From: Trevor Wu trevor.wu@mediatek.com
[ Upstream commit d601bb78f06b9e3cbb52e6b87b88add9920a11b6 ]
To avoid power leakage, it is recommended to replace the default pinctrl state with dynamic pinctrl since certain audio pinmux functions can remain in a HIGH state even when audio is disabled. Linking pinctrl with DAPM using SND_SOC_DAPM_PINCTRL will ensure that audio pins remain in GPIO mode by default and only switch to an audio function when necessary.
Signed-off-by: Trevor Wu trevor.wu@mediatek.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Link: https://lore.kernel.org/r/20230825024935.10878-2-trevor.wu@mediatek.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/mediatek/mt8188/mt8188-mt6359.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/sound/soc/mediatek/mt8188/mt8188-mt6359.c b/sound/soc/mediatek/mt8188/mt8188-mt6359.c index 9017f48b6272b..f7e22abb75846 100644 --- a/sound/soc/mediatek/mt8188/mt8188-mt6359.c +++ b/sound/soc/mediatek/mt8188/mt8188-mt6359.c @@ -246,6 +246,11 @@ static const struct snd_soc_dapm_widget mt8188_mt6359_widgets[] = { SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_SINK("HDMI"), SND_SOC_DAPM_SINK("DP"), + + /* dynamic pinctrl */ + SND_SOC_DAPM_PINCTRL("ETDM_SPK_PIN", "aud_etdm_spk_on", "aud_etdm_spk_off"), + SND_SOC_DAPM_PINCTRL("ETDM_HP_PIN", "aud_etdm_hp_on", "aud_etdm_hp_off"), + SND_SOC_DAPM_PINCTRL("MTKAIF_PIN", "aud_mtkaif_on", "aud_mtkaif_off"), };
static const struct snd_kcontrol_new mt8188_mt6359_controls[] = { @@ -267,6 +272,7 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME); struct snd_soc_component *cmpnt_codec = asoc_rtd_to_codec(rtd, 0)->component; + struct snd_soc_dapm_widget *pin_w = NULL, *w; struct mtk_base_afe *afe; struct mt8188_afe_private *afe_priv; struct mtkaif_param *param; @@ -306,6 +312,18 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) return 0; }
+ for_each_card_widgets(rtd->card, w) { + if (!strcmp(w->name, "MTKAIF_PIN")) { + pin_w = w; + break; + } + } + + if (pin_w) + dapm_pinctrl_event(pin_w, NULL, SND_SOC_DAPM_PRE_PMU); + else + dev_dbg(afe->dev, "%s(), no pinmux widget, please check if default on\n", __func__); + pm_runtime_get_sync(afe->dev); mt6359_mtkaif_calibration_enable(cmpnt_codec);
@@ -403,6 +421,9 @@ static int mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd) for (i = 0; i < MT8188_MTKAIF_MISO_NUM; i++) param->mtkaif_phase_cycle[i] = mtkaif_phase_cycle[i];
+ if (pin_w) + dapm_pinctrl_event(pin_w, NULL, SND_SOC_DAPM_POST_PMD); + dev_dbg(afe->dev, "%s(), end, calibration ok %d\n", __func__, param->mtkaif_calibration_ok);
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 47f56e38a199bd45514b8e0142399cba4feeaf1a ]
Add members to struct snd_soc_card to store the PCI subsystem ID (SSID) of the soundcard.
The PCI specification provides two registers to store a vendor-specific SSID that can be read by drivers to uniquely identify a particular "soundcard". This is defined in the PCI specification to distinguish products that use the same silicon (and therefore have the same silicon ID) so that product-specific differences can be applied.
PCI only defines 0xFFFF as an invalid value. 0x0000 is not defined as invalid. So the usual pattern of zero-filling the struct and then assuming a zero value unset will not work. A flag is included to indicate when the SSID information has been filled in.
Unlike DMI information, which has a free-format entirely up to the vendor, the PCI SSID has a strictly defined format and a registry of vendor IDs.
It is usual in Windows drivers that the SSID is used as the sole identifier of the specific end-product and the Windows driver contains tables mapping that to information about the hardware setup, rather than using ACPI properties.
This SSID is important information for ASoC components that need to apply hardware-specific configuration on PCI-based systems.
As the SSID is a generic part of the PCI specification and is treated as identifying the "soundcard", it is reasonable to include this information in struct snd_soc_card, instead of components inventing their own custom ways to pass this information around.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230912163207.3498161-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/sound/soc-card.h | 37 +++++++++++++++++++++++++++++++++++++ include/sound/soc.h | 11 +++++++++++ 2 files changed, 48 insertions(+)
diff --git a/include/sound/soc-card.h b/include/sound/soc-card.h index fc94dfb0021fd..e8ff2e089cd00 100644 --- a/include/sound/soc-card.h +++ b/include/sound/soc-card.h @@ -59,6 +59,43 @@ int snd_soc_card_add_dai_link(struct snd_soc_card *card, void snd_soc_card_remove_dai_link(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link);
+#ifdef CONFIG_PCI +static inline void snd_soc_card_set_pci_ssid(struct snd_soc_card *card, + unsigned short vendor, + unsigned short device) +{ + card->pci_subsystem_vendor = vendor; + card->pci_subsystem_device = device; + card->pci_subsystem_set = true; +} + +static inline int snd_soc_card_get_pci_ssid(struct snd_soc_card *card, + unsigned short *vendor, + unsigned short *device) +{ + if (!card->pci_subsystem_set) + return -ENOENT; + + *vendor = card->pci_subsystem_vendor; + *device = card->pci_subsystem_device; + + return 0; +} +#else /* !CONFIG_PCI */ +static inline void snd_soc_card_set_pci_ssid(struct snd_soc_card *card, + unsigned short vendor, + unsigned short device) +{ +} + +static inline int snd_soc_card_get_pci_ssid(struct snd_soc_card *card, + unsigned short *vendor, + unsigned short *device) +{ + return -ENOENT; +} +#endif /* CONFIG_PCI */ + /* device driver data */ static inline void snd_soc_card_set_drvdata(struct snd_soc_card *card, void *data) diff --git a/include/sound/soc.h b/include/sound/soc.h index 37f9d3fe302a6..49ec688eed606 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -932,6 +932,17 @@ struct snd_soc_card { #ifdef CONFIG_DMI char dmi_longname[80]; #endif /* CONFIG_DMI */ + +#ifdef CONFIG_PCI + /* + * PCI does not define 0 as invalid, so pci_subsystem_set indicates + * whether a value has been written to these fields. + */ + unsigned short pci_subsystem_vendor; + unsigned short pci_subsystem_device; + bool pci_subsystem_set; +#endif /* CONFIG_PCI */ + char topology_shortname[32];
struct device *dev;
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit ba2de401d32625fe538d3f2c00ca73740dd2d516 ]
Pass the PCI SSID of the audio interface through to the machine driver. This allows the machine driver to use the SSID to uniquely identify the specific hardware configuration and apply any platform-specific configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then passes configuration information to the machine driver through struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID information has been added to both snd_sof_pdata and snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to indicate that the struct member was not written. Instead a flag is included to indicate that a value has been written to the subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It copies the SSID information across to the struct snd_soc_acpi_mach_params. This done before calling any custom set_mach_params() so that it could be used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its platform_data.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/sound/soc-acpi.h | 7 +++++++ include/sound/sof.h | 8 ++++++++ sound/soc/sof/sof-audio.c | 7 +++++++ sound/soc/sof/sof-pci-dev.c | 8 ++++++++ 4 files changed, 30 insertions(+)
diff --git a/include/sound/soc-acpi.h b/include/sound/soc-acpi.h index 6d31d535e8f6d..23d6d6bfb0736 100644 --- a/include/sound/soc-acpi.h +++ b/include/sound/soc-acpi.h @@ -68,6 +68,10 @@ static inline struct snd_soc_acpi_mach *snd_soc_acpi_codec_list(void *arg) * @i2s_link_mask: I2S/TDM links enabled on the board * @num_dai_drivers: number of elements in @dai_drivers * @dai_drivers: pointer to dai_drivers, used e.g. in nocodec mode + * @subsystem_vendor: optional PCI SSID vendor value + * @subsystem_device: optional PCI SSID device value + * @subsystem_id_set: true if a value has been written to + * subsystem_vendor and subsystem_device. */ struct snd_soc_acpi_mach_params { u32 acpi_ipc_irq_index; @@ -80,6 +84,9 @@ struct snd_soc_acpi_mach_params { u32 i2s_link_mask; u32 num_dai_drivers; struct snd_soc_dai_driver *dai_drivers; + unsigned short subsystem_vendor; + unsigned short subsystem_device; + bool subsystem_id_set; };
/** diff --git a/include/sound/sof.h b/include/sound/sof.h index d3c41f87ac319..51294f2ba302c 100644 --- a/include/sound/sof.h +++ b/include/sound/sof.h @@ -64,6 +64,14 @@ struct snd_sof_pdata { const char *name; const char *platform;
+ /* + * PCI SSID. As PCI does not define 0 as invalid, the subsystem_id_set + * flag indicates that a value has been written to these members. + */ + unsigned short subsystem_vendor; + unsigned short subsystem_device; + bool subsystem_id_set; + struct device *dev;
/* diff --git a/sound/soc/sof/sof-audio.c b/sound/soc/sof/sof-audio.c index e5405f854a910..563fe6f7789f7 100644 --- a/sound/soc/sof/sof-audio.c +++ b/sound/soc/sof/sof-audio.c @@ -1032,6 +1032,13 @@ int sof_machine_check(struct snd_sof_dev *sdev) mach = snd_sof_machine_select(sdev); if (mach) { sof_pdata->machine = mach; + + if (sof_pdata->subsystem_id_set) { + mach->mach_params.subsystem_vendor = sof_pdata->subsystem_vendor; + mach->mach_params.subsystem_device = sof_pdata->subsystem_device; + mach->mach_params.subsystem_id_set = true; + } + snd_sof_set_mach_params(mach, sdev); return 0; } diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c index f5ece43d0ec24..146d25983b08b 100644 --- a/sound/soc/sof/sof-pci-dev.c +++ b/sound/soc/sof/sof-pci-dev.c @@ -214,6 +214,14 @@ int sof_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) return ret;
sof_pdata->name = pci_name(pci); + + /* PCI defines a vendor ID of 0xFFFF as invalid. */ + if (pci->subsystem_vendor != 0xFFFF) { + sof_pdata->subsystem_vendor = pci->subsystem_vendor; + sof_pdata->subsystem_device = pci->subsystem_device; + sof_pdata->subsystem_id_set = true; + } + sof_pdata->desc = desc; sof_pdata->dev = dev;
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit d8b387544ff4d02eda1d1839a0c601de4b037c33 ]
If the PCI SSID has been set in the struct snd_soc_acpi_mach_params, copy this to struct snd_soc_card so that it can be used by other ASoC components.
This is important for components that must apply system-specific configuration.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230912163207.3498161-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/sof_sdw.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c index 842649501e303..44f583e971e65 100644 --- a/sound/soc/intel/boards/sof_sdw.c +++ b/sound/soc/intel/boards/sof_sdw.c @@ -1934,6 +1934,12 @@ static int mc_probe(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(codec_info_list); i++) codec_info_list[i].amp_num = 0;
+ if (mach->mach_params.subsystem_id_set) { + snd_soc_card_set_pci_ssid(card, + mach->mach_params.subsystem_vendor, + mach->mach_params.subsystem_device); + } + ret = sof_card_dai_links_create(card); if (ret < 0) return ret;
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 1a1c3d794ef65ef2978c5e65e1aed3fe6f014e90 ]
If the driver properties do not define a cirrus,firmware-uid try to get the PCI SSID as the UID.
