This reverts commit 8def9ec46a5fafc0abcf34489a9e8a787bca984d.
The firmware keep-alive does not cause any event in case of error such as non acked. It's just a basic keep alive to prevent the AP to kick-off the station due to inactivity. So let mac80211 submit its own monitoring packet (probe/null) and disconnect on timeout.
Note: We want to keep firmware keep alive to prevent kick-off when host is in suspend-to-mem (no mac80211 monitor packet). Ideally fw keep alive should be enabled in suspend path and disabled in resume path to prevent having both firmware and mac80211 submitting periodic null packets.
This fixes non detected AP leaving issues in active mode (nothing monitors beacon or connection).
Cc: stable@vger.kernel.org Fixes: 8def9ec46a5f ("wcn36xx: Enable firmware link monitoring") Signed-off-by: Loic Poulain loic.poulain@linaro.org --- drivers/net/wireless/ath/wcn36xx/main.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index 216bc34..128d25d 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1362,7 +1362,6 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn) ieee80211_hw_set(wcn->hw, HAS_RATE_CONTROL); ieee80211_hw_set(wcn->hw, SINGLE_SCAN_ON_ALL_BANDS); ieee80211_hw_set(wcn->hw, REPORTS_TX_ACK_STATUS); - ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR);
wcn->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP) |
On 30/08/2021 18:09, Loic Poulain wrote:
This reverts commit 8def9ec46a5fafc0abcf34489a9e8a787bca984d.
The firmware keep-alive does not cause any event in case of error such as non acked. It's just a basic keep alive to prevent the AP to kick-off the station due to inactivity. So let mac80211 submit its own monitoring packet (probe/null) and disconnect on timeout.
Note: We want to keep firmware keep alive to prevent kick-off when host is in suspend-to-mem (no mac80211 monitor packet). Ideally fw keep alive should be enabled in suspend path and disabled in resume path to prevent having both firmware and mac80211 submitting periodic null packets.
This fixes non detected AP leaving issues in active mode (nothing monitors beacon or connection).
Cc: stable@vger.kernel.org Fixes: 8def9ec46a5f ("wcn36xx: Enable firmware link monitoring") Signed-off-by: Loic Poulain loic.poulain@linaro.org
drivers/net/wireless/ath/wcn36xx/main.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index 216bc34..128d25d 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1362,7 +1362,6 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn) ieee80211_hw_set(wcn->hw, HAS_RATE_CONTROL); ieee80211_hw_set(wcn->hw, SINGLE_SCAN_ON_ALL_BANDS); ieee80211_hw_set(wcn->hw, REPORTS_TX_ACK_STATUS);
- ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR);
wcn->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP) |
But why is BSS heartbeat offload not running, it should be.
I agree we should switch this bit off for now since its obviously not working as intended.
But we need to root cause _why_
In suspend absent a working heartbeat monitor - if the AP goes away we stay in suspend indefinitely.
Given we don't have roam offload enabled either, in this reference, it also means we won't roam to a new AP until Linux resumes, which is certainly not the way we want this to work.
In any case, for now until we solve this bug
Acked-by: Bryan O'Donoghue bryan.odonoghue@linaro.org
Loic Poulain loic.poulain@linaro.org writes:
This reverts commit 8def9ec46a5fafc0abcf34489a9e8a787bca984d.
The firmware keep-alive does not cause any event in case of error such as non acked. It's just a basic keep alive to prevent the AP to kick-off the station due to inactivity. So let mac80211 submit its own monitoring packet (probe/null) and disconnect on timeout.
Note: We want to keep firmware keep alive to prevent kick-off when host is in suspend-to-mem (no mac80211 monitor packet). Ideally fw keep alive should be enabled in suspend path and disabled in resume path to prevent having both firmware and mac80211 submitting periodic null packets.
This fixes non detected AP leaving issues in active mode (nothing monitors beacon or connection).
Cc: stable@vger.kernel.org Fixes: 8def9ec46a5f ("wcn36xx: Enable firmware link monitoring") Signed-off-by: Loic Poulain loic.poulain@linaro.org
I'll queue this to v5.15.
On 31/08/2021 07:44, Kalle Valo wrote:
Loic Poulain loic.poulain@linaro.org writes:
This reverts commit wcn->hw, CONNECTION_MONITOR.
The firmware keep-alive does not cause any event in case of error such as non acked. It's just a basic keep alive to prevent the AP to kick-off the station due to inactivity. So let mac80211 submit its own monitoring packet (probe/null) and disconnect on timeout.
Note: We want to keep firmware keep alive to prevent kick-off when host is in suspend-to-mem (no mac80211 monitor packet). Ideally fw keep alive should be enabled in suspend path and disabled in resume path to prevent having both firmware and mac80211 submitting periodic null packets.
This fixes non detected AP leaving issues in active mode (nothing monitors beacon or connection).
Cc: stable@vger.kernel.org Fixes: 8def9ec46a5f ("wcn36xx: Enable firmware link monitoring") Signed-off-by: Loic Poulain loic.poulain@linaro.org
I'll queue this to v5.15.
Might want to hold off on that.
Its been reported by testing that wcn36xx_smd_delete_sta_context_ind() actually _is_ firing.
But if you look at wcn36xx_smd_delete_sta_context_ind() it doesn't seem to do ieee80211_connection_loss() like it presumably should.
I think the right fix here might be to call ieee80211_connection_loss() in wcn36xx_smd_delete_sta_context_ind() if (wcn->hw & CONNECTION_MONITOR)
--- bod
On 01/09/2021 00:51, Bryan O'Donoghue wrote:
On 31/08/2021 07:44, Kalle Valo wrote:
Loic Poulain loic.poulain@linaro.org writes:
This reverts commit wcn->hw, CONNECTION_MONITOR.
