From: Marek Szyprowski m.szyprowski@samsung.com

[ Upstream commit 83a196773b8bc6702f49df1eddc848180e350340 ]

Analogix_dp driver acquires all its resources in the ->bind() callback, what is a bit against the component driver based approach, where the driver initialization is split into a probe(), where all resources are gathered, and a bind(), where all objects are created and a compound driver is initialized.

Extract all the resource related operations to analogix_dp_probe() and analogix_dp_remove(), then call them before/after registration of the device components from the main Exynos DP and Rockchip DP drivers. Also move the plat_data initialization to the probe() to make it available for the analogix_dp_probe() function.

This fixes the multiple calls to the bind() of the DRM compound driver when the DP PHY driver is not yet loaded/probed:

[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm]) exynos-dp 145b0000.dp-controller: no DP phy configured exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517 exynos-drm exynos-drm: master bind failed: -517 ... [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Console: switching to colour frame buffer device 170x48 exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 ...

Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Acked-by: Andy Yan andy.yan@rock-chips.com Reviewed-by: Andrzej Hajda a.hajda@samsung.com Signed-off-by: Andrzej Hajda a.hajda@samsung.com Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szypr... Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/bridge/analogix/analogix_dp_core.c | 33 +++++++++++------ drivers/gpu/drm/exynos/exynos_dp.c | 29 ++++++++------- .../gpu/drm/rockchip/analogix_dp-rockchip.c | 36 ++++++++++--------- include/drm/bridge/analogix_dp.h | 5 +-- 4 files changed, 61 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index 6effe532f8200..461eff94d2767 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -1636,8 +1636,7 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux, }

struct analogix_dp_device * -analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, - struct analogix_dp_plat_data *plat_data) +analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data) { struct platform_device *pdev = to_platform_device(dev); struct analogix_dp_device *dp; @@ -1740,22 +1739,30 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, irq_flags, "analogix-dp", dp); if (ret) { dev_err(&pdev->dev, "failed to request irq\n"); - goto err_disable_pm_runtime; + return ERR_PTR(ret); } disable_irq(dp->irq);

+ return dp; +} +EXPORT_SYMBOL_GPL(analogix_dp_probe); + +int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev) +{ + int ret; + dp->drm_dev = drm_dev; dp->encoder = dp->plat_data->encoder;

dp->aux.name = "DP-AUX"; dp->aux.transfer = analogix_dpaux_transfer; - dp->aux.dev = &pdev->dev; + dp->aux.dev = dp->dev;

ret = drm_dp_aux_register(&dp->aux); if (ret) - return ERR_PTR(ret); + return ret;

- pm_runtime_enable(dev); + pm_runtime_enable(dp->dev);

ret = analogix_dp_create_bridge(drm_dev, dp); if (ret) { @@ -1763,13 +1770,12 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, goto err_disable_pm_runtime; }

- return dp; + return 0;

err_disable_pm_runtime: + pm_runtime_disable(dp->dev);

- pm_runtime_disable(dev); - - return ERR_PTR(ret); + return ret; } EXPORT_SYMBOL_GPL(analogix_dp_bind);

@@ -1786,10 +1792,15 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)

drm_dp_aux_unregister(&dp->aux); pm_runtime_disable(dp->dev); - clk_disable_unprepare(dp->clock); } EXPORT_SYMBOL_GPL(analogix_dp_unbind);

+void analogix_dp_remove(struct analogix_dp_device *dp) +{ + clk_disable_unprepare(dp->clock); +} +EXPORT_SYMBOL_GPL(analogix_dp_remove); + #ifdef CONFIG_PM int analogix_dp_suspend(struct analogix_dp_device *dp) { diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c index 4785885c0f4f9..065a1cb2a5444 100644 --- a/drivers/gpu/drm/exynos/exynos_dp.c +++ b/drivers/gpu/drm/exynos/exynos_dp.c @@ -158,15 +158,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data) struct drm_device *drm_dev = data; int ret;

- dp->dev = dev; dp->drm_dev = drm_dev;

- dp->plat_data.dev_type = EXYNOS_DP; - dp->plat_data.power_on_start = exynos_dp_poweron; - dp->plat_data.power_off = exynos_dp_poweroff; - dp->plat_data.attach = exynos_dp_bridge_attach; - dp->plat_data.get_modes = exynos_dp_get_modes; - if (!dp->plat_data.panel && !dp->ptn_bridge) { ret = exynos_dp_dt_parse_panel(dp); if (ret) @@ -184,13 +177,11 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)

dp->plat_data.encoder = encoder;

- dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data); - if (IS_ERR(dp->adp)) { + ret = analogix_dp_bind(dp->adp, dp->drm_dev); + if (ret) dp->encoder.funcs->destroy(&dp->encoder); - return PTR_ERR(dp->adp); - }

- return 0; + return ret; }

static void exynos_dp_unbind(struct device *dev, struct device *master, @@ -221,6 +212,7 @@ static int exynos_dp_probe(struct platform_device *pdev) if (!dp) return -ENOMEM;

+ dp->dev = dev; /* * We just use the drvdata until driver run into component * add function, and then we would set drvdata to null, so @@ -246,16 +238,29 @@ static int exynos_dp_probe(struct platform_device *pdev)