On PCI-based systems the PCI SSID is used to uniquely identify the specific sound hardware. This is the standard mechanism for x86 systems and is the way to get a unique system identifier for systems that use the CS35L56 on SoundWire.
For non-SoundWire systems there is no Windows equivalent of the ASoC driver in I2C/SPI mode. These would be:
1. HDA systems, which are handled by the HDA subsystem. 2. Linux-specific systems. 3. Composite devices where the cs35l56 is not present in ACPI and is configured using software nodes.
Case 2 can use the firmware-uid property, though the PCI SSID is supported as an alternative, as it is the standard PCI mechanism.
Case 3 is a SoundWire system where some other codec is the SoundWire bridge device and CS35L56 is not listed in ACPI. As these are SoundWire systems they will normally use the PCI SSID.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230912163207.3498161-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/cs35l56.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/sound/soc/codecs/cs35l56.c b/sound/soc/codecs/cs35l56.c index f9059780b7a7b..32d4ab2cd6724 100644 --- a/sound/soc/codecs/cs35l56.c +++ b/sound/soc/codecs/cs35l56.c @@ -772,9 +772,20 @@ static int cs35l56_component_probe(struct snd_soc_component *component) { struct cs35l56_private *cs35l56 = snd_soc_component_get_drvdata(component); struct dentry *debugfs_root = component->debugfs_root; + unsigned short vendor, device;
BUILD_BUG_ON(ARRAY_SIZE(cs35l56_tx_input_texts) != ARRAY_SIZE(cs35l56_tx_input_values));
+ if (!cs35l56->dsp.system_name && + (snd_soc_card_get_pci_ssid(component->card, &vendor, &device) == 0)) { + cs35l56->dsp.system_name = devm_kasprintf(cs35l56->base.dev, + GFP_KERNEL, + "%04x%04x", + vendor, device); + if (!cs35l56->dsp.system_name) + return -ENOMEM; + } + if (!wait_for_completion_timeout(&cs35l56->init_completion, msecs_to_jiffies(5000))) { dev_err(cs35l56->base.dev, "%s: init_completion timed out\n", __func__);
From: Lu Jialin lujialin4@huawei.com
[ Upstream commit 8f4f68e788c3a7a696546291258bfa5fdb215523 ]
We found a hungtask bug in test_aead_vec_cfg as follows:
INFO: task cryptomgr_test:391009 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call trace: __switch_to+0x98/0xe0 __schedule+0x6c4/0xf40 schedule+0xd8/0x1b4 schedule_timeout+0x474/0x560 wait_for_common+0x368/0x4e0 wait_for_completion+0x20/0x30 wait_for_completion+0x20/0x30 test_aead_vec_cfg+0xab4/0xd50 test_aead+0x144/0x1f0 alg_test_aead+0xd8/0x1e0 alg_test+0x634/0x890 cryptomgr_test+0x40/0x70 kthread+0x1e0/0x220 ret_from_fork+0x10/0x18 Kernel panic - not syncing: hung_task: blocked tasks
For padata_do_parallel, when the return err is 0 or -EBUSY, it will call wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal case, aead_request_complete() will be called in pcrypt_aead_serial and the return err is 0 for padata_do_parallel. But, when pinst->flags is PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it won't call aead_request_complete(). Therefore, test_aead_vec_cfg will hung at wait_for_completion(&wait->completion), which will cause hungtask.
The problem comes as following: (padata_do_parallel) | rcu_read_lock_bh(); | err = -EINVAL; | (padata_replace) | pinst->flags |= PADATA_RESET; err = -EBUSY | if (pinst->flags & PADATA_RESET) | rcu_read_unlock_bh() | return err
In order to resolve the problem, we replace the return err -EBUSY with -EAGAIN, which means parallel_data is changing, and the caller should call it again.
v3: remove retry and just change the return err. v2: introduce padata_try_do_parallel() in pcrypt_aead_encrypt and pcrypt_aead_decrypt to solve the hungtask.
Signed-off-by: Lu Jialin lujialin4@huawei.com Signed-off-by: Guo Zihua guozihua@huawei.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- crypto/pcrypt.c | 4 ++++ kernel/padata.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c index 8c1d0ca412137..d0d954fe9d54f 100644 --- a/crypto/pcrypt.c +++ b/crypto/pcrypt.c @@ -117,6 +117,8 @@ static int pcrypt_aead_encrypt(struct aead_request *req) err = padata_do_parallel(ictx->psenc, padata, &ctx->cb_cpu); if (!err) return -EINPROGRESS; + if (err == -EBUSY) + return -EAGAIN;
return err; } @@ -164,6 +166,8 @@ static int pcrypt_aead_decrypt(struct aead_request *req) err = padata_do_parallel(ictx->psdec, padata, &ctx->cb_cpu); if (!err) return -EINPROGRESS; + if (err == -EBUSY) + return -EAGAIN;
return err; } diff --git a/kernel/padata.c b/kernel/padata.c index 222d60195de66..81c8183f3176a 100644 --- a/kernel/padata.c +++ b/kernel/padata.c @@ -202,7 +202,7 @@ int padata_do_parallel(struct padata_shell *ps, *cb_cpu = cpu; }
- err = -EBUSY; + err = -EBUSY; if ((pinst->flags & PADATA_RESET)) goto out;
From: "Geoffrey D. Bennett" g@b4.vu
[ Upstream commit d98cc489029dba4d99714c2e8ec4f5ba249f6851 ]
By moving the USB IDs from the device_info struct into scarlett2_devices[], that will allow for devices with different USB IDs to share the same device_info.
Tested-by: Philippe Perrot philippe@perrot-net.fr Signed-off-by: Geoffrey D. Bennett g@b4.vu Link: https://lore.kernel.org/r/8263368e8d49e6fcebc709817bd82ab79b404468.169470581... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/mixer_scarlett_gen2.c | 63 ++++++++++++--------------------- 1 file changed, 23 insertions(+), 40 deletions(-)
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index d260be8cb6bc0..606dc6b5cedf9 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -317,8 +317,6 @@ struct scarlett2_mux_entry { };
struct scarlett2_device_info { - u32 usb_id; /* USB device identifier */ - /* Gen 3 devices have an internal MSD mode switch that needs * to be disabled in order to access the full functionality of * the device. @@ -440,8 +438,6 @@ struct scarlett2_data { /*** Model-specific data ***/
static const struct scarlett2_device_info s6i6_gen2_info = { - .usb_id = USB_ID(0x1235, 0x8203), - .config_set = SCARLETT2_CONFIG_SET_GEN_2, .level_input_count = 2, .pad_input_count = 2, @@ -486,8 +482,6 @@ static const struct scarlett2_device_info s6i6_gen2_info = { };
static const struct scarlett2_device_info s18i8_gen2_info = { - .usb_id = USB_ID(0x1235, 0x8204), - .config_set = SCARLETT2_CONFIG_SET_GEN_2, .level_input_count = 2, .pad_input_count = 4, @@ -535,8 +529,6 @@ static const struct scarlett2_device_info s18i8_gen2_info = { };
static const struct scarlett2_device_info s18i20_gen2_info = { - .usb_id = USB_ID(0x1235, 0x8201), - .config_set = SCARLETT2_CONFIG_SET_GEN_2, .line_out_hw_vol = 1,
@@ -589,8 +581,6 @@ static const struct scarlett2_device_info s18i20_gen2_info = { };
static const struct scarlett2_device_info solo_gen3_info = { - .usb_id = USB_ID(0x1235, 0x8211), - .has_msd_mode = 1, .config_set = SCARLETT2_CONFIG_SET_NO_MIXER, .level_input_count = 1, @@ -602,8 +592,6 @@ static const struct scarlett2_device_info solo_gen3_info = { };
static const struct scarlett2_device_info s2i2_gen3_info = { - .usb_id = USB_ID(0x1235, 0x8210), - .has_msd_mode = 1, .config_set = SCARLETT2_CONFIG_SET_NO_MIXER, .level_input_count = 2, @@ -614,8 +602,6 @@ static const struct scarlett2_device_info s2i2_gen3_info = { };
static const struct scarlett2_device_info s4i4_gen3_info = { - .usb_id = USB_ID(0x1235, 0x8212), - .has_msd_mode = 1, .config_set = SCARLETT2_CONFIG_SET_GEN_3, .level_input_count = 2, @@ -660,8 +646,6 @@ static const struct scarlett2_device_info s4i4_gen3_info = { };
static const struct scarlett2_device_info s8i6_gen3_info = { - .usb_id = USB_ID(0x1235, 0x8213), - .has_msd_mode = 1, .config_set = SCARLETT2_CONFIG_SET_GEN_3, .level_input_count = 2, @@ -713,8 +697,6 @@ static const struct scarlett2_device_info s8i6_gen3_info = { };
static const struct scarlett2_device_info s18i8_gen3_info = { - .usb_id = USB_ID(0x1235, 0x8214), - .has_msd_mode = 1, .config_set = SCARLETT2_CONFIG_SET_GEN_3, .line_out_hw_vol = 1, @@ -783,8 +765,6 @@ static const struct scarlett2_device_info s18i8_gen3_info = { };
static const struct scarlett2_device_info s18i20_gen3_info = { - .usb_id = USB_ID(0x1235, 0x8215), - .has_msd_mode = 1, .config_set = SCARLETT2_CONFIG_SET_GEN_3, .line_out_hw_vol = 1, @@ -848,8 +828,6 @@ static const struct scarlett2_device_info s18i20_gen3_info = { };
static const struct scarlett2_device_info clarett_8pre_info = { - .usb_id = USB_ID(0x1235, 0x820c), - .config_set = SCARLETT2_CONFIG_SET_CLARETT, .line_out_hw_vol = 1, .level_input_count = 2, @@ -902,25 +880,30 @@ static const struct scarlett2_device_info clarett_8pre_info = { } }, };
-static const struct scarlett2_device_info *scarlett2_devices[] = { +struct scarlett2_device_entry { + const u32 usb_id; /* USB device identifier */ + const struct scarlett2_device_info *info; +}; + +static const struct scarlett2_device_entry scarlett2_devices[] = { /* Supported Gen 2 devices */ - &s6i6_gen2_info, - &s18i8_gen2_info, - &s18i20_gen2_info, + { USB_ID(0x1235, 0x8203), &s6i6_gen2_info }, + { USB_ID(0x1235, 0x8204), &s18i8_gen2_info }, + { USB_ID(0x1235, 0x8201), &s18i20_gen2_info },
/* Supported Gen 3 devices */ - &solo_gen3_info, - &s2i2_gen3_info, - &s4i4_gen3_info, - &s8i6_gen3_info, - &s18i8_gen3_info, - &s18i20_gen3_info, + { USB_ID(0x1235, 0x8211), &solo_gen3_info }, + { USB_ID(0x1235, 0x8210), &s2i2_gen3_info }, + { USB_ID(0x1235, 0x8212), &s4i4_gen3_info }, + { USB_ID(0x1235, 0x8213), &s8i6_gen3_info }, + { USB_ID(0x1235, 0x8214), &s18i8_gen3_info }, + { USB_ID(0x1235, 0x8215), &s18i20_gen3_info },
/* Supported Clarett+ devices */ - &clarett_8pre_info, + { USB_ID(0x1235, 0x820c), &clarett_8pre_info },
/* End of list */ - NULL + { 0, NULL }, };
/* get the starting port index number for a given port type/direction */ @@ -4072,17 +4055,17 @@ static int scarlett2_init_notify(struct usb_mixer_interface *mixer)
static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer) { - const struct scarlett2_device_info **info = scarlett2_devices; + const struct scarlett2_device_entry *entry = scarlett2_devices; int err;
- /* Find device in scarlett2_devices */ - while (*info && (*info)->usb_id != mixer->chip->usb_id) - info++; - if (!*info) + /* Find entry in scarlett2_devices */ + while (entry->usb_id && entry->usb_id != mixer->chip->usb_id) + entry++; + if (!entry->usb_id) return -EINVAL;
/* Initialise private data */ - err = scarlett2_init_private(mixer, *info); + err = scarlett2_init_private(mixer, entry->info); if (err < 0) return err;
From: Rander Wang rander.wang@intel.com
[ Upstream commit c1c48fd6bbe788458e3685fea74bdb3cb148ff93 ]
Driver will receive exception IPC message and process it by snd_sof_dsp_panic.
