From: Lee Jones lee.jones@linaro.org

Supply additional checks in order to prevent unexpected results.

Fixes: b892bf75b2034 ("ion: Switch ion to use dma-buf") Suggested-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/staging/android/ion/ion.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/drivers/staging/android/ion/ion.c +++ b/drivers/staging/android/ion/ion.c @@ -489,6 +489,9 @@ static void *ion_buffer_kmap_get(struct void *vaddr;

if (buffer->kmap_cnt) { + if (buffer->kmap_cnt == INT_MAX) + return ERR_PTR(-EOVERFLOW); + buffer->kmap_cnt++; return buffer->vaddr; } @@ -509,6 +512,9 @@ static void *ion_handle_kmap_get(struct void *vaddr;

if (handle->kmap_cnt) { + if (handle->kmap_cnt == INT_MAX) + return ERR_PTR(-EOVERFLOW); + handle->kmap_cnt++; return buffer->vaddr; }

From: Mingjie Zhang superzmj@fibocom.com

commit 88459e3e42760abb2299bbf6cb1026491170e02a upstream.

Update the USB serial option driver support for the Fibocom FM101-GL Cat.6 LTE modules as there are actually several different variants. - VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) - VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb interface for /Linux/Chrome OS)

0x01a2: mbim, tty, tty, diag, gnss 0x01a4: mbim, diag, tty, adb, gnss, gnss

Here are the outputs of lsusb -v and usb-devices:

T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a2 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=673326ce C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)

Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2cb7 idProduct 0x01a2 bcdDevice 5.04 iManufacturer 1 Fibocom Wireless Inc. iProduct 2 Fibocom FM101-GL Module iSerial 3 673326ce bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x015d bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 MBIM_DUN_DUN_DIAG_NMEA bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 5 Fibocom FM101-GL LTE Modem CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 2048 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 6 MBIM Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0

T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a4 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=673326ce C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none)

Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2cb7 idProduct 0x01a4 bcdDevice 5.04 iManufacturer 1 Fibocom Wireless Inc. iProduct 2 Fibocom FM101-GL Module iSerial 3 673326ce bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0180 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 4 MBIM_DIAG_DUN_ADB_GNSS_GNSS bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 5 Fibocom FM101-GL LTE Modem CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 2048 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 6 MBIM Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 8 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0

Signed-off-by: Mingjie Zhang superzmj@fibocom.com Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2074,6 +2074,9 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */ + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */

From: Mathias Nyman mathias.nyman@linux.intel.com

commit 6cca13de26eea6d32a98d96d916a048d16a12822 upstream.

Fix the circular lock dependency and unbalanced unlock of addess0_mutex introduced when fixing an address0_mutex enumeration retry race in commit ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")

Make sure locking order between port_dev->status_lock and address0_mutex is correct, and that address0_mutex is not unlocked in hub_port_connect "done:" codepath which may be reached without locking address0_mutex

Fixes: 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") Cc: stable@vger.kernel.org Reported-by: Marek Szyprowski m.szyprowski@samsung.com Tested-by: Hans de Goede hdegoede@redhat.com Tested-by: Marek Szyprowski m.szyprowski@samsung.com Acked-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20211123101656.1113518-1-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/hub.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)

--- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4835,6 +4835,7 @@ static void hub_port_connect(struct usb_ struct usb_port *port_dev = hub->ports[port1 - 1]; struct usb_device *udev = port_dev->child; static int unreliable_port = -1; + bool retry_locked;

/* Disconnect any existing devices under this port */ if (udev) { @@ -4891,9 +4892,10 @@ static void hub_port_connect(struct usb_

status = 0;

- mutex_lock(hcd->address0_mutex); - for (i = 0; i < SET_CONFIG_TRIES; i++) { + usb_lock_port(port_dev); + mutex_lock(hcd->address0_mutex); + retry_locked = true;

/* reallocate for each attempt, since references * to the previous one can escape in various ways @@ -4902,6 +4904,8 @@ static void hub_port_connect(struct usb_ if (!udev) { dev_err(&port_dev->dev, "couldn't allocate usb_device\n"); + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); goto done; }

@@ -4923,13 +4927,13 @@ static void hub_port_connect(struct usb_ }

/* reset (non-USB 3.0 devices) and get descriptor */ - usb_lock_port(port_dev); status = hub_port_init(hub, udev, port1, i); - usb_unlock_port(port_dev); if (status < 0) goto loop;

mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + retry_locked = false;

if (udev->quirks & USB_QUIRK_DELAY_INIT) msleep(2000); @@ -5019,11 +5023,14 @@ static void hub_port_connect(struct usb_

loop_disable: hub_port_disable(hub, port1, 1); - mutex_lock(hcd->address0_mutex); loop: usb_ep0_reinit(udev); release_devnum(udev); hub_free_dev(udev); + if (retry_locked) { + mutex_unlock(hcd->address0_mutex); + usb_unlock_port(port_dev); + } usb_put_dev(udev); if ((status == -ENOTCONN) || (status == -ENOTSUPP)) break; @@ -5046,8 +5053,6 @@ loop: }

done: - mutex_unlock(hcd->address0_mutex); - hub_port_disable(hub, port1, 1); if (hcd->driver->relinquish_port && !hub->hdev->parent) { if (status != -ENOTCONN && status != -ENODEV)

From: Takashi Iwai tiwai@suse.de

commit 76c47183224c86e4011048b80f0e2d0d166f01c2 upstream.

The master and next_conj of rcs_ops are used for iterating the resource list entries, and currently those are supposed to return the current value. The problem is that next_conf may go over the last entry before the loop abort condition is evaluated, and it may return the "current" value that is beyond the array size. It was caught recently as a GPF, for example.

Those return values are, however, never actually evaluated, hence basically we don't have to consider the current value as the return at all. By dropping those return values, the potential out-of-range access above is also fixed automatically.

This patch changes the return type of master and next_conj callbacks to void and drop the superfluous code accordingly.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214985 Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211118215729.26257-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/ctxfi/ctamixer.c | 14 ++++++-------- sound/pci/ctxfi/ctdaio.c | 16 ++++++++-------- sound/pci/ctxfi/ctresource.c | 7 +++---- sound/pci/ctxfi/ctresource.h | 4 ++-- sound/pci/ctxfi/ctsrc.c | 7 +++---- 5 files changed, 22 insertions(+), 26 deletions(-)

--- a/sound/pci/ctxfi/ctamixer.c +++ b/sound/pci/ctxfi/ctamixer.c @@ -27,16 +27,15 @@

#define BLANK_SLOT 4094

-static int amixer_master(struct rsc *rsc) +static void amixer_master(struct rsc *rsc) { rsc->conj = 0; - return rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0]; + rsc->idx = container_of(rsc, struct amixer, rsc)->idx[0]; }

-static int amixer_next_conj(struct rsc *rsc) +static void amixer_next_conj(struct rsc *rsc) { rsc->conj++; - return container_of(rsc, struct amixer, rsc)->idx[rsc->conj]; }

static int amixer_index(const struct rsc *rsc) @@ -335,16 +334,15 @@ int amixer_mgr_destroy(struct amixer_mgr

/* SUM resource management */

-static int sum_master(struct rsc *rsc) +static void sum_master(struct rsc *rsc) { rsc->conj = 0; - return rsc->idx = container_of(rsc, struct sum, rsc)->idx[0]; + rsc->idx = container_of(rsc, struct sum, rsc)->idx[0]; }

-static int sum_next_conj(struct rsc *rsc) +static void sum_next_conj(struct rsc *rsc) { rsc->conj++; - return container_of(rsc, struct sum, rsc)->idx[rsc->conj]; }

static int sum_index(const struct rsc *rsc) --- a/sound/pci/ctxfi/ctdaio.c +++ b/sound/pci/ctxfi/ctdaio.c @@ -55,12 +55,12 @@ static struct daio_rsc_idx idx_20k2[NUM_ [SPDIFIO] = {.left = 0x05, .right = 0x85}, };

-static int daio_master(struct rsc *rsc) +static void daio_master(struct rsc *rsc) { /* Actually, this is not the resource index of DAIO. * For DAO, it is the input mapper index. And, for DAI, * it is the output time-slot index. */ - return rsc->conj = rsc->idx; + rsc->conj = rsc->idx; }

static int daio_index(const struct rsc *rsc) @@ -68,19 +68,19 @@ static int daio_index(const struct rsc * return rsc->conj; }

-static int daio_out_next_conj(struct rsc *rsc) +static void daio_out_next_conj(struct rsc *rsc) { - return rsc->conj += 2; + rsc->conj += 2; }

-static int daio_in_next_conj_20k1(struct rsc *rsc) +static void daio_in_next_conj_20k1(struct rsc *rsc) { - return rsc->conj += 0x200; + rsc->conj += 0x200; }

-static int daio_in_next_conj_20k2(struct rsc *rsc) +static void daio_in_next_conj_20k2(struct rsc *rsc) { - return rsc->conj += 0x100; + rsc->conj += 0x100; }

static const struct rsc_ops daio_out_rsc_ops = { --- a/sound/pci/ctxfi/ctresource.c +++ b/sound/pci/ctxfi/ctresource.c @@ -113,18 +113,17 @@ static int audio_ring_slot(const struct return (rsc->conj << 4) + offset_in_audio_slot_block[rsc->type]; }

-static int rsc_next_conj(struct rsc *rsc) +static void rsc_next_conj(struct rsc *rsc) { unsigned int i; for (i = 0; (i < 8) && (!(rsc->msr & (0x1 << i))); ) i++; rsc->conj += (AUDIO_SLOT_BLOCK_NUM >> i); - return rsc->conj; }

-static int rsc_master(struct rsc *rsc) +static void rsc_master(struct rsc *rsc) { - return rsc->conj = rsc->idx; + rsc->conj = rsc->idx; }

static const struct rsc_ops rsc_generic_ops = { --- a/sound/pci/ctxfi/ctresource.h +++ b/sound/pci/ctxfi/ctresource.h @@ -43,8 +43,8 @@ struct rsc { };

struct rsc_ops { - int (*master)(struct rsc *rsc); /* Move to master resource */ - int (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */ + void (*master)(struct rsc *rsc); /* Move to master resource */ + void (*next_conj)(struct rsc *rsc); /* Move to next conjugate resource */ int (*index)(const struct rsc *rsc); /* Return the index of resource */ /* Return the output slot number */ int (*output_slot)(const struct rsc *rsc); --- a/sound/pci/ctxfi/ctsrc.c +++ b/sound/pci/ctxfi/ctsrc.c @@ -594,16 +594,15 @@ int src_mgr_destroy(struct src_mgr *src_

/* SRCIMP resource manager operations */

-static int srcimp_master(struct rsc *rsc) +static void srcimp_master(struct rsc *rsc) { rsc->conj = 0; - return rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0]; + rsc->idx = container_of(rsc, struct srcimp, rsc)->idx[0]; }

-static int srcimp_next_conj(struct rsc *rsc) +static void srcimp_next_conj(struct rsc *rsc) { rsc->conj++; - return container_of(rsc, struct srcimp, rsc)->idx[rsc->conj]; }

static int srcimp_index(const struct rsc *rsc)

From: Miklos Szeredi mszeredi@redhat.com

commit 712a951025c0667ff00b25afc360f74e639dfabe upstream.