/* The remote port can be either a panel or a bridge */ dp->plat_data.panel = panel; + dp->plat_data.dev_type = EXYNOS_DP; + dp->plat_data.power_on_start = exynos_dp_poweron; + dp->plat_data.power_off = exynos_dp_poweroff; + dp->plat_data.attach = exynos_dp_bridge_attach; + dp->plat_data.get_modes = exynos_dp_get_modes; dp->plat_data.skip_connector = !!bridge; + dp->ptn_bridge = bridge;

out: + dp->adp = analogix_dp_probe(dev, &dp->plat_data); + if (IS_ERR(dp->adp)) + return PTR_ERR(dp->adp); + return component_add(&pdev->dev, &exynos_dp_ops); }

static int exynos_dp_remove(struct platform_device *pdev) { + struct exynos_dp_device *dp = platform_get_drvdata(pdev); + component_del(&pdev->dev, &exynos_dp_ops); + analogix_dp_remove(dp->adp);

return 0; } diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index f38f5e113c6b3..ce98c08aa8b44 100644 --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c @@ -325,15 +325,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master, void *data) { struct rockchip_dp_device *dp = dev_get_drvdata(dev); - const struct rockchip_dp_chip_data *dp_data; struct drm_device *drm_dev = data; int ret;

- dp_data = of_device_get_match_data(dev); - if (!dp_data) - return -ENODEV; - - dp->data = dp_data; dp->drm_dev = drm_dev;

ret = rockchip_dp_drm_create_encoder(dp); @@ -344,16 +338,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,

dp->plat_data.encoder = &dp->encoder;

- dp->plat_data.dev_type = dp->data->chip_type; - dp->plat_data.power_on_start = rockchip_dp_poweron_start; - dp->plat_data.power_off = rockchip_dp_powerdown; - dp->plat_data.get_modes = rockchip_dp_get_modes; - - dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data); - if (IS_ERR(dp->adp)) { - ret = PTR_ERR(dp->adp); + ret = analogix_dp_bind(dp->adp, drm_dev); + if (ret) goto err_cleanup_encoder; - }

return 0; err_cleanup_encoder: @@ -368,8 +355,6 @@ static void rockchip_dp_unbind(struct device *dev, struct device *master,

analogix_dp_unbind(dp->adp); dp->encoder.funcs->destroy(&dp->encoder); - - dp->adp = ERR_PTR(-ENODEV); }

static const struct component_ops rockchip_dp_component_ops = { @@ -380,10 +365,15 @@ static const struct component_ops rockchip_dp_component_ops = { static int rockchip_dp_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + const struct rockchip_dp_chip_data *dp_data; struct drm_panel *panel = NULL; struct rockchip_dp_device *dp; int ret;

+ dp_data = of_device_get_match_data(dev); + if (!dp_data) + return -ENODEV; + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL); if (ret < 0) return ret; @@ -394,7 +384,12 @@ static int rockchip_dp_probe(struct platform_device *pdev)

dp->dev = dev; dp->adp = ERR_PTR(-ENODEV); + dp->data = dp_data; dp->plat_data.panel = panel; + dp->plat_data.dev_type = dp->data->chip_type; + dp->plat_data.power_on_start = rockchip_dp_poweron_start; + dp->plat_data.power_off = rockchip_dp_powerdown; + dp->plat_data.get_modes = rockchip_dp_get_modes;

ret = rockchip_dp_of_probe(dp); if (ret < 0) @@ -402,12 +397,19 @@ static int rockchip_dp_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, dp);

+ dp->adp = analogix_dp_probe(dev, &dp->plat_data); + if (IS_ERR(dp->adp)) + return PTR_ERR(dp->adp); + return component_add(dev, &rockchip_dp_component_ops); }

static int rockchip_dp_remove(struct platform_device *pdev) { + struct rockchip_dp_device *dp = platform_get_drvdata(pdev); + component_del(&pdev->dev, &rockchip_dp_component_ops); + analogix_dp_remove(dp->adp);

return 0; } diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h index 7aa2f93da49ca..b0dcc07334a1e 100644 --- a/include/drm/bridge/analogix_dp.h +++ b/include/drm/bridge/analogix_dp.h @@ -42,9 +42,10 @@ int analogix_dp_resume(struct analogix_dp_device *dp); int analogix_dp_suspend(struct analogix_dp_device *dp);

struct analogix_dp_device * -analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, - struct analogix_dp_plat_data *plat_data); +analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data); +int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev); void analogix_dp_unbind(struct analogix_dp_device *dp); +void analogix_dp_remove(struct analogix_dp_device *dp);

int analogix_dp_start_crc(struct drm_connector *connector); int analogix_dp_stop_crc(struct drm_connector *connector);

From: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com

[ Upstream commit 482db55ae87f3749db05810a38b1d618dfd4407c ]

Function soc_tplg_create_tlv can fail, so we should check if it succeded or not and proceed appropriately.

Signed-off-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200327204729.397-3-amadeuszx.slawinski@linux.int... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-topology.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 7a7c427de95d6..5d974a36cdc92 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -894,7 +894,13 @@ static int soc_tplg_dmixer_create(struct soc_tplg *tplg, unsigned int count, }

/* create any TLV data */ - soc_tplg_create_tlv(tplg, &kc, &mc->hdr); + err = soc_tplg_create_tlv(tplg, &kc, &mc->hdr); + if (err < 0) { + dev_err(tplg->dev, "ASoC: failed to create TLV %s\n", + mc->hdr.name); + kfree(sm); + continue; + }

/* pass control to driver for optional further init */ err = soc_tplg_init_kcontrol(tplg, &kc, @@ -1355,7 +1361,13 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_dmixer_create( }

/* create any TLV data */ - soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr); + err = soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr); + if (err < 0) { + dev_err(tplg->dev, "ASoC: failed to create TLV %s\n", + mc->hdr.name); + kfree(sm); + continue; + }

/* pass control to driver for optional further init */ err = soc_tplg_init_kcontrol(tplg, &kc[i],

From: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com

[ Upstream commit 6856e887eae3efc0fe56899cb3f969fe063171c5 ]

Function soc_tplg_add_route can propagate error code from callback, we should check its return value and handle fail in correct way.

