From: Zenghui Yu yuzenghui@huawei.com
[ Upstream commit aac60f1a867773de9eb164013d89c99f3ea1f009 ]
Commit 49dfe94fe5ad ("KVM: arm/arm64: Fix TRACE_INCLUDE_PATH") fixes TRACE_INCLUDE_PATH to the correct relative path to the define_trace.h and explains why did the old one work.
The same fix should be applied to virt/kvm/arm/vgic/trace.h.
Reviewed-by: Masahiro Yamada yamada.masahiro@socionext.com Signed-off-by: Zenghui Yu yuzenghui@huawei.com Signed-off-by: Marc Zyngier maz@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- virt/kvm/arm/vgic/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/virt/kvm/arm/vgic/trace.h b/virt/kvm/arm/vgic/trace.h index 55fed77a9f739..4fd4f6db181b0 100644 --- a/virt/kvm/arm/vgic/trace.h +++ b/virt/kvm/arm/vgic/trace.h @@ -30,7 +30,7 @@ TRACE_EVENT(vgic_update_irq_pending, #endif /* _TRACE_VGIC_H */
#undef TRACE_INCLUDE_PATH -#define TRACE_INCLUDE_PATH ../../../virt/kvm/arm/vgic +#define TRACE_INCLUDE_PATH ../../virt/kvm/arm/vgic #undef TRACE_INCLUDE_FILE #define TRACE_INCLUDE_FILE trace
From: "Lowry Li (Arm Technology China)" Lowry.Li@arm.com
[ Upstream commit 8581d51055a08cc6eb061c8856062290e8582ce4 ]
Adds the check if the writeback_job with an empty fb, then it should be freed in atomic_check phase.
With this change, the driver users will not check empty fb case any more. So refined accordingly.
Signed-off-by: Lowry Li (Arm Technology China) lowry.li@arm.com Reviewed-by: Liviu Dudau liviu.dudau@arm.com Reviewed-by: James Qian Wang (Arm Technology China) james.qian.wang@arm.com Signed-off-by: james qian wang (Arm Technology China) james.qian.wang@arm.com Link: https://patchwork.freedesktop.org/patch/msgid/1564571048-15029-2-git-send-em... Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/arm/display/komeda/komeda_wb_connector.c | 3 +-- drivers/gpu/drm/arm/malidp_mw.c | 4 ++-- drivers/gpu/drm/drm_atomic.c | 13 +++++++++---- drivers/gpu/drm/rcar-du/rcar_du_writeback.c | 4 ++-- drivers/gpu/drm/vc4/vc4_txp.c | 5 ++--- 5 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c index 2851cac94d869..23fbee268119f 100644 --- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c @@ -43,9 +43,8 @@ komeda_wb_encoder_atomic_check(struct drm_encoder *encoder, struct komeda_data_flow_cfg dflow; int err;
- if (!writeback_job || !writeback_job->fb) { + if (!writeback_job) return 0; - }
if (!crtc_st->active) { DRM_DEBUG_ATOMIC("Cannot write the composition result out on a inactive CRTC.\n"); diff --git a/drivers/gpu/drm/arm/malidp_mw.c b/drivers/gpu/drm/arm/malidp_mw.c index 2e812525025dd..a59227b2cdb55 100644 --- a/drivers/gpu/drm/arm/malidp_mw.c +++ b/drivers/gpu/drm/arm/malidp_mw.c @@ -130,7 +130,7 @@ malidp_mw_encoder_atomic_check(struct drm_encoder *encoder, struct drm_framebuffer *fb; int i, n_planes;
- if (!conn_state->writeback_job || !conn_state->writeback_job->fb) + if (!conn_state->writeback_job) return 0;
fb = conn_state->writeback_job->fb; @@ -247,7 +247,7 @@ void malidp_mw_atomic_commit(struct drm_device *drm,
mw_state = to_mw_state(conn_state);
- if (conn_state->writeback_job && conn_state->writeback_job->fb) { + if (conn_state->writeback_job) { struct drm_framebuffer *fb = conn_state->writeback_job->fb;
DRM_DEV_DEBUG_DRIVER(drm->dev, diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 419381abbdd16..14aeaf7363210 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -430,10 +430,15 @@ static int drm_atomic_connector_check(struct drm_connector *connector, return -EINVAL; }
- if (writeback_job->out_fence && !writeback_job->fb) { - DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] requesting out-fence without framebuffer\n", - connector->base.id, connector->name); - return -EINVAL; + if (!writeback_job->fb) { + if (writeback_job->out_fence) { + DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] requesting out-fence without framebuffer\n", + connector->base.id, connector->name); + return -EINVAL; + } + + drm_writeback_cleanup_job(writeback_job); + state->writeback_job = NULL; }
return 0; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_writeback.c b/drivers/gpu/drm/rcar-du/rcar_du_writeback.c index ae07290bba6a4..04efa78d70b6e 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_writeback.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_writeback.c @@ -147,7 +147,7 @@ static int rcar_du_wb_enc_atomic_check(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct drm_framebuffer *fb;
- if (!conn_state->writeback_job || !conn_state->writeback_job->fb) + if (!conn_state->writeback_job) return 0;
fb = conn_state->writeback_job->fb; @@ -221,7 +221,7 @@ void rcar_du_writeback_setup(struct rcar_du_crtc *rcrtc, unsigned int i;
state = rcrtc->writeback.base.state; - if (!state || !state->writeback_job || !state->writeback_job->fb) + if (!state || !state->writeback_job) return;
fb = state->writeback_job->fb; diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c index 96f91c1b4b6e6..e92fa12750343 100644 --- a/drivers/gpu/drm/vc4/vc4_txp.c +++ b/drivers/gpu/drm/vc4/vc4_txp.c @@ -229,7 +229,7 @@ static int vc4_txp_connector_atomic_check(struct drm_connector *conn, int i;
conn_state = drm_atomic_get_new_connector_state(state, conn); - if (!conn_state->writeback_job || !conn_state->writeback_job->fb) + if (!conn_state->writeback_job) return 0;
crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); @@ -269,8 +269,7 @@ static void vc4_txp_connector_atomic_commit(struct drm_connector *conn, u32 ctrl; int i;
- if (WARN_ON(!conn_state->writeback_job || - !conn_state->writeback_job->fb)) + if (WARN_ON(!conn_state->writeback_job)) return;
mode = &conn_state->crtc->state->adjusted_mode;
From: "Lowry Li (Arm Technology China)" Lowry.Li@arm.com
[ Upstream commit b1066a123538044117f0a78ba8c6a50cf5a04c86 ]
During it signals the completion of a writeback job, after releasing the out_fence, we'd clear the pointer.
Check if fence left over in drm_writeback_cleanup_job(), release it.
Signed-off-by: Lowry Li (Arm Technology China) lowry.li@arm.com Reviewed-by: Brian Starkey brian.starkey@arm.com Reviewed-by: James Qian Wang (Arm Technology China) james.qian.wang@arm.com Signed-off-by: james qian wang (Arm Technology China) james.qian.wang@arm.com Link: https://patchwork.freedesktop.org/patch/msgid/1564571048-15029-3-git-send-em... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_writeback.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c index ff138b6ec48ba..43d9e3bb3a943 100644 --- a/drivers/gpu/drm/drm_writeback.c +++ b/drivers/gpu/drm/drm_writeback.c @@ -324,6 +324,9 @@ void drm_writeback_cleanup_job(struct drm_writeback_job *job) if (job->fb) drm_framebuffer_put(job->fb);
+ if (job->out_fence) + dma_fence_put(job->out_fence); + kfree(job); } EXPORT_SYMBOL(drm_writeback_cleanup_job); @@ -366,25 +369,29 @@ drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector, { unsigned long flags; struct drm_writeback_job *job; + struct dma_fence *out_fence;
spin_lock_irqsave(&wb_connector->job_lock, flags); job = list_first_entry_or_null(&wb_connector->job_queue, struct drm_writeback_job, list_entry); - if (job) { + if (job) list_del(&job->list_entry); - if (job->out_fence) { - if (status) - dma_fence_set_error(job->out_fence, status); - dma_fence_signal(job->out_fence); - dma_fence_put(job->out_fence); - } - } + spin_unlock_irqrestore(&wb_connector->job_lock, flags);
if (WARN_ON(!job)) return;
+ out_fence = job->out_fence; + if (out_fence) { + if (status) + dma_fence_set_error(out_fence, status); + dma_fence_signal(out_fence); + dma_fence_put(out_fence); + job->out_fence = NULL; + } + INIT_WORK(&job->cleanup_work, cleanup_work); queue_work(system_long_wq, &job->cleanup_work); }
From: Tony Lindgren tony@atomide.com
[ Upstream commit dd8882a255388ba66175098b1560d4f81c100d30 ]
There's a typo for dra7 mcasp clkctrl bit, it should be 22 like the other macasp instances, and not 24. And in dra7xx_clks[] we have the bits wrong way around.
