On Sat, 2018-03-24 at 17:57 +0100, gregkh@linuxfoundation.org wrote:

The patch below does not apply to the 4.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

Hi Greg,

Unless I missed something, the change which introduced the issue is not part of the 4.15 stable history which is why the fix does not apply and is not needed.

Regards Jerome

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 7f95beea36089918335eb1810ddd7ba8cf9d09cc Mon Sep 17 00:00:00 2001 From: Shawn Lin shawn.lin@rock-chips.com Date: Thu, 8 Mar 2018 14:49:41 +0800 Subject: [PATCH] clk: update cached phase to respect the fact when setting phase

It's found that the final phase set by driver doesn't match that of the output from clk_summary:

dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 346 mmc0: new ultra high speed SDR104 SDIO card at address 0001

cat /sys/kernel/debug/clk/clk_summary | grep sdio_sample sdio_sample 0 1 0 50000000 0 0

It seems the cached core->phase isn't updated after the clk was registered. So fix this issue by updating the core->phase if setting phase successfully.

Fixes: 9e4d04adeb1a ("clk: add clk_core_set_phase_nolock function") Cc: Stable stable@vger.kernel.org Cc: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Shawn Lin shawn.lin@rock-chips.com Reviewed-by: Jerome Brunet jbrunet@baylibre.com Tested-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Michael Turquette mturquette@baylibre.com

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 0f686a9dac3e..617e56268b18 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -2309,8 +2309,11 @@ static int clk_core_set_phase_nolock(struct clk_core *core, int degrees) trace_clk_set_phase(core, degrees);

• if (core->ops->set_phase)

• if (core->ops->set_phase) { ret = core->ops->set_phase(core->hw, degrees);

• if (!ret)
  

• 	core->phase = degrees;
  

• }

trace_clk_set_phase_complete(core, degrees);