Signed-off-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200327204729.397-5-amadeuszx.slawinski@linux.int... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-topology.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index c86c3ea533f68..aa7714f2b78fd 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -1284,7 +1284,9 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg, routes[i]->dobj.index = tplg->index; list_add(&routes[i]->dobj.list, &tplg->comp->dobj_list);

- soc_tplg_add_route(tplg, routes[i]); + ret = soc_tplg_add_route(tplg, routes[i]); + if (ret < 0) + break;

/* add route, but keep going if some fail */ snd_soc_dapm_add_routes(dapm, routes[i], 1);

From: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com

[ Upstream commit dd8e871d4e560eeb8d22af82dde91457ad835a63 ]

Function soc_tplg_dai_config can fail, check for and handle possible failure.

Signed-off-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200327204729.397-7-amadeuszx.slawinski@linux.int... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-topology.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index ca0ac5372b293..e6a17ab433eea 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -2524,7 +2524,7 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg, { struct snd_soc_tplg_dai *dai; int count; - int i; + int i, ret;

count = le32_to_cpu(hdr->count);

@@ -2539,7 +2539,12 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg, return -EINVAL; }

- soc_tplg_dai_config(tplg, dai); + ret = soc_tplg_dai_config(tplg, dai); + if (ret < 0) { + dev_err(tplg->dev, "ASoC: failed to configure DAI\n"); + return ret; + } + tplg->pos += (sizeof(*dai) + le32_to_cpu(dai->priv.size)); }

From: Sandipan Das sandipan@linux.ibm.com

[ Upstream commit 24c3f063c57b2a8ae21b259bcfa7690e2eb56dd9 ]

Independent builds of the vm selftests is currently broken because commit 7549b3364201 ("selftests: vm: Build/Run 64bit tests only on 64bit arch") overrides the value of ARCH with the machine name from uname. This does not always match the architecture names used for tasks like header installation.

E.g. for building tests on powerpc64, we need ARCH=powerpc and not ARCH=ppc64 or ARCH=ppc64le. Otherwise, the build fails as shown below.

$ uname -m ppc64le

$ make -C tools/testing/selftests/vm make: Entering directory '/home/sandipan/linux/tools/testing/selftests/vm' make --no-builtin-rules ARCH=ppc64le -C ../../../.. headers_install make[1]: Entering directory '/home/sandipan/linux' Makefile:653: arch/ppc64le/Makefile: No such file or directory make[1]: *** No rule to make target 'arch/ppc64le/Makefile'. Stop. make[1]: Leaving directory '/home/sandipan/linux' ../lib.mk:50: recipe for target 'khdr' failed make: *** [khdr] Error 2 make: Leaving directory '/home/sandipan/linux/tools/testing/selftests/vm'

Fixes: 7549b3364201 ("selftests: vm: Build/Run 64bit tests only on 64bit arch") Signed-off-by: Sandipan Das sandipan@linux.ibm.com Tested-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/vm/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 7f9a8a8c31da9..3f2e2f0ccbc9a 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for vm selftests uname_M := $(shell uname -m 2>/dev/null || echo not) -ARCH ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/') +MACHINE ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')

CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS) LDLIBS = -lrt @@ -19,7 +19,7 @@ TEST_GEN_FILES += thuge-gen TEST_GEN_FILES += transhuge-stress TEST_GEN_FILES += userfaultfd

-ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64)) +ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64)) TEST_GEN_FILES += va_128TBswitch TEST_GEN_FILES += virtual_address_range endif

From: Jarkko Sakkinen jarkko.sakkinen@linux.intel.com

[ Upstream commit aaa2d92efe1f972567f1691b423ab8dc606ab3a9 ]

This reverts commit b32694cd0724d4ceca2c62cc7c3d3a8d1ffa11fc.

The original comment was neither reviewed nor tested. Thus, this the *only* possible action to take.

Cc: Nikita Sobolev Nikita.Sobolev@synopsys.com Signed-off-by: Jarkko Sakkinen jarkko.sakkinen@linux.intel.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/tpm2/test_smoke.sh | 13 ++----------- tools/testing/selftests/tpm2/test_space.sh | 9 +-------- 2 files changed, 3 insertions(+), 19 deletions(-)

diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index b630c7b5950a9..8155c2ea7ccbb 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -1,17 +1,8 @@ #!/bin/bash # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) -self.flags = flags

-# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - - -if [ -f /dev/tpm0 ] ; then - python -m unittest -v tpm2_tests.SmokeTest - python -m unittest -v tpm2_tests.AsyncTest -else - exit $ksft_skip -fi +python -m unittest -v tpm2_tests.SmokeTest +python -m unittest -v tpm2_tests.AsyncTest

CLEAR_CMD=$(which tpm2_clear) if [ -n $CLEAR_CMD ]; then diff --git a/tools/testing/selftests/tpm2/test_space.sh b/tools/testing/selftests/tpm2/test_space.sh index 180b469c53b47..a6f5e346635e5 100755 --- a/tools/testing/selftests/tpm2/test_space.sh +++ b/tools/testing/selftests/tpm2/test_space.sh @@ -1,11 +1,4 @@ #!/bin/bash # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)

-# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - -if [ -f /dev/tpmrm0 ] ; then - python -m unittest -v tpm2_tests.SpaceTest -else - exit $ksft_skip -fi +python -m unittest -v tpm2_tests.SpaceTest

From: Vasily Khoruzhick anarsoul@gmail.com

[ Upstream commit 1e8a6ce9186dbf342eebc07cf14cae5e82164e03 ]

Some drivers (e.g. sun4i-drm) need this info to decide whether they need to enable dithering. Currently driver reports what panel supports and if panel supports 8 we don't get dithering enabled.

