From: Navid Emamdoost navid.emamdoost@gmail.com
[ Upstream commit e6f390a834b56583e6fc0949822644ce92fbb107 ]
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20200605025207.65719-1-navid.emamdoost@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-arizona.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c index ba51ea15f3794..485aa45fc5d53 100644 --- a/drivers/gpio/gpio-arizona.c +++ b/drivers/gpio/gpio-arizona.c @@ -111,6 +111,7 @@ static int arizona_gpio_direction_out(struct gpio_chip *chip, ret = pm_runtime_get_sync(chip->parent); if (ret < 0) { dev_err(chip->parent, "Failed to resume: %d\n", ret); + pm_runtime_put(chip->parent); return ret; } }
From: Navid Emamdoost navid.emamdoost@gmail.com
[ Upstream commit 861254d826499944cb4d9b5a15f5a794a6b99a69 ]
Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20200605030052.78235-1-navid.emamdoost@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-arizona.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c index 485aa45fc5d53..c6cf270035b56 100644 --- a/drivers/gpio/gpio-arizona.c +++ b/drivers/gpio/gpio-arizona.c @@ -69,6 +69,7 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset) ret = pm_runtime_get_sync(chip->parent); if (ret < 0) { dev_err(chip->parent, "Failed to resume: %d\n", ret); + pm_runtime_put_autosuspend(chip->parent); return ret; }
@@ -77,12 +78,15 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset) if (ret < 0) { dev_err(chip->parent, "Failed to drop cache: %d\n", ret); + pm_runtime_put_autosuspend(chip->parent); return ret; }
ret = regmap_read(arizona->regmap, reg, &val); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_autosuspend(chip->parent); return ret; + }
pm_runtime_mark_last_busy(chip->parent); pm_runtime_put_autosuspend(chip->parent);
From: Jacky Hu hengqing.hu@gmail.com
[ Upstream commit 69339d083dfb7786b0e0b3fc19eaddcf11fabdfb ]
uart0_pins is defined as: static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};
which npins is wronly specified as 9 later { .name = "uart0", .pins = uart0_pins, .npins = 9, },
npins should be 5 instead of 9 according to the definition.
Signed-off-by: Jacky Hu hengqing.hu@gmail.com Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-amd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-amd.h b/drivers/pinctrl/pinctrl-amd.h index 22af7edfdb38e..91da7527f0020 100644 --- a/drivers/pinctrl/pinctrl-amd.h +++ b/drivers/pinctrl/pinctrl-amd.h @@ -256,7 +256,7 @@ static const struct amd_pingroup kerncz_groups[] = { { .name = "uart0", .pins = uart0_pins, - .npins = 9, + .npins = 5, }, { .name = "uart1",
From: Markus Theil markus.theil@tu-ilmenau.de
[ Upstream commit 0b467b63870d9c05c81456aa9bfee894ab2db3b6 ]
Without this patch, eapol frames cannot be received in mesh mode, when 802.1X should be used. Initially only a MGTK is defined, which is found and set as rx->key, when there are no other keys set. ieee80211_drop_unencrypted would then drop these eapol frames, as they are data frames without encryption and there exists some rx->key.
Fix this by differentiating between mesh eapol frames and other data frames with existing rx->key. Allow mesh mesh eapol frames only if they are for our vif address.
With this patch in-place, ieee80211_rx_h_mesh_fwding continues after the ieee80211_drop_unencrypted check and notices, that these eapol frames have to be delivered locally, as they should.
Signed-off-by: Markus Theil markus.theil@tu-ilmenau.de Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de [small code cleanups] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/rx.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c17e148e06e71..5e56719f999c4 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2230,6 +2230,7 @@ static int ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx)
static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc) { + struct ieee80211_hdr *hdr = (void *)rx->skb->data; struct sk_buff *skb = rx->skb; struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
@@ -2240,6 +2241,31 @@ static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc) if (status->flag & RX_FLAG_DECRYPTED) return 0;
+ /* check mesh EAPOL frames first */ + if (unlikely(rx->sta && ieee80211_vif_is_mesh(&rx->sdata->vif) && + ieee80211_is_data(fc))) { + struct ieee80211s_hdr *mesh_hdr; + u16 hdr_len = ieee80211_hdrlen(fc); + u16 ethertype_offset; + __be16 ethertype; + + if (!ether_addr_equal(hdr->addr1, rx->sdata->vif.addr)) + goto drop_check; + + /* make sure fixed part of mesh header is there, also checks skb len */ + if (!pskb_may_pull(rx->skb, hdr_len + 6)) + goto drop_check; + + mesh_hdr = (struct ieee80211s_hdr *)(skb->data + hdr_len); + ethertype_offset = hdr_len + ieee80211_get_mesh_hdrlen(mesh_hdr) + + sizeof(rfc1042_header); + + if (skb_copy_bits(rx->skb, ethertype_offset, ðertype, 2) == 0 && + ethertype == rx->sdata->control_port_protocol) + return 0; + } + +drop_check: /* Drop unencrypted frames if key is set. */ if (unlikely(!ieee80211_has_protected(fc) && !ieee80211_is_any_nullfunc(fc) &&
From: Tom Rix trix@redhat.com
[ Upstream commit 5aee52c44d9170591df65fafa1cd408acc1225ce ]
clang static analysis flags several null function pointer problems.
drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage] spi_transport_max_attr(offset, "%d\n"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewing the store_spi_store_max macro
if (i->f->set_##field) return -EINVAL;
should be
if (!i->f->set_##field) return -EINVAL;
Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com Reviewed-by: James Bottomley jejb@linux.ibm.com Signed-off-by: Tom Rix trix@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_transport_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 40b85b752b794..69213842e63e0 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -352,7 +352,7 @@ store_spi_transport_##field(struct device *dev, \ struct spi_transport_attrs *tp \ = (struct spi_transport_attrs *)&starget->starget_data; \ \ - if (i->f->set_##field) \ + if (!i->f->set_##field) \ return -EINVAL; \ val = simple_strtoul(buf, NULL, 0); \ if (val > tp->max_##field) \
From: Max Filippov jcmvbkbc@gmail.com
[ Upstream commit 73f9941306d5ce030f3ffc7db425c7b2a798cf8e ]
Building xtensa kernel with gcc-10 produces the following warnings: arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types for built-in function ‘__sync_fetch_and_and_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch] arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types for built-in function ‘__sync_fetch_and_or_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch]
Fix declarations of these functions to avoid the warning.
Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/xtensa_ksyms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index 4092555828b13..24cf6972eacea 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -87,13 +87,13 @@ void __xtensa_libgcc_window_spill(void) } EXPORT_SYMBOL(__xtensa_libgcc_window_spill);
-unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v) +unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v) { BUG(); } EXPORT_SYMBOL(__sync_fetch_and_and_4);
-unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v) +unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v) { BUG(); }
From: Max Filippov jcmvbkbc@gmail.com
[ Upstream commit 0d5ab144429e8bd80889b856a44d56ab4a5cd59b ]
Increment *pos in the cpuinfo_op.next to fix the following warning triggered by cat /proc/cpuinfo:
seq_file: buggy .next function c_next did not update position index
Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 15580e4fc766a..6a0167ac803c6 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -720,7 +720,8 @@ c_start(struct seq_file *f, loff_t *pos) static void * c_next(struct seq_file *f, void *v, loff_t *pos) { - return NULL; + ++*pos; + return c_start(f, pos); }
static void
From: Xie He xie.he.0141@gmail.com
[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ]
When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes, then this driver will prepend a length field of 2 bytes, then the underlying Ethernet device will prepend its own header.
So, the header length required should be: -1 + 3 + 2 + "the header length needed by the underlying device".
This patch fixes kernel panic when this driver is used with AF_PACKET SOCK_DGRAM sockets.
Signed-off-by: Xie He xie.he.0141@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/lapbether.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 0e3f8ed84660e..ac34257e9f203 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -308,7 +308,6 @@ static void lapbeth_setup(struct net_device *dev) dev->netdev_ops = &lapbeth_netdev_ops; dev->needs_free_netdev = true; dev->type = ARPHRD_X25; - dev->hard_header_len = 3; dev->mtu = 1000; dev->addr_len = 0; } @@ -329,6 +328,14 @@ static int lapbeth_new_device(struct net_device *dev) if (!ndev) goto out;
+ /* When transmitting data: + * first this driver removes a pseudo header of 1 byte, + * then the lapb module prepends an LAPB header of at most 3 bytes, + * then this driver prepends a length field of 2 bytes, + * then the underlying Ethernet device prepends its own header. + */ + ndev->hard_header_len = -1 + 3 + 2 + dev->hard_header_len; + lapbeth = netdev_priv(ndev); lapbeth->axdev = ndev;
From: Kai Vehmanen kai.vehmanen@linux.intel.com
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ]
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs.
The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open.
The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins.
