]
Only half of the file is under include guard because terminating #endif is placed too early.
Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Alexey Dobriyan adobriyan@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_target.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 199d3ba1916d..67a74720c02c 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -124,7 +124,6 @@ (min(1270, ((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD_24XX + \ QLA_TGT_DATASEGS_PER_CONT_24XX*((ql) - 1)) : 0)) #endif -#endif
#define GET_TARGET_ID(ha, iocb) ((HAS_EXTENDED_IDS(ha)) \ ? le16_to_cpu((iocb)->u.isp2x.target.extended) \ @@ -257,6 +256,7 @@ struct ctio_to_2xxx { #ifndef CTIO_RET_TYPE #define CTIO_RET_TYPE 0x17 /* CTIO return entry */ #define ATIO_TYPE7 0x06 /* Accept target I/O entry for 24xx */ +#endif
struct fcp_hdr { uint8_t r_ctl;
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit 2e5848a3d86f03024ae096478bdb892ab3d79131 ]
request_irq() wont accept a name which contains slash so we need to repalce it with something else -- otherwise it will trigger a warning and the entry in /proc/irq/ will not be created since the .name might be used by userspace and we don't want to break userspace, so we are changing the parameters passed to request_irq()
[ 1.630764] name 'pci-das1602/16' [ 1.630950] WARNING: CPU: 0 PID: 181 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0 [ 1.634009] RIP: 0010:__xlate_proc_name+0x93/0xb0 [ 1.639441] Call Trace: [ 1.639976] proc_mkdir+0x18/0x20 [ 1.641946] request_threaded_irq+0xfe/0x160 [ 1.642186] cb_pcidas_auto_attach+0xf4/0x610 [cb_pcidas]
Suggested-by: Ian Abbott abbotti@mev.co.uk Reviewed-by: Ian Abbott abbotti@mev.co.uk Signed-off-by: Tong Zhang ztong0001@gmail.com Link: https://lore.kernel.org/r/20210315195914.4801-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/comedi/drivers/cb_pcidas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 9b716c696477..86cae5d0e983 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -1281,7 +1281,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev, devpriv->amcc + AMCC_OP_REG_INTCSR);
ret = request_irq(pcidev->irq, cb_pcidas_interrupt, IRQF_SHARED, - dev->board_name, dev); + "cb_pcidas", dev); if (ret) { dev_dbg(dev->class_dev, "unable to allocate irq %d\n", pcidev->irq);
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit d2d106fe3badfc3bf0dd3899d1c3f210c7203eab ]
request_irq() wont accept a name which contains slash so we need to repalce it with something else -- otherwise it will trigger a warning and the entry in /proc/irq/ will not be created since the .name might be used by userspace and we don't want to break userspace, so we are changing the parameters passed to request_irq()
[ 1.565966] name 'pci-das6402/16' [ 1.566149] WARNING: CPU: 0 PID: 184 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0 [ 1.568923] RIP: 0010:__xlate_proc_name+0x93/0xb0 [ 1.574200] Call Trace: [ 1.574722] proc_mkdir+0x18/0x20 [ 1.576629] request_threaded_irq+0xfe/0x160 [ 1.576859] auto_attach+0x60a/0xc40 [cb_pcidas64]
Suggested-by: Ian Abbott abbotti@mev.co.uk Reviewed-by: Ian Abbott abbotti@mev.co.uk Signed-off-by: Tong Zhang ztong0001@gmail.com Link: https://lore.kernel.org/r/20210315195814.4692-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/comedi/drivers/cb_pcidas64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index 631a703b345d..91403cc1bbf9 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -4021,7 +4021,7 @@ static int auto_attach(struct comedi_device *dev, init_stc_registers(dev);
retval = request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED, - dev->board_name, dev); + "cb_pcidas64", dev); if (retval) { dev_dbg(dev->class_dev, "unable to allocate irq %u\n", pcidev->irq);
From: Sameer Pujar spujar@nvidia.com
[ Upstream commit dbf54a9534350d6aebbb34f5c1c606b81a4f35dd ]
Simple-card/audio-graph-card drivers do not handle MCLK clock when it is specified in the codec device node. The expectation here is that, the codec should actually own up the MCLK clock and do necessary setup in the driver.