Hardcode BPC to 6 for now since that's the only BPC that driver supports.

Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support") Signed-off-by: Vasily Khoruzhick anarsoul@gmail.com Acked-by: Jernej Skrabec jernej.skrabec@siol.net Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net Link: https://patchwork.freedesktop.org/patch/msgid/20200329222253.2941405-1-anars... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c index 526507102c1ea..8d32fea84c75e 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c @@ -485,6 +485,9 @@ static int anx6345_get_modes(struct drm_connector *connector)

num_modes += drm_add_edid_modes(connector, anx6345->edid);

+ /* Driver currently supports only 6bpc */ + connector->display_info.bpc = 6; + unlock: if (power_off) anx6345_poweroff(anx6345);

From: Sebastian Reichel sebastian.reichel@collabora.com

[ Upstream commit aa7812737f2877e192d57626cbe8825cc7cf6de9 ]

As mentioned slightly out of patch context in the code, there is no reset routine for the chip. On boards where the chip is supplied by a fixed regulator, it might not even be resetted during (e.g. watchdog) reboot and can be in any state.

If the device is probed with VAG enabled, the driver's probe routine will generate a loud pop sound when ANA_POWER is being programmed. Avoid this by properly disabling just the VAG bit and waiting the required power down time.

Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Reviewed-by: Fabio Estevam festivem@gmail.com Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabor... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/sgtl5000.c | 34 ++++++++++++++++++++++++++++++++++ sound/soc/codecs/sgtl5000.h | 1 + 2 files changed, 35 insertions(+)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index d5130193b4a2f..e8a8bf7b4ffed 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1653,6 +1653,40 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, dev_err(&client->dev, "Error %d initializing CHIP_CLK_CTRL\n", ret);

+ /* Mute everything to avoid pop from the following power-up */ + ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL, + SGTL5000_CHIP_ANA_CTRL_DEFAULT); + if (ret) { + dev_err(&client->dev, + "Error %d muting outputs via CHIP_ANA_CTRL\n", ret); + goto disable_clk; + } + + /* + * If VAG is powered-on (e.g. from previous boot), it would be disabled + * by the write to ANA_POWER in later steps of the probe code. This + * may create a loud pop even with all outputs muted. The proper way + * to circumvent this is disabling the bit first and waiting the proper + * cool-down time. + */ + ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value); + if (ret) { + dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret); + goto disable_clk; + } + if (value & SGTL5000_VAG_POWERUP) { + ret = regmap_update_bits(sgtl5000->regmap, + SGTL5000_CHIP_ANA_POWER, + SGTL5000_VAG_POWERUP, + 0); + if (ret) { + dev_err(&client->dev, "Error %d disabling VAG\n", ret); + goto disable_clk; + } + + msleep(SGTL5000_VAG_POWERDOWN_DELAY); + } + /* Follow section 2.2.1.1 of AN3663 */ ana_pwr = SGTL5000_ANA_POWER_DEFAULT; if (sgtl5000->num_supplies <= VDDD) { diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h index a4bf4bca95bf7..56ec5863f2507 100644 --- a/sound/soc/codecs/sgtl5000.h +++ b/sound/soc/codecs/sgtl5000.h @@ -233,6 +233,7 @@ /* * SGTL5000_CHIP_ANA_CTRL */ +#define SGTL5000_CHIP_ANA_CTRL_DEFAULT 0x0133 #define SGTL5000_LINE_OUT_MUTE 0x0100 #define SGTL5000_HP_SEL_MASK 0x0040 #define SGTL5000_HP_SEL_SHIFT 6

From: Thinh Nguyen Thinh.Nguyen@synopsys.com

[ Upstream commit d94ea5319813658ad5861d161ae16a194c2abf88 ]

Currently the calculation of max packet size limit for IN endpoints is too restrictive. This prevents a matching of a capable hardware endpoint during configuration. Below is the minimum recommended HW configuration to support a particular endpoint setup from the databook:

For OUT endpoints, the databook recommended the minimum RxFIFO size to be at least 3x MaxPacketSize + 3x setup packets size (8 bytes each) + clock crossing margin (16 bytes).

For IN endpoints, the databook recommended the minimum TxFIFO size to be at least 3x MaxPacketSize for endpoints that support burst. If the endpoint doesn't support burst or when the device is operating in USB 2.0 mode, a minimum TxFIFO size of 2x MaxPacketSize is recommended.

Base on these recommendations, we can calculate the MaxPacketSize limit of each endpoint. This patch revises the IN endpoint MaxPacketSize limit and also sets the MaxPacketSize limit for OUT endpoints.

Reference: Databook 3.30a section 3.2.2 and 3.2.3

Signed-off-by: Thinh Nguyen thinhn@synopsys.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/core.h | 4 +++ drivers/usb/dwc3/gadget.c | 52 ++++++++++++++++++++++++++++++--------- 2 files changed, 45 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 3ecc69c5b150f..ce4acbf7fef90 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -310,6 +310,10 @@ #define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff) #define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)

+/* Global RX Fifo Size Register */ +#define DWC31_GRXFIFOSIZ_RXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */ +#define DWC3_GRXFIFOSIZ_RXFDEP(n) ((n) & 0xffff) + /* Global Event Size Registers */ #define DWC3_GEVNTSIZ_INTMASK BIT(31) #define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c4be4631937a8..bc1cf6d0412a3 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2223,7 +2223,6 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; int mdwidth; - int kbytes; int size;

mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); @@ -2239,17 +2238,17 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) /* FIFO Depth is in MDWDITH bytes. Multiply */ size *= mdwidth;