Signed-off-by: Rander Wang rander.wang@intel.com Reviewed-by: Péter Ujfalusi peter.ujfalusi@linux.intel.com Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com Signed-off-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230919092416.4137-10-peter.ujfalusi@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/ipc4.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/sound/soc/sof/ipc4.c b/sound/soc/sof/ipc4.c index ab6eddd91bb77..1b09496733fb8 100644 --- a/sound/soc/sof/ipc4.c +++ b/sound/soc/sof/ipc4.c @@ -614,6 +614,9 @@ static void sof_ipc4_rx_msg(struct snd_sof_dev *sdev) case SOF_IPC4_NOTIFY_LOG_BUFFER_STATUS: sof_ipc4_mtrace_update_pos(sdev, SOF_IPC4_LOG_CORE_GET(ipc4_msg->primary)); break; + case SOF_IPC4_NOTIFY_EXCEPTION_CAUGHT: + snd_sof_dsp_panic(sdev, 0, true); + break; default: dev_dbg(sdev->dev, "Unhandled DSP message: %#x|%#x\n", ipc4_msg->primary, ipc4_msg->extension);
From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com
[ Upstream commit 8bf7187d978610b9e327a3d92728c8864a575ebd ]
Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of custom masking and shifting, and remove extract_width() which only wraps that FIELD_GET().
Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20230919125648.1920-2-ilpo.jarvinen@linux.intel.co... Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Reviewed-by: Dean Luick dean.luick@cornelisnetworks.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hfi1/pcie.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c index 08732e1ac9662..c132a9c073bff 100644 --- a/drivers/infiniband/hw/hfi1/pcie.c +++ b/drivers/infiniband/hw/hfi1/pcie.c @@ -3,6 +3,7 @@ * Copyright(c) 2015 - 2019 Intel Corporation. */
+#include <linux/bitfield.h> #include <linux/pci.h> #include <linux/io.h> #include <linux/delay.h> @@ -210,12 +211,6 @@ static u32 extract_speed(u16 linkstat) return speed; }
-/* return the PCIe link speed from the given link status */ -static u32 extract_width(u16 linkstat) -{ - return (linkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT; -} - /* read the link status and set dd->{lbus_width,lbus_speed,lbus_info} */ static void update_lbus_info(struct hfi1_devdata *dd) { @@ -228,7 +223,7 @@ static void update_lbus_info(struct hfi1_devdata *dd) return; }
- dd->lbus_width = extract_width(linkstat); + dd->lbus_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, linkstat); dd->lbus_speed = extract_speed(linkstat); snprintf(dd->lbus_info, sizeof(dd->lbus_info), "PCIe,%uMHz,x%u", dd->lbus_speed, dd->lbus_width);
From: Yihang Li liyihang9@huawei.com
[ Upstream commit 6de426f9276c448e2db7238911c97fb157cb23be ]
If init debugfs failed during device registration due to memory allocation failure, debugfs_remove_recursive() is called, after which debugfs_dir is not set to NULL. debugfs_remove_recursive() will be called again during device removal. As a result, illegal pointer is accessed.
[ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs! ... [ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 1669.872669] pc : down_write+0x24/0x70 [ 1669.876315] lr : down_write+0x1c/0x70 [ 1669.879961] sp : ffff000036f53a30 [ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8 [ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000 [ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270 [ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8 [ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310 [ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10 [ 1669.914982] x17: 0000000000000000 x16: 0000000000000000 [ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870 [ 1669.925555] x13: 0000000000000040 x12: 0000000000000228 [ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0 [ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10 [ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff [ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00 [ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000 [ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001 [ 1669.962563] Call trace: [ 1669.965000] down_write+0x24/0x70 [ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0 [ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main] [ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw] [ 1669.984175] pci_device_remove+0x48/0xd8 [ 1669.988082] device_release_driver_internal+0x1b4/0x250 [ 1669.993282] device_release_driver+0x28/0x38 [ 1669.997534] pci_stop_bus_device+0x84/0xb8 [ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40 [ 1670.007244] remove_store+0xfc/0x140 [ 1670.010802] dev_attr_store+0x44/0x60 [ 1670.014448] sysfs_kf_write+0x58/0x80 [ 1670.018095] kernfs_fop_write+0xe8/0x1f0 [ 1670.022000] __vfs_write+0x60/0x190 [ 1670.025472] vfs_write+0xac/0x1c0 [ 1670.028771] ksys_write+0x6c/0xd8 [ 1670.032071] __arm64_sys_write+0x24/0x30 [ 1670.035977] el0_svc_common+0x78/0x130 [ 1670.039710] el0_svc_handler+0x38/0x78 [ 1670.043442] el0_svc+0x8/0xc
To fix this, set debugfs_dir to NULL after debugfs_remove_recursive().
Signed-off-by: Yihang Li liyihang9@huawei.com Signed-off-by: Xingui Yang yangxingui@huawei.com Signed-off-by: Xiang Chen chenxiang66@hisilicon.com Link: https://lore.kernel.org/r/1694571327-78697-2-git-send-email-chenxiang66@hisi... Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index bbb64ee6afd7c..089186fe17915 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -4865,6 +4865,12 @@ static void debugfs_bist_init_v3_hw(struct hisi_hba *hisi_hba) hisi_hba->debugfs_bist_linkrate = SAS_LINK_RATE_1_5_GBPS; }
+static void debugfs_exit_v3_hw(struct hisi_hba *hisi_hba) +{ + debugfs_remove_recursive(hisi_hba->debugfs_dir); + hisi_hba->debugfs_dir = NULL; +} + static void debugfs_init_v3_hw(struct hisi_hba *hisi_hba) { struct device *dev = hisi_hba->dev; @@ -4888,18 +4894,13 @@ static void debugfs_init_v3_hw(struct hisi_hba *hisi_hba)
for (i = 0; i < hisi_sas_debugfs_dump_count; i++) { if (debugfs_alloc_v3_hw(hisi_hba, i)) { - debugfs_remove_recursive(hisi_hba->debugfs_dir); + debugfs_exit_v3_hw(hisi_hba); dev_dbg(dev, "failed to init debugfs!\n"); break; } } }
-static void debugfs_exit_v3_hw(struct hisi_hba *hisi_hba) -{ - debugfs_remove_recursive(hisi_hba->debugfs_dir); -} - static int hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id) {
From: Tyrel Datwyler tyreld@linux.ibm.com
[ Upstream commit b39f2d10b86d0af353ea339e5815820026bca48f ]
In practice the driver should never send more commands than are allocated to a queue's event pool. In the unlikely event that this happens, the code asserts a BUG_ON, and in the case that the kernel is not configured to crash on panic returns a junk event pointer from the empty event list causing things to spiral from there. This BUG_ON is a historical artifact of the ibmvfc driver first being upstreamed, and it is well known now that the use of BUG_ON is bad practice except in the most unrecoverable scenario. There is nothing about this scenario that prevents the driver from recovering and carrying on.
Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL pointer in the case of an empty event pool. Update all call sites to ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate failure or recovery action.