It is possible to trigger a crash by splicing anon pipe bufs to the fuse device.

The reason for this is that anon_pipe_buf_release() will reuse buf->page if the refcount is 1, but that page might have already been stolen and its flags modified (e.g. PG_lru added).

This happens in the unlikely case of fuse_dev_splice_write() getting around to calling pipe_buf_release() after a page has been stolen, added to the page cache and removed from the page cache.

Fix by calling pipe_buf_release() right after the page was inserted into the page cache. In this case the page has an elevated refcount so any release function will know that the page isn't reusable.

Reported-by: Frank Dinoff fdinoff@google.com Link: https://lore.kernel.org/r/CAAmZXrsGg2xsP1CK+cbuEMumtrqdvD-NKnWzhNcvn71RV3c1y... Fixes: dd3bb14f44a6 ("fuse: support splice() writing to fuse device") Cc: stable@vger.kernel.org # v2.6.35 Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/fuse/dev.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -898,6 +898,12 @@ static int fuse_try_move_page(struct fus goto out_put_old; }

+ /* + * Release while we have extra ref on stolen page. Otherwise + * anon_pipe_buf_release() might think the page can be reused. + */ + pipe_buf_release(cs->pipe, buf); + get_page(newpage);

if (!(buf->flags & PIPE_BUF_FLAG_LRU)) @@ -2040,8 +2046,12 @@ static ssize_t fuse_dev_splice_write(str

pipe_lock(pipe); out_free: - for (idx = 0; idx < nbuf; idx++) - pipe_buf_release(pipe, &bufs[idx]); + for (idx = 0; idx < nbuf; idx++) { + struct pipe_buffer *buf = &bufs[idx]; + + if (buf->ops) + pipe_buf_release(pipe, buf); + } pipe_unlock(pipe);

kfree(bufs);

From: Stefano Stabellini stefano.stabellini@xilinx.com

commit 36e8f60f0867d3b70d398d653c17108459a04efe upstream.

If the xenstore page hasn't been allocated properly, reading the value of the related hvm_param (HVM_PARAM_STORE_PFN) won't actually return error. Instead, it will succeed and return zero. Instead of attempting to xen_remap a bad guest physical address, detect this condition and return early.

Note that although a guest physical address of zero for HVM_PARAM_STORE_PFN is theoretically possible, it is not a good choice and zero has never been validly used in that capacity.

Also recognize all bits set as an invalid value.

For 32-bit Linux, any pfn above ULONG_MAX would get truncated. Pfns above ULONG_MAX should never be passed by the Xen tools to HVM guests anyway, so check for this condition and return early.

Cc: stable@vger.kernel.org Signed-off-by: Stefano Stabellini stefano.stabellini@xilinx.com Reviewed-by: Juergen Gross jgross@suse.com Reviewed-by: Jan Beulich jbeulich@suse.com Link: https://lore.kernel.org/r/20211123210748.1910236-1-sstabellini@kernel.org Signed-off-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/xen/xenbus/xenbus_probe.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

--- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -804,6 +804,29 @@ static int __init xenbus_init(void) err = hvm_get_parameter(HVM_PARAM_STORE_PFN, &v); if (err) goto out_error; + /* + * Uninitialized hvm_params are zero and return no error. + * Although it is theoretically possible to have + * HVM_PARAM_STORE_PFN set to zero on purpose, in reality it is + * not zero when valid. If zero, it means that Xenstore hasn't + * been properly initialized. Instead of attempting to map a + * wrong guest physical address return error. + * + * Also recognize all bits set as an invalid value. + */ + if (!v || !~v) { + err = -ENOENT; + goto out_error; + } + /* Avoid truncation on 32-bit. */ +#if BITS_PER_LONG == 32 + if (v > ULONG_MAX) { + pr_err("%s: cannot handle HVM_PARAM_STORE_PFN=%llx > ULONG_MAX\n", + __func__, v); + err = -EINVAL; + goto out_error; + } +#endif xen_store_gfn = (unsigned long)v; xen_store_interface = xen_remap(xen_store_gfn << XEN_PAGE_SHIFT,

From: Florian Fainelli f.fainelli@gmail.com

[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ]

The GPIO controller is also an interrupt controller provider and is currently missing the appropriate 'interrupt-controller' and '#interrupt-cells' properties to denote that.

Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/bcm5301x.dtsi | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 4616452ce74de..e0f96be549f14 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -234,6 +234,8 @@ chipcommon: chipcommon@0 {

gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; };

usb2: usb2@21000 {

From: Alexander Aring aahringo@redhat.com

[ Upstream commit 451dc48c806a7ce9fbec5e7a24ccf4b2c936e834 ]

This patch fixes an issue that an u32 netlink value is handled as a signed enum value which doesn't fit into the range of u32 netlink type. If it's handled as -1 value some BIT() evaluation ends in a shift-out-of-bounds issue. To solve the issue we set the to u32 max which is s32 "-1" value to keep backwards compatibility and let the followed enum values start counting at 0. This brings the compiler to never handle the enum as signed and a check if the value is above NL802154_IFTYPE_MAX should filter -1 out.

Fixes: f3ea5e44231a ("ieee802154: add new interface command") Signed-off-by: Alexander Aring aahringo@redhat.com Link: https://lore.kernel.org/r/20211112030916.685793-1-aahringo@redhat.com Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/nl802154.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/net/nl802154.h b/include/net/nl802154.h index ddcee128f5d9a..145acb8f25095 100644 --- a/include/net/nl802154.h +++ b/include/net/nl802154.h @@ -19,6 +19,8 @@ * */

+#include <linux/types.h> + #define NL802154_GENL_NAME "nl802154"

enum nl802154_commands { @@ -150,10 +152,9 @@ enum nl802154_attrs { };

enum nl802154_iftype { - /* for backwards compatibility TODO */ - NL802154_IFTYPE_UNSPEC = -1, + NL802154_IFTYPE_UNSPEC = (~(__u32)0),

- NL802154_IFTYPE_NODE, + NL802154_IFTYPE_NODE = 0, NL802154_IFTYPE_MONITOR, NL802154_IFTYPE_COORD,

From: Takashi Iwai tiwai@suse.de

[ Upstream commit 187bea472600dcc8d2eb714335053264dd437172 ]

When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential buffer overflow and panics. The code in sofcpga bootstrapping contains the memcpy() calls are mistakenly translated as the shorter size, hence it triggers a panic as if it were overflowing.

This patch changes the secondary_trampoline and *_end definitions to arrays for avoiding the false-positive crash above.

Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga") Suggested-by: Kees Cook keescook@chromium.org Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473 Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Dinh Nguyen dinguyen@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-socfpga/core.h | 2 +- arch/arm/mach-socfpga/platsmp.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 65e1817d8afe6..692a287a8712d 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -48,7 +48,7 @@ extern void __iomem *sdr_ctl_base_addr; u32 socfpga_sdram_self_refresh(u32 sdr_base); extern unsigned int socfpga_sdram_self_refresh_sz;

-extern char secondary_trampoline, secondary_trampoline_end; +extern char secondary_trampoline[], secondary_trampoline_end[];

extern unsigned long socfpga_cpu1start_addr;

diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 07945748b5714..1dfc9e7389a74 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -31,14 +31,14 @@

static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; + int trampoline_size = secondary_trampoline_end - secondary_trampoline;

if (socfpga_cpu1start_addr) { /* This will put CPU #1 into reset. */ writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);

- memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); + memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);

writel(virt_to_phys(secondary_startup), sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff)); @@ -56,12 +56,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)

static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle) { - int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; + int trampoline_size = secondary_trampoline_end - secondary_trampoline;

if (socfpga_cpu1start_addr) { writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_MODMPURST); - memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); + memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);

writel(virt_to_phys(secondary_startup), sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 96c5f82ef0a145d3e56e5b26f2bf6dcd2ffeae1c ]

The ->gem_create_object() functions are supposed to return NULL if there is an error. None of the callers expect error pointers so returing one will lead to an Oops. See drm_gem_vram_create(), for example.

Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://patchwork.freedesktop.org/patch/msgid/20211118111416.GC1147@kili Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/vc4/vc4_bo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c index d53e805d392f9..64fc99cf54d5b 100644 --- a/drivers/gpu/drm/vc4/vc4_bo.c +++ b/drivers/gpu/drm/vc4/vc4_bo.c @@ -198,7 +198,7 @@ struct drm_gem_object *vc4_create_object(struct drm_device *dev, size_t size)

bo = kzalloc(sizeof(*bo), GFP_KERNEL); if (!bo) - return ERR_PTR(-ENOMEM); + return NULL;

mutex_lock(&vc4->bo_lock); vc4->bo_stats.num_allocated++;

From: Eric Dumazet edumazet@google.com

[ Upstream commit 4e1fddc98d2585ddd4792b5e44433dcee7ece001 ]

While testing BIG TCP patch series, I was expecting that TCP_RR workloads with 80KB requests/answers would send one 80KB TSO packet, then being received as a single GRO packet.

It turns out this was not happening, and the root cause was that cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC.

Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC needed a budget of ~20 segments.

Ideally these TCP_RR flows should not exit slow start.

Cubic Hystart should reset itself at each round, instead of assuming every TCP flow is a bulk one.

Note that even after this patch, Hystart can still trigger, depending on scheduling artifacts, but at a higher CWND/SSTHRESH threshold, keeping optimal TSO packet sizes.

Tested:

ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072 nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests"

Before:

8605 Ip6InReceives 87541 0.0 Ip6OutRequests 129496 0.0 TcpExtTCPHystartTrainDetect 1 0.0 TcpExtTCPHystartTrainCwnd 30 0.0

After:

8760 Ip6InReceives 88514 0.0 Ip6OutRequests 87975 0.0

Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3") Co-developed-by: Neal Cardwell ncardwell@google.com Signed-off-by: Neal Cardwell ncardwell@google.com Signed-off-by: Eric Dumazet edumazet@google.com Cc: Stephen Hemminger stephen@networkplumber.org Cc: Yuchung Cheng ycheng@google.com Cc: Soheil Hassas Yeganeh soheil@google.com Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp_cubic.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/tcp_cubic.c b/net/ipv4/tcp_cubic.c index 00397c6add202..d710c519a0357 100644 --- a/net/ipv4/tcp_cubic.c +++ b/net/ipv4/tcp_cubic.c @@ -342,8 +342,6 @@ static void bictcp_cong_avoid(struct sock *sk, u32 ack, u32 acked) return;

if (tcp_in_slow_start(tp)) { - if (hystart && after(ack, ca->end_seq)) - bictcp_hystart_reset(sk); acked = tcp_slow_start(tp, acked); if (!acked) return; @@ -394,6 +392,9 @@ static void hystart_update(struct sock *sk, u32 delay) if (ca->found & hystart_detect) return;

+ if (after(tp->snd_una, ca->end_seq)) + bictcp_hystart_reset(sk); + if (hystart_detect & HYSTART_ACK_TRAIN) { u32 now = bictcp_clock();

From: Nadav Amit namit@vmware.com

commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream.

When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB flush is missing. This TLB flush must be performed before releasing the i_mmap_rwsem, in order to prevent an unshared PMDs page from being released and reused before the TLB flush took place.

