commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK is set for Tegra210 from the beginning of Tegra210 support in the driver.

Tegra210 SDMMC hardware by default uses timeout clock (TMCLK) instead of SDCLK and this quirk should not be set.

So, this patch remove this quirk for Tegra210.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Cc: stable stable@vger.kernel.org # 5.4 Tested-by: Jon Hunter jonathanh@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com Acked-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Sowjanya Komatineni skomatineni@nvidia.com --- drivers/mmc/host/sdhci-tegra.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 0a3f9d0..2be3511 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -1418,7 +1418,6 @@ static const struct sdhci_ops tegra210_sdhci_ops = {

static const struct sdhci_pltfm_data sdhci_tegra210_pdata = { .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | SDHCI_QUIRK_SINGLE_POWER_WRITE | SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data timeout.

So, this patch adds "tmclk" to Tegra sdhci clock property in the device tree binding.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Cc: stable stable@vger.kernel.org # 5.4 Reviewed-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Sowjanya Komatineni skomatineni@nvidia.com --- .../bindings/mmc/nvidia,tegra20-sdhci.txt | 32 ++++++++++++++++++++-- 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index 2cf3aff..96c0b14 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -15,8 +15,15 @@ Required properties: - "nvidia,tegra210-sdhci": for Tegra210 - "nvidia,tegra186-sdhci": for Tegra186 - "nvidia,tegra194-sdhci": for Tegra194 -- clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. +- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries. + One for the module clock and one for the timeout clock. + For all other Tegra devices, must contain a single entry for + the module clock. See ../clocks/clock-bindings.txt for details. +- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the + strings 'sdhci' and 'tmclk' to represent the module and + the timeout clocks, respectively. + For all other Tegra devices must contain the string 'sdhci' + to represent the module clock. - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the following entries: @@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:

Example: sdhci@700b0000 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; @@ -115,3 +122,22 @@ sdhci@700b0000 { nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; status = "disabled"; }; + +sdhci@700b0000 { + compatible = "nvidia,tegra210-sdhci"; + reg = <0x0 0x700b0000 0x0 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SDMMC1>, + <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>; + clock-names = "sdhci", "tmclk"; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; + nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; + status = "disabled"; +};

commit 39cb62cb8973 ("arm64: tegra: Add Tegra186 support")

Tegra186 uses separate SDMMC_LEGACY_TM clock for data timeout and this clock is not enabled currently which is not recommended.

Tegra186 SDMMC advertises 12Mhz as timeout clock frequency in host capability register and uses it by default.

So, this clock should be kept enabled by the SDMMC driver.

Fixes: 39cb62cb8973 ("arm64: tegra: Add Tegra186 support") Cc: stable stable@vger.kernel.org # 5.4 Tested-by: Jon Hunter jonathanh@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com Signed-off-by: Sowjanya Komatineni skomatineni@nvidia.com --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 34d249d..8eb61dd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -337,8 +337,9 @@ compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03400000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_SDMMC1>; - clock-names = "sdhci"; + clocks = <&bpmp TEGRA186_CLK_SDMMC1>, + <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>; + clock-names = "sdhci", "tmclk"; resets = <&bpmp TEGRA186_RESET_SDMMC1>; reset-names = "sdhci"; interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>, @@ -366,8 +367,9 @@ compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03420000 0x0 0x10000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_SDMMC2>; - clock-names = "sdhci"; + clocks = <&bpmp TEGRA186_CLK_SDMMC2>, + <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>; + clock-names = "sdhci", "tmclk"; resets = <&bpmp TEGRA186_RESET_SDMMC2>; reset-names = "sdhci"; interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>, @@ -390,8 +392,9 @@ compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03440000 0x0 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_SDMMC3>; - clock-names = "sdhci"; + clocks = <&bpmp TEGRA186_CLK_SDMMC3>, + <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>; + clock-names = "sdhci", "tmclk"; resets = <&bpmp TEGRA186_RESET_SDMMC3>; reset-names = "sdhci"; interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>, @@ -416,8 +419,9 @@ compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03460000 0x0 0x10000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_SDMMC4>; - clock-names = "sdhci"; + clocks = <&bpmp TEGRA186_CLK_SDMMC4>, + <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>; + clock-names = "sdhci", "tmclk"; assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>, <&bpmp TEGRA186_CLK_PLLC4_VCO>; assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;

commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra SDMMC hawdware for data timeout to achive better timeout than using SDCLK and using TMCLK is recommended.

USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or SDCLK for data timeout.

Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used for data timeout by Tegra SDMMC hardware and having TMCLK not enabled is not recommended.