Signed-off-by: Tyrel Datwyler tyreld@linux.ibm.com Link: https://lore.kernel.org/r/20230921225435.3537728-2-tyreld@linux.ibm.com Reviewed-by: Brian King brking@linux.vnet.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ibmvscsi/ibmvfc.c | 124 ++++++++++++++++++++++++++++++++- 1 file changed, 122 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index ce9eb00e2ca04..712d109cb5589 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -1519,7 +1519,11 @@ static struct ibmvfc_event *ibmvfc_get_event(struct ibmvfc_queue *queue) unsigned long flags;
spin_lock_irqsave(&queue->l_lock, flags); - BUG_ON(list_empty(&queue->free)); + if (list_empty(&queue->free)) { + ibmvfc_log(queue->vhost, 4, "empty event pool on queue:%ld\n", queue->hwq_id); + spin_unlock_irqrestore(&queue->l_lock, flags); + return NULL; + } evt = list_entry(queue->free.next, struct ibmvfc_event, queue_list); atomic_set(&evt->free, 0); list_del(&evt->queue_list); @@ -1948,9 +1952,15 @@ static int ibmvfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd) if (vhost->using_channels) { scsi_channel = hwq % vhost->scsi_scrqs.active_queues; evt = ibmvfc_get_event(&vhost->scsi_scrqs.scrqs[scsi_channel]); + if (!evt) + return SCSI_MLQUEUE_HOST_BUSY; + evt->hwq = hwq % vhost->scsi_scrqs.active_queues; - } else + } else { evt = ibmvfc_get_event(&vhost->crq); + if (!evt) + return SCSI_MLQUEUE_HOST_BUSY; + }
ibmvfc_init_event(evt, ibmvfc_scsi_done, IBMVFC_CMD_FORMAT); evt->cmnd = cmnd; @@ -2038,6 +2048,11 @@ static int ibmvfc_bsg_timeout(struct bsg_job *job)
vhost->aborting_passthru = 1; evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + spin_unlock_irqrestore(vhost->host->host_lock, flags); + return -ENOMEM; + } + ibmvfc_init_event(evt, ibmvfc_bsg_timeout_done, IBMVFC_MAD_FORMAT);
tmf = &evt->iu.tmf; @@ -2096,6 +2111,10 @@ static int ibmvfc_bsg_plogi(struct ibmvfc_host *vhost, unsigned int port_id) goto unlock_out;
evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + rc = -ENOMEM; + goto unlock_out; + } ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_MAD_FORMAT); plogi = &evt->iu.plogi; memset(plogi, 0, sizeof(*plogi)); @@ -2214,6 +2233,11 @@ static int ibmvfc_bsg_request(struct bsg_job *job) }
evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + spin_unlock_irqrestore(vhost->host->host_lock, flags); + rc = -ENOMEM; + goto out; + } ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_MAD_FORMAT); mad = &evt->iu.passthru;
@@ -2302,6 +2326,11 @@ static int ibmvfc_reset_device(struct scsi_device *sdev, int type, char *desc) else evt = ibmvfc_get_event(&vhost->crq);
+ if (!evt) { + spin_unlock_irqrestore(vhost->host->host_lock, flags); + return -ENOMEM; + } + ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_CMD_FORMAT); tmf = ibmvfc_init_vfc_cmd(evt, sdev); iu = ibmvfc_get_fcp_iu(vhost, tmf); @@ -2505,6 +2534,8 @@ static struct ibmvfc_event *ibmvfc_init_tmf(struct ibmvfc_queue *queue, struct ibmvfc_tmf *tmf;
evt = ibmvfc_get_event(queue); + if (!evt) + return NULL; ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_MAD_FORMAT);
tmf = &evt->iu.tmf; @@ -2561,6 +2592,11 @@ static int ibmvfc_cancel_all_mq(struct scsi_device *sdev, int type)
if (found_evt && vhost->logged_in) { evt = ibmvfc_init_tmf(&queues[i], sdev, type); + if (!evt) { + spin_unlock(queues[i].q_lock); + spin_unlock_irqrestore(vhost->host->host_lock, flags); + return -ENOMEM; + } evt->sync_iu = &queues[i].cancel_rsp; ibmvfc_send_event(evt, vhost, default_timeout); list_add_tail(&evt->cancel, &cancelq); @@ -2774,6 +2810,10 @@ static int ibmvfc_abort_task_set(struct scsi_device *sdev)
if (vhost->state == IBMVFC_ACTIVE) { evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + spin_unlock_irqrestore(vhost->host->host_lock, flags); + return -ENOMEM; + } ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_CMD_FORMAT); tmf = ibmvfc_init_vfc_cmd(evt, sdev); iu = ibmvfc_get_fcp_iu(vhost, tmf); @@ -4032,6 +4072,12 @@ static void ibmvfc_tgt_send_prli(struct ibmvfc_target *tgt)
kref_get(&tgt->kref); evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); + kref_put(&tgt->kref, ibmvfc_release_tgt); + __ibmvfc_reset_host(vhost); + return; + } vhost->discovery_threads++; ibmvfc_init_event(evt, ibmvfc_tgt_prli_done, IBMVFC_MAD_FORMAT); evt->tgt = tgt; @@ -4139,6 +4185,12 @@ static void ibmvfc_tgt_send_plogi(struct ibmvfc_target *tgt) kref_get(&tgt->kref); tgt->logo_rcvd = 0; evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); + kref_put(&tgt->kref, ibmvfc_release_tgt); + __ibmvfc_reset_host(vhost); + return; + } vhost->discovery_threads++; ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT_WAIT); ibmvfc_init_event(evt, ibmvfc_tgt_plogi_done, IBMVFC_MAD_FORMAT); @@ -4215,6 +4267,8 @@ static struct ibmvfc_event *__ibmvfc_tgt_get_implicit_logout_evt(struct ibmvfc_t
kref_get(&tgt->kref); evt = ibmvfc_get_event(&vhost->crq); + if (!evt) + return NULL; ibmvfc_init_event(evt, done, IBMVFC_MAD_FORMAT); evt->tgt = tgt; mad = &evt->iu.implicit_logout; @@ -4242,6 +4296,13 @@ static void ibmvfc_tgt_implicit_logout(struct ibmvfc_target *tgt) vhost->discovery_threads++; evt = __ibmvfc_tgt_get_implicit_logout_evt(tgt, ibmvfc_tgt_implicit_logout_done); + if (!evt) { + vhost->discovery_threads--; + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); + kref_put(&tgt->kref, ibmvfc_release_tgt); + __ibmvfc_reset_host(vhost); + return; + }
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT_WAIT); if (ibmvfc_send_event(evt, vhost, default_timeout)) { @@ -4381,6 +4442,12 @@ static void ibmvfc_tgt_move_login(struct ibmvfc_target *tgt)
kref_get(&tgt->kref); evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT); + kref_put(&tgt->kref, ibmvfc_release_tgt); + __ibmvfc_reset_host(vhost); + return; + } vhost->discovery_threads++; ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_INIT_WAIT); ibmvfc_init_event(evt, ibmvfc_tgt_move_login_done, IBMVFC_MAD_FORMAT); @@ -4547,6 +4614,14 @@ static void ibmvfc_adisc_timeout(struct timer_list *t) vhost->abort_threads++; kref_get(&tgt->kref); evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + tgt_err(tgt, "Failed to get cancel event for ADISC.\n"); + vhost->abort_threads--; + kref_put(&tgt->kref, ibmvfc_release_tgt); + __ibmvfc_reset_host(vhost); + spin_unlock_irqrestore(vhost->host->host_lock, flags); + return; + } ibmvfc_init_event(evt, ibmvfc_tgt_adisc_cancel_done, IBMVFC_MAD_FORMAT);
evt->tgt = tgt; @@ -4597,6 +4672,12 @@ static void ibmvfc_tgt_adisc(struct ibmvfc_target *tgt)
kref_get(&tgt->kref); evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); + kref_put(&tgt->kref, ibmvfc_release_tgt); + __ibmvfc_reset_host(vhost); + return; + } vhost->discovery_threads++; ibmvfc_init_event(evt, ibmvfc_tgt_adisc_done, IBMVFC_MAD_FORMAT); evt->tgt = tgt; @@ -4700,6 +4781,12 @@ static void ibmvfc_tgt_query_target(struct ibmvfc_target *tgt)
kref_get(&tgt->kref); evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); + kref_put(&tgt->kref, ibmvfc_release_tgt); + __ibmvfc_reset_host(vhost); + return; + } vhost->discovery_threads++; evt->tgt = tgt; ibmvfc_init_event(evt, ibmvfc_tgt_query_target_done, IBMVFC_MAD_FORMAT); @@ -4872,6 +4959,13 @@ static void ibmvfc_discover_targets(struct ibmvfc_host *vhost) { struct ibmvfc_discover_targets *mad; struct ibmvfc_event *evt = ibmvfc_get_event(&vhost->crq); + int level = IBMVFC_DEFAULT_LOG_LEVEL; + + if (!evt) { + ibmvfc_log(vhost, level, "Discover Targets failed: no available events\n"); + ibmvfc_hard_reset_host(vhost); + return; + }
ibmvfc_init_event(evt, ibmvfc_discover_targets_done, IBMVFC_MAD_FORMAT); mad = &evt->iu.discover_targets; @@ -4949,8 +5043,15 @@ static void ibmvfc_channel_setup(struct ibmvfc_host *vhost) struct ibmvfc_scsi_channels *scrqs = &vhost->scsi_scrqs; unsigned int num_channels = min(vhost->client_scsi_channels, vhost->max_vios_scsi_channels); + int level = IBMVFC_DEFAULT_LOG_LEVEL; int i;
+ if (!evt) { + ibmvfc_log(vhost, level, "Channel Setup failed: no available events\n"); + ibmvfc_hard_reset_host(vhost); + return; + } + memset(setup_buf, 0, sizeof(*setup_buf)); if (num_channels == 0) setup_buf->flags = cpu_to_be32(IBMVFC_CANCEL_CHANNELS); @@ -5012,6 +5113,13 @@ static void ibmvfc_channel_enquiry(struct ibmvfc_host *vhost) { struct ibmvfc_channel_enquiry *mad; struct ibmvfc_event *evt = ibmvfc_get_event(&vhost->crq); + int level = IBMVFC_DEFAULT_LOG_LEVEL; + + if (!evt) { + ibmvfc_log(vhost, level, "Channel Enquiry failed: no available events\n"); + ibmvfc_hard_reset_host(vhost); + return; + }
ibmvfc_init_event(evt, ibmvfc_channel_enquiry_done, IBMVFC_MAD_FORMAT); mad = &evt->iu.channel_enquiry; @@ -5134,6 +5242,12 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *vhost) struct ibmvfc_npiv_login_mad *mad; struct ibmvfc_event *evt = ibmvfc_get_event(&vhost->crq);
+ if (!evt) { + ibmvfc_dbg(vhost, "NPIV Login failed: no available events\n"); + ibmvfc_hard_reset_host(vhost); + return; + } + ibmvfc_gather_partition_info(vhost); ibmvfc_set_login_info(vhost); ibmvfc_init_event(evt, ibmvfc_npiv_login_done, IBMVFC_MAD_FORMAT); @@ -5198,6 +5312,12 @@ static void ibmvfc_npiv_logout(struct ibmvfc_host *vhost) struct ibmvfc_event *evt;
evt = ibmvfc_get_event(&vhost->crq); + if (!evt) { + ibmvfc_dbg(vhost, "NPIV Logout failed: no available events\n"); + ibmvfc_hard_reset_host(vhost); + return; + } + ibmvfc_init_event(evt, ibmvfc_npiv_logout_done, IBMVFC_MAD_FORMAT);
mad = &evt->iu.npiv_logout;
From: Juntong Deng juntong.deng@outlook.com
[ Upstream commit 525b861a008143048535011f3816d407940f4bfa ]
l2nbperpage is log2(number of blks per page), and the minimum legal value should be 0, not negative.
In the case of l2nbperpage being negative, an error will occur when subsequently used as shift exponent.
Syzbot reported this bug:
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12 shift exponent -16777216 is negative
Reported-by: syzbot+debee9ab7ae2b34b0307@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=debee9ab7ae2b34b0307 Signed-off-by: Juntong Deng juntong.deng@outlook.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_dmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 88afd108c2dd2..3a1842348112d 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -180,7 +180,8 @@ int dbMount(struct inode *ipbmap) bmp->db_nfree = le64_to_cpu(dbmp_le->dn_nfree);
bmp->db_l2nbperpage = le32_to_cpu(dbmp_le->dn_l2nbperpage); - if (bmp->db_l2nbperpage > L2PSIZE - L2MINBLOCKSIZE) { + if (bmp->db_l2nbperpage > L2PSIZE - L2MINBLOCKSIZE || + bmp->db_l2nbperpage < 0) { err = -EINVAL; goto err_release_metapage; }
From: Juntong Deng juntong.deng@outlook.com
[ Upstream commit 64933ab7b04881c6c18b21ff206c12278341c72e ]
Both db_maxag and db_agpref are used as the index of the db_agfree array, but there is currently no validity check for db_maxag and db_agpref, which can lead to errors.
The following is related bug reported by Syzbot:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20 index 7936 is out of range for type 'atomic_t[128]'
Add checking that the values of db_maxag and db_agpref are valid indexes for the db_agfree array.
Reported-by: syzbot+38e876a8aa44b7115c76@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=38e876a8aa44b7115c76 Signed-off-by: Juntong Deng juntong.deng@outlook.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_dmap.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 3a1842348112d..4d59373f9e6c9 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -195,6 +195,12 @@ int dbMount(struct inode *ipbmap) bmp->db_maxlevel = le32_to_cpu(dbmp_le->dn_maxlevel); bmp->db_maxag = le32_to_cpu(dbmp_le->dn_maxag); bmp->db_agpref = le32_to_cpu(dbmp_le->dn_agpref); + if (bmp->db_maxag >= MAXAG || bmp->db_maxag < 0 || + bmp->db_agpref >= MAXAG || bmp->db_agpref < 0) { + err = -EINVAL; + goto err_release_metapage; + } + bmp->db_aglevel = le32_to_cpu(dbmp_le->dn_aglevel); bmp->db_agheight = le32_to_cpu(dbmp_le->dn_agheight); bmp->db_agwidth = le32_to_cpu(dbmp_le->dn_agwidth);
From: Manas Ghandat ghandatmanas@gmail.com
[ Upstream commit 22cad8bc1d36547cdae0eef316c47d917ce3147c ]
Currently while searching for dmtree_t for sufficient free blocks there is an array out of bounds while getting element in tp->dm_stree. To add the required check for out of bound we first need to determine the type of dmtree. Thus added an extra parameter to dbFindLeaf so that the type of tree can be determined and the required check can be applied.