- kbytes = size / 1024; - if (kbytes == 0) - kbytes = 1; - /* - * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for - * internal overhead. We don't really know how these are used, - * but documentation say it exists. + * To meet performance requirement, a minimum TxFIFO size of 3x + * MaxPacketSize is recommended for endpoints that support burst and a + * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't + * support burst. Use those numbers and we can calculate the max packet + * limit as below. */ - size -= mdwidth * (kbytes + 1); - size /= kbytes; + if (dwc->maximum_speed >= USB_SPEED_SUPER) + size /= 3; + else + size /= 2;

usb_ep_set_maxpacket_limit(&dep->endpoint, size);

@@ -2267,8 +2266,39 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; + int mdwidth; + int size; + + mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); + + /* MDWIDTH is represented in bits, convert to bytes */ + mdwidth /= 8;

- usb_ep_set_maxpacket_limit(&dep->endpoint, 1024); + /* All OUT endpoints share a single RxFIFO space */ + size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0)); + if (dwc3_is_usb31(dwc)) + size = DWC31_GRXFIFOSIZ_RXFDEP(size); + else + size = DWC3_GRXFIFOSIZ_RXFDEP(size); + + /* FIFO depth is in MDWDITH bytes */ + size *= mdwidth; + + /* + * To meet performance requirement, a minimum recommended RxFIFO size + * is defined as follow: + * RxFIFO size >= (3 x MaxPacketSize) + + * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin) + * + * Then calculate the max packet limit as below. + */ + size -= (3 * 8) + 16; + if (size < 0) + size = 0; + else + size /= 3; + + usb_ep_set_maxpacket_limit(&dep->endpoint, size); dep->endpoint.max_streams = 15; dep->endpoint.ops = &dwc3_gadget_ep_ops; list_add_tail(&dep->endpoint.ep_list,

From: Matthias Blankertz matthias.blankertz@cetitec.com

[ Upstream commit b94e164759b82d0c1c80d4b1c8f12c9bee83f11d ]

The HDMI?_SEL register maps up to four stereo SSI data lanes onto the sdata[0..3] inputs of the HDMI output block. The upper half of the register contains four blocks of 4 bits, with the most significant controlling the sdata3 line and the least significant the sdata0 line.

The shift calculation has an off-by-one error, causing the parent SSI to be mapped to sdata3, the first multi-SSI child to sdata0 and so forth. As the parent SSI transmits the stereo L/R channels, and the HDMI core expects it on the sdata0 line, this causes no audio to be output when playing stereo audio on a multichannel capable HDMI out, and multichannel audio has permutated channels.

Fix the shift calculation to map the parent SSI to sdata0, the first child to sdata1 etc.

Signed-off-by: Matthias Blankertz matthias.blankertz@cetitec.com Acked-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rcar/ssiu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c index f35d882118874..9c7c3e7539c93 100644 --- a/sound/soc/sh/rcar/ssiu.c +++ b/sound/soc/sh/rcar/ssiu.c @@ -221,7 +221,7 @@ static int rsnd_ssiu_init_gen2(struct rsnd_mod *mod, i;

for_each_rsnd_mod_array(i, pos, io, rsnd_ssi_array) { - shift = (i * 4) + 16; + shift = (i * 4) + 20; val = (val & ~(0xF << shift)) | rsnd_mod_id(pos) << shift; }

From: Alex Elder elder@linaro.org

[ Upstream commit 13c060b50a341dd60303e5264d12108b5747f200 ]

If looking up the DT "firmware-name" property fails in q6v6_probe(), the function returns without freeing the remoteproc structure that has been allocated. Fix this by jumping to the free_rproc label, which takes care of this.

Signed-off-by: Alex Elder elder@linaro.org Link: https://lore.kernel.org/r/20200403175005.17130-3-elder@linaro.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/remoteproc/qcom_q6v5_mss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c index 0b1d737b0e97d..8844fc56c5f6d 100644 --- a/drivers/remoteproc/qcom_q6v5_mss.c +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -1607,7 +1607,7 @@ static int q6v5_probe(struct platform_device *pdev) ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name", 1, &qproc->hexagon_mdt_image); if (ret < 0 && ret != -EINVAL) - return ret; + goto free_rproc;

platform_set_drvdata(pdev, qproc);

From: Sandeep Raghuraman sandy.8925@gmail.com

[ Upstream commit bbc25dadc7ed19f9d6b2e30980f0eb4c741bb8bf ]

Initialize thermal controller fields in the PowerPlay table for Hawaii GPUs, so that fan speeds are reported.

Signed-off-by: Sandeep Raghuraman sandy.8925@gmail.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/powerplay/hwmgr/processpptables.c | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c index 77c14671866c0..719597c5d27d9 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c @@ -984,6 +984,32 @@ static int init_thermal_controller( struct pp_hwmgr *hwmgr, const ATOM_PPLIB_POWERPLAYTABLE *powerplay_table) { + hwmgr->thermal_controller.ucType = + powerplay_table->sThermalController.ucType; + hwmgr->thermal_controller.ucI2cLine = + powerplay_table->sThermalController.ucI2cLine; + hwmgr->thermal_controller.ucI2cAddress = + powerplay_table->sThermalController.ucI2cAddress; + + hwmgr->thermal_controller.fanInfo.bNoFan = + (0 != (powerplay_table->sThermalController.ucFanParameters & + ATOM_PP_FANPARAMETERS_NOFAN)); + + hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution = + powerplay_table->sThermalController.ucFanParameters & + ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK; + + hwmgr->thermal_controller.fanInfo.ulMinRPM + = powerplay_table->sThermalController.ucFanMinRPM * 100UL; + hwmgr->thermal_controller.fanInfo.ulMaxRPM + = powerplay_table->sThermalController.ucFanMaxRPM * 100UL; + + set_hw_cap(hwmgr, + ATOM_PP_THERMALCONTROLLER_NONE != hwmgr->thermal_controller.ucType, + PHM_PlatformCaps_ThermalController); + + hwmgr->thermal_controller.use_hw_fan_control = 1; + return 0; }