Suggested-by: Mark Brown broonie@kernel.org Suggested-by: Michael Walle michael@walle.cc Signed-off-by: Sameer Pujar spujar@nvidia.com Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5659.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c index 1c1a521c73cb..b331b3ba61a9 100644 --- a/sound/soc/codecs/rt5659.c +++ b/sound/soc/codecs/rt5659.c @@ -3466,12 +3466,17 @@ static int rt5659_set_component_sysclk(struct snd_soc_component *component, int { struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component); unsigned int reg_val = 0; + int ret;
if (freq == rt5659->sysclk && clk_id == rt5659->sysclk_src) return 0;
switch (clk_id) { case RT5659_SCLK_S_MCLK: + ret = clk_set_rate(rt5659->mclk, freq); + if (ret) + return ret; + reg_val |= RT5659_SCLK_SRC_MCLK; break; case RT5659_SCLK_S_PLL1:
From: Manaf Meethalavalappu Pallikunhi manafm@codeaurora.org
[ Upstream commit 2046a24ae121cd107929655a6aaf3b8c5beea01f ]
There is a possible chance that some cooling device stats buffer allocation fails due to very high cooling device max state value. Later cooling device update sysfs can try to access stats data for the same cooling device. It will lead to NULL pointer dereference issue.
Add a NULL pointer check before accessing thermal cooling device stats data. It fixes the following bug
[ 26.812833] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 27.122960] Call trace: [ 27.122963] do_raw_spin_lock+0x18/0xe8 [ 27.122966] _raw_spin_lock+0x24/0x30 [ 27.128157] thermal_cooling_device_stats_update+0x24/0x98 [ 27.128162] cur_state_store+0x88/0xb8 [ 27.128166] dev_attr_store+0x40/0x58 [ 27.128169] sysfs_kf_write+0x50/0x68 [ 27.133358] kernfs_fop_write+0x12c/0x1c8 [ 27.133362] __vfs_write+0x54/0x160 [ 27.152297] vfs_write+0xcc/0x188 [ 27.157132] ksys_write+0x78/0x108 [ 27.162050] ksys_write+0xf8/0x108 [ 27.166968] __arm_smccc_hvc+0x158/0x4b0 [ 27.166973] __arm_smccc_hvc+0x9c/0x4b0 [ 27.186005] el0_svc+0x8/0xc
Signed-off-by: Manaf Meethalavalappu Pallikunhi manafm@codeaurora.org Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Link: https://lore.kernel.org/r/1607367181-24589-1-git-send-email-manafm@codeauror... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/thermal_sysfs.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c index aa99edb4dff7..4dce4a8f71ed 100644 --- a/drivers/thermal/thermal_sysfs.c +++ b/drivers/thermal/thermal_sysfs.c @@ -770,6 +770,9 @@ void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev, { struct cooling_dev_stats *stats = cdev->stats;
+ if (!stats) + return; + spin_lock(&stats->lock);
if (stats->state == new_state)
From: Waiman Long longman@redhat.com
[ Upstream commit 5de2055d31ea88fd9ae9709ac95c372a505a60fa ]
The use_ww_ctx flag is passed to mutex_optimistic_spin(), but the function doesn't use it. The frequent use of the (use_ww_ctx && ww_ctx) combination is repetitive.
In fact, ww_ctx should not be used at all if !use_ww_ctx. Simplify ww_mutex code by dropping use_ww_ctx from mutex_optimistic_spin() an clear ww_ctx if !use_ww_ctx. In this way, we can replace (use_ww_ctx && ww_ctx) by just (ww_ctx).
Signed-off-by: Waiman Long longman@redhat.com Signed-off-by: Ingo Molnar mingo@kernel.org Acked-by: Davidlohr Bueso dbueso@suse.de Link: https://lore.kernel.org/r/20210316153119.13802-2-longman@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/locking/mutex.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c index 3f8a35104285..b3da782cdfbd 100644 --- a/kernel/locking/mutex.c +++ b/kernel/locking/mutex.c @@ -609,7 +609,7 @@ static inline int mutex_can_spin_on_owner(struct mutex *lock) */ static __always_inline bool mutex_optimistic_spin(struct mutex *lock, struct ww_acquire_ctx *ww_ctx, - const bool use_ww_ctx, struct mutex_waiter *waiter) + struct mutex_waiter *waiter) { if (!waiter) { /* @@ -685,7 +685,7 @@ mutex_optimistic_spin(struct mutex *lock, struct ww_acquire_ctx *ww_ctx, #else static __always_inline bool mutex_optimistic_spin(struct mutex *lock, struct ww_acquire_ctx *ww_ctx, - const bool use_ww_ctx, struct mutex_waiter *waiter) + struct mutex_waiter *waiter) { return false; } @@ -905,10 +905,13 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, struct ww_mutex *ww; int ret;
+ if (!use_ww_ctx) + ww_ctx = NULL; + might_sleep();