Fixes: dffa9051d546 ("clk: ti: dra7: add new clkctrl data") Cc: linux-clk@vger.kernel.org Cc: Michael Turquette mturquette@baylibre.com Cc: Stephen Boyd sboyd@kernel.org Cc: Suman Anna s-anna@ti.com Cc: Tero Kristo t-kristo@ti.com Acked-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/ti/clk-7xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index b57fe09b428be..9dd6185a4b4e2 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -683,7 +683,7 @@ static const struct omap_clkctrl_reg_data dra7_l4per2_clkctrl_regs[] __initconst { DRA7_L4PER2_MCASP2_CLKCTRL, dra7_mcasp2_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0154:22" }, { DRA7_L4PER2_MCASP3_CLKCTRL, dra7_mcasp3_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:015c:22" }, { DRA7_L4PER2_MCASP5_CLKCTRL, dra7_mcasp5_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:016c:22" }, - { DRA7_L4PER2_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0184:24" }, + { DRA7_L4PER2_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:0184:22" }, { DRA7_L4PER2_MCASP4_CLKCTRL, dra7_mcasp4_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:018c:22" }, { DRA7_L4PER2_UART7_CLKCTRL, dra7_uart7_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01c4:24" }, { DRA7_L4PER2_UART8_CLKCTRL, dra7_uart8_bit_data, CLKF_SW_SUP, "l4per2-clkctrl:01d4:24" }, @@ -828,8 +828,8 @@ static struct ti_dt_clk dra7xx_clks[] = { DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "l4per2-clkctrl:01f8:22"), DT_CLK(NULL, "mcasp7_ahclkx_mux", "l4per2-clkctrl:01fc:24"), DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "l4per2-clkctrl:01fc:22"), - DT_CLK(NULL, "mcasp8_ahclkx_mux", "l4per2-clkctrl:0184:22"), - DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "l4per2-clkctrl:0184:24"), + DT_CLK(NULL, "mcasp8_ahclkx_mux", "l4per2-clkctrl:0184:24"), + DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "l4per2-clkctrl:0184:22"), DT_CLK(NULL, "mmc1_clk32k", "l3init-clkctrl:0008:8"), DT_CLK(NULL, "mmc1_fclk_div", "l3init-clkctrl:0008:25"), DT_CLK(NULL, "mmc1_fclk_mux", "l3init-clkctrl:0008:24"),
From: Tony Lindgren tony@atomide.com
[ Upstream commit 2d3c8ba3cffa00f76bedb713c8c2126c82d8cd13 ]
The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7. This causes the following warning on beagle-x15:
ti-sysc 48468000.target-module: could not add child clock ahclkr: -19
Also the mcasp clkctrl clock bits are wrong:
For mcasp1 and 2 we have four clocks at bits 28, 24, 22 and 0:
bit 28 is ahclkr bit 24 is ahclkx bit 22 is auxclk bit 0 is fck
For mcasp3 to 8 we have three clocks at bits 24, 22 and 0.
bit 24 is ahclkx bit 22 is auxclk bit 0 is fck
We do not have currently mapped auxclk at bit 22 for the drivers, that can be added if needed.
Fixes: 5241ccbf2819 ("ARM: dts: Add missing ranges for dra7 mcasp l3 ports") Cc: Suman Anna s-anna@ti.com Cc: Tero Kristo t-kristo@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/dra7-l4.dtsi | 48 +++++++++++++++------------------- 1 file changed, 21 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 21e5914fdd620..099d6fe2a57ad 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2762,7 +2762,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; @@ -2799,8 +2799,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; @@ -2818,9 +2818,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x68000 0x2000>, @@ -2836,7 +2835,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2854,9 +2853,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x6c000 0x2000>, @@ -2872,7 +2870,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2890,9 +2888,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x70000 0x2000>, @@ -2908,7 +2905,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2926,9 +2923,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x74000 0x2000>, @@ -2944,7 +2940,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2962,9 +2958,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x78000 0x2000>, @@ -2980,7 +2975,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2998,9 +2993,8 @@ <SYSC_IDLE_SMART>; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x7c000 0x2000>, @@ -3016,7 +3010,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled";
From: Balbir Singh sblbir@amzn.com
[ Upstream commit b224726de5e496dbf78147a66755c3d81e28bdd2 ]
User space programs like udevd may try to read to partitions at the same time the driver detects a namespace is unusable, and may deadlock if revalidate_disk() is called while such a process is waiting to enter the frozen queue. On detecting a dead namespace, move the disk revalidate after unblocking dispatchers that may be holding bd_butex.
changelog Suggested-by: Keith Busch kbusch@kernel.org Signed-off-by: Balbir Singh sblbir@amzn.com Reviewed-by: Keith Busch kbusch@kernel.org Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index d3d6b7bd69033..28217cee5e762 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -103,10 +103,13 @@ static void nvme_set_queue_dying(struct nvme_ns *ns) */ if (!ns->disk || test_and_set_bit(NVME_NS_DEAD, &ns->flags)) return; - revalidate_disk(ns->disk); blk_set_queue_dying(ns->queue); /* Forcibly unquiesce queues to avoid blocking dispatch */ blk_mq_unquiesce_queue(ns->queue); + /* + * Revalidate after unblocking dispatchers that may be holding bd_butex + */ + revalidate_disk(ns->disk); }
static void nvme_queue_scan(struct nvme_ctrl *ctrl)
From: Stanley Chu stanley.chu@mediatek.com
[ Upstream commit f51913eef23f74c3bd07899dc7f1ed6df9e521d8 ]
In some cases, hba may go through shutdown flow without successful initialization and then make system hang.
For example, if ufshcd_change_power_mode() gets error and leads to ufshcd_hba_exit() to release resources of the host, future shutdown flow may hang the system since the host register will be accessed in unpowered state.
To solve this issue, simply add checking to skip shutdown for above kind of situation.
Link: https://lore.kernel.org/r/1568780438-28753-1-git-send-email-stanley.chu@medi... Signed-off-by: Stanley Chu stanley.chu@mediatek.com Acked-by: Bean Huo beanhuo@micron.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 029da74bb2f5c..e674f6148f698 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -8095,6 +8095,9 @@ int ufshcd_shutdown(struct ufs_hba *hba) { int ret = 0;
+ if (!hba->is_powered) + goto out; + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba)) goto out;
From: Xiang Chen chenxiang66@hisilicon.com
[ Upstream commit 70054aa39a013fa52eff432f2223b8bd5c0048f8 ]
For pci device, need to disable device when probe failed after enabled device.
Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@his... Signed-off-by: Xiang Chen chenxiang66@hisilicon.com Reviewed-by: John Garry john.garry@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/megaraid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 45a66048801be..ff6d4aa924213 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4183,11 +4183,11 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ && pdev->subsystem_device == 0xC000) - return -ENODEV; + goto out_disable_device; /* Now check the magic signature byte */ pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic); if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE) - return -ENODEV; + goto out_disable_device; /* Ok it is probably a megaraid */ }
From: Himanshu Madhani hmadhani@marvell.com
[ Upstream commit 248a445adfc8c33ffd67cf1f2e336578e34f9e21 ]
Print if fwdt template is present or not, only when ql2xextended_error_logging is enabled.
Link: https://lore.kernel.org/r/20190912180918.6436-2-hmadhani@marvell.com Signed-off-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index afcd9a8858845..3fbe909744a8f 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3268,7 +3268,7 @@ try_eft:
for (j = 0; j < 2; j++, fwdt++) { if (!fwdt->template) { - ql_log(ql_log_warn, vha, 0x00ba, + ql_dbg(ql_dbg_init, vha, 0x00ba, "-> fwdt%u no template\n", j); continue; }
From: Quinn Tran qutran@marvell.com
[ Upstream commit c3b6a1d397420a0fdd97af2f06abfb78adc370df ]
There are instances, though rare, where a LOGO request cannot be sent out and the thread in free session done can wait indefinitely. Fix this by putting an upper bound to sleep.
Link: https://lore.kernel.org/r/20190912180918.6436-3-hmadhani@marvell.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_target.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 459c28aa3b94a..f77baf107024f 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1021,6 +1021,7 @@ void qlt_free_session_done(struct work_struct *work)
if (logout_started) { bool traced = false; + u16 cnt = 0;
while (!READ_ONCE(sess->logout_completed)) { if (!traced) { @@ -1030,6 +1031,9 @@ void qlt_free_session_done(struct work_struct *work) traced = true; } msleep(100); + cnt++; + if (cnt > 200) + break; }
ql_dbg(ql_dbg_disc, vha, 0xf087,
From: Quinn Tran qutran@marvell.com
[ Upstream commit fd5564ba54e0d8a9e3e823d311b764232e09eb5f ]
On driver unload, 'remove_one' thread was allowed to advance, while session cleanup still lag behind. This patch ensures session deletion will finish before remove_one can advance.