Reported-by: syzbot+aea1ad91e854d0a83e04@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=aea1ad91e854d0a83e04 Signed-off-by: Manas Ghandat ghandatmanas@gmail.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_dmap.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 4d59373f9e6c9..11c77757ead9e 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -87,7 +87,7 @@ static int dbAllocCtl(struct bmap * bmp, s64 nblocks, int l2nb, s64 blkno, static int dbExtend(struct inode *ip, s64 blkno, s64 nblocks, s64 addnblocks); static int dbFindBits(u32 word, int l2nb); static int dbFindCtl(struct bmap * bmp, int l2nb, int level, s64 * blkno); -static int dbFindLeaf(dmtree_t * tp, int l2nb, int *leafidx); +static int dbFindLeaf(dmtree_t *tp, int l2nb, int *leafidx, bool is_ctl); static int dbFreeBits(struct bmap * bmp, struct dmap * dp, s64 blkno, int nblocks); static int dbFreeDmap(struct bmap * bmp, struct dmap * dp, s64 blkno, @@ -1717,7 +1717,7 @@ static int dbFindCtl(struct bmap * bmp, int l2nb, int level, s64 * blkno) * dbFindLeaf() returns the index of the leaf at which * free space was found. */ - rc = dbFindLeaf((dmtree_t *) dcp, l2nb, &leafidx); + rc = dbFindLeaf((dmtree_t *) dcp, l2nb, &leafidx, true);
/* release the buffer. */ @@ -1964,7 +1964,7 @@ dbAllocDmapLev(struct bmap * bmp, * free space. if sufficient free space is found, dbFindLeaf() * returns the index of the leaf at which free space was found. */ - if (dbFindLeaf((dmtree_t *) & dp->tree, l2nb, &leafidx)) + if (dbFindLeaf((dmtree_t *) &dp->tree, l2nb, &leafidx, false)) return -ENOSPC;
if (leafidx < 0) @@ -2928,14 +2928,18 @@ static void dbAdjTree(dmtree_t * tp, int leafno, int newval) * leafidx - return pointer to be set to the index of the leaf * describing at least l2nb free blocks if sufficient * free blocks are found. + * is_ctl - determines if the tree is of type ctl * * RETURN VALUES: * 0 - success * -ENOSPC - insufficient free blocks. */ -static int dbFindLeaf(dmtree_t * tp, int l2nb, int *leafidx) +static int dbFindLeaf(dmtree_t *tp, int l2nb, int *leafidx, bool is_ctl) { int ti, n = 0, k, x = 0; + int max_size; + + max_size = is_ctl ? CTLTREESIZE : TREESIZE;
/* first check the root of the tree to see if there is * sufficient free space. @@ -2956,6 +2960,8 @@ static int dbFindLeaf(dmtree_t * tp, int l2nb, int *leafidx) /* sufficient free space found. move to the next * level (or quit if this is the last level). */ + if (x + n > max_size) + return -ENOSPC; if (l2nb <= tp->dmt_stree[x + n]) break; }
From: Manas Ghandat ghandatmanas@gmail.com
[ Upstream commit 05d9ea1ceb62a55af6727a69269a4fd310edf483 ]
Currently there is not check against the agno of the iag while allocating new inodes to avoid fragmentation problem. Added the check which is required.
Reported-by: syzbot+79d792676d8ac050949f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=79d792676d8ac050949f Signed-off-by: Manas Ghandat ghandatmanas@gmail.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_imap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c index 923a58422c461..1b267eec3f367 100644 --- a/fs/jfs/jfs_imap.c +++ b/fs/jfs/jfs_imap.c @@ -1320,7 +1320,7 @@ diInitInode(struct inode *ip, int iagno, int ino, int extno, struct iag * iagp) int diAlloc(struct inode *pip, bool dir, struct inode *ip) { int rc, ino, iagno, addext, extno, bitno, sword; - int nwords, rem, i, agno; + int nwords, rem, i, agno, dn_numag; u32 mask, inosmap, extsmap; struct inode *ipimap; struct metapage *mp; @@ -1356,6 +1356,9 @@ int diAlloc(struct inode *pip, bool dir, struct inode *ip)
/* get the ag number of this iag */ agno = BLKTOAG(JFS_IP(pip)->agstart, JFS_SBI(pip->i_sb)); + dn_numag = JFS_SBI(pip->i_sb)->bmap->db_numag; + if (agno < 0 || agno > dn_numag) + return -EIO;
if (atomic_read(&JFS_SBI(pip->i_sb)->bmap->db_active[agno])) { /*
From: Mikhail Khvainitski me@khvoinitsky.org
[ Upstream commit 46a0a2c96f0f47628190f122c2e3d879e590bcbe ]
Built-in firmware of cptkbd handles scrolling by itself (when middle button is pressed) but with issues: it does not support horizontal and hi-res scrolling and upon middle button release it sends middle button click even if there was a scrolling event. Commit 3cb5ff0220e3 ("HID: lenovo: Hide middle-button press until release") workarounds last issue but it's impossible to workaround scrolling-related issues without firmware modification.
Likely, Dennis Schneider has reverse engineered the firmware and provided an instruction on how to patch it [1]. However, aforementioned workaround prevents userspace (libinput) from knowing exact moment when middle button has been pressed down and performing "On-Button scrolling". This commit detects correctly-behaving patched firmware if cursor movement events has been received during middle button being pressed and stops applying workaround for this device.
Link: https://hohlerde.org/rauch/en/elektronik/projekte/tpkbd-fix/ [1]
Signed-off-by: Mikhail Khvainitski me@khvoinitsky.org Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-lenovo.c | 68 ++++++++++++++++++++++++++-------------- 1 file changed, 45 insertions(+), 23 deletions(-)
diff --git a/drivers/hid/hid-lenovo.c b/drivers/hid/hid-lenovo.c index 44763c0da4441..9c1181313e44d 100644 --- a/drivers/hid/hid-lenovo.c +++ b/drivers/hid/hid-lenovo.c @@ -51,7 +51,12 @@ struct lenovo_drvdata { int select_right; int sensitivity; int press_speed; - u8 middlebutton_state; /* 0:Up, 1:Down (undecided), 2:Scrolling */ + /* 0: Up + * 1: Down (undecided) + * 2: Scrolling + * 3: Patched firmware, disable workaround + */ + u8 middlebutton_state; bool fn_lock; };
@@ -668,31 +673,48 @@ static int lenovo_event_cptkbd(struct hid_device *hdev, { struct lenovo_drvdata *cptkbd_data = hid_get_drvdata(hdev);
- /* "wheel" scroll events */ - if (usage->type == EV_REL && (usage->code == REL_WHEEL || - usage->code == REL_HWHEEL)) { - /* Scroll events disable middle-click event */ - cptkbd_data->middlebutton_state = 2; - return 0; - } + if (cptkbd_data->middlebutton_state != 3) { + /* REL_X and REL_Y events during middle button pressed + * are only possible on patched, bug-free firmware + * so set middlebutton_state to 3 + * to never apply workaround anymore + */ + if (cptkbd_data->middlebutton_state == 1 && + usage->type == EV_REL && + (usage->code == REL_X || usage->code == REL_Y)) { + cptkbd_data->middlebutton_state = 3; + /* send middle button press which was hold before */ + input_event(field->hidinput->input, + EV_KEY, BTN_MIDDLE, 1); + input_sync(field->hidinput->input); + }
- /* Middle click events */ - if (usage->type == EV_KEY && usage->code == BTN_MIDDLE) { - if (value == 1) { - cptkbd_data->middlebutton_state = 1; - } else if (value == 0) { - if (cptkbd_data->middlebutton_state == 1) { - /* No scrolling inbetween, send middle-click */ - input_event(field->hidinput->input, - EV_KEY, BTN_MIDDLE, 1); - input_sync(field->hidinput->input); - input_event(field->hidinput->input, - EV_KEY, BTN_MIDDLE, 0); - input_sync(field->hidinput->input); + /* "wheel" scroll events */ + if (usage->type == EV_REL && (usage->code == REL_WHEEL || + usage->code == REL_HWHEEL)) { + /* Scroll events disable middle-click event */ + cptkbd_data->middlebutton_state = 2; + return 0; + } + + /* Middle click events */ + if (usage->type == EV_KEY && usage->code == BTN_MIDDLE) { + if (value == 1) { + cptkbd_data->middlebutton_state = 1; + } else if (value == 0) { + if (cptkbd_data->middlebutton_state == 1) { + /* No scrolling inbetween, send middle-click */ + input_event(field->hidinput->input, + EV_KEY, BTN_MIDDLE, 1); + input_sync(field->hidinput->input); + input_event(field->hidinput->input, + EV_KEY, BTN_MIDDLE, 0); + input_sync(field->hidinput->input); + } + cptkbd_data->middlebutton_state = 0; } - cptkbd_data->middlebutton_state = 0; + return 1; } - return 1; }
if (usage->type == EV_KEY && usage->code == KEY_FN_ESC && value == 1) {
From: Vincent Whitchurch vincent.whitchurch@axis.com
[ Upstream commit b0150014878c32197cfa66e3e2f79e57f66babc0 ]
Place IRQ handlers such as gic_handle_irq() in the irqentry section even if FUNCTION_GRAPH_TRACER is not enabled. Without this, the stack depot's filter_irq_stacks() does not correctly filter out IRQ stacks in those configurations, which hampers deduplication and eventually leads to "Stack depot reached limit capacity" splats with KASAN.
A similar fix was done for arm64 in commit f6794950f0e5ba37e3bbed ("arm64: set __exception_irq_entry with __irq_entry as a default").
Link: https://lore.kernel.org/r/20230803-arm-irqentry-v1-1-8aad8e260b1c@axis.com
Signed-off-by: Vincent Whitchurch vincent.whitchurch@axis.com Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/include/asm/exception.h | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h index 58e039a851af0..3c82975d46db3 100644 --- a/arch/arm/include/asm/exception.h +++ b/arch/arm/include/asm/exception.h @@ -10,10 +10,6 @@
#include <linux/interrupt.h>
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER #define __exception_irq_entry __irq_entry -#else -#define __exception_irq_entry -#endif
#endif /* __ASM_ARM_EXCEPTION_H */
From: Cezary Rojewski cezary.rojewski@intel.com
[ Upstream commit f93dc90c2e8ed664985e366aa6459ac83cdab236 ]
While AudioDSP drivers assign streams exclusively of HOST or LINK type, nothing blocks a user to attempt to assign a COUPLED stream. As supplied substream instance may be a stub, what is the case when code-loading, such scenario ends with null-ptr-deref.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com Link: https://lore.kernel.org/r/20231006102857.749143-2-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/hda/hdac_stream.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c index 2633a4bb1d85d..214a0680524b0 100644 --- a/sound/hda/hdac_stream.c +++ b/sound/hda/hdac_stream.c @@ -354,8 +354,10 @@ struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus, struct hdac_stream *res = NULL;
/* make a non-zero unique key for the substream */ - int key = (substream->pcm->device << 16) | (substream->number << 2) | - (substream->stream + 1); + int key = (substream->number << 2) | (substream->stream + 1); + + if (substream->pcm) + key |= (substream->pcm->device << 16);
spin_lock_irq(&bus->reg_lock); list_for_each_entry(azx_dev, &bus->stream_list, list) {
From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit 9e189e80dcb68528dea9e061d9704993f98cb84f ]
These gpio names are due to old DT bindings not following the "-gpio"/"-gpios" conventions. Handle it using a quirk so the driver can just look up the GPIOs.
