Currently the functions use to check both chip ready and good. But the chip ready is not enough to check the operation status. So change this to check the chip good instead of this. About the retry functions to make sure the error handling remain it.

Signed-off-by: Tokunori Ikegami ikegami@allied-telesis.co.jp Reviewed-by: Joakim Tjernlund Joakim.Tjernlund@infinera.com Cc: Chris Packham chris.packham@alliedtelesis.co.nz Cc: Brian Norris computersforpeace@gmail.com Cc: David Woodhouse dwmw2@infradead.org Cc: Boris Brezillon boris.brezillon@free-electrons.com Cc: Marek Vasut marek.vasut@gmail.com Cc: Richard Weinberger richard@nod.at Cc: Cyrille Pitchen cyrille.pitchen@wedev4u.fr Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com --- drivers/mtd/chips/cfi_cmdset_0002.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 13ce64362db8..2a39dc3a4760 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -2296,12 +2296,13 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) chip->erase_suspended = 0; }

- if (chip_ready(map, adr)) + if (chip_good(map, adr, map_word_ff(map))) break;

if (time_after(jiffies, timeo)) { printk(KERN_WARNING "MTD %s(): software timeout\n", __func__ ); + ret = -EIO; break; }

@@ -2309,15 +2310,15 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) UDELAY(map, chip, adr, 1000000/HZ); } /* Did we succeed? */ - if (!chip_good(map, adr, map_word_ff(map))) { + if (ret) { /* reset on all failures. */ map_write( map, CMD(0xF0), chip->start ); /* FIXME - should have reset delay before continuing */

- if (++retry_cnt <= MAX_RETRIES) + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; goto retry; - - ret = -EIO; + } }

chip->state = FL_READY; @@ -2391,7 +2392,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, chip->erase_suspended = 0; }

- if (chip_ready(map, adr)) { + if (chip_good(map, adr, map_word_ff(map))) { xip_enable(map, chip, adr); break; } @@ -2400,6 +2401,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, xip_enable(map, chip, adr); printk(KERN_WARNING "MTD %s(): software timeout\n", __func__ ); + ret = -EIO; break; }

@@ -2407,15 +2409,15 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, UDELAY(map, chip, adr, 1000000/HZ); } /* Did we succeed? */ - if (!chip_good(map, adr, map_word_ff(map))) { + if (ret) { /* reset on all failures. */ map_write( map, CMD(0xF0), chip->start ); /* FIXME - should have reset delay before continuing */

- if (++retry_cnt <= MAX_RETRIES) + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; goto retry; - - ret = -EIO; + } }

chip->state = FL_READY;