Arguably, a comprehensive solution would use mmu_gather interface to batch the TLB flushes and the PMDs page release, however it is not an easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2) deferring the release of the page reference for the PMDs page until after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into thinking PMDs are shared when they are not.

Fix __unmap_hugepage_range() by adding the missing TLB flush, and forcing a flush when unshare is successful.

Fixes: 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6 Signed-off-by: Nadav Amit namit@vmware.com Reviewed-by: Mike Kravetz mike.kravetz@oracle.com Cc: Aneesh Kumar K.V aneesh.kumar@linux.vnet.ibm.com Cc: KAMEZAWA Hiroyuki kamezawa.hiroyu@jp.fujitsu.com Cc: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arm/include/asm/tlb.h | 8 ++++++++ arch/ia64/include/asm/tlb.h | 10 ++++++++++ arch/s390/include/asm/tlb.h | 14 ++++++++++++++ arch/sh/include/asm/tlb.h | 10 ++++++++++ arch/um/include/asm/tlb.h | 12 ++++++++++++ include/asm-generic/tlb.h | 2 ++ mm/hugetlb.c | 19 +++++++++++++++++++ mm/memory.c | 16 ++++++++++++++++ 8 files changed, 91 insertions(+)

--- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -278,6 +278,14 @@ tlb_remove_pmd_tlb_entry(struct mmu_gath tlb_add_flush(tlb, addr); }

+static inline void +tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address, + unsigned long size) +{ + tlb_add_flush(tlb, address); + tlb_add_flush(tlb, address + size - PMD_SIZE); +} + #define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) #define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr) #define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp) --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -272,6 +272,16 @@ __tlb_remove_tlb_entry (struct mmu_gathe tlb->end_addr = address + PAGE_SIZE; }

+static inline void +tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address, + unsigned long size) +{ + if (tlb->start_addr > address) + tlb->start_addr = address; + if (tlb->end_addr < address + size) + tlb->end_addr = address + size; +} + #define tlb_migrate_finish(mm) platform_tlb_migrate_finish(mm)

#define tlb_start_vma(tlb, vma) do { } while (0) --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -116,6 +116,20 @@ static inline void tlb_remove_page_size( return tlb_remove_page(tlb, page); }

+static inline void tlb_flush_pmd_range(struct mmu_gather *tlb, + unsigned long address, unsigned long size) +{ + /* + * the range might exceed the original range that was provided to + * tlb_gather_mmu(), so we need to update it despite the fact it is + * usually not updated. + */ + if (tlb->start > address) + tlb->start = address; + if (tlb->end < address + size) + tlb->end = address + size; +} + /* * pte_free_tlb frees a pte table and clears the CRSTE for the * page table from the tlb. --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -115,6 +115,16 @@ static inline bool __tlb_remove_page_siz return __tlb_remove_page(tlb, page); }

+static inline void +tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address, + unsigned long size) +{ + if (tlb->start > address) + tlb->start = address; + if (tlb->end < address + size) + tlb->end = address + size; +} + static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, struct page *page) { --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -128,6 +128,18 @@ static inline void tlb_remove_page_size( return tlb_remove_page(tlb, page); }

+static inline void +tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address, + unsigned long size) +{ + tlb->need_flush = 1; + + if (tlb->start > address) + tlb->start = address; + if (tlb->end < address + size) + tlb->end = address + size; +} + /** * tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation. * --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -123,6 +123,8 @@ void tlb_finish_mmu(struct mmu_gather *t unsigned long end); extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, int page_size); +void tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address, + unsigned long size);

static inline void __tlb_adjust_range(struct mmu_gather *tlb, unsigned long address) --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -3395,6 +3395,7 @@ void __unmap_hugepage_range(struct mmu_g unsigned long sz = huge_page_size(h); const unsigned long mmun_start = start; /* For mmu_notifiers */ const unsigned long mmun_end = end; /* For mmu_notifiers */ + bool force_flush = false;

WARN_ON(!is_vm_hugetlb_page(vma)); BUG_ON(start & ~huge_page_mask(h)); @@ -3411,6 +3412,8 @@ void __unmap_hugepage_range(struct mmu_g ptl = huge_pte_lock(h, mm, ptep); if (huge_pmd_unshare(mm, &address, ptep)) { spin_unlock(ptl); + tlb_flush_pmd_range(tlb, address & PUD_MASK, PUD_SIZE); + force_flush = true; continue; }

@@ -3467,6 +3470,22 @@ void __unmap_hugepage_range(struct mmu_g } mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end); tlb_end_vma(tlb, vma); + + /* + * If we unshared PMDs, the TLB flush was not recorded in mmu_gather. We + * could defer the flush until now, since by holding i_mmap_rwsem we + * guaranteed that the last refernece would not be dropped. But we must + * do the flushing before we return, as otherwise i_mmap_rwsem will be + * dropped and the last reference to the shared PMDs page might be + * dropped as well. + * + * In theory we could defer the freeing of the PMD pages as well, but + * huge_pmd_unshare() relies on the exact page_count for the PMD page to + * detect sharing, so we cannot defer the release of the page either. + * Instead, do flush now. + */ + if (force_flush) + tlb_flush_mmu(tlb); }

void __unmap_hugepage_range_final(struct mmu_gather *tlb, --- a/mm/memory.c +++ b/mm/memory.c @@ -320,6 +320,22 @@ bool __tlb_remove_page_size(struct mmu_g return false; }

+void tlb_flush_pmd_range(struct mmu_gather *tlb, unsigned long address, + unsigned long size) +{ + if (tlb->page_size != 0 && tlb->page_size != PMD_SIZE) + tlb_flush_mmu(tlb); + + tlb->page_size = PMD_SIZE; + tlb->start = min(tlb->start, address); + tlb->end = max(tlb->end, address + size); + /* + * Track the last address with which we adjusted the range. This + * will be used later to adjust again after a mmu_flush due to + * failed __tlb_remove_page + */ + tlb->addr = address + size - PMD_SIZE; +} #endif /* HAVE_GENERIC_MMU_GATHER */

#ifdef CONFIG_HAVE_RCU_TABLE_FREE

From: David Hildenbrand david@redhat.com

commit c1e63117711977cc4295b2ce73de29dd17066c82 upstream.

To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp":

systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae

Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac().

To fix, properly use clear_user() when we're dealing with a user buffer.

Link: https://lkml.kernel.org/r/20211112092750.6921-1-david@redhat.com Fixes: 997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") Signed-off-by: David Hildenbrand david@redhat.com Acked-by: Baoquan He bhe@redhat.com Cc: Dave Young dyoung@redhat.com Cc: Baoquan He bhe@redhat.com Cc: Vivek Goyal vgoyal@redhat.com Cc: Philipp Rudo prudo@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/proc/vmcore.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/fs/proc/vmcore.c +++ b/fs/proc/vmcore.c @@ -105,14 +105,19 @@ static ssize_t read_from_oldmem(char *bu nr_bytes = count;

/* If pfn is not ram, return zeros for sparse dump files */ - if (pfn_is_ram(pfn) == 0) - memset(buf, 0, nr_bytes); - else { + if (pfn_is_ram(pfn) == 0) { + tmp = 0; + if (!userbuf) + memset(buf, 0, nr_bytes); + else if (clear_user(buf, nr_bytes)) + tmp = -EFAULT; + } else { tmp = copy_oldmem_page(pfn, buf, nr_bytes, offset, userbuf); - if (tmp < 0) - return tmp; } + if (tmp < 0) + return tmp; + *ppos += nr_bytes; count -= nr_bytes; buf += nr_bytes;

From: Miklos Szeredi mszeredi@redhat.com

commit 473441720c8616dfaf4451f9c7ea14f0eb5e5d65 upstream.

Checking buf->flags should be done before the pipe_buf_release() is called on the pipe buffer, since releasing the buffer might modify the flags.

This is exactly what page_cache_pipe_buf_release() does, and which results in the same VM_BUG_ON_PAGE(PageLRU(page)) that the original patch was trying to fix.

Reported-by: Justin Forbes jmforbes@linuxtx.org Fixes: 712a951025c0 ("fuse: fix page stealing") Cc: stable@vger.kernel.org # v2.6.35 Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/fuse/dev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -898,17 +898,17 @@ static int fuse_try_move_page(struct fus goto out_put_old; }

+ get_page(newpage); + + if (!(buf->flags & PIPE_BUF_FLAG_LRU)) + lru_cache_add_file(newpage); + /* * Release while we have extra ref on stolen page. Otherwise * anon_pipe_buf_release() might think the page can be reused. */ pipe_buf_release(cs->pipe, buf);

- get_page(newpage); - - if (!(buf->flags & PIPE_BUF_FLAG_LRU)) - lru_cache_add_file(newpage); - err = 0; spin_lock(&cs->req->waitq.lock); if (test_bit(FR_ABORTED, &cs->req->flags))

From: Juergen Gross jgross@suse.com

commit 71b66243f9898d0e54296b4e7035fb33cdcb0707 upstream.

In order to avoid problems in case the backend is modifying a response on the ring page while the frontend has already seen it, just read the response into a local buffer in one go and then operate on that buffer only.

Signed-off-by: Juergen Gross jgross@suse.com Reviewed-by: Jan Beulich jbeulich@suse.com Acked-by: Roger Pau Monné roger.pau@citrix.com Link: https://lore.kernel.org/r/20210730103854.12681-2-jgross@suse.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/block/xen-blkfront.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-)

--- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1538,7 +1538,7 @@ static bool blkif_completion(unsigned lo static irqreturn_t blkif_interrupt(int irq, void *dev_id) { struct request *req; - struct blkif_response *bret; + struct blkif_response bret; RING_IDX i, rp; unsigned long flags; struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)dev_id; @@ -1556,8 +1556,9 @@ static irqreturn_t blkif_interrupt(int i for (i = rinfo->ring.rsp_cons; i != rp; i++) { unsigned long id;

- bret = RING_GET_RESPONSE(&rinfo->ring, i); - id = bret->id; + RING_COPY_RESPONSE(&rinfo->ring, i, &bret); + id = bret.id; + /* * The backend has messed up and given us an id that we would * never have given to it (we stamp it up to BLK_RING_SIZE - @@ -1565,35 +1566,35 @@ static irqreturn_t blkif_interrupt(int i */ if (id >= BLK_RING_SIZE(info)) { WARN(1, "%s: response to %s has incorrect id (%ld)\n", - info->gd->disk_name, op_name(bret->operation), id); + info->gd->disk_name, op_name(bret.operation), id); /* We can't safely get the 'struct request' as * the id is busted. */ continue; } req = rinfo->shadow[id].request;

- if (bret->operation != BLKIF_OP_DISCARD) { + if (bret.operation != BLKIF_OP_DISCARD) { /* * We may need to wait for an extra response if the * I/O request is split in 2 */ - if (!blkif_completion(&id, rinfo, bret)) + if (!blkif_completion(&id, rinfo, &bret)) continue; }

if (add_id_to_freelist(rinfo, id)) { WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n", - info->gd->disk_name, op_name(bret->operation), id); + info->gd->disk_name, op_name(bret.operation), id); continue; }