Link: https://lore.kernel.org/r/20190912180918.6436-4-hmadhani@marvell.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_os.c | 1 + drivers/scsi/qla2xxx/qla_target.c | 21 ++++++++------------- 2 files changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 4fda308c3ef5c..084e39e415ff5 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1153,6 +1153,7 @@ qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha) qla2x00_mark_all_devices_lost(vha, 0);
wait_event_timeout(vha->fcport_waitQ, test_fcport_count(vha), 10*HZ); + flush_workqueue(vha->hw->wq); }
/* diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index f77baf107024f..1bb0fc9324ead 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -954,7 +954,7 @@ void qlt_free_session_done(struct work_struct *work) struct qla_hw_data *ha = vha->hw; unsigned long flags; bool logout_started = false; - scsi_qla_host_t *base_vha; + scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); struct qlt_plogi_ack_t *own = sess->plogi_link[QLT_PLOGI_LINK_SAME_WWN];
@@ -1106,6 +1106,7 @@ void qlt_free_session_done(struct work_struct *work) }
spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + sess->free_pending = 0;
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf001, "Unregistration of sess %p %8phC finished fcp_cnt %d\n", @@ -1114,17 +1115,8 @@ void qlt_free_session_done(struct work_struct *work) if (tgt && (tgt->sess_count == 0)) wake_up_all(&tgt->waitQ);
- if (vha->fcport_count == 0) - wake_up_all(&vha->fcport_waitQ); - - base_vha = pci_get_drvdata(ha->pdev); - - sess->free_pending = 0; - - if (test_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags)) - return; - - if ((!tgt || !tgt->tgt_stop) && !LOOP_TRANSITION(vha)) { + if (!test_bit(PFLG_DRIVER_REMOVING, &base_vha->pci_flags) && + (!tgt || !tgt->tgt_stop) && !LOOP_TRANSITION(vha)) { switch (vha->host->active_mode) { case MODE_INITIATOR: case MODE_DUAL: @@ -1137,6 +1129,9 @@ void qlt_free_session_done(struct work_struct *work) break; } } + + if (vha->fcport_count == 0) + wake_up_all(&vha->fcport_waitQ); }
/* ha->tgt.sess_lock supposed to be held on entry */ @@ -1166,7 +1161,7 @@ void qlt_unreg_sess(struct fc_port *sess) sess->last_login_gen = sess->login_gen;
INIT_WORK(&sess->free_work, qlt_free_session_done); - schedule_work(&sess->free_work); + queue_work(sess->vha->hw->wq, &sess->free_work); } EXPORT_SYMBOL(qlt_unreg_sess);
From: Quinn Tran qutran@marvell.com
[ Upstream commit 7f2a398d59d658818f3d219645164676fbbc88e8 ]
Fix stalled link recovery for N2N with FC-NVMe connection.
Link: https://lore.kernel.org/r/20190912180918.6436-6-hmadhani@marvell.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_def.h | 3 +- drivers/scsi/qla2xxx/qla_init.c | 107 +++++++++++++++++++++++--------- drivers/scsi/qla2xxx/qla_mbx.c | 23 ++++++- drivers/scsi/qla2xxx/qla_os.c | 4 ++ 4 files changed, 103 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index bad2b12604f1b..a2922b17b55b0 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2338,6 +2338,7 @@ typedef struct fc_port { unsigned int query:1; unsigned int id_changed:1; unsigned int scan_needed:1; + unsigned int n2n_flag:1;
struct completion nvme_del_done; uint32_t nvme_prli_service_param; @@ -2388,7 +2389,6 @@ typedef struct fc_port { uint8_t fc4_type; uint8_t fc4f_nvme; uint8_t scan_state; - uint8_t n2n_flag;
unsigned long last_queue_full; unsigned long last_ramp_up; @@ -2979,6 +2979,7 @@ enum scan_flags_t { enum fc4type_t { FS_FC4TYPE_FCP = BIT_0, FS_FC4TYPE_NVME = BIT_1, + FS_FCP_IS_N2N = BIT_7, };
struct fab_scan_rp { diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 3fbe909744a8f..cd74cc9651dea 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -746,12 +746,15 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha, break; default: if ((id.b24 != fcport->d_id.b24 && - fcport->d_id.b24) || + fcport->d_id.b24 && + fcport->loop_id != FC_NO_LOOP_ID) || (fcport->loop_id != FC_NO_LOOP_ID && fcport->loop_id != loop_id)) { ql_dbg(ql_dbg_disc, vha, 0x20e3, "%s %d %8phC post del sess\n", __func__, __LINE__, fcport->port_name); + if (fcport->n2n_flag) + fcport->d_id.b24 = 0; qlt_schedule_sess_for_deletion(fcport); return; } @@ -759,6 +762,8 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha, }
fcport->loop_id = loop_id; + if (fcport->n2n_flag) + fcport->d_id.b24 = id.b24;
wwn = wwn_to_u64(fcport->port_name); qlt_find_sess_invalidate_other(vha, wwn, @@ -966,7 +971,7 @@ qla24xx_async_gnl_sp_done(void *s, int res) wwn = wwn_to_u64(e->port_name);
ql_dbg(ql_dbg_disc + ql_dbg_verbose, vha, 0x20e8, - "%s %8phC %02x:%02x:%02x state %d/%d lid %x \n", + "%s %8phC %02x:%02x:%02x CLS %x/%x lid %x \n", __func__, (void *)&wwn, e->port_id[2], e->port_id[1], e->port_id[0], e->current_login_state, e->last_login_state, (loop_id & 0x7fff)); @@ -1498,7 +1503,8 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport) (fcport->fw_login_state == DSC_LS_PRLI_PEND))) return 0;
- if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) { + if (fcport->fw_login_state == DSC_LS_PLOGI_COMP && + !N2N_TOPO(vha->hw)) { if (time_before_eq(jiffies, fcport->plogi_nack_done_deadline)) { set_bit(RELOGIN_NEEDED, &vha->dpc_flags); return 0; @@ -1569,8 +1575,9 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport) qla24xx_post_gpdb_work(vha, fcport, 0); } else { ql_dbg(ql_dbg_disc, vha, 0x2118, - "%s %d %8phC post NVMe PRLI\n", - __func__, __LINE__, fcport->port_name); + "%s %d %8phC post %s PRLI\n", + __func__, __LINE__, fcport->port_name, + fcport->fc4f_nvme ? "NVME" : "FC"); qla24xx_post_prli_work(vha, fcport); } break; @@ -1924,17 +1931,38 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea) break; }
- if (ea->fcport->n2n_flag) { + if (ea->fcport->fc4f_nvme) { ql_dbg(ql_dbg_disc, vha, 0x2118, "%s %d %8phC post fc4 prli\n", __func__, __LINE__, ea->fcport->port_name); ea->fcport->fc4f_nvme = 0; - ea->fcport->n2n_flag = 0; qla24xx_post_prli_work(vha, ea->fcport); + return; + } + + /* at this point both PRLI NVME & PRLI FCP failed */ + if (N2N_TOPO(vha->hw)) { + if (ea->fcport->n2n_link_reset_cnt < 3) { + ea->fcport->n2n_link_reset_cnt++; + /* + * remote port is not sending Plogi. Reset + * link to kick start his state machine + */ + set_bit(N2N_LINK_RESET, &vha->dpc_flags); + } else { + ql_log(ql_log_warn, vha, 0x2119, + "%s %d %8phC Unable to reconnect\n", + __func__, __LINE__, ea->fcport->port_name); + } + } else { + /* + * switch connect. login failed. Take connection + * down and allow relogin to retrigger + */ + ea->fcport->flags &= ~FCF_ASYNC_SENT; + ea->fcport->keep_nport_handle = 0; + qlt_schedule_sess_for_deletion(ea->fcport); } - ql_dbg(ql_dbg_disc, vha, 0x2119, - "%s %d %8phC unhandle event of %x\n", - __func__, __LINE__, ea->fcport->port_name, ea->data[0]); break; } } @@ -5078,28 +5106,47 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha) unsigned long flags;
/* Inititae N2N login. */ - if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) { - /* borrowing */ - u32 *bp, i, sz; - - memset(ha->init_cb, 0, ha->init_cb_size); - sz = min_t(int, sizeof(struct els_plogi_payload), - ha->init_cb_size); - rval = qla24xx_get_port_login_templ(vha, ha->init_cb_dma, - (void *)ha->init_cb, sz); - if (rval == QLA_SUCCESS) { - bp = (uint32_t *)ha->init_cb; - for (i = 0; i < sz/4 ; i++, bp++) - *bp = cpu_to_be32(*bp); + if (N2N_TOPO(ha)) { + if (test_and_clear_bit(N2N_LOGIN_NEEDED, &vha->dpc_flags)) { + /* borrowing */ + u32 *bp, i, sz; + + memset(ha->init_cb, 0, ha->init_cb_size); + sz = min_t(int, sizeof(struct els_plogi_payload), + ha->init_cb_size); + rval = qla24xx_get_port_login_templ(vha, + ha->init_cb_dma, (void *)ha->init_cb, sz); + if (rval == QLA_SUCCESS) { + bp = (uint32_t *)ha->init_cb; + for (i = 0; i < sz/4 ; i++, bp++) + *bp = cpu_to_be32(*bp);
