From: Francesco Dolcini francesco.dolcini@toradex.com

Add fsl,pps-channel property to select where to connect the PPS signal. This depends on the internal SoC routing and on the board, for example on the i.MX8 SoC it can be connected to an external pin (using channel 1) or to internal eDMA as DMA request (channel 0).

Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com Acked-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: Paolo Abeni pabeni@redhat.com (cherry picked from commit 1aa772be0444a2bd06957f6d31865e80e6ae4244) Signed-off-by: Csókás, Bence csokas.bence@prolan.hu --- Documentation/devicetree/bindings/net/fsl,fec.yaml | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index 5536c06139ca..24e863fdbdab 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -183,6 +183,13 @@ properties: description: Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.

+ fsl,pps-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Specifies to which timer instance the PPS signal is routed. + enum: [0, 1, 2, 3] + mdio: $ref: mdio.yaml# unevaluatedProperties: false

From: Francesco Dolcini francesco.dolcini@toradex.com

Preparation patch to allow for PPS channel configuration, no functional change intended.

Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com Reviewed-by: Frank Li Frank.Li@nxp.com Reviewed-by: Csókás, Bence csokas.bence@prolan.hu Signed-off-by: Paolo Abeni pabeni@redhat.com (cherry picked from commit bf8ca67e21671e7a56e31da45360480b28f185f1) Signed-off-by: Csókás, Bence csokas.bence@prolan.hu --- drivers/net/ethernet/freescale/fec_ptp.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index a4eb6edb850a..37e1c895f1b8 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -84,8 +84,7 @@ #define FEC_CC_MULT (1 << 31) #define FEC_COUNTER_PERIOD (1 << 31) #define PPS_OUPUT_RELOAD_PERIOD NSEC_PER_SEC -#define FEC_CHANNLE_0 0 -#define DEFAULT_PPS_CHANNEL FEC_CHANNLE_0 +#define DEFAULT_PPS_CHANNEL 0

#define FEC_PTP_MAX_NSEC_PERIOD 4000000000ULL #define FEC_PTP_MAX_NSEC_COUNTER 0x80000000ULL @@ -524,8 +523,9 @@ static int fec_ptp_enable(struct ptp_clock_info *ptp, unsigned long flags; int ret = 0;

+ fep->pps_channel = DEFAULT_PPS_CHANNEL; + if (rq->type == PTP_CLK_REQ_PPS) { - fep->pps_channel = DEFAULT_PPS_CHANNEL; fep->reload_period = PPS_OUPUT_RELOAD_PERIOD;

ret = fec_ptp_enable_pps(fep, on); @@ -536,10 +536,9 @@ static int fec_ptp_enable(struct ptp_clock_info *ptp, if (rq->perout.flags) return -EOPNOTSUPP;

- if (rq->perout.index != DEFAULT_PPS_CHANNEL) + if (rq->perout.index != fep->pps_channel) return -EOPNOTSUPP;

- fep->pps_channel = DEFAULT_PPS_CHANNEL; period.tv_sec = rq->perout.period.sec; period.tv_nsec = rq->perout.period.nsec; period_ns = timespec64_to_ns(&period);

From: Francesco Dolcini francesco.dolcini@toradex.com

Depending on the SoC where the FEC is integrated into the PPS channel might be routed to different timer instances. Make this configurable from the devicetree.

When the related DT property is not present fallback to the previous default and use channel 0.

Reviewed-by: Frank Li Frank.Li@nxp.com Tested-by: Rafael Beims rafael.beims@toradex.com Signed-off-by: Francesco Dolcini francesco.dolcini@toradex.com Reviewed-by: Csókás, Bence csokas.bence@prolan.hu Signed-off-by: Paolo Abeni pabeni@redhat.com (cherry picked from commit 566c2d83887f0570056833102adc5b88e681b0c7) Signed-off-by: Csókás, Bence csokas.bence@prolan.hu --- drivers/net/ethernet/freescale/fec_ptp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index 37e1c895f1b8..7f6b57432071 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -523,8 +523,6 @@ static int fec_ptp_enable(struct ptp_clock_info *ptp, unsigned long flags; int ret = 0;

- fep->pps_channel = DEFAULT_PPS_CHANNEL; - if (rq->type == PTP_CLK_REQ_PPS) { fep->reload_period = PPS_OUPUT_RELOAD_PERIOD;

@@ -706,12 +704,16 @@ void fec_ptp_init(struct platform_device *pdev, int irq_idx) { struct net_device *ndev = platform_get_drvdata(pdev); struct fec_enet_private *fep = netdev_priv(ndev); + struct device_node *np = fep->pdev->dev.of_node; int irq; int ret;

fep->ptp_caps.owner = THIS_MODULE; strscpy(fep->ptp_caps.name, "fec ptp", sizeof(fep->ptp_caps.name));

+ fep->pps_channel = DEFAULT_PPS_CHANNEL; + of_property_read_u32(np, "fsl,pps-channel", &fep->pps_channel); + fep->ptp_caps.max_adj = 250000000; fep->ptp_caps.n_alarm = 0; fep->ptp_caps.n_ext_ts = 0;