Signed-off-by: Linus Walleij linus.walleij@linaro.org Acked-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Link: https://lore.kernel.org/r/20231006-descriptors-asoc-mediatek-v1-1-07fe79f337... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib-of.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index 531faabead0f4..d9525d95e818d 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -512,6 +512,10 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np, #if IS_ENABLED(CONFIG_SND_SOC_CS42L56) { "reset", "cirrus,gpio-nreset", "cirrus,cs42l56" }, #endif +#if IS_ENABLED(CONFIG_SND_SOC_MT2701_CS42448) + { "i2s1-in-sel-gpio1", NULL, "mediatek,mt2701-cs42448-machine" }, + { "i2s1-in-sel-gpio2", NULL, "mediatek,mt2701-cs42448-machine" }, +#endif #if IS_ENABLED(CONFIG_SND_SOC_TLV320AIC3X) { "reset", "gpio-reset", "ti,tlv320aic3x" }, { "reset", "gpio-reset", "ti,tlv320aic33" },
From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com
[ Upstream commit 759574abd78e3b47ec45bbd31a64e8832cf73f97 ]
Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of custom masking and shifting.
Similarly, change custom code that misleadingly used PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW).
Link: https://lore.kernel.org/r/20230919125648.1920-5-ilpo.jarvinen@linux.intel.co... Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pcie-tegra194.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index 4bba31502ce1d..248cd9347e8fd 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -9,6 +9,7 @@ * Author: Vidya Sagar vidyas@nvidia.com */
+#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/debugfs.h> #include <linux/delay.h> @@ -346,8 +347,7 @@ static void apply_bad_link_workaround(struct dw_pcie_rp *pp) */ val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA); if (val & PCI_EXP_LNKSTA_LBMS) { - current_link_width = (val & PCI_EXP_LNKSTA_NLW) >> - PCI_EXP_LNKSTA_NLW_SHIFT; + current_link_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val); if (pcie->init_link_width > current_link_width) { dev_warn(pci->dev, "PCIe link is bad, width reduced\n"); val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + @@ -760,8 +760,7 @@ static void tegra_pcie_enable_system_interrupts(struct dw_pcie_rp *pp)
val_w = dw_pcie_readw_dbi(&pcie->pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA); - pcie->init_link_width = (val_w & PCI_EXP_LNKSTA_NLW) >> - PCI_EXP_LNKSTA_NLW_SHIFT; + pcie->init_link_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val_w);
val_w = dw_pcie_readw_dbi(&pcie->pci, pcie->pcie_cap_base + PCI_EXP_LNKCTL); @@ -920,7 +919,7 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp) /* Configure Max lane width from DT */ val = dw_pcie_readl_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP); val &= ~PCI_EXP_LNKCAP_MLW; - val |= (pcie->num_lanes << PCI_EXP_LNKSTA_NLW_SHIFT); + val |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, pcie->num_lanes); dw_pcie_writel_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP, val);
/* Clear Slot Clock Configuration bit if SRNS configuration */
From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com
[ Upstream commit 408599ec561ad5862cda4f107626009f6fa97a74 ]
mvebu_pcie_setup_hw() setups the Maximum Link Width field in the Link Capabilities registers using an open-coded variant of FIELD_PREP() with a literal in shift. Improve readability by using FIELD_PREP(PCI_EXP_LNKCAP_MLW, ...).
Link: https://lore.kernel.org/r/20230919125648.1920-6-ilpo.jarvinen@linux.intel.co... Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-mvebu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c index 60810a1fbfb75..29fe09c99e7d9 100644 --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -264,7 +264,7 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) */ lnkcap = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP); lnkcap &= ~PCI_EXP_LNKCAP_MLW; - lnkcap |= (port->is_x4 ? 4 : 1) << 4; + lnkcap |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, port->is_x4 ? 4 : 1); mvebu_writel(port, lnkcap, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
/* Disable Root Bridge I/O space, memory space and bus mastering. */
From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com
[ Upstream commit c28742447ca9879b52fbaf022ad844f0ffcd749c ]
In get_esi() PCI errors are checked inside line-split "if" conditions (in addition to the file not following the coding style). To make the code in get_esi() more readable, fix the coding style and use the usual error handling pattern with a separate variable.
In addition, initialization of 'error' variable at declaration is not needed.
No functional changes intended.
Link: https://lore.kernel.org/r/20230911125354.25501-4-ilpo.jarvinen@linux.intel.c... Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/iphase.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 3241486869530..9bba8f280a4d4 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2291,19 +2291,21 @@ static int get_esi(struct atm_dev *dev) static int reset_sar(struct atm_dev *dev) { IADEV *iadev; - int i, error = 1; + int i, error; unsigned int pci[64]; iadev = INPH_IA_DEV(dev); - for(i=0; i<64; i++) - if ((error = pci_read_config_dword(iadev->pci, - i*4, &pci[i])) != PCIBIOS_SUCCESSFUL) - return error; + for (i = 0; i < 64; i++) { + error = pci_read_config_dword(iadev->pci, i * 4, &pci[i]); + if (error != PCIBIOS_SUCCESSFUL) + return error; + } writel(0, iadev->reg+IPHASE5575_EXT_RESET); - for(i=0; i<64; i++) - if ((error = pci_write_config_dword(iadev->pci, - i*4, pci[i])) != PCIBIOS_SUCCESSFUL) - return error; + for (i = 0; i < 64; i++) { + error = pci_write_config_dword(iadev->pci, i * 4, pci[i]); + if (error != PCIBIOS_SUCCESSFUL) + return error; + } udelay(5); return 0; }
From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com
[ Upstream commit d15f18053e5cc5576af9e7eef0b2a91169b6326d ]
Placing PCI error code check inside "if" condition usually results in need to split lines. Combined with additional conditions the "if" condition becomes messy.
Convert to the usual error handling pattern with an additional variable to improve code readability. In addition, reverse the logic in pci_find_vsec_capability() to get rid of &&.
No functional changes intended.
Link: https://lore.kernel.org/r/20230911125354.25501-5-ilpo.jarvinen@linux.intel.c... Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com [bhelgaas: PCI_POSSIBLE_ERROR()] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 9 ++++++--- drivers/pci/probe.c | 6 +++--- drivers/pci/quirks.c | 6 +++--- 3 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 59c01d68c6d5e..5e51e8bd5c13a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -732,15 +732,18 @@ u16 pci_find_vsec_capability(struct pci_dev *dev, u16 vendor, int cap) { u16 vsec = 0; u32 header; + int ret;
if (vendor != dev->vendor) return 0;
while ((vsec = pci_find_next_ext_capability(dev, vsec, PCI_EXT_CAP_ID_VNDR))) { - if (pci_read_config_dword(dev, vsec + PCI_VNDR_HEADER, - &header) == PCIBIOS_SUCCESSFUL && - PCI_VNDR_HEADER_ID(header) == cap) + ret = pci_read_config_dword(dev, vsec + PCI_VNDR_HEADER, &header); + if (ret != PCIBIOS_SUCCESSFUL) + continue; + + if (PCI_VNDR_HEADER_ID(header) == cap) return vsec; }
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 795534589b985..43159965e09e9 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1652,15 +1652,15 @@ static void pci_set_removable(struct pci_dev *dev) static bool pci_ext_cfg_is_aliased(struct pci_dev *dev) { #ifdef CONFIG_PCI_QUIRKS - int pos; + int pos, ret; u32 header, tmp;
pci_read_config_dword(dev, PCI_VENDOR_ID, &header);
for (pos = PCI_CFG_SPACE_SIZE; pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) { - if (pci_read_config_dword(dev, pos, &tmp) != PCIBIOS_SUCCESSFUL - || header != tmp) + ret = pci_read_config_dword(dev, pos, &tmp); + if ((ret != PCIBIOS_SUCCESSFUL) || (header != tmp)) return false; }
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index eeec1d6f90238..f5fc92441194d 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5383,7 +5383,7 @@ int pci_dev_specific_disable_acs_redir(struct pci_dev *dev) */ static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) { - int pos, i = 0; + int pos, i = 0, ret; u8 next_cap; u16 reg16, *cap; struct pci_cap_saved_state *state; @@ -5429,8 +5429,8 @@ static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; - if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) != - PCIBIOS_SUCCESSFUL || (status == 0xffffffff)) + ret = pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status); + if ((ret != PCIBIOS_SUCCESSFUL) || (PCI_POSSIBLE_ERROR(status))) pdev->cfg_size = PCI_CFG_SPACE_SIZE;
if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP))
From: Wenchao Hao haowenchao2@huawei.com
[ Upstream commit 4df105f0ce9f6f30cda4e99f577150d23f0c9c5f ]
fc_lport_ptp_setup() did not check the return value of fc_rport_create() which can return NULL and would cause a NULL pointer dereference. Address this issue by checking return value of fc_rport_create() and log error message on fc_rport_create() failed.
Signed-off-by: Wenchao Hao haowenchao2@huawei.com Link: https://lore.kernel.org/r/20231011130350.819571-1-haowenchao2@huawei.com Reviewed-by: Simon Horman horms@kernel.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libfc/fc_lport.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 9c02c9523c4d4..ab06e9aeb613e 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -241,6 +241,12 @@ static void fc_lport_ptp_setup(struct fc_lport *lport, } mutex_lock(&lport->disc.disc_mutex); lport->ptp_rdata = fc_rport_create(lport, remote_fid); + if (!lport->ptp_rdata) { + printk(KERN_WARNING "libfc: Failed to setup lport 0x%x\n", + lport->port_id); + mutex_unlock(&lport->disc.disc_mutex); + return; + } kref_get(&lport->ptp_rdata->kref); lport->ptp_rdata->ids.port_name = remote_wwpn; lport->ptp_rdata->ids.node_name = remote_wwnn;
From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com
[ Upstream commit d1f9b39da4a5347150246871325190018cda8cb3 ]
Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields instead of custom masking and shifting.