- memcpy(&ha->plogi_els_payld.data, (void *)ha->init_cb, - sizeof(ha->plogi_els_payld.data)); - set_bit(RELOGIN_NEEDED, &vha->dpc_flags); - } else { - ql_dbg(ql_dbg_init, vha, 0x00d1, - "PLOGI ELS param read fail.\n"); + memcpy(&ha->plogi_els_payld.data, + (void *)ha->init_cb, + sizeof(ha->plogi_els_payld.data)); + set_bit(RELOGIN_NEEDED, &vha->dpc_flags); + } else { + ql_dbg(ql_dbg_init, vha, 0x00d1, + "PLOGI ELS param read fail.\n"); + goto skip_login; + } + } + + list_for_each_entry(fcport, &vha->vp_fcports, list) { + if (fcport->n2n_flag) { + qla24xx_fcport_handle_login(vha, fcport); + return QLA_SUCCESS; + } + } +skip_login: + spin_lock_irqsave(&vha->work_lock, flags); + vha->scan.scan_retry++; + spin_unlock_irqrestore(&vha->work_lock, flags); + + if (vha->scan.scan_retry < MAX_SCAN_RETRIES) { + set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); + set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); } - return QLA_SUCCESS; }
found_devs = 0; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 133f5f6270ffa..aadff0124f39f 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2257,7 +2257,7 @@ qla2x00_lip_reset(scsi_qla_host_t *vha) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc;
- ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x105a, + ql_dbg(ql_dbg_disc, vha, 0x105a, "Entered %s.\n", __func__);
if (IS_CNA_CAPABLE(vha->hw)) { @@ -3891,14 +3891,23 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, case TOPO_N2N: ha->current_topology = ISP_CFG_N; spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags); + list_for_each_entry(fcport, &vha->vp_fcports, list) { + fcport->scan_state = QLA_FCPORT_SCAN; + fcport->n2n_flag = 0; + } + fcport = qla2x00_find_fcport_by_wwpn(vha, rptid_entry->u.f1.port_name, 1); spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
if (fcport) { fcport->plogi_nack_done_deadline = jiffies + HZ; - fcport->dm_login_expire = jiffies + 3*HZ; + fcport->dm_login_expire = jiffies + 2*HZ; fcport->scan_state = QLA_FCPORT_FOUND; + fcport->n2n_flag = 1; + if (vha->flags.nvme_enabled) + fcport->fc4f_nvme = 1; + switch (fcport->disc_state) { case DSC_DELETED: set_bit(RELOGIN_NEEDED, @@ -3932,7 +3941,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, rptid_entry->u.f1.port_name, rptid_entry->u.f1.node_name, NULL, - FC4_TYPE_UNKNOWN); + FS_FCP_IS_N2N); }
/* if our portname is higher then initiate N2N login */ @@ -4031,6 +4040,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
list_for_each_entry(fcport, &vha->vp_fcports, list) { fcport->scan_state = QLA_FCPORT_SCAN; + fcport->n2n_flag = 0; }
fcport = qla2x00_find_fcport_by_wwpn(vha, @@ -4040,6 +4050,13 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, fcport->login_retry = vha->hw->login_retry_count; fcport->plogi_nack_done_deadline = jiffies + HZ; fcport->scan_state = QLA_FCPORT_FOUND; + fcport->n2n_flag = 1; + fcport->d_id.b.domain = + rptid_entry->u.f2.remote_nport_id[2]; + fcport->d_id.b.area = + rptid_entry->u.f2.remote_nport_id[1]; + fcport->d_id.b.al_pa = + rptid_entry->u.f2.remote_nport_id[0]; } } } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 084e39e415ff5..12d5f50646fba 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -5050,6 +5050,10 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
memcpy(fcport->port_name, e->u.new_sess.port_name, WWN_SIZE); + + if (e->u.new_sess.fc4_type & FS_FCP_IS_N2N) + fcport->n2n_flag = 1; + } else { ql_dbg(ql_dbg_disc, vha, 0xffff, "%s %8phC mem alloc fail.\n",
From: Quinn Tran qutran@marvell.com
[ Upstream commit f3f1938bb673b1b5ad182c4608f5f8a24921eea3 ]
During link up/bounce, qla driver would do command flush as part of cleanup. In this case, the flush can intefere with FW state. This patch allows FW to be in control of link up.
Link: https://lore.kernel.org/r/20190912180918.6436-7-hmadhani@marvell.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_mbx.c | 2 ++ drivers/scsi/qla2xxx/qla_os.c | 6 ++---- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index aadff0124f39f..abfb9c800ce28 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3905,6 +3905,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, fcport->dm_login_expire = jiffies + 2*HZ; fcport->scan_state = QLA_FCPORT_FOUND; fcport->n2n_flag = 1; + fcport->keep_nport_handle = 1; if (vha->flags.nvme_enabled) fcport->fc4f_nvme = 1;
@@ -4050,6 +4051,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha, fcport->login_retry = vha->hw->login_retry_count; fcport->plogi_nack_done_deadline = jiffies + HZ; fcport->scan_state = QLA_FCPORT_FOUND; + fcport->keep_nport_handle = 1; fcport->n2n_flag = 1; fcport->d_id.b.domain = rptid_entry->u.f2.remote_nport_id[2]; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 12d5f50646fba..2835afbd2edc7 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -5150,11 +5150,9 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e) if (dfcp) qlt_schedule_sess_for_deletion(tfcp);
- - if (N2N_TOPO(vha->hw)) - fcport->flags &= ~FCF_FABRIC_DEVICE; - if (N2N_TOPO(vha->hw)) { + fcport->flags &= ~FCF_FABRIC_DEVICE; + fcport->keep_nport_handle = 1; if (vha->flags.nvme_enabled) { fcport->fc4f_nvme = 1; fcport->n2n_flag = 1;
From: Tony Lindgren tony@atomide.com
[ Upstream commit 4ef5d76b453908f21341e661a9b6f96862f6f589 ]
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings:
dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init
Fixes: 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc") Cc: Lokesh Vutla lokeshvutla@ti.com Reported-by: Suman Anna s-anna@ti.com Reviewed-by: Lokesh Vutla lokeshvutla@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am335x-icev2.dts | 2 +- arch/arm/boot/dts/am33xx-l4.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 18f70b35da4c7..204bccfcc110a 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -432,7 +432,7 @@ pinctrl-0 = <&mmc0_pins_default>; };
-&gpio0 { +&gpio0_target { /* Do not idle the GPIO used for holding the VTT regulator */ ti,no-reset-on-init; ti,no-idle-on-init; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 46849d6ecb3e2..1515f4f914999 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -127,7 +127,7 @@ ranges = <0x0 0x5000 0x1000>; };
- target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "gpio1"; reg = <0x7000 0x4>,
From: Tony Lindgren tony@atomide.com
[ Upstream commit 8ad8041b98c665b6147e607b749586d6e20ba73a ]
For ti,sysc-omap4 compatible devices with no sysstatus register, we do have reset done status available in the SOFTRESET bit that clears when the reset is done. This is documented for example in am437x TRM for DMTIMER_TIOCP_CFG register. The am335x TRM just says that SOFTRESET bit value 1 means reset is ongoing, but it behaves the same way clearing after reset is done.
With the ti-sysc driver handling this automatically based on no sysstatus register defined, we see warnings if SYSC_HAS_RESET_STATUS is missing in the legacy platform data:
ti-sysc 48042000.target-module: sysc_flags 00000222 != 00000022 ti-sysc 48044000.target-module: sysc_flags 00000222 != 00000022 ti-sysc 48046000.target-module: sysc_flags 00000222 != 00000022 ...
Let's fix these warnings by adding SYSC_HAS_RESET_STATUS. Let's also remove the useless parentheses while at it.
If it turns out we do have ti,sysc-omap4 compatible devices without a working SOFTRESET bit we can set up additional quirk handling for it.
Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index adb6271f819be..7773876d165f1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -811,7 +811,8 @@ static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_RESET_STATUS, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP), .sysc_fields = &omap_hwmod_sysc_type2,
From: Tony Lindgren tony@atomide.com
[ Upstream commit 17529d43b21c72466e9109d602c6f5c360a1a9e8 ]
TRM "Table 13-34. SYSCONFIG Register Field Descriptions" lists both standbymode and idlemode that should be just the sidle and midle registers where midle is currently unconfigured for lcdc_sysc. As the dts data has been generated based on lcdc_sysc, we now have an empty "ti,sysc-midle" property.
And so we currently get a warning for lcdc because of a difference with dts provided configuration compared to the legacy platform data. This is because lcdc has SYSC_HAS_MIDLEMODE configured in the platform data without configuring the modes.
Let's fix the issue by adding the missing midlemode to lcdc_sysc, and configuring the "ti,sysc-midle" property based on the TRM values.
Fixes: f711c575cfec ("ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data") Cc: Jyri Sarha jsarha@ti.com Cc: Keerthy j-keerthy@ti.com Cc: Robert Nelson robertcnelson@gmail.com Cc: Suman Anna s-anna@ti.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am33xx-l4.dtsi | 4 +++- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 5 +++-- 2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 1515f4f914999..3287cf695b5a4 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -2038,7 +2038,9 @@ reg = <0xe000 0x4>, <0xe054 0x4>; reg-names = "rev", "sysc"; - ti,sysc-midle ; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index c965af275e341..81d9912f17c85 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -231,8 +231,9 @@ static struct omap_hwmod am33xx_control_hwmod = { static struct omap_hwmod_class_sysconfig lcdc_sysc = { .rev_offs = 0x0, .sysc_offs = 0x54, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART, .sysc_fields = &omap_hwmod_sysc_type2, };
From: Tony Lindgren tony@atomide.com
[ Upstream commit cf395f7ddb9ebc6b2d28d83b53d18aa4e7c19701 ]
This code is currently unable to find the dts opp tables as ti-cpufreq needs to set them up first based on speed binning.
We stopped initializing the opp tables with platform code years ago for device tree based booting with commit 92d51856d740 ("ARM: OMAP3+: do not register non-dt OPP tables for device tree boot"), and all of mach-omap2 is now booting using device tree.
We currently get the following errors on init:
omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu omap2_set_init_voltage: unable to set vdd_mpu omap2_set_init_voltage: unable to find boot up OPP for vdd_core omap2_set_init_voltage: unable to set vdd_core omap2_set_init_voltage: unable to find boot up OPP for vdd_iva omap2_set_init_voltage: unable to set vdd_iva
Let's just drop the unused code. Nowadays ti-cpufreq should be used to to initialize things properly.
Cc: Adam Ford aford173@gmail.com Cc: André Roth neolynx@gmail.com Cc: "H. Nikolaus Schaller" hns@goldelico.com Cc: Nishanth Menon nm@ti.com Cc: Tero Kristo t-kristo@ti.com Tested-by: Adam Ford aford173@gmail.com #logicpd-torpedo-37xx-devkit Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/pm.c | 100 --------------------------------------- 1 file changed, 100 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1fde1bf53fb65..7ac9af56762df 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -74,83 +74,6 @@ int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; }
-/* - * This API is to be called during init to set the various voltage - * domains to the voltage as per the opp table. Typically we boot up - * at the nominal voltage. So this function finds out the rate of - * the clock associated with the voltage domain, finds out the correct - * opp entry and sets the voltage domain to the voltage specified - * in the opp entry - */ -static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, - const char *oh_name) -{ - struct voltagedomain *voltdm; - struct clk *clk; - struct dev_pm_opp *opp; - unsigned long freq, bootup_volt; - struct device *dev; - - if (!vdd_name || !clk_name || !oh_name) { - pr_err("%s: invalid parameters\n", __func__); - goto exit; - } - - if (!strncmp(oh_name, "mpu", 3)) - /* - * All current OMAPs share voltage rail and clock - * source, so CPU0 is used to represent the MPU-SS. - */ - dev = get_cpu_device(0); - else - dev = omap_device_get_by_hwmod_name(oh_name); - - if (IS_ERR(dev)) { - pr_err("%s: Unable to get dev pointer for hwmod %s\n", - __func__, oh_name); - goto exit; - } - - voltdm = voltdm_lookup(vdd_name); - if (!voltdm) { - pr_err("%s: unable to get vdd pointer for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - clk = clk_get(NULL, clk_name); - if (IS_ERR(clk)) { - pr_err("%s: unable to get clk %s\n", __func__, clk_name); - goto exit; - } - - freq = clk_get_rate(clk); - clk_put(clk); - - opp = dev_pm_opp_find_freq_ceil(dev, &freq); - if (IS_ERR(opp)) { - pr_err("%s: unable to find boot up OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - bootup_volt = dev_pm_opp_get_voltage(opp); - dev_pm_opp_put(opp); - - if (!bootup_volt) { - pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", - __func__, vdd_name); - goto exit; - } - - voltdm_scale(voltdm, bootup_volt); - return 0; - -exit: - pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name); - return -EINVAL; -} - #ifdef CONFIG_SUSPEND static int omap_pm_enter(suspend_state_t suspend_state) { @@ -208,25 +131,6 @@ void omap_common_suspend_init(void *pm_suspend) } #endif /* CONFIG_SUSPEND */
-static void __init omap3_init_voltages(void) -{ - if (!soc_is_omap34xx()) - return; - - omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu"); - omap2_set_init_voltage("core", "l3_ick", "l3_main"); -} - -static void __init omap4_init_voltages(void) -{ - if (!soc_is_omap44xx()) - return; - - omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu"); - omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1"); - omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); -} - int __maybe_unused omap_pm_nop_init(void) { return 0; @@ -246,10 +150,6 @@ int __init omap2_common_pm_late_init(void) omap4_twl_init(); omap_voltage_late_init();
- /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); - /* Smartreflex device init */ omap_devinit_smartreflex();
From: "Wunderlich, Mark" mark.wunderlich@intel.com
[ Upstream commit ddef29578a81a1d4d8f2b26a7adbfe21407ee3ea ]
Allow the do/while statement to continue if current time is not after the proposed time 'deadline'. Intent is to allow loop to proceed for a specific time period. Currently the loop, as coded, will exit after first pass.
Signed-off-by: Mark Wunderlich mark.wunderlich@intel.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/tcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 606b13d35d16f..bdadb27b28bbb 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1039,7 +1039,7 @@ static void nvme_tcp_io_work(struct work_struct *w) { struct nvme_tcp_queue *queue = container_of(w, struct nvme_tcp_queue, io_work); - unsigned long start = jiffies + msecs_to_jiffies(1); + unsigned long deadline = jiffies + msecs_to_jiffies(1);
do { bool pending = false; @@ -1064,7 +1064,7 @@ static void nvme_tcp_io_work(struct work_struct *w) if (!pending) return;
- } while (time_after(jiffies, start)); /* quota is exhausted */ + } while (!time_after(jiffies, deadline)); /* quota is exhausted */
queue_work_on(queue->io_cpu, nvme_tcp_wq, &queue->io_work); }
From: Mario Limonciello mario.limonciello@dell.com
[ Upstream commit 7cbb5c6f9aa7cfda7175d82a9cf77a92965b0c5e ]
The action of saving the PCI state will cause numerous PCI configuration space reads which depending upon the vendor implementation may cause the drive to exit the deepest NVMe state.
In these cases ASPM will typically resolve the PCIe link state and APST may resolve the NVMe power state. However it has also been observed that this register access after quiesced will cause PC10 failure on some device combinations.
To resolve this, move the PCI state saving to before SetFeatures has been called. This has been proven to resolve the issue across a 5000 sample test on previously failing disk/system combinations.
Signed-off-by: Mario Limonciello mario.limonciello@dell.com Reviewed-by: Keith Busch kbusch@kernel.org Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 732d5b63ec054..19458e85dab34 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2894,11 +2894,21 @@ static int nvme_suspend(struct device *dev) if (ret < 0) goto unfreeze;
+ /* + * A saved state prevents pci pm from generically controlling the + * device's power. If we're using protocol specific settings, we don't + * want pci interfering. + */ + pci_save_state(pdev); + ret = nvme_set_power_state(ctrl, ctrl->npss); if (ret < 0) goto unfreeze;
if (ret) { + /* discard the saved state */ + pci_load_saved_state(pdev, NULL); + /* * Clearing npss forces a controller reset on resume. The * correct value will be resdicovered then. @@ -2906,14 +2916,7 @@ static int nvme_suspend(struct device *dev) nvme_dev_disable(ndev, true); ctrl->npss = 0; ret = 0; - goto unfreeze; } - /* - * A saved state prevents pci pm from generically controlling the - * device's power. If we're using protocol specific settings, we don't - * want pci interfering. - */ - pci_save_state(pdev); unfreeze: nvme_unfreeze(ctrl); return ret;
From: Dan Carpenter dan.carpenter@oracle.com
[ Upstream commit bc4f6e06a90ea016855fc67212b4d500145f0b8a ]
"ret" should be a negative error code here, but it's either success or possibly uninitialized.