From: Julien Beraud julien.beraud@orolia.com

[ Upstream commit 15ce30609d1e88d42fb1cd948f453e6d5f188249 ]

There are 2 registers to write to enable a ptp ref clock coming from the fpga. One that enables the usage of the clock from the fpga for emac0 and emac1 as a ptp ref clock, and the other to allow signals from the fpga to reach emac0 and emac1. Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will be written and the ptp ref clock will be set as coming from the fpga. Separate the 2 register writes to only enable signals from the fpga to reach emac0 or emac1 when ptp ref clock is not coming from the fpga.

Signed-off-by: Julien Beraud julien.beraud@orolia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index fa32cd5b418ef..70d41783329dd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c @@ -291,16 +291,19 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac) phymode == PHY_INTERFACE_MODE_MII || phymode == PHY_INTERFACE_MODE_GMII || phymode == PHY_INTERFACE_MODE_SGMII) { - ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2); regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, &module); module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2)); regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, module); - } else { - ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2)); }

+ if (dwmac->f2h_ptp_ref_clk) + ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2); + else + ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << + (reg_shift / 2)); + regmap_write(sys_mgr_base_addr, reg_offset, ctrl);

/* Deassert reset for the phy configuration to be sampled by

From: Matthias Blankertz matthias.blankertz@cetitec.com

[ Upstream commit 0c258657ddfe81b4fc0183378d800c97ba0b7cdd ]

The master SSI of a multi-SSI setup was attached both to the RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream. This is not correct wrt. the meaning of being "parent" in the rest of the SSI code, where it seems to indicate an SSI that provides clock and word sync but is not transmitting/receiving audio data.

Not treating the multi-SSI master as parent allows removal of various special cases to the rsnd_ssi_is_parent conditions introduced in commit a09fb3f28a60 ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode"). It also fixes the issue that operations performed via rsnd_dai_call() were performed twice for the master SSI. This caused some "status check failed" spam when stopping a multi-SSI stream as the driver attempted to stop the master SSI twice.

Signed-off-by: Matthias Blankertz matthias.blankertz@cetitec.com Acked-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetite... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rcar/ssi.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index d51fb3a394486..9900a4f6f4e53 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -407,7 +407,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, * We shouldn't exchange SWSP after running. * This means, parent needs to care it. */ - if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io)) + if (rsnd_ssi_is_parent(mod, io)) goto init_end;

if (rsnd_io_is_play(io)) @@ -559,7 +559,7 @@ static int rsnd_ssi_start(struct rsnd_mod *mod, * EN is for data output. * SSI parent EN is not needed. */ - if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io)) + if (rsnd_ssi_is_parent(mod, io)) return 0;

ssi->cr_en = EN; @@ -582,7 +582,7 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod, if (!rsnd_ssi_is_run_mods(mod, io)) return 0;

- if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io)) + if (rsnd_ssi_is_parent(mod, io)) return 0;

cr = ssi->cr_own | @@ -620,7 +620,7 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod, if (rsnd_is_gen1(priv)) return 0;

- if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io)) + if (rsnd_ssi_is_parent(mod, io)) return 0;

if (!rsnd_ssi_is_run_mods(mod, io)) @@ -737,6 +737,9 @@ static void rsnd_ssi_parent_attach(struct rsnd_mod *mod, if (!rsnd_rdai_is_clk_master(rdai)) return;

+ if (rsnd_ssi_is_multi_slave(mod, io)) + return; + switch (rsnd_mod_id(mod)) { case 1: case 2:

From: Ronnie Sahlberg lsahlber@redhat.com

[ Upstream commit fada37f6f62995cc449b36ebba1220594bfe55fe ]

We use a spinlock while we are reading and accessing the destination address for a server. We need to also use this spinlock to protect when we are modifying this address from reconn_set_ipaddr().

Signed-off-by: Ronnie Sahlberg lsahlber@redhat.com Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/connect.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 4804d1df8c1cf..d4a23b48e24d8 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -375,8 +375,10 @@ static int reconn_set_ipaddr(struct TCP_Server_Info *server) return rc; }

+ spin_lock(&cifs_tcp_ses_lock); rc = cifs_convert_address((struct sockaddr *)&server->dstaddr, ipaddr, strlen(ipaddr)); + spin_unlock(&cifs_tcp_ses_lock); kfree(ipaddr);

return !rc ? -1 : 0;

From: Paulo Alcantara pc@cjr.nz

[ Upstream commit 65303de829dd6d291a4947c1a31de31896f8a060 ]

This disables tcon re-use for DFS shares.

tcon->dfs_path stores the path that the tcon should connect to when doing failing over.

If that tcon is used multiple times e.g. 2 mounts using it with different prefixpath, each will need a different dfs_path but there is only one tcon. The other solution would be to split the tcon in 2 tcons during failover but that is much harder.

tcons could not be shared with DFS in cifs.ko because in a DFS namespace like:

//domain/dfsroot -> /serverA/dfsroot, /serverB/dfsroot

//serverA/dfsroot/link -> /serverA/target1/aa/bb

//serverA/dfsroot/link2 -> /serverA/target1/cc/dd

you can see that link and link2 are two DFS links that both resolve to the same target share (/serverA/target1), so cifs.ko will only contain a single tcon for both link and link2.