- error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO; - switch (bret->operation) { + error = (bret.status == BLKIF_RSP_OKAY) ? 0 : -EIO; + switch (bret.operation) { case BLKIF_OP_DISCARD: - if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) { + if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) { struct request_queue *rq = info->rq; printk(KERN_WARNING "blkfront: %s: %s op failed\n", - info->gd->disk_name, op_name(bret->operation)); + info->gd->disk_name, op_name(bret.operation)); error = -EOPNOTSUPP; info->feature_discard = 0; info->feature_secdiscard = 0; @@ -1604,15 +1605,15 @@ static irqreturn_t blkif_interrupt(int i break; case BLKIF_OP_FLUSH_DISKCACHE: case BLKIF_OP_WRITE_BARRIER: - if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) { + if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) { printk(KERN_WARNING "blkfront: %s: %s op failed\n", - info->gd->disk_name, op_name(bret->operation)); + info->gd->disk_name, op_name(bret.operation)); error = -EOPNOTSUPP; } - if (unlikely(bret->status == BLKIF_RSP_ERROR && + if (unlikely(bret.status == BLKIF_RSP_ERROR && rinfo->shadow[id].req.u.rw.nr_segments == 0)) { printk(KERN_WARNING "blkfront: %s: empty %s op failed\n", - info->gd->disk_name, op_name(bret->operation)); + info->gd->disk_name, op_name(bret.operation)); error = -EOPNOTSUPP; } if (unlikely(error)) { @@ -1625,9 +1626,9 @@ static irqreturn_t blkif_interrupt(int i /* fall through */ case BLKIF_OP_READ: case BLKIF_OP_WRITE: - if (unlikely(bret->status != BLKIF_RSP_OKAY)) + if (unlikely(bret.status != BLKIF_RSP_OKAY)) dev_dbg(&info->xbdev->dev, "Bad return from blkdev data " - "request: %x\n", bret->status); + "request: %x\n", bret.status);

blk_mq_complete_request(req, error); break;

From: Juergen Gross jgross@suse.com

commit b94e4b147fd1992ad450e1fea1fdaa3738753373 upstream.

Today blkfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request.

Introduce a new state of the ring BLKIF_STATE_ERROR which will be switched to in case an inconsistency is being detected. Recovering from this state is possible only via removing and adding the virtual device again (e.g. via a suspend/resume cycle).

Make all warning messages issued due to valid error responses rate limited in order to avoid message floods being triggered by a malicious backend.

Signed-off-by: Juergen Gross jgross@suse.com Reviewed-by: Jan Beulich jbeulich@suse.com Acked-by: Roger Pau Monné roger.pau@citrix.com Link: https://lore.kernel.org/r/20210730103854.12681-4-jgross@suse.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/block/xen-blkfront.c | 70 ++++++++++++++++++++++++++++++++----------- 1 file changed, 53 insertions(+), 17 deletions(-)

--- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -78,6 +78,7 @@ enum blkif_state { BLKIF_STATE_DISCONNECTED, BLKIF_STATE_CONNECTED, BLKIF_STATE_SUSPENDED, + BLKIF_STATE_ERROR, };

struct grant { @@ -87,6 +88,7 @@ struct grant { };

enum blk_req_status { + REQ_PROCESSING, REQ_WAITING, REQ_DONE, REQ_ERROR, @@ -529,7 +531,7 @@ static unsigned long blkif_ring_get_requ

id = get_id_from_freelist(rinfo); rinfo->shadow[id].request = req; - rinfo->shadow[id].status = REQ_WAITING; + rinfo->shadow[id].status = REQ_PROCESSING; rinfo->shadow[id].associated_id = NO_ASSOCIATED_ID;

rinfo->shadow[id].req.u.rw.id = id; @@ -558,6 +560,7 @@ static int blkif_queue_discard_req(struc

/* Copy the request to the ring page. */ *final_ring_req = *ring_req; + rinfo->shadow[id].status = REQ_WAITING;

return 0; } @@ -830,8 +833,11 @@ static int blkif_queue_rw_req(struct req

/* Copy request(s) to the ring page. */ *final_ring_req = *ring_req; - if (unlikely(require_extra_req)) + rinfo->shadow[id].status = REQ_WAITING; + if (unlikely(require_extra_req)) { *final_extra_ring_req = *extra_ring_req; + rinfo->shadow[extra_id].status = REQ_WAITING; + }

if (max_grefs > 0) gnttab_free_grant_references(setup.gref_head); @@ -1401,8 +1407,8 @@ static enum blk_req_status blkif_rsp_to_ static int blkif_get_final_status(enum blk_req_status s1, enum blk_req_status s2) { - BUG_ON(s1 == REQ_WAITING); - BUG_ON(s2 == REQ_WAITING); + BUG_ON(s1 < REQ_DONE); + BUG_ON(s2 < REQ_DONE);

if (s1 == REQ_ERROR || s2 == REQ_ERROR) return BLKIF_RSP_ERROR; @@ -1435,7 +1441,7 @@ static bool blkif_completion(unsigned lo s->status = blkif_rsp_to_req_status(bret->status);

/* Wait the second response if not yet here. */ - if (s2->status == REQ_WAITING) + if (s2->status < REQ_DONE) return 0;

bret->status = blkif_get_final_status(s->status, @@ -1555,11 +1561,17 @@ static irqreturn_t blkif_interrupt(int i

spin_lock_irqsave(&rinfo->ring_lock, flags); again: - rp = rinfo->ring.sring->rsp_prod; - rmb(); /* Ensure we see queued responses up to 'rp'. */ + rp = READ_ONCE(rinfo->ring.sring->rsp_prod); + virt_rmb(); /* Ensure we see queued responses up to 'rp'. */ + if (RING_RESPONSE_PROD_OVERFLOW(&rinfo->ring, rp)) { + pr_alert("%s: illegal number of responses %u\n", + info->gd->disk_name, rp - rinfo->ring.rsp_cons); + goto err; + }

for (i = rinfo->ring.rsp_cons; i != rp; i++) { unsigned long id; + unsigned int op;

RING_COPY_RESPONSE(&rinfo->ring, i, &bret); id = bret.id; @@ -1570,14 +1582,28 @@ static irqreturn_t blkif_interrupt(int i * look in get_id_from_freelist. */ if (id >= BLK_RING_SIZE(info)) { - WARN(1, "%s: response to %s has incorrect id (%ld)\n", - info->gd->disk_name, op_name(bret.operation), id); - /* We can't safely get the 'struct request' as - * the id is busted. */ - continue; + pr_alert("%s: response has incorrect id (%ld)\n", + info->gd->disk_name, id); + goto err; + } + if (rinfo->shadow[id].status != REQ_WAITING) { + pr_alert("%s: response references no pending request\n", + info->gd->disk_name); + goto err; } + + rinfo->shadow[id].status = REQ_PROCESSING; req = rinfo->shadow[id].request;

+ op = rinfo->shadow[id].req.operation; + if (op == BLKIF_OP_INDIRECT) + op = rinfo->shadow[id].req.u.indirect.indirect_op; + if (bret.operation != op) { + pr_alert("%s: response has wrong operation (%u instead of %u)\n", + info->gd->disk_name, bret.operation, op); + goto err; + } + if (bret.operation != BLKIF_OP_DISCARD) { /* * We may need to wait for an extra response if the @@ -1598,7 +1624,8 @@ static irqreturn_t blkif_interrupt(int i case BLKIF_OP_DISCARD: if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) { struct request_queue *rq = info->rq; - printk(KERN_WARNING "blkfront: %s: %s op failed\n", + + pr_warn_ratelimited("blkfront: %s: %s op failed\n", info->gd->disk_name, op_name(bret.operation)); error = -EOPNOTSUPP; info->feature_discard = 0; @@ -1611,13 +1638,13 @@ static irqreturn_t blkif_interrupt(int i case BLKIF_OP_FLUSH_DISKCACHE: case BLKIF_OP_WRITE_BARRIER: if (unlikely(bret.status == BLKIF_RSP_EOPNOTSUPP)) { - printk(KERN_WARNING "blkfront: %s: %s op failed\n", + pr_warn_ratelimited("blkfront: %s: %s op failed\n", info->gd->disk_name, op_name(bret.operation)); error = -EOPNOTSUPP; } if (unlikely(bret.status == BLKIF_RSP_ERROR && rinfo->shadow[id].req.u.rw.nr_segments == 0)) { - printk(KERN_WARNING "blkfront: %s: empty %s op failed\n", + pr_warn_ratelimited("blkfront: %s: empty %s op failed\n", info->gd->disk_name, op_name(bret.operation)); error = -EOPNOTSUPP; } @@ -1632,8 +1659,9 @@ static irqreturn_t blkif_interrupt(int i case BLKIF_OP_READ: case BLKIF_OP_WRITE: if (unlikely(bret.status != BLKIF_RSP_OKAY)) - dev_dbg(&info->xbdev->dev, "Bad return from blkdev data " - "request: %x\n", bret.status); + dev_dbg_ratelimited(&info->xbdev->dev, + "Bad return from blkdev data request: %#x\n", + bret.status);

blk_mq_complete_request(req, error); break; @@ -1657,6 +1685,14 @@ static irqreturn_t blkif_interrupt(int i spin_unlock_irqrestore(&rinfo->ring_lock, flags);

return IRQ_HANDLED; + + err: + info->connected = BLKIF_STATE_ERROR; + + spin_unlock_irqrestore(&rinfo->ring_lock, flags); + + pr_alert("%s disabled for further use\n", info->gd->disk_name); + return IRQ_HANDLED; }

From: Juergen Gross jgross@suse.com

commit 162081ec33c2686afa29d91bf8d302824aa846c7 upstream.

In order to avoid a malicious backend being able to influence the local processing of a request build the request locally first and then copy it to the ring page. Any reading from the request influencing the processing in the frontend needs to be done on the local instance.

Signed-off-by: Juergen Gross jgross@suse.com Reviewed-by: Jan Beulich jbeulich@suse.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/xen-netfront.c | 80 ++++++++++++++++++++------------------------- 1 file changed, 37 insertions(+), 43 deletions(-)

--- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -424,7 +424,8 @@ struct xennet_gnttab_make_txreq { struct netfront_queue *queue; struct sk_buff *skb; struct page *page; - struct xen_netif_tx_request *tx; /* Last request */ + struct xen_netif_tx_request *tx; /* Last request on ring page */ + struct xen_netif_tx_request tx_local; /* Last request local copy*/ unsigned int size; };

@@ -452,30 +453,27 @@ static void xennet_tx_setup_grant(unsign queue->grant_tx_page[id] = page; queue->grant_tx_ref[id] = ref;

- tx->id = id; - tx->gref = ref; - tx->offset = offset; - tx->size = len; - tx->flags = 0; + info->tx_local.id = id; + info->tx_local.gref = ref; + info->tx_local.offset = offset; + info->tx_local.size = len; + info->tx_local.flags = 0; + + *tx = info->tx_local;

info->tx = tx; - info->size += tx->size; + info->size += info->tx_local.size; }

static struct xen_netif_tx_request *xennet_make_first_txreq( - struct netfront_queue *queue, struct sk_buff *skb, - struct page *page, unsigned int offset, unsigned int len) + struct xennet_gnttab_make_txreq *info, + unsigned int offset, unsigned int len) { - struct xennet_gnttab_make_txreq info = { - .queue = queue, - .skb = skb, - .page = page, - .size = 0, - }; + info->size = 0;

- gnttab_for_one_grant(page, offset, len, xennet_tx_setup_grant, &info); + gnttab_for_one_grant(info->page, offset, len, xennet_tx_setup_grant, info);

- return info.tx; + return info->tx; }

static void xennet_make_one_txreq(unsigned long gfn, unsigned int offset, @@ -488,35 +486,27 @@ static void xennet_make_one_txreq(unsign xennet_tx_setup_grant(gfn, offset, len, data); }

-static struct xen_netif_tx_request *xennet_make_txreqs( - struct netfront_queue *queue, struct xen_netif_tx_request *tx, - struct sk_buff *skb, struct page *page, +static void xennet_make_txreqs( + struct xennet_gnttab_make_txreq *info, + struct page *page, unsigned int offset, unsigned int len) { - struct xennet_gnttab_make_txreq info = { - .queue = queue, - .skb = skb, - .tx = tx, - }; - /* Skip unused frames from start of page */ page += offset >> PAGE_SHIFT; offset &= ~PAGE_MASK;

while (len) { - info.page = page; - info.size = 0; + info->page = page; + info->size = 0;

gnttab_foreach_grant_in_range(page, offset, len, xennet_make_one_txreq, - &info); + info);

page++; offset = 0; - len -= info.size; + len -= info->size; } - - return info.tx; }

/* @@ -569,7 +559,7 @@ static int xennet_start_xmit(struct sk_b { struct netfront_info *np = netdev_priv(dev); struct netfront_stats *tx_stats = this_cpu_ptr(np->tx_stats); - struct xen_netif_tx_request *tx, *first_tx; + struct xen_netif_tx_request *first_tx; unsigned int i; int notify; int slots; @@ -578,6 +568,7 @@ static int xennet_start_xmit(struct sk_b unsigned int len; unsigned long flags; struct netfront_queue *queue = NULL; + struct xennet_gnttab_make_txreq info = { }; unsigned int num_queues = dev->real_num_tx_queues; u16 queue_index; struct sk_buff *nskb; @@ -635,21 +626,24 @@ static int xennet_start_xmit(struct sk_b }

/* First request for the linear area. */ - first_tx = tx = xennet_make_first_txreq(queue, skb, - page, offset, len); - offset += tx->size; + info.queue = queue; + info.skb = skb; + info.page = page; + first_tx = xennet_make_first_txreq(&info, offset, len); + offset += info.tx_local.size; if (offset == PAGE_SIZE) { page++; offset = 0; } - len -= tx->size; + len -= info.tx_local.size;

if (skb->ip_summed == CHECKSUM_PARTIAL) /* local packet? */ - tx->flags |= XEN_NETTXF_csum_blank | XEN_NETTXF_data_validated; + first_tx->flags |= XEN_NETTXF_csum_blank | + XEN_NETTXF_data_validated; else if (skb->ip_summed == CHECKSUM_UNNECESSARY) /* remote but checksummed. */ - tx->flags |= XEN_NETTXF_data_validated; + first_tx->flags |= XEN_NETTXF_data_validated;

/* Optional extra info after the first request. */ if (skb_shinfo(skb)->gso_size) { @@ -658,7 +652,7 @@ static int xennet_start_xmit(struct sk_b gso = (struct xen_netif_extra_info *) RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++);

- tx->flags |= XEN_NETTXF_extra_info; + first_tx->flags |= XEN_NETTXF_extra_info;

gso->u.gso.size = skb_shinfo(skb)->gso_size; gso->u.gso.type = (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) ? @@ -672,13 +666,13 @@ static int xennet_start_xmit(struct sk_b }

/* Requests for the rest of the linear area. */ - tx = xennet_make_txreqs(queue, tx, skb, page, offset, len); + xennet_make_txreqs(&info, page, offset, len);

/* Requests for all the frags. */ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - tx = xennet_make_txreqs(queue, tx, skb, - skb_frag_page(frag), frag->page_offset, + xennet_make_txreqs(&info, skb_frag_page(frag), + frag->page_offset, skb_frag_size(frag)); }

From: Juergen Gross jgross@suse.com

commit a884daa61a7d91650987e855464526aef219590f upstream.

Today netfront will trust the backend to send only sane response data. In order to avoid privilege escalations or crashes in case of malicious backends verify the data to be within expected limits. Especially make sure that the response always references an outstanding request.

Note that only the tx queue needs special id handling, as for the rx queue the id is equal to the index in the ring page.

Introduce a new indicator for the device whether it is broken and let the device stop working when it is set. Set this indicator in case the backend sets any weird data.

Signed-off-by: Juergen Gross jgross@suse.com Reviewed-by: Jan Beulich jbeulich@suse.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/xen-netfront.c | 80 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 5 deletions(-)

--- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -125,10 +125,12 @@ struct netfront_queue { struct sk_buff *tx_skbs[NET_TX_RING_SIZE]; unsigned short tx_link[NET_TX_RING_SIZE]; #define TX_LINK_NONE 0xffff +#define TX_PENDING 0xfffe grant_ref_t gref_tx_head; grant_ref_t grant_tx_ref[NET_TX_RING_SIZE]; struct page *grant_tx_page[NET_TX_RING_SIZE]; unsigned tx_skb_freelist; + unsigned int tx_pend_queue;

spinlock_t rx_lock ____cacheline_aligned_in_smp; struct xen_netif_rx_front_ring rx; @@ -154,6 +156,9 @@ struct netfront_info { struct netfront_stats __percpu *rx_stats; struct netfront_stats __percpu *tx_stats;

+ /* Is device behaving sane? */ + bool broken; + atomic_t rx_gso_checksum_fixup; };

@@ -338,7 +343,7 @@ static int xennet_open(struct net_device unsigned int i = 0; struct netfront_queue *queue = NULL;

- if (!np->queues) + if (!np->queues || np->broken) return -ENODEV;

for (i = 0; i < num_queues; ++i) { @@ -366,11 +371,17 @@ static void xennet_tx_buf_gc(struct netf unsigned short id; struct sk_buff *skb; bool more_to_do; + const struct device *dev = &queue->info->netdev->dev;

BUG_ON(!netif_carrier_ok(queue->info->netdev));

do { prod = queue->tx.sring->rsp_prod; + if (RING_RESPONSE_PROD_OVERFLOW(&queue->tx, prod)) { + dev_alert(dev, "Illegal number of responses %u\n", + prod - queue->tx.rsp_cons); + goto err; + } rmb(); /* Ensure we see responses up to 'rp'. */

for (cons = queue->tx.rsp_cons; cons != prod; cons++) { @@ -380,14 +391,27 @@ static void xennet_tx_buf_gc(struct netf if (txrsp.status == XEN_NETIF_RSP_NULL) continue;

- id = txrsp.id; + id = txrsp.id; + if (id >= RING_SIZE(&queue->tx)) { + dev_alert(dev, + "Response has incorrect id (%u)\n", + id); + goto err; + } + if (queue->tx_link[id] != TX_PENDING) { + dev_alert(dev, + "Response for inactive request\n"); + goto err; + } + + queue->tx_link[id] = TX_LINK_NONE; skb = queue->tx_skbs[id]; queue->tx_skbs[id] = NULL; if (unlikely(gnttab_query_foreign_access( queue->grant_tx_ref[id]) != 0)) { - pr_alert("%s: warning -- grant still in use by backend domain\n", - __func__); - BUG(); + dev_alert(dev, + "Grant still in use by backend domain\n"); + goto err; } gnttab_end_foreign_access_ref( queue->grant_tx_ref[id], GNTMAP_readonly); @@ -405,6 +429,12 @@ static void xennet_tx_buf_gc(struct netf } while (more_to_do);

xennet_maybe_wake_tx(queue); + + return; + + err: + queue->info->broken = true; + dev_alert(dev, "Disabled for further use\n"); }

struct xennet_gnttab_make_txreq { @@ -448,6 +478,12 @@ static void xennet_tx_setup_grant(unsign

*tx = info->tx_local;

+ /* + * Put the request in the pending queue, it will be set to be pending + * when the producer index is about to be raised. + */ + add_id_to_list(&queue->tx_pend_queue, queue->tx_link, id); + info->tx = tx; info->size += info->tx_local.size; } @@ -540,6 +576,15 @@ static u16 xennet_select_queue(struct ne return queue_idx; }

+static void xennet_mark_tx_pending(struct netfront_queue *queue) +{ + unsigned int i; + + while ((i = get_id_from_list(&queue->tx_pend_queue, queue->tx_link)) != + TX_LINK_NONE) + queue->tx_link[i] = TX_PENDING; +} + #define MAX_XEN_SKB_FRAGS (65536 / XEN_PAGE_SIZE + 1)

static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev) @@ -563,6 +608,8 @@ static int xennet_start_xmit(struct sk_b /* Drop the packet if no queues are set up */ if (num_queues < 1) goto drop; + if (unlikely(np->broken)) + goto drop; /* Determine which queue to transmit this SKB on */ queue_index = skb_get_queue_mapping(skb); queue = &np->queues[queue_index]; @@ -666,6 +713,8 @@ static int xennet_start_xmit(struct sk_b /* First request has the packet length. */ first_tx->size = skb->len;

+ xennet_mark_tx_pending(queue); + RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&queue->tx, notify); if (notify) notify_remote_via_irq(queue->tx_irq); @@ -990,6 +1039,13 @@ static int xennet_poll(struct napi_struc skb_queue_head_init(&tmpq);

rp = queue->rx.sring->rsp_prod; + if (RING_RESPONSE_PROD_OVERFLOW(&queue->rx, rp)) { + dev_alert(&dev->dev, "Illegal number of responses %u\n", + rp - queue->rx.rsp_cons); + queue->info->broken = true; + spin_unlock(&queue->rx_lock); + return 0; + } rmb(); /* Ensure we see queued responses up to 'rp'. */

i = queue->rx.rsp_cons; @@ -1230,6 +1286,9 @@ static irqreturn_t xennet_tx_interrupt(i struct netfront_queue *queue = dev_id; unsigned long flags;

+ if (queue->info->broken) + return IRQ_HANDLED; + spin_lock_irqsave(&queue->tx_lock, flags); xennet_tx_buf_gc(queue); spin_unlock_irqrestore(&queue->tx_lock, flags); @@ -1242,6 +1301,9 @@ static irqreturn_t xennet_rx_interrupt(i struct netfront_queue *queue = dev_id; struct net_device *dev = queue->info->netdev;

+ if (queue->info->broken) + return IRQ_HANDLED; + if (likely(netif_carrier_ok(dev) && RING_HAS_UNCONSUMED_RESPONSES(&queue->rx))) napi_schedule(&queue->napi); @@ -1263,6 +1325,10 @@ static void xennet_poll_controller(struc struct netfront_info *info = netdev_priv(dev); unsigned int num_queues = dev->real_num_tx_queues; unsigned int i; + + if (info->broken) + return; + for (i = 0; i < num_queues; ++i) xennet_interrupt(0, &info->queues[i]); } @@ -1633,6 +1699,7 @@ static int xennet_init_queue(struct netf

/* Initialise tx_skb_freelist as a free chain containing every entry. */ queue->tx_skb_freelist = 0; + queue->tx_pend_queue = TX_LINK_NONE; for (i = 0; i < NET_TX_RING_SIZE; i++) { queue->tx_link[i] = i + 1; queue->grant_tx_ref[i] = GRANT_INVALID_REF; @@ -1848,6 +1915,9 @@ static int talk_to_netback(struct xenbus if (info->queues) xennet_destroy_queues(info);

+ /* For the case of a reconnect reset the "broken" indicator. */ + info->broken = false; + err = xennet_create_queues(info, &num_queues); if (err < 0) { xenbus_dev_fatal(dev, err, "creating queues");

From: Alexander Mikhalitsyn alexander.mikhalitsyn@virtuozzo.com

commit 85b6d24646e4125c591639841169baa98a2da503 upstream.

Currently, the exit_shm() function not designed to work properly when task->sysvshm.shm_clist holds shm objects from different IPC namespaces.

This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it leads to use-after-free (reproducer exists).

This is an attempt to fix the problem by extending exit_shm mechanism to handle shm's destroy from several IPC ns'es.

To achieve that we do several things:

1. add a namespace (non-refcounted) pointer to the struct shmid_kernel

2. during new shm object creation (newseg()/shmget syscall) we initialize this pointer by current task IPC ns

3. exit_shm() fully reworked such that it traverses over all shp's in task->sysvshm.shm_clist and gets IPC namespace not from current task as it was before but from shp's object itself, then call shm_destroy(shp, ns).

Note: We need to be really careful here, because as it was said before (1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we using special helper get_ipc_ns_not_zero() which allows to get IPC ns refcounter only if IPC ns not in the "state of destruction".

Q/A

Q: Why can we access shp->ns memory using non-refcounted pointer? A: Because shp object lifetime is always shorther than IPC namespace lifetime, so, if we get shp object from the task->sysvshm.shm_clist while holding task_lock(task) nobody can steal our namespace.

Q: Does this patch change semantics of unshare/setns/clone syscalls? A: No. It's just fixes non-covered case when process may leave IPC namespace without getting task->sysvshm.shm_clist list cleaned up.

Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.... Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com Fixes: ab602f79915 ("shm: make exit_shm work proportional to task activity") Co-developed-by: Manfred Spraul manfred@colorfullife.com Signed-off-by: Manfred Spraul manfred@colorfullife.com Signed-off-by: Alexander Mikhalitsyn alexander.mikhalitsyn@virtuozzo.com Cc: "Eric W. Biederman" ebiederm@xmission.com Cc: Davidlohr Bueso dave@stgolabs.net Cc: Greg KH gregkh@linuxfoundation.org Cc: Andrei Vagin avagin@gmail.com Cc: Pavel Tikhomirov ptikhomirov@virtuozzo.com Cc: Vasily Averin vvs@virtuozzo.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/ipc_namespace.h | 15 +++ include/linux/sched.h | 2 include/linux/shm.h | 13 ++- ipc/shm.c | 176 +++++++++++++++++++++++++++++++----------- 4 files changed, 159 insertions(+), 47 deletions(-)

--- a/include/linux/ipc_namespace.h +++ b/include/linux/ipc_namespace.h @@ -122,6 +122,16 @@ static inline struct ipc_namespace *get_ return ns; }

+static inline struct ipc_namespace *get_ipc_ns_not_zero(struct ipc_namespace *ns) +{ + if (ns) { + if (atomic_inc_not_zero(&ns->count)) + return ns; + } + + return NULL; +} + extern void put_ipc_ns(struct ipc_namespace *ns); #else static inline struct ipc_namespace *copy_ipcs(unsigned long flags, @@ -137,6 +147,11 @@ static inline struct ipc_namespace *get_ { return ns; } + +static inline struct ipc_namespace *get_ipc_ns_not_zero(struct ipc_namespace *ns) +{ + return ns; +}

static inline void put_ipc_ns(struct ipc_namespace *ns) { --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -3106,7 +3106,7 @@ static inline int thread_group_empty(str * Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring * subscriptions and synchronises with wait4(). Also used in procfs. Also * pins the final release of task.io_context. Also protects ->cpuset and - * ->cgroup.subsys[]. And ->vfork_done. + * ->cgroup.subsys[]. And ->vfork_done. And ->sysvshm.shm_clist. * * Nests both inside and outside of read_lock(&tasklist_lock). * It must not be nested with write_lock_irq(&tasklist_lock), --- a/include/linux/shm.h +++ b/include/linux/shm.h @@ -19,9 +19,18 @@ struct shmid_kernel /* private to the ke pid_t shm_lprid; struct user_struct *mlock_user;

- /* The task created the shm object. NULL if the task is dead. */ + /* + * The task created the shm object, for + * task_lock(shp->shm_creator) + */ struct task_struct *shm_creator; - struct list_head shm_clist; /* list by creator */ + + /* + * List by creator. task_lock(->shm_creator) required for read/write. + * If list_empty(), then the creator is dead already. + */ + struct list_head shm_clist; + struct ipc_namespace *ns; };

/* shm_mode upper byte flags */ --- a/ipc/shm.c +++ b/ipc/shm.c @@ -90,6 +90,7 @@ static void do_shm_rmid(struct ipc_names { struct shmid_kernel *shp; shp = container_of(ipcp, struct shmid_kernel, shm_perm); + WARN_ON(ns != shp->ns);

if (shp->shm_nattch) { shp->shm_perm.mode |= SHM_DEST; @@ -180,10 +181,43 @@ static void shm_rcu_free(struct rcu_head ipc_rcu_free(head); }

-static inline void shm_rmid(struct ipc_namespace *ns, struct shmid_kernel *s) +/* + * It has to be called with shp locked. + * It must be called before ipc_rmid() + */ +static inline void shm_clist_rm(struct shmid_kernel *shp) +{ + struct task_struct *creator; + + /* ensure that shm_creator does not disappear */ + rcu_read_lock(); + + /* + * A concurrent exit_shm may do a list_del_init() as well. + * Just do nothing if exit_shm already did the work + */ + if (!list_empty(&shp->shm_clist)) { + /* + * shp->shm_creator is guaranteed to be valid *only* + * if shp->shm_clist is not empty. + */ + creator = shp->shm_creator; + + task_lock(creator); + /* + * list_del_init() is a nop if the entry was already removed + * from the list. + */ + list_del_init(&shp->shm_clist); + task_unlock(creator); + } + rcu_read_unlock(); +} + +static inline void shm_rmid(struct shmid_kernel *s) { - list_del(&s->shm_clist); - ipc_rmid(&shm_ids(ns), &s->shm_perm); + shm_clist_rm(s); + ipc_rmid(&shm_ids(s->ns), &s->shm_perm); }

@@ -238,7 +272,7 @@ static void shm_destroy(struct ipc_names shm_file = shp->shm_file; shp->shm_file = NULL; ns->shm_tot -= (shp->shm_segsz + PAGE_SIZE - 1) >> PAGE_SHIFT; - shm_rmid(ns, shp); + shm_rmid(shp); shm_unlock(shp); if (!is_file_hugepages(shm_file)) shmem_lock(shm_file, 0, shp->mlock_user); @@ -259,10 +293,10 @@ static void shm_destroy(struct ipc_names * * 2) sysctl kernel.shm_rmid_forced is set to 1. */ -static bool shm_may_destroy(struct ipc_namespace *ns, struct shmid_kernel *shp) +static bool shm_may_destroy(struct shmid_kernel *shp) { return (shp->shm_nattch == 0) && - (ns->shm_rmid_forced || + (shp->ns->shm_rmid_forced || (shp->shm_perm.mode & SHM_DEST)); }

@@ -293,7 +327,7 @@ static void shm_close(struct vm_area_str shp->shm_lprid = task_tgid_vnr(current); shp->shm_dtim = get_seconds(); shp->shm_nattch--; - if (shm_may_destroy(ns, shp)) + if (shm_may_destroy(shp)) shm_destroy(ns, shp); else shm_unlock(shp); @@ -314,10 +348,10 @@ static int shm_try_destroy_orphaned(int * * As shp->* are changed under rwsem, it's safe to skip shp locking. */ - if (shp->shm_creator != NULL) + if (!list_empty(&shp->shm_clist)) return 0;

- if (shm_may_destroy(ns, shp)) { + if (shm_may_destroy(shp)) { shm_lock_by_ptr(shp); shm_destroy(ns, shp); } @@ -335,48 +369,97 @@ void shm_destroy_orphaned(struct ipc_nam /* Locking assumes this will only be called with task == current */ void exit_shm(struct task_struct *task) { - struct ipc_namespace *ns = task->nsproxy->ipc_ns; - struct shmid_kernel *shp, *n; + for (;;) { + struct shmid_kernel *shp; + struct ipc_namespace *ns;

- if (list_empty(&task->sysvshm.shm_clist)) - return; + task_lock(task); + + if (list_empty(&task->sysvshm.shm_clist)) { + task_unlock(task); + break; + } + + shp = list_first_entry(&task->sysvshm.shm_clist, struct shmid_kernel, + shm_clist);

- /* - * If kernel.shm_rmid_forced is not set then only keep track of - * which shmids are orphaned, so that a later set of the sysctl - * can clean them up. - */ - if (!ns->shm_rmid_forced) { - down_read(&shm_ids(ns).rwsem); - list_for_each_entry(shp, &task->sysvshm.shm_clist, shm_clist) - shp->shm_creator = NULL; /* - * Only under read lock but we are only called on current - * so no entry on the list will be shared. + * 1) Get pointer to the ipc namespace. It is worth to say + * that this pointer is guaranteed to be valid because + * shp lifetime is always shorter than namespace lifetime + * in which shp lives. + * We taken task_lock it means that shp won't be freed. */ - list_del(&task->sysvshm.shm_clist); - up_read(&shm_ids(ns).rwsem); - return; - } + ns = shp->ns;

- /* - * Destroy all already created segments, that were not yet mapped, - * and mark any mapped as orphan to cover the sysctl toggling. - * Destroy is skipped if shm_may_destroy() returns false. - */ - down_write(&shm_ids(ns).rwsem); - list_for_each_entry_safe(shp, n, &task->sysvshm.shm_clist, shm_clist) { - shp->shm_creator = NULL; + /* + * 2) If kernel.shm_rmid_forced is not set then only keep track of + * which shmids are orphaned, so that a later set of the sysctl + * can clean them up. + */ + if (!ns->shm_rmid_forced) + goto unlink_continue;

- if (shm_may_destroy(ns, shp)) { - shm_lock_by_ptr(shp); - shm_destroy(ns, shp); + /* + * 3) get a reference to the namespace. + * The refcount could be already 0. If it is 0, then + * the shm objects will be free by free_ipc_work(). + */ + ns = get_ipc_ns_not_zero(ns); + if (!ns) { +unlink_continue: + list_del_init(&shp->shm_clist); + task_unlock(task); + continue; } - }

- /* Remove the list head from any segments still attached. */ - list_del(&task->sysvshm.shm_clist); - up_write(&shm_ids(ns).rwsem); + /* + * 4) get a reference to shp. + * This cannot fail: shm_clist_rm() is called before + * ipc_rmid(), thus the refcount cannot be 0. + */ + WARN_ON(!ipc_rcu_getref(&shp->shm_perm)); + + /* + * 5) unlink the shm segment from the list of segments + * created by current. + * This must be done last. After unlinking, + * only the refcounts obtained above prevent IPC_RMID + * from destroying the segment or the namespace. + */ + list_del_init(&shp->shm_clist); + + task_unlock(task); + + /* + * 6) we have all references + * Thus lock & if needed destroy shp. + */ + down_write(&shm_ids(ns).rwsem); + shm_lock_by_ptr(shp); + /* + * rcu_read_lock was implicitly taken in shm_lock_by_ptr, it's + * safe to call ipc_rcu_putref here + */ + ipc_rcu_putref(&shp->shm_perm, shm_rcu_free); + + if (ipc_valid_object(&shp->shm_perm)) { + if (shm_may_destroy(shp)) + shm_destroy(ns, shp); + else + shm_unlock(shp); + } else { + /* + * Someone else deleted the shp from namespace + * idr/kht while we have waited. + * Just unlock and continue. + */ + shm_unlock(shp); + } + + up_write(&shm_ids(ns).rwsem); + put_ipc_ns(ns); /* paired with get_ipc_ns_not_zero */ + } }

static int shm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) @@ -621,7 +704,11 @@ static int newseg(struct ipc_namespace * goto no_id; }

+ shp->ns = ns; + + task_lock(current); list_add(&shp->shm_clist, &current->sysvshm.shm_clist); + task_unlock(current);

/* * shmid gets reported as "inode#" in /proc/pid/maps. @@ -1270,7 +1357,8 @@ out_nattch: down_write(&shm_ids(ns).rwsem); shp = shm_lock(ns, shmid); shp->shm_nattch--; - if (shm_may_destroy(ns, shp)) + + if (shm_may_destroy(shp)) shm_destroy(ns, shp); else shm_unlock(shp);

From: Mike Kravetz mike.kravetz@oracle.com

commit dff11abe280b47c21b804a8ace318e0638bb9a49 upstream.

When fixing an issue with PMD sharing and migration, it was discovered via code inspection that other callers of huge_pmd_unshare potentially have an issue with cache and tlb flushing.

Use the routine adjust_range_if_pmd_sharing_possible() to calculate worst case ranges for mmu notifiers. Ensure that this range is flushed if huge_pmd_unshare succeeds and unmaps a PUD_SUZE area.

Link: http://lkml.kernel.org/r/20180823205917.16297-3-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz mike.kravetz@oracle.com Acked-by: Kirill A. Shutemov kirill.shutemov@linux.intel.com Reviewed-by: Naoya Horiguchi n-horiguchi@ah.jp.nec.com Cc: Vlastimil Babka vbabka@suse.cz Cc: Davidlohr Bueso dave@stgolabs.net Cc: Michal Hocko mhocko@kernel.org Cc: Jerome Glisse jglisse@redhat.com Cc: Mike Kravetz mike.kravetz@oracle.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/hugetlb.c | 53 +++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 43 insertions(+), 10 deletions(-)

--- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -3393,8 +3393,8 @@ void __unmap_hugepage_range(struct mmu_g struct page *page; struct hstate *h = hstate_vma(vma); unsigned long sz = huge_page_size(h); - const unsigned long mmun_start = start; /* For mmu_notifiers */ - const unsigned long mmun_end = end; /* For mmu_notifiers */ + unsigned long mmun_start = start; /* For mmu_notifiers */ + unsigned long mmun_end = end; /* For mmu_notifiers */ bool force_flush = false;

WARN_ON(!is_vm_hugetlb_page(vma)); @@ -3402,6 +3402,11 @@ void __unmap_hugepage_range(struct mmu_g BUG_ON(end & ~huge_page_mask(h));

tlb_start_vma(tlb, vma); + + /* + * If sharing possible, alert mmu notifiers of worst case. + */ + adjust_range_if_pmd_sharing_possible(vma, &mmun_start, &mmun_end); mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end); address = start; for (; address < end; address += sz) { @@ -3512,12 +3517,23 @@ void unmap_hugepage_range(struct vm_area { struct mm_struct *mm; struct mmu_gather tlb; + unsigned long tlb_start = start; + unsigned long tlb_end = end; + + /* + * If shared PMDs were possibly used within this vma range, adjust + * start/end for worst case tlb flushing. + * Note that we can not be sure if PMDs are shared until we try to + * unmap pages. However, we want to make sure TLB flushing covers + * the largest possible range. + */ + adjust_range_if_pmd_sharing_possible(vma, &tlb_start, &tlb_end);

mm = vma->vm_mm;

- tlb_gather_mmu(&tlb, mm, start, end); + tlb_gather_mmu(&tlb, mm, tlb_start, tlb_end); __unmap_hugepage_range(&tlb, vma, start, end, ref_page); - tlb_finish_mmu(&tlb, start, end); + tlb_finish_mmu(&tlb, tlb_start, tlb_end); }

/* @@ -4205,11 +4221,21 @@ unsigned long hugetlb_change_protection( pte_t pte; struct hstate *h = hstate_vma(vma); unsigned long pages = 0; + unsigned long f_start = start; + unsigned long f_end = end; + bool shared_pmd = false; + + /* + * In the case of shared PMDs, the area to flush could be beyond + * start/end. Set f_start/f_end to cover the maximum possible + * range if PMD sharing is possible. + */ + adjust_range_if_pmd_sharing_possible(vma, &f_start, &f_end);

BUG_ON(address >= end); - flush_cache_range(vma, address, end); + flush_cache_range(vma, f_start, f_end);

- mmu_notifier_invalidate_range_start(mm, start, end); + mmu_notifier_invalidate_range_start(mm, f_start, f_end); i_mmap_lock_write(vma->vm_file->f_mapping); for (; address < end; address += huge_page_size(h)) { spinlock_t *ptl; @@ -4220,6 +4246,7 @@ unsigned long hugetlb_change_protection( if (huge_pmd_unshare(mm, &address, ptep)) { pages++; spin_unlock(ptl); + shared_pmd = true; continue; } pte = huge_ptep_get(ptep); @@ -4254,12 +4281,18 @@ unsigned long hugetlb_change_protection( * Must flush TLB before releasing i_mmap_rwsem: x86's huge_pmd_unshare * may have cleared our pud entry and done put_page on the page table: * once we release i_mmap_rwsem, another task can do the final put_page - * and that page table be reused and filled with junk. + * and that page table be reused and filled with junk. If we actually + * did unshare a page of pmds, flush the range corresponding to the pud. */ - flush_hugetlb_tlb_range(vma, start, end); - mmu_notifier_invalidate_range(mm, start, end); + if (shared_pmd) { + flush_hugetlb_tlb_range(vma, f_start, f_end); + mmu_notifier_invalidate_range(mm, f_start, f_end); + } else { + flush_hugetlb_tlb_range(vma, start, end); + mmu_notifier_invalidate_range(mm, start, end); + } i_mmap_unlock_write(vma->vm_file->f_mapping); - mmu_notifier_invalidate_range_end(mm, start, end); + mmu_notifier_invalidate_range_end(mm, f_start, f_end);

return pages << h->order; }

From: Slark Xiao slark_xiao@163.com

[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ]

When WWAN device wake from S3 deep, under thinkpad platform, WWAN would be disabled. This disable status could be checked by command 'nmcli r wwan' or 'rfkill list'.

Issue analysis as below: When host resume from S3 deep, thinkpad_acpi driver would call hotkey_resume() function. Finnaly, it will use wan_get_status to check the current status of WWAN device. During this resume progress, wan_get_status would always return off even WWAN boot up completely. In patch V2, Hans said 'sw_state should be unchanged after a suspend/resume. It's better to drop the tpacpi_rfk_update_swstate call all together from the resume path'. And it's confimed by Lenovo that GWAN is no longer available from WHL generation because the design does not match with current pin control.

Signed-off-by: Slark Xiao slark_xiao@163.com Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 12 ------------ 1 file changed, 12 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 9c929b5ce58e2..b19a51d12651d 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1169,15 +1169,6 @@ static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk) return status; }

-/* Query FW and update rfkill sw state for all rfkill switches */ -static void tpacpi_rfk_update_swstate_all(void) -{ - unsigned int i; - - for (i = 0; i < TPACPI_RFK_SW_MAX; i++) - tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]); -} - /* * Sync the HW-blocking state of all rfkill switches, * do notice it causes the rfkill core to schedule uevents @@ -3029,9 +3020,6 @@ static void tpacpi_send_radiosw_update(void) if (wlsw == TPACPI_RFK_RADIO_OFF) tpacpi_rfk_update_hwblock_state(true);

- /* Sync sw blocking state */ - tpacpi_rfk_update_swstate_all(); - /* Sync hw blocking state last if it is hw-unblocked */ if (wlsw == TPACPI_RFK_RADIO_ON) tpacpi_rfk_update_hwblock_state(false);

From: Manaf Meethalavalappu Pallikunhi manafm@codeaurora.org

[ Upstream commit 99b63316c39988039965693f5f43d8b4ccb1c86c ]

During the suspend is in process, thermal_zone_device_update bails out thermal zone re-evaluation for any sensor trip violation without setting next valid trip to that sensor. It assumes during resume it will re-evaluate same thermal zone and update trip. But when it is in suspend temperature goes down and on resume path while updating thermal zone if temperature is less than previously violated trip, thermal zone set trip function evaluates the same previous high and previous low trip as new high and low trip. Since there is no change in high/low trip, it bails out from thermal zone set trip API without setting any trip. It leads to a case where sensor high trip or low trip is disabled forever even though thermal zone has a valid high or low trip.

During thermal zone device init, reset thermal zone previous high and low trip. It resolves above mentioned scenario.

Signed-off-by: Manaf Meethalavalappu Pallikunhi manafm@codeaurora.org Reviewed-by: Thara Gopinath thara.gopinath@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/thermal_core.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 4c2dc3a59eb59..5ef30ba3b73a4 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -601,6 +601,8 @@ static void thermal_zone_device_init(struct thermal_zone_device *tz) { struct thermal_instance *pos; tz->temperature = THERMAL_TEMP_INVALID; + tz->prev_low_trip = -INT_MAX; + tz->prev_high_trip = INT_MAX; list_for_each_entry(pos, &tz->thermal_instances, tz_node) pos->initialized = false; }

From: Teng Qi starmiku1207184332@gmail.com

[ Upstream commit a66998e0fbf213d47d02813b9679426129d0d114 ]

The if statement: if (port >= DSAF_GE_NUM) return;

limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;

because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6).

To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns.

Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Teng Qi starmiku1207184332@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c index 67accce1d33d0..e89a62c6f2301 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c @@ -312,6 +312,10 @@ static void hns_dsaf_ge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, return;

if (!HNS_DSAF_IS_DEBUG(dsaf_dev)) { + /* DSAF_MAX_PORT_NUM is 6, but DSAF_GE_NUM is 8. + We need check to prevent array overflow */ + if (port >= DSAF_MAX_PORT_NUM) + return; reg_val_1 = 0x1 << port; port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; /* there is difference between V1 and V2 in register.*/

From: Teng Qi starmiku1207184332@gmail.com

[ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ]

The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008)

and the if statement if (MOTO_SROM_BUG) lp->active = 0;

using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p;

However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).

Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Teng Qi starmiku1207184332@gmail.com Reviewed-by: Arnd Bergmann arnd@arndb.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/dec/tulip/de4x5.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c index b39e8315e4e27..a5a291b848b06 100644 --- a/drivers/net/ethernet/dec/tulip/de4x5.c +++ b/drivers/net/ethernet/dec/tulip/de4x5.c @@ -4704,6 +4704,10 @@ type3_infoblock(struct net_device *dev, u_char count, u_char *p) lp->ibn = 3; lp->active = *p++; if (MOTO_SROM_BUG) lp->active = 0; + /* if (MOTO_SROM_BUG) statement indicates lp->active could + * be 8 (i.e. the size of array lp->phy) */ + if (WARN_ON(lp->active >= ARRAY_SIZE(lp->phy))) + return -EINVAL; lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;

From: Masami Hiramatsu mhiramat@kernel.org

commit 6bbfa44116689469267f1a6e3d233b52114139d2 upstream.

The 'kprobe::data_size' is unsigned, thus it can not be negative. But if user sets it enough big number (e.g. (size_t)-8), the result of 'data_size + sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct kretprobe_instance) or zero. In result, the kretprobe_instance are allocated without enough memory, and kretprobe accesses outside of allocated memory.

To avoid this issue, introduce a max limitation of the kretprobe::data_size. 4KB per instance should be OK.

Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@dev...

Cc: stable@vger.kernel.org Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler") Reported-by: zhangyue zhangyue1@kylinos.cn Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/kprobes.h | 2 ++ kernel/kprobes.c | 3 +++ 2 files changed, 5 insertions(+)

--- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -192,6 +192,8 @@ struct kretprobe { raw_spinlock_t lock; };

+#define KRETPROBE_MAX_DATA_SIZE 4096 + struct kretprobe_instance { struct hlist_node hlist; struct kretprobe *rp; --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1899,6 +1899,9 @@ int register_kretprobe(struct kretprobe } }

+ if (rp->data_size > KRETPROBE_MAX_DATA_SIZE) + return -E2BIG; + rp->kp.pre_handler = pre_handler_kretprobe; rp->kp.post_handler = NULL; rp->kp.fault_handler = NULL;

From: Baokun Li libaokun1@huawei.com

commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream.

Trying to remove the fsl-sata module in the PPC64 GNU/Linux leads to the following warning: ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/69', leaking at least 'fsl-sata[ff0221000.sata]' WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722 .remove_proc_entry+0x20c/0x220 IRQMASK: 0 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220 LR [c000000000338268] .remove_proc_entry+0x208/0x220 Call Trace: .remove_proc_entry+0x208/0x220 (unreliable) .unregister_irq_proc+0x104/0x140 .free_desc+0x44/0xb0 .irq_free_descs+0x9c/0xf0 .irq_dispose_mapping+0x64/0xa0 .sata_fsl_remove+0x58/0xa0 [sata_fsl] .platform_drv_remove+0x40/0x90 .device_release_driver_internal+0x160/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] ---[ end trace 0ea876d4076908f5 ]---

The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). Also we should adapt return value checking and propagate error values.

In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping.

Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Sergei Shtylyov sergei.shtylyov@gmail.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/sata_fsl.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1502,9 +1502,9 @@ static int sata_fsl_probe(struct platfor host_priv->ssr_base = ssr_base; host_priv->csr_base = csr_base;

- irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); - if (!irq) { - dev_err(&ofdev->dev, "invalid irq from platform\n"); + irq = platform_get_irq(ofdev, 0); + if (irq < 0) { + retval = irq; goto error_exit_with_cleanup; } host_priv->irq = irq; @@ -1581,8 +1581,6 @@ static int sata_fsl_remove(struct platfo

ata_host_detach(host);

- irq_dispose_mapping(host_priv->irq); - return 0; }

From: Linus Torvalds torvalds@linux-foundation.org

commit 054aa8d439b9185d4f5eb9a90282d1ce74772969 upstream.

Jann Horn points out that there is another possible race wrt Unix domain socket garbage collection, somewhat reminiscent of the one fixed in commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK").

See the extended comment about the garbage collection requirements added to unix_peek_fds() by that commit for details.

The race comes from how we can locklessly look up a file descriptor just as it is in the process of being closed, and with the right artificial timing (Jann added a few strategic 'mdelay(500)' calls to do that), the Unix domain socket garbage collector could see the reference count decrement of the close() happen before fget() took its reference to the file and the file was attached onto a new file descriptor.

This is all (intentionally) correct on the 'struct file *' side, with RCU lookups and lockless reference counting very much part of the design. Getting that reference count out of order isn't a problem per se.

But the garbage collector can get confused by seeing this situation of having seen a file not having any remaining external references and then seeing it being attached to an fd.

In commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK") the fix was to serialize the file descriptor install with the garbage collector by taking and releasing the unix_gc_lock.

That's not really an option here, but since this all happens when we are in the process of looking up a file descriptor, we can instead simply just re-check that the file hasn't been closed in the meantime, and just re-do the lookup if we raced with a concurrent close() of the same file descriptor.

Reported-and-tested-by: Jann Horn jannh@google.com Acked-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/file.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/fs/file.c +++ b/fs/file.c @@ -709,6 +709,10 @@ loop: file = NULL; else if (!get_file_rcu_many(file, refs)) goto loop; + else if (__fcheck_files(files, fd) != file) { + fput_many(file, refs); + goto loop; + } } rcu_read_unlock();

From: Zhou Qingyang zhou1615@umn.edu

commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream.

In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args().

Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling.

This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug.

Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code.

Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang zhou1615@umn.edu Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1078,8 +1078,14 @@ static int qlcnic_83xx_add_rings(struct sds_mbx_size = sizeof(struct qlcnic_sds_mbx); context_id = recv_ctx->context_id; num_sds = adapter->drv_sds_rings - QLCNIC_MAX_SDS_RINGS; - ahw->hw_ops->alloc_mbx_args(&cmd, adapter, - QLCNIC_CMD_ADD_RCV_RINGS); + err = ahw->hw_ops->alloc_mbx_args(&cmd, adapter, + QLCNIC_CMD_ADD_RCV_RINGS); + if (err) { + dev_err(&adapter->pdev->dev, + "Failed to alloc mbx args %d\n", err); + return err; + } + cmd.req.arg[1] = 0 | (num_sds << 8) | (context_id << 16);

/* set up status rings, mbx 2-81 */

From: William Kucharski william.kucharski@oracle.com

commit 19f36edf14bcdb783aef3af8217df96f76a8ce34 upstream.

Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched.

Fixes: c6a58ffed536 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket") Signed-off-by: William Kucharski william.kucharski@oracle.com Acked-by: Santosh Shilimkar santosh.shilimkar@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/rds/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/rds/tcp.c +++ b/net/rds/tcp.c @@ -389,7 +389,7 @@ void rds_tcp_tune(struct socket *sock) sk->sk_userlocks |= SOCK_SNDBUF_LOCK; } if (rtn->rcvbuf_size > 0) { - sk->sk_sndbuf = rtn->rcvbuf_size; + sk->sk_rcvbuf = rtn->rcvbuf_size; sk->sk_userlocks |= SOCK_RCVBUF_LOCK; } release_sock(sk);

From: Maciej W. Rozycki macro@orcam.me.uk

commit 3dfac26e2ef29ff2abc2a75aa4cd48fce25a2c4b upstream.

Fix a division by zero in `vgacon_resize' with a backtrace like:

vgacon_resize vc_do_resize vgacon_init do_bind_con_driver do_unbind_con_driver fbcon_fb_unbind do_unregister_framebuffer do_register_framebuffer register_framebuffer __drm_fb_helper_initial_config_and_unlock drm_helper_hpd_irq_event dw_hdmi_irq irq_thread kthread

caused by `c->vc_cell_height' not having been initialized. This has only started to trigger with commit 860dafa90259 ("vt: Fix character height handling with VT_RESIZEX"), however the ultimate offender is commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console").

Said commit has added a call to `vc_resize' whenever `vgacon_init' is called with the `init' argument set to 0, which did not happen before. And the call is made before a key vgacon boot parameter retrieved in `vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to use to the console structure being worked on. Previously the parameter was `c->vc_font.height' and now it is `c->vc_cell_height'.

In this particular scenario the registration of fbcon has failed and vt resorts to vgacon. Now fbcon does have initialized `c->vc_font.height' somehow, unlike `c->vc_cell_height', which is why this code did not crash before, but either way the boot parameters should have been copied to the console structure ahead of the call to `vc_resize' rather than afterwards, so that first the call has a chance to use them and second they do not change the console structure to something possibly different from what was used by `vc_resize'.

Move the propagation of the vgacon boot parameters ahead of the call to `vc_resize' then. Adjust the comment accordingly.

Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console") Cc: stable@vger.kernel.org # v2.6.18+ Reported-by: Wim Osterholt wim@djo.tudelft.nl Reported-by: Pavel V. Panteleev panteleev_p@mcst.ru Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/video/console/vgacon.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -420,11 +420,17 @@ static void vgacon_init(struct vc_data * struct uni_pagedir *p;

/* - * We cannot be loaded as a module, therefore init is always 1, - * but vgacon_init can be called more than once, and init will - * not be 1. + * We cannot be loaded as a module, therefore init will be 1 + * if we are the default console, however if we are a fallback + * console, for example if fbcon has failed registration, then + * init will be 0, so we need to make sure our boot parameters + * have been copied to the console structure for vgacon_resize + * ultimately called by vc_resize. Any subsequent calls to + * vgacon_init init will have init set to 0 too. */ c->vc_can_do_color = vga_can_do_color; + c->vc_scan_lines = vga_scan_lines; + c->vc_font.height = c->vc_cell_height = vga_video_font_height;

/* set dimensions manually if init != 0 since vc_resize() will fail */ if (init) { @@ -433,8 +439,6 @@ static void vgacon_init(struct vc_data * } else vc_resize(c, vga_video_num_columns, vga_video_num_lines);

- c->vc_scan_lines = vga_scan_lines; - c->vc_font.height = c->vc_cell_height = vga_video_font_height; c->vc_complement_mask = 0x7700; if (vga_512_chars) c->vc_hi_font_mask = 0x0800;

From: Pierre Gondois Pierre.Gondois@arm.com

commit ac442a077acf9a6bf1db4320ec0c3f303be092b3 upstream.

The document 'ACPI for Arm Components 1.0' defines the following _HID mappings: -'Prime cell UART (PL011)': ARMH0011 -'SBSA UART': ARMHB000

Use the sbsa-uart driver when a device is described with the 'ARMHB000' _HID.

Note: PL011 devices currently use the sbsa-uart driver instead of the uart-pl011 driver. Indeed, PL011 devices are not bound to a clock in ACPI. It is not possible to change their baudrate.

Cc: stable@vger.kernel.org Signed-off-by: Pierre Gondois Pierre.Gondois@arm.com Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/amba-pl011.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2702,6 +2702,7 @@ MODULE_DEVICE_TABLE(of, sbsa_uart_of_mat

static const struct acpi_device_id sbsa_uart_acpi_match[] = { { "ARMH0011", 0 }, + { "ARMHB000", 0 }, {}, }; MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);