Fixes: 32fd90c40768 ("nvme: change locking for the per-subsystem controller list") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Keith Busch kbusch@kernel.org Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 28217cee5e762..ac2ac06d870b5 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2513,8 +2513,9 @@ static int nvme_init_subsystem(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) list_add_tail(&subsys->entry, &nvme_subsystems); }
- if (sysfs_create_link(&subsys->dev.kobj, &ctrl->device->kobj, - dev_name(ctrl->device))) { + ret = sysfs_create_link(&subsys->dev.kobj, &ctrl->device->kobj, + dev_name(ctrl->device)); + if (ret) { dev_err(ctrl->device, "failed to create sysfs link from subsystem.\n"); goto out_put_subsystem;
From: Max Gurtovoy maxg@mellanox.com
[ Upstream commit ff13c1b87c97275b82b2af99044b4abf6861b28f ]
By default, the NVMe/RDMA driver should support max io_size of 1MiB (or upto the maximum supported size by the HCA). Currently, one will see that /sys/class/block/<bdev>/queue/max_hw_sectors_kb is 1020 instead of 1024.
A non power of 2 value can cause performance degradation due to unnecessary splitting of IO requests and unoptimized allocation units.
The number of pages per MR has been fixed here, so there is no longer any need to reduce max_sectors by 1.
Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Max Gurtovoy maxg@mellanox.com Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/rdma.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 1a6449bc547b9..cc1956349a2af 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -427,7 +427,7 @@ static void nvme_rdma_destroy_queue_ib(struct nvme_rdma_queue *queue) static int nvme_rdma_get_max_fr_pages(struct ib_device *ibdev) { return min_t(u32, NVME_RDMA_MAX_SEGMENTS, - ibdev->attrs.max_fast_reg_page_list_len); + ibdev->attrs.max_fast_reg_page_list_len - 1); }
static int nvme_rdma_create_queue_ib(struct nvme_rdma_queue *queue) @@ -437,7 +437,7 @@ static int nvme_rdma_create_queue_ib(struct nvme_rdma_queue *queue) const int cq_factor = send_wr_factor + 1; /* + RECV */ int comp_vector, idx = nvme_rdma_queue_idx(queue); enum ib_poll_context poll_ctx; - int ret; + int ret, pages_per_mr;
queue->device = nvme_rdma_find_get_device(queue->cm_id); if (!queue->device) { @@ -479,10 +479,16 @@ static int nvme_rdma_create_queue_ib(struct nvme_rdma_queue *queue) goto out_destroy_qp; }
+ /* + * Currently we don't use SG_GAPS MR's so if the first entry is + * misaligned we'll end up using two entries for a single data page, + * so one additional entry is required. + */ + pages_per_mr = nvme_rdma_get_max_fr_pages(ibdev) + 1; ret = ib_mr_pool_init(queue->qp, &queue->qp->rdma_mrs, queue->queue_size, IB_MR_TYPE_MEM_REG, - nvme_rdma_get_max_fr_pages(ibdev), 0); + pages_per_mr, 0); if (ret) { dev_err(queue->ctrl->ctrl.device, "failed to initialize MR pool sized %d for QID %d\n", @@ -824,8 +830,8 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl, if (error) goto out_stop_queue;
- ctrl->ctrl.max_hw_sectors = - (ctrl->max_fr_pages - 1) << (ilog2(SZ_4K) - 9); + ctrl->ctrl.max_segments = ctrl->max_fr_pages; + ctrl->ctrl.max_hw_sectors = ctrl->max_fr_pages << (ilog2(SZ_4K) - 9);
error = nvme_init_identify(&ctrl->ctrl); if (error)
From: Gabriel Craciunescu nix.or.die@gmail.com
[ Upstream commit f03e42c6af60f778a6d1ccfb857db9b2ec835279 ]
Booting with default_ps_max_latency_us >6000 makes the device fail. Also SUBNQN is NULL and gives a warning on each boot/resume. $ nvme id-ctrl /dev/nvme0 | grep ^subnqn subnqn : (null)
I use this device with an Acer Nitro 5 (AN515-43-R8BF) Laptop. To be sure is not a Laptop issue only, I tested the device on my server board with the same results. ( with 2x,4x link on the board and 4x link on a PCI-E card ).
Signed-off-by: Gabriel Craciunescu nix.or.die@gmail.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/pci.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 19458e85dab34..86763969e7cb0 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3041,6 +3041,9 @@ static const struct pci_device_id nvme_id_table[] = { .driver_data = NVME_QUIRK_LIGHTNVM, }, { PCI_DEVICE(0x10ec, 0x5762), /* ADATA SX6000LNP */ .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, }, + { PCI_DEVICE(0x1cc1, 0x8201), /* ADATA SX8200PNP 512GB */ + .driver_data = NVME_QUIRK_NO_DEEPEST_PS | + NVME_QUIRK_IGNORE_DEV_SUBNQN, }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001) }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2003) },
From: Jian-Hong Pan jian-hong@endlessm.com
[ Upstream commit 19ea025e1d28c629b369c3532a85b3df478cc5c6 ]
Kingston NVME SSD with firmware version E8FK11.T has no interrupt after resume with actions related to suspend to idle. This patch applied NVME_QUIRK_SIMPLE_SUSPEND quirk to fix this issue.
Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204887 Signed-off-by: Jian-Hong Pan jian-hong@endlessm.com Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index ac2ac06d870b5..3304e2c8a448a 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2270,6 +2270,16 @@ static const struct nvme_core_quirk_entry core_quirks[] = { .vid = 0x14a4, .fr = "22301111", .quirks = NVME_QUIRK_SIMPLE_SUSPEND, + }, + { + /* + * This Kingston E8FK11.T firmware version has no interrupt + * after resume with actions related to suspend to idle + * https://bugzilla.kernel.org/show_bug.cgi?id=204887 + */ + .vid = 0x2646, + .fr = "E8FK11.T", + .quirks = NVME_QUIRK_SIMPLE_SUSPEND, } };
From: Marta Rybczynska mrybczyn@kalray.eu
[ Upstream commit 65e68edce0db433aa0c2b26d7dc14fbbbeb89fbb ]
It is not possible to get 64-bit results from the passthru commands, what prevents from getting for the Capabilities (CAP) property value.
As a result, it is not possible to implement IOL's NVMe Conformance test 4.3 Case 1 for Fabrics targets [1] (page 123).
This issue has been already discussed [2], but without a solution.
This patch solves the problem by adding new ioctls with a new passthru structure, including 64-bit results. The older ioctls stay unchanged.
[1] https://www.iol.unh.edu/sites/default/files/testsuites/nvme/UNH-IOL_NVMe_Con... [2] http://lists.infradead.org/pipermail/linux-nvme/2018-June/018791.html
Signed-off-by: Marta Rybczynska marta.rybczynska@kalray.eu Reviewed-by: Keith Busch kbusch@kernel.org Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 108 +++++++++++++++++++++++++++----- include/uapi/linux/nvme_ioctl.h | 23 +++++++ 2 files changed, 115 insertions(+), 16 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 3304e2c8a448a..36a5ed1eacbea 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -852,7 +852,7 @@ out: static int nvme_submit_user_cmd(struct request_queue *q, struct nvme_command *cmd, void __user *ubuffer, unsigned bufflen, void __user *meta_buffer, unsigned meta_len, - u32 meta_seed, u32 *result, unsigned timeout) + u32 meta_seed, u64 *result, unsigned timeout) { bool write = nvme_is_write(cmd); struct nvme_ns *ns = q->queuedata; @@ -893,7 +893,7 @@ static int nvme_submit_user_cmd(struct request_queue *q, else ret = nvme_req(req)->status; if (result) - *result = le32_to_cpu(nvme_req(req)->result.u32); + *result = le64_to_cpu(nvme_req(req)->result.u64); if (meta && !ret && !write) { if (copy_to_user(meta_buffer, meta, meta_len)) ret = -EFAULT; @@ -1339,6 +1339,54 @@ static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns, struct nvme_command c; unsigned timeout = 0; u32 effects; + u64 result; + int status; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + if (copy_from_user(&cmd, ucmd, sizeof(cmd))) + return -EFAULT; + if (cmd.flags) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + c.common.opcode = cmd.opcode; + c.common.flags = cmd.flags; + c.common.nsid = cpu_to_le32(cmd.nsid); + c.common.cdw2[0] = cpu_to_le32(cmd.cdw2); + c.common.cdw2[1] = cpu_to_le32(cmd.cdw3); + c.common.cdw10 = cpu_to_le32(cmd.cdw10); + c.common.cdw11 = cpu_to_le32(cmd.cdw11); + c.common.cdw12 = cpu_to_le32(cmd.cdw12); + c.common.cdw13 = cpu_to_le32(cmd.cdw13); + c.common.cdw14 = cpu_to_le32(cmd.cdw14); + c.common.cdw15 = cpu_to_le32(cmd.cdw15); + + if (cmd.timeout_ms) + timeout = msecs_to_jiffies(cmd.timeout_ms); + + effects = nvme_passthru_start(ctrl, ns, cmd.opcode); + status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c, + (void __user *)(uintptr_t)cmd.addr, cmd.data_len, + (void __user *)(uintptr_t)cmd.metadata, + cmd.metadata_len, 0, &result, timeout); + nvme_passthru_end(ctrl, effects); + + if (status >= 0) { + if (put_user(result, &ucmd->result)) + return -EFAULT; + } + + return status; +} + +static int nvme_user_cmd64(struct nvme_ctrl *ctrl, struct nvme_ns *ns, + struct nvme_passthru_cmd64 __user *ucmd) +{ + struct nvme_passthru_cmd64 cmd; + struct nvme_command c; + unsigned timeout = 0; + u32 effects; int status;
if (!capable(CAP_SYS_ADMIN)) @@ -1409,6 +1457,41 @@ static void nvme_put_ns_from_disk(struct nvme_ns_head *head, int idx) srcu_read_unlock(&head->srcu, idx); }
+static bool is_ctrl_ioctl(unsigned int cmd) +{ + if (cmd == NVME_IOCTL_ADMIN_CMD || cmd == NVME_IOCTL_ADMIN64_CMD) + return true; + if (is_sed_ioctl(cmd)) + return true; + return false; +} + +static int nvme_handle_ctrl_ioctl(struct nvme_ns *ns, unsigned int cmd, + void __user *argp, + struct nvme_ns_head *head, + int srcu_idx) +{ + struct nvme_ctrl *ctrl = ns->ctrl; + int ret; + + nvme_get_ctrl(ns->ctrl); + nvme_put_ns_from_disk(head, srcu_idx); + + switch (cmd) { + case NVME_IOCTL_ADMIN_CMD: + ret = nvme_user_cmd(ctrl, NULL, argp); + break; + case NVME_IOCTL_ADMIN64_CMD: + ret = nvme_user_cmd64(ctrl, NULL, argp); + break; + default: + ret = sed_ioctl(ctrl->opal_dev, cmd, argp); + break; + } + nvme_put_ctrl(ctrl); + return ret; +} + static int nvme_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) { @@ -1426,20 +1509,8 @@ static int nvme_ioctl(struct block_device *bdev, fmode_t mode, * seperately and drop the ns SRCU reference early. This avoids a * deadlock when deleting namespaces using the passthrough interface. */ - if (cmd == NVME_IOCTL_ADMIN_CMD || is_sed_ioctl(cmd)) { - struct nvme_ctrl *ctrl = ns->ctrl; - - nvme_get_ctrl(ns->ctrl); - nvme_put_ns_from_disk(head, srcu_idx); - - if (cmd == NVME_IOCTL_ADMIN_CMD) - ret = nvme_user_cmd(ctrl, NULL, argp); - else - ret = sed_ioctl(ctrl->opal_dev, cmd, argp); - - nvme_put_ctrl(ctrl); - return ret; - } + if (is_ctrl_ioctl(cmd)) + return nvme_handle_ctrl_ioctl(ns, cmd, argp, head, srcu_idx);
switch (cmd) { case NVME_IOCTL_ID: @@ -1452,6 +1523,9 @@ static int nvme_ioctl(struct block_device *bdev, fmode_t mode, case NVME_IOCTL_SUBMIT_IO: ret = nvme_submit_io(ns, argp); break; + case NVME_IOCTL_IO64_CMD: + ret = nvme_user_cmd64(ns->ctrl, ns, argp); + break; default: if (ns->ndev) ret = nvme_nvm_ioctl(ns, cmd, arg); @@ -2826,6 +2900,8 @@ static long nvme_dev_ioctl(struct file *file, unsigned int cmd, switch (cmd) { case NVME_IOCTL_ADMIN_CMD: return nvme_user_cmd(ctrl, NULL, argp); + case NVME_IOCTL_ADMIN64_CMD: + return nvme_user_cmd64(ctrl, NULL, argp); case NVME_IOCTL_IO_CMD: return nvme_dev_user_cmd(ctrl, argp); case NVME_IOCTL_RESET: diff --git a/include/uapi/linux/nvme_ioctl.h b/include/uapi/linux/nvme_ioctl.h index 1c215ea1798e6..e168dc59e9a0d 100644 --- a/include/uapi/linux/nvme_ioctl.h +++ b/include/uapi/linux/nvme_ioctl.h @@ -45,6 +45,27 @@ struct nvme_passthru_cmd { __u32 result; };
+struct nvme_passthru_cmd64 { + __u8 opcode; + __u8 flags; + __u16 rsvd1; + __u32 nsid; + __u32 cdw2; + __u32 cdw3; + __u64 metadata; + __u64 addr; + __u32 metadata_len; + __u32 data_len; + __u32 cdw10; + __u32 cdw11; + __u32 cdw12; + __u32 cdw13; + __u32 cdw14; + __u32 cdw15; + __u32 timeout_ms; + __u64 result; +}; + #define nvme_admin_cmd nvme_passthru_cmd
#define NVME_IOCTL_ID _IO('N', 0x40) @@ -54,5 +75,7 @@ struct nvme_passthru_cmd { #define NVME_IOCTL_RESET _IO('N', 0x44) #define NVME_IOCTL_SUBSYS_RESET _IO('N', 0x45) #define NVME_IOCTL_RESCAN _IO('N', 0x46) +#define NVME_IOCTL_ADMIN64_CMD _IOWR('N', 0x47, struct nvme_passthru_cmd64) +#define NVME_IOCTL_IO64_CMD _IOWR('N', 0x48, struct nvme_passthru_cmd64)
#endif /* _UAPI_LINUX_NVME_IOCTL_H */
From: Jim Mattson jmattson@google.com
[ Upstream commit a1a640b8c0cd8a2a7f84ab694f04bc64dc6988af ]
Don't return -E2BIG from __do_cpuid_func when processing function 0BH or 1FH and the last interesting subleaf occupies the last allocated entry in the result array.
Cc: Paolo Bonzini pbonzini@redhat.com Fixes: 831bf664e9c1fc ("KVM: Refactor and simplify kvm_dev_ioctl_get_supported_cpuid") Signed-off-by: Jim Mattson jmattson@google.com Reviewed-by: Peter Shier pshier@google.com Reviewed-by: Sean Christopherson sean.j.christopherson@intel.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/cpuid.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index e7d25f4364664..429648ae5653f 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -612,16 +612,20 @@ static inline int __do_cpuid_func(struct kvm_cpuid_entry2 *entry, u32 function, */ case 0x1f: case 0xb: { - int i, level_type; + int i;
- /* read more entries until level_type is zero */ - for (i = 1; ; ++i) { + /* + * We filled in entry[0] for CPUID(EAX=<function>, + * ECX=00H) above. If its level type (ECX[15:8]) is + * zero, then the leaf is unimplemented, and we're + * done. Otherwise, continue to populate entries + * until the level type (ECX[15:8]) of the previously + * added entry is zero. + */ + for (i = 1; entry[i - 1].ecx & 0xff00; ++i) { if (*nent >= maxnent) goto out;
- level_type = entry[i - 1].ecx & 0xff00; - if (!level_type) - break; do_host_cpuid(&entry[i], function, i); ++*nent; }
From: Jim Mattson jmattson@google.com
[ Upstream commit 43561123ab3759eb6ff47693aec1a307af0aef83 ]
For these CPUID leaves, the EDX output is not dependent on the ECX input (i.e. the SIGNIFCANT_INDEX flag doesn't apply to EDX). Furthermore, the low byte of the ECX output is always identical to the low byte of the ECX input. KVM does not produce the correct ECX and EDX outputs for any undefined subleaves beyond the first.
Special-case these CPUID leaves in kvm_cpuid, so that the ECX and EDX outputs are properly generated for all undefined subleaves.