The problem with that is, if we (auto)mount "link" and "link2", cifs.ko will only contain a single tcon for both DFS links so we couldn't perform failover or refresh the DFS cache for both links because tcon->dfs_path was set to either "link" or "link2", but not both -- which is wrong.

Signed-off-by: Paulo Alcantara (SUSE) pc@cjr.nz Reviewed-by: Aurelien Aptel aaptel@suse.com Reviewed-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/connect.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index d4a23b48e24d8..9c614d6916c2d 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3419,6 +3419,10 @@ cifs_find_tcon(struct cifs_ses *ses, struct smb_vol *volume_info) spin_lock(&cifs_tcp_ses_lock); list_for_each(tmp, &ses->tcon_list) { tcon = list_entry(tmp, struct cifs_tcon, tcon_list); +#ifdef CONFIG_CIFS_DFS_UPCALL + if (tcon->dfs_path) + continue; +#endif if (!match_tcon(tcon, volume_info)) continue; ++tcon->tc_count;

From: Steven Rostedt (VMware) rostedt@goodmis.org

[ Upstream commit 353da87921a5ec654e7e9024e083f099f1b33c97 ]

kmemleak reported the following:

unreferenced object 0xffff90d47127a920 (size 32): comm "modprobe", pid 1766, jiffies 4294792031 (age 162.568s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 22 01 00 00 00 00 ad de ........"....... 00 78 12 a7 ff ff ff ff 00 00 b6 c0 ff ff ff ff .x.............. backtrace: [<00000000bb79e72e>] register_ftrace_direct+0xcb/0x3a0 [<00000000295e4f79>] do_one_initcall+0x72/0x340 [<00000000873ead18>] do_init_module+0x5a/0x220 [<00000000974d9de5>] load_module+0x2235/0x2550 [<0000000059c3d6ce>] __do_sys_finit_module+0xc0/0x120 [<000000005a8611b4>] do_syscall_64+0x60/0x230 [<00000000a0cdc49e>] entry_SYSCALL_64_after_hwframe+0x49/0xb3

The entry used to save the direct descriptor needs to be freed when unregistering.

Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/ftrace.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index fd81c7de77a70..63089c70adbb6 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -5155,6 +5155,7 @@ int unregister_ftrace_direct(unsigned long ip, unsigned long addr) list_del_rcu(&direct->next); synchronize_rcu_tasks(); kfree(direct); + kfree(entry); ftrace_direct_func_count--; } }

From: Nathan Chancellor natechancellor@gmail.com

[ Upstream commit 5990cdee689c6885b27c6d969a3d58b09002b0bc ]

0day reports over and over on an powerpc randconfig with clang:

lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions

Remove the superfluous casts, which have been done previously for x86 and arm32 in commit dea632cadd12 ("lib/mpi: fix build with clang") and commit 7b7c1df2883d ("lib/mpi/longlong.h: fix building with 32-bit x86").

Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Acked-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://github.com/ClangBuiltLinux/linux/issues/991 Link: https://lore.kernel.org/r/20200413195041.24064-1-natechancellor@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- lib/mpi/longlong.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h index 2dceaca27489c..891e1c3549c46 100644 --- a/lib/mpi/longlong.h +++ b/lib/mpi/longlong.h @@ -722,22 +722,22 @@ do { \ do { \ if (__builtin_constant_p(bh) && (bh) == 0) \ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "%r" ((USItype)(ah)), \ "%r" ((USItype)(al)), \ "rI" ((USItype)(bl))); \ else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "%r" ((USItype)(ah)), \ "%r" ((USItype)(al)), \ "rI" ((USItype)(bl))); \ else \ __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "%r" ((USItype)(ah)), \ "r" ((USItype)(bh)), \ "%r" ((USItype)(al)), \ @@ -747,36 +747,36 @@ do { \ do { \ if (__builtin_constant_p(ah) && (ah) == 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(bh)), \ "rI" ((USItype)(al)), \ "r" ((USItype)(bl))); \ else if (__builtin_constant_p(ah) && (ah) == ~(USItype) 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(bh)), \ "rI" ((USItype)(al)), \ "r" ((USItype)(bl))); \ else if (__builtin_constant_p(bh) && (bh) == 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(ah)), \ "rI" ((USItype)(al)), \ "r" ((USItype)(bl))); \ else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(ah)), \ "rI" ((USItype)(al)), \ "r" ((USItype)(bl))); \ else \ __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ + : "=r" (sh), \ + "=&r" (sl) \ : "r" ((USItype)(ah)), \ "r" ((USItype)(bh)), \ "rI" ((USItype)(al)), \ @@ -787,7 +787,7 @@ do { \ do { \ USItype __m0 = (m0), __m1 = (m1); \ __asm__ ("mulhwu %0,%1,%2" \ - : "=r" ((USItype) ph) \ + : "=r" (ph) \ : "%r" (__m0), \ "r" (__m1)); \ (pl) = __m0 * __m1; \

From: Doug Berger opendmb@gmail.com

[ Upstream commit ecaeceb8a8a145d93c7e136f170238229165348f ]

The driver is designed to drop Rx packets and reclaim the buffers when an allocation fails, and the network interface needs to safely handle this packet loss. Therefore, an allocation failure of Rx SKBs is relatively benign.

However, the output of the warning message occurs with a high scheduling priority that can cause excessive jitter/latency for other high priority processing.

This commit suppresses the warning messages to prevent scheduling problems while retaining the failure count in the statistics of the network interface.