The firmware keep-alive does not cause any event in case of error such as non acked. It's just a basic keep alive to prevent the AP to kick-off the station due to inactivity. So let mac80211 submit its own monitoring packet (probe/null) and disconnect on timeout.
Note: We want to keep firmware keep alive to prevent kick-off when host is in suspend-to-mem (no mac80211 monitor packet). Ideally fw keep alive should be enabled in suspend path and disabled in resume path to prevent having both firmware and mac80211 submitting periodic null packets.
This fixes non detected AP leaving issues in active mode (nothing monitors beacon or connection).
Cc: stable@vger.kernel.org Fixes: 8def9ec46a5f ("wcn36xx: Enable firmware link monitoring") Signed-off-by: Loic Poulain loic.poulain@linaro.org
I'll queue this to v5.15.
Might want to hold off on that.
Its been reported by testing that wcn36xx_smd_delete_sta_context_ind() actually _is_ firing.
But if you look at wcn36xx_smd_delete_sta_context_ind() it doesn't seem to do ieee80211_connection_loss() like it presumably should.
I think the right fix here might be to call ieee80211_connection_loss() in wcn36xx_smd_delete_sta_context_ind() if (wcn->hw & CONNECTION_MONITOR)
bod
In that case right now if (wcn->hw & CONNECTION_MONITOR) we'd presumably rely on a subsequent wcn36xx_smd_missed_beacon_ind() but...
its not clear that wcn36xx_smd_missed_beacon_ind() would fire subsequent to wcn36xx_smd_delete_sta_context_ind()
In fact, it would be pretty illogical if it did.
I think instead of revert - we want to just do better processing here in wcn36xx_smd_delete_sta_context_ind() alright.
--- bod
Bryan O'Donoghue bryan.odonoghue@linaro.org writes:
On 01/09/2021 00:51, Bryan O'Donoghue wrote:
On 31/08/2021 07:44, Kalle Valo wrote:
Loic Poulain loic.poulain@linaro.org writes:
This reverts commit wcn->hw, CONNECTION_MONITOR.
The firmware keep-alive does not cause any event in case of error such as non acked. It's just a basic keep alive to prevent the AP to kick-off the station due to inactivity. So let mac80211 submit its own monitoring packet (probe/null) and disconnect on timeout.
Note: We want to keep firmware keep alive to prevent kick-off when host is in suspend-to-mem (no mac80211 monitor packet). Ideally fw keep alive should be enabled in suspend path and disabled in resume path to prevent having both firmware and mac80211 submitting periodic null packets.
This fixes non detected AP leaving issues in active mode (nothing monitors beacon or connection).
Cc: stable@vger.kernel.org Fixes: 8def9ec46a5f ("wcn36xx: Enable firmware link monitoring") Signed-off-by: Loic Poulain loic.poulain@linaro.org
I'll queue this to v5.15.
Might want to hold off on that.
Its been reported by testing that wcn36xx_smd_delete_sta_context_ind() actually _is_ firing.
But if you look at wcn36xx_smd_delete_sta_context_ind() it doesn't seem to do ieee80211_connection_loss() like it presumably should.
I think the right fix here might be to call ieee80211_connection_loss() in wcn36xx_smd_delete_sta_context_ind() if (wcn->hw & CONNECTION_MONITOR)
bod
In that case right now if (wcn->hw & CONNECTION_MONITOR) we'd presumably rely on a subsequent wcn36xx_smd_missed_beacon_ind() but...
its not clear that wcn36xx_smd_missed_beacon_ind() would fire subsequent to wcn36xx_smd_delete_sta_context_ind()
In fact, it would be pretty illogical if it did.
I think instead of revert - we want to just do better processing here in wcn36xx_smd_delete_sta_context_ind() alright.
Ok, I'll drop this patch.
On 30/08/2021 18:09, Loic Poulain wrote:
This reverts commit 8def9ec46a5fafc0abcf34489a9e8a787bca984d.
The firmware keep-alive does not cause any event in case of error such as non acked. It's just a basic keep alive to prevent the AP to kick-off the station due to inactivity. So let mac80211 submit its own monitoring packet (probe/null) and disconnect on timeout.
Note: We want to keep firmware keep alive to prevent kick-off when host is in suspend-to-mem (no mac80211 monitor packet). Ideally fw keep alive should be enabled in suspend path and disabled in resume path to prevent having both firmware and mac80211 submitting periodic null packets.
This fixes non detected AP leaving issues in active mode (nothing monitors beacon or connection).
Cc: stable@vger.kernel.org Fixes: 8def9ec46a5f ("wcn36xx: Enable firmware link monitoring") Signed-off-by: Loic Poulain loic.poulain@linaro.org
drivers/net/wireless/ath/wcn36xx/main.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index 216bc34..128d25d 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1362,7 +1362,6 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn) ieee80211_hw_set(wcn->hw, HAS_RATE_CONTROL); ieee80211_hw_set(wcn->hw, SINGLE_SCAN_ON_ALL_BANDS); ieee80211_hw_set(wcn->hw, REPORTS_TX_ACK_STATUS);
- ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR);
wcn->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP) |
OK.
We've made a good effort to resolve offloaded link monitoring but, it feels like spaghetti code and isn't as reliable as letting Linux do the link monitoring.
Let's go ahead with the reversion.
Acked-by: Bryan O'Donoghue bryan.odonoghue@linaro.org
linux-stable-mirror@lists.linaro.org