Link: https://lore.kernel.org/r/20230919125648.1920-7-ilpo.jarvinen@linux.intel.co... Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com [bhelgaas: drop duplicate include of <linux/bitfield.h>] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci-sysfs.c | 5 ++--- drivers/pci/pci.c | 5 ++--- 2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index d9eede2dbc0e1..5a6241044c3c8 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -12,7 +12,7 @@ * Modeled after usb's driverfs.c */
- +#include <linux/bitfield.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/pci.h> @@ -230,8 +230,7 @@ static ssize_t current_link_width_show(struct device *dev, if (err) return -EINVAL;
- return sysfs_emit(buf, "%u\n", - (linkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT); + return sysfs_emit(buf, "%u\n", FIELD_GET(PCI_EXP_LNKSTA_NLW, linkstat)); } static DEVICE_ATTR_RO(current_link_width);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5e51e8bd5c13a..ec43ebfc24a5d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -6260,8 +6260,7 @@ u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev, pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
next_speed = pcie_link_speed[lnksta & PCI_EXP_LNKSTA_CLS]; - next_width = (lnksta & PCI_EXP_LNKSTA_NLW) >> - PCI_EXP_LNKSTA_NLW_SHIFT; + next_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
next_bw = next_width * PCIE_SPEED2MBS_ENC(next_speed);
@@ -6333,7 +6332,7 @@ enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev)
pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); if (lnkcap) - return (lnkcap & PCI_EXP_LNKCAP_MLW) >> 4; + return FIELD_GET(PCI_EXP_LNKCAP_MLW, lnkcap);
return PCIE_LNK_WIDTH_UNKNOWN; }
From: Bartosz Pawlowski bartosz.pawlowski@intel.com
[ Upstream commit f18b1137d38c091cc8c16365219f0a1d4a30b3d1 ]
Introduce quirk_no_ats() helper function to provide a standard way to disable ATS capability in PCI quirks.
Suggested-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20230908143606.685930-2-bartosz.pawlowski@intel.co... Signed-off-by: Bartosz Pawlowski bartosz.pawlowski@intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f5fc92441194d..81b3805c6d392 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5507,6 +5507,12 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0420, quirk_no_ext_tags); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0422, quirk_no_ext_tags);
#ifdef CONFIG_PCI_ATS +static void quirk_no_ats(struct pci_dev *pdev) +{ + pci_info(pdev, "disabling ATS\n"); + pdev->ats_cap = 0; +} + /* * Some devices require additional driver setup to enable ATS. Don't use * ATS for those devices as ATS will be enabled before the driver has had a @@ -5520,14 +5526,10 @@ static void quirk_amd_harvest_no_ats(struct pci_dev *pdev) (pdev->subsystem_device == 0xce19 || pdev->subsystem_device == 0xcc10 || pdev->subsystem_device == 0xcc08)) - goto no_ats; - else - return; + quirk_no_ats(pdev); + } else { + quirk_no_ats(pdev); } - -no_ats: - pci_info(pdev, "disabling ATS\n"); - pdev->ats_cap = 0; }
/* AMD Stoney platform GPU */
From: Bartosz Pawlowski bartosz.pawlowski@intel.com
[ Upstream commit a18615b1cfc04f00548c60eb9a77e0ce56e848fd ]
Due to a hardware issue in A and B steppings of Intel IPU E2000, it expects wrong endianness in ATS invalidation message body. This problem can lead to outdated translations being returned as valid and finally cause system instability.
To prevent such issues, add quirk_intel_e2000_no_ats() to disable ATS for vulnerable IPU E2000 devices.
Link: https://lore.kernel.org/r/20230908143606.685930-3-bartosz.pawlowski@intel.co... Signed-off-by: Bartosz Pawlowski bartosz.pawlowski@intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Alexander Lobakin aleksander.lobakin@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 81b3805c6d392..96fd0e6048ee2 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -5552,6 +5552,25 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7347, quirk_amd_harvest_no_ats); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x734f, quirk_amd_harvest_no_ats); /* AMD Raven platform iGPU */ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x15d8, quirk_amd_harvest_no_ats); + +/* + * Intel IPU E2000 revisions before C0 implement incorrect endianness + * in ATS Invalidate Request message body. Disable ATS for those devices. + */ +static void quirk_intel_e2000_no_ats(struct pci_dev *pdev) +{ + if (pdev->revision < 0x20) + quirk_no_ats(pdev); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1451, quirk_intel_e2000_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1452, quirk_intel_e2000_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1453, quirk_intel_e2000_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1454, quirk_intel_e2000_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1455, quirk_intel_e2000_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1457, quirk_intel_e2000_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1459, quirk_intel_e2000_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145a, quirk_intel_e2000_no_ats); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145c, quirk_intel_e2000_no_ats); #endif /* CONFIG_PCI_ATS */
/* Freescale PCIe doesn't support MSI in RC mode */
From: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com
[ Upstream commit a9a1bcba90254975d4adbcca53f720318cf81c0c ]
This is a preparation before adding the Max-Link-width capability setup which would in its turn complete the max-link-width setup procedure defined by Synopsys in the HW-manual.
Seeing there is a max-link-speed setup method defined in the DW PCIe core driver it would be good to have a similar function for the link width setup.
That's why we need to define a dedicated function first from already implemented but incomplete link-width setting up code.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-3-yoshihiro.shimoda... Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Reviewed-by: Manivannan Sadhasivam mani@kernel.org Reviewed-by: Serge Semin fancer.lancer@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pcie-designware.c | 86 ++++++++++---------- 1 file changed, 41 insertions(+), 45 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 1c1c7348972b0..da4aba4aee623 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -732,6 +732,46 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
}
+static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes) +{ + u32 lwsc, plc; + + if (!num_lanes) + return; + + /* Set the number of lanes */ + plc = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); + plc &= ~PORT_LINK_FAST_LINK_MODE; + plc &= ~PORT_LINK_MODE_MASK; + + /* Set link width speed control register */ + lwsc = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); + lwsc &= ~PORT_LOGIC_LINK_WIDTH_MASK; + switch (num_lanes) { + case 1: + plc |= PORT_LINK_MODE_1_LANES; + lwsc |= PORT_LOGIC_LINK_WIDTH_1_LANES; + break; + case 2: + plc |= PORT_LINK_MODE_2_LANES; + lwsc |= PORT_LOGIC_LINK_WIDTH_2_LANES; + break; + case 4: + plc |= PORT_LINK_MODE_4_LANES; + lwsc |= PORT_LOGIC_LINK_WIDTH_4_LANES; + break; + case 8: + plc |= PORT_LINK_MODE_8_LANES; + lwsc |= PORT_LOGIC_LINK_WIDTH_8_LANES; + break; + default: + dev_err(pci->dev, "num-lanes %u: invalid value\n", num_lanes); + return; + } + dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, plc); + dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, lwsc); +} + void dw_pcie_iatu_detect(struct dw_pcie *pci) { int max_region, ob, ib; @@ -1013,49 +1053,5 @@ void dw_pcie_setup(struct dw_pcie *pci) val |= PORT_LINK_DLL_LINK_EN; dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
- if (!pci->num_lanes) { - dev_dbg(pci->dev, "Using h/w default number of lanes\n"); - return; - } - - /* Set the number of lanes */ - val &= ~PORT_LINK_FAST_LINK_MODE; - val &= ~PORT_LINK_MODE_MASK; - switch (pci->num_lanes) { - case 1: - val |= PORT_LINK_MODE_1_LANES; - break; - case 2: - val |= PORT_LINK_MODE_2_LANES; - break; - case 4: - val |= PORT_LINK_MODE_4_LANES; - break; - case 8: - val |= PORT_LINK_MODE_8_LANES; - break; - default: - dev_err(pci->dev, "num-lanes %u: invalid value\n", pci->num_lanes); - return; - } - dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val); - - /* Set link width speed control register */ - val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); - val &= ~PORT_LOGIC_LINK_WIDTH_MASK; - switch (pci->num_lanes) { - case 1: - val |= PORT_LOGIC_LINK_WIDTH_1_LANES; - break; - case 2: - val |= PORT_LOGIC_LINK_WIDTH_2_LANES; - break; - case 4: - val |= PORT_LOGIC_LINK_WIDTH_4_LANES; - break; - case 8: - val |= PORT_LOGIC_LINK_WIDTH_8_LANES; - break; - } - dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); + dw_pcie_link_set_max_link_width(pci, pci->num_lanes); }
From: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com
[ Upstream commit 89db0793c9f2da265ecb6c1681f899d9af157f37 ]
Update dw_pcie_link_set_max_link_width() to set PCI_EXP_LNKCAP_MLW.
In accordance with the DW PCIe RC/EP HW manuals [1,2,3,...] aside with the PORT_LINK_CTRL_OFF.LINK_CAPABLE and GEN2_CTRL_OFF.NUM_OF_LANES[8:0] field there is another one which needs to be updated.
It's LINK_CAPABILITIES_REG.PCIE_CAP_MAX_LINK_WIDTH. If it isn't done at the very least the maximum link-width capability CSR won't expose the actual maximum capability.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, Version 4.60a, March 2015, p.1032 [2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, Version 4.70a, March 2016, p.1065 [3] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, Version 4.90a, March 2016, p.1057 ... [X] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint, Version 5.40a, March 2019, p.1396 [X+1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, Version 5.40a, March 2019, p.1266
Suggested-by: Serge Semin fancer.lancer@gmail.com Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-4-yoshihiro.shimoda... Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Reviewed-by: Serge Semin fancer.lancer@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pcie-designware.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index da4aba4aee623..2b60d20dfdf59 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -734,7 +734,8 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes) { - u32 lwsc, plc; + u32 lnkcap, lwsc, plc; + u8 cap;
if (!num_lanes) return; @@ -770,6 +771,12 @@ static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes) } dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, plc); dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, lwsc); + + cap = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); + lnkcap = dw_pcie_readl_dbi(pci, cap + PCI_EXP_LNKCAP); + lnkcap &= ~PCI_EXP_LNKCAP_MLW; + lnkcap |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, num_lanes); + dw_pcie_writel_dbi(pci, cap + PCI_EXP_LNKCAP, lnkcap); }
void dw_pcie_iatu_detect(struct dw_pcie *pci)
From: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com
[ Upstream commit 6c4b39937f4e65688ea294725ae432b2565821ff ]
Add Renesas R8A779F0 in pci_device_id table so that pci-epf-test can be used for testing PCIe EP on R-Car S4-8.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-16-yoshihiro.shimod... Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Signed-off-by: Krzysztof Wilczyński kwilczynski@kernel.org Acked-by: Manivannan Sadhasivam mani@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/pci_endpoint_test.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index ed4d0ef5e5c31..150083dab71a3 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -81,6 +81,7 @@ #define PCI_DEVICE_ID_RENESAS_R8A774B1 0x002b #define PCI_DEVICE_ID_RENESAS_R8A774C0 0x002d #define PCI_DEVICE_ID_RENESAS_R8A774E1 0x0025 +#define PCI_DEVICE_ID_RENESAS_R8A779F0 0x0031
static DEFINE_IDA(pci_endpoint_test_ida);
@@ -990,6 +991,9 @@ static const struct pci_device_id pci_endpoint_test_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A774B1),}, { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A774C0),}, { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A774E1),}, + { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_R8A779F0), + .driver_data = (kernel_ulong_t)&default_data, + }, { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721E), .driver_data = (kernel_ulong_t)&j721e_data, },
From: Bjorn Helgaas bhelgaas@google.com
[ Upstream commit 04e82fa5951ca66495d7b05665eff673aa3852b4 ]
Use FIELD_GET() to remove dependences on the field position, i.e., the shift value. No functional change intended.
Separate because this isn't as trivial as the other FIELD_GET() changes.