ww = container_of(lock, struct ww_mutex, base); - if (use_ww_ctx && ww_ctx) { + if (ww_ctx) { if (unlikely(ww_ctx == READ_ONCE(ww->ctx))) return -EALREADY;
@@ -925,10 +928,10 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, mutex_acquire_nest(&lock->dep_map, subclass, 0, nest_lock, ip);
if (__mutex_trylock(lock) || - mutex_optimistic_spin(lock, ww_ctx, use_ww_ctx, NULL)) { + mutex_optimistic_spin(lock, ww_ctx, NULL)) { /* got the lock, yay! */ lock_acquired(&lock->dep_map, ip); - if (use_ww_ctx && ww_ctx) + if (ww_ctx) ww_mutex_set_context_fastpath(ww, ww_ctx); preempt_enable(); return 0; @@ -939,7 +942,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, * After waiting to acquire the wait_lock, try again. */ if (__mutex_trylock(lock)) { - if (use_ww_ctx && ww_ctx) + if (ww_ctx) __ww_mutex_check_waiters(lock, ww_ctx);
goto skip_wait; @@ -992,7 +995,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, goto err; }
- if (use_ww_ctx && ww_ctx) { + if (ww_ctx) { ret = __ww_mutex_check_kill(lock, &waiter, ww_ctx); if (ret) goto err; @@ -1005,7 +1008,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, * ww_mutex needs to always recheck its position since its waiter * list is not FIFO ordered. */ - if ((use_ww_ctx && ww_ctx) || !first) { + if (ww_ctx || !first) { first = __mutex_waiter_is_first(lock, &waiter); if (first) __mutex_set_flag(lock, MUTEX_FLAG_HANDOFF); @@ -1018,7 +1021,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, * or we must see its unlock and acquire. */ if (__mutex_trylock(lock) || - (first && mutex_optimistic_spin(lock, ww_ctx, use_ww_ctx, &waiter))) + (first && mutex_optimistic_spin(lock, ww_ctx, &waiter))) break;
spin_lock(&lock->wait_lock); @@ -1027,7 +1030,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, acquired: __set_current_state(TASK_RUNNING);
- if (use_ww_ctx && ww_ctx) { + if (ww_ctx) { /* * Wound-Wait; we stole the lock (!first_waiter), check the * waiters as anyone might want to wound us. @@ -1047,7 +1050,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, /* got the lock - cleanup and rejoice! */ lock_acquired(&lock->dep_map, ip);
- if (use_ww_ctx && ww_ctx) + if (ww_ctx) ww_mutex_lock_acquired(ww, ww_ctx);
spin_unlock(&lock->wait_lock);
From: "zhangyi (F)" yi.zhang@huawei.com
[ Upstream commit 5dccdc5a1916d4266edd251f20bbbb113a5c495f ]
In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into directory, it ends up dropping new created whiteout inode under the running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode under running transaction"), we follow the assumptions that evict() does not get called from a transaction context but in ext4_rename() it breaks this suggestion. Although it's not a real problem, better to obey it, so this patch add inode to orphan list and stop transaction before final iput().
Signed-off-by: zhangyi (F) yi.zhang@huawei.com Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/namei.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 0dde6385a125..d6cc013098e1 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -3599,14 +3599,14 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry, */ retval = -ENOENT; if (!old.bh || le32_to_cpu(old.de->inode) != old.inode->i_ino) - goto end_rename; + goto release_bh;
new.bh = ext4_find_entry(new.dir, &new.dentry->d_name, &new.de, &new.inlined); if (IS_ERR(new.bh)) { retval = PTR_ERR(new.bh); new.bh = NULL; - goto end_rename; + goto release_bh; } if (new.bh) { if (!new.inode) { @@ -3623,15 +3623,13 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry, handle = ext4_journal_start(old.dir, EXT4_HT_DIR, credits); if (IS_ERR(handle)) { retval = PTR_ERR(handle); - handle = NULL; - goto end_rename; + goto release_bh; } } else { whiteout = ext4_whiteout_for_rename(&old, credits, &handle); if (IS_ERR(whiteout)) { retval = PTR_ERR(whiteout); - whiteout = NULL; - goto end_rename; + goto release_bh; } }
@@ -3739,16 +3737,18 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry, ext4_setent(handle, &old, old.inode->i_ino, old_file_type); drop_nlink(whiteout); + ext4_orphan_add(handle, whiteout); } unlock_new_inode(whiteout); + ext4_journal_stop(handle); iput(whiteout); - + } else { + ext4_journal_stop(handle); } +release_bh: brelse(old.dir_bh); brelse(old.bh); brelse(new.bh); - if (handle) - ext4_journal_stop(handle); return retval; }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin