From: Takahiro Kuwano Takahiro.Kuwano@infineon.com

CFR2V[7] is assigned to Flash's address mode (3- or 4-ybte) and must not be changed when writing MEMLAT (CFR2V[3:0]). CFR2V shall be used in a read, update, write back fashion.

Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash") Signed-off-by: Takahiro Kuwano Takahiro.Kuwano@infineon.com Cc: stable@vger.kernel.org --- drivers/mtd/spi-nor/spansion.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c index f40d4ede4093..8515f7e56715 100644 --- a/drivers/mtd/spi-nor/spansion.c +++ b/drivers/mtd/spi-nor/spansion.c @@ -4,6 +4,7 @@ * Copyright (C) 2014, Freescale Semiconductor, Inc. */

+#include <linux/bitfield.h> #include <linux/device.h> #include <linux/mtd/spi-nor.h>

@@ -28,6 +29,7 @@ #define SPINOR_REG_CYPRESS_CFR2 0x3 #define SPINOR_REG_CYPRESS_CFR2V \ (SPINOR_REG_CYPRESS_VREG + SPINOR_REG_CYPRESS_CFR2) +#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK GENMASK(3, 0) #define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24 0xb #define SPINOR_REG_CYPRESS_CFR2_ADRBYT BIT(7) #define SPINOR_REG_CYPRESS_CFR3 0x4 @@ -161,8 +163,18 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor) int ret; u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;

+ op = (struct spi_mem_op) + CYPRESS_NOR_RD_ANY_REG_OP(addr_mode_nbytes, + SPINOR_REG_CYPRESS_CFR2V, 0, buf); + + ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto); + if (ret) + return ret; + /* Use 24 dummy cycles for memory array reads. */ - *buf = SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24; + *buf &= ~SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK; + *buf |= FIELD_PREP(SPINOR_REG_CYPRESS_CFR2_MEMLAT_MASK, + SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24); op = (struct spi_mem_op) CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes, SPINOR_REG_CYPRESS_CFR2V, 1, buf);