See 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse")
Link: https://lore.kernel.org/r/20231010204436.1000644-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Reviewed-by: Kuppuswamy Sathyanarayanan sathyanarayanan.kuppuswamy@linux.intel.com Cc: Nirmoy Das nirmoy.das@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ec43ebfc24a5d..a607f277ccf10 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3755,14 +3755,14 @@ u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar) return 0;
pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap); - cap &= PCI_REBAR_CAP_SIZES; + cap = FIELD_GET(PCI_REBAR_CAP_SIZES, cap);
/* Sapphire RX 5600 XT Pulse has an invalid cap dword for BAR 0 */ if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x731f && - bar == 0 && cap == 0x7000) - cap = 0x3f000; + bar == 0 && cap == 0x700) + return 0x3f00;
- return cap >> 4; + return cap; } EXPORT_SYMBOL(pci_rebar_get_possible_sizes);
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 2cb54788393134d8174ee594002baae3ce52c61e ]
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with a custom kernel as factory OS, does not list the used WM5102 codec inside its DSDT.
Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry which matches on the SST id instead of the codec id like nocodec does, combined with using a machine_quirk callback which returns NULL on other machines to skip the new entry on other machines.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20231021211534.114991-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../intel/common/soc-acpi-intel-cht-match.c | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+)
diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c index cdcbf04b8832f..5e2ec60e2954b 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cht-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c @@ -75,6 +75,39 @@ static struct snd_soc_acpi_mach *cht_ess8316_quirk(void *arg) return arg; }
+/* + * The Lenovo Yoga Tab 3 Pro YT3-X90, with Android factory OS has a buggy DSDT + * with the coded not being listed at all. + */ +static const struct dmi_system_id lenovo_yoga_tab3_x90[] = { + { + /* Lenovo Yoga Tab 3 Pro YT3-X90, codec missing from DSDT */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"), + }, + }, + { } +}; + +static struct snd_soc_acpi_mach cht_lenovo_yoga_tab3_x90_mach = { + .id = "10WM5102", + .drv_name = "bytcr_wm5102", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcr_wm5102", + .sof_tplg_filename = "sof-cht-wm5102.tplg", +}; + +static struct snd_soc_acpi_mach *lenovo_yt3_x90_quirk(void *arg) +{ + if (dmi_check_system(lenovo_yoga_tab3_x90)) + return &cht_lenovo_yoga_tab3_x90_mach; + + /* Skip wildcard match snd_soc_acpi_intel_cherrytrail_machines[] entry */ + return NULL; +} + static const struct snd_soc_acpi_codecs rt5640_comp_ids = { .num_codecs = 2, .codecs = { "10EC5640", "10EC3276" }, @@ -175,6 +208,16 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "sof_pcm512x", .sof_tplg_filename = "sof-cht-src-50khz-pcm512x.tplg", }, + /* + * Special case for the Lenovo Yoga Tab 3 Pro YT3-X90 where the DSDT + * misses the codec. Match on the SST id instead, lenovo_yt3_x90_quirk() + * will return a YT3 specific mach or NULL when called on other hw, + * skipping this entry. + */ + { + .id = "808622A8", + .machine_quirk = lenovo_yt3_x90_quirk, + },
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) /*
From: Longfang Liu liulongfang@huawei.com
[ Upstream commit 33fc506d2ac514be1072499a263c3bff8c7c95a0 ]
In the scenario where the accelerator business is fully loaded. When the workqueue receiving messages and performing callback processing, there are a large number of messages that need to be received, and there are continuously messages that have been processed and need to be received. This will cause the receive loop here to be locked for a long time. This scenario will cause watchdog timeout problems on OS with kernel preemption turned off.
The error logs: watchdog: BUG: soft lockup - CPU#23 stuck for 23s! [kworker/u262:1:1407] [ 1461.978428][ C23] Call trace: [ 1461.981890][ C23] complete+0x8c/0xf0 [ 1461.986031][ C23] kcryptd_async_done+0x154/0x1f4 [dm_crypt] [ 1461.992154][ C23] sec_skcipher_callback+0x7c/0xf4 [hisi_sec2] [ 1461.998446][ C23] sec_req_cb+0x104/0x1f4 [hisi_sec2] [ 1462.003950][ C23] qm_poll_req_cb+0xcc/0x150 [hisi_qm] [ 1462.009531][ C23] qm_work_process+0x60/0xc0 [hisi_qm] [ 1462.015101][ C23] process_one_work+0x1c4/0x470 [ 1462.020052][ C23] worker_thread+0x150/0x3c4 [ 1462.024735][ C23] kthread+0x108/0x13c [ 1462.028889][ C23] ret_from_fork+0x10/0x18
Therefore, it is necessary to add an actively scheduled operation in the while loop to prevent this problem. After adding it, no matter whether the OS turns on or off the kernel preemption function. Neither will cause watchdog timeout issues.
Signed-off-by: Longfang Liu liulongfang@huawei.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/hisilicon/qm.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index a99fd589445ce..a830a2e0f4400 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -849,6 +849,8 @@ static void qm_poll_req_cb(struct hisi_qp *qp) qm_db(qm, qp->qp_id, QM_DOORBELL_CMD_CQ, qp->qp_status.cq_head, 0); atomic_dec(&qp->qp_status.used); + + cond_resched(); }
/* set c_flag */
From: Jiri Kosina jkosina@suse.cz
[ Upstream commit 62cc9c3cb3ec1bf31cc116146185ed97b450836a ]
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting indefinitely.
Reported-by: Robert Ayrapetyan robert.ayrapetyan@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e4d2dfd5d2536..f7973ccd84a28 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -366,6 +366,7 @@
#define USB_VENDOR_ID_DELL 0x413c #define USB_DEVICE_ID_DELL_PIXART_USB_OPTICAL_MOUSE 0x301a +#define USB_DEVICE_ID_DELL_PRO_WIRELESS_KM5221W 0x4503
#define USB_VENDOR_ID_DELORME 0x1163 #define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 3983b4f282f8f..5a48fcaa32f00 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -66,6 +66,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_STRAFE), HID_QUIRK_NO_INIT_REPORTS | HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_PRO_WIRELESS_KM5221W), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_DRACAL_RAPHNET, USB_DEVICE_ID_RAPHNET_2NES2SNES), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_DRACAL_RAPHNET, USB_DEVICE_ID_RAPHNET_4NES4SNES), HID_QUIRK_MULTI_INPUT },
From: Yuezhang Mo Yuezhang.Mo@sony.com
[ Upstream commit dab48b8f2fe7264d51ec9eed0adea0fe3c78830a ]
After repairing a corrupted file system with exfatprogs' fsck.exfat, zero-size directories may result. It is also possible to create zero-size directories in other exFAT implementation, such as Paragon ufsd dirver.
As described in the specification, the lower directory size limits is 0 bytes.
Without this commit, sub-directories and files cannot be created under a zero-size directory, and it cannot be removed.
Signed-off-by: Yuezhang Mo Yuezhang.Mo@sony.com Reviewed-by: Andy Wu Andy.Wu@sony.com Reviewed-by: Aoyama Wataru wataru.aoyama@sony.com Signed-off-by: Namjae Jeon linkinjeon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/exfat/namei.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-)
diff --git a/fs/exfat/namei.c b/fs/exfat/namei.c index 1b9f587f6cca5..95c51b025b917 100644 --- a/fs/exfat/namei.c +++ b/fs/exfat/namei.c @@ -351,14 +351,20 @@ static int exfat_find_empty_entry(struct inode *inode, if (exfat_check_max_dentries(inode)) return -ENOSPC;
- /* we trust p_dir->size regardless of FAT type */ - if (exfat_find_last_cluster(sb, p_dir, &last_clu)) - return -EIO; - /* * Allocate new cluster to this directory */ - exfat_chain_set(&clu, last_clu + 1, 0, p_dir->flags); + if (ei->start_clu != EXFAT_EOF_CLUSTER) { + /* we trust p_dir->size regardless of FAT type */ + if (exfat_find_last_cluster(sb, p_dir, &last_clu)) + return -EIO; + + exfat_chain_set(&clu, last_clu + 1, 0, p_dir->flags); + } else { + /* This directory is empty */ + exfat_chain_set(&clu, EXFAT_EOF_CLUSTER, 0, + ALLOC_NO_FAT_CHAIN); + }
/* allocate a cluster */ ret = exfat_alloc_cluster(inode, 1, &clu, IS_DIRSYNC(inode)); @@ -368,6 +374,11 @@ static int exfat_find_empty_entry(struct inode *inode, if (exfat_zeroed_cluster(inode, clu.dir)) return -EIO;
+ if (ei->start_clu == EXFAT_EOF_CLUSTER) { + ei->start_clu = clu.dir; + p_dir->dir = clu.dir; + } + /* append to the FAT chain */ if (clu.flags != p_dir->flags) { /* no-fat-chain bit is disabled, @@ -645,7 +656,7 @@ static int exfat_find(struct inode *dir, struct qstr *qname, info->type = exfat_get_entry_type(ep); info->attr = le16_to_cpu(ep->dentry.file.attr); info->size = le64_to_cpu(ep2->dentry.stream.valid_size); - if ((info->type == TYPE_FILE) && (info->size == 0)) { + if (info->size == 0) { info->flags = ALLOC_NO_FAT_CHAIN; info->start_clu = EXFAT_EOF_CLUSTER; } else { @@ -888,6 +899,9 @@ static int exfat_check_dir_empty(struct super_block *sb,
dentries_per_clu = sbi->dentries_per_clu;
+ if (p_dir->dir == EXFAT_EOF_CLUSTER) + return 0; + exfat_chain_dup(&clu, p_dir);
while (clu.dir != EXFAT_EOF_CLUSTER) { @@ -1255,7 +1269,8 @@ static int __exfat_rename(struct inode *old_parent_inode, }
/* Free the clusters if new_inode is a dir(as if exfat_rmdir) */ - if (new_entry_type == TYPE_DIR) { + if (new_entry_type == TYPE_DIR && + new_ei->start_clu != EXFAT_EOF_CLUSTER) { /* new_ei, new_clu_to_free */ struct exfat_chain new_clu_to_free;
From: Jarkko Nikula jarkko.nikula@linux.intel.com
[ Upstream commit e53b22b10c6e0de0cf2a03a92b18fdad70f266c7 ]
Add Intel Lunar Lake-M SoC PCI IDs.
Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com Link: https://lore.kernel.org/r/20231002083344.75611-1-jarkko.nikula@linux.intel.c... Signed-off-by: Lee Jones lee@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mfd/intel-lpss-pci.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index 699f44ffff0e4..ae5759200622c 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -561,6 +561,19 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0xa3e2), (kernel_ulong_t)&spt_i2c_info }, { PCI_VDEVICE(INTEL, 0xa3e3), (kernel_ulong_t)&spt_i2c_info }, { PCI_VDEVICE(INTEL, 0xa3e6), (kernel_ulong_t)&spt_uart_info }, + /* LNL-M */ + { PCI_VDEVICE(INTEL, 0xa825), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0xa826), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0xa827), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0xa830), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0xa846), (kernel_ulong_t)&tgl_info }, + { PCI_VDEVICE(INTEL, 0xa850), (kernel_ulong_t)&ehl_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa851), (kernel_ulong_t)&ehl_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa852), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0xa878), (kernel_ulong_t)&ehl_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa879), (kernel_ulong_t)&ehl_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa87a), (kernel_ulong_t)&ehl_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa87b), (kernel_ulong_t)&ehl_i2c_info }, { } }; MODULE_DEVICE_TABLE(pci, intel_lpss_pci_ids);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin