This device is part of a Realtek RTW8852BE chip. The device table is as follows:
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=4853 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Cc: stable@vger.kernel.org Signed-off-by: Larry Finger Larry.Finger@lwfinger.net --- v2 - fix too long line in description --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 764d176e9735..1019f19d86a7 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -540,6 +540,8 @@ static const struct usb_device_id blacklist_table[] = { /* Realtek 8852BE Bluetooth devices */ { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0x4853), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |
Dear Larry,
Thank you for your patch.
Am 09.08.23 um 03:04 schrieb Larry Finger:
This device is part of a Realtek RTW8852BE chip. The device table is as follows:
[…]
Cc: stable@vger.kernel.org Signed-off-by: Larry Finger Larry.Finger@lwfinger.net
v2 - fix too long line in description
You also need to start with a capital letter: Bluetooth.
Also, I’d be more specific in the commit message summary. Maybe:
Bluetooth: Flag RTL 0bda:4853 to support wide band speech
drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 764d176e9735..1019f19d86a7 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -540,6 +540,8 @@ static const struct usb_device_id blacklist_table[] = {
(Unrelated, although it’s named `blacklist_table`, it evolved to a quirk table?
/* Realtek 8852BE Bluetooth devices */ { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH },
- { USB_DEVICE(0x0bda, 0x4853), .driver_info = BTUSB_REALTEK |
{ USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |BTUSB_WIDEBAND_SPEECH },
Kind regards,
Paul
On 8/9/23 00:58, Paul Menzel wrote:
Dear Larry,
Thank you for your patch.
Am 09.08.23 um 03:04 schrieb Larry Finger:
This device is part of a Realtek RTW8852BE chip. The device table is as follows:
[…]
Cc: stable@vger.kernel.org Signed-off-by: Larry Finger Larry.Finger@lwfinger.net
v2 - fix too long line in description
You also need to start with a capital letter: Bluetooth.
Also, I’d be more specific in the commit message summary. Maybe:
Bluetooth: Flag RTL 0bda:4853 to support wide band speech
No, that one is not better. The intent is to let the device be driven by btrtl, not btusb. I changed it to "Bluetooth: Add device 0bda:4853 to blacklist/quirk table."
Larry
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz luiz.von.dentz@intel.com:
On Tue, 8 Aug 2023 20:04:03 -0500 you wrote:
This device is part of a Realtek RTW8852BE chip. The device table is as follows:
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=4853 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
[...]
Here is the summary with links: - [v2] bluetooth: Add device 0bda:4853 to device tables https://git.kernel.org/bluetooth/bluetooth-next/c/0ae8f7d53554
You are awesome, thank you!
linux-stable-mirror@lists.linaro.org