Fixes: 0771671749b59a ("KVM: Enhance guest cpuid management") Fixes: a87f2d3a6eadab ("KVM: x86: Add Intel CPUID.1F cpuid emulation support") Signed-off-by: Jim Mattson jmattson@google.com Reviewed-by: Marc Orr marcorr@google.com Reviewed-by: Peter Shier pshier@google.com Reviewed-by: Jacob Xu jacobhxu@google.com Cc: Sean Christopherson sean.j.christopherson@intel.com Cc: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/cpuid.c | 83 +++++++++++++++++++++++++------------------- 1 file changed, 47 insertions(+), 36 deletions(-)
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 429648ae5653f..a8a46e0b3d13b 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -962,53 +962,64 @@ struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu, EXPORT_SYMBOL_GPL(kvm_find_cpuid_entry);
/* - * If no match is found, check whether we exceed the vCPU's limit - * and return the content of the highest valid _standard_ leaf instead. - * This is to satisfy the CPUID specification. + * If the basic or extended CPUID leaf requested is higher than the + * maximum supported basic or extended leaf, respectively, then it is + * out of range. */ -static struct kvm_cpuid_entry2* check_cpuid_limit(struct kvm_vcpu *vcpu, - u32 function, u32 index) +static bool cpuid_function_in_range(struct kvm_vcpu *vcpu, u32 function) { - struct kvm_cpuid_entry2 *maxlevel; - - maxlevel = kvm_find_cpuid_entry(vcpu, function & 0x80000000, 0); - if (!maxlevel || maxlevel->eax >= function) - return NULL; - if (function & 0x80000000) { - maxlevel = kvm_find_cpuid_entry(vcpu, 0, 0); - if (!maxlevel) - return NULL; - } - return kvm_find_cpuid_entry(vcpu, maxlevel->eax, index); + struct kvm_cpuid_entry2 *max; + + max = kvm_find_cpuid_entry(vcpu, function & 0x80000000, 0); + return max && function <= max->eax; }
bool kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx, u32 *ecx, u32 *edx, bool check_limit) { u32 function = *eax, index = *ecx; - struct kvm_cpuid_entry2 *best; - bool entry_found = true; - - best = kvm_find_cpuid_entry(vcpu, function, index); - - if (!best) { - entry_found = false; - if (!check_limit) - goto out; + struct kvm_cpuid_entry2 *entry; + struct kvm_cpuid_entry2 *max; + bool found;
- best = check_cpuid_limit(vcpu, function, index); + entry = kvm_find_cpuid_entry(vcpu, function, index); + found = entry; + /* + * Intel CPUID semantics treats any query for an out-of-range + * leaf as if the highest basic leaf (i.e. CPUID.0H:EAX) were + * requested. + */ + if (!entry && check_limit && !cpuid_function_in_range(vcpu, function)) { + max = kvm_find_cpuid_entry(vcpu, 0, 0); + if (max) { + function = max->eax; + entry = kvm_find_cpuid_entry(vcpu, function, index); + } } - -out: - if (best) { - *eax = best->eax; - *ebx = best->ebx; - *ecx = best->ecx; - *edx = best->edx; - } else + if (entry) { + *eax = entry->eax; + *ebx = entry->ebx; + *ecx = entry->ecx; + *edx = entry->edx; + } else { *eax = *ebx = *ecx = *edx = 0; - trace_kvm_cpuid(function, *eax, *ebx, *ecx, *edx, entry_found); - return entry_found; + /* + * When leaf 0BH or 1FH is defined, CL is pass-through + * and EDX is always the x2APIC ID, even for undefined + * subleaves. Index 1 will exist iff the leaf is + * implemented, so we pass through CL iff leaf 1 + * exists. EDX can be copied from any existing index. + */ + if (function == 0xb || function == 0x1f) { + entry = kvm_find_cpuid_entry(vcpu, function, 1); + if (entry) { + *ecx = index & 0xff; + *edx = entry->edx; + } + } + } + trace_kvm_cpuid(function, *eax, *ebx, *ecx, *edx, found); + return found; } EXPORT_SYMBOL_GPL(kvm_cpuid);
From: Jim Mattson jmattson@google.com
[ Upstream commit 5f41a37b151f6459e0b650a2f4d1d59b6c02d1ab ]
When the guest CPUID information represents an AMD vCPU, return all zeroes for queries of undefined CPUID leaves, whether or not they are in range.
Signed-off-by: Jim Mattson jmattson@google.com Fixes: bd22f5cfcfe8f6 ("KVM: move and fix substitue search for missing CPUID entries") Reviewed-by: Marc Orr marcorr@google.com Reviewed-by: Peter Shier pshier@google.com Reviewed-by: Jacob Xu jacobhxu@google.com Cc: Sean Christopherson sean.j.christopherson@intel.com Cc: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/cpuid.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index a8a46e0b3d13b..fd1b8db8bf242 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -987,9 +987,11 @@ bool kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx, /* * Intel CPUID semantics treats any query for an out-of-range * leaf as if the highest basic leaf (i.e. CPUID.0H:EAX) were - * requested. + * requested. AMD CPUID semantics returns all zeroes for any + * undefined leaf, whether or not the leaf is in range. */ - if (!entry && check_limit && !cpuid_function_in_range(vcpu, function)) { + if (!entry && check_limit && !guest_cpuid_is_amd(vcpu) && + !cpuid_function_in_range(vcpu, function)) { max = kvm_find_cpuid_entry(vcpu, 0, 0); if (max) { function = max->eax;
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 504ce1954fba888936c9d13ccc1e3db9b8f613d5 ]
I was surprised to see that the guest reported `fxsave_leak' while the host did not. After digging deeper I noticed that the bits are simply masked out during enumeration.
The XSAVEERPTR feature is actually a bug fix on AMD which means the kernel can disable a workaround.
Pass XSAVEERPTR to the guest if available on the host.
Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/cpuid.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index fd1b8db8bf242..59b66e343fa5a 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -479,6 +479,7 @@ static inline int __do_cpuid_func(struct kvm_cpuid_entry2 *entry, u32 function,
/* cpuid 0x80000008.ebx */ const u32 kvm_cpuid_8000_0008_ebx_x86_features = + F(XSAVEERPTR) | F(WBNOINVD) | F(AMD_IBPB) | F(AMD_IBRS) | F(AMD_SSBD) | F(VIRT_SSBD) | F(AMD_SSB_NO) | F(AMD_STIBP) | F(AMD_STIBP_ALWAYS_ON);
On 09/10/19 19:05, Sasha Levin wrote:
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 504ce1954fba888936c9d13ccc1e3db9b8f613d5 ]
I was surprised to see that the guest reported `fxsave_leak' while the host did not. After digging deeper I noticed that the bits are simply masked out during enumeration.
The XSAVEERPTR feature is actually a bug fix on AMD which means the kernel can disable a workaround.
Pass XSAVEERPTR to the guest if available on the host.
Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
arch/x86/kvm/cpuid.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index fd1b8db8bf242..59b66e343fa5a 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -479,6 +479,7 @@ static inline int __do_cpuid_func(struct kvm_cpuid_entry2 *entry, u32 function, /* cpuid 0x80000008.ebx */ const u32 kvm_cpuid_8000_0008_ebx_x86_features =
F(XSAVEERPTR) |
Yet another example of a patch that shouldn't be stable material (in this case it's fine, but there can certainly be cases where just adding a single flag depends on core kernel changes).
Paolo
On 2019-10-09 23:15:07 [+0200], Paolo Bonzini wrote:
--- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -479,6 +479,7 @@ static inline int __do_cpuid_func(struct kvm_cpuid_entry2 *entry, u32 function, /* cpuid 0x80000008.ebx */ const u32 kvm_cpuid_8000_0008_ebx_x86_features =
F(XSAVEERPTR) |Yet another example of a patch that shouldn't be stable material (in this case it's fine, but there can certainly be cases where just adding a single flag depends on core kernel changes).
Also, taking advantage of this feature requires changes which just landed in qemu's master branch.
Paolo
Sebastian
On 09/10/19 23:40, Sebastian Andrzej Siewior wrote:
const u32 kvm_cpuid_8000_0008_ebx_x86_features =
F(XSAVEERPTR) |Yet another example of a patch that shouldn't be stable material (in this case it's fine, but there can certainly be cases where just adding a single flag depends on core kernel changes).
Also, taking advantage of this feature requires changes which just landed in qemu's master branch.
That's not a big deal, every QEMU supports every kernel and vice versa.
Paolo
On 2019-10-10 00:50:09 [+0200], Paolo Bonzini wrote:
Also, taking advantage of this feature requires changes which just landed in qemu's master branch.
That's not a big deal, every QEMU supports every kernel and vice versa.
That is correct. My point was that the visibility of this change on user's side is very limited.
Paolo
Sebastian
linux-stable-mirror@lists.linaro.org
-
Paolo Bonzini -
Sasha Levin -
Sebastian Andrzej Siewior