Signed-off-by: Doug Berger opendmb@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index b7c0c20e13258..5fd1a9dfcfff3 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1625,7 +1625,8 @@ static struct sk_buff *bcmgenet_rx_refill(struct bcmgenet_priv *priv, dma_addr_t mapping;

/* Allocate a new Rx skb */ - skb = netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT); + skb = __netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT, + GFP_ATOMIC | __GFP_NOWARN); if (!skb) { priv->mib.alloc_rx_buff_failed++; netif_err(priv, rx_err, priv->dev,

From: Andrii Nakryiko andriin@fb.com

[ Upstream commit dfc55ace9939e1e8703ad37ddbba41aaa31cc0cb ]

Reorder include paths to ensure that runqslower sources are picking up vmlinux.h, generated by runqslower's own Makefile. When runqslower is built from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it might pick up not-yet-complete vmlinux.h, generated by selftests Makefile, which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT) goes first and rely on runqslower's Makefile own dependency chain to ensure vmlinux.h is properly completed before source code relying on it is compiled.

[0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925

Signed-off-by: Andrii Nakryiko andriin@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/bpf/runqslower/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/bpf/runqslower/Makefile b/tools/bpf/runqslower/Makefile index 39edd68afa8e0..8a6f82e56a249 100644 --- a/tools/bpf/runqslower/Makefile +++ b/tools/bpf/runqslower/Makefile @@ -8,7 +8,7 @@ BPFTOOL ?= $(DEFAULT_BPFTOOL) LIBBPF_SRC := $(abspath ../../lib/bpf) BPFOBJ := $(OUTPUT)/libbpf.a BPF_INCLUDE := $(OUTPUT) -INCLUDES := -I$(BPF_INCLUDE) -I$(OUTPUT) -I$(abspath ../../lib) +INCLUDES := -I$(OUTPUT) -I$(BPF_INCLUDE) -I$(abspath ../../lib) CFLAGS := -g -Wall

# Try to detect best kernel BTF source

From: Aaron Ma aaron.ma@canonical.com

commit 5932d260a8d85a103bd6c504fbb85ff58b156bf9 upstream.

On ARCTURUS and RENOIR, powerplay is not supported yet. When plug in or unplug power jack, ACPI event will issue. Then kernel NULL pointer BUG will be triggered. Check for NULL pointers before calling.

Signed-off-by: Aaron Ma aaron.ma@canonical.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -91,7 +91,8 @@ void amdgpu_pm_acpi_event_handler(struct adev->pm.ac_power = true; else adev->pm.ac_power = false; - if (adev->powerplay.pp_funcs->enable_bapm) + if (adev->powerplay.pp_funcs && + adev->powerplay.pp_funcs->enable_bapm) amdgpu_dpm_enable_bapm(adev, adev->pm.ac_power); mutex_unlock(&adev->pm.mutex); }

From: Qian Cai cai@lca.pw

commit 514ccc194971d0649e4e7ec8a9b3a6e33561d7bf upstream.

The commit 842f4be95899 ("KVM: VMX: Add a trampoline to fix VMREAD error handling") removed the declaration of vmread_error() causes a W=1 build failure with KVM_WERROR=y. Fix it by adding it back.

arch/x86/kvm/vmx/vmx.c:359:17: error: no previous prototype for 'vmread_error' [-Werror=missing-prototypes] asmlinkage void vmread_error(unsigned long field, bool fault) ^~~~~~~~~~~~

Signed-off-by: Qian Cai cai@lca.pw Message-Id: 20200402153955.1695-1-cai@lca.pw Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kvm/vmx/ops.h | 1 + 1 file changed, 1 insertion(+)

--- a/arch/x86/kvm/vmx/ops.h +++ b/arch/x86/kvm/vmx/ops.h @@ -12,6 +12,7 @@

#define __ex(x) __kvm_handle_fault_on_reboot(x)

+asmlinkage void vmread_error(unsigned long field, bool fault); __attribute__((regparm(0))) void vmread_error_trampoline(unsigned long field, bool fault); void vmwrite_error(unsigned long field, unsigned long value);

From: Rafael J. Wysocki rafael.j.wysocki@intel.com

commit 243a98894dc525ad2fbeb608722fcb682be3186d upstream.

Fix a comment in acpi_s2idle_prepare_late() that has become outdated after commit f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work").

Fixes: f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work") Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/acpi/sleep.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -982,10 +982,7 @@ static int acpi_s2idle_prepare_late(void

static void acpi_s2idle_sync(void) { - /* - * The EC driver uses the system workqueue and an additional special - * one, so those need to be flushed too. - */ + /* The EC driver uses special workqueues that need to be flushed. */ acpi_ec_flush_work(); acpi_os_wait_events_complete(); /* synchronize Notify handling */ }

From: Jiri Slaby jslaby@suse.cz

commit 526f3d96b8f83b1b13d73bd0b5c79cc2c487ec8e upstream.

Commit 018d26fcd12a ("cgroup, netclassid: periodically release file_lock on classid") added a second cond_resched to write_classid indirectly by update_classid_task. Remove the one in write_classid.

Signed-off-by: Jiri Slaby jslaby@suse.cz Cc: Dmitry Yakunin zeil@yandex-team.ru Cc: Konstantin Khlebnikov khlebnikov@yandex-team.ru Cc: David S. Miller davem@davemloft.net Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/core/netclassid_cgroup.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/net/core/netclassid_cgroup.c +++ b/net/core/netclassid_cgroup.c @@ -127,10 +127,8 @@ static int write_classid(struct cgroup_s cs->classid = (u32)value;

css_task_iter_start(css, 0, &it); - while ((p = css_task_iter_next(&it))) { + while ((p = css_task_iter_next(&it))) update_classid_task(p, cs->classid); - cond_resched(); - } css_task_iter_end(&it);

return 0;