BugLink: https://github.com/thesofproject/linux/issues/1978 BugLink: https://github.com/thesofproject/linux/issues/2216 BugLink: https://github.com/thesofproject/linux/issues/2217 Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Kai Vehmanen kai.vehmanen@linux.intel.com Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_hdmi.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 419d099b5582b..1fc12e680f311 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1804,33 +1804,43 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
static int hdmi_parse_codec(struct hda_codec *codec) { - hda_nid_t nid; + hda_nid_t start_nid; + unsigned int caps; int i, nodes;
- nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &nid); - if (!nid || nodes < 0) { + nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &start_nid); + if (!start_nid || nodes < 0) { codec_warn(codec, "HDMI: failed to get afg sub nodes\n"); return -EINVAL; }
- for (i = 0; i < nodes; i++, nid++) { - unsigned int caps; - unsigned int type; + /* + * hdmi_add_pin() assumes total amount of converters to + * be known, so first discover all converters + */ + for (i = 0; i < nodes; i++) { + hda_nid_t nid = start_nid + i;
caps = get_wcaps(codec, nid); - type = get_wcaps_type(caps);
if (!(caps & AC_WCAP_DIGITAL)) continue;
- switch (type) { - case AC_WID_AUD_OUT: + if (get_wcaps_type(caps) == AC_WID_AUD_OUT) hdmi_add_cvt(codec, nid); - break; - case AC_WID_PIN: + } + + /* discover audio pins */ + for (i = 0; i < nodes; i++) { + hda_nid_t nid = start_nid + i; + + caps = get_wcaps(codec, nid); + + if (!(caps & AC_WCAP_DIGITAL)) + continue; + + if (get_wcaps_type(caps) == AC_WID_PIN) hdmi_add_pin(codec, nid); - break; - } }
return 0;
From: AceLan Kao acelan.kao@canonical.com
[ Upstream commit f815dd5cf48b905eeecf0a2b990e9b7ab048b4f1 ]
Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
Signed-off-by: AceLan Kao acelan.kao@canonical.com Acked-by: Bjørn Mork bjorn@mork.no Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 1f70e00838f26..ea3c891186147 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1305,6 +1305,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)}, /* Quectel EG95 */ {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */ {QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)}, /* Fibocom NL678 series */ {QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */
From: Tom Rix trix@redhat.com
[ Upstream commit 28b18e4eb515af7c6661c3995c6e3c34412c2874 ]
clang static analysis flags this garbage return
drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return v; ^~~~~~~~
static inline u16 gm_phy_read( ... { u16 v; __gm_phy_read(hw, port, reg, &v); return v; }
__gm_phy_read can return without setting v.
So handle similar to skge.c's gm_phy_read, initialize v.
Signed-off-by: Tom Rix trix@redhat.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/marvell/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index d013f30019b69..2452d8ba40730 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -215,7 +215,7 @@ static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) { - u16 v; + u16 v = 0; __gm_phy_read(hw, port, reg, &v); return v; }
From: Ben Skeggs bskeggs@redhat.com
[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ]
Tegra TRM says worst-case reply time is 1216us, and this should fix some spurious timeouts that have been popping up.
Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c | 4 ++-- drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c index c8ab1b5741a3e..db7769cb33eba 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c @@ -118,10 +118,10 @@ g94_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry, if (retries) udelay(400);
- /* transaction request, wait up to 1ms for it to complete */ + /* transaction request, wait up to 2ms for it to complete */ nvkm_wr32(device, 0x00e4e4 + base, 0x00010000 | ctrl);
- timeout = 1000; + timeout = 2000; do { ctrl = nvkm_rd32(device, 0x00e4e4 + base); udelay(1); diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c index 7ef60895f43a7..edb6148cbca04 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c @@ -118,10 +118,10 @@ gm200_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry, if (retries) udelay(400);
- /* transaction request, wait up to 1ms for it to complete */ + /* transaction request, wait up to 2ms for it to complete */ nvkm_wr32(device, 0x00d954 + base, 0x00010000 | ctrl);
- timeout = 1000; + timeout = 2000; do { ctrl = nvkm_rd32(device, 0x00d954 + base); udelay(1);
From: Gavin Shan gshan@redhat.com
[ Upstream commit c377e67c6271954969384f9be1b1b71de13eba30 ]
The CPU mask (@tmp) should be released on failing to allocate @cpu_groups or any of its elements. Otherwise, it leads to memory leakage because the CPU mask variable is dynamically allocated when CONFIG_CPUMASK_OFFSTACK is enabled.
Signed-off-by: Gavin Shan gshan@redhat.com Reviewed-by: Sudeep Holla sudeep.holla@arm.com Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/psci_checker.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci_checker.c index cbd53cb1b2d47..9f1a913933d53 100644 --- a/drivers/firmware/psci_checker.c +++ b/drivers/firmware/psci_checker.c @@ -164,8 +164,10 @@ static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups)
cpu_groups = kcalloc(nb_available_cpus, sizeof(cpu_groups), GFP_KERNEL); - if (!cpu_groups) + if (!cpu_groups) { + free_cpumask_var(tmp); return -ENOMEM; + }
cpumask_copy(tmp, cpu_online_mask);
@@ -174,6 +176,7 @@ static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups) topology_core_cpumask(cpumask_any(tmp));
if (!alloc_cpumask_var(&cpu_groups[num_groups], GFP_KERNEL)) { + free_cpumask_var(tmp); free_cpu_groups(num_groups, &cpu_groups); return -ENOMEM; }
linux-stable-mirror@lists.linaro.org