So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate timeout clock and keeps TMCLK enabled all the time.

Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support") Cc: stable stable@vger.kernel.org # 5.4 Tested-by: Jon Hunter jonathanh@nvidia.com Reviewed-by: Jon Hunter jonathanh@nvidia.com Acked-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Sowjanya Komatineni skomatineni@nvidia.com --- drivers/mmc/host/sdhci-tegra.c | 53 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 31ed321..13fbf70 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -110,6 +110,12 @@ #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP BIT(8) #define NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING BIT(9)

+/* + * NVQUIRK_HAS_TMCLK is for SoC's having separate timeout clock for Tegra + * SDMMC hardware data timeout. + */ +#define NVQUIRK_HAS_TMCLK BIT(10) + /* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */ #define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000

@@ -140,6 +146,7 @@ struct sdhci_tegra_autocal_offsets { struct sdhci_tegra { const struct sdhci_tegra_soc_data *soc_data; struct gpio_desc *power_gpio; + struct clk *tmclk; bool ddr_signaling; bool pad_calib_required; bool pad_control_available; @@ -1433,7 +1440,8 @@ static const struct sdhci_tegra_soc_data soc_data_tegra210 = { NVQUIRK_HAS_PADCALIB | NVQUIRK_DIS_CARD_CLK_CONFIG_TAP | NVQUIRK_ENABLE_SDR50 | - NVQUIRK_ENABLE_SDR104, + NVQUIRK_ENABLE_SDR104 | + NVQUIRK_HAS_TMCLK, .min_tap_delay = 106, .max_tap_delay = 185, }; @@ -1471,6 +1479,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra186 = { NVQUIRK_DIS_CARD_CLK_CONFIG_TAP | NVQUIRK_ENABLE_SDR50 | NVQUIRK_ENABLE_SDR104 | + NVQUIRK_HAS_TMCLK | NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING, .min_tap_delay = 84, .max_tap_delay = 136, @@ -1483,7 +1492,8 @@ static const struct sdhci_tegra_soc_data soc_data_tegra194 = { NVQUIRK_HAS_PADCALIB | NVQUIRK_DIS_CARD_CLK_CONFIG_TAP | NVQUIRK_ENABLE_SDR50 | - NVQUIRK_ENABLE_SDR104, + NVQUIRK_ENABLE_SDR104 | + NVQUIRK_HAS_TMCLK, .min_tap_delay = 96, .max_tap_delay = 139, }; @@ -1611,6 +1621,43 @@ static int sdhci_tegra_probe(struct platform_device *pdev) goto err_power_req; }

+ /* + * Tegra210 has a separate SDMMC_LEGACY_TM clock used for host + * timeout clock and SW can choose TMCLK or SDCLK for hardware + * data timeout through the bit USE_TMCLK_FOR_DATA_TIMEOUT of + * the register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL. + * + * USE_TMCLK_FOR_DATA_TIMEOUT bit default is set to 1 and SDMMC uses + * 12Mhz TMCLK which is advertised in host capability register. + * With TMCLK of 12Mhz provides maximum data timeout period that can + * be achieved is 11s better than using SDCLK for data timeout. + * + * So, TMCLK is set to 12Mhz and kept enabled all the time on SoC's + * supporting separate TMCLK. + */ + + if (soc_data->nvquirks & NVQUIRK_HAS_TMCLK) { + clk = devm_clk_get(&pdev->dev, "tmclk"); + if (IS_ERR(clk)) { + rc = PTR_ERR(clk); + if (rc == -EPROBE_DEFER) + goto err_power_req; + + dev_warn(&pdev->dev, "failed to get tmclk: %d\n", rc); + clk = NULL; + } + + clk_set_rate(clk, 12000000); + rc = clk_prepare_enable(clk); + if (rc) { + dev_err(&pdev->dev, + "failed to enable tmclk: %d\n", rc); + goto err_power_req; + } + + tegra_host->tmclk = clk; + } + clk = devm_clk_get(mmc_dev(host->mmc), NULL); if (IS_ERR(clk)) { rc = PTR_ERR(clk); @@ -1654,6 +1701,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev) err_rst_get: clk_disable_unprepare(pltfm_host->clk); err_clk_get: + clk_disable_unprepare(tegra_host->tmclk); err_power_req: err_parse_dt: sdhci_pltfm_free(pdev); @@ -1671,6 +1719,7 @@ static int sdhci_tegra_remove(struct platform_device *pdev) reset_control_assert(tegra_host->rst); usleep_range(2000, 4000); clk_disable_unprepare(pltfm_host->clk); + clk_disable_unprepare(tegra_host->tmclk);

sdhci_pltfm_free(pdev);